diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 9b6e2ef0d..675bed880 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 0a65a7478..4892aede9 100755
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -9488,7 +9488,7 @@ void disable_all_steppers() {
 void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
 
   #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-    if ((IS_SD_PRINTING || print_job_timer.isRunning()) && !(READ(FIL_RUNOUT_PIN) ^ FIL_RUNOUT_INVERTING))
+    if ((IS_SD_PRINTING || print_job_timer.isRunning()) && (READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING))
       handle_filament_runout();
   #endif
 
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 2281c9cf1..7fef2d4f9 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 72bbc1b2d..826267041 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -691,7 +691,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index 9d83b318d..3a5bcd622 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -691,7 +691,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 61ccc7a0c..60393bb2e 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -700,7 +700,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index 5c19fb1a8..51c5adf7d 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -702,7 +702,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 669b153b9..c0801e7d0 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -725,7 +725,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h
index 05f8a9c99..698464039 100644
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
index 4fd1a9f8a..cbfe32d78 100644
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index f30776177..586dd7d5c 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 54631863a..52f7d8ec7 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -706,7 +706,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index ba229bb42..a766d793d 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -723,7 +723,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index 0a8cf114a..df3b9dc8d 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -729,7 +729,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 01f9bb93f..b09c43e82 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -700,7 +700,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 4a0f3e010..bb378b14e 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -708,7 +708,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index 4dba4fc73..6c6b6547a 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -800,7 +800,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 563257831..4b43020df 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -794,7 +794,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 1adcd1520..8cbd98cdb 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -797,7 +797,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index f32c661c7..e15787433 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -798,7 +798,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index 0352f4add..9bf667548 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -800,7 +800,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 1e9841704..daa4c84a3 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -711,7 +711,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index a860f4815..0eb2832b5 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -704,7 +704,7 @@
                                  // It is assumed that when logic high = filament available
                                  //                    when logic  low = filament ran out
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
   #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif