diff --git a/Marlin/src/pins/stm32/pins_FYSETC_S6.h b/Marlin/src/pins/stm32/pins_FYSETC_S6.h
index def6406e4..227fe4cd5 100644
--- a/Marlin/src/pins/stm32/pins_FYSETC_S6.h
+++ b/Marlin/src/pins/stm32/pins_FYSETC_S6.h
@@ -39,7 +39,7 @@
//
// EEPROM Emulation
-//
+//
#define FLASH_EEPROM_EMULATION
//#define SRAM_EEPROM_EMULATION
@@ -202,7 +202,7 @@
#define DOGLCD_CS PC12
#define DOGLCD_A0 PD0
#endif
-
+
#endif
#if ENABLED(NEWPANEL)
diff --git a/Marlin/src/pins/stm32/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32/pins_GTM32_REV_B.h
index f3ce8a6c0..fcb510e16 100644
--- a/Marlin/src/pins/stm32/pins_GTM32_REV_B.h
+++ b/Marlin/src/pins/stm32/pins_GTM32_REV_B.h
@@ -1,232 +1,232 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- *
- */
-#pragma once
-
-/**
- * 24 May 2018 - @chepo for STM32F103VET6
- * Schematic: https://github.com/chepo92/Smartto/blob/master/circuit_diagram/Rostock301/Hardware_GTM32_PRO_VB.pdf
- */
-
-#ifndef __STM32F1__
- #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
-#endif
-
-#define BOARD_NAME "GTM32 Pro VB"
-#define DEFAULT_MACHINE_NAME "M201"
-
-//#define DISABLE_DEBUG
-
-//
-// It is required to disable JTAG function because its pins are
-// used as GPIO to drive the Y axis stepper.
-// DO NOT ENABLE!
-//
-#define DISABLE_JTAG
-
-//
-// If you don't need the SWDIO functionality (any more), you may
-// disable SWD here to regain PA13/PA14 pins for other use.
-//
-//#define DISABLE_JTAGSWD
-
-// Ignore temp readings during development.
-//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
-
-// Enable EEPROM Emulation for this board as it doesn't have EEPROM
-#define FLASH_EEPROM_EMULATION
-#define E2END 0xFFF // 4KB
-
-//
-// Limit Switches
-//
-#define X_MIN_PIN PE5 // ENDSTOPS 15,17
-#define X_MAX_PIN PE4 // ENDSTOPS 16,18
-#define Y_MIN_PIN PE3 // ENDSTOPS 9,11
-#define Y_MAX_PIN PE2 // ENDSTOPS 10,12
-#define Z_MIN_PIN PE1 // ENDSTOPS 3,5
-#define Z_MAX_PIN PE0 // ENDSTOPS 4,6
-
-//
-// Steppers
-//
-#define X_STEP_PIN PC6
-#define X_DIR_PIN PD13
-#define X_ENABLE_PIN PA8
-
-#define Y_STEP_PIN PA12
-#define Y_DIR_PIN PA11
-#define Y_ENABLE_PIN PA15
-
-#define Z_STEP_PIN PD6
-#define Z_DIR_PIN PD3
-#define Z_ENABLE_PIN PB3
-
-// Extruder stepper pins
-// NOTE: Numbering here is made according to EXT connector numbers,
-// the FANx_PWM line numbering in the schematics is reverse.
-// That is, E0_*_PIN are the E2_* lines connected to E2_A1 step
-// stick that drives the EXT0 output on the board.
-//
-#define E0_STEP_PIN PC14
-#define E0_DIR_PIN PC13
-#define E0_ENABLE_PIN PC15
-
-#define E1_STEP_PIN PA0
-#define E1_DIR_PIN PB6
-#define E1_ENABLE_PIN PA1
-
-#define E2_STEP_PIN PB2
-#define E2_DIR_PIN PB11
-#define E2_ENABLE_PIN PC4
-
-//
-// Heaters / Fans - INFO: Extruders ports are in reverse order. Pin numbers here differ from schematic. Original firmware assumes heater, fan and temp sensor on port EXT0 PB0, PB9, PC2.
-//
-#define HEATER_0_PIN PB0 // EXT0 port.
-#define HEATER_1_PIN PB5 // EXT1 port
-#define HEATER_2_PIN PB4 // EXT2 port
-#define HEATER_BED_PIN PB1 // CON2X3 hotbed port
-
-//
-// These are FAN PWM pins on EXT0..EXT2 connectors.
-//
-//#define FAN_PIN PB9 // EXT0 port
-#define FAN1_PIN PB8 // EXT1 port
-#define FAN2_PIN PB7 // EXT2 port
-#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan
-
-//
-// Temperature Sensors
-//
-#define TEMP_0_PIN PC2 // EXT0 port
-#define TEMP_1_PIN PC1 // EXT1 port
-#define TEMP_2_PIN PC0 // EXT2 port
-#define TEMP_BED_PIN PC3 // CON2X3 hotbed port
-
-//
-// Misc. Functions
-//
-#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector
-
-//
-// LCD / Controller
-//
-#if HAS_SPI_LCD
-
- #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
-
- //
- // LCD display on J2 FFC40
- // Geeetech's LCD2004A Control Panel is very much like
- // RepRapDiscount Smart Controller, but adds an FFC40 connector
- // connected with a flat wire to J2 connector on the board.
- //
- #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select
- #define LCD_PINS_ENABLE PE14 // SID (MOSI)
- #define LCD_PINS_D4 PD8 // SCK (CLK) clock
- #define LCD_PINS_D5 PD9
- #define LCD_PINS_D6 PD10
- #define LCD_PINS_D7 PE15
-
- #define BTN_EN1 PE8
- #define BTN_EN2 PE9
- #define BTN_ENC PE13
-
- //#define GTM32_PRO_VB_USE_LCD_BEEPER
- #define GTM32_PRO_VB_USE_EXT_SDCARD
-
- #else
- //
- // Serial LCDs can be implemented in ExtUI
- //
- //#define LCD_UART_TX PD8
- //#define LCD_UART_RX PD9
- #endif
-
- #if HAS_GRAPHICAL_LCD
- #ifndef ST7920_DELAY_1
- #define ST7920_DELAY_1 DELAY_NS(96)
- #endif
- #ifndef ST7920_DELAY_2
- #define ST7920_DELAY_2 DELAY_NS(48)
- #endif
- #ifndef ST7920_DELAY_3
- #define ST7920_DELAY_3 DELAY_NS(715)
- #endif
- #endif
-
-#endif // HAS_SPI_LCD
-
-//
-// Beeper
-//
-#ifdef GTM32_PRO_VB_USE_LCD_BEEPER
- // This is pin 32 on J2 FFC40 and pin, goes to the beeper
- // on Geeetech's version of RepRapDiscount Smart Controller
- // (e.g. on Rostock 301)
- #define BEEPER_PIN PE12
-#else
- // This is the beeper on the board itself
- #define BEEPER_PIN PB10
-#endif
-
-/**
- * The on-board TF_CARD_SOCKET microSD card socket has no SD Detect pin wired.
- *
- * The FFC10 (SD_CARD) connector has the same pins as those routed to the FFC40 (J2)
- * connector, which usually go to the SD Card slot on the Geeetech version of the
- * RepRapDiscount Smart Controller. Both connectors have the card detect signal.
- *
- * The on-board SD card and the external card (on either SD_CARD or J2) are two
- * separate devices and can work simultaneously. Unfortunately, Marlin only supports
- * a single SPI Flash device (as of 2019-07-05) so only one is enabled here.
- */
-#if ENABLED(GTM32_PRO_VB_USE_EXT_SDCARD)
- //
- // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector
- //
- #define SS_PIN PB12 / PC11
- #define SCK_PIN PB13 // PC12 // PC1
- #define MOSI_PIN PB15 // PD2 // PD2
- #define MISO_PIN PB14 // PC8
- #define SD_DETECT_PIN PC7
-
-#else
- //
- // Use the on-board card socket labeled TF_CARD_SOCKET
- //
- #define SS_PIN PA4
- #define SCK_PIN PA5
- #define MOSI_PIN PA7
- #define MISO_PIN PA6 // PA6
- #define SD_DETECT_PIN -1 // Card detect is not connected
-#endif
-
-#define SDSS SS_PIN
-
-//
-// ESP WiFi can be soldered to J9 connector which is wired to USART2.
-// Must define WIFISUPPORT in Configuration.h for the printer.
-//
-#define ESP_WIFI_MODULE_COM 2
-#define ESP_WIFI_MODULE_BAUDRATE 115200
-#define ESP_WIFI_MODULE_RESET_PIN -1
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * 24 May 2018 - @chepo for STM32F103VET6
+ * Schematic: https://github.com/chepo92/Smartto/blob/master/circuit_diagram/Rostock301/Hardware_GTM32_PRO_VB.pdf
+ */
+
+#ifndef __STM32F1__
+ #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#endif
+
+#define BOARD_NAME "GTM32 Pro VB"
+#define DEFAULT_MACHINE_NAME "M201"
+
+//#define DISABLE_DEBUG
+
+//
+// It is required to disable JTAG function because its pins are
+// used as GPIO to drive the Y axis stepper.
+// DO NOT ENABLE!
+//
+#define DISABLE_JTAG
+
+//
+// If you don't need the SWDIO functionality (any more), you may
+// disable SWD here to regain PA13/PA14 pins for other use.
+//
+//#define DISABLE_JTAGSWD
+
+// Ignore temp readings during development.
+//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
+
+// Enable EEPROM Emulation for this board as it doesn't have EEPROM
+#define FLASH_EEPROM_EMULATION
+#define E2END 0xFFF // 4KB
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN PE5 // ENDSTOPS 15,17
+#define X_MAX_PIN PE4 // ENDSTOPS 16,18
+#define Y_MIN_PIN PE3 // ENDSTOPS 9,11
+#define Y_MAX_PIN PE2 // ENDSTOPS 10,12
+#define Z_MIN_PIN PE1 // ENDSTOPS 3,5
+#define Z_MAX_PIN PE0 // ENDSTOPS 4,6
+
+//
+// Steppers
+//
+#define X_STEP_PIN PC6
+#define X_DIR_PIN PD13
+#define X_ENABLE_PIN PA8
+
+#define Y_STEP_PIN PA12
+#define Y_DIR_PIN PA11
+#define Y_ENABLE_PIN PA15
+
+#define Z_STEP_PIN PD6
+#define Z_DIR_PIN PD3
+#define Z_ENABLE_PIN PB3
+
+// Extruder stepper pins
+// NOTE: Numbering here is made according to EXT connector numbers,
+// the FANx_PWM line numbering in the schematics is reverse.
+// That is, E0_*_PIN are the E2_* lines connected to E2_A1 step
+// stick that drives the EXT0 output on the board.
+//
+#define E0_STEP_PIN PC14
+#define E0_DIR_PIN PC13
+#define E0_ENABLE_PIN PC15
+
+#define E1_STEP_PIN PA0
+#define E1_DIR_PIN PB6
+#define E1_ENABLE_PIN PA1
+
+#define E2_STEP_PIN PB2
+#define E2_DIR_PIN PB11
+#define E2_ENABLE_PIN PC4
+
+//
+// Heaters / Fans - INFO: Extruders ports are in reverse order. Pin numbers here differ from schematic. Original firmware assumes heater, fan and temp sensor on port EXT0 PB0, PB9, PC2.
+//
+#define HEATER_0_PIN PB0 // EXT0 port.
+#define HEATER_1_PIN PB5 // EXT1 port
+#define HEATER_2_PIN PB4 // EXT2 port
+#define HEATER_BED_PIN PB1 // CON2X3 hotbed port
+
+//
+// These are FAN PWM pins on EXT0..EXT2 connectors.
+//
+//#define FAN_PIN PB9 // EXT0 port
+#define FAN1_PIN PB8 // EXT1 port
+#define FAN2_PIN PB7 // EXT2 port
+#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN PC2 // EXT0 port
+#define TEMP_1_PIN PC1 // EXT1 port
+#define TEMP_2_PIN PC0 // EXT2 port
+#define TEMP_BED_PIN PC3 // CON2X3 hotbed port
+
+//
+// Misc. Functions
+//
+#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector
+
+//
+// LCD / Controller
+//
+#if HAS_SPI_LCD
+
+ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+
+ //
+ // LCD display on J2 FFC40
+ // Geeetech's LCD2004A Control Panel is very much like
+ // RepRapDiscount Smart Controller, but adds an FFC40 connector
+ // connected with a flat wire to J2 connector on the board.
+ //
+ #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select
+ #define LCD_PINS_ENABLE PE14 // SID (MOSI)
+ #define LCD_PINS_D4 PD8 // SCK (CLK) clock
+ #define LCD_PINS_D5 PD9
+ #define LCD_PINS_D6 PD10
+ #define LCD_PINS_D7 PE15
+
+ #define BTN_EN1 PE8
+ #define BTN_EN2 PE9
+ #define BTN_ENC PE13
+
+ //#define GTM32_PRO_VB_USE_LCD_BEEPER
+ #define GTM32_PRO_VB_USE_EXT_SDCARD
+
+ #else
+ //
+ // Serial LCDs can be implemented in ExtUI
+ //
+ //#define LCD_UART_TX PD8
+ //#define LCD_UART_RX PD9
+ #endif
+
+ #if HAS_GRAPHICAL_LCD
+ #ifndef ST7920_DELAY_1
+ #define ST7920_DELAY_1 DELAY_NS(96)
+ #endif
+ #ifndef ST7920_DELAY_2
+ #define ST7920_DELAY_2 DELAY_NS(48)
+ #endif
+ #ifndef ST7920_DELAY_3
+ #define ST7920_DELAY_3 DELAY_NS(715)
+ #endif
+ #endif
+
+#endif // HAS_SPI_LCD
+
+//
+// Beeper
+//
+#ifdef GTM32_PRO_VB_USE_LCD_BEEPER
+ // This is pin 32 on J2 FFC40 and pin, goes to the beeper
+ // on Geeetech's version of RepRapDiscount Smart Controller
+ // (e.g. on Rostock 301)
+ #define BEEPER_PIN PE12
+#else
+ // This is the beeper on the board itself
+ #define BEEPER_PIN PB10
+#endif
+
+/**
+ * The on-board TF_CARD_SOCKET microSD card socket has no SD Detect pin wired.
+ *
+ * The FFC10 (SD_CARD) connector has the same pins as those routed to the FFC40 (J2)
+ * connector, which usually go to the SD Card slot on the Geeetech version of the
+ * RepRapDiscount Smart Controller. Both connectors have the card detect signal.
+ *
+ * The on-board SD card and the external card (on either SD_CARD or J2) are two
+ * separate devices and can work simultaneously. Unfortunately, Marlin only supports
+ * a single SPI Flash device (as of 2019-07-05) so only one is enabled here.
+ */
+#if ENABLED(GTM32_PRO_VB_USE_EXT_SDCARD)
+ //
+ // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector
+ //
+ #define SS_PIN PB12 // PC11
+ #define SCK_PIN PB13 // PC12 // PC1
+ #define MOSI_PIN PB15 // PD2 // PD2
+ #define MISO_PIN PB14 // PC8
+ #define SD_DETECT_PIN PC7
+
+#else
+ //
+ // Use the on-board card socket labeled TF_CARD_SOCKET
+ //
+ #define SS_PIN PA4
+ #define SCK_PIN PA5
+ #define MOSI_PIN PA7
+ #define MISO_PIN PA6 // PA6
+ #define SD_DETECT_PIN -1 // Card detect is not connected
+#endif
+
+#define SDSS SS_PIN
+
+//
+// ESP WiFi can be soldered to J9 connector which is wired to USART2.
+// Must define WIFISUPPORT in Configuration.h for the printer.
+//
+#define ESP_WIFI_MODULE_COM 2
+#define ESP_WIFI_MODULE_BAUDRATE 115200
+#define ESP_WIFI_MODULE_RESET_PIN -1
diff --git a/buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py b/buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py
index 9a5a02e61..de1a5e787 100644
--- a/buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py
+++ b/buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py
@@ -10,7 +10,7 @@ platform = env.PioPlatform()
board = env.BoardConfig()
FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32")
-#FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32@3.10500.190327")
+#FRAMEWORK_DIR = platform.get_package_dir("framework-arduinoststm32@3.10500.190327")
CMSIS_DIR = os.path.join(FRAMEWORK_DIR, "CMSIS", "CMSIS")
assert os.path.isdir(FRAMEWORK_DIR)
assert os.path.isdir(CMSIS_DIR)
@@ -31,7 +31,7 @@ for file_name in os.listdir(source_dir):
full_file_name = os.path.join(source_dir, file_name)
if os.path.isfile(full_file_name):
shutil.copy(full_file_name, variant_dir)
-
+
# Relocate firmware from 0x08000000 to 0x08002000
#env['CPPDEFINES'].remove(("VECT_TAB_ADDR", 134217728))
#env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08010000"))
diff --git a/buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld b/buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld
index 235c432ec..2a61072cb 100644
--- a/buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld
+++ b/buildroot/share/PlatformIO/variants/FYSETC_S6/ldscript.ld
@@ -133,7 +133,7 @@ SECTIONS
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
- .data :
+ .data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
@@ -173,8 +173,6 @@ SECTIONS
. = ALIGN(4);
} >RAM
-
-
/* Remove information from the standard libraries */
/DISCARD/ :
{