From 4eff18854b7d3bc4e1ca3d23fdc514f505017823 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 26 Jul 2017 22:11:22 -0500 Subject: [PATCH] Rename options with swap_ prefix --- Marlin/Marlin.h | 4 ++-- Marlin/Marlin_main.cpp | 16 ++++++++-------- Marlin/configuration_store.cpp | 24 ++++++++++++------------ Marlin/language_zh_CN.h | 4 ++-- Marlin/language_zh_TW.h | 4 ++-- Marlin/ultralcd.cpp | 4 ++-- 6 files changed, 28 insertions(+), 28 deletions(-) diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 33c813645..1e65d1b4e 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -389,8 +389,8 @@ extern float soft_endstop_min[XYZ], soft_endstop_max[XYZ]; retract_zlift, // M207 Z - G10 Retract hop size retract_recover_length, // M208 S - G11 Recover length retract_recover_feedrate_mm_s, // M208 F - G11 Recover feedrate - retract_length_swap, // M207 W - G10 Swap Retract length - retract_recover_length_swap, // M208 W - G11 Swap Recover length + swap_retract_length, // M207 W - G10 Swap Retract length + swap_retract_recover_length, // M208 W - G11 Swap Recover length swap_retract_recover_feedrate_mm_s; // M208 R - G11 Swap Recover feedrate #endif diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 7aa6a02b9..d637b801b 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -565,8 +565,8 @@ static uint8_t target_extruder; retract_zlift, // M207 Z - G10 Retract hop size retract_recover_length, // M208 S - G11 Recover length retract_recover_feedrate_mm_s, // M208 F - G11 Recover feedrate - retract_length_swap, // M207 W - G10 Swap Retract length - retract_recover_length_swap, // M208 W - G11 Swap Recover length + swap_retract_length, // M207 W - G10 Swap Retract length + swap_retract_recover_length, // M208 W - G11 Swap Recover length swap_retract_recover_feedrate_mm_s; // M208 R - G11 Swap Recover feedrate #if EXTRUDERS > 1 bool retracted_swap[EXTRUDERS] = { false }; // Which extruders are swap-retracted @@ -3165,7 +3165,7 @@ static void homeaxis(const AxisEnum axis) { // Retract by moving from a faux E position back to the current E position feedrate_mm_s = retract_feedrate_mm_s; - current_position[E_AXIS] += (swapping ? retract_length_swap : retract_length) / volumetric_multiplier[active_extruder]; + current_position[E_AXIS] += (swapping ? swap_retract_length : retract_length) / volumetric_multiplier[active_extruder]; sync_plan_position_e(); prepare_move_to_destination(); @@ -3189,7 +3189,7 @@ static void homeaxis(const AxisEnum axis) { // A retract multiplier has been added here to get faster swap recovery feedrate_mm_s = swapping ? swap_retract_recover_feedrate_mm_s : retract_recover_feedrate_mm_s; - const float move_e = swapping ? retract_length_swap + retract_recover_length_swap : retract_length + retract_recover_length; + const float move_e = swapping ? swap_retract_length + swap_retract_recover_length : retract_length + retract_recover_length; current_position[E_AXIS] -= move_e / volumetric_multiplier[active_extruder]; sync_plan_position_e(); @@ -8554,7 +8554,7 @@ inline void gcode_M205() { * M207: Set firmware retraction values * * S[+units] retract_length - * W[+units] retract_length_swap (multi-extruder) + * W[+units] swap_retract_length (multi-extruder) * F[units/min] retract_feedrate_mm_s * Z[units] retract_zlift */ @@ -8562,14 +8562,14 @@ inline void gcode_M205() { if (parser.seen('S')) retract_length = parser.value_axis_units(E_AXIS); if (parser.seen('F')) retract_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS)); if (parser.seen('Z')) retract_zlift = parser.value_linear_units(); - if (parser.seen('W')) retract_length_swap = parser.value_axis_units(E_AXIS); + if (parser.seen('W')) swap_retract_length = parser.value_axis_units(E_AXIS); } /** * M208: Set firmware un-retraction values * * S[+units] retract_recover_length (in addition to M207 S*) - * W[+units] retract_recover_length_swap (multi-extruder) + * W[+units] swap_retract_recover_length (multi-extruder) * F[units/min] retract_recover_feedrate_mm_s * R[units/min] swap_retract_recover_feedrate_mm_s */ @@ -8577,7 +8577,7 @@ inline void gcode_M205() { if (parser.seen('S')) retract_recover_length = parser.value_axis_units(E_AXIS); if (parser.seen('F')) retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS)); if (parser.seen('R')) swap_retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS)); - if (parser.seen('W')) retract_recover_length_swap = parser.value_axis_units(E_AXIS); + if (parser.seen('W')) swap_retract_recover_length = parser.value_axis_units(E_AXIS); } /** diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index 0c27f05bb..aa34f9633 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -132,8 +132,8 @@ * 513 M207 Z retract_zlift (float) * 517 M208 S retract_recover_length (float) * 521 M208 F retract_recover_feedrate_mm_s (float) - * 525 M207 W retract_length_swap (float) - * 529 M208 W retract_recover_length_swap (float) + * 525 M207 W swap_retract_length (float) + * 529 M208 W swap_retract_recover_length (float) * 533 M208 R swap_retract_recover_feedrate_mm_s (float) * * Volumetric Extrusion: 21 bytes @@ -528,8 +528,8 @@ void MarlinSettings::postprocess() { retract_zlift = 0, retract_recover_length = 0, retract_recover_feedrate_mm_s = 0, - retract_length_swap = 13, - retract_recover_length_swap = 0, + swap_retract_length = 13, + swap_retract_recover_length = 0, swap_retract_recover_feedrate_mm_s = 8; #endif EEPROM_WRITE(autoretract_enabled); @@ -538,8 +538,8 @@ void MarlinSettings::postprocess() { EEPROM_WRITE(retract_zlift); EEPROM_WRITE(retract_recover_length); EEPROM_WRITE(retract_recover_feedrate_mm_s); - EEPROM_WRITE(retract_length_swap); - EEPROM_WRITE(retract_recover_length_swap); + EEPROM_WRITE(swap_retract_length); + EEPROM_WRITE(swap_retract_recover_length); EEPROM_WRITE(swap_retract_recover_feedrate_mm_s); EEPROM_WRITE(volumetric_enabled); @@ -920,8 +920,8 @@ void MarlinSettings::postprocess() { EEPROM_READ(retract_zlift); EEPROM_READ(retract_recover_length); EEPROM_READ(retract_recover_feedrate_mm_s); - EEPROM_READ(retract_length_swap); - EEPROM_READ(retract_recover_length_swap); + EEPROM_READ(swap_retract_length); + EEPROM_READ(swap_retract_recover_length); EEPROM_READ(swap_retract_recover_feedrate_mm_s); #else EEPROM_READ(dummyb); @@ -1292,8 +1292,8 @@ void MarlinSettings::reset() { retract_zlift = RETRACT_ZLIFT; retract_recover_length = RETRACT_RECOVER_LENGTH; retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE; - retract_length_swap = RETRACT_LENGTH_SWAP; - retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP; + swap_retract_length = RETRACT_LENGTH_SWAP; + swap_retract_recover_length = RETRACT_RECOVER_LENGTH_SWAP; swap_retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE_SWAP; #endif // FWRETRACT @@ -1747,7 +1747,7 @@ void MarlinSettings::reset() { } CONFIG_ECHO_START; SERIAL_ECHOPAIR(" M207 S", LINEAR_UNIT(retract_length)); - SERIAL_ECHOPAIR(" W", LINEAR_UNIT(retract_length_swap)); + SERIAL_ECHOPAIR(" W", LINEAR_UNIT(swap_retract_length)); SERIAL_ECHOPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(retract_feedrate_mm_s))); SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(retract_zlift)); @@ -1757,7 +1757,7 @@ void MarlinSettings::reset() { } CONFIG_ECHO_START; SERIAL_ECHOPAIR(" M208 S", LINEAR_UNIT(retract_recover_length)); - SERIAL_ECHOPAIR(" W", LINEAR_UNIT(retract_recover_length_swap)); + SERIAL_ECHOPAIR(" W", LINEAR_UNIT(swap_retract_recover_length)); SERIAL_ECHOLNPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(retract_recover_feedrate_mm_s))); if (!forReplay) { diff --git a/Marlin/language_zh_CN.h b/Marlin/language_zh_CN.h index 4ee33b4c7..1332d7655 100644 --- a/Marlin/language_zh_CN.h +++ b/Marlin/language_zh_CN.h @@ -134,11 +134,11 @@ #define MSG_KILLED _UxGT("已杀掉") //"KILLED. " #define MSG_STOPPED _UxGT("已停止") //"STOPPED. " #define MSG_CONTROL_RETRACT _UxGT("回抽长度mm") //"Retract mm" retract_length, retract length (positive mm) -#define MSG_CONTROL_RETRACT_SWAP _UxGT("换手回抽长度mm") //"Swap Re.mm" retract_length_swap, swap retract length (positive mm), for extruder change +#define MSG_CONTROL_RETRACT_SWAP _UxGT("换手回抽长度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change #define MSG_CONTROL_RETRACTF _UxGT("回抽速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) #define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") //"Hop mm" retract_zlift, retract Z-lift #define MSG_CONTROL_RETRACT_RECOVER _UxGT("回抽恢复长度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering) -#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("换手回抽恢复长度mm") //"S UnRet+mm" retract_recover_length_swap, additional swap recover length (mm, added to retract length when recovering from extruder change) +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("换手回抽恢复长度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change) #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回抽恢复后进料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) #define MSG_AUTORETRACT _UxGT("自动抽回") //"AutoRetr." autoretract_enabled, #define MSG_FILAMENTCHANGE _UxGT("更换丝料") //"Change filament" diff --git a/Marlin/language_zh_TW.h b/Marlin/language_zh_TW.h index c7563e786..1ac9aaf09 100644 --- a/Marlin/language_zh_TW.h +++ b/Marlin/language_zh_TW.h @@ -134,11 +134,11 @@ #define MSG_KILLED _UxGT("已殺掉") //"KILLED. " #define MSG_STOPPED _UxGT("已停止") //"STOPPED. " #define MSG_CONTROL_RETRACT _UxGT("回抽長度mm") //"Retract mm" retract_length, retract length (positive mm) -#define MSG_CONTROL_RETRACT_SWAP _UxGT("換手回抽長度mm") //"Swap Re.mm" retract_length_swap, swap retract length (positive mm), for extruder change +#define MSG_CONTROL_RETRACT_SWAP _UxGT("換手回抽長度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change #define MSG_CONTROL_RETRACTF _UxGT("回抽速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) #define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") //"Hop mm" retract_zlift, retract Z-lift #define MSG_CONTROL_RETRACT_RECOVER _UxGT("回抽恢複長度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering) -#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("換手回抽恢複長度mm") //"S UnRet+mm" retract_recover_length_swap, additional swap recover length (mm, added to retract length when recovering from extruder change) +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("換手回抽恢複長度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change) #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回抽恢複後進料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) #define MSG_AUTORETRACT _UxGT("自動抽回") //"AutoRetr." autoretract_enabled, #define MSG_FILAMENTCHANGE _UxGT("更換絲料") //"Change filament" diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 2acfd3d33..15ab6d657 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -3373,13 +3373,13 @@ void kill_screen(const char* lcd_msg) { MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled); MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100); #if EXTRUDERS > 1 - MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_SWAP, &retract_length_swap, 0, 100); + MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_SWAP, &swap_retract_length, 0, 100); #endif MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate_mm_s, 1, 999); MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999); MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, -100, 100); #if EXTRUDERS > 1 - MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER_SWAP, &retract_recover_length_swap, -100, 100); + MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER_SWAP, &swap_retract_recover_length, -100, 100); #endif MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate_mm_s, 1, 999); END_MENU();