From df1e51258a8bcc432deed9f5bd60df41a75b2c32 Mon Sep 17 00:00:00 2001 From: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Tue, 24 Sep 2019 22:29:21 -0400 Subject: [PATCH] Add M851 X Y probe offsets (#15202) --- Marlin/Configuration.h | 19 ++-- Marlin/src/HAL/HAL_AVR/Servo.cpp | 2 +- Marlin/src/core/language.h | 2 +- Marlin/src/core/utility.cpp | 22 ++--- Marlin/src/feature/bedlevel/ubl/ubl.cpp | 6 +- Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp | 43 ++++----- Marlin/src/gcode/bedlevel/G42.cpp | 10 +- Marlin/src/gcode/bedlevel/M420.cpp | 20 ++-- Marlin/src/gcode/bedlevel/abl/G29.cpp | 20 ++-- Marlin/src/gcode/calibrate/G28.cpp | 4 +- Marlin/src/gcode/calibrate/M48.cpp | 8 +- Marlin/src/gcode/gcode.h | 2 +- Marlin/src/gcode/motion/M290.cpp | 4 +- Marlin/src/gcode/probe/G30.cpp | 4 +- Marlin/src/gcode/probe/M851.cpp | 42 ++++++-- Marlin/src/inc/Conditionals_post.h | 95 +++++++------------ Marlin/src/inc/SanityCheck.h | 48 ++++------ Marlin/src/lcd/extensible_ui/ui_api.cpp | 6 +- Marlin/src/lcd/menu/menu.cpp | 8 +- Marlin/src/lcd/menu/menu_bed_corners.cpp | 4 +- Marlin/src/lcd/menu/menu_bed_leveling.cpp | 2 +- Marlin/src/lcd/menu/menu_configuration.cpp | 2 +- Marlin/src/module/configuration_store.cpp | 39 ++++---- Marlin/src/module/delta.cpp | 2 +- Marlin/src/module/motion.cpp | 8 +- Marlin/src/module/motion.h | 16 ++-- Marlin/src/module/probe.cpp | 51 ++++++++-- Marlin/src/module/probe.h | 9 +- config/default/Configuration.h | 19 ++-- .../examples/3DFabXYZ/Migbot/Configuration.h | 19 ++-- .../ADIMLab/Gantry v1/Configuration.h | 19 ++-- .../ADIMLab/Gantry v2/Configuration.h | 19 ++-- .../AlephObjects/TAZ4/Configuration.h | 19 ++-- .../Alfawise/U20-bltouch/Configuration.h | 21 ++-- config/examples/Alfawise/U20/Configuration.h | 21 ++-- .../AliExpress/CL-260/Configuration.h | 19 ++-- .../AliExpress/UM2pExt/Configuration.h | 19 ++-- config/examples/Anet/A2/Configuration.h | 19 ++-- config/examples/Anet/A2plus/Configuration.h | 19 ++-- config/examples/Anet/A6/Configuration.h | 59 ++---------- config/examples/Anet/A8/Configuration.h | 19 ++-- config/examples/Anet/A8plus/Configuration.h | 19 ++-- config/examples/Anet/E16/Configuration.h | 19 ++-- config/examples/AnyCubic/i3/Configuration.h | 19 ++-- config/examples/ArmEd/Configuration.h | 19 ++-- config/examples/Azteeg/X5GT/Configuration.h | 19 ++-- .../BIBO/TouchX/cyclops/Configuration.h | 19 ++-- .../BIBO/TouchX/default/Configuration.h | 19 ++-- config/examples/BQ/Hephestos/Configuration.h | 19 ++-- .../examples/BQ/Hephestos_2/Configuration.h | 19 ++-- config/examples/BQ/WITBOX/Configuration.h | 19 ++-- config/examples/Cartesio/Configuration.h | 19 ++-- .../examples/Creality/CR-10/Configuration.h | 19 ++-- .../examples/Creality/CR-10S/Configuration.h | 19 ++-- .../Creality/CR-10_5S/Configuration.h | 19 ++-- .../Creality/CR-10mini/Configuration.h | 19 ++-- .../Creality/CR-20 Pro/Configuration.h | 19 ++-- .../examples/Creality/CR-20/Configuration.h | 19 ++-- config/examples/Creality/CR-8/Configuration.h | 19 ++-- .../examples/Creality/Ender-2/Configuration.h | 19 ++-- .../examples/Creality/Ender-3/Configuration.h | 19 ++-- .../examples/Creality/Ender-4/Configuration.h | 19 ++-- .../examples/Creality/Ender-5/Configuration.h | 19 ++-- .../Dagoma/Disco Ultimate/Configuration.h | 19 ++-- .../Sidewinder X1/Configuration.h | 19 ++-- config/examples/Einstart-S/Configuration.h | 19 ++-- config/examples/FYSETC/AIO_II/Configuration.h | 19 ++-- .../Cheetah 1.2/BLTouch/Configuration.h | 19 ++-- .../FYSETC/Cheetah 1.2/base/Configuration.h | 19 ++-- .../FYSETC/Cheetah/BLTouch/Configuration.h | 19 ++-- .../FYSETC/Cheetah/base/Configuration.h | 19 ++-- config/examples/FYSETC/F6_13/Configuration.h | 19 ++-- config/examples/Felix/Configuration.h | 19 ++-- config/examples/Felix/DUAL/Configuration.h | 19 ++-- .../FlashForge/CreatorPro/Configuration.h | 19 ++-- .../FolgerTech/i3-2020/Configuration.h | 19 ++-- .../examples/Formbot/Raptor/Configuration.h | 19 ++-- .../examples/Formbot/T_Rex_2+/Configuration.h | 19 ++-- .../examples/Formbot/T_Rex_3/Configuration.h | 19 ++-- config/examples/Geeetech/A10/Configuration.h | 19 ++-- config/examples/Geeetech/A10M/Configuration.h | 19 ++-- config/examples/Geeetech/A20M/Configuration.h | 19 ++-- .../examples/Geeetech/GT2560/Configuration.h | 19 ++-- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 19 ++-- .../Geeetech/MeCreator2/Configuration.h | 19 ++-- .../Prusa i3 Pro B/bltouch/Configuration.h | 19 ++-- .../Prusa i3 Pro B/noprobe/Configuration.h | 19 ++-- .../Geeetech/Prusa i3 Pro C/Configuration.h | 19 ++-- .../Geeetech/Prusa i3 Pro W/Configuration.h | 19 ++-- config/examples/HMS434/Configuration.h | 19 ++-- .../examples/Infitary/i3-M508/Configuration.h | 19 ++-- config/examples/JGAurora/A1/Configuration.h | 19 ++-- config/examples/JGAurora/A5/Configuration.h | 19 ++-- config/examples/JGAurora/A5S/Configuration.h | 19 ++-- config/examples/MakerParts/Configuration.h | 19 ++-- config/examples/Malyan/M150/Configuration.h | 19 ++-- config/examples/Malyan/M200/Configuration.h | 19 ++-- .../Micromake/C1/basic/Configuration.h | 19 ++-- .../Micromake/C1/enhanced/Configuration.h | 19 ++-- config/examples/Mks/Robin/Configuration.h | 19 ++-- config/examples/Mks/Sbase/Configuration.h | 19 ++-- .../Printrbot/PrintrboardG2/Configuration.h | 19 ++-- .../examples/RapideLite/RL200/Configuration.h | 19 ++-- .../examples/RepRapPro/Huxley/Configuration.h | 19 ++-- .../RepRapWorld/Megatronics/Configuration.h | 19 ++-- config/examples/RigidBot/Configuration.h | 19 ++-- config/examples/SCARA/Configuration.h | 19 ++-- .../STM32/Black_STM32F407VET6/Configuration.h | 19 ++-- .../examples/STM32/STM32F103R/Configuration.h | 19 ++-- config/examples/STM32/STM32F4/Configuration.h | 19 ++-- .../STM32/stm32f103ret6/Configuration.h | 19 ++-- config/examples/Sanguinololu/Configuration.h | 19 ++-- .../Tevo/Michelangelo/Configuration.h | 19 ++-- .../Tevo/Tarantula Pro/Configuration.h | 19 ++-- .../Tornado/V1 (MKS Base)/Configuration.h | 19 ++-- .../Tornado/V2 (MKS GEN-L)/Configuration.h | 19 ++-- config/examples/TheBorg/Configuration.h | 19 ++-- config/examples/TinyBoy2/Configuration.h | 19 ++-- config/examples/Tronxy/X1/Configuration.h | 19 ++-- config/examples/Tronxy/X3A/Configuration.h | 19 ++-- config/examples/Tronxy/X5S-2E/Configuration.h | 19 ++-- config/examples/Tronxy/X5S/Configuration.h | 19 ++-- config/examples/Tronxy/XY100/Configuration.h | 19 ++-- .../UltiMachine/Archim1/Configuration.h | 19 ++-- .../UltiMachine/Archim2/Configuration.h | 19 ++-- config/examples/VORONDesign/Configuration.h | 19 ++-- .../examples/Velleman/K8200/Configuration.h | 19 ++-- .../examples/Velleman/K8400/Configuration.h | 19 ++-- .../Velleman/K8400/Dual-head/Configuration.h | 19 ++-- .../examples/WASP/PowerWASP/Configuration.h | 19 ++-- .../Wanhao/Duplicator 6/Configuration.h | 19 ++-- .../Wanhao/Duplicator i3 Mini/Configuration.h | 19 ++-- .../examples/adafruit/ST7565/Configuration.h | 19 ++-- .../delta/Anycubic/Kossel/Configuration.h | 24 ++--- .../delta/Dreammaker/Overlord/Configuration.h | 19 ++-- .../Dreammaker/Overlord_Pro/Configuration.h | 19 ++-- .../FLSUN/auto_calibrate/Configuration.h | 19 ++-- .../delta/FLSUN/kossel/Configuration.h | 19 ++-- .../delta/FLSUN/kossel_mini/Configuration.h | 19 ++-- .../Geeetech/Rostock 301/Configuration.h | 19 ++-- .../delta/Hatchbox_Alpha/Configuration.h | 19 ++-- .../examples/delta/MKS/SBASE/Configuration.h | 19 ++-- .../delta/Tevo Little Monster/Configuration.h | 19 ++-- config/examples/delta/generic/Configuration.h | 19 ++-- .../delta/kossel_mini/Configuration.h | 19 ++-- .../examples/delta/kossel_pro/Configuration.h | 20 ++-- .../examples/delta/kossel_xl/Configuration.h | 19 ++-- .../examples/gCreate/gMax1.5+/Configuration.h | 19 ++-- config/examples/makibox/Configuration.h | 21 ++-- config/examples/tvrrug/Round2/Configuration.h | 19 ++-- config/examples/wt150/Configuration.h | 19 ++-- 151 files changed, 1009 insertions(+), 1878 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 6f2716015..5935f9926 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/Marlin/src/HAL/HAL_AVR/Servo.cpp b/Marlin/src/HAL/HAL_AVR/Servo.cpp index 58e220cba..33818edb9 100644 --- a/Marlin/src/HAL/HAL_AVR/Servo.cpp +++ b/Marlin/src/HAL/HAL_AVR/Servo.cpp @@ -131,7 +131,7 @@ void initISR(timer16_Sequence_t timer) { TCCR1A = 0; // normal counting mode TCCR1B = _BV(CS11); // set prescaler of 8 TCNT1 = 0; // clear the timer count - #if defined(__AVR_ATmega8__)|| defined(__AVR_ATmega128__) + #if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__) SBI(TIFR, OCF1A); // clear any pending interrupts; SBI(TIMSK, OCIE1A); // enable the output compare interrupt #else diff --git a/Marlin/src/core/language.h b/Marlin/src/core/language.h index 71fedff03..ee4e23fa7 100644 --- a/Marlin/src/core/language.h +++ b/Marlin/src/core/language.h @@ -198,7 +198,7 @@ #define MSG_Z3_MAX "z3_max" #define MSG_Z_PROBE "z_probe" #define MSG_FILAMENT_RUNOUT_SENSOR "filament" -#define MSG_PROBE_Z_OFFSET "Probe Z Offset" +#define MSG_PROBE_OFFSET "Probe Offset" #define MSG_SKEW_MIN "min_skew_factor: " #define MSG_SKEW_MAX "max_skew_factor: " #define MSG_ERR_MATERIAL_INDEX "M145 S out of range (0-1)" diff --git a/Marlin/src/core/utility.cpp b/Marlin/src/core/utility.cpp index 2bb6878a4..2724cdebf 100644 --- a/Marlin/src/core/utility.cpp +++ b/Marlin/src/core/utility.cpp @@ -79,40 +79,36 @@ void safe_delay(millis_t ms) { ); #if HAS_BED_PROBE - SERIAL_ECHOPAIR( - "Probe Offset X:" STRINGIFY(X_PROBE_OFFSET_FROM_EXTRUDER) - " Y:" STRINGIFY(Y_PROBE_OFFSET_FROM_EXTRUDER) - " Z:", zprobe_zoffset - ); - if ((X_PROBE_OFFSET_FROM_EXTRUDER) > 0) + SERIAL_ECHOPAIR("Probe Offset X:", zprobe_offset[X_AXIS], " Y:", zprobe_offset[Y_AXIS], " Z:", zprobe_offset[Z_AXIS]); + if (zprobe_offset[X_AXIS] > 0) SERIAL_ECHOPGM(" (Right"); - else if ((X_PROBE_OFFSET_FROM_EXTRUDER) < 0) + else if (zprobe_offset[X_AXIS] < 0) SERIAL_ECHOPGM(" (Left"); - else if ((Y_PROBE_OFFSET_FROM_EXTRUDER) != 0) + else if (zprobe_offset[Y_AXIS] != 0) SERIAL_ECHOPGM(" (Middle"); else SERIAL_ECHOPGM(" (Aligned With"); - if ((Y_PROBE_OFFSET_FROM_EXTRUDER) > 0) { + if (zprobe_offset[Y_AXIS] > 0) { #if IS_SCARA SERIAL_ECHOPGM("-Distal"); #else SERIAL_ECHOPGM("-Back"); #endif } - else if ((Y_PROBE_OFFSET_FROM_EXTRUDER) < 0) { + else if (zprobe_offset[Y_AXIS] < 0) { #if IS_SCARA SERIAL_ECHOPGM("-Proximal"); #else SERIAL_ECHOPGM("-Front"); #endif } - else if ((X_PROBE_OFFSET_FROM_EXTRUDER) != 0) + else if (zprobe_offset[X_AXIS] != 0) SERIAL_ECHOPGM("-Center"); - if (zprobe_zoffset < 0) + if (zprobe_offset[Z_AXIS] < 0) SERIAL_ECHOPGM(" & Below"); - else if (zprobe_zoffset > 0) + else if (zprobe_offset[Z_AXIS] > 0) SERIAL_ECHOPGM(" & Above"); else SERIAL_ECHOPGM(" & Same Z as"); diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.cpp b/Marlin/src/feature/bedlevel/ubl/ubl.cpp index 10a3b90dc..edd2fc369 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl.cpp @@ -177,11 +177,11 @@ serialprintPGM(csv ? PSTR("CSV:\n") : PSTR("LCD:\n")); } - // Add XY_PROBE_OFFSET_FROM_EXTRUDER because probe_pt() subtracts these when + // Add XY probe offset from extruder because probe_pt() subtracts them when // moving to the xy position to be measured. This ensures better agreement between // the current Z position after G28 and the mesh values. - const float current_xi = find_closest_x_index(current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER), - current_yi = find_closest_y_index(current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER); + const float current_xi = find_closest_x_index(current_position[X_AXIS] + zprobe_offset[X_AXIS]), + current_yi = find_closest_y_index(current_position[Y_AXIS] + zprobe_offset[Y_AXIS]); if (!lcd) SERIAL_EOL(); for (int8_t j = GRID_MAX_POINTS_Y - 1; j >= 0; j--) { diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp index 9ee05a5a7..e588515f6 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp @@ -290,7 +290,7 @@ * especially better for Delta printers, since it populates the center of the mesh first, allowing for * a quicker test print to verify settings. You don't need to populate the entire mesh to use it. * After all, you don't want to spend a lot of time generating a mesh only to realize the resolution - * or zprobe_zoffset are incorrect. Mesh-generation gathers points starting closest to the nozzle unless + * or probe offsets are incorrect. Mesh-generation gathers points starting closest to the nozzle unless * an (X,Y) coordinate pair is given. * * Unified Bed Leveling uses a lot of EEPROM storage to hold its data, and it takes some effort to get @@ -453,7 +453,7 @@ SERIAL_ECHO(g29_y_pos); SERIAL_ECHOLNPGM(").\n"); } - probe_entire_mesh(g29_x_pos + X_PROBE_OFFSET_FROM_EXTRUDER, g29_y_pos + Y_PROBE_OFFSET_FROM_EXTRUDER, + probe_entire_mesh(g29_x_pos + zprobe_offset[X_AXIS], g29_y_pos + zprobe_offset[Y_AXIS], parser.seen('T'), parser.seen('E'), parser.seen('U')); report_current_position(); @@ -482,8 +482,8 @@ g29_x_pos = X_HOME_POS; g29_y_pos = Y_HOME_POS; #else // cartesian - g29_x_pos = X_PROBE_OFFSET_FROM_EXTRUDER > 0 ? X_BED_SIZE : 0; - g29_y_pos = Y_PROBE_OFFSET_FROM_EXTRUDER < 0 ? Y_BED_SIZE : 0; + g29_x_pos = zprobe_offset[X_AXIS] > 0 ? X_BED_SIZE : 0; + g29_y_pos = zprobe_offset[Y_AXIS] < 0 ? Y_BED_SIZE : 0; #endif } @@ -800,8 +800,8 @@ restore_ubl_active_state_and_leave(); do_blocking_move_to_xy( - constrain(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), MESH_MIN_X, MESH_MAX_X), - constrain(ry - (Y_PROBE_OFFSET_FROM_EXTRUDER), MESH_MIN_Y, MESH_MAX_Y) + constrain(rx - zprobe_offset[X_AXIS], MESH_MIN_X, MESH_MAX_X), + constrain(ry - zprobe_offset[Y_AXIS], MESH_MIN_Y, MESH_MAX_Y) ); } @@ -1281,8 +1281,8 @@ out_mesh.distance = -99999.9f; // Get our reference position. Either the nozzle or probe location. - const float px = rx + (probe_as_reference == USE_PROBE_AS_REFERENCE ? X_PROBE_OFFSET_FROM_EXTRUDER : 0), - py = ry + (probe_as_reference == USE_PROBE_AS_REFERENCE ? Y_PROBE_OFFSET_FROM_EXTRUDER : 0); + const float px = rx + (probe_as_reference == USE_PROBE_AS_REFERENCE ? zprobe_offset[X_AXIS] : 0), + py = ry + (probe_as_reference == USE_PROBE_AS_REFERENCE ? zprobe_offset[Y_AXIS] : 0); float best_so_far = 99999.99f; @@ -1384,22 +1384,17 @@ #include "../../../libs/vector_3.h" void unified_bed_leveling::tilt_mesh_based_on_probed_grid(const bool do_3_pt_leveling) { - constexpr int16_t x_min = _MAX(MIN_PROBE_X, MESH_MIN_X), - x_max = _MIN(MAX_PROBE_X, MESH_MAX_X), - y_min = _MAX(MIN_PROBE_Y, MESH_MIN_Y), - y_max = _MIN(MAX_PROBE_Y, MESH_MAX_Y); - - bool abort_flag = false; + const float x_min = probe_min_x(), x_max = probe_max_x(), + y_min = probe_min_y(), y_max = probe_max_y(), + dx = (x_max - x_min) / (g29_grid_size - 1), + dy = (y_max - y_min) / (g29_grid_size - 1); float measured_z; + bool abort_flag = false; - const float dx = float(x_max - x_min) / (g29_grid_size - 1), - dy = float(y_max - y_min) / (g29_grid_size - 1); + //float z1, z2, z3; // Needed for algorithm validation below struct linear_fit_data lsf_results; - - //float z1, z2, z3; // Needed for algorithm validation down below. - incremental_LSF_reset(&lsf_results); if (do_3_pt_leveling) { @@ -1478,9 +1473,9 @@ uint16_t total_points = g29_grid_size * g29_grid_size, point_num = 1; for (uint8_t ix = 0; ix < g29_grid_size; ix++) { - const float rx = float(x_min) + ix * dx; + const float rx = x_min + ix * dx; for (int8_t iy = 0; iy < g29_grid_size; iy++) { - const float ry = float(y_min) + dy * (zig_zag ? g29_grid_size - 1 - iy : iy); + const float ry = y_min + dy * (zig_zag ? g29_grid_size - 1 - iy : iy); if (!abort_flag) { SERIAL_ECHOLNPAIR("Tilting mesh point ", point_num, "/", total_points, "\n"); @@ -1505,7 +1500,7 @@ DEBUG_ECHOPAIR_F(" correction: ", get_z_correction(rx, ry), 7); } - measured_z -= get_z_correction(rx, ry) /* + zprobe_zoffset */ ; + measured_z -= get_z_correction(rx, ry) /* + zprobe_offset[Z_AXIS] */ ; if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR_F(" final >>>---> ", measured_z, 7); @@ -1711,13 +1706,13 @@ serial_delay(50); #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - SERIAL_ECHOLNPAIR_F("planner.z_fade_height : ", planner.z_fade_height, 4); + SERIAL_ECHOLNPAIR_F("Fade Height M420 Z", planner.z_fade_height, 4); #endif adjust_mesh_to_mean(g29_c_flag, g29_constant); #if HAS_BED_PROBE - SERIAL_ECHOLNPAIR_F("zprobe_zoffset: ", zprobe_zoffset, 7); + SERIAL_ECHOLNPAIR_F("Probe Offset M851 Z", zprobe_offset[Z_AXIS], 7); #endif SERIAL_ECHOLNPAIR("MESH_MIN_X " STRINGIFY(MESH_MIN_X) "=", MESH_MIN_X); serial_delay(50); diff --git a/Marlin/src/gcode/bedlevel/G42.cpp b/Marlin/src/gcode/bedlevel/G42.cpp index 3240b94e8..f5336cdcb 100644 --- a/Marlin/src/gcode/bedlevel/G42.cpp +++ b/Marlin/src/gcode/bedlevel/G42.cpp @@ -47,10 +47,12 @@ void GcodeSuite::G42() { set_destination_from_current(); if (hasI) destination[X_AXIS] = _GET_MESH_X(ix); if (hasJ) destination[Y_AXIS] = _GET_MESH_Y(iy); - if (parser.boolval('P')) { - if (hasI) destination[X_AXIS] -= X_PROBE_OFFSET_FROM_EXTRUDER; - if (hasJ) destination[Y_AXIS] -= Y_PROBE_OFFSET_FROM_EXTRUDER; - } + #if HAS_BED_PROBE + if (parser.boolval('P')) { + if (hasI) destination[X_AXIS] -= zprobe_offset[X_AXIS]; + if (hasJ) destination[Y_AXIS] -= zprobe_offset[Y_AXIS]; + } + #endif const float fval = parser.linearval('F'); if (fval > 0.0) feedrate_mm_s = MMM_TO_MMS(fval); diff --git a/Marlin/src/gcode/bedlevel/M420.cpp b/Marlin/src/gcode/bedlevel/M420.cpp index 982ec6e03..311619acc 100644 --- a/Marlin/src/gcode/bedlevel/M420.cpp +++ b/Marlin/src/gcode/bedlevel/M420.cpp @@ -64,10 +64,12 @@ void GcodeSuite::M420() { #if ENABLED(MARLIN_DEV_MODE) if (parser.intval('S') == 2) { #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - bilinear_start[X_AXIS] = MIN_PROBE_X; - bilinear_start[Y_AXIS] = MIN_PROBE_Y; - bilinear_grid_spacing[X_AXIS] = (MAX_PROBE_X - (MIN_PROBE_X)) / (GRID_MAX_POINTS_X - 1); - bilinear_grid_spacing[Y_AXIS] = (MAX_PROBE_Y - (MIN_PROBE_Y)) / (GRID_MAX_POINTS_Y - 1); + const float x_min = probe_min_x(), x_max = probe_max_x(), + y_min = probe_min_y(), y_max = probe_max_y(); + bilinear_start[X_AXIS] = x_min; + bilinear_start[Y_AXIS] = y_min; + bilinear_grid_spacing[X_AXIS] = (x_max - x_min) / (GRID_MAX_POINTS_X - 1); + bilinear_grid_spacing[Y_AXIS] = (y_max - y_min) / (GRID_MAX_POINTS_Y - 1); #endif for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) { @@ -76,11 +78,11 @@ void GcodeSuite::M420() { ExtUI::onMeshUpdate(x, y, Z_VALUES(x, y)); #endif } - SERIAL_ECHOPGM("Simulated " STRINGIFY(GRID_MAX_POINTS_X) "x" STRINGIFY(GRID_MAX_POINTS_X) " mesh "); - SERIAL_ECHOPAIR(" (", MIN_PROBE_X); - SERIAL_CHAR(','); SERIAL_ECHO(MIN_PROBE_Y); - SERIAL_ECHOPAIR(")-(", MAX_PROBE_X); - SERIAL_CHAR(','); SERIAL_ECHO(MAX_PROBE_Y); + SERIAL_ECHOPGM("Simulated " STRINGIFY(GRID_MAX_POINTS_X) "x" STRINGIFY(GRID_MAX_POINTS_Y) " mesh "); + SERIAL_ECHOPAIR(" (", x_min); + SERIAL_CHAR(','); SERIAL_ECHO(y_min); + SERIAL_ECHOPAIR(")-(", x_max); + SERIAL_CHAR(','); SERIAL_ECHO(y_max); SERIAL_ECHOLNPGM(")"); } #endif diff --git a/Marlin/src/gcode/bedlevel/abl/G29.cpp b/Marlin/src/gcode/bedlevel/abl/G29.cpp index b942654a3..372ba5b37 100644 --- a/Marlin/src/gcode/bedlevel/abl/G29.cpp +++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp @@ -393,16 +393,16 @@ G29_TYPE GcodeSuite::G29() { if (parser.seen('H')) { const int16_t size = (int16_t)parser.value_linear_units(); - left_probe_bed_position = _MAX(X_CENTER - size / 2, MIN_PROBE_X); - right_probe_bed_position = _MIN(left_probe_bed_position + size, MAX_PROBE_X); - front_probe_bed_position = _MAX(Y_CENTER - size / 2, MIN_PROBE_Y); - back_probe_bed_position = _MIN(front_probe_bed_position + size, MAX_PROBE_Y); + left_probe_bed_position = _MAX(X_CENTER - size / 2, probe_min_x()); + right_probe_bed_position = _MIN(left_probe_bed_position + size, probe_max_x()); + front_probe_bed_position = _MAX(Y_CENTER - size / 2, probe_min_y()); + back_probe_bed_position = _MIN(front_probe_bed_position + size, probe_max_y()); } else { - left_probe_bed_position = parser.seenval('L') ? (int)RAW_X_POSITION(parser.value_linear_units()) : LEFT_PROBE_BED_POSITION; - right_probe_bed_position = parser.seenval('R') ? (int)RAW_X_POSITION(parser.value_linear_units()) : RIGHT_PROBE_BED_POSITION; - front_probe_bed_position = parser.seenval('F') ? (int)RAW_Y_POSITION(parser.value_linear_units()) : FRONT_PROBE_BED_POSITION; - back_probe_bed_position = parser.seenval('B') ? (int)RAW_Y_POSITION(parser.value_linear_units()) : BACK_PROBE_BED_POSITION; + left_probe_bed_position = parser.seenval('L') ? (int)RAW_X_POSITION(parser.value_linear_units()) : _MAX(X_CENTER - X_BED_SIZE / 2, probe_min_x()); + right_probe_bed_position = parser.seenval('R') ? (int)RAW_X_POSITION(parser.value_linear_units()) : _MIN(left_probe_bed_position + X_BED_SIZE, probe_max_x()); + front_probe_bed_position = parser.seenval('F') ? (int)RAW_Y_POSITION(parser.value_linear_units()) : _MAX(Y_CENTER - Y_BED_SIZE / 2, probe_min_y()); + back_probe_bed_position = parser.seenval('B') ? (int)RAW_Y_POSITION(parser.value_linear_units()) : _MIN(front_probe_bed_position + Y_BED_SIZE, probe_max_y()); } if ( @@ -947,8 +947,8 @@ G29_TYPE GcodeSuite::G29() { planner.leveling_active = false; // Use the last measured distance to the bed, if possible - if ( NEAR(current_position[X_AXIS], xProbe - (X_PROBE_OFFSET_FROM_EXTRUDER)) - && NEAR(current_position[Y_AXIS], yProbe - (Y_PROBE_OFFSET_FROM_EXTRUDER)) + if ( NEAR(current_position[X_AXIS], xProbe - zprobe_offset[X_AXIS]) + && NEAR(current_position[Y_AXIS], yProbe - zprobe_offset[Y_AXIS]) ) { const float simple_z = current_position[Z_AXIS] - measured_z; if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Probed Z", simple_z, " Matrix Z", converted[Z_AXIS], " Discrepancy ", simple_z - converted[Z_AXIS]); diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp index aad4c4093..a9b1c2520 100644 --- a/Marlin/src/gcode/calibrate/G28.cpp +++ b/Marlin/src/gcode/calibrate/G28.cpp @@ -136,8 +136,8 @@ destination[Z_AXIS] = current_position[Z_AXIS]; // Z is already at the right height #if HOMING_Z_WITH_PROBE - destination[X_AXIS] -= X_PROBE_OFFSET_FROM_EXTRUDER; - destination[Y_AXIS] -= Y_PROBE_OFFSET_FROM_EXTRUDER; + destination[X_AXIS] -= zprobe_offset[X_AXIS]; + destination[Y_AXIS] -= zprobe_offset[Y_AXIS]; #endif if (position_is_reachable(destination[X_AXIS], destination[Y_AXIS])) { diff --git a/Marlin/src/gcode/calibrate/M48.cpp b/Marlin/src/gcode/calibrate/M48.cpp index 4557a9416..e9bdd2abe 100644 --- a/Marlin/src/gcode/calibrate/M48.cpp +++ b/Marlin/src/gcode/calibrate/M48.cpp @@ -77,8 +77,8 @@ void GcodeSuite::M48() { float X_current = current_position[X_AXIS], Y_current = current_position[Y_AXIS]; - const float X_probe_location = parser.linearval('X', X_current + X_PROBE_OFFSET_FROM_EXTRUDER), - Y_probe_location = parser.linearval('Y', Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER); + const float X_probe_location = parser.linearval('X', X_current + zprobe_offset[X_AXIS]), + Y_probe_location = parser.linearval('Y', Y_current + zprobe_offset[Y_AXIS]); if (!position_is_reachable_by_probe(X_probe_location, Y_probe_location)) { SERIAL_ECHOLNPGM("? (X,Y) out of bounds."); @@ -165,8 +165,8 @@ void GcodeSuite::M48() { while (angle < 0.0) angle += 360.0; // outside of this range. It looks like they behave correctly with // numbers outside of the range, but just to be safe we clamp them. - X_current = X_probe_location - (X_PROBE_OFFSET_FROM_EXTRUDER) + cos(RADIANS(angle)) * radius; - Y_current = Y_probe_location - (Y_PROBE_OFFSET_FROM_EXTRUDER) + sin(RADIANS(angle)) * radius; + X_current = X_probe_location - zprobe_offset[X_AXIS] + cos(RADIANS(angle)) * radius; + Y_current = Y_probe_location - zprobe_offset[Y_AXIS] + sin(RADIANS(angle)) * radius; #if DISABLED(DELTA) LIMIT(X_current, X_MIN_POS, X_MAX_POS); diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index 2d8db7ebd..2282da57a 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -229,7 +229,7 @@ * M701 - Load filament (Requires FILAMENT_LOAD_UNLOAD_GCODES) * M702 - Unload filament (Requires FILAMENT_LOAD_UNLOAD_GCODES) * M810-M819 - Define/execute a G-code macro (Requires GCODE_MACROS) - * M851 - Set Z probe's Z offset in current units. (Negative = below the nozzle.) + * M851 - Set Z probe's XYZ offsets in current units. (Negative values: X=left, Y=front, Z=below) * M852 - Set skew factors: "M852 [I] [J] [K]". (Requires SKEW_CORRECTION_GCODE, and SKEW_CORRECTION_FOR_Z for IJ) * M860 - Report the position of position encoder modules. * M861 - Report the status of position encoder modules. diff --git a/Marlin/src/gcode/motion/M290.cpp b/Marlin/src/gcode/motion/M290.cpp index d3eb81a8f..7a1082f79 100644 --- a/Marlin/src/gcode/motion/M290.cpp +++ b/Marlin/src/gcode/motion/M290.cpp @@ -42,9 +42,9 @@ && active_extruder == 0 #endif ) { - zprobe_zoffset += offs; + zprobe_offset[Z_AXIS] += offs; SERIAL_ECHO_START(); - SERIAL_ECHOLNPAIR(MSG_PROBE_Z_OFFSET ": ", zprobe_zoffset); + SERIAL_ECHOLNPAIR(MSG_PROBE_OFFSET MSG_Z ": ", zprobe_offset[Z_AXIS]); } #if ENABLED(BABYSTEP_HOTEND_Z_OFFSET) else { diff --git a/Marlin/src/gcode/probe/G30.cpp b/Marlin/src/gcode/probe/G30.cpp index b4525772c..26bb3876d 100644 --- a/Marlin/src/gcode/probe/G30.cpp +++ b/Marlin/src/gcode/probe/G30.cpp @@ -39,8 +39,8 @@ * E Engage the probe for each probe (default 1) */ void GcodeSuite::G30() { - const float xpos = parser.linearval('X', current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER), - ypos = parser.linearval('Y', current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER); + const float xpos = parser.linearval('X', current_position[X_AXIS] + zprobe_offset[X_AXIS]), + ypos = parser.linearval('Y', current_position[Y_AXIS] + zprobe_offset[Y_AXIS]); if (!position_is_reachable_by_probe(xpos, ypos)) return; diff --git a/Marlin/src/gcode/probe/M851.cpp b/Marlin/src/gcode/probe/M851.cpp index 6ab53f9f7..326f327ff 100644 --- a/Marlin/src/gcode/probe/M851.cpp +++ b/Marlin/src/gcode/probe/M851.cpp @@ -28,17 +28,43 @@ #include "../../feature/bedlevel/bedlevel.h" #include "../../module/probe.h" +/** + * M851: Set the nozzle-to-probe offsets in current units + */ void GcodeSuite::M851() { - if (parser.seenval('Z')) { - const float value = parser.value_linear_units(); - if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) - zprobe_zoffset = value; - else - SERIAL_ERROR_MSG("?Z out of range (" STRINGIFY(Z_PROBE_OFFSET_RANGE_MIN) " to " STRINGIFY(Z_PROBE_OFFSET_RANGE_MAX) ")"); + + // Show usage with no parameters + if (!parser.seen("XYZ")) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR(MSG_PROBE_OFFSET " X", zprobe_offset[X_AXIS], + " Y", zprobe_offset[Y_AXIS], + " Z", zprobe_offset[Z_AXIS]); + return; + } + + // Get the modified offsets + const float offs[] = { + parser.floatval('X', zprobe_offset[X_AXIS]), + parser.floatval('Y', zprobe_offset[Y_AXIS]), + parser.floatval('Z', zprobe_offset[Z_AXIS]) + }; + + // Error-check + if (!WITHIN(offs[X_AXIS], -(X_BED_SIZE), X_BED_SIZE)) { + SERIAL_ERROR_MSG("?X out of range (-" STRINGIFY(X_BED_SIZE) " to " STRINGIFY(X_BED_SIZE) ")"); + return; + } + if (!WITHIN(offs[Y_AXIS], -(Y_BED_SIZE), Y_BED_SIZE)) { + SERIAL_ERROR_MSG("?Y out of range (-" STRINGIFY(Y_BED_SIZE) " to " STRINGIFY(Y_BED_SIZE) ")"); return; } - SERIAL_ECHO_START(); - SERIAL_ECHOLNPAIR(MSG_PROBE_Z_OFFSET ": ", zprobe_zoffset); + if (!WITHIN(offs[Z_AXIS], Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) { + SERIAL_ERROR_MSG("?Z out of range (" STRINGIFY(Z_PROBE_OFFSET_RANGE_MIN) " to " STRINGIFY(Z_PROBE_OFFSET_RANGE_MAX) ")"); + return; + } + + // Save the new offsets + LOOP_XYZ(a) zprobe_offset[a] = offs[a]; } #endif // HAS_BED_PROBE diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index e9a4f1f38..fb7691495 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -1348,12 +1348,7 @@ #endif #endif #else - #undef X_PROBE_OFFSET_FROM_EXTRUDER - #undef Y_PROBE_OFFSET_FROM_EXTRUDER - #undef Z_PROBE_OFFSET_FROM_EXTRUDER - #define X_PROBE_OFFSET_FROM_EXTRUDER 0 - #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 - #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 + #undef NOZZLE_TO_PROBE_OFFSET #endif /** @@ -1446,10 +1441,13 @@ * Bed Probing rectangular bounds * These can be further constrained in code for Delta and SCARA */ - #ifndef MIN_PROBE_EDGE #define MIN_PROBE_EDGE 0 #endif +#ifndef NOZZLE_TO_PROBE_OFFSET + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#endif +constexpr float nozzle_to_probe_offset[XYZ] = NOZZLE_TO_PROBE_OFFSET; #if ENABLED(DELTA) /** @@ -1457,8 +1455,8 @@ */ #define _PROBE_RADIUS (DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) #ifndef DELTA_CALIBRATION_RADIUS - #ifdef X_PROBE_OFFSET_FROM_EXTRUDER - #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - _MAX(ABS(X_PROBE_OFFSET_FROM_EXTRUDER), ABS(Y_PROBE_OFFSET_FROM_EXTRUDER), ABS(MIN_PROBE_EDGE))) + #ifdef NOZZLE_TO_PROBE_OFFSET + #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - _MAX(ABS(nozzle_to_probe_offset[X_AXIS]), ABS(nozzle_to_probe_offset[Y_AXIS]), ABS(MIN_PROBE_EDGE))) #else #define DELTA_CALIBRATION_RADIUS _PROBE_RADIUS #endif @@ -1467,39 +1465,39 @@ #define DELTA_ENDSTOP_ADJ { 0, 0, 0 } #endif #ifndef DELTA_TOWER_ANGLE_TRIM - #define DELTA_TOWER_ANGLE_TRIM {0, 0, 0} + #define DELTA_TOWER_ANGLE_TRIM { 0, 0, 0 } #endif #ifndef DELTA_RADIUS_TRIM_TOWER - #define DELTA_RADIUS_TRIM_TOWER {0, 0, 0} + #define DELTA_RADIUS_TRIM_TOWER { 0, 0, 0 } #endif #ifndef DELTA_DIAGONAL_ROD_TRIM_TOWER - #define DELTA_DIAGONAL_ROD_TRIM_TOWER {0, 0, 0} + #define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0, 0, 0 } #endif // Probing points may be verified at compile time within the radius // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") // so that may be added to SanityCheck.h in the future. - #define _MIN_PROBE_X (X_CENTER - (_PROBE_RADIUS)) - #define _MIN_PROBE_Y (Y_CENTER - (_PROBE_RADIUS)) - #define _MAX_PROBE_X (X_CENTER + _PROBE_RADIUS) - #define _MAX_PROBE_Y (Y_CENTER + _PROBE_RADIUS) + #define PROBE_X_MIN (X_CENTER - (_PROBE_RADIUS)) + #define PROBE_Y_MIN (Y_CENTER - (_PROBE_RADIUS)) + #define PROBE_X_MAX (X_CENTER + _PROBE_RADIUS) + #define PROBE_Y_MAX (Y_CENTER + _PROBE_RADIUS) #elif IS_SCARA #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #define _PROBE_RADIUS (SCARA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - #define _MIN_PROBE_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MIN_PROBE_EDGE) - #define _MIN_PROBE_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MIN_PROBE_EDGE) - #define _MAX_PROBE_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - #define _MAX_PROBE_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) + #define PROBE_X_MIN (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MIN_PROBE_EDGE) + #define PROBE_Y_MIN (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MIN_PROBE_EDGE) + #define PROBE_X_MAX (X_CENTER + SCARA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) + #define PROBE_Y_MAX (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) #else // Boundaries for Cartesian probing based on bed limits - #define _MIN_PROBE_X (_MAX(X_MIN_BED + MIN_PROBE_EDGE, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) - #define _MIN_PROBE_Y (_MAX(Y_MIN_BED + MIN_PROBE_EDGE, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) - #define _MAX_PROBE_X (_MIN(X_MAX_BED - (MIN_PROBE_EDGE), X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) - #define _MAX_PROBE_Y (_MIN(Y_MAX_BED - (MIN_PROBE_EDGE), Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #define PROBE_X_MIN (_MAX(X_MIN_BED + MIN_PROBE_EDGE, X_MIN_POS + nozzle_to_probe_offset[X_AXIS])) + #define PROBE_Y_MIN (_MAX(Y_MIN_BED + MIN_PROBE_EDGE, Y_MIN_POS + nozzle_to_probe_offset[Y_AXIS])) + #define PROBE_X_MAX (_MIN(X_MAX_BED - (MIN_PROBE_EDGE), X_MAX_POS + nozzle_to_probe_offset[X_AXIS])) + #define PROBE_Y_MAX (_MIN(Y_MAX_BED - (MIN_PROBE_EDGE), Y_MAX_POS + nozzle_to_probe_offset[Y_AXIS])) #endif @@ -1507,20 +1505,6 @@ #define LEVELED_SEGMENT_LENGTH 5 #endif -// These may be overridden in Configuration.h if a smaller area is desired -#ifndef MIN_PROBE_X - #define MIN_PROBE_X _MIN_PROBE_X -#endif -#ifndef MIN_PROBE_Y - #define MIN_PROBE_Y _MIN_PROBE_Y -#endif -#ifndef MAX_PROBE_X - #define MAX_PROBE_X _MAX_PROBE_X -#endif -#ifndef MAX_PROBE_Y - #define MAX_PROBE_Y _MAX_PROBE_Y -#endif - /** * Default mesh area is an area with an inset margin on the print area. */ @@ -1537,14 +1521,14 @@ // Boundaries for Cartesian probing based on set limits #if ENABLED(AUTO_BED_LEVELING_UBL) #define _MESH_MIN_X (_MAX(X_MIN_BED + MESH_INSET, X_MIN_POS)) // UBL is careful not to probe off the bed. It does not - #define _MESH_MIN_Y (_MAX(Y_MIN_BED + MESH_INSET, Y_MIN_POS)) // need *_PROBE_OFFSET_FROM_EXTRUDER in the mesh dimensions + #define _MESH_MIN_Y (_MAX(Y_MIN_BED + MESH_INSET, Y_MIN_POS)) // need NOZZLE_TO_PROBE_OFFSET in the mesh dimensions #define _MESH_MAX_X (_MIN(X_MAX_BED - (MESH_INSET), X_MAX_POS)) #define _MESH_MAX_Y (_MIN(Y_MAX_BED - (MESH_INSET), Y_MAX_POS)) #else - #define _MESH_MIN_X (_MAX(X_MIN_BED + MESH_INSET, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) - #define _MESH_MIN_Y (_MAX(Y_MIN_BED + MESH_INSET, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) - #define _MESH_MAX_X (_MIN(X_MAX_BED - (MESH_INSET), X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) - #define _MESH_MAX_Y (_MIN(Y_MAX_BED - (MESH_INSET), Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #define _MESH_MIN_X (_MAX(X_MIN_BED + MESH_INSET, X_MIN_POS + nozzle_to_probe_offset[X_AXIS])) + #define _MESH_MIN_Y (_MAX(Y_MIN_BED + MESH_INSET, Y_MIN_POS + nozzle_to_probe_offset[Y_AXIS])) + #define _MESH_MAX_X (_MIN(X_MAX_BED - (MESH_INSET), X_MAX_POS + nozzle_to_probe_offset[X_AXIS])) + #define _MESH_MAX_Y (_MIN(Y_MAX_BED - (MESH_INSET), Y_MAX_POS + nozzle_to_probe_offset[Y_AXIS])) #endif #endif @@ -1592,41 +1576,26 @@ #endif #else #ifndef PROBE_PT_1_X - #define PROBE_PT_1_X MIN_PROBE_X + #define PROBE_PT_1_X PROBE_X_MIN #endif #ifndef PROBE_PT_1_Y - #define PROBE_PT_1_Y MIN_PROBE_Y + #define PROBE_PT_1_Y PROBE_Y_MIN #endif #ifndef PROBE_PT_2_X - #define PROBE_PT_2_X MAX_PROBE_X + #define PROBE_PT_2_X PROBE_X_MAX #endif #ifndef PROBE_PT_2_Y - #define PROBE_PT_2_Y MIN_PROBE_Y + #define PROBE_PT_2_Y PROBE_Y_MIN #endif #ifndef PROBE_PT_3_X #define PROBE_PT_3_X X_CENTER #endif #ifndef PROBE_PT_3_Y - #define PROBE_PT_3_Y MAX_PROBE_Y + #define PROBE_PT_3_Y PROBE_Y_MAX #endif #endif #endif -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - #ifndef LEFT_PROBE_BED_POSITION - #define LEFT_PROBE_BED_POSITION MIN_PROBE_X - #endif - #ifndef RIGHT_PROBE_BED_POSITION - #define RIGHT_PROBE_BED_POSITION MAX_PROBE_X - #endif - #ifndef FRONT_PROBE_BED_POSITION - #define FRONT_PROBE_BED_POSITION MIN_PROBE_Y - #endif - #ifndef BACK_PROBE_BED_POSITION - #define BACK_PROBE_BED_POSITION MAX_PROBE_Y - #endif -#endif - /** * Buzzer/Speaker */ diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 4b59f641c..02d3b5ad8 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -390,6 +390,10 @@ #error "STRING_SPLASH_LINE[12] are now obsolete. Please remove them from Configuration.h." #elif defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_X) || defined(Z_PROBE_ALLEN_KEY_STOW_1_X) #error "Z_PROBE_ALLEN_KEY_(DEPLOY|STOW) coordinates are now a single setting. Please update your configuration." +#elif defined(X_PROBE_OFFSET_FROM_EXTRUDER) || defined(Y_PROBE_OFFSET_FROM_EXTRUDER) || defined(Z_PROBE_OFFSET_FROM_EXTRUDER) + #error "[XYZ]_PROBE_OFFSET_FROM_EXTRUDER is now NOZZLE_TO_PROBE_OFFSET. Please update your configuration." +#elif defined(MIN_PROBE_X) || defined(MIN_PROBE_Y) || defined(MAX_PROBE_X) || defined(MAX_PROBE_Y) + #error "(MIN|MAX)_PROBE_[XY] are now calculated at runtime. Please remove them from Configuration.h." #endif #define BOARD_MKS_13 -1000 @@ -1051,9 +1055,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #if HAS_BED_PROBE - static_assert(FLOOR(float(X_PROBE_OFFSET_FROM_EXTRUDER)) == float(X_PROBE_OFFSET_FROM_EXTRUDER), "X_PROBE_OFFSET_FROM_EXTRUDER must be an integer!"); - static_assert(FLOOR(float(Y_PROBE_OFFSET_FROM_EXTRUDER)) == float(Y_PROBE_OFFSET_FROM_EXTRUDER), "Y_PROBE_OFFSET_FROM_EXTRUDER must be an integer!"); - /** * Z_PROBE_SLED is incompatible with DELTA */ @@ -1205,14 +1206,18 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS * Bed Leveling Requirements */ -#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT) - static_assert(WITHIN(PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_1_X is outside the probe region."); - static_assert(WITHIN(PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_2_X is outside the probe region."); - static_assert(WITHIN(PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_3_X is outside the probe region."); - static_assert(WITHIN(PROBE_PT_1_Y, MIN_PROBE_Y, MAX_PROBE_Y), "PROBE_PT_1_Y is outside the probe region."); - static_assert(WITHIN(PROBE_PT_2_Y, MIN_PROBE_Y, MAX_PROBE_Y), "PROBE_PT_2_Y is outside the probe region."); - static_assert(WITHIN(PROBE_PT_3_Y, MIN_PROBE_Y, MAX_PROBE_Y), "PROBE_PT_3_Y is outside the probe region."); -#endif +// +// !! TODO: REPLACE WITH TESTS IN THE 3-POINT LEVELING CODE !! +// + +//#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT) +// static_assert(WITHIN(PROBE_PT_1_X, PROBE_X_MIN, PROBE_X_MAX), "PROBE_PT_1_X is outside the probe region."); +// static_assert(WITHIN(PROBE_PT_2_X, PROBE_X_MIN, PROBE_X_MAX), "PROBE_PT_2_X is outside the probe region."); +// static_assert(WITHIN(PROBE_PT_3_X, PROBE_X_MIN, PROBE_X_MAX), "PROBE_PT_3_X is outside the probe region."); +// static_assert(WITHIN(PROBE_PT_1_Y, PROBE_Y_MIN, PROBE_Y_MAX), "PROBE_PT_1_Y is outside the probe region."); +// static_assert(WITHIN(PROBE_PT_2_Y, PROBE_Y_MIN, PROBE_Y_MAX), "PROBE_PT_2_Y is outside the probe region."); +// static_assert(WITHIN(PROBE_PT_3_Y, PROBE_Y_MIN, PROBE_Y_MAX), "PROBE_PT_3_Y is outside the probe region."); +//#endif #if ENABLED(AUTO_BED_LEVELING_UBL) @@ -1246,20 +1251,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "SCARA machines can only use the AUTO_BED_LEVELING_BILINEAR leveling option." #endif - /** - * Check auto bed leveling probe points - */ - #if ABL_GRID - - static_assert(LEFT_PROBE_BED_POSITION < RIGHT_PROBE_BED_POSITION, "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION."); - static_assert(FRONT_PROBE_BED_POSITION < BACK_PROBE_BED_POSITION, "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION."); - static_assert(LEFT_PROBE_BED_POSITION >= MIN_PROBE_X, "LEFT_PROBE_BED_POSITION is outside the probe region."); - static_assert(RIGHT_PROBE_BED_POSITION <= MAX_PROBE_X, "RIGHT_PROBE_BED_POSITION is outside the probe region."); - static_assert(FRONT_PROBE_BED_POSITION >= MIN_PROBE_Y, "FRONT_PROBE_BED_POSITION is outside the probe region."); - static_assert(BACK_PROBE_BED_POSITION <= MAX_PROBE_Y, "BACK_PROBE_BED_POSITION is outside the probe region."); - - #endif - #elif ENABLED(MESH_BED_LEVELING) // Hide PROBE_MANUALLY from the rest of the code @@ -1328,8 +1319,11 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS */ #if ENABLED(Z_SAFE_HOMING) #if HAS_BED_PROBE - static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, MIN_PROBE_X, MAX_PROBE_X), "Z_SAFE_HOMING_X_POINT is outside the probe region."); - static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, MIN_PROBE_Y, MAX_PROBE_Y), "Z_SAFE_HOMING_Y_POINT is outside the probe region."); + // + // !! TODO: REPLACE WITH TESTS IN THE Z_SAFE_HOMING CODE !! + // + //static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, PROBE_X_MIN, PROBE_X_MAX), "Z_SAFE_HOMING_X_POINT is outside the probe region."); + //static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, PROBE_Y_MIN, PROBE_Y_MAX), "Z_SAFE_HOMING_Y_POINT is outside the probe region."); #else static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_POS, X_MAX_POS), "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle."); static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_POS, Y_MAX_POS), "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle."); diff --git a/Marlin/src/lcd/extensible_ui/ui_api.cpp b/Marlin/src/lcd/extensible_ui/ui_api.cpp index 28b2ec006..68b8aad52 100644 --- a/Marlin/src/lcd/extensible_ui/ui_api.cpp +++ b/Marlin/src/lcd/extensible_ui/ui_api.cpp @@ -708,7 +708,7 @@ namespace ExtUI { #if EXTRUDERS > 1 && (linked_nozzles || active_extruder == 0) #endif - ) zprobe_zoffset += mm; + ) zprobe_offset[Z_AXIS] += mm; #else UNUSED(mm); #endif @@ -746,7 +746,7 @@ namespace ExtUI { float getZOffset_mm() { #if HAS_BED_PROBE - return zprobe_zoffset; + return zprobe_offset[Z_AXIS]; #elif ENABLED(BABYSTEP_DISPLAY_TOTAL) return babystep.axis_total[BS_TOTAL_AXIS(Z_AXIS) + 1]; #else @@ -757,7 +757,7 @@ namespace ExtUI { void setZOffset_mm(const float value) { #if HAS_BED_PROBE if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) - zprobe_zoffset = value; + zprobe_offset[Z_AXIS] = value; #elif ENABLED(BABYSTEP_DISPLAY_TOTAL) babystep.add_mm(Z_AXIS, (value - babystep.axis_total[BS_TOTAL_AXIS(Z_AXIS) + 1])); #else diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp index 5590ef714..800b4f03d 100644 --- a/Marlin/src/lcd/menu/menu.cpp +++ b/Marlin/src/lcd/menu/menu.cpp @@ -402,7 +402,7 @@ void scroll_screen(const uint8_t limit, const bool is_menu) { ui.encoderPosition = 0; const float diff = planner.steps_to_mm[Z_AXIS] * babystep_increment, - new_probe_offset = zprobe_zoffset + diff, + new_probe_offset = zprobe_offset[Z_AXIS] + diff, new_offs = #if ENABLED(BABYSTEP_HOTEND_Z_OFFSET) do_probe ? new_probe_offset : hotend_offset[Z_AXIS][active_extruder] - diff @@ -414,7 +414,7 @@ void scroll_screen(const uint8_t limit, const bool is_menu) { babystep.add_steps(Z_AXIS, babystep_increment); - if (do_probe) zprobe_zoffset = new_offs; + if (do_probe) zprobe_offset[Z_AXIS] = new_offs; #if ENABLED(BABYSTEP_HOTEND_Z_OFFSET) else hotend_offset[Z_AXIS][active_extruder] = new_offs; #endif @@ -428,10 +428,10 @@ void scroll_screen(const uint8_t limit, const bool is_menu) { draw_edit_screen(PSTR(MSG_Z_OFFSET), ftostr43sign(hotend_offset[Z_AXIS][active_extruder])); else #endif - draw_edit_screen(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(zprobe_zoffset)); + draw_edit_screen(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(zprobe_offset[Z_AXIS])); #if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) - if (do_probe) _lcd_zoffset_overlay_gfx(zprobe_zoffset); + if (do_probe) _lcd_zoffset_overlay_gfx(zprobe_offset[Z_AXIS]); #endif } } diff --git a/Marlin/src/lcd/menu/menu_bed_corners.cpp b/Marlin/src/lcd/menu/menu_bed_corners.cpp index a559a6852..07629b717 100644 --- a/Marlin/src/lcd/menu/menu_bed_corners.cpp +++ b/Marlin/src/lcd/menu/menu_bed_corners.cpp @@ -62,10 +62,10 @@ static inline void _lcd_goto_next_corner() { current_position[Y_AXIS] = Y_MIN_BED + LEVEL_CORNERS_INSET; break; case 1: - current_position[X_AXIS] = X_MAX_BED - LEVEL_CORNERS_INSET; + current_position[X_AXIS] = X_MAX_BED - (LEVEL_CORNERS_INSET); break; case 2: - current_position[Y_AXIS] = Y_MAX_BED - LEVEL_CORNERS_INSET; + current_position[Y_AXIS] = Y_MAX_BED - (LEVEL_CORNERS_INSET); break; case 3: current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET; diff --git a/Marlin/src/lcd/menu/menu_bed_leveling.cpp b/Marlin/src/lcd/menu/menu_bed_leveling.cpp index 3f1f746af..33073fc81 100644 --- a/Marlin/src/lcd/menu/menu_bed_leveling.cpp +++ b/Marlin/src/lcd/menu/menu_bed_leveling.cpp @@ -279,7 +279,7 @@ void menu_bed_leveling() { #if ENABLED(BABYSTEP_ZPROBE_OFFSET) MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); #elif HAS_BED_PROBE - MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); + MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &zprobe_offset[Z_AXIS], Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); #endif #if ENABLED(LEVEL_BED_CORNERS) diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp index 0bc3963f2..89fedeefc 100644 --- a/Marlin/src/lcd/menu/menu_configuration.cpp +++ b/Marlin/src/lcd/menu/menu_configuration.cpp @@ -347,7 +347,7 @@ void menu_configuration() { #if ENABLED(BABYSTEP_ZPROBE_OFFSET) MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); #elif HAS_BED_PROBE - MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); + MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &zprobe_offset[Z_AXIS], Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); #endif const bool busy = printer_busy(); diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index b00f62f2c..6b7f7ab95 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -37,7 +37,7 @@ */ // Change EEPROM version if the structure changes -#define EEPROM_VERSION "V69" +#define EEPROM_VERSION "V70" #define EEPROM_OFFSET 100 // Check the integrity of data offsets. @@ -60,6 +60,8 @@ #include "../HAL/shared/persistent_store_api.h" #endif +#include "probe.h" + #if HAS_LEVELING #include "../feature/bedlevel/bedlevel.h" #endif @@ -78,10 +80,6 @@ #define EEPROM_NUM_SERVOS NUM_SERVO_PLUGS #endif -#if HAS_BED_PROBE - #include "probe.h" -#endif - #include "../feature/fwretract.h" #if ENABLED(POWER_LOSS_RECOVERY) @@ -178,7 +176,7 @@ typedef struct SettingsDataStruct { // HAS_BED_PROBE // - float zprobe_zoffset; + float zprobe_offset[XYZ]; // // ABL_PLANAR @@ -615,12 +613,8 @@ void MarlinSettings::postprocess() { // Probe Z Offset // { - _FIELD_TEST(zprobe_zoffset); - - #if !HAS_BED_PROBE - const float zprobe_zoffset = 0; - #endif - EEPROM_WRITE(zprobe_zoffset); + _FIELD_TEST(zprobe_offset[Z_AXIS]); + EEPROM_WRITE(zprobe_offset); } // @@ -1421,12 +1415,14 @@ void MarlinSettings::postprocess() { // Probe Z Offset // { - _FIELD_TEST(zprobe_zoffset); + _FIELD_TEST(zprobe_offset[Z_AXIS]); - #if !HAS_BED_PROBE - float zprobe_zoffset; + #if HAS_BED_PROBE + float (&zpo)[XYZ] = zprobe_offset; + #else + float zpo[XYZ]; #endif - EEPROM_READ(zprobe_zoffset); + EEPROM_READ(zpo); } // @@ -2321,7 +2317,12 @@ void MarlinSettings::reset() { #endif #if HAS_BED_PROBE - zprobe_zoffset = Z_PROBE_OFFSET_FROM_EXTRUDER; + #ifndef NOZZLE_TO_PROBE_OFFSET + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } + #endif + constexpr float dpo[XYZ] = NOZZLE_TO_PROBE_OFFSET; + static_assert(COUNT(dpo) == 3, "NOZZLE_TO_PROBE_OFFSET must contain offsets for X, Y, and Z."); + LOOP_XYZ(a) zprobe_offset[a] = dpo[a]; #endif // @@ -3070,7 +3071,9 @@ void MarlinSettings::reset() { say_units(true); } CONFIG_ECHO_START(); - SERIAL_ECHOLNPAIR(" M851 Z", LINEAR_UNIT(zprobe_zoffset)); + SERIAL_ECHOLNPAIR(" M851 X", LINEAR_UNIT(zprobe_offset[X_AXIS]), + " Y", LINEAR_UNIT(zprobe_offset[Y_AXIS]), + " Z", LINEAR_UNIT(zprobe_offset[Z_AXIS])); #endif /** diff --git a/Marlin/src/module/delta.cpp b/Marlin/src/module/delta.cpp index 186b5adf3..c9d942f1b 100644 --- a/Marlin/src/module/delta.cpp +++ b/Marlin/src/module/delta.cpp @@ -233,7 +233,7 @@ void home_delta() { // Move all carriages together linearly until an endstop is hit. destination[Z_AXIS] = (delta_height #if HAS_BED_PROBE - - zprobe_zoffset + - zprobe_offset[Z_AXIS] #endif + 10); buffer_line_to_destination(homing_feedrate(X_AXIS)); diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp index 203194411..3867fb9c7 100644 --- a/Marlin/src/module/motion.cpp +++ b/Marlin/src/module/motion.cpp @@ -505,7 +505,7 @@ void restore_feedrate_and_scaling() { soft_endstop[axis].min = base_min_pos(axis); soft_endstop[axis].max = (axis == Z_AXIS ? delta_height #if HAS_BED_PROBE - - zprobe_zoffset + - zprobe_offset[Z_AXIS] #endif : base_max_pos(axis)); @@ -1340,7 +1340,7 @@ void set_axis_is_at_home(const AxisEnum axis) { #elif ENABLED(DELTA) current_position[axis] = (axis == Z_AXIS ? delta_height #if HAS_BED_PROBE - - zprobe_zoffset + - zprobe_offset[Z_AXIS] #endif : base_home_pos(axis)); #else @@ -1354,9 +1354,9 @@ void set_axis_is_at_home(const AxisEnum axis) { if (axis == Z_AXIS) { #if HOMING_Z_WITH_PROBE - current_position[Z_AXIS] -= zprobe_zoffset; + current_position[Z_AXIS] -= zprobe_offset[Z_AXIS]; - if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("*** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***\n> zprobe_zoffset = ", zprobe_zoffset); + if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("*** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***\n> zprobe_offset[Z_AXIS] = ", zprobe_offset[Z_AXIS]); #else diff --git a/Marlin/src/module/motion.h b/Marlin/src/module/motion.h index ba1ac07f7..86fccc25c 100644 --- a/Marlin/src/module/motion.h +++ b/Marlin/src/module/motion.h @@ -30,14 +30,14 @@ #include "../inc/MarlinConfig.h" -#if IS_SCARA - #include "scara.h" -#endif - #if HAS_BED_PROBE #include "probe.h" #endif +#if IS_SCARA + #include "scara.h" +#endif + // Axis homed and known-position states extern uint8_t axis_homed, axis_known_position; constexpr uint8_t xyz_bits = _BV(X_AXIS) | _BV(Y_AXIS) | _BV(Z_AXIS); @@ -284,7 +284,7 @@ void homeaxis(const AxisEnum axis); // Return true if the both nozzle and the probe can reach the given point. // Note: This won't work on SCARA since the probe offset rotates with the arm. inline bool position_is_reachable_by_probe(const float &rx, const float &ry) { - return position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER)) + return position_is_reachable(rx - zprobe_offset[X_AXIS], ry - zprobe_offset[Y_AXIS]) && position_is_reachable(rx, ry, ABS(MIN_PROBE_EDGE)); } #endif @@ -313,9 +313,9 @@ void homeaxis(const AxisEnum axis); * nozzle must be be able to reach +10,-10. */ inline bool position_is_reachable_by_probe(const float &rx, const float &ry) { - return position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER)) - && WITHIN(rx, MIN_PROBE_X - slop, MAX_PROBE_X + slop) - && WITHIN(ry, MIN_PROBE_Y - slop, MAX_PROBE_Y + slop); + return position_is_reachable(rx - zprobe_offset[X_AXIS], ry - zprobe_offset[Y_AXIS]) + && WITHIN(rx, probe_min_x() - slop, probe_max_x() + slop) + && WITHIN(ry, probe_min_y() - slop, probe_max_y() + slop); } #endif diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index f47082263..f9cfd26f9 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -56,7 +56,7 @@ #include "../feature/backlash.h" #endif -float zprobe_zoffset; // Initialized by settings.load() +float zprobe_offset[XYZ]; // Initialized by settings.load() #if ENABLED(BLTOUCH) #include "../feature/bltouch.h" @@ -86,6 +86,43 @@ float zprobe_zoffset; // Initialized by settings.load() #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE) #include "../core/debug_out.h" +float probe_min_x() { + return _MAX( + #if ENABLED(DELTA) || IS_SCARA + PROBE_X_MIN, MESH_MIN_X + #else + (X_MIN_BED) + (MIN_PROBE_EDGE), (X_MIN_POS) + zprobe_offset[X_AXIS] + #endif + ); +} +float probe_max_x() { + return _MIN( + #if ENABLED(DELTA) || IS_SCARA + PROBE_X_MAX, MESH_MAX_X + #else + (X_MAX_BED) - (MIN_PROBE_EDGE), (X_MAX_POS) + zprobe_offset[X_AXIS] + #endif + ); +} +float probe_min_y() { + return _MAX( + #if ENABLED(DELTA) || IS_SCARA + PROBE_Y_MIN, MESH_MIN_Y + #else + (Y_MIN_BED) + (MIN_PROBE_EDGE), (Y_MIN_POS) + zprobe_offset[Y_AXIS] + #endif + ); +} +float probe_max_y() { + return _MIN( + #if ENABLED(DELTA) || IS_SCARA + PROBE_Y_MAX, MESH_MAX_Y + #else + (Y_MAX_BED) - (MIN_PROBE_EDGE), (Y_MAX_POS) + zprobe_offset[Y_AXIS] + #endif + ); +} + #if ENABLED(Z_PROBE_SLED) #ifndef SLED_DOCKING_OFFSET @@ -263,7 +300,7 @@ inline void do_probe_raise(const float z_raise) { if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("do_probe_raise(", z_raise, ")"); float z_dest = z_raise; - if (zprobe_zoffset < 0) z_dest -= zprobe_zoffset; + if (zprobe_offset[Z_AXIS] < 0) z_dest -= zprobe_offset[Z_AXIS]; NOMORE(z_dest, Z_MAX_POS); @@ -543,7 +580,7 @@ static float run_z_probe() { // Stop the probe before it goes too low to prevent damage. // If Z isn't known then probe to -10mm. - const float z_probe_low_point = TEST(axis_known_position, Z_AXIS) ? -zprobe_zoffset + Z_PROBE_LOW_POINT : -10.0; + const float z_probe_low_point = TEST(axis_known_position, Z_AXIS) ? -zprobe_offset[Z_AXIS] + Z_PROBE_LOW_POINT : -10.0; // Double-probing does a fast probe followed by a slow probe #if TOTAL_PROBING == 2 @@ -568,7 +605,7 @@ static float run_z_probe() { // If the nozzle is well over the travel height then // move down quickly before doing the slow probe - const float z = Z_CLEARANCE_DEPLOY_PROBE + 5.0 + (zprobe_zoffset < 0 ? -zprobe_zoffset : 0); + const float z = Z_CLEARANCE_DEPLOY_PROBE + 5.0 + (zprobe_offset[Z_AXIS] < 0 ? -zprobe_offset[Z_AXIS] : 0); if (current_position[Z_AXIS] > z) { // Probe down fast. If the probe never triggered, raise for probe clearance if (!do_probe_move(z, MMM_TO_MMS(Z_PROBE_SPEED_FAST))) @@ -698,8 +735,8 @@ float probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_ float nx = rx, ny = ry; if (probe_relative) { if (!position_is_reachable_by_probe(rx, ry)) return NAN; // The given position is in terms of the probe - nx -= (X_PROBE_OFFSET_FROM_EXTRUDER); // Get the nozzle position - ny -= (Y_PROBE_OFFSET_FROM_EXTRUDER); + nx -= zprobe_offset[X_AXIS]; // Get the nozzle position + ny -= zprobe_offset[Y_AXIS]; } else if (!position_is_reachable(nx, ny)) return NAN; // The given position is in terms of the nozzle @@ -720,7 +757,7 @@ float probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_ float measured_z = NAN; if (!DEPLOY_PROBE()) { - measured_z = run_z_probe() + zprobe_zoffset; + measured_z = run_z_probe() + zprobe_offset[Z_AXIS]; const bool big_raise = raise_after == PROBE_PT_BIG_RAISE; if (big_raise || raise_after == PROBE_PT_RAISE) diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h index 361952658..6713b11a6 100644 --- a/Marlin/src/module/probe.h +++ b/Marlin/src/module/probe.h @@ -28,7 +28,8 @@ #include "../inc/MarlinConfig.h" #if HAS_BED_PROBE - extern float zprobe_zoffset; + + extern float zprobe_offset[XYZ]; bool set_probe_deployed(const bool deploy); #ifdef Z_AFTER_PROBING void move_z_after_probing(); @@ -45,9 +46,15 @@ #if HAS_HEATED_BED && ENABLED(WAIT_FOR_BED_HEATER) extern const char msg_wait_for_bed_heating[25]; #endif + + float probe_min_x(), probe_max_x(), probe_min_y(), probe_max_y(); + #else + + constexpr float zprobe_offset[XYZ] = { 0 }; #define DEPLOY_PROBE() #define STOW_PROBE() + #endif #if HAS_Z_SERVO_PROBE diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 6f2716015..5935f9926 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 7a4541251..544e4f3de 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -894,11 +894,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -910,10 +909,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 21 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 61 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 21, 61, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -947,7 +946,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1205,12 +1204,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y 4 - // Set the boundaries for probing (where the probe can reach). - #define LEFT_PROBE_BED_POSITION X_PROBE_OFFSET_FROM_EXTRUDER - #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (X_PROBE_OFFSET_FROM_EXTRUDER) + MIN_PROBE_EDGE) - #define FRONT_PROBE_BED_POSITION Y_PROBE_OFFSET_FROM_EXTRUDER - #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 65aca731f..59e3078ee 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1200,12 +1199,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index e626638e9..d04e81725 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1200,12 +1199,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index ccd0d10c7..15369a2f8 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -908,11 +908,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -924,10 +923,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -961,7 +960,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1219,12 +1218,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 1a2c98952..3ef58dd29 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -953,11 +953,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -969,10 +968,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -35 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.5 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -35, -6, -0.5 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1006,7 +1005,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1278,12 +1277,6 @@ #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST @@ -1404,7 +1397,7 @@ #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). //#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT MIN_PROBE_Y + #define Z_SAFE_HOMING_Y_POINT 4 #endif // Homing speeds (mm/m) diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index aa76f49d7..ccba80b6f 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -953,11 +953,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -969,10 +968,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1006,7 +1005,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1278,12 +1277,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST @@ -1403,7 +1396,7 @@ #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT 4 // Y point for Z homing when homing all axes (G28). #endif // Homing speeds (mm/m) diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 327b9add0..2fe120703 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 161e478b0..f54ba9cf9 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -899,11 +899,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -915,10 +914,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -952,7 +951,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1210,12 +1209,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 95b20d3a4..ef7e44b66 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -//#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -//#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges //#define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 9b342797f..35b21bc2d 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -//#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -//#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges //#define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 3a0ef22f1..3de2a9b46 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -935,11 +935,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -951,31 +950,23 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -//#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -//#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // ANET A8: FRONT-MOUNTED SENSOR WITH 3D PRINTED MOUNT -//#define X_PROBE_OFFSET_FROM_EXTRUDER -28 // X offset: -left +right [of the nozzle] -//#define Y_PROBE_OFFSET_FROM_EXTRUDER -45 // Y offset: -front +behind [the nozzle] -//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +//#define NOZZLE_TO_PROBE_OFFSET { -28, -45, 0 } // THESE ARE FOR THE OFFICIAL ANET REAR-MOUNTED SENSOR -//#define X_PROBE_OFFSET_FROM_EXTRUDER -1 // X offset: -left +right [of the nozzle] -//#define Y_PROBE_OFFSET_FROM_EXTRUDER 3 // Y offset: -front +behind [the nozzle] -//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +//#define NOZZLE_TO_PROBE_OFFSET { -1, 3, 0 } // ANET A6 with BLTouch/3D-Touch mounted right to the nozzle -#define X_PROBE_OFFSET_FROM_EXTRUDER 39 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 39, 0, 0 } //ANET A6 with BLTouch/3D-Touch betwen Fan and Belt // (mount: https://github.com/ralf-e/ANET_A6_modifications/tree/master/A6_X-Axis) -//#define X_PROBE_OFFSET_FROM_EXTRUDER -30 // X offset: -left +right [of the nozzle] -//#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] -//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.75 // Z offset: -below +above [the nozzle] +//#define NOZZLE_TO_PROBE_OFFSET { -30, 15, 0.75 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1010,7 +1001,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1312,36 +1303,6 @@ #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION 15 - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15) - //#define FRONT_PROBE_BED_POSITION 15 - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15) - - // ANET A6 - //#define LEFT_PROBE_BED_POSITION 20 - //#define RIGHT_PROBE_BED_POSITION 190 - //#define FRONT_PROBE_BED_POSITION 20 - //#define BACK_PROBE_BED_POSITION 190 - - // ANET A6 BLTOUCH right (39mm) to the nozzle - //#define LEFT_PROBE_BED_POSITION 36 - //#define RIGHT_PROBE_BED_POSITION 190 - //#define FRONT_PROBE_BED_POSITION 20 - //#define BACK_PROBE_BED_POSITION 190 - - // ANET A6 with new X-Axis and modded Y-Axis - //#define LEFT_PROBE_BED_POSITION 20 - //#define RIGHT_PROBE_BED_POSITION 205 - //#define FRONT_PROBE_BED_POSITION 20 - //#define BACK_PROBE_BED_POSITION 205 - - // ANET A6 with new X-Axis and modded Y-Axis, X0/Y0 front left bed edge - //#define LEFT_PROBE_BED_POSITION 20 - //#define RIGHT_PROBE_BED_POSITION 194 - //#define FRONT_PROBE_BED_POSITION 20 - //#define BACK_PROBE_BED_POSITION 194 - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 940372737..eeae0493e 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -901,11 +901,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -917,10 +916,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -954,7 +953,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1212,12 +1211,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 80e672061..188a3a1de 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -899,11 +899,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -915,10 +914,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -952,7 +951,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1210,12 +1209,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h index 29dfe0173..2c39c847c 100644 --- a/config/examples/Anet/E16/Configuration.h +++ b/config/examples/Anet/E16/Configuration.h @@ -900,11 +900,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -916,10 +915,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -953,7 +952,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1211,12 +1210,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 524fb60ac..a3a085700 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -898,11 +898,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -914,10 +913,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 75 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -2 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 75, 5, -2 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -951,7 +950,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1209,12 +1208,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index ffb9833c8..8521531a0 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -889,11 +889,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -905,10 +904,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -942,7 +941,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1200,12 +1199,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 48de22707..695392815 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 8becbcec1..bbd7bd15b 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION 15 - //#define RIGHT_PROBE_BED_POSITION 170 - //#define FRONT_PROBE_BED_POSITION 20 - //#define BACK_PROBE_BED_POSITION 170 - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index da21332fa..dc4ec2334 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION 15 - //#define RIGHT_PROBE_BED_POSITION 170 - //#define FRONT_PROBE_BED_POSITION 20 - //#define BACK_PROBE_BED_POSITION 170 - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 5d12c9c91..b39ed5eca 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -876,11 +876,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -892,10 +891,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -929,7 +928,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1187,12 +1186,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 201d30f98..41ec72637 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -889,11 +889,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -905,10 +904,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -942,7 +941,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION X_MIN_POS + (X_PROBE_OFFSET_FROM_EXTRUDER) - //#define RIGHT_PROBE_BED_POSITION X_MAX_POS - (X_PROBE_OFFSET_FROM_EXTRUDER) - //#define FRONT_PROBE_BED_POSITION Y_MIN_POS + (Y_PROBE_OFFSET_FROM_EXTRUDER) - //#define BACK_PROBE_BED_POSITION Y_MAX_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index c8c6cf044..3c99137ea 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -876,11 +876,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -892,10 +891,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -929,7 +928,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1187,12 +1186,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 46c4f3c78..0cb764380 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -887,11 +887,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -903,10 +902,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -940,7 +939,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1198,12 +1197,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h index 8dcebd612..b8844e05e 100644 --- a/config/examples/Creality/CR-10/Configuration.h +++ b/config/examples/Creality/CR-10/Configuration.h @@ -898,11 +898,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -914,10 +913,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -951,7 +950,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1209,12 +1208,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h index 7e8ac0eff..50d596d88 100644 --- a/config/examples/Creality/CR-10S/Configuration.h +++ b/config/examples/Creality/CR-10S/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1200,12 +1199,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h index 5705f0108..496fb80b7 100644 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ b/config/examples/Creality/CR-10_5S/Configuration.h @@ -889,11 +889,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -905,10 +904,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -942,7 +941,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1202,12 +1201,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h index 0062baa8d..869a99f36 100644 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ b/config/examples/Creality/CR-10mini/Configuration.h @@ -907,11 +907,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -923,10 +922,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -960,7 +959,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1218,12 +1217,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 1728cc205..751e5465c 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -891,11 +891,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -907,10 +906,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -944,7 +943,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1202,12 +1201,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 7e7c54485..cc4ad8449 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -891,11 +891,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -907,10 +906,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -944,7 +943,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1202,12 +1201,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 04dd56618..b43986e0c 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -898,11 +898,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -914,10 +913,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -951,7 +950,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1209,12 +1208,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 3dd658325..7828c174c 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -892,11 +892,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -908,10 +907,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -945,7 +944,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1203,12 +1202,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h index 019135ee1..b3e695495 100644 --- a/config/examples/Creality/Ender-3/Configuration.h +++ b/config/examples/Creality/Ender-3/Configuration.h @@ -892,11 +892,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -908,10 +907,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -945,7 +944,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1203,12 +1202,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 84f7304db..8e0fc2b4f 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -898,11 +898,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -914,10 +913,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -951,7 +950,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1209,12 +1208,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h index c1db6363a..7e6e7bb43 100644 --- a/config/examples/Creality/Ender-5/Configuration.h +++ b/config/examples/Creality/Ender-5/Configuration.h @@ -891,11 +891,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -907,10 +906,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -944,7 +943,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1202,12 +1201,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index a3ec472c7..c3bace97c 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 21 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 21, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h index fc9ea5e7b..bd37b61aa 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -946,7 +945,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1204,12 +1203,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 243b91482..3f1b7f896 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -898,11 +898,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -914,10 +913,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -951,7 +950,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1209,12 +1208,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 0005f60dc..5b32c7547 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -946,7 +945,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1204,12 +1203,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h index eb6bd1b8e..5939e0b1a 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -44 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.9 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -946,7 +945,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1204,12 +1203,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h index a12a5f4f4..08d5bf296 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -946,7 +945,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1204,12 +1203,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h index f665276dd..a7ed41f40 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -44 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.9 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -946,7 +945,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1204,12 +1203,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h index fcb1a8347..b1d355bc0 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -946,7 +945,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1204,12 +1203,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 2cff57d64..1836ff42b 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -890,11 +890,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -906,10 +905,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -943,7 +942,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1201,12 +1200,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h index 2677dee07..9e2afbe7e 100644 --- a/config/examples/Felix/Configuration.h +++ b/config/examples/Felix/Configuration.h @@ -870,11 +870,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -886,10 +885,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -923,7 +922,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1181,12 +1180,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index f7e24fa1e..b7222bf7f 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -870,11 +870,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -886,10 +885,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -923,7 +922,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1181,12 +1180,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 1a6df0599..bf5e79724 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -880,11 +880,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -896,10 +895,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -933,7 +932,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1192,12 +1191,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 597b3e9ec..4960cd50b 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -894,11 +894,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -910,10 +909,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 38 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -7 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -10.75 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 38, -7, -10.75 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 0 @@ -947,7 +946,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1205,12 +1204,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 9d2a83ae5..fad911678 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -971,11 +971,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -987,10 +986,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -22 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.5 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -22, 0, -1.5 } #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes @@ -1022,7 +1021,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1301,12 +1300,6 @@ #define GRID_MAX_POINTS_X 6 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - #define LEFT_PROBE_BED_POSITION 30 - #define RIGHT_PROBE_BED_POSITION 365 - #define FRONT_PROBE_BED_POSITION 30 - #define BACK_PROBE_BED_POSITION 365 - // The Z probe minimum outer margin (to validate G29 parameters). #define MIN_PROBE_EDGE 10 diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 728f74b2e..583f6d033 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -917,11 +917,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -933,10 +932,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -3 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 31 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.25 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -3, 31, -1.25 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 0 @@ -970,7 +969,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1228,12 +1227,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 6a165246d..df29a67c0 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -904,11 +904,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -920,10 +919,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -3 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 31 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.25 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -3, 31, -1.25 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 0 @@ -957,7 +956,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1224,12 +1223,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 5a706b6dd..724fa5a6e 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -871,11 +871,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -887,10 +886,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -37 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.6 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -924,7 +923,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1184,12 +1183,6 @@ #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index 9d927899d..eb29b27d7 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -871,11 +871,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -887,10 +886,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -37 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.6 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -924,7 +923,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1184,12 +1183,6 @@ #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 3fe919c82..7da452b27 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -871,11 +871,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -887,10 +886,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -37 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.6 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -924,7 +923,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1184,12 +1183,6 @@ #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 76dff419a..7126a9060 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -903,11 +903,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -919,10 +918,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -956,7 +955,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1214,12 +1213,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 289ade265..d2230d9c5 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 8 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 532c2a9fe..0c35f3d06 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -895,11 +895,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -911,10 +910,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -948,7 +947,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1206,12 +1205,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index fe2da423f..2ec9c32af 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -909,11 +909,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -925,10 +924,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 4 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -44 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.4 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 4, -44, -1.4 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -962,7 +961,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1220,12 +1219,6 @@ #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION 10 - //#define RIGHT_PROBE_BED_POSITION (X_MAX_POS - X_PROBE_OFFSET_FROM_EXTRUDER - 14) - //#define FRONT_PROBE_BED_POSITION 15 - //#define BACK_PROBE_BED_POSITION (Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER - 25) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 319314339..fa131b25e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -908,11 +908,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -924,10 +923,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -961,7 +960,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1219,12 +1218,6 @@ #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION 10 - //#define RIGHT_PROBE_BED_POSITION (X_MAX_POS - X_PROBE_OFFSET_FROM_EXTRUDER - 14) - //#define FRONT_PROBE_BED_POSITION 15 - //#define BACK_PROBE_BED_POSITION (Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER - 25) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 3a6c6cce2..702bccde0 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 96123fd32..da6501543 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index c092b6d02..c408fa8d6 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -875,11 +875,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -891,10 +890,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -21 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 22 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.54 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -21, 22, -1.54 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 20 @@ -928,7 +927,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1186,12 +1185,6 @@ #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y 3 - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 6ad0092b2..962688e65 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -892,11 +892,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -908,10 +907,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -945,7 +944,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1203,12 +1202,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 6197b1951..53cf30efb 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -895,11 +895,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -911,10 +910,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -948,7 +947,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1206,12 +1205,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 98b90e37b..72150ab1d 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -900,11 +900,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -916,10 +915,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -953,7 +952,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1211,12 +1210,6 @@ #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION 15 - //#define RIGHT_PROBE_BED_POSITION 170 - //#define FRONT_PROBE_BED_POSITION 20 - //#define BACK_PROBE_BED_POSITION 170 - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 6fea80ee9..9c231a7c7 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -895,11 +895,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -911,10 +910,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -948,7 +947,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1206,12 +1205,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index f54f8eacf..553882ae8 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -908,11 +908,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -924,10 +923,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -961,7 +960,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1219,12 +1218,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 01714089c..25a37e560 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -908,11 +908,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -924,14 +923,14 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ // Set for HoolyHoo's probe mount // http://www.thingiverse.com/thing:1960419 // Note: HoolyHoo mount is X=35, Y=-50. -//#define X_PROBE_OFFSET_FROM_EXTRUDER 35 // X offset: -left +right [of the nozzle] -//#define Y_PROBE_OFFSET_FROM_EXTRUDER -50 // Y offset: -front +behind [the nozzle] -//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +//#define NOZZLE_TO_PROBE_OFFSET { 35, -50, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -965,7 +964,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1227,12 +1226,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION 50 - //#define RIGHT_PROBE_BED_POSITION 150 - //#define FRONT_PROBE_BED_POSITION 50 - //#define BACK_PROBE_BED_POSITION 150 - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 2c39159a1..b5434599f 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -887,11 +887,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -903,10 +902,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -940,7 +939,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1198,12 +1197,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index e7c9c1567..4c26a75b7 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -892,11 +892,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -908,10 +907,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -945,7 +944,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1203,12 +1202,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 54464013b..90dab8026 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -892,11 +892,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -908,10 +907,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -945,7 +944,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1203,12 +1202,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 23ade8072..542718989 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -889,11 +889,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -905,10 +904,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -942,7 +941,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1200,12 +1199,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index c39645d44..520369a6f 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 32 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 32, 5, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 168e6d644..834604a63 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -896,11 +896,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -912,10 +911,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -949,7 +948,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1207,12 +1206,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 19e900f64..cbf90f256 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 0c72d23a9..2f8f932b0 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -928,11 +928,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -944,10 +943,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -981,7 +980,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1248,12 +1247,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 428006ffc..04d1bae81 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index f0a5889fa..a160e8a07 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -886,11 +886,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -902,10 +901,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -939,7 +938,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1197,12 +1196,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h index 67eeb7677..99341e6ee 100644 --- a/config/examples/SCARA/Configuration.h +++ b/config/examples/SCARA/Configuration.h @@ -897,11 +897,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -913,10 +912,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -950,7 +949,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1208,12 +1207,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index f2a82f9b7..dba17c39b 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/STM32/STM32F103R/Configuration.h b/config/examples/STM32/STM32F103R/Configuration.h index 61eb03301..f36d9df70 100644 --- a/config/examples/STM32/STM32F103R/Configuration.h +++ b/config/examples/STM32/STM32F103R/Configuration.h @@ -890,11 +890,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -906,10 +905,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -943,7 +942,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1201,12 +1200,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index d365a1160..99e7a1fc7 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h index 3370e292b..460d8b097 100644 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ b/config/examples/STM32/stm32f103ret6/Configuration.h @@ -890,11 +890,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -906,10 +905,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -943,7 +942,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1201,12 +1200,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index c80e5883f..93a09df42 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -919,11 +919,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -935,10 +934,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -972,7 +971,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1230,12 +1229,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index bae103e3b..344d0d967 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -946,7 +945,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1204,12 +1203,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 42dc8c273..4ead70ff1 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 18 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.5 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -939,7 +938,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1197,12 +1196,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index de30bf0f2..c4a695522 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -45 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -12 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -2.77 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -946,7 +945,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1204,12 +1203,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 95c502f94..124e66d93 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -45 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -12 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -2.77 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -946,7 +945,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1204,12 +1203,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 87fc44633..7390f9382 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 32 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.3 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 32, 5, -1.3 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index feb83f42a..e2439f045 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -939,11 +939,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -955,10 +954,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -992,7 +991,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1255,12 +1254,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 8ea89c2ae..d1be9b3b4 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 95928ea1e..b54cf6906 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -32 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.5 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -32, -10, -0.5 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 50 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1203,12 +1202,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index dc791fff5..cc51f465e 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -909,11 +909,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -925,10 +924,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -962,7 +961,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1220,12 +1219,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 86436a79d..65c9ec394 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -45 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -45, -55, -0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION 15 - //#define RIGHT_PROBE_BED_POSITION 270 - //#define FRONT_PROBE_BED_POSITION 20 - //#define BACK_PROBE_BED_POSITION 260 - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 9617b5607..dd36e8020 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -899,11 +899,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -915,10 +914,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -952,7 +951,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1210,12 +1209,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index eb21755fa..89ca88045 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 6a4fcf368..b56508e2f 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 70baf6e19..1532acddd 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -897,11 +897,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -913,10 +912,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -950,7 +949,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1208,12 +1207,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - #define LEFT_PROBE_BED_POSITION 15 - #define RIGHT_PROBE_BED_POSITION 200 - #define FRONT_PROBE_BED_POSITION 15 - #define BACK_PROBE_BED_POSITION 200 - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index eb8416a58..5fb409197 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -917,11 +917,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -933,10 +932,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -970,7 +969,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1229,12 +1228,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h index 3bc0bc38a..14195d73a 100644 --- a/config/examples/Velleman/K8400/Configuration.h +++ b/config/examples/Velleman/K8400/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 302a11df8..2c4355a93 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 77b6d337d..4ac36552f 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -907,11 +907,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -923,10 +922,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -960,7 +959,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1218,12 +1217,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 9c49f7737..704351a45 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -898,11 +898,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -914,10 +913,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -951,7 +950,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1209,12 +1208,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 9bf523593..37f88b457 100755 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index 64561330a..25174cf70 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -888,11 +888,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -904,10 +903,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -941,7 +940,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1199,12 +1198,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 561faf865..c18b06541 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1053,11 +1053,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1069,16 +1068,15 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] - #if ANYCUBIC_PROBE_VERSION == 2 - #define Z_PROBE_OFFSET_FROM_EXTRUDER -16.8 // Z offset: -below +above [the nozzle] + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.8 } #elif ANYCUBIC_PROBE_VERSION == 1 - #define Z_PROBE_OFFSET_FROM_EXTRUDER -19.0 // Z offset: -below +above [the nozzle] + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -19.0 } #else - #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } #endif // Certain types of probes need to stay away from edges @@ -1113,7 +1111,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1374,12 +1372,6 @@ #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - #define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - #define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - #define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - #define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 6f4f9a104..f4cdcc0d2 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -998,11 +998,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1014,10 +1013,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.65 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 5 @@ -1051,7 +1050,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1309,12 +1308,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 958f15d38..bb66e3a02 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1010,11 +1010,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1026,10 +1025,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.65 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 5 @@ -1063,7 +1062,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1321,12 +1320,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - #define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - #define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - #define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - #define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 8d215b8c5..36ac9143b 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1002,11 +1002,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1018,10 +1017,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.10 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 20 @@ -1055,7 +1054,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1314,12 +1313,6 @@ #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index bf1e110bd..bdfabc006 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1001,11 +1001,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1017,10 +1016,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.10 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 20 @@ -1054,7 +1053,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1313,12 +1312,6 @@ #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 0f8382381..3c379b4c7 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1001,11 +1001,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1017,10 +1016,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.25 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.25 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1054,7 +1053,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1313,12 +1312,6 @@ #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 701878728..9308fde28 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -989,11 +989,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1005,10 +1004,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1042,7 +1041,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1301,12 +1300,6 @@ #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 6312b27b4..bc3f024b3 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1004,11 +1004,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1020,10 +1019,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1057,7 +1056,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1316,12 +1315,6 @@ #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index aaddf0f9e..8724606a0 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -989,11 +989,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1005,10 +1004,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1042,7 +1041,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1301,12 +1300,6 @@ #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 2ae1ee35b..9a6aa048b 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -993,11 +993,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1009,10 +1008,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 20 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.10 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, 20, -1.10 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 20 @@ -1046,7 +1045,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1305,12 +1304,6 @@ #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 322557c1b..b5656b333 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -989,11 +989,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1005,10 +1004,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1042,7 +1041,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1301,12 +1300,6 @@ #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 5ddb48e98..dfaf41259 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -991,11 +991,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1007,10 +1006,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1044,7 +1043,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1303,12 +1302,6 @@ #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 179b13f63..1423db2ad 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -986,11 +986,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1002,14 +1001,15 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -23 // KosselPro actual: -22.919 -#define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // KosselPro actual: -6.304 +#define NOZZLE_TO_PROBE_OFFSET { -23, -6, -17.25 } // KosselPro actual: -22.919, -6.304, -17.45 /** * Kossel Pro note: The correct value is likely -17.45 but I'd rather err on the side of * not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed. */ -#define Z_PROBE_OFFSET_FROM_EXTRUDER -17.25 // Increase this if the first layer is too thin (remember: it's a negative number so increase means closer to zero). + // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1042,7 +1042,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1302,12 +1302,6 @@ #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 3c8fb421d..4d19fdc90 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -992,11 +992,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -1008,10 +1007,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle X offset: -left +right -#define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z probe to nozzle Z offset: -below (always!) +#define NOZZLE_TO_PROBE_OFFSET { 0.0, 0.0, 0.3 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -1045,7 +1044,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1304,12 +1303,6 @@ #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) - //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index d2075575a..d5278a6db 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -901,11 +901,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -917,10 +916,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -17 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.25 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -17, -10, -0.25 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 45 @@ -954,7 +953,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1213,12 +1212,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 2ba927633..3fe46fc03 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -852,7 +852,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -891,11 +891,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -907,10 +906,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -944,7 +943,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1202,12 +1201,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 51ec8f498..b565511f3 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -883,11 +883,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -899,10 +898,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -936,7 +935,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1194,12 +1193,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h index 7f63ff647..ff6bba598 100644 --- a/config/examples/wt150/Configuration.h +++ b/config/examples/wt150/Configuration.h @@ -893,11 +893,10 @@ /** * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. * * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } * * +-- BACK ---+ * | | @@ -909,10 +908,10 @@ * | | * O-- FRONT --+ * (0,0) + * + * Specify a Probe position as { X, Y, Z } */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Certain types of probes need to stay away from edges #define MIN_PROBE_EDGE 10 @@ -946,7 +945,7 @@ * * Use these settings to specify the distance (mm) to raise the probe (or * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. * Only integer values >= 1 are valid here. * * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. @@ -1204,12 +1203,6 @@ #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) - // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST