diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 3773ad324..dd758724d 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -41,11 +41,6 @@ char lcd_status_message[LCD_WIDTH+1] = WELCOME_MSG; #include "ultralcd_implementation_hitachi_HD44780.h" #endif -/** forward declarations **/ - -void copy_and_scalePID_i(); -void copy_and_scalePID_d(); - /* Different menus */ static void lcd_status_screen(); #ifdef ULTIPANEL @@ -185,9 +180,8 @@ void* editValue; int32_t minEditValue, maxEditValue; menuFunc_t callbackFunc; -// place-holders for Ki and Kd edits, and the extruder # being edited +// place-holders for Ki and Kd edits float raw_Ki, raw_Kd; -int pid_current_extruder; static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool feedback=true) { if (currentMenu != menu) { @@ -811,76 +805,120 @@ static void lcd_control_menu() END_MENU(); } +#ifdef PIDTEMP + // Helpers for editing PID Ki & Kd values + // grab the PID value out of the temp variable; scale it; then update the PID driver + void copy_and_scalePID_i(int e) { + PID_PARAM(Ki, e) = scalePID_i(raw_Ki); + updatePID(); + } + void copy_and_scalePID_d(int e) { + PID_PARAM(Kd, e) = scalePID_d(raw_Kd); + updatePID(); + } + void copy_and_scalePID_i_E1() { copy_and_scalePID_i(0); } + void copy_and_scalePID_d_E1() { copy_and_scalePID_d(0); } + #if EXTRUDERS > 1 + void copy_and_scalePID_i_E2() { copy_and_scalePID_i(1); } + void copy_and_scalePID_d_E2() { copy_and_scalePID_d(1); } + #if EXTRUDERS > 2 + void copy_and_scalePID_i_E3() { copy_and_scalePID_i(2); } + void copy_and_scalePID_d_E3() { copy_and_scalePID_d(2); } + #if EXTRUDERS > 3 + void copy_and_scalePID_i_E4() { copy_and_scalePID_i(3); } + void copy_and_scalePID_d_E5() { copy_and_scalePID_d(3); } + #endif + #endif + #endif +#endif + static void lcd_control_temperature_menu() { START_MENU(); MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); -#if TEMP_SENSOR_0 != 0 - MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); -#endif -#if TEMP_SENSOR_1 != 0 && EXTRUDERS > 1 - MENU_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15); -#endif -#if TEMP_SENSOR_2 != 0 && EXTRUDERS > 2 - MENU_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15); -#endif -#if TEMP_SENSOR_3 != 0 && EXTRUDERS > 3 - MENU_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15); -#endif -#if TEMP_SENSOR_BED != 0 - MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15); -#endif + #if TEMP_SENSOR_0 != 0 + MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); + #endif + #if EXTRUDERS > 1 + #if TEMP_SENSOR_1 != 0 + MENU_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15); + #endif + #if EXTRUDERS > 2 + #if TEMP_SENSOR_2 != 0 + MENU_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15); + #endif + #if EXTRUDERS > 2 + #if TEMP_SENSOR_3 != 0 + MENU_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15); + #endif + #endif + #endif + #endif + #if TEMP_SENSOR_BED != 0 + MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15); + #endif MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255); -#if defined AUTOTEMP && (TEMP_SENSOR_0 != 0) - MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled); - MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15); - MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15); - MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0); -#endif -#ifdef PIDTEMP - // set up temp variables - undo the default scaling - pid_current_extruder = 0; - raw_Ki = unscalePID_i(PID_PARAM(Ki,0)); - raw_Kd = unscalePID_d(PID_PARAM(Kd,0)); - MENU_ITEM_EDIT(float52, MSG_PID_P, &PID_PARAM(Kp,0), 1, 9990); - // i is typically a small value so allows values below 1 - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i); - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d); + #if defined AUTOTEMP && (TEMP_SENSOR_0 != 0) + MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled); + MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15); + MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15); + MENU_ITEM_EDIT(float32, MSG_FACTOR, &autotemp_factor, 0.0, 1.0); + #endif + #ifdef PIDTEMP + // set up temp variables - undo the default scaling + raw_Ki = unscalePID_i(PID_PARAM(Ki,0)); + raw_Kd = unscalePID_d(PID_PARAM(Kd,0)); + MENU_ITEM_EDIT(float52, MSG_PID_P, &PID_PARAM(Kp,0), 1, 9990); + // i is typically a small value so allows values below 1 + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E1); + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d_E1); #ifdef PID_ADD_EXTRUSION_RATE - MENU_ITEM_EDIT(float3, MSG_PID_C, &PID_PARAM(Kc,0), 1, 9990); + MENU_ITEM_EDIT(float3, MSG_PID_C, &PID_PARAM(Kc,0), 1, 9990); #endif//PID_ADD_EXTRUSION_RATE -#ifdef PID_PARAMS_PER_EXTRUDER - #if EXTRUDERS > 1 - // set up temp variables - undo the default scaling - pid_current_extruder = 0; - raw_Ki = unscalePID_i(PID_PARAM(Ki,1)); - raw_Kd = unscalePID_d(PID_PARAM(Kd,1)); - MENU_ITEM_EDIT(float52, MSG_PID_P " E2", &PID_PARAM(Kp,1), 1, 9990); - // i is typically a small value so allows values below 1 - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E2", &raw_Ki, 0.01, 9990, copy_and_scalePID_i); - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E2", &raw_Kd, 1, 9990, copy_and_scalePID_d); - #ifdef PID_ADD_EXTRUSION_RATE - MENU_ITEM_EDIT(float3, MSG_PID_C " E2", &PID_PARAM(Kc,1), 1, 9990); - #endif//PID_ADD_EXTRUSION_RATE - #endif//EXTRUDERS > 1 - #if EXTRUDERS > 2 - // set up temp variables - undo the default scaling - pid_current_extruder = 0; - raw_Ki = unscalePID_i(PID_PARAM(Ki,2)); - raw_Kd = unscalePID_d(PID_PARAM(Kd,2)); - MENU_ITEM_EDIT(float52, MSG_PID_P " E3", &PID_PARAM(Kp,2), 1, 9990); - // i is typically a small value so allows values below 1 - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E3", &raw_Ki, 0.01, 9990, copy_and_scalePID_i); - MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E3", &raw_Kd, 1, 9990, copy_and_scalePID_d); + #ifdef PID_PARAMS_PER_EXTRUDER + #if EXTRUDERS > 1 + // set up temp variables - undo the default scaling + raw_Ki = unscalePID_i(PID_PARAM(Ki,1)); + raw_Kd = unscalePID_d(PID_PARAM(Kd,1)); + MENU_ITEM_EDIT(float52, MSG_PID_P " E2", &PID_PARAM(Kp,1), 1, 9990); + // i is typically a small value so allows values below 1 + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E2", &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E2); + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E2", &raw_Kd, 1, 9990, copy_and_scalePID_d_E2); #ifdef PID_ADD_EXTRUSION_RATE - MENU_ITEM_EDIT(float3, MSG_PID_C " E3", &PID_PARAM(Kc,2), 1, 9990); + MENU_ITEM_EDIT(float3, MSG_PID_C " E2", &PID_PARAM(Kc,1), 1, 9990); #endif//PID_ADD_EXTRUSION_RATE - #endif//EXTRUDERS > 2 -#endif // PID_PARAMS_PER_EXTRUDER -#endif//PIDTEMP - MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu); - MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu); - END_MENU(); + + #if EXTRUDERS > 2 + // set up temp variables - undo the default scaling + raw_Ki = unscalePID_i(PID_PARAM(Ki,2)); + raw_Kd = unscalePID_d(PID_PARAM(Kd,2)); + MENU_ITEM_EDIT(float52, MSG_PID_P " E3", &PID_PARAM(Kp,2), 1, 9990); + // i is typically a small value so allows values below 1 + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E3", &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E3); + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E3", &raw_Kd, 1, 9990, copy_and_scalePID_d_E3); + #ifdef PID_ADD_EXTRUSION_RATE + MENU_ITEM_EDIT(float3, MSG_PID_C " E3", &PID_PARAM(Kc,2), 1, 9990); + #endif//PID_ADD_EXTRUSION_RATE + + #if EXTRUDERS > 3 + // set up temp variables - undo the default scaling + raw_Ki = unscalePID_i(PID_PARAM(Ki,3)); + raw_Kd = unscalePID_d(PID_PARAM(Kd,3)); + MENU_ITEM_EDIT(float52, MSG_PID_P " E4", &PID_PARAM(Kp,3), 1, 9990); + // i is typically a small value so allows values below 1 + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E4", &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E4); + MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E4", &raw_Kd, 1, 9990, copy_and_scalePID_d_E4); + #ifdef PID_ADD_EXTRUSION_RATE + MENU_ITEM_EDIT(float3, MSG_PID_C " E4", &PID_PARAM(Kc,3), 1, 9990); + #endif//PID_ADD_EXTRUSION_RATE + #endif//EXTRUDERS > 3 + #endif//EXTRUDERS > 2 + #endif//EXTRUDERS > 1 + #endif //PID_PARAMS_PER_EXTRUDER + #endif//PIDTEMP + MENU_ITEM(submenu, MSG_PREHEAT_PLA_SETTINGS, lcd_control_temperature_preheat_pla_settings_menu); + MENU_ITEM(submenu, MSG_PREHEAT_ABS_SETTINGS, lcd_control_temperature_preheat_abs_settings_menu); + END_MENU(); } static void lcd_control_temperature_preheat_pla_settings_menu() @@ -1785,24 +1823,4 @@ char *ftostr52(const float &x) return conv; } -// Callback for after editing PID i value -// grab the PID i value out of the temp variable; scale it; then update the PID driver -void copy_and_scalePID_i() -{ -#ifdef PIDTEMP - PID_PARAM(Ki, pid_current_extruder) = scalePID_i(raw_Ki); - updatePID(); -#endif -} - -// Callback for after editing PID d value -// grab the PID d value out of the temp variable; scale it; then update the PID driver -void copy_and_scalePID_d() -{ -#ifdef PIDTEMP - PID_PARAM(Kd, pid_current_extruder) = scalePID_d(raw_Kd); - updatePID(); -#endif -} - #endif //ULTRA_LCD