From 7342d5c07a36283b91774ec5ad4ba2929a03376d Mon Sep 17 00:00:00 2001 From: Bob-the-Kuhn Date: Mon, 14 Aug 2017 19:34:31 -0500 Subject: [PATCH] ST7565 --- Marlin/Conditionals_LCD.h | 16 +- Marlin/pins_RAMPS_RE_ARM.h | 91 ++++++---- Marlin/ultralcd_impl_DOGM.h | 12 +- Marlin/ultralcd_st7565_u8glib_VIKI.h | 248 +++++++++++++++++++++++++++ 4 files changed, 329 insertions(+), 38 deletions(-) create mode 100644 Marlin/ultralcd_st7565_u8glib_VIKI.h diff --git a/Marlin/Conditionals_LCD.h b/Marlin/Conditionals_LCD.h index 171ca09ce..351f33e68 100644 --- a/Marlin/Conditionals_LCD.h +++ b/Marlin/Conditionals_LCD.h @@ -39,7 +39,15 @@ #define LCD_CONTRAST_MIN 60 #define LCD_CONTRAST_MAX 140 - #elif ENABLED(MAKRPANEL) || ENABLED(MINIPANEL) + #elif ENABLED(MAKRPANEL) + + #define DOGLCD + #define ULTIPANEL + #define NEWPANEL + #define DEFAULT_LCD_CONTRAST 17 + #define U8GLIB_ST7565_64128N + + #elif ENABLED(MINIPANEL) #define DOGLCD #define ULTIPANEL @@ -76,8 +84,12 @@ #define LCD_CONTRAST_MIN 75 #define LCD_CONTRAST_MAX 115 #define DEFAULT_LCD_CONTRAST 95 + #define U8GLIB_ST7565_64128N #elif ENABLED(VIKI2) - #define DEFAULT_LCD_CONTRAST 40 + #define LCD_CONTRAST_MIN 0 + #define LCD_CONTRAST_MAX 255 + #define DEFAULT_LCD_CONTRAST 140 + #define U8GLIB_ST7565_64128N #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) #define LCD_CONTRAST_MIN 90 #define LCD_CONTRAST_MAX 130 diff --git a/Marlin/pins_RAMPS_RE_ARM.h b/Marlin/pins_RAMPS_RE_ARM.h index a188880a9..1b559ceb0 100644 --- a/Marlin/pins_RAMPS_RE_ARM.h +++ b/Marlin/pins_RAMPS_RE_ARM.h @@ -232,6 +232,28 @@ #define BEEPER_PIN 37 // not 5V tolerant + //#define BTN_EN1 31 // J3-2 & AUX-4 + #define BTN_EN2 33 // J3-4 & AUX-4 + #define BTN_ENC 35 // J3-3 & AUX-4 + + #define SD_DETECT_PIN 49 // not 5V tolerant J3-1 & AUX-3 + #define KILL_PIN 41 // J5-4 & AUX-4 + #define LCD_PINS_RS 16 // J3-7 & AUX-4 + #define LCD_SDSS 16 // J3-7 & AUX-4 + #define LCD_BACKLIGHT_PIN 16 // J3-7 & AUX-4 - only used on DOGLCD controllers + #define LCD_PINS_ENABLE 51 // (MOSI) J3-10 & AUX-3 + #define LCD_PINS_D4 52 // (SCK) J3-9 & AUX-3 + + #define LCD_PINS_D5 59 // J3-8 & AUX-2 + #define DOGLCD_A0 59 // J3-8 & AUX-2 + #define LCD_PINS_D6 63 // J5-3 & AUX-2 + #define DOGLCD_CS 63 // J5-3 & AUX-2 + #define LCD_PINS_D7 6 // (SERVO1) J5-1 & SERVO connector + + #define LCD_PINS_D5 71 // ENET_MDIO + #define LCD_PINS_D6 73 // ENET_RX_ER + #define LCD_PINS_D7 75 // ENET_RXD1 + #if ENABLED(NEWPANEL) #if ENABLED(REPRAPWORLD_KEYPAD) #define SHIFT_OUT 51 // (MOSI) J3-10 & AUX-3 @@ -245,7 +267,7 @@ //#define SHIFT_EN 41 // J5-4 & AUX-4 #endif - #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && ENABLED(SDSUPPORT) + #if ENABLED(SDSUPPORT) #define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM // When going up/down directory levels the SD card is // accessed but the garbage/lines are removed when the @@ -263,38 +285,43 @@ #endif #endif - #define BTN_EN1 31 // J3-2 & AUX-4 - #define BTN_EN2 33 // J3-4 & AUX-4 - #define BTN_ENC 35 // J3-3 & AUX-4 - - #define SD_DETECT_PIN 49 // not 5V tolerant J3-1 & AUX-3 - #define KILL_PIN 41 // J5-4 & AUX-4 - #define LCD_PINS_RS 16 // J3-7 & AUX-4 - #define LCD_SDSS 16 // J3-7 & AUX-4 - #define LCD_BACKLIGHT_PIN 16 // J3-7 & AUX-4 - only used on DOGLCD controllers - #define LCD_PINS_ENABLE 51 // (MOSI) J3-10 & AUX-3 - #define LCD_PINS_D4 52 // (SCK) J3-9 & AUX-3 - - #define LCD_PINS_D5 71 // ENET_MDIO - #define DOGLCD_A0 59 // J3-8 & AUX-2 - #define LCD_PINS_D6 73 // ENET_RX_ER - #define DOGLCD_CS 63 // J5-3 & AUX-2 - #define LCD_PINS_D7 75 // ENET_RXD1 - - - //#define MISO 50 // system defined J3-10 & AUX-3 - //#define MOSI 51 // system defined J3-10 & AUX-3 - //#define SCK 52 // system defined J3-9 & AUX-3 - //#define SS_PIN 53 // system defined J3-5 & AUX-3 - sometimes called SDSS - - - #if ENABLED(VIKI2) || ENABLED(miniVIKI) - #define LCD_SCREEN_ROT_180 - - #define STAT_LED_RED_PIN 20 // I2C connector - #define STAT_LED_BLUE_PIN 21 // I2C connector + #if ENABLED(VIKI2) || ENABLED(miniVIKI) +// #define LCD_SCREEN_ROT_180 + + #define SOFTWARE_SPI // temp to see if it fixes the "not found" error + + #undef BEEPER_PIN + #define BEEPER_PIN 37 // may change if cable changes + + #define BTN_EN1 31 // J3-2 & AUX-4 + #define BTN_EN2 33 // J3-4 & AUX-4 + #define BTN_ENC 35 // J3-3 & AUX-4 + + #define SD_DETECT_PIN 49 // not 5V tolerant J3-1 & AUX-3 + #define KILL_PIN 41 // J5-4 & AUX-4 + + #undef DOGLCD_CS + #define DOGLCD_CS 16 + #undef LCD_BACKLIGHT_PIN //16 // J3-7 & AUX-4 - only used on DOGLCD controllers + #undef LCD_PINS_ENABLE //51 // (MOSI) J3-10 & AUX-3 + #undef LCD_PINS_D4 //52 // (SCK) J3-9 & AUX-3 + + #undef LCD_PINS_D5 //59 // J3-8 & AUX-2 + #define DOGLCD_A0 59 // J3-8 & AUX-2 + #undef LCD_PINS_D6 //63 // J5-3 & AUX-2 + #undef LCD_PINS_D7 //6 // (SERVO1) J5-1 & SERVO connector + #define DOGLCD_SCK SCK_PIN + #define DOGLCD_MOSI MOSI_PIN + + #define STAT_LED_BLUE_PIN 63 // may change if cable changes + #define STAT_LED_RED_PIN 6 // may change if cable changes #endif - + //#define MISO_PIN 50 // system defined J3-10 & AUX-3 + //#define MOSI_PIN 51 // system defined J3-10 & AUX-3 + //#define SCK_PIN 52 // system defined J3-9 & AUX-3 + //#define SS_PIN 53 // system defined J3-5 & AUX-3 - sometimes called SDSS + + #if ENABLED(MINIPANEL) // GLCD features //#define LCD_CONTRAST 190 diff --git a/Marlin/ultralcd_impl_DOGM.h b/Marlin/ultralcd_impl_DOGM.h index df68ded62..8ec19cb27 100644 --- a/Marlin/ultralcd_impl_DOGM.h +++ b/Marlin/ultralcd_impl_DOGM.h @@ -44,6 +44,7 @@ */ #include "ultralcd.h" #include "ultralcd_st7920_u8glib_rrd.h" +#include "ultralcd_st7565_u8glib_VIKI.h" #include "dogm_bitmaps.h" #include "utility.h" #include "duration_t.h" @@ -171,10 +172,13 @@ // Based on the Adafruit ST7565 (http://www.adafruit.com/products/250) //U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes U8GLIB_LM6059_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes -#elif ENABLED(MAKRPANEL) || ENABLED(VIKI2) || ENABLED(miniVIKI) - // The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller as well - //U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes - U8GLIB_NHD_C12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes +#elif ENABLED(U8GLIB_ST7565_64128N) + // The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller +// U8GLIB_ST7565_64128n_2x_VIKI u8g(0); // using SW-SPI DOGLCD_MOSI != -1 && DOGLCD_SCK + U8GLIB_ST7565_64128n_2x_VIKI u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // using SW-SPI + //U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes + //U8GLIB_NHD_C12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes HWSPI + #elif ENABLED(U8GLIB_SSD1306) // Generic support for SSD1306 OLED I2C LCDs //U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes diff --git a/Marlin/ultralcd_st7565_u8glib_VIKI.h b/Marlin/ultralcd_st7565_u8glib_VIKI.h new file mode 100644 index 000000000..48198d217 --- /dev/null +++ b/Marlin/ultralcd_st7565_u8glib_VIKI.h @@ -0,0 +1,248 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef ULCDST7565_H +#define ULCDST7565_H + +#include "Marlin.h" + +#if ENABLED(U8GLIB_ST7565_64128N) + + +#define ST7565_CLK_PIN DOGLCD_SCK +#define ST7565_DAT_PIN DOGLCD_MOSI +#define ST7565_CS_PIN DOGLCD_CS +#define ST7565_A0_PIN DOGLCD_A0 + + + + + + +#include + +#define WIDTH 128 +#define HEIGHT 64 +#define PAGE_HEIGHT 8 + +//set optimization so ARDUINO optimizes this file +#pragma GCC optimize (3) + +// If you want you can define your own set of delays in Configuration.h +//#define ST7565_DELAY_1 DELAY_0_NOP +//#define ST7565_DELAY_2 DELAY_0_NOP +//#define ST7565_DELAY_3 DELAY_0_NOP + +/* +#define ST7565_DELAY_1 u8g_10MicroDelay() +#define ST7565_DELAY_2 u8g_10MicroDelay() +#define ST7565_DELAY_3 u8g_10MicroDelay() +*/ + +#if F_CPU >= 20000000 + #define CPU_ST7565_DELAY_1 DELAY_0_NOP + #define CPU_ST7565_DELAY_2 DELAY_0_NOP + #define CPU_ST7565_DELAY_3 DELAY_1_NOP +#elif (MOTHERBOARD == BOARD_3DRAG) || (MOTHERBOARD == BOARD_K8200) || (MOTHERBOARD == BOARD_K8400) + #define CPU_ST7565_DELAY_1 DELAY_0_NOP + #define CPU_ST7565_DELAY_2 DELAY_3_NOP + #define CPU_ST7565_DELAY_3 DELAY_0_NOP +#elif (MOTHERBOARD == BOARD_MINIRAMBO) + #define CPU_ST7565_DELAY_1 DELAY_0_NOP + #define CPU_ST7565_DELAY_2 DELAY_4_NOP + #define CPU_ST7565_DELAY_3 DELAY_0_NOP +#elif (MOTHERBOARD == BOARD_RAMBO) + #define CPU_ST7565_DELAY_1 DELAY_0_NOP + #define CPU_ST7565_DELAY_2 DELAY_0_NOP + #define CPU_ST7565_DELAY_3 DELAY_0_NOP +#elif F_CPU == 16000000 + #define CPU_ST7565_DELAY_1 DELAY_0_NOP + #define CPU_ST7565_DELAY_2 DELAY_0_NOP + #define CPU_ST7565_DELAY_3 DELAY_1_NOP +#else + #error "No valid condition for delays in 'ultralcd_st7565_u8glib_VIKI.h'" +#endif + +#ifndef ST7565_DELAY_1 + #define ST7565_DELAY_1 CPU_ST7565_DELAY_1 +#endif +#ifndef ST7565_DELAY_2 + #define ST7565_DELAY_2 CPU_ST7565_DELAY_2 +#endif +#ifndef ST7565_DELAY_3 + #define ST7565_DELAY_3 CPU_ST7565_DELAY_3 +#endif + +#define ST7565_SND_BIT \ + WRITE(ST7565_CLK_PIN, LOW); ST7565_DELAY_1; \ + WRITE(ST7565_DAT_PIN, val & 0x80); ST7565_DELAY_2; \ + WRITE(ST7565_CLK_PIN, HIGH); ST7565_DELAY_3; \ + WRITE(ST7565_CLK_PIN, LOW);\ + val <<= 1 + +static void ST7565_SWSPI_SND_8BIT(uint8_t val) { + ST7565_SND_BIT; // 1 + ST7565_SND_BIT; // 2 + ST7565_SND_BIT; // 3 + ST7565_SND_BIT; // 4 + ST7565_SND_BIT; // 5 + ST7565_SND_BIT; // 6 + ST7565_SND_BIT; // 7 + ST7565_SND_BIT; // 8 +} + +#if defined(DOGM_SPI_DELAY_US) && DOGM_SPI_DELAY_US > 0 + #define U8G_DELAY delayMicroseconds(DOGM_SPI_DELAY_US) +#else + #define U8G_DELAY u8g_10MicroDelay() +#endif + +#define ST7565_CS() { WRITE(ST7565_CS_PIN,1); U8G_DELAY; } +#define ST7565_NCS() { WRITE(ST7565_CS_PIN,0); } +#define ST7565_A0() { WRITE(ST7565_A0_PIN,1); U8G_DELAY; } +#define ST7565_NA0() { WRITE(ST7565_A0_PIN,0); } +#define ST7565_WRITE_BYTE(a) { ST7565_SWSPI_SND_8BIT((uint8_t)a); U8G_DELAY; } +#define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) {ST7565_SWSPI_SND_8BIT( *ptr++);} DELAY_10US; } + + +uint8_t u8g_dev_st7565_64128n_2x_VIKI_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) { + switch (msg) { + case U8G_DEV_MSG_INIT: + { OUT_WRITE(ST7565_CS_PIN, LOW); + OUT_WRITE(ST7565_DAT_PIN, LOW); + OUT_WRITE(ST7565_CLK_PIN, LOW); + OUT_WRITE(ST7565_A0_PIN, LOW); + + ST7565_CS(); /* disable chip */ + ST7565_NA0(); /* instruction mode */ + ST7565_NCS(); /* enable chip */ + + + ST7565_WRITE_BYTE(0x0A2); /* 0x0a2: LCD bias 1/9 (according to Displaytech 64128N datasheet) */ + ST7565_WRITE_BYTE(0x0A0); /* Normal ADC Select (according to Displaytech 64128N datasheet) */ + + ST7565_WRITE_BYTE(0x0c8); /* common output mode: set scan direction normal operation/SHL Select; 0x0c0 --> SHL = 0; normal; 0x0c8 --> SHL = 1 */ + ST7565_WRITE_BYTE(0x040); /* Display start line for Displaytech 64128N */ + + ST7565_WRITE_BYTE(0x028 | 0x04); /* power control: turn on voltage converter */ +// U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */ + + ST7565_WRITE_BYTE(0x028 | 0x06); /* power control: turn on voltage regulator */ +// U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */ + + ST7565_WRITE_BYTE(0x028 | 0x07); /* power control: turn on voltage follower */ +// U8G_ESC_DLY(50); /* delay 50 ms - hangs after a reset if used */ + + ST7565_WRITE_BYTE(0x010); /* Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N */ + + ST7565_WRITE_BYTE(0x0a6); /* display normal, bit val 0: LCD pixel off. */ + + ST7565_WRITE_BYTE(0x081); /* set contrast */ + ST7565_WRITE_BYTE(0x01e); /* Contrast value. Setting for controlling brightness of Displaytech 64128N */ + + + ST7565_WRITE_BYTE(0x0af); /* display on */ + + U8G_ESC_DLY(100); /* delay 100 ms */ + ST7565_WRITE_BYTE(0x0a5); /* display all points; ST7565 */ + U8G_ESC_DLY(100); /* delay 100 ms */ + U8G_ESC_DLY(100); /* delay 100 ms */ + ST7565_WRITE_BYTE(0x0a4); /* normal display */ + ST7565_CS(); /* disable chip */ + } /* end of sequence */ + break; + case U8G_DEV_MSG_STOP: + break; + case U8G_DEV_MSG_PAGE_NEXT: + { u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); + ST7565_CS(); /* disable chip */ + ST7565_NA0(); /* instruction mode */ + ST7565_NCS(); /* enable chip */ + ST7565_WRITE_BYTE(0x010); /* set upper 4 bit of the col adr to 0x10 */ + ST7565_WRITE_BYTE(0x000); /* set lower 4 bit of the col adr to 0x00. Changed for DisplayTech 64128N */ + /* end of sequence */ + ST7565_WRITE_BYTE(0x0b0 | (2*pb->p.page));; /* select current page (ST7565R) */ + ST7565_A0(); /* data mode */ + ST7560_WriteSequence( (uint8_t) pb->width, (uint8_t *)pb->buf); + ST7565_CS(); /* disable chip */ + ST7565_NA0(); /* instruction mode */ + ST7565_NCS(); /* enable chip */ + ST7565_WRITE_BYTE(0x010); /* set upper 4 bit of the col adr to 0x10 */ + ST7565_WRITE_BYTE(0x000); /* set lower 4 bit of the col adr to 0x00. Changed for DisplayTech 64128N */ + /* end of sequence */ + ST7565_WRITE_BYTE(0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */ + ST7565_A0(); /* data mode */ + ST7560_WriteSequence( (uint8_t) pb->width, (uint8_t *)(pb->buf)+pb->width); + ST7565_CS(); /* disable chip */ + } + break; + case U8G_DEV_MSG_CONTRAST: + ST7565_NCS(); + ST7565_NA0(); /* instruction mode */ + ST7565_WRITE_BYTE(0x081); + ST7565_WRITE_BYTE((*(uint8_t *)arg) >> 2); + ST7565_CS(); /* disable chip */ + return 1; + case U8G_DEV_MSG_SLEEP_ON: + ST7565_NA0(); /* instruction mode */ + ST7565_NCS(); /* enable chip */ + ST7565_WRITE_BYTE(0x0ac); /* static indicator off */ + ST7565_WRITE_BYTE(0x000); /* indicator register set (not sure if this is required) */ + ST7565_WRITE_BYTE(0x0ae); /* display off */ + ST7565_WRITE_BYTE(0x0a5); /* all points on */ + ST7565_CS(); /* disable chip , bugfix 12 nov 2014 */ + /* end of sequence */ + return 1; + case U8G_DEV_MSG_SLEEP_OFF: + ST7565_NA0(); /* instruction mode */ + ST7565_NCS(); /* enable chip */ + ST7565_WRITE_BYTE(0x0a4); /* all points off */ + ST7565_WRITE_BYTE(0x0af); /* display on */ + U8G_ESC_DLY(50); /* delay 50 ms */ + ST7565_CS(); /* disable chip , bugfix 12 nov 2014 */ + /* end of sequence */ + return 1; + } + return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg); +} + +uint8_t u8g_dev_st7565_64128n_2x_VIKI_buf[WIDTH*2] U8G_NOCOMMON ; +u8g_pb_t u8g_dev_st7565_64128n_2x_VIKI_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_st7565_64128n_2x_VIKI_buf}; +u8g_dev_t u8g_dev_st7565_64128n_2x_VIKI_sw_spi = { u8g_dev_st7565_64128n_2x_VIKI_fn, &u8g_dev_st7565_64128n_2x_VIKI_pb, &u8g_com_null_fn}; + + +class U8GLIB_ST7565_64128n_2x_VIKI : public U8GLIB { + public: + U8GLIB_ST7565_64128n_2x_VIKI(uint8_t dummy) + : U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi) + { } + U8GLIB_ST7565_64128n_2x_VIKI(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) + : U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi) + { } +}; + + + +#pragma GCC reset_options + +#endif // U8GLIB_ST7565 +#endif // ULCDST7565_H