diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index 0a0d35fca..1a02a1337 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -432,214 +432,264 @@ void MarlinSettings::postprocess() { const uint8_t esteppers = COUNT(planner.settings.axis_steps_per_mm) - XYZ; EEPROM_WRITE(esteppers); - EEPROM_WRITE(planner.settings); + // + // Planner Motion + // + { + EEPROM_WRITE(planner.settings); - #if HAS_CLASSIC_JERK - EEPROM_WRITE(planner.max_jerk); - #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE) - dummy = float(DEFAULT_EJERK); - EEPROM_WRITE(dummy); + #if HAS_CLASSIC_JERK + EEPROM_WRITE(planner.max_jerk); + #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE) + dummy = float(DEFAULT_EJERK); + EEPROM_WRITE(dummy); + #endif + #else + const float planner_max_jerk[XYZE] = { float(DEFAULT_XJERK), float(DEFAULT_YJERK), float(DEFAULT_ZJERK), float(DEFAULT_EJERK) }; + EEPROM_WRITE(planner_max_jerk); #endif - #else - const float planner_max_jerk[XYZE] = { float(DEFAULT_XJERK), float(DEFAULT_YJERK), float(DEFAULT_ZJERK), float(DEFAULT_EJERK) }; - EEPROM_WRITE(planner_max_jerk); - #endif - #if ENABLED(JUNCTION_DEVIATION) - EEPROM_WRITE(planner.junction_deviation_mm); - #else - dummy = 0.02f; - EEPROM_WRITE(dummy); - #endif + #if ENABLED(JUNCTION_DEVIATION) + EEPROM_WRITE(planner.junction_deviation_mm); + #else + dummy = 0.02f; + EEPROM_WRITE(dummy); + #endif + } - _FIELD_TEST(home_offset); + // + // Home Offset + // + { + _FIELD_TEST(home_offset); - #if HAS_SCARA_OFFSET - EEPROM_WRITE(scara_home_offset); - #else - #if !HAS_HOME_OFFSET - const float home_offset[XYZ] = { 0 }; + #if HAS_SCARA_OFFSET + EEPROM_WRITE(scara_home_offset); + #else + #if !HAS_HOME_OFFSET + const float home_offset[XYZ] = { 0 }; + #endif + EEPROM_WRITE(home_offset); #endif - EEPROM_WRITE(home_offset); - #endif - #if HAS_HOTEND_OFFSET - // Skip hotend 0 which must be 0 - for (uint8_t e = 1; e < HOTENDS; e++) - LOOP_XYZ(i) EEPROM_WRITE(hotend_offset[i][e]); - #endif + #if HAS_HOTEND_OFFSET + // Skip hotend 0 which must be 0 + for (uint8_t e = 1; e < HOTENDS; e++) + LOOP_XYZ(i) EEPROM_WRITE(hotend_offset[i][e]); + #endif + } // // Global Leveling // + { + const float zfh = ( + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + planner.z_fade_height + #else + 10.0 + #endif + ); + EEPROM_WRITE(zfh); + } - const float zfh = ( - #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - planner.z_fade_height - #else - 10.0 + // + // Mesh Bed Leveling + // + { + #if ENABLED(MESH_BED_LEVELING) + // Compile time test that sizeof(mbl.z_values) is as expected + static_assert( + sizeof(mbl.z_values) == (GRID_MAX_POINTS) * sizeof(mbl.z_values[0][0]), + "MBL Z array is the wrong size." + ); + const uint8_t mesh_num_x = GRID_MAX_POINTS_X, mesh_num_y = GRID_MAX_POINTS_Y; + EEPROM_WRITE(mbl.z_offset); + EEPROM_WRITE(mesh_num_x); + EEPROM_WRITE(mesh_num_y); + EEPROM_WRITE(mbl.z_values); + #else // For disabled MBL write a default mesh + dummy = 0; + const uint8_t mesh_num_x = 3, mesh_num_y = 3; + EEPROM_WRITE(dummy); // z_offset + EEPROM_WRITE(mesh_num_x); + EEPROM_WRITE(mesh_num_y); + for (uint8_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_WRITE(dummy); #endif - ); - EEPROM_WRITE(zfh); + } // - // Mesh Bed Leveling + // Probe Z Offset // + { + _FIELD_TEST(zprobe_zoffset); - #if ENABLED(MESH_BED_LEVELING) - // Compile time test that sizeof(mbl.z_values) is as expected - static_assert( - sizeof(mbl.z_values) == (GRID_MAX_POINTS) * sizeof(mbl.z_values[0][0]), - "MBL Z array is the wrong size." - ); - const uint8_t mesh_num_x = GRID_MAX_POINTS_X, mesh_num_y = GRID_MAX_POINTS_Y; - EEPROM_WRITE(mbl.z_offset); - EEPROM_WRITE(mesh_num_x); - EEPROM_WRITE(mesh_num_y); - EEPROM_WRITE(mbl.z_values); - #else // For disabled MBL write a default mesh - dummy = 0; - const uint8_t mesh_num_x = 3, mesh_num_y = 3; - EEPROM_WRITE(dummy); // z_offset - EEPROM_WRITE(mesh_num_x); - EEPROM_WRITE(mesh_num_y); - for (uint8_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_WRITE(dummy); - #endif // MESH_BED_LEVELING - - _FIELD_TEST(zprobe_zoffset); - - #if !HAS_BED_PROBE - const float zprobe_zoffset = 0; - #endif - EEPROM_WRITE(zprobe_zoffset); + #if !HAS_BED_PROBE + const float zprobe_zoffset = 0; + #endif + EEPROM_WRITE(zprobe_zoffset); + } // // Planar Bed Leveling matrix // - - #if ABL_PLANAR - EEPROM_WRITE(planner.bed_level_matrix); - #else - dummy = 0; - for (uint8_t q = 9; q--;) EEPROM_WRITE(dummy); - #endif + { + #if ABL_PLANAR + EEPROM_WRITE(planner.bed_level_matrix); + #else + dummy = 0; + for (uint8_t q = 9; q--;) EEPROM_WRITE(dummy); + #endif + } // // Bilinear Auto Bed Leveling // + { + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + // Compile time test that sizeof(z_values) is as expected + static_assert( + sizeof(z_values) == (GRID_MAX_POINTS) * sizeof(z_values[0][0]), + "Bilinear Z array is the wrong size." + ); + const uint8_t grid_max_x = GRID_MAX_POINTS_X, grid_max_y = GRID_MAX_POINTS_Y; + EEPROM_WRITE(grid_max_x); // 1 byte + EEPROM_WRITE(grid_max_y); // 1 byte + EEPROM_WRITE(bilinear_grid_spacing); // 2 ints + EEPROM_WRITE(bilinear_start); // 2 ints + EEPROM_WRITE(z_values); // 9-256 floats + #else + // For disabled Bilinear Grid write an empty 3x3 grid + const uint8_t grid_max_x = 3, grid_max_y = 3; + const int bilinear_start[2] = { 0 }, bilinear_grid_spacing[2] = { 0 }; + dummy = 0; + EEPROM_WRITE(grid_max_x); + EEPROM_WRITE(grid_max_y); + EEPROM_WRITE(bilinear_grid_spacing); + EEPROM_WRITE(bilinear_start); + for (uint16_t q = grid_max_x * grid_max_y; q--;) EEPROM_WRITE(dummy); + #endif + } - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - // Compile time test that sizeof(z_values) is as expected - static_assert( - sizeof(z_values) == (GRID_MAX_POINTS) * sizeof(z_values[0][0]), - "Bilinear Z array is the wrong size." - ); - const uint8_t grid_max_x = GRID_MAX_POINTS_X, grid_max_y = GRID_MAX_POINTS_Y; - EEPROM_WRITE(grid_max_x); // 1 byte - EEPROM_WRITE(grid_max_y); // 1 byte - EEPROM_WRITE(bilinear_grid_spacing); // 2 ints - EEPROM_WRITE(bilinear_start); // 2 ints - EEPROM_WRITE(z_values); // 9-256 floats - #else - // For disabled Bilinear Grid write an empty 3x3 grid - const uint8_t grid_max_x = 3, grid_max_y = 3; - const int bilinear_start[2] = { 0 }, bilinear_grid_spacing[2] = { 0 }; - dummy = 0; - EEPROM_WRITE(grid_max_x); - EEPROM_WRITE(grid_max_y); - EEPROM_WRITE(bilinear_grid_spacing); - EEPROM_WRITE(bilinear_start); - for (uint16_t q = grid_max_x * grid_max_y; q--;) EEPROM_WRITE(dummy); - #endif // AUTO_BED_LEVELING_BILINEAR - - _FIELD_TEST(planner_leveling_active); - - #if ENABLED(AUTO_BED_LEVELING_UBL) - EEPROM_WRITE(planner.leveling_active); - EEPROM_WRITE(ubl.storage_slot); - #else - const bool ubl_active = false; - const int8_t storage_slot = -1; - EEPROM_WRITE(ubl_active); - EEPROM_WRITE(storage_slot); - #endif // AUTO_BED_LEVELING_UBL + // + // Unified Bed Leveling + // + { + _FIELD_TEST(planner_leveling_active); + + #if ENABLED(AUTO_BED_LEVELING_UBL) + EEPROM_WRITE(planner.leveling_active); + EEPROM_WRITE(ubl.storage_slot); + #else + const bool ubl_active = false; + const int8_t storage_slot = -1; + EEPROM_WRITE(ubl_active); + EEPROM_WRITE(storage_slot); + #endif // AUTO_BED_LEVELING_UBL + } + + // + // Servo Angles + // + { + #if !(HAS_SERVOS && ENABLED(EDITABLE_SERVO_ANGLES)) + + uint16_t servo_angles[NUM_SERVOS][2] = { { 0, 0 } }; - #if !HAS_SERVOS || DISABLED(EDITABLE_SERVO_ANGLES) - #if ENABLED(SWITCHING_EXTRUDER) - constexpr uint16_t sesa[][2] = SWITCHING_EXTRUDER_SERVO_ANGLES; - #endif - constexpr uint16_t servo_angles[NUM_SERVOS][2] = { #if ENABLED(SWITCHING_EXTRUDER) - [SWITCHING_EXTRUDER_SERVO_NR] = { sesa[0][0], sesa[0][1] } + + constexpr uint16_t sesa[][2] = SWITCHING_EXTRUDER_SERVO_ANGLES; + servo_angles[SWITCHING_EXTRUDER_SERVO_NR][0] = sesa[0][0]; + servo_angles[SWITCHING_EXTRUDER_SERVO_NR][1] = sesa[0][1]; #if EXTRUDERS > 3 - , [SWITCHING_EXTRUDER_E23_SERVO_NR] = { sesa[1][0], sesa[1][1] } + servo_angles[SWITCHING_EXTRUDER_E23_SERVO_NR][0] = sesa[1][0]; + servo_angles[SWITCHING_EXTRUDER_E23_SERVO_NR][1] = sesa[1][1]; #endif + #elif ENABLED(SWITCHING_NOZZLE) - [SWITCHING_NOZZLE_SERVO_NR] = SWITCHING_NOZZLE_SERVO_ANGLES + + constexpr uint16_t snsa[] = SWITCHING_NOZZLE_SERVO_ANGLES; + servo_angles[SWITCHING_NOZZLE_SERVO_NR][0] = snsa[0]; + servo_angles[SWITCHING_NOZZLE_SERVO_NR][1] = snsa[1]; + #elif defined(Z_SERVO_ANGLES) && defined(Z_PROBE_SERVO_NR) - [Z_PROBE_SERVO_NR] = Z_SERVO_ANGLES + + constexpr uint16_t zsa[] = Z_SERVO_ANGLES; + servo_angles[Z_PROBE_SERVO_NR][0] = zsa[0]; + servo_angles[Z_PROBE_SERVO_NR][1] = zsa[1]; + #endif - }; - #endif - EEPROM_WRITE(servo_angles); + #endif // !HAS_SERVOS || !EDITABLE_SERVO_ANGLES - // 11 floats for DELTA / [XYZ]_DUAL_ENDSTOPS - #if ENABLED(DELTA) + EEPROM_WRITE(servo_angles); + } - _FIELD_TEST(delta_height); + // + // DELTA Geometry or Dual Endstops offsets + // + { + #if ENABLED(DELTA) - EEPROM_WRITE(delta_height); // 1 float - EEPROM_WRITE(delta_endstop_adj); // 3 floats - EEPROM_WRITE(delta_radius); // 1 float - EEPROM_WRITE(delta_diagonal_rod); // 1 float - EEPROM_WRITE(delta_segments_per_second); // 1 float - EEPROM_WRITE(delta_calibration_radius); // 1 float - EEPROM_WRITE(delta_tower_angle_trim); // 3 floats + _FIELD_TEST(delta_height); - #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS + EEPROM_WRITE(delta_height); // 1 float + EEPROM_WRITE(delta_endstop_adj); // 3 floats + EEPROM_WRITE(delta_radius); // 1 float + EEPROM_WRITE(delta_diagonal_rod); // 1 float + EEPROM_WRITE(delta_segments_per_second); // 1 float + EEPROM_WRITE(delta_calibration_radius); // 1 float + EEPROM_WRITE(delta_tower_angle_trim); // 3 floats - _FIELD_TEST(x2_endstop_adj); + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS - // Write dual endstops in X, Y, Z order. Unused = 0.0 - dummy = 0; - #if ENABLED(X_DUAL_ENDSTOPS) - EEPROM_WRITE(endstops.x2_endstop_adj); // 1 float - #else - EEPROM_WRITE(dummy); - #endif + _FIELD_TEST(x2_endstop_adj); - #if ENABLED(Y_DUAL_ENDSTOPS) - EEPROM_WRITE(endstops.y2_endstop_adj); // 1 float - #else - EEPROM_WRITE(dummy); - #endif + // Write dual endstops in X, Y, Z order. Unused = 0.0 + dummy = 0; + #if ENABLED(X_DUAL_ENDSTOPS) + EEPROM_WRITE(endstops.x2_endstop_adj); // 1 float + #else + EEPROM_WRITE(dummy); + #endif - #if Z_MULTI_ENDSTOPS - EEPROM_WRITE(endstops.z2_endstop_adj); // 1 float - #else - EEPROM_WRITE(dummy); - #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + EEPROM_WRITE(endstops.y2_endstop_adj); // 1 float + #else + EEPROM_WRITE(dummy); + #endif - #if ENABLED(Z_TRIPLE_ENDSTOPS) - EEPROM_WRITE(endstops.z3_endstop_adj); // 1 float - #else - EEPROM_WRITE(dummy); - #endif + #if Z_MULTI_ENDSTOPS + EEPROM_WRITE(endstops.z2_endstop_adj); // 1 float + #else + EEPROM_WRITE(dummy); + #endif - #endif + #if ENABLED(Z_TRIPLE_ENDSTOPS) + EEPROM_WRITE(endstops.z3_endstop_adj); // 1 float + #else + EEPROM_WRITE(dummy); + #endif - _FIELD_TEST(lcd_preheat_hotend_temp); + #endif + } - #if DISABLED(ULTIPANEL) - constexpr int16_t lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND }, - lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED }; - constexpr uint8_t lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED }; - #endif + // + // LCD Preheat settings + // + { + _FIELD_TEST(lcd_preheat_hotend_temp); - EEPROM_WRITE(lcd_preheat_hotend_temp); - EEPROM_WRITE(lcd_preheat_bed_temp); - EEPROM_WRITE(lcd_preheat_fan_speed); + #if DISABLED(ULTIPANEL) + constexpr int16_t lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND }, + lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED }; + constexpr uint8_t lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED }; + #endif + + EEPROM_WRITE(lcd_preheat_hotend_temp); + EEPROM_WRITE(lcd_preheat_bed_temp); + EEPROM_WRITE(lcd_preheat_fan_speed); + } // // PIDTEMP @@ -678,13 +728,14 @@ void MarlinSettings::postprocess() { // // LCD Contrast // + { + _FIELD_TEST(lcd_contrast); - _FIELD_TEST(lcd_contrast); - - #if !HAS_LCD_CONTRAST - const int16_t lcd_contrast = 32; - #endif - EEPROM_WRITE(lcd_contrast); + #if !HAS_LCD_CONTRAST + const int16_t lcd_contrast = 32; + #endif + EEPROM_WRITE(lcd_contrast); + } // // Firmware Retraction @@ -1199,7 +1250,7 @@ void MarlinSettings::postprocess() { // SERVO_ANGLES // { - #if !HAS_SERVOS || DISABLED(EDITABLE_SERVO_ANGLES) + #if !(HAS_SERVOS && ENABLED(EDITABLE_SERVO_ANGLES)) uint16_t servo_angles[NUM_SERVOS][2]; #endif EEPROM_READ(servo_angles); @@ -1894,26 +1945,26 @@ void MarlinSettings::reset(PORTARG_SOLO) { #else #define REQ_ANGLES 2 #endif - constexpr uint16_t extruder_angles[] = SWITCHING_EXTRUDER_SERVO_ANGLES; - static_assert(COUNT(extruder_angles) == REQ_ANGLES, "SWITCHING_EXTRUDER_SERVO_ANGLES needs " STRINGIFY(REQ_ANGLES) " angles."); - servo_angles[SWITCHING_EXTRUDER_SERVO_NR][0] = extruder_angles[0]; - servo_angles[SWITCHING_EXTRUDER_SERVO_NR][1] = extruder_angles[1]; + constexpr uint16_t sesa[] = SWITCHING_EXTRUDER_SERVO_ANGLES; + static_assert(COUNT(sesa) == REQ_ANGLES, "SWITCHING_EXTRUDER_SERVO_ANGLES needs " STRINGIFY(REQ_ANGLES) " angles."); + servo_angles[SWITCHING_EXTRUDER_SERVO_NR][0] = sesa[0]; + servo_angles[SWITCHING_EXTRUDER_SERVO_NR][1] = sesa[1]; #if EXTRUDERS > 3 - servo_angles[SWITCHING_EXTRUDER_E23_SERVO_NR][0] = extruder_angles[2]; - servo_angles[SWITCHING_EXTRUDER_E23_SERVO_NR][1] = extruder_angles[3]; + servo_angles[SWITCHING_EXTRUDER_E23_SERVO_NR][0] = sesa[2]; + servo_angles[SWITCHING_EXTRUDER_E23_SERVO_NR][1] = sesa[3]; #endif #elif ENABLED(SWITCHING_NOZZLE) - constexpr uint16_t nozzle_angles[2] = SWITCHING_NOZZLE_SERVO_ANGLES; - servo_angles[SWITCHING_NOZZLE_SERVO_NR][0] = nozzle_angles[0]; - servo_angles[SWITCHING_NOZZLE_SERVO_NR][1] = nozzle_angles[1]; + constexpr uint16_t snsa[2] = SWITCHING_NOZZLE_SERVO_ANGLES; + servo_angles[SWITCHING_NOZZLE_SERVO_NR][0] = snsa[0]; + servo_angles[SWITCHING_NOZZLE_SERVO_NR][1] = snsa[1]; #elif defined(Z_SERVO_ANGLES) && defined(Z_PROBE_SERVO_NR) - constexpr uint16_t z_probe_angles[2] = Z_SERVO_ANGLES; - servo_angles[Z_PROBE_SERVO_NR][0] = z_probe_angles[0]; - servo_angles[Z_PROBE_SERVO_NR][1] = z_probe_angles[1]; + constexpr uint16_t zsa[2] = Z_SERVO_ANGLES; + servo_angles[Z_PROBE_SERVO_NR][0] = zsa[0]; + servo_angles[Z_PROBE_SERVO_NR][1] = zsa[1]; #endif