diff --git a/Marlin/src/gcode/feature/trinamic/M906.cpp b/Marlin/src/gcode/feature/trinamic/M906.cpp
index 7e33187c3..8ba645333 100644
--- a/Marlin/src/gcode/feature/trinamic/M906.cpp
+++ b/Marlin/src/gcode/feature/trinamic/M906.cpp
@@ -37,50 +37,54 @@ void GcodeSuite::M906() {
   #define TMC_SET_CURRENT(Q) tmc_set_current(stepper##Q, TMC_##Q, value)
 
   bool report = true;
+  const uint8_t index = parser.byteval('I');
   LOOP_XYZE(i) if (uint16_t value = parser.intval(axis_codes[i])) {
     report = false;
     switch (i) {
       case X_AXIS:
         #if X_IS_TRINAMIC
-          TMC_SET_CURRENT(X);
+          if (index == 0) TMC_SET_CURRENT(X);
         #endif
         #if X2_IS_TRINAMIC
-          TMC_SET_CURRENT(X2);
+          if (index == 1) TMC_SET_CURRENT(X2);
         #endif
         break;
       case Y_AXIS:
         #if Y_IS_TRINAMIC
-          TMC_SET_CURRENT(Y);
+          if (index == 0) TMC_SET_CURRENT(Y);
         #endif
         #if Y2_IS_TRINAMIC
-          TMC_SET_CURRENT(Y2);
+          if (index == 1) TMC_SET_CURRENT(Y2);
         #endif
         break;
       case Z_AXIS:
         #if Z_IS_TRINAMIC
-          TMC_SET_CURRENT(Z);
+          if (index == 0) TMC_SET_CURRENT(Z);
         #endif
         #if Z2_IS_TRINAMIC
-          TMC_SET_CURRENT(Z2);
-        #endif
-        break;
-      case E_AXIS:
-        #if E0_IS_TRINAMIC
-          TMC_SET_CURRENT(E0);
-        #endif
-        #if E1_IS_TRINAMIC
-          TMC_SET_CURRENT(E1);
-        #endif
-        #if E2_IS_TRINAMIC
-          TMC_SET_CURRENT(E2);
-        #endif
-        #if E3_IS_TRINAMIC
-          TMC_SET_CURRENT(E3);
-        #endif
-        #if E4_IS_TRINAMIC
-          TMC_SET_CURRENT(E4);
+          if (index == 1) TMC_SET_CURRENT(Z2);
         #endif
         break;
+      case E_AXIS: {
+        if (get_target_extruder_from_command()) return;
+        switch (target_extruder) {
+          #if E0_IS_TRINAMIC
+            case 0: TMC_SET_CURRENT(E0); break;
+          #endif
+          #if E1_IS_TRINAMIC
+            case 1: TMC_SET_CURRENT(E1); break;
+          #endif
+          #if E2_IS_TRINAMIC
+            case 2: TMC_SET_CURRENT(E2); break;
+          #endif
+          #if E3_IS_TRINAMIC
+            case 3: TMC_SET_CURRENT(E3); break;
+          #endif
+          #if E4_IS_TRINAMIC
+            case 4: TMC_SET_CURRENT(E4); break;
+          #endif
+        }
+      } break;
     }
   }
 
diff --git a/Marlin/src/gcode/feature/trinamic/M911-M915.cpp b/Marlin/src/gcode/feature/trinamic/M911-M915.cpp
index 9a48f5cae..fa02aaadf 100644
--- a/Marlin/src/gcode/feature/trinamic/M911-M915.cpp
+++ b/Marlin/src/gcode/feature/trinamic/M911-M915.cpp
@@ -86,50 +86,54 @@ void GcodeSuite::M912() {
     #define TMC_SET_PWMTHRS_E(E) do{ const uint8_t extruder = E; tmc_set_pwmthrs(stepperE##E, TMC_E##E, value, planner.axis_steps_per_mm[E_AXIS_N]); }while(0)
 
     bool report = true;
+    const uint8_t index = parser.byteval('I');
     LOOP_XYZE(i) if (int32_t value = parser.longval(axis_codes[i])) {
       report = false;
       switch (i) {
         case X_AXIS:
           #if X_IS_TRINAMIC
-            TMC_SET_PWMTHRS(X,X);
+            if (index == 0) TMC_SET_PWMTHRS(X,X);
           #endif
           #if X2_IS_TRINAMIC
-            TMC_SET_PWMTHRS(X,X2);
+            if (index == 1) TMC_SET_PWMTHRS(X,X2);
           #endif
           break;
         case Y_AXIS:
           #if Y_IS_TRINAMIC
-            TMC_SET_PWMTHRS(Y,Y);
+            if (index == 0) TMC_SET_PWMTHRS(Y,Y);
           #endif
           #if Y2_IS_TRINAMIC
-            TMC_SET_PWMTHRS(Y,Y2);
+            if (index == 1) TMC_SET_PWMTHRS(Y,Y2);
           #endif
           break;
         case Z_AXIS:
           #if Z_IS_TRINAMIC
-            TMC_SET_PWMTHRS(Z,Z);
+            if (index == 0) TMC_SET_PWMTHRS(Z,Z);
           #endif
           #if Z2_IS_TRINAMIC
-            TMC_SET_PWMTHRS(Z,Z2);
-          #endif
-          break;
-        case E_AXIS:
-          #if E0_IS_TRINAMIC
-            TMC_SET_PWMTHRS_E(0);
-          #endif
-          #if E1_IS_TRINAMIC
-            TMC_SET_PWMTHRS_E(1);
-          #endif
-          #if E2_IS_TRINAMIC
-            TMC_SET_PWMTHRS_E(2);
-          #endif
-          #if E3_IS_TRINAMIC
-            TMC_SET_PWMTHRS_E(3);
-          #endif
-          #if E4_IS_TRINAMIC
-            TMC_SET_PWMTHRS_E(4);
+            if (index == 1) TMC_SET_PWMTHRS(Z,Z2);
           #endif
           break;
+        case E_AXIS: {
+          if (get_target_extruder_from_command()) return;
+          switch (target_extruder) {
+            #if E0_IS_TRINAMIC
+              case 0: TMC_SET_PWMTHRS_E(0); break;
+            #endif
+            #if E_STEPPERS > 1 && E1_IS_TRINAMIC
+              case 1: TMC_SET_PWMTHRS_E(1); break;
+            #endif
+            #if E_STEPPERS > 2 && E2_IS_TRINAMIC
+              case 2: TMC_SET_PWMTHRS_E(2); break;
+            #endif
+            #if E_STEPPERS > 3 && E3_IS_TRINAMIC
+              case 3: TMC_SET_PWMTHRS_E(3); break;
+            #endif
+            #if E_STEPPERS > 4 && E4_IS_TRINAMIC
+              case 4: TMC_SET_PWMTHRS_E(4); break;
+            #endif
+          }
+        } break;
       }
     }
 
@@ -162,16 +166,16 @@ void GcodeSuite::M912() {
         #if E0_IS_TRINAMIC
           TMC_SAY_PWMTHRS_E(0);
         #endif
-        #if E1_IS_TRINAMIC
+        #if E_STEPPERS > 1 && E1_IS_TRINAMIC
           TMC_SAY_PWMTHRS_E(1);
         #endif
-        #if E2_IS_TRINAMIC
+        #if E_STEPPERS > 2 && E2_IS_TRINAMIC
           TMC_SAY_PWMTHRS_E(2);
         #endif
-        #if E3_IS_TRINAMIC
+        #if E_STEPPERS > 3 && E3_IS_TRINAMIC
           TMC_SAY_PWMTHRS_E(3);
         #endif
-        #if E4_IS_TRINAMIC
+        #if E_STEPPERS > 4 && E4_IS_TRINAMIC
           TMC_SAY_PWMTHRS_E(4);
         #endif
         break;
@@ -188,32 +192,33 @@ void GcodeSuite::M912() {
     #define TMC_SET_SGT(Q) tmc_set_sgt(stepper##Q, TMC_##Q, value)
 
     bool report = true;
+    const uint8_t index = parser.byteval('I');
     LOOP_XYZ(i) if (parser.seen(axis_codes[i])) {
       const int8_t value = (int8_t)constrain(parser.value_int(), -63, 64);
       report = false;
       switch (i) {
         case X_AXIS:
           #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)
-            TMC_SET_SGT(X);
+            if (index == 0) TMC_SET_SGT(X);
           #endif
           #if ENABLED(X2_IS_TMC2130)
-            TMC_SET_SGT(X2);
+            if (index == 1) TMC_SET_SGT(X2);
           #endif
           break;
         case Y_AXIS:
           #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)
-            TMC_SET_SGT(Y);
+            if (index == 0) TMC_SET_SGT(Y);
           #endif
           #if ENABLED(Y2_IS_TMC2130)
-            TMC_SET_SGT(Y2);
+            if (index == 1) TMC_SET_SGT(Y2);
           #endif
           break;
         case Z_AXIS:
           #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)
-            TMC_SET_SGT(Z);
+            if (index == 0) TMC_SET_SGT(Z);
           #endif
           #if ENABLED(Z2_IS_TMC2130)
-            TMC_SET_SGT(Z2);
+            if (index == 1) TMC_SET_SGT(Z2);
           #endif
           break;
       }
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index eb1d9db1d..f45307106 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -1892,6 +1892,14 @@ void MarlinSettings::reset(PORTARG_SOLO) {
 
   #define CONFIG_ECHO_START do{ if (!forReplay) SERIAL_ECHO_START_P(port); }while(0)
 
+  #if HAS_TRINAMIC
+    void say_M906() { SERIAL_ECHOPGM_P(port, "  M906 "); }
+    void say_M913() { SERIAL_ECHOPGM_P(port, "  M913 "); }
+    #if ENABLED(SENSORLESS_HOMING)
+      void say_M914() { SERIAL_ECHOPGM_P(port, "  M914 "); }
+    #endif
+  #endif
+
   #if ENABLED(ADVANCED_PAUSE_FEATURE)
     void say_M603() { SERIAL_ECHOPGM_P(port, "  M603 "); }
   #endif
@@ -2373,34 +2381,51 @@ void MarlinSettings::reset(PORTARG_SOLO) {
         SERIAL_ECHOLNPGM_P(port, "Stepper driver current:");
       }
       CONFIG_ECHO_START;
-      SERIAL_ECHOPGM_P(port, "  M906");
       #if X_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " X", stepperX.getCurrent());
-      #elif X2_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " X", stepperX2.getCurrent());
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "X", stepperX.getCurrent());
+      #endif
+      #if X2_IS_TRINAMIC
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "I1 X", stepperX2.getCurrent());
       #endif
       #if Y_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " Y", stepperY.getCurrent());
-      #elif Y2_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " Y", stepperY2.getCurrent());
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "Y", stepperY.getCurrent());
+      #endif
+      #if Y2_IS_TRINAMIC
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "I1 Y", stepperY2.getCurrent());
       #endif
       #if Z_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " Z", stepperZ.getCurrent());
-      #elif Z2_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " Z", stepperZ2.getCurrent());
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "Z", stepperZ.getCurrent());
+      #endif
+      #if Z2_IS_TRINAMIC
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "I1 Z", stepperZ2.getCurrent());
       #endif
       #if E0_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " E", stepperE0.getCurrent());
-      #elif E1_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " E", stepperE1.getCurrent());
-      #elif E2_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " E", stepperE2.getCurrent());
-      #elif E3_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " E", stepperE3.getCurrent());
-      #elif E4_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " E", stepperE4.getCurrent());
-      #endif
-      SERIAL_EOL();
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "T0 E", stepperE0.getCurrent());
+      #endif
+      #if E_STEPPERS > 1 && E1_IS_TRINAMIC
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "T1 E", stepperE1.getCurrent());
+      #endif
+      #if E_STEPPERS > 2 && E2_IS_TRINAMIC
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "T2 E", stepperE2.getCurrent());
+      #endif
+      #if E_STEPPERS > 3 && E3_IS_TRINAMIC
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "T3 E", stepperE3.getCurrent());
+      #endif
+      #if E_STEPPERS > 4 && E4_IS_TRINAMIC
+        say_M906();
+        SERIAL_ECHOLNPAIR_P(port, "T4 E", stepperE4.getCurrent());
+      #endif
+      SERIAL_EOL_P(port);
 
       /**
        * TMC2130 / TMC2208 / TRAMS Hybrid Threshold
@@ -2410,34 +2435,51 @@ void MarlinSettings::reset(PORTARG_SOLO) {
         SERIAL_ECHOLNPGM_P(port, "Hybrid Threshold:");
       }
       CONFIG_ECHO_START;
-      SERIAL_ECHOPGM_P(port, "  M913");
       #if X_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X));
-      #elif X2_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X2));
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "X", TMC_GET_PWMTHRS(X, X));
+      #endif
+      #if X2_IS_TRINAMIC
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "I1 X", TMC_GET_PWMTHRS(X, X2));
       #endif
       #if Y_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y));
-      #elif Y2_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y2));
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "Y", TMC_GET_PWMTHRS(Y, Y));
+      #endif
+      #if Y2_IS_TRINAMIC
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "I1 Y", TMC_GET_PWMTHRS(Y, Y2));
       #endif
       #if Z_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z));
-      #elif Z2_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z2));
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "Z", TMC_GET_PWMTHRS(Z, Z));
+      #endif
+      #if Z2_IS_TRINAMIC
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "I1 Z", TMC_GET_PWMTHRS(Z, Z2));
       #endif
       #if E0_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " E", TMC_GET_PWMTHRS(E, E0));
-      #elif E1_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " E", TMC_GET_PWMTHRS(E, E1));
-      #elif E2_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " E", TMC_GET_PWMTHRS(E, E2));
-      #elif E3_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " E", TMC_GET_PWMTHRS(E, E3));
-      #elif E4_IS_TRINAMIC
-        SERIAL_ECHOPAIR_P(port, " E", TMC_GET_PWMTHRS(E, E4));
-      #endif
-      SERIAL_EOL();
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "T0 E", TMC_GET_PWMTHRS(E, E0));
+      #endif
+      #if E_STEPPERS > 1 && E1_IS_TRINAMIC
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "T1 E", TMC_GET_PWMTHRS(E, E1));
+      #endif
+      #if E_STEPPERS > 2 && E2_IS_TRINAMIC
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "T2 E", TMC_GET_PWMTHRS(E, E2));
+      #endif
+      #if E_STEPPERS > 3 && E3_IS_TRINAMIC
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "T3 E", TMC_GET_PWMTHRS(E, E3));
+      #endif
+      #if E_STEPPERS > 4 && E4_IS_TRINAMIC
+        say_M913();
+        SERIAL_ECHOLNPAIR_P(port, "T4 E", TMC_GET_PWMTHRS(E, E4));
+      #endif
+      SERIAL_EOL_P(port);
 
       /**
        * TMC2130 Sensorless homing thresholds
@@ -2448,29 +2490,37 @@ void MarlinSettings::reset(PORTARG_SOLO) {
           SERIAL_ECHOLNPGM_P(port, "Sensorless homing threshold:");
         }
         CONFIG_ECHO_START;
-        SERIAL_ECHOPGM_P(port, "  M914");
         #ifdef X_HOMING_SENSITIVITY
           #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)
-            SERIAL_ECHOPAIR_P(port, " X", stepperX.sgt());
-          #elif ENABLED(X2_IS_TMC2130)
-            SERIAL_ECHOPAIR_P(port, " X", stepperX2.sgt());
+            say_M914();
+            SERIAL_ECHOLNPAIR_P(port, "X", stepperX.sgt());
+          #endif
+          #if ENABLED(X2_IS_TMC2130)
+            say_M914();
+            SERIAL_ECHOLNPAIR_P(port, "I1 X", stepperX2.sgt());
           #endif
         #endif
         #ifdef Y_HOMING_SENSITIVITY
           #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)
-            SERIAL_ECHOPAIR_P(port, " Y", stepperY.sgt());
-          #elif ENABLED(Y2_IS_TMC2130)
-            SERIAL_ECHOPAIR_P(port, " Y", stepperY2.sgt());
+            say_M914();
+            SERIAL_ECHOLNPAIR_P(port, "Y", stepperY.sgt());
+          #endif
+          #if ENABLED(Y2_IS_TMC2130)
+            say_M914();
+            SERIAL_ECHOLNPAIR_P(port, "I1 Y", stepperY2.sgt());
           #endif
         #endif
         #ifdef Z_HOMING_SENSITIVITY
           #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)
-            SERIAL_ECHOPAIR_P(port, " Z", stepperZ.sgt());
-          #elif ENABLED(Z2_IS_TMC2130)
-            SERIAL_ECHOPAIR_P(port, " Z", stepperZ2.sgt());
+            say_M914();
+            SERIAL_ECHOLNPAIR_P(port, "Z", stepperZ.sgt());
+          #endif
+          #if ENABLED(Z2_IS_TMC2130)
+            say_M914();
+            SERIAL_ECHOLNPAIR_P(port, "I1 Z", stepperZ2.sgt());
           #endif
         #endif
-        SERIAL_EOL();
+        SERIAL_EOL_P(port);
       #endif
 
     #endif // HAS_TRINAMIC