From 6123a00e64ad9497d6838061b08b1f95e0e46d16 Mon Sep 17 00:00:00 2001 From: daid303 Date: Fri, 14 Dec 2012 11:11:02 +0100 Subject: [PATCH] Fix the german translation. --- Marlin/language.h | 139 +++++++++++++++++++++++----------------------- 1 file changed, 68 insertions(+), 71 deletions(-) diff --git a/Marlin/language.h b/Marlin/language.h index 6824e82ab..2bfe2e9da 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -507,71 +507,68 @@ #define MSG_SD_INSERTED "SDKarte erkannt" #define MSG_SD_REMOVED "SDKarte entfernt" - #define MSG_MAIN " Hauptmneü \003" - #define MSG_AUTOSTART " Autostart" - #define MSG_DISABLE_STEPPERS " Stepper abschalten" - #define MSG_AUTO_HOME " Auto Nullpunkt" - #define MSG_SET_ORIGIN " Setze Nullpunkt" - #define MSG_PREHEAT_PLA " Vorwärmen PLA" - #define MSG_PREHEAT_PLA_SETTINGS " Vorwärmen PLA Einstellungen" - #define MSG_PREHEAT_ABS " Vorwärmen ABS" - #define MSG_PREHEAT_ABS_SETTINGS " Vorwärmen ABS Einstellungen" - #define MSG_COOLDOWN " Abkühlen" - #define MSG_EXTRUDE " Extrude" - #define MSG_RETRACT " Retract" - #define MSG_MOVE_AXIS " Achsen bewegen\x7E" - #define MSG_SPEED " Geschw:" - #define MSG_NOZZLE " \002Düse:" - #define MSG_NOZZLE1 " \002Düse2:" - #define MSG_NOZZLE2 " \002Düse3:" - #define MSG_BED " \002Bett:" - #define MSG_FAN_SPEED " Lüftergeschw.:" - #define MSG_FLOW " Fluß:" - #define MSG_CONTROL " Einstellungen \003" - #define MSG_MIN " \002 Min:" - #define MSG_MAX " \002 Max:" - #define MSG_FACTOR " \002 Faktor:" - #define MSG_AUTOTEMP " AutoTemp:" - #define MSG_ON "Ein " - #define MSG_OFF "Aus " - #define MSG_PID_P " PID-P: " - #define MSG_PID_I " PID-I: " - #define MSG_PID_D " PID-D: " - #define MSG_PID_C " PID-C: " - #define MSG_ACC " Acc:" - #define MSG_VXY_JERK " Vxy-jerk: " - #define MSG_VMAX " Vmax " - #define MSG_X "x:" - #define MSG_Y "y:" - #define MSG_Z "z:" - #define MSG_E "e:" - #define MSG_VMIN " Vmin:" - #define MSG_VTRAV_MIN " VTrav min:" - #define MSG_AMAX " Amax " - #define MSG_A_RETRACT " A-Retract:" - #define MSG_XSTEPS " Xsteps/mm:" - #define MSG_YSTEPS " Ysteps/mm:" - #define MSG_ZSTEPS " Zsteps/mm:" - #define MSG_ESTEPS " Esteps/mm:" - #define MSG_MAIN_WIDE " Hauptmenü \003" - #define MSG_RECTRACT_WIDE " Rectract \x7E" - #define MSG_WATCH " Beobachten \003" - #define MSG_TEMPERATURE_WIDE " Temperatur \x7E" - #define MSG_TEMPERATURE_RTN " Temperatur \003" - #define MSG_MOTION_WIDE " Bewegung \x7E" - #define MSG_STORE_EPROM " EPROM speichern" - #define MSG_LOAD_EPROM " EPROM laden" - #define MSG_RESTORE_FAILSAFE " Standardkonfig." - #define MSG_REFRESH "\004Aktualisieren" - #define MSG_PREPARE " Vorbereitung \x7E" - #define MSG_PREPARE_ALT " Vorbereitung \003" - #define MSG_CONTROL_ARROW " Einstellungen \x7E" - #define MSG_TUNE " Justierung \x7E" - #define MSG_PAUSE_PRINT " Druck anhalten\x7E" - #define MSG_RESUME_PRINT " Druck fortsetz\x7E" - #define MSG_STOP_PRINT " Druck stoppen \x7E" - #define MSG_CARD_MENU " SDKarten Menü \x7E" - #define MSG_NO_CARD " Keine SDKarte" + #define MSG_MAIN "Hauptmneü" + #define MSG_AUTOSTART "Autostart" + #define MSG_DISABLE_STEPPERS "Stepper abschalten" + #define MSG_AUTO_HOME "Auto Nullpunkt" + #define MSG_SET_ORIGIN "Setze Nullpunkt" + #define MSG_PREHEAT_PLA "Vorwärmen PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen" + #define MSG_PREHEAT_ABS "Vorwärmen ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen" + #define MSG_COOLDOWN "Abkühlen" + #define MSG_EXTRUDE "Extrude" + #define MSG_RETRACT "Retract" + #define MSG_MOVE_AXIS "Achsen bewegen" + #define MSG_SPEED "Geschw" + #define MSG_NOZZLE "Düse" + #define MSG_NOZZLE1 "Düse2" + #define MSG_NOZZLE2 "Düse3" + #define MSG_BED "Bett" + #define MSG_FAN_SPEED "Lüftergeschw." + #define MSG_FLOW "Fluß" + #define MSG_CONTROL "Einstellungen" + #define MSG_MIN "\002 Min" + #define MSG_MAX "\002 Max" + #define MSG_FACTOR "\002 Faktor" + #define MSG_AUTOTEMP "AutoTemp" + #define MSG_ON "Ein" + #define MSG_OFF "Aus" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Acc" + #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VMAX "Vmax " + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VTrav min" + #define MSG_AMAX "Amax " + #define MSG_A_RETRACT "A-Retract" + #define MSG_XSTEPS "Xsteps/mm" + #define MSG_YSTEPS "Ysteps/mm" + #define MSG_ZSTEPS "Zsteps/mm" + #define MSG_ESTEPS "Esteps/mm" + #define MSG_RECTRACT_WIDE "Rectract" + #define MSG_WATCH "Beobachten" + #define MSG_TEMPERATURE "Temperatur" + #define MSG_MOTION "Bewegung" + #define MSG_STORE_EPROM "EPROM speichern" + #define MSG_LOAD_EPROM "EPROM laden" + #define MSG_RESTORE_FAILSAFE "Standardkonfig." + #define MSG_REFRESH "Aktualisieren" + #define MSG_PREPARE "Vorbereitung" + #define MSG_CONTROL "Einstellungen" + #define MSG_TUNE "Justierung" + #define MSG_PAUSE_PRINT "Druck anhalten" + #define MSG_RESUME_PRINT "Druck fortsetz" + #define MSG_STOP_PRINT "Druck stoppen" + #define MSG_CARD_MENU "SDKarten Menü" + #define MSG_NO_CARD "Keine SDKarte" #define MSG_DWELL "Warten..." #define MSG_USERWAIT "Warte auf Nutzer..." #define MSG_NO_MOVE "Kein Zug." @@ -579,12 +576,12 @@ #define MSG_KILLED "KILLED" #define MSG_STOPPED "GESTOPPT" #define MSG_STEPPER_RELEASED "Stepper frei" - #define MSG_CONTROL_RETRACT " Retract mm:" - #define MSG_CONTROL_RETRACTF " Retract F:" - #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" - #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" - #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" - #define MSG_AUTORETRACT " AutoRetr.:" + #define MSG_CONTROL_RETRACT "Retract mm" + #define MSG_CONTROL_RETRACTF "Retract F" + #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoRetr." // Serial Console Messages