diff --git a/Marlin/src/gcode/geometry/G92.cpp b/Marlin/src/gcode/geometry/G92.cpp
index 0b10aab5b..933a6e1cd 100644
--- a/Marlin/src/gcode/geometry/G92.cpp
+++ b/Marlin/src/gcode/geometry/G92.cpp
@@ -33,8 +33,6 @@
  */
 void GcodeSuite::G92() {
 
-  stepper.synchronize();
-
   #if ENABLED(CNC_COORDINATE_SYSTEMS)
     switch (parser.subcode) {
       case 1:
@@ -94,10 +92,8 @@ void GcodeSuite::G92() {
       COPY(coordinate_system[active_coordinate_system], position_shift);
   #endif
 
-  if (didXYZ)
-    SYNC_PLAN_POSITION_KINEMATIC();
-  else if (didE)
-    sync_plan_position_e();
+  if    (didXYZ) SYNC_PLAN_POSITION_KINEMATIC();
+  else if (didE) sync_plan_position_e();
 
   report_current_position();
 }
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index 8aa08cd54..4be4b2af5 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -1382,15 +1382,9 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE]
   const float esteps_float = de * e_factor[extruder];
   const int32_t esteps = abs(esteps_float) + 0.5;
 
-  // Calculate the buffer head after we push this byte
-  const uint8_t next_buffer_head = next_block_index(block_buffer_head);
-
-  // If the buffer is full: good! That means we are well ahead of the robot.
-  // Rest here until there is room in the buffer.
-  while (block_buffer_tail == next_buffer_head) idle();
-
-  // Prepare to set up new block
-  block_t* block = &block_buffer[block_buffer_head];
+  // Wait for the next available block
+  uint8_t next_buffer_head;
+  block_t * const block = get_next_free_block(next_buffer_head);
 
   // Clear all flags, including the "busy" bit
   block->flag = 0x00;
@@ -2032,6 +2026,26 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE]
 
 } // _buffer_steps()
 
+/**
+ * Planner::buffer_sync_block
+ * Add a block to the buffer that just updates the position
+ */
+void Planner::buffer_sync_block() {
+  // Wait for the next available block
+  uint8_t next_buffer_head;
+  block_t * const block = get_next_free_block(next_buffer_head);
+
+  block->steps[A_AXIS] = position[A_AXIS];
+  block->steps[B_AXIS] = position[B_AXIS];
+  block->steps[C_AXIS] = position[C_AXIS];
+  block->steps[E_AXIS] = position[E_AXIS];
+
+  block->flag = BLOCK_FLAG_SYNC_POSITION;
+
+  block_buffer_head = next_buffer_head;
+  stepper.wake_up();
+} // buffer_sync_block()
+
 /**
  * Planner::buffer_segment
  *
@@ -2160,19 +2174,19 @@ void Planner::_set_position_mm(const float &a, const float &b, const float &c, c
   #else
     #define _EINDEX E_AXIS
   #endif
-  const int32_t na = position[A_AXIS] = LROUND(a * axis_steps_per_mm[A_AXIS]),
-                nb = position[B_AXIS] = LROUND(b * axis_steps_per_mm[B_AXIS]),
-                nc = position[C_AXIS] = LROUND(c * axis_steps_per_mm[C_AXIS]),
-                ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]);
+  position[A_AXIS] = LROUND(a * axis_steps_per_mm[A_AXIS]),
+  position[B_AXIS] = LROUND(b * axis_steps_per_mm[B_AXIS]),
+  position[C_AXIS] = LROUND(c * axis_steps_per_mm[C_AXIS]),
+  position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]);
   #if HAS_POSITION_FLOAT
-    position_float[X_AXIS] = a;
-    position_float[Y_AXIS] = b;
-    position_float[Z_AXIS] = c;
+    position_float[A_AXIS] = a;
+    position_float[B_AXIS] = b;
+    position_float[C_AXIS] = c;
     position_float[E_AXIS] = e;
   #endif
-  stepper.set_position(na, nb, nc, ne);
   previous_nominal_speed = 0.0; // Resets planner junction speeds. Assumes start from rest.
   ZERO(previous_speed);
+  buffer_sync_block();
 }
 
 void Planner::set_position_mm_kinematic(const float (&cart)[XYZE]) {
@@ -2220,23 +2234,23 @@ void Planner::set_position_mm(const AxisEnum axis, const float &v) {
   #if HAS_POSITION_FLOAT
     position_float[axis] = v;
   #endif
-  stepper.set_position(axis, position[axis]);
   previous_speed[axis] = 0.0;
+  buffer_sync_block();
 }
 
 // Recalculate the steps/s^2 acceleration rates, based on the mm/s^2
 void Planner::reset_acceleration_rates() {
   #if ENABLED(DISTINCT_E_FACTORS)
-    #define HIGHEST_CONDITION (i < E_AXIS || i == E_AXIS + active_extruder)
+    #define AXIS_CONDITION (i < E_AXIS || i == E_AXIS + active_extruder)
   #else
-    #define HIGHEST_CONDITION true
+    #define AXIS_CONDITION true
   #endif
   uint32_t highest_rate = 1;
   LOOP_XYZE_N(i) {
     max_acceleration_steps_per_s2[i] = max_acceleration_mm_per_s2[i] * axis_steps_per_mm[i];
-    if (HIGHEST_CONDITION) NOLESS(highest_rate, max_acceleration_steps_per_s2[i]);
+    if (AXIS_CONDITION) NOLESS(highest_rate, max_acceleration_steps_per_s2[i]);
   }
-  cutoff_long = 4294967295UL / highest_rate;
+  cutoff_long = 4294967295UL / highest_rate; // 0xFFFFFFFFUL
 }
 
 // Recalculate position, steps_to_mm if axis_steps_per_mm changes!
diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h
index 031cee745..eceb31f3a 100644
--- a/Marlin/src/module/planner.h
+++ b/Marlin/src/module/planner.h
@@ -57,14 +57,18 @@ enum BlockFlagBit : char {
   BLOCK_BIT_BUSY,
 
   // The block is segment 2+ of a longer move
-  BLOCK_BIT_CONTINUED
+  BLOCK_BIT_CONTINUED,
+
+  // Sync the stepper counts from the block
+  BLOCK_BIT_SYNC_POSITION
 };
 
 enum BlockFlag : char {
   BLOCK_FLAG_RECALCULATE          = _BV(BLOCK_BIT_RECALCULATE),
   BLOCK_FLAG_NOMINAL_LENGTH       = _BV(BLOCK_BIT_NOMINAL_LENGTH),
   BLOCK_FLAG_BUSY                 = _BV(BLOCK_BIT_BUSY),
-  BLOCK_FLAG_CONTINUED            = _BV(BLOCK_BIT_CONTINUED)
+  BLOCK_FLAG_CONTINUED            = _BV(BLOCK_BIT_CONTINUED),
+  BLOCK_FLAG_SYNC_POSITION        = _BV(BLOCK_BIT_SYNC_POSITION)
 };
 
 /**
@@ -422,6 +426,20 @@ class Planner {
 
     #endif
 
+
+    /**
+     * Planner::get_next_free_block
+     *
+     * - Get the next head index (passed by reference)
+     * - Wait for a space to open up in the planner
+     * - Return the head block
+     */
+    FORCE_INLINE static block_t* get_next_free_block(uint8_t &next_buffer_head) {
+      next_buffer_head = next_block_index(block_buffer_head);
+      while (block_buffer_tail == next_buffer_head) idle(); // while (is_full)
+      return &block_buffer[block_buffer_head];
+    }
+
     /**
      * Planner::_buffer_steps
      *
@@ -439,6 +457,12 @@ class Planner {
       , float fr_mm_s, const uint8_t extruder, const float &millimeters=0.0
     );
 
+    /**
+     * Planner::buffer_sync_block
+     * Add a block to the buffer that just updates the position
+     */
+    static void buffer_sync_block();
+
     /**
      * Planner::buffer_segment
      *
@@ -518,7 +542,7 @@ class Planner {
     static void set_position_mm_kinematic(const float (&cart)[XYZE]);
     static void set_position_mm(const AxisEnum axis, const float &v);
     FORCE_INLINE static void set_z_position_mm(const float &z) { set_position_mm(Z_AXIS, z); }
-    FORCE_INLINE static void set_e_position_mm(const float &e) { set_position_mm(AxisEnum(E_AXIS), e); }
+    FORCE_INLINE static void set_e_position_mm(const float &e) { set_position_mm(E_AXIS, e); }
 
     /**
      * Sync from the stepper positions. (e.g., after an interrupted move)
@@ -528,7 +552,7 @@ class Planner {
     /**
      * Does the buffer have any blocks queued?
      */
-    static bool has_blocks_queued() { return (block_buffer_head != block_buffer_tail); }
+    FORCE_INLINE static bool has_blocks_queued() { return (block_buffer_head != block_buffer_tail); }
 
     /**
      * "Discard" the block and "release" the memory.
diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp
index ec547c598..4e6747a12 100644
--- a/Marlin/src/module/stepper.cpp
+++ b/Marlin/src/module/stepper.cpp
@@ -1217,6 +1217,16 @@ void Stepper::isr() {
     // Anything in the buffer?
     if ((current_block = planner.get_current_block())) {
 
+      // Sync block? Sync the stepper counts and return
+      while (TEST(current_block->flag, BLOCK_BIT_SYNC_POSITION)) {
+        _set_position(
+          current_block->steps[A_AXIS], current_block->steps[B_AXIS],
+          current_block->steps[C_AXIS], current_block->steps[E_AXIS]
+        );
+        planner.discard_current_block();
+        if (!(current_block = planner.get_current_block())) return;
+      }
+
       // Initialize the trapezoid generator from the current block.
       static int8_t last_extruder = -1;
 
@@ -1976,12 +1986,7 @@ void Stepper::synchronize() { while (planner.has_blocks_queued() || cleaning_buf
  * This allows get_axis_position_mm to correctly
  * derive the current XYZ position later on.
  */
-void Stepper::set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e) {
-
-  synchronize(); // Bad to set stepper counts in the middle of a move
-
-  CRITICAL_SECTION_START;
-
+void Stepper::_set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e) {
   #if CORE_IS_XY
     // corexy positioning
     // these equations follow the form of the dA and dB equations on http://www.corexy.com/theory.html
@@ -2004,21 +2009,7 @@ void Stepper::set_position(const int32_t &a, const int32_t &b, const int32_t &c,
     count_position[Y_AXIS] = b;
     count_position[Z_AXIS] = c;
   #endif
-
-  count_position[E_AXIS] = e;
-  CRITICAL_SECTION_END;
-}
-
-void Stepper::set_position(const AxisEnum &axis, const int32_t &v) {
-  CRITICAL_SECTION_START;
-  count_position[axis] = v;
-  CRITICAL_SECTION_END;
-}
-
-void Stepper::set_e_position(const int32_t &e) {
-  CRITICAL_SECTION_START;
   count_position[E_AXIS] = e;
-  CRITICAL_SECTION_END;
 }
 
 /**
diff --git a/Marlin/src/module/stepper.h b/Marlin/src/module/stepper.h
index 5fad6a8f7..19bfeec68 100644
--- a/Marlin/src/module/stepper.h
+++ b/Marlin/src/module/stepper.h
@@ -191,9 +191,32 @@ class Stepper {
     //
     // Set the current position in steps
     //
-    static void set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e);
-    static void set_position(const AxisEnum &a, const int32_t &v);
-    static void set_e_position(const int32_t &e);
+    static void _set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e);
+
+    FORCE_INLINE static void _set_position(const AxisEnum a, const int32_t &v) { count_position[a] = v; }
+
+    FORCE_INLINE static void set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e) {
+      synchronize();
+      CRITICAL_SECTION_START;
+      _set_position(a, b, c, e);
+      CRITICAL_SECTION_END;
+    }
+
+    static void set_position(const AxisEnum a, const int32_t &v) {
+      synchronize();
+      CRITICAL_SECTION_START;
+      count_position[a] = v;
+      CRITICAL_SECTION_END;
+    }
+
+    FORCE_INLINE static void _set_e_position(const int32_t &e) { count_position[E_AXIS] = e; }
+
+    static void set_e_position(const int32_t &e) {
+      synchronize();
+      CRITICAL_SECTION_START;
+      count_position[E_AXIS] = e;
+      CRITICAL_SECTION_END;
+    }
 
     //
     // Set direction bits for all steppers