You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
22 lines
1.3 KiB
Markdown
22 lines
1.3 KiB
Markdown
5 years ago
|
Configuration for the Wanhao Duplicator i3 v2.1
|
||
|
|
|
||
|
|
[Made by Bot-In-a-Box Educational Robotics](https://botinabox.ca)
|
||
|
|
[See original configuration repo](https://github.com/BotInABoxER/marlin2-for-wanhao-i3)
|
||
|
|
|
||
|
|
Notes:
|
||
|
|
- YMMV, but the included thermistor table has been tested to work with a 100k bed thermistor with a 10K pull-up resistor
|
||
|
|
- The smaller Marlin logo is used to save memory
|
||
|
|
- You may have a 4.7K pull-up resistor, in which case the included thermistor table will be off
|
||
|
|
- The included thermistor table was generated with `buildroot/share/scripts/createTemperatureLookupMarlin.py --rp=10000`
|
||
|
|
- Includes an optional custom Wanhao logo bootscreen designed to fit the stock LCD
|
||
|
|
- Includes an optional custom Chippy from Bot-In-a-Box bootscreen designed to fit the stock LCD
|
||
|
|
|
||
|
|
Inspirations:
|
||
|
|
- https://www.thingiverse.com/thing:3378807 (Custom firmware 1.x by Nitrogen777)
|
||
|
|
- https://www.thingiverse.com/thing:3378807 (Custom firmware 2.x by Remotheman)
|
||
|
|
|
||
|
|
Instructions:
|
||
|
|
- Copy the `Configuration.h`, `_Bootscreen.h` (or `Chippy_Bootscreen.h`; rename it `_Bootscreen.h`), and `Configuration_adv.h` to the `Marlin/ directory`
|
||
|
|
- Copy the `thermistor_99.h` and `thermistors.h` files to the `Marlin/src/modules/thermistors` directory
|
||
|
|
- Flash the firmware onto your Melzi (https://www.fission3d.com/guides/flash-bootloader-and-install-firmware-with-raspberry-pi might help)
|