//========== Preprocesor ==========

//---- Required ----
#include <ESP8266WiFi.h>
#include <ArduinoOTA.h>
//------------------
#include <ESPAsyncTCP.h>
#include <ESPAsyncWebServer.h>

#include "Tasker.h"
#include "OneWire.h"
#include "DallasTemperature.h"

#include "config.h"

//========== Create objects ==========

AsyncWebServer server(80);
Tasker tasker;
OneWire oneWire(DS18B20_PIN);
DallasTemperature sensor(&oneWire);

//========== Init variables ==========

float temperature;
String metrics;
float reqTemp = 21.5;
float offset = 0.25;

//=================================


void setup() {
//========== Wi-Fi setup ==========

  WiFi.mode(WIFI_STA);
  WiFi.begin(STASSID, STAPSK);
  while (WiFi.waitForConnectResult() != WL_CONNECTED) {
    //Connection Failed! Rebooting...
    delay(5000);
    ESP.restart();
  }
  
//========== OTA setup ==========

  // Port defaults to 8266
  // ArduinoOTA.setPort(8266);

  // Hostname defaults to esp8266-[ChipID]
  // ArduinoOTA.setHostname("myesp8266");

  // No authentication by default
  // ArduinoOTA.setPassword("admin");

  // Password can be set with it's md5 value as well
  // MD5(admin) = 21232f297a57a5a743894a0e4a801fc3
  // ArduinoOTA.setPasswordHash("21232f297a57a5a743894a0e4a801fc3");
  ArduinoOTA.begin();
  
//========== Pin setup ==========

  pinMode(RELAY_PIN, OUTPUT);

//========== Sensor setup ==========

  sensor.begin();
  // do not block during temperature conversion
  sensor.setWaitForConversion(false);

//========== Tasks init ==========

  startConversion(); // First temp read
  tasker.setInterval(startConversion, 15000); // read temperature every 15 seconds
  //tasker.setTimeout(relayLoop, 5000);
  tasker.setInterval(otaHandle, 1000);

//========== Web server setup ==========

  if(METRICS_EXPORT){
    server.on("/metrics", HTTP_GET, [](AsyncWebServerRequest *request){
        request->send(200, "text/plain; charset=utf-8", metrics);
    });
  }
  server.on("/set", HTTP_GET, [](AsyncWebServerRequest *request){
    //nutno nastavit maxima a minima
    if(THERMOSTAT){
      if (request->hasParam("increaseReqTemp")) {
        reqTemp += request->getParam("increaseReqTemp")->value().toFloat();
        request->send(200, "text/plain; charset=utf-8", String(reqTemp));
      }else if (request->hasParam("decreaseReqTemp")) {
        reqTemp -= request->getParam("decreaseReqTemp")->value().toFloat();
        request->send(200, "text/plain; charset=utf-8", String(reqTemp));
      }else if (request->hasParam("increaseOffset")) {
        offset += request->getParam("increaseOffset")->value().toFloat();
        request->send(200, "text/plain; charset=utf-8", String(offset));
      }else if (request->hasParam("decreaseOffset")) {
        offset -= request->getParam("decreaseOffset")->value().toFloat();
        request->send(200, "text/plain; charset=utf-8", String(offset));
      }else{
        request->send(200, "text/plain; charset=utf-8", "no known parameter");
      }
    }else{
      if (request->hasParam("relay")) {
        boolean state = request->getParam("set")->value() == "1";
        digitalWrite(RELAY_PIN, state);
        request->send(200, "text/plain; charset=utf-8", "success");
      }else{
        request->send(200, "text/plain; charset=utf-8", "no known parameter");
      }
    }
  });
  server.on("/get", HTTP_GET, [](AsyncWebServerRequest *request){
    //nutno vyřešit dotazy na více parametrů najednou
    String repply;

    if(request->hasParam("temp")) {
      repply = temperature;
    }else if(request->hasParam("relay")){
      repply = digitalRead(RELAY_PIN);
    }else if(THERMOSTAT && request->hasParam("reqtemp")){
      repply = reqTemp;
    }else if(THERMOSTAT && request->hasParam("offset")) {
      repply = offset;
    }else{
      repply = "no known parameter";
    }
    
    request->send(200, "text/plain; charset=utf-8", repply);
  });
  server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){
    request->send(200, "text/plain; charset=utf-8", "ESP termostat, tady se bude posílat aplikace z flash paměti");
  });

  server.onNotFound(notFound);
  server.begin();
  
//=================================
}

void loop() {
  tasker.loop();
}

void otaHandle(){
  ArduinoOTA.handle();
}

void notFound(AsyncWebServerRequest *request) {
    request->send(404, "text/plain", "Not found");
}

//void relayLoop(){
//  byte pin = RELAY_PIN;
//  bool led = !digitalRead(pin);
//  digitalWrite(pin, led);
//  tasker.setTimeout(relayLoop, led ? 3000 : 7000);
//}

void readSensor() {
    // read the actual temperature after it's been converted
    temperature = sensor.getTempCByIndex(0) + CORRECTION;
    // do what you need with the temperature here
    metrics = "temp ";
    metrics += temperature;
}

void startConversion() {
    // start temperature conversion (does not block)
    sensor.requestTemperatures();
    // schedule reading the actual temperature in 750 milliseconds
    tasker.setTimeout(readSensor, 750);
}