From 80f9473fb429695d97f176d5d84151345639b1f8 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 1 Oct 2018 18:53:09 -0500 Subject: [PATCH] Clean up some Travis tests --- buildroot/share/tests/DUE_tests | 1 - buildroot/share/tests/LPC1768_tests | 35 ++++++----- buildroot/share/tests/megaatmega2560_tests | 67 +++++++++++----------- buildroot/share/tests/teensy35_tests | 19 +++--- 4 files changed, 60 insertions(+), 62 deletions(-) diff --git a/buildroot/share/tests/DUE_tests b/buildroot/share/tests/DUE_tests index e4e707cb7..ead7a5da4 100755 --- a/buildroot/share/tests/DUE_tests +++ b/buildroot/share/tests/DUE_tests @@ -28,7 +28,6 @@ exec_test $1 $2 "RADDS Z_TRIPLE" restore_configs opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF opt_set EXTRUDERS 2 -opt_enable NUM_SERVOS opt_set NUM_SERVOS 1 opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER exec_test $1 $2 "SWITCHING_EXTRUDER" diff --git a/buildroot/share/tests/LPC1768_tests b/buildroot/share/tests/LPC1768_tests index c7c22711d..ea3f1e9d4 100755 --- a/buildroot/share/tests/LPC1768_tests +++ b/buildroot/share/tests/LPC1768_tests @@ -23,7 +23,6 @@ exec_test $1 $2 "Azteeg X5GT Example Config" restore_configs opt_set MOTHERBOARD BOARD_MKS_SBASE opt_set EXTRUDERS 2 -opt_enable NUM_SERVOS opt_set NUM_SERVOS 1 opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER exec_test $1 $2 "MKS_SBASE SWITCHING_EXTRUDER" @@ -34,30 +33,30 @@ opt_set EXTRUDERS 2 opt_set TEMP_SENSOR_0 1 opt_set TEMP_SENSOR_1 5 opt_set TEMP_SENSOR_BED 1 -opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT -opt_enable FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY -opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE -opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY -opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT -opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE +opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \ + FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY \ + FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ + BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \ + PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT +opt_enable_adv ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \ + LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA opt_set GRID_MAX_POINTS_X 16 exec_test $1 $2 "MKS SBASE Many Features" restore_configs opt_set MOTHERBOARD BOARD_MKS_SBASE -opt_enable COREYX +opt_enable COREYX USE_XMAX_PLUG \ + REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT \ + FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \ + FAN_SOFT_PWM SDSUPPORT +opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \ + ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \ + VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \ + EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \ + MENU_ADDAUTOSTART SDCARD_SORT_ALPHA opt_set_adv FAN_MIN_PWM 50 opt_set_adv FAN_KICKSTART_TIME 100 opt_set_adv XY_FREQUENCY_LIMIT 15 -opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME -opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK -opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL -opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS -opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA -opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT -opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR -opt_enable FAN_SOFT_PWM SDSUPPORT -opt_enable USE_XMAX_PLUG exec_test $1 $2 "MKS SBASE Many less common options" restore_configs @@ -71,5 +70,5 @@ opt_set Z_DRIVER_TYPE TMC2130 opt_enable_adv TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG SENSORLESS_PROBING exec_test $1 $2 "Delta Config (generic) + BOARD_COHESION3D_REMIX + UBL + EEPROM_SETTINGS + SENSORLESS_PROBING" -#clean up +# clean up restore_configs diff --git a/buildroot/share/tests/megaatmega2560_tests b/buildroot/share/tests/megaatmega2560_tests index 7a625e665..7477289d5 100755 --- a/buildroot/share/tests/megaatmega2560_tests +++ b/buildroot/share/tests/megaatmega2560_tests @@ -23,12 +23,12 @@ opt_set TEMP_SENSOR_0 -2 opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_BED 1 opt_set POWER_SUPPLY 1 -opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING -opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING -opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR -opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE -opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE -opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING +opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING \ + REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING \ + BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR \ + AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE +opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \ + FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING opt_set GRID_MAX_POINTS_X 16 opt_set_adv FANMUX0_PIN 53 exec_test $1 $2 "Extruders(2) MAX6675 Fixed Probe etc" @@ -43,10 +43,10 @@ opt_set TEMP_SENSOR_2 5 opt_set TEMP_SENSOR_3 20 opt_set TEMP_SENSOR_4 999 opt_set TEMP_SENSOR_BED 1 -opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION -opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT -opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI -opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION +opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \ + EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT +opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI \ + CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION exec_test $1 $2 "Probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders" # # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language @@ -61,9 +61,9 @@ exec_test $1 $2 "Add a Sled Z Probe, use UBL Cartesian moves, use Japanese langu # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES # restore_configs -opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE +opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \ + AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT opt_set NUM_SERVOS 1 -opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET exec_test $1 $2 "Servo Probe with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS etc" # @@ -84,12 +84,13 @@ exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD" # restore_configs opt_set MOTHERBOARD BOARD_MINIRAMBO -opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER -opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT -opt_enable ULTIMAKERCONTROLLER SDSUPPORT -opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 -opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS -opt_enable_adv ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL +opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER \ + EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \ + ULTIMAKERCONTROLLER SDSUPPORT \ + PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 +opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS \ + ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE \ + LCD_INFO_MENU M114_DETAIL opt_set_adv PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }" opt_set_adv I2C_SLAVE_ADDRESS 63 exec_test $1 $2 "MINIRAMBO for PWM_MOTOR_CURRENT etc" @@ -131,20 +132,19 @@ exec_test $1 $2 "DUAL_X_CARRIAGE" # restore_configs opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO -opt_enable COREYX +opt_enable COREYX USE_XMAX_PLUG \ + REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT \ + FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \ + ENDSTOP_INTERRUPTS_FEATURE ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM SDSUPPORT \ + SWITCHING_TOOLHEAD NUM_SERVOS DEBUG_LEVELING_FEATURE opt_set_adv FAN_MIN_PWM 50 opt_set_adv FAN_KICKSTART_TIME 100 opt_set_adv XY_FREQUENCY_LIMIT 15 -opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME -opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK -opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL -opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS -opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA -opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT -opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR -opt_enable ENDSTOP_INTERRUPTS_FEATURE ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM SDSUPPORT -opt_enable USE_XMAX_PLUG -opt_enable SWITCHING_TOOLHEAD NUM_SERVOS DEBUG_LEVELING_FEATURE +opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \ + ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \ + VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \ + EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \ + MENU_ADDAUTOSTART SDCARD_SORT_ALPHA opt_set EXTRUDERS 2 opt_set TEMP_SENSOR_1 -4 opt_set SERVO_DELAY "{ 300, 300, 300 }" @@ -264,8 +264,8 @@ exec_test $1 $2 "Delta Config (generic) + ABL bilinear + PROBE_MANUALLY" # Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS # use_example_configs delta/generic -opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT -opt_enable OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY +opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT \ + OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY exec_test $1 $2 "Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS" # # Delta Config (FLSUN AC because it's complex) @@ -281,7 +281,8 @@ exec_test $1 $2 "Delta Config (FLSUN AC because it's complex)" # SCARA with TMC2130 # use_example_configs SCARA -opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE PAUSE_BEFORE_DEPLOY_STOW USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER +opt_enable USE_ZMIN_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW \ + EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER opt_set X_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130 opt_set Z_DRIVER_TYPE TMC2130 @@ -307,5 +308,5 @@ exec_test $1 $2 "TMC2208 Config" # # -#clean up +# clean up restore_configs diff --git a/buildroot/share/tests/teensy35_tests b/buildroot/share/tests/teensy35_tests index c20fbfdd0..d087da2c8 100755 --- a/buildroot/share/tests/teensy35_tests +++ b/buildroot/share/tests/teensy35_tests @@ -18,11 +18,11 @@ opt_set EXTRUDERS 2 opt_set TEMP_SENSOR_0 1 opt_set TEMP_SENSOR_1 5 opt_set TEMP_SENSOR_BED 1 -opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT -opt_enable FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY -opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE -opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY -opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER +opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \ + FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY \ + FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ + BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \ + PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE opt_set_adv I2C_SLAVE_ADDRESS 63 opt_set GRID_MAX_POINTS_X 16 @@ -31,16 +31,16 @@ exec_test $1 $2 "As many features together as possible" # Test a Sled Z Probe with Linear leveling # restore_configs -opt_enable Z_PROBE_SLED -opt_enable AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE EEPROM_SETTINGS +opt_enable EEPROM_SETTINGS \ + Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE exec_test $1 $2 "Sled Z Probe with Linear leveling" # # Test a Servo Probe # # restore_configs -# opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE +# opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \ +# AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS # opt_set NUM_SERVOS 1 -# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS # exec_test $1 $2 "Servo Probe" # # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES @@ -66,7 +66,6 @@ exec_test $1 $2 "Mixing Extruder" # # restore_configs # opt_set EXTRUDERS 2 -# opt_enable NUM_SERVOS # opt_set NUM_SERVOS 1 # opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER # exec_test $1 $2 "SWITCHING_EXTRUDER"