From 199a1ba0e566cc91d5082bbafdef81c6f0800c36 Mon Sep 17 00:00:00 2001 From: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sun, 16 Feb 2020 05:45:52 +0100 Subject: [PATCH] Move SAMD51 Temperature timer to RTC (#16868) --- Marlin/src/HAL/HAL_SAMD51/timers.cpp | 106 +++++++++++++++++---------- Marlin/src/HAL/HAL_SAMD51/timers.h | 38 +++++++--- 2 files changed, 97 insertions(+), 47 deletions(-) diff --git a/Marlin/src/HAL/HAL_SAMD51/timers.cpp b/Marlin/src/HAL/HAL_SAMD51/timers.cpp index 95784c760..99839cd48 100644 --- a/Marlin/src/HAL/HAL_SAMD51/timers.cpp +++ b/Marlin/src/HAL/HAL_SAMD51/timers.cpp @@ -37,15 +37,16 @@ // Private Variables // -------------------------------------------------------------------------- -const tTimerConfig TimerConfig[NUM_HARDWARE_TIMERS] = { - { TC0, TC0_IRQn, TC_PRIORITY(0) }, - { TC1, TC1_IRQn, TC_PRIORITY(1) }, - { TC2, TC2_IRQn, TC_PRIORITY(2) }, // Reserved by framework tone function - { TC3, TC3_IRQn, TC_PRIORITY(3) }, // Reserved by servo library - { TC4, TC4_IRQn, TC_PRIORITY(4) }, - { TC5, TC5_IRQn, TC_PRIORITY(5) }, - { TC6, TC6_IRQn, TC_PRIORITY(6) }, - { TC7, TC7_IRQn, TC_PRIORITY(7) } +const tTimerConfig TimerConfig[NUM_HARDWARE_TIMERS+1] = { + { {.pTc=TC0}, TC0_IRQn, TC_PRIORITY(0) }, // 0 - stepper + { {.pTc=TC1}, TC1_IRQn, TC_PRIORITY(1) }, // 1 - stepper (needed by 32 bit timers) + { {.pTc=TC2}, TC2_IRQn, TC_PRIORITY(2) }, // 2 - tone (framework) + { {.pTc=TC3}, TC3_IRQn, TC_PRIORITY(3) }, // 3 - servo + { {.pTc=TC4}, TC4_IRQn, TC_PRIORITY(4) }, + { {.pTc=TC5}, TC5_IRQn, TC_PRIORITY(5) }, + { {.pTc=TC6}, TC6_IRQn, TC_PRIORITY(6) }, + { {.pTc=TC7}, TC7_IRQn, TC_PRIORITY(7) }, + { {.pRtc=RTC}, RTC_IRQn, TC_PRIORITY(8) } // 8 - temperature }; // -------------------------------------------------------------------------- @@ -66,49 +67,80 @@ FORCE_INLINE void Disable_Irq(IRQn_Type irq) { // -------------------------------------------------------------------------- void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { - Tc * const tc = TimerConfig[timer_num].pTimer; IRQn_Type irq = TimerConfig[timer_num].IRQ_Id; // Disable interrupt, just in case it was already enabled Disable_Irq(irq); - // Disable timer interrupt - tc->COUNT32.INTENCLR.reg = TC_INTENCLR_OVF; // disable overflow interrupt + if (timer_num == RTC_TIMER_NUM) { + Rtc * const rtc = TimerConfig[timer_num].pRtc; - // TCn clock setup - const uint8_t clockID = GCLK_CLKCTRL_IDs[TCC_INST_NUM + timer_num]; - GCLK->PCHCTRL[clockID].bit.CHEN = false; - SYNC(GCLK->PCHCTRL[clockID].bit.CHEN); - GCLK->PCHCTRL[clockID].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN; // 120MHz startup code programmed - SYNC(!GCLK->PCHCTRL[clockID].bit.CHEN); + // Disable timer interrupt + rtc->MODE0.INTENCLR.reg = RTC_MODE0_INTENCLR_CMP0; - // Stop timer, just in case, to be able to reconfigure it - tc->COUNT32.CTRLA.bit.ENABLE = false; - SYNC(tc->COUNT32.SYNCBUSY.bit.ENABLE); + // RTC clock setup + OSC32KCTRL->RTCCTRL.reg = OSC32KCTRL_RTCCTRL_RTCSEL_XOSC32K; // External 32.768KHz oscillator - // Reset timer - tc->COUNT32.CTRLA.bit.SWRST = true; - SYNC(tc->COUNT32.SYNCBUSY.bit.SWRST); + // Stop timer, just in case, to be able to reconfigure it + rtc->MODE0.CTRLA.bit.ENABLE = false; + SYNC(rtc->MODE0.SYNCBUSY.bit.ENABLE); - NVIC_SetPriority(irq, TimerConfig[timer_num].priority); + // Mode, reset counter on match + rtc->MODE0.CTRLA.reg = RTC_MODE0_CTRLA_MODE_COUNT32 | RTC_MODE0_CTRLA_MATCHCLR; + + // Set compare value + rtc->MODE0.COMP[0].reg = (32768 + frequency / 2) / frequency; + SYNC(rtc->MODE0.SYNCBUSY.bit.COMP0); + + // Enable interrupt on compare + rtc->MODE0.INTFLAG.reg = RTC_MODE0_INTFLAG_CMP0; // reset pending interrupt + rtc->MODE0.INTENSET.reg = RTC_MODE0_INTENSET_CMP0; // enable compare 0 interrupt + + // And start timer + rtc->MODE0.CTRLA.bit.ENABLE = true; + SYNC(rtc->MODE0.SYNCBUSY.bit.ENABLE); + } + else { + Tc * const tc = TimerConfig[timer_num].pTc; + + // Disable timer interrupt + tc->COUNT32.INTENCLR.reg = TC_INTENCLR_OVF; // disable overflow interrupt - // Wave mode, reset counter on overflow on 0 (I use count down to prevent double buffer use) - tc->COUNT32.WAVE.reg = TC_WAVE_WAVEGEN_MFRQ; - tc->COUNT32.CTRLA.reg = TC_CTRLA_MODE_COUNT32 | TC_CTRLA_PRESCALER_DIV1; - tc->COUNT32.CTRLBSET.reg = TC_CTRLBCLR_DIR; - SYNC(tc->COUNT32.SYNCBUSY.bit.CTRLB); + // TCn clock setup + const uint8_t clockID = GCLK_CLKCTRL_IDs[TCC_INST_NUM + timer_num]; // TC clock are preceeded by TCC ones + GCLK->PCHCTRL[clockID].bit.CHEN = false; + SYNC(GCLK->PCHCTRL[clockID].bit.CHEN); + GCLK->PCHCTRL[clockID].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN; // 120MHz startup code programmed + SYNC(!GCLK->PCHCTRL[clockID].bit.CHEN); - // Set compare value - tc->COUNT32.COUNT.reg = tc->COUNT32.CC[0].reg = (HAL_TIMER_RATE) / frequency; + // Stop timer, just in case, to be able to reconfigure it + tc->COUNT32.CTRLA.bit.ENABLE = false; + SYNC(tc->COUNT32.SYNCBUSY.bit.ENABLE); - // And start timer - tc->COUNT32.CTRLA.bit.ENABLE = true; - SYNC(tc->COUNT32.SYNCBUSY.bit.ENABLE); + // Reset timer + tc->COUNT32.CTRLA.bit.SWRST = true; + SYNC(tc->COUNT32.SYNCBUSY.bit.SWRST); - // Enable interrupt on RC compare - tc->COUNT32.INTENSET.reg = TC_INTENCLR_OVF; // enable overflow interrupt + // Wave mode, reset counter on overflow on 0 (I use count down to prevent double buffer use) + tc->COUNT32.WAVE.reg = TC_WAVE_WAVEGEN_MFRQ; + tc->COUNT32.CTRLA.reg = TC_CTRLA_MODE_COUNT32 | TC_CTRLA_PRESCALER_DIV1; + tc->COUNT32.CTRLBSET.reg = TC_CTRLBCLR_DIR; + SYNC(tc->COUNT32.SYNCBUSY.bit.CTRLB); + + // Set compare value + tc->COUNT32.COUNT.reg = tc->COUNT32.CC[0].reg = (HAL_TIMER_RATE) / frequency; + + // Enable interrupt on compare + tc->COUNT32.INTFLAG.reg = TC_INTFLAG_OVF; // reset pending interrupt + tc->COUNT32.INTENSET.reg = TC_INTENSET_OVF; // enable overflow interrupt + + // And start timer + tc->COUNT32.CTRLA.bit.ENABLE = true; + SYNC(tc->COUNT32.SYNCBUSY.bit.ENABLE); + } // Finally, enable IRQ + NVIC_SetPriority(irq, TimerConfig[timer_num].priority); NVIC_EnableIRQ(irq); } diff --git a/Marlin/src/HAL/HAL_SAMD51/timers.h b/Marlin/src/HAL/HAL_SAMD51/timers.h index 7ebd1b140..073239c43 100644 --- a/Marlin/src/HAL/HAL_SAMD51/timers.h +++ b/Marlin/src/HAL/HAL_SAMD51/timers.h @@ -25,6 +25,7 @@ // -------------------------------------------------------------------------- // Defines // -------------------------------------------------------------------------- +#define RTC_TIMER_NUM 8 // This is not a TC but a RTC typedef uint32_t hal_timer_t; #define HAL_TIMER_TYPE_MAX 0xFFFFFFFF @@ -33,12 +34,12 @@ typedef uint32_t hal_timer_t; #define STEP_TIMER_NUM 0 // index of timer to use for stepper (also +1 for 32bits counter) #define PULSE_TIMER_NUM STEP_TIMER_NUM -#define TEMP_TIMER_NUM 4 // index of timer to use for temperature (also +1 for 32bits counter) +#define TEMP_TIMER_NUM RTC_TIMER_NUM // index of timer to use for temperature #define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency #define STEPPER_TIMER_RATE HAL_TIMER_RATE // frequency of stepper timer (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) -#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs +#define STEPPER_TIMER_TICKS_PER_US (STEPPER_TIMER_RATE / 1000000) // stepper timer ticks per µs #define STEPPER_TIMER_PRESCALE (CYCLES_PER_MICROSECOND / STEPPER_TIMER_TICKS_PER_US) #define PULSE_TIMER_RATE STEPPER_TIMER_RATE @@ -62,14 +63,21 @@ typedef uint32_t hal_timer_t; #if STEP_TIMER_NUM != PULSE_TIMER_NUM #define HAL_PULSE_TIMER_ISR() TC_HANDLER(PULSE_TIMER_NUM) #endif -#define HAL_TEMP_TIMER_ISR() TC_HANDLER(TEMP_TIMER_NUM) +#if TEMP_TIMER_NUM == RTC_TIMER_NUM + #define HAL_TEMP_TIMER_ISR() void RTC_Handler() +#else + #define HAL_TEMP_TIMER_ISR() TC_HANDLER(TEMP_TIMER_NUM) +#endif // -------------------------------------------------------------------------- // Types // -------------------------------------------------------------------------- typedef struct { - Tc *pTimer; + union { + Tc *pTc; + Rtc *pRtc; + }; IRQn_Type IRQ_Id; uint8_t priority; } tTimerConfig; @@ -87,17 +95,20 @@ extern const tTimerConfig TimerConfig[]; void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency); FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare) { - Tc * const tc = TimerConfig[timer_num].pTimer; + // Should never be called with timer RTC_TIMER_NUM + Tc * const tc = TimerConfig[timer_num].pTc; tc->COUNT32.CC[0].reg = HAL_TIMER_TYPE_MAX - compare; } FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) { - Tc * const tc = TimerConfig[timer_num].pTimer; + // Should never be called with timer RTC_TIMER_NUM + Tc * const tc = TimerConfig[timer_num].pTc; return (hal_timer_t)(HAL_TIMER_TYPE_MAX - tc->COUNT32.CC[0].reg); } FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) { - Tc * const tc = TimerConfig[timer_num].pTimer; + // Should never be called with timer RTC_TIMER_NUM + Tc * const tc = TimerConfig[timer_num].pTc; tc->COUNT32.CTRLBSET.reg = TC_CTRLBCLR_CMD_READSYNC; SYNC(tc->COUNT32.SYNCBUSY.bit.CTRLB || tc->COUNT32.SYNCBUSY.bit.COUNT); return HAL_TIMER_TYPE_MAX - tc->COUNT32.COUNT.reg; @@ -108,9 +119,16 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num); bool HAL_timer_interrupt_enabled(const uint8_t timer_num); FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) { - Tc * const tc = TimerConfig[timer_num].pTimer; - // Clear interrupt flag - tc->COUNT32.INTFLAG.reg = TC_INTFLAG_OVF; + if (timer_num == RTC_TIMER_NUM) { + Rtc * const rtc = TimerConfig[timer_num].pRtc; + // Clear interrupt flag + rtc->MODE0.INTFLAG.reg = RTC_MODE0_INTFLAG_CMP0; + } + else { + Tc * const tc = TimerConfig[timer_num].pTc; + // Clear interrupt flag + tc->COUNT32.INTFLAG.reg = TC_INTFLAG_OVF; + } } #define HAL_timer_isr_epilogue(timer_num)