diff --git a/Marlin/frameworks/CMSIS/LPC1768/driver/lpc17xx_emac.c b/Marlin/frameworks/CMSIS/LPC1768/driver/lpc17xx_emac.c index dc6c83061..f0e4e4627 100644 --- a/Marlin/frameworks/CMSIS/LPC1768/driver/lpc17xx_emac.c +++ b/Marlin/frameworks/CMSIS/LPC1768/driver/lpc17xx_emac.c @@ -497,7 +497,7 @@ int32_t EMAC_SetPHYMode(uint32_t ulPHYMode) #endif /* Wait to complete Auto_Negotiation */ for (tout = EMAC_PHY_RESP_TOUT; tout>=0; tout--) { - + } break; case EMAC_MODE_10M_FULL: diff --git a/Marlin/frameworks/CMSIS/LPC1768/lib/LiquidCrystal.cpp b/Marlin/frameworks/CMSIS/LPC1768/lib/LiquidCrystal.cpp index 43bce49b2..fdac56296 100644 --- a/Marlin/frameworks/CMSIS/LPC1768/lib/LiquidCrystal.cpp +++ b/Marlin/frameworks/CMSIS/LPC1768/lib/LiquidCrystal.cpp @@ -3,22 +3,22 @@ #include #include #include -#include "../../../../src/HAL/HAL_LPC1768/arduino.h" +#include // When the display powers up, it is configured as follows: // // 1. Display clear -// 2. Function set: -// DL = 1; 8-bit interface data -// N = 0; 1-line display -// F = 0; 5x8 dot character font -// 3. Display on/off control: -// D = 0; Display off -// C = 0; Cursor off -// B = 0; Blinking off -// 4. Entry mode set: -// I/D = 1; Increment by 1 -// S = 0; No shift +// 2. Function set: +// DL = 1; 8-bit interface data +// N = 0; 1-line display +// F = 0; 5x8 dot character font +// 3. Display on/off control: +// D = 0; Display off +// C = 0; Cursor off +// B = 0; Blinking off +// 4. Entry mode set: +// I/D = 1; Increment by 1 +// S = 0; No shift // // Note, however, that resetting the Arduino doesn't reset the LCD, so we // can't assume that its in that state when a sketch starts (and the @@ -57,22 +57,22 @@ void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t en _rs_pin = rs; _rw_pin = rw; _enable_pin = enable; - + _data_pins[0] = d0; _data_pins[1] = d1; _data_pins[2] = d2; - _data_pins[3] = d3; + _data_pins[3] = d3; _data_pins[4] = d4; _data_pins[5] = d5; _data_pins[6] = d6; - _data_pins[7] = d7; + _data_pins[7] = d7; if (fourbitmode) _displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS; - else + else _displayfunction = LCD_8BITMODE | LCD_1LINE | LCD_5x8DOTS; - - begin(16, 1); + + begin(16, 1); } void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) { @@ -81,7 +81,7 @@ void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) { } _numlines = lines; - setRowOffsets(0x00, 0x40, 0x00 + cols, 0x40 + cols); + setRowOffsets(0x00, 0x40, 0x00 + cols, 0x40 + cols); // for some 1 line displays you can select a 10 pixel high font if ((dotsize != LCD_5x8DOTS) && (lines == 1)) { @@ -90,28 +90,28 @@ void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) { pinMode(_rs_pin, OUTPUT); // we can save 1 pin by not using RW. Indicate by passing 255 instead of pin# - if (_rw_pin != 255) { + if (_rw_pin != 255) { pinMode(_rw_pin, OUTPUT); } pinMode(_enable_pin, OUTPUT); - + // Do these once, instead of every time a character is drawn for speed reasons. for (int i=0; i<((_displayfunction & LCD_8BITMODE) ? 8 : 4); ++i) { pinMode(_data_pins[i], OUTPUT); - } + } // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION! // according to datasheet, we need at least 40ms after power rises above 2.7V // before sending commands. Arduino can turn on way before 4.5V so we'll wait 50 - delayMicroseconds(50000); + delayMicroseconds(50000); // Now we pull both RS and R/W low to begin commands digitalWrite(_rs_pin, LOW); digitalWrite(_enable_pin, LOW); - if (_rw_pin != 255) { + if (_rw_pin != 255) { digitalWrite(_rw_pin, LOW); } - + //put the LCD into 4 bit or 8 bit mode if (! (_displayfunction & LCD_8BITMODE)) { // this is according to the hitachi HD44780 datasheet @@ -124,13 +124,13 @@ void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) { // second try write4bits(0x03); delayMicroseconds(4500); // wait min 4.1ms - + // third go! - write4bits(0x03); + write4bits(0x03); delayMicroseconds(150); // finally, set to 4-bit interface - write4bits(0x02); + write4bits(0x02); } else { // this is according to the hitachi HD44780 datasheet // page 45 figure 23 @@ -148,10 +148,10 @@ void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) { } // finally, set # lines, font size, etc. - command(LCD_FUNCTIONSET | _displayfunction); + command(LCD_FUNCTIONSET | _displayfunction); // turn the display on with no cursor or blinking default - _displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF; + _displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF; display(); // clear it off @@ -194,7 +194,7 @@ void LiquidCrystal::setCursor(uint8_t col, uint8_t row) if ( row >= _numlines ) { row = _numlines - 1; // we count rows starting w/0 } - + command(LCD_SETDDRAMADDR | (col + _row_offsets[row])); } @@ -288,12 +288,12 @@ void LiquidCrystal::send(uint8_t value, uint8_t mode) { digitalWrite(_rs_pin, mode); // if there is a RW pin indicated, set it low to Write - if (_rw_pin != 255) { + if (_rw_pin != 255) { digitalWrite(_rw_pin, LOW); } - + if (_displayfunction & LCD_8BITMODE) { - write8bits(value); + write8bits(value); } else { write4bits(value>>4); write4bits(value); @@ -302,7 +302,7 @@ void LiquidCrystal::send(uint8_t value, uint8_t mode) { void LiquidCrystal::pulseEnable(void) { digitalWrite(_enable_pin, LOW); - delayMicroseconds(1); + delayMicroseconds(1); digitalWrite(_enable_pin, HIGH); delayMicroseconds(1); // enable pulse must be >450ns digitalWrite(_enable_pin, LOW); @@ -321,6 +321,6 @@ void LiquidCrystal::write8bits(uint8_t value) { for (int i = 0; i < 8; i++) { digitalWrite(_data_pins[i], (value >> i) & 0x01); } - + pulseEnable(); } diff --git a/Marlin/frameworks/CMSIS/LPC1768/lib/Stream.cpp b/Marlin/frameworks/CMSIS/LPC1768/lib/Stream.cpp index b1e507e9e..6a54327d2 100644 --- a/Marlin/frameworks/CMSIS/LPC1768/lib/Stream.cpp +++ b/Marlin/frameworks/CMSIS/LPC1768/lib/Stream.cpp @@ -23,7 +23,7 @@ */ #include -#include "../../../../src/HAL/HAL_LPC1768/arduino.h" +#include #include "Stream.h" diff --git a/Marlin/src/HAL/HAL.h b/Marlin/src/HAL/HAL.h index fd9cbbff2..897096ab1 100644 --- a/Marlin/src/HAL/HAL.h +++ b/Marlin/src/HAL/HAL.h @@ -92,7 +92,7 @@ void spiSendBlock(uint8_t token, const uint8_t* buf); #include "math_32bit.h" #include "HAL_LPC1768/HAL.h" #else - #error Unsupported Platform! + #error "Unsupported Platform!" #endif -#endif /* HAL_H_ */ +#endif // _HAL_H diff --git a/Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp b/Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp index c572b2cca..92e8fdf49 100644 --- a/Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp +++ b/Marlin/src/HAL/HAL_AVR/HAL_AVR.cpp @@ -34,7 +34,7 @@ // -------------------------------------------------------------------------- #include "../HAL.h" -#include "../../../macros.h" +#include "../../core/macros.h" // -------------------------------------------------------------------------- // Externals @@ -75,7 +75,7 @@ // -------------------------------------------------------------------------- #if ENABLED(SDSUPPORT) - #include "../../../SdFatUtil.h" + #include "../../sd/SdFatUtil.h" int freeMemory() { return SdFatUtil::FreeRam(); } #else diff --git a/Marlin/src/HAL/HAL_AVR/HAL_pinsDebug_AVR.h b/Marlin/src/HAL/HAL_AVR/HAL_pinsDebug_AVR.h index 51108196a..92e4f48ea 100644 --- a/Marlin/src/HAL/HAL_AVR/HAL_pinsDebug_AVR.h +++ b/Marlin/src/HAL/HAL_AVR/HAL_pinsDebug_AVR.h @@ -56,7 +56,7 @@ bool endstop_monitor_flag = false; #define REPORT_NAME_DIGITAL(NAME, COUNTER) _ADD_PIN(#NAME, COUNTER) #define REPORT_NAME_ANALOG(NAME, COUNTER) _ADD_PIN(#NAME, COUNTER) -#include "../../../pinsDebug_list.h" +#include "../../pins/pinsDebug_list.h" #line 51 // manually add pins that have names that are macros which don't play well with these macros @@ -107,7 +107,7 @@ const PinInfo pin_array[] PROGMEM = { #endif #endif - #include "../../../pinsDebug_list.h" + #include "../../pins/pinsDebug_list.h" #line 102 }; @@ -483,7 +483,7 @@ inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = f SERIAL_CHAR('.'); SERIAL_ECHO_SP(26 + strlen(start_string)); // add padding if not the first instance found } - name_mem_pointer = (char*)pgm_read_word(&pin_array[x].name); + name_mem_pointer = (char*)pgm_read_ptr(&pin_array[x].name); for (uint8_t y = 0; y < 28; y++) { // always print pin name temp_char = pgm_read_byte(name_mem_pointer + y); if (temp_char != 0) diff --git a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp index 128e73555..b0f0f45a4 100644 --- a/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp +++ b/Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp @@ -37,7 +37,7 @@ // Includes // -------------------------------------------------------------------------- -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" // -------------------------------------------------------------------------- // Public Variables diff --git a/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp b/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp index b4f03f5f0..6c82379e1 100644 --- a/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp +++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp @@ -31,7 +31,7 @@ #ifdef ARDUINO_ARCH_AVR #include "MarlinSerial.h" -#include "../../../Marlin.h" +#include "../../Marlin.h" // Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.) @@ -47,8 +47,7 @@ #if ENABLED(EMERGENCY_PARSER) - #include "../../../stepper.h" - #include "../../../language.h" + #include "../../module/stepper.h" // Currently looking for: M108, M112, M410 // If you alter the parser please don't forget to update the capabilities in Conditionals_post.h diff --git a/Marlin/src/HAL/HAL_AVR/MarlinSerial.h b/Marlin/src/HAL/HAL_AVR/MarlinSerial.h index cf96330f5..0448e5502 100644 --- a/Marlin/src/HAL/HAL_AVR/MarlinSerial.h +++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.h @@ -32,7 +32,7 @@ #ifndef MARLINSERIAL_H #define MARLINSERIAL_H -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" #include diff --git a/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h b/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h index 10aa65296..d78ee9751 100644 --- a/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h +++ b/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h @@ -38,7 +38,8 @@ #ifndef _ENDSTOP_INTERRUPTS_H_ #define _ENDSTOP_INTERRUPTS_H_ -#include "../../../macros.h" +#include "../../core/macros.h" +#include /** * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h) diff --git a/Marlin/src/HAL/HAL_AVR/fastio_AVR.h b/Marlin/src/HAL/HAL_AVR/fastio_AVR.h index 035e3a5d1..5e3292d82 100644 --- a/Marlin/src/HAL/HAL_AVR/fastio_AVR.h +++ b/Marlin/src/HAL/HAL_AVR/fastio_AVR.h @@ -30,7 +30,7 @@ #define _FASTIO_ARDUINO_H #include -#include "../../../macros.h" +#include "../../core/macros.h" #define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)) #define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)) @@ -168,6 +168,7 @@ typedef enum { } ClockSource2; // Get interrupt bits in an orderly way +// Ex: cs = GET_CS(0); coma1 = GET_COM(A,1); #define GET_WGM(T) (((TCCR##T##A >> WGM##T##0) & 0x3) | ((TCCR##T##B >> WGM##T##2 << 2) & 0xC)) #define GET_CS(T) ((TCCR##T##B >> CS##T##0) & 0x7) #define GET_COM(T,Q) ((TCCR##T##Q >> COM##T##Q##0) & 0x3) @@ -182,6 +183,7 @@ typedef enum { #define GET_FOCC(T) GET_FOC(T,C) // Set Wave Generation Mode bits +// Ex: SET_WGM(5,CTC_ICRn); #define _SET_WGM(T,V) do{ \ TCCR##T##A = (TCCR##T##A & ~(0x3 << WGM##T##0)) | (( int(V) & 0x3) << WGM##T##0); \ TCCR##T##B = (TCCR##T##B & ~(0x3 << WGM##T##2)) | (((int(V) >> 2) & 0x3) << WGM##T##2); \ @@ -189,6 +191,7 @@ typedef enum { #define SET_WGM(T,V) _SET_WGM(T,WGM_##V) // Set Clock Select bits +// Ex: SET_CS3(PRESCALER_64); #define _SET_CS(T,V) (TCCR##T##B = (TCCR##T##B & ~(0x7 << CS##T##0)) | ((int(V) & 0x7) << CS##T##0)) #define _SET_CS0(V) _SET_CS(0,V) #define _SET_CS1(V) _SET_CS(1,V) @@ -213,6 +216,7 @@ typedef enum { #define SET_CS(T,V) SET_CS##T(V) // Set Compare Mode bits +// Ex: SET_COMS(4,CLEAR_SET,CLEAR_SET,CLEAR_SET); #define _SET_COM(T,Q,V) (TCCR##T##Q = (TCCR##T##Q & ~(0x3 << COM##T##Q##0)) | (int(V) << COM##T##Q##0)) #define SET_COM(T,Q,V) _SET_COM(T,Q,COM_##V) #define SET_COMA(T,V) SET_COM(T,A,V) @@ -221,12 +225,15 @@ typedef enum { #define SET_COMS(T,V1,V2,V3) do{ SET_COMA(T,V1); SET_COMB(T,V2); SET_COMC(T,V3); }while(0) // Set Noise Canceler bit +// Ex: SET_ICNC(2,1) #define SET_ICNC(T,V) (TCCR##T##B = (V) ? TCCR##T##B | _BV(ICNC##T) : TCCR##T##B & ~_BV(ICNC##T)) // Set Input Capture Edge Select bit +// Ex: SET_ICES(5,0) #define SET_ICES(T,V) (TCCR##T##B = (V) ? TCCR##T##B | _BV(ICES##T) : TCCR##T##B & ~_BV(ICES##T)) // Set Force Output Compare bit +// Ex: SET_FOC(3,A,1) #define SET_FOC(T,Q,V) (TCCR##T##C = (V) ? TCCR##T##C | _BV(FOC##T##Q) : TCCR##T##C & ~_BV(FOC##T##Q)) #define SET_FOCA(T,V) SET_FOC(T,A,V) #define SET_FOCB(T,V) SET_FOC(T,B,V) diff --git a/Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp index a4017a144..ff26673fb 100644 --- a/Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp +++ b/Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp @@ -2,10 +2,7 @@ #include "../persistent_store_api.h" -#include "../../../types.h" -#include "../../../language.h" -#include "../../../serial.h" -#include "../../../utility.h" +#include "../../inc/MarlinConfig.h" #if ENABLED(EEPROM_SETTINGS) diff --git a/Marlin/src/HAL/HAL_AVR/pinsDebug_AVR_8_bit.h b/Marlin/src/HAL/HAL_AVR/pinsDebug_AVR_8_bit.h index a65b28f51..9343b3b28 100644 --- a/Marlin/src/HAL/HAL_AVR/pinsDebug_AVR_8_bit.h +++ b/Marlin/src/HAL/HAL_AVR/pinsDebug_AVR_8_bit.h @@ -54,13 +54,13 @@ #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin) #endif -#define VALID_PIN(pin)) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0) +#define VALID_PIN(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0) #define DIGITAL_PIN_TO_ANALOG_PIN(p) int(p - analogInputToDigitalPin(0)) #define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && ((P) <= analogInputToDigitalPin(15) || (P) <= analogInputToDigitalPin(7))) #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin) void PRINT_ARRAY_NAME(uint8_t x) { - char *name_mem_pointer = (char*)pgm_read_word(&pin_array[x].name); + char *name_mem_pointer = (char*)pgm_read_ptr(&pin_array[x].name); for (uint8_t y = 0; y < MAX_NAME_LENGTH; y++) { char temp_char = pgm_read_byte(name_mem_pointer + y); if (temp_char != 0) @@ -362,7 +362,8 @@ static void pwm_details(uint8_t pin) { } #endif -#ifndef PRINT_PORT(p) +#ifndef PRINT_PORT + void print_port(int8_t pin) { // print port number #ifdef digitalPinToPort_DEBUG uint8_t x; @@ -394,4 +395,7 @@ static void pwm_details(uint8_t pin) { } #define PRINT_PORT(p) print_port(p) + #endif + +#define GET_PIN_INFO(pin) do{}while(0) diff --git a/Marlin/src/HAL/HAL_AVR/servo_AVR.cpp b/Marlin/src/HAL/HAL_AVR/servo_AVR.cpp index a57b823ba..f6d808fde 100644 --- a/Marlin/src/HAL/HAL_AVR/servo_AVR.cpp +++ b/Marlin/src/HAL/HAL_AVR/servo_AVR.cpp @@ -53,7 +53,7 @@ #ifdef ARDUINO_ARCH_AVR -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" #if HAS_SERVOS diff --git a/Marlin/src/HAL/HAL_AVR/watchdog_AVR.cpp b/Marlin/src/HAL/HAL_AVR/watchdog_AVR.cpp index eb412ed25..0de550eb9 100644 --- a/Marlin/src/HAL/HAL_AVR/watchdog_AVR.cpp +++ b/Marlin/src/HAL/HAL_AVR/watchdog_AVR.cpp @@ -22,13 +22,13 @@ #ifdef ARDUINO_ARCH_AVR -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" #if ENABLED(USE_WATCHDOG) #include "watchdog_AVR.h" -#include "../../../Marlin.h" +#include "../../Marlin.h" // Initialize watchdog with a 4 sec interrupt time void watchdog_init() { diff --git a/Marlin/src/HAL/HAL_DUE/HAL_Due.h b/Marlin/src/HAL/HAL_DUE/HAL_Due.h index 6280cbab9..2b8cca809 100644 --- a/Marlin/src/HAL/HAL_DUE/HAL_Due.h +++ b/Marlin/src/HAL/HAL_DUE/HAL_Due.h @@ -74,9 +74,15 @@ #define strncpy_P(dest, src, num) strncpy((dest), (src), (num)) #endif +#ifndef vsnprintf_P + #define vsnprintf_P vsnprintf +#endif + // Fix bug in pgm_read_ptr #undef pgm_read_ptr -#define pgm_read_ptr(addr) (*(addr)) +#define pgm_read_ptr(addr) (*((void**)(addr))) +#undef pgm_read_word +#define pgm_read_word(addr) (*((uint16_t*)(addr))) #define RST_POWER_ON 1 #define RST_EXTERNAL 2 diff --git a/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp b/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp index 2a7aa8070..ee2fa1b11 100644 --- a/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp +++ b/Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp @@ -37,7 +37,7 @@ // Includes // -------------------------------------------------------------------------- -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" // -------------------------------------------------------------------------- // Public Variables diff --git a/Marlin/src/HAL/HAL_DUE/Servo_Due.cpp b/Marlin/src/HAL/HAL_DUE/Servo_Due.cpp index 66667cee3..166111baa 100644 --- a/Marlin/src/HAL/HAL_DUE/Servo_Due.cpp +++ b/Marlin/src/HAL/HAL_DUE/Servo_Due.cpp @@ -40,7 +40,7 @@ #ifdef ARDUINO_ARCH_SAM -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" #if HAS_SERVOS diff --git a/Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp index 3ada74020..2a1caffb6 100644 --- a/Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp +++ b/Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp @@ -2,10 +2,7 @@ #include "../persistent_store_api.h" -#include "../../../types.h" -#include "../../../language.h" -#include "../../../serial.h" -#include "../../../utility.h" +#include "../../inc/MarlinConfig.h" #if ENABLED(EEPROM_SETTINGS) diff --git a/Marlin/src/HAL/HAL_DUE/watchdog_Due.cpp b/Marlin/src/HAL/HAL_DUE/watchdog_Due.cpp index 00a992d75..55c5ac8cf 100644 --- a/Marlin/src/HAL/HAL_DUE/watchdog_Due.cpp +++ b/Marlin/src/HAL/HAL_DUE/watchdog_Due.cpp @@ -22,7 +22,7 @@ #ifdef ARDUINO_ARCH_SAM -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" #if ENABLED(USE_WATCHDOG) diff --git a/Marlin/src/HAL/HAL_DUE/watchdog_Due.h b/Marlin/src/HAL/HAL_DUE/watchdog_Due.h index 1b4c68b01..be8afd2e8 100644 --- a/Marlin/src/HAL/HAL_DUE/watchdog_Due.h +++ b/Marlin/src/HAL/HAL_DUE/watchdog_Due.h @@ -23,10 +23,10 @@ #ifndef WATCHDOG_DUE_H #define WATCHDOG_DUE_H -//#include "../../../Marlin.h" - // Arduino Due core now has watchdog support +#include "../HAL.h" + // Initialize watchdog with a 4 second interrupt time void watchdog_init(); @@ -34,4 +34,4 @@ void watchdog_init(); // first watchdog_init or AVR will go into emergency procedures. inline void watchdog_reset() { watchdogReset(); } -#endif /* WATCHDOG_DUE_H */ +#endif // WATCHDOG_DUE_H diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL.cpp b/Marlin/src/HAL/HAL_LPC1768/HAL.cpp index ca3fb7e66..181180fe4 100644 --- a/Marlin/src/HAL/HAL_LPC1768/HAL.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/HAL.cpp @@ -18,16 +18,13 @@ along with this program. If not, see . ****************************************************************************/ - -/** - * - * For TARGET_LPC1768 - */ - #ifdef TARGET_LPC1768 -#include "../../../macros.h" + +#include "../../core/macros.h" #include "../HAL.h" +#include + extern "C" { //#include //#include @@ -51,7 +48,7 @@ extern "C" void u8g_Delay(uint16_t val) { //************************// // return free heap space -int freeMemory(){ +int freeMemory() { char stack_end; void *heap_start = malloc(sizeof(uint32_t)); if (heap_start == 0) return 0; @@ -82,22 +79,22 @@ void HAL_adc_init(void) { } // externals need to make the call to KILL compile -#include "../../../language.h" +#include "../../core/language.h" extern void kill(const char*); extern const char errormagic[]; void HAL_adc_enable_channel(int pin) { - if (pin < 0 || pin >= NUM_ANALOG_INPUTS) { + if (!WITHIN(pin, 0, NUM_ANALOG_INPUTS - 1)) { usb_serial.printf("%sINVALID ANALOG PORT:%d\n", errormagic, pin); kill(MSG_KILLED); } - int8_t pin_port = adc_pin_map[pin].port; - int8_t pin_port_pin = adc_pin_map[pin].pin; - int8_t pinsel_start_bit = pin_port_pin > 15 ? 2 * (pin_port_pin - 16) : 2 * pin_port_pin; + int8_t pin_port = adc_pin_map[pin].port, + pin_port_pin = adc_pin_map[pin].pin, + pinsel_start_bit = pin_port_pin > 15 ? 2 * (pin_port_pin - 16) : 2 * pin_port_pin; uint8_t pin_sel_register = (pin_port == 0 && pin_port_pin <= 15) ? 0 : - (pin_port == 0) ? 1 : + pin_port == 0 ? 1 : pin_port == 1 ? 3 : 10; switch (pin_sel_register) { @@ -117,24 +114,21 @@ void HAL_adc_enable_channel(int pin) { } void HAL_adc_start_conversion(uint8_t adc_pin) { - if( (adc_pin >= NUM_ANALOG_INPUTS) || (adc_pin_map[adc_pin].port == 0xFF) ) { - usb_serial.printf("HAL: HAL_adc_start_conversion: no pinmap for %d\n",adc_pin); + if (adc_pin >= (NUM_ANALOG_INPUTS) || adc_pin_map[adc_pin].port == 0xFF) { + usb_serial.printf("HAL: HAL_adc_start_conversion: no pinmap for %d\n", adc_pin); return; } - LPC_ADC->ADCR &= ~0xFF; // Reset - LPC_ADC->ADCR |= ( 0x01 << adc_pin_map[adc_pin].adc ); // Select Channel - LPC_ADC->ADCR |= ( 0x01 << 24 ); // start conversion + LPC_ADC->ADCR &= ~0xFF; // Reset + SBI(LPC_ADC->ADCR, adc_pin_map[adc_pin].adc); // Select Channel + SBI(LPC_ADC->ADCR, 24); // Start conversion } -bool HAL_adc_finished(void) { - return LPC_ADC->ADGDR & ADC_DONE; -} +bool HAL_adc_finished(void) { return LPC_ADC->ADGDR & ADC_DONE; } uint16_t HAL_adc_get_result(void) { uint32_t data = LPC_ADC->ADGDR; - LPC_ADC->ADCR &= ~(1 << 24); //stop conversion - if ( data & ADC_OVERRUN ) return 0; - return ((data >> 6) & 0x3ff); //10bit + CBI(LPC_ADC->ADCR, 24); // Stop conversion + return (data & ADC_OVERRUN) ? 0 : (data >> 6) & 0x3FF; // 10bit } #define SBIT_CNTEN 0 diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp b/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp index 55e5d6593..be3ffc605 100644 --- a/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/HAL_spi.cpp @@ -36,7 +36,7 @@ // Includes // -------------------------------------------------------------------------- -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" // -------------------------------------------------------------------------- // Public Variables diff --git a/Marlin/src/HAL/HAL_LPC1768/HardwareSerial.cpp b/Marlin/src/HAL/HAL_LPC1768/HardwareSerial.cpp index 9d5c392f0..69676eab9 100644 --- a/Marlin/src/HAL/HAL_LPC1768/HardwareSerial.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/HardwareSerial.cpp @@ -22,7 +22,7 @@ #ifdef TARGET_LPC1768 -#include "../../../macros.h" +#include "../../core/macros.h" #include "../HAL.h" #include "HardwareSerial.h" #define UART3 3 diff --git a/Marlin/src/HAL/HAL_LPC1768/LPC1768_Servo.cpp b/Marlin/src/HAL/HAL_LPC1768/LPC1768_Servo.cpp index f2a311e5a..3147b22c8 100644 --- a/Marlin/src/HAL/HAL_LPC1768/LPC1768_Servo.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/LPC1768_Servo.cpp @@ -60,7 +60,7 @@ * unless DEACTIVATE_SERVOS_AFTER_MOVE is enabled and a MOVE command was issued. */ -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" #if HAS_SERVOS && defined(TARGET_LPC1768) diff --git a/Marlin/src/HAL/HAL_LPC1768/LPC1768_Servo.h b/Marlin/src/HAL/HAL_LPC1768/LPC1768_Servo.h index 7cbd97826..291ca130a 100644 --- a/Marlin/src/HAL/HAL_LPC1768/LPC1768_Servo.h +++ b/Marlin/src/HAL/HAL_LPC1768/LPC1768_Servo.h @@ -34,29 +34,29 @@ #ifndef LPC1768_SERVO_H #define LPC1768_SERVO_H -#include +#include -class Servo { - public: - Servo(); - int8_t attach(int pin); // attach the given pin to the next free channel, set pinMode, return channel number (-1 on fail) - int8_t attach(int pin, int min, int max); // as above but also sets min and max values for writes. - void detach(); - void write(int value); // if value is < 200 it is treated as an angle, otherwise as pulse width in microseconds - void writeMicroseconds(int value); // write pulse width in microseconds - void move(int value); // attach the servo, then move to value - // if value is < 200 it is treated as an angle, otherwise as pulse width in microseconds - // if DEACTIVATE_SERVOS_AFTER_MOVE wait SERVO_DELAY, then detach - int read(); // returns current pulse width as an angle between 0 and 180 degrees - int readMicroseconds(); // returns current pulse width in microseconds for this servo (was read_us() in first release) - bool attached(); // return true if this servo is attached, otherwise false + class Servo { + public: + Servo(); + int8_t attach(int pin); // attach the given pin to the next free channel, set pinMode, return channel number (-1 on fail) + int8_t attach(int pin, int min, int max); // as above but also sets min and max values for writes. + void detach(); + void write(int value); // if value is < 200 it is treated as an angle, otherwise as pulse width in microseconds + void writeMicroseconds(int value); // write pulse width in microseconds + void move(int value); // attach the servo, then move to value + // if value is < 200 it is treated as an angle, otherwise as pulse width in microseconds + // if DEACTIVATE_SERVOS_AFTER_MOVE wait SERVO_DELAY, then detach + int read(); // returns current pulse width as an angle between 0 and 180 degrees + int readMicroseconds(); // returns current pulse width in microseconds for this servo (was read_us() in first release) + bool attached(); // return true if this servo is attached, otherwise false - private: - uint8_t servoIndex; // index into the channel data for this servo - int min; - int max; -}; + private: + uint8_t servoIndex; // index into the channel data for this servo + int min; + int max; + }; -#define HAL_SERVO_LIB Servo + #define HAL_SERVO_LIB Servo #endif // LPC1768_SERVO_H diff --git a/Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.cpp b/Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.cpp index f89d704f5..1196c0bf4 100644 --- a/Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.cpp @@ -35,7 +35,7 @@ http://arduiniana.org. // Includes // //#include -#include "../../../macros.h" +#include "../../core/macros.h" #include "../HAL.h" #include #include diff --git a/Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.h b/Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.h index e78c59744..544c7c450 100644 --- a/Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.h +++ b/Marlin/src/HAL/HAL_LPC1768/SoftwareSerial.h @@ -29,13 +29,13 @@ The latest version of this library can always be found at http://arduiniana.org. */ -#ifndef SoftwareSerial_h -#define SoftwareSerial_h +#ifndef SOFTWARESERIAL_H +#define SOFTWARESERIAL_H #include "arduino.h" -#include +#include //#include "serial.h" - #include +#include #include /****************************************************************************** @@ -116,4 +116,4 @@ public: #undef abs #undef round -#endif +#endif // SOFTWARESERIAL_H diff --git a/Marlin/src/HAL/HAL_LPC1768/WInterrupts.cpp b/Marlin/src/HAL/HAL_LPC1768/WInterrupts.cpp index 7bf93c1a7..8c2ca1d5e 100644 --- a/Marlin/src/HAL/HAL_LPC1768/WInterrupts.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/WInterrupts.cpp @@ -18,7 +18,7 @@ #ifdef TARGET_LPC1768 -#include "../../../macros.h" +#include "../../core/macros.h" #include "../HAL.h" #include "arduino.h" #include "pinmapping.h" @@ -32,197 +32,159 @@ typedef void (*interruptCB)(void); static interruptCB callbacksP0[GNUM]; static interruptCB callbacksP2[GNUM]; - extern "C" void GpioEnableInt(uint32_t port, uint32_t pin, uint32_t mode); - extern "C" void GpioDisableInt(uint32_t port, uint32_t pin); +extern "C" void GpioEnableInt(const uint32_t port, const uint32_t pin, const uint32_t mode); +extern "C" void GpioDisableInt(const uint32_t port, const uint32_t pin); //void deadloop(void) {} /* Configure PIO interrupt sources */ static void __initialize() { - int i; - for (i=0; iIO0IntClr = (1 << pin); - if (mode ==RISING) { - LPC_GPIOINT->IO0IntEnR |= (1<IO0IntEnF &= ~(1<IO0IntEnF |= (1<IO0IntEnR &= ~(1<IO0IntEnR |= (1<IO0IntEnF |= (1<IO2IntClr = (1 << pin); - if (mode ==RISING) { - LPC_GPIOINT->IO2IntEnR |= (1<IO2IntEnF &= ~(1<IO2IntEnF |= (1<IO2IntEnR &= ~(1<IO2IntEnR |= (1<IO2IntEnF |= (1<IO0IntEnR &= ~(1<IO0IntEnF &= ~(1<IO0IntClr = 1 << pin; - } - else { - LPC_GPIOINT->IO2IntEnR &= ~(1<IO2IntEnF &= ~(1<IO2IntClr = 1 << pin; - } + // Enable interrupt + GpioEnableInt(myport,mypin,mode); } -bool isPowerOf2(unsigned int n) +void detachInterrupt(const uint32_t pin) { + if (!INTERRUPT_PIN(pin)) return; -{ + const uint8_t myport = pin_map[pin].port, + mypin = pin_map[pin].pin; - return n == 1 || (n & (n-1)) == 0; + // Disable interrupt + GpioDisableInt(myport, mypin); + // unset callback + if (myport == 0) + callbacksP0[mypin] = 0; + else //if (myport == 2 ) + callbacksP2[mypin] = 0; } -#if 0 -extern "C" void EINT3_IRQHandler () { - LPC_GPIOINT->IO0IntClr = LPC_GPIOINT->IO2IntClr = 0xFFFFFFFF; - TOGGLE(13); - //NVIC_ClearPendingIRQ(EINT3_IRQn); -} -#else -extern "C" void EINT3_IRQHandler(void) -{ - // Read in all current interrupt registers. We do this once as the -// GPIO interrupt registers are on the APB bus, and this is slow. -uint32_t rise0 = LPC_GPIOINT->IO0IntStatR; -uint32_t fall0 = LPC_GPIOINT->IO0IntStatF; -uint32_t rise2 = LPC_GPIOINT->IO2IntStatR; -uint32_t fall2 = LPC_GPIOINT->IO2IntStatF; -//Clear teh interrupts ASAP -LPC_GPIOINT->IO0IntClr = LPC_GPIOINT->IO2IntClr = 0xFFFFFFFF; -NVIC_ClearPendingIRQ(EINT3_IRQn); -uint8_t bitloc; -if (rise0 == 0) - goto fall0; - /* multiple pins changes happened.*/ - while(rise0 > 0) { //Continue as long as there are interrupts pending - bitloc = 31 - __CLZ(rise0); //CLZ returns number of leading zeros, 31 minus that is location of first pending interrupt - if (callbacksP0[bitloc]!=0) - callbacksP0[bitloc](); - rise0 -= 1<IO0IntClr = fall0;*/ -else { -while(fall0 > 0) { - bitloc = 31 - __CLZ(fall0); - if (callbacksP0[bitloc]!=0) - callbacksP0[bitloc](); - fall0 -= 1<IO0IntClr = _BV(pin); + if (mode == RISING) { + SBI(LPC_GPIOINT->IO0IntEnR, pin); + CBI(LPC_GPIOINT->IO0IntEnF, pin); + } + else if (mode == FALLING) { + SBI(LPC_GPIOINT->IO0IntEnF, pin); + CBI(LPC_GPIOINT->IO0IntEnR, pin); + } + else if (mode == CHANGE) { + SBI(LPC_GPIOINT->IO0IntEnR, pin); + SBI(LPC_GPIOINT->IO0IntEnF, pin); + } } -} -rise2: -if (rise2==0) - goto fall2; -/*if ((rise2 & (rise2 - 1)) == 0) { - callbacksP2[rise2](); - //LPC_GPIOINT->IO2IntClr = rise2; -}*/ -else { -while(rise2 > 0) { - bitloc = 31 - __CLZ(rise2); - if (callbacksP2[bitloc]!=0) - callbacksP2[bitloc](); - //LPC_GPIOINT->IO2IntClr = 1 << bitloc; - rise2 -= 1<IO2IntClr = _BV(pin); + if (mode == RISING) { + SBI(LPC_GPIOINT->IO2IntEnR, pin); + CBI(LPC_GPIOINT->IO2IntEnF, pin); + } + else if (mode == FALLING) { + SBI(LPC_GPIOINT->IO2IntEnF, pin); + CBI(LPC_GPIOINT->IO2IntEnR, pin); + } + else if (mode == CHANGE) { + SBI(LPC_GPIOINT->IO2IntEnR, pin); + SBI(LPC_GPIOINT->IO2IntEnF, pin); + } } } -fall2: -if (fall2==0) - goto end; -/*if ((fall2 & (fall2 - 1)) == 0) { - callbacksP2[fall2](); - //LPC_GPIOINT->IO2IntClr = fall2; -}*/ -else { -while(fall2 > 0) { - bitloc = 31 - __CLZ(fall2); - if (callbacksP2[bitloc]!=0) - callbacksP2[bitloc](); - //LPC_GPIOINT->IO2IntClr = 1 << bitloc; - fall2 -= 1<IO0IntClr = LPC_GPIOINT->IO2IntClr = 0xFFFFFFFF; -//NVIC_ClearPendingIRQ(EINT3_IRQn); -return; //silences warning + +extern "C" void GpioDisableInt(const uint32_t port, const uint32_t pin) { + if (port == 0) { + CBI(LPC_GPIOINT->IO0IntEnR, pin); + CBI(LPC_GPIOINT->IO0IntEnF, pin); + LPC_GPIOINT->IO0IntClr = _BV(pin); + } + else { + CBI(LPC_GPIOINT->IO2IntEnR, pin); + CBI(LPC_GPIOINT->IO2IntEnF, pin); + LPC_GPIOINT->IO2IntClr = _BV(pin); + } } + +bool isPowerOf2(unsigned int n) { + return n == 1 || (n & (n - 1)) == 0; } + +#if 0 + extern "C" void EINT3_IRQHandler () { + LPC_GPIOINT->IO0IntClr = LPC_GPIOINT->IO2IntClr = 0xFFFFFFFF; + TOGGLE(13); + //NVIC_ClearPendingIRQ(EINT3_IRQn); + } +#else + + extern "C" void EINT3_IRQHandler(void) { + // Read in all current interrupt registers. We do this once as the + // GPIO interrupt registers are on the APB bus, and this is slow. + uint32_t rise0 = LPC_GPIOINT->IO0IntStatR, + fall0 = LPC_GPIOINT->IO0IntStatF, + rise2 = LPC_GPIOINT->IO2IntStatR, + fall2 = LPC_GPIOINT->IO2IntStatF; + // Clear the interrupts ASAP + LPC_GPIOINT->IO0IntClr = LPC_GPIOINT->IO2IntClr = 0xFFFFFFFF; + NVIC_ClearPendingIRQ(EINT3_IRQn); + + /* multiple pins changes happened.*/ + if (rise0) while (rise0 > 0) { // Continue as long as there are interrupts pending + const uint8_t bitloc = 31 - __CLZ(rise0); //CLZ returns number of leading zeros, 31 minus that is location of first pending interrupt + if (callbacksP0[bitloc] != NULL) callbacksP0[bitloc](); + rise0 -= _BV(bitloc); + } + + if (fall0) while (fall0 > 0) { + const uint8_t bitloc = 31 - __CLZ(fall0); + if (callbacksP0[bitloc] != NULL) callbacksP0[bitloc](); + fall0 -= _BV(bitloc); + } + + if (rise2) while(rise2 > 0) { + const uint8_t bitloc = 31 - __CLZ(rise2); + if (callbacksP2[bitloc] != NULL) callbacksP2[bitloc](); + //LPC_GPIOINT->IO2IntClr = 1 << bitloc; + rise2 -= _BV(bitloc); + } + + if (fall2) while (fall2 > 0) { + const uint8_t bitloc = 31 - __CLZ(fall2); + if (callbacksP2[bitloc] != NULL) callbacksP2[bitloc](); + //LPC_GPIOINT->IO2IntClr = 1 << bitloc; + fall2 -= _BV(bitloc); + } + //NVIC_ClearPendingIRQ(EINT3_IRQn); + //LPC_GPIOINT->IO0IntClr = LPC_GPIOINT->IO2IntClr = 0xFFFFFFFF; + //NVIC_ClearPendingIRQ(EINT3_IRQn); + } + #endif #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/HAL_LPC1768/arduino.cpp b/Marlin/src/HAL/HAL_LPC1768/arduino.cpp index 7fec1ac13..4ea428808 100644 --- a/Marlin/src/HAL/HAL_LPC1768/arduino.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/arduino.cpp @@ -21,19 +21,15 @@ */ #ifdef TARGET_LPC1768 + #include #include "HAL.h" -#include "../../macros.h" +#include "../../core/macros.h" // Interrupts void cli(void) { __disable_irq(); } // Disable void sei(void) { __enable_irq(); } // Enable -// Program Memory -void serialprintPGM(const char * str){ - usb_serial.print(str); -} - // Time functions void _delay_ms(int delay_ms) { delay (delay_ms); diff --git a/Marlin/src/HAL/HAL_LPC1768/arduino.h b/Marlin/src/HAL/HAL_LPC1768/arduino.h index f34e8217a..9fa9c54b3 100644 --- a/Marlin/src/HAL/HAL_LPC1768/arduino.h +++ b/Marlin/src/HAL/HAL_LPC1768/arduino.h @@ -38,7 +38,7 @@ #define _BV(bit) (1 << (bit)) -#define E2END 4096 //EEPROM end address +#define E2END 0xFFF // EEPROM end address typedef uint8_t byte; #define PROGMEM @@ -49,10 +49,10 @@ typedef uint8_t byte; #define max(a,b) ((a)>(b)?(a):(b)) #define abs(x) ((x)>0?(x):-(x)) #ifndef isnan -#define isnan std::isnan + #define isnan std::isnan #endif #ifndef isinf -#define isinf std::isinf + #define isinf std::isinf #endif //not constexpr until c++14 @@ -73,15 +73,15 @@ extern "C" void GpioEnableInt(uint32_t port, uint32_t pin, uint32_t mode); extern "C" void GpioDisableInt(uint32_t port, uint32_t pin); // Program Memory -#define pgm_read_ptr(address_short) (*(address_short)) -#define pgm_read_byte_near(address_short) (*address_short) -#define pgm_read_byte(address_short) pgm_read_byte_near(address_short) -#define pgm_read_float_near(address_short) (*address_short) -#define pgm_read_float(address_short) pgm_read_float_near(address_short) -#define pgm_read_word_near(address_short) (*address_short) -#define pgm_read_word(address_short) pgm_read_word_near(address_short) -#define pgm_read_dword_near(address_short) (*address_short) -#define pgm_read_dword(address_short) pgm_read_dword_near(address_short) +#define pgm_read_ptr(addr) (*((void**)(addr))) +#define pgm_read_byte_near(addr) (*((uint8_t*)(addr))) +#define pgm_read_float_near(addr) (*((float*)(addr))) +#define pgm_read_word_near(addr) (*((uint16_t*)(addr))) +#define pgm_read_dword_near(addr) (*((uint32_t*)(addr))) +#define pgm_read_byte(addr) pgm_read_byte_near(addr) +#define pgm_read_float(addr) pgm_read_float_near(addr) +#define pgm_read_word(addr) pgm_read_word_near(addr) +#define pgm_read_dword(addr) pgm_read_dword_near(addr) #define sprintf_P sprintf #define strstr_P strstr @@ -90,8 +90,6 @@ extern "C" void GpioDisableInt(uint32_t port, uint32_t pin); #define strcpy_P strcpy #define snprintf_P snprintf -void serialprintPGM(const char *); - // Time functions extern "C" { void delay(int milis); diff --git a/Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py b/Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py index a08e222d2..47e5bf1e2 100644 --- a/Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py +++ b/Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py @@ -1,4 +1,4 @@ -#dynaomic build flags for generic compile options +#dynamic build flags for generic compile options if __name__ == "__main__": print " ".join([ "-std=gnu11", "-std=gnu++11", diff --git a/Marlin/src/HAL/HAL_LPC1768/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_LPC1768/persistent_store_impl.cpp index 9e30547e1..a3acfb857 100644 --- a/Marlin/src/HAL/HAL_LPC1768/persistent_store_impl.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/persistent_store_impl.cpp @@ -1,21 +1,17 @@ #ifdef TARGET_LPC1768 -#include "../persistent_store_api.h" -#include "../../../types.h" -#include "../../../language.h" -#include "../../../serial.h" -#include "../../../utility.h" +#include "../../inc/MarlinConfig.h" -#include "chanfs/diskio.h" -#include "chanfs/ff.h" +#if ENABLED(EEPROM_SETTINGS) +#include "../persistent_store_api.h" -#if ENABLED(EEPROM_SETTINGS) +#include "chanfs/diskio.h" +#include "chanfs/ff.h" namespace HAL { namespace PersistentStore { - FATFS fat_fs; FIL eeprom_file; @@ -25,7 +21,7 @@ bool access_start() { return (res == FR_OK); } -bool access_finish(){ +bool access_finish() { f_close(&eeprom_file); f_unmount(""); return true; @@ -48,8 +44,8 @@ void read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { pos = pos + size; } -} -} +} // PersistentStore +} // HAL #endif // EEPROM_SETTINGS -#endif // ARDUINO_ARCH_AVR +#endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/HAL_LPC1768/pinmapping.h b/Marlin/src/HAL/HAL_LPC1768/pinmapping.h index d3fd53f77..adff789b8 100644 --- a/Marlin/src/HAL/HAL_LPC1768/pinmapping.h +++ b/Marlin/src/HAL/HAL_LPC1768/pinmapping.h @@ -22,12 +22,12 @@ #ifndef __HAL_PINMAPPING_H__ #define __HAL_PINMAPPING_H__ -#include "../../../macros.h" +#include "../../core/macros.h" struct pin_data { uint8_t port, pin; }; struct adc_pin_data { uint8_t port, pin, adc; }; -#if defined(IS_REARM) +#if ENABLED(IS_REARM) #include "pinmap_re_arm.h" #else #error "HAL: LPC1768: No defined pin-mapping" diff --git a/Marlin/src/HAL/HAL_LPC1768/pinsDebug_Re_ARM.h b/Marlin/src/HAL/HAL_LPC1768/pinsDebug_Re_ARM.h index a919d80aa..a93f7c076 100644 --- a/Marlin/src/HAL/HAL_LPC1768/pinsDebug_Re_ARM.h +++ b/Marlin/src/HAL/HAL_LPC1768/pinsDebug_Re_ARM.h @@ -81,4 +81,4 @@ if (pin == 7) return; #define NAME_FORMAT(p) PSTR("%-##p##s") // #define PRINT_ARRAY_NAME(x) do {sprintf_P(buffer, NAME_FORMAT(MAX_NAME_LENGTH) , pin_array[x].name); SERIAL_ECHO(buffer);} while (0) #define PRINT_ARRAY_NAME(x) do {sprintf_P(buffer, PSTR("%-35s") , pin_array[x].name); SERIAL_ECHO(buffer);} while (0) -#define GET_ARRAY_IS_DIGITAL(x) !pin_Re_ARM_analog \ No newline at end of file +#define GET_ARRAY_IS_DIGITAL(x) !pin_Re_ARM_analog diff --git a/Marlin/src/HAL/HAL_LPC1768/servo_private.h b/Marlin/src/HAL/HAL_LPC1768/servo_private.h index e7192b801..eb2a7a69c 100644 --- a/Marlin/src/HAL/HAL_LPC1768/servo_private.h +++ b/Marlin/src/HAL/HAL_LPC1768/servo_private.h @@ -48,11 +48,10 @@ */ -#ifndef servo_private_h -#define servo_private_h - -#include +#ifndef SERVO_PRIVATE_H +#define SERVO_PRIVATE_H +#include // Macros //values in microseconds @@ -83,5 +82,4 @@ typedef struct { extern uint8_t ServoCount; extern ServoInfo_t servo_info[MAX_SERVOS]; - -#endif +#endif // SERVO_PRIVATE_H diff --git a/Marlin/src/HAL/HAL_LPC1768/watchdog.cpp b/Marlin/src/HAL/HAL_LPC1768/watchdog.cpp index 89d10a3cb..21cdb2070 100644 --- a/Marlin/src/HAL/HAL_LPC1768/watchdog.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/watchdog.cpp @@ -22,7 +22,7 @@ #ifdef TARGET_LPC1768 -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" #include "lpc17xx_wdt.h" #include "watchdog.h" diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.cpp b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.cpp index 79495f83c..751aa94fe 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.cpp +++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Servo_Teensy.cpp @@ -2,7 +2,7 @@ #include "HAL_Servo_Teensy.h" -#include "../../../MarlinConfig.h" +#include "../../inc/MarlinConfig.h" int8_t libServo::attach(int pin) { diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Teensy.h b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Teensy.h index 51311fece..fc24b5a92 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Teensy.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_Teensy.h @@ -30,8 +30,6 @@ // Includes // -------------------------------------------------------------------------- -#include - #include "Arduino.h" #include "fastio_Teensy.h" @@ -39,10 +37,13 @@ #include "HAL_timers_Teensy.h" +#include + // -------------------------------------------------------------------------- // Defines // -------------------------------------------------------------------------- +#undef MOTHERBOARD #define MOTHERBOARD BOARD_TEENSY35_36 #define IS_32BIT_TEENSY (defined(__MK64FX512__) || defined(__MK66FX1M0__)) @@ -79,9 +80,10 @@ // Fix bug in pgm_read_ptr #undef pgm_read_ptr -#define pgm_read_ptr(addr) (*(addr)) +#define pgm_read_ptr(addr) (*((void**)(addr))) +// Add type-checking to pgm_read_word #undef pgm_read_word -#define pgm_read_word(addr) (*(addr)) +#define pgm_read_word(addr) (*((uint16_t*)(addr))) #define RST_POWER_ON 1 #define RST_EXTERNAL 2 diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp index 36c9305bb..77a87b4b7 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp +++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_spi_Teensy.cpp @@ -4,7 +4,7 @@ #include #include #include "spi_pins.h" -#include "../../../macros.h" +#include "../../core/macros.h" static SPISettings spiConfig; diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h index 04a09b15e..a9b92d7b9 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h @@ -25,7 +25,6 @@ * Teensy3.6 (__MK66FX1M0__) */ - #ifndef _HAL_TIMERS_TEENSY_H #define _HAL_TIMERS_TEENSY_H diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_impl.cpp index 95a97a921..a50beb869 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_impl.cpp +++ b/Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_impl.cpp @@ -1,14 +1,11 @@ #if defined(__MK64FX512__) || defined(__MK66FX1M0__) -#include "../persistent_store_api.h" - -#include "../../../types.h" -#include "../../../language.h" -#include "../../../serial.h" -#include "../../../utility.h" +#include "../../inc/MarlinConfig.h" #if ENABLED(EEPROM_SETTINGS) +#include "../persistent_store_api.h" + namespace HAL { namespace PersistentStore { @@ -16,7 +13,7 @@ bool access_start() { return true; } -bool access_finish(){ +bool access_finish() { return true; } @@ -51,8 +48,8 @@ void read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { } while (--size); } -} -} +} // PersistentStore +} // HAL #endif // EEPROM_SETTINGS -#endif // ARDUINO_ARCH_AVR +#endif // __MK64FX512__ || __MK66FX1M0__ diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.cpp b/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.cpp index 7a1a9fe99..2d4990dd4 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.cpp +++ b/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.cpp @@ -22,7 +22,7 @@ #if defined(__MK64FX512__) || defined(__MK66FX1M0__) - #include "../../../Marlin.h" + #include "../../Marlin.h" #if ENABLED(USE_WATCHDOG) diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.h b/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.h index c774a4eef..a286f4fc9 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/watchdog_Teensy.h @@ -23,16 +23,16 @@ #ifndef WATCHDOG_TEENSY_H #define WATCHDOG_TEENSY_H -//#include "../../../Marlin.h" +#include "../HAL.h" // Arduino Due core now has watchdog support void watchdog_init(); inline void watchdog_reset() { - // Watchdog refresh sequence - WDOG_REFRESH = 0xA602; - WDOG_REFRESH = 0xB480; + // Watchdog refresh sequence + WDOG_REFRESH = 0xA602; + WDOG_REFRESH = 0xB480; } -#endif /* WATCHDOG_TEENSY_H */ +#endif // WATCHDOG_TEENSY_H diff --git a/Marlin/src/HAL/HAL_spi_pins.h b/Marlin/src/HAL/HAL_spi_pins.h index 4d4c27d07..a041f33a5 100644 --- a/Marlin/src/HAL/HAL_spi_pins.h +++ b/Marlin/src/HAL/HAL_spi_pins.h @@ -23,8 +23,6 @@ #ifndef HAL_SPI_PINS_H_ #define HAL_SPI_PINS_H_ -#include "../../MarlinConfig.h" - #ifdef ARDUINO_ARCH_SAM #include "HAL_DUE/spi_pins.h" diff --git a/Marlin/src/HAL/I2cEeprom.cpp b/Marlin/src/HAL/I2cEeprom.cpp index d5f6e6dd7..15518fc43 100644 --- a/Marlin/src/HAL/I2cEeprom.cpp +++ b/Marlin/src/HAL/I2cEeprom.cpp @@ -25,7 +25,7 @@ * Not platform dependent. */ -#include "../../MarlinConfig.h" +#include "../inc/MarlinConfig.h" #if ENABLED(I2C_EEPROM) diff --git a/Marlin/src/HAL/SpiEeprom.cpp b/Marlin/src/HAL/SpiEeprom.cpp index 86d68fb3e..356bb3d9d 100644 --- a/Marlin/src/HAL/SpiEeprom.cpp +++ b/Marlin/src/HAL/SpiEeprom.cpp @@ -25,7 +25,7 @@ * Not platform dependent. */ -#include "../../MarlinConfig.h" +#include "../inc/MarlinConfig.h" #if ENABLED(SPI_EEPROM) diff --git a/Marlin/src/HAL/math_32bit.h b/Marlin/src/HAL/math_32bit.h index 8586c0000..98b6a55f9 100644 --- a/Marlin/src/HAL/math_32bit.h +++ b/Marlin/src/HAL/math_32bit.h @@ -30,4 +30,4 @@ #define MultiU32X32toH32(intRes, longIn1, longIn2) intRes = ((uint64_t)longIn1 * longIn2 + 0x80000000) >> 32 #define MultiU32X24toH32(intRes, longIn1, longIn2) intRes = ((uint64_t)longIn1 * longIn2 + 0x00800000) >> 24 -#endif +#endif // MATH_32BIT_H diff --git a/Marlin/src/HAL/persistent_store_api.h b/Marlin/src/HAL/persistent_store_api.h index 7d548704d..71bd01bc7 100644 --- a/Marlin/src/HAL/persistent_store_api.h +++ b/Marlin/src/HAL/persistent_store_api.h @@ -12,8 +12,7 @@ bool access_finish(); bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc); void read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) ; -} -} +} // PersistentStore +} // HAL - -#endif /* _PERSISTANT_STORE_H_ */ +#endif // _PERSISTENT_STORE_H_ diff --git a/Marlin/src/HAL/servo.cpp b/Marlin/src/HAL/servo.cpp index 46ab76aa0..1ccd73afa 100644 --- a/Marlin/src/HAL/servo.cpp +++ b/Marlin/src/HAL/servo.cpp @@ -52,7 +52,7 @@ */ -#include "../../MarlinConfig.h" +#include "../inc/MarlinConfig.h" #include "HAL.h" diff --git a/Marlin/src/HAL/servo.h b/Marlin/src/HAL/servo.h index efbe90071..ba2283503 100644 --- a/Marlin/src/HAL/servo.h +++ b/Marlin/src/HAL/servo.h @@ -76,7 +76,7 @@ #include "HAL_LPC1768/LPC1768_Servo.h" #else - #include + #include #if defined(ARDUINO_ARCH_AVR) || defined(ARDUINO_ARCH_SAM) // we're good to go diff --git a/Marlin/src/HAL/servo_private.h b/Marlin/src/HAL/servo_private.h index 3d8c50c0d..9b85b9cf7 100644 --- a/Marlin/src/HAL/servo_private.h +++ b/Marlin/src/HAL/servo_private.h @@ -21,7 +21,7 @@ */ /** - servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 + servo_private.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 Copyright (c) 2009 Michael Margolis. All right reserved. This library is free software; you can redistribute it and/or @@ -39,10 +39,10 @@ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#ifndef servo_private_h -#define servo_private_h +#ifndef SERVO_PRIVATE_H +#define SERVO_PRIVATE_H -#include +#include // Architecture specific include #ifdef ARDUINO_ARCH_AVR @@ -99,5 +99,4 @@ extern ServoInfo_t servo_info[MAX_SERVOS]; extern void initISR(timer16_Sequence_t timer); extern void finISR(timer16_Sequence_t timer); - -#endif +#endif // SERVO_PRIVATE_H