diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 973fae141..02d98b980 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index 973fae141..02d98b980 100644 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 696612376..a92be459a 100644 --- a/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 7f8954747..ac838f525 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h index 0e0382577..03c7b4356 100644 --- a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h index 0e0382577..03c7b4356 100644 --- a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index 331871e73..e4a355172 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -1814,9 +1814,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1827,10 +1827,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 96fb6a073..2cbd5697b 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h b/Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h index 089f7c08e..ab4a2ae4c 100644 --- a/Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/ArmEd/Configuration_adv.h b/Marlin/src/config/examples/ArmEd/Configuration_adv.h index ca396aa21..9bb0f8cdd 100644 --- a/Marlin/src/config/examples/ArmEd/Configuration_adv.h +++ b/Marlin/src/config/examples/ArmEd/Configuration_adv.h @@ -1820,9 +1820,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1833,10 +1833,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index f7f14f4fb..59c4f0fac 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1814,9 +1814,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1827,10 +1827,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h index b93779677..36566a9c0 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index 7cef32549..e6b6c8580 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index 60b8919d5..1c9d92fbf 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1823,9 +1823,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1836,10 +1836,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index 7cef32549..e6b6c8580 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index 596d7cb52..c7771ab3d 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 1e1f491d0..adca69991 100644 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index fa084348c..904ea109d 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h index d0e5624c4..58bcd2a6a 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h index 03383d23d..26574bfc6 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h index b4e49612d..0ff923351 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h index 22b8eab11..0ba93dcfc 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h index dca312e34..bc451683d 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h index 67b0c085b..4423efede 100644 --- a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h +++ b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index f2060816d..01e706d0e 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h index a376176bf..dee3ef2c0 100644 --- a/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1814,9 +1814,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1827,10 +1827,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index c754aadeb..97c70f77b 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h index baac5a8ea..bf0f6f3a1 100644 --- a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1817,9 +1817,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1830,10 +1830,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index d8b7e6fcb..4a49b4dbc 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1820,9 +1820,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1833,10 +1833,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 89d623517..b805afb2e 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1820,9 +1820,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1833,10 +1833,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Geeetech/A10M/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/A10M/Configuration_adv.h index b5fc3b453..ac6d87e81 100644 --- a/Marlin/src/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/A10M/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Geeetech/A20M/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/A20M/Configuration_adv.h index dce5bb7b9..62a57a90e 100644 --- a/Marlin/src/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 1a89ced62..12a615a6b 100644 --- a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 000c21265..d1e03c959 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 000c21265..d1e03c959 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index 9edfd22e5..17c219d6a 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index 581061853..fa23ef394 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index 115beaf86..60a6b326e 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index 7e454abba..952433b02 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index 34cd260fa..bf6440ec4 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 3979836eb..d68637944 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h index 5d51e5fe0..2d9cfc625 100644 --- a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index 278961994..9325d0b27 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -1823,9 +1823,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1836,10 +1836,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h b/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h index 728994d89..172a78765 100644 --- a/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index e233ec781..6a8e02287 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index 7ec494b08..04f55bf5e 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index ae9531c6d..df1a45ee6 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index 5b8cac5ac..54c8c1913 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index 6ea4bd899..c5ca35341 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h index 4317d0ac8..c365f242a 100644 --- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h index e0069a468..90f37df4b 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index 9a8346a27..5b157fd09 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h index 24915df99..bedf3d497 100644 --- a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h +++ b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index 936415d71..1232065e6 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -1828,9 +1828,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1841,10 +1841,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index 699092e83..d47966894 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h b/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h index 8fc2e81de..58881627c 100644 --- a/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 6c4b9a89c..c47b253c7 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1817,9 +1817,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1830,10 +1830,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 73764c0eb..3e5cbd9e2 100644 --- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1817,9 +1817,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1830,10 +1830,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index e1c13a5ca..a0c14b1ff 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1817,9 +1817,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1830,10 +1830,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index e1c13a5ca..a0c14b1ff 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1817,9 +1817,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1830,10 +1830,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 354a4f0f0..bc4077a55 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1817,9 +1817,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1830,10 +1830,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 27dafd20f..19877be5c 100644 --- a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1818,9 +1818,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1831,10 +1831,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h index 9b7c917e9..761123301 100644 --- a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1817,9 +1817,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1830,10 +1830,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 597336c2f..2db509810 100644 --- a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1817,9 +1817,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1830,10 +1830,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index 354a4f0f0..bc4077a55 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -1817,9 +1817,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1830,10 +1830,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index 4edd16ca5..fbcea310f 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index b271a0eaf..64d55d783 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1817,9 +1817,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1830,10 +1830,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index fddc0bcc9..cb811ce59 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index 9607d97d9..a82a92a69 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index e838ec7f3..0dcc938bb 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1815,9 +1815,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1828,10 +1828,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index c617cca9d..1ca720f0a 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -1816,9 +1816,9 @@ //#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) // Canon RC-1 or homebrew digital camera trigger // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ @@ -1829,10 +1829,10 @@ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) #endif /** diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp index 5226807e6..7dc63786d 100644 --- a/Marlin/src/feature/pause.cpp +++ b/Marlin/src/feature/pause.cpp @@ -111,12 +111,12 @@ static bool ensure_safe_temperature(const AdvancedPauseMode mode=ADVANCED_PAUSE_ return thermalManager.wait_for_hotend(active_extruder); } -void do_pause_e_move(const float &length, const float &fr) { +void do_pause_e_move(const float &length, const float &fr_mm_s) { #if HAS_FILAMENT_SENSOR runout.reset(); #endif current_position[E_AXIS] += length / planner.e_factor[active_extruder]; - planner.buffer_line(current_position, fr, active_extruder); + planner.buffer_line(current_position, fr_mm_s, active_extruder); planner.synchronize(); } diff --git a/Marlin/src/feature/pause.h b/Marlin/src/feature/pause.h index 621a70934..6e82013a4 100644 --- a/Marlin/src/feature/pause.h +++ b/Marlin/src/feature/pause.h @@ -79,7 +79,7 @@ extern uint8_t did_pause_print; #define DXC_PASS #endif -void do_pause_e_move(const float &length, const float &fr); +void do_pause_e_move(const float &length, const float &fr_mm_s); bool pause_print(const float &retract, const point_t &park_point, const float &unload_length=0, const bool show_lcd=false DXC_PARAMS); diff --git a/Marlin/src/gcode/feature/camera/M240.cpp b/Marlin/src/gcode/feature/camera/M240.cpp index c3cd5ab13..689252a35 100644 --- a/Marlin/src/gcode/feature/camera/M240.cpp +++ b/Marlin/src/gcode/feature/camera/M240.cpp @@ -42,30 +42,29 @@ #include "../../../feature/pause.h" #endif - inline void e_move_m240(const float length) { - if (_PHOTO_RETRACT_MM) { - constexpr float rfr = (MMS_TO_MMM( + #ifdef PHOTO_RETRACT_MM + inline void e_move_m240(const float length, const float fr_mm_s) { + if (length && thermalManager.hotEnoughToExtrude(active_extruder)) { #if ENABLED(ADVANCED_PAUSE_FEATURE) - PAUSE_PARK_RETRACT_FEEDRATE - #elif ENABLED(FWRETRACT) - RETRACT_FEEDRATE - #else - 45 - #endif - )); - if (thermalManager.hotEnoughToExtrude(active_extruder)) { - #if ENABLED(ADVANCED_PAUSE_FEATURE) - do_pause_e_move(length, rfr); + do_pause_e_move(length, fr_mm_s); #else current_position[E_AXIS] += length / planner.e_factor[active_extruder]; - planner.buffer_line(current_position, MMM_TO_MMS(rfr), active_extruder); + planner.buffer_line(current_position, fr_mm_s, active_extruder); #endif } } - } + #endif #endif +#if PIN_EXISTS(PHOTOGRAPH) + constexpr uint8_t NUM_PULSES = 16; + constexpr float PULSE_LENGTH = 0.01524; + inline void set_photo_pin(const uint8_t state) { WRITE(PHOTOGRAPH_PIN, state); _delay_ms(PULSE_LENGTH); } + inline void tweak_photo_pin() { set_photo_pin(HIGH); set_photo_pin(LOW); } + inline void spin_photo_pin() { for (uint8_t i = NUM_PULSES; i--;) tweak_photo_pin(); } +#endif + /** * M240: Trigger a camera by... * @@ -75,20 +74,41 @@ * See http://www.doc-diy.net/photo/rc-1_hacked/ * - PHOTO_SWITCH_POSITION : Bump a physical switch with the X-carriage using a * configured position, delay, and retract length. - * Parameters: - * X - Move to X before triggering the shutter (Requires PHOTO_POSITION) - * Y - Move to Y before triggering the shutter (Requires PHOTO_POSITION) - * Z - Raise Z by a distance before triggering the shutter (Requires PHOTO_POSITION) - * P - Delay (ms) after triggering the shutter + * + * PHOTO_POSITION parameters: + * R - Retract/recover length (current units) + * S - Retract/recover feedrate (mm/m) + * X - Move to X before triggering the shutter + * Y - Move to Y before triggering the shutter + * Z - Raise Z by a distance before triggering the shutter + * + * PHOTO_SWITCH_POSITION parameters: + * D - Duration (ms) to hold down switch (Requires PHOTO_SWITCH_MS) + * P - Delay (ms) after triggering the shutter (Requires PHOTO_SWITCH_MS) + * I - Switch trigger position override X + * J - Switch trigger position override Y */ void GcodeSuite::M240() { #ifdef PHOTO_POSITION + if (axis_unhomed_error()) return; + const float old_pos[XYZ] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] }; #ifdef PHOTO_RETRACT_MM - e_move_m240(-(_PHOTO_RETRACT_MM)); + constexpr float rfr = (MMS_TO_MMM( + #if ENABLED(ADVANCED_PAUSE_FEATURE) + PAUSE_PARK_RETRACT_FEEDRATE + #elif ENABLED(FWRETRACT) + RETRACT_FEEDRATE + #else + 45 + #endif + )); + const float rval = parser.seenval('R') ? parser.value_linear_units() : _PHOTO_RETRACT_MM, + sval = parser.seenval('S') ? MMM_TO_MMS(parser.value_feedrate()) : rfr; + e_move_m240(-rval, sval); #endif constexpr float photo_position[XYZ] = PHOTO_POSITION; @@ -101,10 +121,14 @@ void GcodeSuite::M240() { do_blocking_move_to(raw); #ifdef PHOTO_SWITCH_POSITION - const float photo_switch_position[2] = PHOTO_SWITCH_POSITION; - do_blocking_move_to_xy(photo_switch_position[X_AXIS], photo_switch_position[Y_AXIS], get_homing_bump_feedrate(X_AXIS)); + constexpr float photo_switch_position[2] = PHOTO_SWITCH_POSITION; + const float sraw[] = { + parser.seenval('I') ? RAW_X_POSITION(parser.value_linear_units()) : photo_switch_position[X_AXIS], + parser.seenval('J') ? RAW_Y_POSITION(parser.value_linear_units()) : photo_switch_position[Y_AXIS] + }; + do_blocking_move_to_xy(sraw[X_AXIS], sraw[Y_AXIS], get_homing_bump_feedrate(X_AXIS)); #if PHOTO_SWITCH_MS > 0 - safe_delay(PHOTO_SWITCH_MS); + safe_delay(parser.intval('D', PHOTO_SWITCH_MS)); #endif do_blocking_move_to(raw); #endif @@ -118,21 +142,9 @@ void GcodeSuite::M240() { #elif HAS_PHOTOGRAPH - const uint8_t NUM_PULSES = 16; - const float PULSE_LENGTH = 0.01524; - for (int i = 0; i < NUM_PULSES; i++) { - WRITE(PHOTOGRAPH_PIN, HIGH); - _delay_ms(PULSE_LENGTH); - WRITE(PHOTOGRAPH_PIN, LOW); - _delay_ms(PULSE_LENGTH); - } + spin_photo_pin(); delay(7.33); - for (int i = 0; i < NUM_PULSES; i++) { - WRITE(PHOTOGRAPH_PIN, HIGH); - _delay_ms(PULSE_LENGTH); - WRITE(PHOTOGRAPH_PIN, LOW); - _delay_ms(PULSE_LENGTH); - } + spin_photo_pin(); #endif @@ -142,7 +154,7 @@ void GcodeSuite::M240() { #endif do_blocking_move_to(old_pos); #ifdef PHOTO_RETRACT_MM - e_move_m240(_PHOTO_RETRACT_MM); + e_move_m240(rval, sval); #endif #endif }