From c4e34adcf14bcc9ee87472908e7aabd93a146a3e Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 2 May 2017 17:41:55 -0500 Subject: [PATCH] Apply formatting, coding standards to UBL --- Marlin/G26_Mesh_Validation_Tool.cpp | 20 +- Marlin/ubl_G29.cpp | 584 ++++++++++++++-------------- Marlin/ubl_motion.cpp | 24 +- 3 files changed, 313 insertions(+), 315 deletions(-) diff --git a/Marlin/G26_Mesh_Validation_Tool.cpp b/Marlin/G26_Mesh_Validation_Tool.cpp index 162f5a1b3..0a382c553 100644 --- a/Marlin/G26_Mesh_Validation_Tool.cpp +++ b/Marlin/G26_Mesh_Validation_Tool.cpp @@ -258,8 +258,8 @@ : find_closest_circle_to_print(x_pos, y_pos); // Find the closest Mesh Intersection to where we are now. if (location.x_index >= 0 && location.y_index >= 0) { - const float circle_x = pgm_read_float(&(ubl.mesh_index_to_xpos[location.x_index])), - circle_y = pgm_read_float(&(ubl.mesh_index_to_ypos[location.y_index])); + const float circle_x = pgm_read_float(&ubl.mesh_index_to_xpos[location.x_index]), + circle_y = pgm_read_float(&ubl.mesh_index_to_ypos[location.y_index]); // Let's do a couple of quick sanity checks. We can pull this code out later if we never see it catch a problem #ifdef DELTA @@ -401,8 +401,8 @@ for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) { for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) { if (!is_bit_set(circle_flags, i, j)) { - const float mx = pgm_read_float(&(ubl.mesh_index_to_xpos[i])), // We found a circle that needs to be printed - my = pgm_read_float(&(ubl.mesh_index_to_ypos[j])); + const float mx = pgm_read_float(&ubl.mesh_index_to_xpos[i]), // We found a circle that needs to be printed + my = pgm_read_float(&ubl.mesh_index_to_ypos[j]); // Get the distance to this intersection float f = HYPOT(X - mx, Y - my); @@ -446,11 +446,11 @@ // We found two circles that need a horizontal line to connect them // Print it! // - sx = pgm_read_float(&(ubl.mesh_index_to_xpos[ i ])) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // right edge - ex = pgm_read_float(&(ubl.mesh_index_to_xpos[i + 1])) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // left edge + sx = pgm_read_float(&ubl.mesh_index_to_xpos[ i ]) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // right edge + ex = pgm_read_float(&ubl.mesh_index_to_xpos[i + 1]) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // left edge sx = constrain(sx, X_MIN_POS + 1, X_MAX_POS - 1); - sy = ey = constrain(pgm_read_float(&(ubl.mesh_index_to_ypos[j])), Y_MIN_POS + 1, Y_MAX_POS - 1); + sy = ey = constrain(pgm_read_float(&ubl.mesh_index_to_ypos[j]), Y_MIN_POS + 1, Y_MAX_POS - 1); ex = constrain(ex, X_MIN_POS + 1, X_MAX_POS - 1); if (ubl.g26_debug_flag) { @@ -477,10 +477,10 @@ // We found two circles that need a vertical line to connect them // Print it! // - sy = pgm_read_float(&(ubl.mesh_index_to_ypos[ j ])) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // top edge - ey = pgm_read_float(&(ubl.mesh_index_to_ypos[j + 1])) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // bottom edge + sy = pgm_read_float(&ubl.mesh_index_to_ypos[ j ]) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // top edge + ey = pgm_read_float(&ubl.mesh_index_to_ypos[j + 1]) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // bottom edge - sx = ex = constrain(pgm_read_float(&(ubl.mesh_index_to_xpos[i])), X_MIN_POS + 1, X_MAX_POS - 1); + sx = ex = constrain(pgm_read_float(&ubl.mesh_index_to_xpos[i]), X_MIN_POS + 1, X_MAX_POS - 1); sy = constrain(sy, Y_MIN_POS + 1, Y_MAX_POS - 1); ey = constrain(ey, Y_MIN_POS + 1, Y_MAX_POS - 1); diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index 7cf3d5893..89dd2622f 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -352,7 +352,6 @@ } if (code_seen('Q')) { - const int test_pattern = code_has_value() ? code_value_int() : -1; if (!WITHIN(test_pattern, 0, 2)) { SERIAL_PROTOCOLLNPGM("Invalid test_pattern value. (0-2)\n"); @@ -433,13 +432,14 @@ // SERIAL_PROTOCOLLNPGM("Manually probing unreachable mesh locations.\n"); do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); - if (!x_flag && !y_flag) { // use a good default location for the path - // The flipped > and < operators on these two comparisons is - // intentional. It should cause the probed points to follow a - // nice path on Cartesian printers. It may make sense to - // have Delta printers default to the center of the bed. - // For now, until that is decided, it can be forced with the X - // and Y parameters. + if (!x_flag && !y_flag) { + /** + * Use a good default location for the path. + * The flipped > and < operators in these comparisons is intentional. + * It should cause the probed points to follow a nice path on Cartesian printers. + * It may make sense to have Delta printers default to the center of the bed. + * Until that is decided, this can be forced with the X and Y parameters. + */ x_pos = X_PROBE_OFFSET_FROM_EXTRUDER > 0 ? UBL_MESH_MAX_X : UBL_MESH_MIN_X; y_pos = Y_PROBE_OFFSET_FROM_EXTRUDER < 0 ? UBL_MESH_MAX_Y : UBL_MESH_MIN_Y; } @@ -461,27 +461,28 @@ } manually_probe_remaining_mesh(x_pos, y_pos, height, card_thickness, code_seen('O') || code_seen('M')); SERIAL_PROTOCOLLNPGM("G29 P2 finished"); - } - break; + + } break; case 3: { - // - // Populate invalid Mesh areas. Two choices are available to the user. The user can - // specify the constant to be used with a C # paramter. Or the user can allow the G29 P3 command to - // apply a 'reasonable' constant to the invalid mesh point. Some caution and scrutiny should be used - // on either of these paths! - // + /** + * Populate invalid mesh areas. Proceed with caution. + * Two choices are available: + * - Specify a constant with the 'C' parameter. + * - Allow 'G29 P3' to choose a 'reasonable' constant. + */ if (c_flag) { - while (repetition_cnt--) { + while (repetition_cnt--) { const mesh_index_pair location = find_closest_mesh_point_of_type(INVALID, x_pos, y_pos, USE_NOZZLE_AS_REFERENCE, NULL, false); - if (location.x_index < 0) break; // No more invalid Mesh Points to populate - ubl.z_values[location.x_index][location.y_index] = ubl_constant; + if (location.x_index < 0) break; // No more invalid Mesh Points to populate + ubl.z_values[location.x_index][location.y_index] = ubl_constant; } break; - } else // The user wants to do a 'Smart' fill where we use the surrounding known - smart_fill_mesh(); // values to provide a good guess of what the unprobed mesh point should be - break; } + else + smart_fill_mesh(); // Do a 'Smart' fill using nearby known values + + } break; case 4: // @@ -535,9 +536,9 @@ if (code_seen('T')) { - float z1 = probe_pt( LOGICAL_X_POSITION(UBL_PROBE_PT_1_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_1_Y), false, g29_verbose_level), - z2 = probe_pt( LOGICAL_X_POSITION(UBL_PROBE_PT_2_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_2_Y), false, g29_verbose_level), - z3 = probe_pt( LOGICAL_X_POSITION(UBL_PROBE_PT_3_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_3_Y), true, g29_verbose_level); + float z1 = probe_pt(LOGICAL_X_POSITION(UBL_PROBE_PT_1_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_1_Y), false, g29_verbose_level), + z2 = probe_pt(LOGICAL_X_POSITION(UBL_PROBE_PT_2_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_2_Y), false, g29_verbose_level), + z3 = probe_pt(LOGICAL_X_POSITION(UBL_PROBE_PT_3_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_3_Y), true, g29_verbose_level); // We need to adjust z1, z2, z3 by the Mesh Height at these points. Just because they are non-zero doesn't mean // the Mesh is tilted! (We need to compensate each probe point by what the Mesh says that location's height is) @@ -606,8 +607,8 @@ SERIAL_ECHOPAIR(" J ", y); SERIAL_ECHOPGM(" Z "); SERIAL_ECHO_F(ubl.z_values[x][y], 6); - SERIAL_ECHOPAIR(" ; X ", LOGICAL_X_POSITION(pgm_read_float(&(ubl.mesh_index_to_xpos[x])))); - SERIAL_ECHOPAIR(", Y ", LOGICAL_Y_POSITION(pgm_read_float(&(ubl.mesh_index_to_ypos[y])))); + SERIAL_ECHOPAIR(" ; X ", LOGICAL_X_POSITION(pgm_read_float(&ubl.mesh_index_to_xpos[x]))); + SERIAL_ECHOPAIR(", Y ", LOGICAL_Y_POSITION(pgm_read_float(&ubl.mesh_index_to_ypos[y]))); SERIAL_EOL; } return; @@ -653,9 +654,9 @@ } while (!ubl_lcd_clicked()); ubl.has_control_of_lcd_panel = true; // There is a race condition for the Encoder Wheel getting clicked. - // It could get detected in lcd_mesh_edit (actually _lcd_mesh_fine_tune) - // or here. So, until we are done looking for a long Encoder Wheel Press, - // we need to take control of the panel + // It could get detected in lcd_mesh_edit (actually _lcd_mesh_fine_tune) + // or here. So, until we are done looking for a long Encoder Wheel Press, + // we need to take control of the panel KEEPALIVE_STATE(IN_HANDLER); @@ -692,44 +693,39 @@ } void unified_bed_leveling::find_mean_mesh_height() { - uint8_t x, y; - int n; - float sum, sum_of_diff_squared, sigma, difference, mean; - - sum = sum_of_diff_squared = 0.0; - n = 0; - for (x = 0; x < GRID_MAX_POINTS_X; x++) - for (y = 0; y < GRID_MAX_POINTS_Y; y++) + float sum = 0.0; + int n = 0; + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) if (!isnan(ubl.z_values[x][y])) { sum += ubl.z_values[x][y]; n++; } - mean = sum / n; + const float mean = sum / n; // // Now do the sumation of the squares of difference from mean // - for (x = 0; x < GRID_MAX_POINTS_X; x++) - for (y = 0; y < GRID_MAX_POINTS_Y; y++) - if (!isnan(ubl.z_values[x][y])) { - difference = (ubl.z_values[x][y] - mean); - sum_of_diff_squared += difference * difference; - } + float sum_of_diff_squared = 0.0; + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + if (!isnan(ubl.z_values[x][y])) + sum_of_diff_squared += sq(ubl.z_values[x][y] - mean); SERIAL_ECHOLNPAIR("# of samples: ", n); SERIAL_ECHOPGM("Mean Mesh Height: "); SERIAL_ECHO_F(mean, 6); SERIAL_EOL; - sigma = sqrt(sum_of_diff_squared / (n + 1)); + const float sigma = sqrt(sum_of_diff_squared / (n + 1)); SERIAL_ECHOPGM("Standard Deviation: "); SERIAL_ECHO_F(sigma, 6); SERIAL_EOL; if (c_flag) - for (x = 0; x < GRID_MAX_POINTS_X; x++) - for (y = 0; y < GRID_MAX_POINTS_Y; y++) + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) if (!isnan(ubl.z_values[x][y])) ubl.z_values[x][y] -= mean + ubl_constant; } @@ -767,8 +763,8 @@ location = find_closest_mesh_point_of_type(INVALID, lx, ly, USE_PROBE_AS_REFERENCE, NULL, do_furthest); if (location.x_index >= 0 && location.y_index >= 0) { - const float rawx = pgm_read_float(&(ubl.mesh_index_to_xpos[location.x_index])), - rawy = pgm_read_float(&(ubl.mesh_index_to_ypos[location.y_index])); + const float rawx = pgm_read_float(&ubl.mesh_index_to_xpos[location.x_index]), + rawy = pgm_read_float(&ubl.mesh_index_to_ypos[location.y_index]); // TODO: Change to use `position_is_reachable` (for SCARA-compatibility) if (!WITHIN(rawx, MIN_PROBE_X, MAX_PROBE_X) || !WITHIN(rawy, MIN_PROBE_Y, MAX_PROBE_Y)) { @@ -797,7 +793,6 @@ } void unified_bed_leveling::tilt_mesh_based_on_3pts(const float &z1, const float &z2, const float &z3) { - float d, t, inv_z; int i, j; matrix_3x3 rotation; @@ -818,96 +813,94 @@ * However, we don't know its direction. We need it to point up. So if * Z is negative, we need to invert the sign of all components of the vector */ - if ( normal.z < 0.0 ) { + if (normal.z < 0.0) { normal.x = -normal.x; normal.y = -normal.y; normal.z = -normal.z; } - rotation = matrix_3x3::create_look_at( vector_3( normal.x, normal.y, 1)); + rotation = matrix_3x3::create_look_at(vector_3(normal.x, normal.y, 1)); - if (g29_verbose_level>2) { + if (g29_verbose_level > 2) { SERIAL_ECHOPGM("bed plane normal = ["); - SERIAL_PROTOCOL_F( normal.x, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( normal.y, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( normal.z, 7); - SERIAL_ECHOPGM("]\n"); - rotation.debug("rotation matrix:"); + SERIAL_PROTOCOL_F(normal.x, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(normal.y, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(normal.z, 7); + SERIAL_ECHOLNPGM("]"); + rotation.debug(PSTR("rotation matrix:")); } // // All of 3 of these points should give us the same d constant // - t = normal.x * UBL_PROBE_PT_1_X + normal.y * UBL_PROBE_PT_1_Y; - d = t + normal.z * z1; + float t = normal.x * (UBL_PROBE_PT_1_X) + normal.y * (UBL_PROBE_PT_1_Y), + d = t + normal.z * z1; if (g29_verbose_level>2) { SERIAL_ECHOPGM("D constant: "); - SERIAL_PROTOCOL_F( d, 7); - SERIAL_ECHOPGM(" \n"); + SERIAL_PROTOCOL_F(d, 7); + SERIAL_ECHOLNPGM(" "); } #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPGM("d from 1st point: "); - SERIAL_ECHO_F(d, 6); - SERIAL_EOL; - t = normal.x * UBL_PROBE_PT_2_X + normal.y * UBL_PROBE_PT_2_Y; - d = t + normal.z * z2; - SERIAL_ECHOPGM("d from 2nd point: "); - SERIAL_ECHO_F(d, 6); - SERIAL_EOL; - t = normal.x * UBL_PROBE_PT_3_X + normal.y * UBL_PROBE_PT_3_Y; - d = t + normal.z * z3; - SERIAL_ECHOPGM("d from 3rd point: "); - SERIAL_ECHO_F(d, 6); - SERIAL_EOL; + SERIAL_ECHOPGM("d from 1st point: "); + SERIAL_ECHO_F(d, 6); + SERIAL_EOL; + t = normal.x * (UBL_PROBE_PT_2_X) + normal.y * (UBL_PROBE_PT_2_Y); + d = t + normal.z * z2; + SERIAL_ECHOPGM("d from 2nd point: "); + SERIAL_ECHO_F(d, 6); + SERIAL_EOL; + t = normal.x * (UBL_PROBE_PT_3_X) + normal.y * (UBL_PROBE_PT_3_Y); + d = t + normal.z * z3; + SERIAL_ECHOPGM("d from 3rd point: "); + SERIAL_ECHO_F(d, 6); + SERIAL_EOL; } #endif - for (i = 0; i < GRID_MAX_POINTS_X; i++) { - for (j = 0; j < GRID_MAX_POINTS_Y; j++) { - float x_tmp, y_tmp, z_tmp; - x_tmp = pgm_read_float(ubl.mesh_index_to_xpos[i]); - y_tmp = pgm_read_float(ubl.mesh_index_to_ypos[j]); - z_tmp = ubl.z_values[i][j]; - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPGM("before rotation = ["); - SERIAL_PROTOCOL_F( x_tmp, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( y_tmp, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( z_tmp, 7); - SERIAL_ECHOPGM("] ---> "); - safe_delay(20); + for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) { + for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) { + float x_tmp = pgm_read_float(&ubl.mesh_index_to_xpos[i]), + y_tmp = pgm_read_float(&ubl.mesh_index_to_ypos[j]), + z_tmp = ubl.z_values[i][j]; + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPGM("before rotation = ["); + SERIAL_PROTOCOL_F(x_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(y_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(z_tmp, 7); + SERIAL_ECHOPGM("] ---> "); + safe_delay(20); + } + #endif + apply_rotation_xyz(rotation, x_tmp, y_tmp, z_tmp); + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPGM("after rotation = ["); + SERIAL_PROTOCOL_F(x_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(y_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(z_tmp, 7); + SERIAL_ECHOLNPGM("]"); + safe_delay(55); + } + #endif + ubl.z_values[i][j] += z_tmp - d; } - #endif - apply_rotation_xyz(rotation, x_tmp, y_tmp, z_tmp); - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPGM("after rotation = ["); - SERIAL_PROTOCOL_F( x_tmp, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( y_tmp, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( z_tmp, 7); - SERIAL_ECHOPGM("]\n"); - safe_delay(55); - } - #endif - ubl.z_values[i][j] += z_tmp - d; - } } - return; } float use_encoder_wheel_to_measure_point() { - while (ubl_lcd_clicked()) delay(50);; // wait for user to release encoder wheel + while (ubl_lcd_clicked()) delay(50); // wait for user to release encoder wheel delay(50); // debounce KEEPALIVE_STATE(PAUSED_FOR_USER); @@ -922,24 +915,29 @@ return current_position[Z_AXIS]; } - float measure_business_card_thickness(const float &in_height) { + static void say_and_take_a_measurement() { + SERIAL_PROTOCOLLNPGM(" and take a measurement."); + } + float measure_business_card_thickness(const float &in_height) { ubl.has_control_of_lcd_panel = true; - ubl.save_ubl_active_state_and_disable(); // we don't do bed level correction because we want the raw data when we probe + ubl.save_ubl_active_state_and_disable(); // Disable bed level correction for probing do_blocking_move_to_z(in_height); - do_blocking_move_to_xy((float(UBL_MESH_MAX_X) - float(UBL_MESH_MIN_X)) / 2.0, (float(UBL_MESH_MAX_Y) - float(UBL_MESH_MIN_Y)) / 2.0); - //, min(planner.max_feedrate_mm_s[X_AXIS], planner.max_feedrate_mm_s[Y_AXIS])/2.0); + do_blocking_move_to_xy(0.5 * (UBL_MESH_MAX_X - (UBL_MESH_MIN_X)), 0.5 * (UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y))); + //, min(planner.max_feedrate_mm_s[X_AXIS], planner.max_feedrate_mm_s[Y_AXIS]) / 2.0); stepper.synchronize(); - SERIAL_PROTOCOLLNPGM("Place Shim Under Nozzle and Perform Measurement."); - + SERIAL_PROTOCOLPGM("Place shim under nozzle"); + say_and_take_a_measurement(); const float z1 = use_encoder_wheel_to_measure_point(); do_blocking_move_to_z(current_position[Z_AXIS] + SIZE_OF_LITTLE_RAISE); - stepper.synchronize(); - SERIAL_PROTOCOLLNPGM("Remove Shim and Measure Bed Height."); + + SERIAL_PROTOCOLPGM("Remove shim"); + say_and_take_a_measurement(); + const float z2 = use_encoder_wheel_to_measure_point(); do_blocking_move_to_z(current_position[Z_AXIS] + SIZE_OF_LITTLE_RAISE); @@ -968,8 +966,8 @@ // It doesn't matter if the probe can't reach the NAN location. This is a manual probe. if (location.x_index < 0 && location.y_index < 0) continue; - const float rawx = pgm_read_float(&(ubl.mesh_index_to_xpos[location.x_index])), - rawy = pgm_read_float(&(ubl.mesh_index_to_ypos[location.y_index])); + const float rawx = pgm_read_float(&ubl.mesh_index_to_xpos[location.x_index]), + rawy = pgm_read_float(&ubl.mesh_index_to_ypos[location.y_index]); // TODO: Change to use `position_is_reachable` (for SCARA-compatibility) if (!WITHIN(rawx, UBL_MESH_MIN_X, UBL_MESH_MAX_X) || !WITHIN(rawy, UBL_MESH_MIN_Y, UBL_MESH_MAX_Y)) { @@ -999,11 +997,9 @@ if (do_ubl_mesh_map) ubl.display_map(map_type); // show user where we're probing - - while (ubl_lcd_clicked()) delay(50);; // wait for user to release encoder wheel - delay(50); // debounce - - while (!ubl_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here! + while (ubl_lcd_clicked()) delay(50); // wait for user to release encoder wheel + delay(50); // debounce + while (!ubl_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here! idle(); if (ubl.encoder_diff) { do_blocking_move_to_z(current_position[Z_AXIS] + float(ubl.encoder_diff) / 100.0); @@ -1011,7 +1007,6 @@ } } - const millis_t nxt = millis() + 1500L; while (ubl_lcd_clicked()) { // debounce and watch for abort idle(); @@ -1044,33 +1039,43 @@ do_blocking_move_to_xy(lx, ly); } + static void say_ubl_name() { + SERIAL_PROTOCOLPGM("Unified Bed Leveling "); + } + + static void report_ubl_state() { + say_ubl_name(); + SERIAL_PROTOCOLPGM("System "); + if (!ubl.state.active) SERIAL_PROTOCOLPGM("de"); + SERIAL_PROTOCOLLNPGM("activated.\n"); + } + bool g29_parameter_parsing() { bool err_flag = false; - LCD_MESSAGEPGM("Doing G29 UBL!"); + LCD_MESSAGEPGM("Doing G29 UBL!"); + lcd_quick_feedback(); + ubl_constant = 0.0; repetition_cnt = 0; - lcd_quick_feedback(); x_flag = code_seen('X') && code_has_value(); x_pos = x_flag ? code_value_float() : current_position[X_AXIS]; - y_flag = code_seen('Y') && code_has_value(); y_pos = y_flag ? code_value_float() : current_position[Y_AXIS]; - repeat_flag = code_seen('R'); if (repeat_flag) { repetition_cnt = code_has_value() ? code_value_int() : (GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y); if (repetition_cnt < 1) { - SERIAL_PROTOCOLLNPGM("Invalid Repetition count.\n"); + SERIAL_PROTOCOLLNPGM("?(R)epetition count invalid (1+).\n"); return UBL_ERR; } } g29_verbose_level = code_seen('V') ? code_value_int() : 0; if (!WITHIN(g29_verbose_level, 0, 4)) { - SERIAL_PROTOCOLLNPGM("Invalid Verbose Level specified. (0-4)\n"); + SERIAL_PROTOCOLLNPGM("?(V)erbose Level is implausible (0-4)\n"); err_flag = true; } @@ -1099,32 +1104,35 @@ if (err_flag) return UBL_ERR; - if (code_seen('A')) { // Activate the Unified Bed Leveling System + // Activate or deactivate UBL + if (code_seen('A')) { + if (code_seen('D')) { + SERIAL_PROTOCOLLNPGM("?Can't activate and deactivate at the same time.\n"); + return UBL_ERR; + } ubl.state.active = 1; - SERIAL_PROTOCOLLNPGM("Unified Bed Leveling System activated.\n"); + report_ubl_state(); } - - c_flag = code_seen('C'); - if (c_flag) - ubl_constant = code_value_float(); - - if (code_seen('D')) { // Disable the Unified Bed Leveling System + else if (code_seen('D')) { ubl.state.active = 0; - SERIAL_PROTOCOLLNPGM("Unified Bed Leveling System de-activated.\n"); + report_ubl_state(); } + // Set global 'C' flag and its value + if ((c_flag = code_seen('C'))) + ubl_constant = code_value_float(); + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) if (code_seen('F') && code_has_value()) { const float fh = code_value_float(); if (!WITHIN(fh, 0.0, 100.0)) { - SERIAL_PROTOCOLLNPGM("?Bed Level Correction Fade Height Not Plausible.\n"); + SERIAL_PROTOCOLLNPGM("?(F)ade height for Bed Level Correction not plausible.\n"); return UBL_ERR; } set_z_fade_height(fh); } #endif - map_type = code_seen('O') && code_has_value() ? code_value_int() : 0; if (!WITHIN(map_type, 0, 1)) { SERIAL_PROTOCOLLNPGM("Invalid map type.\n"); @@ -1146,7 +1154,7 @@ * This function goes away after G29 debug is complete. But for right now, it is a handy * routine to dump binary data structures. */ -/* + /* void dump(char * const str, const float &f) { char *ptr; @@ -1164,7 +1172,7 @@ SERIAL_EOL; } -*/ + //*/ static int ubl_state_at_invocation = 0, ubl_state_recursion_chk = 0; @@ -1191,7 +1199,6 @@ ubl.state.active = ubl_state_at_invocation; } - /** * Much of the 'What?' command can be eliminated. But until we are fully debugged, it is * good to have the extra information. Soon... we prune this to just a few items @@ -1199,7 +1206,8 @@ void g29_what_command() { const uint16_t k = E2END - ubl.eeprom_start; - SERIAL_PROTOCOLPGM("Unified Bed Leveling System Version " UBL_VERSION " "); + say_ubl_name(); + SERIAL_PROTOCOLPGM("System Version " UBL_VERSION " "); if (ubl.state.active) SERIAL_PROTOCOLCHAR('A'); else @@ -1230,11 +1238,11 @@ SERIAL_EOL; safe_delay(25); - SERIAL_PROTOCOLLNPAIR("ubl.eeprom_start=0x", hex_word(ubl.eeprom_start)); + SERIAL_PROTOCOLLNPAIR("ubl.eeprom_start=", hex_address((void*)ubl.eeprom_start)); SERIAL_PROTOCOLPGM("X-Axis Mesh Points at: "); for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) { - SERIAL_PROTOCOL_F(LOGICAL_X_POSITION(pgm_read_float(&(ubl.mesh_index_to_xpos[i]))), 1); + SERIAL_PROTOCOL_F(LOGICAL_X_POSITION(pgm_read_float(&ubl.mesh_index_to_xpos[i])), 1); SERIAL_PROTOCOLPGM(" "); safe_delay(50); } @@ -1242,7 +1250,7 @@ SERIAL_PROTOCOLPGM("Y-Axis Mesh Points at: "); for (uint8_t i = 0; i < GRID_MAX_POINTS_Y; i++) { - SERIAL_PROTOCOL_F(LOGICAL_Y_POSITION(pgm_read_float(&(ubl.mesh_index_to_ypos[i]))), 1); + SERIAL_PROTOCOL_F(LOGICAL_Y_POSITION(pgm_read_float(&ubl.mesh_index_to_ypos[i])), 1); SERIAL_PROTOCOLPGM(" "); safe_delay(50); } @@ -1296,8 +1304,10 @@ SERIAL_EOL; safe_delay(50); - if (!ubl.sanity_check()) - SERIAL_PROTOCOLLNPGM("Unified Bed Leveling sanity checks passed."); + if (!ubl.sanity_check()) { + say_ubl_name(); + SERIAL_PROTOCOLLNPGM("sanity checks passed."); + } } /** @@ -1357,18 +1367,18 @@ ubl.z_values[x][y] -= tmp_z_values[x][y]; } - mesh_index_pair find_closest_mesh_point_of_type(const MeshPointType type, const float &lx, const float &ly, const bool probe_as_reference, unsigned int bits[16], bool far_flag) { - float distance, closest = far_flag ? -99999.99 : 99999.99; - mesh_index_pair return_val; - - return_val.x_index = return_val.y_index = -1; + mesh_index_pair find_closest_mesh_point_of_type(const MeshPointType type, const float &lx, const float &ly, const bool probe_as_reference, unsigned int bits[16], const bool far_flag) { + mesh_index_pair out_mesh; + out_mesh.x_index = out_mesh.y_index = -1; const float current_x = current_position[X_AXIS], current_y = current_position[Y_AXIS]; // Get our reference position. Either the nozzle or probe location. - const float px = lx - (probe_as_reference==USE_PROBE_AS_REFERENCE ? X_PROBE_OFFSET_FROM_EXTRUDER : 0), - py = ly - (probe_as_reference==USE_PROBE_AS_REFERENCE ? Y_PROBE_OFFSET_FROM_EXTRUDER : 0); + const float px = lx - (probe_as_reference == USE_PROBE_AS_REFERENCE ? X_PROBE_OFFSET_FROM_EXTRUDER : 0), + py = ly - (probe_as_reference == USE_PROBE_AS_REFERENCE ? Y_PROBE_OFFSET_FROM_EXTRUDER : 0); + + float closest = far_flag ? -99999.99 : 99999.99; for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) { for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) { @@ -1380,13 +1390,13 @@ // We only get here if we found a Mesh Point of the specified type - const float rawx = pgm_read_float(&(ubl.mesh_index_to_xpos[i])), // Check if we can probe this mesh location - rawy = pgm_read_float(&(ubl.mesh_index_to_ypos[j])); + const float rawx = pgm_read_float(&ubl.mesh_index_to_xpos[i]), // Check if we can probe this mesh location + rawy = pgm_read_float(&ubl.mesh_index_to_ypos[j]); // If using the probe as the reference there are some unreachable locations. // Prune them from the list and ignore them till the next Phase (manual nozzle probing). - if (probe_as_reference==USE_PROBE_AS_REFERENCE && + if (probe_as_reference == USE_PROBE_AS_REFERENCE && (!WITHIN(rawx, MIN_PROBE_X, MAX_PROBE_X) || !WITHIN(rawy, MIN_PROBE_Y, MAX_PROBE_Y)) ) continue; @@ -1396,30 +1406,38 @@ const float mx = LOGICAL_X_POSITION(rawx), // Check if we can probe this mesh location my = LOGICAL_Y_POSITION(rawy); - distance = HYPOT(px - mx, py - my) + HYPOT(current_x - mx, current_y - my) * 0.1; - - if (far_flag) { // If doing the far_flag action, we want to be as far as possible - for (uint8_t k = 0; k < GRID_MAX_POINTS_X; k++) { // from the starting point and from any other probed points. We - for (uint8_t l = 0; l < GRID_MAX_POINTS_Y; l++) { // want the next point spread out and filling in any blank spaces - if (!isnan(ubl.z_values[k][l])) { // in the mesh. So we add in some of the distance to every probed - distance += sq(i - k) * (MESH_X_DIST) * .05 // point we can find. + float distance = HYPOT(px - mx, py - my) + HYPOT(current_x - mx, current_y - my) * 0.1; + + /** + * If doing the far_flag action, we want to be as far as possible + * from the starting point and from any other probed points. We + * want the next point spread out and filling in any blank spaces + * in the mesh. So we add in some of the distance to every probed + * point we can find. + */ + if (far_flag) { + for (uint8_t k = 0; k < GRID_MAX_POINTS_X; k++) { + for (uint8_t l = 0; l < GRID_MAX_POINTS_Y; l++) { + if (!isnan(ubl.z_values[k][l])) { + distance += sq(i - k) * (MESH_X_DIST) * .05 + sq(j - l) * (MESH_Y_DIST) * .05; } } } } - if (far_flag == (distance > closest) && distance != closest) { // if far_flag, look for farthest point + // if far_flag, look for farthest point + if (far_flag == (distance > closest) && distance != closest) { closest = distance; // We found a closer/farther location with - return_val.x_index = i; // the specified type of mesh value. - return_val.y_index = j; - return_val.distance = closest; + out_mesh.x_index = i; // the specified type of mesh value. + out_mesh.y_index = j; + out_mesh.distance = closest; } } } // for j } // for i - return return_val; + return out_mesh; } void fine_tune_mesh(const float &lx, const float &ly, const bool do_ubl_mesh_map) { @@ -1439,15 +1457,15 @@ do_blocking_move_to_xy(lx, ly); do { location = find_closest_mesh_point_of_type(SET_IN_BITMAP, lx, ly, USE_NOZZLE_AS_REFERENCE, not_done, false); - // It doesn't matter if the probe can not reach this - // location. This is a manual edit of the Mesh Point. + // It doesn't matter if the probe can't reach this + // location. This is a manual edit of the Mesh Point. if (location.x_index < 0 && location.y_index < 0) continue; // abort if we can't find any more points. bit_clear(not_done, location.x_index, location.y_index); // Mark this location as 'adjusted' so we will find a // different location the next time through the loop - const float rawx = pgm_read_float(&(ubl.mesh_index_to_xpos[location.x_index])), - rawy = pgm_read_float(&(ubl.mesh_index_to_ypos[location.y_index])); + const float rawx = pgm_read_float(&ubl.mesh_index_to_xpos[location.x_index]), + rawy = pgm_read_float(&ubl.mesh_index_to_ypos[location.y_index]); // TODO: Change to use `position_is_reachable` (for SCARA-compatibility) if (!WITHIN(rawx, X_MIN_POS, X_MAX_POS) || !WITHIN(rawy, Y_MIN_POS, Y_MAX_POS)) { // In theory, we don't need this check. @@ -1464,45 +1482,31 @@ do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE); // Move the nozzle to where we are going to edit do_blocking_move_to_xy(LOGICAL_X_POSITION(rawx), LOGICAL_Y_POSITION(rawy)); - - - - - round_off = (int32_t)(new_z * 1000.0); // we chop off the last digits just to be clean. We are rounding to the new_z = float(round_off) / 1000.0; - - KEEPALIVE_STATE(PAUSED_FOR_USER); ubl.has_control_of_lcd_panel = true; - if (do_ubl_mesh_map) ubl.display_map(map_type); // show the user which point is being adjusted - - lcd_implementation_clear(); lcd_mesh_edit_setup(new_z); - - do { new_z = lcd_mesh_edit(); idle(); } while (!ubl_lcd_clicked()); - lcd_return_to_status(); - - - - ubl.has_control_of_lcd_panel = true; // There is a race condition for the Encoder Wheel getting clicked. - // It could get detected in lcd_mesh_edit (actually _lcd_mesh_fine_tune) - // or here. + // There is a race condition for the Encoder Wheel getting clicked. + // It could get detected in lcd_mesh_edit (actually _lcd_mesh_fine_tune) + // or here. + ubl.has_control_of_lcd_panel = true; } + const millis_t nxt = millis() + 1500UL; while (ubl_lcd_clicked()) { // debounce and watch for abort idle(); @@ -1621,120 +1625,115 @@ void unified_bed_leveling::tilt_mesh_based_on_probed_grid(const bool do_ubl_mesh_map) { - int8_t i, j ,k, xCount, yCount, xi, yi; // counter variables - int8_t ix, iy, zig_zag=0, status; + constexpr int16_t x_min = max(MIN_PROBE_X, UBL_MESH_MIN_X), + x_max = min(MAX_PROBE_X, UBL_MESH_MAX_X), + y_min = max(MIN_PROBE_Y, UBL_MESH_MIN_Y), + y_max = min(MAX_PROBE_Y, UBL_MESH_MAX_Y); + + const float dx = float(x_max - x_min) / (grid_size - 1.0), + dy = float(y_max - y_min) / (grid_size - 1.0); - float dx, dy, x, y, measured_z, inv_z; struct linear_fit_data lsf_results; - matrix_3x3 rotation; - vector_3 normal; + incremental_LSF_reset(&lsf_results); - int16_t x_min = max((MIN_PROBE_X),(UBL_MESH_MIN_X)), - x_max = min((MAX_PROBE_X),(UBL_MESH_MAX_X)), - y_min = max((MIN_PROBE_Y),(UBL_MESH_MIN_Y)), - y_max = min((MAX_PROBE_Y),(UBL_MESH_MAX_Y)); + bool zig_zag = false; + for (uint8_t ix = 0; ix < grid_size; ix++) { + const float x = float(x_min) + ix * dx; + for (int8_t iy = 0; iy < grid_size; iy++) { + const float y = float(y_min) + dy * (zig_zag ? grid_size - 1 - iy : iy); + float measured_z = probe_pt(LOGICAL_X_POSITION(x), LOGICAL_Y_POSITION(y), code_seen('E'), g29_verbose_level); + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_CHAR('('); + SERIAL_PROTOCOL_F(x, 7); + SERIAL_CHAR(','); + SERIAL_PROTOCOL_F(y, 7); + SERIAL_ECHOPGM(") logical: "); + SERIAL_CHAR('('); + SERIAL_PROTOCOL_F(LOGICAL_X_POSITION(x), 7); + SERIAL_CHAR(','); + SERIAL_PROTOCOL_F(LOGICAL_X_POSITION(y), 7); + SERIAL_ECHOPGM(") measured: "); + SERIAL_PROTOCOL_F(measured_z, 7); + SERIAL_ECHOPGM(" correction: "); + SERIAL_PROTOCOL_F(ubl.get_z_correction(LOGICAL_X_POSITION(x), LOGICAL_Y_POSITION(y)), 7); + } + #endif - dx = ((float)(x_max-x_min)) / (grid_size-1.0); - dy = ((float)(y_max-y_min)) / (grid_size-1.0); + measured_z -= ubl.get_z_correction(LOGICAL_X_POSITION(x), LOGICAL_Y_POSITION(y)) /* + zprobe_zoffset */ ; - incremental_LSF_reset(&lsf_results); - for(ix=0; ix>>---> "); + SERIAL_PROTOCOL_F(measured_z, 7); + SERIAL_EOL; } - #endif - measured_z -= ubl.get_z_correction(LOGICAL_X_POSITION(x), LOGICAL_Y_POSITION(y)) /* + zprobe_zoffset */ ; - - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPGM(" final >>>---> "); - SERIAL_PROTOCOL_F( measured_z, 7); - SERIAL_ECHOPGM("\n"); - } - #endif - incremental_LSF(&lsf_results, x, y, measured_z); - } + #endif - zig_zag = !zig_zag; + incremental_LSF(&lsf_results, x, y, measured_z); } - status = finish_incremental_LSF(&lsf_results); - if (g29_verbose_level>3) { + zig_zag ^= true; + } + + const int status = finish_incremental_LSF(&lsf_results); + + if (g29_verbose_level > 3) { SERIAL_ECHOPGM("LSF Results A="); - SERIAL_PROTOCOL_F( lsf_results.A, 7); + SERIAL_PROTOCOL_F(lsf_results.A, 7); SERIAL_ECHOPGM(" B="); - SERIAL_PROTOCOL_F( lsf_results.B, 7); + SERIAL_PROTOCOL_F(lsf_results.B, 7); SERIAL_ECHOPGM(" D="); - SERIAL_PROTOCOL_F( lsf_results.D, 7); - SERIAL_CHAR('\n'); + SERIAL_PROTOCOL_F(lsf_results.D, 7); + SERIAL_EOL; } - normal = vector_3( lsf_results.A, lsf_results.B, 1.0000); - normal = normal.get_normal(); + vector_3 normal = vector_3(lsf_results.A, lsf_results.B, 1.0000).get_normal(); - if (g29_verbose_level>2) { + if (g29_verbose_level > 2) { SERIAL_ECHOPGM("bed plane normal = ["); - SERIAL_PROTOCOL_F( normal.x, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( normal.y, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( normal.z, 7); - SERIAL_ECHOPGM("]\n"); + SERIAL_PROTOCOL_F(normal.x, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(normal.y, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(normal.z, 7); + SERIAL_ECHOLNPGM("]"); } - rotation = matrix_3x3::create_look_at( vector_3( lsf_results.A, lsf_results.B, 1)); + matrix_3x3 rotation = matrix_3x3::create_look_at(vector_3(lsf_results.A, lsf_results.B, 1)); + + for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) { + for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) { + float x_tmp = pgm_read_float(&ubl.mesh_index_to_xpos[i]), + y_tmp = pgm_read_float(&ubl.mesh_index_to_ypos[j]), + z_tmp = ubl.z_values[i][j]; - for (i = 0; i < GRID_MAX_POINTS_X; i++) { - for (j = 0; j < GRID_MAX_POINTS_Y; j++) { - float x_tmp, y_tmp, z_tmp; - x_tmp = pgm_read_float(&(ubl.mesh_index_to_xpos[i])); - y_tmp = pgm_read_float(&(ubl.mesh_index_to_ypos[j])); - z_tmp = ubl.z_values[i][j]; #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { SERIAL_ECHOPGM("before rotation = ["); - SERIAL_PROTOCOL_F( x_tmp, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( y_tmp, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( z_tmp, 7); + SERIAL_PROTOCOL_F(x_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(y_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(z_tmp, 7); SERIAL_ECHOPGM("] ---> "); safe_delay(20); } #endif + apply_rotation_xyz(rotation, x_tmp, y_tmp, z_tmp); + #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { SERIAL_ECHOPGM("after rotation = ["); - SERIAL_PROTOCOL_F( x_tmp, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( y_tmp, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( z_tmp, 7); - SERIAL_ECHOPGM("]\n"); + SERIAL_PROTOCOL_F(x_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(y_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(z_tmp, 7); + SERIAL_ECHOLNPGM("]"); safe_delay(55); } - #endif ubl.z_values[i][j] += z_tmp - lsf_results.D; @@ -1743,27 +1742,26 @@ #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { - rotation.debug("rotation matrix:"); + rotation.debug(PSTR("rotation matrix:")); SERIAL_ECHOPGM("LSF Results A="); - SERIAL_PROTOCOL_F( lsf_results.A, 7); + SERIAL_PROTOCOL_F(lsf_results.A, 7); SERIAL_ECHOPGM(" B="); - SERIAL_PROTOCOL_F( lsf_results.B, 7); + SERIAL_PROTOCOL_F(lsf_results.B, 7); SERIAL_ECHOPGM(" D="); - SERIAL_PROTOCOL_F( lsf_results.D, 7); - SERIAL_CHAR('\n'); + SERIAL_PROTOCOL_F(lsf_results.D, 7); + SERIAL_EOL; safe_delay(55); SERIAL_ECHOPGM("bed plane normal = ["); - SERIAL_PROTOCOL_F( normal.x, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( normal.y, 7); - SERIAL_ECHOPGM(","); - SERIAL_PROTOCOL_F( normal.z, 7); + SERIAL_PROTOCOL_F(normal.x, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(normal.y, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(normal.z, 7); SERIAL_ECHOPGM("]\n"); - SERIAL_CHAR('\n'); + SERIAL_EOL; } #endif - return; } #endif // AUTO_BED_LEVELING_UBL diff --git a/Marlin/ubl_motion.cpp b/Marlin/ubl_motion.cpp index fd187259d..b1f8946e5 100644 --- a/Marlin/ubl_motion.cpp +++ b/Marlin/ubl_motion.cpp @@ -154,7 +154,7 @@ * to create a 1-over number for us. That will allow us to do a floating point multiply instead of a floating point divide. */ - const float xratio = (RAW_X_POSITION(end[X_AXIS]) - pgm_read_float(&(ubl.mesh_index_to_xpos[cell_dest_xi]))) * (1.0 / (MESH_X_DIST)), + const float xratio = (RAW_X_POSITION(end[X_AXIS]) - pgm_read_float(&ubl.mesh_index_to_xpos[cell_dest_xi])) * (1.0 / (MESH_X_DIST)), z1 = ubl.z_values[cell_dest_xi ][cell_dest_yi ] + xratio * (ubl.z_values[cell_dest_xi + 1][cell_dest_yi ] - ubl.z_values[cell_dest_xi][cell_dest_yi ]), z2 = ubl.z_values[cell_dest_xi ][cell_dest_yi + 1] + xratio * @@ -163,7 +163,7 @@ // we are done with the fractional X distance into the cell. Now with the two Z-Heights we have calculated, we // are going to apply the Y-Distance into the cell to interpolate the final Z correction. - const float yratio = (RAW_Y_POSITION(end[Y_AXIS]) - pgm_read_float(&(ubl.mesh_index_to_ypos[cell_dest_yi]))) * (1.0 / (MESH_Y_DIST)); + const float yratio = (RAW_Y_POSITION(end[Y_AXIS]) - pgm_read_float(&ubl.mesh_index_to_ypos[cell_dest_yi])) * (1.0 / (MESH_Y_DIST)); float z0 = z1 + (z2 - z1) * yratio; @@ -198,8 +198,8 @@ const float dx = end[X_AXIS] - start[X_AXIS], dy = end[Y_AXIS] - start[Y_AXIS]; - const int left_flag = dx < 0.0 ? 1.0 : 0.0, - down_flag = dy < 0.0 ? 1.0 : 0.0; + const int left_flag = dx < 0.0 ? 1 : 0, + down_flag = dy < 0.0 ? 1 : 0; const float adx = left_flag ? -dx : dx, ady = down_flag ? -dy : dy; @@ -230,8 +230,8 @@ const float m = dy / dx, c = start[Y_AXIS] - m * start[X_AXIS]; - const bool inf_normalized_flag=isinf(e_normalized_dist), - inf_m_flag=isinf(m); + const bool inf_normalized_flag = isinf(e_normalized_dist), + inf_m_flag = isinf(m); /** * This block handles vertical lines. These are lines that stay within the same * X Cell column. They do not need to be perfectly vertical. They just can @@ -241,7 +241,7 @@ current_yi += down_flag; // Line is heading down, we just want to go to the bottom while (current_yi != cell_dest_yi + down_flag) { current_yi += dyi; - const float next_mesh_line_y = LOGICAL_Y_POSITION(pgm_read_float(&(ubl.mesh_index_to_ypos[current_yi]))); + const float next_mesh_line_y = LOGICAL_Y_POSITION(pgm_read_float(&ubl.mesh_index_to_ypos[current_yi])); /** * if the slope of the line is infinite, we won't do the calculations @@ -263,7 +263,7 @@ */ if (isnan(z0)) z0 = 0.0; - const float y = LOGICAL_Y_POSITION(pgm_read_float(&(ubl.mesh_index_to_ypos[current_yi]))); + const float y = LOGICAL_Y_POSITION(pgm_read_float(&ubl.mesh_index_to_ypos[current_yi])); /** * Without this check, it is possible for the algorithm to generate a zero length move in the case @@ -321,7 +321,7 @@ // edge of this cell for the first move. while (current_xi != cell_dest_xi + left_flag) { current_xi += dxi; - const float next_mesh_line_x = LOGICAL_X_POSITION(pgm_read_float(&(ubl.mesh_index_to_xpos[current_xi]))), + const float next_mesh_line_x = LOGICAL_X_POSITION(pgm_read_float(&ubl.mesh_index_to_xpos[current_xi])), y = m * next_mesh_line_x + c; // Calculate Y at the next X mesh line float z0 = ubl.z_correction_for_y_on_vertical_mesh_line(y, current_xi, current_yi); @@ -337,7 +337,7 @@ */ if (isnan(z0)) z0 = 0.0; - const float x = LOGICAL_X_POSITION(pgm_read_float(&(ubl.mesh_index_to_xpos[current_xi]))); + const float x = LOGICAL_X_POSITION(pgm_read_float(&ubl.mesh_index_to_xpos[current_xi])); /** * Without this check, it is possible for the algorithm to generate a zero length move in the case @@ -393,8 +393,8 @@ while (xi_cnt > 0 || yi_cnt > 0) { - const float next_mesh_line_x = LOGICAL_X_POSITION(pgm_read_float(&(ubl.mesh_index_to_xpos[current_xi + dxi]))), - next_mesh_line_y = LOGICAL_Y_POSITION(pgm_read_float(&(ubl.mesh_index_to_ypos[current_yi + dyi]))), + const float next_mesh_line_x = LOGICAL_X_POSITION(pgm_read_float(&ubl.mesh_index_to_xpos[current_xi + dxi])), + next_mesh_line_y = LOGICAL_Y_POSITION(pgm_read_float(&ubl.mesh_index_to_ypos[current_yi + dyi])), y = m * next_mesh_line_x + c, // Calculate Y at the next X mesh line x = (next_mesh_line_y - c) / m; // Calculate X at the next Y mesh line // (No need to worry about m being zero.