From 5e834352a92aebd8950c1fb0a1cfdeebf743318b Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 30 Jul 2015 22:31:45 -0700 Subject: [PATCH] Overridable Options - Part 11 (PR#2563) Apply `ENABLED` / `DISABLED` macros to EEPROM-related files. --- Marlin/configuration_store.cpp | 106 ++++++++++++++++----------------- Marlin/configuration_store.h | 4 +- 2 files changed, 55 insertions(+), 55 deletions(-) diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index e7da52b09..73dae9707 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -95,7 +95,7 @@ #include "ultralcd.h" #include "configuration_store.h" -#ifdef MESH_BED_LEVELING +#if ENABLED(MESH_BED_LEVELING) #include "mesh_bed_leveling.h" #endif @@ -130,7 +130,7 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) { #define EEPROM_OFFSET 100 -#ifdef EEPROM_SETTINGS +#if ENABLED(EEPROM_SETTINGS) void Config_StoreSettings() { float dummy = 0.0f; @@ -153,7 +153,7 @@ void Config_StoreSettings() { uint8_t mesh_num_x = 3; uint8_t mesh_num_y = 3; - #ifdef MESH_BED_LEVELING + #if ENABLED(MESH_BED_LEVELING) // Compile time test that sizeof(mbl.z_values) is as expected typedef char c_assert[(sizeof(mbl.z_values) == MESH_NUM_X_POINTS*MESH_NUM_Y_POINTS*sizeof(dummy)) ? 1 : -1]; mesh_num_x = MESH_NUM_X_POINTS; @@ -171,17 +171,17 @@ void Config_StoreSettings() { for (int q=0; q 1 @@ -327,7 +327,7 @@ void Config_RetrieveSettings() { EEPROM_READ_VAR(i, dummy_uint8); EEPROM_READ_VAR(i, mesh_num_x); EEPROM_READ_VAR(i, mesh_num_y); - #ifdef MESH_BED_LEVELING + #if ENABLED(MESH_BED_LEVELING) mbl.active = dummy_uint8; if (mesh_num_x == MESH_NUM_X_POINTS && mesh_num_y == MESH_NUM_Y_POINTS) { EEPROM_READ_VAR(i, mbl.z_values); @@ -339,17 +339,17 @@ void Config_RetrieveSettings() { for (int q = 0; q < mesh_num_x * mesh_num_y; q++) EEPROM_READ_VAR(i, dummy); #endif // MESH_BED_LEVELING - #ifndef ENABLE_AUTO_BED_LEVELING + #if DISABLED(ENABLE_AUTO_BED_LEVELING) float zprobe_zoffset = 0; #endif EEPROM_READ_VAR(i, zprobe_zoffset); - #ifdef DELTA + #if ENABLED(DELTA) EEPROM_READ_VAR(i, endstop_adj); // 3 floats EEPROM_READ_VAR(i, delta_radius); // 1 float EEPROM_READ_VAR(i, delta_diagonal_rod); // 1 float EEPROM_READ_VAR(i, delta_segments_per_second); // 1 float - #elif defined(Z_DUAL_ENDSTOPS) + #elif ENABLED(Z_DUAL_ENDSTOPS) EEPROM_READ_VAR(i, z_endstop_adj); dummy = 0.0f; for (int q=5; q--;) EEPROM_READ_VAR(i, dummy); @@ -358,7 +358,7 @@ void Config_RetrieveSettings() { for (int q=6; q--;) EEPROM_READ_VAR(i, dummy); #endif - #ifndef ULTIPANEL + #if DISABLED(ULTIPANEL) int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed, absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed; #endif @@ -370,7 +370,7 @@ void Config_RetrieveSettings() { EEPROM_READ_VAR(i, absPreheatHPBTemp); EEPROM_READ_VAR(i, absPreheatFanSpeed); - #ifdef PIDTEMP + #if ENABLED(PIDTEMP) for (int e = 0; e < 4; e++) { // 4 = max extruders currently supported by Marlin EEPROM_READ_VAR(i, dummy); // Kp if (e < EXTRUDERS && dummy != DUMMY_PID_VALUE) { @@ -378,7 +378,7 @@ void Config_RetrieveSettings() { PID_PARAM(Kp, e) = dummy; EEPROM_READ_VAR(i, PID_PARAM(Ki, e)); EEPROM_READ_VAR(i, PID_PARAM(Kd, e)); - #ifdef PID_ADD_EXTRUSION_RATE + #if ENABLED(PID_ADD_EXTRUSION_RATE) EEPROM_READ_VAR(i, PID_PARAM(Kc, e)); #else EEPROM_READ_VAR(i, dummy); @@ -393,7 +393,7 @@ void Config_RetrieveSettings() { for (int q=16; q--;) EEPROM_READ_VAR(i, dummy); // 4x Kp, Ki, Kd, Kc #endif // !PIDTEMP - #ifndef PIDTEMPBED + #if DISABLED(PIDTEMPBED) float bedKp, bedKi, bedKd; #endif @@ -407,18 +407,18 @@ void Config_RetrieveSettings() { for (int q=2; q--;) EEPROM_READ_VAR(i, dummy); // bedKi, bedKd } - #ifndef HAS_LCD_CONTRAST + #if DISABLED(HAS_LCD_CONTRAST) int lcd_contrast; #endif EEPROM_READ_VAR(i, lcd_contrast); - #ifdef SCARA + #if ENABLED(SCARA) EEPROM_READ_VAR(i, axis_scaling); // 3 floats #else EEPROM_READ_VAR(i, dummy); #endif - #ifdef FWRETRACT + #if ENABLED(FWRETRACT) EEPROM_READ_VAR(i, autoretract_enabled); EEPROM_READ_VAR(i, retract_length); #if EXTRUDERS > 1 @@ -455,7 +455,7 @@ void Config_RetrieveSettings() { SERIAL_ECHOLNPGM(" bytes)"); } - #ifdef EEPROM_CHITCHAT + #if ENABLED(EEPROM_CHITCHAT) Config_PrintSettings(); #endif } @@ -474,7 +474,7 @@ void Config_ResetDefault() { axis_steps_per_unit[i] = tmp1[i]; max_feedrate[i] = tmp2[i]; max_acceleration_units_per_sq_second[i] = tmp3[i]; - #ifdef SCARA + #if ENABLED(SCARA) if (i < COUNT(axis_scaling)) axis_scaling[i] = 1; #endif @@ -494,25 +494,25 @@ void Config_ResetDefault() { max_e_jerk = DEFAULT_EJERK; home_offset[X_AXIS] = home_offset[Y_AXIS] = home_offset[Z_AXIS] = 0; - #ifdef MESH_BED_LEVELING + #if ENABLED(MESH_BED_LEVELING) mbl.active = 0; #endif - #ifdef ENABLE_AUTO_BED_LEVELING + #if ENABLED(ENABLE_AUTO_BED_LEVELING) zprobe_zoffset = Z_PROBE_OFFSET_FROM_EXTRUDER; #endif - #ifdef DELTA + #if ENABLED(DELTA) endstop_adj[X_AXIS] = endstop_adj[Y_AXIS] = endstop_adj[Z_AXIS] = 0; delta_radius = DELTA_RADIUS; delta_diagonal_rod = DELTA_DIAGONAL_ROD; delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND; recalc_delta_settings(delta_radius, delta_diagonal_rod); - #elif defined(Z_DUAL_ENDSTOPS) + #elif ENABLED(Z_DUAL_ENDSTOPS) z_endstop_adj = 0; #endif - #ifdef ULTIPANEL + #if ENABLED(ULTIPANEL) plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP; plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP; plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED; @@ -521,12 +521,12 @@ void Config_ResetDefault() { absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; #endif - #ifdef HAS_LCD_CONTRAST + #if ENABLED(HAS_LCD_CONTRAST) lcd_contrast = DEFAULT_LCD_CONTRAST; #endif - #ifdef PIDTEMP - #ifdef PID_PARAMS_PER_EXTRUDER + #if ENABLED(PIDTEMP) + #if ENABLED(PID_PARAMS_PER_EXTRUDER) for (int e = 0; e < EXTRUDERS; e++) #else int e = 0; // only need to write once @@ -535,7 +535,7 @@ void Config_ResetDefault() { PID_PARAM(Kp, e) = DEFAULT_Kp; PID_PARAM(Ki, e) = scalePID_i(DEFAULT_Ki); PID_PARAM(Kd, e) = scalePID_d(DEFAULT_Kd); - #ifdef PID_ADD_EXTRUSION_RATE + #if ENABLED(PID_ADD_EXTRUSION_RATE) PID_PARAM(Kc, e) = DEFAULT_Kc; #endif } @@ -543,13 +543,13 @@ void Config_ResetDefault() { updatePID(); #endif // PIDTEMP - #ifdef PIDTEMPBED + #if ENABLED(PIDTEMPBED) bedKp = DEFAULT_bedKp; bedKi = scalePID_i(DEFAULT_bedKi); bedKd = scalePID_d(DEFAULT_bedKd); #endif - #ifdef FWRETRACT + #if ENABLED(FWRETRACT) autoretract_enabled = false; retract_length = RETRACT_LENGTH; #if EXTRUDERS > 1 @@ -573,7 +573,7 @@ void Config_ResetDefault() { SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded"); } -#ifndef DISABLE_M503 +#if DISABLED(DISABLE_M503) /** * Print Configuration Settings - M503 @@ -598,7 +598,7 @@ void Config_PrintSettings(bool forReplay) { CONFIG_ECHO_START; - #ifdef SCARA + #if ENABLED(SCARA) if (!forReplay) { SERIAL_ECHOLNPGM("Scaling factors:"); CONFIG_ECHO_START; @@ -663,7 +663,7 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOPAIR(" Z", home_offset[Z_AXIS]); SERIAL_EOL; - #ifdef MESH_BED_LEVELING + #if ENABLED(MESH_BED_LEVELING) if (!forReplay) { SERIAL_ECHOLNPGM("Mesh bed leveling:"); CONFIG_ECHO_START; @@ -683,7 +683,7 @@ void Config_PrintSettings(bool forReplay) { } #endif - #ifdef DELTA + #if ENABLED(DELTA) CONFIG_ECHO_START; if (!forReplay) { SERIAL_ECHOLNPGM("Endstop adjustment (mm):"); @@ -700,7 +700,7 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOPAIR(" R", delta_radius); SERIAL_ECHOPAIR(" S", delta_segments_per_second); SERIAL_EOL; - #elif defined(Z_DUAL_ENDSTOPS) + #elif ENABLED(Z_DUAL_ENDSTOPS) CONFIG_ECHO_START; if (!forReplay) { SERIAL_ECHOLNPGM("Z2 Endstop adjustment (mm):"); @@ -710,7 +710,7 @@ void Config_PrintSettings(bool forReplay) { SERIAL_EOL; #endif // DELTA - #ifdef ULTIPANEL + #if ENABLED(ULTIPANEL) CONFIG_ECHO_START; if (!forReplay) { SERIAL_ECHOLNPGM("Material heatup parameters:"); @@ -727,13 +727,13 @@ void Config_PrintSettings(bool forReplay) { SERIAL_EOL; #endif // ULTIPANEL - #if defined(PIDTEMP) || defined(PIDTEMPBED) + #if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED) CONFIG_ECHO_START; if (!forReplay) { SERIAL_ECHOLNPGM("PID settings:"); } - #ifdef PIDTEMP + #if ENABLED(PIDTEMP) #if EXTRUDERS > 1 if (forReplay) { for (uint8_t i = 0; i < EXTRUDERS; i++) { @@ -742,7 +742,7 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOPAIR(" P", PID_PARAM(Kp, i)); SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, i))); SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, i))); - #ifdef PID_ADD_EXTRUSION_RATE + #if ENABLED(PID_ADD_EXTRUSION_RATE) SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, i)); #endif SERIAL_EOL; @@ -756,14 +756,14 @@ void Config_PrintSettings(bool forReplay) { SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echo values for E0 SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0))); SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0))); - #ifdef PID_ADD_EXTRUSION_RATE + #if ENABLED(PID_ADD_EXTRUSION_RATE) SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, 0)); #endif SERIAL_EOL; } #endif // PIDTEMP - #ifdef PIDTEMPBED + #if ENABLED(PIDTEMPBED) CONFIG_ECHO_START; SERIAL_ECHOPAIR(" M304 P", bedKp); SERIAL_ECHOPAIR(" I", unscalePID_i(bedKi)); @@ -773,7 +773,7 @@ void Config_PrintSettings(bool forReplay) { #endif // PIDTEMP || PIDTEMPBED - #ifdef HAS_LCD_CONTRAST + #if ENABLED(HAS_LCD_CONTRAST) CONFIG_ECHO_START; if (!forReplay) { SERIAL_ECHOLNPGM("LCD Contrast:"); @@ -783,7 +783,7 @@ void Config_PrintSettings(bool forReplay) { SERIAL_EOL; #endif - #ifdef FWRETRACT + #if ENABLED(FWRETRACT) CONFIG_ECHO_START; if (!forReplay) { @@ -857,8 +857,8 @@ void Config_PrintSettings(bool forReplay) { /** * Auto Bed Leveling */ - #ifdef ENABLE_AUTO_BED_LEVELING - #ifdef CUSTOM_M_CODES + #if ENABLED(ENABLE_AUTO_BED_LEVELING) + #if ENABLED(CUSTOM_M_CODES) if (!forReplay) { CONFIG_ECHO_START; SERIAL_ECHOLNPGM("Z-Probe Offset (mm):"); diff --git a/Marlin/configuration_store.h b/Marlin/configuration_store.h index 6f1a8fcbd..f03f24d78 100644 --- a/Marlin/configuration_store.h +++ b/Marlin/configuration_store.h @@ -5,13 +5,13 @@ void Config_ResetDefault(); -#ifndef DISABLE_M503 +#if DISABLED(DISABLE_M503) void Config_PrintSettings(bool forReplay=false); #else FORCE_INLINE void Config_PrintSettings(bool forReplay=false) {} #endif -#ifdef EEPROM_SETTINGS +#if ENABLED(EEPROM_SETTINGS) void Config_StoreSettings(); void Config_RetrieveSettings(); #else