From 965b0ab53e834e7e272d2d698560f70b17c86a90 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 1 Oct 2017 21:33:52 -0500 Subject: [PATCH] Spacing adjustments --- Marlin/src/inc/SPI.h | 2 +- Marlin/src/inc/SanityCheck.h | 2 +- Marlin/src/module/probe.cpp | 2 +- Marlin/src/module/stepper.cpp | 4 +- Marlin/src/pins/pins_ANET_10.h | 2 +- Marlin/src/pins/pins_RAMPS_RE_ARM.h | 53 +++++++++----------- frameworks/CMSIS/LPC1768/include/lpc_types.h | 10 ++-- 7 files changed, 35 insertions(+), 40 deletions(-) diff --git a/Marlin/src/inc/SPI.h b/Marlin/src/inc/SPI.h index 237bf2743..3fa0cecce 100644 --- a/Marlin/src/inc/SPI.h +++ b/Marlin/src/inc/SPI.h @@ -1,7 +1,7 @@ #include -#if !defined(SPI_FULL_SPEED) +#ifndef SPI_FULL_SPEED /** * SPI speed where 0 <= index <= 6 diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 3609c4a34..404e93b6d 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -632,7 +632,7 @@ static_assert(1 >= 0 /** * Make sure Z raise values are set */ - #if !defined(Z_CLEARANCE_DEPLOY_PROBE) + #ifndef Z_CLEARANCE_DEPLOY_PROBE #error "You must define Z_CLEARANCE_DEPLOY_PROBE in your configuration." #elif !defined(Z_CLEARANCE_BETWEEN_PROBES) #error "You must define Z_CLEARANCE_BETWEEN_PROBES in your configuration." diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index 9c044b0d3..98185f6a5 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -276,7 +276,7 @@ inline void do_probe_raise(const float z_raise) { #endif } -#endif +#endif // Z_PROBE_ALLEN_KEY #if ENABLED(PROBING_FANS_OFF) diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp index bd553c8a9..b95d22356 100644 --- a/Marlin/src/module/stepper.cpp +++ b/Marlin/src/module/stepper.cpp @@ -323,7 +323,7 @@ void Stepper::isr() { HAL_TIMER_TYPE ocr_val; - #if defined(CPU_32_BIT) + #ifdef CPU_32_BIT #define ENDSTOP_NOMINAL_OCR_VAL 1500 * HAL_TICKS_PER_US // check endstops every 1.5ms to guarantee two stepper ISRs within 5ms for BLTouch #define OCR_VAL_TOLERANCE 500 * HAL_TICKS_PER_US // First max delay is 2.0ms, last min delay is 0.5ms, all others 1.5ms #else @@ -335,7 +335,7 @@ void Stepper::isr() { // Disable Timer0 ISRs and enable global ISR again to capture UART events (incoming chars) DISABLE_TEMPERATURE_INTERRUPT(); // Temperature ISR DISABLE_STEPPER_DRIVER_INTERRUPT(); - #if !defined(CPU_32_BIT) + #ifndef CPU_32_BIT sei(); #endif #endif diff --git a/Marlin/src/pins/pins_ANET_10.h b/Marlin/src/pins/pins_ANET_10.h index 8668681bf..943e1cdfe 100644 --- a/Marlin/src/pins/pins_ANET_10.h +++ b/Marlin/src/pins/pins_ANET_10.h @@ -88,7 +88,7 @@ * Many thanks to Hans Raaf (@oderwat) for developing the Anet-specific software and supporting the Anet community. */ -#if !defined(__AVR_ATmega1284P__) +#ifndef __AVR_ATmega1284P__ #error "Oops! Make sure you have 'Anet V1.0', 'Anet V1.0 (Optiboot)' or 'Sanguino' selected from the 'Tools -> Boards' menu." #endif diff --git a/Marlin/src/pins/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/pins_RAMPS_RE_ARM.h index 57606c032..bc33ee4de 100644 --- a/Marlin/src/pins/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/pins_RAMPS_RE_ARM.h @@ -66,7 +66,7 @@ #define Y_MAX_PIN 15 //10k pullup to 3.3V, 1K series #define Z_MIN_PIN 18 //10k pullup to 3.3V, 1K series #define Z_MAX_PIN 19 //10k pullup to 3.3V, 1K series -//#define Z_probe_pin 1 // AUX-1 +//#define Z_PROBE_PIN 1 // AUX-1 // @@ -267,23 +267,18 @@ //#define SHIFT_EN 41 // J5-4 & AUX-4 #endif - #if ENABLED(SDSUPPORT) - #define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM - // When going up/down directory levels the SD card is - // accessed but the garbage/lines are removed when the - // LCD updates - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 255 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #endif - #endif + #define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM + // When going up/down directory levels the SD card is + // accessed but the garbage/lines are removed when the + // LCD updates + + #define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #if ENABLED(VIKI2) || ENABLED(miniVIKI) // #define LCD_SCREEN_ROT_180 @@ -307,7 +302,7 @@ #undef LCD_PINS_D5 //59 // J3-8 & AUX-2 #define DOGLCD_A0 59 // J3-8 & AUX-2 #undef LCD_PINS_D6 //63 // J5-3 & AUX-2 - #undef LCD_PINS_D7 //6 // (SERVO1) J5-1 & SERVO connector + #undef LCD_PINS_D7 // 6 // (SERVO1) J5-1 & SERVO connector #define DOGLCD_SCK SCK_PIN #define DOGLCD_MOSI MOSI_PIN @@ -335,17 +330,17 @@ // Ethernet pins // #ifndef ULTIPANEL -#define ENET_MDIO 71 // J12-4 -#define ENET_RX_ER 73 // J12-6 -#define ENET_RXD1 75 // J12-8 + #define ENET_MDIO 71 // J12-4 + #define ENET_RX_ER 73 // J12-6 + #define ENET_RXD1 75 // J12-8 #endif -#define ENET_MOC 70 // J12-3 -#define REF_CLK 72 // J12-5 -#define ENET_RXD0 74 // J12-7 -#define ENET_CRS 76 // J12-9 -#define ENET_TX_EN 77 // J12-10 -#define ENET_TXD0 78 // J12-11 -#define ENET_TXD1 79 // J12-12 +#define ENET_MOC 70 // J12-3 +#define REF_CLK 72 // J12-5 +#define ENET_RXD0 74 // J12-7 +#define ENET_CRS 76 // J12-9 +#define ENET_TX_EN 77 // J12-10 +#define ENET_TXD0 78 // J12-11 +#define ENET_TXD1 79 // J12-12 /** * PWMS diff --git a/frameworks/CMSIS/LPC1768/include/lpc_types.h b/frameworks/CMSIS/LPC1768/include/lpc_types.h index 9ba3d2290..690f226c4 100644 --- a/frameworks/CMSIS/LPC1768/include/lpc_types.h +++ b/frameworks/CMSIS/LPC1768/include/lpc_types.h @@ -134,7 +134,7 @@ typedef int32_t(*PFI)(); /* NULL pointer */ #ifndef NULL -#define NULL ((void*) 0) + #define NULL ((void*) 0) #endif /* Number of elements in an array */ @@ -145,11 +145,11 @@ typedef int32_t(*PFI)(); /* External data/function define */ #define EXTERN extern -#if !defined(MAX) -#define MAX(a, b) (((a) > (b)) ? (a) : (b)) +#ifndef MAX + #define MAX(a, b) (((a) > (b)) ? (a) : (b)) #endif -#if !defined(MIN) -#define MIN(a, b) (((a) < (b)) ? (a) : (b)) +#ifndef MIN + #define MIN(a, b) (((a) < (b)) ? (a) : (b)) #endif /**