From 428c54f2ad6836097e851164021a671c4187e683 Mon Sep 17 00:00:00 2001 From: Karl Andersson Date: Wed, 18 Apr 2018 00:33:29 +0200 Subject: [PATCH] [2.0.x] HAL for STM32F4 (#10434) --- .../HAL_STM32F4/EEPROM_Emul/eeprom_emul.cpp | 571 +++++ .../HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h | 117 ++ Marlin/src/HAL/HAL_STM32F4/EmulatedEeprom.cpp | 143 ++ Marlin/src/HAL/HAL_STM32F4/HAL.cpp | 140 ++ Marlin/src/HAL/HAL_STM32F4/HAL.h | 249 +++ .../src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.cpp | 53 + .../src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.h | 41 + .../src/HAL/HAL_STM32F4/HAL_spi_STM32F4.cpp | 165 ++ .../HAL/HAL_STM32F4/HAL_timers_STM32F4.cpp | 156 ++ .../src/HAL/HAL_STM32F4/HAL_timers_STM32F4.h | 105 + Marlin/src/HAL/HAL_STM32F4/README.md | 12 + Marlin/src/HAL/HAL_STM32F4/SanityCheck.h | 66 + .../src/HAL/HAL_STM32F4/endstop_interrupts.h | 77 + Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h | 54 + .../HAL/HAL_STM32F4/persistent_store_impl.cpp | 75 + Marlin/src/HAL/HAL_STM32F4/pinsDebug.h | 1 + Marlin/src/HAL/HAL_STM32F4/spi_pins.h | 41 + .../src/HAL/HAL_STM32F4/watchdog_STM32F4.cpp | 57 + Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.h | 33 + Marlin/src/HAL/platforms.h | 2 + Marlin/src/HAL/servo.cpp | 2 +- Marlin/src/HAL/servo.h | 3 +- Marlin/src/backtrace/unwmemaccess.cpp | 11 + .../config/examples/STM32F4/Configuration.h | 1868 +++++++++++++++++ Marlin/src/core/boards.h | 1 + Marlin/src/pins/pins.h | 2 + Marlin/src/pins/pins_STM32F4.h | 204 ++ platformio.ini | 10 + 28 files changed, 4257 insertions(+), 2 deletions(-) create mode 100644 Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.cpp create mode 100644 Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h create mode 100644 Marlin/src/HAL/HAL_STM32F4/EmulatedEeprom.cpp create mode 100644 Marlin/src/HAL/HAL_STM32F4/HAL.cpp create mode 100644 Marlin/src/HAL/HAL_STM32F4/HAL.h create mode 100644 Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.cpp create mode 100644 Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.h create mode 100644 Marlin/src/HAL/HAL_STM32F4/HAL_spi_STM32F4.cpp create mode 100644 Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.cpp create mode 100644 Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.h create mode 100644 Marlin/src/HAL/HAL_STM32F4/README.md create mode 100644 Marlin/src/HAL/HAL_STM32F4/SanityCheck.h create mode 100644 Marlin/src/HAL/HAL_STM32F4/endstop_interrupts.h create mode 100644 Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h create mode 100644 Marlin/src/HAL/HAL_STM32F4/persistent_store_impl.cpp create mode 100644 Marlin/src/HAL/HAL_STM32F4/pinsDebug.h create mode 100644 Marlin/src/HAL/HAL_STM32F4/spi_pins.h create mode 100644 Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.cpp create mode 100644 Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.h create mode 100644 Marlin/src/config/examples/STM32F4/Configuration.h create mode 100644 Marlin/src/pins/pins_STM32F4.h diff --git a/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.cpp b/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.cpp new file mode 100644 index 000000000..19d5eeaae --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.cpp @@ -0,0 +1,571 @@ +/** + ****************************************************************************** + * @file EEPROM/EEPROM_Emulation/src/eeprom.c + * @author MCD Application Team + * @version V1.2.6 + * @date 04-November-2016 + * @brief This file provides all the EEPROM emulation firmware functions. + ****************************************************************************** + * @attention + * + *

© Copyright © 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/** @addtogroup EEPROM_Emulation + * @{ + */ +#ifdef STM32F4 + +/* Includes ------------------------------------------------------------------*/ +#include "eeprom_emul.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Global variable used to store variable value in read sequence */ +uint16_t DataVar = 0; + +/* Virtual address defined by the user: 0xFFFF value is prohibited */ +uint16_t VirtAddVarTab[NB_OF_VAR]; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +static HAL_StatusTypeDef EE_Format(void); +static uint16_t EE_FindValidPage(uint8_t Operation); +static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data); +static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data); +static uint16_t EE_VerifyPageFullyErased(uint32_t Address); + +/** + * @brief Restore the pages to a known good state in case of page's status + * corruption after a power loss. + * @param None. + * @retval - Flash error code: on write Flash error + * - FLASH_COMPLETE: on success + */ +uint16_t EE_Initialise(void) { + uint16_t PageStatus0 = 6, PageStatus1 = 6; + uint16_t VarIdx = 0; + uint16_t EepromStatus = 0, ReadStatus = 0; + int16_t x = -1; + HAL_StatusTypeDef FlashStatus; + uint32_t SectorError = 0; + FLASH_EraseInitTypeDef pEraseInit; + + + /* Get Page0 status */ + PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS); + /* Get Page1 status */ + PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS); + + pEraseInit.TypeErase = TYPEERASE_SECTORS; + pEraseInit.Sector = PAGE0_ID; + pEraseInit.NbSectors = 1; + pEraseInit.VoltageRange = VOLTAGE_RANGE; + + /* Check for invalid header states and repair if necessary */ + switch (PageStatus0) { + case ERASED: + if (PageStatus1 == VALID_PAGE) { /* Page0 erased, Page1 valid */ + /* Erase Page0 */ + if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) { + FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) { + return FlashStatus; + } + } + } + else if (PageStatus1 == RECEIVE_DATA) { /* Page0 erased, Page1 receive */ + /* Erase Page0 */ + if (!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) { + FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + /* Mark Page1 as valid */ + FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE1_BASE_ADDRESS, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + else { /* First EEPROM access (Page0&1 are erased) or invalid state -> format EEPROM */ + /* Erase both Page0 and Page1 and set Page0 as valid page */ + FlashStatus = EE_Format(); + /* If erase/program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + break; + + case RECEIVE_DATA: + if (PageStatus1 == VALID_PAGE) { /* Page0 receive, Page1 valid */ + /* Transfer data from Page1 to Page0 */ + for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) { + if (( *(__IO uint16_t*)(PAGE0_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx]) + x = VarIdx; + if (VarIdx != x) { + /* Read the last variables' updates */ + ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar); + /* In case variable corresponding to the virtual address was found */ + if (ReadStatus != 0x1) { + /* Transfer the variable to the Page0 */ + EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar); + /* If program operation was failed, a Flash error code is returned */ + if (EepromStatus != HAL_OK) return EepromStatus; + } + } + } + /* Mark Page0 as valid */ + FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE0_BASE_ADDRESS, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + pEraseInit.Sector = PAGE1_ID; + pEraseInit.NbSectors = 1; + pEraseInit.VoltageRange = VOLTAGE_RANGE; + /* Erase Page1 */ + if (!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) { + FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + } + else if (PageStatus1 == ERASED) { /* Page0 receive, Page1 erased */ + pEraseInit.Sector = PAGE1_ID; + pEraseInit.NbSectors = 1; + pEraseInit.VoltageRange = VOLTAGE_RANGE; + /* Erase Page1 */ + if (!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) { + FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + /* Mark Page0 as valid */ + FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE0_BASE_ADDRESS, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + else { /* Invalid state -> format eeprom */ + /* Erase both Page0 and Page1 and set Page0 as valid page */ + FlashStatus = EE_Format(); + /* If erase/program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + break; + + case VALID_PAGE: + if (PageStatus1 == VALID_PAGE) { /* Invalid state -> format eeprom */ + /* Erase both Page0 and Page1 and set Page0 as valid page */ + FlashStatus = EE_Format(); + /* If erase/program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + else if (PageStatus1 == ERASED) { /* Page0 valid, Page1 erased */ + pEraseInit.Sector = PAGE1_ID; + pEraseInit.NbSectors = 1; + pEraseInit.VoltageRange = VOLTAGE_RANGE; + /* Erase Page1 */ + if (!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) { + FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + } + else { /* Page0 valid, Page1 receive */ + /* Transfer data from Page0 to Page1 */ + for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) { + if ((*(__IO uint16_t*)(PAGE1_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx]) + x = VarIdx; + + if (VarIdx != x) { + /* Read the last variables' updates */ + ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar); + /* In case variable corresponding to the virtual address was found */ + if (ReadStatus != 0x1) { + /* Transfer the variable to the Page1 */ + EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar); + /* If program operation was failed, a Flash error code is returned */ + if (EepromStatus != HAL_OK) return EepromStatus; + } + } + } + /* Mark Page1 as valid */ + FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE1_BASE_ADDRESS, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + pEraseInit.Sector = PAGE0_ID; + pEraseInit.NbSectors = 1; + pEraseInit.VoltageRange = VOLTAGE_RANGE; + /* Erase Page0 */ + if (!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) { + FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + } + break; + + default: /* Any other state -> format eeprom */ + /* Erase both Page0 and Page1 and set Page0 as valid page */ + FlashStatus = EE_Format(); + /* If erase/program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + break; + } + + return HAL_OK; +} + +/** + * @brief Verify if specified page is fully erased. + * @param Address: page address + * This parameter can be one of the following values: + * @arg PAGE0_BASE_ADDRESS: Page0 base address + * @arg PAGE1_BASE_ADDRESS: Page1 base address + * @retval page fully erased status: + * - 0: if Page not erased + * - 1: if Page erased + */ +uint16_t EE_VerifyPageFullyErased(uint32_t Address) { + uint32_t ReadStatus = 1; + uint16_t AddressValue = 0x5555; + /* Check each active page address starting from end */ + while (Address <= PAGE0_END_ADDRESS) { + /* Get the current location content to be compared with virtual address */ + AddressValue = (*(__IO uint16_t*)Address); + /* Compare the read address with the virtual address */ + if (AddressValue != ERASED) { + /* In case variable value is read, reset ReadStatus flag */ + ReadStatus = 0; + break; + } + /* Next address location */ + Address += 4; + } + /* Return ReadStatus value: (0: Page not erased, 1: Sector erased) */ + return ReadStatus; +} + +/** + * @brief Returns the last stored variable data, if found, which correspond to + * the passed virtual address + * @param VirtAddress: Variable virtual address + * @param Data: Global variable contains the read variable value + * @retval Success or error status: + * - 0: if variable was found + * - 1: if the variable was not found + * - NO_VALID_PAGE: if no valid page was found. + */ +uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data) { + uint16_t ValidPage = PAGE0; + uint16_t AddressValue = 0x5555, ReadStatus = 1; + uint32_t Address = EEPROM_START_ADDRESS, PageStartAddress = EEPROM_START_ADDRESS; + + /* Get active Page for read operation */ + ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE); + + /* Check if there is no valid page */ + if (ValidPage == NO_VALID_PAGE) return NO_VALID_PAGE; + + /* Get the valid Page start Address */ + PageStartAddress = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE)); + + /* Get the valid Page end Address */ + Address = (uint32_t)((EEPROM_START_ADDRESS - 2) + (uint32_t)((1 + ValidPage) * PAGE_SIZE)); + + /* Check each active page address starting from end */ + while (Address > (PageStartAddress + 2)) { + /* Get the current location content to be compared with virtual address */ + AddressValue = (*(__IO uint16_t*)Address); + + /* Compare the read address with the virtual address */ + if (AddressValue == VirtAddress) { + /* Get content of Address-2 which is variable value */ + *Data = (*(__IO uint16_t*)(Address - 2)); + /* In case variable value is read, reset ReadStatus flag */ + ReadStatus = 0; + break; + } + else /* Next address location */ + Address -= 4; + } + /* Return ReadStatus value: (0: variable exist, 1: variable doesn't exist) */ + return ReadStatus; +} + +/** + * @brief Writes/upadtes variable data in EEPROM. + * @param VirtAddress: Variable virtual address + * @param Data: 16 bit data to be written + * @retval Success or error status: + * - FLASH_COMPLETE: on success + * - PAGE_FULL: if valid page is full + * - NO_VALID_PAGE: if no valid page was found + * - Flash error code: on write Flash error + */ +uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data) { + /* Write the variable virtual address and value in the EEPROM */ + uint16_t Status = EE_VerifyPageFullWriteVariable(VirtAddress, Data); + + /* In case the EEPROM active page is full */ + if (Status == PAGE_FULL) /* Perform Page transfer */ + Status = EE_PageTransfer(VirtAddress, Data); + + /* Return last operation status */ + return Status; +} + +/** + * @brief Erases PAGE and PAGE1 and writes VALID_PAGE header to PAGE + * @param None + * @retval Status of the last operation (Flash write or erase) done during + * EEPROM formating + */ +static HAL_StatusTypeDef EE_Format(void) { + HAL_StatusTypeDef FlashStatus = HAL_OK; + uint32_t SectorError = 0; + FLASH_EraseInitTypeDef pEraseInit; + + pEraseInit.TypeErase = FLASH_TYPEERASE_SECTORS; + pEraseInit.Sector = PAGE0_ID; + pEraseInit.NbSectors = 1; + pEraseInit.VoltageRange = VOLTAGE_RANGE; + /* Erase Page0 */ + if (!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) { + FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + /* Set Page0 as valid page: Write VALID_PAGE at Page0 base address */ + FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE0_BASE_ADDRESS, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + + pEraseInit.Sector = PAGE1_ID; + /* Erase Page1 */ + if (!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) { + FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + } + + return HAL_OK; +} + +/** + * @brief Find valid Page for write or read operation + * @param Operation: operation to achieve on the valid page. + * This parameter can be one of the following values: + * @arg READ_FROM_VALID_PAGE: read operation from valid page + * @arg WRITE_IN_VALID_PAGE: write operation from valid page + * @retval Valid page number (PAGE or PAGE1) or NO_VALID_PAGE in case + * of no valid page was found + */ +static uint16_t EE_FindValidPage(uint8_t Operation) { + uint16_t PageStatus0 = 6, PageStatus1 = 6; + + /* Get Page0 actual status */ + PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS); + + /* Get Page1 actual status */ + PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS); + + /* Write or read operation */ + switch (Operation) { + case WRITE_IN_VALID_PAGE: /* ---- Write operation ---- */ + if (PageStatus1 == VALID_PAGE) { + /* Page0 receiving data */ + if (PageStatus0 == RECEIVE_DATA) return PAGE0; /* Page0 valid */ + else return PAGE1; /* Page1 valid */ + } + else if (PageStatus0 == VALID_PAGE) { + /* Page1 receiving data */ + if (PageStatus1 == RECEIVE_DATA) return PAGE1; /* Page1 valid */ + else return PAGE0; /* Page0 valid */ + } + else + return NO_VALID_PAGE; /* No valid Page */ + + case READ_FROM_VALID_PAGE: /* ---- Read operation ---- */ + if (PageStatus0 == VALID_PAGE) + return PAGE0; /* Page0 valid */ + else if (PageStatus1 == VALID_PAGE) + return PAGE1; /* Page1 valid */ + else + return NO_VALID_PAGE; /* No valid Page */ + + default: + return PAGE0; /* Page0 valid */ + } +} + +/** + * @brief Verify if active page is full and Writes variable in EEPROM. + * @param VirtAddress: 16 bit virtual address of the variable + * @param Data: 16 bit data to be written as variable value + * @retval Success or error status: + * - FLASH_COMPLETE: on success + * - PAGE_FULL: if valid page is full + * - NO_VALID_PAGE: if no valid page was found + * - Flash error code: on write Flash error + */ +static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data) { + HAL_StatusTypeDef FlashStatus = HAL_OK; + uint16_t ValidPage = PAGE0; + uint32_t Address = EEPROM_START_ADDRESS, PageEndAddress = EEPROM_START_ADDRESS+PAGE_SIZE; + + /* Get valid Page for write operation */ + ValidPage = EE_FindValidPage(WRITE_IN_VALID_PAGE); + + /* Check if there is no valid page */ + if (ValidPage == NO_VALID_PAGE) return NO_VALID_PAGE; + + /* Get the valid Page start Address */ + Address = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE)); + + /* Get the valid Page end Address */ + PageEndAddress = (uint32_t)((EEPROM_START_ADDRESS - 1) + (uint32_t)((ValidPage + 1) * PAGE_SIZE)); + + /* Check each active page address starting from begining */ + while (Address < PageEndAddress) { + /* Verify if Address and Address+2 contents are 0xFFFFFFFF */ + if ((*(__IO uint32_t*)Address) == 0xFFFFFFFF) { + /* Set variable data */ + FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, Address, Data); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + /* Set variable virtual address */ + FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, Address + 2, VirtAddress); + /* Return program operation status */ + return FlashStatus; + } + else /* Next address location */ + Address += 4; + } + + /* Return PAGE_FULL in case the valid page is full */ + return PAGE_FULL; +} + +/** + * @brief Transfers last updated variables data from the full Page to + * an empty one. + * @param VirtAddress: 16 bit virtual address of the variable + * @param Data: 16 bit data to be written as variable value + * @retval Success or error status: + * - FLASH_COMPLETE: on success + * - PAGE_FULL: if valid page is full + * - NO_VALID_PAGE: if no valid page was found + * - Flash error code: on write Flash error + */ +static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data) { + HAL_StatusTypeDef FlashStatus = HAL_OK; + uint32_t NewPageAddress = EEPROM_START_ADDRESS; + uint16_t OldPageId=0; + uint16_t ValidPage = PAGE0, VarIdx = 0; + uint16_t EepromStatus = 0, ReadStatus = 0; + uint32_t SectorError = 0; + FLASH_EraseInitTypeDef pEraseInit; + + /* Get active Page for read operation */ + ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE); + + if (ValidPage == PAGE1) { /* Page1 valid */ + /* New page address where variable will be moved to */ + NewPageAddress = PAGE0_BASE_ADDRESS; + /* Old page ID where variable will be taken from */ + OldPageId = PAGE1_ID; + } + else if (ValidPage == PAGE0) { /* Page0 valid */ + /* New page address where variable will be moved to */ + NewPageAddress = PAGE1_BASE_ADDRESS; + /* Old page ID where variable will be taken from */ + OldPageId = PAGE0_ID; + } + else + return NO_VALID_PAGE; /* No valid Page */ + + /* Set the new Page status to RECEIVE_DATA status */ + FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, NewPageAddress, RECEIVE_DATA); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + + /* Write the variable passed as parameter in the new active page */ + EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data); + /* If program operation was failed, a Flash error code is returned */ + if (EepromStatus != HAL_OK) return EepromStatus; + + /* Transfer process: transfer variables from old to the new active page */ + for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) { + if (VirtAddVarTab[VarIdx] != VirtAddress) { /* Check each variable except the one passed as parameter */ + /* Read the other last variable updates */ + ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar); + /* In case variable corresponding to the virtual address was found */ + if (ReadStatus != 0x1) { + /* Transfer the variable to the new active page */ + EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar); + /* If program operation was failed, a Flash error code is returned */ + if (EepromStatus != HAL_OK) return EepromStatus; + } + } + } + + pEraseInit.TypeErase = TYPEERASE_SECTORS; + pEraseInit.Sector = OldPageId; + pEraseInit.NbSectors = 1; + pEraseInit.VoltageRange = VOLTAGE_RANGE; + + /* Erase the old Page: Set old Page status to ERASED status */ + FlashStatus = HAL_FLASHEx_Erase(&pEraseInit, &SectorError); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + + /* Set new Page status to VALID_PAGE status */ + FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, NewPageAddress, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) return FlashStatus; + + /* Return last operation flash status */ + return FlashStatus; +} + +#endif // STM32F4 + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h b/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h new file mode 100644 index 000000000..476baee92 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/EEPROM_Emul/eeprom_emul.h @@ -0,0 +1,117 @@ +/** + ****************************************************************************** + * @file EEPROM/EEPROM_Emulation/inc/eeprom.h + * @author MCD Application Team + * @version V1.2.6 + * @date 04-November-2016 + * @brief This file contains all the functions prototypes for the EEPROM + * emulation firmware library. + ****************************************************************************** + * @attention + * + *

© Copyright � 2016 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __EEEPROM_EMUL_H +#define __EEEPROM_EMUL_H + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- +#include "../../../inc/MarlinConfig.h" +#include "../HAL.h" + +/* Exported constants --------------------------------------------------------*/ +/* EEPROM emulation firmware error codes */ +#define EE_OK (uint32_t)HAL_OK +#define EE_ERROR (uint32_t)HAL_ERROR +#define EE_BUSY (uint32_t)HAL_BUSY +#define EE_TIMEOUT (uint32_t)HAL_TIMEOUT + +/* Define the size of the sectors to be used */ +#define PAGE_SIZE (uint32_t)0x4000 /* Page size = 16KByte */ + +/* Device voltage range supposed to be [2.7V to 3.6V], the operation will + be done by word */ +#define VOLTAGE_RANGE (uint8_t)VOLTAGE_RANGE_3 + +/* EEPROM start address in Flash */ +#define EEPROM_START_ADDRESS ((uint32_t)0x08078000) /* EEPROM emulation start address: + after 480KByte of used Flash memory */ + +/* Pages 0 and 1 base and end addresses */ +#define PAGE0_BASE_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + 0x0000)) +#define PAGE0_END_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + (PAGE_SIZE - 1))) +#define PAGE0_ID FLASH_SECTOR_1 + +#define PAGE1_BASE_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + 0x4000)) +#define PAGE1_END_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + (2 * PAGE_SIZE - 1))) +#define PAGE1_ID FLASH_SECTOR_2 + +/* Used Flash pages for EEPROM emulation */ +#define PAGE0 ((uint16_t)0x0000) +#define PAGE1 ((uint16_t)0x0001) /* Page nb between PAGE0_BASE_ADDRESS & PAGE1_BASE_ADDRESS*/ + +/* No valid page define */ +#define NO_VALID_PAGE ((uint16_t)0x00AB) + +/* Page status definitions */ +#define ERASED ((uint16_t)0xFFFF) /* Page is empty */ +#define RECEIVE_DATA ((uint16_t)0xEEEE) /* Page is marked to receive data */ +#define VALID_PAGE ((uint16_t)0x0000) /* Page containing valid data */ + +/* Valid pages in read and write defines */ +#define READ_FROM_VALID_PAGE ((uint8_t)0x00) +#define WRITE_IN_VALID_PAGE ((uint8_t)0x01) + +/* Page full define */ +#define PAGE_FULL ((uint8_t)0x80) + +/* Variables' number */ +#define NB_OF_VAR ((uint16_t)4096) + +/* Exported types ------------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +uint16_t EE_Initialise(void); +uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data); +uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data); + +#endif /* __EEEPROM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Marlin/src/HAL/HAL_STM32F4/EmulatedEeprom.cpp b/Marlin/src/HAL/HAL_STM32F4/EmulatedEeprom.cpp new file mode 100644 index 000000000..667948a53 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/EmulatedEeprom.cpp @@ -0,0 +1,143 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifdef STM32F4 + +/** + * Description: functions for I2C connected external EEPROM. + * Not platform dependent. + */ + +#include "../../inc/MarlinConfig.h" + +#if ENABLED(EEPROM_SETTINGS) && DISABLED(I2C_EEPROM) && DISABLED(SPI_EEPROM) + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "HAL.h" +#include "EEPROM_Emul/eeprom_emul.h" + + +// -------------------------------------------------------------------------- +// Externals +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Local defines +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private Variables +// -------------------------------------------------------------------------- +static bool eeprom_initialised = false; +// -------------------------------------------------------------------------- +// Function prototypes +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private functions +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +// FLASH_FLAG_PGSERR (Programming Sequence Error) was renamed to +// FLASH_FLAG_ERSERR (Erasing Sequence Error) in STM32F4 +// #define FLASH_FLAG_PGSERR FLASH_FLAG_ERSERR + +// -------------------------------------------------------------------------- +// EEPROM +// -------------------------------------------------------------------------- + + +void eeprom_init() { + if (!eeprom_initialised) { + HAL_FLASH_Unlock(); + + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR); + + /* EEPROM Init */ + if (EE_Initialise() != EE_OK) + for (;;) HAL_Delay(1); // Spin forever until watchdog reset + + HAL_FLASH_Lock(); + eeprom_initialised = true; + } +} + +void eeprom_write_byte(unsigned char *pos, unsigned char value) { + uint16_t eeprom_address = (unsigned) pos; + + eeprom_init(); + + HAL_FLASH_Unlock(); + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR); + + if (EE_WriteVariable(eeprom_address, (uint16_t) value) != EE_OK) + for (;;) HAL_Delay(1); // Spin forever until watchdog reset + + HAL_FLASH_Lock(); +} + +unsigned char eeprom_read_byte(unsigned char *pos) { + uint16_t data = 0xFF; + uint16_t eeprom_address = (unsigned)pos; + + eeprom_init(); + + if (EE_ReadVariable(eeprom_address, &data) != EE_OK) { + return (unsigned char)data; + } + return (unsigned char)data; +} + +void eeprom_read_block(void *__dst, const void *__src, size_t __n) { + uint16_t data = 0xFF; + uint16_t eeprom_address = (unsigned) __src; + + eeprom_init(); + + for (uint8_t c = 0; c < __n; c++) { + EE_ReadVariable(eeprom_address+c, &data); + *((uint8_t*)__dst + c) = data; + } +} + +void eeprom_update_block(const void *__src, void *__dst, size_t __n) { + +} + +#endif // ENABLED(EEPROM_SETTINGS) && DISABLED(I2C_EEPROM) && DISABLED(SPI_EEPROM) +#endif // STM32F4 + diff --git a/Marlin/src/HAL/HAL_STM32F4/HAL.cpp b/Marlin/src/HAL/HAL_STM32F4/HAL.cpp new file mode 100644 index 000000000..a7180d38c --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/HAL.cpp @@ -0,0 +1,140 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * Copyright (c) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + + +#ifdef STM32F4 + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "HAL.h" + +//#include + +// -------------------------------------------------------------------------- +// Externals +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Local defines +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +uint16_t HAL_adc_result; + +// -------------------------------------------------------------------------- +// Private Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Function prototypes +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private functions +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +/* VGPV Done with defines +// disable interrupts +void cli(void) { noInterrupts(); } + +// enable interrupts +void sei(void) { interrupts(); } +*/ + +void HAL_clear_reset_source(void) { __HAL_RCC_CLEAR_RESET_FLAGS(); } + +uint8_t HAL_get_reset_source (void) { + if (__HAL_RCC_GET_FLAG(RCC_FLAG_IWDGRST) != RESET) + return RST_WATCHDOG; + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_SFTRST) != RESET) + return RST_SOFTWARE; + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_PINRST) != RESET) + return RST_EXTERNAL; + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_PORRST) != RESET) + return RST_POWER_ON; + return 0; +} + +void _delay_ms(const int delay_ms) { delay(delay_ms); } + +extern "C" { + extern unsigned int _ebss; // end of bss section +} + +// return free memory between end of heap (or end bss) and whatever is current + +/* +#include "wirish/syscalls.c" +//extern caddr_t _sbrk(int incr); +#ifndef CONFIG_HEAP_END +extern char _lm_heap_end; +#define CONFIG_HEAP_END ((caddr_t)&_lm_heap_end) +#endif + +extern "C" { + static int freeMemory() { + char top = 't'; + return &top - reinterpret_cast(sbrk(0)); + } + int freeMemory() { + int free_memory; + int heap_end = (int)_sbrk(0); + free_memory = ((int)&free_memory) - ((int)heap_end); + return free_memory; + } +} +*/ + +// -------------------------------------------------------------------------- +// ADC +// -------------------------------------------------------------------------- + +void HAL_adc_start_conversion(const uint8_t adc_pin) { + HAL_adc_result = analogRead(adc_pin); +} + +uint16_t HAL_adc_get_result(void) { + return HAL_adc_result; +} + +#endif // STM32F4 diff --git a/Marlin/src/HAL/HAL_STM32F4/HAL.h b/Marlin/src/HAL/HAL_STM32F4/HAL.h new file mode 100644 index 000000000..f1cd29142 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/HAL.h @@ -0,0 +1,249 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * Copyright (c) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + + + +#ifndef _HAL_STM32F4_H +#define _HAL_STM32F4_H + +#define CPU_32_BIT +#undef DEBUG_NONE + +#ifndef vsnprintf_P + #define vsnprintf_P vsnprintf +#endif + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include + +#include "Arduino.h" + +#include "../math_32bit.h" +#include "../HAL_SPI.h" +#include "fastio_STM32F4.h" +#include "watchdog_STM32F4.h" + +#include "HAL_timers_STM32F4.h" + + +// -------------------------------------------------------------------------- +// Defines +// -------------------------------------------------------------------------- + +//Serial override +//extern HalSerial usb_serial; + +#if SERIAL_PORT == 0 + #error "Serial port 0 does not exist" +#endif + +#if !WITHIN(SERIAL_PORT, -1, 6) + #error "SERIAL_PORT must be from -1 to 6" +#endif +#if SERIAL_PORT == -1 + #define MYSERIAL0 SerialUSB +#elif SERIAL_PORT == 1 + #define MYSERIAL0 SerialUART1 +#elif SERIAL_PORT == 2 + #define MYSERIAL0 SerialUART2 +#elif SERIAL_PORT == 3 + #define MYSERIAL0 SerialUART3 +#elif SERIAL_PORT == 4 + #define MYSERIAL0 SerialUART4 +#elif SERIAL_PORT == 5 + #define MYSERIAL0 SerialUART5 +#elif SERIAL_PORT == 6 + #define MYSERIAL0 SerialUART6 +#endif + +#ifdef SERIAL_PORT_2 + #if SERIAL_PORT_2 == 0 + #error "Serial port 0 does not exist" + #endif + + #if !WITHIN(SERIAL_PORT_2, -1, 6) + #error "SERIAL_PORT_2 must be from -1 to 6" + #elif SERIAL_PORT_2 == SERIAL_PORT + #error "SERIAL_PORT_2 must be different than SERIAL_PORT" + #endif + #define NUM_SERIAL 2 + #if SERIAL_PORT_2 == -1 + #define MYSERIAL1 SerialUSB + #elif SERIAL_PORT_2 == 1 + #define MYSERIAL1 SerialUART1 + #elif SERIAL_PORT_2 == 2 + #define MYSERIAL1 SerialUART2 + #elif SERIAL_PORT_2 == 3 + #define MYSERIAL1 SerialUART3 + #elif SERIAL_PORT_2 == 4 + #define MYSERIAL1 SerialUART4 + #elif SERIAL_PORT_2 == 5 + #define MYSERIAL1 SerialUART5 + #elif SERIAL_PORT_2 == 6 + #define MYSERIAL1 SerialUART6 + #endif +#else + #define NUM_SERIAL 1 +#endif + +#define _BV(b) (1 << (b)) + +/** + * TODO: review this to return 1 for pins that are not analog input + */ +#ifndef analogInputToDigitalPin + #define analogInputToDigitalPin(p) (p) +#endif + +#define CRITICAL_SECTION_START noInterrupts(); +#define CRITICAL_SECTION_END interrupts(); + +// On AVR this is in math.h? +#define square(x) ((x)*(x)) + +#ifndef strncpy_P + #define strncpy_P(dest, src, num) strncpy((dest), (src), (num)) +#endif + +// Fix bug in pgm_read_ptr +#undef pgm_read_ptr +#define pgm_read_ptr(addr) (*(addr)) + +#define RST_POWER_ON 1 +#define RST_EXTERNAL 2 +#define RST_BROWN_OUT 4 +#define RST_WATCHDOG 8 +#define RST_JTAG 16 +#define RST_SOFTWARE 32 +#define RST_BACKUP 64 + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +typedef int8_t pin_t; + +#define HAL_SERVO_LIB libServo + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +/** result of last ADC conversion */ +extern uint16_t HAL_adc_result; + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +// Disable interrupts +#define cli() do { DISABLE_TEMPERATURE_INTERRUPT(); DISABLE_STEPPER_DRIVER_INTERRUPT(); } while(0) + +// Enable interrupts +#define sei() do { ENABLE_TEMPERATURE_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT(); } while(0) + +// Memory related +#define __bss_end __bss_end__ + +/** clear reset reason */ +void HAL_clear_reset_source (void); + +/** reset reason */ +uint8_t HAL_get_reset_source (void); + +void _delay_ms(const int delay); + +/* +extern "C" { + int freeMemory(void); +} +*/ + +extern "C" char* _sbrk(int incr); +/* +static int freeMemory() { + volatile int top; + top = (int)((char*)&top - reinterpret_cast(_sbrk(0))); + return top; +} +*/ +static int freeMemory() { + volatile char top; + return &top - reinterpret_cast(_sbrk(0)); +} + +// SPI: Extended functions which take a channel number (hardware SPI only) +/** Write single byte to specified SPI channel */ +void spiSend(uint32_t chan, byte b); +/** Write buffer to specified SPI channel */ +void spiSend(uint32_t chan, const uint8_t* buf, size_t n); +/** Read single byte from specified SPI channel */ +uint8_t spiRec(uint32_t chan); + + +// EEPROM + +/** + * TODO: Write all this eeprom stuff. Can emulate eeprom in flash as last resort. + * Wire library should work for i2c eeproms. + */ +void eeprom_write_byte(unsigned char *pos, unsigned char value); +unsigned char eeprom_read_byte(unsigned char *pos); +void eeprom_read_block (void *__dst, const void *__src, size_t __n); +void eeprom_update_block (const void *__src, void *__dst, size_t __n); + +// ADC + +#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT) + +inline void HAL_adc_init(void) {} + +#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin) +#define HAL_READ_ADC HAL_adc_result + +void HAL_adc_start_conversion(const uint8_t adc_pin); + +uint16_t HAL_adc_get_result(void); + +/* Todo: Confirm none of this is needed. +uint16_t HAL_getAdcReading(uint8_t chan); + +void HAL_startAdcConversion(uint8_t chan); +uint8_t HAL_pinToAdcChannel(int pin); + +uint16_t HAL_getAdcFreerun(uint8_t chan, bool wait_for_conversion = false); +//uint16_t HAL_getAdcSuperSample(uint8_t chan); + +void HAL_enable_AdcFreerun(void); +//void HAL_disable_AdcFreerun(uint8_t chan); + +*/ + +#define GET_PIN_MAP_PIN(index) index +#define GET_PIN_MAP_INDEX(pin) pin +#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) + +#endif // _HAL_STM32F4_H diff --git a/Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.cpp b/Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.cpp new file mode 100644 index 000000000..f8ce4715d --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.cpp @@ -0,0 +1,53 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (C) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifdef STM32F4 + +#include "../../inc/MarlinConfig.h" + +#if HAS_SERVOS + +#include "HAL_Servo_STM32F4.h" + +int8_t libServo::attach(const int pin) { + return Servo::attach(pin); +} + +int8_t libServo::attach(const int pin, const int min, const int max) { + return Servo::attach(pin, min, max); +} + +void libServo::move(const int value) { + constexpr uint16_t servo_delay[] = SERVO_DELAY; + static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long."); + if (this->attach(0) >= 0) { + this->write(value); + safe_delay(servo_delay[this->servoIndex]); + #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) + this->detach(); + #endif + } +} +#endif // HAS_SERVOS + +#endif // STM32F4 diff --git a/Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.h b/Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.h new file mode 100644 index 000000000..b68910387 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/HAL_Servo_STM32F4.h @@ -0,0 +1,41 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (C) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef HAL_SERVO_STM32F4_H +#define HAL_SERVO_STM32F4_H + +#include + +// Inherit and expand on the official library +class libServo : public Servo { +public: + int8_t attach(const int pin); + int8_t attach(const int pin, const int min, const int max); + void move(const int value); +private: + uint16_t min_ticks; + uint16_t max_ticks; + uint8_t servoIndex; // index into the channel data for this servo +}; + +#endif // HAL_SERVO_STM32F4_H diff --git a/Marlin/src/HAL/HAL_STM32F4/HAL_spi_STM32F4.cpp b/Marlin/src/HAL/HAL_STM32F4/HAL_spi_STM32F4.cpp new file mode 100644 index 000000000..4c7d69288 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/HAL_spi_STM32F4.cpp @@ -0,0 +1,165 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (C) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Software SPI functions originally from Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + */ + +/** + * Adapted to the STM32F4 HAL + */ + +#ifdef STM32F4 + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "HAL.h" +#include "../HAL_SPI.h" +#include "pins_arduino.h" +#include "spi_pins.h" +#include "../../core/macros.h" +#include + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +static SPISettings spiConfig; + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +#if ENABLED(SOFTWARE_SPI) + // -------------------------------------------------------------------------- + // Software SPI + // -------------------------------------------------------------------------- + #error "Software SPI not supported for STM32F4. Use hardware SPI." + +#else + +// -------------------------------------------------------------------------- +// Hardware SPI +// -------------------------------------------------------------------------- + +/** + * VGPV SPI speed start and F_CPU/2, by default 72/2 = 36Mhz + */ + +/** + * @brief Begin SPI port setup + * + * @return Nothing + * + * @details Only configures SS pin since libmaple creates and initialize the SPI object + */ +void spiBegin(void) { + #if !PIN_EXISTS(SS) + #error SS_PIN not defined! + #endif + + SET_OUTPUT(SS_PIN); + WRITE(SS_PIN, HIGH); +} + +/** Configure SPI for specified SPI speed */ +void spiInit(uint8_t spiRate) { + // Use datarates Marlin uses + uint32_t clock; + switch (spiRate) { + case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000 + case SPI_HALF_SPEED: clock = 5000000; break; + case SPI_QUARTER_SPEED: clock = 2500000; break; + case SPI_EIGHTH_SPEED: clock = 1250000; break; + case SPI_SPEED_5: clock = 625000; break; + case SPI_SPEED_6: clock = 300000; break; + default: + clock = 4000000; // Default from the SPI libarary + } + spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0); + SPI.begin(); +} + +/** + * @brief Receives a single byte from the SPI port. + * + * @return Byte received + * + * @details + */ +uint8_t spiRec(void) { + SPI.beginTransaction(spiConfig); + uint8_t returnByte = SPI.transfer(0xFF); + SPI.endTransaction(); + return returnByte; +} + +/** + * @brief Receives a number of bytes from the SPI port to a buffer + * + * @param buf Pointer to starting address of buffer to write to. + * @param nbyte Number of bytes to receive. + * @return Nothing + * + * @details Uses DMA + */ +void spiRead(uint8_t* buf, uint16_t nbyte) { + SPI.beginTransaction(spiConfig); + SPI.dmaTransfer(0, const_cast(buf), nbyte); + SPI.endTransaction(); +} + +/** + * @brief Sends a single byte on SPI port + * + * @param b Byte to send + * + * @details + */ +void spiSend(uint8_t b) { + SPI.beginTransaction(spiConfig); + SPI.transfer(b); + SPI.endTransaction(); +} + +/** + * @brief Write token and then write from 512 byte buffer to SPI (for SD card) + * + * @param buf Pointer with buffer start address + * @return Nothing + * + * @details Use DMA + */ +void spiSendBlock(uint8_t token, const uint8_t* buf) { + SPI.beginTransaction(spiConfig); + SPI.transfer(token); + SPI.dmaSend(const_cast(buf), 512); + SPI.endTransaction(); +} + +#endif // SOFTWARE_SPI + +#endif // STM32F4 diff --git a/Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.cpp b/Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.cpp new file mode 100644 index 000000000..02c07b114 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.cpp @@ -0,0 +1,156 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifdef STM32F4 + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "HAL.h" + +#include "HAL_timers_STM32F4.h" + +// -------------------------------------------------------------------------- +// Externals +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Local defines +// -------------------------------------------------------------------------- + +#define NUM_HARDWARE_TIMERS 2 + +//#define PRESCALER 1 +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private Variables +// -------------------------------------------------------------------------- + +tTimerConfig timerConfig[NUM_HARDWARE_TIMERS]; + +// -------------------------------------------------------------------------- +// Function prototypes +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Private functions +// -------------------------------------------------------------------------- + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +bool timers_initialised[NUM_HARDWARE_TIMERS] = {false}; + +void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { + + if (!timers_initialised[timer_num]) { + switch (timer_num) { + case STEP_TIMER_NUM: + //STEPPER TIMER TIM5 //use a 32bit timer + __HAL_RCC_TIM5_CLK_ENABLE(); + timerConfig[0].timerdef.Instance = TIM5; + timerConfig[0].timerdef.Init.Prescaler = (STEPPER_TIMER_PRESCALE); + timerConfig[0].timerdef.Init.CounterMode = TIM_COUNTERMODE_UP; + timerConfig[0].timerdef.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + timerConfig[0].IRQ_Id = TIM5_IRQn; + timerConfig[0].callback = (uint32_t)TC5_Handler; + HAL_NVIC_SetPriority(timerConfig[0].IRQ_Id, 1, 0); + break; + case TEMP_TIMER_NUM: + //TEMP TIMER TIM7 // any available 16bit Timer (1 already used for PWM) + __HAL_RCC_TIM7_CLK_ENABLE(); + timerConfig[1].timerdef.Instance = TIM7; + timerConfig[1].timerdef.Init.Prescaler = (TEMP_TIMER_PRESCALE); + timerConfig[1].timerdef.Init.CounterMode = TIM_COUNTERMODE_UP; + timerConfig[1].timerdef.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + timerConfig[1].IRQ_Id = TIM7_IRQn; + timerConfig[1].callback = (uint32_t)TC7_Handler; + HAL_NVIC_SetPriority(timerConfig[1].IRQ_Id, 2, 0); + break; + } + timers_initialised[timer_num] = true; + } + + timerConfig[timer_num].timerdef.Init.Period = (((HAL_TIMER_RATE) / timerConfig[timer_num].timerdef.Init.Prescaler) / frequency) - 1; + + if (HAL_TIM_Base_Init(&timerConfig[timer_num].timerdef) == HAL_OK) + HAL_TIM_Base_Start_IT(&timerConfig[timer_num].timerdef); +} + +//forward the interrupt +extern "C" void TIM5_IRQHandler() { + ((void(*)(void))timerConfig[0].callback)(); +} +extern "C" void TIM7_IRQHandler() { + ((void(*)(void))timerConfig[1].callback)(); +} + +void HAL_timer_set_compare(const uint8_t timer_num, const uint32_t compare) { + __HAL_TIM_SetAutoreload(&timerConfig[timer_num].timerdef, compare); +} + +void HAL_timer_enable_interrupt(const uint8_t timer_num) { + HAL_NVIC_EnableIRQ(timerConfig[timer_num].IRQ_Id); +} + +void HAL_timer_disable_interrupt(const uint8_t timer_num) { + HAL_NVIC_DisableIRQ(timerConfig[timer_num].IRQ_Id); +} + +hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) { + return __HAL_TIM_GetAutoreload(&timerConfig[timer_num].timerdef); +} + +uint32_t HAL_timer_get_count(const uint8_t timer_num) { + return __HAL_TIM_GetCounter(&timerConfig[timer_num].timerdef); +} + +void HAL_timer_restrain(const uint8_t timer_num, const uint16_t interval_ticks) { + const hal_timer_t mincmp = HAL_timer_get_count(timer_num) + interval_ticks; + if (HAL_timer_get_compare(timer_num) < mincmp) HAL_timer_set_compare(timer_num, mincmp); +} + +void HAL_timer_isr_prologue(const uint8_t timer_num) { + if (__HAL_TIM_GET_FLAG(&timerConfig[timer_num].timerdef, TIM_FLAG_UPDATE) == SET) { + __HAL_TIM_CLEAR_FLAG(&timerConfig[timer_num].timerdef, TIM_FLAG_UPDATE); + } +} + +bool HAL_timer_interrupt_enabled(const uint8_t timer_num) { + if (NVIC->ISER[(uint32_t)((int32_t)timerConfig[timer_num].IRQ_Id) >> 5] & (uint32_t)(1 << ((uint32_t)((int32_t)timerConfig[timer_num].IRQ_Id) & (uint32_t)0x1F))) { + return true; + } + else { + return false; + } +} + +#endif // STM32F4 diff --git a/Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.h b/Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.h new file mode 100644 index 000000000..7c748cc33 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/HAL_timers_STM32F4.h @@ -0,0 +1,105 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef _HAL_TIMERS_STM32F4_H +#define _HAL_TIMERS_STM32F4_H + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include + +// -------------------------------------------------------------------------- +// Defines +// -------------------------------------------------------------------------- + +#define FORCE_INLINE __attribute__((always_inline)) inline + +#define hal_timer_t uint32_t // TODO: One is 16-bit, one 32-bit - does this need to be checked? +#define HAL_TIMER_TYPE_MAX 0xFFFF + +#define STEP_TIMER_NUM 0 // index of timer to use for stepper +#define TEMP_TIMER_NUM 1 // index of timer to use for temperature + +#define HAL_TIMER_RATE (HAL_RCC_GetSysClockFreq() / 2) // frequency of timer peripherals +#define STEPPER_TIMER_PRESCALE 54 // was 40,prescaler for setting stepper timer, 2Mhz +#define HAL_STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) // frequency of stepper timer (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) +#define HAL_TICKS_PER_US ((HAL_STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs + +#define PULSE_TIMER_NUM STEP_TIMER_NUM +#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE + +#define TEMP_TIMER_PRESCALE 1000 // prescaler for setting Temp timer, 72Khz +#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency + +#define STEP_TIMER_MIN_INTERVAL 8 // minimum time in µs between stepper interrupts + +#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM) +#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM) +#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM) + +#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM) +#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM) + +#define HAL_ENABLE_ISRs() do { if (thermalManager.in_temp_isr)DISABLE_TEMPERATURE_INTERRUPT(); else ENABLE_TEMPERATURE_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT(); } while(0) +// TODO change this + + +extern void TC5_Handler(); +extern void TC7_Handler(); +#define HAL_STEP_TIMER_ISR void TC5_Handler() +#define HAL_TEMP_TIMER_ISR void TC7_Handler() + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +typedef struct { + TIM_HandleTypeDef timerdef; + IRQn_Type IRQ_Id; + uint32_t callback; +} tTimerConfig; + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +//extern const tTimerConfig timerConfig[]; + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency); +void HAL_timer_enable_interrupt(const uint8_t timer_num); +void HAL_timer_disable_interrupt(const uint8_t timer_num); +bool HAL_timer_interrupt_enabled(const uint8_t timer_num); + +void HAL_timer_set_compare(const uint8_t timer_num, const uint32_t compare); +hal_timer_t HAL_timer_get_compare(const uint8_t timer_num); +uint32_t HAL_timer_get_count(const uint8_t timer_num); +void HAL_timer_restrain(const uint8_t timer_num, const uint16_t interval_ticks); + +void HAL_timer_isr_prologue(const uint8_t timer_num); + +#endif // _HAL_TIMERS_STM32F4_H diff --git a/Marlin/src/HAL/HAL_STM32F4/README.md b/Marlin/src/HAL/HAL_STM32F4/README.md new file mode 100644 index 000000000..10396e875 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/README.md @@ -0,0 +1,12 @@ +# This HAL is for the STM32F407 MCU used with STM32Generic Arduino core by danieleff. + +# Arduino core is located at: + +https://github.com/danieleff/STM32GENERIC + +Unzip it into [Arduino]/hardware folder + +# This HAL is in development. + +This HAL is a modified version of Chris Barr's Picoprint STM32F4 HAL. + diff --git a/Marlin/src/HAL/HAL_STM32F4/SanityCheck.h b/Marlin/src/HAL/HAL_STM32F4/SanityCheck.h new file mode 100644 index 000000000..8799c4eca --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/SanityCheck.h @@ -0,0 +1,66 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Test Re-ARM specific configuration values for errors at compile-time. + */ +#if ENABLED(SPINDLE_LASER_ENABLE) + #if !PIN_EXISTS(SPINDLE_LASER_ENABLE) + #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN." + #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR) + #error "SPINDLE_DIR_PIN not defined." + #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM) + #if !PWM_PIN(SPINDLE_LASER_PWM_PIN) + #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin." + #elif !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11) + #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector" + #elif SPINDLE_LASER_POWERUP_DELAY < 1 + #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0." + #elif SPINDLE_LASER_POWERDOWN_DELAY < 1 + #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0." + #elif !defined(SPINDLE_LASER_PWM_INVERT) + #error "SPINDLE_LASER_PWM_INVERT missing." + #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX) + #error "SPINDLE_LASER_PWM equation constant(s) missing." + #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN + #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN." + #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN." + #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN." + #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN." + #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN." + #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN." + #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN." + #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN + #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN." + #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN + #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN." + #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN." + #endif + #endif +#endif // SPINDLE_LASER_ENABLE diff --git a/Marlin/src/HAL/HAL_STM32F4/endstop_interrupts.h b/Marlin/src/HAL/HAL_STM32F4/endstop_interrupts.h new file mode 100644 index 000000000..cd7d96192 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/endstop_interrupts.h @@ -0,0 +1,77 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (C) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef _ENDSTOP_INTERRUPTS_H_ +#define _ENDSTOP_INTERRUPTS_H_ + +volatile uint8_t e_hit = 0; // Different from 0 when the endstops should be tested in detail. + // Must be reset to 0 by the test function when finished. + +// This is what is really done inside the interrupts. +FORCE_INLINE void endstop_ISR_worker( void ) { + e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice. +} + +// One ISR for all EXT-Interrupts +void endstop_ISR(void) { endstop_ISR_worker(); } + +void setup_endstop_interrupts(void) { + #if HAS_X_MAX + pinMode(X_MAX_PIN, INPUT); + attachInterrupt(X_MAX_PIN, endstop_ISR, CHANGE); // assign it + #endif + #if HAS_X_MIN + pinMode(X_MIN_PIN, INPUT); + attachInterrupt(X_MIN_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Y_MAX + pinMode(Y_MAX_PIN, INPUT); + attachInterrupt(Y_MAX_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Y_MIN + pinMode(Y_MIN_PIN, INPUT); + attachInterrupt(Y_MIN_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Z_MAX + pinMode(Z_MAX_PIN, INPUT); + attachInterrupt(Z_MAX_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Z_MIN + pinMode(Z_MIN_PIN, INPUT); + attachInterrupt(Z_MIN_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Z2_MAX + pinMode(Z2_MAX_PIN, INPUT); + attachInterrupt(Z2_MAX_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Z2_MIN + pinMode(Z2_MIN_PIN, INPUT); + attachInterrupt(Z2_MIN_PIN, endstop_ISR, CHANGE); + #endif + #if HAS_Z_MIN_PROBE_PIN + pinMode(Z_MIN_PROBE_PIN, INPUT); + attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE); + #endif +} + +#endif //_ENDSTOP_INTERRUPTS_H_ diff --git a/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h b/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h new file mode 100644 index 000000000..d22a49ce5 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h @@ -0,0 +1,54 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (C) 2017 Victor Perez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Fast I/O interfaces for STM32F4 + * These use GPIO functions instead of Direct Port Manipulation, as on AVR. + */ + +#ifndef _FASTIO_STM32F4_H +#define _FASTIO_STM32F4_H + +#define _BV(b) (1 << (b)) + +#define READ(IO) digitalRead(IO) +#define WRITE(IO, v) digitalWrite(IO,v) +#define TOGGLE(IO) do{ _SET_OUTPUT(IO); digitalWrite(IO,!digitalRead(IO)); }while(0) +#define WRITE_VAR(IO, v) digitalWrite(IO,v) + +#define _GET_MODE(IO) +#define _SET_MODE(IO,M) pinMode(IO, M) +#define _SET_OUTPUT(IO) pinMode(IO, OUTPUT) /*!< Output Push Pull Mode & GPIO_NOPULL */ + +#define SET_INPUT(IO) _SET_MODE(IO, INPUT) /*!< Input Floating Mode */ +#define SET_INPUT_PULLUP(IO) _SET_MODE(IO, INPUT_PULLUP) /*!< Input with Pull-up activation */ +#define SET_INPUT_PULLDOW(IO) _SET_MODE(IO, INPUT_PULLDOWN) /*!< Input with Pull-down activation */ +#define SET_OUTPUT(IO) do{ _SET_OUTPUT(IO); WRITE(IO, LOW); }while(0) + +#define GET_INPUT(IO) +#define GET_OUTPUT(IO) +#define GET_TIMER(IO) + +#define OUT_WRITE(IO, v) { _SET_OUTPUT(IO); WRITE(IO, v); } + +#endif // _FASTIO_STM32F4_H diff --git a/Marlin/src/HAL/HAL_STM32F4/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_STM32F4/persistent_store_impl.cpp new file mode 100644 index 000000000..018575983 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/persistent_store_impl.cpp @@ -0,0 +1,75 @@ +/** + * Marlin 3D Printer Firmware + * + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com + * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifdef STM32F4 + +#include "../persistent_store_api.h" + +#include "../../inc/MarlinConfig.h" + +#if ENABLED(EEPROM_SETTINGS) + +namespace HAL { +namespace PersistentStore { + +bool access_start() { return true; } + +bool access_finish() { return true; } + +bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) { + while (size--) { + uint8_t * const p = (uint8_t * const)pos; + uint8_t v = *value; + // EEPROM has only ~100,000 write cycles, + // so only write bytes that have changed! + if (v != eeprom_read_byte(p)) { + eeprom_write_byte(p, v); + if (eeprom_read_byte(p) != v) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE); + return true; + } + } + crc16(crc, &v, 1); + pos++; + value++; + }; + return false; +} + +bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing) { + do { + uint8_t c = eeprom_read_byte((unsigned char*)pos); + if (writing) *value = c; + crc16(crc, &c, 1); + pos++; + value++; + } while (--size); + return false; +} + +} // PersistentStore +} // HAL + +#endif // EEPROM_SETTINGS +#endif // STM32F4 diff --git a/Marlin/src/HAL/HAL_STM32F4/pinsDebug.h b/Marlin/src/HAL/HAL_STM32F4/pinsDebug.h new file mode 100644 index 000000000..e5022f79a --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/pinsDebug.h @@ -0,0 +1 @@ +#error Debug pins is not supported on this Platform! diff --git a/Marlin/src/HAL/HAL_STM32F4/spi_pins.h b/Marlin/src/HAL/HAL_STM32F4/spi_pins.h new file mode 100644 index 000000000..f178ac810 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/spi_pins.h @@ -0,0 +1,41 @@ +/** +* Marlin 3D Printer Firmware +* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 3 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +* +*/ + +#ifndef SPI_PINS_H_ +#define SPI_PINS_H_ + + +/** + * Define SPI Pins: SCK, MISO, MOSI, SS + * + */ +#ifndef SCK_PIN + #define SCK_PIN PA5 +#endif +#ifndef MISO_PIN + #define MISO_PIN PA6 +#endif +#ifndef MOSI_PIN + #define MOSI_PIN PA7 +#endif +#ifndef SS_PIN + #define SS_PIN PA8 +#endif + +#endif // SPI_PINS_H_ diff --git a/Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.cpp b/Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.cpp new file mode 100644 index 000000000..dfe597b23 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.cpp @@ -0,0 +1,57 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifdef STM32F4 + +#include "../../inc/MarlinConfig.h" + +#if ENABLED(USE_WATCHDOG) + + #include "watchdog_STM32F4.h" + + IWDG_HandleTypeDef hiwdg; + + void watchdog_init() { + hiwdg.Instance = IWDG; + hiwdg.Init.Prescaler = IWDG_PRESCALER_32; //32kHz LSI clock and 32x prescalar = 1024Hz IWDG clock + hiwdg.Init.Reload = 4095; //4095 counts = 4 seconds at 1024Hz + if (HAL_IWDG_Init(&hiwdg) != HAL_OK) { + //Error_Handler(); + } + } + + void watchdog_reset() { + /* Refresh IWDG: reload counter */ + if (HAL_IWDG_Refresh(&hiwdg) != HAL_OK) { + /* Refresh Error */ + //Error_Handler(); + } + else { + #if PIN_EXISTS(LED) + TOGGLE(LED_PIN); // heart beat indicator + #endif + } + } + +#endif // USE_WATCHDOG + +#endif // STM32F4 diff --git a/Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.h b/Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.h new file mode 100644 index 000000000..aace2329e --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F4/watchdog_STM32F4.h @@ -0,0 +1,33 @@ +/** +* Marlin 3D Printer Firmware +* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] +* +* Based on Sprinter and grbl. +* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 3 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +* +*/ + +#ifndef WATCHDOG_STM32F4_H +#define WATCHDOG_STM32F4_H + +#include "../../inc/MarlinConfig.h" + +extern IWDG_HandleTypeDef hiwdg; + +void watchdog_init(); +void watchdog_reset(); + +#endif // WATCHDOG_STM32F1_H diff --git a/Marlin/src/HAL/platforms.h b/Marlin/src/HAL/platforms.h index 0045e4439..e0387cf99 100644 --- a/Marlin/src/HAL/platforms.h +++ b/Marlin/src/HAL/platforms.h @@ -13,6 +13,8 @@ #define HAL_PLATFORM HAL_LPC1768 #elif defined(__STM32F1__) || defined(TARGET_STM32F1) #define HAL_PLATFORM HAL_STM32F1 +#elif defined(STM32F4) + #define HAL_PLATFORM HAL_STM32F4 #elif defined(STM32F7) #define HAL_PLATFORM HAL_STM32F7 #else diff --git a/Marlin/src/HAL/servo.cpp b/Marlin/src/HAL/servo.cpp index 26cf9533b..9635f92c4 100644 --- a/Marlin/src/HAL/servo.cpp +++ b/Marlin/src/HAL/servo.cpp @@ -54,7 +54,7 @@ #include "../inc/MarlinConfig.h" -#if HAS_SERVOS && !(IS_32BIT_TEENSY || defined(TARGET_LPC1768)) +#if HAS_SERVOS && !(IS_32BIT_TEENSY || defined(TARGET_LPC1768) || defined(STM32F4)) //#include #include "servo.h" diff --git a/Marlin/src/HAL/servo.h b/Marlin/src/HAL/servo.h index 7c521da0b..9f47dbede 100644 --- a/Marlin/src/HAL/servo.h +++ b/Marlin/src/HAL/servo.h @@ -74,7 +74,8 @@ #elif defined(TARGET_LPC1768) #include "HAL_LPC1768/LPC1768_Servo.h" - +#elif defined(STM32F4) + #include "HAL_STM32F4/HAL_Servo_STM32F4.h" #else #include diff --git a/Marlin/src/backtrace/unwmemaccess.cpp b/Marlin/src/backtrace/unwmemaccess.cpp index f7041d52d..02b46519c 100644 --- a/Marlin/src/backtrace/unwmemaccess.cpp +++ b/Marlin/src/backtrace/unwmemaccess.cpp @@ -62,6 +62,17 @@ #define END_FLASH_ADDR 0x00080000 #endif +#ifdef STM32F4 +// For STM32F407VET +// SRAM (0x20000000 - 0x20030000) (192kb) +// FLASH (0x08000000 - 0x08080000) (512kb) +// +#define START_SRAM_ADDR 0x20000000 +#define END_SRAM_ADDR 0x20030000 +#define START_FLASH_ADDR 0x08000000 +#define END_FLASH_ADDR 0x08080000 +#endif + #ifdef STM32F7 // For STM32F765 in BORG // SRAM (0x20000000 - 0x20080000) (512kb) diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h new file mode 100644 index 000000000..c0e332efe --- /dev/null +++ b/Marlin/src/config/examples/STM32F4/Configuration.h @@ -0,0 +1,1868 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 020000 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// config/examples/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// config/examples/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respecfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT -1 + +/** + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if available. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_STM32F4 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds a new code, M165, to set the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware M163, M164, and virtual extruder. + * - This implementation supports only a single extruder. + * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. +// It also enables the M302 command to set the minimum extrusion temperature +// or to allow moving the extruder regardless of the hotend temperature. +// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. +// Note that for Bowden Extruders a too-small value here may prevent loading. +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * Realtime Jerk Control + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * Because this is computationally-intensive, a 32-bit MCU is required. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define BEZIER_JERK_CONTROL + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Speed for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// Enable this option for Toshiba stepper drivers +//#define CONFIG_STEPPERS_TOSHIBA + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 200 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Use the LCD controller for bed leveling + * Requires MESH_BED_LEVELING or PROBE_MANUALLY + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, + * gl, hr, it, jp-kana, nl, pl, pt, pt-br, ru, sk, + * tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp-kana':'Japanese', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ +//#define ULTRA_LCD // Character based +//#define DOGLCD // Full graphics display + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +// +// CONTROLLER TYPE: Standard +// +// Marlin supports a wide variety of controllers. +// Enable one of the following options to specify your controller. +// + +// +// Original RADDS LCD Display+Encoder+SDCardReader +// http://doku.radds.org/dokumentation/lcd-display/ +// +//#define RADDS_DISPLAY + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// ANET and Tronxy Controller supported displays. +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// CONTROLLER TYPE: Shift register panels +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// AZSMZ 12864 LCD with SD +// https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html +// +//#define AZSMZ_12864 + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Servo deactivation +// +// With this option servos are powered only during movement, then turned off to prevent jitter. +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 248f74cb6..13691fb6f 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -207,6 +207,7 @@ #define BOARD_MALYAN_M200 1801 // STM32C8T6 Libmaple based stm32f1 controller #define BOARD_BEAST 1802 // STM32FxxxVxT6 Libmaple based stm32f4 controller #define BOARD_STM3R_MINI 1803 // STM32 Libmaple based stm32f1 controller +#define BOARD_STM32F4 1804 // STM32 STM32GENERIC based STM32F4 controller // // ARM Cortex M7 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 6acf915b2..108722e32 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -359,6 +359,8 @@ #include "pins_COHESION3D_REMIX.h" #elif MB(COHESION3D_MINI) #include "pins_COHESION3D_MINI.h" +#elif MB(STM32F4) + #include "pins_STM32F4.h" #else #error "Unknown MOTHERBOARD value set in Configuration.h" #endif diff --git a/Marlin/src/pins/pins_STM32F4.h b/Marlin/src/pins/pins_STM32F4.h new file mode 100644 index 000000000..d5d15687c --- /dev/null +++ b/Marlin/src/pins/pins_STM32F4.h @@ -0,0 +1,204 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#if !defined(STM32F4) + #error "Oops! Make sure you have an STM32F4 board selected from the 'Tools -> Boards' menu." +#endif + +#define DEFAULT_MACHINE_NAME "STM32F407VET6" +#define BOARD_NAME "Marlin for STM32" + +// #define I2C_EEPROM + +// #define LARGE_FLASH true + +#define E2END 0xFFF // EEPROM end address (4kB) + +// Ignore temp readings during develpment. +// #define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE + +#if E_STEPPERS > 2 || HOTENDS > 2 + #error "STM32F4 supports up to 2 hotends / E-steppers." +#endif + +#define PORTA 0 +#define PORTB 1 +#define PORTC 2 +#define PORTD 3 +#define PORTE 4 + +#define _STM32_PIN(_PORT,_PIN) ((_PORT * 16) + _PIN) + +// +// Limit Switches +// +#define X_MIN_PIN _STM32_PIN(PORTE, 0) +#define X_MAX_PIN -1 +#define Y_MIN_PIN _STM32_PIN(PORTE, 1) +#define Y_MAX_PIN -1 +#define Z_MIN_PIN _STM32_PIN(PORTE, 14) +#define Z_MAX_PIN -1 + +// +// Z Probe (when not Z_MIN_PIN) +// + +// #ifndef Z_MIN_PROBE_PIN +// #define Z_MIN_PROBE_PIN _STM32_PIN(PORTA, 4) +// #endif + +// +// Steppers +// + +#define X_STEP_PIN _STM32_PIN(PORTD, 3) +#define X_DIR_PIN _STM32_PIN(PORTD, 2) +#define X_ENABLE_PIN _STM32_PIN(PORTD, 0) +// #ifndef X_CS_PIN +// #define X_CS_PIN _STM32_PIN(PORTD, 1) +// #endif + +#define Y_STEP_PIN _STM32_PIN(PORTE, 11) +#define Y_DIR_PIN _STM32_PIN(PORTE, 10) +#define Y_ENABLE_PIN _STM32_PIN(PORTE, 13) +// #ifndef Y_CS_PIN +// #define Y_CS_PIN _STM32_PIN(PORTE, 12) +// #endif + +#define Z_STEP_PIN _STM32_PIN(PORTD, 6) +#define Z_DIR_PIN _STM32_PIN(PORTD, 7) +#define Z_ENABLE_PIN _STM32_PIN(PORTD, 4) +// #ifndef Z_CS_PIN +// #define Z_CS_PIN _STM32_PIN(PORTD, 5) +// #endif + +#define E0_STEP_PIN _STM32_PIN(PORTB, 5) +#define E0_DIR_PIN _STM32_PIN(PORTB, 6) +#define E0_ENABLE_PIN _STM32_PIN(PORTB, 3) +// #ifndef E0_CS_PIN +// #define E0_CS_PIN _STM32_PIN(PORTB, 4) +// #endif + +#define E1_STEP_PIN _STM32_PIN(PORTE, 4) +#define E1_DIR_PIN _STM32_PIN(PORTE, 2) +#define E1_ENABLE_PIN _STM32_PIN(PORTE, 3) +// #ifndef E1_CS_PIN +// #define E1_CS_PIN _STM32_PIN(PORTE, 5) +// #endif + +#define SCK_PIN _STM32_PIN(PORTA, 5) +#define MISO_PIN _STM32_PIN(PORTA, 6) +#define MOSI_PIN _STM32_PIN(PORTA, 7) + +// +// Temperature Sensors +// + +#define TEMP_0_PIN _STM32_PIN(PORTC, 0) // Analog Input +#define TEMP_1_PIN _STM32_PIN(PORTC, 1) // Analog Input +#define TEMP_BED_PIN _STM32_PIN(PORTC, 2) // Analog Input + +// +// Heaters / Fans +// + +#define HEATER_0_PIN _STM32_PIN(PORTA, 1) +#define HEATER_1_PIN _STM32_PIN(PORTA, 2) +#define HEATER_BED_PIN _STM32_PIN(PORTA, 0) + +#define FAN_PIN _STM32_PIN(PORTC, 6) +#define FAN1_PIN _STM32_PIN(PORTC, 7) +#define FAN2_PIN _STM32_PIN(PORTC, 8) + +#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN // Use this by NOT overriding E0_AUTO_FAN_PIN + +// +// Misc. Functions +// + +//#define CASE_LIGHT_PIN_CI _STM32_PIN(PORTF, 13) +//#define CASE_LIGHT_PIN_DO _STM32_PIN(PORTF, 14) +//#define NEOPIXEL_PIN _STM32_PIN(PORTF, 13) + +// +// Prusa i3 MK2 Multi Material Multiplexer Support +// + +// #define E_MUX0_PIN _STM32_PIN(PORTG, 3) +// #define E_MUX1_PIN _STM32_PIN(PORTG, 4) + +// +// Servos +// + +// #define SERVO0_PIN _STM32_PIN(PORTE, 13) +// #define SERVO1_PIN _STM32_PIN(PORTE, 14) + + +#define SDSS _STM32_PIN(PORTE, 7) +#define SS_PIN _STM32_PIN(PORTE, 7) +#define LED_PIN _STM32_PIN(PORTB, 7) //Alive +#define PS_ON_PIN _STM32_PIN(PORTA, 10) +#define KILL_PIN _STM32_PIN(PORTA, 8) +#define PWR_LOSS _STM32_PIN(PORTA, 4) //Power loss / nAC_FAULT + +// +// LCD / Controller +// + +#define SD_DETECT_PIN _STM32_PIN(PORTA, 15) +#define BEEPER_PIN _STM32_PIN(PORTC, 9) +#define LCD_PINS_RS _STM32_PIN(PORTE, 9) +#define LCD_PINS_ENABLE _STM32_PIN(PORTE, 8) +#define LCD_PINS_D4 _STM32_PIN(PORTB, 12) +#define LCD_PINS_D5 _STM32_PIN(PORTB, 13) +#define LCD_PINS_D6 _STM32_PIN(PORTB, 14) +#define LCD_PINS_D7 _STM32_PIN(PORTB, 15) +#define BTN_EN1 _STM32_PIN(PORTC, 4) +#define BTN_EN2 _STM32_PIN(PORTC, 5) +#define BTN_ENC _STM32_PIN(PORTC, 3) + +// +// Filament runout +// + +#define FIL_RUNOUT_PIN _STM32_PIN(PORTA, 3) + +// +// ST7920 Delays +// + +#define STM_NOP __asm__("nop\n\t") +#define STM_DELAY_SHORT { STM_NOP; STM_NOP; STM_NOP; STM_NOP; } +#define STM_DELAY_LONG { STM_DELAY_SHORT; STM_DELAY_SHORT; STM_NOP; STM_NOP; } + +#ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 { STM_DELAY_SHORT; STM_DELAY_SHORT; } +#endif + +#ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 { STM_DELAY_SHORT; } +#endif + +#ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 { STM_DELAY_LONG; STM_DELAY_LONG; STM_DELAY_LONG; STM_DELAY_LONG; STM_DELAY_LONG; STM_DELAY_LONG; } +#endif diff --git a/platformio.ini b/platformio.ini index db7f4e759..09c55d27e 100644 --- a/platformio.ini +++ b/platformio.ini @@ -242,6 +242,16 @@ lib_ldf_mode = 1 src_filter = ${common.default_src_filter} monitor_baud = 250000 +[env:STM32F4] +platform = ststm32 +framework = arduino +board = disco_f407vg +build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB +lib_deps = ${common.lib_deps} +lib_ignore = Adafruit NeoPixel, c1921b4, TMC2130Stepper +src_filter = ${common.default_src_filter} +monitor_baud = 250000 + # # Teensy++ 2.0 #