From 3a9ad9f2b1f56d14c6ff82a96e18319e64bd4016 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 27 Oct 2018 15:55:06 -0500 Subject: [PATCH] Move Configuration Menu to its own file --- Marlin/src/lcd/menu/menu.cpp | 409 +-------------------- Marlin/src/lcd/menu/menu_configuration.cpp | 371 +++++++++++++++++++ 2 files changed, 385 insertions(+), 395 deletions(-) create mode 100644 Marlin/src/lcd/menu/menu_configuration.cpp diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp index c139bf987..828e0f320 100644 --- a/Marlin/src/lcd/menu/menu.cpp +++ b/Marlin/src/lcd/menu/menu.cpp @@ -30,7 +30,6 @@ #include "../../sd/cardreader.h" #include "../../module/temperature.h" #include "../../module/planner.h" -#include "../../module/stepper.h" #include "../../module/motion.h" #include "../../module/probe.h" #include "../../module/printcounter.h" @@ -66,10 +65,6 @@ #include "../../feature/leds/leds.h" #endif -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #include "../../feature/runout.h" -#endif - //////////////////////////////////////////// ///////////// Global Variables ///////////// //////////////////////////////////////////// @@ -256,13 +251,6 @@ void menu_action_setting_edit_callback_bool(PGM_P pstr, bool* ptr, screenFunc_t ///////////////// Menu Tree //////////////// //////////////////////////////////////////// -void menu_advanced_settings(); - -#if DISABLED(SLIM_LCD_MENUS) - void menu_preheat_material1_settings(); - void menu_preheat_material2_settings(); -#endif - #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE) void menu_advanced_filament(); #endif @@ -283,22 +271,6 @@ void menu_advanced_settings(); #endif #endif -#if ENABLED(DAC_STEPPER_CURRENT) - void dac_driver_commit(); - void dac_driver_getValues(); - void menu_dac(); - void lcd_dac_write_eeprom(); -#endif - -#if ENABLED(FWRETRACT) - #include "../../feature/fwretract.h" - void menu_config_retract(); -#endif - -#if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION) - void menu_delta_calibrate(); -#endif - #if ENABLED(MESH_BED_LEVELING) && ENABLED(LCD_BED_LEVELING) #include "../../feature/bedlevel/mbl/mesh_bed_leveling.h" #endif @@ -558,127 +530,6 @@ void line_to_z(const float &z) { #endif // POWER_LOSS_RECOVERY -#if EXTRUDERS > 1 - void menu_tool_change() { - START_MENU(); - MENU_BACK(MSG_MAIN); - #if ENABLED(SINGLENOZZLE) - MENU_ITEM_EDIT(float3, MSG_FILAMENT_SWAP_LENGTH, &toolchange_settings.swap_length, 0, 200); - MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_RETRACT_SPD, &toolchange_settings.retract_speed, 10, 5400); - MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_PRIME_SPD, &toolchange_settings.prime_speed, 10, 5400); - #endif - MENU_ITEM_EDIT(float3, MSG_TOOL_CHANGE_ZLIFT, &toolchange_settings.z_raise, 0, 10); - END_MENU(); - } -#endif - -#if ENABLED(MENU_ITEM_CASE_LIGHT) - - #include "../../feature/caselight.h" - - void menu_case_light() { - START_MENU(); - MENU_BACK(MSG_MAIN); - MENU_ITEM_EDIT_CALLBACK(int8, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true); - MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); - END_MENU(); - } -#endif // MENU_ITEM_CASE_LIGHT - -#if ENABLED(BLTOUCH) - - /** - * - * "BLTouch" submenu - * - */ - static void menu_bltouch() { - START_MENU(); - MENU_BACK(MSG_MAIN); - MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET))); - MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST))); - MENU_ITEM(gcode, MSG_BLTOUCH_DEPLOY, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_DEPLOY))); - MENU_ITEM(gcode, MSG_BLTOUCH_STOW, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_STOW))); - END_MENU(); - } - -#endif // BLTOUCH - -#if ENABLED(LCD_PROGRESS_BAR_TEST) - - static void progress_bar_test() { - static int8_t bar_percent = 0; - if (use_click()) { - lcd_goto_previous_menu(); - lcd_set_custom_characters(CHARSET_MENU); - return; - } - bar_percent += (int8_t)encoderPosition; - bar_percent = constrain(bar_percent, 0, 100); - encoderPosition = 0; - lcd_implementation_drawmenu_static(0, PSTR(MSG_PROGRESS_BAR_TEST), true, true); - lcd_moveto((LCD_WIDTH) / 2 - 2, LCD_HEIGHT - 2); - lcd_put_u8str(int(bar_percent)); lcd_put_wchar('%'); - lcd_moveto(0, LCD_HEIGHT - 1); lcd_draw_progress_bar(bar_percent); - } - - void _progress_bar_test() { - lcd_goto_screen(progress_bar_test); - lcd_set_custom_characters(); - } - -#endif // LCD_PROGRESS_BAR_TEST - -#if HAS_DEBUG_MENU - - void menu_debug() { - START_MENU(); - - MENU_BACK(MSG_MAIN); - - #if ENABLED(LCD_PROGRESS_BAR_TEST) - MENU_ITEM(submenu, MSG_PROGRESS_BAR_TEST, _progress_bar_test); - #endif - - END_MENU(); - } - -#endif // HAS_DEBUG_MENU - -/** - * IDEX submenu - */ -#if ENABLED(DUAL_X_CARRIAGE) - static void _recalc_IDEX_settings() { - if (active_extruder) { // For the 2nd extruder re-home so the next tool-change gets the new offsets. - enqueue_and_echo_commands_P(PSTR("G28")); // In future, we can babystep the 2nd extruder (if active), making homing unnecessary. - active_extruder = 0; - } - } - - static void menu_IDEX() { - START_MENU(); - MENU_BACK(MSG_MAIN); - - MENU_ITEM(gcode, MSG_IDEX_MODE_AUTOPARK, PSTR("M605 S1\nG28 X\nG1 X100")); - const bool need_g28 = !(TEST(axis_known_position, Y_AXIS) && TEST(axis_known_position, Z_AXIS)); - MENU_ITEM(gcode, MSG_IDEX_MODE_DUPLICATE, need_g28 - ? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100") // If Y or Z is not homed, do a full G28 first - : PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100") - ); - //MENU_ITEM(gcode, MSG_IDEX_MODE_SCALED_COPY, need_g28 - // ? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200") // If Y or Z is not homed, do a full G28 first - // : PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200") - //); - MENU_ITEM(gcode, MSG_IDEX_MODE_FULL_CTRL, PSTR("M605 S0\nG28 X")); - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_X_OFFSET , &hotend_offset[X_AXIS][1], MIN(X2_HOME_POS, X2_MAX_POS) - 25.0, MAX(X2_HOME_POS, X2_MAX_POS) + 25.0, _recalc_IDEX_settings); - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_Y_OFFSET , &hotend_offset[Y_AXIS][1], -10.0, 10.0, _recalc_IDEX_settings); - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_Z_OFFSET , &hotend_offset[Z_AXIS][1], -10.0, 10.0, _recalc_IDEX_settings); - MENU_ITEM(gcode, MSG_IDEX_SAVE_OFFSETS, PSTR("M500")); - END_MENU(); - } -#endif // DUAL_X_CARRIAGE - #if ENABLED(CUSTOM_USER_MENUS) #ifdef USER_SCRIPT_DONE @@ -883,55 +734,6 @@ void watch_temp_callback_bed() { #endif } -/** - * - * "Driver current control" submenu items - * - */ -#if ENABLED(DAC_STEPPER_CURRENT) - - #include "../../feature/dac/stepper_dac.h" //was dac_mcp4728.h MarlinMain uses stepper dac for the m-codes - uint8_t driverPercent[XYZE]; - - void dac_driver_getValues() { LOOP_XYZE(i) driverPercent[i] = dac_current_get_percent((AxisEnum)i); } - - void dac_driver_commit() { dac_current_set_percents(driverPercent); } - - void dac_driver_eeprom_write() { dac_commit_eeprom(); } - - void menu_dac() { - dac_driver_getValues(); - START_MENU(); - MENU_BACK(MSG_CONTROL); - MENU_ITEM_EDIT_CALLBACK(int8, MSG_X " " MSG_DAC_PERCENT, &driverPercent[X_AXIS], 0, 100, dac_driver_commit); - MENU_ITEM_EDIT_CALLBACK(int8, MSG_Y " " MSG_DAC_PERCENT, &driverPercent[Y_AXIS], 0, 100, dac_driver_commit); - MENU_ITEM_EDIT_CALLBACK(int8, MSG_Z " " MSG_DAC_PERCENT, &driverPercent[Z_AXIS], 0, 100, dac_driver_commit); - MENU_ITEM_EDIT_CALLBACK(int8, MSG_E " " MSG_DAC_PERCENT, &driverPercent[E_AXIS], 0, 100, dac_driver_commit); - MENU_ITEM(function, MSG_DAC_EEPROM_WRITE, dac_driver_eeprom_write); - END_MENU(); - } - -#endif // DAC_STEPPER_CURRENT - -#if HAS_MOTOR_CURRENT_PWM - - void menu_pwm() { - START_MENU(); - MENU_BACK(MSG_CONTROL); - #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) - MENU_ITEM_EDIT_CALLBACK(long5, MSG_X MSG_Y, &stepper.motor_current_setting[0], 100, 2000, Stepper::refresh_motor_power); - #endif - #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) - MENU_ITEM_EDIT_CALLBACK(long5, MSG_Z, &stepper.motor_current_setting[1], 100, 2000, Stepper::refresh_motor_power); - #endif - #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) - MENU_ITEM_EDIT_CALLBACK(long5, MSG_E, &stepper.motor_current_setting[2], 100, 2000, Stepper::refresh_motor_power); - #endif - END_MENU(); - } - -#endif // HAS_MOTOR_CURRENT_PWM - /** * * "Temperature" submenu items @@ -1204,8 +1006,20 @@ void lcd_cooldown() { #endif #if ENABLED(EEPROM_SETTINGS) - static void lcd_store_settings() { lcd_completion_feedback(settings.save()); } - static void lcd_load_settings() { lcd_completion_feedback(settings.load()); } + void lcd_store_settings() { lcd_completion_feedback(settings.save()); } + void lcd_load_settings() { lcd_completion_feedback(settings.load()); } + #if DISABLED(SLIM_LCD_MENUS) + static void lcd_init_eeprom() { + lcd_completion_feedback(settings.init_eeprom()); + lcd_goto_previous_menu(); + } + static void lcd_init_eeprom_confirm() { + START_MENU(); + MENU_BACK(MSG_ADVANCED_SETTINGS); + MENU_ITEM(function, MSG_INIT_EEPROM, lcd_init_eeprom); + END_MENU(); + } + #endif #endif void _lcd_draw_homing() { @@ -2597,120 +2411,6 @@ void menu_move() { END_MENU(); } -/** - * - * "Configuration" submenu - * - */ - -#if HAS_LCD_CONTRAST - void lcd_callback_set_contrast() { set_lcd_contrast(lcd_contrast); } -#endif - -static void lcd_factory_settings() { - settings.reset(); - lcd_completion_feedback(); -} - -#if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS) - - static void lcd_init_eeprom() { - lcd_completion_feedback(settings.init_eeprom()); - lcd_goto_previous_menu(); - } - - static void lcd_init_eeprom_confirm() { - START_MENU(); - MENU_BACK(MSG_ADVANCED_SETTINGS); - MENU_ITEM(function, MSG_INIT_EEPROM, lcd_init_eeprom); - END_MENU(); - } - -#endif - -void menu_configuration() { - START_MENU(); - MENU_BACK(MSG_MAIN); - - // - // Debug Menu when certain options are enabled - // - #if HAS_DEBUG_MENU - MENU_ITEM(submenu, MSG_DEBUG_MENU, menu_debug); - #endif - - MENU_ITEM(submenu, MSG_ADVANCED_SETTINGS, menu_advanced_settings); - - const bool busy = printer_busy(); - if (!busy) { - // - // Delta Calibration - // - #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION) - MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, menu_delta_calibrate); - #endif - - #if ENABLED(DUAL_X_CARRIAGE) - MENU_ITEM(submenu, MSG_IDEX_MENU, menu_IDEX); - #endif - - #if ENABLED(BLTOUCH) - MENU_ITEM(submenu, MSG_BLTOUCH, menu_bltouch); - #endif - } - - // - // Set single nozzle filament retract and prime length - // - #if EXTRUDERS > 1 - MENU_ITEM(submenu, MSG_TOOL_CHANGE, menu_tool_change); - #endif - - // - // Set Case light on/off/brightness - // - #if ENABLED(MENU_ITEM_CASE_LIGHT) - if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) - MENU_ITEM(submenu, MSG_CASE_LIGHT, menu_case_light); - else - MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); - #endif - - #if HAS_LCD_CONTRAST - MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true); - #endif - #if ENABLED(FWRETRACT) - MENU_ITEM(submenu, MSG_RETRACT, menu_config_retract); - #endif - #if ENABLED(DAC_STEPPER_CURRENT) - MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, menu_dac); - #endif - #if HAS_MOTOR_CURRENT_PWM - MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, menu_pwm); - #endif - - #if ENABLED(FILAMENT_RUNOUT_SENSOR) - MENU_ITEM_EDIT(bool, MSG_RUNOUT_SENSOR_ENABLE, &runout.enabled); - #endif - - #if DISABLED(SLIM_LCD_MENUS) - // Preheat configurations - MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, menu_preheat_material1_settings); - MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, menu_preheat_material2_settings); - #endif - - #if ENABLED(EEPROM_SETTINGS) - MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); - if (!busy) - MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings); - #endif - - if (!busy) - MENU_ITEM(function, MSG_RESTORE_FAILSAFE, lcd_factory_settings); - - END_MENU(); -} - /** * * "Temperature" submenu @@ -2962,55 +2662,6 @@ void menu_advanced_temperature() { #if DISABLED(SLIM_LCD_MENUS) - void _menu_configuration_preheat_settings(const uint8_t material) { - #if HOTENDS > 5 - #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP, HEATER_5_MINTEMP) - #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP) - #elif HOTENDS > 4 - #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP) - #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP) - #elif HOTENDS > 3 - #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP) - #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP) - #elif HOTENDS > 2 - #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP) - #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP) - #elif HOTENDS > 1 - #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP) - #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP) - #else - #define MINTEMP_ALL HEATER_0_MINTEMP - #define MAXTEMP_ALL HEATER_0_MAXTEMP - #endif - START_MENU(); - MENU_BACK(MSG_CONFIGURATION); - MENU_ITEM_EDIT(int8, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255); - #if HAS_TEMP_HOTEND - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15); - #endif - #if HAS_HEATED_BED - MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15); - #endif - #if ENABLED(EEPROM_SETTINGS) - MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); - #endif - END_MENU(); - } - - /** - * - * "Temperature" > "Preheat Material 1 conf" submenu - * - */ - void menu_preheat_material1_settings() { _menu_configuration_preheat_settings(0); } - - /** - * - * "Temperature" > "Preheat Material 2 conf" submenu - * - */ - void menu_preheat_material2_settings() { _menu_configuration_preheat_settings(1); } - void _reset_acceleration_rates() { planner.reset_acceleration_rates(); } #if ENABLED(DISTINCT_E_FACTORS) void _reset_e_acceleration_rate(const uint8_t e) { if (e == active_extruder) _reset_acceleration_rates(); } @@ -3423,38 +3074,6 @@ void menu_advanced_settings() { } #endif // !NO_VOLUMETRICS || ADVANCED_PAUSE_FEATURE -/** - * - * "Configuration" > "Retract" submenu - * - */ -#if ENABLED(FWRETRACT) - - void menu_config_retract() { - START_MENU(); - MENU_BACK(MSG_CONTROL); - #if ENABLED(FWRETRACT_AUTORETRACT) - MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract); - #endif - MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT, &fwretract.settings.retract_length, 0, 100); - #if EXTRUDERS > 1 - MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.settings.swap_retract_length, 0, 100); - #endif - MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &fwretract.settings.retract_feedrate_mm_s, 1, 999); - MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_ZHOP, &fwretract.settings.retract_zraise, 0, 999); - MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.settings.retract_recover_length, -100, 100); - #if EXTRUDERS > 1 - MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.settings.swap_retract_recover_length, -100, 100); - #endif - MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.settings.retract_recover_feedrate_mm_s, 1, 999); - #if EXTRUDERS > 1 - MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVER_SWAPF, &fwretract.settings.swap_retract_recover_feedrate_mm_s, 1, 999); - #endif - END_MENU(); - } - -#endif // FWRETRACT - #if ENABLED(SDSUPPORT) #if !PIN_EXISTS(SD_DETECT) diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp new file mode 100644 index 000000000..2fbecf7b5 --- /dev/null +++ b/Marlin/src/lcd/menu/menu_configuration.cpp @@ -0,0 +1,371 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// +// Configuration Menu +// + +#include "../../inc/MarlinConfigPre.h" + +#if HAS_LCD_MENU + +#include "menu.h" + +#include "../../module/configuration_store.h" + +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #include "../../feature/runout.h" +#endif + +void menu_advanced_settings(); +void menu_delta_calibrate(); + +#if HAS_LCD_CONTRAST + void lcd_callback_set_contrast() { set_lcd_contrast(lcd_contrast); } +#endif + +static void lcd_factory_settings() { + settings.reset(); + lcd_completion_feedback(); +} + +#if ENABLED(LCD_PROGRESS_BAR_TEST) + + static void progress_bar_test() { + static int8_t bar_percent = 0; + if (use_click()) { + lcd_goto_previous_menu(); + lcd_set_custom_characters(CHARSET_MENU); + return; + } + bar_percent += (int8_t)encoderPosition; + bar_percent = constrain(bar_percent, 0, 100); + encoderPosition = 0; + lcd_implementation_drawmenu_static(0, PSTR(MSG_PROGRESS_BAR_TEST), true, true); + lcd_moveto((LCD_WIDTH) / 2 - 2, LCD_HEIGHT - 2); + lcd_put_u8str(int(bar_percent)); lcd_put_wchar('%'); + lcd_moveto(0, LCD_HEIGHT - 1); lcd_draw_progress_bar(bar_percent); + } + + void _progress_bar_test() { + lcd_goto_screen(progress_bar_test); + lcd_set_custom_characters(); + } + +#endif // LCD_PROGRESS_BAR_TEST + +#if HAS_DEBUG_MENU + + void menu_debug() { + START_MENU(); + + MENU_BACK(MSG_MAIN); + + #if ENABLED(LCD_PROGRESS_BAR_TEST) + MENU_ITEM(submenu, MSG_PROGRESS_BAR_TEST, _progress_bar_test); + #endif + + END_MENU(); + } + +#endif + +#if EXTRUDERS > 1 + + #include "../../module/tool_change.h" + + void menu_tool_change() { + START_MENU(); + MENU_BACK(MSG_MAIN); + #if ENABLED(SINGLENOZZLE) + MENU_ITEM_EDIT(float3, MSG_FILAMENT_SWAP_LENGTH, &toolchange_settings.swap_length, 0, 200); + MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_RETRACT_SPD, &toolchange_settings.retract_speed, 10, 5400); + MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_PRIME_SPD, &toolchange_settings.prime_speed, 10, 5400); + #endif + MENU_ITEM_EDIT(float3, MSG_TOOL_CHANGE_ZLIFT, &toolchange_settings.z_raise, 0, 10); + END_MENU(); + } + +#endif + +#if ENABLED(DUAL_X_CARRIAGE) + + #include "../../module/motion.h" + #include "../../gcode/queue.h" + + void _recalc_IDEX_settings() { + if (active_extruder) { // For the 2nd extruder re-home so the next tool-change gets the new offsets. + enqueue_and_echo_commands_P(PSTR("G28")); // In future, we can babystep the 2nd extruder (if active), making homing unnecessary. + active_extruder = 0; + } + } + + void menu_IDEX() { + START_MENU(); + MENU_BACK(MSG_MAIN); + + MENU_ITEM(gcode, MSG_IDEX_MODE_AUTOPARK, PSTR("M605 S1\nG28 X\nG1 X100")); + const bool need_g28 = !(TEST(axis_known_position, Y_AXIS) && TEST(axis_known_position, Z_AXIS)); + MENU_ITEM(gcode, MSG_IDEX_MODE_DUPLICATE, need_g28 + ? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100") // If Y or Z is not homed, do a full G28 first + : PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100") + ); + //MENU_ITEM(gcode, MSG_IDEX_MODE_SCALED_COPY, need_g28 + // ? PSTR("M605 S1\nT0\nG28\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200") // If Y or Z is not homed, do a full G28 first + // : PSTR("M605 S1\nT0\nM605 S2 X200\nG28 X\nG1 X100\nM605 S3 X200") + //); + MENU_ITEM(gcode, MSG_IDEX_MODE_FULL_CTRL, PSTR("M605 S0\nG28 X")); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_X_OFFSET , &hotend_offset[X_AXIS][1], MIN(X2_HOME_POS, X2_MAX_POS) - 25.0, MAX(X2_HOME_POS, X2_MAX_POS) + 25.0, _recalc_IDEX_settings); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_Y_OFFSET , &hotend_offset[Y_AXIS][1], -10.0, 10.0, _recalc_IDEX_settings); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_IDEX_Z_OFFSET , &hotend_offset[Z_AXIS][1], -10.0, 10.0, _recalc_IDEX_settings); + MENU_ITEM(gcode, MSG_IDEX_SAVE_OFFSETS, PSTR("M500")); + END_MENU(); + } + +#endif + +#if ENABLED(BLTOUCH) + + void menu_bltouch() { + START_MENU(); + MENU_BACK(MSG_MAIN); + MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET))); + MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST))); + MENU_ITEM(gcode, MSG_BLTOUCH_DEPLOY, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_DEPLOY))); + MENU_ITEM(gcode, MSG_BLTOUCH_STOW, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_STOW))); + END_MENU(); + } + +#endif + +#if ENABLED(MENU_ITEM_CASE_LIGHT) + + #include "../../feature/caselight.h" + + void menu_case_light() { + START_MENU(); + MENU_BACK(MSG_MAIN); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true); + MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); + END_MENU(); + } + +#endif + +#if ENABLED(FWRETRACT) + + #include "../../feature/fwretract.h" + + void menu_config_retract() { + START_MENU(); + MENU_BACK(MSG_CONTROL); + #if ENABLED(FWRETRACT_AUTORETRACT) + MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract); + #endif + MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT, &fwretract.settings.retract_length, 0, 100); + #if EXTRUDERS > 1 + MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.settings.swap_retract_length, 0, 100); + #endif + MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &fwretract.settings.retract_feedrate_mm_s, 1, 999); + MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_ZHOP, &fwretract.settings.retract_zraise, 0, 999); + MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.settings.retract_recover_length, -100, 100); + #if EXTRUDERS > 1 + MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.settings.swap_retract_recover_length, -100, 100); + #endif + MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.settings.retract_recover_feedrate_mm_s, 1, 999); + #if EXTRUDERS > 1 + MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVER_SWAPF, &fwretract.settings.swap_retract_recover_feedrate_mm_s, 1, 999); + #endif + END_MENU(); + } + +#endif + +#if ENABLED(DAC_STEPPER_CURRENT) + + #include "../../feature/dac/stepper_dac.h" + + uint8_t driverPercent[XYZE]; + inline void dac_driver_getValues() { LOOP_XYZE(i) driverPercent[i] = dac_current_get_percent((AxisEnum)i); } + static void dac_driver_commit() { dac_current_set_percents(driverPercent); } + + void menu_dac() { + dac_driver_getValues(); + START_MENU(); + MENU_BACK(MSG_CONTROL); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_X " " MSG_DAC_PERCENT, &driverPercent[X_AXIS], 0, 100, dac_driver_commit); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_Y " " MSG_DAC_PERCENT, &driverPercent[Y_AXIS], 0, 100, dac_driver_commit); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_Z " " MSG_DAC_PERCENT, &driverPercent[Z_AXIS], 0, 100, dac_driver_commit); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_E " " MSG_DAC_PERCENT, &driverPercent[E_AXIS], 0, 100, dac_driver_commit); + MENU_ITEM(function, MSG_DAC_EEPROM_WRITE, dac_commit_eeprom); + END_MENU(); + } + +#endif + +#if HAS_MOTOR_CURRENT_PWM + + #include "../../module/stepper.h" + + void menu_pwm() { + START_MENU(); + MENU_BACK(MSG_CONTROL); + #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) + MENU_ITEM_EDIT_CALLBACK(long5, MSG_X MSG_Y, &stepper.motor_current_setting[0], 100, 2000, stepper.refresh_motor_power); + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) + MENU_ITEM_EDIT_CALLBACK(long5, MSG_Z, &stepper.motor_current_setting[1], 100, 2000, stepper.refresh_motor_power); + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) + MENU_ITEM_EDIT_CALLBACK(long5, MSG_E, &stepper.motor_current_setting[2], 100, 2000, stepper.refresh_motor_power); + #endif + END_MENU(); + } + +#endif + +#if DISABLED(SLIM_LCD_MENUS) + + void _menu_configuration_preheat_settings(const uint8_t material) { + #if HOTENDS > 5 + #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP, HEATER_5_MINTEMP) + #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP) + #elif HOTENDS > 4 + #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP) + #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP) + #elif HOTENDS > 3 + #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP) + #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP) + #elif HOTENDS > 2 + #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP) + #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP) + #elif HOTENDS > 1 + #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP) + #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP) + #else + #define MINTEMP_ALL HEATER_0_MINTEMP + #define MAXTEMP_ALL HEATER_0_MAXTEMP + #endif + START_MENU(); + MENU_BACK(MSG_CONFIGURATION); + MENU_ITEM_EDIT(int8, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255); + #if HAS_TEMP_HOTEND + MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15); + #endif + #if HAS_HEATED_BED + MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15); + #endif + #if ENABLED(EEPROM_SETTINGS) + MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); + #endif + END_MENU(); + } + + void menu_preheat_material1_settings() { _menu_configuration_preheat_settings(0); } + void menu_preheat_material2_settings() { _menu_configuration_preheat_settings(1); } + +#endif + +void menu_configuration() { + START_MENU(); + MENU_BACK(MSG_MAIN); + + // + // Debug Menu when certain options are enabled + // + #if HAS_DEBUG_MENU + MENU_ITEM(submenu, MSG_DEBUG_MENU, menu_debug); + #endif + + MENU_ITEM(submenu, MSG_ADVANCED_SETTINGS, menu_advanced_settings); + + const bool busy = printer_busy(); + if (!busy) { + // + // Delta Calibration + // + #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION) + MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, menu_delta_calibrate); + #endif + + #if ENABLED(DUAL_X_CARRIAGE) + MENU_ITEM(submenu, MSG_IDEX_MENU, menu_IDEX); + #endif + + #if ENABLED(BLTOUCH) + MENU_ITEM(submenu, MSG_BLTOUCH, menu_bltouch); + #endif + } + + // + // Set single nozzle filament retract and prime length + // + #if EXTRUDERS > 1 + MENU_ITEM(submenu, MSG_TOOL_CHANGE, menu_tool_change); + #endif + + // + // Set Case light on/off/brightness + // + #if ENABLED(MENU_ITEM_CASE_LIGHT) + if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) + MENU_ITEM(submenu, MSG_CASE_LIGHT, menu_case_light); + else + MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); + #endif + + #if HAS_LCD_CONTRAST + MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true); + #endif + #if ENABLED(FWRETRACT) + MENU_ITEM(submenu, MSG_RETRACT, menu_config_retract); + #endif + #if ENABLED(DAC_STEPPER_CURRENT) + MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, menu_dac); + #endif + #if HAS_MOTOR_CURRENT_PWM + MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, menu_pwm); + #endif + + #if ENABLED(FILAMENT_RUNOUT_SENSOR) + MENU_ITEM_EDIT(bool, MSG_RUNOUT_SENSOR_ENABLE, &runout.enabled); + #endif + + #if DISABLED(SLIM_LCD_MENUS) + // Preheat configurations + MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, menu_preheat_material1_settings); + MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, menu_preheat_material2_settings); + #endif + + #if ENABLED(EEPROM_SETTINGS) + MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); + if (!busy) + MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings); + #endif + + if (!busy) + MENU_ITEM(function, MSG_RESTORE_FAILSAFE, lcd_factory_settings); + + END_MENU(); +} + +#endif // HAS_LCD_MENU