diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 288daffcb..d7e8f1ffd 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -711,7 +711,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic // --------------------- // 2 wire Non-latching LCD SR from: // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection - +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD //#define SAV_3DLCD // @section extras diff --git a/Marlin/language_ru.h b/Marlin/language_ru.h index 62cc57e39..0cb4a81b0 100644 --- a/Marlin/language_ru.h +++ b/Marlin/language_ru.h @@ -25,37 +25,37 @@ #define MSG_PREHEAT_PLA "Преднагрев PLA" #define MSG_PREHEAT_PLA_N "Преднагрев PLA" #define MSG_PREHEAT_PLA_ALL "Преднаг. PLA все" -#define MSG_PREHEAT_PLA_BEDONLY "Пред. PLA Кровать" +#define MSG_PREHEAT_PLA_BEDONLY "Пред. PLA Стол" #define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA" #define MSG_PREHEAT_ABS "Преднагрев ABS" #define MSG_PREHEAT_ABS_N "Преднагрев ABS" #define MSG_PREHEAT_ABS_ALL "Преднаг. ABS все " -#define MSG_PREHEAT_ABS_BEDONLY "Пред. ABS Кровать" +#define MSG_PREHEAT_ABS_BEDONLY "Пред. ABS Стол" #define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS" #define MSG_COOLDOWN "Охлаждение" -#define MSG_SWITCH_PS_ON "Switch Power On" -#define MSG_SWITCH_PS_OFF "Switch Power Off" +#define MSG_SWITCH_PS_ON "Включить Питание" +#define MSG_SWITCH_PS_OFF "Выключить Питание" #define MSG_EXTRUDE "Экструзия" -#define MSG_RETRACT "Откат" +#define MSG_RETRACT "Втягивание" #define MSG_MOVE_AXIS "Движение по осям" -#define MSG_MOVE_X "Move X" -#define MSG_MOVE_Y "Move Y" -#define MSG_MOVE_Z "Move Z" -#define MSG_MOVE_E "Extruder" -#define MSG_MOVE_01MM "Move 0.1mm" -#define MSG_MOVE_1MM "Move 1mm" -#define MSG_MOVE_10MM "Move 10mm" -#define MSG_LEVEL_BED "Настр. уровня кровати" +#define MSG_MOVE_X "Движение по X" +#define MSG_MOVE_Y "Движение по Y" +#define MSG_MOVE_Z "Движение по Z" +#define MSG_MOVE_E "Экструдер" +#define MSG_MOVE_01MM "Движение по 0.1mm" +#define MSG_MOVE_1MM "Движение по 1mm" +#define MSG_MOVE_10MM "Движение по 10mm" +#define MSG_LEVEL_BED "Настр. уровня стола" #define MSG_SPEED "Скорость" #define MSG_NOZZLE LCD_STR_THERMOMETER " Фильера" -#define MSG_BED LCD_STR_THERMOMETER " Кровать" +#define MSG_BED LCD_STR_THERMOMETER " Стол" #define MSG_FAN_SPEED "Куллер" #define MSG_FLOW "Поток" #define MSG_CONTROL "Настройки" #define MSG_MIN LCD_STR_THERMOMETER " Минимум" #define MSG_MAX LCD_STR_THERMOMETER " Максимум" #define MSG_FACTOR LCD_STR_THERMOMETER " Фактор" -#define MSG_AUTOTEMP "Autotemp" +#define MSG_AUTOTEMP "Автотемпература" #define MSG_ON "Вкл. " #define MSG_OFF "Выкл. " #define MSG_PID_P "PID-P" @@ -73,20 +73,20 @@ #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" -#define MSG_AMAX "Amax " -#define MSG_A_RETRACT "A-retract" +#define MSG_AMAX "Amax" +#define MSG_A_RETRACT "A-втягивание" #define MSG_XSTEPS "X шаг/mm" #define MSG_YSTEPS "Y шаг/mm" #define MSG_ZSTEPS "Z шаг/mm" #define MSG_ESTEPS "E шаг/mm" #define MSG_TEMPERATURE "Температура" #define MSG_MOTION "Скорости" -#define MSG_VOLUMETRIC "Filament" -#define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" -#define MSG_CONTRAST "LCD contrast" +#define MSG_VOLUMETRIC "Филамент" +#define MSG_VOLUMETRIC_ENABLED "E в mm3" +#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Диаметр фил-та 1" +#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Диаметр фил-та 2" +#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Диаметр фил-та 3" +#define MSG_CONTRAST "Контраст LCD" #define MSG_STORE_EPROM "Сохранить в EPROM" #define MSG_LOAD_EPROM "Загруз. из EPROM" #define MSG_RESTORE_FAILSAFE "Сброс настроек" @@ -101,31 +101,31 @@ #define MSG_NO_CARD "Нет карты" #define MSG_DWELL "Сон..." #define MSG_USERWAIT "Ожиданиие" -#define MSG_RESUMING "Resuming print" -#define MSG_PRINT_ABORTED "Print aborted" +#define MSG_RESUMING "Возобновление..." +#define MSG_PRINT_ABORTED "Отмена печати" #define MSG_NO_MOVE "Нет движения." #define MSG_KILLED "УБИТО." #define MSG_STOPPED "ОСТАНОВЛЕНО." -#define MSG_CONTROL_RETRACT "Откат mm" -#define MSG_CONTROL_RETRACT_SWAP "своп Откат mm" -#define MSG_CONTROL_RETRACTF "Откат V" +#define MSG_CONTROL_RETRACT "Втягивание mm" +#define MSG_CONTROL_RETRACT_SWAP "Своп Втягивание mm" +#define MSG_CONTROL_RETRACTF "Втягивание V" #define MSG_CONTROL_RETRACT_ZLIFT "Прыжок mm" #define MSG_CONTROL_RETRACT_RECOVER "Возврат +mm" -#define MSG_CONTROL_RETRACT_RECOVER_SWAP "своп Возврат +mm" +#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Своп Возврат +mm" #define MSG_CONTROL_RETRACT_RECOVERF "Возврат V" #define MSG_AUTORETRACT "АвтоОткат" -#define MSG_FILAMENTCHANGE "Change filament" -#define MSG_INIT_SDCARD "Init. SD-Card" -#define MSG_CNG_SDCARD "Change SD-Card" -#define MSG_ZPROBE_OUT "Z probe out. bed" +#define MSG_FILAMENTCHANGE "Смена филамента" +#define MSG_INIT_SDCARD "Инициализация SD-Card" +#define MSG_CNG_SDCARD "Смана SD-Card" +#define MSG_ZPROBE_OUT "Z датчик вне стола" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Endstop abort" -#define MSG_END_HOUR "hours" -#define MSG_END_MINUTE "minutes" +#define MSG_END_HOUR "часов" +#define MSG_END_MINUTE "минут" #ifdef DELTA_CALIBRATION_MENU #define MSG_DELTA_CALIBRATE "Delta Calibration"