diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 02d98b980..093097803 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 02d98b980..093097803 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 2fa9cc7d7..6d0a52bb9 100644
--- a/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index ac838f525..8b413d121 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
index 03c7b4356..a9f0e1dcf 100644
--- a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
index 03c7b4356..a9f0e1dcf 100644
--- a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index e4a355172..9c2a22e69 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -1539,7 +1539,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 2cbd5697b..b6d8e4d8d 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h b/Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h
index ab4a2ae4c..707c2da49 100644
--- a/Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/ArmEd/Configuration_adv.h b/Marlin/src/config/examples/ArmEd/Configuration_adv.h
index 9bb0f8cdd..c8f6d97ff 100644
--- a/Marlin/src/config/examples/ArmEd/Configuration_adv.h
+++ b/Marlin/src/config/examples/ArmEd/Configuration_adv.h
@@ -1545,7 +1545,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index 59c4f0fac..b0f606893 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -1539,7 +1539,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 36566a9c0..0a9295974 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index e6b6c8580..f7d494beb 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 1c9d92fbf..cc7a65d81 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1548,7 +1548,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index e6b6c8580..f7d494beb 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index c7771ab3d..a7ef9cd9f 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index adca69991..42482df0e 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index 904ea109d..96580e89c 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Creality/CR-10_5S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10_5S/Configuration_adv.h
index ec31794a0..105410e80 100644
--- a/Marlin/src/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
index 58bcd2a6a..e659bc5ee 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
index 26574bfc6..dd575afa8 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
index 0ff923351..8e30d9dc5 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
index 0ba93dcfc..8dff6bf81 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
index bc451683d..223a7a9f6 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
index 4423efede..9fff61f3c 100644
--- a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 01e706d0e..488fabc82 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index dee3ef2c0..60b0e3d3f 100644
--- a/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -1539,7 +1539,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 97c70f77b..287406447 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
index bf0f6f3a1..770f07dba 100644
--- a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -1542,7 +1542,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 4a49b4dbc..be7e0acd7 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -1545,7 +1545,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index b805afb2e..0006631e7 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -1545,7 +1545,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Geeetech/A10M/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/A10M/Configuration_adv.h
index ac6d87e81..d4188bdb9 100644
--- a/Marlin/src/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/Marlin/src/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Geeetech/A20M/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/A20M/Configuration_adv.h
index 62a57a90e..1edeeb3f6 100644
--- a/Marlin/src/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/Marlin/src/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 12a615a6b..ddb62de9d 100644
--- a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index d1e03c959..0b6e9c18a 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index d1e03c959..0b6e9c18a 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 17c219d6a..26d245380 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index fa23ef394..2855b697e 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index 60a6b326e..6c4d6b4dd 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 952433b02..84bc3f9b1 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index bf6440ec4..67ec25cac 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index d68637944..18da1414a 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h
index 2d9cfc625..6a703e961 100644
--- a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index 9325d0b27..c0a12245d 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1548,7 +1548,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h b/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h
index 172a78765..e936b6520 100644
--- a/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 6a8e02287..095702934 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 04f55bf5e..6a82ac999 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index df1a45ee6..dddb760a2 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index 54c8c1913..39c77d379 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index c5ca35341..936ea20d4 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
index c365f242a..8e5a29667 100644
--- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 90f37df4b..a96003442 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 5b157fd09..4b8007d53 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h
index bedf3d497..808ecde70 100644
--- a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h
+++ b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 1232065e6..3e755e12a 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1553,7 +1553,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index d47966894..7156f6e23 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h b/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h
index 58881627c..f0abe3296 100644
--- a/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index c47b253c7..6c4ac25a4 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1542,7 +1542,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 3e5cbd9e2..d40c3028b 100644
--- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -1542,7 +1542,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index a0c14b1ff..2d2128208 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1542,7 +1542,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index a0c14b1ff..2d2128208 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -1542,7 +1542,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index bc4077a55..becce84f4 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1542,7 +1542,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 19877be5c..550dd8ed4 100644
--- a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
+++ b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
@@ -1543,7 +1543,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 761123301..0c755bec6 100644
--- a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -1542,7 +1542,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 2db509810..6027c1dee 100644
--- a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -1542,7 +1542,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index bc4077a55..becce84f4 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -1542,7 +1542,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index fbcea310f..ee2282f96 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 64d55d783..daaafee31 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1542,7 +1542,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index cb811ce59..a78b46889 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index a82a92a69..e48211ed3 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index 0dcc938bb..912832309 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1540,7 +1540,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS
 
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 1ca720f0a..2b8d7d296 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -1541,7 +1541,7 @@
    * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
    * M911 - Report stepper driver overtemperature pre-warn condition.
    * M912 - Clear stepper driver overtemperature pre-warn condition flag.
-   * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
    */
   //#define MONITOR_DRIVER_STATUS