From aef9e036bf5548ad494d23cd4dcde99fa0dee7ac Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 18 Feb 2018 04:43:01 -0600 Subject: [PATCH 01/32] More overridable FIL_RUNOUT_PIN --- Marlin/src/pins/pins_CHEAPTRONICv2.h | 4 +++- Marlin/src/pins/pins_CNCONTROLS_12.h | 4 +++- Marlin/src/pins/pins_RAMPS_RE_ARM.h | 12 +++++++----- 3 files changed, 13 insertions(+), 7 deletions(-) diff --git a/Marlin/src/pins/pins_CHEAPTRONICv2.h b/Marlin/src/pins/pins_CHEAPTRONICv2.h index 327883898..e6840abeb 100644 --- a/Marlin/src/pins/pins_CHEAPTRONICv2.h +++ b/Marlin/src/pins/pins_CHEAPTRONICv2.h @@ -109,7 +109,9 @@ // // Other board specific pins // -#define FIL_RUNOUT_PIN 37 // board input labeled as F-DET +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 37 // board input labeled as F-DET +#endif #define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe) #define LED_PIN 13 #define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too diff --git a/Marlin/src/pins/pins_CNCONTROLS_12.h b/Marlin/src/pins/pins_CNCONTROLS_12.h index 50c87cda6..5cf462a94 100644 --- a/Marlin/src/pins/pins_CNCONTROLS_12.h +++ b/Marlin/src/pins/pins_CNCONTROLS_12.h @@ -91,7 +91,9 @@ // Common I/O -#define FIL_RUNOUT_PIN 18 +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 18 +#endif //#define PWM_1_PIN 12 //#define PWM_2_PIN 13 //#define SPARE_IO 17 diff --git a/Marlin/src/pins/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/pins_RAMPS_RE_ARM.h index 8932ece82..ea6deba01 100644 --- a/Marlin/src/pins/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/pins_RAMPS_RE_ARM.h @@ -190,19 +190,21 @@ #endif #ifndef FAN_PIN - #define FAN_PIN P1_18 // (4) IO pin. Buffer needed + #define FAN_PIN P1_18 // (4) IO pin. Buffer needed #endif // // Misc. Functions // -#define LED_PIN P4_28 // (13) -#define SDSS P1_23 // (53) +#define LED_PIN P4_28 // (13) +#define SDSS P1_23 // (53) // define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector -#define FIL_RUNOUT_PIN P1_18 // (4) +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN P1_18 // (4) +#endif -#define PS_ON_PIN P2_12 // (12) +#define PS_ON_PIN P2_12 // (12) #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENABLE_PIN) #if !defined(NUM_SERVOS) || NUM_SERVOS < 4 // try to use servo connector From ca55f2927ab7416c6f404cfdeade4c9d5103929c Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 18 Feb 2018 19:26:23 -0600 Subject: [PATCH 02/32] Pulldown pin mode support (#9701) Implemented for LPC1768. --- Marlin/Configuration.h | 23 +++++++-- Marlin/src/HAL/HAL_LPC1768/arduino.cpp | 49 ++++++++++--------- Marlin/src/HAL/HAL_LPC1768/fastio.h | 5 ++ Marlin/src/HAL/HAL_LPC1768/include/Arduino.h | 9 ++-- Marlin/src/Marlin.cpp | 4 +- Marlin/src/config/default/Configuration.h | 23 +++++++-- .../AlephObjects/TAZ4/Configuration.h | 23 +++++++-- .../AliExpress/CL-260/Configuration.h | 23 +++++++-- .../config/examples/Anet/A6/Configuration.h | 23 +++++++-- .../config/examples/Anet/A8/Configuration.h | 23 +++++++-- .../examples/Azteeg/X5GT/Configuration.h | 23 +++++++-- .../BIBO/TouchX/cyclops/Configuration.h | 23 +++++++-- .../BIBO/TouchX/default/Configuration.h | 23 +++++++-- .../examples/BQ/Hephestos/Configuration.h | 23 +++++++-- .../examples/BQ/Hephestos_2/Configuration.h | 23 +++++++-- .../config/examples/BQ/WITBOX/Configuration.h | 23 +++++++-- .../config/examples/Cartesio/Configuration.h | 23 +++++++-- .../examples/Creality/CR-10/Configuration.h | 23 +++++++-- .../examples/Creality/CR-10S/Configuration.h | 23 +++++++-- .../examples/Creality/Ender/Configuration.h | 23 +++++++-- .../src/config/examples/Felix/Configuration.h | 23 +++++++-- .../examples/Felix/DUAL/Configuration.h | 23 +++++++-- .../FolgerTech/i3-2020/Configuration.h | 23 +++++++-- .../examples/Geeetech/GT2560/Configuration.h | 23 +++++++-- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 23 +++++++-- .../Prusa i3 Pro B/bltouch/Configuration.h | 23 +++++++-- .../Prusa i3 Pro B/noprobe/Configuration.h | 23 +++++++-- .../examples/Infitary/i3-M508/Configuration.h | 23 +++++++-- .../examples/JGAurora/A5/Configuration.h | 23 +++++++-- .../examples/MakerParts/Configuration.h | 23 +++++++-- .../examples/Malyan/M150/Configuration.h | 23 +++++++-- .../examples/Malyan/M200/Configuration.h | 23 +++++++-- .../Micromake/C1/basic/Configuration.h | 23 +++++++-- .../Micromake/C1/enhanced/Configuration.h | 23 +++++++-- .../config/examples/Mks/Sbase/Configuration.h | 23 +++++++-- .../RepRapWorld/Megatronics/Configuration.h | 23 +++++++-- .../config/examples/RigidBot/Configuration.h | 23 +++++++-- .../src/config/examples/SCARA/Configuration.h | 23 +++++++-- .../config/examples/STM32F10/Configuration.h | 23 +++++++-- .../examples/Sanguinololu/Configuration.h | 23 +++++++-- .../config/examples/TheBorg/Configuration.h | 23 +++++++-- .../config/examples/TinyBoy2/Configuration.h | 23 +++++++-- .../config/examples/Tronxy/X1/Configuration.h | 23 +++++++-- .../examples/Tronxy/X5S/Configuration.h | 23 +++++++-- .../examples/Tronxy/XY100/Configuration.h | 23 +++++++-- .../UltiMachine/Archim2/Configuration.h | 23 +++++++-- .../examples/Velleman/K8200/Configuration.h | 23 +++++++-- .../examples/Velleman/K8400/Configuration.h | 23 +++++++-- .../Velleman/K8400/Dual-head/Configuration.h | 23 +++++++-- .../Wanhao/Duplicator 6/Configuration.h | 23 +++++++-- .../examples/adafruit/ST7565/Configuration.h | 23 +++++++-- .../FLSUN/auto_calibrate/Configuration.h | 23 +++++++-- .../delta/FLSUN/kossel/Configuration.h | 23 +++++++-- .../delta/FLSUN/kossel_mini/Configuration.h | 23 +++++++-- .../examples/delta/generic/Configuration.h | 23 +++++++-- .../delta/kossel_mini/Configuration.h | 23 +++++++-- .../examples/delta/kossel_pro/Configuration.h | 23 +++++++-- .../examples/delta/kossel_xl/Configuration.h | 23 +++++++-- .../examples/gCreate/gMax1.5+/Configuration.h | 23 +++++++-- .../config/examples/makibox/Configuration.h | 23 +++++++-- .../examples/stm32f103ret6/Configuration.h | 23 +++++++-- .../examples/tvrrug/Round2/Configuration.h | 23 +++++++-- .../src/config/examples/wt150/Configuration.h | 23 +++++++-- Marlin/src/inc/Conditionals_post.h | 24 +++++++++ Marlin/src/inc/SanityCheck.h | 33 ++++++++++++- Marlin/src/module/endstops.cpp | 26 ++++++++++ 66 files changed, 1182 insertions(+), 325 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 906765503..cf24356c6 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/HAL/HAL_LPC1768/arduino.cpp b/Marlin/src/HAL/HAL_LPC1768/arduino.cpp index 94026f27a..7a027f6d2 100644 --- a/Marlin/src/HAL/HAL_LPC1768/arduino.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/arduino.cpp @@ -71,7 +71,7 @@ extern "C" void delay(const int msec) { // IO functions // As defined by Arduino INPUT(0x0), OUPUT(0x1), INPUT_PULLUP(0x2) -void pinMode(pin_t pin, uint8_t mode) { +void pinMode(const pin_t pin, const uint8_t mode) { if (!VALID_PIN(pin)) return; PINSEL_CFG_Type config = { LPC1768_PIN_PORT(pin), @@ -79,23 +79,24 @@ void pinMode(pin_t pin, uint8_t mode) { PINSEL_FUNC_0, PINSEL_PINMODE_TRISTATE, PINSEL_PINMODE_NORMAL }; - switch(mode) { - case INPUT: - LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin)); - PINSEL_ConfigPin(&config); - break; - case OUTPUT: - LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR |= LPC_PIN(LPC1768_PIN_PIN(pin)); - PINSEL_ConfigPin(&config); - break; - case INPUT_PULLUP: - LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin)); - config.Pinmode = PINSEL_PINMODE_PULLUP; - PINSEL_ConfigPin(&config); - break; - default: - break; + switch (mode) { + case INPUT: + LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin)); + break; + case OUTPUT: + LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR |= LPC_PIN(LPC1768_PIN_PIN(pin)); + break; + case INPUT_PULLUP: + LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin)); + config.Pinmode = PINSEL_PINMODE_PULLUP; + break; + case INPUT_PULLDOWN: + LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin)); + config.Pinmode = PINSEL_PINMODE_PULLDOWN; + break; + default: return; } + PINSEL_ConfigPin(&config); } void digitalWrite(pin_t pin, uint8_t pin_status) { @@ -108,13 +109,13 @@ void digitalWrite(pin_t pin, uint8_t pin_status) { pinMode(pin, OUTPUT); // Set pin mode on every write (Arduino version does this) - /** - * Must be done AFTER the output state is set. Doing this before will cause a - * 2uS glitch if writing a "1". - * - * When the Port Direction bit is written to a "1" the output is immediately set - * to the value of the FIOPIN bit which is "0" because of power up defaults. - */ + /** + * Must be done AFTER the output state is set. Doing this before will cause a + * 2uS glitch if writing a "1". + * + * When the Port Direction bit is written to a "1" the output is immediately set + * to the value of the FIOPIN bit which is "0" because of power up defaults. + */ } bool digitalRead(pin_t pin) { diff --git a/Marlin/src/HAL/HAL_LPC1768/fastio.h b/Marlin/src/HAL/HAL_LPC1768/fastio.h index d86cc81cc..513b77601 100644 --- a/Marlin/src/HAL/HAL_LPC1768/fastio.h +++ b/Marlin/src/HAL/HAL_LPC1768/fastio.h @@ -85,6 +85,9 @@ bool useable_hardware_PWM(pin_t pin); /// set pin as input with pullup mode #define _PULLUP(IO, v) (pinMode(IO, (v!=LOW ? INPUT_PULLUP : INPUT))) +/// set pin as input with pulldown mode +#define _PULLDOWN(IO, v) (pinMode(IO, (v!=LOW ? INPUT_PULLDOWN : INPUT))) + // hg42: all pins can be input or output (I hope) // hg42: undefined pins create compile error (IO, is no pin) // hg42: currently not used, but was used by pinsDebug @@ -119,6 +122,8 @@ bool useable_hardware_PWM(pin_t pin); #define SET_INPUT(IO) _SET_INPUT(IO) /// set pin as input with pullup wrapper #define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0) +/// set pin as input with pulldown wrapper +#define SET_INPUT_PULLDOWN(IO) do{ _SET_INPUT(IO); _PULLDOWN(IO, HIGH); }while(0) /// set pin as output wrapper - reads the pin and sets the output to that value #define SET_OUTPUT(IO) do{ _WRITE(IO, _READ(IO)); _SET_OUTPUT(IO); }while(0) diff --git a/Marlin/src/HAL/HAL_LPC1768/include/Arduino.h b/Marlin/src/HAL/HAL_LPC1768/include/Arduino.h index f823df947..7ce8ff1b4 100644 --- a/Marlin/src/HAL/HAL_LPC1768/include/Arduino.h +++ b/Marlin/src/HAL/HAL_LPC1768/include/Arduino.h @@ -31,9 +31,10 @@ #define HIGH 0x01 #define LOW 0x00 -#define INPUT 0x00 -#define OUTPUT 0x01 -#define INPUT_PULLUP 0x02 +#define INPUT 0x00 +#define OUTPUT 0x01 +#define INPUT_PULLUP 0x02 +#define INPUT_PULLDOWN 0x03 #define LSBFIRST 0 #define MSBFIRST 1 @@ -104,7 +105,7 @@ void delayMicroseconds(unsigned long); uint32_t millis(); //IO functions -void pinMode(pin_t, uint8_t); +void pinMode(const pin_t, const uint8_t); void digitalWrite(pin_t, uint8_t); bool digitalRead(pin_t); void analogWrite(pin_t, int); diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp index b53c2e35c..a85e3a6fd 100644 --- a/Marlin/src/Marlin.cpp +++ b/Marlin/src/Marlin.cpp @@ -219,8 +219,10 @@ void setup_killpin() { #if ENABLED(FILAMENT_RUNOUT_SENSOR) void setup_filrunoutpin() { - #if ENABLED(ENDSTOPPULLUP_FIL_RUNOUT) + #if ENABLED(FIL_RUNOUT_PULLUP) SET_INPUT_PULLUP(FIL_RUNOUT_PIN); + #elif ENABLED(FIL_RUNOUT_PULLDOWN) + SET_INPUT_PULLDOWN(FIL_RUNOUT_PIN); #else SET_INPUT(FIL_RUNOUT_PIN); #endif diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h index 906765503..cf24356c6 100644 --- a/Marlin/src/config/default/Configuration.h +++ b/Marlin/src/config/default/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index bbf0174cb..8ad981a95 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -520,11 +520,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -534,6 +533,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -870,7 +882,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index 629a2373a..dd908e6fa 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -500,11 +500,10 @@ #define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index 2a4365b24..ca87da4a5 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -520,11 +520,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -534,6 +533,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -960,7 +972,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index 21f94a4ae..351f09aa2 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -507,11 +507,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -521,6 +520,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -857,7 +869,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index 52e66bdc2..fa5b0ed41 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -500,11 +500,10 @@ #define USE_YMAX_PLUG #define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index b8712d93e..98ae18886 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -500,11 +500,10 @@ #define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index 0c3da3940..a58d23228 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -500,11 +500,10 @@ #define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index 4cd46632b..70f744fb6 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -488,11 +488,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -502,6 +501,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -838,7 +850,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 548fb91f5..2a25829f5 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -501,11 +501,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -515,6 +514,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -851,7 +863,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index b1c2d0d8b..bb9d6624a 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -488,11 +488,10 @@ #define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -502,6 +501,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -838,7 +850,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index 0f2e7a3ad..2f1fc9c25 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -499,11 +499,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -513,6 +512,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -849,7 +861,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index 6b6f25d94..5dbc3f98d 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -510,11 +510,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -524,6 +523,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -860,7 +872,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h index aa846fa80..b41a6af23 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -491,11 +491,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -505,6 +504,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -841,7 +853,8 @@ #define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor #endif diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration.h b/Marlin/src/config/examples/Creality/Ender/Configuration.h index 527ebb9d1..17187c627 100644 --- a/Marlin/src/config/examples/Creality/Ender/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender/Configuration.h @@ -495,11 +495,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -509,6 +508,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -845,7 +857,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index ebdd8aa22..e55d05b0e 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -481,11 +481,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -495,6 +494,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -832,7 +844,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 05179bb0c..1514fdbb4 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -481,11 +481,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -495,6 +494,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -832,7 +844,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index 35f1f8585..2057a118c 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -506,11 +506,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -520,6 +519,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -856,7 +868,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index afac31e5f..491e1a977 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -515,11 +515,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -529,6 +528,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -865,7 +877,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 5202fa01c..892fb0f5a 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index ecd3f4a1e..26dc453de 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -506,11 +506,10 @@ //#define USE_YMAX_PLUG #define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -520,6 +519,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -857,7 +869,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 02120488a..12a35d0bd 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -506,11 +506,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -520,6 +519,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -856,7 +868,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index 555e22fe1..b301879d0 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -504,11 +504,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -518,6 +517,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -854,7 +866,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 077733ca9..9a5ad02f2 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -512,11 +512,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -526,6 +525,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -862,7 +874,8 @@ #define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index f37476dbe..1658ee8c9 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -520,11 +520,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually #define ENDSTOPPULLUP_XMAX #define ENDSTOPPULLUP_YMAX #define ENDSTOPPULLUP_ZMAX @@ -534,6 +533,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -870,7 +882,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index e6a2e35d9..a6f7d8ab6 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -508,11 +508,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -522,6 +521,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -874,7 +886,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h index 6a2e6a0a8..eb7d363e3 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h @@ -499,11 +499,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -513,6 +512,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -849,7 +861,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index d85e0aa30..2553a0941 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -854,7 +866,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index afbfc8832..f9bdfffcf 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -854,7 +866,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index fcad29805..3367e58f4 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index e065e0f2d..ac21eafc0 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index 376c94977..5f159e736 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -496,11 +496,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -510,6 +509,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -848,7 +860,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index 617ecb5b9..2a484eec2 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -512,11 +512,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX #define ENDSTOPPULLUP_ZMAX // open pin, inverted @@ -526,6 +525,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -862,7 +874,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index affc79667..cbe8f9132 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -502,11 +502,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -516,6 +515,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -853,7 +865,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index 239cf8d65..f71e8afb0 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -881,7 +893,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h index 8ade00345..d9e02d302 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration.h +++ b/Marlin/src/config/examples/TheBorg/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index a858ab9c2..200ba46e4 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -551,11 +551,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -565,6 +564,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -906,7 +918,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index e74543b69..4094ce9c9 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -491,11 +491,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -505,6 +504,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -841,7 +853,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index 38a6a31d1..c3a702c08 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h index 86d3223fa..05c9d5c5f 100644 --- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h @@ -511,11 +511,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -525,6 +524,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -861,7 +873,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index af734b063..7ba022e95 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -491,11 +491,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -505,6 +504,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -841,7 +853,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index ecc36d717..3bda3d916 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -530,11 +530,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -544,6 +543,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -880,7 +892,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index 5e6092b26..af8cb486c 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index 2e0c436c2..b89dc34f4 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h index 0887fc401..7c0b4ebf3 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -501,11 +501,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -515,6 +514,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -851,7 +863,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index fb48c5ba5..694114a06 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -500,11 +500,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -514,6 +513,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -850,7 +862,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 7ab6cb2e9..566999d9f 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -579,11 +579,10 @@ #define USE_YMAX_PLUG #define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -593,6 +592,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -980,7 +992,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h index 99e455f7b..b0337664a 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h @@ -570,11 +570,10 @@ #define USE_YMAX_PLUG #define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -584,6 +583,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -971,7 +983,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 787212c40..4d77c1230 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -579,11 +579,10 @@ #define USE_YMAX_PLUG #define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -593,6 +592,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -980,7 +992,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index c67f53f39..d68180fdb 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -569,11 +569,10 @@ #define USE_YMAX_PLUG #define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -583,6 +582,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -967,7 +979,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 6ebfebf86..37861cf34 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -569,11 +569,10 @@ #define USE_YMAX_PLUG #define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -583,6 +582,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -970,7 +982,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index f9e738e40..92baecf1d 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -555,11 +555,10 @@ #define USE_YMAX_PLUG #define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -569,6 +568,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -970,7 +982,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index 4ed978125..69072e41e 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -573,11 +573,10 @@ #define USE_YMAX_PLUG #define USE_ZMAX_PLUG -// coarse Endstop Settings -//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually #define ENDSTOPPULLUP_XMAX #define ENDSTOPPULLUP_YMAX #define ENDSTOPPULLUP_ZMAX @@ -587,6 +586,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -979,7 +991,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index 9053afb07..1ec4ef5d0 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -513,11 +513,10 @@ #define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -527,6 +526,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -864,7 +876,8 @@ #define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index d063628ea..7cd89708b 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -503,11 +503,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -517,6 +516,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -853,7 +865,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index cde085afb..efe907f37 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -502,11 +502,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -516,6 +515,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. @@ -851,7 +863,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index 07d0dcd91..ef95a091b 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -489,11 +489,10 @@ //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG -// coarse Endstop Settings -#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -503,6 +502,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -845,7 +857,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index 3520789b1..677d44c9e 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -505,11 +505,10 @@ //#define USE_YMAX_PLUG #define USE_ZMAX_PLUG -// coarse Endstop Settings -//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors - +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) - // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX @@ -519,6 +518,19 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -855,7 +867,8 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. #define FILAMENT_RUNOUT_SCRIPT "M600" #endif diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 7d088dbd5..8ad079d3a 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -616,6 +616,30 @@ #endif #endif +/** + * Set ENDSTOPPULLDOWNS for active endstop switches + */ +#if ENABLED(ENDSTOPPULLDOWNS) + #if ENABLED(USE_XMAX_PLUG) + #define ENDSTOPPULLDOWN_XMAX + #endif + #if ENABLED(USE_YMAX_PLUG) + #define ENDSTOPPULLDOWN_YMAX + #endif + #if ENABLED(USE_ZMAX_PLUG) + #define ENDSTOPPULLDOWN_ZMAX + #endif + #if ENABLED(USE_XMIN_PLUG) + #define ENDSTOPPULLDOWN_XMIN + #endif + #if ENABLED(USE_YMIN_PLUG) + #define ENDSTOPPULLDOWN_YMIN + #endif + #if ENABLED(USE_ZMIN_PLUG) + #define ENDSTOPPULLDOWN_ZMIN + #endif +#endif + /** * Shorthand for pin tests, used wherever needed */ diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 03ace21c3..f5bd21ec2 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -78,7 +78,9 @@ #elif defined(SDEXTRASLOW) #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead." #elif defined(FILAMENT_SENSOR) - #error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead." + #error "FILAMENT_SENSOR is now FILAMENT_WIDTH_SENSOR. Please update your configuration." +#elif defined(ENDSTOPPULLUP_FIL_RUNOUT) + #error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULLUP. Please update your configuration." #elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS) #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead." #elif defined(LANGUAGE_INCLUDE) @@ -323,6 +325,35 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #endif #endif +#if !defined(TARGET_LPC1768) && ( \ + ENABLED(ENDSTOPPULLDOWNS) \ + || ENABLED(ENDSTOPPULLDOWN_XMAX) \ + || ENABLED(ENDSTOPPULLDOWN_YMAX) \ + || ENABLED(ENDSTOPPULLDOWN_ZMAX) \ + || ENABLED(ENDSTOPPULLDOWN_XMIN) \ + || ENABLED(ENDSTOPPULLDOWN_YMIN) \ + || ENABLED(ENDSTOPPULLDOWN_ZMIN) ) + #error "PULLDOWN pin mode is not available on the selected board." +#endif + +#if ENABLED(ENDSTOPPULLUPS) && ENABLED(ENDSTOPPULLDOWNS) + #error "Enable only one of ENDSTOPPULLUPS or ENDSTOPPULLDOWNS." +#elif ENABLED(FIL_RUNOUT_PULLUP) && ENABLED(FIL_RUNOUT_PULLDOWN) + #error "Enable only one of FIL_RUNOUT_PULLUP or FIL_RUNOUT_PULLDOWN." +#elif ENABLED(ENDSTOPPULLUP_XMAX) && ENABLED(ENDSTOPPULLDOWN_XMAX) + #error "Enable only one of ENDSTOPPULLUP_X_MAX or ENDSTOPPULLDOWN_X_MAX." +#elif ENABLED(ENDSTOPPULLUP_YMAX) && ENABLED(ENDSTOPPULLDOWN_YMAX) + #error "Enable only one of ENDSTOPPULLUP_Y_MAX or ENDSTOPPULLDOWN_Y_MAX." +#elif ENABLED(ENDSTOPPULLUP_ZMAX) && ENABLED(ENDSTOPPULLDOWN_ZMAX) + #error "Enable only one of ENDSTOPPULLUP_Z_MAX or ENDSTOPPULLDOWN_Z_MAX." +#elif ENABLED(ENDSTOPPULLUP_XMIN) && ENABLED(ENDSTOPPULLDOWN_XMIN) + #error "Enable only one of ENDSTOPPULLUP_X_MIN or ENDSTOPPULLDOWN_X_MIN." +#elif ENABLED(ENDSTOPPULLUP_YMIN) && ENABLED(ENDSTOPPULLDOWN_YMIN) + #error "Enable only one of ENDSTOPPULLUP_Y_MIN or ENDSTOPPULLDOWN_Y_MIN." +#elif ENABLED(ENDSTOPPULLUP_ZMIN) && ENABLED(ENDSTOPPULLDOWN_ZMIN) + #error "Enable only one of ENDSTOPPULLUP_Z_MIN or ENDSTOPPULLDOWN_Z_MIN." +#endif + /** * Progress Bar */ diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp index c57c71ff8..9b424a95c 100644 --- a/Marlin/src/module/endstops.cpp +++ b/Marlin/src/module/endstops.cpp @@ -73,6 +73,8 @@ void Endstops::init() { #if HAS_X_MIN #if ENABLED(ENDSTOPPULLUP_XMIN) SET_INPUT_PULLUP(X_MIN_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_XMIN) + SET_INPUT_PULLDOWN(X_MIN_PIN); #else SET_INPUT(X_MIN_PIN); #endif @@ -81,6 +83,8 @@ void Endstops::init() { #if HAS_X2_MIN #if ENABLED(ENDSTOPPULLUP_XMIN) SET_INPUT_PULLUP(X2_MIN_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_XMIN) + SET_INPUT_PULLDOWN(X2_MIN_PIN); #else SET_INPUT(X2_MIN_PIN); #endif @@ -89,6 +93,8 @@ void Endstops::init() { #if HAS_Y_MIN #if ENABLED(ENDSTOPPULLUP_YMIN) SET_INPUT_PULLUP(Y_MIN_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_YMIN) + SET_INPUT_PULLDOWN(Y_MIN_PIN); #else SET_INPUT(Y_MIN_PIN); #endif @@ -97,6 +103,8 @@ void Endstops::init() { #if HAS_Y2_MIN #if ENABLED(ENDSTOPPULLUP_YMIN) SET_INPUT_PULLUP(Y2_MIN_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_YMIN) + SET_INPUT_PULLDOWN(Y2_MIN_PIN); #else SET_INPUT(Y2_MIN_PIN); #endif @@ -105,6 +113,8 @@ void Endstops::init() { #if HAS_Z_MIN #if ENABLED(ENDSTOPPULLUP_ZMIN) SET_INPUT_PULLUP(Z_MIN_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_ZMIN) + SET_INPUT_PULLDOWN(Z_MIN_PIN); #else SET_INPUT(Z_MIN_PIN); #endif @@ -113,6 +123,8 @@ void Endstops::init() { #if HAS_Z2_MIN #if ENABLED(ENDSTOPPULLUP_ZMIN) SET_INPUT_PULLUP(Z2_MIN_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_ZMIN) + SET_INPUT_PULLDOWN(Z2_MIN_PIN); #else SET_INPUT(Z2_MIN_PIN); #endif @@ -121,6 +133,8 @@ void Endstops::init() { #if HAS_X_MAX #if ENABLED(ENDSTOPPULLUP_XMAX) SET_INPUT_PULLUP(X_MAX_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_XMAX) + SET_INPUT_PULLDOWN(X_MAX_PIN); #else SET_INPUT(X_MAX_PIN); #endif @@ -129,6 +143,8 @@ void Endstops::init() { #if HAS_X2_MAX #if ENABLED(ENDSTOPPULLUP_XMAX) SET_INPUT_PULLUP(X2_MAX_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_XMAX) + SET_INPUT_PULLDOWN(X2_MAX_PIN); #else SET_INPUT(X2_MAX_PIN); #endif @@ -137,6 +153,8 @@ void Endstops::init() { #if HAS_Y_MAX #if ENABLED(ENDSTOPPULLUP_YMAX) SET_INPUT_PULLUP(Y_MAX_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_YMAX) + SET_INPUT_PULLDOWN(Y_MAX_PIN); #else SET_INPUT(Y_MAX_PIN); #endif @@ -145,6 +163,8 @@ void Endstops::init() { #if HAS_Y2_MAX #if ENABLED(ENDSTOPPULLUP_YMAX) SET_INPUT_PULLUP(Y2_MAX_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_YMAX) + SET_INPUT_PULLDOWN(Y2_MAX_PIN); #else SET_INPUT(Y2_MAX_PIN); #endif @@ -153,6 +173,8 @@ void Endstops::init() { #if HAS_Z_MAX #if ENABLED(ENDSTOPPULLUP_ZMAX) SET_INPUT_PULLUP(Z_MAX_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_ZMAX) + SET_INPUT_PULLDOWN(Z_MAX_PIN); #else SET_INPUT(Z_MAX_PIN); #endif @@ -161,6 +183,8 @@ void Endstops::init() { #if HAS_Z2_MAX #if ENABLED(ENDSTOPPULLUP_ZMAX) SET_INPUT_PULLUP(Z2_MAX_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_ZMAX) + SET_INPUT_PULLDOWN(Z2_MAX_PIN); #else SET_INPUT(Z2_MAX_PIN); #endif @@ -169,6 +193,8 @@ void Endstops::init() { #if ENABLED(Z_MIN_PROBE_ENDSTOP) #if ENABLED(ENDSTOPPULLUP_ZMIN_PROBE) SET_INPUT_PULLUP(Z_MIN_PROBE_PIN); + #elif ENABLED(ENDSTOPPULLDOWN_ZMIN_PROBE) + SET_INPUT_PULLDOWN(Z_MIN_PROBE_PIN); #else SET_INPUT(Z_MIN_PROBE_PIN); #endif From 3af988a7f3646309927066d5a8c48551a8720b0a Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 18 Feb 2018 19:28:40 -0600 Subject: [PATCH 03/32] Add sensorless homing delay to home_z_safely Based on #9705 --- Marlin/src/gcode/calibrate/G28.cpp | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp index de6bcd321..88f021b26 100644 --- a/Marlin/src/gcode/calibrate/G28.cpp +++ b/Marlin/src/gcode/calibrate/G28.cpp @@ -106,6 +106,10 @@ active_extruder_parked = false; #endif + #if ENABLED(SENSORLESS_HOMING) + safe_delay(500); // Short delay needed to settle + #endif + do_blocking_move_to_xy(destination[X_AXIS], destination[Y_AXIS]); HOMEAXIS(Z); } From c241da32e839f035ca8a7887675ff54d545c38b9 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 18 Feb 2018 21:11:35 -0600 Subject: [PATCH 04/32] stepper.h parity with 1.1.x --- Marlin/src/module/stepper.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Marlin/src/module/stepper.h b/Marlin/src/module/stepper.h index c9ee8f1a6..0a051d615 100644 --- a/Marlin/src/module/stepper.h +++ b/Marlin/src/module/stepper.h @@ -112,10 +112,10 @@ class Stepper { #endif // LIN_ADVANCE static long acceleration_time, deceleration_time; - //unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate; - static hal_timer_t acc_step_rate; // needed for deceleration start point static uint8_t step_loops, step_loops_nominal; - static hal_timer_t OCR1A_nominal; + + static hal_timer_t OCR1A_nominal, + acc_step_rate; // needed for deceleration start point static volatile long endstops_trigsteps[XYZ]; static volatile long endstops_stepsTotal, endstops_stepsDone; From 3d1692d1fdbb0a11eaeb3ae04e285a9a407d744e Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 18 Feb 2018 22:08:18 -0600 Subject: [PATCH 05/32] Fix X2 enable with X_DUAL_STEPPER_DRIVERS From #9286 --- Marlin/src/module/stepper.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp index 7e59702b2..d82985877 100644 --- a/Marlin/src/module/stepper.cpp +++ b/Marlin/src/module/stepper.cpp @@ -995,7 +995,7 @@ void Stepper::init() { #if HAS_X_ENABLE X_ENABLE_INIT; if (!X_ENABLE_ON) X_ENABLE_WRITE(HIGH); - #if ENABLED(DUAL_X_CARRIAGE) && HAS_X2_ENABLE + #if (ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS)) && HAS_X2_ENABLE X2_ENABLE_INIT; if (!X_ENABLE_ON) X2_ENABLE_WRITE(HIGH); #endif From 0106c3e476fc85ad8d460ae8ff2592e8ea906f91 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 19 Feb 2018 06:52:03 -0600 Subject: [PATCH 06/32] Style tweak in MarlinSerialUSB_Due.h --- Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h index 4d9299da3..bfa2ccedc 100644 --- a/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h +++ b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h @@ -59,10 +59,10 @@ public: FORCE_INLINE static int rxMaxEnqueued() { return 0; } #endif - static FORCE_INLINE void write(const char* str) { while (*str) write(*str++); } - static FORCE_INLINE void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); } - static FORCE_INLINE void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); } - static FORCE_INLINE void print(const char* str) { write(str); } + FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); } + FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); } + FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); } + FORCE_INLINE static void print(const char* str) { write(str); } static void print(char, int = 0); static void print(unsigned char, int = 0); From d3ca82d8c24b94a0073d5839ddca6569a6d013a1 Mon Sep 17 00:00:00 2001 From: Studiodyne Date: Sun, 18 Feb 2018 09:42:09 +0100 Subject: [PATCH 07/32] Support for multiple filament runout sensors --- Marlin/Configuration.h | 11 ++++--- Marlin/src/Marlin.cpp | 22 ++----------- Marlin/src/feature/pause.cpp | 2 +- Marlin/src/feature/runout.cpp | 38 ++++++++++++++++------ Marlin/src/feature/runout.h | 51 ++++++++++++++++++++++++++++-- Marlin/src/inc/Conditionals_post.h | 1 - Marlin/src/inc/SanityCheck.h | 14 ++++++-- 7 files changed, 98 insertions(+), 41 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index cf24356c6..d84508183 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp index a85e3a6fd..671fd0070 100644 --- a/Marlin/src/Marlin.cpp +++ b/Marlin/src/Marlin.cpp @@ -216,20 +216,6 @@ void setup_killpin() { #endif } -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - - void setup_filrunoutpin() { - #if ENABLED(FIL_RUNOUT_PULLUP) - SET_INPUT_PULLUP(FIL_RUNOUT_PIN); - #elif ENABLED(FIL_RUNOUT_PULLDOWN) - SET_INPUT_PULLDOWN(FIL_RUNOUT_PIN); - #else - SET_INPUT(FIL_RUNOUT_PIN); - #endif - } - -#endif - void setup_powerhold() { #if HAS_SUICIDE OUT_WRITE(SUICIDE_PIN, HIGH); @@ -336,11 +322,7 @@ void disable_all_steppers() { void manage_inactivity(bool ignore_stepper_queue/*=false*/) { #if ENABLED(FILAMENT_RUNOUT_SENSOR) - if ((IS_SD_PRINTING || print_job_timer.isRunning()) - && READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING - && thermalManager.targetHotEnoughToExtrude(active_extruder) - ) - handle_filament_runout(); + runout.run(); #endif if (commands_in_queue < BUFSIZE) get_available_commands(); @@ -661,7 +643,7 @@ void setup() { #endif #if ENABLED(FILAMENT_RUNOUT_SENSOR) - setup_filrunoutpin(); + runout.setup(); #endif setup_killpin(); diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp index 63c55fc91..846b370c9 100644 --- a/Marlin/src/feature/pause.cpp +++ b/Marlin/src/feature/pause.cpp @@ -500,7 +500,7 @@ void resume_print(const float &load_length/*=0*/, const float &purge_length/*=AD planner.set_e_position_mm(destination[E_AXIS] = current_position[E_AXIS] = resume_position[E_AXIS]); #if ENABLED(FILAMENT_RUNOUT_SENSOR) - filament_ran_out = false; + runout.reset(); #endif #if ENABLED(ULTIPANEL) diff --git a/Marlin/src/feature/runout.cpp b/Marlin/src/feature/runout.cpp index 8bc90947e..18f0eadeb 100644 --- a/Marlin/src/feature/runout.cpp +++ b/Marlin/src/feature/runout.cpp @@ -24,21 +24,39 @@ * feature/runout.cpp - Runout sensor support */ -#include "../inc/MarlinConfig.h" +#include "../inc/MarlinConfigPre.h" #if ENABLED(FILAMENT_RUNOUT_SENSOR) -#include "../module/stepper.h" -#include "../gcode/queue.h" +#include "runout.h" -bool filament_ran_out = false; +FilamentRunoutSensor runout; -void handle_filament_runout() { - if (!filament_ran_out) { - filament_ran_out = true; - enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT)); - stepper.synchronize(); - } +bool FilamentRunoutSensor::filament_ran_out; // = false; + +void FilamentRunoutSensor::setup() { + + #if ENABLED(FIL_RUNOUT_PULLUP) + #define INIT_RUNOUT_PIN(P) SET_INPUT_PULLUP(P) + #elif ENABLED(FIL_RUNOUT_PULLDOWN) + #define INIT_RUNOUT_PIN(P) SET_INPUT_PULLDOWN(P) + #else + #define INIT_RUNOUT_PIN(P) SET_INPUT(P) + #endif + + INIT_RUNOUT_PIN(FIL_RUNOUT_PIN); + #if NUM_RUNOUT_SENSORS > 1 + INIT_RUNOUT_PIN(FIL_RUNOUT2_PIN); + #if NUM_RUNOUT_SENSORS > 2 + INIT_RUNOUT_PIN(FIL_RUNOUT3_PIN); + #if NUM_RUNOUT_SENSORS > 3 + INIT_RUNOUT_PIN(FIL_RUNOUT4_PIN); + #if NUM_RUNOUT_SENSORS > 4 + INIT_RUNOUT_PIN(FIL_RUNOUT5_PIN); + #endif + #endif + #endif + #endif } #endif // FILAMENT_RUNOUT_SENSOR diff --git a/Marlin/src/feature/runout.h b/Marlin/src/feature/runout.h index 36e5b086c..3c9d31211 100644 --- a/Marlin/src/feature/runout.h +++ b/Marlin/src/feature/runout.h @@ -27,8 +27,55 @@ #ifndef _RUNOUT_H_ #define _RUNOUT_H_ -extern bool filament_ran_out; +#include "../sd/cardreader.h" +#include "../module/printcounter.h" +#include "../module/stepper.h" +#include "../gcode/queue.h" -void handle_filament_runout(); +#include "../inc/MarlinConfig.h" + +class FilamentRunoutSensor { + + FilamentRunoutSensor() {} + + static bool filament_ran_out; + static void setup(); + + FORCE_INLINE static reset() { filament_ran_out = false; } + + FORCE_INLINE static bool check() { + #if NUM_RUNOUT_SENSORS < 2 + // A single sensor applying to all extruders + return READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING; + #else + // Read the sensor for the active extruder + switch (active_extruder) { + case 0: return READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING; + case 1: return READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING; + #if NUM_RUNOUT_SENSORS > 2 + case 2: return READ(FIL_RUNOUT3_PIN) == FIL_RUNOUT_INVERTING; + #if NUM_RUNOUT_SENSORS > 3 + case 3: return READ(FIL_RUNOUT4_PIN) == FIL_RUNOUT_INVERTING; + #if NUM_RUNOUT_SENSORS > 4 + case 4: return READ(FIL_RUNOUT5_PIN) == FIL_RUNOUT_INVERTING; + #endif + #endif + #endif + } + #endif + return false; + } + + FORCE_INLINE static void run() { + if ((IS_SD_PRINTING || print_job_timer.isRunning()) && check() && !filament_ran_out) { + filament_ran_out = true; + enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT)); + stepper.synchronize(); + } + } + +}; + +extern FilamentRunoutSensor runout; #endif // _RUNOUT_H_ diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 8ad079d3a..6ea54dd42 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -792,7 +792,6 @@ // Sensors #define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH)) -#define HAS_FIL_RUNOUT (PIN_EXISTS(FIL_RUNOUT)) // User Interface #define HAS_HOME (PIN_EXISTS(HOME)) diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index f5bd21ec2..ea78be3ce 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -429,11 +429,21 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #endif /** - * Filament Runout needs a pin and either SD Support or Auto print start detection + * Filament Runout needs one or more pins and either SD Support or Auto print start detection */ #if ENABLED(FILAMENT_RUNOUT_SENSOR) - #if !HAS_FIL_RUNOUT + #if !PIN_EXISTS(FIL_RUNOUT) #error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN." + #elif NUM_RUNOUT_SENSORS > E_STEPPERS + #error "NUM_RUNOUT_SENSORS cannot exceed the number of E steppers." + #elif NUM_RUNOUT_SENSORS > 1 && !PIN_EXISTS(FIL_RUNOUT2) + #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 1 requires FIL_RUNOUT2_PIN." + #elif NUM_RUNOUT_SENSORS > 2 && !PIN_EXISTS(FIL_RUNOUT3) + #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 2 requires FIL_RUNOUT3_PIN." + #elif NUM_RUNOUT_SENSORS > 3 && !PIN_EXISTS(FIL_RUNOUT4) + #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 3 requires FIL_RUNOUT4_PIN." + #elif NUM_RUNOUT_SENSORS > 4 && !PIN_EXISTS(FIL_RUNOUT5) + #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 4 requires FIL_RUNOUT5_PIN." #elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART) #error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART." #elif DISABLED(ADVANCED_PAUSE_FEATURE) From 8733d5a2968a4b35f417f8b6aaccaa07c5bfe26d Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 18 Feb 2018 18:44:02 -0600 Subject: [PATCH 08/32] Add NUM_RUNOUT_SENSORS to example configs --- Marlin/src/config/default/Configuration.h | 11 ++++++----- .../config/examples/AlephObjects/TAZ4/Configuration.h | 11 ++++++----- .../config/examples/AliExpress/CL-260/Configuration.h | 11 ++++++----- Marlin/src/config/examples/Anet/A6/Configuration.h | 11 ++++++----- Marlin/src/config/examples/Anet/A8/Configuration.h | 11 ++++++----- .../src/config/examples/Azteeg/X5GT/Configuration.h | 11 ++++++----- .../examples/BIBO/TouchX/cyclops/Configuration.h | 11 ++++++----- .../examples/BIBO/TouchX/default/Configuration.h | 11 ++++++----- .../src/config/examples/BQ/Hephestos/Configuration.h | 11 ++++++----- .../config/examples/BQ/Hephestos_2/Configuration.h | 11 ++++++----- Marlin/src/config/examples/BQ/WITBOX/Configuration.h | 11 ++++++----- Marlin/src/config/examples/Cartesio/Configuration.h | 11 ++++++----- .../config/examples/Creality/CR-10/Configuration.h | 11 ++++++----- .../config/examples/Creality/CR-10S/Configuration.h | 11 ++++++----- .../config/examples/Creality/Ender/Configuration.h | 11 ++++++----- Marlin/src/config/examples/Felix/Configuration.h | 11 ++++++----- Marlin/src/config/examples/Felix/DUAL/Configuration.h | 11 ++++++----- .../examples/FolgerTech/i3-2020/Configuration.h | 11 ++++++----- .../config/examples/Geeetech/GT2560/Configuration.h | 11 ++++++----- .../examples/Geeetech/I3_Pro_X-GT2560/Configuration.h | 11 ++++++----- .../Geeetech/Prusa i3 Pro B/bltouch/Configuration.h | 11 ++++++----- .../Geeetech/Prusa i3 Pro B/noprobe/Configuration.h | 11 ++++++----- .../config/examples/Infitary/i3-M508/Configuration.h | 11 ++++++----- .../src/config/examples/JGAurora/A5/Configuration.h | 11 ++++++----- Marlin/src/config/examples/MakerParts/Configuration.h | 11 ++++++----- .../src/config/examples/Malyan/M150/Configuration.h | 11 ++++++----- .../src/config/examples/Malyan/M200/Configuration.h | 11 ++++++----- .../examples/Micromake/C1/basic/Configuration.h | 11 ++++++----- .../examples/Micromake/C1/enhanced/Configuration.h | 11 ++++++----- Marlin/src/config/examples/Mks/Sbase/Configuration.h | 11 ++++++----- .../examples/RepRapWorld/Megatronics/Configuration.h | 11 ++++++----- Marlin/src/config/examples/RigidBot/Configuration.h | 11 ++++++----- Marlin/src/config/examples/SCARA/Configuration.h | 11 ++++++----- Marlin/src/config/examples/STM32F10/Configuration.h | 11 ++++++----- .../src/config/examples/Sanguinololu/Configuration.h | 11 ++++++----- Marlin/src/config/examples/TheBorg/Configuration.h | 11 ++++++----- Marlin/src/config/examples/TinyBoy2/Configuration.h | 11 ++++++----- Marlin/src/config/examples/Tronxy/X1/Configuration.h | 11 ++++++----- Marlin/src/config/examples/Tronxy/X5S/Configuration.h | 11 ++++++----- .../src/config/examples/Tronxy/XY100/Configuration.h | 11 ++++++----- .../examples/UltiMachine/Archim2/Configuration.h | 11 ++++++----- .../config/examples/Velleman/K8200/Configuration.h | 11 ++++++----- .../config/examples/Velleman/K8400/Configuration.h | 11 ++++++----- .../examples/Velleman/K8400/Dual-head/Configuration.h | 11 ++++++----- .../examples/Wanhao/Duplicator 6/Configuration.h | 11 ++++++----- .../config/examples/adafruit/ST7565/Configuration.h | 11 ++++++----- .../delta/FLSUN/auto_calibrate/Configuration.h | 11 ++++++----- .../examples/delta/FLSUN/kossel/Configuration.h | 11 ++++++----- .../examples/delta/FLSUN/kossel_mini/Configuration.h | 11 ++++++----- .../src/config/examples/delta/generic/Configuration.h | 11 ++++++----- .../config/examples/delta/kossel_mini/Configuration.h | 11 ++++++----- .../config/examples/delta/kossel_pro/Configuration.h | 11 ++++++----- .../config/examples/delta/kossel_xl/Configuration.h | 11 ++++++----- .../config/examples/gCreate/gMax1.5+/Configuration.h | 11 ++++++----- Marlin/src/config/examples/makibox/Configuration.h | 11 ++++++----- .../src/config/examples/stm32f103ret6/Configuration.h | 11 ++++++----- .../src/config/examples/tvrrug/Round2/Configuration.h | 11 ++++++----- Marlin/src/config/examples/wt150/Configuration.h | 11 ++++++----- 58 files changed, 348 insertions(+), 290 deletions(-) diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h index cf24356c6..d84508183 100644 --- a/Marlin/src/config/default/Configuration.h +++ b/Marlin/src/config/default/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index 8ad981a95..259bc9b0a 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -872,15 +872,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index dd908e6fa..b12a37b31 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index ca87da4a5..6f30b0880 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -962,15 +962,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index 351f09aa2..eee53cb82 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -859,15 +859,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index fa5b0ed41..683b9d36d 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index 98ae18886..862f4bf75 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -852,15 +852,16 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index a58d23228..6e294fee9 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -852,15 +852,16 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index 70f744fb6..5c73cc64f 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -840,15 +840,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 2a25829f5..6763927e0 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -853,15 +853,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index bb9d6624a..96b9354cf 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -840,15 +840,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index 2f1fc9c25..0f6165307 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -851,15 +851,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index 5dbc3f98d..9e0ea51b9 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -862,15 +862,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h index b41a6af23..1e67d5336 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -843,15 +843,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ #define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration.h b/Marlin/src/config/examples/Creality/Ender/Configuration.h index 17187c627..21e905523 100644 --- a/Marlin/src/config/examples/Creality/Ender/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender/Configuration.h @@ -847,15 +847,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index e55d05b0e..982cf1048 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -834,15 +834,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 1514fdbb4..6d272b102 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -834,15 +834,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index 2057a118c..07b7ff6dc 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -858,15 +858,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index 491e1a977..3bd3a447c 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -867,15 +867,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 892fb0f5a..336f593cf 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 26dc453de..4610eed81 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -859,15 +859,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 12a35d0bd..fa9981a81 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -858,15 +858,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index b301879d0..94f2b58d5 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -856,15 +856,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 9a5ad02f2..9e901321d 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -864,15 +864,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ #define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index 1658ee8c9..a109d92c1 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -872,15 +872,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index a6f7d8ab6..cc42b84e8 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -876,15 +876,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h index eb7d363e3..162ec96db 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h @@ -851,15 +851,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index 2553a0941..c053009c0 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -856,15 +856,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index f9bdfffcf..e9212fcf0 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -856,15 +856,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index 3367e58f4..b4c2a674c 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index ac21eafc0..b604f4761 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index 5f159e736..7433cdc6e 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -850,15 +850,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index 2a484eec2..1c5696ef2 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -864,15 +864,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index cbe8f9132..4dd22ef97 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -855,15 +855,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index f71e8afb0..f1dc4b6cb 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -883,15 +883,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h index d9e02d302..613ebb7db 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration.h +++ b/Marlin/src/config/examples/TheBorg/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index 200ba46e4..07f0998a7 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -908,15 +908,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index 4094ce9c9..139920e9e 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -843,15 +843,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index c3a702c08..f4e989c21 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h index 05c9d5c5f..07e893afb 100644 --- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h @@ -863,15 +863,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index 7ba022e95..9a69b5783 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -843,15 +843,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index 3bda3d916..59826b14e 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -882,15 +882,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index af8cb486c..266273d6c 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index b89dc34f4..57296c67a 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h index 7c0b4ebf3..fa61ffa65 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -853,15 +853,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index 694114a06..728d776bc 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -852,15 +852,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 566999d9f..393c2981b 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -982,15 +982,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h index b0337664a..9765f9c3c 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h @@ -973,15 +973,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 4d77c1230..b663e7f01 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -982,15 +982,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index d68180fdb..71ed4b458 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -969,15 +969,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 37861cf34..7c89f6ff1 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -972,15 +972,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index 92baecf1d..df704315a 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -972,15 +972,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index 69072e41e..b5d5c8214 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -981,15 +981,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index 1ec4ef5d0..9254aaaae 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -866,15 +866,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ #define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index 7cd89708b..d48b62bd1 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -855,15 +855,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index efe907f37..cbca3d83e 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -853,15 +853,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index ef95a091b..8324590d5 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -847,15 +847,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index 677d44c9e..8db6c63c4 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -857,15 +857,16 @@ #endif /** - * Filament Runout Sensor - * A mechanical or opto endstop is used to check for the presence of filament. + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. * - * RAMPS-based boards use SERVO3_PIN. - * For other boards you may need to define FIL_RUNOUT_PIN. - * By default the firmware assumes HIGH = has filament, LOW = ran out + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. */ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. From a74cece6d0f4dcd24cfabd7b7a531a6c5e9966b6 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 19 Feb 2018 08:07:08 -0600 Subject: [PATCH 09/32] CR-10 Bootscreen From @plainpylut in #9660 --- .../examples/Creality/CR-10/_Bootscreen.h | 101 ++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 Marlin/src/config/examples/Creality/CR-10/_Bootscreen.h diff --git a/Marlin/src/config/examples/Creality/CR-10/_Bootscreen.h b/Marlin/src/config/examples/Creality/CR-10/_Bootscreen.h new file mode 100644 index 000000000..9c8586790 --- /dev/null +++ b/Marlin/src/config/examples/Creality/CR-10/_Bootscreen.h @@ -0,0 +1,101 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, + B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, + B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, + B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, + B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, + B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, + B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, + B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00000000,B11000000,B00111111,B11111000,B11111111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, + B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B10000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, + B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11100000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, + B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11100111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 +}; From b3deadd89888735c0ee91f730d268dc0b6fba4d6 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 19 Feb 2018 08:36:43 -0600 Subject: [PATCH 10/32] Don't raise FIX_MOUNTED_PROBE on stow Reference #9336 --- Marlin/src/module/probe.cpp | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index 3bfd0cb90..5d9073497 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -374,8 +374,15 @@ bool set_probe_deployed(const bool deploy) { if (endstops.z_probe_enabled == deploy) return false; - // Make room for probe - do_probe_raise(_Z_CLEARANCE_DEPLOY_PROBE); + // Fix-mounted probe should only raise for deploy + #if ENABLED(FIX_MOUNTED_PROBE) + #define RAISE_COND deploy + #else + #define RAISE_COND true + #endif + + // Make room for probe to deploy (or stow) + if (RAISE_COND) do_probe_raise(_Z_CLEARANCE_DEPLOY_PROBE); #if ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY) #if ENABLED(Z_PROBE_SLED) From 25e3e62354591d1d5f461967e6521b9f52902394 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 19 Feb 2018 10:09:08 -0600 Subject: [PATCH 11/32] Null-terminate lcd_status_message --- Marlin/src/lcd/ultralcd.cpp | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index c4b6756d0..7f3f9022a 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -5172,6 +5172,7 @@ void lcd_update() { inline void pad_message_string() { uint8_t i = 0, j = 0; char c; + lcd_status_message[MAX_MESSAGE_LENGTH] = '\0'; while ((c = lcd_status_message[i]) && j < LCD_WIDTH) { if (PRINTABLE(c)) j++; i++; @@ -5221,7 +5222,7 @@ bool lcd_hasstatus() { return (lcd_status_message[0] != '\0'); } void lcd_setstatus(const char * const message, const bool persist) { if (lcd_status_message_level > 0) return; - strncpy(lcd_status_message, message, COUNT(lcd_status_message) - 1); + strncpy(lcd_status_message, message, MAX_MESSAGE_LENGTH); lcd_finishstatus(persist); } @@ -5229,7 +5230,7 @@ void lcd_setstatusPGM(const char * const message, int8_t level) { if (level < 0) level = lcd_status_message_level = 0; if (level < lcd_status_message_level) return; lcd_status_message_level = level; - strncpy_P(lcd_status_message, message, COUNT(lcd_status_message) - 1); + strncpy_P(lcd_status_message, message, MAX_MESSAGE_LENGTH); lcd_finishstatus(level > 0); } @@ -5238,7 +5239,7 @@ void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...) { lcd_status_message_level = level; va_list args; va_start(args, fmt); - vsnprintf_P(lcd_status_message, COUNT(lcd_status_message) - 1, fmt, args); + vsnprintf_P(lcd_status_message, MAX_MESSAGE_LENGTH, fmt, args); va_end(args); lcd_finishstatus(level > 0); } From d4e4fe40e0ec9013c0a1fbe8781a0802b6b3f9d3 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 19 Feb 2018 10:11:11 -0600 Subject: [PATCH 12/32] Add SENSORLESS_HOMING delay to quick_home_xy Fix #9471 --- Marlin/src/gcode/calibrate/G28.cpp | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp index 88f021b26..853d28c79 100644 --- a/Marlin/src/gcode/calibrate/G28.cpp +++ b/Marlin/src/gcode/calibrate/G28.cpp @@ -61,6 +61,9 @@ do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * home_dir(Y_AXIS), fr_mm_s); endstops.hit_on_purpose(); // clear endstop hit flags current_position[X_AXIS] = current_position[Y_AXIS] = 0.0; + #if ENABLED(SENSORLESS_HOMING) + safe_delay(500); // Short delay needed to settle + #endif } #endif // QUICK_HOME From c4ec01d59ba987a8de660a1c2b400012ad6cc885 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 19 Feb 2018 10:59:23 -0600 Subject: [PATCH 13/32] Conditionals for SWITCHING_EXTRUDER In reference to #5367. SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2. --- Marlin/src/inc/Conditionals_LCD.h | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 0524d202a..5cec44b00 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -421,18 +421,28 @@ #define HOTEND_INDEX e #endif -#if ENABLED(SWITCHING_EXTRUDER) || ENABLED(MIXING_EXTRUDER) // Unified E axis - #if ENABLED(MIXING_EXTRUDER) - #define E_STEPPERS MIXING_STEPPERS +#if ENABLED(SWITCHING_EXTRUDER) // One stepper for every two EXTRUDERS + #if EXTRUDERS > 4 + #define E_STEPPERS 3 + #define E_MANUAL 3 + #define TOOL_E_INDEX current_block->active_extruder + #elif EXTRUDERS > 2 + #define E_STEPPERS 2 + #define E_MANUAL 2 + #define TOOL_E_INDEX current_block->active_extruder #else - #define E_STEPPERS 1 // One E stepper + #define E_STEPPERS 1 + #define TOOL_E_INDEX 0 #endif - #define E_MANUAL 1 - #define TOOL_E_INDEX 0 + #define E_MANUAL E_STEPPERS +#elif ENABLED(MIXING_EXTRUDER) + #define E_STEPPERS MIXING_STEPPERS + #define E_MANUAL 1 + #define TOOL_E_INDEX 0 #else - #define E_STEPPERS EXTRUDERS - #define E_MANUAL EXTRUDERS - #define TOOL_E_INDEX current_block->active_extruder + #define E_STEPPERS EXTRUDERS + #define E_MANUAL EXTRUDERS + #define TOOL_E_INDEX current_block->active_extruder #endif /** From fc460fff941963a055862cc9299cc60fb5551d61 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 19 Feb 2018 11:12:42 -0600 Subject: [PATCH 14/32] Extend menu items for SWITCHING_EXTRUDER Reference #5367 --- Marlin/src/lcd/ultralcd.cpp | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index 7f3f9022a..a5b82fcad 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -3107,11 +3107,36 @@ void kill_screen(const char* lcd_msg) { else MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); - #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(DUAL_X_CARRIAGE) + #if ENABLED(SWITCHING_EXTRUDER) + + #if EXTRUDERS == 4 + switch (active_extruder) { + case 0: MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); break; + case 1: MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); break; + case 2: MENU_ITEM(gcode, MSG_SELECT " " MSG_E4, PSTR("T3")); break; + case 3: MENU_ITEM(gcode, MSG_SELECT " " MSG_E3, PSTR("T2")); break; + } + #elif EXTRUDERS == 3 + if (active_extruder < 2) { + if (active_extruder) + MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); + else + MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); + } + #else + if (active_extruder) + MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); + else + MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); + #endif + + #elif ENABLED(DUAL_X_CARRIAGE) + if (active_extruder) MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); else MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); + #endif MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_get_e_amount); From 73cd34b121023feb9cff4faec505138013a6b232 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 19 Feb 2018 16:12:04 -0600 Subject: [PATCH 15/32] Finish AUTO_POWER_CONTROL implementation Followup to #9503 --- Marlin/src/Marlin.cpp | 7 +++++++ Marlin/src/module/planner.cpp | 13 +++++++++++++ 2 files changed, 20 insertions(+) diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp index 671fd0070..ddfb0232d 100644 --- a/Marlin/src/Marlin.cpp +++ b/Marlin/src/Marlin.cpp @@ -272,6 +272,9 @@ void quickstop_stepper() { } void enable_all_steppers() { + #if ENABLED(AUTO_POWER_CONTROL) + powerManager.power_on(); + #endif enable_X(); enable_Y(); enable_Z(); @@ -411,6 +414,10 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) { controllerfan_update(); // Check if fan should be turned on to cool stepper drivers down #endif + #if ENABLED(AUTO_POWER_CONTROL) + powerManager.check(); + #endif + #if ENABLED(EXTRUDER_RUNOUT_PREVENT) if (thermalManager.degHotend(active_extruder) > EXTRUDER_RUNOUT_MINTEMP && ELAPSED(ms, gcode.previous_cmd_ms + (EXTRUDER_RUNOUT_SECONDS) * 1000UL) diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index 8d01afad7..e06b0f43f 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -84,6 +84,10 @@ #include "../feature/mixing.h" #endif +#if ENABLED(AUTO_POWER_CONTROL) + #include "../feature/power.h" +#endif + Planner planner; // public: @@ -860,6 +864,11 @@ void Planner::_buffer_steps(const int32_t (&target)[ABCE], float fr_mm_s, const block->active_extruder = extruder; + #if ENABLED(AUTO_POWER_CONTROL) + if (block->steps[X_AXIS] || block->steps[Y_AXIS] || block->steps[Z_AXIS]) + powerManager.power_on(); + #endif + //enable active axes #if CORE_IS_XY if (block->steps[A_AXIS] || block->steps[B_AXIS]) { @@ -892,6 +901,10 @@ void Planner::_buffer_steps(const int32_t (&target)[ABCE], float fr_mm_s, const // Enable extruder(s) if (esteps) { + #if ENABLED(AUTO_POWER_CONTROL) + powerManager.power_on(); + #endif + #if ENABLED(DISABLE_INACTIVE_EXTRUDER) // Enable only the selected extruder #define DISABLE_IDLE_E(N) if (!g_uc_extruder_last_move[N]) disable_E##N(); From 47d529aac517c7678d39a378e64db97f181214b0 Mon Sep 17 00:00:00 2001 From: Bob-the-Kuhn Date: Mon, 19 Feb 2018 17:39:40 -0600 Subject: [PATCH 16/32] move #include --- Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp index bc1e8bc16..58d99e594 100644 --- a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp +++ b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp @@ -24,7 +24,6 @@ // file u8g_dev_st7920_128x64_HAL.cpp for the HAL version. #include "../../inc/MarlinConfig.h" -#include #if ENABLED(U8GLIB_ST7920) @@ -41,6 +40,8 @@ #define LCD_PIXEL_WIDTH 128 #define LCD_PIXEL_HEIGHT 64 +#include + //set optimization so ARDUINO optimizes this file #pragma GCC optimize (3) From a810e585dbcf2978b70436d6f6baf87e4f982a0b Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 20 Feb 2018 03:09:21 -0600 Subject: [PATCH 17/32] Drop HAL_timer_set_count --- Marlin/src/HAL/HAL_AVR/HAL_AVR.h | 1 - Marlin/src/HAL/HAL_DUE/HAL_timers_Due.h | 5 ----- Marlin/src/HAL/HAL_LPC1768/HAL_timers.h | 7 ------- Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h | 1 - Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.cpp | 4 ---- Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.h | 5 ----- Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h | 7 ------- 7 files changed, 30 deletions(-) diff --git a/Marlin/src/HAL/HAL_AVR/HAL_AVR.h b/Marlin/src/HAL/HAL_AVR/HAL_AVR.h index 7174e7a06..33143a7fa 100644 --- a/Marlin/src/HAL/HAL_AVR/HAL_AVR.h +++ b/Marlin/src/HAL/HAL_AVR/HAL_AVR.h @@ -149,7 +149,6 @@ extern "C" { #define _CAT(a, ...) a ## __VA_ARGS__ #define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare) #define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer) -#define HAL_timer_set_count(timer, count) (_CAT(TIMER_COUNTER_, timer) = count) #define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer) #define HAL_timer_isr_prologue(timer_num) diff --git a/Marlin/src/HAL/HAL_DUE/HAL_timers_Due.h b/Marlin/src/HAL/HAL_DUE/HAL_timers_Due.h index 97de5f5e8..6abcab7cb 100644 --- a/Marlin/src/HAL/HAL_DUE/HAL_timers_Due.h +++ b/Marlin/src/HAL/HAL_DUE/HAL_timers_Due.h @@ -101,11 +101,6 @@ FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) { return pConfig->pTimerRegs->TC_CHANNEL[pConfig->channel].TC_RC; } -FORCE_INLINE static void HAL_timer_set_count(const uint8_t timer_num, const hal_timer_t count) { - const tTimerConfig * const pConfig = &TimerConfig[timer_num]; - pConfig->pTimerRegs->TC_CHANNEL[pConfig->channel].TC_CV = count; -} - FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) { const tTimerConfig * const pConfig = &TimerConfig[timer_num]; return pConfig->pTimerRegs->TC_CHANNEL[pConfig->channel].TC_CV; diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h b/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h index 9db411d79..5627a7d2d 100644 --- a/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h +++ b/Marlin/src/HAL/HAL_LPC1768/HAL_timers.h @@ -110,13 +110,6 @@ FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) { return 0; } -FORCE_INLINE static void HAL_timer_set_count(const uint8_t timer_num, const hal_timer_t count) { - switch (timer_num) { - case 0: LPC_TIM0->TC = count; break; - case 1: LPC_TIM1->TC = count; break; - } -} - FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) { switch (timer_num) { case 0: return LPC_TIM0->TC; diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h index 88aa3f460..271571bbc 100644 --- a/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h +++ b/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h @@ -83,7 +83,6 @@ typedef uint16_t hal_timer_t; #define DISABLE_TEMPERATURE_INTERRUPT() timer_disable_irq(TEMP_TIMER_DEV, TEMP_TIMER_CHAN) #define HAL_timer_get_count(timer_num) timer_get_count(TIMER_DEV(timer_num)) -#define HAL_timer_set_count(timer_num, count) timer_set_count(TIMER_DEV(timer_num), (uint16)count) #define HAL_ENABLE_ISRs() do { if (thermalManager.in_temp_isr)DISABLE_TEMPERATURE_INTERRUPT(); else ENABLE_TEMPERATURE_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT(); } while(0) diff --git a/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.cpp b/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.cpp index e1a1ec9dd..d239e49dd 100644 --- a/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.cpp +++ b/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.cpp @@ -121,10 +121,6 @@ void HAL_timer_set_compare(const uint8_t timer_num, const uint32_t compare) { __HAL_TIM_SetAutoreload(&timerConfig[timer_num].timerdef, compare); } -void HAL_timer_set_count(const uint8_t timer_num, const uint32_t count) { - __HAL_TIM_SetAutoreload(&timerConfig[timer_num].timerdef, count); -} - void HAL_timer_enable_interrupt(const uint8_t timer_num) { HAL_NVIC_EnableIRQ(timerConfig[timer_num].IRQ_Id); } diff --git a/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.h b/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.h index bd5950c28..059fc2258 100644 --- a/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.h +++ b/Marlin/src/HAL/HAL_STM32F7/HAL_timers_STM32F7.h @@ -95,11 +95,6 @@ void HAL_timer_set_compare(const uint8_t timer_num, const uint32_t compare); hal_timer_t HAL_timer_get_compare(const uint8_t timer_num); uint32_t HAL_timer_get_count(const uint8_t timer_num); -void HAL_timer_set_count(const uint8_t timer_num, const uint32_t count); // New -/*FORCE_INLINE static void HAL_timer_set_count(const uint8_t timer_num, const hal_timer_t count) { - // To do ?? -}*/ - void HAL_timer_isr_prologue(const uint8_t timer_num); #endif // _HAL_TIMERS_STM32F7_H diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h index c8360d5e8..94878ce04 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h +++ b/Marlin/src/HAL/HAL_TEENSY35_36/HAL_timers_Teensy.h @@ -95,13 +95,6 @@ FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) { return 0; } -FORCE_INLINE static void HAL_timer_set_count(const uint8_t timer_num, const hal_timer_t count) { - switch (timer_num) { - case 0: FTM0_CNT = count; - case 1: FTM1_CNT = count; - } -} - FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) { switch (timer_num) { case 0: return FTM0_CNT; From 12c5fdfdb52007f2ed2d76bd969efeae41dd2810 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 20 Feb 2018 03:09:53 -0600 Subject: [PATCH 18/32] Fix CYCLES_PER_MICROSECOND conflict on STM32F1 --- Marlin/src/core/macros.h | 2 +- Marlin/src/pins/pins_STM32F1R.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h index 0e498b8b4..c61e7d4cb 100644 --- a/Marlin/src/core/macros.h +++ b/Marlin/src/core/macros.h @@ -46,7 +46,7 @@ #define _O3 __attribute__((optimize("O3"))) // Clock speed factors -#ifndef CYCLES_PER_MICROSECOND +#if !defined(CYCLES_PER_MICROSECOND) && !defined(__STM32F1__) #define CYCLES_PER_MICROSECOND (F_CPU / 1000000L) // 16 or 20 on AVR #endif diff --git a/Marlin/src/pins/pins_STM32F1R.h b/Marlin/src/pins/pins_STM32F1R.h index acbc2f47c..6d7385311 100644 --- a/Marlin/src/pins/pins_STM32F1R.h +++ b/Marlin/src/pins/pins_STM32F1R.h @@ -20,7 +20,7 @@ * */ -#if !defined(__STM32F1__) +#ifndef __STM32F1__ #error "Oops! Make sure you have an STM32F1 board selected from the 'Tools -> Boards' menu." #endif From 4303f2e3773ac8c9923de05a4261f83397c411d7 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 20 Feb 2018 05:37:38 -0600 Subject: [PATCH 19/32] Fix MALYAN_LCD message bugs Fix #9711 Replacing #9731 --- Marlin/src/lcd/malyanlcd.cpp | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Marlin/src/lcd/malyanlcd.cpp b/Marlin/src/lcd/malyanlcd.cpp index b165fd4dc..b3b292de5 100644 --- a/Marlin/src/lcd/malyanlcd.cpp +++ b/Marlin/src/lcd/malyanlcd.cpp @@ -66,7 +66,7 @@ // This is based on longest sys command + a filename, plus some buffer // in case we encounter some data we don't recognize -// There is no evidence a line will ever be this long, but better safe than sory +// There is no evidence a line will ever be this long, but better safe than sorry #define MAX_CURLY_COMMAND (32 + LONG_FILENAME_LENGTH) * 2 // Track incoming command bytes from the LCD @@ -78,7 +78,7 @@ void write_to_lcd_P(const char * const message) { uint8_t message_length = min(strlen_P(message), sizeof(encoded_message)); for (uint8_t i = 0; i < message_length; i++) - encoded_message[i] = pgm_read_byte(message[i]) | 0x80; + encoded_message[i] = pgm_read_byte(&message[i]) | 0x80; LCD_SERIAL.Print::write(encoded_message, message_length); } @@ -431,7 +431,7 @@ void lcd_init() { write_to_lcd_P(PSTR("{SYS:STARTED}\r\n")); // send a version that says "unsupported" - write_to_lcd_P(PSTR("{VER:66}\r\n")); + write_to_lcd_P(PSTR("{VER:99}\r\n")); // No idea why it does this twice. write_to_lcd_P(PSTR("{SYS:STARTED}\r\n")); From 9f0907d40c16838daea7b42c2593ddaa760948f6 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 20 Feb 2018 06:45:11 -0600 Subject: [PATCH 20/32] Fix big edit font width calculation Fix #9685 --- Marlin/src/lcd/ultralcd_impl_DOGM.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Marlin/src/lcd/ultralcd_impl_DOGM.h b/Marlin/src/lcd/ultralcd_impl_DOGM.h index 0b7b4badf..38dd93528 100644 --- a/Marlin/src/lcd/ultralcd_impl_DOGM.h +++ b/Marlin/src/lcd/ultralcd_impl_DOGM.h @@ -937,7 +937,7 @@ static void lcd_implementation_status_screen() { uint8_t rows = (labellen > LCD_WIDTH - 2 - vallen) ? 2 : 1; #if ENABLED(USE_BIG_EDIT_FONT) - constexpr uint8_t lcd_width_edit = (LCD_WIDTH) / (DOG_CHAR_WIDTH_EDIT); + constexpr uint8_t lcd_width_edit = (LCD_PIXEL_WIDTH) / (DOG_CHAR_WIDTH_EDIT); uint8_t lcd_width, char_width; if (labellen <= lcd_width_edit - 1) { From 03b48df7bbe778a9c3a0f82d482af31ffa1965d5 Mon Sep 17 00:00:00 2001 From: Kevin Date: Tue, 20 Feb 2018 20:18:15 +0100 Subject: [PATCH 21/32] RADDS: Add EEPROM Size (#9737) needed for UBL --- Marlin/src/pins/pins_RADDS.h | 1 + 1 file changed, 1 insertion(+) diff --git a/Marlin/src/pins/pins_RADDS.h b/Marlin/src/pins/pins_RADDS.h index e4944ba48..4a41bb169 100644 --- a/Marlin/src/pins/pins_RADDS.h +++ b/Marlin/src/pins/pins_RADDS.h @@ -152,6 +152,7 @@ #define PS_ON_PIN 40 #define I2C_EEPROM +#define E2END 0x2000 // // LCD / Controller From 1d7f5be0ff3728637f2fc5fae2d3af719ae6901d Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 20 Feb 2018 19:44:02 -0600 Subject: [PATCH 22/32] quick_home_xy sensorless homing --- Marlin/src/gcode/calibrate/G28.cpp | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp index 853d28c79..5bc414b4e 100644 --- a/Marlin/src/gcode/calibrate/G28.cpp +++ b/Marlin/src/gcode/calibrate/G28.cpp @@ -35,6 +35,10 @@ #include "../../feature/bedlevel/bedlevel.h" #endif +#if ENABLED(SENSORLESS_HOMING) + #include "../../feature/tmc_util.h" +#endif + #include "../../lcd/ultralcd.h" #if ENABLED(QUICK_HOME) @@ -58,10 +62,26 @@ mlratio = mlx > mly ? mly / mlx : mlx / mly, fr_mm_s = min(homing_feedrate(X_AXIS), homing_feedrate(Y_AXIS)) * SQRT(sq(mlratio) + 1.0); + #if ENABLED(SENSORLESS_HOMING) + #if ENABLED(X_IS_TMC2130) && defined(X_HOMING_SENSITIVITY) + tmc_sensorless_homing(stepperX); + #endif + #if ENABLED(Y_IS_TMC2130) && defined(Y_HOMING_SENSITIVITY) + tmc_sensorless_homing(stepperY); + #endif + #endif + do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * home_dir(Y_AXIS), fr_mm_s); endstops.hit_on_purpose(); // clear endstop hit flags current_position[X_AXIS] = current_position[Y_AXIS] = 0.0; + #if ENABLED(SENSORLESS_HOMING) + #if ENABLED(X_IS_TMC2130) && defined(X_HOMING_SENSITIVITY) + tmc_sensorless_homing(stepperX, false); + #endif + #if ENABLED(Y_IS_TMC2130) && defined(Y_HOMING_SENSITIVITY) + tmc_sensorless_homing(stepperY, false); + #endif safe_delay(500); // Short delay needed to settle #endif } From 7d8c6b3f3c31e783eada6f2ac28da9f920233062 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 21 Feb 2018 00:46:25 -0600 Subject: [PATCH 23/32] Add 20x4 option for Sainsmart LCD (#9740) --- .travis.yml | 4 ++-- Marlin/Configuration.h | 7 ++++--- Marlin/src/config/default/Configuration.h | 7 ++++--- .../examples/AlephObjects/TAZ4/Configuration.h | 7 ++++--- .../examples/AliExpress/CL-260/Configuration.h | 7 ++++--- .../src/config/examples/Anet/A6/Configuration.h | 7 ++++--- .../src/config/examples/Anet/A8/Configuration.h | 7 ++++--- .../config/examples/Azteeg/X5GT/Configuration.h | 7 ++++--- .../examples/BIBO/TouchX/cyclops/Configuration.h | 7 ++++--- .../examples/BIBO/TouchX/default/Configuration.h | 7 ++++--- .../config/examples/BQ/Hephestos/Configuration.h | 7 ++++--- .../examples/BQ/Hephestos_2/Configuration.h | 7 ++++--- .../src/config/examples/BQ/WITBOX/Configuration.h | 7 ++++--- .../src/config/examples/Cartesio/Configuration.h | 7 ++++--- .../examples/Creality/CR-10/Configuration.h | 7 ++++--- .../examples/Creality/CR-10S/Configuration.h | 7 ++++--- .../examples/Creality/Ender/Configuration.h | 7 ++++--- Marlin/src/config/examples/Felix/Configuration.h | 7 ++++--- .../config/examples/Felix/DUAL/Configuration.h | 7 ++++--- .../examples/FolgerTech/i3-2020/Configuration.h | 7 ++++--- .../examples/Geeetech/GT2560/Configuration.h | 7 ++++--- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 7 ++++--- .../Prusa i3 Pro B/bltouch/Configuration.h | 7 ++++--- .../Prusa i3 Pro B/noprobe/Configuration.h | 7 ++++--- .../examples/Infitary/i3-M508/Configuration.h | 7 ++++--- .../config/examples/JGAurora/A5/Configuration.h | 7 ++++--- .../config/examples/MakerParts/Configuration.h | 7 ++++--- .../config/examples/Malyan/M150/Configuration.h | 7 ++++--- .../config/examples/Malyan/M200/Configuration.h | 7 ++++--- .../examples/Micromake/C1/basic/Configuration.h | 7 ++++--- .../Micromake/C1/enhanced/Configuration.h | 7 ++++--- .../src/config/examples/Mks/Sbase/Configuration.h | 7 ++++--- .../RepRapWorld/Megatronics/Configuration.h | 7 ++++--- .../src/config/examples/RigidBot/Configuration.h | 7 ++++--- Marlin/src/config/examples/SCARA/Configuration.h | 7 ++++--- .../src/config/examples/STM32F10/Configuration.h | 7 ++++--- .../config/examples/Sanguinololu/Configuration.h | 7 ++++--- .../src/config/examples/TheBorg/Configuration.h | 7 ++++--- .../src/config/examples/TinyBoy2/Configuration.h | 7 ++++--- .../src/config/examples/Tronxy/X1/Configuration.h | 7 ++++--- .../config/examples/Tronxy/X5S/Configuration.h | 7 ++++--- .../config/examples/Tronxy/XY100/Configuration.h | 7 ++++--- .../examples/UltiMachine/Archim2/Configuration.h | 7 ++++--- .../examples/Velleman/K8200/Configuration.h | 7 ++++--- .../examples/Velleman/K8400/Configuration.h | 7 ++++--- .../Velleman/K8400/Dual-head/Configuration.h | 7 ++++--- .../examples/Wanhao/Duplicator 6/Configuration.h | 7 ++++--- .../examples/adafruit/ST7565/Configuration.h | 7 ++++--- .../delta/FLSUN/auto_calibrate/Configuration.h | 7 ++++--- .../examples/delta/FLSUN/kossel/Configuration.h | 7 ++++--- .../delta/FLSUN/kossel_mini/Configuration.h | 7 ++++--- .../config/examples/delta/generic/Configuration.h | 7 ++++--- .../examples/delta/kossel_mini/Configuration.h | 7 ++++--- .../examples/delta/kossel_pro/Configuration.h | 7 ++++--- .../examples/delta/kossel_xl/Configuration.h | 7 ++++--- .../examples/gCreate/gMax1.5+/Configuration.h | 7 ++++--- .../src/config/examples/makibox/Configuration.h | 7 ++++--- .../config/examples/stm32f103ret6/Configuration.h | 7 ++++--- .../config/examples/tvrrug/Round2/Configuration.h | 7 ++++--- Marlin/src/config/examples/wt150/Configuration.h | 7 ++++--- Marlin/src/inc/Conditionals_LCD.h | 15 ++++++++------- Marlin/src/inc/SanityCheck.h | 7 ++++++- 62 files changed, 252 insertions(+), 187 deletions(-) diff --git a/.travis.yml b/.travis.yml index fd0a767e3..7c7e71252 100644 --- a/.travis.yml +++ b/.travis.yml @@ -258,10 +258,10 @@ script: # Most I2C configurations are failing at the moment because they require # a different Liquid Crystal library "LiquidTWI2". # - # LCD_I2C_SAINSMART_YWROBOT + # LCD_SAINSMART_I2C_1602 # #- restore_configs - #- opt_enable LCD_I2C_SAINSMART_YWROBOT + #- opt_enable LCD_SAINSMART_I2C_1602 #- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} # # LCD_I2C_PANELOLU2 diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index d84508183..a84512251 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h index d84508183..a84512251 100644 --- a/Marlin/src/config/default/Configuration.h +++ b/Marlin/src/config/default/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index 259bc9b0a..24404c855 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -1620,12 +1620,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index b12a37b31..59f42da89 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index 6f30b0880..e5875112d 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -1750,12 +1750,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index eee53cb82..b5b779f2a 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -1609,12 +1609,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index 683b9d36d..f0f67de4c 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index 862f4bf75..aff691977 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1600,12 +1600,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index 6e294fee9..de9283396 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -1600,12 +1600,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index 5c73cc64f..9a86568a6 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -1588,12 +1588,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 6763927e0..dfee5c6f4 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -1601,12 +1601,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index 96b9354cf..1a386a8b4 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -1588,12 +1588,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index 0f6165307..58eacfddd 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -1599,12 +1599,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index 9e0ea51b9..3a9834faf 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -1611,12 +1611,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h index 1e67d5336..5b5885370 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -1586,12 +1586,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration.h b/Marlin/src/config/examples/Creality/Ender/Configuration.h index 21e905523..9cda5a521 100644 --- a/Marlin/src/config/examples/Creality/Ender/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender/Configuration.h @@ -1586,12 +1586,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index 982cf1048..b46051d34 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -1582,12 +1582,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 6d272b102..4434d5b09 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -1582,12 +1582,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index 07b7ff6dc..e9f7718eb 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1606,12 +1606,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index 3bd3a447c..f9fc66e2d 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -1615,12 +1615,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 336f593cf..aa3e1608f 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 4610eed81..d9521fe21 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1604,12 +1604,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index fa9981a81..49065f85b 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1603,12 +1603,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index 94f2b58d5..9ad2cefbb 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -1604,12 +1604,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 9e901321d..1abc4f83b 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -1611,12 +1611,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index a109d92c1..4887deace 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -1620,12 +1620,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index cc42b84e8..b85ecbea1 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -1628,12 +1628,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h index 162ec96db..b676c2b1a 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h @@ -1599,12 +1599,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index c053009c0..de59235b2 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -1604,12 +1604,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index e9212fcf0..452b42ea7 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1604,12 +1604,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index b4c2a674c..ae8ffda0c 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -1602,12 +1602,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index b604f4761..348f4b82a 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index 7433cdc6e..4111793bc 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index 1c5696ef2..fcc2e7b41 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -1612,12 +1612,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index 4dd22ef97..4617dcee2 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -1603,12 +1603,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index f1dc4b6cb..538c60074 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -1631,12 +1631,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h index 613ebb7db..833715b1d 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration.h +++ b/Marlin/src/config/examples/TheBorg/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index 07f0998a7..77f2437ed 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -1656,12 +1656,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index 139920e9e..fe494ae70 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -1585,12 +1585,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index f4e989c21..465d717ab 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h index 07e893afb..dee561d48 100644 --- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h @@ -1611,12 +1611,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index 9a69b5783..286baaf57 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -1591,12 +1591,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index 59826b14e..5984775eb 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -1633,12 +1633,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index 266273d6c..a6303c8d7 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index 57296c67a..fb7a34cf5 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1594,12 +1594,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h index fa61ffa65..2c900678f 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1541,12 +1541,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index 728d776bc..6338967a3 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -1600,12 +1600,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 393c2981b..26ee3f825 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1734,12 +1734,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h index 9765f9c3c..a15e88575 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1719,12 +1719,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index b663e7f01..1a9ab7101 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1732,12 +1732,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index 71ed4b458..d10edb276 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -1721,12 +1721,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 7c89f6ff1..537ee791b 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -1724,12 +1724,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index df704315a..865505eb5 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -1724,12 +1724,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index b5d5c8214..dd9ff1c65 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -1733,12 +1733,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index 9254aaaae..ce18c8ab9 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1614,12 +1614,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index d48b62bd1..c6242369a 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -1603,12 +1603,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index cbca3d83e..f89b6b002 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -1601,12 +1601,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index 8324590d5..ac058e2d2 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -1595,12 +1595,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index 8db6c63c4..7c433eaed 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -1605,12 +1605,13 @@ //#define RA_CONTROL_PANEL // -// Sainsmart YW Robot (LCM1602) LCD Display +// Sainsmart (YwRobot) LCD Displays // -// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// These require F.Malpartida's LiquidCrystal_I2C library // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home // -//#define LCD_I2C_SAINSMART_YWROBOT +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 // // Generic LCM1602 LCD adapter diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 5cec44b00..6daff521b 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -205,14 +205,15 @@ * I2C PANELS */ -#if ENABLED(LCD_I2C_SAINSMART_YWROBOT) - - // Note: This controller requires F.Malpartida's LiquidCrystal_I2C library - // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +#if ENABLED(LCD_SAINSMART_I2C_1602) || ENABLED(LCD_SAINSMART_I2C_2004) #define LCD_I2C_TYPE_PCF8575 #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander - #define ULTIPANEL + + #if ENABLED(LCD_SAINSMART_I2C_2004) + #define LCD_WIDTH 20 + #define LCD_HEIGHT 4 + #endif #elif ENABLED(LCD_I2C_PANELOLU2) @@ -220,7 +221,7 @@ #define LCD_I2C_TYPE_MCP23017 #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD + #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (optional) #define ULTIPANEL #elif ENABLED(LCD_I2C_VIKI) @@ -235,7 +236,7 @@ */ #define LCD_I2C_TYPE_MCP23017 #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander - #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) + #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) #define ULTIPANEL #define ENCODER_FEEDRATE_DEADZONE 4 diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index ea78be3ce..e90c88c0a 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -241,6 +241,8 @@ #error "PROBE_DOUBLE_TOUCH is now MULTIPLE_PROBING. Please update your configuration." #elif defined(ANET_KEYPAD_LCD) #error "ANET_KEYPAD_LCD is now ZONESTAR_LCD. Please update your configuration." +#elif defined(LCD_I2C_SAINSMART_YWROBOT) + #error "LCD_I2C_SAINSMART_YWROBOT is now LCD_SAINSMART_I2C_(1602|2004). Please update your configuration." #elif defined(MEASURED_LOWER_LIMIT) || defined(MEASURED_UPPER_LIMIT) #error "MEASURED_(UPPER|LOWER)_LIMIT is now FILWIDTH_ERROR_MARGIN. Please update your configuration." #elif defined(AUTOMATIC_CURRENT_CONTROL) @@ -1447,7 +1449,10 @@ static_assert(1 >= 0 #if ENABLED(RA_CONTROL_PANEL) + 1 #endif - #if ENABLED(LCD_I2C_SAINSMART_YWROBOT) + #if ENABLED(LCD_SAINSMART_I2C_1602) + + 1 + #endif + #if ENABLED(LCD_SAINSMART_I2C_2004) + 1 #endif #if ENABLED(LCM1602) From d504bbbfa46bab8f3fed5b18e97ca94911d6b2b5 Mon Sep 17 00:00:00 2001 From: Roxy-3D Date: Wed, 21 Feb 2018 13:49:12 -0600 Subject: [PATCH 24/32] Fix botched check for being off the mesh... --- Marlin/src/feature/bedlevel/ubl/ubl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.h b/Marlin/src/feature/bedlevel/ubl/ubl.h index e6832bb2f..78bae7147 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl.h +++ b/Marlin/src/feature/bedlevel/ubl/ubl.h @@ -291,7 +291,7 @@ class unified_bed_leveling { * UBL_Z_RAISE_WHEN_OFF_MESH is specified, that value is returned. */ #ifdef UBL_Z_RAISE_WHEN_OFF_MESH - if (!WITHIN(rx0, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(ry0, 0, GRID_MAX_POINTS_Y - 1)) + if (!WITHIN(rx0, MESH_MIN_X, MESH_MAX_X) || !WITHIN(ry0, MESH_MIN_Y, MESH_MAX_Y)) return UBL_Z_RAISE_WHEN_OFF_MESH; #endif From 63bc6ade4fb225ae5f7b1fb8f8dc4ee8e1dde519 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 21 Feb 2018 14:25:35 -0600 Subject: [PATCH 25/32] Fix pinsDebug compile error --- Marlin/src/pins/pinsDebug_list.h | 260 +++++++++++++++---------------- 1 file changed, 128 insertions(+), 132 deletions(-) diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h index 19b3c5d30..bfa815038 100644 --- a/Marlin/src/pins/pinsDebug_list.h +++ b/Marlin/src/pins/pinsDebug_list.h @@ -27,81 +27,77 @@ // Pin lists 1.1.x and 2.0.x synchronized 2018-02-17 -#define PIN_EXISTS_ANALOG(PN) (PIN_EXISTS(PN) && PN##_PIN < NUM_ANALOG_INPUTS) -#define _EXISTS(PN) (defined(PN) && PN >= 0) -#define _EXISTS_ANALOG(PN) (_EXISTS(PN) && PN < NUM_ANALOG_INPUTS) +#line 31 // set __LINE__ to a known value for both passes -#line 0 // set __LINE__ to a known value for both passes - -#if _EXISTS_ANALOG(EXT_AUX_A0) +#if defined(EXT_AUX_A0) && EXT_AUX_A0 > 0 && EXT_AUX_A0 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A0) #endif -#if _EXISTS_ANALOG(EXT_AUX_A1) +#if defined(EXT_AUX_A1) && EXT_AUX_A1 > 0 && EXT_AUX_A1 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A1) #endif -#if _EXISTS_ANALOG(EXT_AUX_A2) +#if defined(EXT_AUX_A2) && EXT_AUX_A2 > 0 && EXT_AUX_A2 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A2) #endif -#if _EXISTS_ANALOG(EXT_AUX_A3) +#if defined(EXT_AUX_A3) && EXT_AUX_A3 > 0 && EXT_AUX_A3 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A3) #endif -#if _EXISTS_ANALOG(EXT_AUX_A4) +#if defined(EXT_AUX_A4) && EXT_AUX_A4 > 0 && EXT_AUX_A4 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A4) #endif -#if PIN_EXISTS_ANALOG(FILWIDTH) +#if PIN_EXISTS(FILWIDTH) && FILWIDTH_PIN >= 0 && FILWIDTH_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, FILWIDTH_PIN) #endif -#if PIN_EXISTS_ANALOG(MAIN_VOLTAGE_MEASURE) +#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) && MAIN_VOLTAGE_MEASURE_PIN >= 0 && MAIN_VOLTAGE_MEASURE_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, MAIN_VOLTAGE_MEASURE_PIN) #endif #if !defined(ARDUINO_ARCH_SAM) //TC1 & TC2 are macros in the SAM tool chain - #if _EXISTS_ANALOG(TC1) + #if defined(TC1) && TC1 > 0 && TC1 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TC1) #endif - #if _EXISTS_ANALOG(TC2) + #if defined(TC2) && TC2 > 0 && TC2 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TC2) #endif #endif -#if PIN_EXISTS_ANALOG(TEMP_0) +#if PIN_EXISTS(TEMP_0) && TEMP_0_PIN >= 0 && TEMP_0_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_0_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_1) +#if PIN_EXISTS(TEMP_1) && TEMP_1_PIN >= 0 && TEMP_1_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_1_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_2) +#if PIN_EXISTS(TEMP_2) && TEMP_2_PIN >= 0 && TEMP_2_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_2_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_3) +#if PIN_EXISTS(TEMP_3) && TEMP_3_PIN >= 0 && TEMP_3_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_3_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_4) +#if PIN_EXISTS(TEMP_4) && TEMP_4_PIN >= 0 && TEMP_4_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_4_PIN) #endif -#if _EXISTS(THERMO_CS2) +#if defined(THERMO_CS2) && THERMO_CS2 > 0 REPORT_NAME_DIGITAL(__LINE__, THERMO_CS2) #endif -#if PIN_EXISTS_ANALOG(TEMP_BED) +#if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN >= 0 && TEMP_BED_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_BED_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_CHAMBER) +#if PIN_EXISTS(TEMP_CHAMBER) && TEMP_CHAMBER_PIN >= 0 && TEMP_CHAMBER_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_CHAMBER_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_X) +#if PIN_EXISTS(TEMP_X) && TEMP_X_PIN >= 0 && TEMP_X_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_X_PIN) #endif -#if PIN_EXISTS_ANALOG(ADC_KEYPAD) +#if PIN_EXISTS(ADC_KEYPAD) && ADC_KEYPAD_PIN >= 0 && ADC_KEYPAD_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, ADC_KEYPAD_PIN) #endif -#if _EXISTS(__FD) +#if defined(__FD) && __FD > 0 REPORT_NAME_DIGITAL(__LINE__, __FD) #endif -#if _EXISTS(__FS) +#if defined(__FS) && __FS > 0 REPORT_NAME_DIGITAL(__LINE__, __FS) #endif -#if _EXISTS(__GD) +#if defined(__GD) && __GD > 0 REPORT_NAME_DIGITAL(__LINE__, __GD) #endif -#if _EXISTS(__GS) +#if defined(__GS) && __GS > 0 REPORT_NAME_DIGITAL(__LINE__, __GS) #endif #if PIN_EXISTS(AVR_MISO) @@ -122,43 +118,43 @@ #if PIN_EXISTS(BEEPER) REPORT_NAME_DIGITAL(__LINE__, BEEPER_PIN) #endif -#if _EXISTS(BTN_BACK) +#if defined(BTN_BACK) && BTN_BACK > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_BACK) #endif -#if _EXISTS(BTN_CENTER) +#if defined(BTN_CENTER) && BTN_CENTER > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_CENTER) #endif -#if _EXISTS(BTN_DOWN) +#if defined(BTN_DOWN) && BTN_DOWN > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_DOWN) #endif -#if _EXISTS(BTN_DWN) +#if defined(BTN_DWN) && BTN_DWN > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_DWN) #endif -#if _EXISTS(BTN_EN1) +#if defined(BTN_EN1) && BTN_EN1 > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_EN1) #endif -#if _EXISTS(BTN_EN2) +#if defined(BTN_EN2) && BTN_EN2 > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_EN2) #endif -#if _EXISTS(BTN_ENC) +#if defined(BTN_ENC) && BTN_ENC > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_ENC) #endif -#if _EXISTS(BTN_HOME) +#if defined(BTN_HOME) && BTN_HOME > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_HOME) #endif -#if _EXISTS(BTN_LEFT) +#if defined(BTN_LEFT) && BTN_LEFT > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_LEFT) #endif -#if _EXISTS(BTN_LFT) +#if defined(BTN_LFT) && BTN_LFT > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_LFT) #endif -#if _EXISTS(BTN_RIGHT) +#if defined(BTN_RIGHT) && BTN_RIGHT > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_RIGHT) #endif -#if _EXISTS(BTN_RT) +#if defined(BTN_RT) && BTN_RT > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_RT) #endif -#if _EXISTS(BTN_UP) +#if defined(BTN_UP) && BTN_UP > 0 REPORT_NAME_DIGITAL(__LINE__, BTN_UP) #endif #if PIN_EXISTS(CASE_LIGHT) @@ -173,55 +169,55 @@ #if PIN_EXISTS(CUTOFF_TEST) REPORT_NAME_DIGITAL(__LINE__, CUTOFF_TEST_PIN) #endif -#if _EXISTS(D57) +#if defined(D57) && D57 > 0 REPORT_NAME_DIGITAL(__LINE__, D57) #endif -#if _EXISTS(D58) +#if defined(D58) && D58 > 0 REPORT_NAME_DIGITAL(__LINE__, D58) #endif #if PIN_EXISTS(DAC_DISABLE) REPORT_NAME_DIGITAL(__LINE__, DAC_DISABLE_PIN) #endif -#if _EXISTS(DAC0_SYNC) +#if defined(DAC0_SYNC) && DAC0_SYNC > 0 REPORT_NAME_DIGITAL(__LINE__, DAC0_SYNC) #endif -#if _EXISTS(DAC1_SYNC) +#if defined(DAC1_SYNC) && DAC1_SYNC > 0 REPORT_NAME_DIGITAL(__LINE__, DAC1_SYNC) #endif #if PIN_EXISTS(DEBUG) REPORT_NAME_DIGITAL(__LINE__, DEBUG_PIN) #endif -#if _EXISTS(DIGIPOTS_I2C_SCL) +#if defined(DIGIPOTS_I2C_SCL) && DIGIPOTS_I2C_SCL > 0 REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SCL) #endif -#if _EXISTS(DIGIPOTS_I2C_SDA_E0) +#if defined(DIGIPOTS_I2C_SDA_E0) && DIGIPOTS_I2C_SDA_E0 > 0 REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SDA_E0) #endif -#if _EXISTS(DIGIPOTS_I2C_SDA_E1) +#if defined(DIGIPOTS_I2C_SDA_E1) && DIGIPOTS_I2C_SDA_E1 > 0 REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SDA_E1) #endif -#if _EXISTS(DIGIPOTS_I2C_SDA_X) +#if defined(DIGIPOTS_I2C_SDA_X) && DIGIPOTS_I2C_SDA_X > 0 REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SDA_X) #endif -#if _EXISTS(DIGIPOTS_I2C_SDA_Y) +#if defined(DIGIPOTS_I2C_SDA_Y) && DIGIPOTS_I2C_SDA_Y > 0 REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SDA_Y) #endif -#if _EXISTS(DIGIPOTS_I2C_SDA_Z) +#if defined(DIGIPOTS_I2C_SDA_Z) && DIGIPOTS_I2C_SDA_Z > 0 REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SDA_Z) #endif #if PIN_EXISTS(DIGIPOTSS) REPORT_NAME_DIGITAL(__LINE__, DIGIPOTSS_PIN) #endif -#if _EXISTS(DOGLCD_A0) +#if defined(DOGLCD_A0) && DOGLCD_A0 > 0 REPORT_NAME_DIGITAL(__LINE__, DOGLCD_A0) #endif -#if _EXISTS(DOGLCD_CS) +#if defined(DOGLCD_CS) && DOGLCD_CS > 0 REPORT_NAME_DIGITAL(__LINE__, DOGLCD_CS) #endif -#if _EXISTS(DOGLCD_MOSI) +#if defined(DOGLCD_MOSI) && DOGLCD_MOSI > 0 REPORT_NAME_DIGITAL(__LINE__, DOGLCD_MOSI) #endif -#if _EXISTS(DOGLCD_SCK) +#if defined(DOGLCD_SCK) && DOGLCD_SCK > 0 REPORT_NAME_DIGITAL(__LINE__, DOGLCD_SCK) #endif #if PIN_EXISTS(E_MUX0) @@ -350,100 +346,100 @@ #if PIN_EXISTS(E4_STEP) REPORT_NAME_DIGITAL(__LINE__, E4_STEP_PIN) #endif -#if _EXISTS(ENET_CRS) +#if defined(ENET_CRS) && ENET_CRS > 0 REPORT_NAME_DIGITAL(__LINE__, ENET_CRS) #endif -#if _EXISTS(ENET_MDIO) +#if defined(ENET_MDIO) && ENET_MDIO > 0 REPORT_NAME_DIGITAL(__LINE__, ENET_MDIO) #endif -#if _EXISTS(ENET_MOC) +#if defined(ENET_MOC) && ENET_MOC > 0 REPORT_NAME_DIGITAL(__LINE__, ENET_MOC) #endif -#if _EXISTS(ENET_RX_ER) +#if defined(ENET_RX_ER) && ENET_RX_ER > 0 REPORT_NAME_DIGITAL(__LINE__, ENET_RX_ER) #endif -#if _EXISTS(ENET_RXD0) +#if defined(ENET_RXD0) && ENET_RXD0 > 0 REPORT_NAME_DIGITAL(__LINE__, ENET_RXD0) #endif -#if _EXISTS(ENET_RXD1) +#if defined(ENET_RXD1) && ENET_RXD1 > 0 REPORT_NAME_DIGITAL(__LINE__, ENET_RXD1) #endif -#if _EXISTS(ENET_TX_EN) +#if defined(ENET_TX_EN) && ENET_TX_EN > 0 REPORT_NAME_DIGITAL(__LINE__, ENET_TX_EN) #endif -#if _EXISTS(ENET_TXD0) +#if defined(ENET_TXD0) && ENET_TXD0 > 0 REPORT_NAME_DIGITAL(__LINE__, ENET_TXD0) #endif -#if _EXISTS(ENET_TXD1) +#if defined(ENET_TXD1) && ENET_TXD1 > 0 REPORT_NAME_DIGITAL(__LINE__, ENET_TXD1) #endif #if PIN_EXISTS(EXP_VOLTAGE_LEVEL) REPORT_NAME_DIGITAL(__LINE__, EXP_VOLTAGE_LEVEL_PIN) #endif -#if _EXISTS_ANALOG(EXT_AUX_A0) +#if defined(EXT_AUX_A0) && EXT_AUX_A0 > 0 && EXT_AUX_A0 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A0) #endif -#if _EXISTS(EXT_AUX_A0) && EXT_AUX_A0 >= NUM_ANALOG_INPUTS +#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= NUM_ANALOG_INPUTS && EXT_AUX_A0 > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A0) #endif -#if _EXISTS(EXT_AUX_A0_IO) +#if defined(EXT_AUX_A0_IO) && EXT_AUX_A0_IO > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A0_IO) #endif -#if _EXISTS_ANALOG(EXT_AUX_A1) +#if defined(EXT_AUX_A1) && EXT_AUX_A1 > 0 && EXT_AUX_A1 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A1) #endif -#if _EXISTS(EXT_AUX_A1) && EXT_AUX_A1 >= NUM_ANALOG_INPUTS +#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= NUM_ANALOG_INPUTS && EXT_AUX_A1 > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A1) #endif -#if _EXISTS(EXT_AUX_A1_IO) +#if defined(EXT_AUX_A1_IO) && EXT_AUX_A1_IO > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A1_IO) #endif -#if _EXISTS_ANALOG(EXT_AUX_A2) +#if defined(EXT_AUX_A2) && EXT_AUX_A2 > 0 && EXT_AUX_A2 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A2) #endif -#if _EXISTS(EXT_AUX_A2) && EXT_AUX_A2 >= NUM_ANALOG_INPUTS +#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= NUM_ANALOG_INPUTS && EXT_AUX_A2 > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A2) #endif -#if _EXISTS(EXT_AUX_A2_IO) +#if defined(EXT_AUX_A2_IO) && EXT_AUX_A2_IO > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A2_IO) #endif -#if _EXISTS_ANALOG(EXT_AUX_A3) +#if defined(EXT_AUX_A3) && EXT_AUX_A3 > 0 && EXT_AUX_A3 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A3) #endif -#if _EXISTS(EXT_AUX_A3) && EXT_AUX_A3 >= NUM_ANALOG_INPUTS +#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= NUM_ANALOG_INPUTS && EXT_AUX_A3 > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A3) #endif -#if _EXISTS(EXT_AUX_A3_IO) +#if defined(EXT_AUX_A3_IO) && EXT_AUX_A3_IO > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A3_IO) #endif -#if _EXISTS_ANALOG(EXT_AUX_A4) +#if defined(EXT_AUX_A4) && EXT_AUX_A4 > 0 && EXT_AUX_A4 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A4) #endif -#if _EXISTS(EXT_AUX_A4) && EXT_AUX_A4 >= NUM_ANALOG_INPUTS +#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= NUM_ANALOG_INPUTS && EXT_AUX_A4 > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A4) #endif -#if _EXISTS(EXT_AUX_A4_IO) +#if defined(EXT_AUX_A4_IO) && EXT_AUX_A4_IO > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A4_IO) #endif -#if _EXISTS(EXT_AUX_PWM_D24) +#if defined(EXT_AUX_PWM_D24) && EXT_AUX_PWM_D24 > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_PWM_D24) #endif -#if _EXISTS(EXT_AUX_RX1_D2) +#if defined(EXT_AUX_RX1_D2) && EXT_AUX_RX1_D2 > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_RX1_D2) #endif -#if _EXISTS(EXT_AUX_SCL_D0) +#if defined(EXT_AUX_SCL_D0) && EXT_AUX_SCL_D0 > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_SCL_D0) #endif -#if _EXISTS(EXT_AUX_SDA_D1) +#if defined(EXT_AUX_SDA_D1) && EXT_AUX_SDA_D1 > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_SDA_D1) #endif -#if _EXISTS(EXT_AUX_TX1_D3) +#if defined(EXT_AUX_TX1_D3) && EXT_AUX_TX1_D3 > 0 REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_TX1_D3) #endif -#if _EXISTS(EXTRUDER_0_AUTO_FAN) +#if defined(EXTRUDER_0_AUTO_FAN) && EXTRUDER_0_AUTO_FAN > 0 REPORT_NAME_DIGITAL(__LINE__, EXTRUDER_0_AUTO_FAN) #endif -#if _EXISTS(EXTRUDER_1_AUTO_FAN) +#if defined(EXTRUDER_1_AUTO_FAN) && EXTRUDER_1_AUTO_FAN > 0 REPORT_NAME_DIGITAL(__LINE__, EXTRUDER_1_AUTO_FAN) #endif #if PIN_EXISTS(FAN) @@ -461,7 +457,7 @@ #if PIN_EXISTS(FIL_RUNOUT) REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT_PIN) #endif -#if PIN_EXISTS_ANALOG(FILWIDTH) +#if PIN_EXISTS(FILWIDTH) && FILWIDTH_PIN >= 0 && FILWIDTH_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, FILWIDTH_PIN) #endif #if PIN_EXISTS(HEATER_0) @@ -506,25 +502,25 @@ #if PIN_EXISTS(LCD_BACKLIGHT) REPORT_NAME_DIGITAL(__LINE__, LCD_BACKLIGHT_PIN) #endif -#if _EXISTS(LCD_PINS_D4) +#if defined(LCD_PINS_D4) && LCD_PINS_D4 > 0 REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_D4) #endif -#if _EXISTS(LCD_PINS_D5) +#if defined(LCD_PINS_D5) && LCD_PINS_D5 > 0 REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_D5) #endif -#if _EXISTS(LCD_PINS_D6) +#if defined(LCD_PINS_D6) && LCD_PINS_D6 > 0 REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_D6) #endif -#if _EXISTS(LCD_PINS_D7) +#if defined(LCD_PINS_D7) && LCD_PINS_D7 > 0 REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_D7) #endif -#if _EXISTS(LCD_PINS_ENABLE) +#if defined(LCD_PINS_ENABLE) && LCD_PINS_ENABLE > 0 REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_ENABLE) #endif -#if _EXISTS(LCD_PINS_RS) +#if defined(LCD_PINS_RS) && LCD_PINS_RS > 0 REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_RS) #endif -#if _EXISTS(LCD_SDSS) +#if defined(LCD_SDSS) && LCD_SDSS > 0 REPORT_NAME_DIGITAL(__LINE__, LCD_SDSS) #endif #if PIN_EXISTS(LED_GREEN) @@ -545,13 +541,13 @@ #if PIN_EXISTS(MAX6675_SCK) REPORT_NAME_DIGITAL(__LINE__, MAX6675_SCK_PIN) #endif -#if PIN_EXISTS_ANALOG(MAIN_VOLTAGE_MEASURE) +#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) && MAIN_VOLTAGE_MEASURE_PIN >= 0 && MAIN_VOLTAGE_MEASURE_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, MAIN_VOLTAGE_MEASURE_PIN) #endif -#if _EXISTS(MAX6675_SS) +#if defined(MAX6675_SS) && MAX6675_SS > 0 REPORT_NAME_DIGITAL(__LINE__, MAX6675_SS) #endif -// #if _EXISTS(MISO) +// #if defined(MISO) && MISO > 0 // REPORT_NAME_DIGITAL(__LINE__, MISO) // #endif #if PIN_EXISTS(MISO) @@ -569,7 +565,7 @@ #if PIN_EXISTS(MOSFET_D) REPORT_NAME_DIGITAL(__LINE__, MOSFET_D_PIN) #endif -// #if _EXISTS(MOSI) +// #if defined(MOSI) && MOSI > 0 // REPORT_NAME_DIGITAL(__LINE__, MOSI) // #endif #if PIN_EXISTS(MOSI) @@ -617,7 +613,7 @@ #if PIN_EXISTS(PWM_2) REPORT_NAME_DIGITAL(__LINE__, PWM_2_PIN) #endif -#if _EXISTS(REF_CLK) +#if defined(REF_CLK) && REF_CLK > 0 REPORT_NAME_DIGITAL(__LINE__, REF_CLK) #endif #if PIN_EXISTS(RAMPS_D10) @@ -647,28 +643,28 @@ #if PIN_EXISTS(SAFETY_TRIGGERED) REPORT_NAME_DIGITAL(__LINE__, SAFETY_TRIGGERED_PIN) #endif -// #if _EXISTS(SCK) +// #if defined(SCK) && SCK > 0 // REPORT_NAME_DIGITAL(__LINE__, SCK) // #endif #if PIN_EXISTS(SCK) REPORT_NAME_DIGITAL(__LINE__, SCK_PIN) #endif -#if _EXISTS(SCL) +#if defined(SCL) && SCL > 0 REPORT_NAME_DIGITAL(__LINE__, SCL) #endif #if PIN_EXISTS(SD_DETECT) REPORT_NAME_DIGITAL(__LINE__, SD_DETECT_PIN) #endif -#if _EXISTS(SDA) +#if defined(SDA) && SDA > 0 REPORT_NAME_DIGITAL(__LINE__, SDA) #endif -#if _EXISTS(SDPOWER) +#if defined(SDPOWER) && SDPOWER > 0 REPORT_NAME_DIGITAL(__LINE__, SDPOWER) #endif -#if _EXISTS(SDSS) +#if defined(SDSS) && SDSS > 0 REPORT_NAME_DIGITAL(__LINE__, SDSS) #endif -#if _EXISTS(SERVO0) +#if defined(SERVO0) && SERVO0 > 0 REPORT_NAME_DIGITAL(__LINE__, SERVO0) #endif #if PIN_EXISTS(SERVO0) @@ -683,16 +679,16 @@ #if PIN_EXISTS(SERVO3) REPORT_NAME_DIGITAL(__LINE__, SERVO3_PIN) #endif -#if _EXISTS(SHIFT_CLK) +#if defined(SHIFT_CLK) && SHIFT_CLK > 0 REPORT_NAME_DIGITAL(__LINE__, SHIFT_CLK) #endif -#if _EXISTS(SHIFT_EN) +#if defined(SHIFT_EN) && SHIFT_EN > 0 REPORT_NAME_DIGITAL(__LINE__, SHIFT_EN) #endif -#if _EXISTS(SHIFT_LD) +#if defined(SHIFT_LD) && SHIFT_LD > 0 REPORT_NAME_DIGITAL(__LINE__, SHIFT_LD) #endif -#if _EXISTS(SHIFT_OUT) +#if defined(SHIFT_OUT) && SHIFT_OUT > 0 REPORT_NAME_DIGITAL(__LINE__, SHIFT_OUT) #endif #if PIN_EXISTS(SLED) @@ -716,25 +712,25 @@ #if PIN_EXISTS(SOL4) REPORT_NAME_DIGITAL(__LINE__, SOL4_PIN) #endif -#if _EXISTS(SPARE_IO) +#if defined(SPARE_IO) && SPARE_IO > 0 REPORT_NAME_DIGITAL(__LINE__, SPARE_IO) #endif -#if _EXISTS(SPI_CHAN_DAC) +#if defined(SPI_CHAN_DAC) && SPI_CHAN_DAC > 0 REPORT_NAME_DIGITAL(__LINE__, SPI_CHAN_DAC) #endif -#if _EXISTS(SPI_CHAN_EEPROM1) +#if defined(SPI_CHAN_EEPROM1) && SPI_CHAN_EEPROM1 > 0 REPORT_NAME_DIGITAL(__LINE__, SPI_CHAN_EEPROM1) #endif -#if _EXISTS(SPI_EEPROM) +#if defined(SPI_EEPROM) && SPI_EEPROM > 0 REPORT_NAME_DIGITAL(__LINE__, SPI_EEPROM) #endif -#if _EXISTS(SPI_EEPROM1_CS) +#if defined(SPI_EEPROM1_CS) && SPI_EEPROM1_CS > 0 REPORT_NAME_DIGITAL(__LINE__, SPI_EEPROM1_CS) #endif -#if _EXISTS(SPI_EEPROM2_CS) +#if defined(SPI_EEPROM2_CS) && SPI_EEPROM2_CS > 0 REPORT_NAME_DIGITAL(__LINE__, SPI_EEPROM2_CS) #endif -#if _EXISTS(SPI_FLASH_CS) +#if defined(SPI_FLASH_CS) && SPI_FLASH_CS > 0 REPORT_NAME_DIGITAL(__LINE__, SPI_FLASH_CS) #endif #if PIN_EXISTS(SPINDLE_DIR) @@ -764,7 +760,7 @@ #if PIN_EXISTS(STAT_LED_BLUE) REPORT_NAME_DIGITAL(__LINE__, STAT_LED_BLUE_PIN) #endif -#if _EXISTS(STAT_LED_RED_LED) +#if defined(STAT_LED_RED_LED) && STAT_LED_RED_LED > 0 REPORT_NAME_DIGITAL(__LINE__, STAT_LED_RED_LED) #endif #if PIN_EXISTS(STAT_LED_RED) @@ -776,40 +772,40 @@ #if PIN_EXISTS(SUICIDE) REPORT_NAME_DIGITAL(__LINE__, SUICIDE_PIN) #endif -#if _EXISTS(THERMO_CS1) +#if defined(THERMO_CS1) && THERMO_CS1 > 0 REPORT_NAME_DIGITAL(__LINE__, THERMO_CS1) #endif -#if _EXISTS(THERMO_CS2) +#if defined(THERMO_CS2) && THERMO_CS2 > 0 REPORT_NAME_DIGITAL(__LINE__, THERMO_CS2) #endif -#if _EXISTS_ANALOG(TC1) +#if defined(TC1) && TC1 > 0 && TC1 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TC1) #endif -#if _EXISTS_ANALOG(TC2) +#if defined(TC2) && TC2 > 0 && TC2 < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TC2) #endif -#if PIN_EXISTS_ANALOG(TEMP_0) +#if PIN_EXISTS(TEMP_0) && TEMP_0_PIN >= 0 && TEMP_0_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_0_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_1) +#if PIN_EXISTS(TEMP_1) && TEMP_1_PIN >= 0 && TEMP_1_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_1_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_2) +#if PIN_EXISTS(TEMP_2) && TEMP_2_PIN >= 0 && TEMP_2_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_2_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_3) +#if PIN_EXISTS(TEMP_3) && TEMP_3_PIN >= 0 && TEMP_3_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_3_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_4) +#if PIN_EXISTS(TEMP_4) && TEMP_4_PIN >= 0 && TEMP_4_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_4_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_BED) +#if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN >= 0 && TEMP_BED_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_BED_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_CHAMBER) +#if PIN_EXISTS(TEMP_CHAMBER) && TEMP_CHAMBER_PIN >= 0 && TEMP_CHAMBER_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_CHAMBER_PIN) #endif -#if PIN_EXISTS_ANALOG(TEMP_X) +#if PIN_EXISTS(TEMP_X) && TEMP_X_PIN >= 0 && TEMP_X_PIN < NUM_ANALOG_INPUTS REPORT_NAME_ANALOG(__LINE__, TEMP_X_PIN) #endif #if PIN_EXISTS(THERMO_DO) @@ -860,13 +856,13 @@ #if PIN_EXISTS(TX_ENABLE) REPORT_NAME_DIGITAL(__LINE__, TX_ENABLE_PIN) #endif -#if _EXISTS(UI1) +#if defined(UI1) && UI1 > 0 REPORT_NAME_DIGITAL(__LINE__, UI1) #endif -#if _EXISTS(UI2) +#if defined(UI2) && UI2 > 0 REPORT_NAME_DIGITAL(__LINE__, UI2) #endif -#if _EXISTS(UNUSED_PWM) +#if defined(UNUSED_PWM) && UNUSED_PWM > 0 REPORT_NAME_DIGITAL(__LINE__, UNUSED_PWM) #endif #if PIN_EXISTS(X_ATT) From 343c17d5b3d4cff94f8c3c33f446df7841eeadbb Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 21 Feb 2018 16:08:52 -0600 Subject: [PATCH 26/32] Reduce Creality3D bootscreens flash usage (#9752) --- .../examples/Creality/CR-10/_Bootscreen.h | 58 +------- .../examples/Creality/Ender/_Bootscreen.h | 125 +++++++++--------- Marlin/src/lcd/ultralcd_impl_DOGM.h | 14 +- 3 files changed, 78 insertions(+), 119 deletions(-) diff --git a/Marlin/src/config/examples/Creality/CR-10/_Bootscreen.h b/Marlin/src/config/examples/Creality/CR-10/_Bootscreen.h index 9c8586790..d74e7ae9f 100644 --- a/Marlin/src/config/examples/Creality/CR-10/_Bootscreen.h +++ b/Marlin/src/config/examples/Creality/CR-10/_Bootscreen.h @@ -34,28 +34,6 @@ #define CUSTOM_BOOTSCREEN_BMPWIDTH 128 const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, @@ -66,36 +44,12 @@ const unsigned char custom_start_bmp[] PROGMEM = { B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, - B01100000,B00000000,B11000000,B00111111,B11111000,B11111111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, - B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B10000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, - B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11100000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, - B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11100111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, + B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, + B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, + B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 -}; + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 +}; \ No newline at end of file diff --git a/Marlin/src/config/examples/Creality/Ender/_Bootscreen.h b/Marlin/src/config/examples/Creality/Ender/_Bootscreen.h index ed877a037..11be930e9 100644 --- a/Marlin/src/config/examples/Creality/Ender/_Bootscreen.h +++ b/Marlin/src/config/examples/Creality/Ender/_Bootscreen.h @@ -31,71 +31,66 @@ */ #define CUSTOM_BOOTSCREEN_TIMEOUT 1000 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 81 +#define CUSTOM_BOOTSCREEN_INVERTED const unsigned char custom_start_bmp[] PROGMEM = { - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111 + B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111, + B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111, + B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111, + B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111, + B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111, + B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111, + B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111, + B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111, + B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, + B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, + B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, + B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, + B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111, + B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111, + B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111, + B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111, + B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111, + B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111, + B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111, + B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111, + B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111, + B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111, + B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111, + B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111, + B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111, + B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111 }; diff --git a/Marlin/src/lcd/ultralcd_impl_DOGM.h b/Marlin/src/lcd/ultralcd_impl_DOGM.h index 38dd93528..a03bd4873 100644 --- a/Marlin/src/lcd/ultralcd_impl_DOGM.h +++ b/Marlin/src/lcd/ultralcd_impl_DOGM.h @@ -295,13 +295,23 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { #if ENABLED(SHOW_CUSTOM_BOOTSCREEN) void lcd_custom_bootscreen() { + constexpr u8g_uint_t left = (LCD_PIXEL_WIDTH - (CUSTOM_BOOTSCREEN_BMPWIDTH)) / 2, + top = (LCD_PIXEL_HEIGHT - (CUSTOM_BOOTSCREEN_BMPHEIGHT)) / 2, + right = left + CUSTOM_BOOTSCREEN_BMPWIDTH, + bottom = top + CUSTOM_BOOTSCREEN_BMPHEIGHT; u8g.firstPage(); do { u8g.drawBitmapP( - (LCD_PIXEL_WIDTH - (CUSTOM_BOOTSCREEN_BMPWIDTH)) / 2, - (LCD_PIXEL_HEIGHT - (CUSTOM_BOOTSCREEN_BMPHEIGHT)) / 2, + left, top, CEILING(CUSTOM_BOOTSCREEN_BMPWIDTH, 8), CUSTOM_BOOTSCREEN_BMPHEIGHT, custom_start_bmp ); + #if ENABLED(CUSTOM_BOOTSCREEN_INVERTED) + u8g.setColorIndex(1); + if (top) u8g.drawBox(0, 0, LCD_PIXEL_WIDTH, top); + if (left) u8g.drawBox(0, top, left, CUSTOM_BOOTSCREEN_BMPHEIGHT); + if (right < LCD_PIXEL_WIDTH) u8g.drawBox(right, top, LCD_PIXEL_WIDTH - right, CUSTOM_BOOTSCREEN_BMPHEIGHT); + if (bottom < LCD_PIXEL_HEIGHT) u8g.drawBox(0, bottom, LCD_PIXEL_WIDTH, LCD_PIXEL_HEIGHT - bottom); + #endif } while (u8g.nextPage()); safe_delay(CUSTOM_BOOTSCREEN_TIMEOUT); } From 4431f4deb80f0cd11e4bae56d3c0acdf59288d9f Mon Sep 17 00:00:00 2001 From: ldkraemer Date: Wed, 21 Feb 2018 18:02:25 -0600 Subject: [PATCH 27/32] Add CR-10S _Bootscreen.h --- .../examples/Creality/CR-10S/_Bootscreen.h | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Marlin/src/config/examples/Creality/CR-10S/_Bootscreen.h diff --git a/Marlin/src/config/examples/Creality/CR-10S/_Bootscreen.h b/Marlin/src/config/examples/Creality/CR-10S/_Bootscreen.h new file mode 100644 index 000000000..38fb68f7d --- /dev/null +++ b/Marlin/src/config/examples/Creality/CR-10S/_Bootscreen.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, + B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, + B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, + B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, + B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, + B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, + B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, + B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, + B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, + B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, + B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 +}; From 6c3162f9c6a28e21b30639e1ea7c06718696e067 Mon Sep 17 00:00:00 2001 From: ldkraemer Date: Wed, 21 Feb 2018 18:08:54 -0600 Subject: [PATCH 28/32] Add CR-10 Mini configuration --- .../Creality/CR-10mini/Configuration.h | 1856 +++++++++++++++++ .../Creality/CR-10mini/Configuration_adv.h | 1617 ++++++++++++++ .../examples/Creality/CR-10mini/_Bootscreen.h | 55 + .../Creality/CR-10mini/_Statusscreen.h | 80 + 4 files changed, 3608 insertions(+) create mode 100644 Marlin/src/config/examples/Creality/CR-10mini/Configuration.h create mode 100644 Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h create mode 100644 Marlin/src/config/examples/Creality/CR-10mini/_Bootscreen.h create mode 100644 Marlin/src/config/examples/Creality/CR-10mini/_Statusscreen.h diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h new file mode 100644 index 000000000..2cb789e80 --- /dev/null +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h @@ -0,0 +1,1856 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ + +/** + * Creality CR-10 Mini + * X=300mm Y=220mm Z=300mm + * E3DV6 Hotend + * Titan Extruder + * CR10_STOCKDISPLAY (RAMPS-compatible with single 10-pin plug) + */ + +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 020000 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// config/examples/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// config/examples/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +// +// *** VENDORS PLEASE READ ***************************************************** +// +// Marlin now allow you to have a vendor boot image to be displayed on machine +// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your +// custom boot image and then the default Marlin boot image is shown. +// +// We suggest for you to take advantage of this new feature and keep the Marlin +// boot image unmodified. For an example have a look at the bq Hephestos 2 +// example configuration folder. +// +#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if available. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT_2 -1 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI_CREALITY +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "CR-10 Mini" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds a new code, M165, to set the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware M163, M164, and virtual extruder. + * - This implementation supports only a single extruder. + * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 120 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Stock CR-10 tuned for 70C + #define DEFAULT_Kp 22.57 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 73.96 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== +// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis +// +// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. +// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, +// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. +// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. +// If your configuration is significantly different than this and you don't understand the issues involved, you probably +// shouldn't use bed PID until someone else verifies your hardware works. +// If this is enabled, find your own PID constants below. +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. +// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) +// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, +// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //Stock CR-10 Bed Tuned for 70C + #define DEFAULT_bedKp 426.68 + #define DEFAULT_bedKi 78.92 + #define DEFAULT_bedKd 576.71 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. +// It also enables the M302 command to set the minimum extrusion temperature +// or to allow moving the extruder regardless of the hotend temperature. +// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. +// Note that for Bowden Extruders a too-small value here may prevent loading. +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 1000 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.60, 80, 400, 229.4 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Speed for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// Enable this option for Toshiba stepper drivers +//#define CONFIG_STEPPERS_TOSHIBA + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define Z_HOMING_HEIGHT 5 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 300 +#define Y_BED_SIZE 220 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 300 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // The Z probe minimum outer margin (to validate G29 parameters). + #define MIN_PROBE_EDGE 10 + + // Set the boundaries for probing (where the probe can reach). + #define LEFT_PROBE_BED_POSITION 15 + #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15) + #define FRONT_PROBE_BED_POSITION 15 + #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_3POINT) + + // 3 arbitrary points to probe. + // A simple cross-product is used to estimate the plane of the bed. + #define ABL_PROBE_PT_1_X 15 + #define ABL_PROBE_PT_1_Y 180 + #define ABL_PROBE_PT_2_X 15 + #define ABL_PROBE_PT_2_Y 20 + #define ABL_PROBE_PT_3_X 170 + #define ABL_PROBE_PT_3_Y 20 + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Mesh inset margin on print area + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 + #define UBL_PROBE_PT_2_X 39 + #define UBL_PROBE_PT_2_Y 20 + #define UBL_PROBE_PT_3_X 180 + #define UBL_PROBE_PT_3_Y 20 + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Mesh inset margin on print area + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Use the LCD controller for bed leveling + * Requires MESH_BED_LEVELING or PROBE_MANUALLY + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl, + * hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, + * tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 WESTERN + +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ +//#define ULTRA_LCD // Character based +//#define DOGLCD // Full graphics display + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +// +// CONTROLLER TYPE: Standard +// +// Marlin supports a wide variety of controllers. +// Enable one of the following options to specify your controller. +// + +// +// Original RADDS LCD Display+Encoder+SDCardReader +// http://doku.radds.org/dokumentation/lcd-display/ +// +//#define RADDS_DISPLAY + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// ANET and Tronxy Controller supported displays. +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// CONTROLLER TYPE: Shift register panels +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// AZSMZ 12864 LCD with SD +// https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html +// +//#define AZSMZ_12864 + +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Servo deactivation +// +// With this option servos are powered only during movement, then turned off to prevent jitter. +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h new file mode 100644 index 000000000..d443d2dc4 --- /dev/null +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -0,0 +1,1617 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 020000 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. +//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +// This defines the minimal speed for the main fan, run in PWM mode +// to enable uncomment and set minimal PWM speed for reliable running (1-255) +// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +//#define FAN_MIN_PWM 50 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +// Enable this for dual x-carriage printers. +// A dual x-carriage design has the advantage that the inactive extruder can be parked which +// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage +// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + // Configuration for second X-carriage + // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; + // the second x-carriage always homes to the maximum endstop. + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Leave out seldom-used LCD menu items to recover some Program Memory +//#define SLIM_LCD_MENUS + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // Show a progress bar on HD44780 LCDs for SD printing + //#define LCD_PROGRESS_BAR + + #if ENABLED(LCD_PROGRESS_BAR) + // Amount of time (ms) to show the bar + #define PROGRESS_BAR_BAR_TIME 2000 + // Amount of time (ms) to show the status message + #define PROGRESS_BAR_MSG_TIME 3000 + // Amount of time (ms) to retain the status message (0=forever) + #define PROGRESS_MSG_EXPIRE 0 + // Enable this to show messages for MSG_TIME then hide them + //#define PROGRESS_MSG_ONCE + // Add a menu item to test the progress bar: + //#define LCD_PROGRESS_BAR_TEST + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Implementation of linear pressure control + * + * Assumption: advance = k * (delta velocity) + * K=0 means advance disabled. + * See Marlin documentation for calibration instructions. + */ +//#define LIN_ADVANCE + +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 75 + + /** + * Some Slicers produce Gcode with randomly jumping extrusion widths occasionally. + * For example within a 0.4mm perimeter it may produce a single segment of 0.05mm width. + * While this is harmless for normal printing (the fluid nature of the filament will + * close this very, very tiny gap), it throws off the LIN_ADVANCE pressure adaption. + * + * For this case LIN_ADVANCE_E_D_RATIO can be used to set the extrusion:distance ratio + * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures + * if the slicer is using variable widths or layer heights within one print! + * + * This option sets the default E:D ratio at startup. Use `M900` to override this value. + * + * Example: `M900 W0.4 H0.2 D1.75`, where: + * - W is the extrusion width in mm + * - H is the layer height in mm + * - D is the filament diameter in mm + * + * Example: `M900 R0.0458` to set the ratio directly. + * + * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves. + * + * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode. + * Cura (as of this writing) may produce Gcode incompatible with the automatic mode. + */ + #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI) + // Example: 0.4 * 0.2 / ((1.75 / 2) ^ 2 * PI) = 0.033260135 +#endif + +// @section leveling + +#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS) + #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS +#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS) + #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) +#endif + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +// The minimum pulse width (in µs) for stepping a stepper. +// Set this if you find stepping unreliable, or if using a very fast CPU. +#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_LOAD_FEEDRATE 8 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * Enable this section if you have TMC26X motor drivers. + * You will need to import the TMC26XStepper library into the Arduino IDE for this + * (https://github.com/trinamic/TMC26XStepper.git) + */ +//#define HAVE_TMCDRIVER + +#if ENABLED(HAVE_TMCDRIVER) + + //#define X_IS_TMC + //#define X2_IS_TMC + //#define Y_IS_TMC + //#define Y2_IS_TMC + //#define Z_IS_TMC + //#define Z2_IS_TMC + //#define E0_IS_TMC + //#define E1_IS_TMC + //#define E2_IS_TMC + //#define E3_IS_TMC + //#define E4_IS_TMC + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section TMC2130, TMC2208 + +/** + * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + */ +//#define HAVE_TMC2130 + +/** + * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. + * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +//#define HAVE_TMC2208 + +#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) + + // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY + //#define X_IS_TMC2130 + //#define X2_IS_TMC2130 + //#define Y_IS_TMC2130 + //#define Y2_IS_TMC2130 + //#define Z_IS_TMC2130 + //#define Z2_IS_TMC2130 + //#define E0_IS_TMC2130 + //#define E1_IS_TMC2130 + //#define E2_IS_TMC2130 + //#define E3_IS_TMC2130 + //#define E4_IS_TMC2130 + + //#define X_IS_TMC2208 + //#define X2_IS_TMC2208 + //#define Y_IS_TMC2208 + //#define Y2_IS_TMC2208 + //#define Z_IS_TMC2208 + //#define Z2_IS_TMC2208 + //#define E0_IS_TMC2208 + //#define E1_IS_TMC2208 + //#define E2_IS_TMC2208 + //#define E3_IS_TMC2208 + //#define E4_IS_TMC2208 + + /** + * Stepper driver settings + */ + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * Enable this section if you have L6470 motor drivers. + * You need to import the L6470 library into the Arduino IDE for this. + * (https://github.com/ameyer/Arduino-L6470) + */ + +//#define HAVE_L6470DRIVER +#if ENABLED(HAVE_L6470DRIVER) + + //#define X_IS_L6470 + //#define X2_IS_L6470 + //#define Y_IS_L6470 + //#define Y2_IS_L6470 + //#define Z_IS_L6470 + //#define Z2_IS_L6470 + //#define E0_IS_L6470 + //#define E1_IS_L6470 + //#define E2_IS_L6470 + //#define E3_IS_L6470 + //#define E4_IS_L6470 + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status + * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + * + * Fully assembled MAX7219 boards can be found on the internet for under $2(US). + * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define MAX7219_DIN_PIN 57 // 78 on Re-ARM + #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/src/config/examples/Creality/CR-10mini/_Bootscreen.h b/Marlin/src/config/examples/Creality/CR-10mini/_Bootscreen.h new file mode 100644 index 000000000..38fb68f7d --- /dev/null +++ b/Marlin/src/config/examples/Creality/CR-10mini/_Bootscreen.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, + B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, + B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, + B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, + B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, + B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, + B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, + B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, + B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, + B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, + B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 +}; diff --git a/Marlin/src/config/examples/Creality/CR-10mini/_Statusscreen.h b/Marlin/src/config/examples/Creality/CR-10mini/_Statusscreen.h new file mode 100644 index 000000000..f4fd17696 --- /dev/null +++ b/Marlin/src/config/examples/Creality/CR-10mini/_Statusscreen.h @@ -0,0 +1,80 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Status Screen bitmap + * + * Place this file in the root with your configuration files + * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define STATUS_SCREENWIDTH 128 +#define STATUS_SCREEN_HOTEND_TEXT_X(E) 38 +#define STATUS_SCREEN_BED_TEXT_X 73 + +//============================================ + +const unsigned char status_screen0_bmp[] PROGMEM = { + B00000111,B11001111,B10000000,B00110001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00001111,B11001111,B11000000,B01110011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001100,B00001100,B01000000,B01110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00001100,B00001111,B11001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00001100,B00001101,B10001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00001111,B11001100,B11000000,B00110011,B11110000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B00000111,B11001100,B11000000,B00110001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B00000001,B10000011,B00110000,B00000011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B00000001,B10000011,B00110010,B00000011,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000, + B00000001,B11000111,B00000010,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000001,B11000111,B00110011,B11110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000001,B11101111,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000001,B10111011,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000, + B00000001,B10010011,B00110011,B00110011,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000001,B10010011,B00110011,B00110011,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000001,B10000011,B00110011,B00110011,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 +}; +const unsigned char status_screen1_bmp[] PROGMEM = { + B00000111,B11001111,B10000000,B00110001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00001111,B11001111,B11000000,B01110011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001100,B00001100,B01000000,B01110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00001100,B00001111,B11001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00001100,B00001101,B10001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00001111,B11001100,B11000000,B00110011,B11110000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B00000111,B11001100,B11000000,B00110001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B00000001,B10000011,B00110000,B00000011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B00000001,B10000011,B00110010,B00000011,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000, + B00000001,B11000111,B00000010,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000001,B11000111,B00110011,B11110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000001,B11101111,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000001,B10111011,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000, + B00000001,B10010011,B00110011,B00110011,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000001,B10010011,B00110011,B00110011,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000001,B10000011,B00110011,B00110011,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 +}; From 72f63a4980908257c9fdc9dc9749c976d4d9d19c Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 21 Feb 2018 19:25:50 -0600 Subject: [PATCH 29/32] Fix DOGM progress bar with LCD_SET_PROGRESS_MANUALLY --- Marlin/src/lcd/ultralcd.cpp | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index a5b82fcad..5bf308d3c 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -654,6 +654,12 @@ void lcd_status_screen() { ENCODER_RATE_MULTIPLY(false); #endif + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) && (ENABLED(LCD_PROGRESS_BAR) || ENABLED(DOGLCD)) + // Progress bar % comes from SD when actively printing + if (IS_SD_PRINTING) + progress_bar_percent = card.percentDone(); + #endif + #if ENABLED(LCD_PROGRESS_BAR) // @@ -662,12 +668,6 @@ void lcd_status_screen() { // share the same line on the display. // - // Set current percentage from SD when actively printing - #if ENABLED(LCD_SET_PROGRESS_MANUALLY) - if (IS_SD_PRINTING) - progress_bar_percent = card.percentDone(); - #endif - millis_t ms = millis(); // If the message will blink rather than expire... From 59c98d6fd57a390cdb44983ff94e4fb622dfa6fd Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 21 Feb 2018 22:27:09 -0600 Subject: [PATCH 30/32] Hephestos2 heated bed kit for all (#9757) --- Marlin/Configuration_adv.h | 11 ++++++++ Marlin/src/config/default/Configuration_adv.h | 11 ++++++++ .../AlephObjects/TAZ4/Configuration_adv.h | 11 ++++++++ .../examples/Anet/A6/Configuration_adv.h | 11 ++++++++ .../examples/Anet/A8/Configuration_adv.h | 11 ++++++++ .../examples/Azteeg/X5GT/Configuration_adv.h | 11 ++++++++ .../examples/BIBO/TouchX/Configuration_adv.h | 11 ++++++++ .../examples/BQ/Hephestos/Configuration_adv.h | 11 ++++++++ .../examples/BQ/Hephestos_2/Configuration.h | 27 +++++-------------- .../BQ/Hephestos_2/Configuration_adv.h | 11 ++++++++ .../examples/BQ/WITBOX/Configuration_adv.h | 11 ++++++++ .../examples/Cartesio/Configuration_adv.h | 11 ++++++++ .../Creality/CR-10/Configuration_adv.h | 11 ++++++++ .../Creality/CR-10S/Configuration_adv.h | 11 ++++++++ .../Creality/Ender/Configuration_adv.h | 11 ++++++++ .../config/examples/Felix/Configuration_adv.h | 11 ++++++++ .../FolgerTech/i3-2020/Configuration_adv.h | 11 ++++++++ .../Infitary/i3-M508/Configuration_adv.h | 11 ++++++++ .../examples/JGAurora/A5/Configuration_adv.h | 11 ++++++++ .../examples/MakerParts/Configuration_adv.h | 11 ++++++++ .../examples/Malyan/M150/Configuration_adv.h | 11 ++++++++ .../examples/Malyan/M200/Configuration_adv.h | 11 ++++++++ .../Micromake/C1/enhanced/Configuration_adv.h | 11 ++++++++ .../examples/Mks/Sbase/Configuration_adv.h | 11 ++++++++ .../examples/RigidBot/Configuration_adv.h | 11 ++++++++ .../config/examples/SCARA/Configuration_adv.h | 11 ++++++++ .../examples/Sanguinololu/Configuration_adv.h | 11 ++++++++ .../examples/TheBorg/Configuration_adv.h | 11 ++++++++ .../examples/TinyBoy2/Configuration_adv.h | 11 ++++++++ .../UltiMachine/Archim2/Configuration_adv.h | 11 ++++++++ .../Velleman/K8200/Configuration_adv.h | 11 ++++++++ .../Velleman/K8400/Configuration_adv.h | 11 ++++++++ .../Wanhao/Duplicator 6/Configuration_adv.h | 11 ++++++++ .../FLSUN/auto_calibrate/Configuration_adv.h | 11 ++++++++ .../delta/FLSUN/kossel/Configuration_adv.h | 11 ++++++++ .../FLSUN/kossel_mini/Configuration_adv.h | 11 ++++++++ .../delta/generic/Configuration_adv.h | 11 ++++++++ .../delta/kossel_mini/Configuration_adv.h | 11 ++++++++ .../delta/kossel_pro/Configuration_adv.h | 11 ++++++++ .../delta/kossel_xl/Configuration_adv.h | 11 ++++++++ .../gCreate/gMax1.5+/Configuration_adv.h | 11 ++++++++ .../examples/makibox/Configuration_adv.h | 11 ++++++++ .../tvrrug/Round2/Configuration_adv.h | 11 ++++++++ .../config/examples/wt150/Configuration_adv.h | 11 ++++++++ 44 files changed, 479 insertions(+), 21 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 243ad3297..5b873abdf 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index 243ad3297..5b873abdf 100644 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 00c700343..125bd9141 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index c3520aee1..20c4cc06a 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 912b64d6a..d23d26073 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h index d3bd3b2ed..dcd33b768 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h index bb8eb5dec..50ef23cc3 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index 06994aae2..8f5bc3f12 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index dfee5c6f4..201a04ebe 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -25,7 +25,7 @@ #define CONFIGURATION_H_VERSION 020000 //=========================================================================== -//================================= README ================================== +//============================= Getting Started ============================= //=========================================================================== /** @@ -34,15 +34,9 @@ * This configuration supports the standard Hephestos 2 with or without the * heated bed kit featured at https://store.bq.com/en/heated-bed-kit-hephestos2 * - * Enable the following option to activate all functionality related to the heated bed. - */ -//#define HEPHESTOS2_HEATED_BED_KIT - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** + * Enable HEPHESTOS2_HEATED_BED_KIT in Configuration_adv.h for all functionality + * related to the heated bed. + * * Here are some standard links for getting your machine calibrated: * * http://reprap.org/wiki/Calibration @@ -313,13 +307,7 @@ #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 - -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#else - #define TEMP_SENSOR_BED 0 -#endif +#define TEMP_SENSOR_BED 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -412,10 +400,7 @@ // all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) // setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, // so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) - -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current -#endif +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #if ENABLED(PIDTEMPBED) diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index 5eb03d180..3be8f8dcd 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index 06994aae2..8f5bc3f12 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index 9be79050b..60220f1db 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index b3e8b8c55..282ce0cc9 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index fcc9afd7e..25441b009 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h index f16433f92..6727bf256 100644 --- a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index a3dae02c6..51a76484a 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 8e490f853..f6f5270fe 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index bdb8798bd..ffe39b02a 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index 5f7bd9dc9..81a98c8eb 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index 37aa8bf65..315347e1a 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index 04a8f7b0e..6f9f527a2 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index d5fa7ef2d..eeb56edfe 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index b406b99d8..4b562b787 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index 750336556..198f4fcd6 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index f7aabe342..2cd9e5448 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index f6dea0622..be551646e 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 3000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index 82fad3d16..f0bded8d7 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index 51f416d03..5114bb82f 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index cf1be79b7..cd72fd0eb 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index 756dada7b..5d0b1697d 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index bcd42279b..99d956b3c 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -49,6 +49,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index af6773c93..5ea9cd203 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 1000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 28ae6c3a9..892d2f985 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 3aac73b8f..3370fb4f0 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 7b10f7e1e..7379b0eb5 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index daadd5efd..f15d97279 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index daadd5efd..f15d97279 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index daadd5efd..f15d97279 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h index a9f5d4fa8..1d6de6966 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h @@ -45,6 +45,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 232b8d6e5..8b5b3a99e 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 01afd6b77..122bc6b0e 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index a5b15b437..bd489d539 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index 5b1ae96d9..dd3e88e40 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index 9c7ea6d35..704db84b5 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -40,6 +40,17 @@ //=============================Thermal Settings ============================ //=========================================================================== +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + #if DISABLED(PIDTEMPBED) #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) From 532bb3aaa119d2d6ac6f5c31d33d5cc1aecd357b Mon Sep 17 00:00:00 2001 From: Marcio Teixeira Date: Wed, 14 Feb 2018 14:43:54 -0700 Subject: [PATCH 31/32] Lightweight status screen for ST7920 - This status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller. --- .travis.yml | 2 +- Marlin/Configuration_adv.h | 16 + Marlin/src/config/default/Configuration_adv.h | 16 + Marlin/src/lcd/dogm/status_screen_DOGM.h | 442 +++++++++ .../src/lcd/dogm/status_screen_lite_ST7920.h | 853 ++++++++++++++++++ .../dogm/status_screen_lite_ST7920_class.h | 108 +++ .../lcd/dogm/status_screen_lite_ST7920_spi.h | 39 + .../dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp | 14 +- Marlin/src/lcd/ultralcd.cpp | 42 +- Marlin/src/lcd/ultralcd_impl_DOGM.h | 423 +-------- 10 files changed, 1523 insertions(+), 432 deletions(-) create mode 100644 Marlin/src/lcd/dogm/status_screen_DOGM.h create mode 100644 Marlin/src/lcd/dogm/status_screen_lite_ST7920.h create mode 100644 Marlin/src/lcd/dogm/status_screen_lite_ST7920_class.h create mode 100644 Marlin/src/lcd/dogm/status_screen_lite_ST7920_spi.h diff --git a/.travis.yml b/.travis.yml index 7c7e71252..2048b649f 100644 --- a/.travis.yml +++ b/.travis.yml @@ -236,7 +236,7 @@ script: # - restore_configs - opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT - - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES + - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} # # REPRAPWORLD_KEYPAD diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 5b873abdf..a52880266 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index 5b873abdf..a52880266 100644 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.h b/Marlin/src/lcd/dogm/status_screen_DOGM.h new file mode 100644 index 000000000..478cbf846 --- /dev/null +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.h @@ -0,0 +1,442 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * status_screen_DOGM.h + * + * Standard Status Screen for Graphical Display + */ + +#ifndef _STATUS_SCREEN_DOGM_H_ +#define _STATUS_SCREEN_DOGM_H_ + +FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t x, const uint8_t y) { + const char * const str = itostr3(temp); + u8g.setPrintPos(x - (str[0] != ' ' ? 0 : str[1] != ' ' ? 1 : 2) * DOG_CHAR_WIDTH / 2, y); + lcd_print(str); + lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); +} + +#ifndef HEAT_INDICATOR_X + #define HEAT_INDICATOR_X 8 +#endif + +FORCE_INLINE void _draw_heater_status(const uint8_t x, const int8_t heater, const bool blink) { + #if !HEATER_IDLE_HANDLER + UNUSED(blink); + #endif + + #if HAS_TEMP_BED + const bool isBed = heater < 0; + #else + constexpr bool isBed = false; + #endif + + if (PAGE_UNDER(7)) { + #if HEATER_IDLE_HANDLER + const bool is_idle = (!isBed ? thermalManager.is_heater_idle(heater) : + #if HAS_TEMP_BED + thermalManager.is_bed_idle() + #else + false + #endif + ); + + if (blink || !is_idle) + #endif + _draw_centered_temp((isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater)) + 0.5, x, 7); } + + if (PAGE_CONTAINS(21, 28)) + _draw_centered_temp((isBed ? thermalManager.degBed() : thermalManager.degHotend(heater)) + 0.5, x, 28); + + if (PAGE_CONTAINS(17, 20)) { + const uint8_t h = isBed ? 7 : HEAT_INDICATOR_X, + y = isBed ? 18 : 17; + if (isBed ? thermalManager.isHeatingBed() : thermalManager.isHeatingHotend(heater)) { + u8g.setColorIndex(0); // white on black + u8g.drawBox(x + h, y, 2, 2); + u8g.setColorIndex(1); // black on white + } + else { + u8g.drawBox(x + h, y, 2, 2); + } + } +} + +FORCE_INLINE void _draw_axis_label(const AxisEnum axis, const char* const pstr, const bool blink) { + if (blink) + lcd_printPGM(pstr); + else { + if (!axis_homed[axis]) + u8g.print('?'); + else { + #if DISABLED(HOME_AFTER_DEACTIVATE) && DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) + if (!axis_known_position[axis]) + u8g.print(' '); + else + #endif + lcd_printPGM(pstr); + } + } +} + +inline void lcd_implementation_status_message(const bool blink) { + #if ENABLED(STATUS_MESSAGE_SCROLLING) + static bool last_blink = false; + const uint8_t slen = lcd_strlen(lcd_status_message); + const char *stat = lcd_status_message + status_scroll_pos; + if (slen <= LCD_WIDTH) + lcd_print_utf(stat); // The string isn't scrolling + else { + if (status_scroll_pos <= slen - LCD_WIDTH) + lcd_print_utf(stat); // The string fills the screen + else { + uint8_t chars = LCD_WIDTH; + if (status_scroll_pos < slen) { // First string still visible + lcd_print_utf(stat); // The string leaves space + chars -= slen - status_scroll_pos; // Amount of space left + } + u8g.print('.'); // Always at 1+ spaces left, draw a dot + if (--chars) { + if (status_scroll_pos < slen + 1) // Draw a second dot if there's space + --chars, u8g.print('.'); + if (chars) lcd_print_utf(lcd_status_message, chars); // Print a second copy of the message + } + } + if (last_blink != blink) { + last_blink = blink; + // Skip any non-printing bytes + if (status_scroll_pos < slen) while (!PRINTABLE(lcd_status_message[status_scroll_pos])) status_scroll_pos++; + if (++status_scroll_pos >= slen + 2) status_scroll_pos = 0; + } + } + #else + UNUSED(blink); + lcd_print_utf(lcd_status_message); + #endif +} + +static void lcd_implementation_status_screen() { + + const bool blink = lcd_blink(); + + #if FAN_ANIM_FRAMES > 2 + static bool old_blink; + static uint8_t fan_frame; + if (old_blink != blink) { + old_blink = blink; + if (!fanSpeeds[0] || ++fan_frame >= FAN_ANIM_FRAMES) fan_frame = 0; + } + #endif + + // Status Menu Font + lcd_setFont(FONT_STATUSMENU); + + // + // Fan Animation + // + // Draws the whole heading image as a B/W bitmap rather than + // drawing the elements separately. + // This was done as an optimization, as it was slower to draw + // multiple parts compared to a single bitmap. + // + // The bitmap: + // - May be offset in X + // - Includes all nozzle(s), bed(s), and the fan. + // + // TODO: + // + // - Only draw the whole header on the first + // entry to the status screen. Nozzle, bed, and + // fan outline bits don't change. + // + if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) { + + u8g.drawBitmapP( + STATUS_SCREEN_X, STATUS_SCREEN_Y, + (STATUS_SCREENWIDTH + 7) / 8, STATUS_SCREENHEIGHT, + #if HAS_FAN0 + #if FAN_ANIM_FRAMES > 2 + fan_frame == 1 ? status_screen1_bmp : + fan_frame == 2 ? status_screen2_bmp : + #if FAN_ANIM_FRAMES > 3 + fan_frame == 3 ? status_screen3_bmp : + #endif + #else + blink && fanSpeeds[0] ? status_screen1_bmp : + #endif + #endif + status_screen0_bmp + ); + + } + + // + // Temperature Graphics and Info + // + + if (PAGE_UNDER(28)) { + // Extruders + HOTEND_LOOP() _draw_heater_status(STATUS_SCREEN_HOTEND_TEXT_X(e), e, blink); + + // Heated bed + #if HOTENDS < 4 && HAS_TEMP_BED + _draw_heater_status(STATUS_SCREEN_BED_TEXT_X, -1, blink); + #endif + + #if HAS_FAN0 + if (PAGE_CONTAINS(20, 27)) { + // Fan + const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256; + if (per) { + u8g.setPrintPos(STATUS_SCREEN_FAN_TEXT_X, STATUS_SCREEN_FAN_TEXT_Y); + lcd_print(itostr3(per)); + u8g.print('%'); + } + } + #endif + } + + #if ENABLED(SDSUPPORT) + // + // SD Card Symbol + // + if (card.isFileOpen() && PAGE_CONTAINS(42 - (TALL_FONT_CORRECTION), 51 - (TALL_FONT_CORRECTION))) { + // Upper box + u8g.drawBox(42, 42 - (TALL_FONT_CORRECTION), 8, 7); // 42-48 (or 41-47) + // Right edge + u8g.drawBox(50, 44 - (TALL_FONT_CORRECTION), 2, 5); // 44-48 (or 43-47) + // Bottom hollow box + u8g.drawFrame(42, 49 - (TALL_FONT_CORRECTION), 10, 4); // 49-52 (or 48-51) + // Corner pixel + u8g.drawPixel(50, 43 - (TALL_FONT_CORRECTION)); // 43 (or 42) + } + #endif // SDSUPPORT + + #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + // + // Progress bar frame + // + #define PROGRESS_BAR_X 54 + #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X) + + if (PAGE_CONTAINS(49, 52 - (TALL_FONT_CORRECTION))) // 49-52 (or 49-51) + u8g.drawFrame( + PROGRESS_BAR_X, 49, + PROGRESS_BAR_WIDTH, 4 - (TALL_FONT_CORRECTION) + ); + + #if DISABLED(LCD_SET_PROGRESS_MANUALLY) + const uint8_t progress_bar_percent = card.percentDone(); + #endif + + if (progress_bar_percent > 1) { + + // + // Progress bar solid part + // + + if (PAGE_CONTAINS(50, 51 - (TALL_FONT_CORRECTION))) // 50-51 (or just 50) + u8g.drawBox( + PROGRESS_BAR_X + 1, 50, + (uint16_t)((PROGRESS_BAR_WIDTH - 2) * progress_bar_percent * 0.01), 2 - (TALL_FONT_CORRECTION) + ); + + // + // SD Percent Complete + // + + #if ENABLED(DOGM_SD_PERCENT) + if (PAGE_CONTAINS(41, 48)) { + // Percent complete + u8g.setPrintPos(55, 48); + u8g.print(itostr3(progress_bar_percent)); + u8g.print('%'); + } + #endif + } + + // + // Elapsed Time + // + + #if DISABLED(DOGM_SD_PERCENT) + #define SD_DURATION_X (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH / 2) - len * (DOG_CHAR_WIDTH / 2)) + #else + #define SD_DURATION_X (LCD_PIXEL_WIDTH - len * DOG_CHAR_WIDTH) + #endif + + if (PAGE_CONTAINS(41, 48)) { + char buffer[10]; + duration_t elapsed = print_job_timer.duration(); + bool has_days = (elapsed.value >= 60*60*24L); + uint8_t len = elapsed.toDigital(buffer, has_days); + u8g.setPrintPos(SD_DURATION_X, 48); + lcd_print(buffer); + } + + #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + + // + // XYZ Coordinates + // + + #if ENABLED(USE_SMALL_INFOFONT) + #define INFO_FONT_HEIGHT 7 + #else + #define INFO_FONT_HEIGHT 8 + #endif + + #define XYZ_BASELINE (30 + INFO_FONT_HEIGHT) + + #define X_LABEL_POS 3 + #define X_VALUE_POS 11 + #define XYZ_SPACING 40 + + #if ENABLED(XYZ_HOLLOW_FRAME) + #define XYZ_FRAME_TOP 29 + #define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 3 + #else + #define XYZ_FRAME_TOP 30 + #define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 1 + #endif + + // Before homing the axis letters are blinking 'X' <-> '?'. + // When axis is homed but axis_known_position is false the axis letters are blinking 'X' <-> ' '. + // When everything is ok you see a constant 'X'. + + static char xstring[5], ystring[5], zstring[7]; + #if ENABLED(FILAMENT_LCD_DISPLAY) + static char wstring[5], mstring[4]; + #endif + + // At the first page, regenerate the XYZ strings + if (page.page == 0) { + strcpy(xstring, ftostr4sign(LOGICAL_X_POSITION(current_position[X_AXIS]))); + strcpy(ystring, ftostr4sign(LOGICAL_Y_POSITION(current_position[Y_AXIS]))); + strcpy(zstring, ftostr52sp(FIXFLOAT(LOGICAL_Z_POSITION(current_position[Z_AXIS])))); + #if ENABLED(FILAMENT_LCD_DISPLAY) + strcpy(wstring, ftostr12ns(filament_width_meas)); + strcpy(mstring, itostr3(100.0 * ( + parser.volumetric_enabled + ? planner.volumetric_area_nominal / planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] + : planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] + ) + )); + #endif + } + + if (PAGE_CONTAINS(XYZ_FRAME_TOP, XYZ_FRAME_TOP + XYZ_FRAME_HEIGHT - 1)) { + + #if ENABLED(XYZ_HOLLOW_FRAME) + u8g.drawFrame(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 29-40 7: 29-39 + #else + u8g.drawBox(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 30-39 7: 30-37 + #endif + + if (PAGE_CONTAINS(XYZ_BASELINE - (INFO_FONT_HEIGHT - 1), XYZ_BASELINE)) { + + #if DISABLED(XYZ_HOLLOW_FRAME) + u8g.setColorIndex(0); // white on black + #endif + + u8g.setPrintPos(0 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); + _draw_axis_label(X_AXIS, PSTR(MSG_X), blink); + u8g.setPrintPos(0 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); + lcd_print(xstring); + + u8g.setPrintPos(1 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); + _draw_axis_label(Y_AXIS, PSTR(MSG_Y), blink); + u8g.setPrintPos(1 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); + lcd_print(ystring); + + u8g.setPrintPos(2 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); + _draw_axis_label(Z_AXIS, PSTR(MSG_Z), blink); + u8g.setPrintPos(2 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); + lcd_print(zstring); + + #if DISABLED(XYZ_HOLLOW_FRAME) + u8g.setColorIndex(1); // black on white + #endif + } + } + + // + // Feedrate + // + + if (PAGE_CONTAINS(51 - INFO_FONT_HEIGHT, 49)) { + lcd_setFont(FONT_MENU); + u8g.setPrintPos(3, 50); + lcd_print(LCD_STR_FEEDRATE[0]); + + lcd_setFont(FONT_STATUSMENU); + u8g.setPrintPos(12, 50); + lcd_print(itostr3(feedrate_percentage)); + u8g.print('%'); + + // + // Filament sensor display if SD is disabled + // + #if ENABLED(FILAMENT_LCD_DISPLAY) && DISABLED(SDSUPPORT) + u8g.setPrintPos(56, 50); + lcd_print(wstring); + u8g.setPrintPos(102, 50); + lcd_print(mstring); + u8g.print('%'); + lcd_setFont(FONT_MENU); + u8g.setPrintPos(47, 50); + lcd_print(LCD_STR_FILAM_DIA); + u8g.setPrintPos(93, 50); + lcd_print(LCD_STR_FILAM_MUL); + #endif + } + + // + // Status line + // + + #define STATUS_BASELINE (55 + INFO_FONT_HEIGHT) + + if (PAGE_CONTAINS(STATUS_BASELINE - (INFO_FONT_HEIGHT - 1), STATUS_BASELINE)) { + u8g.setPrintPos(0, STATUS_BASELINE); + + #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) + if (PENDING(millis(), previous_lcd_status_ms + 5000UL)) { //Display both Status message line and Filament display on the last line + lcd_implementation_status_message(blink); + } + else { + lcd_printPGM(PSTR(LCD_STR_FILAM_DIA)); + u8g.print(':'); + lcd_print(wstring); + lcd_printPGM(PSTR(" " LCD_STR_FILAM_MUL)); + u8g.print(':'); + lcd_print(mstring); + u8g.print('%'); + } + #else + lcd_implementation_status_message(blink); + #endif + } +} + +#endif // _STATUS_SCREEN_DOGM_H_ diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h new file mode 100644 index 000000000..e05d58749 --- /dev/null +++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h @@ -0,0 +1,853 @@ +/** + * Lightweight Status Screen for the RepRapDiscount Full + * Graphics Smart Controller (ST7920-based 128x64 LCD) + * + * (c) 2017 Aleph Objects, Inc. + * + * The code in this page is free software: you can + * redistribute it and/or modify it under the terms of the GNU + * General Public License (GNU GPL) as published by the Free Software + * Foundation, either version 3 of the License, or (at your option) + * any later version. The code is distributed WITHOUT ANY WARRANTY; + * without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. + * + */ + +/** + * Implementation of a Status Screen for the RepRapDiscount + * Full Graphics Smart Controller using native ST7920 commands + * instead of U8Glib. + * + * This alternative Status Screen makes use of the built-in character + * generation capabilities of the ST7920 to update the Status Screen + * with less SPI traffic and CPU use. In particular: + * + * - The fan and bed animations are handled using custom characters + * that are stored in CGRAM. This allows for the animation to be + * updated by writing a single character to the text-buffer (DDRAM). + * + * - All the information in the Status Screen is text that is written + * to DDRAM, so the work of generating the bitmaps is offloaded to + * the ST7920 rather than being render by U8Glib on the MCU. + * + * - The graphics buffer (GDRAM) is only used for static graphics + * elements (nozzle and feedrate bitmaps) and for the progress + * bar, so updates are sporadic. + */ + +#include "status_screen_lite_ST7920_class.h" + +#include "../../libs/duration_t.h" + +#define BUFFER_WIDTH 256 +#define BUFFER_HEIGHT 32 + +#define DDRAM_LINE_1 0x00 +#define DDRAM_LINE_2 0x10 +#define DDRAM_LINE_3 0x08 +#define DDRAM_LINE_4 0x18 + +ST7920_Lite_Status_Screen::st7920_state_t ST7920_Lite_Status_Screen::current_bits; + +void ST7920_Lite_Status_Screen::cmd(const uint8_t cmd) { + if (!current_bits.synced || !current_bits.cmd) { + current_bits.synced = true; + current_bits.cmd = true; + sync_cmd(); + } + write_byte(cmd); +} + +void ST7920_Lite_Status_Screen::begin_data() { + if (!current_bits.synced || current_bits.cmd) { + current_bits.synced = true; + current_bits.cmd = false; + sync_dat(); + } +} + +void ST7920_Lite_Status_Screen::write_str(const char *str) { + while (*str) write_byte(*str++); +} + +void ST7920_Lite_Status_Screen::write_str(const char *str, uint8_t len) { + while (*str && len--) write_byte(*str++); +} + +void ST7920_Lite_Status_Screen::write_str_P(const char * const str) { + const char *p_str = (const char *)str; + while (char c = pgm_read_byte_near(p_str++)) write_byte(c); +} + +void ST7920_Lite_Status_Screen::write_str(progmem_str str) { + write_str_P((const char*)str); +} + +void ST7920_Lite_Status_Screen::write_number(const int16_t value, const uint8_t digits/*=3*/) { + char str[7]; + const char *fmt; + switch (digits) { + case 6: fmt = PSTR("%6d"); break; + case 5: fmt = PSTR("%5d"); break; + case 4: fmt = PSTR("%4d"); break; + case 3: fmt = PSTR("%3d"); break; + case 2: fmt = PSTR("%2d"); break; + case 1: fmt = PSTR("%1d"); break; + } + sprintf_P(str, fmt, value); + write_str(str); +} + +void ST7920_Lite_Status_Screen::display_status(const bool display_on, const bool cursor_on, const bool blink_on) { + extended_function_set(false); + cmd(0b00001000 | + (display_on ? 0b0100 : 0) | + (cursor_on ? 0b0010 : 0) | + (blink_on ? 0b0001 : 0) + ); +} + +// Sets the extended and graphics bits simultaneously, regardless of +// the current state. This is a helper function for extended_function_set() +// and graphics() +void ST7920_Lite_Status_Screen::_extended_function_set(const bool extended, const bool graphics) { + cmd( 0b00100000 | + (extended ? 0b00000100 : 0) | + (graphics ? 0b00000010 : 0) + ); + current_bits.extended = extended; + current_bits.graphics = graphics; +} + +void ST7920_Lite_Status_Screen::extended_function_set(const bool extended) { + if (extended != current_bits.extended) + _extended_function_set(extended, current_bits.graphics); +} + +void ST7920_Lite_Status_Screen::graphics(const bool graphics) { + if (graphics != current_bits.graphics) + _extended_function_set(current_bits.extended, graphics); +} + +void ST7920_Lite_Status_Screen::entry_mode_select(const bool ac_increase, const bool shift) { + extended_function_set(false); + cmd(0b00000100 | + (ac_increase ? 0b00000010 : 0) | + (shift ? 0b00000001 : 0) + ); +} + +// Sets the sa bit regardless of the current state. This is a helper +// function for scroll_or_addr_select() +void ST7920_Lite_Status_Screen::_scroll_or_addr_select(const bool sa) { + extended_function_set(true); + cmd(0b00100010 | + (sa ? 0b000001 : 0) + ); + current_bits.sa = sa; +} + +void ST7920_Lite_Status_Screen::scroll_or_addr_select(const bool sa) { + if (sa != current_bits.sa) + _scroll_or_addr_select(sa); +} + +void ST7920_Lite_Status_Screen::set_ddram_address(const uint8_t addr) { + extended_function_set(false); + cmd(0b10000000 | (addr & 0b00111111)); +} + +void ST7920_Lite_Status_Screen::set_cgram_address(const uint8_t addr) { + extended_function_set(false); + cmd(0b01000000 | (addr & 0b00111111)); +} + +void ST7920_Lite_Status_Screen::set_gdram_address(const uint8_t x, const uint8_t y) { + extended_function_set(true); + cmd(0b10000000 | (y & 0b01111111)); + cmd(0b10000000 | (x & 0b00001111)); +} + +void ST7920_Lite_Status_Screen::clear() { + extended_function_set(false); + cmd(0x00000001); + delay(15); //delay for CGRAM clear +} + +void ST7920_Lite_Status_Screen::home() { + extended_function_set(false); + cmd(0x00000010); +} + +/* This fills the entire text buffer with spaces */ +void ST7920_Lite_Status_Screen::clear_ddram() { + set_ddram_address(DDRAM_LINE_1); + begin_data(); + for (uint8_t i = 64; i--;) write_byte(' '); +} + +/* This fills the entire graphics buffer with zeros */ +void ST7920_Lite_Status_Screen::clear_gdram() { + for (uint8_t y = 0; y < BUFFER_HEIGHT; y++) { + set_gdram_address(0, y); + begin_data(); + for (uint8_t i = (BUFFER_WIDTH) / 16; i--;) write_word(0); + } +} + +void ST7920_Lite_Status_Screen::load_cgram_icon(const uint16_t addr, const void *data) { + const uint16_t *p_word = (const uint16_t *)data; + set_cgram_address(addr); + begin_data(); + for (uint8_t i = 16; i--;) + write_word(pgm_read_word_near(p_word++)); +} + +/** + * Draw an icon in GDRAM. Position specified in DDRAM + * coordinates. i.e., X from 1 to 8, Y from 1 to 4. + */ +void ST7920_Lite_Status_Screen::draw_gdram_icon(uint8_t x, uint8_t y, const void *data) { + const uint16_t *p_word = (const uint16_t *)data; + if (y > 2) { // Handle display folding + y -= 2; + x += 8; + } + --x; + --y; + for (int i = 0; i < 16; i++) { + set_gdram_address(x, i + y * 16); + begin_data(); + write_word(pgm_read_word_near(p_word++)); + } +} + +/************************** ICON DEFINITIONS *************************************/ + +#define CGRAM_ICON_1_ADDR 0x00 +#define CGRAM_ICON_2_ADDR 0x10 +#define CGRAM_ICON_3_ADDR 0x20 +#define CGRAM_ICON_4_ADDR 0x30 + +#define CGRAM_ICON_1_WORD 0x00 +#define CGRAM_ICON_2_WORD 0x02 +#define CGRAM_ICON_3_WORD 0x04 +#define CGRAM_ICON_4_WORD 0x06 + +const uint16_t nozzle_icon[] PROGMEM = { + 0b0000000000000000, + 0b0000000000000000, + 0b0000111111110000, + 0b0001111111111000, + 0b0001111111111000, + 0b0001111111111000, + 0b0000111111110000, + 0b0000111111110000, + 0b0001111111111000, + 0b0001111111111000, + 0b0001111111111000, + 0b0000011111100000, + 0b0000001111000000, + 0b0000000110000000, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t bed_icon[] PROGMEM = { + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0111111111111110, + 0b0111111111111110, + 0b0110000000000110, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t heat1_icon[] PROGMEM = { + 0b0000000000000000, + 0b0010001000100000, + 0b0001000100010000, + 0b0000100010001000, + 0b0000100010001000, + 0b0001000100010000, + 0b0010001000100000, + 0b0010001000100000, + 0b0001000100010000, + 0b0000100010001000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t heat2_icon[] PROGMEM = { + 0b0000000000000000, + 0b0000100010001000, + 0b0000100010001000, + 0b0001000100010000, + 0b0010001000100000, + 0b0010001000100000, + 0b0001000100010000, + 0b0000100010001000, + 0b0000100010001000, + 0b0001000100010000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t fan1_icon[] PROGMEM = { + 0b0000000000000000, + 0b0111111111111110, + 0b0111000000001110, + 0b0110001111000110, + 0b0100001111000010, + 0b0100000110000010, + 0b0101100000011010, + 0b0101110110111010, + 0b0101100000011010, + 0b0100000110000010, + 0b0100001111000010, + 0b0110001111000110, + 0b0111000000001110, + 0b0111111111111110, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t fan2_icon[] PROGMEM = { + 0b0000000000000000, + 0b0111111111111110, + 0b0111000000001110, + 0b0110010000100110, + 0b0100111001110010, + 0b0101111001111010, + 0b0100110000110010, + 0b0100000110000010, + 0b0100110000110010, + 0b0101111001111010, + 0b0100111001110010, + 0b0110010000100110, + 0b0111000000001110, + 0b0111111111111110, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t feedrate_icon[] PROGMEM = { + 0b0000000000000000, + 0b0111111000000000, + 0b0100000000000000, + 0b0100000000000000, + 0b0100000000000000, + 0b0111111011111000, + 0b0100000010000100, + 0b0100000010000100, + 0b0100000010000100, + 0b0100000011111000, + 0b0000000010001000, + 0b0000000010000100, + 0b0000000010000100, + 0b0000000010000010, + 0b0000000000000000, + 0b0000000000000000 +}; + +/************************** MAIN SCREEN *************************************/ + +void ST7920_Lite_Status_Screen::draw_static_elements() { + scroll_or_addr_select(0); + + // Load the animated bed and fan icons + load_cgram_icon(CGRAM_ICON_1_ADDR, heat1_icon); + load_cgram_icon(CGRAM_ICON_2_ADDR, heat2_icon); + load_cgram_icon(CGRAM_ICON_3_ADDR, fan1_icon); + load_cgram_icon(CGRAM_ICON_4_ADDR, fan2_icon); + + // Draw the static icons in GDRAM + draw_gdram_icon(1, 1, nozzle_icon); + #if EXTRUDERS == 2 + draw_gdram_icon(1,2,nozzle_icon); + draw_gdram_icon(1,3,bed_icon); + #else + draw_gdram_icon(1,2,bed_icon); + #endif + draw_gdram_icon(6,2,feedrate_icon); + + // Draw the initial fan icon + draw_fan_icon(false); +} + +/** + * Although this is undocumented, the ST7920 allows the character + * data buffer (DDRAM) to be used in conjunction with the graphics + * bitmap buffer (CGRAM). The contents of the graphics buffer is + * XORed with the data from the character generator. This allows + * us to make the progess bar out of graphical data (the bar) and + * text data (the percentage). + */ +void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) { + #if EXTRUDERS == 1 + // If we have only one extruder, draw a long progress bar on the third line + const uint8_t top = 1, // Top in pixels + bottom = 13, // Bottom in pixels + left = 8, // Left edge, in 16-bit words + width = 5; // Width of progress bar, in 16-bit words + #else + const uint8_t top = 16 + 1, // Top in pixels + bottom = 16 + 13, // Bottom in pixels + left = 5, // Left edge, in 16-bit words + width = 3; // Width of progress bar, in 16-bit words + #endif + const uint8_t char_pcnt = 100 / width; // How many percent does each 16-bit word represent? + + // Draw the progress bar as a bitmap in CGRAM + for (uint8_t y = top; y <= bottom; y++) { + set_gdram_address(left, y); + begin_data(); + for (uint8_t x = 0; x < width; x++) { + uint16_t gfx_word = 0x0000; + if ((x + 1) * char_pcnt <= value) + gfx_word = 0xFFFF; // Draw completely filled bytes + else if ((x * char_pcnt) < value) + gfx_word = int(0x8000) >> (value % char_pcnt) * 16 / char_pcnt; // Draw partially filled bytes + + // Draw the frame around the progress bar + if (y == top || y == bottom) + gfx_word = 0xFFFF; // Draw top/bottom border + else if (x == width - 1) + gfx_word |= 0x0001; // Draw right border + else if (x == 0) + gfx_word |= 0x8000; // Draw left border + write_word(gfx_word); + } + } + + // Draw the percentage as text in DDRAM + set_ddram_address( + #if EXTRUDERS == 1 + DDRAM_LINE_3 + 1 + #else + DDRAM_LINE_2 + left + #endif + ); + + begin_data(); + if (value > 9) { + write_number(value, 4); + write_str(F("% ")); + } + else { + write_number(value, 3); + write_str(F("% ")); + } +} + +void ST7920_Lite_Status_Screen::draw_fan_icon(const bool whichIcon) { + set_ddram_address(DDRAM_LINE_1 + 5); + begin_data(); + write_word(whichIcon ? CGRAM_ICON_3_WORD : CGRAM_ICON_4_WORD); +} + +void ST7920_Lite_Status_Screen::draw_heat_icon(const bool whichIcon, const bool heating) { + set_ddram_address( + #if EXTRUDERS == 1 + DDRAM_LINE_2 + #else + DDRAM_LINE_3 + #endif + ); + begin_data(); + if (heating) + write_word(whichIcon ? CGRAM_ICON_1_WORD : CGRAM_ICON_2_WORD); + else { + write_byte(' '); + write_byte(' '); + } +} + +#define FAR(a,b) (((a > b) ? (a-b) : (b-a)) > 1) + +void ST7920_Lite_Status_Screen::draw_extruder_1_temp(const int16_t temp, const int16_t target) { + set_ddram_address(DDRAM_LINE_1 + 1); + begin_data(); + write_number(temp); + if (target && FAR(temp, target)) { + write_str(F("\x1A")); + write_number(target); + } + else + write_str(F(" ")); +} + +void ST7920_Lite_Status_Screen::draw_extruder_2_temp(const int16_t temp, const int16_t target) { + set_ddram_address(DDRAM_LINE_2 + 1); + begin_data(); + write_number(temp); + if (target && FAR(temp, target)) { + write_str(F("\x1A")); + write_number(target); + } + else + write_str(F(" ")); +} + +void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target) { + set_ddram_address( + #if EXTRUDERS == 1 + DDRAM_LINE_2 + 1 + #else + DDRAM_LINE_3 + 1 + #endif + ); + begin_data(); + write_number(temp); + if (target && FAR(temp, target)) { + write_str(F("\x1A")); + write_number(target); + } + else + write_str(F(" ")); +} + +void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) { + set_ddram_address(DDRAM_LINE_1 + 6); + begin_data(); + write_number(value, 4); +} + +void ST7920_Lite_Status_Screen::draw_print_time(const uint32_t elapsed) { + const uint8_t hrs = elapsed / 3600, + min = (elapsed / 60) % 60; + char str[7]; + sprintf_P(str, hrs > 99 ? PSTR("%03d:%02d") : PSTR(" %02d:%02d"), hrs, min); + + set_ddram_address(DDRAM_LINE_3 + 5); + begin_data(); + write_str(str); +} + +void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentage) { + // We only have enough room for the feedrate when + // we have one extruder + #if EXTRUDERS == 1 + set_ddram_address(DDRAM_LINE_2 + 6); + begin_data(); + write_number(percentage, 4); + #endif +} + +void ST7920_Lite_Status_Screen::draw_status_message(const char *str) { + set_ddram_address(DDRAM_LINE_4); + begin_data(); + #if ENABLED(STATUS_MESSAGE_SCROLLING) + const uint8_t lcd_len = 16; + const uint8_t padding = 2; + uint8_t str_len = strlen(str); + + // Trim whitespace at the end of the str, as for some reason + // messages like "Card Inserted" are padded with many spaces + while (str_len > 0 && str[str_len - 1] == ' ') str_len--; + + if (str_len <= lcd_len) { + // It all fits on the LCD without scrolling + write_str(str); + } + else { + // Print the message repeatedly until covering the LCD + uint8_t c = status_scroll_pos; + for (uint8_t n = 0; n < lcd_len; n++) { + write_byte(c < str_len ? str[c] : ' '); + c++; + c %= str_len + padding; // Wrap around + } + + // Scroll the message + if (status_scroll_pos == str_len + padding) + status_scroll_pos = 0; + else + status_scroll_pos++; + } + #else + write_str(str, 16); + #endif +} + +void ST7920_Lite_Status_Screen::draw_position(const float x, const float y, const float z, bool position_known) { + char str[7]; + set_ddram_address(DDRAM_LINE_4); + begin_data(); + + // If position is unknown, flash the labels. + const unsigned char alt_label = position_known ? 0 : (lcd_blink() ? ' ' : 0); + + dtostrf(x, -4, 0, str); + write_byte(alt_label ? alt_label : 'X'); + write_str(str, 4); + + dtostrf(y, -4, 0, str); + write_byte(alt_label ? alt_label : 'Y'); + write_str(str, 4); + + dtostrf(z, -5, 1, str); + write_byte(alt_label ? alt_label : 'Z'); + write_str(str, 5); +} + +bool ST7920_Lite_Status_Screen::indicators_changed() { + // We only add the target temperatures to the checksum + // because the actual temps fluctuate so by updating + // them only during blinks we gain a bit of stability. + const bool blink = lcd_blink(); + const uint8_t feedrate_perc = feedrate_percentage; + const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; + const float extruder_1_target = thermalManager.degTargetHotend(0); + #if EXTRUDERS == 2 + const float extruder_2_target = thermalManager.degTargetHotend(1); + #endif + const float bed_target = thermalManager.degTargetBed(); + + static uint8_t last_checksum = 0; + + const uint8_t checksum = + uint8_t(blink) ^ + uint8_t(feedrate_perc) ^ + uint8_t(fan_speed) ^ + uint8_t(extruder_1_target) ^ + #if EXTRUDERS == 2 + uint8_t(extruder_2_target) ^ + #endif + uint8_t(bed_target); + + if (last_checksum == checksum) return false; + + last_checksum = checksum; + return true; +} + +void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) { + if (forceUpdate || indicators_changed()) { + const bool blink = lcd_blink(); + const duration_t elapsed = print_job_timer.duration(); + const uint32_t seconds_elapsed = elapsed.value; + const uint8_t feedrate_perc = feedrate_percentage; + const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; + const float extruder_1_temp = thermalManager.degHotend(0); + const float extruder_1_target = thermalManager.degTargetHotend(0); + #if EXTRUDERS == 2 + const float extruder_2_temp = thermalManager.degHotend(1); + const float extruder_2_target = thermalManager.degTargetHotend(1); + #endif + const float bed_temp = thermalManager.degBed(); + const float bed_target = thermalManager.degTargetBed(); + + draw_extruder_1_temp(extruder_1_temp, extruder_1_target); + #if EXTRUDERS == 2 + draw_extruder_2_temp(extruder_2_temp, extruder_2_target); + #endif + draw_bed_temp(bed_temp, bed_target); + draw_fan_speed(fan_speed); + draw_print_time(seconds_elapsed); + draw_feedrate_percentage(feedrate_perc); + + // Update the fan and bed animations + if (fan_speed > 0) draw_fan_icon(blink); + if (bed_target > 0) + draw_heat_icon(blink, true); + else + draw_heat_icon(false, false); + } +} + +bool ST7920_Lite_Status_Screen::position_changed() { + const float x_pos = current_position[X_AXIS], + y_pos = current_position[Y_AXIS], + z_pos = current_position[Z_AXIS]; + const uint8_t checksum = uint8_t(x_pos) ^ uint8_t(y_pos) ^ uint8_t(z_pos); + + static uint8_t last_checksum = 0; + if (last_checksum == checksum) return false; + last_checksum = checksum; + return true; +} + +bool ST7920_Lite_Status_Screen::status_changed() { + uint8_t checksum = 0; + for (const char *p = lcd_status_message; *p; p++) checksum ^= *p; + + static uint8_t last_checksum = 0; + if (last_checksum == checksum) return false; + last_checksum = checksum; + return true; +} + +bool ST7920_Lite_Status_Screen::blink_changed() { + static uint8_t last_blink = 0; + const bool blink = lcd_blink(); + if (last_blink == blink) return false; + last_blink = blink; + return true; +} + +void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) { + static uint8_t countdown = 0; + + /** + * There is only enough room in the display for either the + * status message or the position, not both, so we choose + * one or another. Whenever the status message changes, + * we show it for a number of consecutive seconds, but + * then go back to showing the position as soon as the + * head moves, i.e: + * + * countdown > 1 -- Show status + * countdown = 1 -- Show status, until movement + * countdown = 0 -- Show position + */ + if (forceUpdate || status_changed()) { + #if ENABLED(STATUS_MESSAGE_SCROLLING) + status_scroll_pos = 0; + #endif + #ifndef STATUS_EXPIRE_SECONDS + #define STATUS_EXPIRE_SECONDS 20 + #endif + countdown = lcd_strlen(lcd_status_message) ? STATUS_EXPIRE_SECONDS : 0; + draw_status_message(lcd_status_message); + blink_changed(); // Clear changed flag + } + else if (countdown > 1 && blink_changed()) { + countdown--; + #if ENABLED(STATUS_MESSAGE_SCROLLING) + draw_status_message(lcd_status_message); + #endif + } + else if (countdown > 0 && blink_changed()) { + if (position_changed()) { + countdown--; + forceUpdate = true; + } + #if ENABLED(STATUS_MESSAGE_SCROLLING) + draw_status_message(lcd_status_message); + #endif + } + if (countdown == 0 && (forceUpdate || position_changed() || + #if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) + blink_changed() + #endif + )) { + draw_position( + current_position[X_AXIS], + current_position[Y_AXIS], + current_position[Z_AXIS], + #if ENABLED(DISABLE_REDUCED_ACCURACY_WARNING) + true + #else + axis_known_position[X_AXIS] && + axis_known_position[Y_AXIS] && + axis_known_position[Z_AXIS] + #endif + ); + } +} + +void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) { + const uint8_t percent_done = + #if ENABLED(SDSUPPORT) + card.percentDone() + #else + 0 + #endif + ; + + // Since the progress bar involves writing + // quite a few bytes to GDRAM, only do this + // when an update is actually necessary. + + static uint8_t last_progress = 0; + if (!forceUpdate && last_progress == percent_done) return; + last_progress = percent_done; + + draw_progress_bar(percent_done); +} + +void ST7920_Lite_Status_Screen::update(const bool forceUpdate) { + cs(); + update_indicators(forceUpdate); + update_status_or_position(forceUpdate); + update_progress(forceUpdate); + ncs(); +} + +void ST7920_Lite_Status_Screen::reset_state_from_unknown() { + _extended_function_set(true, true); // Do it twice as only one bit + _extended_function_set(true, true); // get set at a time. + _scroll_or_addr_select(false); +} + +void ST7920_Lite_Status_Screen::on_entry() { + cs(); + reset_state_from_unknown(); + clear(); + clear_gdram(); + draw_static_elements(); + update(true); + ncs(); +} + +void ST7920_Lite_Status_Screen::on_exit() { + cs(); + clear(); + _extended_function_set(true, true); // Restore state to what u8g expects. + ncs(); +} + +// This is called prior to the KILL screen to +// clear the screen so we don't end up with a +// garbled display. +void ST7920_Lite_Status_Screen::clear_text_buffer() { + cs(); + reset_state_from_unknown(); + clear(); + _extended_function_set(true, true); // Restore state to what u8g expects. + ncs(); +} + +static void lcd_implementation_status_screen() { + ST7920_Lite_Status_Screen::update(false); +} + +/** + * In order to properly update the lite Status Screen, + * we must know when we have entered and left the + * Status Screen. Since the ultralcd code is not + * set up for doing this, we call this function before + * each update indicating whether the current screen + * is the Status Screen. + * + * This function keeps track of whether we have left or + * entered the Status Screen and calls the on_entry() + * and on_exit() methods for cleanup. + */ +static void lcd_in_status(const bool inStatus) { + static bool lastInStatus = false; + if (lastInStatus == inStatus) return; + if ((lastInStatus = inStatus)) + ST7920_Lite_Status_Screen::on_entry(); + else + ST7920_Lite_Status_Screen::on_exit(); +} diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920_class.h b/Marlin/src/lcd/dogm/status_screen_lite_ST7920_class.h new file mode 100644 index 000000000..5812e4751 --- /dev/null +++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920_class.h @@ -0,0 +1,108 @@ +/** + * Lightweight Status Screen for the RepRapDiscount Full + * Graphics Smart Controller (ST7920-based 128x64 LCD) + * + * (c) 2017 Aleph Objects, Inc. + * + * The code in this page is free software: you can + * redistribute it and/or modify it under the terms of the GNU + * General Public License (GNU GPL) as published by the Free Software + * Foundation, either version 3 of the License, or (at your option) + * any later version. The code is distributed WITHOUT ANY WARRANTY; + * without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. + * + */ + +#ifndef STATUS_SCREEN_LITE_ST7920_CLASS_H +#define STATUS_SCREEN_LITE_ST7920_CLASS_H + +#include "../../core/macros.h" + +typedef const __FlashStringHelper *progmem_str; + +class ST7920_Lite_Status_Screen { + private: + static struct st7920_state_t { + uint8_t synced : 1; // Whether a sync has been sent + uint8_t cmd : 1; // Whether the sync was cmd or data + uint8_t extended : 1; + uint8_t graphics : 1; + uint8_t sa : 1; + } current_bits; + + static void cs(); + static void ncs(); + static void sync_cmd(); + static void sync_dat(); + static void write_byte(const uint8_t w); + + FORCE_INLINE static void write_word(const uint16_t w) { + write_byte((w >> 8) & 0xFF); + write_byte((w >> 0) & 0xFF); + } + + static void cmd(const uint8_t cmd); + static void begin_data(); + + static void write_str(const char *str); + static void write_str(const char *str, const uint8_t len); + static void write_str_P(const char * const str); + static void write_str(progmem_str str); + static void write_number(const int16_t value, const uint8_t digits=3); + + static void _extended_function_set(const bool extended, const bool graphics); + static void _scroll_or_addr_select(const bool sa); + static void reset_state_from_unknown(); + + static void home(); + static void display_status(const bool display_on, const bool cursor_on, const bool blink_on); + static void extended_function_set(const bool extended); + static void graphics(const bool graphics); + static void entry_mode_select(const bool ac_increase, const bool shift); + static void scroll_or_addr_select(const bool sa); + static void set_ddram_address(const uint8_t addr); + static void set_cgram_address(const uint8_t addr); + static void set_gdram_address(const uint8_t x, const uint8_t y); + + static void clear(); + static void clear_ddram(); + static void clear_gdram(); + + static void load_cgram_icon(const uint16_t addr, const void *data); + static void draw_gdram_icon(uint8_t x, uint8_t y, const void *data); + + static uint8_t string_checksum(const char *str); + + protected: + static void draw_static_elements(); + static void draw_progress_bar(const uint8_t value); + static void draw_fan_icon(const bool whichIcon); + static void draw_heat_icon(const bool whichIcon, const bool heating); + static void draw_extruder_1_temp(const int16_t temp, const int16_t target); + static void draw_extruder_2_temp(const int16_t temp, const int16_t target); + static void draw_bed_temp(const int16_t temp, const int16_t target); + static void draw_fan_speed(const uint8_t value); + static void draw_print_time(const uint32_t elapsed); + static void draw_feedrate_percentage(const uint8_t percentage); + static void draw_status_message(const char *str); + static void draw_position(const float x, const float y, const float z, bool position_known = true); + + static bool indicators_changed(); + static bool position_changed(); + static bool blink_changed(); + static bool status_changed(); + + static void update_indicators(const bool forceUpdate); + static void update_position(const bool forceUpdate, bool resetChecksum); + static void update_status_or_position(bool forceUpdate); + static void update_progress(const bool forceUpdate); + + public: + static void update(const bool forceUpdate); + static void on_entry(); + static void on_exit(); + static void clear_text_buffer(); +}; + +#endif // STATUS_SCREEN_LITE_ST7920_CLASS_H diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920_spi.h b/Marlin/src/lcd/dogm/status_screen_lite_ST7920_spi.h new file mode 100644 index 000000000..9c59068f4 --- /dev/null +++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920_spi.h @@ -0,0 +1,39 @@ +/** + * Lightweight Status Screen for the RepRapDiscount Full + * Graphics Smart Controller (ST7920-based 128x64 LCD) + * + * (c) 2017 Aleph Objects, Inc. + * + * The code in this page is free software: you can + * redistribute it and/or modify it under the terms of the GNU + * General Public License (GNU GPL) as published by the Free Software + * Foundation, either version 3 of the License, or (at your option) + * any later version. The code is distributed WITHOUT ANY WARRANTY; + * without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. + * + */ + +#include "status_screen_lite_ST7920_class.h" + +void ST7920_Lite_Status_Screen::cs() { + ST7920_CS(); + current_bits.synced = false; +} + +void ST7920_Lite_Status_Screen::ncs() { + ST7920_NCS(); + current_bits.synced = false; +} + +void ST7920_Lite_Status_Screen::sync_cmd() { + ST7920_SET_CMD(); +} + +void ST7920_Lite_Status_Screen::sync_dat() { + ST7920_SET_DAT(); +} + +void ST7920_Lite_Status_Screen::write_byte(const uint8_t data) { + ST7920_WRITE_BYTE(data); +} diff --git a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp index 58d99e594..91692eb62 100644 --- a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp +++ b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp @@ -125,10 +125,12 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo ST7920_CS(); u8g_Delay(120); //initial delay for boot up ST7920_SET_CMD(); + ST7920_WRITE_BYTE(0x20); //non-extended mode ST7920_WRITE_BYTE(0x08); //display off, cursor+blink off - ST7920_WRITE_BYTE(0x01); //clear CGRAM ram - u8g_Delay(15); //delay for CGRAM clear - ST7920_WRITE_BYTE(0x3E); //extended mode + GDRAM active + ST7920_WRITE_BYTE(0x01); //clear DDRAM ram + u8g_Delay(15); //delay for DDRAM clear + ST7920_WRITE_BYTE(0x24); //extended mode + ST7920_WRITE_BYTE(0x26); //extended mode + GDRAM active for (y = 0; y < (LCD_PIXEL_HEIGHT) / 2; y++) { //clear GDRAM ST7920_WRITE_BYTE(0x80 | y); //set y ST7920_WRITE_BYTE(0x80); //set x = 0 @@ -182,6 +184,12 @@ uint8_t u8g_dev_st7920_128x64_rrd_buf[(LCD_PIXEL_WIDTH) * (PAGE_HEIGHT) / 8] U u8g_pb_t u8g_dev_st7920_128x64_rrd_pb = {{PAGE_HEIGHT, LCD_PIXEL_HEIGHT, 0, 0, 0}, LCD_PIXEL_WIDTH, u8g_dev_st7920_128x64_rrd_buf}; u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = {u8g_dev_rrd_st7920_128x64_fn, &u8g_dev_st7920_128x64_rrd_pb, &u8g_com_null_fn}; +#if ENABLED(LIGHTWEIGHT_UI) + // We have to include the code for the lightweight UI here + // as it relies on macros that are only defined in this file. + #include "status_screen_lite_ST7920_spi.h" +#endif + #pragma GCC reset_options #endif // U8G_HAL_LINKS diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index 5bf308d3c..d72e69919 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -5141,20 +5141,34 @@ void lcd_update() { #endif #if ENABLED(DOGLCD) - if (!drawing_screen) { // If not already drawing pages - u8g.firstPage(); // Start the first page - drawing_screen = 1; // Flag as drawing pages - } - lcd_setFont(FONT_MENU); // Setup font for every page draw - u8g.setColorIndex(1); // And reset the color - CURRENTSCREEN(); // Draw and process the current screen - - // The screen handler can clear drawing_screen for an action that changes the screen. - // If still drawing and there's another page, update max-time and return now. - // The nextPage will already be set up on the next call. - if (drawing_screen && (drawing_screen = u8g.nextPage())) { - NOLESS(max_display_update_time, millis() - ms); - return; + #if ENABLED(LIGHTWEIGHT_UI) + #if ENABLED(ULTIPANEL) + const bool in_status = currentScreen == lcd_status_screen; + #else + constexpr bool in_status = true; + #endif + const bool do_u8g_loop = !in_status; + lcd_in_status(in_status); + if (in_status) lcd_status_screen(); + #else + constexpr bool do_u8g_loop = true; + #endif + if (do_u8g_loop) { + if (!drawing_screen) { // If not already drawing pages + u8g.firstPage(); // Start the first page + drawing_screen = 1; // Flag as drawing pages + } + lcd_setFont(FONT_MENU); // Setup font for every page draw + u8g.setColorIndex(1); // And reset the color + CURRENTSCREEN(); // Draw and process the current screen + + // The screen handler can clear drawing_screen for an action that changes the screen. + // If still drawing and there's another page, update max-time and return now. + // The nextPage will already be set up on the next call. + if (drawing_screen && (drawing_screen = u8g.nextPage())) { + NOLESS(max_display_update_time, millis() - ms); + return; + } } #else CURRENTSCREEN(); diff --git a/Marlin/src/lcd/ultralcd_impl_DOGM.h b/Marlin/src/lcd/ultralcd_impl_DOGM.h index a03bd4873..24565a832 100644 --- a/Marlin/src/lcd/ultralcd_impl_DOGM.h +++ b/Marlin/src/lcd/ultralcd_impl_DOGM.h @@ -353,6 +353,12 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { #endif // SHOW_BOOTSCREEN +#if ENABLED(LIGHTWEIGHT_UI) + #include "dogm/status_screen_lite_ST7920.h" +#else + #include "dogm/status_screen_DOGM.h" +#endif + // Initialize or re-initialize the LCD static void lcd_implementation_init() { @@ -383,6 +389,9 @@ static void lcd_implementation_init() { // The kill screen is displayed for unrecoverable conditions void lcd_kill_screen() { + #if ENABLED(LIGHTWEIGHT_UI) + ST7920_Lite_Status_Screen::clear_text_buffer(); + #endif const uint8_t h4 = u8g.getHeight() / 4; u8g.firstPage(); do { @@ -398,420 +407,6 @@ void lcd_kill_screen() { void lcd_implementation_clear() { } // Automatically cleared by Picture Loop -// -// Status Screen -// - -FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t x, const uint8_t y) { - const char * const str = itostr3(temp); - u8g.setPrintPos(x - (str[0] != ' ' ? 0 : str[1] != ' ' ? 1 : 2) * DOG_CHAR_WIDTH / 2, y); - lcd_print(str); - lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); -} - -#ifndef HEAT_INDICATOR_X - #define HEAT_INDICATOR_X 8 -#endif - -FORCE_INLINE void _draw_heater_status(const uint8_t x, const int8_t heater, const bool blink) { - #if !HEATER_IDLE_HANDLER - UNUSED(blink); - #endif - - #if HAS_TEMP_BED - const bool isBed = heater < 0; - #else - constexpr bool isBed = false; - #endif - - if (PAGE_UNDER(7)) { - #if HEATER_IDLE_HANDLER - const bool is_idle = (!isBed ? thermalManager.is_heater_idle(heater) : - #if HAS_TEMP_BED - thermalManager.is_bed_idle() - #else - false - #endif - ); - - if (blink || !is_idle) - #endif - _draw_centered_temp((isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater)) + 0.5, x, 7); } - - if (PAGE_CONTAINS(21, 28)) - _draw_centered_temp((isBed ? thermalManager.degBed() : thermalManager.degHotend(heater)) + 0.5, x, 28); - - if (PAGE_CONTAINS(17, 20)) { - const uint8_t h = isBed ? 7 : HEAT_INDICATOR_X, - y = isBed ? 18 : 17; - if (isBed ? thermalManager.isHeatingBed() : thermalManager.isHeatingHotend(heater)) { - u8g.setColorIndex(0); // white on black - u8g.drawBox(x + h, y, 2, 2); - u8g.setColorIndex(1); // black on white - } - else { - u8g.drawBox(x + h, y, 2, 2); - } - } -} - -FORCE_INLINE void _draw_axis_label(const AxisEnum axis, const char* const pstr, const bool blink) { - if (blink) - lcd_printPGM(pstr); - else { - if (!axis_homed[axis]) - u8g.print('?'); - else { - #if DISABLED(HOME_AFTER_DEACTIVATE) && DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) - if (!axis_known_position[axis]) - u8g.print(' '); - else - #endif - lcd_printPGM(pstr); - } - } -} - -inline void lcd_implementation_status_message(const bool blink) { - #if ENABLED(STATUS_MESSAGE_SCROLLING) - static bool last_blink = false; - const uint8_t slen = lcd_strlen(lcd_status_message); - const char *stat = lcd_status_message + status_scroll_pos; - if (slen <= LCD_WIDTH) - lcd_print_utf(stat); // The string isn't scrolling - else { - if (status_scroll_pos <= slen - LCD_WIDTH) - lcd_print_utf(stat); // The string fills the screen - else { - uint8_t chars = LCD_WIDTH; - if (status_scroll_pos < slen) { // First string still visible - lcd_print_utf(stat); // The string leaves space - chars -= slen - status_scroll_pos; // Amount of space left - } - u8g.print('.'); // Always at 1+ spaces left, draw a dot - if (--chars) { - if (status_scroll_pos < slen + 1) // Draw a second dot if there's space - --chars, u8g.print('.'); - if (chars) lcd_print_utf(lcd_status_message, chars); // Print a second copy of the message - } - } - if (last_blink != blink) { - last_blink = blink; - // Skip any non-printing bytes - if (status_scroll_pos < slen) while (!PRINTABLE(lcd_status_message[status_scroll_pos])) status_scroll_pos++; - if (++status_scroll_pos >= slen + 2) status_scroll_pos = 0; - } - } - #else - UNUSED(blink); - lcd_print_utf(lcd_status_message); - #endif -} - -static void lcd_implementation_status_screen() { - - const bool blink = lcd_blink(); - - #if FAN_ANIM_FRAMES > 2 - static bool old_blink; - static uint8_t fan_frame; - if (old_blink != blink) { - old_blink = blink; - if (!fanSpeeds[0] || ++fan_frame >= FAN_ANIM_FRAMES) fan_frame = 0; - } - #endif - - // Status Menu Font - lcd_setFont(FONT_STATUSMENU); - - // - // Fan Animation - // - // Draws the whole heading image as a B/W bitmap rather than - // drawing the elements separately. - // This was done as an optimization, as it was slower to draw - // multiple parts compared to a single bitmap. - // - // The bitmap: - // - May be offset in X - // - Includes all nozzle(s), bed(s), and the fan. - // - // TODO: - // - // - Only draw the whole header on the first - // entry to the status screen. Nozzle, bed, and - // fan outline bits don't change. - // - if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) { - - u8g.drawBitmapP( - STATUS_SCREEN_X, STATUS_SCREEN_Y, - (STATUS_SCREENWIDTH + 7) / 8, STATUS_SCREENHEIGHT, - #if HAS_FAN0 - #if FAN_ANIM_FRAMES > 2 - fan_frame == 1 ? status_screen1_bmp : - fan_frame == 2 ? status_screen2_bmp : - #if FAN_ANIM_FRAMES > 3 - fan_frame == 3 ? status_screen3_bmp : - #endif - #else - blink && fanSpeeds[0] ? status_screen1_bmp : - #endif - #endif - status_screen0_bmp - ); - - } - - // - // Temperature Graphics and Info - // - - if (PAGE_UNDER(28)) { - // Extruders - HOTEND_LOOP() _draw_heater_status(STATUS_SCREEN_HOTEND_TEXT_X(e), e, blink); - - // Heated bed - #if HOTENDS < 4 && HAS_TEMP_BED - _draw_heater_status(STATUS_SCREEN_BED_TEXT_X, -1, blink); - #endif - - #if HAS_FAN0 - if (PAGE_CONTAINS(20, 27)) { - // Fan - const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256; - if (per) { - u8g.setPrintPos(STATUS_SCREEN_FAN_TEXT_X, STATUS_SCREEN_FAN_TEXT_Y); - lcd_print(itostr3(per)); - u8g.print('%'); - } - } - #endif - } - - #if ENABLED(SDSUPPORT) - // - // SD Card Symbol - // - if (card.isFileOpen() && PAGE_CONTAINS(42 - (TALL_FONT_CORRECTION), 51 - (TALL_FONT_CORRECTION))) { - // Upper box - u8g.drawBox(42, 42 - (TALL_FONT_CORRECTION), 8, 7); // 42-48 (or 41-47) - // Right edge - u8g.drawBox(50, 44 - (TALL_FONT_CORRECTION), 2, 5); // 44-48 (or 43-47) - // Bottom hollow box - u8g.drawFrame(42, 49 - (TALL_FONT_CORRECTION), 10, 4); // 49-52 (or 48-51) - // Corner pixel - u8g.drawPixel(50, 43 - (TALL_FONT_CORRECTION)); // 43 (or 42) - } - #endif // SDSUPPORT - - #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) - // - // Progress bar frame - // - #define PROGRESS_BAR_X 54 - #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X) - - if (PAGE_CONTAINS(49, 52 - (TALL_FONT_CORRECTION))) // 49-52 (or 49-51) - u8g.drawFrame( - PROGRESS_BAR_X, 49, - PROGRESS_BAR_WIDTH, 4 - (TALL_FONT_CORRECTION) - ); - - #if DISABLED(LCD_SET_PROGRESS_MANUALLY) - const uint8_t progress_bar_percent = card.percentDone(); - #endif - - if (progress_bar_percent > 1) { - - // - // Progress bar solid part - // - - if (PAGE_CONTAINS(50, 51 - (TALL_FONT_CORRECTION))) // 50-51 (or just 50) - u8g.drawBox( - PROGRESS_BAR_X + 1, 50, - (uint16_t)((PROGRESS_BAR_WIDTH - 2) * progress_bar_percent * 0.01), 2 - (TALL_FONT_CORRECTION) - ); - - // - // SD Percent Complete - // - - #if ENABLED(DOGM_SD_PERCENT) - if (PAGE_CONTAINS(41, 48)) { - // Percent complete - u8g.setPrintPos(55, 48); - u8g.print(itostr3(progress_bar_percent)); - u8g.print('%'); - } - #endif - } - - // - // Elapsed Time - // - - #if DISABLED(DOGM_SD_PERCENT) - #define SD_DURATION_X (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH / 2) - len * (DOG_CHAR_WIDTH / 2)) - #else - #define SD_DURATION_X (LCD_PIXEL_WIDTH - len * DOG_CHAR_WIDTH) - #endif - - if (PAGE_CONTAINS(41, 48)) { - char buffer[10]; - duration_t elapsed = print_job_timer.duration(); - bool has_days = (elapsed.value >= 60*60*24L); - uint8_t len = elapsed.toDigital(buffer, has_days); - u8g.setPrintPos(SD_DURATION_X, 48); - lcd_print(buffer); - } - - #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY - - // - // XYZ Coordinates - // - - #if ENABLED(USE_SMALL_INFOFONT) - #define INFO_FONT_HEIGHT 7 - #else - #define INFO_FONT_HEIGHT 8 - #endif - - #define XYZ_BASELINE (30 + INFO_FONT_HEIGHT) - - #define X_LABEL_POS 3 - #define X_VALUE_POS 11 - #define XYZ_SPACING 40 - - #if ENABLED(XYZ_HOLLOW_FRAME) - #define XYZ_FRAME_TOP 29 - #define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 3 - #else - #define XYZ_FRAME_TOP 30 - #define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 1 - #endif - - // Before homing the axis letters are blinking 'X' <-> '?'. - // When axis is homed but axis_known_position is false the axis letters are blinking 'X' <-> ' '. - // When everything is ok you see a constant 'X'. - - static char xstring[5], ystring[5], zstring[7]; - #if ENABLED(FILAMENT_LCD_DISPLAY) - static char wstring[5], mstring[4]; - #endif - - // At the first page, regenerate the XYZ strings - if (page.page == 0) { - strcpy(xstring, ftostr4sign(LOGICAL_X_POSITION(current_position[X_AXIS]))); - strcpy(ystring, ftostr4sign(LOGICAL_Y_POSITION(current_position[Y_AXIS]))); - strcpy(zstring, ftostr52sp(FIXFLOAT(LOGICAL_Z_POSITION(current_position[Z_AXIS])))); - #if ENABLED(FILAMENT_LCD_DISPLAY) - strcpy(wstring, ftostr12ns(filament_width_meas)); - strcpy(mstring, itostr3(100.0 * ( - parser.volumetric_enabled - ? planner.volumetric_area_nominal / planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] - : planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] - ) - )); - #endif - } - - if (PAGE_CONTAINS(XYZ_FRAME_TOP, XYZ_FRAME_TOP + XYZ_FRAME_HEIGHT - 1)) { - - #if ENABLED(XYZ_HOLLOW_FRAME) - u8g.drawFrame(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 29-40 7: 29-39 - #else - u8g.drawBox(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 30-39 7: 30-37 - #endif - - if (PAGE_CONTAINS(XYZ_BASELINE - (INFO_FONT_HEIGHT - 1), XYZ_BASELINE)) { - - #if DISABLED(XYZ_HOLLOW_FRAME) - u8g.setColorIndex(0); // white on black - #endif - - u8g.setPrintPos(0 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); - _draw_axis_label(X_AXIS, PSTR(MSG_X), blink); - u8g.setPrintPos(0 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); - lcd_print(xstring); - - u8g.setPrintPos(1 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); - _draw_axis_label(Y_AXIS, PSTR(MSG_Y), blink); - u8g.setPrintPos(1 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); - lcd_print(ystring); - - u8g.setPrintPos(2 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); - _draw_axis_label(Z_AXIS, PSTR(MSG_Z), blink); - u8g.setPrintPos(2 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); - lcd_print(zstring); - - #if DISABLED(XYZ_HOLLOW_FRAME) - u8g.setColorIndex(1); // black on white - #endif - } - } - - // - // Feedrate - // - - if (PAGE_CONTAINS(51 - INFO_FONT_HEIGHT, 49)) { - lcd_setFont(FONT_MENU); - u8g.setPrintPos(3, 50); - lcd_print(LCD_STR_FEEDRATE[0]); - - lcd_setFont(FONT_STATUSMENU); - u8g.setPrintPos(12, 50); - lcd_print(itostr3(feedrate_percentage)); - u8g.print('%'); - - // - // Filament sensor display if SD is disabled - // - #if ENABLED(FILAMENT_LCD_DISPLAY) && DISABLED(SDSUPPORT) - u8g.setPrintPos(56, 50); - lcd_print(wstring); - u8g.setPrintPos(102, 50); - lcd_print(mstring); - u8g.print('%'); - lcd_setFont(FONT_MENU); - u8g.setPrintPos(47, 50); - lcd_print(LCD_STR_FILAM_DIA); - u8g.setPrintPos(93, 50); - lcd_print(LCD_STR_FILAM_MUL); - #endif - } - - // - // Status line - // - - #define STATUS_BASELINE (55 + INFO_FONT_HEIGHT) - - if (PAGE_CONTAINS(STATUS_BASELINE - (INFO_FONT_HEIGHT - 1), STATUS_BASELINE)) { - u8g.setPrintPos(0, STATUS_BASELINE); - - #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) - if (PENDING(millis(), previous_lcd_status_ms + 5000UL)) { //Display both Status message line and Filament display on the last line - lcd_implementation_status_message(blink); - } - else { - lcd_printPGM(PSTR(LCD_STR_FILAM_DIA)); - u8g.print(':'); - lcd_print(wstring); - lcd_printPGM(PSTR(" " LCD_STR_FILAM_MUL)); - u8g.print(':'); - lcd_print(mstring); - u8g.print('%'); - } - #else - lcd_implementation_status_message(blink); - #endif - } -} - #if ENABLED(ULTIPANEL) uint8_t row_y1, row_y2; From 556abc08886b1c2cd6fad94498dbc901bd008250 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 21 Feb 2018 23:50:01 -0600 Subject: [PATCH 32/32] Add LIGHTWEIGHT_UI to example configs --- .../AlephObjects/TAZ4/Configuration_adv.h | 16 ++++++++++++++++ .../src/config/examples/Anet/A6/Configuration.h | 2 -- .../config/examples/Anet/A6/Configuration_adv.h | 16 ++++++++++++++++ .../src/config/examples/Anet/A8/Configuration.h | 2 -- .../config/examples/Anet/A8/Configuration_adv.h | 16 ++++++++++++++++ .../examples/Azteeg/X5GT/Configuration_adv.h | 16 ++++++++++++++++ .../examples/BIBO/TouchX/Configuration_adv.h | 16 ++++++++++++++++ .../examples/BQ/Hephestos/Configuration_adv.h | 16 ++++++++++++++++ .../examples/BQ/Hephestos_2/Configuration_adv.h | 16 ++++++++++++++++ .../examples/BQ/WITBOX/Configuration_adv.h | 16 ++++++++++++++++ .../config/examples/Cartesio/Configuration_adv.h | 16 ++++++++++++++++ .../examples/Creality/CR-10/Configuration_adv.h | 16 ++++++++++++++++ .../examples/Creality/CR-10S/Configuration_adv.h | 16 ++++++++++++++++ .../examples/Creality/Ender/Configuration_adv.h | 16 ++++++++++++++++ .../config/examples/Felix/Configuration_adv.h | 16 ++++++++++++++++ .../FolgerTech/i3-2020/Configuration_adv.h | 16 ++++++++++++++++ .../Infitary/i3-M508/Configuration_adv.h | 16 ++++++++++++++++ .../examples/JGAurora/A5/Configuration_adv.h | 16 ++++++++++++++++ .../examples/MakerParts/Configuration_adv.h | 16 ++++++++++++++++ .../examples/Malyan/M150/Configuration_adv.h | 16 ++++++++++++++++ .../examples/Malyan/M200/Configuration_adv.h | 16 ++++++++++++++++ .../Micromake/C1/enhanced/Configuration_adv.h | 16 ++++++++++++++++ .../examples/Mks/Sbase/Configuration_adv.h | 16 ++++++++++++++++ .../config/examples/RigidBot/Configuration_adv.h | 16 ++++++++++++++++ .../config/examples/SCARA/Configuration_adv.h | 16 ++++++++++++++++ .../examples/Sanguinololu/Configuration_adv.h | 16 ++++++++++++++++ .../config/examples/TheBorg/Configuration_adv.h | 16 ++++++++++++++++ .../config/examples/TinyBoy2/Configuration_adv.h | 16 ++++++++++++++++ .../UltiMachine/Archim2/Configuration_adv.h | 16 ++++++++++++++++ .../examples/Velleman/K8200/Configuration_adv.h | 16 ++++++++++++++++ .../examples/Velleman/K8400/Configuration_adv.h | 16 ++++++++++++++++ .../Wanhao/Duplicator 6/Configuration_adv.h | 16 ++++++++++++++++ .../FLSUN/auto_calibrate/Configuration_adv.h | 16 ++++++++++++++++ .../delta/FLSUN/kossel/Configuration_adv.h | 16 ++++++++++++++++ .../delta/FLSUN/kossel_mini/Configuration_adv.h | 16 ++++++++++++++++ .../examples/delta/generic/Configuration_adv.h | 16 ++++++++++++++++ .../delta/kossel_mini/Configuration_adv.h | 16 ++++++++++++++++ .../delta/kossel_pro/Configuration_adv.h | 16 ++++++++++++++++ .../examples/delta/kossel_xl/Configuration_adv.h | 16 ++++++++++++++++ .../gCreate/gMax1.5+/Configuration_adv.h | 16 ++++++++++++++++ .../config/examples/makibox/Configuration_adv.h | 16 ++++++++++++++++ .../examples/tvrrug/Round2/Configuration_adv.h | 16 ++++++++++++++++ .../config/examples/wt150/Configuration_adv.h | 16 ++++++++++++++++ 43 files changed, 656 insertions(+), 4 deletions(-) diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 125bd9141..cea866311 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index e5875112d..4ac60c6e3 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -1675,8 +1675,6 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h -// //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index 20c4cc06a..e5970eeb3 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index b5b779f2a..6afc9374d 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -1534,8 +1534,6 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h -// //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index d23d26073..a2597b3cd 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h index dcd33b768..c5eeafaad 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -657,6 +657,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h index 50ef23cc3..6377d2e4d 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index 8f5bc3f12..0051f608c 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index 3be8f8dcd..06f33d4c7 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index 8f5bc3f12..0051f608c 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index 60220f1db..8d86f0235 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 282ce0cc9..8d5cf3f80 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index 25441b009..d4a2e5f97 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h index 6727bf256..6ed16d050 100644 --- a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index 51a76484a..29efba3dc 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index f6f5270fe..7d1b2726a 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index ffe39b02a..644d356e6 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index 81a98c8eb..f0fb352ad 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index 315347e1a..628e94e29 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index 6f9f527a2..f9f50061e 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index eeb56edfe..189b4daf3 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 4b562b787..241914681 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index 198f4fcd6..909584283 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -664,6 +664,22 @@ #define DOGLCD_MOSI MOSI_PIN #endif + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index 2cd9e5448..138266a96 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index be551646e..fe21220d1 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index f0bded8d7..26f64f458 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index 5114bb82f..5cb450a58 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -653,6 +653,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index cd72fd0eb..057f4438a 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index 5d0b1697d..bb0a61716 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index 99d956b3c..fd6b4e344 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -669,6 +669,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index 5ea9cd203..d22b7547b 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 892d2f985..2ff90dc52 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -658,6 +658,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 3370fb4f0..442978a49 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -658,6 +658,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 7379b0eb5..ea12964b7 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -658,6 +658,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index f15d97279..85d281b06 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -658,6 +658,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index f15d97279..85d281b06 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -658,6 +658,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index f15d97279..85d281b06 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -658,6 +658,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h index 1d6de6966..2e1c120b2 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h @@ -663,6 +663,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 8b5b3a99e..311d1de36 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -658,6 +658,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 122bc6b0e..96a6abab6 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index bd489d539..205be2528 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index dd3e88e40..c8c302689 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -656,6 +656,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index 704db84b5..720177f83 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -657,6 +657,22 @@ // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + #endif // DOGLCD // @section safety