scube/Marlin/ultralcd_impl_DOGM.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * ultralcd_impl_DOGM.h
 *
 * Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
 * Demonstrator: http://www.reprap.org/wiki/STB_Electronics
 * License: http://opensource.org/licenses/BSD-3-Clause
 *
 * With the use of:
 * u8glib by Oliver Kraus
 * https://github.com/olikraus/U8glib_Arduino
 * License: http://opensource.org/licenses/BSD-3-Clause
 */

#ifndef ULTRALCD_IMPL_DOGM_H
#define ULTRALCD_IMPL_DOGM_H

#include "MarlinConfig.h"

/**
 * Implementation of the LCD display routines for a DOGM128 graphic display.
 * These are common LCD 128x64 pixel graphic displays.
 */
#include "ultralcd.h"
#include "ultralcd_st7920_u8glib_rrd.h"
#include "dogm_bitmaps.h"
#include "utility.h"
#include "duration_t.h"

#include <U8glib.h>

#if ENABLED(SHOW_BOOTSCREEN) && ENABLED(SHOW_CUSTOM_BOOTSCREEN)
  #include "_Bootscreen.h"
#endif

// Only Western languages support big / small fonts
#if DISABLED(DISPLAY_CHARSET_ISO10646_1)
  #undef USE_BIG_EDIT_FONT
  #undef USE_SMALL_INFOFONT
#endif

#if ENABLED(USE_SMALL_INFOFONT)
  #include "dogm_font_data_6x9_marlin.h"
  #define FONT_STATUSMENU_NAME u8g_font_6x9
#else
  #define FONT_STATUSMENU_NAME FONT_MENU_NAME
#endif

#include "dogm_font_data_Marlin_symbols.h"   // The Marlin special symbols
#define FONT_SPECIAL_NAME Marlin_symbols

#if DISABLED(SIMULATE_ROMFONT)
  #if ENABLED(DISPLAY_CHARSET_ISO10646_1)
    #include "dogm_font_data_ISO10646_1.h"
    #define FONT_MENU_NAME ISO10646_1_5x7
  #elif ENABLED(DISPLAY_CHARSET_ISO10646_5)
    #include "dogm_font_data_ISO10646_5_Cyrillic.h"
    #define FONT_MENU_NAME ISO10646_5_Cyrillic_5x7
  #elif ENABLED(DISPLAY_CHARSET_ISO10646_KANA)
    #include "dogm_font_data_ISO10646_Kana.h"
    #define FONT_MENU_NAME ISO10646_Kana_5x7
  #elif ENABLED(DISPLAY_CHARSET_ISO10646_GREEK)
    #include "dogm_font_data_ISO10646_Greek.h"
    #define FONT_MENU_NAME ISO10646_Greek_5x7
  #elif ENABLED(DISPLAY_CHARSET_ISO10646_CN)
    #include "dogm_font_data_ISO10646_CN.h"
    #define FONT_MENU_NAME ISO10646_CN
    #define TALL_FONT_CORRECTION 1
  #elif ENABLED(DISPLAY_CHARSET_ISO10646_TR)
    #include "dogm_font_data_ISO10646_1_tr.h"
    #define FONT_MENU_NAME ISO10646_TR
  #else // fall-back
    #include "dogm_font_data_ISO10646_1.h"
    #define FONT_MENU_NAME ISO10646_1_5x7
  #endif
#else // SIMULATE_ROMFONT
  #if DISPLAY_CHARSET_HD44780 == JAPANESE
    #include "dogm_font_data_HD44780_J.h"
    #define FONT_MENU_NAME HD44780_J_5x7
  #elif DISPLAY_CHARSET_HD44780 == WESTERN
    #include "dogm_font_data_HD44780_W.h"
    #define FONT_MENU_NAME HD44780_W_5x7
  #elif DISPLAY_CHARSET_HD44780 == CYRILLIC
    #include "dogm_font_data_HD44780_C.h"
    #define FONT_MENU_NAME HD44780_C_5x7
  #else // fall-back
    #include "dogm_font_data_ISO10646_1.h"
    #define FONT_MENU_NAME ISO10646_1_5x7
  #endif
#endif // SIMULATE_ROMFONT

//#define FONT_STATUSMENU_NAME FONT_MENU_NAME

#define FONT_STATUSMENU 1
#define FONT_SPECIAL 2
#define FONT_MENU_EDIT 3
#define FONT_MENU 4

// DOGM parameters (size in pixels)
#define DOG_CHAR_WIDTH         6
#define DOG_CHAR_HEIGHT        12
#if ENABLED(USE_BIG_EDIT_FONT)
  #define FONT_MENU_EDIT_NAME u8g_font_9x18
  #define DOG_CHAR_WIDTH_EDIT  9
  #define DOG_CHAR_HEIGHT_EDIT 13
  #define LCD_WIDTH_EDIT       14
#else
  #define FONT_MENU_EDIT_NAME FONT_MENU_NAME
  #define DOG_CHAR_WIDTH_EDIT  6
  #define DOG_CHAR_HEIGHT_EDIT 12
  #define LCD_WIDTH_EDIT       22
#endif

#ifndef TALL_FONT_CORRECTION
  #define TALL_FONT_CORRECTION 0
#endif

#define START_COL              0

// LCD selection
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
  U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_RS); // 2 stripes
  // U8GLIB_ST7920_128X64 u8g(LCD_PINS_RS); // 8 stripes
#elif ENABLED(U8GLIB_ST7920)
  //U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS); // Original u8glib device. 2 stripes
                                                                            // No 4 stripe device available from u8glib.
  //U8GLIB_ST7920_128X64_1X u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS);    // Original u8glib device. 8 stripes
  U8GLIB_ST7920_128X64_RRD u8g(0); // Number of stripes can be adjusted in ultralcd_st7920_u8glib_rrd.h with PAGE_HEIGHT
#elif ENABLED(CARTESIO_UI)
  // The CartesioUI display
  #if DOGLCD_MOSI != -1 && DOGLCD_SCK != -1
    // using SW-SPI
    //U8GLIB_DOGM128 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0);  // 8 stripes
    U8GLIB_DOGM128_2X u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 4 stripes
  #else
    //U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);  // 8 stripes
    U8GLIB_DOGM128_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
  #endif
#elif ENABLED(U8GLIB_LM6059_AF)
  // Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
  //U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0);  // 8 stripes
  U8GLIB_LM6059_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
#elif ENABLED(MAKRPANEL) || ENABLED(VIKI2) || ENABLED(miniVIKI)
  // The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller as well
  //U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);  // 8 stripes
  U8GLIB_NHD_C12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
#elif ENABLED(U8GLIB_SSD1306)
  // Generic support for SSD1306 OLED I2C LCDs
  //U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST);  // 8 stripes
  U8GLIB_SSD1306_128X64_2X u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes
#elif ENABLED(U8GLIB_SH1106)
  // Generic support for SH1106 OLED I2C LCDs
  //U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST);  // 8 stripes
  U8GLIB_SH1106_128X64_2X u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes
#elif ENABLED(MINIPANEL)
  // The MINIPanel display
  //U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0);  // 8 stripes
  U8GLIB_MINI12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes
#else
  // for regular DOGM128 display with HW-SPI
  //U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);  // HW-SPI Com: CS, A0  // 8 stripes
  U8GLIB_DOGM128_2X u8g(DOGLCD_CS, DOGLCD_A0);  // HW-SPI Com: CS, A0 // 4 stripes
#endif

#ifndef LCD_PIXEL_WIDTH
  #define LCD_PIXEL_WIDTH 128
#endif
#ifndef LCD_PIXEL_HEIGHT
  #define LCD_PIXEL_HEIGHT 64
#endif

#include "utf_mapper.h"

int lcd_contrast;
static char currentfont = 0;

// The current graphical page being rendered
u8g_page_t &page = ((u8g_pb_t *)((u8g.getU8g())->dev->dev_mem))->p;

// For selective rendering within a Y range
#define PAGE_UNDER(yb) (u8g.getU8g()->current_page.y0 <= (yb))
#define PAGE_CONTAINS(ya, yb) (PAGE_UNDER(yb) && u8g.getU8g()->current_page.y1 >= (ya))

static void lcd_setFont(const char font_nr) {
  switch (font_nr) {
    case FONT_STATUSMENU : {u8g.setFont(FONT_STATUSMENU_NAME); currentfont = FONT_STATUSMENU;}; break;
    case FONT_MENU       : {u8g.setFont(FONT_MENU_NAME); currentfont = FONT_MENU;}; break;
    case FONT_SPECIAL    : {u8g.setFont(FONT_SPECIAL_NAME); currentfont = FONT_SPECIAL;}; break;
    case FONT_MENU_EDIT  : {u8g.setFont(FONT_MENU_EDIT_NAME); currentfont = FONT_MENU_EDIT;}; break;
    break;
  }
}

void lcd_print(const char c) {
  if ((c > 0) && (c <= LCD_STR_SPECIAL_MAX)) {
    u8g.setFont(FONT_SPECIAL_NAME);
    u8g.print(c);
    lcd_setFont(currentfont);
  }
  else charset_mapper(c);
}

char lcd_print_and_count(const char c) {
  if ((c > 0) && (c <= LCD_STR_SPECIAL_MAX)) {
    u8g.setFont(FONT_SPECIAL_NAME);
    u8g.print(c);
    lcd_setFont(currentfont);
    return 1;
  }
  else return charset_mapper(c);
}

void lcd_print(const char* const str) {
  for (uint8_t i = 0; char c = str[i]; ++i) lcd_print(c);
}

/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
void lcd_printPGM(const char* str) {
  for (; char c = pgm_read_byte(str); ++str) lcd_print(c);
}

// Initialize or re-initializw the LCD
static void lcd_implementation_init() {

  #if PIN_EXISTS(LCD_BACKLIGHT) // Enable LCD backlight
    OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH);
  #endif

  #if PIN_EXISTS(LCD_RESET)
    OUT_WRITE(LCD_RESET_PIN, HIGH);
  #endif

  #if DISABLED(MINIPANEL) // setContrast not working for Mini Panel
    u8g.setContrast(lcd_contrast);
  #endif

  #if ENABLED(LCD_SCREEN_ROT_90)
    u8g.setRot90();   // Rotate screen by 90°
  #elif ENABLED(LCD_SCREEN_ROT_180)
    u8g.setRot180();  // Rotate screen by 180°
  #elif ENABLED(LCD_SCREEN_ROT_270)
    u8g.setRot270();  // Rotate screen by 270°
  #endif

  #if ENABLED(SHOW_BOOTSCREEN)
    static bool show_bootscreen = true;

    #if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
      if (show_bootscreen) {
        u8g.firstPage();
        do {
          u8g.drawBitmapP(
            (128 - (CUSTOM_BOOTSCREEN_BMPWIDTH))  /2,
            ( 64 - (CUSTOM_BOOTSCREEN_BMPHEIGHT)) /2,
            CEILING(CUSTOM_BOOTSCREEN_BMPWIDTH, 8), CUSTOM_BOOTSCREEN_BMPHEIGHT, custom_start_bmp);
        } while (u8g.nextPage());
        safe_delay(CUSTOM_BOOTSCREEN_TIMEOUT);
      }
    #endif // SHOW_CUSTOM_BOOTSCREEN

    const uint8_t offx = (u8g.getWidth() - (START_BMPWIDTH)) / 2;

    #if ENABLED(START_BMPHIGH)
      constexpr uint8_t offy = 0;
    #else
      constexpr uint8_t offy = DOG_CHAR_HEIGHT;
    #endif

    const uint8_t txt1X = (u8g.getWidth() - (sizeof(STRING_SPLASH_LINE1) - 1) * (DOG_CHAR_WIDTH)) / 2;

    if (show_bootscreen) {
      u8g.firstPage();
      do {
        u8g.drawBitmapP(offx, offy, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
        lcd_setFont(FONT_MENU);
        #ifndef STRING_SPLASH_LINE2
          u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT), STRING_SPLASH_LINE1);
        #else
          const uint8_t txt2X = (u8g.getWidth() - (sizeof(STRING_SPLASH_LINE2) - 1) * (DOG_CHAR_WIDTH)) / 2;
          u8g.drawStr(txt1X, u8g.getHeight() - (DOG_CHAR_HEIGHT) * 3 / 2, STRING_SPLASH_LINE1);
          u8g.drawStr(txt2X, u8g.getHeight() - (DOG_CHAR_HEIGHT) * 1 / 2, STRING_SPLASH_LINE2);
        #endif
      } while (u8g.nextPage());
    }

    show_bootscreen = false;

  #endif // SHOW_BOOTSCREEN
}

// The kill screen is displayed for unrecoverable conditions
void lcd_kill_screen() {
  lcd_setFont(FONT_MENU);
  u8g.setPrintPos(0, u8g.getHeight()/4*1);
  lcd_print(lcd_status_message);
  u8g.setPrintPos(0, u8g.getHeight()/4*2);
  lcd_printPGM(PSTR(MSG_HALTED));
  u8g.setPrintPos(0, u8g.getHeight()/4*3);
  lcd_printPGM(PSTR(MSG_PLEASE_RESET));
}

static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop

//
// Status Screen
//

FORCE_INLINE void _draw_centered_temp(const int temp, const uint8_t x, const uint8_t y) {
  const uint8_t degsize = 6 * (temp >= 100 ? 3 : temp >= 10 ? 2 : 1); // number's pixel width
  u8g.setPrintPos(x - (18 - degsize) / 2, y); // move left if shorter
  lcd_print(itostr3(temp));
  lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
}

FORCE_INLINE void _draw_heater_status(const uint8_t x, const int8_t heater) {
  #if HAS_TEMP_BED
    bool isBed = heater < 0;
  #else
    const bool isBed = false;
  #endif

  if (PAGE_UNDER(7))
    _draw_centered_temp((isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater)) + 0.5, x, 7);

  if (PAGE_CONTAINS(21, 28))
    _draw_centered_temp((isBed ? thermalManager.degBed() : thermalManager.degHotend(heater)) + 0.5, x, 28);

  if (PAGE_CONTAINS(17, 20)) {
    const uint8_t h = isBed ? 7 : 8,
                  y = isBed ? 18 : 17;
    if (isBed ? thermalManager.isHeatingBed() : thermalManager.isHeatingHotend(heater)) {
      u8g.setColorIndex(0); // white on black
      u8g.drawBox(x + h, y, 2, 2);
      u8g.setColorIndex(1); // black on white
    }
    else {
      u8g.drawBox(x + h, y, 2, 2);
    }
  }
}

FORCE_INLINE void _draw_axis_label(const AxisEnum axis, const char* const pstr, const bool blink) {
  if (blink)
    lcd_printPGM(pstr);
  else {
    if (!axis_homed[axis])
      u8g.print('?');
    else {
      #if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
        if (!axis_known_position[axis])
          u8g.print(' ');
        else
      #endif
      lcd_printPGM(pstr);
    }
  }
}

//#define DOGM_SD_PERCENT

static void lcd_implementation_status_screen() {

  bool blink = lcd_blink();

  // Black color, white background
  u8g.setColorIndex(1);

  // Status Menu Font
  lcd_setFont(FONT_STATUSMENU);

  //
  // Fan Animation
  //

  if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) {

    u8g.drawBitmapP(9, 1, STATUS_SCREENBYTEWIDTH, STATUS_SCREENHEIGHT,
      #if HAS_FAN0
        blink && fanSpeeds[0] ? status_screen0_bmp : status_screen1_bmp
      #else
        status_screen0_bmp
      #endif
    );

  }

  //
  // Temperature Graphics and Info
  //

  if (PAGE_UNDER(28)) {
    // Extruders
    HOTEND_LOOP() _draw_heater_status(5 + e * 25, e);

    // Heated bed
    #if HOTENDS < 4 && HAS_TEMP_BED
      _draw_heater_status(81, -1);
    #endif

    if (PAGE_CONTAINS(20, 27)) {
      // Fan
      u8g.setPrintPos(104, 27);
      #if HAS_FAN0
        int per = ((fanSpeeds[0] + 1) * 100) / 256;
        if (per) {
          lcd_print(itostr3(per));
          u8g.print('%');
        }
      #endif
    }
  }

  #if ENABLED(SDSUPPORT)

    //
    // SD Card Symbol
    //

    if (PAGE_CONTAINS(42 - (TALL_FONT_CORRECTION), 51 - (TALL_FONT_CORRECTION))) {
      // Upper box
      u8g.drawBox(42, 42 - (TALL_FONT_CORRECTION), 8, 7);     // 42-48 (or 41-47)
      // Right edge
      u8g.drawBox(50, 44 - (TALL_FONT_CORRECTION), 2, 5);     // 44-48 (or 43-47)
      // Bottom hollow box
      u8g.drawFrame(42, 49 - (TALL_FONT_CORRECTION), 10, 4);  // 49-52 (or 48-51)
      // Corner pixel
      u8g.drawPixel(50, 43 - (TALL_FONT_CORRECTION));         // 43 (or 42)
    }

    //
    // Progress bar frame
    //

    #define PROGRESS_BAR_X 54
    #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)

    if (PAGE_CONTAINS(49, 52 - (TALL_FONT_CORRECTION)))       // 49-52 (or 49-51)
      u8g.drawFrame(
        PROGRESS_BAR_X, 49,
        PROGRESS_BAR_WIDTH, 4 - (TALL_FONT_CORRECTION)
      );

    if (IS_SD_PRINTING) {

      //
      // Progress bar solid part
      //

      if (PAGE_CONTAINS(50, 51 - (TALL_FONT_CORRECTION)))     // 50-51 (or just 50)
        u8g.drawBox(
          PROGRESS_BAR_X + 1, 50,
          (unsigned int)((PROGRESS_BAR_WIDTH - 2) * card.percentDone() * 0.01), 2 - (TALL_FONT_CORRECTION)
        );

      //
      // SD Percent Complete
      //

      #if ENABLED(DOGM_SD_PERCENT)
        if (PAGE_CONTAINS(41, 48)) {
          // Percent complete
          u8g.setPrintPos(55, 48);
          u8g.print(itostr3(card.percentDone()));
          u8g.print('%');
        }
      #endif
    }

    //
    // Elapsed Time
    //

    #if DISABLED(DOGM_SD_PERCENT)
      #define SD_DURATION_X (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH / 2) - len * (DOG_CHAR_WIDTH / 2))
    #else
      #define SD_DURATION_X (LCD_PIXEL_WIDTH - len * DOG_CHAR_WIDTH)
    #endif

    if (PAGE_CONTAINS(41, 48)) {

      char buffer[10];
      duration_t elapsed = print_job_timer.duration();
      bool has_days = (elapsed.value > 60*60*24L);
      uint8_t len = elapsed.toDigital(buffer, has_days);
      u8g.setPrintPos(SD_DURATION_X, 48);
      lcd_print(buffer);
    }

  #endif

  //
  // XYZ Coordinates
  //

  #if ENABLED(USE_SMALL_INFOFONT)
    #define INFO_FONT_HEIGHT 7
  #else
    #define INFO_FONT_HEIGHT 8
  #endif

  #define XYZ_BASELINE (30 + INFO_FONT_HEIGHT)

  #define X_LABEL_POS  3
  #define X_VALUE_POS 11
  #define XYZ_SPACING 40

  // Enable to save many cycles by drawing a hollow frame
  #define XYZ_HOLLOW_FRAME
  #define MENU_HOLLOW_FRAME

  #if ENABLED(XYZ_HOLLOW_FRAME)
    #define XYZ_FRAME_TOP 29
    #define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 3
  #else
    #define XYZ_FRAME_TOP 30
    #define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 1
  #endif

  // Before homing the axis letters are blinking 'X' <-> '?'.
  // When axis is homed but axis_known_position is false the axis letters are blinking 'X' <-> ' '.
  // When everything is ok you see a constant 'X'.

  static char xstring[5], ystring[5], zstring[7];

  // At the first page, regenerate the XYZ strings
  if (page.page == 0) {
    strcpy(xstring, ftostr4sign(current_position[X_AXIS]));
    strcpy(ystring, ftostr4sign(current_position[Y_AXIS]));
    strcpy(zstring, ftostr52sp(current_position[Z_AXIS] + 0.00001));
  }

  if (PAGE_CONTAINS(XYZ_FRAME_TOP, XYZ_FRAME_TOP + XYZ_FRAME_HEIGHT - 1)) {

    #if ENABLED(XYZ_HOLLOW_FRAME)
      u8g.drawFrame(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 29-40  7: 29-39
    #else
      u8g.drawBox(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT);   // 8: 30-39  7: 30-37
    #endif

    if (PAGE_CONTAINS(XYZ_BASELINE - (INFO_FONT_HEIGHT - 1), XYZ_BASELINE)) {

      #if DISABLED(XYZ_HOLLOW_FRAME)
        u8g.setColorIndex(0); // white on black
      #endif

      u8g.setPrintPos(0 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE);
      _draw_axis_label(X_AXIS, PSTR(MSG_X), blink);
      u8g.setPrintPos(0 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE);
      lcd_print(xstring);

      u8g.setPrintPos(1 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE);
      _draw_axis_label(Y_AXIS, PSTR(MSG_Y), blink);
      u8g.setPrintPos(1 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE);
      lcd_print(ystring);

      u8g.setPrintPos(2 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE);
      _draw_axis_label(Z_AXIS, PSTR(MSG_Z), blink);
      u8g.setPrintPos(2 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE);
      lcd_print(zstring);

      #if DISABLED(XYZ_HOLLOW_FRAME)
        u8g.setColorIndex(1); // black on white
      #endif
    }
  }

  //
  // Feedrate
  //

  if (PAGE_CONTAINS(51 - INFO_FONT_HEIGHT, 49)) {
    lcd_setFont(FONT_MENU);
    u8g.setPrintPos(3, 50);
    lcd_print(LCD_STR_FEEDRATE[0]);

    lcd_setFont(FONT_STATUSMENU);
    u8g.setPrintPos(12, 50);
    lcd_print(itostr3(feedrate_percentage));
    u8g.print('%');
  }

  //
  // Status line
  //

  #define STATUS_BASELINE (55 + INFO_FONT_HEIGHT)

  if (PAGE_CONTAINS(STATUS_BASELINE + 1 - INFO_FONT_HEIGHT, STATUS_BASELINE)) {
    u8g.setPrintPos(0, STATUS_BASELINE);

    #if DISABLED(FILAMENT_LCD_DISPLAY)
      lcd_print(lcd_status_message);
    #else
      if (PENDING(millis(), previous_lcd_status_ms + 5000UL)) {  //Display both Status message line and Filament display on the last line
        lcd_print(lcd_status_message);
      }
      else {
        lcd_printPGM(PSTR("dia:"));
        lcd_print(ftostr12ns(filament_width_meas));
        lcd_printPGM(PSTR(" factor:"));
        lcd_print(itostr3(100.0 * volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]));
        u8g.print('%');
      }
    #endif
  }
}

#if ENABLED(ULTIPANEL)

  uint8_t row_y1, row_y2;

  // Set the colors for a menu item based on whether it is selected
  static void lcd_implementation_mark_as_selected(const uint8_t row, const bool isSelected) {

    row_y1 = row * (DOG_CHAR_HEIGHT + 2 * (TALL_FONT_CORRECTION)) + 1;
    row_y2 = row_y1 + (DOG_CHAR_HEIGHT + 2 * (TALL_FONT_CORRECTION)) - 1;

    if (!PAGE_CONTAINS(row_y1 + 1, row_y1 + 1 + DOG_CHAR_HEIGHT + 2 * (TALL_FONT_CORRECTION))) return;

    if (isSelected) {
      #if ENABLED(MENU_HOLLOW_FRAME)
        u8g.drawHLine(0, row_y1 + 1, LCD_PIXEL_WIDTH);
        u8g.drawHLine(0, row_y1 + 1 + DOG_CHAR_HEIGHT + 2 * (TALL_FONT_CORRECTION), LCD_PIXEL_WIDTH);
      #else
        u8g.setColorIndex(1); // black on white
        u8g.drawBox(0, row_y1 + 2, LCD_PIXEL_WIDTH, DOG_CHAR_HEIGHT - 1 + 2 * (TALL_FONT_CORRECTION));
        u8g.setColorIndex(0); // white on black
      #endif
    }
    #if DISABLED(MENU_HOLLOW_FRAME)
      else {
        u8g.setColorIndex(1); // unmarked text is black on white
      }
    #endif
    u8g.setPrintPos((START_COL) * (DOG_CHAR_WIDTH), row_y2);
  }

  // Draw a static line of text in the same idiom as a menu item
  static void lcd_implementation_drawmenu_static(const uint8_t row, const char* pstr, const bool center=true, const bool invert=false, const char* valstr=NULL) {

    lcd_implementation_mark_as_selected(row, invert);

    if (!PAGE_CONTAINS(row_y1, row_y2)) return;

    char c;
    int8_t n = LCD_WIDTH - (START_COL);

    if (center && !valstr) {
      int8_t pad = (LCD_WIDTH - lcd_strlen_P(pstr)) / 2;
      while (--pad >= 0) { u8g.print(' '); n--; }
    }
    while (n > 0 && (c = pgm_read_byte(pstr))) {
      n -= lcd_print_and_count(c);
      pstr++;
    }
    if (valstr) while (n > 0 && (c = *valstr)) {
      n -= lcd_print_and_count(c);
      valstr++;
    }
    while (n-- > 0) u8g.print(' ');
  }

  // Draw a generic menu item
  static void lcd_implementation_drawmenu_generic(const bool isSelected, const uint8_t row, const char* pstr, const char pre_char, const char post_char) {
    UNUSED(pre_char);

    lcd_implementation_mark_as_selected(row, isSelected);

    if (!PAGE_CONTAINS(row_y1, row_y2)) return;

    uint8_t n = LCD_WIDTH - (START_COL) - 2;
    while (char c = pgm_read_byte(pstr)) {
      n -= lcd_print_and_count(c);
      pstr++;
    }
    while (n--) u8g.print(' ');
    u8g.setPrintPos(LCD_PIXEL_WIDTH - (DOG_CHAR_WIDTH), row_y2);
    lcd_print(post_char);
    u8g.print(' ');
  }

  // Macros for specific types of menu items
  #define lcd_implementation_drawmenu_back(sel, row, pstr, dummy) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
  #define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
  #define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
  #define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')

  // Draw a menu item with an editable value
  static void _drawmenu_setting_edit_generic(const bool isSelected, const uint8_t row, const char* pstr, const char* const data, const bool pgm) {

    lcd_implementation_mark_as_selected(row, isSelected);

    if (!PAGE_CONTAINS(row_y1, row_y2)) return;

    const uint8_t vallen = (pgm ? lcd_strlen_P(data) : (lcd_strlen((char*)data)));
    uint8_t n = LCD_WIDTH - (START_COL) - 2 - vallen;

    while (char c = pgm_read_byte(pstr)) {
      n -= lcd_print_and_count(c);
      pstr++;
    }
    u8g.print(':');
    while (n--) u8g.print(' ');
    u8g.setPrintPos(LCD_PIXEL_WIDTH - (DOG_CHAR_WIDTH) * vallen, row_y2);
    if (pgm)  lcd_printPGM(data);  else  lcd_print((char*)data);
  }

  // Macros for edit items
  #define lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, false)
  #define lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, true)

  #define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43sign(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52sign(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51sign(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_float62(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr62rj(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))

  #define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43sign(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52sign(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51sign(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_callback_float62(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr62rj(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5rj(*(data)))
  #define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))

  void lcd_implementation_drawedit(const char* const pstr, const char* const value=NULL) {
    const uint8_t labellen = lcd_strlen_P(pstr),
                  vallen = lcd_strlen(value);

    uint8_t rows = (labellen > LCD_WIDTH - 2 - vallen) ? 2 : 1;

    #if ENABLED(USE_BIG_EDIT_FONT)
      uint8_t lcd_width, char_width;
      if (labellen <= LCD_WIDTH_EDIT - 1) {
        if (labellen >= LCD_WIDTH_EDIT - vallen) rows = 2;
        lcd_width = LCD_WIDTH_EDIT + 1;
        char_width = DOG_CHAR_WIDTH_EDIT;
        lcd_setFont(FONT_MENU_EDIT);
      }
      else {
        lcd_width = LCD_WIDTH - (START_COL);
        char_width = DOG_CHAR_WIDTH;
        lcd_setFont(FONT_MENU);
      }
    #else
      constexpr uint8_t lcd_width = LCD_WIDTH - (START_COL),
                        char_width = DOG_CHAR_WIDTH;
    #endif

    // Center either one or two rows
    const uint8_t segmentHeight = u8g.getHeight() / (rows + 1); // 1 / (rows+1) = 1/2 or 1/3
    uint8_t baseline = segmentHeight + (DOG_CHAR_HEIGHT_EDIT + 1) / 2;

    if (PAGE_CONTAINS(baseline + 1 - (DOG_CHAR_HEIGHT_EDIT), baseline)) {
      u8g.setPrintPos(0, baseline);
      lcd_printPGM(pstr);
    }

    if (value != NULL) {
      baseline += (rows - 1) * segmentHeight;
      if (PAGE_CONTAINS(baseline + 1 - (DOG_CHAR_HEIGHT_EDIT), baseline)) {
        u8g.print(':');
        u8g.setPrintPos((lcd_width - 1 - vallen) * char_width, baseline);
        lcd_print(value);
      }
    }
  }

  #if ENABLED(SDSUPPORT)

    static void _drawmenu_sd(const bool isSelected, const uint8_t row, const char* const pstr, const char* filename, char* const longFilename, const bool isDir) {
      UNUSED(pstr);

      lcd_implementation_mark_as_selected(row, isSelected);

      if (!PAGE_CONTAINS(row_y1, row_y2)) return;

      uint8_t n = LCD_WIDTH - (START_COL) - 1;
      if (longFilename[0]) {
        filename = longFilename;
        longFilename[n] = '\0';
      }

      if (isDir) lcd_print(LCD_STR_FOLDER[0]);

      while (char c = *filename) {
        n -= lcd_print_and_count(c);
        filename++;
      }
      while (n--) u8g.print(' ');
    }

    #define lcd_implementation_drawmenu_sdfile(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, false)
    #define lcd_implementation_drawmenu_sddirectory(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, true)

  #endif // SDSUPPORT

#endif // ULTIPANEL

#endif //__ULTRALCD_IMPL_DOGM_H