You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
267 lines
14 KiB
Arduino
267 lines
14 KiB
Arduino
12 years ago
|
/*
|
||
|
|
|
||
|
|
Console.pde
|
||
|
|
|
||
|
|
Read from serial monitor, output to display
|
||
|
|
|
||
|
|
>>> Before compiling: Please remove comment from the constructor of the
|
||
|
|
>>> connected graphics display (see below).
|
||
|
|
|
||
|
|
Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
|
||
|
|
|
||
|
|
Copyright (c) 2011, olikraus@gmail.com
|
||
|
|
All rights reserved.
|
||
|
|
|
||
|
|
Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
are permitted provided that the following conditions are met:
|
||
|
|
|
||
|
|
* Redistributions of source code must retain the above copyright notice, this list
|
||
|
|
of conditions and the following disclaimer.
|
||
|
|
|
||
|
|
* Redistributions in binary form must reproduce the above copyright notice, this
|
||
|
|
list of conditions and the following disclaimer in the documentation and/or other
|
||
|
|
materials provided with the distribution.
|
||
|
|
|
||
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||
|
|
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||
|
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||
|
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
||
|
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||
|
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||
|
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
#include "U8glib.h"
|
||
|
|
|
||
|
|
// setup u8g object, please remove comment from one of the following constructor calls
|
||
|
10 years ago
|
// IMPORTANT NOTE: The following list is incomplete. The complete list of supported
|
||
|
|
// devices with all constructor calls is here: http://code.google.com/p/u8glib/wiki/device
|
||
|
12 years ago
|
//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
10 years ago
|
//U8GLIB_DOGS102 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
12 years ago
|
//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
10 years ago
|
//U8GLIB_DOGM128_2X u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
12 years ago
|
//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
|
||
|
|
//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
|
||
|
|
//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
|
||
|
|
//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
|
||
|
|
//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
|
||
|
|
//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
|
||
|
|
//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
|
||
|
|
//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
|
||
|
|
//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10
|
||
|
|
//U8GLIB_ST7920_192X32_4X u8g(10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI
|
||
|
|
//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
|
||
|
|
//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16
|
||
|
|
//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
|
||
|
|
//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17
|
||
|
|
//U8GLIB_LM6059 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_LM6063 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_DOGXL160_BW u8g(10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
|
||
|
|
//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8
|
||
|
|
//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16
|
||
|
|
//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
|
||
|
|
//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
|
||
|
|
//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16
|
||
|
|
//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16
|
||
|
|
//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16
|
||
|
|
//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
10 years ago
|
//U8GLIB_SSD1306_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new white HalTec OLED)
|
||
|
12 years ago
|
//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
|
||
|
10 years ago
|
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI
|
||
|
|
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_NO_ACK|U8G_I2C_OPT_FAST); // Fast I2C / TWI
|
||
|
|
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
|
||
|
|
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_SSD1306_ADAFRUIT_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
|
||
|
12 years ago
|
//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
|
||
|
10 years ago
|
//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
|
||
|
|
//U8GLIB_SH1106_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_SH1106_128X64 u8g(4, 5, 6, 7); // SW SPI Com: SCK = 4, MOSI = 5, CS = 6, A0 = 7 (new blue HalTec OLED)
|
||
|
|
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE); // I2C / TWI
|
||
|
|
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_DEV_0|U8G_I2C_OPT_FAST); // Dev 0, Fast I2C / TWI
|
||
|
|
//U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send ACK
|
||
|
12 years ago
|
//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C
|
||
|
|
//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C
|
||
|
10 years ago
|
//U8GLIB_UC1611_DOGM240 u8g(U8G_I2C_OPT_NONE); // I2C
|
||
|
|
//U8GLIB_UC1611_DOGM240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_UC1611_DOGM240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
|
||
|
|
//U8GLIB_UC1611_DOGXL240 u8g(U8G_I2C_OPT_NONE); // I2C
|
||
|
|
//U8GLIB_UC1611_DOGXL240 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9
|
||
|
|
//U8GLIB_UC1611_DOGXL240 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11)
|
||
|
12 years ago
|
//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
|
//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
10 years ago
|
//U8GLIB_LD7032_60x32 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
|
//U8GLIB_LD7032_60x32 u8g(11, 12, 9, 10, 8); // SPI Com: SCK = 11, MOSI = 12, CS = 9, A0 = 10, RST = 8 (SW SPI Nano Board)
|
||
|
|
//U8GLIB_UC1608_240X64 u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
|
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
|
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
|
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
|
//U8GLIB_UC1608_240X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
|
//U8GLIB_UC1608_240X64_2X u8g(13, 11, 10, 9, 8); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
|
//U8GLIB_UC1608_240X64 u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
|
//U8GLIB_UC1608_240X64_2X u8g(10, 9, 8); // HW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8
|
||
|
12 years ago
|
//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
|
||
|
10 years ago
|
//U8GLIB_T6963_128X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
|
||
|
12 years ago
|
//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
|
||
|
|
//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16
|
||
|
10 years ago
|
//U8GLIB_HT1632_24X16 u8g(3, 2, 4); // WR = 3, DATA = 2, CS = 4
|
||
|
|
//U8GLIB_SSD1351_128X128_332 u8g(13, 11, 8, 9, 7); // Arduino UNO: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
|
||
|
|
//U8GLIB_SSD1351_128X128_332 u8g(76, 75, 8, 9, 7); // Arduino DUE: SW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
|
||
|
|
//U8GLIB_SSD1351_128X128_332 u8g(8, 9, 7); // Arduino: HW SPI Com: SCK = 13, MOSI = 11, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
|
||
|
|
//U8GLIB_SSD1351_128X128_HICOLOR u8g(76, 75, 8, 9, 7); // Arduino DUE, SW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
|
||
|
|
//U8GLIB_SSD1351_128X128_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (http://electronics.ilsoft.co.uk/ArduinoShield.aspx)
|
||
|
|
//U8GLIB_SSD1351_128X128GH_332 u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
|
||
|
|
//U8GLIB_SSD1351_128X128GH_HICOLOR u8g(8, 9, 7); // Arduino, HW SPI Com: SCK = 76, MOSI = 75, CS = 8, A0 = 9, RESET = 7 (Freetronics OLED)
|
||
|
12 years ago
|
|
||
|
|
|
||
|
|
// setup input buffer
|
||
|
|
#define LINE_MAX 30
|
||
|
|
uint8_t line_buf[LINE_MAX] = "U8GLIB Console";
|
||
|
|
uint8_t line_pos = 0;
|
||
|
|
|
||
|
|
// setup a text screen to support scrolling
|
||
|
|
#define ROW_MAX 12
|
||
|
|
|
||
|
|
|
||
|
|
uint8_t screen[ROW_MAX][LINE_MAX];
|
||
|
|
uint8_t rows, cols;
|
||
|
|
|
||
|
|
// line height, which matches the selected font (5x7)
|
||
|
|
#define LINE_PIXEL_HEIGHT 7
|
||
|
|
|
||
|
|
// clear entire screen, called during setup
|
||
|
|
void clear_screen(void) {
|
||
|
|
uint8_t i, j;
|
||
|
|
for( i = 0; i < ROW_MAX; i++ )
|
||
|
|
for( j = 0; j < LINE_MAX; j++ )
|
||
|
|
screen[i][j] = 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
// append a line to the screen, scroll up
|
||
|
|
void add_line_to_screen(void) {
|
||
|
|
uint8_t i, j;
|
||
|
|
for( j = 0; j < LINE_MAX; j++ )
|
||
|
|
for( i = 0; i < rows-1; i++ )
|
||
|
|
screen[i][j] = screen[i+1][j];
|
||
|
|
|
||
|
|
for( j = 0; j < LINE_MAX; j++ )
|
||
|
|
screen[rows-1][j] = line_buf[j];
|
||
|
|
}
|
||
|
|
|
||
|
|
// U8GLIB draw procedure: output the screen
|
||
|
|
void draw(void) {
|
||
|
|
uint8_t i, y;
|
||
|
|
// graphic commands to redraw the complete screen are placed here
|
||
|
|
y = 0; // reference is the top left -1 position of the string
|
||
|
|
y--; // correct the -1 position of the drawStr
|
||
|
|
for( i = 0; i < rows; i++ )
|
||
|
|
{
|
||
|
|
u8g.drawStr( 0, y, (char *)(screen[i]));
|
||
|
|
y += u8g.getFontLineSpacing();
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
void exec_line(void) {
|
||
|
|
// echo line to the serial monitor
|
||
|
|
Serial.println((const char *)line_buf);
|
||
|
|
|
||
|
|
// add the line to the screen
|
||
|
|
add_line_to_screen();
|
||
|
|
|
||
|
|
// U8GLIB picture loop
|
||
|
|
u8g.firstPage();
|
||
|
|
do {
|
||
|
|
draw();
|
||
|
|
} while( u8g.nextPage() );
|
||
|
|
}
|
||
|
|
|
||
|
|
// clear current input buffer
|
||
|
|
void reset_line(void) {
|
||
|
|
line_pos = 0;
|
||
|
|
line_buf[line_pos] = '\0';
|
||
|
|
}
|
||
|
|
|
||
|
|
// add a single character to the input buffer
|
||
|
|
void char_to_line(uint8_t c) {
|
||
|
|
line_buf[line_pos] = c;
|
||
|
|
line_pos++;
|
||
|
|
line_buf[line_pos] = '\0';
|
||
|
|
}
|
||
|
|
|
||
|
|
// check serial in and handle the character
|
||
|
|
void read_line(void) {
|
||
|
|
if ( Serial.available() )
|
||
|
|
{
|
||
|
|
uint8_t c;
|
||
|
|
c = Serial.read();
|
||
|
|
if ( line_pos >= cols-1 ) {
|
||
|
|
exec_line();
|
||
|
|
reset_line();
|
||
|
|
char_to_line(c);
|
||
|
|
}
|
||
|
|
else if ( c == '\n' ) {
|
||
|
|
// ignore '\n'
|
||
|
|
}
|
||
|
|
else if ( c == '\r' ) {
|
||
|
|
exec_line();
|
||
|
|
reset_line();
|
||
|
|
}
|
||
|
|
else {
|
||
|
|
char_to_line(c);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
// Arduino master setup
|
||
|
|
void setup(void) {
|
||
|
|
// set font for the console window
|
||
|
|
u8g.setFont(u8g_font_5x7);
|
||
|
|
//u8g.setFont(u8g_font_9x15);
|
||
|
|
|
||
|
|
// set upper left position for the string draw procedure
|
||
|
|
u8g.setFontPosTop();
|
||
|
|
|
||
|
|
// calculate the number of rows for the display
|
||
|
|
rows = u8g.getHeight() / u8g.getFontLineSpacing();
|
||
|
|
if ( rows > ROW_MAX )
|
||
|
|
rows = ROW_MAX;
|
||
|
|
|
||
|
|
// estimate the number of columns for the display
|
||
|
|
cols = u8g.getWidth() / u8g.getStrWidth("m");
|
||
|
|
if ( cols > LINE_MAX-1 )
|
||
|
|
cols = LINE_MAX-1;
|
||
|
|
|
||
|
|
clear_screen(); // clear screen
|
||
|
|
delay(1000); // do some delay
|
||
|
|
Serial.begin(9600); // init serial
|
||
|
|
exec_line(); // place the input buffer into the screen
|
||
|
|
reset_line(); // clear input buffer
|
||
|
|
}
|
||
|
|
|
||
|
|
// Arduino main loop
|
||
|
|
void loop(void) {
|
||
|
|
read_line();
|
||
|
|
}
|
||
|
|
|