From a52fec6ac49e47dc390ccb41990921970479d6da Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 30 Nov 2017 15:55:08 -0600 Subject: [PATCH 1/3] Planner class parity with 1.1.x --- Marlin/src/module/planner.cpp | 60 +++++++++++++++++++---------------- Marlin/src/module/planner.h | 14 ++++---- 2 files changed, 39 insertions(+), 35 deletions(-) diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index e5141429e..151ec22e9 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -105,11 +105,10 @@ float Planner::max_feedrate_mm_s[XYZE_N], // Max speeds in mm per second int16_t Planner::flow_percentage[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(100); // Extrusion factor for each extruder -// Initialized by settings.load() -float Planner::e_factor[EXTRUDERS], // The flow percentage and volumetric multiplier combine to scale E movement - Planner::filament_size[EXTRUDERS], // As a baseline for the multiplier, filament diameter +float Planner::e_factor[EXTRUDERS], // The flow percentage and volumetric multiplier combine to scale E movement + Planner::filament_size[EXTRUDERS], // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder Planner::volumetric_area_nominal = CIRCLE_AREA((DEFAULT_NOMINAL_FILAMENT_DIA) * 0.5), // Nominal cross-sectional area - Planner::volumetric_multiplier[EXTRUDERS]; // May be auto-adjusted by a filament width sensor + Planner::volumetric_multiplier[EXTRUDERS]; // Reciprocal of cross-sectional area of filament (in mm^2). Pre-calculated to reduce computation in the planner uint32_t Planner::max_acceleration_steps_per_s2[XYZE_N], Planner::max_acceleration_mm_per_s2[XYZE_N]; // Use M201 to override by software @@ -129,12 +128,11 @@ float Planner::min_feedrate_mm_s, #if ABL_PLANAR matrix_3x3 Planner::bed_level_matrix; // Transform to compensate for bed level #endif -#endif - -#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - float Planner::z_fade_height, // Initialized by settings.load() - Planner::inverse_z_fade_height, - Planner::last_fade_z; + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + float Planner::z_fade_height, // Initialized by settings.load() + Planner::inverse_z_fade_height, + Planner::last_fade_z; + #endif #endif #if ENABLED(AUTOTEMP) @@ -571,7 +569,7 @@ void Planner::calculate_volumetric_multipliers() { */ void Planner::apply_leveling(float &rx, float &ry, float &rz) { - if (!planner.leveling_active) return; + if (!leveling_active) return; #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) const float fade_scaling_factor = fade_scaling_factor_for_z(rz); @@ -614,20 +612,22 @@ void Planner::calculate_volumetric_multipliers() { void Planner::unapply_leveling(float raw[XYZ]) { - if (!planner.leveling_active) return; + if (!leveling_active) return; #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - if (z_fade_height && raw[Z_AXIS] >= z_fade_height) return; + if (!leveling_active_at_z(raw[Z_AXIS])) return; #endif #if ENABLED(AUTO_BED_LEVELING_UBL) - const float z_correct = ubl.get_z_correction(raw[X_AXIS], raw[Y_AXIS]); - float z_raw = raw[Z_AXIS] - z_correct; + const float z_physical = raw[Z_AXIS], + z_correct = ubl.get_z_correction(raw[X_AXIS], raw[Y_AXIS]), + z_virtual = z_physical - z_correct; + float z_raw = z_virtual; #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - // for P=physical_z, L=raw_z, M=mesh_z, H=fade_height, + // for P=physical_z, L=logical_z, M=mesh_z, H=fade_height, // Given P=L+M(1-L/H) (faded mesh correction formula for L= planner.z_fade_height) - z_raw = raw[Z_AXIS]; + z_raw = z_physical; else z_raw /= 1.0 - z_correct * planner.inverse_z_fade_height; } @@ -646,28 +646,32 @@ void Planner::calculate_volumetric_multipliers() { raw[Z_AXIS] = z_raw; - #elif ENABLED(MESH_BED_LEVELING) + return; // don't fall thru to other ENABLE_LEVELING_FADE_HEIGHT logic - #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - const float c = mbl.get_z(raw[X_AXIS], raw[Y_AXIS], 1.0); - raw[Z_AXIS] = (z_fade_height * (raw[Z_AXIS] - c)) / (z_fade_height - c); - #else - raw[Z_AXIS] -= mbl.get_z(raw[X_AXIS], raw[Y_AXIS]); - #endif + #endif + + #if ENABLED(MESH_BED_LEVELING) + + if (leveling_active) { + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + const float c = mbl.get_z(raw[X_AXIS], raw[Y_AXIS], 1.0); + raw[Z_AXIS] = (z_fade_height * (raw[Z_AXIS]) - c) / (z_fade_height - c); + #else + raw[Z_AXIS] -= mbl.get_z(raw[X_AXIS], raw[Y_AXIS]); + #endif + } #elif ABL_PLANAR matrix_3x3 inverse = matrix_3x3::transpose(bed_level_matrix); float dx = raw[X_AXIS] - (X_TILT_FULCRUM), - dy = raw[Y_AXIS] - (Y_TILT_FULCRUM), - dz = raw[Z_AXIS]; + dy = raw[Y_AXIS] - (Y_TILT_FULCRUM); - apply_rotation_xyz(inverse, dx, dy, dz); + apply_rotation_xyz(inverse, dx, dy, raw[Z_AXIS]); raw[X_AXIS] = dx + X_TILT_FULCRUM; raw[Y_AXIS] = dy + Y_TILT_FULCRUM; - raw[Z_AXIS] = dz; #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index 1e7092128..db9d8efc5 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -144,7 +144,7 @@ class Planner { static uint8_t last_extruder; // Respond to extruder change #endif - static int16_t flow_percentage[EXTRUDERS]; // Extrusion factor for each extruder + static int16_t flow_percentage[EXTRUDERS]; // Extrusion factor for each extruder static float e_factor[EXTRUDERS], // The flow percentage and volumetric multiplier combine to scale E movement filament_size[EXTRUDERS], // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder @@ -167,7 +167,7 @@ class Planner { min_travel_feedrate_mm_s; #if HAS_LEVELING - static bool leveling_active; // Flag that bed leveling is enabled + static bool leveling_active; // Flag that bed leveling is enabled #if ABL_PLANAR static matrix_3x3 bed_level_matrix; // Transform to compensate for bed level #endif @@ -342,12 +342,12 @@ class Planner { /** * Planner::_buffer_line * - * Add a new direct linear movement to the buffer. + * Add a new linear movement to the buffer in axis units. * - * Leveling and kinematics should be applied ahead of this. + * Leveling and kinematics should be applied ahead of calling this. * - * a,b,c,e - target position in mm or degrees - * fr_mm_s - (target) speed of the move (mm/s) + * a,b,c,e - target positions in mm and/or degrees + * fr_mm_s - (target) speed of the move * extruder - target extruder */ static void _buffer_line(const float &a, const float &b, const float &c, const float &e, float fr_mm_s, const uint8_t extruder); @@ -444,7 +444,7 @@ class Planner { if (blocks_queued()) { block_t* block = &block_buffer[block_buffer_tail]; #if ENABLED(ULTRA_LCD) - block_buffer_runtime_us -= block->segment_time_us; //We can't be sure how long an active block will take, so don't count it. + block_buffer_runtime_us -= block->segment_time_us; // We can't be sure how long an active block will take, so don't count it. #endif SBI(block->flag, BLOCK_BIT_BUSY); return block; From ec6ca37ed3d7905a98138e78c5ba5af378eca7b0 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 30 Nov 2017 16:32:20 -0600 Subject: [PATCH 2/3] Fix (un)apply_leveling fade bug --- Marlin/src/module/planner.cpp | 128 +++++++++++++--------------------- 1 file changed, 50 insertions(+), 78 deletions(-) diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index 151ec22e9..4d2ee993b 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -571,28 +571,7 @@ void Planner::calculate_volumetric_multipliers() { if (!leveling_active) return; - #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - const float fade_scaling_factor = fade_scaling_factor_for_z(rz); - if (!fade_scaling_factor) return; - #else - constexpr float fade_scaling_factor = 1.0; - #endif - - #if ENABLED(AUTO_BED_LEVELING_UBL) - - rz += ubl.get_z_correction(rx, ry) * fade_scaling_factor; - - #elif ENABLED(MESH_BED_LEVELING) - - rz += mbl.get_z(rx, ry - #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - , fade_scaling_factor - #endif - ); - - #elif ABL_PLANAR - - UNUSED(fade_scaling_factor); + #if ABL_PLANAR float dx = rx - (X_TILT_FULCRUM), dy = ry - (Y_TILT_FULCRUM); @@ -602,66 +581,43 @@ void Planner::calculate_volumetric_multipliers() { rx = dx + X_TILT_FULCRUM; ry = dy + Y_TILT_FULCRUM; - #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) - - float tmp[XYZ] = { rx, ry, 0 }; - rz += bilinear_z_offset(tmp) * fade_scaling_factor; - - #endif - } - - void Planner::unapply_leveling(float raw[XYZ]) { - - if (!leveling_active) return; - - #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - if (!leveling_active_at_z(raw[Z_AXIS])) return; - #endif - - #if ENABLED(AUTO_BED_LEVELING_UBL) - - const float z_physical = raw[Z_AXIS], - z_correct = ubl.get_z_correction(raw[X_AXIS], raw[Y_AXIS]), - z_virtual = z_physical - z_correct; - float z_raw = z_virtual; + #else #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + const float fade_scaling_factor = fade_scaling_factor_for_z(rz); + if (!fade_scaling_factor) return; + #elif HAS_MESH + constexpr float fade_scaling_factor = 1.0; + #endif - // for P=physical_z, L=logical_z, M=mesh_z, H=fade_height, - // Given P=L+M(1-L/H) (faded mesh correction formula for L= planner.z_fade_height) - z_raw = z_physical; - else - z_raw /= 1.0 - z_correct * planner.inverse_z_fade_height; - } - - #endif // ENABLE_LEVELING_FADE_HEIGHT - - raw[Z_AXIS] = z_raw; + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + const float raw[XYZ] = { rx, ry, 0 }; + #endif - return; // don't fall thru to other ENABLE_LEVELING_FADE_HEIGHT logic + rz += ( + #if ENABLED(AUTO_BED_LEVELING_UBL) + ubl.get_z_correction(rx, ry) * fade_scaling_factor + #elif ENABLED(MESH_BED_LEVELING) + mbl.get_z(rx, ry + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + , fade_scaling_factor + #endif + ) + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + bilinear_z_offset(raw) * fade_scaling_factor + #else + 0 + #endif + ); #endif + } - #if ENABLED(MESH_BED_LEVELING) + void Planner::unapply_leveling(float raw[XYZ]) { - if (leveling_active) { - #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - const float c = mbl.get_z(raw[X_AXIS], raw[Y_AXIS], 1.0); - raw[Z_AXIS] = (z_fade_height * (raw[Z_AXIS]) - c) / (z_fade_height - c); - #else - raw[Z_AXIS] -= mbl.get_z(raw[X_AXIS], raw[Y_AXIS]); - #endif - } + if (!leveling_active) return; - #elif ABL_PLANAR + #if ABL_PLANAR matrix_3x3 inverse = matrix_3x3::transpose(bed_level_matrix); @@ -673,15 +629,31 @@ void Planner::calculate_volumetric_multipliers() { raw[X_AXIS] = dx + X_TILT_FULCRUM; raw[Y_AXIS] = dy + Y_TILT_FULCRUM; - #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + #else #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - const float c = bilinear_z_offset(raw); - raw[Z_AXIS] = (z_fade_height * (raw[Z_AXIS]) - c) / (z_fade_height - c); - #else - raw[Z_AXIS] -= bilinear_z_offset(raw); + const float fade_scaling_factor = fade_scaling_factor_for_z(raw[Z_AXIS]); + if (!fade_scaling_factor) return; + #elif HAS_MESH + constexpr float fade_scaling_factor = 1.0; #endif + raw[Z_AXIS] -= ( + #if ENABLED(AUTO_BED_LEVELING_UBL) + ubl.get_z_correction(raw[X_AXIS], raw[Y_AXIS]) * fade_scaling_factor + #elif ENABLED(MESH_BED_LEVELING) + mbl.get_z(raw[X_AXIS], raw[Y_AXIS] + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + , fade_scaling_factor + #endif + ) + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + bilinear_z_offset(raw) * fade_scaling_factor + #else + 0 + #endif + ); + #endif } From dd3ce408261cb44fa698ea648d6d258bc9f49f40 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 30 Nov 2017 16:38:35 -0600 Subject: [PATCH 3/3] Drop Planner::position_float, use int types --- Marlin/src/module/planner.cpp | 112 +++++++++------------------------- Marlin/src/module/planner.h | 8 +-- 2 files changed, 31 insertions(+), 89 deletions(-) diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index 4d2ee993b..a7e211aa3 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -144,7 +144,7 @@ float Planner::min_feedrate_mm_s, // private: -long Planner::position[NUM_AXIS] = { 0 }; +int32_t Planner::position[NUM_AXIS] = { 0 }; uint32_t Planner::cutoff_long; @@ -164,8 +164,7 @@ float Planner::previous_speed[NUM_AXIS], #if ENABLED(LIN_ADVANCE) float Planner::extruder_advance_k, // Initialized by settings.load() - Planner::advance_ed_ratio, // Initialized by settings.load() - Planner::position_float[NUM_AXIS] = { 0 }; + Planner::advance_ed_ratio; // Initialized by settings.load() #endif #if ENABLED(ULTRA_LCD) @@ -181,9 +180,6 @@ Planner::Planner() { init(); } void Planner::init() { block_buffer_head = block_buffer_tail = 0; ZERO(position); - #if ENABLED(LIN_ADVANCE) - ZERO(position_float); - #endif ZERO(previous_speed); previous_nominal_speed = 0.0; #if ABL_PLANAR @@ -690,13 +686,9 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const } #endif - #if ENABLED(LIN_ADVANCE) - const float mm_D_float = SQRT(sq(a - position_float[X_AXIS]) + sq(b - position_float[Y_AXIS])); - #endif - - const long da = target[X_AXIS] - position[X_AXIS], - db = target[Y_AXIS] - position[Y_AXIS], - dc = target[Z_AXIS] - position[Z_AXIS]; + const int32_t da = target[X_AXIS] - position[X_AXIS], + db = target[Y_AXIS] - position[Y_AXIS], + dc = target[Z_AXIS] - position[Z_AXIS]; /* SERIAL_ECHOPAIR(" Planner FR:", fr_mm_s); @@ -721,19 +713,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const SERIAL_EOL(); //*/ - // DRYRUN ignores all temperature constraints and assures that the extruder is instantly satisfied - if (DEBUGGING(DRYRUN)) { - position[E_AXIS] = target[E_AXIS]; - #if ENABLED(LIN_ADVANCE) - position_float[E_AXIS] = e; - #endif - } - - long de = target[E_AXIS] - position[E_AXIS]; - - #if ENABLED(LIN_ADVANCE) - float de_float = e - position_float[E_AXIS]; // Should this include e_factor? - #endif + int32_t de = target[E_AXIS] - position[E_AXIS]; #if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE) if (de) { @@ -741,10 +721,6 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const if (thermalManager.tooColdToExtrude(extruder)) { position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part de = 0; // no difference - #if ENABLED(LIN_ADVANCE) - position_float[E_AXIS] = e; - de_float = 0; - #endif SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP); } @@ -753,10 +729,6 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const if (labs(de * e_factor[extruder]) > (int32_t)axis_steps_per_mm[E_AXIS_N] * (EXTRUDE_MAXLENGTH)) { // It's not important to get max. extrusion length in a precision < 1mm, so save some cycles and cast to int position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part de = 0; // no difference - #if ENABLED(LIN_ADVANCE) - position_float[E_AXIS] = e; - de_float = 0; - #endif SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); } @@ -1036,7 +1008,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const #endif ); } - const float inverse_millimeters = 1.0 / block->millimeters; // Inverse millimeters to remove multiple divides + float inverse_millimeters = 1.0 / block->millimeters; // Inverse millimeters to remove multiple divides // Calculate moves/second for this move. No divide by zero due to previous checks. float inverse_mm_s = fr_mm_s * inverse_millimeters; @@ -1360,31 +1332,28 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const previous_safe_speed = safe_speed; #if ENABLED(LIN_ADVANCE) - - // - // Use LIN_ADVANCE for blocks if all these are true: - // - // esteps : We have E steps todo (a printing move) - // - // block->steps[X_AXIS] || block->steps[Y_AXIS] : We have a movement in XY direction (i.e., not retract / prime). - // - // extruder_advance_k : There is an advance factor set. - // - // block->steps[E_AXIS] != block->step_event_count : A problem occurs if the move before a retract is too small. - // In that case, the retract and move will be executed together. - // This leads to too many advance steps due to a huge e_acceleration. - // The math is good, but we must avoid retract moves with advance! - // de_float > 0.0 : Extruder is running forward (e.g., for "Wipe while retracting" (Slic3r) or "Combing" (Cura) moves) - // - block->use_advance_lead = esteps - && (block->steps[X_AXIS] || block->steps[Y_AXIS]) + /** + * + * Use LIN_ADVANCE for blocks if all these are true: + * + * esteps && (block->steps[X_AXIS] || block->steps[Y_AXIS]) : This is a print move + * + * extruder_advance_k : There is an advance factor set. + * + * esteps != block->step_event_count : A problem occurs if the move before a retract is too small. + * In that case, the retract and move will be executed together. + * This leads to too many advance steps due to a huge e_acceleration. + * The math is good, but we must avoid retract moves with advance! + * de > 0 : Extruder is running forward (e.g., for "Wipe while retracting" (Slic3r) or "Combing" (Cura) moves) + */ + block->use_advance_lead = esteps && (block->steps[X_AXIS] || block->steps[Y_AXIS]) && extruder_advance_k && (uint32_t)esteps != block->step_event_count - && de_float > 0.0; + && de > 0; if (block->use_advance_lead) block->abs_adv_steps_multiplier8 = LROUND( extruder_advance_k - * (UNEAR_ZERO(advance_ed_ratio) ? de_float / mm_D_float : advance_ed_ratio) // Use the fixed ratio, if set + * (UNEAR_ZERO(advance_ed_ratio) ? de * steps_to_mm[E_AXIS_N] / HYPOT(da * steps_to_mm[X_AXIS], db * steps_to_mm[Y_AXIS]) : advance_ed_ratio) // Use the fixed ratio, if set * (block->nominal_speed / (float)block->nominal_rate) * axis_steps_per_mm[E_AXIS_N] * 256.0 ); @@ -1398,12 +1367,6 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const // Update the position (only when a move was queued) COPY(position, target); - #if ENABLED(LIN_ADVANCE) - position_float[X_AXIS] = a; - position_float[Y_AXIS] = b; - position_float[Z_AXIS] = c; - position_float[E_AXIS] = e; - #endif recalculate(); @@ -1425,16 +1388,10 @@ void Planner::_set_position_mm(const float &a, const float &b, const float &c, c #else #define _EINDEX E_AXIS #endif - const long na = position[X_AXIS] = LROUND(a * axis_steps_per_mm[X_AXIS]), - nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]), - nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]), - ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]); - #if ENABLED(LIN_ADVANCE) - position_float[X_AXIS] = a; - position_float[Y_AXIS] = b; - position_float[Z_AXIS] = c; - position_float[E_AXIS] = e; - #endif + const int32_t na = position[X_AXIS] = LROUND(a * axis_steps_per_mm[X_AXIS]), + nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]), + nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]), + ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]); stepper.set_position(na, nb, nc, ne); previous_nominal_speed = 0.0; // Resets planner junction speeds. Assumes start from rest. ZERO(previous_speed); @@ -1459,16 +1416,8 @@ void Planner::set_position_mm_kinematic(const float position[NUM_AXIS]) { * Sync from the stepper positions. (e.g., after an interrupted move) */ void Planner::sync_from_steppers() { - LOOP_XYZE(i) { + LOOP_XYZE(i) position[i] = stepper.position((AxisEnum)i); - #if ENABLED(LIN_ADVANCE) - position_float[i] = position[i] * steps_to_mm[i - #if ENABLED(DISTINCT_E_FACTORS) - + (i == E_AXIS ? active_extruder : 0) - #endif - ]; - #endif - } } /** @@ -1482,9 +1431,6 @@ void Planner::set_position_mm(const AxisEnum axis, const float &v) { const uint8_t axis_index = axis; #endif position[axis] = LROUND(v * axis_steps_per_mm[axis_index]); - #if ENABLED(LIN_ADVANCE) - position_float[axis] = v; - #endif stepper.set_position(axis, v); previous_speed[axis] = 0.0; } diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index db9d8efc5..b89655d3c 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -186,7 +186,7 @@ class Planner { * The current position of the tool in absolute steps * Recalculated if any axis_steps_per_mm are changed by gcode */ - static long position[NUM_AXIS]; + static int32_t position[NUM_AXIS]; /** * Speed of previous path line segment @@ -220,11 +220,7 @@ class Planner { // Old direction bits. Used for speed calculations static unsigned char old_direction_bits; // Segment times (in µs). Used for speed calculations - static long axis_segment_time_us[2][3]; - #endif - - #if ENABLED(LIN_ADVANCE) - static float position_float[NUM_AXIS]; + static uint32_t axis_segment_time_us[2][3]; #endif #if ENABLED(ULTRA_LCD)