From f580247581f09bc7c28c4161fe1f9bb74c9add86 Mon Sep 17 00:00:00 2001 From: Roxy-3D Date: Thu, 6 Sep 2018 09:45:29 -0500 Subject: [PATCH] Create pins_FORMBOT_TREX2.h --- Marlin/src/pins/pins_FORMBOT_TREX2.h | 195 +++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 Marlin/src/pins/pins_FORMBOT_TREX2.h diff --git a/Marlin/src/pins/pins_FORMBOT_TREX2.h b/Marlin/src/pins/pins_FORMBOT_TREX2.h new file mode 100644 index 000000000..9af13bdb3 --- /dev/null +++ b/Marlin/src/pins/pins_FORMBOT_TREX2.h @@ -0,0 +1,195 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Formbot pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#if E_STEPPERS > 3 || HOTENDS > 3 + #error "Formbot supports up to 3 hotends / E-steppers. Comment this line to keep going." +#endif + +#define DEFAULT_MACHINE_NAME "Formbot" +#define BOARD_NAME "Formbot" + +// +// Servos +// +#define SERVO0_PIN 11 +#define SERVO1_PIN -1 // was 6 +#define SERVO2_PIN -1 // was 5 +#define SERVO3_PIN -1 + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#ifndef X_MAX_PIN + #define X_MAX_PIN 2 +#endif +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 53 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 49 +#endif + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#ifndef Z_CS_PIN + #define Z_CS_PIN 40 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 42 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 44 +#endif + +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 43 +#define E2_ENABLE_PIN 44 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 3 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card +#else + #define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present +#endif + +// +// Augmentation for auto-assigning RAMPS plugs +// +#if DISABLED(IS_RAMPS_EEB) && DISABLED(IS_RAMPS_EEF) && DISABLED(IS_RAMPS_EFB) && DISABLED(IS_RAMPS_EFF) && DISABLED(IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D) + #if HOTENDS > 1 + #if TEMP_SENSOR_BED + #define IS_RAMPS_EEB + #else + #define IS_RAMPS_EEF + #endif + #elif TEMP_SENSOR_BED + #define IS_RAMPS_EFB + #else + #define IS_RAMPS_EFF + #endif +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 58 + +#define FAN_PIN 9 +#define FAN1_PIN 4 + + +#if DISABLED(ICSP_PORT_SWITCHES) + #define FIL_RUNOUT_PIN 22 + #define FIL_RUNOUT2_PIN 21 +#else + #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define FIL_RUNOUT_PIN 52 + #define FIL_RUNOUT2_PIN 50 + #endif +#endif + +// +// Misc. Functions +// +#define CASE_LIGHT_PIN 8 +#define SDSS 53 +#ifndef ROXYs_TRex + #define LED_PIN 13 +#endif + +// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector +#define FILWIDTH_PIN 5 // Analog Input + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 +#endif + +// +// LCD / Controller +// +// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER +// +#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + #ifndef ROXYs_TRex + #define KILL_PIN 41 + #define BEEPER_PIN 37 + #endif +#endif