From ac71cdc265374717c067102b2bc22af002c86ee3 Mon Sep 17 00:00:00 2001 From: Lino Barreca Date: Wed, 13 Nov 2019 02:23:02 +0100 Subject: [PATCH] New HardwareTimer for STM32 5.7.0 (#15655) --- .travis.yml | 19 +- Marlin/src/HAL/HAL_ESP32/timers.h | 4 +- Marlin/src/HAL/HAL_SAMD51/timers.cpp | 2 +- Marlin/src/HAL/HAL_STM32/HAL.cpp | 14 + Marlin/src/HAL/HAL_STM32/SoftwareSerial.cpp | 391 ++++++++++++++++++ Marlin/src/HAL/HAL_STM32/SoftwareSerial.h | 119 ++++++ Marlin/src/HAL/HAL_STM32/timers.cpp | 102 +++-- Marlin/src/HAL/HAL_STM32/timers.h | 69 ++-- Marlin/src/HAL/HAL_STM32F1/timers.cpp | 4 +- Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h | 7 +- Marlin/src/HAL/HAL_TEENSY31_32/timers.cpp | 4 +- Marlin/src/HAL/HAL_TEENSY35_36/timers.cpp | 4 +- Marlin/src/module/stepper.cpp | 2 +- Marlin/src/module/temperature.cpp | 14 +- Marlin/src/module/temperature.h | 8 +- .../PlatformIO/boards/BigTree_Btt002.json | 6 +- .../PlatformIO/boards/BigTree_SKR_Pro.json | 6 +- .../PlatformIO/scripts/black_stm32f407vet6.py | 29 -- .../scripts/generic_create_variant.py | 2 - .../PeripheralPins.c | 273 ++++-------- .../PinNamesVar.h | 0 .../BIGTREE_SKR_PRO_1v1/hal_conf_extra.h | 52 +++ .../ldscript.ld | 3 - .../variant.cpp | 0 .../variant.h | 16 +- .../variants/MARLIN_F407VE/PeripheralPins.c | 204 ++++----- ...stm32f4xx_hal_conf.h => hal_conf_custom.h} | 109 ++--- .../variants/MARLIN_F407VE/ldscript.ld | 52 ++- .../variants/MARLIN_F407VE/variant.cpp | 84 +++- .../variants/MARLIN_F407VE/variant.h | 150 ++++++- platformio.ini | 59 +-- 31 files changed, 1289 insertions(+), 519 deletions(-) create mode 100644 Marlin/src/HAL/HAL_STM32/SoftwareSerial.cpp create mode 100644 Marlin/src/HAL/HAL_STM32/SoftwareSerial.h delete mode 100644 buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py rename buildroot/share/PlatformIO/variants/{BIGTREE_GENERIC_STM32F407_5X => BIGTREE_SKR_PRO_1v1}/PeripheralPins.c (54%) rename buildroot/share/PlatformIO/variants/{BIGTREE_GENERIC_STM32F407_5X => BIGTREE_SKR_PRO_1v1}/PinNamesVar.h (100%) create mode 100644 buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h rename buildroot/share/PlatformIO/variants/{BIGTREE_GENERIC_STM32F407_5X => BIGTREE_SKR_PRO_1v1}/ldscript.ld (99%) rename buildroot/share/PlatformIO/variants/{BIGTREE_GENERIC_STM32F407_5X => BIGTREE_SKR_PRO_1v1}/variant.cpp (100%) rename buildroot/share/PlatformIO/variants/{BIGTREE_GENERIC_STM32F407_5X => BIGTREE_SKR_PRO_1v1}/variant.h (96%) rename buildroot/share/PlatformIO/variants/MARLIN_F407VE/{stm32f4xx_hal_conf.h => hal_conf_custom.h} (83%) diff --git a/.travis.yml b/.travis.yml index b747ffe33..745023fc5 100644 --- a/.travis.yml +++ b/.travis.yml @@ -25,23 +25,27 @@ env: - TEST_PLATFORM="sanguino_atmega1284p" - TEST_PLATFORM="sanguino_atmega644p" - # Broken Extended STM32 Environments - #- TEST_PLATFORM="ARMED" - #- TEST_PLATFORM="BIGTREE_BTT002" - #- TEST_PLATFORM="BIGTREE_SKR_PRO" - # Extended STM32 Environments - TEST_PLATFORM="STM32F103RC_bigtree" + - TEST_PLATFORM="STM32F103RC_bigtree_USB" + - TEST_PLATFORM="STM32F103RC_fysetc" - TEST_PLATFORM="jgaurora_a5s_a1" - TEST_PLATFORM="STM32F103VE_longer" - TEST_PLATFORM="STM32F407VE_black" + - TEST_PLATFORM="BIGTREE_SKR_PRO" - TEST_PLATFORM="mks_robin" + - TEST_PLATFORM="ARMED" + + # STM32 with non-STM framework. both broken for now. they should use HAL_STM32 which is working. + #- TEST_PLATFORM="STM32F4" + #- TEST_PLATFORM="STM32F7" # Put lengthy tests last - TEST_PLATFORM="LPC1768" - TEST_PLATFORM="LPC1769" # Non-working environment tests + #- TEST_PLATFORM="BIGTREE_BTT002" this board isn't released yet. we need pinout to be sure about what we do #- TEST_PLATFORM="at90usb1286_cdc" #- TEST_PLATFORM="at90usb1286_dfu" #- TEST_PLATFORM="STM32F103CB_malyan" @@ -49,11 +53,6 @@ env: #- TEST_PLATFORM="mks_robin_mini" #- TEST_PLATFORM="mks_robin_nano" #- TEST_PLATFORM="SAMD51_grandcentral_m4" - #- TEST_PLATFORM="STM32F103RC_bigtree" - #- TEST_PLATFORM="STM32F103RC_bigtree_USB" - #- TEST_PLATFORM="STM32F103RC_fysetc" - #- TEST_PLATFORM="STM32F4" - #- TEST_PLATFORM="STM32F7" before_install: # diff --git a/Marlin/src/HAL/HAL_ESP32/timers.h b/Marlin/src/HAL/HAL_ESP32/timers.h index 4b01f4ba7..98e43a4a8 100644 --- a/Marlin/src/HAL/HAL_ESP32/timers.h +++ b/Marlin/src/HAL/HAL_ESP32/timers.h @@ -51,8 +51,8 @@ typedef uint64_t hal_timer_t; #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs // wrong would be 0.25 #else #define STEPPER_TIMER_PRESCALE 40 - #define STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) // frequency of stepper timer, 2MHz - #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs + #define STEPPER_TIMER_RATE ((HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE)) // frequency of stepper timer, 2MHz + #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs #endif #define STEP_TIMER_MIN_INTERVAL 8 // minimum time in µs between stepper interrupts diff --git a/Marlin/src/HAL/HAL_SAMD51/timers.cpp b/Marlin/src/HAL/HAL_SAMD51/timers.cpp index 63902c3c5..243404396 100644 --- a/Marlin/src/HAL/HAL_SAMD51/timers.cpp +++ b/Marlin/src/HAL/HAL_SAMD51/timers.cpp @@ -99,7 +99,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { SYNC(tc->COUNT32.SYNCBUSY.bit.CTRLB); // Set compare value - tc->COUNT32.COUNT.reg = tc->COUNT32.CC[0].reg = HAL_TIMER_RATE / frequency; + tc->COUNT32.COUNT.reg = tc->COUNT32.CC[0].reg = (HAL_TIMER_RATE) / frequency; // And start timer tc->COUNT32.CTRLA.bit.ENABLE = true; diff --git a/Marlin/src/HAL/HAL_STM32/HAL.cpp b/Marlin/src/HAL/HAL_STM32/HAL.cpp index edc161a5d..1d8eb4447 100644 --- a/Marlin/src/HAL/HAL_STM32/HAL.cpp +++ b/Marlin/src/HAL/HAL_STM32/HAL.cpp @@ -28,6 +28,16 @@ #include "../../inc/MarlinConfig.h" #include "../shared/Delay.h" +#if (__cplusplus == 201703L) && defined(__has_include) + #define HAS_SWSERIAL __has_include() +#else + #define HAS_SWSERIAL HAS_TMC220x +#endif + +#if HAS_SWSERIAL + #include "SoftwareSerial.h" +#endif + #if ENABLED(SRAM_EEPROM_EMULATION) #if STM32F7xx #include "stm32f7xx_ll_pwr.h" @@ -82,6 +92,10 @@ void HAL_init() { // Wait until backup regulator is initialized while (!LL_PWR_IsActiveFlag_BRR()); #endif // EEPROM_EMULATED_SRAM + + #if HAS_SWSERIAL + SoftwareSerial::setInterruptPriority(SWSERIAL_TIMER_IRQ_PRIO, 0); + #endif } void HAL_clear_reset_source() { __HAL_RCC_CLEAR_RESET_FLAGS(); } diff --git a/Marlin/src/HAL/HAL_STM32/SoftwareSerial.cpp b/Marlin/src/HAL/HAL_STM32/SoftwareSerial.cpp new file mode 100644 index 000000000..7ca1d4754 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/SoftwareSerial.cpp @@ -0,0 +1,391 @@ +/* + * SoftwareSerial.cpp (formerly NewSoftSerial.cpp) + * + * Multi-instance software serial library for Arduino/Wiring + * -- Interrupt-driven receive and other improvements by ladyada + * (http://ladyada.net) + * -- Tuning, circular buffer, derivation from class Print/Stream, + * multi-instance support, porting to 8MHz processors, + * various optimizations, PROGMEM delay tables, inverse logic and + * direct port writing by Mikal Hart (http://www.arduiniana.org) + * -- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com) + * -- 20MHz processor support by Garrett Mace (http://www.macetech.com) + * -- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/) + * -- STM32 support by Armin van der Togt + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * The latest version of this library can always be found at + * http://arduiniana.org. + */ + +// +// Includes +// +#include "SoftwareSerial.h" +#include + +#define OVERSAMPLE 3 // in RX, Timer will generate interruption OVERSAMPLE time during a bit. Thus OVERSAMPLE ticks in a bit. (interrupt not synchonized with edge). + +// defined in bit-periods +#define HALFDUPLEX_SWITCH_DELAY 5 +// It's best to define TIMER_SERIAL in variant.h. If not defined, we choose one here +// The order is based on (lack of) features and compare channels, we choose the simplest available +// because we only need an update interrupt +#if !defined(TIMER_SERIAL) +#if defined (TIM18_BASE) +#define TIMER_SERIAL TIM18 +#elif defined (TIM7_BASE) +#define TIMER_SERIAL TIM7 +#elif defined (TIM6_BASE) +#define TIMER_SERIAL TIM6 +#elif defined (TIM22_BASE) +#define TIMER_SERIAL TIM22 +#elif defined (TIM21_BASE) +#define TIMER_SERIAL TIM21 +#elif defined (TIM17_BASE) +#define TIMER_SERIAL TIM17 +#elif defined (TIM16_BASE) +#define TIMER_SERIAL TIM16 +#elif defined (TIM15_BASE) +#define TIMER_SERIAL TIM15 +#elif defined (TIM14_BASE) +#define TIMER_SERIAL TIM14 +#elif defined (TIM13_BASE) +#define TIMER_SERIAL TIM13 +#elif defined (TIM11_BASE) +#define TIMER_SERIAL TIM11 +#elif defined (TIM10_BASE) +#define TIMER_SERIAL TIM10 +#elif defined (TIM12_BASE) +#define TIMER_SERIAL TIM12 +#elif defined (TIM19_BASE) +#define TIMER_SERIAL TIM19 +#elif defined (TIM9_BASE) +#define TIMER_SERIAL TIM9 +#elif defined (TIM5_BASE) +#define TIMER_SERIAL TIM5 +#elif defined (TIM4_BASE) +#define TIMER_SERIAL TIM4 +#elif defined (TIM3_BASE) +#define TIMER_SERIAL TIM3 +#elif defined (TIM2_BASE) +#define TIMER_SERIAL TIM2 +#elif defined (TIM20_BASE) +#define TIMER_SERIAL TIM20 +#elif defined (TIM8_BASE) +#define TIMER_SERIAL TIM8 +#elif defined (TIM1_BASE) +#define TIMER_SERIAL TIM1 +#else +#error No suitable timer found for SoftwareSerial, define TIMER_SERIAL in variant.h +#endif +#endif +// +// Statics +// +HardwareTimer SoftwareSerial::timer(TIMER_SERIAL); +const IRQn_Type SoftwareSerial::timer_interrupt_number = static_cast(getTimerUpIrq(TIMER_SERIAL)); +uint32_t SoftwareSerial::timer_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), TIM_IRQ_PRIO, TIM_IRQ_SUBPRIO); +SoftwareSerial *SoftwareSerial::active_listener = nullptr; +SoftwareSerial *volatile SoftwareSerial::active_out = nullptr; +SoftwareSerial *volatile SoftwareSerial::active_in = nullptr; +int32_t SoftwareSerial::tx_tick_cnt = 0; // OVERSAMPLE ticks needed for a bit +int32_t volatile SoftwareSerial::rx_tick_cnt = 0; // OVERSAMPLE ticks needed for a bit +uint32_t SoftwareSerial::tx_buffer = 0; +int32_t SoftwareSerial::tx_bit_cnt = 0; +uint32_t SoftwareSerial::rx_buffer = 0; +int32_t SoftwareSerial::rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit +uint32_t SoftwareSerial::cur_speed = 0; + +void SoftwareSerial::setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority) { + timer_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), preemptPriority, subPriority); +} + +// +// Private methods +// + +void SoftwareSerial::setSpeed(uint32_t speed) { + if (speed != cur_speed) { + timer.pause(); + if (speed != 0) { + // Disable the timer + uint32_t clock_rate, cmp_value; + // Get timer clock + clock_rate = timer.getTimerClkFreq(); + int pre = 1; + // Calculate prescale an compare value + do { + cmp_value = clock_rate / (speed * OVERSAMPLE); + if (cmp_value >= UINT16_MAX) { + clock_rate /= 2; + pre *= 2; + } + } while (cmp_value >= UINT16_MAX); + timer.setPrescaleFactor(pre); + timer.setOverflow(cmp_value); + timer.setCount(0); + timer.attachInterrupt(&handleInterrupt); + timer.resume(); + NVIC_SetPriority(timer_interrupt_number, timer_interrupt_priority); + } + else + timer.detachInterrupt(); + cur_speed = speed; + } +} + +// This function sets the current object as the "listening" +// one and returns true if it replaces another +bool SoftwareSerial::listen() { + if (active_listener != this) { + // wait for any transmit to complete as we may change speed + while (active_out); + active_listener->stopListening(); + rx_tick_cnt = 1; // 1 : next interrupt will decrease rx_tick_cnt to 0 which means RX pin level will be considered. + rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit + setSpeed(_speed); + active_listener = this; + if (!_half_duplex) active_in = this; + return true; + } + return false; +} + +// Stop listening. Returns true if we were actually listening. +bool SoftwareSerial::stopListening() { + if (active_listener == this) { + // wait for any output to complete + while (active_out); + if (_half_duplex) setRXTX(false); + active_listener = nullptr; + active_in = nullptr; + // turn off ints + setSpeed(0); + return true; + } + return false; +} + +inline void SoftwareSerial::setTX() { + if (_inverse_logic) + LL_GPIO_ResetOutputPin(_transmitPinPort, _transmitPinNumber); + else + LL_GPIO_SetOutputPin(_transmitPinPort, _transmitPinNumber); + pinMode(_transmitPin, OUTPUT); +} + +inline void SoftwareSerial::setRX() { + pinMode(_receivePin, _inverse_logic ? INPUT_PULLDOWN : INPUT_PULLUP); // pullup for normal logic! +} + +inline void SoftwareSerial::setRXTX(bool input) { + if (_half_duplex) { + if (input) { + if (active_in != this) { + setRX(); + rx_bit_cnt = -1; // rx_bit_cnt = -1 : waiting for start bit + rx_tick_cnt = 2; // 2 : next interrupt will be discarded. 2 interrupts required to consider RX pin level + active_in = this; + } + } + else { + if (active_in == this) { + setTX(); + active_in = nullptr; + } + } + } +} + +inline void SoftwareSerial::send() { + if (--tx_tick_cnt <= 0) { // if tx_tick_cnt > 0 interrupt is discarded. Only when tx_tick_cnt reaches 0 is TX pin set. + if (tx_bit_cnt++ < 10) { // tx_bit_cnt < 10 transmission is not finished (10 = 1 start +8 bits + 1 stop) + // Send data (including start and stop bits) + if (tx_buffer & 1) + LL_GPIO_SetOutputPin(_transmitPinPort, _transmitPinNumber); + else + LL_GPIO_ResetOutputPin(_transmitPinPort, _transmitPinNumber); + tx_buffer >>= 1; + tx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks to send next bit + } + else { // Transmission finished + tx_tick_cnt = 1; + if (_output_pending) { + active_out = nullptr; + + // In half-duplex mode wait HALFDUPLEX_SWITCH_DELAY bit-periods after the byte has + // been transmitted before allowing the switch to RX mode + } + else if (tx_bit_cnt > 10 + OVERSAMPLE * HALFDUPLEX_SWITCH_DELAY) { + if (_half_duplex && active_listener == this) setRXTX(true); + active_out = nullptr; + } + } + } +} + +// +// The receive routine called by the interrupt handler +// +inline void SoftwareSerial::recv() { + if (--rx_tick_cnt <= 0) { // if rx_tick_cnt > 0 interrupt is discarded. Only when rx_tick_cnt reaches 0 is RX pin considered + bool inbit = LL_GPIO_IsInputPinSet(_receivePinPort, _receivePinNumber) ^ _inverse_logic; + if (rx_bit_cnt == -1) { // rx_bit_cnt = -1 : waiting for start bit + if (!inbit) { + // got start bit + rx_bit_cnt = 0; // rx_bit_cnt == 0 : start bit received + rx_tick_cnt = OVERSAMPLE + 1; // Wait 1 bit (OVERSAMPLE ticks) + 1 tick in order to sample RX pin in the middle of the edge (and not too close to the edge) + rx_buffer = 0; + } + else + rx_tick_cnt = 1; // Waiting for start bit, but wrong level. Wait for next Interrupt to check RX pin level + } + else if (rx_bit_cnt >= 8) { // rx_bit_cnt >= 8 : waiting for stop bit + if (inbit) { + // Stop-bit read complete. Add to buffer. + uint8_t next = (_receive_buffer_tail + 1) % _SS_MAX_RX_BUFF; + if (next != _receive_buffer_head) { + // save new data in buffer: tail points to byte destination + _receive_buffer[_receive_buffer_tail] = rx_buffer; // save new byte + _receive_buffer_tail = next; + } + else // rx_bit_cnt = x with x = [0..7] correspond to new bit x received + _buffer_overflow = true; + } + // Full trame received. Restart waiting for start bit at next interrupt + rx_tick_cnt = 1; + rx_bit_cnt = -1; + } + else { + // data bits + rx_buffer >>= 1; + if (inbit) rx_buffer |= 0x80; + rx_bit_cnt++; // Prepare for next bit + rx_tick_cnt = OVERSAMPLE; // Wait OVERSAMPLE ticks before sampling next bit + } + } +} + +// +// Interrupt handling +// + +/* static */ +inline void SoftwareSerial::handleInterrupt(HardwareTimer*) { + if (active_in) active_in->recv(); + if (active_out) active_out->send(); +} + +// +// Constructor +// +SoftwareSerial::SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic /* = false */) : + _receivePin(receivePin), + _transmitPin(transmitPin), + _receivePinPort(digitalPinToPort(receivePin)), + _receivePinNumber(STM_LL_GPIO_PIN(digitalPinToPinName(receivePin))), + _transmitPinPort(digitalPinToPort(transmitPin)), + _transmitPinNumber(STM_LL_GPIO_PIN(digitalPinToPinName(transmitPin))), + _speed(0), + _buffer_overflow(false), + _inverse_logic(inverse_logic), + _half_duplex(receivePin == transmitPin), + _output_pending(0), + _receive_buffer_tail(0), + _receive_buffer_head(0) +{ + if ((receivePin < NUM_DIGITAL_PINS) || (transmitPin < NUM_DIGITAL_PINS)) { + /* Enable GPIO clock for tx and rx pin*/ + set_GPIO_Port_Clock(STM_PORT(digitalPinToPinName(transmitPin))); + set_GPIO_Port_Clock(STM_PORT(digitalPinToPinName(receivePin))); + } + else + _Error_Handler("ERROR: invalid pin number\n", -1); +} + +// +// Destructor +// +SoftwareSerial::~SoftwareSerial() { end(); } + +// +// Public methods +// + +void SoftwareSerial::begin(long speed) { + #ifdef FORCE_BAUD_RATE + speed = FORCE_BAUD_RATE; + #endif + _speed = speed; + if (!_half_duplex) { + setTX(); + setRX(); + listen(); + } + else + setTX(); +} + +void SoftwareSerial::end() { + stopListening(); +} + +// Read data from buffer +int SoftwareSerial::read() { + // Empty buffer? + if (_receive_buffer_head == _receive_buffer_tail) return -1; + + // Read from "head" + uint8_t d = _receive_buffer[_receive_buffer_head]; // grab next byte + _receive_buffer_head = (_receive_buffer_head + 1) % _SS_MAX_RX_BUFF; + return d; +} + +int SoftwareSerial::available() { + return (_receive_buffer_tail + _SS_MAX_RX_BUFF - _receive_buffer_head) % _SS_MAX_RX_BUFF; +} + +size_t SoftwareSerial::write(uint8_t b) { + // wait for previous transmit to complete + _output_pending = 1; + while (active_out) { /* nada */ } + // add start and stop bits. + tx_buffer = b << 1 | 0x200; + if (_inverse_logic) tx_buffer = ~tx_buffer; + tx_bit_cnt = 0; + tx_tick_cnt = OVERSAMPLE; + setSpeed(_speed); + if (_half_duplex) setRXTX(false); + _output_pending = 0; + // make us active + active_out = this; + return 1; +} + +void SoftwareSerial::flush() { + noInterrupts(); + _receive_buffer_head = _receive_buffer_tail = 0; + interrupts(); +} + +int SoftwareSerial::peek() { + // Empty buffer? + if (_receive_buffer_head == _receive_buffer_tail) return -1; + + // Read from "head" + return _receive_buffer[_receive_buffer_head]; +} diff --git a/Marlin/src/HAL/HAL_STM32/SoftwareSerial.h b/Marlin/src/HAL/HAL_STM32/SoftwareSerial.h new file mode 100644 index 000000000..3799701cf --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/SoftwareSerial.h @@ -0,0 +1,119 @@ +/** + * SoftwareSerial.h (formerly NewSoftSerial.h) + * + * Multi-instance software serial library for Arduino/Wiring + * -- Interrupt-driven receive and other improvements by ladyada + * (http://ladyada.net) + * -- Tuning, circular buffer, derivation from class Print/Stream, + * multi-instance support, porting to 8MHz processors, + * various optimizations, PROGMEM delay tables, inverse logic and + * direct port writing by Mikal Hart (http://www.arduiniana.org) + * -- Pin change interrupt macros by Paul Stoffregen (http://www.pjrc.com) + * -- 20MHz processor support by Garrett Mace (http://www.macetech.com) + * -- ATmega1280/2560 support by Brett Hagman (http://www.roguerobotics.com/) + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * The latest version of this library can always be found at + * http://arduiniana.org. + */ + +#ifndef SOFTWARESERIAL_H +#define SOFTWARESERIAL_H + +#include + +/****************************************************************************** + * Definitions + ******************************************************************************/ + +#define _SS_MAX_RX_BUFF 64 // RX buffer size + +class SoftwareSerial : public Stream { + private: + // per object data + uint16_t _receivePin; + uint16_t _transmitPin; + GPIO_TypeDef *_receivePinPort; + uint32_t _receivePinNumber; + GPIO_TypeDef *_transmitPinPort; + uint32_t _transmitPinNumber; + uint32_t _speed; + + uint16_t _buffer_overflow: 1; + uint16_t _inverse_logic: 1; + uint16_t _half_duplex: 1; + uint16_t _output_pending: 1; + + unsigned char _receive_buffer[_SS_MAX_RX_BUFF]; + volatile uint8_t _receive_buffer_tail; + volatile uint8_t _receive_buffer_head; + + uint32_t delta_start = 0; + + // static data + static bool initialised; + static HardwareTimer timer; + static const IRQn_Type timer_interrupt_number; + static uint32_t timer_interrupt_priority; + static SoftwareSerial *active_listener; + static SoftwareSerial *volatile active_out; + static SoftwareSerial *volatile active_in; + static int32_t tx_tick_cnt; + static volatile int32_t rx_tick_cnt; + static uint32_t tx_buffer; + static int32_t tx_bit_cnt; + static uint32_t rx_buffer; + static int32_t rx_bit_cnt; + static uint32_t cur_speed; + + // private methods + void send(); + void recv(); + void setTX(); + void setRX(); + void setSpeed(uint32_t speed); + void setRXTX(bool input); + static void handleInterrupt(HardwareTimer *timer); + + public: + // public methods + + SoftwareSerial(uint16_t receivePin, uint16_t transmitPin, bool inverse_logic = false); + virtual ~SoftwareSerial(); + void begin(long speed); + bool listen(); + void end(); + bool isListening() { return active_listener == this; } + bool stopListening(); + bool overflow() { + bool ret = _buffer_overflow; + if (ret) _buffer_overflow = false; + return ret; + } + int peek(); + + virtual size_t write(uint8_t byte); + virtual int read(); + virtual int available(); + virtual void flush(); + operator bool() { return true; } + + static void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority); + + using Print::write; +}; + +#endif // SOFTWARESERIAL_H diff --git a/Marlin/src/HAL/HAL_STM32/timers.cpp b/Marlin/src/HAL/HAL_STM32/timers.cpp index 51f84e657..709c447b0 100644 --- a/Marlin/src/HAL/HAL_STM32/timers.cpp +++ b/Marlin/src/HAL/HAL_STM32/timers.cpp @@ -32,62 +32,108 @@ #define NUM_HARDWARE_TIMERS 2 +#define __TIMER_DEV(X) TIM##X +#define _TIMER_DEV(X) __TIMER_DEV(X) +#define STEP_TIMER_DEV _TIMER_DEV(STEP_TIMER) +#define TEMP_TIMER_DEV _TIMER_DEV(TEMP_TIMER) + // ------------------------ // Private Variables // ------------------------ -stm32_timer_t TimerHandle[NUM_HARDWARE_TIMERS]; +HardwareTimer *timer_instance[NUM_HARDWARE_TIMERS] = { NULL }; +bool timer_enabled[NUM_HARDWARE_TIMERS] = { false }; // ------------------------ // Public functions // ------------------------ -bool timers_initialized[NUM_HARDWARE_TIMERS] = { false }; - +// frequency is in Hertz void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { - - if (!timers_initialized[timer_num]) { - uint32_t step_prescaler = STEPPER_TIMER_PRESCALE - 1, - temp_prescaler = TEMP_TIMER_PRESCALE - 1; + if (!HAL_timer_initialized(timer_num)) { switch (timer_num) { + case STEP_TIMER_NUM: // STEPPER TIMER - use a 32bit timer if possible + timer_instance[timer_num] = new HardwareTimer(STEP_TIMER_DEV); + /* Set the prescaler to the final desired value. + * This will change the effective ISR callback frequency but when + * HAL_timer_start(timer_num=0) is called in the core for the first time + * the real frequency isn't important as long as, after boot, the ISR + * gets called with the correct prescaler and count register. So here + * we set the prescaler to the correct, final value and ignore the frequency + * asked. We will call back the ISR in 1 second to start at full speed. + * + * The proper fix, however, would be a correct initialization OR a + * HAL_timer_change(const uint8_t timer_num, const uint32_t frequency) + * which changes the prescaler when an IRQ frequency change is needed + * (for example when steppers are turned on) + */ + timer_instance[timer_num]->setPrescaleFactor(STEPPER_TIMER_PRESCALE); //the -1 is done internally + timer_instance[timer_num]->setOverflow(_MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE) /* /frequency */), TICK_FORMAT); + break; + case TEMP_TIMER_NUM: // TEMP TIMER - any available 16bit timer + timer_instance[timer_num] = new HardwareTimer(TEMP_TIMER_DEV); + // The prescale factor is computed automatically for HERTZ_FORMAT + timer_instance[timer_num]->setOverflow(frequency, HERTZ_FORMAT); + break; + } + + HAL_timer_enable_interrupt(timer_num); + + /* + * Initializes (and unfortunately starts) the timer. + * This is needed to set correct IRQ priority at the moment but causes + * no harm since every call to HAL_timer_start() is actually followed by + * a call to HAL_timer_enable_interrupt() which means that there isn't + * a case in which you want the timer to run without a callback. + */ + timer_instance[timer_num]->resume(); // First call to resume() MUST follow the attachInterrupt() + + // This is fixed in Arduino_Core_STM32 1.8. + // These calls can be removed and replaced with + // timer_instance[timer_num]->setInterruptPriority + switch (timer_num) { case STEP_TIMER_NUM: - // STEPPER TIMER - use a 32bit timer if possible - TimerHandle[timer_num].timer = STEP_TIMER_DEV; - TimerHandle[timer_num].irqHandle = Step_Handler; - TimerHandleInit(&TimerHandle[timer_num], (((HAL_TIMER_RATE) / step_prescaler) / frequency) - 1, step_prescaler); HAL_NVIC_SetPriority(STEP_TIMER_IRQ_NAME, STEP_TIMER_IRQ_PRIO, 0); break; - case TEMP_TIMER_NUM: - // TEMP TIMER - any available 16bit Timer - TimerHandle[timer_num].timer = TEMP_TIMER_DEV; - TimerHandle[timer_num].irqHandle = Temp_Handler; - TimerHandleInit(&TimerHandle[timer_num], (((HAL_TIMER_RATE) / temp_prescaler) / frequency) - 1, temp_prescaler); HAL_NVIC_SetPriority(TEMP_TIMER_IRQ_NAME, TEMP_TIMER_IRQ_PRIO, 0); break; } - timers_initialized[timer_num] = true; } } void HAL_timer_enable_interrupt(const uint8_t timer_num) { - const IRQn_Type IRQ_Id = IRQn_Type(getTimerIrq(TimerHandle[timer_num].timer)); - HAL_NVIC_EnableIRQ(IRQ_Id); + if (HAL_timer_initialized(timer_num) && !timer_enabled[timer_num]) { + timer_enabled[timer_num] = true; + switch (timer_num) { + case STEP_TIMER_NUM: + timer_instance[timer_num]->attachInterrupt(Step_Handler); + break; + case TEMP_TIMER_NUM: + timer_instance[timer_num]->attachInterrupt(Temp_Handler); + break; + } + } } void HAL_timer_disable_interrupt(const uint8_t timer_num) { - const IRQn_Type IRQ_Id = IRQn_Type(getTimerIrq(TimerHandle[timer_num].timer)); - HAL_NVIC_DisableIRQ(IRQ_Id); - - // We NEED memory barriers to ensure Interrupts are actually disabled! - // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the ) - __DSB(); - __ISB(); + if (HAL_timer_interrupt_enabled(timer_num)) { + timer_instance[timer_num]->detachInterrupt(); + timer_enabled[timer_num] = false; + } } bool HAL_timer_interrupt_enabled(const uint8_t timer_num) { - const uint32_t IRQ_Id = getTimerIrq(TimerHandle[timer_num].timer); - return NVIC->ISER[IRQ_Id >> 5] & _BV32(IRQ_Id & 0x1F); + return HAL_timer_initialized(timer_num) && timer_enabled[timer_num]; +} + +// Only for use within the HAL +TIM_TypeDef * HAL_timer_device(const uint8_t timer_num) { + switch (timer_num) { + case STEP_TIMER_NUM: return STEP_TIMER_DEV; + case TEMP_TIMER_NUM: return TEMP_TIMER_DEV; + } + return nullptr; } #endif // ARDUINO_ARCH_STM32 && !STM32GENERIC diff --git a/Marlin/src/HAL/HAL_STM32/timers.h b/Marlin/src/HAL/HAL_STM32/timers.h index aefe880b4..1d2c095f2 100644 --- a/Marlin/src/HAL/HAL_STM32/timers.h +++ b/Marlin/src/HAL/HAL_STM32/timers.h @@ -33,6 +33,7 @@ #define hal_timer_t uint32_t #define HAL_TIMER_TYPE_MAX 0xFFFFFFFF // Timers can be 16 or 32 bit + #ifdef STM32F0xx #define HAL_TIMER_RATE (F_CPU) // frequency of timer peripherals @@ -66,27 +67,30 @@ #endif #ifndef TEMP_TIMER - #define TEMP_TIMER 7 + #define TEMP_TIMER 14 // TIM7 is consumed by Software Serial if used. #endif #endif +#ifndef SWSERIAL_TIMER_IRQ_PRIO + #define SWSERIAL_TIMER_IRQ_PRIO 1 +#endif + #ifndef STEP_TIMER_IRQ_PRIO - #define STEP_TIMER_IRQ_PRIO 1 + #define STEP_TIMER_IRQ_PRIO 2 #endif #ifndef TEMP_TIMER_IRQ_PRIO - #define TEMP_TIMER_IRQ_PRIO 2 + #define TEMP_TIMER_IRQ_PRIO 14 //14 = after hardware ISRs #endif #define STEP_TIMER_NUM 0 // index of timer to use for stepper #define TEMP_TIMER_NUM 1 // index of timer to use for temperature #define PULSE_TIMER_NUM STEP_TIMER_NUM -#define TEMP_TIMER_RATE 72000 // 72 Khz -#define TEMP_TIMER_PRESCALE ((HAL_TIMER_RATE)/(TEMP_TIMER_RATE)) -#define TEMP_TIMER_FREQUENCY 1000 +#define TEMP_TIMER_FREQUENCY 1000 //Temperature::isr() is expected to be called at around 1kHz +//TODO: get rid of manual rate/prescale/ticks/cycles taken for procedures in stepper.cpp #define STEPPER_TIMER_RATE 2000000 // 2 Mhz #define STEPPER_TIMER_PRESCALE ((HAL_TIMER_RATE)/(STEPPER_TIMER_RATE)) #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs @@ -95,17 +99,6 @@ #define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE #define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US -#define __TIMER_DEV(X) TIM##X -#define _TIMER_DEV(X) __TIMER_DEV(X) -#define STEP_TIMER_DEV _TIMER_DEV(STEP_TIMER) -#define TEMP_TIMER_DEV _TIMER_DEV(TEMP_TIMER) - -#define __TIMER_CALLBACK(X) TIM##X##_IRQHandler -#define _TIMER_CALLBACK(X) __TIMER_CALLBACK(X) - -#define STEP_TIMER_CALLBACK _TIMER_CALLBACK(STEP_TIMER) -#define TEMP_TIMER_CALLBACK _TIMER_CALLBACK(TEMP_TIMER) - #define __TIMER_IRQ_NAME(X) TIM##X##_IRQn #define _TIMER_IRQ_NAME(X) __TIMER_IRQ_NAME(X) @@ -119,22 +112,16 @@ #define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM) #define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM) -extern void Step_Handler(stimer_t *htim); -extern void Temp_Handler(stimer_t *htim); -#define HAL_STEP_TIMER_ISR() void Step_Handler(stimer_t *htim) -#define HAL_TEMP_TIMER_ISR() void Temp_Handler(stimer_t *htim) - -// ------------------------ -// Types -// ------------------------ - -typedef stimer_t stm32_timer_t; +extern void Step_Handler(HardwareTimer *htim); +extern void Temp_Handler(HardwareTimer *htim); +#define HAL_STEP_TIMER_ISR() void Step_Handler(HardwareTimer *htim) +#define HAL_TEMP_TIMER_ISR() void Temp_Handler(HardwareTimer *htim) // ------------------------ // Public Variables // ------------------------ -extern stm32_timer_t TimerHandle[]; +extern HardwareTimer *timer_instance[]; // ------------------------ // Public functions @@ -145,18 +132,26 @@ void HAL_timer_enable_interrupt(const uint8_t timer_num); void HAL_timer_disable_interrupt(const uint8_t timer_num); bool HAL_timer_interrupt_enabled(const uint8_t timer_num); -FORCE_INLINE static uint32_t HAL_timer_get_count(const uint8_t timer_num) { - return __HAL_TIM_GET_COUNTER(&TimerHandle[timer_num].handle); -} +//TIM_TypeDef* HAL_timer_device(const uint8_t timer_num); no need to be public for now. not public = not used externally -FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const uint32_t compare) { - __HAL_TIM_SET_AUTORELOAD(&TimerHandle[timer_num].handle, compare); - if (HAL_timer_get_count(timer_num) >= compare) - TimerHandle[timer_num].handle.Instance->EGR |= TIM_EGR_UG; // Generate an immediate update interrupt +// FORCE_INLINE because these are used in performance-critical situations +FORCE_INLINE bool HAL_timer_initialized(const uint8_t timer_num) { + return timer_instance[timer_num] != NULL; +} +FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) { + return HAL_timer_initialized(timer_num) ? timer_instance[timer_num]->getCount() : 0; } -FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) { - return __HAL_TIM_GET_AUTORELOAD(&TimerHandle[timer_num].handle); +// NOTE: Method name may be misleading. +// STM32 has an Auto-Reload Register (ARR) as opposed to a "compare" register +FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t overflow) { + if (HAL_timer_initialized(timer_num)) { + timer_instance[timer_num]->setOverflow(overflow + 1, TICK_FORMAT); // Value decremented by setOverflow() + // wiki: "force all registers (Autoreload, prescaler, compare) to be taken into account" + // So, if the new overflow value is less than the count it will trigger a rollover interrupt. + if (overflow < timer_instance[timer_num]->getCount()) // Added 'if' here because reports say it won't boot without it + timer_instance[timer_num]->refresh(); + } } #define HAL_timer_isr_prologue(TIMER_NUM) diff --git a/Marlin/src/HAL/HAL_STM32F1/timers.cpp b/Marlin/src/HAL/HAL_STM32F1/timers.cpp index 68a0cad48..051f0323c 100644 --- a/Marlin/src/HAL/HAL_STM32F1/timers.cpp +++ b/Marlin/src/HAL/HAL_STM32F1/timers.cpp @@ -82,7 +82,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { timer_set_prescaler(STEP_TIMER_DEV, (uint16_t)(STEPPER_TIMER_PRESCALE - 1)); timer_set_reload(STEP_TIMER_DEV, 0xFFFF); timer_oc_set_mode(STEP_TIMER_DEV, STEP_TIMER_CHAN, TIMER_OC_MODE_FROZEN, TIMER_OC_NO_PRELOAD); // no output pin change - timer_set_compare(STEP_TIMER_DEV, STEP_TIMER_CHAN, _MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (STEPPER_TIMER_RATE / frequency))); + timer_set_compare(STEP_TIMER_DEV, STEP_TIMER_CHAN, _MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (STEPPER_TIMER_RATE) / frequency)); timer_no_ARR_preload_ARPE(STEP_TIMER_DEV); // Need to be sure no preload on ARR register timer_attach_interrupt(STEP_TIMER_DEV, STEP_TIMER_CHAN, stepTC_Handler); nvic_irq_set_priority(irq_num, STEP_TIMER_IRQ_PRIO); @@ -95,7 +95,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { timer_set_count(TEMP_TIMER_DEV, 0); timer_set_prescaler(TEMP_TIMER_DEV, (uint16_t)(TEMP_TIMER_PRESCALE - 1)); timer_set_reload(TEMP_TIMER_DEV, 0xFFFF); - timer_set_compare(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, _MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), ((F_CPU / TEMP_TIMER_PRESCALE) / frequency))); + timer_set_compare(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, _MIN(hal_timer_t(HAL_TIMER_TYPE_MAX), (F_CPU) / (TEMP_TIMER_PRESCALE) / frequency)); timer_attach_interrupt(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, tempTC_Handler); nvic_irq_set_priority(irq_num, TEMP_TIMER_IRQ_PRIO); timer_generate_update(TEMP_TIMER_DEV); diff --git a/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h b/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h index 0b0894084..0e44df4d1 100644 --- a/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h +++ b/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h @@ -24,16 +24,15 @@ #define CPU_32_BIT +#include "../../inc/MarlinConfigPre.h" + #include "../shared/Marduino.h" #include "../shared/math_32bit.h" #include "../shared/HAL_SPI.h" #include "fastio.h" -#include "watchdog.h" - #include "timers.h" - -#include "../../inc/MarlinConfigPre.h" +#include "watchdog.h" #include diff --git a/Marlin/src/HAL/HAL_TEENSY31_32/timers.cpp b/Marlin/src/HAL/HAL_TEENSY31_32/timers.cpp index 1ae4bcf4f..e4ccf33a4 100644 --- a/Marlin/src/HAL/HAL_TEENSY31_32/timers.cpp +++ b/Marlin/src/HAL/HAL_TEENSY31_32/timers.cpp @@ -53,7 +53,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { FTM0_SC = 0x00; // Set this to zero before changing the modulus FTM0_CNT = 0x0000; // Reset the count to zero FTM0_MOD = 0xFFFF; // max modulus = 65535 - FTM0_C0V = FTM0_TIMER_RATE / frequency; // Initial FTM Channel 0 compare value + FTM0_C0V = (FTM0_TIMER_RATE) / frequency; // Initial FTM Channel 0 compare value FTM0_SC = (FTM_SC_CLKS(0b1) & FTM_SC_CLKS_MASK) | (FTM_SC_PS(FTM0_TIMER_PRESCALE_BITS) & FTM_SC_PS_MASK); // Bus clock 60MHz divided by prescaler 8 FTM0_C0SC = FTM_CSC_CHIE | FTM_CSC_MSA | FTM_CSC_ELSA; break; @@ -62,7 +62,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { FTM1_SC = 0x00; // Set this to zero before changing the modulus FTM1_CNT = 0x0000; // Reset the count to zero FTM1_MOD = 0xFFFF; // max modulus = 65535 - FTM1_C0V = FTM1_TIMER_RATE / frequency; // Initial FTM Channel 0 compare value 65535 + FTM1_C0V = (FTM1_TIMER_RATE) / frequency; // Initial FTM Channel 0 compare value 65535 FTM1_SC = (FTM_SC_CLKS(0b1) & FTM_SC_CLKS_MASK) | (FTM_SC_PS(FTM1_TIMER_PRESCALE_BITS) & FTM_SC_PS_MASK); // Bus clock 60MHz divided by prescaler 4 FTM1_C0SC = FTM_CSC_CHIE | FTM_CSC_MSA | FTM_CSC_ELSA; break; diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/timers.cpp b/Marlin/src/HAL/HAL_TEENSY35_36/timers.cpp index 6ee611820..6bbc16dcb 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/timers.cpp +++ b/Marlin/src/HAL/HAL_TEENSY35_36/timers.cpp @@ -54,7 +54,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { FTM0_SC = 0x00; // Set this to zero before changing the modulus FTM0_CNT = 0x0000; // Reset the count to zero FTM0_MOD = 0xFFFF; // max modulus = 65535 - FTM0_C0V = FTM0_TIMER_RATE / frequency; // Initial FTM Channel 0 compare value + FTM0_C0V = (FTM0_TIMER_RATE) / frequency; // Initial FTM Channel 0 compare value FTM0_SC = (FTM_SC_CLKS(0b1) & FTM_SC_CLKS_MASK) | (FTM_SC_PS(FTM0_TIMER_PRESCALE_BITS) & FTM_SC_PS_MASK); // Bus clock 60MHz divided by prescaler 8 FTM0_C0SC = FTM_CSC_CHIE | FTM_CSC_MSA | FTM_CSC_ELSA; break; @@ -63,7 +63,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { FTM1_SC = 0x00; // Set this to zero before changing the modulus FTM1_CNT = 0x0000; // Reset the count to zero FTM1_MOD = 0xFFFF; // max modulus = 65535 - FTM1_C0V = FTM1_TIMER_RATE / frequency; // Initial FTM Channel 0 compare value 65535 + FTM1_C0V = (FTM1_TIMER_RATE) / frequency; // Initial FTM Channel 0 compare value 65535 FTM1_SC = (FTM_SC_CLKS(0b1) & FTM_SC_CLKS_MASK) | (FTM_SC_PS(FTM1_TIMER_PRESCALE_BITS) & FTM_SC_PS_MASK); // Bus clock 60MHz divided by prescaler 4 FTM1_C0SC = FTM_CSC_CHIE | FTM_CSC_MSA | FTM_CSC_ELSA; break; diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp index 19060b9b2..f59b7a42a 100644 --- a/Marlin/src/module/stepper.cpp +++ b/Marlin/src/module/stepper.cpp @@ -1537,7 +1537,7 @@ void Stepper::stepper_pulse_phase_isr() { uint32_t Stepper::stepper_block_phase_isr() { // If no queued movements, just wait 1ms for the next move - uint32_t interval = (STEPPER_TIMER_RATE / 1000); + uint32_t interval = (STEPPER_TIMER_RATE) / 1000; // If there is a current block if (current_block) { diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 9f0f05263..f48ce8e57 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -2290,7 +2290,7 @@ void Temperature::readings_ready() { HAL_TEMP_TIMER_ISR() { HAL_timer_isr_prologue(TEMP_TIMER_NUM); - Temperature::isr(); + Temperature::tick(); HAL_timer_isr_epilogue(TEMP_TIMER_NUM); } @@ -2320,11 +2320,21 @@ public: #endif }; -void Temperature::isr() { +/** + * Handle various ~1KHz tasks associated with temperature + * - Heater PWM (~1KHz with scaler) + * - LCD Button polling (~500Hz) + * - Start / Read one ADC sensor + * - Advance Babysteps + * - Endstop polling + * - Planner clean buffer + */ +void Temperature::tick() { static int8_t temp_count = -1; static ADCSensorState adc_sensor_state = StartupDelay; static uint8_t pwm_count = _BV(SOFT_PWM_SCALE); + // avoid multiple loads of pwm_count uint8_t pwm_count_tmp = pwm_count; diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 6a746626d..e3d7c2498 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -217,8 +217,8 @@ typedef struct { int16_t raw_min, raw_max; } raw_range_t; typedef struct { int16_t mintemp, maxtemp; } celsius_range_t; typedef struct { int16_t raw_min, raw_max, mintemp, maxtemp; } temp_range_t; -#define THERMISTOR_ABS_ZERO_C -273.15f // bbbbrrrrr cold ! -#define THERMISTOR_RESISTANCE_NOMINAL_C 25.0f // mmmmm comfortable +#define THERMISTOR_ABS_ZERO_C -273.15f // bbbbrrrrr cold ! +#define THERMISTOR_RESISTANCE_NOMINAL_C 25.0f // mmmmm comfortable #if HAS_USER_THERMISTORS @@ -267,8 +267,6 @@ class Temperature { public: - static volatile bool in_temp_isr; - #if HOTENDS #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) #define HOTEND_TEMPS (HOTENDS + 1) @@ -513,7 +511,7 @@ class Temperature { * Called from the Temperature ISR */ static void readings_ready(); - static void isr(); + static void tick(); /** * Call periodically to manage heaters diff --git a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json index d325747ef..976f198d6 100644 --- a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json +++ b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json @@ -16,7 +16,7 @@ ], "ldscript": "stm32f407xg.ld", "mcu": "stm32f407vet6", - "variant": "BIGTREE_GENERIC_STM32F407_5X" + "variant": "BIGTREE_TBD" }, "debug": { "jlink_device": "STM32F407VE", @@ -24,9 +24,7 @@ "svd_path": "STM32F40x.svd" }, "frameworks": [ - "arduino", - "cmsis", - "stm32cube" + "arduino" ], "name": "STM32F407VE (192k RAM. 512k Flash)", "upload": { diff --git a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json index 9a03f3b15..a949e00a3 100644 --- a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json +++ b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json @@ -16,7 +16,7 @@ ], "ldscript": "stm32f407xg.ld", "mcu": "stm32f407zgt6", - "variant": "BIGTREE_GENERIC_STM32F407_5X" + "variant": "BIGTREE_SKR_PRO_1v1" }, "debug": { "jlink_device": "STM32F407ZG", @@ -24,9 +24,7 @@ "svd_path": "STM32F40x.svd" }, "frameworks": [ - "arduino", - "cmsis", - "stm32cube" + "arduino" ], "name": "STM32F407ZG (192k RAM. 1024k Flash)", "upload": { diff --git a/buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py b/buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py deleted file mode 100644 index cc43893d0..000000000 --- a/buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py +++ /dev/null @@ -1,29 +0,0 @@ -import os,shutil -from SCons.Script import DefaultEnvironment -from platformio import util - -env = DefaultEnvironment() -platform = env.PioPlatform() -board = env.BoardConfig() - -FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32") -CMSIS_DIR = os.path.join(FRAMEWORK_DIR, "CMSIS", "CMSIS") -assert os.path.isdir(FRAMEWORK_DIR) -assert os.path.isdir(CMSIS_DIR) -assert os.path.isdir("buildroot/share/PlatformIO/variants") - -mcu_type = board.get("build.mcu")[:-2] -variant = board.get("build.variant") -series = mcu_type[:7].upper() + "xx" -variant_dir = os.path.join(FRAMEWORK_DIR, "variants", variant) - -source_dir = os.path.join("buildroot/share/PlatformIO/variants", variant) -assert os.path.isdir(source_dir) - -if not os.path.isdir(variant_dir): - os.mkdir(variant_dir) - -for file_name in os.listdir(source_dir): - full_file_name = os.path.join(source_dir, file_name) - if os.path.isfile(full_file_name): - shutil.copy(full_file_name, variant_dir) diff --git a/buildroot/share/PlatformIO/scripts/generic_create_variant.py b/buildroot/share/PlatformIO/scripts/generic_create_variant.py index cc43893d0..0b82c69f5 100644 --- a/buildroot/share/PlatformIO/scripts/generic_create_variant.py +++ b/buildroot/share/PlatformIO/scripts/generic_create_variant.py @@ -7,9 +7,7 @@ platform = env.PioPlatform() board = env.BoardConfig() FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32") -CMSIS_DIR = os.path.join(FRAMEWORK_DIR, "CMSIS", "CMSIS") assert os.path.isdir(FRAMEWORK_DIR) -assert os.path.isdir(CMSIS_DIR) assert os.path.isdir("buildroot/share/PlatformIO/variants") mcu_type = board.get("build.mcu")[:-2] diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/PeripheralPins.c b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c similarity index 54% rename from buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/PeripheralPins.c rename to buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c index 28504fc10..9b92ee60a 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/PeripheralPins.c +++ b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PeripheralPins.c @@ -41,56 +41,32 @@ #ifdef HAL_ADC_MODULE_ENABLED const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 - //{PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0 - //{PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - //{PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 - //{PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 - //{PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 - //{PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2 - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 - //{PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 - //{PA_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3 - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - //{PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 - {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 - //{PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5 - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - //{PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 - //{PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 - //{PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8 - {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 - //{PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9 - {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 - //{PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10 - //{PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10 - {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 - //{PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11 - //{PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11 - {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 - //{PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12 - //{PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12 - {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 - //{PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13 - //{PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13 - {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 - //{PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14 - {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 - //{PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15 + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 E0_DIR + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 BLTOUCH_2 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 BLTOUCH_4 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 E1_EN + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 TF_SS + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 TF_SCLK + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 TF_MISO + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 LED + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 HEATER2 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 HEATER0 + {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 Z_EN + {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 EXP_14 + {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 Z_DIR + {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 E0_EN + {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 EXP_8 + {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 EXP_7 #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio, 24 ADC - {PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 - {PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14 - {PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15 - {PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 - {PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 - {PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 - {PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 - {PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 + {PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 TH_0 + {PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14 TH_1 + {PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15 TH_2 + {PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 TH_3 + {PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 EXP_13 + {PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 EXP_3 + {PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 EXP_6 + {PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 EXP_5 #endif {NC, NP, 0} }; @@ -138,79 +114,81 @@ const PinMap PinMap_I2C_SCL[] = { #ifdef HAL_TIM_MODULE_ENABLED const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 HEATER0 + {PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 HEATER1 + {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 HEATER2 + {PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 BED + {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 FAN0 + {PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 FAN1 + {PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 FAN2 + {PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 EXTENSION1-4 + + //probably unused on SKR-Pro. confirmation needed, please. + //{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 //{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 - {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + //{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog? //{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 - {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + //{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog? //{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 //{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 - {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + //{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 //{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 //{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + //{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 //{PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + //{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 //{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 //{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + //{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 //{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N //{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + //{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 + //{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + //{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + //{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 //{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 //{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 //{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N //{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 //{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N //{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + //{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + //{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 //{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 //{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 //{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 + //{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 //{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - {PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N - {PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - {PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - {PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2 - {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - {PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 - {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - {PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 - {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - {PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 + //{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 + //{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + //{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + //{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N + //{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N + //{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N + //{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 + //{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + //{PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + //{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2 + //{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + //{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 + //{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + //{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 + //{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 //{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - //{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 - {PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - {PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - {PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - {PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - {PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 - {PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - {PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - {PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 - {PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - {PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 - {PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - {PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 - {PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 + //{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 + //{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 + //{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N + //{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 + //{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N + //{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 + //{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + //{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 + //{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio - {PF_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - {PF_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - {PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - {PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 + //{PF_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 + //{PF_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 + //{PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 + //{PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 #endif {NC, NP, 0} }; @@ -236,9 +214,7 @@ const PinMap PinMap_UART_TX[] = { #endif {NC, NP, 0} }; -#endif -#ifdef HAL_UART_MODULE_ENABLED const PinMap PinMap_UART_RX[] = { {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, @@ -256,9 +232,7 @@ const PinMap PinMap_UART_RX[] = { #endif {NC, NP, 0} }; -#endif -#ifdef HAL_UART_MODULE_ENABLED const PinMap PinMap_UART_RTS[] = { {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, @@ -271,9 +245,7 @@ const PinMap PinMap_UART_RTS[] = { #endif {NC, NP, 0} }; -#endif -#ifdef HAL_UART_MODULE_ENABLED const PinMap PinMap_UART_CTS[] = { {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, @@ -292,48 +264,30 @@ const PinMap PinMap_UART_CTS[] = { #ifdef HAL_SPI_MODULE_ENABLED const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, {NC, NP, 0} }; -#endif -#ifdef HAL_SPI_MODULE_ENABLED const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, {NC, NP, 0} }; -#endif -#ifdef HAL_SPI_MODULE_ENABLED const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, {NC, NP, 0} }; -#endif -#ifdef HAL_SPI_MODULE_ENABLED const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, {NC, NP, 0} }; #endif @@ -341,91 +295,40 @@ const PinMap PinMap_SPI_SSEL[] = { //*** CAN *** #ifdef HAL_CAN_MODULE_ENABLED -const PinMap PinMap_CAN_RD[] = { - {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, - {PB_5, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, - {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, - {PB_12, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, - {PD_0, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -const PinMap PinMap_CAN_TD[] = { - {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, - {PB_6, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, - {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, - {PB_13, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, - {PD_1, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, - {NC, NP, 0} -}; +#error "CAN bus isn't available on this board. Driver should be disabled." #endif //*** ETHERNET *** - #ifdef HAL_ETH_MODULE_ENABLED -const PinMap PinMap_Ethernet[] = { - {PA_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS - {PA_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_REF_CLK|ETH_RX_CLK - {PA_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDIO - {PA_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_COL - {PA_7, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS_DV|ETH_RX_DV - {PB_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD2 - {PB_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD3 - {PB_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT - {PB_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3 - {PB_10, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_ER - {PB_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN - {PB_12, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0 - {PB_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1 - {PC_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDC - {PC_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD2 - {PC_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_CLK - {PC_4, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD0 - {PC_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD1 - {PE_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3 - #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio - {PG_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT - {PG_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN - {PG_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0 - {PG_14, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1 - #endif - {NC, NP, 0} -}; +#error "Ethernet port isn't available on this board. Driver should be disabled." #endif //*** No QUADSPI *** //*** USB *** - #ifdef HAL_PCD_MODULE_ENABLED const PinMap PinMap_USB_OTG_FS[] = { - //{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF - //{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS - //{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID + //{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF used by LCD + //{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS available on wifi port, if empty + //{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID available on UART1_RX if not used {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP {NC, NP, 0} }; -#endif -#ifdef HAL_PCD_MODULE_ENABLED -const PinMap PinMap_USB_OTG_HS[] = { +const PinMap PinMap_USB_OTG_HS[] = { /* #ifdef USE_USB_HS_IN_FS - {PA_4, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_SOF {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID {PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS {PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DM {PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DP #else + #error "USB in HS mode isn't supported by the board" {PA_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D0 - {PA_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_CK {PB_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D1 {PB_1, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D2 {PB_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D7 {PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D3 - {PB_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D4 {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D5 {PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D6 {PC_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_STP diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/PinNamesVar.h b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PinNamesVar.h similarity index 100% rename from buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/PinNamesVar.h rename to buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/PinNamesVar.h diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h new file mode 100644 index 000000000..e0e8239aa --- /dev/null +++ b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/hal_conf_extra.h @@ -0,0 +1,52 @@ +#pragma once + +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it? +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +//#define HAL_UART_MODULE_ENABLED // by default +//#define HAL_PCD_MODULE_ENABLED // Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE) + +#undef HAL_SD_MODULE_ENABLED +#undef HAL_DAC_MODULE_ENABLED +#undef HAL_FLASH_MODULE_ENABLED +#undef HAL_CAN_MODULE_ENABLED +#undef HAL_CAN_LEGACY_MODULE_ENABLED +#undef HAL_CEC_MODULE_ENABLED +#undef HAL_CRYP_MODULE_ENABLED +#undef HAL_DCMI_MODULE_ENABLED +#undef HAL_DMA2D_MODULE_ENABLED +#undef HAL_ETH_MODULE_ENABLED +#undef HAL_NAND_MODULE_ENABLED +#undef HAL_NOR_MODULE_ENABLED +#undef HAL_PCCARD_MODULE_ENABLED +#undef HAL_SRAM_MODULE_ENABLED +#undef HAL_SDRAM_MODULE_ENABLED +#undef HAL_HASH_MODULE_ENABLED +#undef HAL_EXTI_MODULE_ENABLED +#undef HAL_SMBUS_MODULE_ENABLED +#undef HAL_I2S_MODULE_ENABLED +#undef HAL_IWDG_MODULE_ENABLED +#undef HAL_LTDC_MODULE_ENABLED +#undef HAL_DSI_MODULE_ENABLED +#undef HAL_QSPI_MODULE_ENABLED +#undef HAL_RNG_MODULE_ENABLED +#undef HAL_SAI_MODULE_ENABLED +#undef HAL_IRDA_MODULE_ENABLED +#undef HAL_SMARTCARD_MODULE_ENABLED +#undef HAL_WWDG_MODULE_ENABLED +#undef HAL_HCD_MODULE_ENABLED +#undef HAL_FMPI2C_MODULE_ENABLED +#undef HAL_SPDIFRX_MODULE_ENABLED +#undef HAL_DFSDM_MODULE_ENABLED +#undef HAL_LPTIM_MODULE_ENABLED +#undef HAL_MMC_MODULE_ENABLED diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/ldscript.ld b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/ldscript.ld similarity index 99% rename from buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/ldscript.ld rename to buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/ldscript.ld index f92e3eeaa..0c060d175 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/ldscript.ld +++ b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/ldscript.ld @@ -192,7 +192,6 @@ SECTIONS . = ALIGN(4); } >RAM - /* Remove information from the standard libraries */ /DISCARD/ : { @@ -203,5 +202,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/variant.cpp similarity index 100% rename from buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp rename to buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/variant.cpp diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/variant.h similarity index 96% rename from buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h rename to buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/variant.h index 9b62bb677..396f3138c 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h +++ b/buildroot/share/PlatformIO/variants/BIGTREE_SKR_PRO_1v1/variant.h @@ -222,9 +222,15 @@ extern "C" { //#define DACC_RESOLUTION 12 // PWM resolution -#define PWM_RESOLUTION 8 -#define PWM_FREQUENCY 20000 -#define PWM_MAX_DUTY_CYCLE 255 +/* + * BEWARE: + * Changing this value from the default (1000) will affect the PWM output value of analogWrite (to a PWM pin) + * Since the pin is toggled on capture, if you change the frequency of the timer you have to adapt the compare value (analogWrite thinks you did) + */ +//#define PWM_FREQUENCY 20000 +//The bottom values are the default and don't need to be redefined +//#define PWM_RESOLUTION 8 +//#define PWM_MAX_DUTY_CYCLE 255 // Below SPI and I2C definitions already done in the core // Could be redefined here if differs from the default one @@ -241,6 +247,7 @@ extern "C" { // Timer Definitions //Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c #define TIMER_TONE TIM6 +#define TIMER_SERIAL TIM7 // Do not use basic timer: OC is required #define TIMER_SERVO TIM2 //TODO: advanced-control timers don't work @@ -260,9 +267,6 @@ extern "C" { #define PIN_SERIAL_RX PA10 #define PIN_SERIAL_TX PA9 -/* Extra HAL modules */ -#define HAL_PCD_MODULE_ENABLED - #ifdef __cplusplus } // extern "C" #endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/PeripheralPins.c index f76cc14bf..6b6cfdbcb 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/PeripheralPins.c +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/PeripheralPins.c @@ -3,8 +3,10 @@ * Copyright (c) 2019, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. @@ -28,8 +30,8 @@ ******************************************************************************* * Automatically generated from STM32F407Z(E-G)Tx.xml */ -#include -#include +#include "Arduino.h" +#include "PeripheralPins.h" /* ===== * Note: Commented lines are alternative possibilities which are not used per default. @@ -40,58 +42,58 @@ //*** ADC *** #ifdef HAL_ADC_MODULE_ENABLED -const PinMap PinMap_ADC[] = { +WEAK const PinMap PinMap_ADC[] = { {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 - // {PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0 - // {PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0 + //{PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0 + //{PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0 {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - // {PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 - // {PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1 - // {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 + //{PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 + //{PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1 + //{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 {PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 - // {PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2 - // {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 - // {PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 + //{PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2 + //{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 + //{PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 {PA_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3 {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - // {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 - // {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 + //{PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 + //{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5 #if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG) - // {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - // {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6 - // {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 - // {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7 - // {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 + //{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 + //{PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6 + //{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 + //{PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7 + //{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 #endif {PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8 {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 - // {PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9 - // {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 - // {PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10 + //{PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9 + //{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 + //{PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10 {PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10 {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 - // {PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11 - // {PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11 - // {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 + //{PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11 + //{PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11 + //{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 {PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12 - // {PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12 - // {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 - // {PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13 + //{PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12 + //{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 + //{PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13 {PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13 - // {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 + //{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 {PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14 - // {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 + //{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 {PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15 #if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG) - // {PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 - // {PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14 - // {PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15 + //{PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 + //{PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14 + //{PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15 {PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 {PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 {PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 - // {PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 - // {PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 + //{PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 + //{PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 #endif {NC, NP, 0} }; @@ -100,7 +102,7 @@ const PinMap PinMap_ADC[] = { //*** DAC *** #ifdef HAL_DAC_MODULE_ENABLED -const PinMap PinMap_DAC[] = { +WEAK const PinMap PinMap_DAC[] = { {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 {NC, NP, 0} @@ -110,7 +112,7 @@ const PinMap PinMap_DAC[] = { //*** I2C *** #ifdef HAL_I2C_MODULE_ENABLED -const PinMap PinMap_I2C_SDA[] = { +WEAK const PinMap PinMap_I2C_SDA[] = { {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, @@ -123,7 +125,7 @@ const PinMap PinMap_I2C_SDA[] = { #endif #ifdef HAL_I2C_MODULE_ENABLED -const PinMap PinMap_I2C_SCL[] = { +WEAK const PinMap PinMap_I2C_SCL[] = { {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, @@ -138,61 +140,61 @@ const PinMap PinMap_I2C_SCL[] = { //*** PWM *** #ifdef HAL_TIM_MODULE_ENABLED -const PinMap PinMap_PWM[] = { +WEAK const PinMap PinMap_PWM[] = { {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 + //{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - // {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 + //{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - // {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 - // {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 + //{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 + //{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 - // {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 + //{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 + //{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N + //{PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - // {PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N + //{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 + //{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 + //{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N + //{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 - // {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N + //{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + //{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + //{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N + //{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - // {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + //{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + //{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 + //{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 + //{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 {PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N + //{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N + //{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N {PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - {PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + //{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N + //{PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N {PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2 - {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + //{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 {PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 - {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + //{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 {PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - {PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 - {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + //{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 + //{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 {PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 {PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 {PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 @@ -220,47 +222,47 @@ const PinMap PinMap_PWM[] = { //*** SERIAL *** #ifdef HAL_UART_MODULE_ENABLED -const PinMap PinMap_UART_TX[] = { +WEAK const PinMap PinMap_UART_TX[] = { {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, - // {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + //{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, {PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, {PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, #if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG) - // {PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + //{PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, #endif {NC, NP, 0} }; #endif #ifdef HAL_UART_MODULE_ENABLED -const PinMap PinMap_UART_RX[] = { +WEAK const PinMap PinMap_UART_RX[] = { {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, - // {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, + //{PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, {PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, {PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, #if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG) - // {PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, + //{PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, #endif {NC, NP, 0} }; #endif #ifdef HAL_UART_MODULE_ENABLED -const PinMap PinMap_UART_RTS[] = { +WEAK const PinMap PinMap_UART_RTS[] = { {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, @@ -275,7 +277,7 @@ const PinMap PinMap_UART_RTS[] = { #endif #ifdef HAL_UART_MODULE_ENABLED -const PinMap PinMap_UART_CTS[] = { +WEAK const PinMap PinMap_UART_CTS[] = { {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, @@ -292,9 +294,9 @@ const PinMap PinMap_UART_CTS[] = { //*** SPI *** #ifdef HAL_SPI_MODULE_ENABLED -const PinMap PinMap_SPI_MOSI[] = { +WEAK const PinMap PinMap_SPI_MOSI[] = { {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + //{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, @@ -304,9 +306,9 @@ const PinMap PinMap_SPI_MOSI[] = { #endif #ifdef HAL_SPI_MODULE_ENABLED -const PinMap PinMap_SPI_MISO[] = { +WEAK const PinMap PinMap_SPI_MISO[] = { {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + //{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, @@ -316,9 +318,9 @@ const PinMap PinMap_SPI_MISO[] = { #endif #ifdef HAL_SPI_MODULE_ENABLED -const PinMap PinMap_SPI_SCLK[] = { +WEAK const PinMap PinMap_SPI_SCLK[] = { {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + //{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, @@ -328,10 +330,10 @@ const PinMap PinMap_SPI_SCLK[] = { #endif #ifdef HAL_SPI_MODULE_ENABLED -const PinMap PinMap_SPI_SSEL[] = { +WEAK const PinMap PinMap_SPI_SSEL[] = { {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + //{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + //{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, @@ -342,7 +344,7 @@ const PinMap PinMap_SPI_SSEL[] = { //*** CAN *** #ifdef HAL_CAN_MODULE_ENABLED -const PinMap PinMap_CAN_RD[] = { +WEAK const PinMap PinMap_CAN_RD[] = { {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, {PB_5, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, @@ -353,7 +355,7 @@ const PinMap PinMap_CAN_RD[] = { #endif #ifdef HAL_CAN_MODULE_ENABLED -const PinMap PinMap_CAN_TD[] = { +WEAK const PinMap PinMap_CAN_TD[] = { {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, {PB_6, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, @@ -366,7 +368,7 @@ const PinMap PinMap_CAN_TD[] = { //*** ETHERNET *** #ifdef HAL_ETH_MODULE_ENABLED -const PinMap PinMap_Ethernet[] = { +WEAK const PinMap PinMap_Ethernet[] = { {PA_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS {PA_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_REF_CLK|ETH_RX_CLK {PA_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDIO @@ -401,10 +403,10 @@ const PinMap PinMap_Ethernet[] = { //*** USB *** #ifdef HAL_PCD_MODULE_ENABLED -const PinMap PinMap_USB_OTG_FS[] = { - // {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF - // {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS - // {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID +WEAK const PinMap PinMap_USB_OTG_FS[] = { + //{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF + //{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS + //{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP {NC, NP, 0} @@ -412,7 +414,7 @@ const PinMap PinMap_USB_OTG_FS[] = { #endif #ifdef HAL_PCD_MODULE_ENABLED -const PinMap PinMap_USB_OTG_HS[] = { +WEAK const PinMap PinMap_USB_OTG_HS[] = { #ifdef USE_USB_HS_IN_FS {PA_4, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_SOF {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID @@ -436,3 +438,21 @@ const PinMap PinMap_USB_OTG_HS[] = { {NC, NP, 0} }; #endif + +//*** SD *** + +#ifdef HAL_SD_MODULE_ENABLED +WEAK const PinMap PinMap_SD[] = { + //{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4 + //{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5 + //{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6 + //{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7 + {PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0 + {PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1 + {PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2 + {PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3 + {PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK + {PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD + {NC, NP, 0} +}; +#endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/hal_conf_custom.h similarity index 83% rename from buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h rename to buildroot/share/PlatformIO/variants/MARLIN_F407VE/hal_conf_custom.h index 50d59af3b..92e9fecb4 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/hal_conf_custom.h @@ -17,8 +17,8 @@ */ /* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H +#ifndef __STM32F4xx_HAL_CONF_CUSTOM +#define __STM32F4xx_HAL_CONF_CUSTOM #ifdef __cplusplus extern "C" { @@ -73,7 +73,9 @@ extern "C" { /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ #define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED +#ifndef HAL_PCD_MODULE_ENABLED + #define HAL_PCD_MODULE_ENABLED //Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE) +#endif /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ /* #define HAL_SPDIFRX_MODULE_ENABLED */ @@ -82,69 +84,81 @@ extern "C" { /* #define HAL_MMC_MODULE_ENABLED */ /* ########################## HSE/HSI Values adaptation ##################### */ - /** +/** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency * (when HSE is used as system clock source, directly or through the PLL). */ #ifndef HSE_VALUE -#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ #ifndef HSE_STARTUP_TIMEOUT -#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ - /** +/** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency * (when HSI is used as system clock source, directly or through the PLL). */ #ifndef HSI_VALUE -#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */ #endif /* HSI_VALUE */ - /** +/** * @brief Internal Low Speed oscillator (LSI) value. */ #ifndef LSI_VALUE -#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations -in voltage and temperature.*/ - /** +in voltage and temperature. */ +/** * @brief External Low Speed oscillator (LSE) value. */ #ifndef LSE_VALUE -#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ #endif /* LSE_VALUE */ #ifndef LSE_STARTUP_TIMEOUT -#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ - /** +/** * @brief External clock source for I2S peripheral * This value is used by the I2S HAL module to compute the I2S clock source * frequency, this source is inserted directly through I2S_CKIN pad. */ #ifndef EXTERNAL_CLOCK_VALUE -#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ +#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/ #endif /* EXTERNAL_CLOCK_VALUE */ /* Tip: To avoid modifying this file each time you need to use different HSE, === you can define the HSE value in your toolchain compiler preprocessor. */ /* ########################### System Configuration ######################### */ - /** +/** * @brief This is the HAL system configuration section */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#if !defined (VDD_VALUE) +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#endif +#if !defined (TICK_INT_PRIORITY) +#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */ +#endif +#if !defined (USE_RTOS) #define USE_RTOS 0U +#endif +#if !defined (PREFETCH_ENABLE) #define PREFETCH_ENABLE 1U +#endif +#if !defined (INSTRUCTION_CACHE_ENABLE) #define INSTRUCTION_CACHE_ENABLE 1U +#endif +#if !defined (DATA_CACHE_ENABLE) #define DATA_CACHE_ENABLE 1U +#endif #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ #define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ @@ -186,7 +200,7 @@ in voltage and temperature.*/ #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ /* ########################## Assert Selection ############################## */ - /** +/** * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ @@ -215,32 +229,32 @@ in voltage and temperature.*/ /* DP83848_PHY_ADDRESS Address*/ #define DP83848_PHY_ADDRESS 0x01U /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) +#define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) +#define PHY_CONFIG_DELAY 0x00000FFFU -#define PHY_READ_TO ((uint32_t)0x0000FFFFU) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU /* Section 3: Common PHY Registers */ -#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ +#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ @@ -251,14 +265,15 @@ in voltage and temperature.*/ /* ################## SPI peripheral configuration ########################## */ /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ +#ifndef USE_SPI_CRC #define USE_SPI_CRC 0U +#endif /* Includes ------------------------------------------------------------------*/ - /** +/** * @brief Include module's header file */ @@ -456,9 +471,9 @@ in voltage and temperature.*/ /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT - /** +/** * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function + * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source * line number of the call that failed. * If expr is true, it returns no value. @@ -475,7 +490,7 @@ void assert_failed(uint8_t *file, uint32_t line); } #endif -#endif /* __STM32F4xx_HAL_CONF_H */ +#endif /* __STM32F4xx_HAL_CONF_CUSTOM_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/ldscript.ld b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/ldscript.ld index cdbbfcdcd..efe2db5cd 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/ldscript.ld +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/ldscript.ld @@ -1,10 +1,11 @@ /* ***************************************************************************** ** -** File : LinkerScript.ld + +** File : lscript.ld ** -** Abstract : Linker script for STM32F407VETx Device with -** 512KByte FLASH, 128KByte RAM +** Abstract : Linker script for STM32F407(VZ)(EG)Tx Device with +** 512/1024KByte FLASH, 128KByte RAM ** ** Set heap size, stack size and stack location according ** to application requirements. @@ -17,13 +18,32 @@ ** Distribution: The file is distributed as is, without any warranty ** of any kind. ** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. +***************************************************************************** +** @attention +** +**

© COPYRIGHT(c) 2014 Ac6

+** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of Ac6 nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ** ***************************************************************************** */ @@ -32,7 +52,7 @@ ENTRY(Reset_Handler) /* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ +_estack = 0x20000000 + LD_MAX_DATA_SIZE; /* end of RAM */ /* Generate a link error if heap and stack don't fit into RAM */ _Min_Heap_Size = 0x200; /* required amount of heap */ _Min_Stack_Size = 0x400; /* required amount of stack */ @@ -40,9 +60,9 @@ _Min_Stack_Size = 0x400; /* required amount of stack */ /* Specify the memory areas */ MEMORY { -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K +FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET } /* Define output sections */ @@ -57,7 +77,7 @@ SECTIONS } >FLASH /* The program code and other data goes into FLASH */ - .text ALIGN(8): + .text ALIGN(4): { . = ALIGN(4); *(.text) /* .text sections (code) */ @@ -164,12 +184,12 @@ SECTIONS /* User_heap_stack section, used to check that there is enough RAM left */ ._user_heap_stack : { - . = ALIGN(8); + . = ALIGN(4); PROVIDE ( end = . ); PROVIDE ( _end = . ); . = . + _Min_Heap_Size; . = . + _Min_Stack_Size; - . = ALIGN(8); + . = ALIGN(4); } >RAM /* Remove information from the standard libraries */ diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp index 66190c629..e78718c8a 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.cpp @@ -28,12 +28,13 @@ ******************************************************************************* */ -#include "variant.h" +#include "pins_arduino.h" #ifdef __cplusplus extern "C" { #endif +#if defined(ARDUINO_BLACK_F407VE) || defined(ARDUINO_BLACK_F407VG) // Pin number // This array allows to wrap Arduino pin number(Dx or x) // to STM32 PinName (PX_n) @@ -93,23 +94,98 @@ const PinName digitalPin[] = { PB_13, PB_14, PB_4, }; +#endif // ARDUINO_BLACK_F407VE || ARDUINO_BLACK_F407VG + +#if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG) +const PinName digitalPin[] = { + // Left Side + //Ext //Int + //GND //5V + //GND //3V3 + PB_12, PB_13, + PB_14, PB_15, + PD_8, PD_9, + PD_10, PD_11, + PD_12, PD_13, + PD_14, PD_15, + PG_2, PG_3, + PG_4, PG_5, + PG_6, PG_7, + PG_8, PC_6, + PC_7, PC_8, + PC_9, PA_8, + PA_9, PA_10, + PA_11, PA_12, // PA_11: USB_DM, PA_12: USB_DP + PA_13, PA_14, + PA_15, PC_10, + PC_11, PC_12, + PD_0, PD_1, + PD_2, PD_3, + PD_4, PD_5, + PD_6, PD_7, + PG_9, PG_10, + PG_11, PG_12, + PG_13, PG_14, + PG_15, PB_3, + PB_4, PB_5, + PB_6, PB_7, + PB_8, PB_9, + + // Right Side + //Int //Ext + //3V3 //3V3 + //BOOT1 //BOOT0 + //GND //GND + //VREF+ //GND + PB_10, PB_11, + PE_14, PE_15, + PE_12, PE_13, + PE_10, PE_11, + PE_8, PE_9, + PG_1, PE_7, + PF_15, PG_0, + PF_13, PF_14, + PF_11, PF_12, + PB_2, // PB1 PB2 Inverted to allow contiguous analog pins + PB_1, + PC_5, PB_0, + PA_7, PC_4, + PA_5, PA_6, + PA_3, PA_4, + PA_1, PA_2, + PC_3, PA_0, // PA_0(WK_UP): BUT K_UP) + PC_1, PC_2, + /*PF_10,*/PC_0, // PF_10: Moved to allow contiguous analog pins + PF_8, /*PF_9,*/ // PF_9: Moved to allow contiguous analog pins + PF_6, PF_7, + PF_10, PF_9, // PF_10: LED D2, PF_9: LED D1 (active low) + PF_4, PF_5, + PF_2, PF_3, + PF_0, PF_1, + PE_6, PC_13, + PE_4, PE_5, // PE_4: BUT K0, PE_5: BUT K1 + PE_2, PE_3, + PE_0, PE_1, +}; +#endif // ARDUINO_BLACK_F407ZE || ARDUINO_BLACK_F407ZG #ifdef __cplusplus } #endif -// ------------------------ +// ---------------------------------------------------------------------------- #ifdef __cplusplus extern "C" { #endif - /** +/** * @brief System Clock Configuration * @param None * @retval None */ -WEAK void SystemClock_Config() { +WEAK void SystemClock_Config(void) +{ RCC_OscInitTypeDef RCC_OscInitStruct; RCC_ClkInitTypeDef RCC_ClkInitStruct; diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.h index c0a29322f..4e7e299f1 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/variant.h @@ -27,12 +27,12 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ -#pragma once +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ /*---------------------------------------------------------------------------- * Headers *----------------------------------------------------------------------------*/ -#include #ifdef __cplusplus extern "C" { @@ -41,7 +41,7 @@ extern "C" { /*---------------------------------------------------------------------------- * Pins *----------------------------------------------------------------------------*/ -extern const PinName digitalPin[]; +#if defined(ARDUINO_BLACK_F407VE) || defined(ARDUINO_BLACK_F407VG) // Right Side #define PE1 0 #define PE0 1 @@ -133,9 +133,9 @@ extern const PinName digitalPin[]; //#define DACC_RESOLUTION 12 // PWM resolution -#define PWM_RESOLUTION 8 -#define PWM_FREQUENCY 20000 -#define PWM_MAX_DUTY_CYCLE 255 +//#define PWM_RESOLUTION 8 +//#define PWM_FREQUENCY 20000 +//#define PWM_MAX_DUTY_CYCLE 255 // On-board LED pin number #define LED_D2 PA6 @@ -144,6 +144,138 @@ extern const PinName digitalPin[]; // Board specific button #define BTN_K_UP PA0 +#endif // ARDUINO_BLACK_F407VE || ARDUINO_BLACK_F407VG + +#if defined(ARDUINO_BLACK_F407ZE) || defined(ARDUINO_BLACK_F407ZG) +// Left Side +#define PB12 0 +#define PB13 1 +#define PB14 2 +#define PB15 3 +#define PD8 4 +#define PD9 5 +#define PD10 6 +#define PD11 7 +#define PD12 8 +#define PD13 9 +#define PD14 10 +#define PD15 11 +#define PG2 12 +#define PG3 13 +#define PG4 14 +#define PG5 15 +#define PG6 16 +#define PG7 17 +#define PG8 18 +#define PC6 19 +#define PC7 20 +#define PC8 21 +#define PC9 22 +#define PA8 23 +#define PA9 24 +#define PA10 25 +#define PA11 26 // USB_DM +#define PA12 27 // USB_DP +#define PA13 28 +#define PA14 29 +#define PA15 30 +#define PC10 31 +#define PC11 32 +#define PC12 33 +#define PD0 34 +#define PD1 35 +#define PD2 36 +#define PD3 37 +#define PD4 38 +#define PD5 39 +#define PD6 40 +#define PD7 41 +#define PG9 42 +#define PG10 43 +#define PG11 44 +#define PG12 45 +#define PG13 46 +#define PG14 47 +#define PG15 48 +#define PB3 49 +#define PB4 50 +#define PB5 51 +#define PB6 52 +#define PB7 53 +#define PB8 54 +#define PB9 55 + +// Right Side +#define PB10 56 +#define PB11 57 +#define PE14 58 +#define PE15 59 +#define PE12 60 +#define PE13 61 +#define PE10 62 +#define PE11 63 +#define PE8 64 +#define PE9 65 +#define PG1 66 +#define PE7 67 +#define PF15 68 +#define PG0 69 +#define PF13 70 +#define PF14 71 +#define PF11 72 +#define PF12 73 +#define PB2 74 +#define PB1 75 // A0 +#define PC5 76 // A1 +#define PB0 77 // A2 +#define PA7 78 // A3 +#define PC4 79 // A4 +#define PA5 80 // A5 +#define PA6 81 // A6 +#define PA3 82 // A7 +#define PA4 83 // A8 +#define PA1 84 // A9 +#define PA2 85 // A10 +#define PC3 86 // A11 +#define PA0 87 // A12/PA_0(WK_UP): BUT K_UP) +#define PC1 88 // A13 +#define PC2 89 // A14 +#define PC0 90 // A15 +#define PF8 91 // A16 +#define PF6 92 // A17 +#define PF7 93 // A18 +#define PF9 94 // LED D1 (active low) +#define PF10 95 // LED D2 (active low) +#define PF4 96 +#define PF5 97 +#define PF2 98 +#define PF3 99 +#define PF0 100 +#define PF1 101 +#define PE6 102 +#define PC13 103 +#define PE4 104 // BUT K0 +#define PE5 105 // BUT K1 +#define PE2 106 +#define PE3 107 +#define PE0 108 +#define PE1 109 + +// This must be a literal +#define NUM_DIGITAL_PINS 110 +// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS +#define NUM_ANALOG_INPUTS 19 +#define NUM_ANALOG_FIRST 75 + +// On-board LED pin number +#define LED_D2 PF10 +#define LED_D1 PF9 + +// Board specific button +#define BTN_WK_UP PA0 + +#endif // ARDUINO_BLACK_F407ZE || ARDUINO_BLACK_F407ZG + #define LED_BUILTIN LED_D2 #define LED_GREEN LED_D2 @@ -187,6 +319,10 @@ extern const PinName digitalPin[]; #define PIN_SERIAL_RX PA10 #define PIN_SERIAL_TX PA9 +/* Extra HAL modules */ +#define HAL_DAC_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED + #ifdef __cplusplus } // extern "C" #endif @@ -213,3 +349,5 @@ extern const PinName digitalPin[]; #define SERIAL_PORT_MONITOR Serial #define SERIAL_PORT_HARDWARE Serial1 #endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/platformio.ini b/platformio.ini index 7c038922e..7be03584a 100644 --- a/platformio.ini +++ b/platformio.ini @@ -352,12 +352,15 @@ monitor_speed = 250000 # ARMED (STM32) # [env:ARMED] -platform = ststm32@5.6.0 +platform = ststm32@>=5.7.0 framework = arduino board = armed_v1 -build_flags = ${common.build_flags} -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11 +build_flags = + ${common.build_flags} -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DUSBD_USE_CDC + -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11 + -IMarlin/src/HAL/HAL_STM32 lib_deps = ${common.lib_deps} -lib_ignore = Adafruit NeoPixel +lib_ignore = Adafruit NeoPixel, SoftwareSerial src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -460,38 +463,44 @@ monitor_speed = 250000 # Shield - https://github.com/jmz52/Hardware # [env:STM32F407VE_black] -platform = ststm32@5.4.3 -framework = arduino -board = blackSTM32F407VET6 -extra_scripts = pre:buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py -build_flags = ${common.build_flags} - -DSTM32F4 -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\" -lib_deps = ${common.lib_deps} -lib_ignore = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster -src_filter = ${common.default_src_filter} + -monitor_speed = 250000 +platform = ststm32@>=5.7.0 +framework = arduino +platform_packages = framework-arduinoststm32@>=3.10700.191028 +board = blackSTM32F407VET6 +extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +build_flags = ${common.build_flags} + -DTARGET_STM32F4 -DARDUINO_BLACK_F407VE + -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\" + -IMarlin/src/HAL/HAL_STM32 +lib_deps = ${common.lib_deps} +lib_ignore = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster, SoftwareSerial +src_filter = ${common.default_src_filter} + +monitor_speed = 250000 # # Bigtreetech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) # [env:BIGTREE_SKR_PRO] -platform = ststm32@5.6.0 -framework = arduino -board = BigTree_SKR_Pro -extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py -build_flags = ${common.build_flags} +platform = ststm32@>=5.7.0 +framework = arduino +platform_packages = framework-arduinoststm32@>=3.10700.191028 +board = BigTree_SKR_Pro +extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +build_flags = ${common.build_flags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407ZG\" - -DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 -DHAVE_HWSERIAL6 -DSS_TIMER=4 -lib_deps = + -DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 + -DHAVE_HWSERIAL6 + -IMarlin/src/HAL/HAL_STM32 +lib_deps = U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip - LiquidCrystal@1.3.4 + LiquidCrystal TMCStepper@>=0.5.2,<1.0.0 Adafruit NeoPixel LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip - SoftwareSerialM=https://github.com/sjasonsmith/SoftwareSerialM/archive/SKR_PRO.zip -src_filter = ${common.default_src_filter} + -monitor_speed = 250000 +lib_ignore = SoftwareSerial, SoftwareSerialM +src_filter = ${common.default_src_filter} + +monitor_speed = 250000 # # BIGTREE_SKR_BTT002 (STM32F407VET6 ARM Cortex-M4) @@ -531,7 +540,7 @@ monitor_speed = 250000 # Malyan M200 (STM32F103CB) # [env:STM32F103CB_malyan] -platform = ststm32@5.6.0 +platform = ststm32@>=5.7.0 framework = arduino board = malyanM200 build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections