diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index 9ccd57566..eb0526787 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -130,6 +130,10 @@
#include "feature/leds/tempstat.h"
#endif
+#if HAS_CASE_LIGHT
+ #include "feature/caselight.h"
+#endif
+
bool Running = true;
/**
@@ -358,8 +362,6 @@ void quickstop_stepper() {
SYNC_PLAN_POSITION_KINEMATIC();
}
-#include "gcode/feature/caselight/M355.h"
-
#if ENABLED(MIXING_EXTRUDER)
#include "gcode/feature/mixing/M163.h"
#if MIXING_VIRTUAL_TOOLS > 1
@@ -859,8 +861,6 @@ void setup() {
#endif
#if HAS_CASE_LIGHT
- case_light_on = CASE_LIGHT_DEFAULT_ON;
- case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS;
update_case_light();
#endif
diff --git a/Marlin/src/feature/caselight.cpp b/Marlin/src/feature/caselight.cpp
new file mode 100644
index 000000000..6d755ff9d
--- /dev/null
+++ b/Marlin/src/feature/caselight.cpp
@@ -0,0 +1,46 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#include "../inc/MarlinConfig.h"
+
+#if HAS_CASE_LIGHT
+
+int case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS;
+bool case_light_on = CASE_LIGHT_DEFAULT_ON;
+
+#ifndef INVERT_CASE_LIGHT
+ #define INVERT_CASE_LIGHT false
+#endif
+
+void update_case_light() {
+ SET_OUTPUT(CASE_LIGHT_PIN);
+ uint8_t case_light_bright = (uint8_t)case_light_brightness;
+ if (case_light_on) {
+ if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) {
+ analogWrite(CASE_LIGHT_PIN, INVERT_CASE_LIGHT ? 255 - case_light_brightness : case_light_brightness );
+ }
+ else WRITE(CASE_LIGHT_PIN, INVERT_CASE_LIGHT ? LOW : HIGH);
+ }
+ else WRITE(CASE_LIGHT_PIN, INVERT_CASE_LIGHT ? HIGH : LOW);
+}
+
+#endif // HAS_CASE_LIGHT
diff --git a/Marlin/src/feature/caselight.h b/Marlin/src/feature/caselight.h
new file mode 100644
index 000000000..98b8c7d52
--- /dev/null
+++ b/Marlin/src/feature/caselight.h
@@ -0,0 +1,31 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#ifndef __CASELIGHT_H__
+#define __CASELIGHT_H__
+
+extern int case_light_brightness; // LCD routine wants INT
+extern bool case_light_on;
+
+void update_case_light();
+
+#endif // __CASELIGHT_H__
diff --git a/Marlin/src/gcode/feature/caselight/M355.h b/Marlin/src/gcode/feature/caselight/M355.cpp
similarity index 73%
rename from Marlin/src/gcode/feature/caselight/M355.h
rename to Marlin/src/gcode/feature/caselight/M355.cpp
index 4a8edaf8a..2daebf61a 100644
--- a/Marlin/src/gcode/feature/caselight/M355.h
+++ b/Marlin/src/gcode/feature/caselight/M355.cpp
@@ -20,27 +20,13 @@
*
*/
-#if HAS_CASE_LIGHT
+#include "../../gcode.h"
- #ifndef INVERT_CASE_LIGHT
- #define INVERT_CASE_LIGHT false
- #endif
- int case_light_brightness; // LCD routine wants INT
- bool case_light_on;
+#include "../../../inc/MarlinConfig.h"
- void update_case_light() {
- pinMode(CASE_LIGHT_PIN, OUTPUT); // digitalWrite doesn't set the port mode
- uint8_t case_light_bright = (uint8_t)case_light_brightness;
- if (case_light_on) {
- if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) {
- analogWrite(CASE_LIGHT_PIN, INVERT_CASE_LIGHT ? 255 - case_light_brightness : case_light_brightness );
- }
- else WRITE(CASE_LIGHT_PIN, INVERT_CASE_LIGHT ? LOW : HIGH);
- }
- else WRITE(CASE_LIGHT_PIN, INVERT_CASE_LIGHT ? HIGH : LOW);
- }
-
-#endif // HAS_CASE_LIGHT
+#if HAS_CASE_LIGHT
+ #include "../../../feature/caselight.h"
+#endif
/**
* M355: Turn case light on/off and set brightness
@@ -54,7 +40,7 @@
* M355 P200 S0 turns off the light & sets the brightness level
* M355 S1 turns on the light with a brightness of 200 (assuming a PWM pin)
*/
-void gcode_M355() {
+void GcodeSuite::M355() {
#if HAS_CASE_LIGHT
uint8_t args = 0;
if (parser.seenval('P')) ++args, case_light_brightness = parser.value_byte();
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index 971da19aa..065bf1fe2 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -119,7 +119,6 @@ void GcodeSuite::dwell(millis_t time) {
extern void gcode_M163();
extern void gcode_M164();
extern void gcode_M165();
-extern void gcode_M355();
extern void gcode_M999();
extern void gcode_T(uint8_t tmp_extruder);
@@ -676,9 +675,7 @@ void GcodeSuite::process_next_command() {
case 351: M351(); break; // M351: Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low.
#endif
- case 355: // M355 set case light brightness
- gcode_M355();
- break;
+ case 355: M355(); break; // M355: Set case light brightness
#if ENABLED(DEBUG_GCODE_PARSER)
case 800: