diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index bc01eba00..4e4393ae8 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/default/Configuration.h b/config/default/Configuration.h index bc01eba00..4e4393ae8 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index fdb57528b..e04d06cf5 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -863,23 +863,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 21 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 61 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index 722ef1cd4..2df48bc0c 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -877,23 +877,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 045d79d51..2d7a789f0 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 8ed66dbd3..96eff9c21 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -868,23 +868,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 142dd6618..02f701dcb 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ //#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] //#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 5d0d4b3a5..49a4ba2f1 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ //#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] //#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index d3792673f..1f7b2b87b 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -904,23 +904,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ //#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] //#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 2d9ce901c..72b509cf3 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -870,23 +870,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 5ebac66de..4b39c7110 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -868,23 +868,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h index bef80df4e..896514857 100644 --- a/config/examples/Anet/E16/Configuration.h +++ b/config/examples/Anet/E16/Configuration.h @@ -869,23 +869,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 18b3af839..4cf880834 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -867,23 +867,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 75 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 91105c18d..41fb08b9f 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -858,23 +858,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 6ac69d430..16505588a 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index becab79c7..2e45cb2ef 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 8a3122d8b..49bf0753c 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index abdfd67c8..39c63e31a 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -845,23 +845,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index cb19f6926..ddf5ecf7c 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -858,23 +858,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 105065e4b..bc4a058ff 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -845,23 +845,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 28a1407f4..14c73f825 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -856,23 +856,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h index b70655ce8..b4b9a7b64 100644 --- a/config/examples/Creality/CR-10/Configuration.h +++ b/config/examples/Creality/CR-10/Configuration.h @@ -867,23 +867,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h index bc468232b..c1278b75f 100644 --- a/config/examples/Creality/CR-10S/Configuration.h +++ b/config/examples/Creality/CR-10S/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h index 950e040de..d49fe6faf 100644 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ b/config/examples/Creality/CR-10_5S/Configuration.h @@ -858,23 +858,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h index 23e3a3e74..394fbf63e 100644 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ b/config/examples/Creality/CR-10mini/Configuration.h @@ -876,23 +876,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index fcd6f73d9..fc1ab2782 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -867,23 +867,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 79b76513c..f355cf988 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -861,23 +861,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h index 9e0fcd12a..bd4d338f1 100644 --- a/config/examples/Creality/Ender-3/Configuration.h +++ b/config/examples/Creality/Ender-3/Configuration.h @@ -861,23 +861,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 2c6783ecd..41d697067 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -867,23 +867,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 48d58b091..4d4e161d7 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -866,23 +866,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h index f20a2347f..0bd72dd75 100644 --- a/config/examples/Felix/Configuration.h +++ b/config/examples/Felix/Configuration.h @@ -839,23 +839,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 2597a4763..37548d7b1 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -839,23 +839,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index dc6322ee3..ac1676a5f 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -849,23 +849,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 9d91dc6c2..9ff1c44f9 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -863,23 +863,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 38 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -7 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 57ec0e536..f2353bab2 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -940,23 +940,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -22 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 6f2379e6c..f27e931b4 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -887,23 +887,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -3 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 31 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 49ca9da56..c3fcb1201 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -873,23 +873,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -3 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 31 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index ee370d8d9..bf073c5f5 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -841,23 +841,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -37 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 1d39509ea..2e0c0742b 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -841,23 +841,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -37 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 42f0f7452..81da7cf6d 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -872,23 +872,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 2bfc89ce5..529bba8c6 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -850,23 +850,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 79cf8fed0..902de4187 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -864,23 +864,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 6c1211c41..c15e0177e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -877,23 +877,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 4 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -44 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index ef2f23c51..7cbebd98a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -877,23 +877,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index c3a5a084f..774317e69 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 3a72bd3e1..332d1192a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index fa86fbb5f..d3a2f313c 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -861,23 +861,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index adc915ad7..3c941a05a 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -869,23 +869,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index a934333e3..36128f98b 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -877,23 +877,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 81dda9bf3..296f47439 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -877,23 +877,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ // Set for HoolyHoo's probe mount diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 6188546c8..cfa8463b0 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -856,23 +856,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 1923a4ee3..d865baadf 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -861,23 +861,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index feb5bf523..00bccf003 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -861,23 +861,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 74771783d..c145a1c00 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -858,23 +858,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index dcaec6f5b..0cac8f55f 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 32 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 96e773304..9aa4fdbec 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -865,23 +865,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 6aaff1ae0..2171159e5 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 9e3566617..125b28270 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -897,23 +897,23 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 7c9373ca0..260d1bb48 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index de7e6594b..3aaadc444 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -855,23 +855,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h index 977fc669f..ce5279805 100644 --- a/config/examples/SCARA/Configuration.h +++ b/config/examples/SCARA/Configuration.h @@ -870,23 +870,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 8b18b31a0..70e457b59 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h index b0bec6bb3..9fbd2cd4c 100644 --- a/config/examples/STM32/STM32F10/Configuration.h +++ b/config/examples/STM32/STM32F10/Configuration.h @@ -859,23 +859,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 4ef5f7092..137ad945a 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h index 9ee3c8f6a..1d8ee2d0d 100644 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ b/config/examples/STM32/stm32f103ret6/Configuration.h @@ -859,23 +859,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 7efd428d9..412fe24e7 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -888,23 +888,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index ebb21cfb1..d3aedbfe7 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 32 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index fa8c86701..fc96df55e 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -908,23 +908,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index dbb8e66c2..5be329d41 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 0b6997f69..0f51e5d18 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -32 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 7af29c0ca..a9fb0d0cd 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -878,23 +878,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 16a4a24a4..9426ee3c4 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -856,23 +856,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -45 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 298ef0084..6a117c53c 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -868,23 +868,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 17db540e9..e7342881b 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 02f333eb7..ddee01d5a 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index adab15311..d5220e484 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -866,23 +866,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 5d048bf43..f24830b61 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -886,23 +886,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h index e6c2921c5..ef2e0da4d 100644 --- a/config/examples/Velleman/K8400/Configuration.h +++ b/config/examples/Velleman/K8400/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index acc5e4aef..7b12f3db4 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index d7b68ef4f..3f3b5a68b 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -876,23 +876,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index a30111457..782e55415 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -867,23 +867,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index d64fec1cf..52f079b8f 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -857,23 +857,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index dd1c65997..10b589bb0 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1036,23 +1036,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 39dcf4517..864221773 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -985,23 +985,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 2356b7204..19c001d44 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -984,23 +984,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 620004991..cee35393b 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -984,23 +984,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 21d8eb8f6..95f0a6376 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -972,23 +972,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 53a69235e..331c10bd7 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -987,23 +987,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index dcebdb7d0..60cde51bc 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -972,23 +972,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 43a6269dd..0d6ca8fd9 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -969,23 +969,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 20 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 7e583bd71..314e24dd3 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -972,23 +972,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 3d1cf19ce..97e37d35c 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -974,23 +974,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 5785a7321..e8c043868 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -971,23 +971,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -23 // KosselPro actual: -22.919 #define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // KosselPro actual: -6.304 diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 4cb6a57c6..05c4632e2 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -975,23 +975,23 @@ #endif // Z_PROBE_ALLEN_KEY /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle X offset: -left +right #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 1a2f35083..b45a07675 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -863,23 +863,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -17 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 54f5ddb18..0635382de 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -860,23 +860,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 52ea4b9f3..632482248 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -852,23 +852,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h index b767fc215..c88cc543c 100644 --- a/config/examples/wt150/Configuration.h +++ b/config/examples/wt150/Configuration.h @@ -862,23 +862,23 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) */ #define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]