From 1c7391717e5848d8b8cc2067ec4f1ccb11089f29 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 31 Mar 2015 19:58:03 -0700 Subject: [PATCH] Include sync_plan_position_delta for SCARA also --- Marlin/Marlin_main.cpp | 192 ++++++++++++++++++++--------------------- 1 file changed, 92 insertions(+), 100 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index ee5f694c6..2c87bbd7f 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -1034,7 +1034,7 @@ inline void line_to_destination() { inline void sync_plan_position() { plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); } -#ifdef DELTA +#if defined(DELTA) || defined(SCARA) inline void sync_plan_position_delta() { calculate_delta(current_position); plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]); @@ -2177,8 +2177,7 @@ inline void gcode_G28() { bool do_topography_map = verbose_level > 2 || code_seen('T') || code_seen('t'); #endif - if (verbose_level > 0) - { + if (verbose_level > 0) { SERIAL_PROTOCOLPGM("G29 Auto Bed Leveling\n"); if (dryrun) SERIAL_ECHOLN("Running in DRY-RUN mode"); } @@ -2253,10 +2252,9 @@ inline void gcode_G28() { current_position[Y_AXIS] = uncorrected_position.y; current_position[Z_AXIS] = uncorrected_position.z; sync_plan_position(); - #endif // !DELTA } - + setup_for_endstop_move(); feedrate = homing_feedrate[Z_AXIS]; @@ -2264,8 +2262,8 @@ inline void gcode_G28() { #ifdef AUTO_BED_LEVELING_GRID // probe at the points of a lattice grid - const int xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (auto_bed_leveling_grid_points-1); - const int yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (auto_bed_leveling_grid_points-1); + const int xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (auto_bed_leveling_grid_points - 1), + yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (auto_bed_leveling_grid_points - 1); #ifdef DELTA delta_grid_spacing[0] = xGridSpacing; @@ -5255,104 +5253,99 @@ void clamp_to_software_endstops(float target[3]) } #ifdef DELTA -void recalc_delta_settings(float radius, float diagonal_rod) -{ - delta_tower1_x= -SIN_60*radius; // front left tower - delta_tower1_y= -COS_60*radius; - delta_tower2_x= SIN_60*radius; // front right tower - delta_tower2_y= -COS_60*radius; - delta_tower3_x= 0.0; // back middle tower - delta_tower3_y= radius; - delta_diagonal_rod_2= sq(diagonal_rod); -} -void calculate_delta(float cartesian[3]) -{ - delta[X_AXIS] = sqrt(delta_diagonal_rod_2 - - sq(delta_tower1_x-cartesian[X_AXIS]) - - sq(delta_tower1_y-cartesian[Y_AXIS]) - ) + cartesian[Z_AXIS]; - delta[Y_AXIS] = sqrt(delta_diagonal_rod_2 - - sq(delta_tower2_x-cartesian[X_AXIS]) - - sq(delta_tower2_y-cartesian[Y_AXIS]) - ) + cartesian[Z_AXIS]; - delta[Z_AXIS] = sqrt(delta_diagonal_rod_2 - - sq(delta_tower3_x-cartesian[X_AXIS]) - - sq(delta_tower3_y-cartesian[Y_AXIS]) - ) + cartesian[Z_AXIS]; - /* - SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]); - SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]); - SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]); + void recalc_delta_settings(float radius, float diagonal_rod) { + delta_tower1_x = -SIN_60 * radius; // front left tower + delta_tower1_y = -COS_60 * radius; + delta_tower2_x = SIN_60 * radius; // front right tower + delta_tower2_y = -COS_60 * radius; + delta_tower3_x = 0.0; // back middle tower + delta_tower3_y = radius; + delta_diagonal_rod_2 = sq(diagonal_rod); + } - SERIAL_ECHOPGM("delta x="); SERIAL_ECHO(delta[X_AXIS]); - SERIAL_ECHOPGM(" y="); SERIAL_ECHO(delta[Y_AXIS]); - SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(delta[Z_AXIS]); - */ -} + void calculate_delta(float cartesian[3]) { + delta[X_AXIS] = sqrt(delta_diagonal_rod_2 + - sq(delta_tower1_x-cartesian[X_AXIS]) + - sq(delta_tower1_y-cartesian[Y_AXIS]) + ) + cartesian[Z_AXIS]; + delta[Y_AXIS] = sqrt(delta_diagonal_rod_2 + - sq(delta_tower2_x-cartesian[X_AXIS]) + - sq(delta_tower2_y-cartesian[Y_AXIS]) + ) + cartesian[Z_AXIS]; + delta[Z_AXIS] = sqrt(delta_diagonal_rod_2 + - sq(delta_tower3_x-cartesian[X_AXIS]) + - sq(delta_tower3_y-cartesian[Y_AXIS]) + ) + cartesian[Z_AXIS]; + /* + SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]); + SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]); + SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]); + + SERIAL_ECHOPGM("delta x="); SERIAL_ECHO(delta[X_AXIS]); + SERIAL_ECHOPGM(" y="); SERIAL_ECHO(delta[Y_AXIS]); + SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(delta[Z_AXIS]); + */ + } -#ifdef ENABLE_AUTO_BED_LEVELING -// Adjust print surface height by linear interpolation over the bed_level array. -int delta_grid_spacing[2] = { 0, 0 }; -void adjust_delta(float cartesian[3]) -{ - if (delta_grid_spacing[0] == 0 || delta_grid_spacing[1] == 0) - return; // G29 not done - - int half = (AUTO_BED_LEVELING_GRID_POINTS - 1) / 2; - float grid_x = max(0.001-half, min(half-0.001, cartesian[X_AXIS] / delta_grid_spacing[0])); - float grid_y = max(0.001-half, min(half-0.001, cartesian[Y_AXIS] / delta_grid_spacing[1])); - int floor_x = floor(grid_x); - int floor_y = floor(grid_y); - float ratio_x = grid_x - floor_x; - float ratio_y = grid_y - floor_y; - float z1 = bed_level[floor_x+half][floor_y+half]; - float z2 = bed_level[floor_x+half][floor_y+half+1]; - float z3 = bed_level[floor_x+half+1][floor_y+half]; - float z4 = bed_level[floor_x+half+1][floor_y+half+1]; - float left = (1-ratio_y)*z1 + ratio_y*z2; - float right = (1-ratio_y)*z3 + ratio_y*z4; - float offset = (1-ratio_x)*left + ratio_x*right; - - delta[X_AXIS] += offset; - delta[Y_AXIS] += offset; - delta[Z_AXIS] += offset; + #ifdef ENABLE_AUTO_BED_LEVELING - /* - SERIAL_ECHOPGM("grid_x="); SERIAL_ECHO(grid_x); - SERIAL_ECHOPGM(" grid_y="); SERIAL_ECHO(grid_y); - SERIAL_ECHOPGM(" floor_x="); SERIAL_ECHO(floor_x); - SERIAL_ECHOPGM(" floor_y="); SERIAL_ECHO(floor_y); - SERIAL_ECHOPGM(" ratio_x="); SERIAL_ECHO(ratio_x); - SERIAL_ECHOPGM(" ratio_y="); SERIAL_ECHO(ratio_y); - SERIAL_ECHOPGM(" z1="); SERIAL_ECHO(z1); - SERIAL_ECHOPGM(" z2="); SERIAL_ECHO(z2); - SERIAL_ECHOPGM(" z3="); SERIAL_ECHO(z3); - SERIAL_ECHOPGM(" z4="); SERIAL_ECHO(z4); - SERIAL_ECHOPGM(" left="); SERIAL_ECHO(left); - SERIAL_ECHOPGM(" right="); SERIAL_ECHO(right); - SERIAL_ECHOPGM(" offset="); SERIAL_ECHOLN(offset); - */ -} -#endif //ENABLE_AUTO_BED_LEVELING + // Adjust print surface height by linear interpolation over the bed_level array. + int delta_grid_spacing[2] = { 0, 0 }; + void adjust_delta(float cartesian[3]) { + if (delta_grid_spacing[0] == 0 || delta_grid_spacing[1] == 0) return; // G29 not done! + + int half = (AUTO_BED_LEVELING_GRID_POINTS - 1) / 2; + float h1 = 0.001 - half, h2 = half - 0.001, + grid_x = max(h1, min(h2, cartesian[X_AXIS] / delta_grid_spacing[0])), + grid_y = max(h1, min(h2, cartesian[Y_AXIS] / delta_grid_spacing[1])); + int floor_x = floor(grid_x), floor_y = floor(grid_y); + float ratio_x = grid_x - floor_x, ratio_y = grid_y - floor_y, + z1 = bed_level[floor_x + half][floor_y + half], + z2 = bed_level[floor_x + half][floor_y + half + 1], + z3 = bed_level[floor_x + half + 1][floor_y + half], + z4 = bed_level[floor_x + half + 1][floor_y + half + 1], + left = (1 - ratio_y) * z1 + ratio_y * z2, + right = (1 - ratio_y) * z3 + ratio_y * z4, + offset = (1 - ratio_x) * left + ratio_x * right; + + delta[X_AXIS] += offset; + delta[Y_AXIS] += offset; + delta[Z_AXIS] += offset; + + /* + SERIAL_ECHOPGM("grid_x="); SERIAL_ECHO(grid_x); + SERIAL_ECHOPGM(" grid_y="); SERIAL_ECHO(grid_y); + SERIAL_ECHOPGM(" floor_x="); SERIAL_ECHO(floor_x); + SERIAL_ECHOPGM(" floor_y="); SERIAL_ECHO(floor_y); + SERIAL_ECHOPGM(" ratio_x="); SERIAL_ECHO(ratio_x); + SERIAL_ECHOPGM(" ratio_y="); SERIAL_ECHO(ratio_y); + SERIAL_ECHOPGM(" z1="); SERIAL_ECHO(z1); + SERIAL_ECHOPGM(" z2="); SERIAL_ECHO(z2); + SERIAL_ECHOPGM(" z3="); SERIAL_ECHO(z3); + SERIAL_ECHOPGM(" z4="); SERIAL_ECHO(z4); + SERIAL_ECHOPGM(" left="); SERIAL_ECHO(left); + SERIAL_ECHOPGM(" right="); SERIAL_ECHO(right); + SERIAL_ECHOPGM(" offset="); SERIAL_ECHOLN(offset); + */ + } + #endif // ENABLE_AUTO_BED_LEVELING -void prepare_move_raw() -{ - previous_millis_cmd = millis(); - calculate_delta(destination); - plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], - destination[E_AXIS], feedrate*feedmultiply/60/100.0, - active_extruder); - for(int8_t i=0; i < NUM_AXIS; i++) { - current_position[i] = destination[i]; + void prepare_move_raw() { + previous_millis_cmd = millis(); + calculate_delta(destination); + plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], (feedrate/60)*(feedmultiply/100.0), active_extruder); + for (int i = 0; i < NUM_AXIS; i++) current_position[i] = destination[i]; } -} -#endif //DELTA + +#endif // DELTA #if defined(MESH_BED_LEVELING) -#if !defined(MIN) -#define MIN(_v1, _v2) (((_v1) < (_v2)) ? (_v1) : (_v2)) -#endif // ! MIN + + #if !defined(MIN) + #define MIN(_v1, _v2) (((_v1) < (_v2)) ? (_v1) : (_v2)) + #endif // ! MIN + // This function is used to split lines on mesh borders so each segment is only part of one mesh area void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_rate, const uint8_t &extruder, uint8_t x_splits=0xff, uint8_t y_splits=0xff) { @@ -5424,8 +5417,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_ } #endif // MESH_BED_LEVELING -void prepare_move() -{ +void prepare_move() { clamp_to_software_endstops(destination); previous_millis_cmd = millis(); @@ -5539,7 +5531,7 @@ void prepare_move() } #endif //DUAL_X_CARRIAGE -#if ! (defined DELTA || defined SCARA) +#if !defined(DELTA) && !defined(SCARA) // Do not use feedmultiply for E or Z only moves if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) { line_to_destination();