diff --git a/.circleci/config.yml b/.circleci/config.yml index 7d278d127..4706bb505 100644 --- a/.circleci/config.yml +++ b/.circleci/config.yml @@ -242,12 +242,12 @@ jobs: echo testing STM32F1 targets... export TEST_PLATFORM="-e STM32F1" restore_configs - echo use_example_configs STM32F10 - use_example_configs STM32F10 + echo use_example_configs STM32/STM32F10 + use_example_configs STM32/STM32F10 build_marlin_pio ./ ${TEST_PLATFORM} restore_configs - echo use_example_configs stm32f103ret6 - use_example_configs stm32f103ret6 + echo use_example_configs STM32/stm32f103ret6 + use_example_configs STM32/stm32f103ret6 build_marlin_pio ./ ${TEST_PLATFORM} restore_configs diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 2744d43b1..7a1111fde 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 23ce49121..b009eb612 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/Marlin/Makefile b/Marlin/Makefile index e5b0e3800..d6e060293 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -281,42 +281,44 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1205) else ifeq ($(HARDWARE_MOTHERBOARD),1300) # Cartesio CN Controls V12 else ifeq ($(HARDWARE_MOTHERBOARD),1301) -# Cheaptronic v1.0 +# Cartesio CN Controls V15 else ifeq ($(HARDWARE_MOTHERBOARD),1302) -# Cheaptronic v2.0 +# Cheaptronic v1.0 else ifeq ($(HARDWARE_MOTHERBOARD),1303) -# Makerbot Mightyboard Revision E +# Cheaptronic v2.0 else ifeq ($(HARDWARE_MOTHERBOARD),1304) -# Megatronics +# Makerbot Mightyboard Revision E else ifeq ($(HARDWARE_MOTHERBOARD),1305) -# Megatronics v2.0 +# Megatronics else ifeq ($(HARDWARE_MOTHERBOARD),1306) -# Megatronics v3.0 +# Megatronics v2.0 else ifeq ($(HARDWARE_MOTHERBOARD),1307) -# Megatronics v3.1 +# Megatronics v3.0 else ifeq ($(HARDWARE_MOTHERBOARD),1308) -# Megatronics v3.2 +# Megatronics v3.1 else ifeq ($(HARDWARE_MOTHERBOARD),1309) -# Elefu Ra Board (v3) +# Megatronics v3.2 else ifeq ($(HARDWARE_MOTHERBOARD),1310) -# Leapfrog +# Elefu Ra Board (v3) else ifeq ($(HARDWARE_MOTHERBOARD),1311) -# Mega controller +# Leapfrog else ifeq ($(HARDWARE_MOTHERBOARD),1312) -# Geeetech GT2560 Rev B for Mecreator2 +# Mega controller else ifeq ($(HARDWARE_MOTHERBOARD),1313) -# Geeetech GT2560 Rev. A +# Geeetech GT2560 Rev B for Mecreator2 else ifeq ($(HARDWARE_MOTHERBOARD),1314) -# Geeetech GT2560 Rev. A+ (with auto level probe) +# Geeetech GT2560 Rev. A else ifeq ($(HARDWARE_MOTHERBOARD),1315) -# Geeetech GT2560 Rev B for A10(M/D) +# Geeetech GT2560 Rev. A+ (with auto level probe) else ifeq ($(HARDWARE_MOTHERBOARD),1316) -# Geeetech GT2560 Rev B for A20(M/D) +# Geeetech GT2560 Rev B for A10(M/D) else ifeq ($(HARDWARE_MOTHERBOARD),1317) -# Einstart retrofit +# Geeetech GT2560 Rev B for A20(M/D) else ifeq ($(HARDWARE_MOTHERBOARD),1318) -# Wanhao 0ne+ i3 Mini +# Einstart retrofit else ifeq ($(HARDWARE_MOTHERBOARD),1319) +# Wanhao 0ne+ i3 Mini +else ifeq ($(HARDWARE_MOTHERBOARD),1320) # # ATmega1281, ATmega2561 diff --git a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h index f1cdbba29..b83247415 100644 --- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h +++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h @@ -23,6 +23,7 @@ #include "../../../inc/MarlinConfigPre.h" #include "../../shared/Marduino.h" +#include void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index); void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level); diff --git a/Marlin/src/HAL/HAL_DUE/fastio_Due.h b/Marlin/src/HAL/HAL_DUE/fastio_Due.h index 2bcd604ae..a97a944e3 100644 --- a/Marlin/src/HAL/HAL_DUE/fastio_Due.h +++ b/Marlin/src/HAL/HAL_DUE/fastio_Due.h @@ -70,7 +70,7 @@ const uint32_t mask = MASK(DIO ## IO ## _PIN); \ if (V) port->PIO_SODR = mask; \ else port->PIO_CODR = mask; \ -} while(0) +}while(0) // Toggle a pin #define _TOGGLE(IO) _WRITE(IO, !READ(IO)) diff --git a/Marlin/src/HAL/HAL_DUE/usb/compiler.h b/Marlin/src/HAL/HAL_DUE/usb/compiler.h index d9ecd3f0f..cecdd256f 100644 --- a/Marlin/src/HAL/HAL_DUE/usb/compiler.h +++ b/Marlin/src/HAL/HAL_DUE/usb/compiler.h @@ -112,7 +112,7 @@ * \def unused * \brief Marking \a v as a unused parameter or value. */ -#define unused(v) do { (void)(v); } while(0) +#define unused(v) do { (void)(v); }while(0) /** * \def barrier @@ -169,7 +169,7 @@ * heuristics and inline the function no matter how big it thinks it * becomes. */ -#if defined(__CC_ARM) +#ifdef __CC_ARM # define __always_inline __forceinline #elif (defined __GNUC__) #ifdef __always_inline @@ -187,7 +187,7 @@ * This annotation instructs the compiler to ignore its inlining * heuristics and not inline the function. */ -#if defined(__CC_ARM) +#ifdef __CC_ARM # define __no_inline __attribute__((noinline)) #elif (defined __GNUC__) # define __no_inline __attribute__((__noinline__)) @@ -204,7 +204,7 @@ * * \param expr Expression to evaluate and supposed to be nonzero. */ -#if defined(_ASSERT_ENABLE_) +#ifdef _ASSERT_ENABLE_ # if defined(TEST_SUITE_DEFINE_ASSERT_MACRO) // Assert() is defined in unit_test/suite.h # include "unit_test/suite.h" @@ -998,14 +998,14 @@ typedef U8 Byte; //!< 8-bit unsigned integer. #endif // #ifndef __ASSEMBLY__ -#if defined(__ICCARM__) +#ifdef __ICCARM__ #define SHORTENUM __packed #elif defined(__GNUC__) #define SHORTENUM __attribute__((packed)) #endif /* No operation */ -#if defined(__ICCARM__) +#ifdef __ICCARM__ #define nop() __no_operation() #elif defined(__GNUC__) #define nop() (__NOP()) diff --git a/Marlin/src/HAL/HAL_LINUX/include/serial.h b/Marlin/src/HAL/HAL_LINUX/include/serial.h index e21227640..a844936c1 100644 --- a/Marlin/src/HAL/HAL_LINUX/include/serial.h +++ b/Marlin/src/HAL/HAL_LINUX/include/serial.h @@ -142,10 +142,10 @@ public: void print_bin(uint32_t value, uint8_t num_digits) { uint32_t mask = 1 << (num_digits -1); for (uint8_t i = 0; i < num_digits; i++) { - if (!(i % 4) && i) write(' '); - if (!(i % 16) && i) write(' '); - if (value & mask) write('1'); - else write('0'); + if (!(i % 4) && i) write(' '); + if (!(i % 16) && i) write(' '); + if (value & mask) write('1'); + else write('0'); value <<= 1; } } diff --git a/Marlin/src/HAL/HAL_LPC1768/usb_serial.cpp b/Marlin/src/HAL/HAL_LPC1768/usb_serial.cpp index d143bae70..c83931745 100644 --- a/Marlin/src/HAL/HAL_LPC1768/usb_serial.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/usb_serial.cpp @@ -1,13 +1,37 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + #ifdef TARGET_LPC1768 + #include "../../inc/MarlinConfigPre.h" #if ENABLED(EMERGENCY_PARSER) - #include "../../feature/emergency_parser.h" - EmergencyParser::State emergency_state; - bool CDC_RecvCallback(const char buffer) { - emergency_parser.update(emergency_state, buffer); - return true; - } -#endif // ENABLED(EMERGENCY_PARSER) +#include "../../feature/emergency_parser.h" +EmergencyParser::State emergency_state; +bool CDC_RecvCallback(const char buffer) { + emergency_parser.update(emergency_state, buffer); + return true; +} + +#endif // EMERGENCY_PARSER #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/HAL_SAMD51/Servo_SAMD51.cpp b/Marlin/src/HAL/HAL_SAMD51/Servo_SAMD51.cpp index 16ba8369e..c4fd2d57b 100644 --- a/Marlin/src/HAL/HAL_SAMD51/Servo_SAMD51.cpp +++ b/Marlin/src/HAL/HAL_SAMD51/Servo_SAMD51.cpp @@ -115,12 +115,12 @@ HAL_SERVO_TIMER_ISR() { tc->COUNT16.CC[tcChannel].reg = (uint16_t)(tcCounterValue - 4UL); // at least REFRESH_INTERVAL has elapsed } if (tcChannel == 0) { - SYNC(tc->COUNT16.SYNCBUSY.bit.CC0); + SYNC(tc->COUNT16.SYNCBUSY.bit.CC0); // Clear the interrupt tc->COUNT16.INTFLAG.reg = TC_INTFLAG_MC0; } else { - SYNC(tc->COUNT16.SYNCBUSY.bit.CC1); + SYNC(tc->COUNT16.SYNCBUSY.bit.CC1); // Clear the interrupt tc->COUNT16.INTFLAG.reg = TC_INTFLAG_MC1; } diff --git a/Marlin/src/HAL/HAL_SAMD51/fastio_SAMD51.h b/Marlin/src/HAL/HAL_SAMD51/fastio_SAMD51.h index 93136911f..ecd9acea4 100644 --- a/Marlin/src/HAL/HAL_SAMD51/fastio_SAMD51.h +++ b/Marlin/src/HAL/HAL_SAMD51/fastio_SAMD51.h @@ -243,6 +243,7 @@ #define DIO5_PIN PIN_PC21 #define DIO16_PIN PIN_PC22 #define DIO17_PIN PIN_PC23 + #define DIO88_PIN PIN_PC24 // NEOPIXEL // PORTD #define DIO22_PIN PIN_PD12 #define DIO6_PIN PIN_PD20 diff --git a/Marlin/src/HAL/HAL_SAMD51/inc/SanityCheck.h b/Marlin/src/HAL/HAL_SAMD51/inc/SanityCheck.h index 0d45b28c3..0f27d8bf3 100644 --- a/Marlin/src/HAL/HAL_SAMD51/inc/SanityCheck.h +++ b/Marlin/src/HAL/HAL_SAMD51/inc/SanityCheck.h @@ -32,7 +32,7 @@ #endif #if ENABLED(EMERGENCY_PARSER) - #error "EMERGENCY_PARSER is not yet implemented for STM32F4. Disable EMERGENCY_PARSER to continue." + #error "EMERGENCY_PARSER is not yet implemented for SAMD51. Disable EMERGENCY_PARSER to continue." #endif #if ENABLED(SDIO_SUPPORT) diff --git a/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp b/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp index b2df7a16a..b2e1ebc17 100644 --- a/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp +++ b/Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp @@ -22,7 +22,6 @@ */ #if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) - #include "../../inc/MarlinConfig.h" #include @@ -73,16 +72,22 @@ void spiInit(uint8_t spiRate) { // Use datarates Marlin uses uint32_t clock; switch (spiRate) { - case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000 - case SPI_HALF_SPEED: clock = 5000000; break; - case SPI_QUARTER_SPEED: clock = 2500000; break; - case SPI_EIGHTH_SPEED: clock = 1250000; break; - case SPI_SPEED_5: clock = 625000; break; - case SPI_SPEED_6: clock = 300000; break; - default: - clock = 4000000; // Default from the SPI library + case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000 + case SPI_HALF_SPEED: clock = 5000000; break; + case SPI_QUARTER_SPEED: clock = 2500000; break; + case SPI_EIGHTH_SPEED: clock = 1250000; break; + case SPI_SPEED_5: clock = 625000; break; + case SPI_SPEED_6: clock = 300000; break; + default: + clock = 4000000; // Default from the SPI library } spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0); + #if defined(MISO_PIN) && defined(SDSS) && defined(MOSI_PIN) && defined(SCK_PIN) + SPI.setMISO(MISO_PIN); + SPI.setSSEL(SDSS); + SPI.setMOSI(MOSI_PIN); + SPI.setSCLK(SCK_PIN); + #endif SPI.begin(); } diff --git a/Marlin/src/HAL/HAL_STM32/fastio_STM32.h b/Marlin/src/HAL/HAL_STM32/fastio_STM32.h index 29ddf5faa..917ee3a1a 100644 --- a/Marlin/src/HAL/HAL_STM32/fastio_STM32.h +++ b/Marlin/src/HAL/HAL_STM32/fastio_STM32.h @@ -53,7 +53,7 @@ void FastIO_init(); // Must be called before using fast io macros #define _WRITE(IO, V) do { \ if (V) FastIOPortMap[STM_PORT(digitalPin[IO])]->BSRR = _BV32(STM_PIN(digitalPin[IO])) ; \ else FastIOPortMap[STM_PORT(digitalPin[IO])]->BRR = _BV32(STM_PIN(digitalPin[IO])) ; \ - } while(0) + }while(0) #else #define _WRITE(IO, V) (FastIOPortMap[STM_PORT(digitalPin[IO])]->BSRR = _BV32(STM_PIN(digitalPin[IO]) + (V ? 0 : 16))) #endif diff --git a/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h b/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h index 92d14d027..138633b50 100644 --- a/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h +++ b/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h @@ -189,7 +189,7 @@ void port_print(const pin_t Ard_num) { for (Index = 0; Index < NUMBER_PINS_TOTAL; Index++) if (Ard_num == GET_PIN_MAP_PIN_M43(Index)) break; - char * const ppa = pin_xref[Index].Port_pin_alpha; + const char * ppa = pin_xref[Index].Port_pin_alpha; sprintf_P(buffer, PSTR("%s"), ppa); SERIAL_ECHO(buffer); if (ppa[3] == '\0') SERIAL_CHAR(' '); diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_spi_STM32F1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_spi_STM32F1.cpp index 5acae7bf9..4b8177add 100644 --- a/Marlin/src/HAL/HAL_STM32F1/HAL_spi_STM32F1.cpp +++ b/Marlin/src/HAL/HAL_STM32F1/HAL_spi_STM32F1.cpp @@ -33,7 +33,7 @@ #ifdef __STM32F1__ #include "../../inc/MarlinConfig.h" -#include +#include "SPI.h" // ------------------------ // Public functions diff --git a/Marlin/src/HAL/HAL_STM32F1/SPI.cpp b/Marlin/src/HAL/HAL_STM32F1/SPI.cpp new file mode 100644 index 000000000..3b9d4aeb0 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F1/SPI.cpp @@ -0,0 +1,741 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @author Marti Bolivar + * @brief Wirish SPI implementation. + */ + +#ifdef __STM32F1__ + +#include "SPI.h" + +#include +#include +#include + +#include +#include + +/** Time in ms for DMA receive timeout */ +#define DMA_TIMEOUT 100 + +#if CYCLES_PER_MICROSECOND != 72 + #warning "Unexpected clock speed; SPI frequency calculation will be incorrect" +#endif + +struct spi_pins { + uint8_t nss; + uint8_t sck; + uint8_t miso; + uint8_t mosi; +}; + +static const spi_pins* dev_to_spi_pins(spi_dev *dev); +static void configure_gpios(spi_dev *dev, bool as_master); +static spi_baud_rate determine_baud_rate(spi_dev *dev, uint32_t freq); + +#if (BOARD_NR_SPI >= 3) && !defined(STM32_HIGH_DENSITY) + #error "The SPI library is misconfigured: 3 SPI ports only available on high density STM32 devices" +#endif + +static const spi_pins board_spi_pins[] __FLASH__ = { + #if BOARD_NR_SPI >= 1 + { BOARD_SPI1_NSS_PIN, + BOARD_SPI1_SCK_PIN, + BOARD_SPI1_MISO_PIN, + BOARD_SPI1_MOSI_PIN }, + #endif + #if BOARD_NR_SPI >= 2 + { BOARD_SPI2_NSS_PIN, + BOARD_SPI2_SCK_PIN, + BOARD_SPI2_MISO_PIN, + BOARD_SPI2_MOSI_PIN }, + #endif + #if BOARD_NR_SPI >= 3 + { BOARD_SPI3_NSS_PIN, + BOARD_SPI3_SCK_PIN, + BOARD_SPI3_MISO_PIN, + BOARD_SPI3_MOSI_PIN }, + #endif +}; + +#if BOARD_NR_SPI >= 1 + static void (*_spi1_this); +#endif +#if BOARD_NR_SPI >= 2 + static void (*_spi2_this); +#endif +#if BOARD_NR_SPI >= 3 + static void (*_spi3_this); +#endif + +/** + * Constructor + */ +SPIClass::SPIClass(uint32_t spi_num) { + _currentSetting=&_settings[spi_num-1];// SPI channels are called 1 2 and 3 but the array is zero indexed + + switch (spi_num) { + #if BOARD_NR_SPI >= 1 + case 1: + _currentSetting->spi_d = SPI1; + _spi1_this = (void*)this; + break; + #endif + #if BOARD_NR_SPI >= 2 + case 2: + _currentSetting->spi_d = SPI2; + _spi2_this = (void*)this; + break; + #endif + #if BOARD_NR_SPI >= 3 + case 3: + _currentSetting->spi_d = SPI3; + _spi3_this = (void*)this; + break; + #endif + default: ASSERT(0); + } + + // Init things specific to each SPI device + // clock divider setup is a bit of hack, and needs to be improved at a later date. + #if BOARD_NR_SPI >= 1 + _settings[0].spi_d = SPI1; + _settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock); + _settings[0].spiDmaDev = DMA1; + _settings[0].spiTxDmaChannel = DMA_CH3; + _settings[0].spiRxDmaChannel = DMA_CH2; + #endif + #if BOARD_NR_SPI >= 2 + _settings[1].spi_d = SPI2; + _settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock); + _settings[1].spiDmaDev = DMA1; + _settings[1].spiTxDmaChannel = DMA_CH5; + _settings[1].spiRxDmaChannel = DMA_CH4; + #endif + #if BOARD_NR_SPI >= 3 + _settings[2].spi_d = SPI3; + _settings[2].clockDivider = determine_baud_rate(_settings[2].spi_d, _settings[2].clock); + _settings[2].spiDmaDev = DMA2; + _settings[2].spiTxDmaChannel = DMA_CH2; + _settings[2].spiRxDmaChannel = DMA_CH1; + #endif + + // added for DMA callbacks. + _currentSetting->state = SPI_STATE_IDLE; +} + +/* + * Set up/tear down + */ +void SPIClass::updateSettings() { + uint32_t flags = ((_currentSetting->bitOrder == MSBFIRST ? SPI_FRAME_MSB : SPI_FRAME_LSB) | _currentSetting->dataSize | SPI_SW_SLAVE | SPI_SOFT_SS); + spi_master_enable(_currentSetting->spi_d, (spi_baud_rate)_currentSetting->clockDivider, (spi_mode)_currentSetting->dataMode, flags); +} + +void SPIClass::begin() { + spi_init(_currentSetting->spi_d); + configure_gpios(_currentSetting->spi_d, 1); + updateSettings(); + // added for DMA callbacks. + _currentSetting->state = SPI_STATE_READY; +} + +void SPIClass::beginSlave() { + spi_init(_currentSetting->spi_d); + configure_gpios(_currentSetting->spi_d, 0); + uint32_t flags = ((_currentSetting->bitOrder == MSBFIRST ? SPI_FRAME_MSB : SPI_FRAME_LSB) | _currentSetting->dataSize); + spi_slave_enable(_currentSetting->spi_d, (spi_mode)_currentSetting->dataMode, flags); + // added for DMA callbacks. + _currentSetting->state = SPI_STATE_READY; +} + +void SPIClass::end() { + if (!spi_is_enabled(_currentSetting->spi_d)) + return; + + // Follows RM0008's sequence for disabling a SPI in master/slave + // full duplex mode. + while (spi_is_rx_nonempty(_currentSetting->spi_d)) { + // FIXME [0.1.0] remove this once you have an interrupt based driver + volatile uint16_t rx __attribute__((unused)) = spi_rx_reg(_currentSetting->spi_d); + } + while (!spi_is_tx_empty(_currentSetting->spi_d)) {}; + while (spi_is_busy(_currentSetting->spi_d)) {}; + + spi_peripheral_disable(_currentSetting->spi_d); + // added for DMA callbacks. + // Need to add unsetting the callbacks for the DMA channels. + _currentSetting->state = SPI_STATE_IDLE; +} + +/* Roger Clark added 3 functions */ +void SPIClass::setClockDivider(uint32_t clockDivider) { + _currentSetting->clockDivider = clockDivider; + uint32_t cr1 = _currentSetting->spi_d->regs->CR1 & ~(SPI_CR1_BR); + _currentSetting->spi_d->regs->CR1 = cr1 | (clockDivider & SPI_CR1_BR); +} + +void SPIClass::setBitOrder(BitOrder bitOrder) { + _currentSetting->bitOrder = bitOrder; + uint32_t cr1 = _currentSetting->spi_d->regs->CR1 & ~(SPI_CR1_LSBFIRST); + if (bitOrder == LSBFIRST) cr1 |= SPI_CR1_LSBFIRST; + _currentSetting->spi_d->regs->CR1 = cr1; +} + +/* Victor Perez. Added to test changing datasize from 8 to 16 bit modes on the fly. +* Input parameter should be SPI_CR1_DFF set to 0 or 1 on a 32bit word. +* +*/ +void SPIClass::setDataSize(uint32_t datasize) { + _currentSetting->dataSize = datasize; + uint32_t cr1 = _currentSetting->spi_d->regs->CR1 & ~(SPI_CR1_DFF); + uint8_t en = spi_is_enabled(_currentSetting->spi_d); + spi_peripheral_disable(_currentSetting->spi_d); + _currentSetting->spi_d->regs->CR1 = cr1 | (datasize & SPI_CR1_DFF) | en; +} + +void SPIClass::setDataMode(uint8_t dataMode) { + /* Notes: + As far as I can tell, the AVR numbers for dataMode appear to match the numbers required by the STM32 + From the AVR doc http://www.atmel.com/images/doc2585.pdf section 2.4 + SPI Mode CPOL CPHA Shift SCK-edge Capture SCK-edge + 0 0 0 Falling Rising + 1 0 1 Rising Falling + 2 1 0 Rising Falling + 3 1 1 Falling Rising + + On the STM32 it appears to be + + bit 1 - CPOL : Clock polarity + (This bit should not be changed when communication is ongoing) + 0 : CLK to 0 when idle + 1 : CLK to 1 when idle + + bit 0 - CPHA : Clock phase + (This bit should not be changed when communication is ongoing) + 0 : The first clock transition is the first data capture edge + 1 : The second clock transition is the first data capture edge + + If someone finds this is not the case or sees a logic error with this let me know ;-) + */ + _currentSetting->dataMode = dataMode; + uint32_t cr1 = _currentSetting->spi_d->regs->CR1 & ~(SPI_CR1_CPOL|SPI_CR1_CPHA); + _currentSetting->spi_d->regs->CR1 = cr1 | (dataMode & (SPI_CR1_CPOL|SPI_CR1_CPHA)); +} + +void SPIClass::beginTransaction(uint8_t pin, SPISettings settings) { + setBitOrder(settings.bitOrder); + setDataMode(settings.dataMode); + setDataSize(settings.dataSize); + setClockDivider(determine_baud_rate(_currentSetting->spi_d, settings.clock)); + begin(); +} + +void SPIClass::beginTransactionSlave(SPISettings settings) { + setBitOrder(settings.bitOrder); + setDataMode(settings.dataMode); + setDataSize(settings.dataSize); + beginSlave(); +} + +void SPIClass::endTransaction() { } + + +/* + * I/O + */ + +uint16_t SPIClass::read() { + while ( spi_is_rx_nonempty(_currentSetting->spi_d)==0 ) ; + return (uint16)spi_rx_reg(_currentSetting->spi_d); +} + +void SPIClass::read(uint8_t *buf, uint32_t len) { + if (len == 0) return; + spi_rx_reg(_currentSetting->spi_d); // clear the RX buffer in case a byte is waiting on it. + spi_reg_map * regs = _currentSetting->spi_d->regs; + // start sequence: write byte 0 + regs->DR = 0x00FF; // write the first byte + // main loop + while ( (--len) ) { + while( !(regs->SR & SPI_SR_TXE) ); // wait for TXE flag + noInterrupts(); // go atomic level - avoid interrupts to surely get the previously received data + regs->DR = 0x00FF; // write the next data item to be transmitted into the SPI_DR register. This clears the TXE flag. + while ( !(regs->SR & SPI_SR_RXNE) ); // wait till data is available in the DR register + *buf++ = (uint8)(regs->DR); // read and store the received byte. This clears the RXNE flag. + interrupts(); // let systick do its job + } + // read remaining last byte + while ( !(regs->SR & SPI_SR_RXNE) ) {} // wait till data is available in the Rx register + *buf++ = (uint8)(regs->DR); // read and store the received byte +} + +void SPIClass::write(uint16_t data) { + /* Added for 16bit data Victor Perez. Roger Clark + * Improved speed by just directly writing the single byte to the SPI data reg and wait for completion, + * by taking the Tx code from transfer(byte) + * This almost doubles the speed of this function. + */ + spi_tx_reg(_currentSetting->spi_d, data); // write the data to be transmitted into the SPI_DR register (this clears the TXE flag) + while (spi_is_tx_empty(_currentSetting->spi_d) == 0); // "5. Wait until TXE=1 ..." + while (spi_is_busy(_currentSetting->spi_d) != 0); // "... and then wait until BSY=0 before disabling the SPI." +} + +void SPIClass::write16(uint16_t data) { + // Added by stevestrong: write two consecutive bytes in 8 bit mode (DFF=0) + spi_tx_reg(_currentSetting->spi_d, data>>8); // write high byte + while (spi_is_tx_empty(_currentSetting->spi_d) == 0); // Wait until TXE=1 + spi_tx_reg(_currentSetting->spi_d, data); // write low byte + while (spi_is_tx_empty(_currentSetting->spi_d) == 0); // Wait until TXE=1 + while (spi_is_busy(_currentSetting->spi_d) != 0); // wait until BSY=0 +} + +void SPIClass::write(uint16_t data, uint32_t n) { + // Added by stevstrong: Repeatedly send same data by the specified number of times + spi_reg_map * regs = _currentSetting->spi_d->regs; + while ( (n--)>0 ) { + regs->DR = data; // write the data to be transmitted into the SPI_DR register (this clears the TXE flag) + while ( (regs->SR & SPI_SR_TXE)==0 ) ; // wait till Tx empty + } + while ( (regs->SR & SPI_SR_BSY) != 0); // wait until BSY=0 before returning +} + +void SPIClass::write(const void *data, uint32_t length) { + spi_dev * spi_d = _currentSetting->spi_d; + spi_tx(spi_d, data, length); // data can be array of bytes or words + while (spi_is_tx_empty(spi_d) == 0); // "5. Wait until TXE=1 ..." + while (spi_is_busy(spi_d) != 0); // "... and then wait until BSY=0 before disabling the SPI." +} + +uint8_t SPIClass::transfer(uint8_t byte) const { + spi_dev * spi_d = _currentSetting->spi_d; + spi_rx_reg(spi_d); // read any previous data + spi_tx_reg(spi_d, byte); // Write the data item to be transmitted into the SPI_DR register + while (spi_is_tx_empty(spi_d) == 0); // "5. Wait until TXE=1 ..." + while (spi_is_busy(spi_d) != 0); // "... and then wait until BSY=0 before disabling the SPI." + return (uint8)spi_rx_reg(spi_d); // "... and read the last received data." +} + +uint16_t SPIClass::transfer16(uint16_t data) const { + // Modified by stevestrong: write & read two consecutive bytes in 8 bit mode (DFF=0) + // This is more effective than two distinct byte transfers + spi_dev * spi_d = _currentSetting->spi_d; + spi_rx_reg(spi_d); // read any previous data + spi_tx_reg(spi_d, data>>8); // write high byte + while (spi_is_tx_empty(spi_d) == 0); // wait until TXE=1 + while (spi_is_busy(spi_d) != 0); // wait until BSY=0 + uint16_t ret = spi_rx_reg(spi_d)<<8; // read and shift high byte + spi_tx_reg(spi_d, data); // write low byte + while (spi_is_tx_empty(spi_d) == 0); // wait until TXE=1 + while (spi_is_busy(spi_d) != 0); // wait until BSY=0 + ret += spi_rx_reg(spi_d); // read low byte + return ret; +} + +/* Roger Clark and Victor Perez, 2015 +* Performs a DMA SPI transfer with at least a receive buffer. +* If a TX buffer is not provided, FF is sent over and over for the lenght of the transfer. +* On exit TX buffer is not modified, and RX buffer cotains the received data. +* Still in progress. +*/ +void SPIClass::dmaTransferSet(const void *transmitBuf, void *receiveBuf) { + dma_init(_currentSetting->spiDmaDev); + //spi_rx_dma_enable(_currentSetting->spi_d); + //spi_tx_dma_enable(_currentSetting->spi_d); + dma_xfer_size dma_bit_size = (_currentSetting->dataSize==DATA_SIZE_16BIT) ? DMA_SIZE_16BITS : DMA_SIZE_8BITS; + dma_setup_transfer(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, &_currentSetting->spi_d->regs->DR, + dma_bit_size, receiveBuf, dma_bit_size, (DMA_MINC_MODE | DMA_TRNS_CMPLT ));// receive buffer DMA + if (!transmitBuf) { + transmitBuf = &ff; + dma_setup_transfer(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &_currentSetting->spi_d->regs->DR, + dma_bit_size, (volatile void*)transmitBuf, dma_bit_size, (DMA_FROM_MEM));// Transmit FF repeatedly + } + else { + dma_setup_transfer(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &_currentSetting->spi_d->regs->DR, + dma_bit_size, (volatile void*)transmitBuf, dma_bit_size, (DMA_MINC_MODE | DMA_FROM_MEM ));// Transmit buffer DMA + } + dma_set_priority(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, DMA_PRIORITY_LOW); + dma_set_priority(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, DMA_PRIORITY_VERY_HIGH); +} + +uint8_t SPIClass::dmaTransferRepeat(uint16_t length) { + if (length == 0) return 0; + if (spi_is_rx_nonempty(_currentSetting->spi_d) == 1) spi_rx_reg(_currentSetting->spi_d); + _currentSetting->state = SPI_STATE_TRANSFER; + dma_set_num_transfers(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, length); + dma_set_num_transfers(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, length); + dma_enable(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel);// enable receive + dma_enable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel);// enable transmit + spi_rx_dma_enable(_currentSetting->spi_d); + spi_tx_dma_enable(_currentSetting->spi_d); + if (_currentSetting->receiveCallback) + return 0; + + //uint32_t m = millis(); + uint8_t b = 0; + uint32_t m = millis(); + while ((dma_get_isr_bits(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel) & DMA_ISR_TCIF1) == 0) { + //Avoid interrupts and just loop waiting for the flag to be set. + if ((millis() - m) > DMA_TIMEOUT) { b = 2; break; } + } + + while (spi_is_tx_empty(_currentSetting->spi_d) == 0); // "5. Wait until TXE=1 ..." + while (spi_is_busy(_currentSetting->spi_d) != 0); // "... and then wait until BSY=0 before disabling the SPI." + spi_tx_dma_disable(_currentSetting->spi_d); + spi_rx_dma_disable(_currentSetting->spi_d); + dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); + dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel); + dma_clear_isr_bits(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel); + dma_clear_isr_bits(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); + _currentSetting->state = SPI_STATE_READY; + return b; +} + +/* Roger Clark and Victor Perez, 2015 + * Performs a DMA SPI transfer with at least a receive buffer. + * If a TX buffer is not provided, FF is sent over and over for the length of the transfer. + * On exit TX buffer is not modified, and RX buffer contains the received data. + * Still in progress. + */ +uint8_t SPIClass::dmaTransfer(const void *transmitBuf, void *receiveBuf, uint16_t length) { + dmaTransferSet(transmitBuf, receiveBuf); + return dmaTransferRepeat(length); +} + +/* Roger Clark and Victor Perez, 2015 + * Performs a DMA SPI send using a TX buffer. + * On exit TX buffer is not modified. + * Still in progress. + * 2016 - stevstrong - reworked to automatically detect bit size from SPI setting + */ +void SPIClass::dmaSendSet(const void * transmitBuf, bool minc) { + uint32_t flags = ( (DMA_MINC_MODE*minc) | DMA_FROM_MEM | DMA_TRNS_CMPLT); + dma_init(_currentSetting->spiDmaDev); + dma_xfer_size dma_bit_size = (_currentSetting->dataSize==DATA_SIZE_16BIT) ? DMA_SIZE_16BITS : DMA_SIZE_8BITS; + dma_setup_transfer(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &_currentSetting->spi_d->regs->DR, dma_bit_size, + (volatile void*)transmitBuf, dma_bit_size, flags);// Transmit buffer DMA + dma_set_priority(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, DMA_PRIORITY_LOW); +} + +uint8_t SPIClass::dmaSendRepeat(uint16_t length) { + if (length == 0) return 0; + + dma_clear_isr_bits(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); + dma_set_num_transfers(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, length); + _currentSetting->state = SPI_STATE_TRANSMIT; + dma_enable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel);// enable transmit + spi_tx_dma_enable(_currentSetting->spi_d); + if (_currentSetting->transmitCallback) + return 0; + + uint32_t m = millis(); + uint8_t b = 0; + while ((dma_get_isr_bits(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel) & DMA_ISR_TCIF1)==0) { + //Avoid interrupts and just loop waiting for the flag to be set. + if ((millis() - m) > DMA_TIMEOUT) { b = 2; break; } + } + while (spi_is_tx_empty(_currentSetting->spi_d) == 0); // "5. Wait until TXE=1 ..." + while (spi_is_busy(_currentSetting->spi_d) != 0); // "... and then wait until BSY=0 before disabling the SPI." + spi_tx_dma_disable(_currentSetting->spi_d); + dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); + dma_clear_isr_bits(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); + _currentSetting->state = SPI_STATE_READY; + return b; +} + +uint8_t SPIClass::dmaSend(const void * transmitBuf, uint16_t length, bool minc) { + dmaSendSet(transmitBuf, minc); + return dmaSendRepeat(length); +} + +uint8_t SPIClass::dmaSendAsync(const void * transmitBuf, uint16_t length, bool minc) { + uint8_t b = 0; + + if (_currentSetting->state != SPI_STATE_READY) { + uint32_t m = millis(); + while ((dma_get_isr_bits(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel) & DMA_ISR_TCIF1)==0) { + //Avoid interrupts and just loop waiting for the flag to be set. + //delayMicroseconds(10); + if ((millis() - m) > DMA_TIMEOUT) { b = 2; break; } + } + + while (spi_is_tx_empty(_currentSetting->spi_d) == 0); // "5. Wait until TXE=1 ..." + while (spi_is_busy(_currentSetting->spi_d) != 0); // "... and then wait until BSY=0 before disabling the SPI." + spi_tx_dma_disable(_currentSetting->spi_d); + dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); + _currentSetting->state = SPI_STATE_READY; + } + + if (length == 0) return 0; + uint32_t flags = ( (DMA_MINC_MODE*minc) | DMA_FROM_MEM | DMA_TRNS_CMPLT); + + dma_init(_currentSetting->spiDmaDev); + // TX + dma_xfer_size dma_bit_size = (_currentSetting->dataSize==DATA_SIZE_16BIT) ? DMA_SIZE_16BITS : DMA_SIZE_8BITS; + dma_setup_transfer(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &_currentSetting->spi_d->regs->DR, + dma_bit_size, (volatile void*)transmitBuf, dma_bit_size, flags);// Transmit buffer DMA + dma_set_num_transfers(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, length); + dma_clear_isr_bits(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); + dma_enable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel);// enable transmit + spi_tx_dma_enable(_currentSetting->spi_d); + + _currentSetting->state = SPI_STATE_TRANSMIT; + return b; +} + + +/** + * New functions added to manage callbacks. + * Victor Perez 2017 + */ +void SPIClass::onReceive(void(*callback)(void)) { + _currentSetting->receiveCallback = callback; + if (callback) { + switch (_currentSetting->spi_d->clk_id) { + #if BOARD_NR_SPI >= 1 + case RCC_SPI1: + dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, &SPIClass::_spi1EventCallback); + break; + #endif + #if BOARD_NR_SPI >= 2 + case RCC_SPI2: + dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, &SPIClass::_spi2EventCallback); + break; + #endif + #if BOARD_NR_SPI >= 3 + case RCC_SPI3: + dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel, &SPIClass::_spi3EventCallback); + break; + #endif + default: + ASSERT(0); + } + } + else { + dma_detach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel); + } +} + +void SPIClass::onTransmit(void(*callback)(void)) { + _currentSetting->transmitCallback = callback; + if (callback) { + switch (_currentSetting->spi_d->clk_id) { + #if BOARD_NR_SPI >= 1 + case RCC_SPI1: + dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &SPIClass::_spi1EventCallback); + break; + #endif + #if BOARD_NR_SPI >= 2 + case RCC_SPI2: + dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &SPIClass::_spi2EventCallback); + break; + #endif + #if BOARD_NR_SPI >= 3 + case RCC_SPI3: + dma_attach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel, &SPIClass::_spi3EventCallback); + break; + #endif + default: + ASSERT(0); + } + } + else { + dma_detach_interrupt(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); + } +} + +/** + * TODO: check if better to first call the customer code, next disable the DMA requests. + * Also see if we need to check whether callbacks are set or not, may be better to be checked + * during the initial setup and only set the callback to EventCallback if they are set. + */ +void SPIClass::EventCallback() { + while (spi_is_tx_empty(_currentSetting->spi_d) == 0); // "5. Wait until TXE=1 ..." + while (spi_is_busy(_currentSetting->spi_d) != 0); // "... and then wait until BSY=0" + switch (_currentSetting->state) { + case SPI_STATE_TRANSFER: + while (spi_is_rx_nonempty(_currentSetting->spi_d)); + _currentSetting->state = SPI_STATE_READY; + spi_tx_dma_disable(_currentSetting->spi_d); + spi_rx_dma_disable(_currentSetting->spi_d); + //dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); + //dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiRxDmaChannel); + if (_currentSetting->receiveCallback) + _currentSetting->receiveCallback(); + break; + case SPI_STATE_TRANSMIT: + _currentSetting->state = SPI_STATE_READY; + spi_tx_dma_disable(_currentSetting->spi_d); + //dma_disable(_currentSetting->spiDmaDev, _currentSetting->spiTxDmaChannel); + if (_currentSetting->transmitCallback) + _currentSetting->transmitCallback(); + break; + default: + break; + } +} + +void SPIClass::attachInterrupt() { + // Should be enableInterrupt() +} + +void SPIClass::detachInterrupt() { + // Should be disableInterrupt() +} + +/* + * Pin accessors + */ + +uint8_t SPIClass::misoPin() { + return dev_to_spi_pins(_currentSetting->spi_d)->miso; +} + +uint8_t SPIClass::mosiPin() { + return dev_to_spi_pins(_currentSetting->spi_d)->mosi; +} + +uint8_t SPIClass::sckPin() { + return dev_to_spi_pins(_currentSetting->spi_d)->sck; +} + +uint8_t SPIClass::nssPin() { + return dev_to_spi_pins(_currentSetting->spi_d)->nss; +} + +/* + * Deprecated functions + */ + +uint8_t SPIClass::send(uint8_t data) { + this->write(data); + return 1; +} + +uint8_t SPIClass::send(uint8_t *buf, uint32_t len) { + this->write(buf, len); + return len; +} + +uint8_t SPIClass::recv() { + return this->read(); +} + +/* + * DMA call back functions, one per port. + */ +#if BOARD_NR_SPI >= 1 + void SPIClass::_spi1EventCallback() { + reinterpret_cast(_spi1_this)->EventCallback(); + } +#endif +#if BOARD_NR_SPI >= 2 + void SPIClass::_spi2EventCallback() { + reinterpret_cast(_spi2_this)->EventCallback(); + } +#endif +#if BOARD_NR_SPI >= 3 + void SPIClass::_spi3EventCallback() { + reinterpret_cast(_spi3_this)->EventCallback(); + } +#endif + +/* + * Auxiliary functions + */ +static const spi_pins* dev_to_spi_pins(spi_dev *dev) { + switch (dev->clk_id) { + #if BOARD_NR_SPI >= 1 + case RCC_SPI1: return board_spi_pins; + #endif + #if BOARD_NR_SPI >= 2 + case RCC_SPI2: return board_spi_pins + 1; + #endif + #if BOARD_NR_SPI >= 3 + case RCC_SPI3: return board_spi_pins + 2; + #endif + default: return NULL; + } +} + +static void disable_pwm(const stm32_pin_info *i) { + if (i->timer_device) + timer_set_mode(i->timer_device, i->timer_channel, TIMER_DISABLED); +} + +static void configure_gpios(spi_dev *dev, bool as_master) { + const spi_pins *pins = dev_to_spi_pins(dev); + if (!pins) return; + + const stm32_pin_info *nssi = &PIN_MAP[pins->nss], + *scki = &PIN_MAP[pins->sck], + *misoi = &PIN_MAP[pins->miso], + *mosii = &PIN_MAP[pins->mosi]; + + disable_pwm(nssi); + disable_pwm(scki); + disable_pwm(misoi); + disable_pwm(mosii); + + spi_config_gpios(dev, as_master, nssi->gpio_device, nssi->gpio_bit, + scki->gpio_device, scki->gpio_bit, misoi->gpio_bit, + mosii->gpio_bit); +} + +static const spi_baud_rate baud_rates[8] __FLASH__ = { + SPI_BAUD_PCLK_DIV_2, + SPI_BAUD_PCLK_DIV_4, + SPI_BAUD_PCLK_DIV_8, + SPI_BAUD_PCLK_DIV_16, + SPI_BAUD_PCLK_DIV_32, + SPI_BAUD_PCLK_DIV_64, + SPI_BAUD_PCLK_DIV_128, + SPI_BAUD_PCLK_DIV_256, +}; + +/* +* Note: This assumes you're on a LeafLabs-style board +* (CYCLES_PER_MICROSECOND == 72, APB2 at 72MHz, APB1 at 36MHz). +*/ +static spi_baud_rate determine_baud_rate(spi_dev *dev, uint32_t freq) { + uint32_t clock = 0; + switch (rcc_dev_clk(dev->clk_id)) { + case RCC_AHB: + case RCC_APB2: clock = STM32_PCLK2; break; // 72 Mhz + case RCC_APB1: clock = STM32_PCLK1; break; // 36 Mhz + } + clock >>= 1; + + uint8_t i = 0; + while (i < 7 && freq < clock) { clock >>= 1; i++; } + return baud_rates[i]; +} + +SPIClass SPI(1); + +#endif // __STM32F1__ diff --git a/Marlin/src/HAL/HAL_STM32F1/SPI.h b/Marlin/src/HAL/HAL_STM32F1/SPI.h new file mode 100644 index 000000000..1e77bf106 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32F1/SPI.h @@ -0,0 +1,409 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ +#pragma once + +#include +#include +#include + +#include +#include +#include + +// SPI_HAS_TRANSACTION means SPI has +// - beginTransaction() +// - endTransaction() +// - usingInterrupt() +// - SPISetting(clock, bitOrder, dataMode) +//#define SPI_HAS_TRANSACTION + +#define SPI_CLOCK_DIV2 SPI_BAUD_PCLK_DIV_2 +#define SPI_CLOCK_DIV4 SPI_BAUD_PCLK_DIV_4 +#define SPI_CLOCK_DIV8 SPI_BAUD_PCLK_DIV_8 +#define SPI_CLOCK_DIV16 SPI_BAUD_PCLK_DIV_16 +#define SPI_CLOCK_DIV32 SPI_BAUD_PCLK_DIV_32 +#define SPI_CLOCK_DIV64 SPI_BAUD_PCLK_DIV_64 +#define SPI_CLOCK_DIV128 SPI_BAUD_PCLK_DIV_128 +#define SPI_CLOCK_DIV256 SPI_BAUD_PCLK_DIV_256 + +/* + * Roger Clark. 20150106 + * Commented out redundant AVR defined + * +#define SPI_MODE_MASK 0x0C // CPOL = bit 3, CPHA = bit 2 on SPCR +#define SPI_CLOCK_MASK 0x03 // SPR1 = bit 1, SPR0 = bit 0 on SPCR +#define SPI_2XCLOCK_MASK 0x01 // SPI2X = bit 0 on SPSR + +// define SPI_AVR_EIMSK for AVR boards with external interrupt pins +#if defined(EIMSK) + #define SPI_AVR_EIMSK EIMSK +#elif defined(GICR) + #define SPI_AVR_EIMSK GICR +#elif defined(GIMSK) + #define SPI_AVR_EIMSK GIMSK +#endif +*/ + +#ifndef STM32_LSBFIRST + #define STM32_LSBFIRST 0 +#endif +#ifndef STM32_MSBFIRST + #define STM32_MSBFIRST 1 +#endif + +// PC13 or PA4 +#define BOARD_SPI_DEFAULT_SS PA4 +//#define BOARD_SPI_DEFAULT_SS PC13 + +#define SPI_MODE0 SPI_MODE_0 +#define SPI_MODE1 SPI_MODE_1 +#define SPI_MODE2 SPI_MODE_2 +#define SPI_MODE3 SPI_MODE_3 + +#define DATA_SIZE_8BIT SPI_CR1_DFF_8_BIT +#define DATA_SIZE_16BIT SPI_CR1_DFF_16_BIT + +typedef enum { + SPI_STATE_IDLE, + SPI_STATE_READY, + SPI_STATE_RECEIVE, + SPI_STATE_TRANSMIT, + SPI_STATE_TRANSFER +} spi_mode_t; + +class SPISettings { +public: + SPISettings(uint32_t clock, BitOrder bitOrder, uint8_t dataMode) { + if (__builtin_constant_p(clock)) + init_AlwaysInline(clock, bitOrder, dataMode, DATA_SIZE_8BIT); + else + init_MightInline(clock, bitOrder, dataMode, DATA_SIZE_8BIT); + } + SPISettings(uint32_t clock, BitOrder bitOrder, uint8_t dataMode, uint32_t dataSize) { + if (__builtin_constant_p(clock)) + init_AlwaysInline(clock, bitOrder, dataMode, dataSize); + else + init_MightInline(clock, bitOrder, dataMode, dataSize); + } + SPISettings(uint32_t clock) { + if (__builtin_constant_p(clock)) + init_AlwaysInline(clock, MSBFIRST, SPI_MODE0, DATA_SIZE_8BIT); + else + init_MightInline(clock, MSBFIRST, SPI_MODE0, DATA_SIZE_8BIT); + } + SPISettings() { + init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0, DATA_SIZE_8BIT); + } +private: + void init_MightInline(uint32_t clock, BitOrder bitOrder, uint8_t dataMode, uint32_t dataSize) { + init_AlwaysInline(clock, bitOrder, dataMode, dataSize); + } + void init_AlwaysInline(uint32_t clock, BitOrder bitOrder, uint8_t dataMode, uint32_t dataSize) __attribute__((__always_inline__)) { + this->clock = clock; + this->bitOrder = bitOrder; + this->dataMode = dataMode; + this->dataSize = dataSize; + } + uint32_t clock; + uint32_t dataSize; + uint32_t clockDivider; + BitOrder bitOrder; + uint8_t dataMode; + uint8_t _SSPin; + volatile spi_mode_t state; + spi_dev *spi_d; + dma_channel spiRxDmaChannel, spiTxDmaChannel; + dma_dev* spiDmaDev; + void (*receiveCallback)(void) = NULL; + void (*transmitCallback)(void) = NULL; + + friend class SPIClass; +}; + +/* + * Kept for compat. + */ +static const uint8_t ff = 0xFF; + +/** + * @brief Wirish SPI interface. + * + * This implementation uses software slave management, so the caller + * is responsible for controlling the slave select line. + */ +class SPIClass { + +public: + /** + * @param spiPortNumber Number of the SPI port to manage. + */ + SPIClass(uint32_t spiPortNumber); + + /** + * @brief Equivalent to begin(SPI_1_125MHZ, MSBFIRST, 0). + */ + void begin(); + + /** + * @brief Turn on a SPI port and set its GPIO pin modes for use as a slave. + * + * SPI port is enabled in full duplex mode, with software slave management. + * + * @param bitOrder Either LSBFIRST (little-endian) or MSBFIRST(big-endian) + * @param mode SPI mode to use + */ + void beginSlave(uint32_t bitOrder, uint32_t mode); + + /** + * @brief Equivalent to beginSlave(MSBFIRST, 0). + */ + void beginSlave(); + + /** + * @brief Disables the SPI port, but leaves its GPIO pin modes unchanged. + */ + void end(); + + void beginTransaction(SPISettings settings) { beginTransaction(BOARD_SPI_DEFAULT_SS, settings); } + void beginTransaction(uint8_t pin, SPISettings settings); + void endTransaction(); + + void beginTransactionSlave(SPISettings settings); + + void setClockDivider(uint32_t clockDivider); + void setBitOrder(BitOrder bitOrder); + void setDataMode(uint8_t dataMode); + + // SPI Configuration methods + void attachInterrupt(); + void detachInterrupt(); + + /* Victor Perez. Added to change datasize from 8 to 16 bit modes on the fly. + * Input parameter should be SPI_CR1_DFF set to 0 or 1 on a 32bit word. + * Requires an added function spi_data_size on STM32F1 / cores / maple / libmaple / spi.c + */ + void setDataSize(uint32_t ds); + + /* Victor Perez 2017. Added to set and clear callback functions for callback + * on DMA transfer completion. + * onReceive used to set the callback in case of dmaTransfer (tx/rx), once rx is completed + * onTransmit used to set the callback in case of dmaSend (tx only). That function + * will NOT be called in case of TX/RX + */ + void onReceive(void(*)(void)); + void onTransmit(void(*)(void)); + + /* + * I/O + */ + + /** + * @brief Return the next unread byte/word. + * + * If there is no unread byte/word waiting, this function will block + * until one is received. + */ + uint16_t read(); + + /** + * @brief Read length bytes, storing them into buffer. + * @param buffer Buffer to store received bytes into. + * @param length Number of bytes to store in buffer. This + * function will block until the desired number of + * bytes have been read. + */ + void read(uint8_t *buffer, uint32_t length); + + /** + * @brief Transmit one byte/word. + * @param data to transmit. + */ + void write(uint16_t data); + void write16(uint16_t data); // write 2 bytes in 8 bit mode (DFF=0) + + /** + * @brief Transmit one byte/word a specified number of times. + * @param data to transmit. + */ + void write(uint16_t data, uint32_t n); + + /** + * @brief Transmit multiple bytes/words. + * @param buffer Bytes/words to transmit. + * @param length Number of bytes/words in buffer to transmit. + */ + void write(const void * buffer, uint32_t length); + + /** + * @brief Transmit a byte, then return the next unread byte. + * + * This function transmits before receiving. + * + * @param data Byte to transmit. + * @return Next unread byte. + */ + uint8_t transfer(uint8_t data) const; + uint16_t transfer16(uint16_t data) const; + + /** + * @brief Sets up a DMA Transfer for "length" bytes. + * The transfer mode (8 or 16 bit mode) is evaluated from the SPI peripheral setting. + * + * This function transmits and receives to buffers. + * + * @param transmitBuf buffer Bytes to transmit. If passed as 0, it sends FF repeatedly for "length" bytes + * @param receiveBuf buffer Bytes to save received data. + * @param length Number of bytes in buffer to transmit. + */ + uint8_t dmaTransfer(const void * transmitBuf, void * receiveBuf, uint16_t length); + void dmaTransferSet(const void *transmitBuf, void *receiveBuf); + uint8_t dmaTransferRepeat(uint16_t length); + + /** + * @brief Sets up a DMA Transmit for SPI 8 or 16 bit transfer mode. + * The transfer mode (8 or 16 bit mode) is evaluated from the SPI peripheral setting. + * + * This function only transmits and does not care about the RX fifo. + * + * @param data buffer half words to transmit, + * @param length Number of bytes in buffer to transmit. + * @param minc Set to use Memory Increment mode, clear to use Circular mode. + */ + uint8_t dmaSend(const void * transmitBuf, uint16_t length, bool minc = 1); + void dmaSendSet(const void * transmitBuf, bool minc); + uint8_t dmaSendRepeat(uint16_t length); + + uint8_t dmaSendAsync(const void * transmitBuf, uint16_t length, bool minc = 1); + /* + * Pin accessors + */ + + /** + * @brief Return the number of the MISO (master in, slave out) pin + */ + uint8_t misoPin(); + + /** + * @brief Return the number of the MOSI (master out, slave in) pin + */ + uint8_t mosiPin(); + + /** + * @brief Return the number of the SCK (serial clock) pin + */ + uint8_t sckPin(); + + /** + * @brief Return the number of the NSS (slave select) pin + */ + uint8_t nssPin(); + + /* Escape hatch */ + + /** + * @brief Get a pointer to the underlying libmaple spi_dev for + * this HardwareSPI instance. + */ + spi_dev* c_dev(void) { return _currentSetting->spi_d; } + + spi_dev* dev() { return _currentSetting->spi_d; } + + /** + * @brief Sets the number of the SPI peripheral to be used by + * this HardwareSPI instance. + * + * @param spi_num Number of the SPI port. 1-2 in low density devices + * or 1-3 in high density devices. + */ + void setModule(int spi_num) { + _currentSetting=&_settings[spi_num-1];// SPI channels are called 1 2 and 3 but the array is zero indexed + } + + /* -- The following methods are deprecated --------------------------- */ + + /** + * @brief Deprecated. + * + * Use HardwareSPI::transfer() instead. + * + * @see HardwareSPI::transfer() + */ + uint8_t send(uint8_t data); + + /** + * @brief Deprecated. + * + * Use HardwareSPI::write() in combination with + * HardwareSPI::read() (or HardwareSPI::transfer()) instead. + * + * @see HardwareSPI::write() + * @see HardwareSPI::read() + * @see HardwareSPI::transfer() + */ + uint8_t send(uint8_t *data, uint32_t length); + + /** + * @brief Deprecated. + * + * Use HardwareSPI::read() instead. + * + * @see HardwareSPI::read() + */ + uint8_t recv(); + +private: + + SPISettings _settings[BOARD_NR_SPI]; + SPISettings *_currentSetting; + + void updateSettings(); + + /* + * Functions added for DMA transfers with Callback. + * Experimental. + */ + + void EventCallback(); + + #if BOARD_NR_SPI >= 1 + static void _spi1EventCallback(); + #endif + #if BOARD_NR_SPI >= 2 + static void _spi2EventCallback(); + #endif + #if BOARD_NR_SPI >= 3 + static void _spi3EventCallback(); + #endif + /* + spi_dev *spi_d; + uint8_t _SSPin; + uint32_t clockDivider; + uint8_t dataMode; + BitOrder bitOrder; + */ +}; + +extern SPIClass SPI; diff --git a/Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h b/Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h index 6cc7a72d9..463d951c1 100644 --- a/Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h +++ b/Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h @@ -38,8 +38,8 @@ #define _SET_OUTPUT(IO) _SET_MODE(IO, GPIO_OUTPUT_PP) #define _SET_OUTPUT_OD(IO) _SET_MODE(IO, GPIO_OUTPUT_OD) -#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); } while(0) -#define OUT_WRITE_OD(IO,V) do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); } while(0) +#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0) +#define OUT_WRITE_OD(IO,V) do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0) #define SET_INPUT(IO) _SET_MODE(IO, GPIO_INPUT_FLOATING) #define SET_INPUT_PULLUP(IO) _SET_MODE(IO, GPIO_INPUT_PU) diff --git a/Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp b/Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp index 7004d88ff..8097a2848 100644 --- a/Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp +++ b/Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp @@ -42,7 +42,6 @@ // Store settings in the last two pages // Flash pages must be erased before writing, so keep track. bool firstWrite = false; -uint32_t pageBase = EEPROM_START_ADDRESS; bool PersistentStore::access_start() { firstWrite = true; @@ -67,42 +66,27 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui firstWrite = false; } - // First write full words - int i = 0; - int wordsToWrite = size / sizeof(uint16_t); - uint16_t* wordBuffer = (uint16_t *)value; - while (wordsToWrite) { - status = FLASH_ProgramHalfWord(pageBase + pos + (i * 2), wordBuffer[i]); - if (status != FLASH_COMPLETE) return true; - wordsToWrite--; - i++; - } - - // Now, write any remaining single byte - const uint16_t odd = size & 1; - if (odd) { - uint16_t temp = value[size - 1]; - status = FLASH_ProgramHalfWord(pageBase + pos + i, temp); - if (status != FLASH_COMPLETE) return true; + for (size_t i = 0; i < size; i++) { + if (FLASH_ProgramHalfWord(EEPROM_PAGE0_BASE + (pos + i) * 2, value[i]) != FLASH_COMPLETE) + return true; } crc16(crc, value, size); - pos += size + odd; + pos += size; return false; } bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uint16_t *crc, const bool writing/*=true*/) { - for (uint16_t i = 0; i < size; i++) { - byte* accessPoint = (byte*)(pageBase + pos + i); - uint8_t c = *accessPoint; - if (writing) value[i] = c; - crc16(crc, &c, 1); + for (size_t i = 0; i < size; i++) { + uint8_t v = *(uint16_t *)(EEPROM_PAGE0_BASE + (pos + i) * 2); + if (writing) value[i] = v; + crc16(crc, &v, 1); } - pos += ((size + 1) & ~1); // i.e., size+(size&1), round up odd values + pos += size; return false; } -size_t PersistentStore::capacity() { return E2END + 1; } +size_t PersistentStore::capacity() { return size_t(E2END + 1); } #endif // EEPROM_SETTINGS && EEPROM FLASH #endif // __STM32F1__ diff --git a/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F4/HAL_timers_STM32F4.cpp b/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F4/HAL_timers_STM32F4.cpp index 45ea7fc98..26ea90e6d 100644 --- a/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F4/HAL_timers_STM32F4.cpp +++ b/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F4/HAL_timers_STM32F4.cpp @@ -53,56 +53,40 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { switch (timer_num) { case STEP_TIMER_NUM: // STEPPER TIMER TIM5 - use a 32bit timer - #ifdef STM32GENERIC - __HAL_RCC_TIM5_CLK_ENABLE(); - TimerHandle[timer_num].handle.Instance = TIM5; - TimerHandle[timer_num].handle.Init.Prescaler = step_prescaler; - TimerHandle[timer_num].handle.Init.CounterMode = TIM_COUNTERMODE_UP; - TimerHandle[timer_num].handle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; - TimerHandle[timer_num].callback = (uint32_t)TC5_Handler; - #else - TimerHandle[timer_num].timer = TIM5; - TimerHandle[timer_num].irqHandle = TC5_Handler; - TimerHandleInit(&TimerHandle[timer_num], (((HAL_TIMER_RATE) / step_prescaler) / frequency) - 1, step_prescaler); - #endif + __HAL_RCC_TIM5_CLK_ENABLE(); + TimerHandle[timer_num].handle.Instance = TIM5; + TimerHandle[timer_num].handle.Init.Prescaler = step_prescaler; + TimerHandle[timer_num].handle.Init.CounterMode = TIM_COUNTERMODE_UP; + TimerHandle[timer_num].handle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + TimerHandle[timer_num].callback = (uint32_t)TC5_Handler; HAL_NVIC_SetPriority(STEP_TIMER_IRQ_ID, 1, 0); break; case TEMP_TIMER_NUM: // TEMP TIMER TIM7 - any available 16bit Timer (1 already used for PWM) - #ifdef STM32GENERIC - __HAL_RCC_TIM7_CLK_ENABLE(); - TimerHandle[timer_num].handle.Instance = TIM7; - TimerHandle[timer_num].handle.Init.Prescaler = temp_prescaler; - TimerHandle[timer_num].handle.Init.CounterMode = TIM_COUNTERMODE_UP; - TimerHandle[timer_num].handle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; - TimerHandle[timer_num].callback = (uint32_t)TC7_Handler; - #else - TimerHandle[timer_num].timer = TIM7; - TimerHandle[timer_num].irqHandle = TC7_Handler; - TimerHandleInit(&TimerHandle[timer_num], (((HAL_TIMER_RATE) / temp_prescaler) / frequency) - 1, temp_prescaler); - #endif + __HAL_RCC_TIM7_CLK_ENABLE(); + TimerHandle[timer_num].handle.Instance = TIM7; + TimerHandle[timer_num].handle.Init.Prescaler = temp_prescaler; + TimerHandle[timer_num].handle.Init.CounterMode = TIM_COUNTERMODE_UP; + TimerHandle[timer_num].handle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + TimerHandle[timer_num].callback = (uint32_t)TC7_Handler; HAL_NVIC_SetPriority(TEMP_TIMER_IRQ_ID, 2, 0); break; } timers_initialized[timer_num] = true; } - #ifdef STM32GENERIC - TimerHandle[timer_num].handle.Init.Period = (((HAL_TIMER_RATE) / TimerHandle[timer_num].handle.Init.Prescaler) / frequency) - 1; - if (HAL_TIM_Base_Init(&TimerHandle[timer_num].handle) == HAL_OK) - HAL_TIM_Base_Start_IT(&TimerHandle[timer_num].handle); - #endif + TimerHandle[timer_num].handle.Init.Period = (((HAL_TIMER_RATE) / TimerHandle[timer_num].handle.Init.Prescaler) / frequency) - 1; + if (HAL_TIM_Base_Init(&TimerHandle[timer_num].handle) == HAL_OK) + HAL_TIM_Base_Start_IT(&TimerHandle[timer_num].handle); } -#ifdef STM32GENERIC - extern "C" void TIM5_IRQHandler() { - ((void(*)(void))TimerHandle[0].callback)(); - } - extern "C" void TIM7_IRQHandler() { - ((void(*)(void))TimerHandle[1].callback)(); - } -#endif +extern "C" void TIM5_IRQHandler() { + ((void(*)(void))TimerHandle[0].callback)(); +} +extern "C" void TIM7_IRQHandler() { + ((void(*)(void))TimerHandle[1].callback)(); +} void HAL_timer_enable_interrupt(const uint8_t timer_num) { switch (timer_num) { diff --git a/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F7/HAL_timers_STM32F7.cpp b/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F7/HAL_timers_STM32F7.cpp index 8da2fc0cf..32697d7cc 100644 --- a/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F7/HAL_timers_STM32F7.cpp +++ b/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F7/HAL_timers_STM32F7.cpp @@ -59,8 +59,9 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { timerConfig[0].IRQ_Id = TIM5_IRQn; timerConfig[0].callback = (uint32_t)TC5_Handler; HAL_NVIC_SetPriority(timerConfig[0].IRQ_Id, 1, 0); - SET_OUTPUT(STEPPER_ENABLE_PIN); - WRITE(STEPPER_ENABLE_PIN); + #if PIN_EXISTS(STEPPER_ENABLE) + OUT_WRITE(STEPPER_ENABLE_PIN, HIGH); + #endif break; case TEMP_TIMER_NUM: //TEMP TIMER TIM7 // any available 16bit Timer (1 already used for PWM) diff --git a/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F7/TMC2660.cpp b/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F7/TMC2660.cpp index 2f60bf354..698681e7f 100644 --- a/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F7/TMC2660.cpp +++ b/Marlin/src/HAL/HAL_STM32_F4_F7/STM32F7/TMC2660.cpp @@ -189,7 +189,6 @@ void TMC26XStepper::start() { pinMode(step_pin, OUTPUT); pinMode(dir_pin, OUTPUT); pinMode(cs_pin, OUTPUT); - //SET_OUTPUT(STEPPER_ENABLE_PIN); extDigitalWrite(step_pin, LOW); extDigitalWrite(dir_pin, LOW); extDigitalWrite(cs_pin, HIGH); diff --git a/Marlin/src/HAL/HAL_STM32_F4_F7/eeprom_emul.cpp b/Marlin/src/HAL/HAL_STM32_F4_F7/eeprom_emul.cpp index f8db99d3f..1c9de1e21 100644 --- a/Marlin/src/HAL/HAL_STM32_F4_F7/eeprom_emul.cpp +++ b/Marlin/src/HAL/HAL_STM32_F4_F7/eeprom_emul.cpp @@ -86,6 +86,8 @@ uint16_t EE_Initialize(void) { pEraseInit.NbSectors = 1; pEraseInit.VoltageRange = VOLTAGE_RANGE; + HAL_StatusTypeDef FlashStatus; // = HAL_OK + /* Check for invalid header states and repair if necessary */ uint32_t SectorError; switch (PageStatus0) { @@ -135,7 +137,7 @@ uint16_t EE_Initialize(void) { } } /* Mark Page0 as valid */ - HAL_StatusTypeDef FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE0_BASE_ADDRESS, VALID_PAGE); + FlashStatus = HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, PAGE0_BASE_ADDRESS, VALID_PAGE); /* If program operation was failed, a Flash error code is returned */ if (FlashStatus != HAL_OK) return FlashStatus; pEraseInit.Sector = PAGE1_ID; diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp index d6285225c..a548fc43a 100644 --- a/Marlin/src/Marlin.cpp +++ b/Marlin/src/Marlin.cpp @@ -65,7 +65,7 @@ #include "feature/host_actions.h" #endif -#if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER) +#if USE_BEEPER #include "libs/buzzer.h" #endif @@ -290,6 +290,15 @@ void enable_all_steppers() { enable_E5(); } +void enable_e_steppers() { + enable_E0(); + enable_E1(); + enable_E2(); + enable_E3(); + enable_E4(); + enable_E5(); +} + void disable_e_steppers() { disable_E0(); disable_E1(); @@ -539,28 +548,28 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) { #if ENABLED(SWITCHING_EXTRUDER) bool oldstatus; switch (active_extruder) { - default: oldstatus = E0_ENABLE_READ; enable_E0(); break; + default: oldstatus = E0_ENABLE_READ(); enable_E0(); break; #if E_STEPPERS > 1 - case 2: case 3: oldstatus = E1_ENABLE_READ; enable_E1(); break; + case 2: case 3: oldstatus = E1_ENABLE_READ(); enable_E1(); break; #if E_STEPPERS > 2 - case 4: case 5: oldstatus = E2_ENABLE_READ; enable_E2(); break; + case 4: case 5: oldstatus = E2_ENABLE_READ(); enable_E2(); break; #endif // E_STEPPERS > 2 #endif // E_STEPPERS > 1 } #else // !SWITCHING_EXTRUDER bool oldstatus; switch (active_extruder) { - default: oldstatus = E0_ENABLE_READ; enable_E0(); break; + default: oldstatus = E0_ENABLE_READ(); enable_E0(); break; #if E_STEPPERS > 1 - case 1: oldstatus = E1_ENABLE_READ; enable_E1(); break; + case 1: oldstatus = E1_ENABLE_READ(); enable_E1(); break; #if E_STEPPERS > 2 - case 2: oldstatus = E2_ENABLE_READ; enable_E2(); break; + case 2: oldstatus = E2_ENABLE_READ(); enable_E2(); break; #if E_STEPPERS > 3 - case 3: oldstatus = E3_ENABLE_READ; enable_E3(); break; + case 3: oldstatus = E3_ENABLE_READ(); enable_E3(); break; #if E_STEPPERS > 4 - case 4: oldstatus = E4_ENABLE_READ; enable_E4(); break; + case 4: oldstatus = E4_ENABLE_READ(); enable_E4(); break; #if E_STEPPERS > 5 - case 5: oldstatus = E5_ENABLE_READ; enable_E5(); break; + case 5: oldstatus = E5_ENABLE_READ(); enable_E5(); break; #endif // E_STEPPERS > 5 #endif // E_STEPPERS > 4 #endif // E_STEPPERS > 3 @@ -693,7 +702,7 @@ void idle( print_job_timer.tick(); #endif - #if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER) && DISABLED(PCA9632_BUZZER) + #if USE_BEEPER buzzer.tick(); #endif @@ -877,6 +886,10 @@ void setup() { runout.setup(); #endif + #if ENABLED(POWER_LOSS_RECOVERY) + recovery.setup(); + #endif + setup_killpin(); #if HAS_TMC220x @@ -1117,6 +1130,10 @@ void setup() { init_closedloop(); #endif + #ifdef STARTUP_COMMANDS + queue.inject_P(PSTR(STARTUP_COMMANDS)); + #endif + #if ENABLED(INIT_SDCARD_ON_BOOT) && !HAS_SPI_LCD card.beginautostart(); #endif diff --git a/Marlin/src/Marlin.h b/Marlin/src/Marlin.h index cef5950b9..db24382bc 100644 --- a/Marlin/src/Marlin.h +++ b/Marlin/src/Marlin.h @@ -316,6 +316,7 @@ void manage_inactivity(const bool ignore_stepper_queue=false); /** * The axis order in all axis related arrays is X, Y, Z, E */ +void enable_e_steppers(); void enable_all_steppers(); void disable_e_stepper(const uint8_t e); void disable_e_steppers(); diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 9f11c6a3f..1d432f681 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -95,7 +95,7 @@ #define BOARD_Z_BOLT_X_SERIES 1141 // Z-Bolt X Series #define BOARD_TT_OSCAR 1142 // TT OSCAR #define BOARD_OVERLORD 1143 // Overlord/Overlord Pro -#define BOARD_ULTIMAKER 1144 // ADIMLab Granty v1 +#define BOARD_HJC2560C_REV1 1144 // ADIMLab Granty v1 #define BOARD_HJC2560C_REV2 1145 // ADIMLab Granty v2 // @@ -115,24 +115,25 @@ #define BOARD_CNCONTROLS_11 1300 // Cartesio CN Controls V11 #define BOARD_CNCONTROLS_12 1301 // Cartesio CN Controls V12 -#define BOARD_CHEAPTRONIC 1302 // Cheaptronic v1.0 -#define BOARD_CHEAPTRONIC_V2 1303 // Cheaptronic v2.0 -#define BOARD_MIGHTYBOARD_REVE 1304 // Makerbot Mightyboard Revision E -#define BOARD_MEGATRONICS 1305 // Megatronics -#define BOARD_MEGATRONICS_2 1306 // Megatronics v2.0 -#define BOARD_MEGATRONICS_3 1307 // Megatronics v3.0 -#define BOARD_MEGATRONICS_31 1308 // Megatronics v3.1 -#define BOARD_MEGATRONICS_32 1309 // Megatronics v3.2 -#define BOARD_ELEFU_3 1310 // Elefu Ra Board (v3) -#define BOARD_LEAPFROG 1311 // Leapfrog -#define BOARD_MEGACONTROLLER 1312 // Mega controller -#define BOARD_GT2560_REV_A 1313 // Geeetech GT2560 Rev. A -#define BOARD_GT2560_REV_A_PLUS 1314 // Geeetech GT2560 Rev. A+ (with auto level probe) -#define BOARD_GT2560_V3 1315 // Geeetech GT2560 Rev B for A10(M/D) -#define BOARD_GT2560_V3_MC2 1316 // Geeetech GT2560 Rev B for Mecreator2 -#define BOARD_GT2560_V3_A20 1317 // Geeetech GT2560 Rev B for A20(M/D) -#define BOARD_EINSTART_S 1318 // Einstart retrofit -#define BOARD_WANHAO_ONEPLUS 1319 // Wanhao 0ne+ i3 Mini +#define BOARD_CNCONTROLS_15 1302 // Cartesio CN Controls V15 +#define BOARD_CHEAPTRONIC 1303 // Cheaptronic v1.0 +#define BOARD_CHEAPTRONIC_V2 1304 // Cheaptronic v2.0 +#define BOARD_MIGHTYBOARD_REVE 1305 // Makerbot Mightyboard Revision E +#define BOARD_MEGATRONICS 1306 // Megatronics +#define BOARD_MEGATRONICS_2 1307 // Megatronics v2.0 +#define BOARD_MEGATRONICS_3 1308 // Megatronics v3.0 +#define BOARD_MEGATRONICS_31 1309 // Megatronics v3.1 +#define BOARD_MEGATRONICS_32 1310 // Megatronics v3.2 +#define BOARD_ELEFU_3 1311 // Elefu Ra Board (v3) +#define BOARD_LEAPFROG 1312 // Leapfrog +#define BOARD_MEGACONTROLLER 1313 // Mega controller +#define BOARD_GT2560_REV_A 1314 // Geeetech GT2560 Rev. A +#define BOARD_GT2560_REV_A_PLUS 1315 // Geeetech GT2560 Rev. A+ (with auto level probe) +#define BOARD_GT2560_V3 1316 // Geeetech GT2560 Rev B for A10(M/D) +#define BOARD_GT2560_V3_MC2 1317 // Geeetech GT2560 Rev B for Mecreator2 +#define BOARD_GT2560_V3_A20 1318 // Geeetech GT2560 Rev B for A20(M/D) +#define BOARD_EINSTART_S 1319 // Einstart retrofit +#define BOARD_WANHAO_ONEPLUS 1320 // Wanhao 0ne+ i3 Mini // // ATmega1281, ATmega2561 @@ -292,6 +293,7 @@ #define BOARD_BLACK_STM32F407ZE 4205 // BLACK_STM32F407ZE #define BOARD_STEVAL 4206 // STEVAL-3DP001V1 3D PRINTER BOARD #define BOARD_BIGTREE_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG) +#define BOARD_BIGTREE_BTT002_V1_0 4208 // BigTreeTech BTT002 v1.0 (STM32F407VE) // // ARM Cortex M7 diff --git a/Marlin/src/core/drivers.h b/Marlin/src/core/drivers.h index 617090a6f..005ffb7da 100644 --- a/Marlin/src/core/drivers.h +++ b/Marlin/src/core/drivers.h @@ -67,12 +67,14 @@ #define AXIS_DRIVER_TYPE(A,T) AXIS_DRIVER_TYPE_##A(T) +#define HAS_E_DRIVER(T) ( AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) \ + || AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) \ + || AXIS_DRIVER_TYPE_E4(T) || AXIS_DRIVER_TYPE_E5(T) ) + #define HAS_DRIVER(T) ( AXIS_DRIVER_TYPE_X(T) || AXIS_DRIVER_TYPE_X2(T) \ || AXIS_DRIVER_TYPE_Y(T) || AXIS_DRIVER_TYPE_Y2(T) \ || AXIS_DRIVER_TYPE_Z(T) || AXIS_DRIVER_TYPE_Z2(T) || AXIS_DRIVER_TYPE_Z3(T) \ - || AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) \ - || AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) \ - || AXIS_DRIVER_TYPE_E4(T) || AXIS_DRIVER_TYPE_E5(T) ) + || HAS_E_DRIVER(T) ) // Test for supported TMC drivers that require advanced configuration // Does not match standalone configurations diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h index a6e546a4a..eb2b41d65 100644 --- a/Marlin/src/core/macros.h +++ b/Marlin/src/core/macros.h @@ -118,24 +118,24 @@ // Using GCC extensions, but Travis GCC version does not like it and gives // "error: statement-expressions are not allowed outside functions nor in template-argument lists" #define NOLESS(v, n) \ - do { \ + do{ \ __typeof__(n) _n = (n); \ if (v < _n) v = _n; \ - } while(0) + }while(0) #define NOMORE(v, n) \ - do { \ + do{ \ __typeof__(n) _n = (n); \ if (v > _n) v = _n; \ - } while(0) + }while(0) #define LIMIT(v, n1, n2) \ - do { \ + do{ \ __typeof__(n1) _n1 = (n1); \ __typeof__(n2) _n2 = (n2); \ if (v < _n1) v = _n1; \ else if (v > _n2) v = _n2; \ - } while(0) + }while(0) #endif diff --git a/Marlin/src/core/serial.h b/Marlin/src/core/serial.h index bae554bcc..463b9b6f5 100644 --- a/Marlin/src/core/serial.h +++ b/Marlin/src/core/serial.h @@ -184,5 +184,5 @@ void print_bin(const uint16_t val); void print_xyz(PGM_P const prefix, PGM_P const suffix, const float x, const float y, const float z); void print_xyz(PGM_P const prefix, PGM_P const suffix, const float xyz[]); -#define SERIAL_POS(SUFFIX,VAR) do { print_xyz(PSTR(" " STRINGIFY(VAR) "="), PSTR(" : " SUFFIX "\n"), VAR); } while(0) -#define SERIAL_XYZ(PREFIX,V...) do { print_xyz(PSTR(PREFIX), nullptr, V); } while(0) +#define SERIAL_POS(SUFFIX,VAR) do { print_xyz(PSTR(" " STRINGIFY(VAR) "="), PSTR(" : " SUFFIX "\n"), VAR); }while(0) +#define SERIAL_XYZ(PREFIX,V...) do { print_xyz(PSTR(PREFIX), nullptr, V); }while(0) diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp index 568f76615..6b6233f82 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp @@ -752,16 +752,15 @@ save_ubl_active_state_and_disable(); // No bed level correction so only raw data is obtained DEPLOY_PROBE(); - uint8_t count = GRID_MAX_POINTS, current = 1; + uint8_t count = GRID_MAX_POINTS; do { - current = (GRID_MAX_POINTS) - count + 1; - if (do_ubl_mesh_map) display_map(g29_map_type); - SERIAL_ECHOLNPAIR("\nProbing mesh point ", int(current), "/", int(GRID_MAX_POINTS), ".\n"); + const int current = (GRID_MAX_POINTS) - count + 1; + SERIAL_ECHOLNPAIR("\nProbing mesh point ", current, "/", int(GRID_MAX_POINTS), ".\n"); #if HAS_DISPLAY - ui.status_printf_P(0, PSTR(MSG_PROBING_MESH " %i/%i"), int(current), int(GRID_MAX_POINTS)); + ui.status_printf_P(0, PSTR(MSG_PROBING_MESH " %i/%i"), current, int(GRID_MAX_POINTS)); #endif #if HAS_LCD_MENU @@ -1500,8 +1499,7 @@ DEBUG_ECHO_F(rx, 7); DEBUG_CHAR(','); DEBUG_ECHO_F(ry, 7); - DEBUG_ECHOPGM(") logical: "); - DEBUG_CHAR('('); + DEBUG_ECHOPGM(") logical: ("); DEBUG_ECHO_F(LOGICAL_X_POSITION(rx), 7); DEBUG_CHAR(','); DEBUG_ECHO_F(LOGICAL_Y_POSITION(ry), 7); diff --git a/Marlin/src/feature/controllerfan.cpp b/Marlin/src/feature/controllerfan.cpp index a75f4d982..00d895aa6 100644 --- a/Marlin/src/feature/controllerfan.cpp +++ b/Marlin/src/feature/controllerfan.cpp @@ -36,35 +36,37 @@ void controllerfan_update() { if (ELAPSED(ms, nextMotorCheck)) { nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s + const bool xory = X_ENABLE_READ() == X_ENABLE_ON || Y_ENABLE_READ() == Y_ENABLE_ON; + // If any of the drivers or the bed are enabled... - if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON + if (xory || Z_ENABLE_READ() == Z_ENABLE_ON #if HAS_HEATED_BED || thermalManager.temp_bed.soft_pwm_amount > 0 #endif #if HAS_X2_ENABLE - || X2_ENABLE_READ == X_ENABLE_ON + || X2_ENABLE_READ() == X_ENABLE_ON #endif #if HAS_Y2_ENABLE - || Y2_ENABLE_READ == Y_ENABLE_ON + || Y2_ENABLE_READ() == Y_ENABLE_ON #endif #if HAS_Z2_ENABLE - || Z2_ENABLE_READ == Z_ENABLE_ON + || Z2_ENABLE_READ() == Z_ENABLE_ON #endif #if HAS_Z3_ENABLE - || Z3_ENABLE_READ == Z_ENABLE_ON + || Z3_ENABLE_READ() == Z_ENABLE_ON #endif #if E_STEPPERS - || E0_ENABLE_READ == E_ENABLE_ON + || E0_ENABLE_READ() == E_ENABLE_ON #if E_STEPPERS > 1 - || E1_ENABLE_READ == E_ENABLE_ON + || E1_ENABLE_READ() == E_ENABLE_ON #if E_STEPPERS > 2 - || E2_ENABLE_READ == E_ENABLE_ON + || E2_ENABLE_READ() == E_ENABLE_ON #if E_STEPPERS > 3 - || E3_ENABLE_READ == E_ENABLE_ON + || E3_ENABLE_READ() == E_ENABLE_ON #if E_STEPPERS > 4 - || E4_ENABLE_READ == E_ENABLE_ON + || E4_ENABLE_READ() == E_ENABLE_ON #if E_STEPPERS > 5 - || E5_ENABLE_READ == E_ENABLE_ON + || E5_ENABLE_READ() == E_ENABLE_ON #endif // E_STEPPERS > 5 #endif // E_STEPPERS > 4 #endif // E_STEPPERS > 3 @@ -76,12 +78,17 @@ void controllerfan_update() { } // Fan off if no steppers have been enabled for CONTROLLERFAN_SECS seconds - uint8_t speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : CONTROLLERFAN_SPEED; - controllerfan_speed = speed; + controllerfan_speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : ( + #ifdef CONTROLLERFAN_SPEED_Z_ONLY + xory ? CONTROLLERFAN_SPEED : CONTROLLERFAN_SPEED_Z_ONLY + #else + CONTROLLERFAN_SPEED + #endif + ); - // allows digital or PWM fan output to be used (see M42 handling) - WRITE(CONTROLLER_FAN_PIN, speed); - analogWrite(pin_t(CONTROLLER_FAN_PIN), speed); + // Allow digital or PWM fan output (see M42 handling) + WRITE(CONTROLLER_FAN_PIN, controllerfan_speed); + analogWrite(pin_t(CONTROLLER_FAN_PIN), controllerfan_speed); } } diff --git a/Marlin/src/feature/leds/leds.cpp b/Marlin/src/feature/leds/leds.cpp index e5e952ed6..210aeef09 100644 --- a/Marlin/src/feature/leds/leds.cpp +++ b/Marlin/src/feature/leds/leds.cpp @@ -125,7 +125,7 @@ void LEDLights::set_color(const LEDColor &incol // If the pins can do PWM then their intensity will be set. #define UPDATE_RGBW(C,c) do { if (PWM_PIN(RGB_LED_##C##_PIN)) \ analogWrite(pin_t(RGB_LED_##C##_PIN), incol.c); \ - else WRITE(RGB_LED_##C##_PIN, incol.c ? HIGH : LOW); } while(0) + else WRITE(RGB_LED_##C##_PIN, incol.c ? HIGH : LOW); }while(0) UPDATE_RGBW(R,r); UPDATE_RGBW(G,g); UPDATE_RGBW(B,b); diff --git a/Marlin/src/feature/leds/pca9632.cpp b/Marlin/src/feature/leds/pca9632.cpp index 6f69bd31e..87589a9bc 100644 --- a/Marlin/src/feature/leds/pca9632.cpp +++ b/Marlin/src/feature/leds/pca9632.cpp @@ -137,13 +137,15 @@ void pca9632_set_led_color(const LEDColor &color) { } #if ENABLED(PCA9632_BUZZER) - void pca9632_buzz(uint16_t const f, uint16_t d) { - UNUSED(f); UNUSED(d); + + void pca9632_buzz(const long duration, const uint16_t freq) { + UNUSED(duration); UNUSED(freq); uint8_t data[] = PCA9632_BUZZER_DATA; Wire.beginTransmission(I2C_ADDRESS(PCA9632_ADDRESS)); Wire.write(data, sizeof(data)); Wire.endTransmission(); } -#endif + +#endif // PCA9632_BUZZER #endif // PCA9632 diff --git a/Marlin/src/feature/leds/pca9632.h b/Marlin/src/feature/leds/pca9632.h index 023e45197..2abdf7c7a 100644 --- a/Marlin/src/feature/leds/pca9632.h +++ b/Marlin/src/feature/leds/pca9632.h @@ -32,5 +32,6 @@ typedef LEDColor LEDColor; void pca9632_set_led_color(const LEDColor &color); #if ENABLED(PCA9632_BUZZER) - void pca9632_buzz(uint16_t const, uint16_t); + #include + void pca9632_buzz(const long, const uint16_t); #endif diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp index 5700591ca..aca275b39 100644 --- a/Marlin/src/feature/pause.cpp +++ b/Marlin/src/feature/pause.cpp @@ -187,6 +187,9 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l host_action_prompt_button(PSTR("Continue")); host_action_prompt_show(); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::onStatusChanged(PSTR("Load Filament")); + #endif while (wait_for_user) { #if HAS_BUZZER filament_change_beep(max_beep_count); @@ -239,6 +242,9 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l #if ENABLED(HOST_PROMPT_SUPPORT) host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Continuous Purge Running..."), PSTR("Continue")); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::onStatusChanged(PSTR("Continuous Purge Running...")); + #endif for (float purge_count = purge_length; purge_count > 0 && wait_for_user; --purge_count) do_pause_e_move(1, ADVANCED_PAUSE_PURGE_FEEDRATE); wait_for_user = false; @@ -353,8 +359,8 @@ bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/, planner.settings.retract_acceleration = saved_acceleration; #endif - // Disable extruders steppers for manual filament changing (only on boards that have separate ENABLE_PINS) - #if (E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN) || AXIS_DRIVER_TYPE_E0(TMC2660) || AXIS_DRIVER_TYPE_E1(TMC2660) || AXIS_DRIVER_TYPE_E2(TMC2660) || AXIS_DRIVER_TYPE_E3(TMC2660) || AXIS_DRIVER_TYPE_E4(TMC2660) || AXIS_DRIVER_TYPE_E5(TMC2660) + // Disable E steppers for manual change + #if HAS_E_STEPPER_ENABLE disable_e_stepper(active_extruder); safe_delay(100); #endif @@ -517,6 +523,9 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep #if ENABLED(HOST_PROMPT_SUPPORT) host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Nozzle Parked"), PSTR("Continue")); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::onStatusChanged(PSTR("Nozzle Parked")); + #endif while (wait_for_user) { #if HAS_BUZZER filament_change_beep(max_beep_count); @@ -538,6 +547,10 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep host_prompt_do(PROMPT_USER_CONTINUE, PSTR("HeaterTimeout"), PSTR("Reheat")); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::onStatusChanged(PSTR("HeaterTimeout")); + #endif + // Wait for LCD click or M108 while (wait_for_user) idle(true); diff --git a/Marlin/src/feature/power.cpp b/Marlin/src/feature/power.cpp index ff012ee6b..2ff82331b 100644 --- a/Marlin/src/feature/power.cpp +++ b/Marlin/src/feature/power.cpp @@ -55,31 +55,31 @@ bool Power::is_power_needed() { #endif // If any of the drivers or the bed are enabled... - if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON + if (X_ENABLE_READ() == X_ENABLE_ON || Y_ENABLE_READ() == Y_ENABLE_ON || Z_ENABLE_READ() == Z_ENABLE_ON #if HAS_HEATED_BED || thermalManager.temp_bed.soft_pwm_amount > 0 #endif #if HAS_X2_ENABLE - || X2_ENABLE_READ == X_ENABLE_ON + || X2_ENABLE_READ() == X_ENABLE_ON #endif #if HAS_Y2_ENABLE - || Y2_ENABLE_READ == Y_ENABLE_ON + || Y2_ENABLE_READ() == Y_ENABLE_ON #endif #if HAS_Z2_ENABLE - || Z2_ENABLE_READ == Z_ENABLE_ON + || Z2_ENABLE_READ() == Z_ENABLE_ON #endif #if E_STEPPERS - || E0_ENABLE_READ == E_ENABLE_ON + || E0_ENABLE_READ() == E_ENABLE_ON #if E_STEPPERS > 1 - || E1_ENABLE_READ == E_ENABLE_ON + || E1_ENABLE_READ() == E_ENABLE_ON #if E_STEPPERS > 2 - || E2_ENABLE_READ == E_ENABLE_ON + || E2_ENABLE_READ() == E_ENABLE_ON #if E_STEPPERS > 3 - || E3_ENABLE_READ == E_ENABLE_ON + || E3_ENABLE_READ() == E_ENABLE_ON #if E_STEPPERS > 4 - || E4_ENABLE_READ == E_ENABLE_ON + || E4_ENABLE_READ() == E_ENABLE_ON #if E_STEPPERS > 5 - || E5_ENABLE_READ == E_ENABLE_ON + || E5_ENABLE_READ() == E_ENABLE_ON #endif // E_STEPPERS > 5 #endif // E_STEPPERS > 4 #endif // E_STEPPERS > 3 diff --git a/Marlin/src/feature/power_loss_recovery.h b/Marlin/src/feature/power_loss_recovery.h index d58285e56..34322243f 100644 --- a/Marlin/src/feature/power_loss_recovery.h +++ b/Marlin/src/feature/power_loss_recovery.h @@ -26,12 +26,16 @@ */ #include "../sd/cardreader.h" -#include "../inc/MarlinConfigPre.h" +#include "../inc/MarlinConfig.h" #if ENABLED(MIXING_EXTRUDER) #include "../feature/mixing.h" #endif +#if !defined(POWER_LOSS_STATE) && PIN_EXISTS(POWER_LOSS) + #define POWER_LOSS_STATE HIGH +#endif + //#define DEBUG_POWER_LOSS_RECOVERY //#define SAVE_EACH_CMD_MODE //#define SAVE_INFO_INTERVAL_MS 0 @@ -110,6 +114,20 @@ class PrintJobRecovery { static void init(); + static inline void setup() { + #if PIN_EXISTS(POWER_LOSS) + #if ENABLED(POWER_LOSS_PULL) + #if POWER_LOSS_STATE == LOW + SET_INPUT_PULLUP(POWER_LOSS_PIN); + #else + SET_INPUT_PULLDOWN(POWER_LOSS_PIN); + #endif + #else + SET_INPUT(POWER_LOSS_PIN); + #endif + #endif + } + static bool enabled; static void enable(const bool onoff); static void changed(); diff --git a/Marlin/src/feature/prusa_MMU2/mmu2.cpp b/Marlin/src/feature/prusa_MMU2/mmu2.cpp index 3450e98b3..12f84af3e 100644 --- a/Marlin/src/feature/prusa_MMU2/mmu2.cpp +++ b/Marlin/src/feature/prusa_MMU2/mmu2.cpp @@ -42,6 +42,10 @@ MMU2 mmu2; #include "../../feature/host_actions.h" #endif +#if ENABLED(EXTENSIBLE_UI) + #include "../../lcd/extensible_ui/ui_api.h" +#endif + #define DEBUG_OUT ENABLED(MMU2_DEBUG) #include "../../core/debug_out.h" @@ -711,6 +715,9 @@ void MMU2::filament_runout() { #if ENABLED(HOST_PROMPT_SUPPORT) host_prompt_do(PROMPT_USER_CONTINUE, PSTR("MMU2 Eject Recover"), PSTR("Continue")); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::onStatusChanged(PSTR("MMU2 Eject Recover")); + #endif while (wait_for_user) idle(); BUZZ(200, 404); BUZZ(200, 404); diff --git a/Marlin/src/feature/runout.h b/Marlin/src/feature/runout.h index 5c4b4d568..faf2d8b11 100644 --- a/Marlin/src/feature/runout.h +++ b/Marlin/src/feature/runout.h @@ -249,6 +249,8 @@ class FilamentSensorBase { && (dual_x_carriage_mode == DXC_DUPLICATION_MODE || dual_x_carriage_mode == DXC_MIRRORED_MODE) #elif ENABLED(MULTI_NOZZLE_DUPLICATION) && extruder_duplication_enabled + #else + && false #endif #endif ) return runout_states; // Any extruder diff --git a/Marlin/src/gcode/calibrate/G33.cpp b/Marlin/src/gcode/calibrate/G33.cpp index 397f5d2f7..5eaadeb77 100644 --- a/Marlin/src/gcode/calibrate/G33.cpp +++ b/Marlin/src/gcode/calibrate/G33.cpp @@ -445,7 +445,7 @@ void GcodeSuite::G33() { _tower_results = (_4p_calibration && towers_set) || probe_points >= 3, _opposite_results = (_4p_calibration && !towers_set) || probe_points >= 3, _endstop_results = probe_points != 1 && probe_points != -1 && probe_points != 0, - _angle_results = probe_points >= 3 && towers_set; + _angle_results = probe_points >= 3 && towers_set; static const char save_message[] PROGMEM = "Save with M500 and/or copy to Configuration.h"; int8_t iterations = 0; float test_precision, diff --git a/Marlin/src/gcode/calibrate/G34_M422.cpp b/Marlin/src/gcode/calibrate/G34_M422.cpp index 101b3cc00..4b38eff32 100644 --- a/Marlin/src/gcode/calibrate/G34_M422.cpp +++ b/Marlin/src/gcode/calibrate/G34_M422.cpp @@ -284,7 +284,7 @@ void GcodeSuite::G34() { // Home Z after the alignment procedure process_subcommands_now_P(PSTR("G28 Z")); - } while(0); + }while(0); if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("<<< G34"); } diff --git a/Marlin/src/gcode/config/M43.cpp b/Marlin/src/gcode/config/M43.cpp index 8909397b3..3f3c48150 100644 --- a/Marlin/src/gcode/config/M43.cpp +++ b/Marlin/src/gcode/config/M43.cpp @@ -42,6 +42,10 @@ #include "../../feature/host_actions.h" #endif +#if ENABLED(EXTENSIBLE_UI) + #include "../../lcd/extensible_ui/ui_api.h" +#endif + #ifndef GET_PIN_MAP_PIN_M43 #define GET_PIN_MAP_PIN_M43(Q) GET_PIN_MAP_PIN(Q) #endif @@ -329,6 +333,9 @@ void GcodeSuite::M43() { #if ENABLED(HOST_PROMPT_SUPPORT) host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M43 Wait Called"), PSTR("Continue")); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::onStatusChanged(PSTR("M43 Wait Called")); + #endif #endif for (;;) { diff --git a/Marlin/src/gcode/control/M17_M18_M84.cpp b/Marlin/src/gcode/control/M17_M18_M84.cpp index 6706cee00..de6eab4f7 100644 --- a/Marlin/src/gcode/control/M17_M18_M84.cpp +++ b/Marlin/src/gcode/control/M17_M18_M84.cpp @@ -30,11 +30,21 @@ #endif /** - * M17: Enable power on all stepper motors + * M17: Enable stepper motors */ void GcodeSuite::M17() { - LCD_MESSAGEPGM(MSG_NO_MOVE); - enable_all_steppers(); + if (parser.seen("XYZE")) { + if (parser.seen('X')) enable_X(); + if (parser.seen('Y')) enable_Y(); + if (parser.seen('Z')) enable_Z(); + #if HAS_E_STEPPER_ENABLE + if (parser.seen('E')) enable_e_steppers(); + #endif + } + else { + LCD_MESSAGEPGM(MSG_NO_MOVE); + enable_all_steppers(); + } } /** @@ -45,20 +55,17 @@ void GcodeSuite::M18_M84() { stepper_inactive_time = parser.value_millis_from_seconds(); } else { - bool all_axis = !(parser.seen('X') || parser.seen('Y') || parser.seen('Z') || parser.seen('E')); - if (all_axis) { - planner.finish_and_disable(); - } - else { + if (parser.seen("XYZE")) { planner.synchronize(); if (parser.seen('X')) disable_X(); if (parser.seen('Y')) disable_Y(); if (parser.seen('Z')) disable_Z(); - // Only disable on boards that have separate ENABLE_PINS or another method for disabling the driver - #if (E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN) || AXIS_DRIVER_TYPE_E0(TMC2660) || AXIS_DRIVER_TYPE_E1(TMC2660) || AXIS_DRIVER_TYPE_E2(TMC2660) || AXIS_DRIVER_TYPE_E3(TMC2660) || AXIS_DRIVER_TYPE_E4(TMC2660) || AXIS_DRIVER_TYPE_E5(TMC2660) + #if HAS_E_STEPPER_ENABLE if (parser.seen('E')) disable_e_steppers(); #endif } + else + planner.finish_and_disable(); #if HAS_LCD_MENU && ENABLED(AUTO_BED_LEVELING_UBL) if (ubl.lcd_map_control) { diff --git a/Marlin/src/gcode/eeprom/M500-M504.cpp b/Marlin/src/gcode/eeprom/M500-M504.cpp index 8a016e13e..79bacf066 100644 --- a/Marlin/src/gcode/eeprom/M500-M504.cpp +++ b/Marlin/src/gcode/eeprom/M500-M504.cpp @@ -52,7 +52,7 @@ void GcodeSuite::M502() { * M503: print settings currently in memory */ void GcodeSuite::M503() { - (void)settings.report(parser.boolval('S', true)); + (void)settings.report(!parser.boolval('S', true)); } #endif // !DISABLE_M503 diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp index cbad59eac..91282d0ab 100644 --- a/Marlin/src/gcode/gcode.cpp +++ b/Marlin/src/gcode/gcode.cpp @@ -342,6 +342,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) { case 12: M12(); break; // M12: Synchronize and optionally force a CLC set #endif + #if ENABLED(EXPECTED_PRINTER_CHECK) + case 16: M16(); break; // M16: Expected printer check + #endif + case 17: M17(); break; // M17: Enable all stepper motors #if ENABLED(SDSUPPORT) diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index 9a90c5df4..c12d5bde8 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -83,6 +83,7 @@ * M8 - Turn flood coolant ON. (Requires COOLANT_CONTROL) * M9 - Turn coolant OFF. (Requires COOLANT_CONTROL) * M12 - Set up closed loop control system. (Requires EXTERNAL_CLOSED_LOOP_CONTROLLER) + * M16 - Expected printer check. (Requires EXPECTED_PRINTER_CHECK) * M17 - Enable/Power all stepper motors * M18 - Disable all stepper motors; same as M84 * M20 - List SD card. (Requires SDSUPPORT) @@ -472,6 +473,10 @@ private: static void M12(); #endif + #if ENABLED(EXPECTED_PRINTER_CHECK) + static void M16(); + #endif + static void M17(); static void M18_M84(); diff --git a/Marlin/src/gcode/host/M16.cpp b/Marlin/src/gcode/host/M16.cpp new file mode 100644 index 000000000..94ae79b26 --- /dev/null +++ b/Marlin/src/gcode/host/M16.cpp @@ -0,0 +1,40 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "../../inc/MarlinConfigPre.h" + +#if ENABLED(EXPECTED_PRINTER_CHECK) + +#include "../gcode.h" +#include "../../Marlin.h" + +/** + * M16: Expected Printer Check + */ +void GcodeSuite::M16() { + + if (strcmp_P(parser.string_arg, PSTR(MACHINE_NAME))) + kill(PSTR(MSG_EXPECTED_PRINTER)); + +} + +#endif diff --git a/Marlin/src/gcode/lcd/M0_M1.cpp b/Marlin/src/gcode/lcd/M0_M1.cpp index 3bbf32991..67f634ce8 100644 --- a/Marlin/src/gcode/lcd/M0_M1.cpp +++ b/Marlin/src/gcode/lcd/M0_M1.cpp @@ -97,6 +97,9 @@ void GcodeSuite::M0_M1() { #if ENABLED(HOST_PROMPT_SUPPORT) host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M0/1 Break Called"), PSTR("Continue")); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::onStatusChanged(PSTR("M0/1 Break Called")); + #endif if (ms > 0) { ms += millis(); // wait until this time for a click diff --git a/Marlin/src/gcode/parser.cpp b/Marlin/src/gcode/parser.cpp index de87103ff..76a63a21a 100644 --- a/Marlin/src/gcode/parser.cpp +++ b/Marlin/src/gcode/parser.cpp @@ -225,6 +225,9 @@ void GCodeParser::parse(char *p) { case 810: case 811: case 812: case 813: case 814: case 815: case 816: case 817: case 818: case 819: #endif + #if ENABLED(EXPECTED_PRINTER_CHECK) + case 16: + #endif case 23: case 28: case 30: case 117: case 118: case 928: string_arg = p; return; default: break; } diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 9d6706b99..7b9ee0ab3 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -30,9 +30,9 @@ #define DOGLCD #define IS_ULTIPANEL - #define DEFAULT_LCD_CONTRAST 90 - #define LCD_CONTRAST_MIN 60 + #define LCD_CONTRAST_MIN 60 #define LCD_CONTRAST_MAX 140 + #define LCD_CONTRAST_INIT 90 #elif ENABLED(ZONESTAR_LCD) @@ -65,23 +65,23 @@ #if ENABLED(miniVIKI) #define LCD_CONTRAST_MIN 75 #define LCD_CONTRAST_MAX 115 - #define DEFAULT_LCD_CONTRAST 95 + #define LCD_CONTRAST_INIT 95 #define U8GLIB_ST7565_64128N #elif ENABLED(VIKI2) #define LCD_CONTRAST_MIN 0 #define LCD_CONTRAST_MAX 255 - #define DEFAULT_LCD_CONTRAST 140 + #define LCD_CONTRAST_INIT 140 #define U8GLIB_ST7565_64128N #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) #define LCD_CONTRAST_MIN 90 #define LCD_CONTRAST_MAX 130 - #define DEFAULT_LCD_CONTRAST 110 + #define LCD_CONTRAST_INIT 110 #define U8GLIB_LM6059_AF #define SD_DETECT_INVERTED #elif ENABLED(AZSMZ_12864) #define LCD_CONTRAST_MIN 120 #define LCD_CONTRAST_MAX 255 - #define DEFAULT_LCD_CONTRAST 190 + #define LCD_CONTRAST_INIT 190 #define U8GLIB_ST7565_64128N #endif @@ -128,17 +128,17 @@ #elif ENABLED(MKS_MINI_12864) #define MINIPANEL - #define DEFAULT_LCD_CONTRAST 150 - #define LCD_CONTRAST_MAX 255 + #define LCD_CONTRAST_MAX 255 + #define LCD_CONTRAST_INIT 150 #elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) #define FYSETC_MINI_12864 #define DOGLCD #define IS_ULTIPANEL - #define LCD_CONTRAST_MIN 0 - #define LCD_CONTRAST_MAX 255 - #define DEFAULT_LCD_CONTRAST 220 + #define LCD_CONTRAST_MIN 0 + #define LCD_CONTRAST_MAX 255 + #define LCD_CONTRAST_INIT 220 #define LED_COLORS_REDUCE_GREEN #if HAS_POWER_SWITCH && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) #define LED_BACKLIGHT_TIMEOUT 10000 @@ -166,9 +166,9 @@ #define IS_ULTIPANEL #define U8GLIB_SSD1309 #define LCD_RESET_PIN LCD_PINS_D6 // This controller need a reset pin - #define LCD_CONTRAST_MIN 0 - #define LCD_CONTRAST_MAX 254 - #define DEFAULT_LCD_CONTRAST 127 + #define LCD_CONTRAST_MIN 0 + #define LCD_CONTRAST_MAX 254 + #define LCD_CONTRAST_INIT 127 #define ENCODER_PULSES_PER_STEP 2 #define ENCODER_STEPS_PER_MENU_ITEM 2 @@ -190,8 +190,8 @@ #if ENABLED(MAKRPANEL) #define U8GLIB_ST7565_64128N #endif - #ifndef DEFAULT_LCD_CONTRAST - #define DEFAULT_LCD_CONTRAST 17 + #ifndef LCD_CONTRAST_INIT + #define LCD_CONTRAST_INIT 17 #endif #endif @@ -368,7 +368,7 @@ #endif // Extensible UI serial touch screens. (See src/lcd/extensible_ui) -#if EITHER(MALYAN_LCD, DGUS_LCD) +#if ANY(MALYAN_LCD, DGUS_LCD, LULZBOT_TOUCH_UI) #define IS_EXTUI #define EXTENSIBLE_UI #endif @@ -381,22 +381,6 @@ #define HAS_LCD_MENU (ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS)) #define HAS_ADC_BUTTONS ENABLED(ADC_KEYPAD) -/** - * Default LCD contrast for Graphical LCD displays - */ -#define HAS_LCD_CONTRAST (HAS_GRAPHICAL_LCD && defined(DEFAULT_LCD_CONTRAST)) -#if HAS_LCD_CONTRAST - #ifndef LCD_CONTRAST_MIN - #define LCD_CONTRAST_MIN 0 - #endif - #ifndef LCD_CONTRAST_MAX - #define LCD_CONTRAST_MAX 63 - #endif - #ifndef DEFAULT_LCD_CONTRAST - #define DEFAULT_LCD_CONTRAST 32 - #endif -#endif - /** * Extruders have some combination of stepper motors and hotends * so we separate these concepts into the defines: @@ -594,32 +578,6 @@ #define INVERT_E_DIR false #endif -#if ENABLED(HOST_ACTION_COMMANDS) - #ifndef ACTION_ON_PAUSE - #define ACTION_ON_PAUSE "pause" - #endif - #ifndef ACTION_ON_RESUME - #define ACTION_ON_RESUME "resume" - #endif - #ifndef ACTION_ON_PAUSED - #define ACTION_ON_PAUSED "paused" - #endif - #ifndef ACTION_ON_RESUMED - #define ACTION_ON_RESUMED "resumed" - #endif - #ifndef ACTION_ON_CANCEL - #define ACTION_ON_CANCEL "cancel" - #endif - #if ENABLED(G29_RETRY_AND_RECOVER) - #ifndef ACTION_ON_G29_RECOVER - #define ACTION_ON_G29_RECOVER "probe_rewipe" - #endif - #ifndef ACTION_ON_G29_FAILURE - #define ACTION_ON_G29_FAILURE "probe_failed" - #endif - #endif -#endif - #if ENABLED(SLIM_LCD_MENUS) #define BOOT_MARLIN_LOGO_SMALL #endif diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h index 168bc9cc1..bb9ca6be3 100644 --- a/Marlin/src/inc/Conditionals_adv.h +++ b/Marlin/src/inc/Conditionals_adv.h @@ -99,3 +99,6 @@ #define LED_USER_PRESET_BRIGHTNESS 255 #endif #endif + +// Extensible UI pin mapping for RepRapDiscount +#define TOUCH_UI_ULTIPANEL ENABLED(LULZBOT_TOUCH_UI) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP) diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index c6a2efbd5..662ab8004 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -246,6 +246,22 @@ #define MAX_AUTORETRACT 99 #endif +/** + * Default LCD contrast for Graphical LCD displays + */ +#define HAS_LCD_CONTRAST defined(LCD_CONTRAST_INIT) +#if HAS_LCD_CONTRAST + #ifndef DEFAULT_LCD_CONTRAST + #define DEFAULT_LCD_CONTRAST LCD_CONTRAST_INIT + #endif + #ifndef LCD_CONTRAST_MIN + #define LCD_CONTRAST_MIN 0 + #endif + #ifndef LCD_CONTRAST_MAX + #define LCD_CONTRAST_MAX MAX(63, LCD_CONTRAST_INIT) + #endif +#endif + /** * Override here because this is set in Configuration_adv.h */ @@ -927,6 +943,11 @@ #endif #endif +#define HAS_E_STEPPER_ENABLE (HAS_E_DRIVER(TMC2660) \ + || ( E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != X_ENABLE_PIN \ + && E0_ENABLE_PIN != Y_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN ) \ +) + // Endstops and bed probe #define _HAS_STOP(A,M) (PIN_EXISTS(A##_##M) && !IS_X2_ENDSTOP(A,M) && !IS_Y2_ENDSTOP(A,M) && !IS_Z2_OR_PROBE(A,M)) #define HAS_X_MIN _HAS_STOP(X,MIN) @@ -996,7 +1017,21 @@ #define HAS_AUTO_FAN_4 (HOTENDS > 4 && PIN_EXISTS(E4_AUTO_FAN)) #define HAS_AUTO_FAN_5 (HOTENDS > 5 && PIN_EXISTS(E5_AUTO_FAN)) #define HAS_AUTO_CHAMBER_FAN (HAS_TEMP_CHAMBER && PIN_EXISTS(CHAMBER_AUTO_FAN)) + #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_FAN_4 || HAS_AUTO_FAN_5 || HAS_AUTO_CHAMBER_FAN) +#if HAS_AUTO_FAN + #define AUTO_CHAMBER_IS_0 (CHAMBER_AUTO_FAN_PIN == E0_AUTO_FAN_PIN) + #define AUTO_CHAMBER_IS_1 (CHAMBER_AUTO_FAN_PIN == E1_AUTO_FAN_PIN) + #define AUTO_CHAMBER_IS_2 (CHAMBER_AUTO_FAN_PIN == E2_AUTO_FAN_PIN) + #define AUTO_CHAMBER_IS_3 (CHAMBER_AUTO_FAN_PIN == E3_AUTO_FAN_PIN) + #define AUTO_CHAMBER_IS_4 (CHAMBER_AUTO_FAN_PIN == E4_AUTO_FAN_PIN) + #define AUTO_CHAMBER_IS_5 (CHAMBER_AUTO_FAN_PIN == E5_AUTO_FAN_PIN) + #define AUTO_CHAMBER_IS_E (AUTO_CHAMBER_IS_0 || AUTO_CHAMBER_IS_1 || AUTO_CHAMBER_IS_2 || AUTO_CHAMBER_IS_3 || AUTO_CHAMBER_IS_4 || AUTO_CHAMBER_IS_5) +#endif + +#if !HAS_AUTO_CHAMBER_FAN || AUTO_CHAMBER_IS_E + #undef AUTO_POWER_CHAMBER_FAN +#endif // Other fans #define HAS_FAN0 (PIN_EXISTS(FAN)) @@ -1029,7 +1064,8 @@ #define HAS_KILL (PIN_EXISTS(KILL)) #define HAS_SUICIDE (PIN_EXISTS(SUICIDE)) #define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH)) -#define HAS_BUZZER (PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER) || ENABLED(PCA9632_BUZZER)) +#define HAS_BUZZER (PIN_EXISTS(BEEPER) || EITHER(LCD_USE_I2C_BUZZER, PCA9632_BUZZER)) +#define USE_BEEPER (HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER, PCA9632_BUZZER)) #define HAS_CASE_LIGHT (PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE)) // Digital control @@ -1551,7 +1587,7 @@ #ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 #endif -#else +#elif HAS_BUZZER #ifndef LCD_FEEDBACK_FREQUENCY_HZ #define LCD_FEEDBACK_FREQUENCY_HZ 5000 #endif diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index e6bd1beb1..c1c75f042 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -1892,6 +1892,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS + ENABLED(OVERLORD_OLED) \ + ENABLED(DGUS_LCD) \ + ENABLED(MALYAN_LCD) \ + + ENABLED(LULZBOT_TOUCH_UI) \ + ENABLED(FSMC_GRAPHICAL_TFT) #error "Please select no more than one LCD controller option." #endif diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h index 95ffad59b..c47a40b76 100644 --- a/Marlin/src/inc/Version.h +++ b/Marlin/src/inc/Version.h @@ -51,7 +51,7 @@ * here we define this default string as the date where the latest release * version was tagged. */ - #define STRING_DISTRIBUTION_DATE "2019-08-08" + #define STRING_DISTRIBUTION_DATE "2019-08-21" /** * Required minimum Configuration.h and Configuration_adv.h file versions. diff --git a/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp b/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp index 08cc468d2..781e76d37 100644 --- a/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp +++ b/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp @@ -877,7 +877,7 @@ static int pf_bsearch_cb_comp_hd4map_pgm(void *userdata, size_t idx, void * data return hd44780_charmap_compare(&localval, (hd44780_charmap_t *)data_pin); } -void lcd_moveto(const uint8_t col, const uint8_t row) { lcd.setCursor(col, row); } +void lcd_moveto(const lcd_uint_t col, const lcd_uint_t row) { lcd.setCursor(col, row); } void lcd_put_int(const int i) { lcd.print(i); } diff --git a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp index b40aab6e0..47666857b 100644 --- a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp +++ b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp @@ -269,7 +269,7 @@ void MarlinUI::set_custom_characters(const HD44780CharSet screen_charset/*=CHARS #endif // LCD_PROGRESS_BAR - #if ENABLED(SDSUPPORT) + #if ENABLED(SDSUPPORT) && HAS_LCD_MENU // CHARSET_MENU const static PROGMEM byte refresh[8] = { @@ -319,7 +319,7 @@ void MarlinUI::set_custom_characters(const HD44780CharSet screen_charset/*=CHARS #endif { createChar_P(LCD_STR_UPLEVEL[0], uplevel); - #if ENABLED(SDSUPPORT) + #if ENABLED(SDSUPPORT) && HAS_LCD_MENU // SD Card sub-menu special characters createChar_P(LCD_STR_REFRESH[0], refresh); createChar_P(LCD_STR_FOLDER[0], folder); @@ -360,23 +360,48 @@ void MarlinUI::init_lcd() { lcd.clear(); } +bool MarlinUI::detected() { + return true + #if EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008) && defined(DETECT_DEVICE) + && lcd.LcdDetected() == 1 + #endif + ; +} + +#if HAS_SLOW_BUTTONS + uint8_t MarlinUI::read_slow_buttons() { + #if ENABLED(LCD_I2C_TYPE_MCP23017) + // Reading these buttons this is likely to be too slow to call inside interrupt context + // so they are called during normal lcd_update + uint8_t slow_bits = lcd.readButtons() + #if !BUTTON_EXISTS(ENC) + << B_I2C_BTN_OFFSET + #endif + ; + #if ENABLED(LCD_I2C_VIKI) + if ((slow_bits & (B_MI | B_RI)) && PENDING(millis(), next_button_update_ms)) // LCD clicked + slow_bits &= ~(B_MI | B_RI); // Disable LCD clicked buttons if screen is updated + #endif // LCD_I2C_VIKI + return slow_bits; + #endif // LCD_I2C_TYPE_MCP23017 + } +#endif + void MarlinUI::clear_lcd() { lcd.clear(); } #if ENABLED(SHOW_BOOTSCREEN) - void lcd_erase_line(const int16_t line) { + void lcd_erase_line(const lcd_uint_t line) { lcd_moveto(0, line); for (uint8_t i = LCD_WIDTH + 1; --i;) lcd_put_wchar(' '); } // Scroll the PSTR 'text' in a 'len' wide field for 'time' milliseconds at position col,line - void lcd_scroll(const uint8_t col, const uint8_t line, PGM_P const text, const uint8_t len, const int16_t time) { + void lcd_scroll(const lcd_uint_t col, const lcd_uint_t line, PGM_P const text, const uint8_t len, const int16_t time) { uint8_t slen = utf8_strlen_P(text); if (slen < len) { - // Fits into, - lcd_moveto(col, line); - lcd_put_u8str_max_P(text, len); + lcd_put_u8str_max_P(col, line, text, len); for (; slen < len; ++slen) lcd_put_wchar(' '); safe_delay(time); } @@ -385,11 +410,8 @@ void MarlinUI::clear_lcd() { lcd.clear(); } int dly = time / _MAX(slen, 1); for (uint8_t i = 0; i <= slen; i++) { - // Go to the correct place - lcd_moveto(col, line); - - // Print the text - lcd_put_u8str_max_P(p, len); + // Print the text at the correct place + lcd_put_u8str_max_P(col, line, p, len); // Fill with spaces for (uint8_t ix = slen - i; ix < len; ++ix) lcd_put_wchar(' '); @@ -406,9 +428,9 @@ void MarlinUI::clear_lcd() { lcd.clear(); } static void logo_lines(PGM_P const extra) { int16_t indent = (LCD_WIDTH - 8 - utf8_strlen_P(extra)) / 2; - lcd_moveto(indent, 0); lcd_put_wchar('\x00'); lcd_put_u8str_P(PSTR( "------" )); lcd_put_wchar('\x01'); - lcd_moveto(indent, 1); lcd_put_u8str_P(PSTR("|Marlin|")); lcd_put_u8str_P(extra); - lcd_moveto(indent, 2); lcd_put_wchar('\x02'); lcd_put_u8str_P(PSTR( "------" )); lcd_put_wchar('\x03'); + lcd_put_wchar(indent, 0, '\x00'); lcd_put_u8str_P(PSTR( "------" )); lcd_put_wchar('\x01'); + lcd_put_u8str_P(indent, 1, PSTR("|Marlin|")); lcd_put_u8str_P(extra); + lcd_put_wchar(indent, 2, '\x02'); lcd_put_u8str_P(PSTR( "------" )); lcd_put_wchar('\x03'); } void MarlinUI::show_bootscreen() { @@ -420,8 +442,7 @@ void MarlinUI::clear_lcd() { lcd.clear(); } #define CENTER_OR_SCROLL(STRING,DELAY) \ lcd_erase_line(3); \ if (utf8_strlen(STRING) <= LCD_WIDTH) { \ - lcd_moveto((LCD_WIDTH - utf8_strlen_P(PSTR(STRING))) / 2, 3); \ - lcd_put_u8str_P(PSTR(STRING)); \ + lcd_put_u8str_P((LCD_WIDTH - utf8_strlen_P(PSTR(STRING))) / 2, 3, PSTR(STRING)); \ safe_delay(DELAY); \ } \ else { \ @@ -491,16 +512,12 @@ void MarlinUI::clear_lcd() { lcd.clear(); } #endif // SHOW_BOOTSCREEN void MarlinUI::draw_kill_screen() { - lcd_moveto(0, 0); - lcd_put_u8str(status_message); - #if LCD_HEIGHT < 4 - lcd_moveto(0, 2); - #else - lcd_moveto(0, 2); - lcd_put_u8str_P(PSTR(MSG_HALTED)); - lcd_moveto(0, 3); + lcd_put_u8str(0, 0, status_message); + lcd_uint_t y = 2; + #if LCD_HEIGHT >= 4 + lcd_put_u8str_P(0, y++, PSTR(MSG_HALTED)); #endif - lcd_put_u8str_P(PSTR(MSG_PLEASE_RESET)); + lcd_put_u8str_P(0, y, PSTR(MSG_PLEASE_RESET)); } // @@ -859,8 +876,7 @@ void MarlinUI::draw_status_screen() { #if LCD_HEIGHT > 3 - lcd_moveto(0, 2); - lcd_put_wchar(LCD_STR_FEEDRATE[0]); + lcd_put_wchar(0, 2, LCD_STR_FEEDRATE[0]); lcd_put_u8str(i16tostr3(feedrate_percentage)); lcd_put_wchar('%'); @@ -868,8 +884,7 @@ void MarlinUI::draw_status_screen() { duration_t elapsed = print_job_timer.duration(); const uint8_t len = elapsed.toDigital(buffer), timepos = LCD_WIDTH - len - 1; - lcd_moveto(timepos, 2); - lcd_put_wchar(LCD_STR_CLOCK[0]); + lcd_put_wchar(timepos, 2, LCD_STR_CLOCK[0]); lcd_put_u8str(buffer); #if LCD_WIDTH >= 20 @@ -918,8 +933,7 @@ void MarlinUI::draw_status_screen() { _draw_axis_value(Z_AXIS, ftostr52sp(LOGICAL_Z_POSITION(current_position[Z_AXIS])), blink); #if HAS_LEVELING && (HOTENDS > 1 || !HAS_HEATED_BED) - lcd_moveto(LCD_WIDTH - 1, 0); - lcd_put_wchar(planner.leveling_active || blink ? '_' : ' '); + lcd_put_wchar(LCD_WIDTH - 1, 0, planner.leveling_active || blink ? '_' : ' '); #endif // ========== Line 2 ========== @@ -934,8 +948,7 @@ void MarlinUI::draw_status_screen() { _draw_bed_status(blink); #endif - lcd_moveto(LCD_WIDTH - 9, 1); - lcd_put_wchar(LCD_STR_FEEDRATE[0]); + lcd_put_wchar(LCD_WIDTH - 9, 1, LCD_STR_FEEDRATE[0]); lcd_put_u8str(i16tostr3(feedrate_percentage)); lcd_put_wchar('%'); @@ -1006,8 +1019,7 @@ void MarlinUI::draw_status_screen() { void draw_menu_item(const bool sel, const uint8_t row, PGM_P pstr, const char pre_char, const char post_char) { uint8_t n = LCD_WIDTH - 2; - lcd_moveto(0, row); - lcd_put_wchar(sel ? pre_char : ' '); + lcd_put_wchar(0, row, sel ? pre_char : ' '); n -= lcd_put_u8str_max_P(pstr, n); for (; n; --n) lcd_put_wchar(' '); lcd_put_wchar(post_char); @@ -1015,8 +1027,7 @@ void MarlinUI::draw_status_screen() { void _draw_menu_item_edit(const bool sel, const uint8_t row, PGM_P pstr, const char* const data, const bool pgm) { uint8_t n = LCD_WIDTH - 2 - (pgm ? utf8_strlen_P(data) : utf8_strlen(data)); - lcd_moveto(0, row); - lcd_put_wchar(sel ? LCD_STR_ARROW_RIGHT[0] : ' '); + lcd_put_wchar(0, row, sel ? LCD_STR_ARROW_RIGHT[0] : ' '); n -= lcd_put_u8str_max_P(pstr, n); lcd_put_wchar(':'); for (; n; --n) lcd_put_wchar(' '); @@ -1026,14 +1037,12 @@ void MarlinUI::draw_status_screen() { void draw_edit_screen(PGM_P const pstr, const char* const value/*=nullptr*/) { ui.encoder_direction_normal(); - lcd_moveto(0, 1); - lcd_put_u8str_P(pstr); + lcd_put_u8str_P(0, 1, pstr); if (value != nullptr) { lcd_put_wchar(':'); int len = utf8_strlen(value); - const uint8_t valrow = (utf8_strlen_P(pstr) + 1 + len + 1) > (LCD_WIDTH - 2) ? 2 : 1; // Value on the next row if it won't fit - lcd_moveto((LCD_WIDTH - 1) - (len + 1), valrow); // Right-justified, padded by spaces - lcd_put_wchar(' '); // Overwrite char if value gets shorter + const lcd_uint_t valrow = (utf8_strlen_P(pstr) + 1 + len + 1) > (LCD_WIDTH - 2) ? 2 : 1; // Value on the next row if it won't fit + lcd_put_wchar((LCD_WIDTH - 1) - (len + 1), valrow, ' '); // Right-justified, padded, add a leading space lcd_put_u8str(value); } } @@ -1051,8 +1060,7 @@ void MarlinUI::draw_status_screen() { void draw_sd_menu_item(const bool sel, const uint8_t row, PGM_P const pstr, CardReader &theCard, const bool isDir) { UNUSED(pstr); - lcd_moveto(0, row); - lcd_put_wchar(sel ? LCD_STR_ARROW_RIGHT[0] : ' '); + lcd_put_wchar(0, row, sel ? LCD_STR_ARROW_RIGHT[0] : ' '); constexpr uint8_t maxlen = LCD_WIDTH - 2; uint8_t n = maxlen - lcd_put_u8str_max(ui.scrolled_filename(theCard, maxlen, row, sel), maxlen); for (; n; --n) lcd_put_wchar(' '); @@ -1063,7 +1071,7 @@ void MarlinUI::draw_status_screen() { #if ENABLED(LCD_HAS_STATUS_INDICATORS) - static void MarlinUI::update_indicators() { + void MarlinUI::update_indicators() { // Set the LEDS - referred to as backlights by the LiquidTWI2 library static uint8_t ledsprev = 0; uint8_t leds = 0; @@ -1144,9 +1152,9 @@ void MarlinUI::draw_status_screen() { } custom_char; typedef struct { - uint8_t column, row, - x_pixel_offset, y_pixel_offset, - x_pixel_mask; + lcd_uint_t column, row, + x_pixel_offset, y_pixel_offset; + uint8_t x_pixel_mask; } coordinate; void add_edges_to_custom_char(custom_char &custom, const coordinate &ul, const coordinate &lr, const coordinate &brc, const uint8_t cell_location); @@ -1174,22 +1182,21 @@ void MarlinUI::draw_status_screen() { return ret_val; } - inline coordinate pixel_location(const uint8_t x, const uint8_t y) { return pixel_location((int16_t)x, (int16_t)y); } + inline coordinate pixel_location(const lcd_uint_t x, const lcd_uint_t y) { return pixel_location((int16_t)x, (int16_t)y); } - void prep_and_put_map_char(custom_char &chrdata, const coordinate &ul, const coordinate &lr, const coordinate &brc, const uint8_t cl, const char c, const uint8_t x, const uint8_t y) { + void prep_and_put_map_char(custom_char &chrdata, const coordinate &ul, const coordinate &lr, const coordinate &brc, const uint8_t cl, const char c, const lcd_uint_t x, const lcd_uint_t y) { add_edges_to_custom_char(chrdata, ul, lr, brc, cl); lcd.createChar(c, (uint8_t*)&chrdata); - lcd_moveto(x, y); - lcd_put_wchar(c); + lcd_put_wchar(x, y, c); } - void MarlinUI::ubl_plot(const uint8_t x, const uint8_t inverted_y) { + void MarlinUI::ubl_plot(const uint8_t x_plot, const uint8_t y_plot) { #if LCD_WIDTH >= 20 #define _LCD_W_POS 12 #define _PLOT_X 1 #define _MAP_X 3 - #define _LABEL(C,X,Y) lcd_moveto(X, Y); lcd_put_u8str(C) + #define _LABEL(C,X,Y) lcd_put_u8str(X, Y, C) #define _XLABEL(X,Y) _LABEL("X:",X,Y) #define _YLABEL(X,Y) _LABEL("Y:",X,Y) #define _ZLABEL(X,Y) _LABEL("Z:",X,Y) @@ -1197,7 +1204,7 @@ void MarlinUI::draw_status_screen() { #define _LCD_W_POS 8 #define _PLOT_X 0 #define _MAP_X 1 - #define _LABEL(X,Y,C) lcd_moveto(X, Y); lcd_put_wchar(C) + #define _LABEL(X,Y,C) lcd_put_wchar(X, Y, C) #define _XLABEL(X,Y) _LABEL('X',X,Y) #define _YLABEL(X,Y) _LABEL('Y',X,Y) #define _ZLABEL(X,Y) _LABEL('Z',X,Y) @@ -1209,10 +1216,10 @@ void MarlinUI::draw_status_screen() { * Show X and Y positions */ _XLABEL(_PLOT_X, 0); - lcd_put_u8str(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x])))); + lcd_put_u8str(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot])))); _YLABEL(_LCD_W_POS, 0); - lcd_put_u8str(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[inverted_y])))); + lcd_put_u8str(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot])))); lcd_moveto(_PLOT_X, 0); @@ -1220,13 +1227,13 @@ void MarlinUI::draw_status_screen() { coordinate upper_left, lower_right, bottom_right_corner; custom_char new_char; - uint8_t i, j, k, l, m, n, n_rows, n_cols, y, - bottom_line, right_edge, - x_map_pixels, y_map_pixels, - pixels_per_x_mesh_pnt, pixels_per_y_mesh_pnt, - suppress_x_offset = 0, suppress_y_offset = 0; + uint8_t i, n, n_rows, n_cols; + lcd_uint_t j, k, l, m, bottom_line, right_edge, + x_map_pixels, y_map_pixels, + pixels_per_x_mesh_pnt, pixels_per_y_mesh_pnt, + suppress_x_offset = 0, suppress_y_offset = 0; - y = GRID_MAX_POINTS_Y - inverted_y - 1; + const uint8_t y_plot_inv = (GRID_MAX_POINTS_Y - 1) - y_plot; upper_left.column = 0; upper_left.row = 0; @@ -1261,17 +1268,13 @@ void MarlinUI::draw_status_screen() { n_cols = right_edge / (HD44780_CHAR_WIDTH) + 1; for (i = 0; i < n_cols; i++) { - lcd_moveto(i, 0); - lcd_put_wchar(CHAR_LINE_TOP); // Box Top line - lcd_moveto(i, n_rows - 1); - lcd_put_wchar(CHAR_LINE_BOT); // Box Bottom line + lcd_put_wchar(i, 0, CHAR_LINE_TOP); // Box Top line + lcd_put_wchar(i, n_rows - 1, CHAR_LINE_BOT); // Box Bottom line } for (j = 0; j < n_rows; j++) { - lcd_moveto(0, j); - lcd_put_wchar(CHAR_EDGE_L); // Box Left edge - lcd_moveto(n_cols - 1, j); - lcd_put_wchar(CHAR_EDGE_R); // Box Right edge + lcd_put_wchar(0, j, CHAR_EDGE_L); // Box Left edge + lcd_put_wchar(n_cols - 1, j, CHAR_EDGE_R); // Box Right edge } /** @@ -1281,10 +1284,8 @@ void MarlinUI::draw_status_screen() { k = pixels_per_y_mesh_pnt * (GRID_MAX_POINTS_Y) + 2; l = (HD44780_CHAR_HEIGHT) * n_rows; if (l > k && l - k >= (HD44780_CHAR_HEIGHT) / 2) { - lcd_moveto(0, n_rows - 1); // Box Left edge - lcd_put_wchar(' '); - lcd_moveto(n_cols - 1, n_rows - 1); // Box Right edge - lcd_put_wchar(' '); + lcd_put_wchar(0, n_rows - 1, ' '); // Box Left edge + lcd_put_wchar(n_cols - 1, n_rows - 1, ' '); // Box Right edge } clear_custom_char(&new_char); @@ -1310,12 +1311,12 @@ void MarlinUI::draw_status_screen() { new_char.custom_char_bits[j] = (uint8_t)_BV(i); // Char #3 is used for the box right edge lcd.createChar(CHAR_EDGE_R, (uint8_t*)&new_char); - i = x * pixels_per_x_mesh_pnt - suppress_x_offset; - j = y * pixels_per_y_mesh_pnt - suppress_y_offset; + i = x_plot * pixels_per_x_mesh_pnt - suppress_x_offset; + j = y_plot_inv * pixels_per_y_mesh_pnt - suppress_y_offset; upper_left = pixel_location(i, j); - k = (x + 1) * pixels_per_x_mesh_pnt - 1 - suppress_x_offset; - l = (y + 1) * pixels_per_y_mesh_pnt - 1 - suppress_y_offset; + k = (x_plot + 1) * pixels_per_x_mesh_pnt - 1 - suppress_x_offset; + l = (y_plot_inv + 1) * pixels_per_y_mesh_pnt - 1 - suppress_y_offset; lower_right = pixel_location(k, l); bottom_right_corner = pixel_location(x_map_pixels, y_map_pixels); @@ -1327,7 +1328,7 @@ void MarlinUI::draw_status_screen() { */ clear_custom_char(&new_char); - const uint8_t ypix = _MIN(upper_left.y_pixel_offset + pixels_per_y_mesh_pnt, HD44780_CHAR_HEIGHT); + const lcd_uint_t ypix = _MIN(upper_left.y_pixel_offset + pixels_per_y_mesh_pnt, HD44780_CHAR_HEIGHT); for (j = upper_left.y_pixel_offset; j < ypix; j++) { i = upper_left.x_pixel_mask; for (k = 0; k < pixels_per_x_mesh_pnt; k++) { @@ -1398,11 +1399,10 @@ void MarlinUI::draw_status_screen() { /** * Print plot position */ - lcd_moveto(_LCD_W_POS, 0); - lcd_put_wchar('('); - lcd_put_u8str(ui8tostr3(x)); + lcd_put_wchar(_LCD_W_POS, 0, '('); + lcd_put_u8str(ui8tostr3(x_plot)); lcd_put_wchar(','); - lcd_put_u8str(ui8tostr3(inverted_y)); + lcd_put_u8str(ui8tostr3(y_plot)); lcd_put_wchar(')'); #if LCD_HEIGHT <= 3 // 16x2 or 20x2 display @@ -1411,8 +1411,8 @@ void MarlinUI::draw_status_screen() { * Print Z values */ _ZLABEL(_LCD_W_POS, 1); - if (!isnan(ubl.z_values[x][inverted_y])) - lcd_put_u8str(ftostr43sign(ubl.z_values[x][inverted_y])); + if (!isnan(ubl.z_values[x_plot][y_plot])) + lcd_put_u8str(ftostr43sign(ubl.z_values[x_plot][y_plot])); else lcd_put_u8str_P(PSTR(" -----")); @@ -1422,16 +1422,16 @@ void MarlinUI::draw_status_screen() { * Show all values at right of screen */ _XLABEL(_LCD_W_POS, 1); - lcd_put_u8str(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x])))); + lcd_put_u8str(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot])))); _YLABEL(_LCD_W_POS, 2); - lcd_put_u8str(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[inverted_y])))); + lcd_put_u8str(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot])))); /** * Show the location value */ _ZLABEL(_LCD_W_POS, 3); - if (!isnan(ubl.z_values[x][inverted_y])) - lcd_put_u8str(ftostr43sign(ubl.z_values[x][inverted_y])); + if (!isnan(ubl.z_values[x_plot][y_plot])) + lcd_put_u8str(ftostr43sign(ubl.z_values[x_plot][y_plot])); else lcd_put_u8str_P(PSTR(" -----")); diff --git a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h index efd326c2b..6412e5986 100644 --- a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h +++ b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h @@ -40,10 +40,14 @@ #define U8G_COM_ST7920_HAL_SW_SPI u8g_com_std_sw_spi_fn #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_stm32duino_hw_spi_fn #elif defined(ARDUINO_ARCH_STM32) + uint8_t u8g_com_arduino_std_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); #define U8G_COM_HAL_SW_SPI_FN u8g_com_arduino_std_sw_spi_fn + uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); #define U8G_COM_HAL_HW_SPI_FN u8g_com_stm32duino_hw_spi_fn + uint8_t u8g_com_arduino_st7920_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); #define U8G_COM_ST7920_HAL_SW_SPI u8g_com_arduino_st7920_spi_fn - #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_stm32duino_hw_spi_fn + uint8_t u8g_com_arduino_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); + #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_arduino_st7920_hw_spi_fn #elif defined(__AVR__) uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); #define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_AVR_sw_sp_fn diff --git a/Marlin/src/lcd/dogm/dogm_Bootscreen.h b/Marlin/src/lcd/dogm/dogm_Bootscreen.h index 7f0c17512..ea8ce5e38 100644 --- a/Marlin/src/lcd/dogm/dogm_Bootscreen.h +++ b/Marlin/src/lcd/dogm/dogm_Bootscreen.h @@ -35,7 +35,7 @@ #include "../../../_Bootscreen.h" #ifndef CUSTOM_BOOTSCREEN_BMP_BYTEWIDTH - #define CUSTOM_BOOTSCREEN_BMP_BYTEWIDTH ((CUSTOM_BOOTSCREEN_BMPWIDTH + 7) / 8) + #define CUSTOM_BOOTSCREEN_BMP_BYTEWIDTH CEILING(CUSTOM_BOOTSCREEN_BMPWIDTH, 8) #endif #ifndef CUSTOM_BOOTSCREEN_BMPHEIGHT #define CUSTOM_BOOTSCREEN_BMPHEIGHT (sizeof(custom_start_bmp) / (CUSTOM_BOOTSCREEN_BMP_BYTEWIDTH)) @@ -69,6 +69,142 @@ B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 }; + #if ENABLED(BOOT_MARLIN_LOGO_ANIMATED) + + const unsigned char start_bmp1[] PROGMEM = { + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 + }; + + const unsigned char start_bmp2[] PROGMEM = { + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, + B10000011,B11001111,B00000000,B00000000,B00000000,B00000000,B00111111, + B10000111,B11111111,B10000000,B00000000,B00000000,B00000000,B00011111, + B10000110,B01111001,B10000000,B00000000,B00000000,B00000000,B00001111, + B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000111, + B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000011, + B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 + }; + + const unsigned char start_bmp3[] PROGMEM = { + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, + B10000011,B11001111,B00000000,B00000000,B00000000,B00000000,B00111111, + B10000111,B11111111,B10000000,B00000000,B00000000,B00000000,B00011111, + B10000110,B01111001,B10000000,B00000000,B00000000,B00000000,B00001111, + B10001100,B00110000,B11000111,B10000000,B00000000,B00000000,B00000111, + B10001100,B00110000,B11001111,B11000000,B00000000,B00000000,B00000011, + B10001100,B00110000,B11011100,B11100000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11011000,B01100000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11010000,B01100000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11011000,B01100000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11011100,B01100000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11001111,B01110000,B00000000,B00000000,B00000001, + B10001100,B00110000,B11000111,B01110000,B00000000,B00000000,B00000001, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 + }; + + const unsigned char start_bmp4[] PROGMEM = { + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, + B10000011,B11001111,B00000000,B00000000,B00000000,B00000000,B00111111, + B10000111,B11111111,B10000000,B00000000,B00000000,B00000000,B00011111, + B10000110,B01111001,B10000000,B00000000,B00000000,B00000000,B00001111, + B10001100,B00110000,B11000111,B10000011,B10000000,B00000000,B00000111, + B10001100,B00110000,B11001111,B11000111,B11000000,B00000000,B00000011, + B10001100,B00110000,B11011100,B11101100,B11100000,B00000000,B00000001, + B10001100,B00110000,B11011000,B01101100,B01100000,B00000000,B00000001, + B10001100,B00110000,B11010000,B01101100,B00000000,B00000000,B00000001, + B10001100,B00110000,B11011000,B01101100,B00000000,B00000000,B00000001, + B10001100,B00110000,B11011100,B01101100,B00000000,B00000000,B00000001, + B10001100,B00110000,B11001111,B01111100,B00000000,B00000000,B00000001, + B10001100,B00110000,B11000111,B01111100,B00000000,B00000000,B00000001, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 + }; + + const unsigned char start_bmp5[] PROGMEM = { + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, + B10000011,B11001111,B00000000,B00000000,B00001100,B00000000,B00111111, + B10000111,B11111111,B10000000,B00000000,B00001100,B00000000,B00011111, + B10000110,B01111001,B10000000,B00000000,B00001100,B00000000,B00001111, + B10001100,B00110000,B11000111,B10000011,B10001100,B00000000,B00000111, + B10001100,B00110000,B11001111,B11000111,B11001100,B00000000,B00000011, + B10001100,B00110000,B11011100,B11101100,B11101100,B00000000,B00000001, + B10001100,B00110000,B11011000,B01101100,B01101100,B00000000,B00000001, + B10001100,B00110000,B11010000,B01101100,B00001100,B00000000,B00000001, + B10001100,B00110000,B11011000,B01101100,B00001100,B00000000,B00000001, + B10001100,B00110000,B11011100,B01101100,B00001110,B00000000,B00000001, + B10001100,B00110000,B11001111,B01111100,B00000111,B10000000,B00000001, + B10001100,B00110000,B11000111,B01111100,B00000011,B10000000,B00000001, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 + }; + + const unsigned char start_bmp6[] PROGMEM = { + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, + B10000011,B11001111,B00000000,B00000000,B00001100,B00110000,B00111111, + B10000111,B11111111,B10000000,B00000000,B00001100,B00110000,B00011111, + B10000110,B01111001,B10000000,B00000000,B00001100,B00000000,B00001111, + B10001100,B00110000,B11000111,B10000011,B10001100,B00110000,B00000111, + B10001100,B00110000,B11001111,B11000111,B11001100,B00110000,B00000011, + B10001100,B00110000,B11011100,B11101100,B11101100,B00110000,B00000001, + B10001100,B00110000,B11011000,B01101100,B01101100,B00110000,B00000001, + B10001100,B00110000,B11010000,B01101100,B00001100,B00110000,B00000001, + B10001100,B00110000,B11011000,B01101100,B00001100,B00110000,B00000001, + B10001100,B00110000,B11011100,B01101100,B00001110,B00111000,B00000001, + B10001100,B00110000,B11001111,B01111100,B00000111,B10011100,B00000001, + B10001100,B00110000,B11000111,B01111100,B00000011,B10001100,B00000001, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 + }; + + #endif + #else #define START_BMPWIDTH 112 @@ -114,10 +250,269 @@ B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000 }; + #if ENABLED(BOOT_MARLIN_LOGO_ANIMATED) + + const unsigned char start_bmp1[] PROGMEM = { + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000, + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000 + }; + + const unsigned char start_bmp2[] PROGMEM = { + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111, + B11000000,B00001111,B11000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111, + B11000000,B00111111,B11100001,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111, + B11000000,B01111111,B11110011,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111, + B11000000,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111, + B11000001,B11111000,B01111111,B10000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B11000001,B11110000,B00111111,B00000011,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000, + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000 + }; + + const unsigned char start_bmp3[] PROGMEM = { + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111, + B11000000,B00001111,B11000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111, + B11000000,B00111111,B11100001,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111, + B11000000,B01111111,B11110011,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111, + B11000000,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111, + B11000001,B11111000,B01111111,B10000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B11000001,B11110000,B00111111,B00000011,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00011111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B01111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, + B11000001,B11100000,B00011110,B00000001,B11100001,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111, + B11000001,B11100000,B00011110,B00000001,B11100011,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111, + B11000001,B11100000,B00011110,B00000001,B11100011,B11110011,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100111,B11100000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100111,B11000000,B01111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B01111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B11000000,B00111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100011,B11100000,B00111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100011,B11111111,B00111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100001,B11111111,B00111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B11111111,B00111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B01111111,B00111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000, + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000 + }; + + const unsigned char start_bmp4[] PROGMEM = { + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111, + B11000000,B00001111,B11000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111, + B11000000,B00111111,B11100001,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111, + B11000000,B01111111,B11110011,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111, + B11000000,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111, + B11000001,B11111000,B01111111,B10000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B11000001,B11110000,B00111111,B00000011,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00011111,B00000000,B00000011,B11100000,B00000000,B00000000,B00000000,B00000000,B01111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B01111111,B11000000,B00001111,B11111000,B00000000,B00000000,B00000000,B00000000,B00111111, + B11000001,B11100000,B00011110,B00000001,B11100001,B11111111,B11100000,B00011111,B11111100,B00000000,B00000000,B00000000,B00000000,B00011111, + B11000001,B11100000,B00011110,B00000001,B11100011,B11111111,B11110000,B00111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00001111, + B11000001,B11100000,B00011110,B00000001,B11100011,B11110011,B11111000,B00111111,B00111110,B00000000,B00000000,B00000000,B00000000,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100111,B11100000,B11111100,B01111100,B00011111,B00000000,B00000000,B00000000,B00000000,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100111,B11000000,B01111100,B01111100,B00001111,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B01111100,B01111000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B11000000,B00111100,B01111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100011,B11100000,B00111100,B01111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100011,B11111111,B00111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100001,B11111111,B00111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B11111111,B00111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B01111111,B00111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000, + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000 + }; + + const unsigned char start_bmp5[] PROGMEM = { + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00111111,B11111111, + B11000000,B00001111,B11000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00011111,B11111111, + B11000000,B00111111,B11100001,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00001111,B11111111, + B11000000,B01111111,B11110011,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000111,B11111111, + B11000000,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000011,B11111111, + B11000001,B11111000,B01111111,B10000111,B11100000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000001,B11111111, + B11000001,B11110000,B00111111,B00000011,B11100000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,B11111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00011111,B00000000,B00000011,B11100000,B01111000,B00000000,B00000000,B00000000,B01111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B01111111,B11000000,B00001111,B11111000,B01111000,B00000000,B00000000,B00000000,B00111111, + B11000001,B11100000,B00011110,B00000001,B11100001,B11111111,B11100000,B00011111,B11111100,B01111000,B00000000,B00000000,B00000000,B00011111, + B11000001,B11100000,B00011110,B00000001,B11100011,B11111111,B11110000,B00111111,B11111110,B01111000,B00000000,B00000000,B00000000,B00001111, + B11000001,B11100000,B00011110,B00000001,B11100011,B11110011,B11111000,B00111111,B00111110,B01111000,B00000000,B00000000,B00000000,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100111,B11100000,B11111100,B01111100,B00011111,B01111000,B00000000,B00000000,B00000000,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100111,B11000000,B01111100,B01111100,B00001111,B01111000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B01111100,B01111000,B00001111,B01111000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B01111000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B01111000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B01111000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B11000000,B00111100,B01111000,B00000000,B01111000,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100011,B11100000,B00111100,B01111000,B00000000,B01111100,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100011,B11111111,B00111111,B11111000,B00000000,B01111111,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100001,B11111111,B00111111,B11111000,B00000000,B00111111,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B11111111,B00111111,B11111000,B00000000,B00011111,B00000000,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B01111111,B00111111,B11111000,B00000000,B00001111,B00000000,B00000000,B00000000,B00000011, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000, + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000 + }; + + const unsigned char start_bmp6[] PROGMEM = { + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00111111,B11111111, + B11000000,B00001111,B11000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00011000,B00000000,B00011111,B11111111, + B11000000,B00111111,B11100001,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B00000000,B00001111,B11111111, + B11000000,B01111111,B11110011,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B00000000,B00000111,B11111111, + B11000000,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B00000000,B00000011,B11111111, + B11000001,B11111000,B01111111,B10000111,B11100000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000001,B11111111, + B11000001,B11110000,B00111111,B00000011,B11100000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,B11111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00011111,B00000000,B00000011,B11100000,B01111000,B00111100,B00000000,B00000000,B01111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B01111111,B11000000,B00001111,B11111000,B01111000,B00111100,B00000000,B00000000,B00111111, + B11000001,B11100000,B00011110,B00000001,B11100001,B11111111,B11100000,B00011111,B11111100,B01111000,B00111100,B00000000,B00000000,B00011111, + B11000001,B11100000,B00011110,B00000001,B11100011,B11111111,B11110000,B00111111,B11111110,B01111000,B00111100,B00000000,B00000000,B00001111, + B11000001,B11100000,B00011110,B00000001,B11100011,B11110011,B11111000,B00111111,B00111110,B01111000,B00111100,B00000000,B00000000,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100111,B11100000,B11111100,B01111100,B00011111,B01111000,B00111100,B00000000,B00000000,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100111,B11000000,B01111100,B01111100,B00001111,B01111000,B00111100,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B01111100,B01111000,B00001111,B01111000,B00111100,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B01111000,B00111100,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B01111000,B00111100,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B01111000,B00111100,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B11000000,B00111100,B01111000,B00000000,B01111000,B00111100,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100011,B11100000,B00111100,B01111000,B00000000,B01111100,B00111100,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100011,B11111111,B00111111,B11111000,B00000000,B01111111,B10111100,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100001,B11111111,B00111111,B11111000,B00000000,B00111111,B10111111,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B11111111,B00111111,B11111000,B00000000,B00011111,B10111111,B00000000,B00000000,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B01111111,B00111111,B11111000,B00000000,B00001111,B10111111,B00000000,B00000000,B00000011, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000, + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000 + }; + + #endif + +#endif + +#if ENABLED(BOOT_MARLIN_LOGO_ANIMATED) + #ifndef MARLIN_BOOTSCREEN_FRAME_TIME + #define MARLIN_BOOTSCREEN_FRAME_TIME 100 // (ms) + #endif + const unsigned char * const marlin_bootscreen_animation[] PROGMEM = { + start_bmp1, start_bmp2, start_bmp3, start_bmp4, start_bmp5, start_bmp6, start_bmp + }; #endif #ifndef START_BMP_BYTEWIDTH - #define START_BMP_BYTEWIDTH ((START_BMPWIDTH + 7) / 8) + #define START_BMP_BYTEWIDTH CEILING(START_BMPWIDTH, 8) #endif #ifndef START_BMPHEIGHT #define START_BMPHEIGHT (sizeof(start_bmp) / (START_BMP_BYTEWIDTH)) diff --git a/Marlin/src/lcd/dogm/dogm_Statusscreen.h b/Marlin/src/lcd/dogm/dogm_Statusscreen.h index 6f0d10831..ed2978a42 100644 --- a/Marlin/src/lcd/dogm/dogm_Statusscreen.h +++ b/Marlin/src/lcd/dogm/dogm_Statusscreen.h @@ -1220,10 +1220,10 @@ #define STATUS_HOTEND4_WIDTH STATUS_HOTEND3_WIDTH #endif #ifndef STATUS_HOTEND5_WIDTH - #define STATUS_HOTEND5_WIDTH STATUS_HOTEND5_WIDTH + #define STATUS_HOTEND5_WIDTH STATUS_HOTEND4_WIDTH #endif #ifndef STATUS_HOTEND6_WIDTH - #define STATUS_HOTEND6_WIDTH STATUS_HOTEND6_WIDTH + #define STATUS_HOTEND6_WIDTH STATUS_HOTEND5_WIDTH #endif constexpr uint8_t status_hotend_width[HOTENDS] = ARRAY_N(HOTENDS, STATUS_HOTEND1_WIDTH, STATUS_HOTEND2_WIDTH, STATUS_HOTEND3_WIDTH, STATUS_HOTEND4_WIDTH, STATUS_HOTEND5_WIDTH, STATUS_HOTEND6_WIDTH); @@ -1264,10 +1264,10 @@ #define STATUS_HOTEND4_X STATUS_HOTEND3_X + STATUS_HEATERS_XSPACE #endif #ifndef STATUS_HOTEND5_X - #define STATUS_HOTEND5_X STATUS_HOTEND5_X + STATUS_HEATERS_XSPACE + #define STATUS_HOTEND5_X STATUS_HOTEND4_X + STATUS_HEATERS_XSPACE #endif #ifndef STATUS_HOTEND6_X - #define STATUS_HOTEND6_X STATUS_HOTEND6_X + STATUS_HEATERS_XSPACE + #define STATUS_HOTEND6_X STATUS_HOTEND5_X + STATUS_HEATERS_XSPACE #endif #if HOTENDS > 2 @@ -1291,10 +1291,10 @@ #define STATUS_HOTEND4_TEXT_X STATUS_HOTEND3_TEXT_X + STATUS_HEATERS_XSPACE #endif #ifndef STATUS_HOTEND5_TEXT_X - #define STATUS_HOTEND5_TEXT_X STATUS_HOTEND5_TEXT_X + STATUS_HEATERS_XSPACE + #define STATUS_HOTEND5_TEXT_X STATUS_HOTEND4_TEXT_X + STATUS_HEATERS_XSPACE #endif #ifndef STATUS_HOTEND6_TEXT_X - #define STATUS_HOTEND6_TEXT_X STATUS_HOTEND6_TEXT_X + STATUS_HEATERS_XSPACE + #define STATUS_HOTEND6_TEXT_X STATUS_HOTEND5_TEXT_X + STATUS_HEATERS_XSPACE #endif constexpr uint8_t status_hotend_text_x[] = ARRAY_N(HOTENDS, STATUS_HOTEND1_TEXT_X, STATUS_HOTEND2_TEXT_X, STATUS_HOTEND3_TEXT_X, STATUS_HOTEND4_TEXT_X, STATUS_HOTEND5_TEXT_X, STATUS_HOTEND6_TEXT_X); #define STATUS_HOTEND_TEXT_X(N) status_hotend_text_x[N] diff --git a/Marlin/src/lcd/dogm/lcdprint_u8g.cpp b/Marlin/src/lcd/dogm/lcdprint_u8g.cpp index d46eb8590..c9ff96547 100644 --- a/Marlin/src/lcd/dogm/lcdprint_u8g.cpp +++ b/Marlin/src/lcd/dogm/lcdprint_u8g.cpp @@ -22,7 +22,7 @@ int lcd_glyph_height(void) { return u8g_GetFontBBXHeight(u8g.getU8g()); } -void lcd_moveto(const uint8_t col, const uint8_t row) { u8g.setPrintPos(col, row); } +void lcd_moveto(const lcd_uint_t col, const lcd_uint_t row) { u8g.setPrintPos(col, row); } void lcd_put_int(const int i) { u8g.print(i); } @@ -33,26 +33,22 @@ int lcd_put_wchar_max(wchar_t c, pixel_len_t max_length) { u8g.print((char)c); return u8g_GetFontBBXWidth(u8g.getU8g()); } - unsigned int x = u8g.getPrintCol(), - y = u8g.getPrintRow(), - ret = uxg_DrawWchar(u8g.getU8g(), x, y, c, max_length); + u8g_uint_t x = u8g.getPrintCol(), y = u8g.getPrintRow(), + ret = uxg_DrawWchar(u8g.getU8g(), x, y, c, max_length); u8g.setPrintPos(x + ret, y); - return ret; } int lcd_put_u8str_max(const char * utf8_str, pixel_len_t max_length) { - unsigned int x = u8g.getPrintCol(), - y = u8g.getPrintRow(), - ret = uxg_DrawUtf8Str(u8g.getU8g(), x, y, utf8_str, max_length); + u8g_uint_t x = u8g.getPrintCol(), y = u8g.getPrintRow(), + ret = uxg_DrawUtf8Str(u8g.getU8g(), x, y, utf8_str, max_length); u8g.setPrintPos(x + ret, y); return ret; } int lcd_put_u8str_max_P(PGM_P utf8_str_P, pixel_len_t max_length) { - unsigned int x = u8g.getPrintCol(), - y = u8g.getPrintRow(), - ret = uxg_DrawUtf8StrP(u8g.getU8g(), x, y, utf8_str_P, max_length); + u8g_uint_t x = u8g.getPrintCol(), y = u8g.getPrintRow(), + ret = uxg_DrawUtf8StrP(u8g.getU8g(), x, y, utf8_str_P, max_length); u8g.setPrintPos(x + ret, y); return ret; } diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp index f04d2e89a..4db6752b4 100644 --- a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp @@ -100,8 +100,7 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, const uint8_t ty) { const char *str = i16tostr3(temp); const uint8_t len = str[0] != ' ' ? 3 : str[1] != ' ' ? 2 : 1; - lcd_moveto(tx - len * (INFO_FONT_WIDTH) / 2 + 1, ty); - lcd_put_u8str(&str[3-len]); + lcd_put_u8str(tx - len * (INFO_FONT_WIDTH) / 2 + 1, ty, &str[3-len]); lcd_put_wchar(LCD_STR_DEGREE[0]); } @@ -264,8 +263,7 @@ FORCE_INLINE void _draw_heater_status(const heater_ind_t heater, const bool blin // FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const bool blink) { const uint8_t offs = (XYZ_SPACING) * axis; - lcd_moveto(X_LABEL_POS + offs, XYZ_BASELINE); - lcd_put_wchar('X' + axis); + lcd_put_wchar(X_LABEL_POS + offs, XYZ_BASELINE, 'X' + axis); lcd_moveto(X_VALUE_POS + offs, XYZ_BASELINE); if (blink) lcd_put_u8str(value); @@ -429,8 +427,7 @@ void MarlinUI::draw_status_screen() { c = '*'; } #endif - lcd_moveto(STATUS_FAN_TEXT_X, STATUS_FAN_TEXT_Y); - lcd_put_u8str(i16tostr3(thermalManager.fanPercent(spd))); + lcd_put_u8str(STATUS_FAN_TEXT_X, STATUS_FAN_TEXT_Y, i16tostr3(thermalManager.fanPercent(spd))); lcd_put_wchar(c); } } @@ -488,8 +485,7 @@ void MarlinUI::draw_status_screen() { #if ENABLED(DOGM_SD_PERCENT) if (PAGE_CONTAINS(41, 48)) { // Percent complete - lcd_moveto(55, 48); - lcd_put_u8str(ui8tostr3(progress)); + lcd_put_u8str(55, 48, ui8tostr3(progress)); lcd_put_wchar('%'); } #endif @@ -510,8 +506,7 @@ void MarlinUI::draw_status_screen() { duration_t elapsed = print_job_timer.duration(); bool has_days = (elapsed.value >= 60*60*24L); uint8_t len = elapsed.toDigital(buffer, has_days); - lcd_moveto(SD_DURATION_X, EXTRAS_BASELINE); - lcd_put_u8str(buffer); + lcd_put_u8str(SD_DURATION_X, EXTRAS_BASELINE, buffer); } #endif // HAS_PRINT_PROGRESS @@ -520,10 +515,6 @@ void MarlinUI::draw_status_screen() { // XYZ Coordinates // - #define X_LABEL_POS 3 - #define X_VALUE_POS 11 - #define XYZ_SPACING 37 - #if ENABLED(XYZ_HOLLOW_FRAME) #define XYZ_FRAME_TOP 29 #define XYZ_FRAME_HEIGHT INFO_FONT_ASCENT + 3 @@ -550,8 +541,6 @@ void MarlinUI::draw_status_screen() { // Two-component mix / gradient instead of XY - lcd_moveto(X_LABEL_POS, XYZ_BASELINE); - char mixer_messages[12]; const char *mix_label; #if ENABLED(GRADIENT_MIX) @@ -566,7 +555,7 @@ void MarlinUI::draw_status_screen() { mix_label = "Mx"; } sprintf_P(mixer_messages, PSTR("%s %d;%d%% "), mix_label, int(mixer.mix[0]), int(mixer.mix[1])); - lcd_put_u8str(mixer_messages); + lcd_put_u8str(X_LABEL_POS, XYZ_BASELINE, mixer_messages); #else @@ -591,28 +580,22 @@ void MarlinUI::draw_status_screen() { if (PAGE_CONTAINS(EXTRAS_2_BASELINE - INFO_FONT_ASCENT, EXTRAS_2_BASELINE - 1)) { set_font(FONT_MENU); - lcd_moveto(3, EXTRAS_2_BASELINE); - lcd_put_wchar(LCD_STR_FEEDRATE[0]); + lcd_put_wchar(3, EXTRAS_2_BASELINE, LCD_STR_FEEDRATE[0]); set_font(FONT_STATUSMENU); - lcd_moveto(12, EXTRAS_2_BASELINE); - lcd_put_u8str(i16tostr3(feedrate_percentage)); + lcd_put_u8str(12, EXTRAS_2_BASELINE, i16tostr3(feedrate_percentage)); lcd_put_wchar('%'); // // Filament sensor display if SD is disabled // #if ENABLED(FILAMENT_LCD_DISPLAY) && DISABLED(SDSUPPORT) - lcd_moveto(56, EXTRAS_2_BASELINE); - lcd_put_u8str(wstring); - lcd_moveto(102, EXTRAS_2_BASELINE); - lcd_put_u8str(mstring); + lcd_put_u8str(56, EXTRAS_2_BASELINE, wstring); + lcd_put_u8str(102, EXTRAS_2_BASELINE, mstring); lcd_put_wchar('%'); set_font(FONT_MENU); - lcd_moveto(47, EXTRAS_2_BASELINE); - lcd_put_wchar(LCD_STR_FILAM_DIA[0]); // lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA)); - lcd_moveto(93, EXTRAS_2_BASELINE); - lcd_put_wchar(LCD_STR_FILAM_MUL[0]); + lcd_put_wchar(47, EXTRAS_2_BASELINE, LCD_STR_FILAM_DIA[0]); // lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA)); + lcd_put_wchar(93, EXTRAS_2_BASELINE, LCD_STR_FILAM_MUL[0]); #endif } diff --git a/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp b/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp index 023ad66ac..9d9622cd6 100644 --- a/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp +++ b/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp @@ -102,30 +102,29 @@ void MarlinUI::set_font(const MarlinFont font_nr) { } } +bool MarlinUI::detected() { return true; } + #if ENABLED(SHOW_BOOTSCREEN) #if ENABLED(SHOW_CUSTOM_BOOTSCREEN) // Draws a slice of a particular frame of the custom bootscreen, without the u8g loop void MarlinUI::draw_custom_bootscreen(const uint8_t frame/*=0*/) { constexpr u8g_uint_t left = u8g_uint_t((LCD_PIXEL_WIDTH - (CUSTOM_BOOTSCREEN_BMPWIDTH)) / 2), - top = u8g_uint_t((LCD_PIXEL_HEIGHT - (CUSTOM_BOOTSCREEN_BMPHEIGHT)) / 2); + top = u8g_uint_t((LCD_PIXEL_HEIGHT - (CUSTOM_BOOTSCREEN_BMPHEIGHT)) / 2); #if ENABLED(CUSTOM_BOOTSCREEN_INVERTED) constexpr u8g_uint_t right = left + CUSTOM_BOOTSCREEN_BMPWIDTH, bottom = top + CUSTOM_BOOTSCREEN_BMPHEIGHT; #endif const u8g_pgm_uint8_t * const bmp = - #if ENABLED(ANIMATED_BOOTSCREEN) + #if ENABLED(CUSTOM_BOOTSCREEN_ANIMATED) (u8g_pgm_uint8_t*)pgm_read_ptr(&custom_bootscreen_animation[frame]) #else custom_start_bmp #endif ; - u8g.drawBitmapP( - left, top, - CEILING(CUSTOM_BOOTSCREEN_BMPWIDTH, 8), CUSTOM_BOOTSCREEN_BMPHEIGHT, bmp - ); + u8g.drawBitmapP(left, top, CUSTOM_BOOTSCREEN_BMP_BYTEWIDTH, CUSTOM_BOOTSCREEN_BMPHEIGHT, bmp); #if ENABLED(CUSTOM_BOOTSCREEN_INVERTED) if (frame == 0) { @@ -140,7 +139,7 @@ void MarlinUI::set_font(const MarlinFont font_nr) { // Shows the custom bootscreen, with the u8g loop, animations and delays void MarlinUI::show_custom_bootscreen() { - #if DISABLED(ANIMATED_BOOTSCREEN) + #if DISABLED(CUSTOM_BOOTSCREEN_ANIMATED) constexpr millis_t d = 0; constexpr uint8_t f = 0; #else @@ -163,23 +162,22 @@ void MarlinUI::set_font(const MarlinFont font_nr) { // Draws a slice of the Marlin bootscreen, without the u8g loop void MarlinUI::draw_marlin_bootscreen() { // Screen dimensions. - //const uint8_t width = u8g.getWidth(), height = u8g.getHeight(); - constexpr uint8_t width = LCD_PIXEL_WIDTH, height = LCD_PIXEL_HEIGHT; + //const u8g_uint_t width = u8g.getWidth(), height = u8g.getHeight(); + constexpr u8g_uint_t width = LCD_PIXEL_WIDTH, height = LCD_PIXEL_HEIGHT; // Determine text space needed #ifndef STRING_SPLASH_LINE2 - constexpr uint8_t text_total_height = MENU_FONT_HEIGHT, - text_width_1 = uint8_t(sizeof(STRING_SPLASH_LINE1) - 1) * uint8_t(MENU_FONT_WIDTH), - text_width_2 = 0; + constexpr u8g_uint_t text_total_height = MENU_FONT_HEIGHT, + text_width_2 = 0; #else - constexpr uint8_t text_total_height = uint8_t(MENU_FONT_HEIGHT) * 2, - text_width_1 = uint8_t(sizeof(STRING_SPLASH_LINE1) - 1) * uint8_t(MENU_FONT_WIDTH), - text_width_2 = uint8_t(sizeof(STRING_SPLASH_LINE2) - 1) * uint8_t(MENU_FONT_WIDTH); + constexpr u8g_uint_t text_total_height = (MENU_FONT_HEIGHT) * 2, + text_width_2 = u8g_uint_t((sizeof(STRING_SPLASH_LINE2) - 1) * (MENU_FONT_WIDTH)); #endif - constexpr uint8_t text_max_width = _MAX(text_width_1, text_width_2), - rspace = width - (START_BMPWIDTH); + constexpr u8g_uint_t text_width_1 = u8g_uint_t((sizeof(STRING_SPLASH_LINE1) - 1) * (MENU_FONT_WIDTH)), + text_max_width = _MAX(text_width_1, text_width_2), + rspace = width - (START_BMPWIDTH); - int8_t offx, offy, txt_base, txt_offx_1, txt_offx_2; + u8g_int_t offx, offy, txt_base, txt_offx_1, txt_offx_2; // Can the text fit to the right of the bitmap? if (text_max_width < rspace) { @@ -200,13 +198,29 @@ void MarlinUI::set_font(const MarlinFont font_nr) { NOLESS(offx, 0); NOLESS(offy, 0); - u8g.drawBitmapP(offx, offy, (START_BMPWIDTH + 7) / 8, START_BMPHEIGHT, start_bmp); - set_font(FONT_MENU); - #ifndef STRING_SPLASH_LINE2 - u8g.drawStr(txt_offx_1, txt_base, STRING_SPLASH_LINE1); + auto draw_bootscreen_bmp = [&](const uint8_t *bitmap) { + u8g.drawBitmapP(offx, offy, START_BMP_BYTEWIDTH, START_BMPHEIGHT, bitmap); + set_font(FONT_MENU); + #ifndef STRING_SPLASH_LINE2 + lcd_put_u8str_P(txt_offx_1, txt_base, PSTR(STRING_SPLASH_LINE1)); + #else + lcd_put_u8str_P(txt_offx_1, txt_base - (MENU_FONT_HEIGHT), PSTR(STRING_SPLASH_LINE1)); + lcd_put_u8str_P(txt_offx_2, txt_base, PSTR(STRING_SPLASH_LINE2)); + #endif + }; + + #if DISABLED(BOOT_MARLIN_LOGO_ANIMATED) + draw_bootscreen_bmp(start_bmp); #else - u8g.drawStr(txt_offx_1, txt_base - (MENU_FONT_HEIGHT), STRING_SPLASH_LINE1); - u8g.drawStr(txt_offx_2, txt_base, STRING_SPLASH_LINE2); + constexpr millis_t d = MARLIN_BOOTSCREEN_FRAME_TIME; + LOOP_L_N(f, COUNT(marlin_bootscreen_animation)) { + u8g.firstPage(); + do { + const u8g_pgm_uint8_t * const bmp = (u8g_pgm_uint8_t*)pgm_read_ptr(&marlin_bootscreen_animation[f]); + draw_bootscreen_bmp(bmp); + } while (u8g.nextPage()); + if (d) safe_delay(d); + } #endif } @@ -286,16 +300,13 @@ void MarlinUI::draw_kill_screen() { #if ENABLED(LIGHTWEIGHT_UI) ST7920_Lite_Status_Screen::clear_text_buffer(); #endif - const uint8_t h4 = u8g.getHeight() / 4; + const u8g_uint_t h4 = u8g.getHeight() / 4; u8g.firstPage(); do { set_font(FONT_MENU); - lcd_moveto(0, h4 * 1); - lcd_put_u8str(status_message); - lcd_moveto(0, h4 * 2); - lcd_put_u8str_P(PSTR(MSG_HALTED)); - lcd_moveto(0, h4 * 3); - lcd_put_u8str_P(PSTR(MSG_PLEASE_RESET)); + lcd_put_u8str(0, h4 * 1, status_message); + lcd_put_u8str_P(0, h4 * 2, PSTR(MSG_HALTED)); + lcd_put_u8str_P(0, h4 * 3, PSTR(MSG_PLEASE_RESET)); } while (u8g.nextPage()); } @@ -303,7 +314,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop #if HAS_LCD_MENU - uint8_t row_y1, row_y2; + u8g_uint_t row_y1, row_y2; #if ENABLED(ADVANCED_PAUSE_FEATURE) @@ -313,8 +324,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop if (!PAGE_CONTAINS(row_y1 + 1, row_y2 + 2)) return; - lcd_moveto(LCD_PIXEL_WIDTH - 11 * (MENU_FONT_WIDTH), row_y2); - lcd_put_wchar('E'); + lcd_put_wchar(LCD_PIXEL_WIDTH - 11 * (MENU_FONT_WIDTH), row_y2, 'E'); lcd_put_wchar((char)('1' + extruder)); lcd_put_wchar(' '); lcd_put_u8str(i16tostr3(thermalManager.degHotend(extruder))); @@ -360,7 +370,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop if (mark_as_selected(row, invert)) { - uint8_t n = LCD_PIXEL_WIDTH; // pixel width of string allowed + u8g_uint_t n = LCD_PIXEL_WIDTH; // pixel width of string allowed if (center && !valstr) { int8_t pad = (LCD_WIDTH - utf8_strlen_P(pstr)) / 2; @@ -377,11 +387,10 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop UNUSED(pre_char); if (mark_as_selected(row, sel)) { - uint8_t n = (LCD_WIDTH - 2) * (MENU_FONT_WIDTH); + u8g_uint_t n = (LCD_WIDTH - 2) * (MENU_FONT_WIDTH); n -= lcd_put_u8str_max_P(pstr, n); while (n > MENU_FONT_WIDTH) n -= lcd_put_wchar(' '); - lcd_moveto(LCD_PIXEL_WIDTH - (MENU_FONT_WIDTH), row_y2); - lcd_put_wchar(post_char); + lcd_put_wchar(LCD_PIXEL_WIDTH - (MENU_FONT_WIDTH), row_y2, post_char); lcd_put_wchar(' '); } } @@ -390,7 +399,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop void _draw_menu_item_edit(const bool sel, const uint8_t row, PGM_P const pstr, const char* const data, const bool pgm) { if (mark_as_selected(row, sel)) { const uint8_t vallen = (pgm ? utf8_strlen_P(data) : utf8_strlen((char*)data)); - uint8_t n = (LCD_WIDTH - 2 - vallen) * (MENU_FONT_WIDTH); + u8g_uint_t n = (LCD_WIDTH - 2 - vallen) * (MENU_FONT_WIDTH); n -= lcd_put_u8str_max_P(pstr, n); lcd_put_wchar(':'); while (n > MENU_FONT_WIDTH) n -= lcd_put_wchar(' '); @@ -402,13 +411,13 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop void draw_edit_screen(PGM_P const pstr, const char* const value/*=nullptr*/) { ui.encoder_direction_normal(); - const uint8_t labellen = utf8_strlen_P(pstr), vallen = utf8_strlen(value); + const u8g_uint_t labellen = utf8_strlen_P(pstr), vallen = utf8_strlen(value); bool extra_row = labellen > LCD_WIDTH - 2 - vallen; #if ENABLED(USE_BIG_EDIT_FONT) // Use the menu font if the label won't fit on a single line - constexpr uint8_t lcd_edit_width = (LCD_PIXEL_WIDTH) / (EDIT_FONT_WIDTH); - uint8_t lcd_chr_fit, one_chr_width; + constexpr u8g_uint_t lcd_edit_width = (LCD_PIXEL_WIDTH) / (EDIT_FONT_WIDTH); + u8g_uint_t lcd_chr_fit, one_chr_width; if (labellen <= lcd_edit_width - 1) { if (labellen + vallen + 1 > lcd_edit_width) extra_row = true; lcd_chr_fit = lcd_edit_width + 1; @@ -421,20 +430,17 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop ui.set_font(FONT_MENU); } #else - constexpr uint8_t lcd_chr_fit = LCD_WIDTH, - one_chr_width = MENU_FONT_WIDTH; + constexpr u8g_uint_t lcd_chr_fit = LCD_WIDTH, + one_chr_width = MENU_FONT_WIDTH; #endif // Center the label and value lines on the middle line - uint8_t baseline = extra_row ? (LCD_PIXEL_HEIGHT) / 2 - 1 - : (LCD_PIXEL_HEIGHT + EDIT_FONT_ASCENT) / 2; + u8g_uint_t baseline = extra_row ? (LCD_PIXEL_HEIGHT) / 2 - 1 + : (LCD_PIXEL_HEIGHT + EDIT_FONT_ASCENT) / 2; // Assume the label is alpha-numeric (with a descender) bool onpage = PAGE_CONTAINS(baseline - (EDIT_FONT_ASCENT - 1), baseline + EDIT_FONT_DESCENT); - if (onpage) { - lcd_moveto(0, baseline); - lcd_put_u8str_P(pstr); - } + if (onpage) lcd_put_u8str_P(0, baseline, pstr); // If a value is included, print a colon, then print the value right-justified if (value != nullptr) { @@ -445,23 +451,21 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop onpage = PAGE_CONTAINS(baseline - (EDIT_FONT_ASCENT - 1), baseline); } if (onpage) { - lcd_moveto(((lcd_chr_fit - 1) - (vallen + 1)) * one_chr_width, baseline); // Right-justified, leaving padded by spaces - lcd_put_wchar(' '); // overwrite char if value gets shorter + lcd_put_wchar(((lcd_chr_fit - 1) - (vallen + 1)) * one_chr_width, baseline, ' '); // Right-justified, padded, add a leading space lcd_put_u8str(value); } } } - inline void draw_boxed_string(const uint8_t x, const uint8_t y, PGM_P const pstr, const bool inv) { - const uint8_t len = utf8_strlen_P(pstr), bw = len * (MENU_FONT_WIDTH), - bx = x * (MENU_FONT_WIDTH), by = (y + 1) * (MENU_FONT_HEIGHT); + inline void draw_boxed_string(const u8g_uint_t x, const u8g_uint_t y, PGM_P const pstr, const bool inv) { + const u8g_uint_t len = utf8_strlen_P(pstr), bw = len * (MENU_FONT_WIDTH), + bx = x * (MENU_FONT_WIDTH), by = (y + 1) * (MENU_FONT_HEIGHT); if (inv) { u8g.setColorIndex(1); u8g.drawBox(bx - 1, by - (MENU_FONT_ASCENT) + 1, bw + 2, MENU_FONT_HEIGHT - 1); u8g.setColorIndex(0); } - lcd_moveto(bx, by); - lcd_put_u8str_P(pstr); + lcd_put_u8str_P(bx, by, pstr); if (inv) u8g.setColorIndex(1); } @@ -479,8 +483,8 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop if (mark_as_selected(row, sel)) { if (isDir) lcd_put_wchar(LCD_STR_FOLDER[0]); constexpr uint8_t maxlen = LCD_WIDTH - 1; - const uint8_t pixw = maxlen * (MENU_FONT_WIDTH); - uint8_t n = pixw - lcd_put_u8str_max(ui.scrolled_filename(theCard, maxlen, row, sel), pixw); + const u8g_uint_t pixw = maxlen * (MENU_FONT_WIDTH); + u8g_uint_t n = pixw - lcd_put_u8str_max(ui.scrolled_filename(theCard, maxlen, row, sel), pixw); while (n > MENU_FONT_WIDTH) n -= lcd_put_wchar(' '); } } @@ -499,8 +503,8 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop void MarlinUI::ubl_plot(const uint8_t x_plot, const uint8_t y_plot) { // Scale the box pixels appropriately - uint8_t x_map_pixels = ((MAP_MAX_PIXELS_X - 4) / (GRID_MAX_POINTS_X)) * (GRID_MAX_POINTS_X), - y_map_pixels = ((MAP_MAX_PIXELS_Y - 4) / (GRID_MAX_POINTS_Y)) * (GRID_MAX_POINTS_Y), + u8g_uint_t x_map_pixels = ((MAP_MAX_PIXELS_X - 4) / (GRID_MAX_POINTS_X)) * (GRID_MAX_POINTS_X), + y_map_pixels = ((MAP_MAX_PIXELS_Y - 4) / (GRID_MAX_POINTS_Y)) * (GRID_MAX_POINTS_Y), pixels_per_x_mesh_pnt = x_map_pixels / (GRID_MAX_POINTS_X), pixels_per_y_mesh_pnt = y_map_pixels / (GRID_MAX_POINTS_Y), @@ -522,8 +526,8 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop // Display Mesh Point Locations u8g.setColorIndex(1); - const uint8_t sx = x_offset + pixels_per_x_mesh_pnt / 2; - uint8_t y = y_offset + pixels_per_y_mesh_pnt / 2; + const u8g_uint_t sx = x_offset + pixels_per_x_mesh_pnt / 2; + u8g_uint_t y = y_offset + pixels_per_y_mesh_pnt / 2; for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++, y += pixels_per_y_mesh_pnt) if (PAGE_CONTAINS(y, y)) for (uint8_t i = 0, x = sx; i < GRID_MAX_POINTS_X; i++, x += pixels_per_x_mesh_pnt) @@ -531,10 +535,10 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop // Fill in the Specified Mesh Point - uint8_t inverted_y = GRID_MAX_POINTS_Y - y_plot - 1; // The origin is typically in the lower right corner. We need to - // invert the Y to get it to plot in the right location. + const uint8_t y_plot_inv = (GRID_MAX_POINTS_Y - 1) - y_plot; // The origin is typically in the lower right corner. We need to + // invert the Y to get it to plot in the right location. - const uint8_t by = y_offset + inverted_y * pixels_per_y_mesh_pnt; + const u8g_uint_t by = y_offset + y_plot_inv * pixels_per_y_mesh_pnt; if (PAGE_CONTAINS(by, by + pixels_per_y_mesh_pnt)) u8g.drawBox( x_offset + x_plot * pixels_per_x_mesh_pnt, by, @@ -546,26 +550,22 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop // Show X and Y positions at top of screen u8g.setColorIndex(1); if (PAGE_UNDER(7)) { - lcd_moveto(5, 7); - lcd_put_u8str("X:"); + lcd_put_u8str(5, 7, "X:"); lcd_put_u8str(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot])))); - lcd_moveto(74, 7); - lcd_put_u8str("Y:"); + lcd_put_u8str(74, 7, "Y:"); lcd_put_u8str(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot])))); } // Print plot position if (PAGE_CONTAINS(LCD_PIXEL_HEIGHT - (INFO_FONT_HEIGHT - 1), LCD_PIXEL_HEIGHT)) { - lcd_moveto(5, LCD_PIXEL_HEIGHT); - lcd_put_wchar('('); + lcd_put_wchar(5, LCD_PIXEL_HEIGHT, '('); u8g.print(x_plot); lcd_put_wchar(','); u8g.print(y_plot); lcd_put_wchar(')'); // Show the location value - lcd_moveto(74, LCD_PIXEL_HEIGHT); - lcd_put_u8str("Z:"); + lcd_put_u8str(74, LCD_PIXEL_HEIGHT, "Z:"); if (!isnan(ubl.z_values[x_plot][y_plot])) lcd_put_u8str(ftostr43sign(ubl.z_values[x_plot][y_plot])); else diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.cpp new file mode 100644 index 000000000..2e17c6492 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.cpp @@ -0,0 +1,560 @@ +/********************* + * flash_storage.cpp * + *********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../compat.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "../ftdi_eve_lib/ftdi_eve_lib.h" + +#include "media_file_reader.h" +#include "flash_storage.h" + +// The following must be changed whenever the layout of the flash +// data is changed in a manner that would render the data invalid. + +constexpr uint32_t flash_eeprom_version = 1; + +/* SPI Flash Memory Map: + * + * The following offsets and sizes are specified in 4k erase units: + * + * Page Size Description + * 0 16 DATA STORAGE AREA + * 16 1 VERSIONING DATA + * 17 inf MEDIA STORAGE AREA + * + */ + +#define DATA_STORAGE_SIZE_64K + +using namespace FTDI::SPI; +using namespace FTDI::SPI::most_significant_byte_first; + +bool UIFlashStorage::is_present = false; + +#ifdef SPI_FLASH_SS +/************************** SPI Flash Chip Interface **************************/ + + void SPIFlash::wait_while_busy() { + uint8_t status; + safe_delay(1); + do { + spi_flash_select(); + spi_write_8(READ_STATUS_1); + status = spi_read_8(); + spi_flash_deselect(); + safe_delay(1); + } while (status & 1); + } + + void SPIFlash::erase_sector_4k(uint32_t addr) { + spi_flash_select(); + spi_write_8(WRITE_ENABLE); + spi_flash_deselect(); + + spi_flash_select(); + spi_write_8(ERASE_4K); + spi_write_24(addr); + spi_flash_deselect(); + + wait_while_busy(); + } + + void SPIFlash::erase_sector_64k(uint32_t addr) { + spi_flash_select(); + spi_write_8(WRITE_ENABLE); + spi_flash_deselect(); + + spi_flash_select(); + spi_write_8(ERASE_64K); + spi_write_24(addr); + spi_flash_deselect(); + + wait_while_busy(); + } + + void SPIFlash::spi_write_begin(uint32_t addr) { + spi_flash_select(); + spi_write_8(WRITE_ENABLE); + spi_flash_deselect(); + + spi_flash_select(); + spi_write_8(PAGE_PROGRAM); + spi_write_24(addr); + } + + void SPIFlash::spi_write_end() { + spi_flash_deselect(); + wait_while_busy(); + } + + void SPIFlash::spi_read_begin(uint32_t addr) { + spi_flash_select(); + spi_write_8(READ_DATA); + spi_write_24(addr); + } + + void SPIFlash::spi_read_end() { + spi_flash_deselect(); + } + + void SPIFlash::erase_chip() { + spi_flash_select(); + spi_write_8(WRITE_ENABLE); + spi_flash_deselect(); + + spi_flash_select(); + spi_write_8(ERASE_CHIP); + spi_flash_deselect(); + wait_while_busy(); + } + + void SPIFlash::read_jedec_id(uint8_t &manufacturer_id, uint8_t &device_type, uint8_t &capacity) { + spi_flash_select(); + spi_write_8(READ_JEDEC_ID); + manufacturer_id = spi_recv(); + device_type = spi_recv(); + capacity = spi_recv(); + spi_flash_deselect (); + } + + /* This function writes "size" bytes from "data" starting at addr, while properly + * taking into account the special case of writing across a 256 byte page boundary. + * Returns the addr directly after the write. + */ + uint32_t SPIFlash::write(uint32_t addr, const void *_data, size_t size) { + const uint8_t *data = (const uint8_t*) _data; + while (size) { + const uint32_t page_start = addr & 0xFFFF00ul; + const uint32_t page_end = page_start + 256; + const uint32_t write_size = min(page_end - addr, size); + spi_write_begin(addr); + spi_write_bulk(data, write_size); + spi_write_end(); + addr += write_size; + size -= write_size; + data += write_size; + } + return addr; + } + + uint32_t SPIFlash::read(uint32_t addr, void *data, size_t size) { + spi_read_begin(addr); + spi_read_bulk(data, size); + spi_read_end(); + return addr + size; + } + + /********************************** UTILITY ROUTINES *********************************/ + + bool UIFlashStorage::check_known_device() { + uint8_t manufacturer_id, device_type, capacity; + read_jedec_id(manufacturer_id, device_type, capacity); + + const bool is_known = + ((manufacturer_id == 0xEF) && (device_type == 0x40) && (capacity == 0x15)) || // unknown + ((manufacturer_id == 0x01) && (device_type == 0x40) && (capacity == 0x15)) || // Cypress S25FL116K + ((manufacturer_id == 0xEF) && (device_type == 0x14) && (capacity == 0x15)) || // Winbond W25Q16JV + ((manufacturer_id == 0x1F) && (device_type == 0x86) && (capacity == 0x01)) ; // Adesto AT255F161 + + if (!is_known) { + SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("Unable to locate supported SPI Flash Memory."); + SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR(" Manufacturer ID, got: ", manufacturer_id); + SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR(" Device Type , got: ", device_type); + SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR(" Capacity , got: ", capacity); + } + + return is_known; + } + + void UIFlashStorage::initialize() { + for(uint8_t i = 0; i < 10; i++) { + if (check_known_device()) { + is_present = true; + break; + } + safe_delay(1000); + } + } + + /**************************** DATA STORAGE AREA (first 4K or 64k) ********************/ + + #ifdef DATA_STORAGE_SIZE_64K + constexpr uint32_t data_storage_area_size = 64 * 1024; // Large erase unit + #else + constexpr uint32_t data_storage_area_size = 4 * 1024; // Small erase unit + #endif + + /* In order to provide some degree of wear leveling, each data write to the + * SPI Flash chip is appended to data that was already written before, until + * the data storage area is completely filled. New data is written preceeded + * with a 32-bit delimiter 'LULZ', so that we can distinguish written and + * unwritten data: + * + * 'LULZ' <--- 1st record delimiter + * + * + * + * 'LULZ' <--- 2nd record delimiter + * + * + * + * ... + * 'LULZ' <--- Last record delimiter + * + * + * + * 0xFF <--- Start of free space + * 0xFF + * ... + * + * This function walks down the data storage area, verifying that the + * delimiters are either 'LULZ' or 0xFFFFFFFF. In the case that an invalid + * delimiter is found, this function returns -1, indicating that the Flash + * data is invalid (this will happen if the block_size changed with respect + * to earlier firmware). Otherwise, it returns the offset of the last + * valid delimiter 'LULZ', indicating the most recently written data. + */ + int32_t UIFlashStorage::get_config_read_offset(uint32_t block_size) { + uint16_t stride = 4 + block_size; + int32_t read_offset = -1; + + for(uint32_t offset = 0; offset < (data_storage_area_size - stride); offset += stride) { + uint32_t delim; + spi_read_begin(offset); + spi_read_bulk (&delim, sizeof(delim)); + spi_read_end(); + switch (delim) { + case 0xFFFFFFFFul: return read_offset; + case delimiter: read_offset = offset; break; + default: + SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR("Invalid delimiter in Flash: ", delim); + return -1; + } + } + SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("No LULZ delimiter found."); + return -1; + } + + /* This function returns the offset at which new data should be + * appended, or -1 if the Flash needs to be erased */ + int32_t UIFlashStorage::get_config_write_offset(uint32_t block_size) { + int32_t read_offset = get_config_read_offset(block_size); + if (read_offset == -1) return -1; // The SPI flash is invalid + + int32_t write_offset = read_offset + 4 + block_size; + if ((write_offset + 4 + block_size) > data_storage_area_size) { + SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("Not enough free space in Flash."); + return -1; // Not enough free space + } + return write_offset; + } + + bool UIFlashStorage::verify_config_data(const void *data, size_t size) { + if (!is_present) return false; + + int32_t read_addr = get_config_read_offset(size); + if (read_addr == -1) return false; + + uint32_t delim; + spi_read_begin(read_addr); + spi_read_bulk (&delim, sizeof(delim)); + bool ok = spi_verify_bulk(data,size); + spi_read_end(); + return ok && delim == delimiter; + } + + bool UIFlashStorage::read_config_data(void *data, size_t size) { + if (!is_present) return false; + + int32_t read_addr = get_config_read_offset(size); + if (read_addr == -1) return false; + + uint32_t delim; + spi_read_begin(read_addr); + spi_read_bulk (&delim, sizeof(delim)); + spi_read_bulk (data, size); + spi_read_end(); + return delim == delimiter; + } + + void UIFlashStorage::write_config_data(const void *data, size_t size) { + if (!is_present) { + SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("SPI Flash chip not present. Not saving UI settings."); + return; + } + + // Since Flash storage has a limited number of write cycles, + // make sure that the data is different before rewriting. + + if (verify_config_data(data, size)) { + SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("UI settings already written, skipping write."); + return; + } + + int16_t write_addr = get_config_write_offset(size); + if (write_addr == -1) { + SERIAL_ECHO_START(); + SERIAL_ECHOPGM("Erasing UI settings from SPI Flash... "); + #ifdef DATA_STORAGE_SIZE_64K + erase_sector_64k(0); + #else + erase_sector_4k(0); + #endif + write_addr = 0; + SERIAL_ECHOLNPGM("DONE"); + } + + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Writing UI settings to SPI Flash (offset ", write_addr); + SERIAL_ECHOPGM(")..."); + + const uint32_t delim = delimiter; + write_addr = write(write_addr, &delim, sizeof(delim)); + write_addr = write(write_addr, data, size); + + SERIAL_ECHOLNPGM("DONE"); + } + + /************************** VERSIONING INFO AREA ************************/ + + /* The version info area follows the data storage area. If the version + * is incorrect, the data on the chip is invalid and format_flash should + * be called. + */ + + typedef struct { + uint32_t magic; + uint32_t version; + } flash_version_info; + + constexpr uint32_t version_info_addr = data_storage_area_size; + constexpr uint32_t version_info_size = 4 * 1024; // Small erase unit + + bool UIFlashStorage::is_valid() { + flash_version_info info; + + spi_read_begin(version_info_addr); + spi_read_bulk (&info, sizeof(flash_version_info)); + spi_read_end(); + + return info.magic == delimiter && info.version == flash_eeprom_version; + } + + void UIFlashStorage::write_version_info() { + flash_version_info info; + + info.magic = delimiter; + info.version = flash_eeprom_version; + + spi_write_begin(version_info_addr); + spi_write_bulk(&info, sizeof(flash_version_info)); + spi_write_end(); + } + + /**************************** MEDIA STORAGE AREA *****************************/ + + /* The media storage area follows the versioning info area. It consists + * of a file index followed by the data for one or more media files. + * + * The file index consists of an array of 32-bit file sizes. If a file + * is not present, the file's size will be set to 0xFFFFFFFF + */ + + constexpr uint32_t media_storage_addr = version_info_addr + version_info_size; + constexpr uint8_t media_storage_slots = 4; + + void UIFlashStorage::format_flash() { + SERIAL_ECHO_START(); SERIAL_ECHOPGM("Erasing SPI Flash..."); + SPIFlash::erase_chip(); + SERIAL_ECHOLNPGM("DONE"); + + write_version_info(); + } + + uint32_t UIFlashStorage::get_media_file_start(uint8_t slot) { + uint32_t addr = media_storage_addr + sizeof(uint32_t) * media_storage_slots; + spi_read_begin(media_storage_addr); + for(uint8_t i = 0; i < slot; i++) { + addr += spi_read_32(); + } + spi_read_end(); + return addr; + } + + void UIFlashStorage::set_media_file_size(uint8_t slot, uint32_t size) { + spi_write_begin(media_storage_addr + sizeof(uint32_t) * slot); + spi_write_32(size); + spi_write_end(); + } + + uint32_t UIFlashStorage::get_media_file_size(uint8_t slot) { + spi_read_begin(media_storage_addr + sizeof(uint32_t) * slot); + uint32_t size = spi_read_32(); + spi_read_end(); + return size; + } + + /* Writes a media file from the SD card/USB flash drive into a slot on the SPI Flash. Media + * files must be written sequentially following by a chip erase and it is not possible to + * overwrite files. */ + UIFlashStorage::error_t UIFlashStorage::write_media_file(progmem_str filename, uint8_t slot) { + #if ENABLED(SDSUPPORT) + uint32_t addr; + uint8_t buff[write_page_size]; + + strcpy_P( (char*) buff, (const char*) filename); + + MediaFileReader reader; + if (!reader.open((char*) buff)) { + SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("Unable to find media file"); + return FILE_NOT_FOUND; + } + + if (get_media_file_size(slot) != 0xFFFFFFFFUL) { + SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("Media file already exists"); + return WOULD_OVERWRITE; + } + + SERIAL_ECHO_START(); SERIAL_ECHOPGM("Writing SPI Flash..."); + + set_media_file_size(slot, reader.size()); + addr = get_media_file_start(slot); + + // Write out the file itself + for(;;) { + const int16_t nBytes = reader.read(buff, write_page_size); + if (nBytes == -1) { + SERIAL_ECHOLNPGM("Failed to read from file"); + return READ_ERROR; + } + + addr = write(addr, buff, nBytes); + if (nBytes != write_page_size) + break; + + #if ENABLED(EXTENSIBLE_UI) + ExtUI::yield(); + #endif + } + + SERIAL_ECHOLNPGM("DONE"); + + SERIAL_ECHO_START(); SERIAL_ECHOPGM("Verifying SPI Flash..."); + + bool verifyOk = true; + + // Verify the file index + + if (get_media_file_start(slot+1) != (get_media_file_start(slot) + reader.size())) { + SERIAL_ECHOLNPGM("File index verification failed. "); + verifyOk = false; + } + + // Verify the file itself + addr = get_media_file_start(slot); + reader.rewind(); + + while (verifyOk) { + const int16_t nBytes = reader.read(buff, write_page_size); + if (nBytes == -1) { + SERIAL_ECHOPGM("Failed to read from file"); + verifyOk = false; + break; + } + + spi_read_begin(addr); + if (!spi_verify_bulk(buff, nBytes)) { + verifyOk = false; + spi_read_end(); + break; + } + spi_read_end(); + + addr += nBytes; + if (nBytes != write_page_size) break; + #if ENABLED(EXTENSIBLE_UI) + ExtUI::yield(); + #endif + }; + + if (verifyOk) { + SERIAL_ECHOLNPGM("DONE"); + return SUCCESS; + } else { + SERIAL_ECHOLNPGM("FAIL"); + return VERIFY_ERROR; + } + #else + return VERIFY_ERROR; + #endif // ENABLED(SDSUPPORT) + } + + bool UIFlashStorage::BootMediaReader::isAvailable(uint32_t slot) { + if (!is_present) return false; + + bytes_remaining = get_media_file_size(slot); + if (bytes_remaining != 0xFFFFFFFFUL) { + SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR("Boot media file size:", bytes_remaining); + addr = get_media_file_start(slot); + return true; + } else { + return false; + } + } + + int16_t UIFlashStorage::BootMediaReader::read(void *data, const size_t size) { + if (bytes_remaining == 0xFFFFFFFFUL) return -1; + + if (size > bytes_remaining) + return read(data, bytes_remaining); + + if (size > 0) { + spi_read_begin(addr); + spi_read_bulk(data, size); + spi_read_end(); + addr += size; + bytes_remaining -= size; + } + + return size; + } + + int16_t UIFlashStorage::BootMediaReader::read(void *obj, void *data, const size_t size) { + return reinterpret_cast(obj)->read(data, size); + } + +#else + void UIFlashStorage::initialize() {} + bool UIFlashStorage::is_valid() {return true;} + void UIFlashStorage::write_config_data(const void *, size_t) {} + bool UIFlashStorage::verify_config_data(const void *, size_t) {return false;} + bool UIFlashStorage::read_config_data(void *, size_t ) {return false;} + UIFlashStorage::error_t UIFlashStorage::write_media_file(progmem_str, uint8_t) {return FILE_NOT_FOUND;} + void UIFlashStorage::format_flash() {} + + bool UIFlashStorage::BootMediaReader::isAvailable(uint32_t) {return false;} + int16_t UIFlashStorage::BootMediaReader::read(void *, const size_t) {return -1;} + int16_t UIFlashStorage::BootMediaReader::read(void *, void *, const size_t) {return -1;} +#endif // SPI_FLASH_SS +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.h new file mode 100644 index 000000000..d211f48b3 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.h @@ -0,0 +1,106 @@ +/******************* + * flash_storage.h * + *******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +class SPIFlash { + public: + static constexpr uint32_t erase_unit_size = 4 * 1024; // Minimum erase unit + static constexpr uint32_t write_page_size = 256; // Minimum page write unit + + enum { + READ_STATUS_1 = 0x05, + READ_STATUS_2 = 0x35, + READ_STATUS_3 = 0x33, + WRITE_ENABLE = 0x06, + WRITE_DISABLE = 0x04, + READ_ID = 0x90, + READ_JEDEC_ID = 0x9F, + READ_DATA = 0x03, + PAGE_PROGRAM = 0x02, + ERASE_4K = 0x20, + ERASE_64K = 0xD8, + ERASE_CHIP = 0xC7 + }; + + static void wait_while_busy(); + static void erase_sector_4k(uint32_t addr); + static void erase_sector_64k(uint32_t addr); + static void erase_chip (); + + static void read_jedec_id(uint8_t &manufacturer_id, uint8_t &device_type, uint8_t &capacity); + + static void spi_read_begin(uint32_t addr); + static void spi_read_end(); + + static void spi_write_begin(uint32_t addr); + static void spi_write_end(); + + static uint32_t write(uint32_t addr, const void *data, size_t size); + static uint32_t read(uint32_t addr, void *data, size_t size); +}; + +class UIFlashStorage : private SPIFlash { + private: + + static bool is_present; + static int32_t get_config_read_offset(uint32_t block_size); + static int32_t get_config_write_offset(uint32_t block_size); + + static uint32_t get_media_file_start(uint8_t slot); + static void set_media_file_size(uint8_t slot, uint32_t size); + static uint32_t get_media_file_size(uint8_t slot); + + static constexpr uint32_t delimiter = 0x4C554C5A; // 'LULZ' + public: + enum error_t { + SUCCESS, + FILE_NOT_FOUND, + READ_ERROR, + VERIFY_ERROR, + WOULD_OVERWRITE + }; + + static void initialize (); + static void format_flash (); + static bool check_known_device(); + + static bool is_valid (); + static void write_version_info(); + + static void write_config_data (const void *data, size_t size); + static bool verify_config_data (const void *data, size_t size); + static bool read_config_data (void *data, size_t size); + static error_t write_media_file (progmem_str filename, uint8_t slot = 0); + + class BootMediaReader; +}; + +class UIFlashStorage::BootMediaReader { + private: + uint32_t addr; + uint32_t bytes_remaining; + + public: + bool isAvailable(uint32_t slot = 0); + int16_t read(void *buffer, size_t const size); + + static int16_t read(void *obj, void *buffer, const size_t size); +}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.cpp new file mode 100644 index 000000000..82ceba055 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.cpp @@ -0,0 +1,63 @@ +/************************ + * media_filereader.cpp * + ************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../compat.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + #include "media_file_reader.h" + + #if ENABLED(SDSUPPORT) + bool MediaFileReader::open(const char* filename) { + card.init(SPI_SPEED, SDSS); + volume.init(&card); + root.openRoot(&volume); + return file.open(&root, filename, O_READ); + } + + int16_t MediaFileReader::read(void *buff, size_t bytes) { + return file.read(buff, bytes); + } + + void MediaFileReader::close() { + file.close(); + } + + uint32_t MediaFileReader::size() { + return file.fileSize(); + } + + void MediaFileReader::rewind() { + file.rewind(); + } + + int16_t MediaFileReader::read(void *obj, void *buff, size_t bytes) { + return reinterpret_cast(obj)->read(buff, bytes); + } + #else + bool MediaFileReader::open(const char*) {return -1;} + int16_t MediaFileReader::read(void *, size_t) {return 0;} + void MediaFileReader::close() {} + uint32_t MediaFileReader::size() {return 0;} + void MediaFileReader::rewind() {} + int16_t MediaFileReader::read(void *, void *, size_t) {return 0;} + #endif +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.h new file mode 100644 index 000000000..d64182fd5 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.h @@ -0,0 +1,48 @@ +/********************** + * media_filereader.h * + **********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#include "../../../../../inc/MarlinConfigPre.h" + +#if ENABLED(SDSUPPORT) + #include "../../../../../sd/SdFile.h" + #include "../../../../../sd/cardreader.h" +#endif + +class MediaFileReader { + private: + #if ENABLED(SDSUPPORT) + Sd2Card card; + SdVolume volume; + SdFile root, file; + #endif + + public: + bool open(const char* filename); + int16_t read(void *buff, size_t bytes); + uint32_t size(); + void rewind(); + void close(); + + static int16_t read(void *obj, void *buff, size_t bytes); +}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/compat.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/compat.h new file mode 100644 index 000000000..ae74bcd12 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/compat.h @@ -0,0 +1,53 @@ +/************ + * compat.h * + ************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +/** + * This following provides compatibility whether compiling + * as a part of Marlin or outside it + */ + +#if defined __has_include + #if __has_include ("../../ui_api.h") + #include "../../ui_api.h" + #endif +#else + #include "../../ui_api.h" +#endif + +#ifdef __MARLIN_FIRMWARE__ + // __MARLIN_FIRMWARE__ exists when compiled within Marlin. + #include "pin_mappings.h" +#else + // Messages that are declared in Marlin + #define WELCOME_MSG "Printer Ready" + #define MSG_MEDIA_INSERTED "Media Inserted" + #define MSG_MEDIA_REMOVED "Media Removed" + + namespace UI { + static inline uint32_t safe_millis() {return millis();}; + static inline void yield() {}; + }; +#endif + +class __FlashStringHelper; +typedef const __FlashStringHelper *progmem_str; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/config.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/config.h new file mode 100644 index 000000000..5313bb947 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/config.h @@ -0,0 +1,97 @@ +/************ + * config.h * + ************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#include "compat.h" + +// Define the display board used (see "ftdi_eve_boards.h" for definitions) + +//#define LCD_FTDI_VM800B35A // FTDI 3.5" 320x240 with FT800 +//#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" 480x272 +//#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" 480x272 +//#define LCD_HAOYU_FT810CB // Haoyu with 5" 800x480 +//#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD User Interface + +// Leave the following commented out to use a board's default resolution. +// If you have changed the LCD panel, you may override the resolution +// below (see "ftdi_eve_resolutions.h" for definitions): + +//#define TOUCH_UI_320x240 +//#define TOUCH_UI_480x272 +//#define TOUCH_UI_800x480 + +// Define the printer interface or pins used (see "ui_pin_mappings.h" for definitions): + +//#define CR10_TFT_PINMAP +//#define AO_EXP1_DEPRECATED_PINMAP // UltraLCD EXP1 connector, old AlephObject's wiring +//#define AO_EXP1_PINMAP // UltraLCD EXP1 connector, new AlephObject's wiring +//#define AO_EXP2_PINMAP // UltraLCD EXP2 connector, new AlephObject's wiring +//#define OTHER_PIN_LAYOUT + +// Otherwise. Define all the pins manually: + +#ifdef OTHER_PIN_LAYOUT + // Select interfacing pins, the following pin specifiers are supported: + // + // ARDUINO_DIGITAL_1 - Arduino pin via digitalWrite/digitalRead + // AVR_A1 - Fast AVR port access via PORTA/PINA/DDRA + // 1 - When compiling Marlin, use Marlin pin IDs. + + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #ifdef CLCD_USE_SOFT_SPI + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif +#endif + +// Defines how to orient the display. An inverted (i.e. upside-down) display +// is supported on the FT800. The FT810 or better also support a portrait +// and mirrored orientation. +//#define TOUCH_UI_INVERTED +//#define TOUCH_UI_PORTRAIT +//#define TOUCH_UI_MIRRORED + +// Use a numeric passcode for "Parental lock". +// This is a recommended for smaller displays. +//#define TOUCH_UI_PASSCODE + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Enable this to debug the event framework +//#define UI_FRAMEWORK_DEBUG + +// Enable the developer's menu and screens +//#define DEVELOPER_SCREENS + +// Maximum feed rate for manual extrusion (mm/s) +//#define MAX_MANUAL_FEEDRATE 240 + +// Sets the SPI speed in Hz + +#define SPI_FREQUENCY 8000000 >> SPI_SPEED diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/LICENSE.txt b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/LICENSE.txt new file mode 100644 index 000000000..94a9ed024 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/LICENSE.txt @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/README.md b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/README.md new file mode 100644 index 000000000..6ba985d60 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/README.md @@ -0,0 +1,28 @@ +FTDI EVE Library +---------------- + +The FTDI EVE Library is a fully open-source library and UI framework for the FTDI +FT800 and FT810 graphics processor. + +Although the library has been developed within Lulzbot for providing a user interface +for Marlin, the library has been written so that it can be used in any Arduino sketch. + +The library is split into two parts. The "basic" API provides a shallow interface to +the underlying FTDI hardware and command FIFO and provides low-level access to the +hardware as closely as possible to the API described in the FTDI Programmer's Guide. + +The "extended" API builds on top of the "basic" API to provide a GUI framework for +handling common challenges in building a usable GUI. The GUI framework provides the +following features: + +- Macros for a resolution-independent placement of widgets based on a grid. +- Class-based UI screens, with press and unpress touch events, as well as touch repeat. +- Event loop with button debouncing and button push visual and auditory feedback. +- Easy screen-to-screen navigation including a navigation stack for going backwards. +- Visual feedback for disabled vs enabled buttons, and custom button styles. +- A sound player class for playing individual notes or complete sound sequences. +- Display list caching, for storing static background elements of a screen in RAM_G. + +See the "examples" folder for Arduino sketches. Modify the "src/config.h" file in +each to suit your particular setup. The "sample_configs" contain sample configuration +files for running the sketches on our 3D printer boards. diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/boards.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/boards.h new file mode 100644 index 000000000..85e12238f --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/boards.h @@ -0,0 +1,183 @@ +/************ + * boards.h * + ************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#define HAS_RESOLUTION (defined(TOUCH_UI_320x240) || defined(TOUCH_UI_480x272) || defined(TOUCH_UI_800x480)) + +#define IS_FT800 \ + constexpr uint16_t ftdi_chip = 800; \ + using namespace FTDI_FT800; \ + namespace DL { \ + using namespace FTDI_FT800_DL; \ + } \ + typedef ft800_memory_map ftdi_memory_map; \ + typedef ft800_registers ftdi_registers; + +#define IS_FT810 \ + constexpr uint16_t ftdi_chip = 810; \ + using namespace FTDI_FT810; \ + namespace DL { \ + using namespace FTDI_FT800_DL; \ + using namespace FTDI_FT810_DL; \ + } \ + typedef ft810_memory_map ftdi_memory_map; \ + typedef ft810_registers ftdi_registers; + + +#ifdef LCD_FTDI_VM800B35A + #if !HAS_RESOLUTION + #define TOUCH_UI_320x240 + #endif + #ifndef FTDI_API_LEVEL + #define FTDI_API_LEVEL 800 + #endif + namespace FTDI { + IS_FT800 + constexpr bool Use_Crystal = true; // 0 = use internal oscillator, 1 = module has a crystal populated + constexpr bool GPIO_0_Audio_Enable = false; /* 1 = does use GPIO00 for amplifier control, 0 = not in use for Audio */ + constexpr bool GPIO_1_Audio_Shutdown = true; /* 1 = does use GPIO01 for amplifier control, 0 = not in use for Audio */ + constexpr uint8_t Swizzle = 2; + constexpr uint8_t CSpread = 1; + + constexpr uint16_t touch_threshold = 1200; /* touch-sensitivity */ + } + +/* + * Settings for the Haoyu Electronics, 4.3" Graphical LCD Touchscreen, 480x272, SPI, FT800 (FT800CB-HY43B) + * Haoyu Electronics, 5" Graphical LCD Touchscreen, 480x272, SPI, FT800 (FT800CB-HY50B) + * + * http://www.hotmcu.com/43-graphical-lcd-touchscreen-480x272-spi-ft800-p-111.html?cPath=6_16 + * http://www.hotmcu.com/5-graphical-lcd-touchscreen-480x272-spi-ft800-p-124.html?cPath=6_16 + * + * Datasheet: + * + * http://www.hantronix.com/files/data/1278363262430-3.pdf + * http://www.haoyuelectronics.com/Attachment/HY43-LCD/LCD%20DataSheet.pdf + * http://www.haoyuelectronics.com/Attachment/HY5-LCD-HD/KD50G21-40NT-A1.pdf + * + */ + +#elif defined(LCD_HAOYU_FT800CB) + #if !HAS_RESOLUTION + #define TOUCH_UI_480x272 + #endif + #ifndef FTDI_API_LEVEL + #define FTDI_API_LEVEL 800 + #endif + namespace FTDI { + IS_FT800 + constexpr bool Use_Crystal = true; // 0 = use internal oscillator, 1 = module has a crystal populated + constexpr bool GPIO_0_Audio_Enable = false; + constexpr bool GPIO_1_Audio_Shutdown = false; + constexpr uint8_t Swizzle = 0; + constexpr uint8_t CSpread = 1; + constexpr uint16_t touch_threshold = 2000; /* touch-sensitivity */ + } + +/* + * Settings for the Haoyu Electronics, 5" Graphical LCD Touchscreen, 800x480, SPI, FT810 + * + * http://www.hotmcu.com/5-graphical-lcd-touchscreen-800x480-spi-ft810-p-286.html + * + * Datasheet: + * + * http://www.haoyuelectronics.com/Attachment/HY5-LCD-HD/KD50G21-40NT-A1.pdf + * + */ + +#elif defined(LCD_HAOYU_FT810CB) + #if !HAS_RESOLUTION + #define TOUCH_UI_800x480 + #endif + #ifndef FTDI_API_LEVEL + #define FTDI_API_LEVEL 810 + #endif + namespace FTDI { + IS_FT810 + constexpr bool Use_Crystal = true; // 0 = use internal oscillator, 1 = module has a crystal populated + constexpr bool GPIO_0_Audio_Enable = false; + constexpr bool GPIO_1_Audio_Shutdown = false; + constexpr uint8_t Swizzle = 0; + constexpr uint8_t CSpread = 1; + constexpr uint16_t touch_threshold = 2000; /* touch-sensitivity */ + } + +/* + * Settings for the 4D Systems, 4.3" Embedded SPI Display 480x272, SPI, FT800 (4DLCD-FT843) + * + * http://www.4dsystems.com.au/product/4DLCD_FT843/ + * + * Datasheet: + * + * http://www.4dsystems.com.au/productpages/4DLCD-FT843/downloads/FT843-4.3-Display_datasheet_R_1_2.pdf + * + */ + +#elif defined(LCD_4DSYSTEMS_4DLCD_FT843) + #if !HAS_RESOLUTION + #define TOUCH_UI_480x272 + #endif + #ifndef FTDI_API_LEVEL + #define FTDI_API_LEVEL 800 + #endif + namespace FTDI { + IS_FT800 + constexpr bool Use_Crystal = true; // 0 = use internal oscillator, 1 = module has a crystal populated + constexpr bool GPIO_0_Audio_Enable = false; + constexpr bool GPIO_1_Audio_Shutdown = true; + constexpr uint8_t Swizzle = 0; + constexpr uint8_t CSpread = 1; + constexpr uint16_t touch_threshold = 1200; /* touch-sensitivity */ + } + +/* + * Settings for the Aleph Objects Color LCD User Interface + * + * https://code.alephobjects.com/source/aotctl/ + * + * Datasheet: + * + * http://www.hantronix.com/files/data/s1501799605s500-gh7.pdf + * + */ +#elif defined(LCD_ALEPHOBJECTS_CLCD_UI) + #if !HAS_RESOLUTION + #define TOUCH_UI_800x480 + #endif + #ifndef FTDI_API_LEVEL + #define FTDI_API_LEVEL 810 + #endif + namespace FTDI { + IS_FT810 + constexpr bool Use_Crystal = false; // 0 = use internal oscillator, 1 = module has a crystal populated + constexpr bool GPIO_0_Audio_Enable = true; // The AO CLCD uses GPIO0 to enable audio + constexpr bool GPIO_1_Audio_Shutdown = false; + constexpr uint8_t Swizzle = 0; + constexpr uint8_t CSpread = 0; + constexpr uint16_t touch_threshold = 2000; /* touch-sensitivity */ + } + +#else + + #error Unknown or no LULZBOT_TOUCH_UI board specified. To add a new board, modify "ftdi_eve_boards.h" +#endif diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.cpp new file mode 100644 index 000000000..ad34f4f19 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.cpp @@ -0,0 +1,1174 @@ +/**************** + * commands.cpp * + ****************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "ftdi_basic.h" + +#ifdef FTDI_BASIC + +#define MULTIPLE_OF_4(val) ((((val)+3)>>2)<<2) + +using namespace FTDI; +using namespace FTDI::SPI; + +void CLCD::enable (void) { + mem_write_8(REG::PCLK, Pclk); +} + +void CLCD::disable (void) { + mem_write_8(REG::PCLK, 0x00); +} + +void CLCD::set_brightness (uint8_t brightness) { + mem_write_8(REG::PWM_DUTY, min(128,brightness)); +} + +uint8_t CLCD::get_brightness() { + return mem_read_8(REG::PWM_DUTY); +} + +void CLCD::turn_on_backlight (void) { + mem_write_8(REG::PWM_DUTY, 128); +} + +void CLCD::FontMetrics::load(const uint8_t font) { + uint32_t rom_fontroot = mem_read_32(MAP::ROM_FONT_ADDR); + mem_read_bulk(rom_fontroot + 148 * (font - 16), (uint8_t*) this, 148); +} + +uint16_t CLCD::FontMetrics::get_text_width(const char *str, size_t n) const { + uint16_t width = 0; + const uint8_t *p = (const uint8_t *) str; + for(;;) { + const uint8_t val = *p++; n--; + if (!val || n == 0) break; + width += val < 128 ? char_widths[val] : 0; + } + return width; +} + +uint16_t CLCD::FontMetrics::get_text_width_P(const char *str, size_t n) const { + uint16_t width = 0; + const uint8_t *p = (const uint8_t *) str; + for(;;) { + const uint8_t val = pgm_read_byte(p++); n--; + if (!val || n == 0) break; + width += val < 128 ? char_widths[val] : 0; + } + return width; +} + +/************************** HOST COMMAND FUNCTION *********************************/ + +void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) { // Sends 24-Bit Host Command to LCD + if (host_command != ACTIVE) { + host_command |= 0x40; + } + spi_ftdi_select(); + spi_send(host_command); + spi_send(byte2); + spi_send(0x00); + spi_ftdi_deselect(); +} + +/************************** MEMORY READ FUNCTIONS *********************************/ + +void CLCD::spi_read_addr (uint32_t reg_address) { + spi_send((reg_address >> 16) & 0x3F); // Address [21:16] + spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8] + spi_send((reg_address >> 0) & 0xFF); // Address [7:0] + spi_send(0x00); // Dummy Byte +} + +// Write 4-Byte Address, Read Multiple Bytes +void CLCD::mem_read_bulk (uint32_t reg_address, uint8_t *data, uint16_t len) { + spi_ftdi_select(); + spi_read_addr(reg_address); + spi_read_bulk (data, len); + spi_ftdi_deselect(); +} + +// Write 4-Byte Address, Read 1-Byte Data +uint8_t CLCD::mem_read_8 (uint32_t reg_address) { + spi_ftdi_select(); + spi_read_addr(reg_address); + uint8_t r_data = spi_read_8(); + spi_ftdi_deselect(); + return r_data; +} + +// Write 4-Byte Address, Read 2-Bytes Data +uint16_t CLCD::mem_read_16 (uint32_t reg_address) { + using namespace SPI::least_significant_byte_first; + spi_ftdi_select(); + spi_read_addr(reg_address); + uint16_t r_data = spi_read_16(); + spi_ftdi_deselect(); + return r_data; +} + +// Write 4-Byte Address, Read 4-Bytes Data +uint32_t CLCD::mem_read_32 (uint32_t reg_address) { + using namespace SPI::least_significant_byte_first; + spi_ftdi_select(); + spi_read_addr(reg_address); + uint32_t r_data = spi_read_32(); + spi_ftdi_deselect(); + return r_data; +} + +/************************** MEMORY WRITE FUNCTIONS *********************************/ + +// Generic operations for transforming a byte, for use with _mem_write_bulk: +static inline uint8_t reverse_byte(uint8_t a) { + return ((a & 0x1) << 7) | ((a & 0x2) << 5) | + ((a & 0x4) << 3) | ((a & 0x8) << 1) | + ((a & 0x10) >> 1) | ((a & 0x20) >> 3) | + ((a & 0x40) >> 5) | ((a & 0x80) >> 7); +} +static inline uint8_t xbm_write(const uint8_t *p) {return reverse_byte(pgm_read_byte(p));} + +void CLCD::spi_write_addr (uint32_t reg_address) { + spi_send((reg_address >> 16) | 0x80); // Address [21:16] + spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8] + spi_send((reg_address >> 0) & 0xFF); // Address [7:0] +} + +// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from RAM +void CLCD::mem_write_bulk (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) { + spi_ftdi_select(); + spi_write_addr(reg_address); + spi_write_bulk(data, len, padding); + spi_ftdi_deselect(); +} + +// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM +void CLCD::mem_write_bulk (uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding) { + spi_ftdi_select(); + spi_write_addr(reg_address); + spi_write_bulk(str, len, padding); + spi_ftdi_deselect(); +} + + // Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM +void CLCD::mem_write_pgm (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) { + spi_ftdi_select(); + spi_write_addr(reg_address); + spi_write_bulk(data, len, padding); + spi_ftdi_deselect(); +} + +// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM, reversing bytes (suitable for loading XBM images) +void CLCD::mem_write_xbm (uint32_t reg_address, progmem_str data, uint16_t len, uint8_t padding) { + spi_ftdi_select(); + spi_write_addr(reg_address); + spi_write_bulk(data, len, padding); + spi_ftdi_deselect(); +} + +// Write 3-Byte Address, Write 1-Byte Data +void CLCD::mem_write_8 (uint32_t reg_address, uint8_t data) { + spi_ftdi_select(); + spi_write_addr(reg_address); + spi_write_8(data); + spi_ftdi_deselect(); +} + +// Write 3-Byte Address, Write 2-Bytes Data +void CLCD::mem_write_16 (uint32_t reg_address, uint16_t data) { + using namespace SPI::least_significant_byte_first; + spi_ftdi_select(); + spi_write_addr(reg_address); + spi_write_32(data); + spi_ftdi_deselect(); +} + +// Write 3-Byte Address, Write 4-Bytes Data +void CLCD::mem_write_32 (uint32_t reg_address, uint32_t data) { + using namespace SPI::least_significant_byte_first; + spi_ftdi_select(); + spi_write_addr(reg_address); + spi_write_32(data); + spi_ftdi_deselect(); +} + +/******************* FT800/810 Co-processor Commands *********************************/ + +#if FTDI_API_LEVEL == 800 +uint32_t CLCD::CommandFifo::command_write_ptr = 0xFFFFFFFFul; +#endif + +void CLCD::CommandFifo::cmd(uint32_t cmd32) { + write((void*)&cmd32, sizeof(uint32_t)); +} + +void CLCD::CommandFifo::cmd(void* data, uint16_t len) { + write(data, len); +} + +void CLCD::CommandFifo::bgcolor(uint32_t rgb) { + cmd(CMD_BGCOLOR); + cmd(rgb); +} + +void CLCD::CommandFifo::fgcolor(uint32_t rgb) { + cmd(CMD_FGCOLOR); + cmd(rgb); +} + +void CLCD::CommandFifo::gradcolor(uint32_t rgb) { + cmd(CMD_GRADCOLOR); + cmd(rgb); +} + +// This sends the a text command to the command preprocessor, must be followed by str() +void CLCD::CommandFifo::button(int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t option) { + struct { + int32_t type = CMD_BUTTON; + int16_t x; + int16_t y; + int16_t w; + int16_t h; + int16_t font; + uint16_t option; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.w = w; + cmd_data.h = h; + cmd_data.font = font; + cmd_data.option = option; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +// This sends the a text command to the command preprocessor, must be followed by str() +void CLCD::CommandFifo::text(int16_t x, int16_t y, int16_t font, uint16_t options) { + struct { + int32_t type = CMD_TEXT; + int16_t x; + int16_t y; + int16_t font; + uint16_t options; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.font = font; + cmd_data.options = options; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +// This sends the a toggle command to the command preprocessor, must be followed by str() +void CLCD::CommandFifo::toggle (int16_t x, int16_t y, int16_t w, int16_t font, uint16_t options, bool state) { + struct { + int32_t type = CMD_TOGGLE; + int16_t x; + int16_t y; + int16_t w; + int16_t font; + uint16_t options; + uint16_t state; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.w = w; + cmd_data.font = font; + cmd_data.options = options; + cmd_data.state = state ? 65535 : 0; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +// This sends the a keys command to the command preprocessor, must be followed by str() +void CLCD::CommandFifo::keys (int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t options) { + struct { + int32_t type = CMD_KEYS; + int16_t x; + int16_t y; + int16_t w; + int16_t h; + int16_t font; + uint16_t options; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.w = w; + cmd_data.h = h; + cmd_data.font = font; + cmd_data.options = options; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::clock (int16_t x, int16_t y, int16_t r, uint16_t options, int16_t h, int16_t m, int16_t s, int16_t ms) +{ + struct { + int32_t type = CMD_CLOCK; + int16_t x; + int16_t y; + int16_t r; + uint16_t options; + int16_t h; + int16_t m; + int16_t s; + int16_t ms; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.r = r; + cmd_data.options = options; + cmd_data.h = h; + cmd_data.m = m; + cmd_data.s = s; + cmd_data.ms = ms; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::gauge (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t major, uint16_t minor, uint16_t val, uint16_t range) +{ + struct { + int32_t type = CMD_GAUGE; + int16_t x; + int16_t y; + int16_t r; + uint16_t options; + uint16_t major; + uint16_t minor; + uint16_t val; + uint16_t range; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.r = r; + cmd_data.options = options; + cmd_data.major = major; + cmd_data.minor = minor; + cmd_data.val = val; + cmd_data.range = range; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::dial (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t val) +{ + struct { + int32_t type = CMD_DIAL; + int16_t x; + int16_t y; + int16_t r; + uint16_t options; + uint16_t val; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.r = r; + cmd_data.options = options; + cmd_data.val = val; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::scrollbar (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t size, uint16_t range) { + struct { + int32_t type = CMD_SCROLLBAR; + int16_t x; + int16_t y; + int16_t w; + uint16_t h; + uint16_t options; + uint16_t val; + uint16_t size; + uint16_t range; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.w = w; + cmd_data.h = h; + cmd_data.options = options; + cmd_data.val = val; + cmd_data.size = size; + cmd_data.range = range; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::progress (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) { + struct { + int32_t type = CMD_PROGRESS; + int16_t x; + int16_t y; + int16_t w; + int16_t h; + uint16_t options; + uint16_t val; + uint16_t range; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.w = w; + cmd_data.h = h; + cmd_data.options = options; + cmd_data.val = val; + cmd_data.range = range; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::slider (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) { + struct { + int32_t type = CMD_SLIDER; + int16_t x; + int16_t y; + int16_t w; + int16_t h; + uint16_t options; + uint16_t val; + uint16_t range; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.w = w; + cmd_data.h = h; + cmd_data.options = options; + cmd_data.val = val; + cmd_data.range = range; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::gradient (int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1) { + struct { + int32_t type = CMD_GRADIENT; + int16_t x0; + int16_t y0; + uint32_t rgb0; + int16_t x1; + int16_t y1; + uint32_t rgb1; + } cmd_data; + + cmd_data.x0 = x0; + cmd_data.y0 = y0; + cmd_data.rgb0 = rgb0; + cmd_data.x1 = x1; + cmd_data.y1 = y1; + cmd_data.rgb1 = rgb1; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::number (int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n) { + struct { + int32_t type = CMD_NUMBER; + int16_t x; + int16_t y; + int16_t font; + uint16_t options; + int16_t n; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.font = font; + cmd_data.options = options; + cmd_data.n = n; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::memzero (uint32_t ptr, uint32_t size) { + struct { + uint32_t type = CMD_MEMZERO; + uint32_t ptr; + uint32_t size; + } cmd_data; + + cmd_data.ptr = ptr; + cmd_data.size = size; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::memset (uint32_t ptr, uint32_t val, uint32_t size) { + struct { + uint32_t type = CMD_MEMSET; + uint32_t ptr; + uint32_t val; + uint32_t size; + } cmd_data; + + cmd_data.ptr = ptr; + cmd_data.val = val; + cmd_data.size = size; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::memcpy (uint32_t dst, uint32_t src, uint32_t size) { + struct { + uint32_t type = CMD_MEMCPY; + uint32_t dst; + uint32_t src; + uint32_t size; + } cmd_data; + + cmd_data.dst = dst; + cmd_data.src = src; + cmd_data.size = size; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::memcrc (uint32_t ptr, uint32_t num, uint32_t result) { + struct { + uint32_t type = CMD_MEMCRC; + uint32_t ptr; + uint32_t num; + uint32_t result; + } cmd_data; + + cmd_data.ptr = ptr; + cmd_data.num = num; + cmd_data.result = result; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::memwrite (uint32_t ptr, uint32_t value) { + struct { + uint32_t type = CMD_MEMWRITE; + uint32_t ptr; + uint32_t num; + uint32_t value; + } cmd_data; + + cmd_data.ptr = ptr; + cmd_data.num = 4; + cmd_data.value = value; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::append (uint32_t ptr, uint32_t size) { + struct { + uint32_t type = CMD_APPEND; + uint32_t ptr; + uint32_t size; + } cmd_data; + + cmd_data.ptr = ptr; + cmd_data.size = size; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::inflate (uint32_t ptr) { + struct { + uint32_t type = CMD_INFLATE; + uint32_t ptr; + } cmd_data; + + cmd_data.ptr = ptr; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::getptr (uint32_t result) { + struct { + uint32_t type = CMD_GETPTR; + uint32_t result; + } cmd_data; + + cmd_data.result = result; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::track(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t tag) { + struct { + uint32_t type = CMD_TRACK; + int16_t x; + int16_t y; + int16_t w; + int16_t h; + int16_t tag; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.w = w; + cmd_data.h = h; + cmd_data.tag = tag; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::sketch(int16_t x, int16_t y, uint16_t w, uint16_t h, uint32_t ptr, uint16_t format) { + struct { + uint32_t type = CMD_SKETCH; + int16_t x; + int16_t y; + uint16_t w; + uint16_t h; + uint32_t ptr; + uint16_t format; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.w = w; + cmd_data.h = h; + cmd_data.ptr = ptr; + cmd_data.format = format; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::snapshot(uint32_t ptr) { + struct { + uint32_t type = CMD_SNAPSHOT; + uint32_t ptr; + } cmd_data; + + cmd_data.ptr = ptr; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::spinner(int16_t x, int16_t y, uint16_t style, uint16_t scale) { + struct { + uint32_t type = CMD_SPINNER; + uint16_t x; + uint16_t y; + uint16_t style; + uint16_t scale; + } cmd_data; + + cmd_data.x = x; + cmd_data.y = y; + cmd_data.style = style; + cmd_data.scale = scale; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::loadimage(uint32_t ptr, uint32_t options) { + struct { + uint32_t type = CMD_LOADIMAGE; + uint32_t ptr; + uint32_t options; + } cmd_data; + + cmd_data.ptr = ptr; + cmd_data.options = options; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::getprops (uint32_t ptr, uint32_t width, uint32_t height) { + struct { + uint32_t type = CMD_GETPROPS; + uint32_t ptr; + uint32_t width; + uint32_t height; + } cmd_data; + + cmd_data.ptr = ptr; + cmd_data.width = width; + cmd_data.height = height; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::scale(int32_t sx, int32_t sy) { + struct { + uint32_t type = CMD_SCALE; + int32_t sx; + int32_t sy; + } cmd_data; + + cmd_data.sx = sx; + cmd_data.sy = sy; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::rotate(int32_t a) { + struct { + uint32_t type = CMD_ROTATE; + int32_t a; + } cmd_data; + + cmd_data.a = a; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +void CLCD::CommandFifo::translate (int32_t tx, int32_t ty) { + struct { + uint32_t type = CMD_TRANSLATE; + int32_t tx; + int32_t ty; + } cmd_data; + + cmd_data.tx = tx; + cmd_data.ty = ty; + + cmd( &cmd_data, sizeof(cmd_data) ); +} + +#if FTDI_API_LEVEL >= 810 +void CLCD::CommandFifo::setbase (uint8_t base) { + struct { + int32_t type = CMD_SETBASE; + uint32_t base; + } cmd_data; + + cmd_data.base = base; + + cmd( &cmd_data, sizeof(cmd_data) ); +} +#endif + +#if FTDI_API_LEVEL >= 810 +void CLCD::CommandFifo::setbitmap(uint32_t addr, uint16_t fmt, uint16_t w, uint16_t h) { + struct { + uint32_t type = CMD_SETBITMAP; + uint32_t addr; + uint16_t fmt; + uint16_t w; + uint16_t h; + uint16_t dummy; + } cmd_data; + + cmd_data.addr = addr; + cmd_data.fmt = fmt; + cmd_data.w = w; + cmd_data.h = h; + cmd_data.dummy = 0; + + cmd( &cmd_data, sizeof(cmd_data) ); +} +#endif + +#if FTDI_API_LEVEL >= 810 +void CLCD::CommandFifo::snapshot2(uint32_t format, uint32_t ptr, int16_t x, int16_t y, uint16_t w, uint16_t h) { + struct { + uint32_t type = CMD_SNAPSHOT2; + uint32_t format; + uint32_t ptr; + int16_t x; + int16_t y; + uint16_t w; + uint16_t h; + } cmd_data; + + cmd_data.format = format; + cmd_data.ptr = ptr; + cmd_data.x = x; + cmd_data.y = y; + cmd_data.w = w; + cmd_data.h = h; + + cmd( &cmd_data, sizeof(cmd_data) ); +} +#endif + +#if FTDI_API_LEVEL >= 810 +void CLCD::CommandFifo::mediafifo(uint32_t ptr, uint32_t size) { + struct { + uint32_t type = CMD_MEDIAFIFO; + uint32_t ptr; + uint32_t size; + } cmd_data; + + cmd_data.ptr = ptr; + cmd_data.size = size; + + cmd( &cmd_data, sizeof(cmd_data) ); +} +#endif + +#if FTDI_API_LEVEL >= 810 +void CLCD::CommandFifo::videostart() { + cmd( CMD_VIDEOSTART ); +} +#endif + +#if FTDI_API_LEVEL >= 810 +void CLCD::CommandFifo::videoframe(uint32_t dst, uint32_t ptr) { + struct { + uint32_t type = CMD_VIDEOFRAME; + uint32_t dst; + uint32_t ptr; + } cmd_data; + + cmd_data.dst = dst; + cmd_data.ptr = ptr; + + cmd( &cmd_data, sizeof(cmd_data) ); +} +#endif + +#if FTDI_API_LEVEL >= 810 +void CLCD::CommandFifo::playvideo(uint32_t options) { + struct { + uint32_t type = CMD_PLAYVIDEO; + uint32_t options; + } cmd_data; + + cmd_data.options = options; + + cmd( &cmd_data, sizeof(cmd_data) ); +} +#endif + +#if FTDI_API_LEVEL >= 810 +void CLCD::CommandFifo::setrotate (uint8_t rotation) { + struct { + uint32_t type = CMD_SETROTATE; + uint32_t rotation; + } cmd_data; + + cmd_data.rotation = rotation; + + cmd( &cmd_data, sizeof(cmd_data) ); +} +#endif + +/**************************** FT800/810 Co-Processor Command FIFO ****************************/ + +bool CLCD::CommandFifo::is_processing() { + return (mem_read_32(REG::CMD_READ) & 0x0FFF) != (mem_read_32(REG::CMD_WRITE) & 0x0FFF); +} + +bool CLCD::CommandFifo::has_fault() { + uint16_t Cmd_Read_Reg = mem_read_32(REG::CMD_READ) & 0x0FFF; + return Cmd_Read_Reg == 0x0FFF; +} + +#if FTDI_API_LEVEL == 800 +void CLCD::CommandFifo::start() { + if (command_write_ptr == 0xFFFFFFFFul) { + command_write_ptr = mem_read_32(REG::CMD_WRITE) & 0x0FFF; + } +} + +void CLCD::CommandFifo::execute() { + if (command_write_ptr != 0xFFFFFFFFul) { + mem_write_32(REG::CMD_WRITE, command_write_ptr); + } +} + +void CLCD::CommandFifo::reset() { + safe_delay(100); + mem_write_32(REG::CPURESET, 0x00000001); + mem_write_32(REG::CMD_WRITE, 0x00000000); + mem_write_32(REG::CMD_READ, 0x00000000); + mem_write_32(REG::CPURESET, 0x00000000); + safe_delay(300); + command_write_ptr = 0xFFFFFFFFul; +}; + +template bool CLCD::CommandFifo::_write_unaligned(T data, uint16_t len) { + const char *ptr = (const char*)data; + uint32_t bytes_tail, bytes_head; + uint32_t command_read_ptr; + + #ifdef UI_FRAMEWORK_DEBUG + if (command_write_ptr == 0xFFFFFFFFul) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Attempt to write to FIFO before CommandFifo::Cmd_Start()."); + } + #endif + + /* Wait until there is enough space in the circular buffer for the transfer */ + do { + command_read_ptr = mem_read_32(REG::CMD_READ) & 0x0FFF; + if (command_read_ptr <= command_write_ptr) { + bytes_tail = 4096U - command_write_ptr; + bytes_head = command_read_ptr; + } else { + bytes_tail = command_read_ptr - command_write_ptr; + bytes_head = 0; + } + // Check for faults which can lock up the command processor + if (has_fault()) { + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHOLNPGM("Fault waiting for space in the command processor"); + #endif + return false; + } + } while ((bytes_tail + bytes_head) < len); + + /* Write as many bytes as possible following REG::CMD_WRITE */ + uint16_t bytes_to_write = min(len, bytes_tail); + mem_write_bulk (MAP::RAM_CMD + command_write_ptr, T(ptr), bytes_to_write); + command_write_ptr += bytes_to_write; + ptr += bytes_to_write; + len -= bytes_to_write; + + if (len > 0) { + /* Write remaining bytes at start of circular buffer */ + mem_write_bulk (MAP::RAM_CMD, T(ptr), len); + command_write_ptr = len; + } + + if (command_write_ptr == 4096U) { + command_write_ptr = 0; + } + return true; +} + +// Writes len bytes into the FIFO, if len is not +// divisible by four, zero bytes will be written +// to align to the boundary. + +template bool CLCD::CommandFifo::write(T data, uint16_t len) { + const uint8_t padding = MULTIPLE_OF_4(len) - len; + + uint8_t pad_bytes[] = {0, 0, 0, 0}; + return _write_unaligned(data, len) && + _write_unaligned(pad_bytes, padding); +} +#else +void CLCD::CommandFifo::start() { +} + +void CLCD::CommandFifo::execute() { +} + +void CLCD::CommandFifo::reset() { + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHOLNPGM("Resetting command processor"); + #endif + safe_delay(100); + mem_write_32(REG::CPURESET, 0x00000001); + mem_write_32(REG::CMD_WRITE, 0x00000000); + mem_write_32(REG::CMD_READ, 0x00000000); + mem_write_32(REG::CPURESET, 0x00000000); + safe_delay(300); +}; + +// Writes len bytes into the FIFO, if len is not +// divisible by four, zero bytes will be written +// to align to the boundary. + +template bool CLCD::CommandFifo::write(T data, uint16_t len) { + const uint8_t padding = MULTIPLE_OF_4(len) - len; + + if (has_fault()) { + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHOLNPGM("Faulted... ignoring write."); + #endif + return false; + } + // The FT810 provides a special register that can be used + // for writing data without us having to do our own FIFO + // management. + uint16_t Command_Space = mem_read_32(REG::CMDB_SPACE) & 0x0FFF; + if (Command_Space < (len + padding)) { + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Waiting for ", len + padding); + SERIAL_ECHOPAIR(" bytes in command queue, now free: ", Command_Space); + #endif + do { + Command_Space = mem_read_32(REG::CMDB_SPACE) & 0x0FFF; + if (has_fault()) { + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHOLNPGM("... fault"); + #endif + return false; + } + } while (Command_Space < len + padding); + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHOLNPGM("... done"); + #endif + } + mem_write_bulk(REG::CMDB_WRITE, data, len, padding); + return true; +} +#endif + +template bool CLCD::CommandFifo::write(const void*, uint16_t); +template bool CLCD::CommandFifo::write(progmem_str, uint16_t); + +// CO_PROCESSOR COMMANDS + +void CLCD::CommandFifo::str (const char * data) { + write(data, strlen(data)+1); +} + +void CLCD::CommandFifo::str (progmem_str data) { + write(data, strlen_P((const char*)data)+1); +} + +/******************* LCD INITIALIZATION ************************/ + +void CLCD::init (void) { + spi_init(); // Set Up I/O Lines for SPI and FT800/810 Control + ftdi_reset(); // Power down/up the FT8xx with the apropriate delays + + if (Use_Crystal == 1) { + host_cmd(CLKEXT, 0); + } + else { + host_cmd(CLKINT, 0); + } + + host_cmd(ACTIVE, 0); // Activate the System Clock + + /* read the device-id until it returns 0x7c or times out, should take less than 150ms */ + uint8_t counter; + for(counter = 0; counter < 250; counter++) { + uint8_t device_id = mem_read_8(REG::ID); // Read Device ID, Should Be 0x7C; + if (device_id == 0x7c) { + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("FTDI chip initialized "); + #endif + break; + } + else { + delay(1); + } + if (counter == 249) { + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("Timeout waiting for device ID, should be 124, got ", device_id); + #endif + } + } + + mem_write_8(REG::PWM_DUTY, 0); // turn off Backlight, Frequency already is set to 250Hz default + + /* Configure the FT8xx Registers */ + mem_write_16(REG::HCYCLE, FTDI::Hcycle); + mem_write_16(REG::HOFFSET, FTDI::Hoffset); + mem_write_16(REG::HSYNC0, FTDI::Hsync0); + mem_write_16(REG::HSYNC1, FTDI::Hsync1); + mem_write_16(REG::VCYCLE, FTDI::Vcycle); + mem_write_16(REG::VOFFSET, FTDI::Voffset); + mem_write_16(REG::VSYNC0, FTDI::Vsync0); + mem_write_16(REG::VSYNC1, FTDI::Vsync1); + mem_write_16(REG::HSIZE, FTDI::Hsize); + mem_write_16(REG::VSIZE, FTDI::Vsize); + mem_write_8(REG::SWIZZLE, FTDI::Swizzle); + mem_write_8(REG::PCLK_POL, FTDI::Pclkpol); + mem_write_8(REG::CSPREAD, FTDI::CSpread); + + /* write a basic display-list to get things started */ + mem_write_32(MAP::RAM_DL, DL::CLEAR_COLOR_RGB); + mem_write_32(MAP::RAM_DL + 4, (DL::CLEAR | 0x07)); /* clear color, stencil and tag buffer */ + mem_write_32(MAP::RAM_DL + 8, DL::DL_DISPLAY); /* end of display list */ + + mem_write_8(REG::DLSWAP, 0x02); // activate display list, Bad Magic Cookie 2 = switch to new list after current frame is scanned out + + //mem_write_8(REG::TOUCH_MODE, 0x03); // Configure the Touch Screen, Bad Magic Cookie, 3 = CONTINUOUS = Reset Default + //mem_write_8(REG::TOUCH_ADC_MODE, 0x01); // Bad Magic Cookie, 1 = single touch = Reset Default + //mem_write_8(REG::TOUCH_OVERSAMPLE, 0x0F); // Reset Default = 7 - why 15? + mem_write_16(REG::TOUCH_RZTHRESH, touch_threshold); /* setup touch sensitivity */ + mem_write_8(REG::VOL_SOUND, 0x00); // Turn Synthesizer Volume Off + + /* turn on the display by setting DISP high */ + /* turn on the Audio Amplifier by setting GPIO_1 high for the select few modules supporting this */ + /* no need to use GPIOX here since DISP/GPIO_0 and GPIO_1 are on REG::GPIO for FT81x as well */ + if (GPIO_1_Audio_Shutdown) { + mem_write_8(REG::GPIO_DIR, GPIO_DISP | GPIO_GP1); + mem_write_8(REG::GPIO, GPIO_DISP | GPIO_GP1); + } else if (GPIO_0_Audio_Enable) { + mem_write_8(REG::GPIO_DIR, GPIO_DISP | GPIO_GP0); + mem_write_8(REG::GPIO, GPIO_DISP | GPIO_GP0); + } + else { + mem_write_8(REG::GPIO, GPIO_DISP); /* REG::GPIO_DIR is set to output for GPIO_DISP by default */ + } + + mem_write_8(REG::PCLK, Pclk); // Turns on Clock by setting PCLK Register to the value necessary for the module + + mem_write_16(REG::PWM_HZ, 0x00FA); + + // Turning off dithering seems to help prevent horizontal line artifacts on certain colors + mem_write_8(REG::DITHER, 0); + + // Initialize the command FIFO + CommandFifo::reset(); + + default_touch_transform(); + default_display_orientation(); +} + +void CLCD::default_touch_transform() { + // Set Initial Values for Touch Transform Registers + mem_write_32(REG::ROTATE, 0); + mem_write_32(REG::TOUCH_TRANSFORM_A, FTDI::default_transform_a); + mem_write_32(REG::TOUCH_TRANSFORM_B, FTDI::default_transform_b); + mem_write_32(REG::TOUCH_TRANSFORM_C, FTDI::default_transform_c); + mem_write_32(REG::TOUCH_TRANSFORM_D, FTDI::default_transform_d); + mem_write_32(REG::TOUCH_TRANSFORM_E, FTDI::default_transform_e); + mem_write_32(REG::TOUCH_TRANSFORM_F, FTDI::default_transform_f); +} + +void CLCD::default_display_orientation() { + #if FTDI_API_LEVEL >= 810 + // Set the initial display orientation. On the FT810, we use the command + // processor to do this since it will also update the transform matrices. + if (FTDI::ftdi_chip >= 810) { + CommandFifo cmd; + cmd.setrotate(0 + #if ENABLED(TOUCH_UI_MIRRORED) + + 4 + #endif + #if ENABLED(TOUCH_UI_PORTRAIT) + + 2 + #endif + #if ENABLED(TOUCH_UI_INVERTED) + + 1 + #endif + ); + cmd.execute(); + } + else { + #if ENABLED(TOUCH_UI_INVERTED) + mem_write_32(REG::ROTATE, 1); + #endif + } + #elif ANY(TOUCH_UI_PORTRAIT, TOUCH_UI_MIRRORED) + #error PORTRAIT or MIRRORED orientation not supported on the FT800 + #elif ENABLED(TOUCH_UI_INVERTED) + mem_write_32(REG::ROTATE, 1); + #endif +} + +#endif // FTDI_BASIC diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.h new file mode 100644 index 000000000..f78dd4576 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.h @@ -0,0 +1,258 @@ +/**************** + * commands.cpp * + ****************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + + /**************************************************************************** + * FUNCTION MAP * + * * + * SPI and FT800/810 Commands * + * * + * CLCD::spi_select() Set CS line to 0 * + * CLCD::spi_deselect() Set CS Line to 1 * + * CLCD::reset() Toggle FT800/810 Power Down Line 50 ms * + * CLCD::spi_init() Configure I/O Lines for SPI * + * CLCD::spi_transfer() Send/Receive 1 SPI Byte * + * CLCD::init() Set FT800/810 Registers * + * CLCD::enable() Turn On FT800/810 PCLK * + * CLCD::disable() Turn Off FT8880/810 PCLK * + * CLCD::set_backlight() Set LCD Backlight Level * + * * + * MEMORY READ FUNCTIONS * + * * + * CLCD::mem_read_addr() Send 32-Bit Address * + * CLCD::mem_read_8() Read 1 Byte * + * CLCD::mem_read_16() Read 2 Bytes * + * CLCD::mem_read_32() Read 4 Bytes * + * * + * MEMORY WRITE FUNCTIONS * + * * + * CLCD::mem_write_addr() Send 24-Bit Address * + * CLCD::mem_write_8() Write 1 Byte * + * CLCD::mem_write_16() Write 2 Bytes * + * CLCD::mem_write_32() Write 4 Bytes * + * * + * HOST COMMAND FUNCTION * + * * + * CLCD::host_cmd() Send 24-Bit Host Command * + * * + * COMMAND BUFFER FUNCTIONS * + * * + * CLCD::cmd() Send 32-Bit Value(4 Bytes)CMD Buffer * + * CLCD::cmd() Send Data Structure with 32-Bit Cmd * + * CLCD::str() Send Text String in 32-Bit Multiples * + + * * + * FT800/810 GRAPHIC COMMANDS * + * * + * class CLCD:CommandFifo {} Class to control Cmd FIFO * + + * CommandFifo::start() Wait for CP finish - Set FIFO Ptr * + * CommandFifo::execute() Set REG_CMD_WRITE and start CP * + * CommandFifo::reset() Set Cmd Buffer Pointers to 0 * + * + * CommandFifo::fgcolor Set Graphic Item Foreground Color * + * CommandFifo::bgcolor Set Graphic Item Background Color * + * CommandFifo::begin() Begin Drawing a Primative * + * CommandFifo::mem_copy() Copy a Block of Memory * + * CommandFifo::append() Append Commands to Current DL * + * CommandFifo::gradient_color() Set 3D Button Highlight Color * + * CommandFifo::button() Draw Button with Bulk Write * + * CommandFifo::text() Draw Text with Bulk Write * + *****************************************************************************/ + + /************************************************** + * RAM_G Graphics RAM Allocation * + * * + * Address Use * + * * + * 8000 Extruder Bitmap * + * 8100 Bed Heat Bitmap * + * 8200 Fan Bitmap * + * 8300 Thumb Drive Symbol Bitmap * + * 35000 Static DL Space (FT800) * + * F5000 Static DL Space (FT810) * + **************************************************/ + +#pragma once + +typedef const __FlashStringHelper *progmem_str; + +class UIStorage; + +class CLCD { + friend class UIStorage; + + public: + typedef FTDI::ftdi_registers REG; + typedef FTDI::ftdi_memory_map MAP; + + static void spi_write_addr (uint32_t reg_address); + static void spi_read_addr (uint32_t reg_address); + + static uint8_t mem_read_8 (uint32_t reg_address); + static uint16_t mem_read_16 (uint32_t reg_address); + static uint32_t mem_read_32 (uint32_t reg_address); + static void mem_read_bulk (uint32_t reg_address, uint8_t *data, uint16_t len); + + static void mem_write_8 (uint32_t reg_address, uint8_t w_data); + static void mem_write_16 (uint32_t reg_address, uint16_t w_data); + static void mem_write_32 (uint32_t reg_address, uint32_t w_data); + static void mem_write_bulk (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding = 0); + static void mem_write_pgm (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding = 0); + static void mem_write_bulk (uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding = 0); + static void mem_write_xbm (uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding = 0); + + public: + class CommandFifo; + class FontMetrics; + + static void init (void); + static void default_touch_transform (void); + static void default_display_orientation (void); + static void turn_on_backlight (void); + static void enable (void); + static void disable (void); + static void set_brightness (uint8_t brightness); + static uint8_t get_brightness(); + static void host_cmd (unsigned char host_command, unsigned char byte2); + + static void get_font_metrics (uint8_t font, struct FontMetrics &fm); + static uint16_t get_text_width(const uint8_t font, const char *str); + static uint16_t get_text_width_P(const uint8_t font, const char *str); + + static uint8_t get_tag () {return mem_read_8(REG::TOUCH_TAG);} + static bool is_touching () {return (mem_read_32(REG::TOUCH_DIRECT_XY) & 0x80000000) == 0;} + + static uint8_t get_tracker (uint16_t &value) { + uint32_t tracker = mem_read_32(REG::TRACKER); + value = tracker >> 16; + return tracker & 0xFF; + } +}; + +/*************************** FT800/810 Font Metrics ****************************/ + +class CLCD::FontMetrics { + public: + uint8_t char_widths[128]; + uint32_t format; + uint32_t stride; + uint32_t width; + uint32_t height; + uint32_t ptr; + + FontMetrics(uint8_t font) {load(font);} + + void load(uint8_t font); + + // Returns width of string, up to a maximum of n characters. + uint16_t get_text_width(const char *str, size_t n = SIZE_MAX) const; + uint16_t get_text_width_P(const char *str, size_t n = SIZE_MAX) const; +}; + +/******************* FT800/810 Graphic Commands *********************************/ + +class CLCD::CommandFifo { + protected: + #if FTDI_API_LEVEL >= 810 + uint32_t getRegCmdBSpace(); + #else + static uint32_t command_write_ptr; + template bool _write_unaligned(T data, uint16_t len); + #endif + void start(void); + + public: + template bool write(T data, uint16_t len); + + public: + CommandFifo() {start();} + + static void reset (void); + static bool is_processing(); + static bool has_fault(); + + void execute(void); + + void cmd(uint32_t cmd32); + void cmd(void* data, uint16_t len); + + void dlstart() {cmd(FTDI::CMD_DLSTART);} + void swap() {cmd(FTDI::CMD_SWAP);} + void coldstart() {cmd(FTDI::CMD_COLDSTART);} + void screensaver() {cmd(FTDI::CMD_SCREENSAVER);} + void stop() {cmd(FTDI::CMD_STOP);} + void loadidentity() {cmd(FTDI::CMD_LOADIDENTITY);} + void setmatrix() {cmd(FTDI::CMD_SETMATRIX);} + + void fgcolor (uint32_t rgb); + void bgcolor (uint32_t rgb); + void gradcolor (uint32_t rgb); + + void track (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t tag); + void clock (int16_t x, int16_t y, int16_t r, uint16_t options, int16_t h, int16_t m, int16_t s, int16_t ms); + void gauge (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t major, uint16_t minor, uint16_t val, uint16_t range); + void dial (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t val); + void slider (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range); + void progress (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range); + void scrollbar (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t size, uint16_t range); + void number (int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n); + void spinner (int16_t x, int16_t y, uint16_t style, uint16_t scale); + void sketch (int16_t x, int16_t y, uint16_t w, uint16_t h, uint32_t ptr, uint16_t format); + void gradient (int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1); + void snapshot (uint32_t ptr); + void loadimage (uint32_t ptr, uint32_t options); + void getprops (uint32_t ptr, uint32_t width, uint32_t height); + + void scale (int32_t sx, int32_t sy); + void rotate (int32_t a); + void translate (int32_t tx, int32_t ty); + + #if FTDI_API_LEVEL >= 810 + void setbase (uint8_t base); + void setrotate (uint8_t rotation); + void setbitmap (uint32_t ptr, uint16_t fmt, uint16_t w, uint16_t h); + void snapshot2 (uint32_t fmt, uint32_t ptr, int16_t x, int16_t y, uint16_t w, uint16_t h); + void mediafifo (uint32_t ptr, uint32_t size); + void playvideo (uint32_t options); + void videostart(); + void videoframe(uint32_t dst, uint32_t ptr); + #endif + + // All the following must be followed by str() + void text (int16_t x, int16_t y, int16_t font, uint16_t options); + void button (int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t option); + void toggle (int16_t x, int16_t y, int16_t w, int16_t font, uint16_t options, bool state); + void keys (int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t options); + + // Sends the string portion of text, button, toggle and keys. + void str (const char * data); + void str (progmem_str data); + + void memzero (uint32_t ptr, uint32_t size); + void memset (uint32_t ptr, uint32_t value, uint32_t size); + void memcpy (uint32_t dst, uint32_t src, uint32_t size); + void memcrc (uint32_t ptr, uint32_t num, uint32_t result); + void memwrite (uint32_t ptr, uint32_t value); + void inflate (uint32_t ptr); + void getptr (uint32_t result); + void append (uint32_t ptr, uint32_t size); +}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/constants.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/constants.h new file mode 100644 index 000000000..d8a0a20c0 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/constants.h @@ -0,0 +1,411 @@ +/*************** + * constants.h * + ***************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +/**************************************************************************** + * This header defines constants and commands for the FTDI FT810 LCD Driver * + * chip. * + ****************************************************************************/ + +#pragma once + +// OPTIONS + +namespace FTDI { + constexpr uint16_t OPT_3D = 0x0000; + constexpr uint16_t OPT_RGB565 = 0x0000; + constexpr uint16_t OPT_MONO = 0x0001; + constexpr uint16_t OPT_NODL = 0x0002; + constexpr uint16_t OPT_FLAT = 0x0100; + constexpr uint16_t OPT_SIGNED = 0x0100; + constexpr uint16_t OPT_CENTERX = 0x0200; + constexpr uint16_t OPT_CENTERY = 0x0400; + constexpr uint16_t OPT_CENTER = (OPT_CENTERX | OPT_CENTERY); + constexpr uint16_t OPT_RIGHTX = 0x0800; + constexpr uint16_t OPT_NOBACK = 0x1000; + constexpr uint16_t OPT_NOTICKS = 0x2000; + constexpr uint16_t OPT_NOHM = 0x4000; + constexpr uint16_t OPT_NOPOINTER = 0x4000; + constexpr uint16_t OPT_NOSECS = 0x8000; + constexpr uint16_t OPT_NOHANDS = (OPT_NOPOINTER | OPT_NOSECS); +} + +namespace FTDI_FT810 { + constexpr uint16_t OPT_NOTEAR = 0x0004; + constexpr uint16_t OPT_FULLSCREEN = 0x0008; + constexpr uint16_t OPT_MEDIAFIFO = 0x0010; + constexpr uint16_t OPT_SOUND = 0x0020; +} + +// GPIO Bits + +namespace FTDI { + constexpr uint8_t GPIO_GP0 = 1 << 0; + constexpr uint8_t GPIO_GP1 = 1 << 1; + constexpr uint8_t GPIO_DISP = 1 << 7; +} + +namespace FTDI_FT810 { + constexpr uint16_t GPIOX_GP0 = 1 << 0; + constexpr uint16_t GPIOX_GP1 = 1 << 1; + constexpr uint16_t GPIOX_DISP = 1 << 15; +} + +// HOST COMMANDS + +namespace FTDI { + constexpr uint8_t ACTIVE = 0x00; + constexpr uint8_t STANDBY = 0x41; + constexpr uint8_t SLEEP = 0x42; + constexpr uint8_t PWRDOWN = 0x50; + constexpr uint8_t CLKEXT = 0x44; + constexpr uint8_t CLKINT = 0x48; + constexpr uint8_t CORESET = 0x68; +} + +namespace FTDI_FT800 { + constexpr uint8_t CLK48M = 0x62; + constexpr uint8_t CLK36M = 0x61; +} + +namespace FTDI_FT810 { + constexpr uint8_t CLKSEL = 0x61; +} + +// DISPLAY LIST COMMANDS + +namespace FTDI { + constexpr uint8_t ARGB1555 = 0; + constexpr uint8_t L1 = 1; + constexpr uint8_t L4 = 2; + constexpr uint8_t L8 = 3; + constexpr uint8_t RGB332 = 4; + constexpr uint8_t ARGB2 = 5; + constexpr uint8_t ARGB4 = 6; + constexpr uint8_t RGB565 = 7; + constexpr uint8_t PALETTED = 8; + constexpr uint8_t TEXT8X8 = 9; + constexpr uint8_t TEXTVGA = 10; + constexpr uint8_t BARGRAPH = 11; + + constexpr uint8_t ALPHA_FUNC_NEVER = 0; + constexpr uint8_t ALPHA_FUNC_LESS = 1; + constexpr uint8_t ALPHA_FUNC_LEQUAL = 2; + constexpr uint8_t ALPHA_FUNC_GREATER = 3; + constexpr uint8_t ALPHA_FUNC_GEQUAL = 4; + constexpr uint8_t ALPHA_FUNC_EQUAL = 5; + constexpr uint8_t ALPHA_FUNC_NOTEQUAL = 6; + constexpr uint8_t ALPHA_FUNC_ALWAYS = 7; + + constexpr uint8_t NEAREST = 0; + constexpr uint8_t BILINEAR = 1; + constexpr uint8_t BORDER = 0; + constexpr uint8_t REPEAT = 1; + + constexpr uint8_t BLEND_FUNC_ZERO = 0; + constexpr uint8_t BLEND_FUNC_ONE = 1; + constexpr uint8_t BLEND_FUNC_SRC_ALPHA = 2; + constexpr uint8_t BLEND_FUNC_DST_ALPHA = 3; + constexpr uint8_t BLEND_FUNC_ONE_MINUS_SRC_ALPHA = 4; + constexpr uint8_t BLEND_FUNC_ONE_MINUS_DST_ALPHA = 5; + + constexpr uint32_t COLOR_MASK_RED = 8; + constexpr uint32_t COLOR_MASK_GRN = 4; + constexpr uint32_t COLOR_MASK_BLU = 2; + constexpr uint32_t COLOR_MASK_ALPHA = 1; + + constexpr uint8_t STENCIL_FUNC_NEVER = 0; + constexpr uint8_t STENCIL_FUNC_LESS = 1; + constexpr uint8_t STENCIL_FUNC_LEQUAL = 2; + constexpr uint8_t STENCIL_FUNC_GREATER = 3; + constexpr uint8_t STENCIL_FUNC_GEQUAL = 4; + constexpr uint8_t STENCIL_FUNC_EQUAL = 5; + constexpr uint8_t STENCIL_FUNC_NOTEQUAL = 6; + constexpr uint8_t STENCIL_FUNC_ALWAYS = 7; + + constexpr uint8_t STENCIL_OP_ZERO = 0; + constexpr uint8_t STENCIL_OP_KEEP = 1; + constexpr uint8_t STENCIL_OP_REPLACE = 2; + constexpr uint8_t STENCIL_OP_INCR = 3; + constexpr uint8_t STENCIL_OP_DECR = 4; + constexpr uint8_t STENCIL_OP_INVERT = 5; + + typedef enum: uint32_t { + BITMAPS = 1, + POINTS = 2, + LINES = 3, + LINE_STRIP = 4, + EDGE_STRIP_R = 5, + EDGE_STRIP_L = 6, + EDGE_STRIP_A = 7, + EDGE_STRIP_B = 8, + RECTS = 9 + } begin_t; +} + +namespace FTDI_FT800_DL { + constexpr uint32_t ALPHA_FUNC = 0x09000000; + constexpr uint32_t BEGIN = 0x1F000000; + constexpr uint32_t BITMAP_HANDLE = 0x05000000; + constexpr uint32_t BITMAP_LAYOUT = 0x07000000; + constexpr uint32_t BITMAP_SIZE = 0x08000000; + constexpr uint32_t BITMAP_SOURCE = 0x01000000; + constexpr uint32_t BITMAP_TRANSFORM_A = 0x15000000; + constexpr uint32_t BITMAP_TRANSFORM_B = 0x16000000; + constexpr uint32_t BITMAP_TRANSFORM_C = 0x17000000; + constexpr uint32_t BITMAP_TRANSFORM_D = 0x18000000; + constexpr uint32_t BITMAP_TRANSFORM_E = 0x19000000; + constexpr uint32_t BITMAP_TRANSFORM_F = 0x1A000000; + constexpr uint32_t BLEND_FUNC = 0x0B000000; + constexpr uint32_t CALL = 0x1D000000; + constexpr uint32_t CELL = 0x06000000; + constexpr uint32_t CLEAR = 0x26000000; + constexpr uint32_t CLEAR_COLOR_BUFFER = 0x00000004; + constexpr uint32_t CLEAR_STENCIL_BUFFER = 0x00000002; + constexpr uint32_t CLEAR_TAG_BUFFER = 0x00000001; + constexpr uint32_t CLEAR_COLOR_A = 0x0F000000; + constexpr uint32_t CLEAR_COLOR_RGB = 0x02000000; + constexpr uint32_t CLEAR_STENCIL = 0x11000000; + constexpr uint32_t CLEAR_TAG = 0x12000000; + constexpr uint32_t COLOR_A = 0x10000000; + constexpr uint32_t COLOR_MASK = 0x20000000; + constexpr uint32_t COLOR_RGB = 0x04000000; + constexpr uint32_t DL_DISPLAY = 0x00000000; + constexpr uint32_t END = 0x21000000; + constexpr uint32_t JUMP = 0x1E000000; + constexpr uint32_t LINE_WIDTH = 0x0E000000; + constexpr uint32_t MACRO = 0x25000000; + constexpr uint32_t POINT_SIZE = 0x0D000000; + constexpr uint32_t RESTORE_CONTEXT = 0x23000000; + constexpr uint32_t RETURN = 0x24000000; + constexpr uint32_t SAVE_CONTEXT = 0x22000000; + constexpr uint32_t SCISSOR_SIZE = 0x1C000000; + constexpr uint32_t SCISSOR_XY = 0x1B000000; + constexpr uint32_t STENCIL_FUNC = 0x0A000000; + constexpr uint32_t STENCIL_MASK = 0x13000000; + constexpr uint32_t STENCIL_OP = 0x0C000000; + constexpr uint32_t TAG = 0x03000000; + constexpr uint32_t TAG_MASK = 0x14000000; + constexpr uint32_t VERTEX2F = 0x40000000; + constexpr uint32_t VERTEX2II = 0x80000000; +} + +namespace FTDI_FT810_DL { + constexpr uint32_t NOP = 0x25000000; + constexpr uint32_t BITMAP_LAYOUT_H = 0x28000000; + constexpr uint32_t BITMAP_SIZE_H = 0x29000000; + constexpr uint32_t VERTEX_FORMAT = 0x27000000; + constexpr uint32_t VERTEX_TRANSLATE_X = 0x2B000000; + constexpr uint32_t VERTEX_TRANSLATE_Y = 0x2C000000; +} + +// CO-PROCESSOR ENGINE COMMANDS +namespace FTDI { + constexpr uint32_t CMD_DLSTART = 0xFFFFFF00; + constexpr uint32_t CMD_SWAP = 0xFFFFFF01; + constexpr uint32_t CMD_COLDSTART = 0xFFFFFF32; + constexpr uint32_t CMD_INTERRUPT = 0xFFFFFF02; + constexpr uint32_t CMD_APPEND = 0xFFFFFF1E; + constexpr uint32_t CMD_REGREAD = 0xFFFFFF19; + constexpr uint32_t CMD_MEMWRITE = 0xFFFFFF1A; + constexpr uint32_t CMD_INFLATE = 0xFFFFFF22; + constexpr uint32_t CMD_LOADIMAGE = 0xFFFFFF24; + constexpr uint32_t CMD_MEMCRC = 0xFFFFFF18; + constexpr uint32_t CMD_MEMZERO = 0xFFFFFF1C; + constexpr uint32_t CMD_MEMSET = 0xFFFFFF1B; + constexpr uint32_t CMD_MEMCPY = 0xFFFFFF1D; + constexpr uint32_t CMD_BUTTON = 0xFFFFFF0D; + constexpr uint32_t CMD_CLOCK = 0xFFFFFF14; + constexpr uint32_t CMD_FGCOLOR = 0xFFFFFF0A; + constexpr uint32_t CMD_BGCOLOR = 0xFFFFFF09; + constexpr uint32_t CMD_GRADCOLOR = 0xFFFFFF34; + constexpr uint32_t CMD_GAUGE = 0xFFFFFF13; + constexpr uint32_t CMD_GRADIENT = 0xFFFFFF0B; + constexpr uint32_t CMD_KEYS = 0xFFFFFF0E; + constexpr uint32_t CMD_PROGRESS = 0xFFFFFF0F; + constexpr uint32_t CMD_SCROLLBAR = 0xFFFFFF11; + constexpr uint32_t CMD_SLIDER = 0xFFFFFF10; + constexpr uint32_t CMD_DIAL = 0xFFFFFF2D; + constexpr uint32_t CMD_TOGGLE = 0xFFFFFF12; + constexpr uint32_t CMD_TEXT = 0xFFFFFF0C; + constexpr uint32_t CMD_NUMBER = 0xFFFFFF2E; + constexpr uint32_t CMD_LOADIDENTITY = 0xFFFFFF26; + constexpr uint32_t CMD_SETMATRIX = 0xFFFFFF2A; + constexpr uint32_t CMD_GETMATRIX = 0xFFFFFF33; + constexpr uint32_t CMD_GETPTR = 0xFFFFFF23; + constexpr uint32_t CMD_GETPROPS = 0xFFFFFF25; + constexpr uint32_t CMD_SCALE = 0xFFFFFF28; + constexpr uint32_t CMD_ROTATE = 0xFFFFFF29; + constexpr uint32_t CMD_TRANSLATE = 0xFFFFFF27; + constexpr uint32_t CMD_CALIBRATE = 0xFFFFFF15; + constexpr uint32_t CMD_SPINNER = 0xFFFFFF16; + constexpr uint32_t CMD_SCREENSAVER = 0xFFFFFF2F; + constexpr uint32_t CMD_SKETCH = 0xFFFFFF30; + constexpr uint32_t CMD_STOP = 0xFFFFFF17; + constexpr uint32_t CMD_SETFONT = 0xFFFFFF2B; + constexpr uint32_t CMD_TRACK = 0xFFFFFF2C; + constexpr uint32_t CMD_SNAPSHOT = 0xFFFFFF1F; + constexpr uint32_t CMD_LOGO = 0xFFFFFF31; +} + +namespace FTDI_FT810 { + constexpr uint32_t CMD_SETROTATE = 0xFFFFFF36; + constexpr uint32_t CMD_SNAPSHOT2 = 0xFFFFFF37; + constexpr uint32_t CMD_SETBASE = 0xFFFFFF38; + constexpr uint32_t CMD_MEDIAFIFO = 0xFFFFFF39; + constexpr uint32_t CMD_PLAYVIDEO = 0xFFFFFF3A; + constexpr uint32_t CMD_VIDEOSTART = 0xFFFFFF40; + constexpr uint32_t CMD_VIDEOFRAME = 0xFFFFFF41; + constexpr uint32_t CMD_SETBITMAP = 0xFFFFFF43; +} + +namespace FTDI { + enum effect_t { + SILENCE = 0x00, + SQUARE_WAVE = 0x01, + SINE_WAVE = 0x02, + SAWTOOTH_WAVE = 0x03, + TRIANGLE_WAVE = 0x04, + BEEPING = 0x05, + ALARM = 0x06, + WARBLE = 0x07, + CAROUSEL = 0x08, + SHORT_PIPS_1 = 0x10, + SHORT_PIPS_2 = 0x11, + SHORT_PIPS_3 = 0x12, + SHORT_PIPS_4 = 0x13, + SHORT_PIPS_5 = 0x14, + SHORT_PIPS_6 = 0x15, + SHORT_PIPS_7 = 0x16, + SHORT_PIPS_8 = 0x17, + SHORT_PIPS_9 = 0x18, + SHORT_PIPS_10 = 0x19, + SHORT_PIPS_11 = 0x1A, + SHORT_PIPS_12 = 0x1B, + SHORT_PIPS_13 = 0x1C, + SHORT_PIPS_14 = 0x1D, + SHORT_PIPS_15 = 0x1E, + SHORT_PIPS_16 = 0x1F, + DTMF_POUND = 0x23, + DTMF_STAR = 0x2C, + DTMF_0 = 0x30, + DTMF_1 = 0x31, + DTMF_2 = 0x32, + DTMF_3 = 0x33, + DTMF_4 = 0x34, + DTMF_5 = 0x35, + DTMF_6 = 0x36, + DTMF_7 = 0x37, + DTMF_8 = 0x38, + DTMF_9 = 0x39, + HARP = 0x40, + XYLOPHONE = 0x41, + TUBA = 0x42, + GLOCKENSPIEL = 0x43, + ORGAN = 0x44, + TRUMPET = 0x45, + PIANO = 0x46, + CHIMES = 0x47, + MUSIC_BOX = 0x48, + BELL = 0x49, + CLICK = 0x50, + SWITCH = 0x51, + COWBELL = 0x52, + NOTCH = 0x53, + HIHAT = 0x54, + KICKDRUM = 0x55, + POP = 0x56, + CLACK = 0x57, + CHACK = 0x58, + MUTE = 0x60, + UNMUTE = 0x61 + }; + + enum note_t { + END_SONG = 0xFF, + REST = 0x00, + + NOTE_C1 = 0x18, // 24 + NOTE_C1S = 0x19, + NOTE_D1 = 0x1A, + NOTE_D1S = 0x1B, + NOTE_E1 = 0x1C, + NOTE_F1 = 0x1D, + NOTE_F1S = 0x1E, + NOTE_G1 = 0x1F, + NOTE_G1S = 0x20, + NOTE_A1 = 0x21, + NOTE_A1S = 0x22, + NOTE_B1 = 0x23, + + NOTE_C2 = 0x24, //36 + NOTE_C2S = 0x25, + NOTE_D2 = 0x26, + NOTE_D2S = 0x27, + NOTE_E2 = 0x28, + NOTE_F2 = 0x29, + NOTE_F2S = 0x2A, + NOTE_G2 = 0x2B, + NOTE_G2S = 0x2C, + NOTE_A2 = 0x2D, + NOTE_A2S = 0x2E, + NOTE_B2 = 0x2F, + + NOTE_C3 = 0x30, + NOTE_C3S = 0x31, + NOTE_D3 = 0x32, + NOTE_D3S = 0x33, + NOTE_E3 = 0x34, + NOTE_F3 = 0x35, + NOTE_F3S = 0x36, + NOTE_G3 = 0x37, + NOTE_G3S = 0x38, + NOTE_A3 = 0x39, + NOTE_A3S = 0x3A, + NOTE_B3 = 0x3B, + + NOTE_C4 = 0x3C, + NOTE_C4S = 0x3D, + NOTE_D4 = 0x3E, + NOTE_D4S = 0x3F, + NOTE_E4 = 0x40, + NOTE_F4 = 0x41, + NOTE_F4S = 0x42, + NOTE_G4 = 0x43, + NOTE_G4S = 0x44, + NOTE_A4 = 0x45, + NOTE_A4S = 0x46, + NOTE_B4 = 0x47, + + NOTE_C5 = 0x48, + NOTE_C5S = 0x49, + NOTE_D5 = 0x4A, + NOTE_D5S = 0x4B, + NOTE_E5 = 0x4C, + NOTE_F5 = 0x4D, + NOTE_F5S = 0x4E, + NOTE_G5 = 0x4F, + NOTE_G5S = 0x50, + NOTE_A5 = 0x51, + NOTE_A5S = 0x52, + NOTE_B5 = 0x53, + }; +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/display_list.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/display_list.h new file mode 100644 index 000000000..d4f9c2849 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/display_list.h @@ -0,0 +1,118 @@ +/****************** + * display_list.h * + *****************/ + +/********************************************************************************** + * Adapted from: * + * https://github.com/RudolphRiedel/FT800-FT813 * + * By Rudolph Riedel * + * * + * MIT License * + * * + * Copyright (c) 2017 * + * * + * Permission is hereby granted, free of charge, to any person obtaining a copy * + * of this software and associated documentation files (the "Software"), to deal * + * in the Software without restriction, including without limitation the rights * + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * + * copies of the Software, and to permit persons to whom the Software is * + * furnished to do so, subject to the following conditions: * + * * + * The above copyright notice and this permission notice shall be included in all * + * copies or substantial portions of the Software. * + * * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * + * SOFTWARE. * + * * + **********************************************************************************/ + +#pragma once + +namespace FTDI { + /* FT8xx graphics engine specific macros useful for static display list generation */ + inline uint32_t ALPHA_FUNC(uint8_t func, uint8_t ref) {return DL::ALPHA_FUNC|((func&7UL)<<8)|(ref&255UL);} + inline uint32_t BEGIN(begin_t prim) {return DL::BEGIN|(prim&15UL);} + + inline uint32_t BITMAP_SOURCE(uint32_t ram_g_addr) {return DL::BITMAP_SOURCE|(ram_g_addr & (FTDI::ftdi_memory_map::RAM_G_SIZE-1));} + inline uint32_t BITMAP_HANDLE(uint8_t handle) {return DL::BITMAP_HANDLE|(handle&31UL);} + inline uint32_t BITMAP_LAYOUT(uint8_t format, uint16_t linestride, uint16_t height) + {return DL::BITMAP_LAYOUT|((format&31UL)<<19)|((linestride&1023UL)<<9)|(height&511UL);} + + inline uint32_t BITMAP_SIZE(uint8_t filter, uint8_t wrapx, uint8_t wrapy, uint16_t width, uint16_t height) + {return DL::BITMAP_SIZE|((filter&1UL)<<20)|((wrapx&1UL)<<19)|((wrapy&1UL)<<18)|((width&511UL)<<9)|(height&511UL);} + #if FTDI_API_LEVEL >= 810 + inline uint32_t BITMAP_LAYOUT_H(uint8_t linestride, uint8_t height) + {return DL::BITMAP_LAYOUT_H|((linestride&3UL)<<2)|(height&3UL);} + inline uint32_t BITMAP_SIZE_H(uint8_t width, uint8_t height) + {return DL::BITMAP_SIZE_H|((width&3UL)<<2)|(height&3UL);} + #endif + inline uint32_t BITMAP_TRANSFORM_A(uint16_t a) {return DL::BITMAP_TRANSFORM_A|(a&131071UL);} + inline uint32_t BITMAP_TRANSFORM_B(uint16_t b) {return DL::BITMAP_TRANSFORM_B|(b&131071UL);} + inline uint32_t BITMAP_TRANSFORM_C(uint32_t c) {return DL::BITMAP_TRANSFORM_C|(c&16777215UL);} + inline uint32_t BITMAP_TRANSFORM_D(uint16_t d) {return DL::BITMAP_TRANSFORM_D|(d&131071UL);} + inline uint32_t BITMAP_TRANSFORM_E(uint16_t e) {return DL::BITMAP_TRANSFORM_E|(e&131071UL);} + inline uint32_t BITMAP_TRANSFORM_F(uint32_t f) {return DL::BITMAP_TRANSFORM_F|(f&16777215UL);} + inline uint32_t BLEND_FUNC(uint8_t src,uint8_t dst) {return DL::BLEND_FUNC|((src&7UL)<<3)|(dst&7UL);} + inline uint32_t CALL(uint16_t dest) {return DL::CALL|(dest&65535UL);} + inline uint32_t CELL(uint8_t cell) {return DL::CELL|(cell&127UL);} + inline uint32_t CLEAR(bool c,bool s,bool t) {return DL::CLEAR|((c?1UL:0UL)<<2)|((s?1UL:0UL)<<1)|(t?1UL:0UL);} + inline uint32_t CLEAR_COLOR_A(uint8_t alpha) {return DL::CLEAR_COLOR_A|(alpha&255UL);} + inline uint32_t CLEAR_COLOR_RGB(uint8_t red, uint8_t green, uint8_t blue) + {return DL::CLEAR_COLOR_RGB|((red&255UL)<<16)|((green&255UL)<<8)|(blue&255UL);} + inline uint32_t CLEAR_COLOR_RGB(uint32_t rgb) {return DL::CLEAR_COLOR_RGB|rgb;} + inline uint32_t CLEAR_STENCIL(uint8_t s) {return DL::CLEAR_STENCIL|(s&255UL);} + inline uint32_t CLEAR_TAG(uint8_t s) {return DL::CLEAR_TAG|(s&255UL);} + inline uint32_t COLOR_A(uint8_t alpha) {return DL::COLOR_A|(alpha&255UL);} + inline uint32_t COLOR_MASK(bool r, bool g, bool b, bool a) {return DL::COLOR_MASK|((r?1UL:0UL)<<3)|((g?1UL:0UL)<<2)|((b?1UL:0UL)<<1)|(a?1UL:0UL);} + inline uint32_t COLOR_RGB(uint8_t red,uint8_t green,uint8_t blue) + {return DL::COLOR_RGB|((red&255UL)<<16)|((green&255UL)<<8)|(blue&255UL);} + inline uint32_t COLOR_RGB(uint32_t rgb) {return DL::COLOR_RGB|rgb;} + /* inline uint32_t DISPLAY() {return (0UL<<24)) */ + inline uint32_t END() {return DL::END;} + inline uint32_t JUMP(uint16_t dest) {return DL::JUMP|(dest&65535UL);} + inline uint32_t LINE_WIDTH(uint16_t width) {return DL::LINE_WIDTH|(width&4095UL);} + inline uint32_t MACRO(uint8_t m) {return DL::MACRO|(m&1UL);} + inline uint32_t POINT_SIZE(uint16_t size) {return DL::POINT_SIZE|(size&8191UL);} + inline uint32_t RESTORE_CONTEXT() {return DL::RESTORE_CONTEXT;} + inline uint32_t RETURN () {return DL::RETURN;} + inline uint32_t SAVE_CONTEXT() {return DL::SAVE_CONTEXT;} + inline uint32_t SCISSOR_XY(uint16_t x,uint16_t y) { + return DL::SCISSOR_XY | + (FTDI::ftdi_chip >= 810 + ? ((x&2047UL)<<11)|(y&2047UL) + : ((x& 511UL)<<10)|(y&511UL)); + } + inline uint32_t SCISSOR_SIZE(uint16_t w,uint16_t h) { + return DL::SCISSOR_SIZE | + (FTDI::ftdi_chip >= 810 + ? ((w&4095UL)<<12)|(h&4095UL) + : ((w&1023UL)<<10)|(h&1023UL)); + } + inline uint32_t SCISSOR_XY() {return DL::SCISSOR_XY;} + inline uint32_t SCISSOR_SIZE() { + return DL::SCISSOR_SIZE | + (FTDI::ftdi_chip >= 810 + ? (2048UL<<12)|(2048UL) + : ( 512UL<<10)|( 512UL)); + } + inline uint32_t STENCIL_FUNC(uint16_t func, uint8_t ref, uint8_t mask) + {return DL::STENCIL_FUNC|((func&7UL)<<16)|((ref&255UL)<<8)|(mask&255UL);} + inline uint32_t STENCIL_MASK(uint8_t mask) {return DL::STENCIL_MASK|(mask&255UL);} + inline uint32_t STENCIL_OP(uint8_t sfail, uint8_t spass) {return DL::STENCIL_OP|(((sfail)&7UL)<<3)|(spass&7UL);} + inline uint32_t TAG(uint8_t s) {return DL::TAG|(s&255UL);} + inline uint32_t TAG_MASK(bool mask) {return DL::TAG_MASK|(mask?1:0);} + inline uint32_t VERTEX2F(uint16_t x, uint16_t y) {return DL::VERTEX2F|((x&32767UL)<<15)|(y&32767UL);} + inline uint32_t VERTEX2II(uint16_t x,uint16_t y, uint8_t handle = 0, uint8_t cell = 0) + {return DL::VERTEX2II|((x&511UL)<<21)|((y&511UL)<<12)|((handle&31UL)<<7)|(cell&127UL);} + + #if FTDI_API_LEVEL >= 810 + inline uint32_t VERTEX_FORMAT(uint8_t frac) {return DL::VERTEX_FORMAT|(frac&7UL);} + inline uint32_t VERTEX_TRANSLATE_X(int32_t x) {return DL::VERTEX_TRANSLATE_X|(x&131071UL);} + inline uint32_t VERTEX_TRANSLATE_Y(int32_t y) {return DL::VERTEX_TRANSLATE_Y|(y&131071UL);} + #endif +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h new file mode 100644 index 000000000..3d6541e70 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h @@ -0,0 +1,40 @@ +/**************** + * ftdi_basic.h * + ****************/ + +/**************************************************************************** + * Written By Mark Pelletier 2019 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#include "../compat.h" + +#if !defined(__MARLIN_FIRMWARE__) + #define FTDI_BASIC +#endif + +#ifdef FTDI_BASIC + #include "registers_ft800.h" + #include "registers_ft810.h" + #include "constants.h" + #include "boards.h" + #include "commands.h" + #include "spi.h" + #include "display_list.h" + #include "resolutions.h" +#endif diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft800.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft800.h new file mode 100644 index 000000000..ff17d019d --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft800.h @@ -0,0 +1,150 @@ +/********************* + * registers_ft800.h * + *********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +/**************************************************************************** + * This header defines registers for the FTDI FT800 LCD Driver chip. * + ****************************************************************************/ + +/******************************************************************************* + * FT810 * + * * + * START END ADDR SIZE NAME DESCRIPTION * + * * + * 0x000000 0x03FFFF 256 kB RAM_G Main Graphics RAM * + * * + * 0x0C0000 0x0C0003 4 B ROM_CHIPID [0:1] 0x800 Chip Id * + * [1:2] 0x0100 Vers ID * + * * + * 0x0BB23C 0x0FFFFB 275 kB ROM_FONT Font table and bitmap * + * * + * 0x0FFFFC 0x0FFFFF 4 B ROM_FONT_ADDR Font table pointer address * + * * + * 0x100000 0x101FFF 8 kB RAM_DL Display List RAM * + * * + * 0x102000 0x1023FF 1 kB RAM_PAL Palette RAM * + * * + * 0x102400 0x10257F 380 B * Registers * + * * + * 0x108000 0x108FFF 4 kB RAM_CMD Command Buffer * + * * + *******************************************************************************/ + +#pragma once + +namespace FTDI { + struct ft800_memory_map { + + // MEMORY LOCATIONS FT800 + static constexpr uint32_t RAM_G = 0x000000; // Main Graphics RAM + static constexpr uint32_t ROM_CHIPID = 0x0C0000; // Chip ID/Version ID + static constexpr uint32_t ROM_FONT = 0x0BB23C; // Font ROM + static constexpr uint32_t ROM_FONT_ADDR = 0x0FFFFC; // Font Table Pointer + static constexpr uint32_t RAM_DL = 0x100000; // Display List RAM + static constexpr uint32_t RAM_PAL = 0x102000; // Palette RAM + static constexpr uint32_t RAM_REG = 0x102400; // Registers + static constexpr uint32_t RAM_CMD = 0x108000; // Command Buffer + + static constexpr uint32_t RAM_G_SIZE = 256*1024l; // 256k + }; + + struct ft800_registers { + // REGISTERS AND ADDRESSES FT800 + + // REGISTER ADDRESS SIZE RESET VALUE TYPE DESCRIPTION + + static constexpr uint32_t ID = 0x102400; // 8 0x7C r Identification Register, Always 0x7C + static constexpr uint32_t FRAMES = 0x102404; // 32 0x00000000 r Frame Counter, Since Reset + static constexpr uint32_t CLOCK = 0x102408; // 32 0x00000000 r Clock cycles, Since Reset + static constexpr uint32_t FREQUENCY = 0x10240C; // 28 0x03938700 r/w Main Clock Frequency + static constexpr uint32_t RENDERMODE = 0x102410; // 1 0x00 r/w Rendering Mode: 0 = normal, 1 = single-line + static constexpr uint32_t SNAPY = 0x102414; // 11 0x0000 r/w Scan Line Select for RENDERMODE 1 + static constexpr uint32_t SNAPSHOT = 0x102418; // 1 - r Trigger for RENDERMODE 1 + static constexpr uint32_t CPURESET = 0x10241C; // 3 0x02 r/w RESET Bit2 Audio - Bit1 Touch - Bit0 Graphics + static constexpr uint32_t TAP_CRC = 0x102420; // 32 - r Live Video Tap + static constexpr uint32_t TAP_MASK = 0x102424; // 32 0xFFFFFFFF r/w Live Video Tap Mask + static constexpr uint32_t HCYCLE = 0x102428; // 12 0x224 r/w Horizontal Total Cycle Count + static constexpr uint32_t HOFFSET = 0x10242C; // 12 0x02B r/w Horizontal Display Start Offset + static constexpr uint32_t HSIZE = 0x102430; // 12 0x1E0 r/w Horizontal Display Pixel Count + static constexpr uint32_t HSYNC0 = 0x102434; // 12 0x000 r/w Horizontal Sync Fall Offset + static constexpr uint32_t HSYNC1 = 0x102438; // 12 0x029 r/w Horizontal Sync Rise Offset + static constexpr uint32_t VCYCLE = 0x10243C; // 12 0x124 r/w Vertical Total Cycle Count + static constexpr uint32_t VOFFSET = 0x102440; // 12 0x00C r/w Vertical Display Start Offset + static constexpr uint32_t VSIZE = 0x102444; // 12 0x110 r/w Vertical Display Line Count + static constexpr uint32_t VSYNC0 = 0x102448; // 10 0x000 r/w Vertical Sync Fall Offset + static constexpr uint32_t VSYNC1 = 0x10244C; // 10 0x00A r/w Vertical Sync Rise Offset + static constexpr uint32_t DLSWAP = 0x102450; // 2 0x00 r/w Display List Swap Control + static constexpr uint32_t ROTATE = 0x102454; // 3 0x00 r/w Screen 90,180, 270 degree rotate + static constexpr uint32_t OUTBITS = 0x102458; // 9 0x1B6 r/w Output Resolution, 3x3x3 Bits + static constexpr uint32_t DITHER = 0x10245C; // 1 0x01 r/w Output Dither Enable + static constexpr uint32_t SWIZZLE = 0x102460; // 4 0x00 r/w Output RGB Swizzle, Pin Change for PCB Routing + static constexpr uint32_t CSPREAD = 0x102464; // 1 0x01 r/w Output Clock Spreading Enable + static constexpr uint32_t PCLK_POL = 0x102468; // 1 0x00 r/w PCLK Polarity: 0 = Rising Edge, 1 = Falling Edge + static constexpr uint32_t PCLK = 0x10246C; // 8 0x00 r/w PCLK Frequency Divider, 0 = Disable Clock + static constexpr uint32_t TAG_X = 0x102470; // 11 0x000 r/w Tag Query X Coordinate + static constexpr uint32_t TAG_Y = 0x102474; // 11 0x000 r/w Tag Query Y Coordinate + static constexpr uint32_t TAG = 0x102478; // 8 0x00 r Tag Query Result + static constexpr uint32_t VOL_PB = 0x10247C; // 8 0xFF r/w Audio Playback Volume + static constexpr uint32_t VOL_SOUND = 0x102480; // 8 0xFF r/w Audio Synthesizer Volume + static constexpr uint32_t SOUND = 0x102484; // 16 0x0000 r/w Audio Sound Effect Select + static constexpr uint32_t PLAY = 0x102488; // 1 0x00 r/w Audio Start Effect Playback + static constexpr uint32_t GPIO_DIR = 0x10248C; // 8 0x80 r/w GPIO Pin Direction: 0 = Input , 1 = Output + static constexpr uint32_t GPIO = 0x102490; // 8 0x00 r/w GPIO Pin Values for 0, 1, 7 Drive Strength 2, 3, 4, 5, 6 + static constexpr uint32_t INT_FLAGS = 0x102498; // 8 0x00 r Interrupt Flags, Clear by Reading + static constexpr uint32_t INT_EN = 0x10249C; // 1 0x00 r/w Global Interrupt Enable + static constexpr uint32_t INT_MASK = 0x1024A0; // 8 0xFF r/w Interrupt Enable Mask + static constexpr uint32_t PLAYBACK_START = 0x1024A4; // 20 0x00000 r/w Audio Playback RAM Start Address + static constexpr uint32_t PLAYBACK_LENGTH = 0x1024A8; // 20 0x00000 r/w Audio Playback Sample Length (Bytes) + static constexpr uint32_t PLAYBACK_READPTR = 0x1024AC; // 20 - r Audio Playback Read Pointer + static constexpr uint32_t PLAYBACK_FREQ = 0x1024B0; // 16 0x1F40 r/w Audio Playback Frequency (Hz) + static constexpr uint32_t PLAYBACK_FORMAT = 0x1024B4; // 2 0x00 r/w Audio Playback Format + static constexpr uint32_t PLAYBACK_LOOP = 0x1024B8; // 1 0x00 r/w Audio Playback Loop Enable + static constexpr uint32_t PLAYBACK_PLAY = 0x1024BC; // 1 0x00 r Audio Start Playback + static constexpr uint32_t PWM_HZ = 0x1024C0; // 14 0x00FA r/w Backlight PWM Frequency (Hz) + static constexpr uint32_t PWM_DUTY = 0x1024C4; // 8 0x80 r/w Backlight PWM Duty Cycle: 0 = 0%, 128 = 100% + static constexpr uint32_t MACRO_0 = 0x1024C8; // 32 0x00000000 r/w Display List Macro Command 0 + static constexpr uint32_t MACRO_1 = 0x1024CC; // 32 0x00000000 r/w Display List Macro Command 1 + static constexpr uint32_t CMD_READ = 0x1024E4; // 12 0x000 r/w Command Buffer Read Pointer + static constexpr uint32_t CMD_WRITE = 0x1024E8; // 12 0x000 r/w Command Buffer Write Pointer + static constexpr uint32_t CMD_DL = 0x1024EC; // 13 0x0000 r/w Command Display List Offset + static constexpr uint32_t TOUCH_MODE = 0x1024F0; // 2 0x03 r/w Touch-Screen Sampling Mode + static constexpr uint32_t TOUCH_ADC_MODE = 0x1024F4; // 1 0x01 r/w Select Single Ended or Differential Sampling + static constexpr uint32_t TOUCH_CHARGE = 0x1024F8; // 16 0x1770 r/w Touch Screen Charge Time, n x 6 Clocks + static constexpr uint32_t TOUCH_SETTLE = 0x1024FC; // 4 0x03 r/w Touch-Screen Settle Time, n x 6 Clocks + static constexpr uint32_t TOUCH_OVERSAMPLE = 0x102500; // 4 0x07 r/w Touch-Screen Oversample Factor + static constexpr uint32_t TOUCH_RZTHRESH = 0x102504; // 16 0xFFFF r/w Touch-Screen Resistance Threshold + static constexpr uint32_t TOUCH_RAW_XY = 0x102508; // 32 - r Touch-Screen Raw (x-MSB16; y-LSB16) + static constexpr uint32_t TOUCH_RZ = 0x10250C; // 16 - r Touch-Screen Resistance + static constexpr uint32_t TOUCH_SCREEN_XY = 0x102510; // 32 - r Touch-Screen Screen (x-MSB16; y-LSB16) + static constexpr uint32_t TOUCH_TAG_XY = 0x102514; // 32 - r Touch-Screen Tag 0 Lookup (x-MSB16; y-LSB16) + static constexpr uint32_t TOUCH_TAG = 0x102518; // 8 - r Touch-Screen Tag 0 Result + static constexpr uint32_t TOUCH_TRANSFORM_A = 0x10251C; // 32 0x00010000 r/w Touch-Screen Transform Coefficient A (s15.16) + static constexpr uint32_t TOUCH_TRANSFORM_B = 0x102520; // 32 0x00000000 r/w Touch-Screen Transform Coefficient B (s15.16) + static constexpr uint32_t TOUCH_TRANSFORM_C = 0x102524; // 32 0x00000000 r/w Touch-Screen Transform Coefficient C (s15.16) + static constexpr uint32_t TOUCH_TRANSFORM_D = 0x102528; // 32 0x00000000 r/w Touch-Screen Transform Coefficient D (s15.16) + static constexpr uint32_t TOUCH_TRANSFORM_E = 0x10252C; // 32 0x00010000 r/w Touch-Screen Transform Coefficient E (s15.16) + static constexpr uint32_t TOUCH_TRANSFORM_F = 0x102530; // 32 0x00000000 r/w Touch-Screen Transform Coefficient F (s15.16) + // Reserved Addresses 0x102434 - 0x102470 + static constexpr uint32_t TOUCH_DIRECT_XY = 0x102574; // 32 - r Touch-Screen Direct Conversions XY (x-MSB16; y-LSB16) + static constexpr uint32_t TOUCH_DIRECT_Z1Z2 = 0x102578; // 32 - r Touch-Screen Direct Conversions Z (z1-MSB16; z2-LSB16) + static constexpr uint32_t TRACKER = 0x109000; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8) + }; +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft810.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft810.h new file mode 100644 index 000000000..6cc975896 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft810.h @@ -0,0 +1,185 @@ +/********************* + * registers_ft810.h * + *********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +/**************************************************************************** + * This header defines registers for the FTDI FT810 LCD Driver chip. * + ****************************************************************************/ + +/******************************************************************************* + * FT810 * + * * + * START END ADDR SIZE NAME DESCRIPTION * + * * + * 0x000000 0x0FFFFF 1024 kB RAM_G Main Graphics RAM (0 to 1048572) * + * * + * 0x0C0000 0x0C0003 4 B ROM_CHIPID [0:1] 0x800 Chip Id * + * [1:2] 0x0100 Vers ID * + * * + * 0x1E0000 0x2FFFFB 1152 kB ROM_FONT Font table and bitmap * + * * + * 0x2FFFFC 0x2FFFFF 4 B ROM_FONT_ADDR Font table pointer address * + * * + * 0x300000 0x301FFF 8 kB RAM_DL Display List RAM * + * * + * 0x302000 0x302FFF 4 kB * Registers * + * * + * 0x308000 0x308FFF 4 kB RAM_CMD Command Buffer * + * * + *******************************************************************************/ + +#pragma once + +namespace FTDI { + struct ft810_memory_map { + // MEMORY LOCATIONS FT810 + static constexpr uint32_t RAM_G = 0x000000; // Main Graphics RAM + static constexpr uint32_t ROM_CHIPID = 0x0C0000; // Chip ID/Version ID + static constexpr uint32_t ROM_FONT = 0x1E0000; // Font ROM + static constexpr uint32_t ROM_FONT_ADDR = 0x2FFFFC; // Font Table Pointer + static constexpr uint32_t RAM_DL = 0x300000; // Display List RAM + static constexpr uint32_t RAM_REG = 0x302000; // Registers + static constexpr uint32_t RAM_CMD = 0x308000; // Command Buffer + + static constexpr uint32_t RAM_G_SIZE = 1024*1024l; // 1024k + }; + + struct ft810_registers { + // REGISTERS AND ADDRESSES FT810 + + // REGISTER ADDRESS SIZE RESET VALUE TYPE DESCRIPTION + + static constexpr uint32_t ID = 0x302000; // 8 0x7C r Identification Register, Always 0x7C + static constexpr uint32_t FRAMES = 0x302004; // 32 0x00000000 r Frame Counter, Since Reset + static constexpr uint32_t CLOCK = 0x302008; // 32 0x00000000 r Clock cycles, Since Reset + static constexpr uint32_t FREQUENCY = 0x30200C; // 28 0x03938700 r/w Main Clock Frequency + static constexpr uint32_t RENDERMODE = 0x302010; // 1 0x00 r/w Rendering Mode: 0 = normal, 1 = single-line + static constexpr uint32_t SNAPY = 0x302014; // 11 0x0000 r/w Scan Line Select for RENDERMODE 1 + static constexpr uint32_t SNAPSHOT = 0x302018; // 1 - r Trigger for RENDERMODE 1 + static constexpr uint32_t SNAPFORMAT = 0x30201C; // 6 0x20 r/w Pixel Format for Scanline Readout + static constexpr uint32_t CPURESET = 0x302020; // 3 0x02 r/w RESET Bit2 Audio - Bit1 Touch - Bit0 Graphics + static constexpr uint32_t TAP_CRC = 0x302024; // 32 - r Live Video Tap + static constexpr uint32_t TAP_MASK = 0x302028; // 32 0xFFFFFFFF r/w Live Video Tap Mask + static constexpr uint32_t HCYCLE = 0x30202C; // 12 0x224 r/w Horizontal Total Cycle Count + static constexpr uint32_t HOFFSET = 0x302030; // 12 0x02B r/w Horizontal Display Start Offset + static constexpr uint32_t HSIZE = 0x302034; // 12 0x1E0 r/w Horizontal Display Pixel Count + static constexpr uint32_t HSYNC0 = 0x302038; // 12 0x000 r/w Horizontal Sync Fall Offset + static constexpr uint32_t HSYNC1 = 0x30203C; // 12 0x029 r/w Horizontal Sync Rise Offset + static constexpr uint32_t VCYCLE = 0x302040; // 12 0x124 r/w Vertical Total Cycle Count + static constexpr uint32_t VOFFSET = 0x302044; // 12 0x00C r/w Vertical Display Start Offset + static constexpr uint32_t VSIZE = 0x302048; // 12 0x110 r/w Vertical Display Line Count + static constexpr uint32_t VSYNC0 = 0x30204C; // 10 0x000 r/w Vertical Sync Fall Offset + static constexpr uint32_t VSYNC1 = 0x302050; // 10 0x00A r/w Vertical Sync Rise Offset + static constexpr uint32_t DLSWAP = 0x302054; // 2 0x00 r/w Display List Swap Control + static constexpr uint32_t ROTATE = 0x302058; // 3 0x00 r/w Screen 90,180, 270 degree rotate + static constexpr uint32_t OUTBITS = 0x30205C; // 9 0x1B6 r/w Output Resolution, 3x3x3 Bits + static constexpr uint32_t DITHER = 0x302060; // 1 0x01 r/w Output Dither Enable + static constexpr uint32_t SWIZZLE = 0x302064; // 4 0x00 r/w Output RGB Swizzle, Pin Change for PCB Routing + static constexpr uint32_t CSPREAD = 0x302068; // 1 0x01 r/w Output Clock Spreading Enable + static constexpr uint32_t PCLK_POL = 0x30206C; // 1 0x00 r/w PCLK Polarity: 0 = Rising Edge, 1 = Falling Edge + static constexpr uint32_t PCLK = 0x302070; // 8 0x00 r/w PCLK Frequency Divider, 0 = Disable Clock + static constexpr uint32_t TAG_X = 0x302074; // 11 0x000 r/w Tag Query X Coordinate + static constexpr uint32_t TAG_Y = 0x302078; // 11 0x000 r/w Tag Query Y Coordinate + static constexpr uint32_t TAG = 0x30207C; // 8 0x00 r Tag Query Result + static constexpr uint32_t VOL_PB = 0x302080; // 8 0xFF r/w Audio Playback Volume + static constexpr uint32_t VOL_SOUND = 0x302084; // 8 0xFF r/w Audio Synthesizer Volume + static constexpr uint32_t SOUND = 0x302088; // 16 0x0000 r/w Audio Sound Effect Select + static constexpr uint32_t PLAY = 0x30208C; // 1 0x00 r/w Audio Start Effect Playback + static constexpr uint32_t GPIO_DIR = 0x302090; // 8 0x80 r/w GPIO Pin Direction: 0 = Input , 1 = Output + static constexpr uint32_t GPIO = 0x302094; // 8 0x00 r/w GPIO Pin Values for 0, 1, 7 Drive Strength 2, 3, 4, 5, 6 + static constexpr uint32_t GPIOX_DIR = 0x302098; // 16 0x8000 r/w Extended GPIO Pin Direction + static constexpr uint32_t GPIOX = 0x30209C; // 16 0x0080 r/w Extended GPIO Pin Values + // Reserved Addr 0x3020A0 + // Reserved Addr 0x3020A4 + static constexpr uint32_t INT_FLAGS = 0x3020A8; // 8 0x00 r Interrupt Flags, Clear by Reading + static constexpr uint32_t INT_EN = 0x3020AC; // 1 0x00 r/w Global Interrupt Enable + static constexpr uint32_t INT_MASK = 0x3020B0; // 8 0xFF r/w Interrupt Enable Mask + static constexpr uint32_t PLAYBACK_START = 0x3020B4; // 20 0x00000 r/w Audio Playback RAM Start Address + static constexpr uint32_t PLAYBACK_LENGTH = 0x3020B8; // 20 0x00000 r/w Audio Playback Sample Length (Bytes) + static constexpr uint32_t PLAYBACK_READPTR = 0x3020BC; // 20 - r Audio Playback Read Pointer + static constexpr uint32_t PLAYBACK_FREQ = 0x3020C0; // 16 0x1F40 r/w Audio Playback Frequency (Hz) + static constexpr uint32_t PLAYBACK_FORMAT = 0x3020C4; // 2 0x00 r/w Audio Playback Format + static constexpr uint32_t PLAYBACK_LOOP = 0x3020C8; // 1 0x00 r/w Audio Playback Loop Enable + static constexpr uint32_t PLAYBACK_PLAY = 0x3020CC; // 1 0x00 r Audio Start Playback + static constexpr uint32_t PWM_HZ = 0x3020D0; // 14 0x00FA r/w Backlight PWM Frequency (Hz) + static constexpr uint32_t PWM_DUTY = 0x3020D4; // 8 0x80 r/w Backlight PWM Duty Cycle: 0 = 0%, 128 = 100% + static constexpr uint32_t MACRO_0 = 0x3020D8; // 32 0x00000000 r/w Display List Macro Command 0 + static constexpr uint32_t MACRO_1 = 0x3020DC; // 32 0x00000000 r/w Display List Macro Command 1 + // Reserved Addr 0x3020E0 + // Reserved Addr 0x3020E4 + // Reserved Addr 0x3020E8 + // Reserved Addr 0x3020EC + // Reserved Addr 0x3020F0 + // Reserved Addr 0x3020F4 + static constexpr uint32_t CMD_READ = 0x3020F8; // 12 0x000 r/w Command Buffer Read Pointer + static constexpr uint32_t CMD_WRITE = 0x3020FC; // 12 0x000 r/w Command Buffer Write Pointer + static constexpr uint32_t CMD_DL = 0x302100; // 13 0x0000 r/w Command Display List Offset + static constexpr uint32_t TOUCH_MODE = 0x302104; // 2 0x03 r/w Touch-Screen Sampling Mode + static constexpr uint32_t TOUCH_ADC_MODE = 0x302108; // 1 0x01 r/w Select Single Ended or Differential Sampling + static constexpr uint32_t TOUCH_CHARGE = 0x30210C; // 16 0x1770 r/w Touch Screen Charge Time, n x 6 Clocks + static constexpr uint32_t TOUCH_SETTLE = 0x302110; // 4 0x03 r/w Touch-Screen Settle Time, n x 6 Clocks + static constexpr uint32_t TOUCH_OVERSAMPLE = 0x302114; // 4 0x07 r/w Touch-Screen Oversample Factor + static constexpr uint32_t TOUCH_RZTHRESH = 0x302118; // 16 0xFFFF r/w Touch-Screen Resistance Threshold + static constexpr uint32_t TOUCH_RAW_XY = 0x30211C; // 32 - r Touch-Screen Raw (x-MSB16; y-LSB16) + static constexpr uint32_t TOUCH_RZ = 0x302120; // 16 - r Touch-Screen Resistance + static constexpr uint32_t TOUCH_SCREEN_XY = 0x302124; // 32 - r Touch-Screen Screen (x-MSB16; y-LSB16) + static constexpr uint32_t TOUCH_TAG_XY = 0x302128; // 32 - r Touch-Screen Tag 0 Lookup (x-MSB16; y-LSB16) + static constexpr uint32_t TOUCH_TAG = 0x30212C; // 8 - r Touch-Screen Tag 0 Result + static constexpr uint32_t TOUCH_TAG1_XY = 0x302130; // 32 - r Touch-Screen Tag 1 Lookup + static constexpr uint32_t TOUCH_TAG1 = 0x302134; // 8 - r Touch-Screen Tag 1 Result + static constexpr uint32_t TOUCH_TAG2_XY = 0x302138; // 32 - r Touch-Screen Tag 2 Lookup + static constexpr uint32_t TOUCH_TAG2 = 0x30213C; // 8 - r Touch-Screen Tag 2 Result + static constexpr uint32_t TOUCH_TAG3_XY = 0x302140; // 32 - r Touch-Screen Tag 3 Lookup + static constexpr uint32_t TOUCH_TAG3 = 0x302144; // 8 - r Touch-Screen Tag 3 Result + static constexpr uint32_t TOUCH_TAG4_XY = 0x302148; // 32 - r Touch-Screen Tag 4 Lookup + static constexpr uint32_t TOUCH_TAG4 = 0x30214C; // 8 - r Touch-Screen Tag 4 Result + static constexpr uint32_t TOUCH_TRANSFORM_A = 0x302150; // 32 0x00010000 r/w Touch-Screen Transform Coefficient A (s15.16) + static constexpr uint32_t TOUCH_TRANSFORM_B = 0x302154; // 32 0x00000000 r/w Touch-Screen Transform Coefficient B (s15.16) + static constexpr uint32_t TOUCH_TRANSFORM_C = 0x302158; // 32 0x00000000 r/w Touch-Screen Transform Coefficient C (s15.16) + static constexpr uint32_t TOUCH_TRANSFORM_D = 0x30215C; // 32 0x00000000 r/w Touch-Screen Transform Coefficient D (s15.16) + static constexpr uint32_t TOUCH_TRANSFORM_E = 0x302160; // 32 0x00010000 r/w Touch-Screen Transform Coefficient E (s15.16) + static constexpr uint32_t TOUCH_TRANSFORM_F = 0x302164; // 32 0x00000000 r/w Touch-Screen Transform Coefficient F (s15.16) + static constexpr uint32_t TOUCH_CONFIG = 0x302168; // 16 0x8381 r/w Touch Configuration + static constexpr uint32_t CTOUCH_TOUCH4_X = 0x30216C; // 16 - r Extended Mode Touch Screen + // Reserved Addresses 0x302170 + static constexpr uint32_t BIST_EN = 0x302174; // 1 0 r/w BIST Memory Mapping Enable + // Reserved Addr 0x302178 + // Reserved Addr 0x30217C + static constexpr uint32_t TRIM = 0x302180; // 8 0 r/w Internal Clock Trimming + static constexpr uint32_t ANA_COMP = 0x302184; // 8 0 r/w Analog Control Register + static constexpr uint32_t SPI_WIDTH = 0x302188; // 3 0 r/w QSPI Bus Width Setting + static constexpr uint32_t TOUCH_DIRECT_XY = 0x30218C; // 32 - r Touch-Screen Direct Conversions XY (x-MSB16; y-LSB16) + static constexpr uint32_t TOUCH_DIRECT_Z1Z2 = 0x302190; // 32 - r Touch-Screen Direct Conversions Z (z1-MSB16; z2-LSB16) + // Reserved Addresses 0x302194 - 0x302560 + static constexpr uint32_t DATESTAMP = 0x320564; // 128 - r Stamp Date Code + static constexpr uint32_t CMDB_SPACE = 0x302574; // 12 0xFFC r/w Command DL Space Available + static constexpr uint32_t CMDB_WRITE = 0x302578; // 32 0 w Command DL Write + + static constexpr uint32_t TRACKER = 0x309000; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8) + static constexpr uint32_t TRACKER_1 = 0x309004; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8) + static constexpr uint32_t TRACKER_2 = 0x309008; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8) + static constexpr uint32_t TRACKER_3 = 0x30900C; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8) + static constexpr uint32_t TRACKER_4 = 0x309010; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8) + + static constexpr uint32_t MEDIAFIFO_READ = 0x309014; // 32 0x00000000 r/w Media FIFO read pointer + static constexpr uint32_t MEDIAFIFO_WRITE = 0x309018; // 32 0x00000000 r/w Media FIFO write pointer + }; +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/resolutions.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/resolutions.h new file mode 100644 index 000000000..c7fb0c37f --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/resolutions.h @@ -0,0 +1,128 @@ +/***************** + * resolutions.h * + *****************/ + +/**************************************************************************** + * Written By Mark Pelletier 2019 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +/*** + * The FT8xx has odd registers that don't correspond to timing values in + * display datasheets. This macro computes the register values using the + * formulas given in the document: + * + * Bridgetek Application Note + * AN_336 FT8xx + * Selecting an LCD Display + * Version 2.1 + * Issue Date: 2017-11-14 + * + */ +#define COMPUTE_REGS_FROM_DATASHEET \ + constexpr uint16_t Hoffset = thfp + thb - 1; \ + constexpr uint16_t Hcycle = th; \ + constexpr uint16_t Hsync0 = thfp - 1 ; \ + constexpr uint16_t Hsync1 = thfp + thpw - 1; \ + constexpr uint16_t Voffset = tvfp + tvb - 1; \ + constexpr uint16_t Vcycle = tv; \ + constexpr uint16_t Vsync0 = tvfp - 1; \ + constexpr uint16_t Vsync1 = tvfp + tvpw - 1; \ + static_assert(thfp + thb + Hsize == th, "Mismatch in display th"); \ + static_assert(tvfp + tvb + Vsize == tv, "Mismatch in display tv"); + +#ifdef TOUCH_UI_320x240 + namespace FTDI { + constexpr uint8_t Pclk = 8; + constexpr uint8_t Pclkpol = 0; + constexpr uint16_t Hsize = 320; + constexpr uint16_t Vsize = 240; + constexpr uint16_t Vsync0 = 0; + constexpr uint16_t Vsync1 = 2; + constexpr uint16_t Voffset = 13; + constexpr uint16_t Vcycle = 263; + constexpr uint16_t Hsync0 = 0; + constexpr uint16_t Hsync1 = 10; + constexpr uint16_t Hoffset = 70; + constexpr uint16_t Hcycle = 408; + + constexpr uint32_t default_transform_a = 0x000054ad; + constexpr uint32_t default_transform_b = 0xffffff52; + constexpr uint32_t default_transform_c = 0xfff7f6e4; + constexpr uint32_t default_transform_d = 0x00000065; + constexpr uint32_t default_transform_e = 0xffffbe3b; + constexpr uint32_t default_transform_f = 0x00f68e75; + } + +#elif defined(TOUCH_UI_480x272) + namespace FTDI { + constexpr uint8_t Pclk = 7; + constexpr uint8_t Pclkpol = 1; + constexpr uint16_t Hsize = 480; + constexpr uint16_t Vsize = 272; + + constexpr uint16_t th = 525; // One horizontal line + constexpr uint16_t thfp = 43; // HS Front porch + constexpr uint16_t thb = 2; // HS Back porch (blanking) + constexpr uint16_t thpw = 41; // HS pulse width + + constexpr uint16_t tv = 286; // Vertical period time + constexpr uint16_t tvfp = 12; // VS Front porch + constexpr uint16_t tvb = 2; // VS Back porch (blanking) + constexpr uint16_t tvpw = 10; // VS pulse width + + COMPUTE_REGS_FROM_DATASHEET + + constexpr uint32_t default_transform_a = 0x00008100; + constexpr uint32_t default_transform_b = 0x00000000; + constexpr uint32_t default_transform_c = 0xFFF18000; + constexpr uint32_t default_transform_d = 0x00000000; + constexpr uint32_t default_transform_e = 0xFFFFB100; + constexpr uint32_t default_transform_f = 0x0120D000; + } + +#elif defined(TOUCH_UI_800x480) + namespace FTDI { + constexpr uint8_t Pclk = 3; + constexpr uint8_t Pclkpol = 1; + constexpr uint16_t Hsize = 800; + constexpr uint16_t Vsize = 480; + + constexpr uint16_t th = 1056; // One horizontal line + constexpr uint16_t thfp = 210; // HS Front porch + constexpr uint16_t thb = 46; // HS Back porch (blanking) + constexpr uint16_t thpw = 23; // HS pulse width + + constexpr uint16_t tv = 525; // Vertical period time + constexpr uint16_t tvfp = 22; // VS Front porch + constexpr uint16_t tvb = 23; // VS Back porch (blanking) + constexpr uint16_t tvpw = 10; // VS pulse width + + COMPUTE_REGS_FROM_DATASHEET + + constexpr uint32_t default_transform_a = 0x0000D8B9; + constexpr uint32_t default_transform_b = 0x00000124; + constexpr uint32_t default_transform_c = 0xFFE23926; + constexpr uint32_t default_transform_d = 0xFFFFFF51; + constexpr uint32_t default_transform_e = 0xFFFF7E4F; + constexpr uint32_t default_transform_f = 0x01F0AF70; + } + +#else + #error Unknown or no LULZBOT_TOUCH_UI display resolution specified. To add a display resolution, modify "ftdi_eve_resolutions.h" +#endif diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp new file mode 100644 index 000000000..af33b5f05 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp @@ -0,0 +1,178 @@ +/*********** + * spi.cpp * + ***********/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "ftdi_basic.h" + +#ifdef FTDI_BASIC + +/********************************* SPI Functions *********************************/ + +namespace FTDI { + #if !defined(CLCD_USE_SOFT_SPI) + SPISettings SPI::spi_settings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0); + #endif + + void SPI::spi_init (void) { + SET_OUTPUT(CLCD_MOD_RESET); // Module Reset (a.k.a. PD, not SPI) + WRITE(CLCD_MOD_RESET, 0); // start with module in power-down + + SET_OUTPUT(CLCD_SPI_CS); + WRITE(CLCD_SPI_CS, 1); + + #ifdef SPI_FLASH_SS + SET_OUTPUT(SPI_FLASH_SS); + WRITE(SPI_FLASH_SS, 1); + #endif + + #ifdef CLCD_USE_SOFT_SPI + SET_OUTPUT(CLCD_SOFT_SPI_MOSI); + WRITE(CLCD_SOFT_SPI_MOSI, 1); + + SET_OUTPUT(CLCD_SOFT_SPI_SCLK); + WRITE(CLCD_SOFT_SPI_SCLK, 0); + + SET_INPUT_PULLUP(CLCD_SOFT_SPI_MISO); + #else + ::SPI.begin(); + #endif + } + + #ifdef CLCD_USE_SOFT_SPI + uint8_t SPI::_soft_spi_xfer (uint8_t spiOutByte) { + uint8_t spiIndex = 0x80; + uint8_t spiInByte = 0; + uint8_t k; + + noInterrupts(); + for(k = 0; k <8; k++) { // Output and Read each bit of spiOutByte and spiInByte + if (spiOutByte & spiIndex) { // Output MOSI Bit + WRITE(CLCD_SOFT_SPI_MOSI, 1); + } + else { + WRITE(CLCD_SOFT_SPI_MOSI, 0); + } + WRITE(CLCD_SOFT_SPI_SCLK, 1); // Pulse Clock + WRITE(CLCD_SOFT_SPI_SCLK, 0); + + if (READ(CLCD_SOFT_SPI_MISO)) { + spiInByte |= spiIndex; + } + + spiIndex >>= 1; + } + interrupts(); + return spiInByte; + } + #endif + + #ifdef CLCD_USE_SOFT_SPI + void SPI::_soft_spi_send (uint8_t spiOutByte) { + uint8_t spiIndex = 0x80; + uint8_t k; + + noInterrupts(); + for(k = 0; k <8; k++) { // Output each bit of spiOutByte + if (spiOutByte & spiIndex) { // Output MOSI Bit + WRITE(CLCD_SOFT_SPI_MOSI, 1); + } + else { + WRITE(CLCD_SOFT_SPI_MOSI, 0); + } + WRITE(CLCD_SOFT_SPI_SCLK, 1); // Pulse Clock + WRITE(CLCD_SOFT_SPI_SCLK, 0); + + spiIndex >>= 1; + } + interrupts(); + } + #endif + + void SPI::spi_read_bulk (void *data, uint16_t len) { + uint8_t* p = (uint8_t *)data; + #if !defined(CLCD_USE_SOFT_SPI) + ::SPI.transfer(p, len); + #else + while (len--) *p++ = spi_recv(); + #endif + } + + bool SPI::spi_verify_bulk (const void *data, uint16_t len) { + const uint8_t* p = (const uint8_t *)data; + while (len--) if (*p++ != spi_recv()) return false; + return true; + } + + // CLCD SPI - Chip Select + void SPI::spi_ftdi_select (void) { + #if !defined(CLCD_USE_SOFT_SPI) + ::SPI.beginTransaction(spi_settings); + #endif + WRITE(CLCD_SPI_CS, 0); + delayMicroseconds(1); + } + + // CLCD SPI - Chip Deselect + void SPI::spi_ftdi_deselect (void) { + WRITE(CLCD_SPI_CS, 1); + #if !defined(CLCD_USE_SOFT_SPI) + ::SPI.endTransaction(); + #endif + } + + #ifdef SPI_FLASH_SS + // Serial SPI Flash SPI - Chip Select + void SPI::spi_flash_select () { + #if !defined(CLCD_USE_SOFT_SPI) + ::SPI.beginTransaction(spi_settings); + #endif + WRITE(SPI_FLASH_SS, 0); + delayMicroseconds(1); + } + + // Serial SPI Flash SPI - Chip Deselect + void SPI::spi_flash_deselect () { + WRITE(SPI_FLASH_SS, 1); + #if !defined(CLCD_USE_SOFT_SPI) + ::SPI.endTransaction(); + #endif + } + #endif + + // Not really a SPI signal... + void SPI::ftdi_reset (void) { + WRITE(CLCD_MOD_RESET, 0); + delay(6); /* minimum time for power-down is 5ms */ + WRITE(CLCD_MOD_RESET, 1); + delay(21); /* minimum time to allow from rising PD_N to first access is 20ms */ + } + + // Not really a SPI signal... + void SPI::test_pulse(void) + { + #ifdef CLCD_AUX_0 + WRITE(CLCD_AUX_0, 1); + delayMicroseconds(10); + WRITE(CLCD_AUX_0, 0); + #endif + } +} +#endif // FTDI_BASIC diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h new file mode 100644 index 000000000..c5564eda0 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h @@ -0,0 +1,128 @@ +/********* + * spi.h * + *********/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#if !defined(CLCD_USE_SOFT_SPI) + #include +#endif + +namespace FTDI { + namespace SPI { + #if !defined(CLCD_USE_SOFT_SPI) + extern SPISettings spi_settings; + #endif + + uint8_t _soft_spi_xfer (uint8_t val); + void _soft_spi_send (uint8_t val); + + void spi_init (); + + void spi_ftdi_select (); + void spi_ftdi_deselect (); + + void spi_flash_select (); + void spi_flash_deselect (); + + inline uint8_t spi_recv() { + #ifdef CLCD_USE_SOFT_SPI + return _soft_spi_xfer(0x00); + #else + return ::SPI.transfer(0x00); + #endif + }; + + inline void spi_send (uint8_t val) { + #ifdef CLCD_USE_SOFT_SPI + _soft_spi_send(val); + #else + ::SPI.transfer(val); + #endif + }; + + inline void spi_write_8 (uint8_t val) {spi_send(val);}; + inline uint8_t spi_read_8 () {return spi_recv();}; + + namespace least_significant_byte_first { + inline void spi_write_16 (uint16_t val) {spi_send(val >> 0); + spi_send(val >> 8);}; + inline void spi_write_32 (uint32_t val) {spi_send(val >> 0); + spi_send(val >> 8); + spi_send(val >> 16); + spi_send(val >> 24);}; + + inline uint8_t spi_read_8 () {return spi_recv();}; + inline uint16_t spi_read_16 () {return (((uint16_t) spi_recv()) << 0) | + (((uint16_t) spi_recv()) << 8);}; + inline uint32_t spi_read_32 () {return (((uint32_t) spi_recv()) << 0) | + (((uint32_t) spi_recv()) << 8) | + (((uint32_t) spi_recv()) << 16) | + (((uint32_t) spi_recv()) << 24);}; + } + + namespace most_significant_byte_first { + inline void spi_write_16 (uint16_t val) {spi_send(val >> 8); + spi_send(val >> 0);}; + inline void spi_write_24 (uint32_t val) {spi_send(val >> 16); + spi_send(val >> 8); + spi_send(val >> 0);}; + inline void spi_write_32 (uint32_t val) {spi_send(val >> 24); + spi_send(val >> 16); + spi_send(val >> 8); + spi_send(val >> 0);}; + + inline uint16_t spi_read_16 () {return (((uint16_t) spi_recv()) << 8) | + (((uint16_t) spi_recv()) << 0);}; + inline uint32_t spi_read_32 () {return (((uint32_t) spi_recv()) << 24) | + (((uint32_t) spi_recv()) << 16) | + (((uint32_t) spi_recv()) << 8) | + (((uint32_t) spi_recv()) << 0);}; + } + + inline uint8_t ram_write(const uint8_t *p) {return *p;} + inline uint8_t pgm_write(const uint8_t *p) {return pgm_read_byte(p);} + + typedef uint8_t (*bulk_write_op)(const uint8_t*); + + // Generic template for function for writing multiple bytes, plus padding bytes. + // The template parameter op is an inlineable function which is applied to each byte. + + template + void spi_write_bulk(const void *data, uint16_t len, uint8_t padding) { + const uint8_t* p = (const uint8_t *)data; + while (len--) spi_send(byte_op(p++)); + while (padding--) spi_send(0); + } + + template + void spi_write_bulk(const void *data, uint16_t len) { + const uint8_t* p = (const uint8_t *)data; + while (len--) spi_send(byte_op(p++)); + } + + void spi_read_bulk( void *data, uint16_t len); + bool spi_verify_bulk(const void *data, uint16_t len); + + void ftdi_reset(void); + void test_pulse(void); + } +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h new file mode 100644 index 000000000..9ef90f7a9 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h @@ -0,0 +1,222 @@ +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#include "../config.h" + +#ifdef __MARLIN_FIRMWARE__ + + // Marlin will define the I/O functions for us + #if ENABLED(LULZBOT_TOUCH_UI) + #define FTDI_BASIC + #define FTDI_EXTENDED + #endif + +#else // !__MARLIN_FIRMWARE__ + + #include "Arduino.h" + + #if !defined(CLCD_USE_SOFT_SPI) + #include "SPI.h" + #endif + + namespace fast_io { + + template + struct port_pin { + typedef port_t port; + static inline void set_high() {port::port() = (port::port() | bits);} + static inline void set_low() {port::port() = (port::port() & (~bits));} + static inline void set_input() {port::ddr() = (port::ddr() & (~bits));} + static inline void set_input_pullup() {set_input(); set_high();} + static inline void set_output() {port::ddr() = (port::ddr() | bits);} + static inline uint8_t read() {return port::pin() & bits;} + static inline void write(bool v) {if (v) set_high(); else set_low();} + }; + + #define MAKE_AVR_PORT_PINS(ID) \ + struct port_##ID { \ + static volatile uint8_t &pin() {return PIN##ID;}; \ + static volatile uint8_t &port() {return PORT##ID;}; \ + static volatile uint8_t &ddr() {return DDR##ID;}; \ + }; \ + typedef port_pin AVR_##ID##0; \ + typedef port_pin AVR_##ID##1; \ + typedef port_pin AVR_##ID##2; \ + typedef port_pin AVR_##ID##3; \ + typedef port_pin AVR_##ID##4; \ + typedef port_pin AVR_##ID##5; \ + typedef port_pin AVR_##ID##6; \ + typedef port_pin AVR_##ID##7; + + #ifdef PORTA + MAKE_AVR_PORT_PINS(A); + #endif + #ifdef PORTB + MAKE_AVR_PORT_PINS(B); + #endif + #ifdef PORTC + MAKE_AVR_PORT_PINS(C); + #endif + #ifdef PORTD + MAKE_AVR_PORT_PINS(D); + #endif + #ifdef PORTE + MAKE_AVR_PORT_PINS(E); + #endif + #ifdef PORTF + MAKE_AVR_PORT_PINS(F); + #endif + #ifdef PORTG + MAKE_AVR_PORT_PINS(G); + #endif + #ifdef PORTH + MAKE_AVR_PORT_PINS(H); + #endif + #ifdef PORTJ + MAKE_AVR_PORT_PINS(J); + #endif + #ifdef PORTK + MAKE_AVR_PORT_PINS(K); + #endif + #ifdef PORTL + MAKE_AVR_PORT_PINS(L); + #endif + #ifdef PORTQ + MAKE_AVR_PORT_PINS(Q); + #endif + #ifdef PORTR + MAKE_AVR_PORT_PINS(R); + #endif + + #undef MAKE_AVR_PORT_PINS + + template + struct arduino_digital_pin { + static constexpr uint8_t pin = p; + static inline void set_high() {digitalWrite(p, HIGH);} + static inline void set_low() {digitalWrite(p, LOW);} + static inline void set_input() {pinMode(p, INPUT);} + static inline void set_input_pullup() {pinMode(p, INPUT_PULLUP);} + static inline void set_output() {pinMode(p, OUTPUT);} + static inline uint8_t read() {return digitalRead(p);} + static inline void write(bool v) {digitalWrite(p, v ? HIGH : LOW);} + }; + + #define MAKE_ARDUINO_PINS(ID) typedef arduino_digital_pin ARDUINO_DIGITAL_##ID; + MAKE_ARDUINO_PINS( 0); + MAKE_ARDUINO_PINS( 1); + MAKE_ARDUINO_PINS( 2); + MAKE_ARDUINO_PINS( 3); + MAKE_ARDUINO_PINS( 4); + MAKE_ARDUINO_PINS( 5); + MAKE_ARDUINO_PINS( 6); + MAKE_ARDUINO_PINS( 7); + MAKE_ARDUINO_PINS( 8); + MAKE_ARDUINO_PINS( 9); + MAKE_ARDUINO_PINS(10); + MAKE_ARDUINO_PINS(11); + MAKE_ARDUINO_PINS(12); + MAKE_ARDUINO_PINS(13); + MAKE_ARDUINO_PINS(14); + MAKE_ARDUINO_PINS(15); + MAKE_ARDUINO_PINS(16); + MAKE_ARDUINO_PINS(17); + MAKE_ARDUINO_PINS(18); + MAKE_ARDUINO_PINS(19); + MAKE_ARDUINO_PINS(10); + MAKE_ARDUINO_PINS(21); + MAKE_ARDUINO_PINS(22); + MAKE_ARDUINO_PINS(23); + MAKE_ARDUINO_PINS(24); + MAKE_ARDUINO_PINS(25); + MAKE_ARDUINO_PINS(26); + MAKE_ARDUINO_PINS(27); + MAKE_ARDUINO_PINS(28); + MAKE_ARDUINO_PINS(29); + MAKE_ARDUINO_PINS(30); + MAKE_ARDUINO_PINS(31); + MAKE_ARDUINO_PINS(32); + MAKE_ARDUINO_PINS(33); + MAKE_ARDUINO_PINS(34); + MAKE_ARDUINO_PINS(35); + MAKE_ARDUINO_PINS(36); + MAKE_ARDUINO_PINS(37); + MAKE_ARDUINO_PINS(38); + MAKE_ARDUINO_PINS(39); + MAKE_ARDUINO_PINS(40); + MAKE_ARDUINO_PINS(41); + MAKE_ARDUINO_PINS(42); + MAKE_ARDUINO_PINS(43); + MAKE_ARDUINO_PINS(44); + MAKE_ARDUINO_PINS(45); + MAKE_ARDUINO_PINS(46); + MAKE_ARDUINO_PINS(47); + MAKE_ARDUINO_PINS(48); + MAKE_ARDUINO_PINS(49); + MAKE_ARDUINO_PINS(50); + MAKE_ARDUINO_PINS(51); + MAKE_ARDUINO_PINS(52); + MAKE_ARDUINO_PINS(53); + #undef MAKE_ARDUINO_PINS + } // namespace fast_io + + #define SET_INPUT(pin) fast_io::pin::set_input() + #define SET_INPUT_PULLUP(pin) fast_io::pin::set_input(); fast_io::pin::set_high() + #define SET_OUTPUT(pin) fast_io::pin::set_output() + #define READ(pin) fast_io::pin::read() + #define WRITE(pin, value) fast_io::pin::write(value) + + #ifndef pgm_read_word_far + #define pgm_read_word_far pgm_read_word + #endif + + #ifndef pgm_read_dword_far + #define pgm_read_dword_far pgm_read_dword + #endif + + #ifndef pgm_read_ptr_far + #define pgm_read_ptr_far pgm_read_ptr + #endif + + #define SERIAL_ECHO_START() + #define SERIAL_ECHOLNPGM(str) Serial.println(F(str)) + #define SERIAL_ECHOPGM(str) Serial.print(F(str)) + #define SERIAL_ECHOLNPAIR(str, val) {Serial.print(F(str)); Serial.println(val);} + #define SERIAL_ECHOPAIR(str, val) {Serial.print(F(str)); Serial.print(val);} + + #define safe_delay delay + + // Define macros for compatibility + + #define _CAT(a, ...) a ## __VA_ARGS__ + #define SWITCH_ENABLED_ 1 + #define ENABLED(b) _CAT(SWITCH_ENABLED_, b) + #define DISABLED(b) !ENABLED(b) + #define ANY(A,B) ENABLED(A) || ENABLED(B) + + // Remove compiler warning on an unused variable + #ifndef UNUSED + #if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) + #define UNUSED(X) (void)X + #else + #define UNUSED(x) ((void)(x)) + #endif + #endif + +#endif // !__MARLIN_FIRMWARE__ diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/bitmap_info.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/bitmap_info.h new file mode 100644 index 000000000..2a095c344 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/bitmap_info.h @@ -0,0 +1,49 @@ +/***************** + * bitmap_info.h * + *****************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#ifndef FORCEDINLINE + #define FORCEDINLINE __attribute__((always_inline)) inline +#endif + +namespace FTDI { + // The following functions *must* be inlined since we are relying on the compiler to do + // substitution of the constants from the data structure rather than actually storing + // it in PROGMEM (which would fail, since we are not using pgm_read to read them). + // Plus, by inlining, all the equations are evaluated at compile-time as everything + // should be a constant. + + typedef struct { + const uint8_t format; + const uint16_t linestride; + const uint8_t filter; + const uint8_t wrapx; + const uint8_t wrapy; + const uint32_t RAMG_offset; + const uint16_t width; + const uint16_t height; + } bitmap_info_t; + + FORCEDINLINE uint32_t BITMAP_SOURCE (const bitmap_info_t& info) {return BITMAP_SOURCE (ftdi_memory_map::RAM_G + info.RAMG_offset);}; + FORCEDINLINE uint32_t BITMAP_LAYOUT (const bitmap_info_t& info) {return BITMAP_LAYOUT (info.format, info.linestride, info.height);}; + FORCEDINLINE uint32_t BITMAP_SIZE (const bitmap_info_t& info) {return BITMAP_SIZE (info.filter, info.wrapx, info.wrapy, info.width, info.height);} +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.cpp new file mode 100644 index 000000000..08d208202 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.cpp @@ -0,0 +1,29 @@ +/************************* + * command_processor.cpp * + *************************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "ftdi_extended.h" + +#ifdef FTDI_EXTENDED + +CommandProcessor::btn_style_func_t *CommandProcessor::_btn_style_callback = CommandProcessor::default_button_style_func; +bool CommandProcessor::is_tracking = false; + +#endif // FTDI_EXTENDED diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.h new file mode 100644 index 000000000..4ec54395b --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.h @@ -0,0 +1,347 @@ +/*********************** + * command_processor.h * + ***********************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +typedef struct { + uint32_t bg; + uint32_t grad; + uint32_t fg; + uint32_t rgb; +} btn_colors; + +/**************************** Enhanced Command Processor **************************/ + +/* The CommandProcessor class wraps the CommandFifo with several features to make + * defining user interfaces much easier. + * + * - Implements chaining on all methods + * - Automatically adds text to button, toggle, text and keys. + * - Constrains all widgets to fit inside a box for ease of layout. + * - Font size is specified using a chained modifier. + * - Option argument is given the default OPT_3D value. + */ + +class CommandProcessor : public CLCD::CommandFifo { + public: + static constexpr uint8_t STYLE_DISABLED = 0x80; + + private: + static bool default_button_style_func(CommandProcessor &, uint8_t tag, uint8_t & /*style*/, uint16_t &options, bool) { + if (tag != 0 && FTDI::EventLoop::get_pressed_tag() == tag) { + options = FTDI::OPT_FLAT; + } + return false; + } + + typedef bool btn_style_func_t(CommandProcessor &cmd, uint8_t tag, uint8_t &style, uint16_t &options, bool post); + + static btn_style_func_t *_btn_style_callback; + static bool is_tracking; + int8_t _font = 26, _tag = 0; + uint8_t _style = 0; + + protected: + // Returns the cannonical thickness of a widget (i.e. the height of a toggle element) + uint16_t widget_thickness() { + CLCD::FontMetrics fm(_font); + return fm.height * 20.0/16; + } + + FORCEDINLINE void linear_widget_box(int16_t &x, int16_t &y, int16_t &w, int16_t &h, bool tracker = false) { + const uint16_t th = widget_thickness()/2; + if (w > h) { + x += tracker ? th * 2.5 : th; + y += h/2 - th/2; + w -= tracker ? th * 5.0 : th * 2; + h = th; + } else { + x += w/2 - th/2; + y += tracker ? th * 2.5 : th; + w = th; + h -= tracker ? th * 5.0 : th * 2; + } + } + + FORCEDINLINE uint16_t circular_widget_box(int16_t &x, int16_t &y, int16_t &w, int16_t &h) { + const uint16_t r = min(w,h)/2; + x += w/2; + y += h/2; + w = 1; + h = 1; + return r; + } + + public: + // Helper method for setting all colors at once + inline CommandProcessor& colors(const btn_colors &colors) { + cmd(FTDI::COLOR_RGB(colors.rgb)) + .gradcolor(colors.grad) + .fgcolor(colors.fg) + .bgcolor(colors.bg); + return *this; + } + + inline CommandProcessor& bitmap_size(uint8_t filter, uint8_t wrapx, uint8_t wrapy, uint16_t width, uint16_t height) { + cmd(FTDI::BITMAP_SIZE(filter, wrapx, wrapy, width, height)); + #if FTDI_API_LEVEL >= 810 + if (FTDI::ftdi_chip >= 810) + cmd(FTDI::BITMAP_SIZE_H(width >> 9, height >> 9)); + #endif + return *this; + } + + inline CommandProcessor& bitmap_layout(uint8_t format, uint16_t linestride, uint16_t height) { + cmd(FTDI::BITMAP_LAYOUT(format, linestride, height)); + #if FTDI_API_LEVEL >= 810 + if (FTDI::ftdi_chip >= 810) + cmd(FTDI::BITMAP_LAYOUT_H(linestride >> 10, height >> 9)); + #endif + return *this; + } + + inline CommandProcessor& set_button_style_callback(const btn_style_func_t *func) { + _btn_style_callback = func ? func : default_button_style_func; + return *this; + } + + inline CommandProcessor& tag (uint8_t tag) {_tag = tag; cmd(FTDI::TAG(tag)); return *this;} + + inline CommandProcessor& font (int16_t font) {_font = font; return *this;} + + inline CommandProcessor& enabled (bool enabled) { + if (enabled) + _style &= ~STYLE_DISABLED; + else + _style |= STYLE_DISABLED; + return *this; + } + + inline CommandProcessor& style (uint8_t style) { + _style = (_style & STYLE_DISABLED) | style; + return *this; + } + + // Wrap all the CommandFifo routines to allow method chaining + + inline CommandProcessor& cmd (uint32_t cmd32) {CLCD::CommandFifo::cmd(cmd32); return *this;} + inline CommandProcessor& cmd (void* data, uint16_t len) {CLCD::CommandFifo::cmd(data, len); return *this;} + inline CommandProcessor& execute() {CLCD::CommandFifo::execute(); return *this;} + + inline CommandProcessor& fgcolor (uint32_t rgb) {CLCD::CommandFifo::fgcolor(rgb); return *this;} + inline CommandProcessor& bgcolor (uint32_t rgb) {CLCD::CommandFifo::bgcolor(rgb); return *this;} + inline CommandProcessor& gradcolor(uint32_t rgb) {CLCD::CommandFifo::gradcolor(rgb); return *this;} + + inline CommandProcessor& snapshot (uint32_t ptr) {CLCD::CommandFifo::snapshot(ptr); return *this;} + + inline CommandProcessor& loadimage(uint32_t ptr, uint32_t options) + {CLCD::CommandFifo::loadimage(ptr, options); return *this;} + inline CommandProcessor& sketch (int16_t x, int16_t y, uint16_t w, uint16_t h, uint32_t ptr, uint16_t format) + {CLCD::CommandFifo::sketch(x, y, w, h, ptr, format); return *this;} + inline CommandProcessor& screensaver () {CLCD::CommandFifo::screensaver(); return *this;} + #if FTDI_API_LEVEL >= 810 + inline CommandProcessor& setbase (uint8_t base) {CLCD::CommandFifo::setbase(base); return *this;} + #endif + inline CommandProcessor& loadidentity () {CLCD::CommandFifo::loadidentity(); return *this;} + inline CommandProcessor& scale (int32_t sx, int32_t sy) {CLCD::CommandFifo::scale(sx,sy); return *this;} + inline CommandProcessor& rotate (int32_t a) {CLCD::CommandFifo::rotate(a); return *this;} + inline CommandProcessor& translate(int32_t tx, int32_t ty) {CLCD::CommandFifo::translate(tx,ty); return *this;} + inline CommandProcessor& setmatrix () {CLCD::CommandFifo::setmatrix(); return *this;} + inline CommandProcessor& stop () {CLCD::CommandFifo::stop(); return *this;} + + inline CommandProcessor& memzero (uint32_t ptr, uint32_t size) + {CLCD::CommandFifo::memzero(ptr, size); return *this;} + inline CommandProcessor& memset (uint32_t ptr, uint32_t val, uint32_t size) + {CLCD::CommandFifo::memset(ptr, val, size); return *this;} + inline CommandProcessor& memcpy (uint32_t src, uint32_t dst, uint32_t size) + {CLCD::CommandFifo::memcpy(src, dst, size); return *this;} + inline CommandProcessor& memcrc (uint32_t ptr, uint32_t num, uint32_t result) + {CLCD::CommandFifo::memcrc(ptr, num, result); return *this;} + inline CommandProcessor& memwrite (uint32_t ptr, uint32_t value) + {CLCD::CommandFifo::memwrite(ptr, value); return *this;} + inline CommandProcessor& inflate (uint32_t ptr) + {CLCD::CommandFifo::inflate(ptr); return *this;} + inline CommandProcessor& getptr (uint32_t result) + {CLCD::CommandFifo::getptr(result); return *this;} + inline CommandProcessor& getprops (uint32_t ptr, uint32_t width, uint32_t height) + {CLCD::CommandFifo::getprops(ptr, width, height); return *this;} + + #if FTDI_API_LEVEL >= 810 + inline CommandProcessor& setbitmap (uint32_t ptr, uint16_t fmt, uint16_t w, uint16_t h) + {CLCD::CommandFifo::setbitmap(ptr,fmt,w,h); return *this;} + inline CommandProcessor& snapshot2 (uint32_t fmt, uint32_t ptr, int16_t x, int16_t y, uint16_t w, uint16_t h) + {CLCD::CommandFifo::snapshot2(fmt,ptr,x,y,w,h); return *this;} + inline CommandProcessor& mediafifo (uint32_t p, uint32_t s) {CLCD::CommandFifo::mediafifo(p, s); return *this;} + inline CommandProcessor& playvideo(uint32_t options) {CLCD::CommandFifo::playvideo(options); return *this;} + #endif + + inline CommandProcessor& gradient(int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1) + {CLCD::CommandFifo::gradient(x0,y0,rgb0,x1,y1,rgb1); return *this;} + + inline CommandProcessor& rectangle(int16_t x, int16_t y, int16_t w, int16_t h) { + using namespace FTDI; + CLCD::CommandFifo::cmd(BEGIN(RECTS)); + CLCD::CommandFifo::cmd(VERTEX2F(x*16,y*16)); + CLCD::CommandFifo::cmd(VERTEX2F((x+w)*16,(y+h)*16)); + return *this; + } + + template + FORCEDINLINE CommandProcessor& toggle(int16_t x, int16_t y, int16_t w, int16_t h, T text, bool state, uint16_t options = FTDI::OPT_3D) { + CLCD::FontMetrics fm(_font); + const int16_t widget_h = fm.height * 20.0/16; + //const int16_t outer_bar_r = widget_h / 2; + //const int16_t knob_r = outer_bar_r - 1.5; + // The y coordinate of the toggle is the baseline of the text, + // so we must introduce a fudge factor based on the line height to + // actually center the control. + const int16_t fudge_y = fm.height*5/16; + CLCD::CommandFifo::toggle(x + h/2, y + h/2 - widget_h/2 + fudge_y, w - h, _font, options, state); + CLCD::CommandFifo::str(text); + return *this; + } + + // Contrained drawing routines. These constrain the widget inside a box for easier layout. + // The FORCEDINLINE ensures that the code is inlined so that all the math is done at compile time. + + FORCEDINLINE CommandProcessor& track_linear(int16_t x, int16_t y, int16_t w, int16_t h, int16_t tag) { + linear_widget_box(x, y, w, h, true); + CLCD::CommandFifo::track(x, y, w, h, tag); + is_tracking = true; + return *this; + } + + FORCEDINLINE CommandProcessor& track_circular(int16_t x, int16_t y, int16_t w, int16_t h, int16_t tag) { + circular_widget_box(x,y, w, h); + CLCD::CommandFifo::track(x, y, w, h, tag); + is_tracking = true; + return *this; + } + + uint8_t track_tag (uint16_t &value) { + if (is_tracking) { + if (FTDI::EventLoop::is_touch_held()) { + return CLCD::get_tracker(value); + } else { + CLCD::CommandFifo::track(0, 0, 0, 0, 0); + CLCD::CommandFifo::execute(); + is_tracking = false; + } + } + return 0; + } + + FORCEDINLINE CommandProcessor& clock(int16_t x, int16_t y, int16_t w, int16_t h, int16_t hr, int16_t m, int16_t s, int16_t ms, uint16_t options = FTDI::OPT_3D) { + const uint16_t r = circular_widget_box(x, y, w, h); + CLCD::CommandFifo::clock(x, y, r, options, hr, m, s, ms); + return *this; + } + + FORCEDINLINE CommandProcessor& gauge(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t major, uint16_t minor, uint16_t val, uint16_t range, uint16_t options = FTDI::OPT_3D) { + const uint16_t r = circular_widget_box(x, y, w, h); + CLCD::CommandFifo::gauge(x, y, r, options, major, minor, val, range); + return *this; + } + + FORCEDINLINE CommandProcessor& dial(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t val, uint16_t options = FTDI::OPT_3D) { + const uint16_t r = circular_widget_box(x, y, w, h); + CLCD::CommandFifo::dial(x, y, r, options, val); + return *this; + } + + FORCEDINLINE CommandProcessor& slider(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t val, uint16_t range, uint16_t options = FTDI::OPT_3D) { + linear_widget_box(x, y, w, h); + CLCD::CommandFifo::slider(x, y, w, h, options, val, range); + return *this; + } + + FORCEDINLINE CommandProcessor& progress(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t val, uint16_t range, uint16_t options = FTDI::OPT_3D) { + linear_widget_box(x, y, w, h); + CLCD::CommandFifo::progress(x, y, w, h, options, val, range); + return *this; + } + + FORCEDINLINE CommandProcessor& scrollbar(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t val, uint16_t size, uint16_t range, uint16_t options = 0) { + linear_widget_box(x, y, w, h); + CLCD::CommandFifo::scrollbar(x, y, w, h, options, val, size, range); + return *this; + } + + CommandProcessor& number(int16_t x, int16_t y, int16_t w, int16_t h, int32_t n, uint16_t options = FTDI::OPT_CENTER) { + using namespace FTDI; + CLCD::CommandFifo::number( + x + ((options & OPT_CENTERX) ? w/2 : ((options & OPT_RIGHTX) ? w : 0)), + y + ((options & OPT_CENTERY) ? h/2 : h), + _font, options, n); + return *this; + } + + template FORCEDINLINE + CommandProcessor& text(int16_t x, int16_t y, int16_t w, int16_t h, T text, uint16_t options = FTDI::OPT_CENTER) { + using namespace FTDI; + CLCD::CommandFifo::text( + x + ((options & OPT_CENTERX) ? w/2 : ((options & OPT_RIGHTX) ? w : 0)), + y + ((options & OPT_CENTERY) ? h/2 : h), + _font, options); + CLCD::CommandFifo::str(text); + return *this; + } + + FORCEDINLINE CommandProcessor& icon(int16_t x, int16_t y, int16_t w, int16_t h, const FTDI::bitmap_info_t& info, const float scale = 1) { + using namespace FTDI; + cmd(BEGIN(BITMAPS)); + if (scale != 1) { + cmd(BITMAP_TRANSFORM_A(uint32_t(float(256)/scale))); + cmd(BITMAP_TRANSFORM_E(uint32_t(float(256)/scale))); + } + cmd(BITMAP_SIZE(info.filter, info.wrapx, info.wrapy, info.width*scale, info.height*scale)); + cmd(VERTEX2F((x + w/2 - info.width*scale/2)*16, (y + h/2 - info.height*scale/2)*16)); + if (scale != 1) { + cmd(BITMAP_TRANSFORM_A(256)); + cmd(BITMAP_TRANSFORM_E(256)); + } + return *this; + } + + template + CommandProcessor& button(int16_t x, int16_t y, int16_t w, int16_t h, T text, uint16_t options = FTDI::OPT_3D) { + using namespace FTDI; + bool styleModified = false; + if (_btn_style_callback) styleModified = _btn_style_callback(*this, _tag, _style, options, false); + CLCD::CommandFifo::button(x, y, w, h, _font, options); + CLCD::CommandFifo::str(text); + if (_btn_style_callback && styleModified) _btn_style_callback(*this, _tag, _style, options, true); + return *this; + } + + template + CommandProcessor& keys(int16_t x, int16_t y, int16_t w, int16_t h, T keys, uint16_t options = FTDI::OPT_3D) { + CLCD::CommandFifo::keys(x, y, w, h, _font, options); + CLCD::CommandFifo::str(keys); + return *this; + } + + FORCEDINLINE CommandProcessor& spinner(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t style = 0, uint16_t scale = 0) { + circular_widget_box(x, y, w, h); + CLCD::CommandFifo::spinner(x, y, style, scale); + return *this; + } +}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.cpp new file mode 100644 index 000000000..fd6fde5f5 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.cpp @@ -0,0 +1,176 @@ +/**************** + * dl_cache.cpp * + ****************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "ftdi_extended.h" + +#ifdef FTDI_EXTENDED + +/* The Display List Cache mechanism stores the display list corresponding + * to a menu into RAM_G so that on subsequent calls drawing the menu does + * not require as much SPI traffic. + * + * Layout of Cache memory: + * + * The cache memory begins with a table at + * DL_CACHE_START: each table entry contains + * an address and size for a cached DL slot. + * + * Immediately following the table is the + * DL_FREE_ADDR, which points to free cache + * space; following this is occupied DL space, + * and after that free space that is yet to + * be used. + * + * location data sizeof + * + * DL_CACHE_START slot0_addr 4 + * slot0_size 4 + * slot1_addr 4 + * slot1_size 4 + * ... + * slotN_addr 4 + * slotN_size 4 + * DL_FREE_ADDR dl_free_ptr 4 + * cached data + * ... + * dl_free_ptr empty space + * ... + */ + +#define DL_CACHE_START MAP::RAM_G_SIZE - 0xFFFF +#define DL_FREE_ADDR DL_CACHE_START + DL_CACHE_SLOTS * 8 + +using namespace FTDI; + +// The init function ensures all cache locations are marked as empty + +void DLCache::init() { + CLCD::mem_write_32(DL_FREE_ADDR, DL_FREE_ADDR + 4); + for(uint8_t slot = 0; slot < DL_CACHE_SLOTS; slot++) { + save_slot(slot, 0, 0); + } +} + +bool DLCache::has_data() { + return dl_size != 0; +} + +bool DLCache::wait_until_idle() { + const unsigned long startTime = millis(); + do { + if ((millis() - startTime) > 250) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Timeout on DL_Cache::Wait_Until_Idle()"); + CLCD::CommandFifo::reset(); + return false; + } + #ifdef __MARLIN_FIRMWARE__ + ExtUI::yield(); + #endif + } while (CLCD::CommandFifo::is_processing()); + return true; +} + +/* This caches the current display list in RAMG so + * that it can be appended later. The memory is + * dynamically allocated following DL_FREE_ADDR. + * + * If num_bytes is provided, then that many bytes + * will be reserved so that the cache may be re-written + * later with potentially a bigger DL. + */ + +bool DLCache::store(uint32_t num_bytes /* = 0*/) { + CLCD::CommandFifo cmd; + + // Execute any commands already in the FIFO + cmd.execute(); + if (!wait_until_idle()) + return false; + + // Figure out how long the display list is + uint32_t new_dl_size = CLCD::mem_read_32(REG::CMD_DL) & 0x1FFF; + uint32_t free_space = 0; + uint32_t dl_alloc = 0; + + if (dl_addr == 0) { + // If we are allocating new space... + dl_addr = CLCD::mem_read_32(DL_FREE_ADDR); + free_space = MAP::RAM_G_SIZE - dl_addr; + dl_alloc = num_bytes ? num_bytes : new_dl_size; + dl_size = new_dl_size; + } else { + // Otherwise, we can only store as much space + // as was previously allocated. + free_space = num_bytes ? num_bytes : dl_size; + dl_alloc = 0; + dl_size = new_dl_size; + } + + if (dl_size > free_space) { + // Not enough memory to cache the display list. + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Not enough space in GRAM to cache display list, free space: ", free_space); + SERIAL_ECHOLNPAIR(" Required: ", dl_size); + #endif + return false; + } else { + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Saving DL to RAMG cache, bytes: ", dl_size); + SERIAL_ECHOLNPAIR(" Free space: ", free_space); + #endif + cmd.memcpy(dl_addr, MAP::RAM_DL, dl_size); + cmd.execute(); + save_slot(dl_slot, dl_addr, dl_size); + if (dl_alloc > 0) { + // If we allocated space dynamically, then adjust dl_free_addr. + CLCD::mem_write_32(DL_FREE_ADDR, dl_addr + dl_alloc); + } + return true; + } +} + +void DLCache::save_slot(uint8_t dl_slot, uint32_t dl_addr, uint32_t dl_size) { + CLCD::mem_write_32(DL_CACHE_START + dl_slot * 8 + 0, dl_addr); + CLCD::mem_write_32(DL_CACHE_START + dl_slot * 8 + 4, dl_size); +} + +void DLCache::load_slot() { + dl_addr = CLCD::mem_read_32(DL_CACHE_START + dl_slot * 8 + 0); + dl_size = CLCD::mem_read_32(DL_CACHE_START + dl_slot * 8 + 4); +} + +void DLCache::append() { + CLCD::CommandFifo cmd; + cmd.append(dl_addr, dl_size); + #ifdef UI_FRAMEWORK_DEBUG + cmd.execute(); + wait_until_idle(); + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Appending to DL from RAMG cache, bytes: ", dl_size); + SERIAL_ECHOLNPAIR(" REG_CMD_DL: ", CLCD::mem_read_32(REG::CMD_DL)); + #endif +} + +#endif // FTDI_EXTENDED diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.h new file mode 100644 index 000000000..f025b6a18 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.h @@ -0,0 +1,69 @@ +/************** + * dl_cache.h * + **************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +/******************* DISPLAY LIST CACHE MANAGEMENT ************************/ +/* The Display List Cache mechanism stores the display list corresponding + * to a menu into RAM_G so that on subsequent calls drawing the menu does + * not require as much SPI traffic. Dynamic content, such as indicators, + * should not be cached. + * + * The DLCache can be used like so: + * + * void some_function() { + * DLCache dlcache(UNIQUE_ID); + * + * if (dlcache.hasData()) { + * dlcache.append(); + * } else { + * // Add stuff to the DL + * dlcache.store(); + * } + */ +class DLCache { + private: + typedef FTDI::ftdi_registers REG; + typedef FTDI::ftdi_memory_map MAP; + + uint8_t dl_slot; + uint32_t dl_addr; + uint16_t dl_size; + + void load_slot(); + static void save_slot(uint8_t dl_slot, uint32_t dl_addr, uint32_t dl_size); + + bool wait_until_idle(); + + public: + static void init(); + + DLCache(uint8_t slot) { + dl_slot = slot; + load_slot(); + } + + bool has_data(); + bool store(uint32_t num_bytes = 0); + void append(); +}; + +#define DL_CACHE_SLOTS 250 diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.cpp new file mode 100644 index 000000000..a9194fdab --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.cpp @@ -0,0 +1,230 @@ +/****************** + * event_loop.cpp * + ******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "ftdi_extended.h" + +#ifdef FTDI_EXTENDED +using namespace FTDI; + +enum { + UNPRESSED = 0x00 +}; + +tiny_timer_t touch_timer; +UIData::flags_t UIData::flags; +uint8_t pressed_tag = UNPRESSED; + +uint8_t UIData::get_persistent_data_mask() { + // A bit mask for flags that should be stored to the EEPROM. + // Others are considered temporarily values that need not be + // saved. + constexpr flags_t persistent_flags = { + bits: { + touch_start_sound: true, + touch_end_sound: true, + touch_repeat_sound: true, + show_animations: true + } + }; + return persistent_flags.value; +} + +void UIData::reset_persistent_data() { + // Default values for persistent data + constexpr flags_t default_flags = { + bits: { + touch_start_sound: true, + touch_end_sound: true, + touch_repeat_sound: true, + show_animations: true, + touch_debouncing: false, + ignore_unpress: false + } + }; + flags.value = default_flags.value; +} + +uint8_t UIData::get_persistent_data() { + return flags.value & get_persistent_data_mask(); +} + +void UIData::set_persistent_data(uint8_t value) { + flags.value = value & get_persistent_data_mask(); +} + + +void UIData::enable_touch_sounds(bool enabled) { + UIData::flags.bits.touch_start_sound = enabled; + UIData::flags.bits.touch_end_sound = enabled; + UIData::flags.bits.touch_repeat_sound = enabled; +} + +bool UIData::touch_sounds_enabled() { + return UIData::flags.bits.touch_start_sound || UIData::flags.bits.touch_end_sound || UIData::flags.bits.touch_repeat_sound; +} + +void UIData::enable_animations(bool enabled) { + UIData::flags.bits.show_animations = enabled; +} + +bool UIData::animations_enabled() { + return UIData::flags.bits.show_animations; +} + +namespace FTDI { + uint8_t EventLoop::get_pressed_tag() { + return pressed_tag; + } + + bool EventLoop::is_touch_held() { + return pressed_tag != 0; + } + + /** + * process_events(): Process events from the touch panel. + * + * This function consists of a state machine that accomplishes the following: + * + * - Reads the tag register from the touch panel + * - Dispatches onTouchStart and onTouchEnd events to the active screen. + * - Handles auto-repetition by sending onTouchHeld to the active screen periodically. + * - Plays touch feedback "click" sounds when appropriate. + * - Performs debouncing to supress spurious touch events. + * + */ + void EventLoop::process_events() { + // If the LCD is processing commands, don't check + // for tags since they may be changing and could + // cause spurious events. + if (!touch_timer.elapsed(TOUCH_UPDATE_INTERVAL) || CLCD::CommandFifo::is_processing()) { + return; + } + + const uint8_t tag = CLCD::get_tag(); + + switch (pressed_tag) { + case UNPRESSED: + if (tag != 0) { + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("Touch start: ", tag); + #endif + + pressed_tag = tag; + current_screen.onRefresh(); + + // When the user taps on a button, activate the onTouchStart handler + const uint8_t lastScreen = current_screen.getScreen(); + + if (current_screen.onTouchStart(tag)) { + touch_timer.start(); + if (UIData::flags.bits.touch_start_sound) sound.play(press_sound); + } + + if (lastScreen != current_screen.getScreen()) { + // In the case in which a touch event triggered a new screen to be + // drawn, we don't issue a touchEnd since it would be sent to the + // wrong screen. + UIData::flags.bits.ignore_unpress = true; + } else { + UIData::flags.bits.ignore_unpress = false; + } + } else { + touch_timer.start(); + } + break; + default: // PRESSED + if (!UIData::flags.bits.touch_debouncing) { + if (tag == pressed_tag) { + // The user is holding down a button. + if (touch_timer.elapsed(1000 / TOUCH_REPEATS_PER_SECOND) && current_screen.onTouchHeld(tag)) { + current_screen.onRefresh(); + if (UIData::flags.bits.touch_repeat_sound) sound.play(repeat_sound); + touch_timer.start(); + } + } + else if (tag == 0) { + touch_timer.start(); + UIData::flags.bits.touch_debouncing = true; + } + } + + else { + // Debouncing... + + if (tag == pressed_tag) { + // If while debouncing, we detect a press, then cancel debouncing. + UIData::flags.bits.touch_debouncing = false; + } + + else if (touch_timer.elapsed(DEBOUNCE_PERIOD)) { + UIData::flags.bits.touch_debouncing = false; + + if (UIData::flags.bits.ignore_unpress) { + UIData::flags.bits.ignore_unpress = false; + pressed_tag = UNPRESSED; + break; + } + + if (UIData::flags.bits.touch_end_sound) sound.play(unpress_sound); + + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("Touch end: ", tag); + #endif + + const uint8_t saved_pressed_tag = pressed_tag; + pressed_tag = UNPRESSED; + current_screen.onTouchEnd(saved_pressed_tag); + current_screen.onRefresh(); + } + } + break; + } // switch (pressed_tag) + + } // processEvents() + + void EventLoop::setup() { + CLCD::init(); + DLCache::init(); + UIData::reset_persistent_data(); + current_screen.start(); + } + + void EventLoop::loop() { + sound.onIdle(); + + /** + * Guard against re-entry of UI methods, which can + * crash. Re-entry can happen because some functions + * (e.g. planner.synchronize) call idle(). + */ + if (!UIData::flags.bits.prevent_reentry) { + UIData::flags.bits.prevent_reentry = true; + current_screen.onIdle(); + process_events(); + UIData::flags.bits.prevent_reentry = false; + } + } +} // namespace FTDI + +#endif // FTDI_EXTENDED diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.h new file mode 100644 index 000000000..7eeea9c81 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.h @@ -0,0 +1,74 @@ +/**************** + * event_loop.h * + ****************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#define STATUS_UPDATE_INTERVAL 1000 +#define TOUCH_UPDATE_INTERVAL 50 +#define TOUCH_REPEATS_PER_SECOND 4 +#define DEBOUNCE_PERIOD 150 + +class UIData { + private: + typedef union { + struct { + uint8_t touch_start_sound : 1; + uint8_t touch_end_sound : 1; + uint8_t touch_repeat_sound : 1; + uint8_t show_animations : 1; + uint8_t touch_debouncing : 1; + uint8_t ignore_unpress : 1; + uint8_t prevent_reentry : 1; + } bits; + uint8_t value; + } flags_t; + + public: + static flags_t flags; + + static uint8_t get_persistent_data_mask(); + static uint8_t get_persistent_data(); + static void set_persistent_data(uint8_t value); + static void reset_persistent_data(); + + static void enable_touch_sounds(bool enabled); + static bool touch_sounds_enabled(); + static void enable_animations(bool enabled); + static bool animations_enabled(); +}; + +namespace FTDI { + class EventLoop { + private: + static constexpr FTDI::effect_t press_sound = FTDI::CHACK; + static constexpr FTDI::effect_t repeat_sound = FTDI::CHACK; + static constexpr FTDI::effect_t unpress_sound = FTDI::POP; + static void process_events(); + + public: + static void setup(); + static void loop(); + + static uint8_t get_pressed_tag(); + static bool is_touch_held(); + }; +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h new file mode 100644 index 000000000..43e390c1a --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h @@ -0,0 +1,45 @@ +/******************* + * ftdi_extended.h * + *******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2019 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 201( - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#include "../compat.h" +#include "../basic/ftdi_basic.h" + +#if !defined(__MARLIN_FIRMWARE__) + #define FTDI_EXTENDED +#endif + +#ifdef FTDI_EXTENDED + #include "rgb_t.h" + #include "bitmap_info.h" + #include "tiny_timer.h" + #include "grid_layout.h" + #include "dl_cache.h" + #include "screen_types.h" + #include "event_loop.h" + #include "command_processor.h" + #include "sound_player.h" + #include "sound_list.h" + #include "polygon.h" + #include "text_box.h" +#endif diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/grid_layout.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/grid_layout.h new file mode 100644 index 000000000..ec8154b22 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/grid_layout.h @@ -0,0 +1,98 @@ +/***************** + * grid_layout.h * + *****************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +/* The grid layout macros allow buttons to be arranged on a grid so + * that their locations become independent of the display size. The + * layout model is similar to that of HTML TABLEs. + * + * These macros are meant to be evaluated into constants at compile + * time, so resolution independence can be as efficient as using + * hard-coded coordinates. + */ + +// Margin defines the margin (in pixels) on each side of a button in +// the layout + +#ifdef TOUCH_UI_800x480 + #define MARGIN_L 5 + #define MARGIN_R 5 + #define MARGIN_T 5 + #define MARGIN_B 5 + #define MARGIN_DEFAULT 5 +#else + #define MARGIN_L 3 + #define MARGIN_R 3 + #define MARGIN_T 3 + #define MARGIN_B 3 + #define MARGIN_DEFAULT 3 +#endif + +// EDGE_R adds some black space on the right edge of the display +// This shifts some of the screens left to visually center them. + +#define EDGE_R 0 + +// GRID_X and GRID_Y computes the positions of the divisions on +// the layout grid. +#define GRID_X(x) ((x)*(FTDI::display_width-EDGE_R)/GRID_COLS) +#define GRID_Y(y) ((y)*FTDI::display_height/GRID_ROWS) + +// BTN_X, BTN_Y, BTN_W and BTN_X returns the top-left and width +// and height of a button, taking into account the button margins. + +#define BTN_X(x) (GRID_X((x)-1) + MARGIN_L) +#define BTN_Y(y) (GRID_Y((y)-1) + MARGIN_T) +#define BTN_W(w) (GRID_X(w) - MARGIN_L - MARGIN_R) +#define BTN_H(h) (GRID_Y(h) - MARGIN_T - MARGIN_B) + +// Abbreviations for common phrases, to allow a button to be +// defined in one line of source. +#define BTN_POS(x,y) BTN_X(x), BTN_Y(y) +#define BTN_SIZE(w,h) BTN_W(w), BTN_H(h) + +// Draw a reference grid for ease of spacing out widgets. +#define DRAW_LAYOUT_GRID \ + { \ + cmd.cmd(LINE_WIDTH(4)); \ + for(int i = 1; i <= GRID_COLS; i++) { \ + cmd.cmd(BEGIN(LINES)); \ + cmd.cmd(VERTEX2F(GRID_X(i) *16, 0 *16)); \ + cmd.cmd(VERTEX2F(GRID_X(i) *16, FTDI::display_height *16)); \ + } \ + for(int i = 1; i < GRID_ROWS; i++) { \ + cmd.cmd(BEGIN(LINES)); \ + cmd.cmd(VERTEX2F(0 *16, GRID_Y(i) *16)); \ + cmd.cmd(VERTEX2F(FTDI::display_width *16, GRID_Y(i) *16)); \ + } \ + cmd.cmd(LINE_WIDTH(16)); \ + } + +namespace FTDI { + #ifdef TOUCH_UI_PORTRAIT + constexpr uint16_t display_width = Vsize; + constexpr uint16_t display_height = Hsize; + #else + constexpr uint16_t display_width = Hsize; + constexpr uint16_t display_height = Vsize; + #endif +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/polygon.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/polygon.h new file mode 100644 index 000000000..4560996da --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/polygon.h @@ -0,0 +1,96 @@ +/************* + * polygon.h * + *************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +/** + * The Polygon class helps drawing filled or stroked polygons on the FTDI EVE: + * + * CommandProcessor cmd; + * cmd.cmd(COLOR_RGB(0x00FF00)); + * + * Polygon p(cmd); + * p.begin_fill(); + * p.begin_loop(); + * p(10,10); + * p(20,10); + * p(20,20); + * p(10,20); + * p.end_loop(); + * p.begin_loop(); + * ... // Additional closed paths + * p.end_loop(); + * ... + * p.end_fill(); + * + * Based on the example from "Applicaton Note AN_334, FT801 Polygon Application": + * + * https://brtchip.com/wp-content/uploads/Support/Documentation/Application_Notes/ICs/EVE/AN_334-FT801_Polygon_Application.pdf + */ + +namespace FTDI { + class Polygon { + private: + FTDI::begin_t path_initiator = FTDI::LINE_STRIP; + + public: + CommandProcessor &cmd; + + Polygon(CommandProcessor &c) : cmd(c) {} + + void begin_fill() { + using namespace FTDI; + cmd.cmd(SAVE_CONTEXT()); + cmd.cmd(TAG_MASK(0)); + cmd.cmd(CLEAR(0,1,0)); + cmd.cmd(COLOR_MASK(0,0,0,0)); + cmd.cmd(STENCIL_OP(STENCIL_OP_KEEP, STENCIL_OP_INVERT)); + cmd.cmd(STENCIL_FUNC(STENCIL_FUNC_ALWAYS, 255, 255)); + // Drawing the edge strip along scan lines + // seems to yield the best performance + #ifdef TOUCH_UI_PORTRAIT + path_initiator = EDGE_STRIP_B; + #else + path_initiator = EDGE_STRIP_R; + #endif + } + + // Specify a clipping rectangle to paint fewer pixels and reduce rendering time, otherwise all pixels will be painted. + void end_fill(const int16_t x1 = 0, const int16_t y1 = 0, const int16_t x2 = display_width * 16, const int16_t y2 = display_height * 16) { + using namespace FTDI; + cmd.cmd(RESTORE_CONTEXT()); + + cmd.cmd(SAVE_CONTEXT()); + cmd.cmd(STENCIL_FUNC(STENCIL_FUNC_NOTEQUAL, 0, 255)); + cmd.cmd(BEGIN(RECTS)); + cmd.cmd(VERTEX2F(x1, y1)); + cmd.cmd(VERTEX2F(x2, y2)); + cmd.cmd(RESTORE_CONTEXT()); + } + + void begin_stroke() {path_initiator = FTDI::LINE_STRIP;} + void begin_loop() {cmd.cmd(FTDI::BEGIN(path_initiator));} + void end_stroke() {} + void end_loop() {} + + void operator()(const uint16_t x, const uint16_t y) {cmd.cmd(FTDI::VERTEX2F(x, y));} + }; +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/rgb_t.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/rgb_t.h new file mode 100644 index 000000000..07ee957f4 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/rgb_t.h @@ -0,0 +1,44 @@ +/*********** + * rgb_t.h * + ***********/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +struct rgb_t { + union { + struct { + uint8_t b,g,r,a; + }; + uint32_t packed; + }; + + rgb_t() : packed(0) {} + rgb_t(uint32_t rgb) : packed(rgb) {} + rgb_t(uint8_t r, uint8_t g, uint8_t b) : b(b), g(g), r(r), a(0) {} + operator uint32_t() const {return packed;}; + + static void lerp(float t, const rgb_t a, const rgb_t b, rgb_t &c) { + c.r = a.r + t * (b.r - a.r); + c.g = a.g + t * (b.g - a.g); + c.b = a.b + t * (b.b - a.b); + } + + uint8_t luminance() const {return 0.299*r + 0.587*g + 0.114*b;} +}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.cpp new file mode 100644 index 000000000..7dba952a0 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.cpp @@ -0,0 +1,106 @@ +/****************** + * screen_types.h * + ******************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "ftdi_extended.h" + +#ifdef FTDI_EXTENDED + +/********************** VIRTUAL DISPATCH DATA TYPE ******************************/ + +uint8_t ScreenRef::lookupScreen(onRedraw_func_t onRedraw_ptr) { + for(uint8_t type = 0; type < functionTableSize; type++) { + if (GET_METHOD(type, onRedraw) == onRedraw_ptr) { + return type; + } + } + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Screen not found: ", (uintptr_t) onRedraw_ptr); + #endif + return 0xFF; +} + +void ScreenRef::setScreen(onRedraw_func_t onRedraw_ptr) { + uint8_t type = lookupScreen(onRedraw_ptr); + if (type != 0xFF) { + setType(type); + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("New screen: ", type); + #endif + } +} + +void ScreenRef::initializeAll() { + for(uint8_t type = 0; type < functionTableSize; type++) { + GET_METHOD(type, onStartup)(); + } +} + +/********************** SCREEN STACK ******************************/ + +void ScreenStack::start() { + initializeAll(); + onEntry(); +} + +void ScreenStack::push(onRedraw_func_t onRedraw_ptr) { + stack[3] = stack[2]; + stack[2] = stack[1]; + stack[1] = stack[0]; + stack[0] = lookupScreen(onRedraw_ptr); +} + +void ScreenStack::push() { + stack[3] = stack[2]; + stack[2] = stack[1]; + stack[1] = stack[0]; + stack[0] = getType(); +} + +void ScreenStack::pop() { + setType(stack[0]); + forget(); +} + +void ScreenStack::forget() { + stack[0] = stack[1]; + stack[1] = stack[2]; + stack[2] = stack[3]; + stack[3] = 0; +} + +void ScreenStack::goTo(onRedraw_func_t s) { + push(); + onExit(); + setScreen(s); + onEntry(); +} + +void ScreenStack::goBack() { + onExit(); + pop(); + onEntry(); +} + +ScreenStack current_screen; + +#endif // FTDI_EXTENDED diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.h new file mode 100644 index 000000000..555031494 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.h @@ -0,0 +1,215 @@ +/******************** + * screen_types.cpp * + ********************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +typedef enum { + BACKGROUND = 1, + FOREGROUND = 2, + BOTH = 3 +} draw_mode_t; + + /********************** VIRTUAL DISPATCH DATA TYPE ******************************/ + +// True virtual classes are extremely expensive on the Arduino +// as the compiler stores the virtual function tables in RAM. +// We invent a data type called ScreenRef that gives us +// polymorphism by mapping an ID to virtual methods on various +// classes. This works by keeping a table in PROGMEM of pointers +// to static methods. + +#define DECL_SCREEN(className) { \ + className::onStartup, \ + className::onEntry, \ + className::onExit, \ + className::onIdle, \ + className::onRefresh, \ + className::onRedraw, \ + className::onTouchStart, \ + className::onTouchHeld, \ + className::onTouchEnd \ +} + +#define GET_METHOD(type, method) reinterpret_cast(pgm_read_ptr_far(&functionTable[type].method##_ptr)) +#define SCREEN_TABLE PROGMEM const ScreenRef::table_t ScreenRef::functionTable[] = +#define SCREEN_TABLE_POST const uint8_t ScreenRef::functionTableSize = sizeof(ScreenRef::functionTable)/sizeof(ScreenRef::functionTable[0]); + +class ScreenRef { + protected: + typedef void onStartup_func_t(void); + typedef void onEntry_func_t(void); + typedef void onExit_func_t(void); + typedef void onIdle_func_t(void); + typedef void onRefresh_func_t(void); + typedef void onRedraw_func_t(draw_mode_t); + typedef bool onTouchStart_func_t(uint8_t); + typedef bool onTouchHeld_func_t(uint8_t); + typedef bool onTouchEnd_func_t(uint8_t); + + private: + typedef struct { + onStartup_func_t *onStartup_ptr; + onEntry_func_t *onEntry_ptr; + onExit_func_t *onExit_ptr; + onIdle_func_t *onIdle_ptr; + onRefresh_func_t *onRefresh_ptr; + onRedraw_func_t *onRedraw_ptr; + onTouchStart_func_t *onTouchStart_ptr; + onTouchHeld_func_t *onTouchHeld_ptr; + onTouchEnd_func_t *onTouchEnd_ptr; + } table_t; + + uint8_t type = 0; + static PROGMEM const table_t functionTable[]; + static const uint8_t functionTableSize; + + public: + uint8_t getType() {return type;} + + void setType(uint8_t t) { + type = t; + } + + uint8_t lookupScreen(onRedraw_func_t onRedraw_ptr); + + void setScreen(onRedraw_func_t onRedraw_ptr); + + void onStartup() {GET_METHOD(type, onStartup)();} + void onEntry() {GET_METHOD(type, onEntry)();} + void onExit() {GET_METHOD(type, onExit)();} + void onIdle() {GET_METHOD(type, onIdle)();} + void onRefresh() {GET_METHOD(type, onRefresh)();} + void onRedraw(draw_mode_t dm) {GET_METHOD(type, onRedraw)(dm);} + bool onTouchStart(uint8_t tag) {return GET_METHOD(type, onTouchStart)(tag);} + bool onTouchHeld(uint8_t tag) {return GET_METHOD(type, onTouchHeld)(tag);} + bool onTouchEnd(uint8_t tag) {return GET_METHOD(type, onTouchEnd)(tag);} + + void initializeAll(); +}; + +/********************** SCREEN STACK ******************************/ + +// To conserve dynamic memory, the screen stack is hard-coded to +// have four values, allowing a menu of up to four levels. + +class ScreenStack : public ScreenRef { + private: + uint8_t stack[4]; + + public: + void start(); + void push(onRedraw_func_t); + void push(); + void pop(); + void forget(); + void goTo(onRedraw_func_t); + void goBack(); + + uint8_t peek() {return stack[0];} + uint8_t getScreen() {return getType();} +}; + +extern ScreenStack current_screen; + +/********************** BASE SCREEN CLASS ******************************/ + +/* UIScreen is the base class for all user interface screens. + */ +class UIScreen { + public: + static void onStartup() {} + static void onEntry() {current_screen.onRefresh();} + static void onExit() {} + static void onIdle() {} + static bool onTouchStart(uint8_t) {return true;} + static bool onTouchHeld(uint8_t) {return false;} + static bool onTouchEnd(uint8_t) {return true;} +}; + +#define PUSH_SCREEN(screen) current_screen.push(screen::onRedraw); +#define GOTO_SCREEN(screen) current_screen.goTo(screen::onRedraw); +#define GOTO_PREVIOUS() current_screen.goBack(); +#define AT_SCREEN(screen) (current_screen.getType() == current_screen.lookupScreen(screen::onRedraw)) +#define IS_PARENT_SCREEN(screen) (current_screen.peek() == current_screen.lookupScreen(screen::onRedraw)) + +/************************** CACHED VS UNCHACHED SCREENS ***************************/ + +class UncachedScreen { + public: + static void onRefresh() { + using namespace FTDI; + CLCD::CommandFifo cmd; + cmd.cmd(CMD_DLSTART); + + current_screen.onRedraw(BOTH); + + cmd.cmd(DL::DL_DISPLAY); + cmd.cmd(CMD_SWAP); + cmd.execute(); + } +}; + +template +class CachedScreen { + protected: + static bool storeBackground(){ + DLCache dlcache(DL_SLOT); + if (!dlcache.store(DL_SIZE)) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("CachedScreen::storeBackground() failed: not enough DL cache space"); + return false; + } + return true; + } + + static void repaintBackground(){ + using namespace FTDI; + DLCache dlcache(DL_SLOT); + CLCD::CommandFifo cmd; + + cmd.cmd(CMD_DLSTART); + current_screen.onRedraw(BACKGROUND); + + dlcache.store(DL_SIZE); + } + + public: + static void onRefresh(){ + using namespace FTDI; + DLCache dlcache(DL_SLOT); + CLCD::CommandFifo cmd; + + cmd.cmd(CMD_DLSTART); + + if (dlcache.has_data()) { + dlcache.append(); + } else { + current_screen.onRedraw(BACKGROUND); + dlcache.store(DL_SIZE); + } + + current_screen.onRedraw(FOREGROUND); + + cmd.cmd(DL::DL_DISPLAY); + cmd.cmd(CMD_SWAP); + cmd.execute(); + } +}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_list.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_list.h new file mode 100644 index 000000000..a53ed9515 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_list.h @@ -0,0 +1,38 @@ +/**************** + * sound_list.h * + ****************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +class SoundList { + private: + static PROGMEM const struct list_t { + const char *const PROGMEM name; + const FTDI::SoundPlayer::sound_t* data; + } list[]; + public: + static const uint8_t n; + static inline const char* name(uint8_t val) { + return (const char* ) pgm_read_ptr_near(&list[val].name); + } + static inline FTDI::SoundPlayer::sound_t* data(uint8_t val) { + return (FTDI::SoundPlayer::sound_t*) pgm_read_ptr_near(&list[val].data); + } +}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.cpp new file mode 100644 index 000000000..e8c5e881c --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.cpp @@ -0,0 +1,111 @@ +/******************** + * sound_player.cpp * + ********************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "ftdi_extended.h" + +#ifdef FTDI_EXTENDED + +namespace FTDI { + SoundPlayer sound; // Global sound player object + + void SoundPlayer::set_volume(uint8_t vol) { + CLCD::mem_write_8(REG::VOL_SOUND, vol); + } + + uint8_t SoundPlayer::get_volume() { + return CLCD::mem_read_8(REG::VOL_SOUND); + } + + void SoundPlayer::play(effect_t effect, note_t note) { + + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Playing note ", note); + SERIAL_ECHOLNPAIR(", instrument ", effect); + #endif + + // Play the note + CLCD::mem_write_16(REG::SOUND, (note == REST) ? 0 : (((note ? note : NOTE_C4) << 8) | effect)); + CLCD::mem_write_8(REG::PLAY, 1); + } + + note_t SoundPlayer::frequency_to_midi_note(const uint16_t frequency_hz) { + const float f0 = 440; + return note_t(NOTE_A4 + (log(frequency_hz)-log(f0))*12/log(2) + 0.5); + } + + // Plays a tone of a given frequency and duration. Since the FTDI FT810 only + // supports MIDI notes, we round down to the nearest note. + + void SoundPlayer::play_tone(const uint16_t frequency_hz, const uint16_t duration_ms) { + play(ORGAN, frequency_to_midi_note(frequency_hz)); + + // Schedule silence to squelch the note after the duration expires. + sequence = silence; + wait = duration_ms; + timer.start(); + } + + void SoundPlayer::play(const sound_t* seq, play_mode_t mode) { + sequence = seq; + wait = 250; // Adding this delay causes the note to not be clipped, not sure why. + timer.start(); + + if (mode == PLAY_ASYNCHRONOUS) return; + + // If playing synchronously, then play all the notes here + + while (has_more_notes()) { + onIdle(); + #ifdef EXTENSIBLE_UI + ExtUI::yield(); + #endif + } + } + + bool SoundPlayer::is_sound_playing() { + return CLCD::mem_read_8( REG::PLAY ) & 0x1; + } + + void SoundPlayer::onIdle() { + if (!sequence) return; + + const bool ready_for_next_note = (wait == 0) ? !is_sound_playing() : timer.elapsed(wait); + + if (ready_for_next_note) { + const effect_t fx = effect_t(pgm_read_byte(&sequence->effect)); + const note_t nt = note_t(pgm_read_byte(&sequence->note)); + const uint32_t ms = uint32_t(pgm_read_byte(&sequence->sixteenths)) * 1000 / 16; + + if (ms == 0 && fx == SILENCE && nt == END_SONG) { + sequence = 0; + play(SILENCE, REST); + } else { + wait = ms; + timer.start(); + play(fx, nt); + sequence++; + } + } + } +} // namespace FTDI + +#endif // FTDI_EXTENDED diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.h new file mode 100644 index 000000000..e177ec57d --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.h @@ -0,0 +1,70 @@ +/****************** + * sound_player.h * + ******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +namespace FTDI { + typedef enum { + PLAY_ASYNCHRONOUS, + PLAY_SYNCHRONOUS + } play_mode_t; + + class SoundPlayer { + typedef FTDI::ftdi_registers REG; + typedef FTDI::ftdi_memory_map MAP; + + public: + struct sound_t { + effect_t effect; // The sound effect number + note_t note; // The MIDI note value + uint16_t sixteenths; // Duration of note, in sixteeths of a second, or zero to play to completion + }; + + const uint8_t WAIT = 0; + + private: + const sound_t *sequence; + tiny_timer_t timer; + tiny_time_t wait; + + note_t frequency_to_midi_note(const uint16_t frequency); + + public: + static void set_volume(uint8_t volume); + static uint8_t get_volume(); + + static void play(effect_t effect, note_t note = NOTE_C4); + static bool is_sound_playing(); + + void play(const sound_t* seq, play_mode_t mode = PLAY_SYNCHRONOUS); + void play_tone(const uint16_t frequency_hz, const uint16_t duration_ms); + bool has_more_notes() {return sequence != 0;}; + + void onIdle(); + }; + + extern SoundPlayer sound; + + const PROGMEM SoundPlayer::sound_t silence[] = { + {SILENCE, END_SONG, 0} + }; +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.cpp new file mode 100644 index 000000000..69b3b7d7a --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.cpp @@ -0,0 +1,129 @@ +/**************** + * text_box.cpp * + ****************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "ftdi_extended.h" + +#ifdef FTDI_EXTENDED + +namespace FTDI { + /** + * Given a str, end will be set to the position at which a line needs to + * be broken so that the display width is less than w. The line will also + * be broken after a '\n'. Returns the display width of the line. + */ + static uint16_t find_line_break(const CLCD::FontMetrics &fm, uint16_t w, const char *str, const char *&end) { + const char *p = str; + end = str + strlen(str); + uint16_t width = fm.get_text_width(str); + for(;;) { + // Find next tentative line break. + char delim = *(p); + while (delim && delim != ' ' && delim != '\n') { + delim = *(++p); + } + // Check to see whether to break the line. + const uint16_t margin = fm.get_text_width(" "); + const uint16_t lw = p > str ? fm.get_text_width(str, p - str) + margin : 0; + if (lw < w) { + width = lw; + switch (delim) { + case '\0': + end = p; + break; + case '\n': + end = ++p; + break; + case ' ': + end = ++p; + continue; + } + } + return width; + } + } + + /** + * This function returns a measurements of the word-wrapped text box. + */ + static void measure_text_box(const CLCD::FontMetrics &fm, const char *str, uint16_t &width, uint16_t &height) { + const char *line_start = (const char*)str; + const char *line_end; + const uint16_t wrap_width = width; + width = height = 0; + for(;;) { + uint16_t line_width = find_line_break(fm, wrap_width, line_start, line_end); + if (line_end == line_start) break; + width = max(width, line_width); + height += fm.height; + line_start = line_end; + } + } + + /** + * This function draws text inside a bounding box, doing word wrapping and using the largest font that will fit. + */ + void draw_text_box(CommandProcessor& cmd, int x, int y, int w, int h, const char *str, uint16_t options, uint8_t font) { + CLCD::FontMetrics fm(font); + + uint16_t box_width, box_height; + + for(;;) { + box_width = w; + measure_text_box(fm, str, box_width, box_height); + if (box_width <= (uint16_t)w && box_height <= (uint16_t)h) break; + fm.load(--font); + if (font == 26) break; + } + + const uint16_t dx = (options & OPT_RIGHTX) ? w : (options & OPT_CENTERX) ? w/2 : 0; + const uint16_t dy = (options & OPT_CENTERY) ? (h - box_height)/2 : 0; + + const char *line_start = str; + const char *line_end; + for(;;) { + find_line_break(fm, w, line_start, line_end); + if (line_end == line_start) break; + + const size_t line_len = line_end - line_start; + if (line_len) { + char line[line_len + 1]; + strncpy(line, line_start, line_len); + line[line_len] = 0; + if (line[line_len - 1] == '\n' || line[line_len - 1] == ' ') + line[line_len - 1] = 0; + + cmd.CLCD::CommandFifo::text(x + dx, y + dy, font, options & ~OPT_CENTERY); + cmd.CLCD::CommandFifo::str(line); + } + y += fm.height; + + line_start = line_end; + } + } + + void draw_text_box(CommandProcessor& cmd, int x, int y, int w, int h, progmem_str pstr, uint16_t options, uint8_t font) { + char str[strlen_P((const char*)pstr) + 1]; + strcpy_P(str, (const char*)pstr); + draw_text_box(cmd, x, y, w, h, (const char*) str, options, font); + } +} // namespace FTDI + +#endif // FTDI_EXTENDED diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.h new file mode 100644 index 000000000..a0f99c6b0 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.h @@ -0,0 +1,30 @@ +/************** + * text_box.h * + **************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +/** + * This function draws text inside a bounding box, doing word wrapping and using the largest font that will fit. + */ +namespace FTDI { + void draw_text_box(class CommandProcessor& cmd, int x, int y, int w, int h, progmem_str str, uint16_t options = 0, uint8_t font = 31); + void draw_text_box(class CommandProcessor& cmd, int x, int y, int w, int h, const char *str, uint16_t options = 0, uint8_t font = 31); +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.cpp new file mode 100644 index 000000000..c7b35e92d --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.cpp @@ -0,0 +1,51 @@ +/****************** + * tiny_timer.cpp * + ******************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "ftdi_extended.h" + +#ifdef FTDI_EXTENDED + +bool tiny_timer_t::elapsed(tiny_time_t duration) { + uint8_t now = tiny_time_t::tiny_time( + #ifdef __MARLIN_FIRMWARE__ + ExtUI::safe_millis() + #else + millis() + #endif + ); + uint8_t elapsed = now - _start; + if (elapsed >= duration._duration) { + return true; + } else { + return false; + } +} + +void tiny_timer_t::start() { + _start = tiny_time_t::tiny_time( + #ifdef __MARLIN_FIRMWARE__ + ExtUI::safe_millis() + #else + millis() + #endif + ); +} +#endif // FTDI_EXTENDED diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.h new file mode 100644 index 000000000..9db912752 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.h @@ -0,0 +1,56 @@ +/**************** + * tiny_timer.h * + ****************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +/* Helpful Reference: + * + * https://arduino.stackexchange.com/questions/12587/how-can-i-handle-the-millis-rollover + */ + +/* tiny_interval_t downsamples a 32-bit millis() value + into a 8-bit value which can record periods of + a few seconds with a rougly 1/16th of second + resolution. This allows us to measure small + intervals without needing to use four-byte counters. + */ +class tiny_time_t { + private: + friend class tiny_timer_t; + uint8_t _duration; + + static uint8_t tiny_time(uint32_t ms) {return ceil(float(ms) / 64);}; + + public: + tiny_time_t() : _duration(0) {} + tiny_time_t(uint32_t ms) : _duration(tiny_time(ms)) {} + tiny_time_t & operator= (uint32_t ms) {_duration = tiny_time(ms); return *this;} + bool operator == (uint32_t ms) {return _duration == tiny_time(ms);} +}; + +class tiny_timer_t { + private: + uint8_t _start; + + public: + void start(); + bool elapsed(tiny_time_t interval); +}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/circular_progress.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/circular_progress.h new file mode 100644 index 000000000..412da5b36 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/circular_progress.h @@ -0,0 +1,100 @@ +/*********************** + * circular_progress.h * + ***********************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +/* This function draws a circular progress "ring" */ + +void draw_circular_progress(CommandProcessor& cmd, int x, int y, int w, int h, uint8_t percent, uint32_t bgcolor, uint32_t fgcolor, float rim = 0.3) { + using namespace FTDI; + + const float a = float(percent)/100.0*2.0*PI; + const float a1 = min(PI/2, a); + const float a2 = min(PI/2, a-a1); + const float a3 = min(PI/2, a-a1-a2); + const float a4 = min(PI/2, a-a1-a2-a3); + + const int ro = min(w,h) * 8; + const int rr = ro * rim; + const int cx = x * 16 + w * 8; + const int cy = y * 16 + h * 8; + + // Load a rim shape into stencil buffer + cmd.cmd(SAVE_CONTEXT()); + cmd.cmd(TAG_MASK(0)); + cmd.cmd(CLEAR(0,1,0)); + cmd.cmd(COLOR_MASK(0,0,0,0)); + cmd.cmd(STENCIL_OP(STENCIL_OP_KEEP, STENCIL_OP_INVERT)); + cmd.cmd(STENCIL_FUNC(STENCIL_FUNC_ALWAYS, 255, 255)); + cmd.cmd(BEGIN(POINTS)); + cmd.cmd(POINT_SIZE(ro)); + cmd.cmd(VERTEX2F(cx, cy)); + cmd.cmd(POINT_SIZE(ro - rr)); + cmd.cmd(VERTEX2F(cx, cy)); + cmd.cmd(RESTORE_CONTEXT()); + + // Mask further drawing by stencil buffer + cmd.cmd(SAVE_CONTEXT()); + cmd.cmd(STENCIL_FUNC(STENCIL_FUNC_NOTEQUAL, 0, 255)); + + // Fill the background + cmd.cmd(COLOR_RGB(bgcolor)); + cmd.cmd(BEGIN(POINTS)); + cmd.cmd(POINT_SIZE(ro)); + cmd.cmd(VERTEX2F(cx, cy)); + cmd.cmd(COLOR_RGB(fgcolor)); + + // Paint upper-right quadrant + cmd.cmd(BEGIN(EDGE_STRIP_A)); + cmd.cmd(VERTEX2F(cx, cy)); + cmd.cmd(VERTEX2F(cx + ro*sin(a1) + 16,cy - ro*cos(a1) + 8)); + + // Paint lower-right quadrant + if (a > PI/2) { + cmd.cmd(BEGIN(EDGE_STRIP_R)); + cmd.cmd(VERTEX2F(cx, cy)); + cmd.cmd(VERTEX2F(cx + ro*cos(a2),cy + ro*sin(a2) + 16)); + } + + // Paint lower-left quadrant + if (a > PI) { + cmd.cmd(BEGIN(EDGE_STRIP_B)); + cmd.cmd(VERTEX2F(cx, cy)); + cmd.cmd(VERTEX2F(cx - ro*sin(a3) - 8,cy + ro*cos(a3))); + } + + // Paint upper-left quadrant + if (a > 1.5*PI) { + cmd.cmd(BEGIN(EDGE_STRIP_L)); + cmd.cmd(VERTEX2F(cx, cy)); + cmd.cmd(VERTEX2F(cx - ro*cos(a4),cy - ro*sin(a4))); + } + cmd.cmd(RESTORE_CONTEXT()); + + // Draw the text + char str[5]; + sprintf(str,"%d\%%",percent); + + cmd.cmd(SAVE_CONTEXT()); + cmd.cmd(COLOR_RGB(fgcolor)); + cmd.text(x,y,w,h,str, OPT_CENTERX | OPT_CENTERY); + cmd.cmd(RESTORE_CONTEXT()); +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/poly_ui.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/poly_ui.h new file mode 100644 index 000000000..52146510c --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/poly_ui.h @@ -0,0 +1,395 @@ +/************* + * poly_ui.h * + *************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +/** + * The PolyReader class iterates over an array of (x,y) pairs. + * For supporting polygons with holes an end-of-loop marker may + * be embedded into the data stream: + * + * const PROGMEM uint16_t data[] = { + * x, y, x, y, ..., eol, + * ... + * x, y, x, y, ..., eol + * } + * + * The PolyReader object can be used to iterate over the points. + * + * PolyReader r(data, N_ELEMENTS(data)); + * + * for(r.start();r.has_more(); r.next()) { + * uint16_t x = r.x; + * uint16_t y = r.y; + * + * // Do something with the point + * ... + * + * // Do something else if this point + * // closes a loop. + * if (r.end_of_loop()) { + * ... + * } + * } + * + */ + +class PolyReader { + private: + typedef uint16_t type_t; + + static constexpr type_t eol = 0xFFFF; + + const type_t *p, *top, *end; + type_t start_x, start_y; + + void close_loop() { + x = start_x; + y = start_y; + start_x = eol; + start_y = eol; + } + + public: + type_t x, y; + + // Begin reading a polygon data structure + PolyReader(const uint16_t data[], const size_t n_elements) : top(data), end(data + n_elements) { + start(); + } + + void start() { + p = top; + start_x = eol; + next(); + } + + // Reads the next point in the polygon data structure + void next() { + if (!p) return; + + if (p == end) { + if (start_x != eol) + close_loop(); + else + p = NULL; + } else { + x = pgm_read_word_far(p++); + if (x == eol) + close_loop(); + else { + y = pgm_read_word_far(p++); + if (start_x == eol) { + start_x = x; + start_y = y; + } + } + } + } + + bool has_more() {return p != NULL;} + bool end_of_loop() {return start_x == eol;} +}; + +/** + * The TransformedPolyReader class works like the PolyReader, + * but the (x,y) input is assumed to be normalized onto a + * unit square and then mapped to the full 16-bits, i.e. + * (0.0,1.0) => (0x0000,0xFFFE). This class will scale the + * data to fit the entire display, a bounding box, or apply + * some arbitrary affine transform. + * + * This class is suitable for reading data from "svg2cpp.py" + */ +class TransformedPolyReader : public PolyReader { + private: + /** + * Fixed point type for fast transformations, supports + * values from 0 to 1024, with 1/32 precision. + */ + static constexpr uint8_t fract_bits = 5; + typedef int16_t fix_t; + fix_t makefix(float f) {return f * (1 << fract_bits);} + + // First two rows of 3x3 transformation matrix + fix_t a, b, c; + fix_t d, e, f; + + void transform() { + /** + * Values from PolyReader vary from 0 to FFFE. + * As an approximation to dividing by FFFE, + * we perform a bit shift right by 16. + */ + const int32_t px = PolyReader::x; + const int32_t py = PolyReader::y; + const int32_t round = 1 << (fract_bits-1); + x = (((((a * px) + (b * py)) >> 16) + c) + round) >> fract_bits; + y = (((((d * px) + (e * py)) >> 16) + f) + round) >> fract_bits; + } + + void set_transform( + fix_t A, fix_t B, fix_t C, + fix_t D, fix_t E, fix_t F + ) { + a = A; b = B; c = C; + d = D; e = E; f = F; + } + + public: + typedef int16_t type_t; + + type_t x, y; + + TransformedPolyReader(const uint16_t data[], const size_t n) : PolyReader(data, n) { + scale_to_fit(); + transform(); + } + + // Set an arbitrary affine transform + void set_transform( + float A, float B, float C, + float D, float E, float F + ) { + set_transform( + makefix(A), makefix(B), makefix(C), + makefix(D), makefix(E), makefix(F) + ); + } + + // Scale the data to fit a specified bounding box + void scale_to_fit(type_t x_min, type_t y_min, type_t x_max, type_t y_max) { + fix_t sx = makefix(x_max - x_min); + fix_t sy = makefix(y_max - y_min); + fix_t tx = makefix(x_min); + fix_t ty = makefix(y_min); + set_transform( + sx, 0, tx, + 0, sy, ty + ); + } + + // Scale to fit the entire display (default) + void scale_to_fit() { + scale_to_fit(0, 0, FTDI::display_width, FTDI::display_height); + } + + void next() { + PolyReader::next(); + transform(); + } +}; + +/** + * The DeduplicatedPolyReader wraps around another PolyReader + * class to remove repeated points from the data. This could + * happen when scaling down using TransformedPolyReader, for + * example. + */ +template +class DeduplicatedPolyReader : public POLY_READER { + private: + typename POLY_READER::type_t last_x, last_y; + + static constexpr typename POLY_READER::type_t eol = 0xFFFF; + + public: + DeduplicatedPolyReader(const uint16_t data[], const size_t n) : POLY_READER(data, n) { + last_x = POLY_READER::x; + last_y = POLY_READER::y; + } + + void next() { + do { + if (!POLY_READER::has_more()) return; + POLY_READER::next(); + } while (POLY_READER::x == last_x && POLY_READER::y == last_y && !POLY_READER::end_of_loop()); + if (POLY_READER::end_of_loop()) { + last_x = last_y = eol; + } else { + last_x = POLY_READER::x; + last_y = POLY_READER::y; + } + } +}; + +/** + * The helper class allows you to build an interface based on arbitrary + * shapes. + */ +template> +class GenericPolyUI { + private: + CommandProcessor &cmd; + + // Attributes used to paint buttons + + uint32_t btn_fill_color = 0x000000; + uint32_t btn_shadow_color = 0xF3E0E0; + uint8_t btn_shadow_depth = 5; + uint32_t btn_stroke_color = 0x000000; + uint8_t btn_stroke_width = 28; + + draw_mode_t mode; + + public: + typedef POLY_READER poly_reader_t; + + GenericPolyUI(CommandProcessor &c, draw_mode_t what = BOTH) : cmd(c), mode(what) {} + + // Fills a polygon with the current COLOR_RGB + void fill(poly_reader_t r, bool clip = true) { + using namespace FTDI; + int16_t x, y, w, h; + + if (clip) { + // Clipping reduces the number of pixels that are + // filled, allowing more complex shapes to be drawn + // in the alloted time. + bounds(r, x, y, w, h); + cmd.cmd(SAVE_CONTEXT()); + cmd.cmd(SCISSOR_XY(x, y)); + cmd.cmd(SCISSOR_SIZE(w, h)); + } + + Polygon p(cmd); + p.begin_fill(); + p.begin_loop(); + for(r.start();r.has_more();r.next()) { + p(r.x * 16, r.y * 16); + if (r.end_of_loop()) { + p.end_loop(); + p.begin_loop(); + } + } + p.end_loop(); + p.end_fill(); + if (clip) + cmd.cmd(RESTORE_CONTEXT()); + } + + void shadow(poly_reader_t r, uint8_t offset) { + #if FTDI_API_LEVEL >= 810 + using namespace FTDI; + cmd.cmd(VERTEX_TRANSLATE_X(offset * 16)); + cmd.cmd(VERTEX_TRANSLATE_Y(offset * 16)); + fill(r, false); + cmd.cmd(VERTEX_TRANSLATE_X(0)); + cmd.cmd(VERTEX_TRANSLATE_Y(0)); + #endif + } + + // Strokes a polygon with the current COLOR_RGB + void stroke(poly_reader_t r) { + using namespace FTDI; + Polygon p(cmd); + p.begin_stroke(); + p.begin_loop(); + for(r.start();r.has_more(); r.next()) { + p(r.x * 16, r.y * 16); + if (r.end_of_loop()) { + p.end_loop(); + p.begin_loop(); + } + } + p.end_loop(); + p.end_stroke(); + } + + // Compute the bounds of a polygon + void bounds(poly_reader_t r, int16_t &x, int16_t &y, int16_t &w, int16_t &h) { + int16_t x_min = INT16_MAX; + int16_t y_min = INT16_MAX; + int16_t x_max = INT16_MIN; + int16_t y_max = INT16_MIN; + for(r.start(); r.has_more(); r.next()) { + x_min = min(x_min, r.x); + x_max = max(x_max, r.x); + y_min = min(y_min, r.y); + y_max = max(y_max, r.y); + } + x = x_min; + y = y_min; + w = x_max - x_min; + h = y_max - y_min; + } + + /** + * Draw shaped buttons. Buttons are drawn out of a polygon which is + * filled and stroked on top of a drop shadow. The button will + * become "pushed" when touched. + */ + + void button_fill(const uint32_t color) { + btn_fill_color = color; + } + + void button_stroke(const uint32_t color, const uint8_t width) { + btn_stroke_color = color; + btn_stroke_width = width; + } + + void button_shadow(const uint32_t color, const uint8_t depth) { + btn_shadow_color = color; + btn_shadow_depth = depth; + } + + void button(const uint8_t tag, poly_reader_t r) { + using namespace FTDI; + // Draw the shadow + #if FTDI_API_LEVEL >= 810 + if (mode & BACKGROUND) { + cmd.cmd(SAVE_CONTEXT()); + cmd.cmd(TAG(tag)); + cmd.cmd(VERTEX_TRANSLATE_X(btn_shadow_depth * 16)); + cmd.cmd(VERTEX_TRANSLATE_Y(btn_shadow_depth * 16)); + cmd.cmd(COLOR_RGB(btn_shadow_color)); + fill(r, false); + cmd.cmd(RESTORE_CONTEXT()); + } + #endif + + if (mode & FOREGROUND) { + cmd.cmd(SAVE_CONTEXT()); + #if FTDI_API_LEVEL >= 810 + if (EventLoop::get_pressed_tag() == tag) { + // "Push" the button + cmd.cmd(VERTEX_TRANSLATE_X(btn_shadow_depth * 16)); + cmd.cmd(VERTEX_TRANSLATE_Y(btn_shadow_depth * 16)); + } + #endif + // Draw the fill and stroke + cmd.cmd(TAG(tag)); + cmd.cmd(COLOR_RGB(btn_fill_color)); + fill(r, false); + cmd.cmd(COLOR_RGB(btn_stroke_color)); + cmd.cmd(LINE_WIDTH(btn_stroke_width)); + stroke(r); + cmd.cmd(RESTORE_CONTEXT()); + } + } + + void color(const uint32_t color) { + cmd.cmd(FTDI::COLOR_RGB(color)); + } +}; + +typedef GenericPolyUI<> PolyUI; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/svg2cpp.py b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/svg2cpp.py new file mode 100755 index 000000000..6a8d07491 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/svg2cpp.py @@ -0,0 +1,278 @@ +#!/usr/bin/python + +# Written By Marcio Teixeira 2018 - Aleph Objects, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# To view a copy of the GNU General Public License, go to the following +# location: . + +from __future__ import print_function +import argparse, re, sys + +usage = ''' +This program extracts line segments from a SVG file and writes +them as coordinates in a C array. The x and y values will be +scaled from 0x0000 to 0xFFFE. 0xFFFF is used as path separator. + +This program can only interpret straight segments, not curves. +It also cannot handle SVG transform attributes. To convert an +SVG file into the proper format, use the following procedure: + + - Load SVG file into Inkscape + - Convert all Objects to Paths (Path -> Object to Path) + - Convert all Strokes to Paths (Path -> Stroke to Path) + - Combine all paths into one (Path -> Combine) [1] + - Convert all curves into short line segments + (Extensions -> Modify Paths -> Flatten Beziers...) + - Save as new SVG + - Convert into a header file using this utility + - To give paths individual names, break apart paths and + use the XML Editor to set the "id" attributes. + +[1] Combining paths is necessary to remove transforms. You +could also use inkscape-applytransforms Inkscape extension. + +''' + +header = ''' +/**************************************************************************** + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +/** + * This file was auto-generated using "svg2cpp.pl" + * + * The encoding consists of x,y pairs with the min and max scaled to + * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the + * start of a new closed path. + */ + +#pragma once +''' + +class ComputeBoundingBox: + def reset(self): + self.x_min = float(" inf") + self.y_min = float(" inf") + self.x_max = float("-inf") + self.y_max = float("-inf") + self.n_points = 0 + self.n_paths = 0 + + def command(self, type, x, y): + self.x_min = min(self.x_min, x) + self.x_max = max(self.x_max, x) + self.y_min = min(self.y_min, y) + self.y_max = max(self.y_max, y) + + if type == "M": + self.n_paths += 1 + self.n_points += 1 + + def scale(self, x, y): + x -= self.x_min + y -= self.y_min + x /= self.x_max - self.x_min + y /= self.y_max - self.y_min + #y = 1 - y # Flip upside down + return (x, y) + + def path_finished(self, id): + pass + + def write(self): + print("constexpr float x_min = %f;\n" % self.x_min) + print("constexpr float x_max = %f;\n" % self.x_max) + print("constexpr float y_min = %f;\n" % self.y_min) + print("constexpr float y_max = %f;\n" % self.y_max) + + def from_svg_view_box(self, svg): + s = re.search(']+>', svg); + if s: + m = re.search('viewBox="([0-9-.]+) ([0-9-.]+) ([0-9-.]+) ([0-9-.]+)"', svg) + if m: + self.x_min = float(m.group(1)) + self.y_min = float(m.group(2)) + self.x_max = float(m.group(3)) + self.y_max = float(m.group(4)) + return True + return False + +class WriteDataStructure: + def __init__(self, bounding_box): + self.bounds = bounding_box + + def reset(self, ): + self.hex_words = [] + + def push(self, value): + self.hex_words.append("0x%04X" % value) + + def command(self, type, x, y): + if type == "M": + self.push(0xFFFF) + x, y = self.bounds.scale(x,y) + self.push(x * 0xFFFE) + self.push(y * 0xFFFE) + + def path_finished(self, id): + if self.hex_words and self.hex_words[0] == "0xFFFF": + self.hex_words.pop(0) + print("const PROGMEM uint16_t", id + "[] = {" + ", ".join (self.hex_words) + "};\n") + self.hex_words = [] + +class Parser: + def __init__(self, op): + self.op = op + self.reset() + + def reset(self): + self.last_x = 0 + self.last_y = 0 + self.initial_x = 0 + self.initial_y = 0 + + def process_svg_path_L_or_M(self, cmd, x, y): + self.op.command(cmd, x, y) + self.last_x = x + self.last_y = y + if cmd == "M": + self.initial_x = x + self.initial_y = y + + def process_svg_path_data_cmd(self, id, cmd, a, b): + """Converts the various types of moves into L or M commands + and dispatches to process_svg_path_L_or_M for futher processing.""" + if cmd == "Z" or cmd == "z": + self.process_svg_path_L_or_M("L", self.initial_x, self.initial_y) + elif cmd == "H": + self.process_svg_path_L_or_M("L", a, self.last_y) + elif cmd == "V": + self.process_svg_path_L_or_M("L", self.last_x, a) + elif cmd == "h": + self.process_svg_path_L_or_M("L", self.last_x + a, self.last_y) + elif cmd == "v": + self.process_svg_path_L_or_M("L", self.last_x, self.last_y + a) + elif cmd == "L": + self.process_svg_path_L_or_M("L", a, b) + elif cmd == "l": + self.process_svg_path_L_or_M("L", self.last_x + a, self.last_y + b) + elif cmd == "M": + self.process_svg_path_L_or_M("M", a, b) + elif cmd == "m": + self.process_svg_path_L_or_M("M", self.last_x + a, self.last_y + b) + else: + print("Unsupported path data command:", cmd, "in path", id, "\n", file=sys.stderr) + quit() + + def eat_token(self, regex): + """Looks for a token at the start of self.d. + If found, the token is removed.""" + self.m = re.match(regex,self.d) + if self.m: + self.d = self.d[self.m.end():] + return self.m + + def process_svg_path_data(self, id, d): + """Breaks up the "d" attribute into individual commands + and calls "process_svg_path_data_cmd" for each""" + + self.d = d + while (self.d): + if self.eat_token('\s+'): + pass # Just eat the spaces + + elif self.eat_token('([LMHVZlmhvz])'): + cmd = self.m.group(1) + # The following commands take no arguments + if cmd == "Z" or cmd == "z": + self.process_svg_path_data_cmd(id, cmd, 0, 0) + + elif self.eat_token('([CScsQqTtAa])'): + print("Unsupported path data command:", self.m.group(1), "in path", id, "\n", file=sys.stderr) + quit() + + elif self.eat_token('([ ,]*[-0-9e.]+)+'): + # Process list of coordinates following command + coords = re.split('[ ,]+', self.m.group(0)) + # The following commands take two arguments + if cmd == "L" or cmd == "l": + while coords: + self.process_svg_path_data_cmd(id, cmd, float(coords.pop(0)), float(coords.pop(0))) + elif cmd == "M": + while coords: + self.process_svg_path_data_cmd(id, cmd, float(coords.pop(0)), float(coords.pop(0))) + # If a MOVETO has multiple points, the subsequent ones are assumed to be LINETO + cmd = "L" + elif cmd == "m": + while coords: + self.process_svg_path_data_cmd(id, cmd, float(coords.pop(0)), float(coords.pop(0))) + # If a MOVETO has multiple points, the subsequent ones are assumed to be LINETO + cmd = "l" + # Assume all other commands are single argument + else: + while coords: + self.process_svg_path_data_cmd(id, cmd, float(coords.pop(0)), 0) + else: + print("Syntax error:", d, "in path", id, "\n", file=sys.stderr) + quit() + + def process_svg_paths(self, svg): + self.op.reset() + for path in re.findall(']+>', svg): + id = "" + m = re.search(' id="(.*)"', path) + if m: + id = m.group(1) + + m = re.search(' transform="(.*)"', path) + if m: + print("Found transform in path", id, "! Cannot process file!", file=sys.stderr) + quit() + + m = re.search(' d="(.*)"', path) + if m: + self.process_svg_path_data(id, m.group(1)) + self.op.path_finished(id) + self.reset() + +if __name__ == "__main__": + parser = argparse.ArgumentParser() + parser.add_argument("filename") + args = parser.parse_args() + + f = open(args.filename, "r") + data = f.read() + + print(header) + + b = ComputeBoundingBox() + if not b.from_svg_view_box(data): + # Can't find the view box, so use the bounding box of the elements themselves. + p = Parser(b) + p.process_svg_paths(data) + b.write() + + w = WriteDataStructure(b) + p = Parser(w) + p.process_svg_paths(data) diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/ftdi_eve_lib.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/ftdi_eve_lib.h new file mode 100644 index 000000000..5a7d3c960 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/ftdi_eve_lib.h @@ -0,0 +1,27 @@ +/****************** + * ftdi_eve_lib.h * + ******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2019 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#include "compat.h" +#include "basic/ftdi_basic.h" +#include "extended/ftdi_extended.h" diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/marlin_events.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/marlin_events.cpp new file mode 100644 index 000000000..4318ae0a0 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/marlin_events.cpp @@ -0,0 +1,128 @@ +/********************* + * marlin_events.cpp * + *********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "compat.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens/screens.h" + +namespace ExtUI { + using namespace Theme; + using namespace FTDI; + + void onStartup() { + EventLoop::setup(); + } + + void onIdle() { + EventLoop::loop(); + } + + void onPrinterKilled(PGM_P lcd_msg) { + KillScreen::show(progmem_str(lcd_msg)); + } + + void onMediaInserted() { + if (AT_SCREEN(StatusScreen)) + StatusScreen::setStatusMessage(F(MSG_MEDIA_INSERTED)); + sound.play(media_inserted, PLAY_ASYNCHRONOUS); + } + + void onMediaRemoved() { + if (AT_SCREEN(StatusScreen)) + StatusScreen::setStatusMessage(F(MSG_MEDIA_REMOVED)); + sound.play(media_removed, PLAY_ASYNCHRONOUS); + if (AT_SCREEN(FilesScreen)) { + GOTO_SCREEN(StatusScreen) + } + } + + void onMediaError() { + sound.play(sad_trombone, PLAY_ASYNCHRONOUS); + AlertDialogBox::showError(F("Unable to read media.")); + } + + void onStatusChanged(const char* lcd_msg) { + StatusScreen::setStatusMessage(lcd_msg); + } + + void onStatusChanged(progmem_str lcd_msg) { + StatusScreen::setStatusMessage(lcd_msg); + } + + void onPrintTimerStarted() { + InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_STARTED); + } + + void onPrintTimerStopped() { + InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_FINISHED); + } + + void onPrintTimerPaused() { + } + + void onFilamentRunout(const extruder_t extruder) { + char lcd_msg[30]; + sprintf_P(lcd_msg, PSTR("Extruder %d Filament Error"), extruder + 1); + StatusScreen::setStatusMessage(lcd_msg); + InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_FAILED); + } + + void onFactoryReset() { + InterfaceSettingsScreen::defaultSettings(); + } + + void onStoreSettings(char *buff) { + InterfaceSettingsScreen::saveSettings(buff); + } + + void onLoadSettings(const char *buff) { + InterfaceSettingsScreen::loadSettings(buff); + } + + void onConfigurationStoreWritten(bool success) { + #ifdef LULZBOT_EEPROM_BACKUP_SIZE + if (success && InterfaceSettingsScreen::backupEEPROM()) { + SERIAL_ECHOLNPGM("Made backup of EEPROM to SPI Flash"); + } + #else + UNUSED(success); + #endif + } + + void onConfigurationStoreRead(bool) { + } + + void onPlayTone(const uint16_t frequency, const uint16_t duration) { + sound.play_tone(frequency, duration); + } + + void onUserConfirmRequired(const char * const msg) { + if (msg) + ConfirmUserRequestAlertBox::show(msg); + else + ConfirmUserRequestAlertBox::hide(); + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/pin_mappings.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/pin_mappings.h new file mode 100644 index 000000000..c2818570f --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/pin_mappings.h @@ -0,0 +1,142 @@ +/****************** + * pin_mappings.h * + ******************/ + +/**************************************************************************** + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +/* This file defines mappings from the ULTRA_LCD pins functions to new + * functions for the FTDI display. These mappings allows any board that + * support ULTRA_LCD via EXP1 and EXP2 connectors to use FTDI modules + * without adding new pin definitions to the board. + */ + +#ifdef CR10_TFT_PINMAP + #ifndef __MARLIN_FIRMWARE__ + #error This pin mapping requires Marlin. + #endif + + #define CLCD_USE_SOFT_SPI + #define CLCD_SOFT_SPI_SCLK LCD_PINS_D4 // PORTA1 Pin 6 + #define CLCD_SOFT_SPI_MOSI LCD_PINS_ENABLE // PORTC1 Pin 8 + #define CLCD_SPI_CS LCD_PINS_RS // PORTA3 Pin 7 + #define CLCD_SOFT_SPI_MISO 16 // PORTC0 BTN_ENC Pin 2 + #define CLCD_MOD_RESET 11 // PORTD3 BTN_EN1 Pin 3 + #define CLCD_AUX_0 10 // PORTD2 BTN_EN2 Pin 5 + #define CLCD_AUX_1 BEEPER_PIN // PORTA4 Pin 1 +#endif + +/** + * The AlephObjects pinout for re-purposing the UltraLCD + * connector EXP1 for software SPI (rev B, obsolete) + */ + +#ifdef AO_EXP1_DEPRECATED_PINMAP + #ifndef __MARLIN_FIRMWARE__ + #error This pin mapping requires Marlin. + #endif + + #define CLCD_MOD_RESET LCD_PINS_D4 + #define CLCD_SPI_CS LCD_PINS_D5 + + #define CLCD_AUX_0 LCD_PINS_ENABLE + #define CLCD_AUX_1 BTN_ENC + #define CLCD_AUX_2 BEEPER_PIN + + #define CLCD_USE_SOFT_SPI + #define CLCD_SOFT_SPI_SCLK LCD_PINS_D7 + #define CLCD_SOFT_SPI_MOSI LCD_PINS_D6 + #define CLCD_SOFT_SPI_MISO LCD_PINS_RS +#endif + +/** + * AO_EXP1_PINMAP + * + * The AlephObjects mapping for re-purposing the UltraLCD + * connector EXP1 for software SPI for display (rev C): + * + * EXP2: FTDI: SD -or- USB [1]: ULTRA_LCD: + * 1 MISO MISO MISO --> BEEPER + * 2 SCLK SCLK SCLK --> BTN_ENC + * 3 PD_N - - --> LCDE + * 4 - CS_N CS_N --> LCDRS + * 5 CS_N - - --> LCD4 + * 6 MOSI MOSI MOSI --> LCD5 + * 7 - SD_DET INT --> LCD6 + * 8 RESET - RESET --> LCD4 + * 9 GND GND GND --> GND + * 10 5V 5V 5V --> 5V + * + * [1] At the moment, Marlin does not support SD or USB + * functionality over software SPI. + */ + +#ifdef AO_EXP1_PINMAP + #ifndef __MARLIN_FIRMWARE__ + #error This pin mapping requires Marlin. + #endif + + #define CLCD_MOD_RESET LCD_PINS_ENABLE + #define CLCD_SPI_CS LCD_PINS_D4 + + #define CLCD_USE_SOFT_SPI + #define CLCD_SOFT_SPI_SCLK BTN_ENC + #define CLCD_SOFT_SPI_MOSI LCD_PINS_D5 + #define CLCD_SOFT_SPI_MISO BEEPER_PIN +#endif + +/** + * AO_EXP2_PINMAP + * + * The AlephObjects mapping for re-purposing the UltraLCD + * connector EXP2 for hardware SPI for display and SD card + * or USB (rev C): + * + * EXP2: FTDI: SD -or- USB: ULTRA_LCD: + * 1 MISO MISO MISO --> MISO + * 2 SCLK SCLK SCLK --> SCLK + * 3 PD_N - - --> BTN_EN2 + * 4 - CS_N CS_N --> SD_CSEL + * 5 CS_N - - --> BTN_EN1 + * 6 MOSI MOSI MOSI --> MOSI + * 7 - SD_DET INT --> SD_DET + * 8 RESET - RESET --> RESET + * 9 GND GND GND --> GND + * 10 5V 5V 5V --> KILL [3] + * + * [1] This configuration is not compatible with the + * EinsyRetro 1.1a because there is a level shifter + * on MISO enabled by SD/USB chip select. + * + * [2] This configuration allows daisy-chaining of the + * display and SD/USB on EXP2. + * + * [3] Archim Rambo provides 5V on this pin. On any other + * board, divert this wire from the ribbon cable and + * connect it to 5V at an endstop. + */ + +#ifdef AO_EXP2_PINMAP + #ifndef __MARLIN_FIRMWARE__ + #error This pin mapping requires Marlin. + #endif + + #define CLCD_SPI_CS BTN_EN1 + #define CLCD_MOD_RESET BTN_EN2 +#endif diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/about_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/about_screen.cpp new file mode 100644 index 000000000..f27d1401f --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/about_screen.cpp @@ -0,0 +1,80 @@ +/******************** + * about_screen.cpp * + ********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +#define GRID_COLS 4 +#define GRID_ROWS 9 + +using namespace FTDI; +using namespace Theme; +using namespace ExtUI; + +void AboutScreen::onEntry() { + BaseScreen::onEntry(); + sound.play(chimes, PLAY_ASYNCHRONOUS); +} + +void AboutScreen::onRedraw(draw_mode_t) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .cmd(COLOR_RGB(bg_text_enabled)) + .tag(0); + + draw_text_box(cmd, BTN_POS(1,2), BTN_SIZE(4,1), F( + #ifdef LULZBOT_LCD_MACHINE_NAME + LULZBOT_LCD_MACHINE_NAME + #else + "Color Touch Panel" + #endif + ), OPT_CENTER, font_xlarge); + + cmd.tag(2); + draw_text_box(cmd, BTN_POS(1,3), BTN_SIZE(4,3), F( + #ifdef LULZBOT_LCD_TOOLHEAD_NAME + "Firmware for toolhead:\n" LULZBOT_LCD_TOOLHEAD_NAME "\n\n" + #endif + "(C) 2019 Aleph Objects, Inc.\n\nwww.lulzbot.com" + ), OPT_CENTER, font_medium); + + cmd.tag(0); + draw_text_box(cmd, BTN_POS(1,6), BTN_SIZE(4,2), progmem_str(getFirmwareName_str()), OPT_CENTER, font_medium); + + cmd.font(font_medium).colors(action_btn).tag(1).button(BTN_POS(2,8), BTN_SIZE(2,1), F("Okay")); +} + +bool AboutScreen::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_PREVIOUS(); return true; +#if ENABLED(DEVELOPER_SCREENS) + case 2: GOTO_SCREEN(DeveloperMenu); return true; +#endif + default: return false; + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/advanced_settings_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/advanced_settings_menu.cpp new file mode 100644 index 000000000..18159a5bd --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/advanced_settings_menu.cpp @@ -0,0 +1,191 @@ +/***************************** + * advance_settings_menu.cpp * + *****************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && !defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void AdvancedSettingsMenu::onRedraw(draw_mode_t what) { + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color)) + .cmd(CLEAR(true,true,true)); + } + + if (what & FOREGROUND) { + CommandProcessor cmd; + cmd.colors(normal_btn) + .font(Theme::font_medium) + #ifdef TOUCH_UI_PORTRAIT + #define GRID_ROWS 9 + #define GRID_COLS 2 + #if HAS_BED_PROBE + .enabled(1) + #else + .enabled(0) + #endif + .tag(2) .button( BTN_POS(1,1), BTN_SIZE(1,1), F("Z Offset ")) + .enabled(1) + .tag(3) .button( BTN_POS(2,1), BTN_SIZE(1,1), F("Steps/mm")) + #if HAS_TRINAMIC + .enabled(1) + #else + .enabled(0) + #endif + .tag(13).button( BTN_POS(1,5), BTN_SIZE(1,1), F("Motor mA")) + #if HAS_TRINAMIC + .enabled(1) + #else + .enabled(0) + #endif + .tag(14).button( BTN_POS(1,4), BTN_SIZE(1,1), F("Bump Sense")) + #if HOTENDS > 1 + .enabled(1) + #else + .enabled(0) + #endif + .tag(4) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("Nozzle Offset")) + #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR) + .enabled(1) + #else + .enabled(0) + #endif + .tag(11).button( BTN_POS(1,3), BTN_SIZE(1,1), F("Filament")) + .tag(12).button( BTN_POS(1,6), BTN_SIZE(1,1), F("Endstops")) + .tag(15).button( BTN_POS(2,6), BTN_SIZE(1,1), F("Display")) + .tag(9) .button( BTN_POS(1,7), BTN_SIZE(2,1), F("Interface Settings")) + .tag(10).button( BTN_POS(1,8), BTN_SIZE(2,1), F("Restore Factory Defaults")) + .tag(5) .button( BTN_POS(2,2), BTN_SIZE(1,1), F("Velocity ")) + .tag(6) .button( BTN_POS(2,3), BTN_SIZE(1,1), F("Acceleration")) + #if ENABLED(JUNCTION_DEVIATION) + .tag(7) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Junc Dev")) + #else + .tag(7) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Jerk")) + #endif + #if ENABLED(BACKLASH_GCODE) + .enabled(1) + #else + .enabled(0) + #endif + .tag(8).button( BTN_POS(2,5), BTN_SIZE(1,1), F("Backlash")) + .colors(action_btn) + .tag(1) .button( BTN_POS(1,9), BTN_SIZE(2,1), F("Back")); + #undef GRID_COLS + #undef GRID_ROWS + #else + #define GRID_ROWS 6 + #define GRID_COLS 3 + #if HAS_BED_PROBE + .enabled(1) + #else + .enabled(0) + #endif + .tag(2) .button( BTN_POS(1,1), BTN_SIZE(1,2), F("Z Offset ")) + .enabled(1) + .tag(3) .button( BTN_POS(2,1), BTN_SIZE(1,1), F("Steps/mm")) + #if HAS_TRINAMIC + .enabled(1) + #else + .enabled(0) + #endif + .tag(13).button( BTN_POS(3,1), BTN_SIZE(1,1), F("Motor mA")) + #if HAS_TRINAMIC + .enabled(1) + #else + .enabled(0) + #endif + .tag(14).button( BTN_POS(3,2), BTN_SIZE(1,1), F("Bump Sense")) + #if ENABLED(BACKLASH_GCODE) + .enabled(1) + #else + .enabled(0) + #endif + .tag(8).button( BTN_POS(3,3), BTN_SIZE(1,1), F("Backlash")) + #if HOTENDS > 1 + .enabled(1) + #else + .enabled(0) + #endif + .tag(4) .button( BTN_POS(1,3), BTN_SIZE(1,1), F("Nozzle Offsets")) + .tag(12).button( BTN_POS(3,4), BTN_SIZE(1,1), F("Endstops")) + .tag(5) .button( BTN_POS(2,2), BTN_SIZE(1,1), F("Velocity ")) + .tag(6) .button( BTN_POS(2,3), BTN_SIZE(1,1), F("Acceleration")) + #if ENABLED(JUNCTION_DEVIATION) + .tag(7) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Junc Dev")) + #else + .tag(7) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Jerk")) + #endif + .tag(11).button( BTN_POS(1,4), BTN_SIZE(1,1), F("Filament")) + .tag(15).button( BTN_POS(3,5), BTN_SIZE(1,1), F("Display")) + .tag(9) .button( BTN_POS(1,5), BTN_SIZE(2,1), F("Interface Settings")) + .tag(10).button( BTN_POS(1,6), BTN_SIZE(2,1), F("Restore Defaults")) + .colors(action_btn) + .tag(1) .button( BTN_POS(3,6), BTN_SIZE(1,1), F("Back")); + #endif + } +} + +bool AdvancedSettingsMenu::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: SaveSettingsDialogBox::promptToSaveSettings(); break; + #if HAS_BED_PROBE + case 2: GOTO_SCREEN(ZOffsetScreen); break; + #endif + case 3: GOTO_SCREEN(StepsScreen); break; + #if HOTENDS > 1 + case 4: GOTO_SCREEN(NozzleOffsetScreen); break; + #endif + case 5: GOTO_SCREEN(MaxVelocityScreen); break; + case 6: GOTO_SCREEN(DefaultAccelerationScreen); break; + case 7: + #if ENABLED(JUNCTION_DEVIATION) + GOTO_SCREEN(JunctionDeviationScreen); + #else + GOTO_SCREEN(JerkScreen); + #endif + break; + #if ENABLED(BACKLASH_GCODE) + case 8: GOTO_SCREEN(BacklashCompensationScreen); break; + #endif + case 9: GOTO_SCREEN(InterfaceSettingsScreen); LockScreen::check_passcode(); break; + case 10: GOTO_SCREEN(RestoreFailsafeDialogBox); LockScreen::check_passcode(); break; + #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR) + case 11: GOTO_SCREEN(FilamentMenu); break; + #endif + case 12: GOTO_SCREEN(EndstopStatesScreen); break; + #if HAS_TRINAMIC + case 13: GOTO_SCREEN(StepperCurrentScreen); break; + case 14: GOTO_SCREEN(StepperBumpSensitivityScreen); break; + #endif + case 15: GOTO_SCREEN(DisplayTuningScreen); break; + default: return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/alert_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/alert_dialog_box.cpp new file mode 100644 index 000000000..dfc119601 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/alert_dialog_box.cpp @@ -0,0 +1,70 @@ +/************************ + * alert_dialog_box.cpp * + ************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" +#include "screen_data.h" + +using namespace FTDI; +using namespace Theme; + +void AlertDialogBox::onEntry() { + BaseScreen::onEntry(); + sound.play(screen_data.AlertDialogBox.isError ? sad_trombone : twinkle, PLAY_ASYNCHRONOUS); +} + +void AlertDialogBox::onRedraw(draw_mode_t what) { + if (what & FOREGROUND) { + drawOkayButton(); + } +} + +template +void AlertDialogBox::show(const T message) { + drawMessage(message); + storeBackground(); + screen_data.AlertDialogBox.isError = false; + GOTO_SCREEN(AlertDialogBox); +} + +template +void AlertDialogBox::showError(const T message) { + drawMessage(message); + storeBackground(); + screen_data.AlertDialogBox.isError = true; + GOTO_SCREEN(AlertDialogBox); +} + +void AlertDialogBox::hide() { + if (AT_SCREEN(AlertDialogBox)) + GOTO_PREVIOUS(); +} + +template void AlertDialogBox::show(const char *); +template void AlertDialogBox::show(const progmem_str); +template void AlertDialogBox::showError(const char *); +template void AlertDialogBox::showError(const progmem_str); + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/backlash_compensation_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/backlash_compensation_screen.cpp new file mode 100644 index 000000000..a09b84b1b --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/backlash_compensation_screen.cpp @@ -0,0 +1,72 @@ +/************************************ + * backlash_compensation_screen.cpp * + ************************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(BACKLASH_GCODE) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void BacklashCompensationScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(2).units(PSTR("mm")); + w.heading( PSTR("Axis Backlash")); + w.color(x_axis).adjuster(2, PSTR("X:"), getAxisBacklash_mm(X)); + w.color(y_axis).adjuster(4, PSTR("Y:"), getAxisBacklash_mm(Y)); + w.color(z_axis).adjuster(6, PSTR("Z:"), getAxisBacklash_mm(Z)); + #if ENABLED(CALIBRATION_GCODE) + w.button(12, PSTR("Measure automatically")); + #endif + w.color(other).adjuster(8, PSTR("Smoothing:"), getBacklashSmoothing_mm()); + w.precision(0).units(PSTR("%")) + .adjuster(10, PSTR("Correction:"), getBacklashCorrection_percent()); + w.precision(2).increments(); +} + +bool BacklashCompensationScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(AxisBacklash_mm, X); break; + case 3: UI_INCREMENT(AxisBacklash_mm, X); break; + case 4: UI_DECREMENT(AxisBacklash_mm, Y); break; + case 5: UI_INCREMENT(AxisBacklash_mm, Y); break; + case 6: UI_DECREMENT(AxisBacklash_mm, Z); break; + case 7: UI_INCREMENT(AxisBacklash_mm, Z); break; + case 8: UI_DECREMENT(BacklashSmoothing_mm); break; + case 9: UI_INCREMENT(BacklashSmoothing_mm); break; + case 10: UI_DECREMENT_BY(BacklashCorrection_percent, increment*100); break; + case 11: UI_INCREMENT_BY(BacklashCorrection_percent, increment*100); break; + #if ENABLED(CALIBRATION_GCODE) + case 12: GOTO_SCREEN(ConfirmAutoCalibrationDialogBox); return true; + #endif + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_numeric_adjustment_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_numeric_adjustment_screen.cpp new file mode 100644 index 000000000..2fb5c98cb --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_numeric_adjustment_screen.cpp @@ -0,0 +1,342 @@ +/************************************** + * base_numeric_adjustment_screen.cpp * + **************************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" +#include "screen_data.h" + +using namespace FTDI; +using namespace Theme; + +#ifdef TOUCH_UI_PORTRAIT + #define GRID_COLS 13 + #define GRID_ROWS 10 +#else + #define GRID_COLS 18 + #define GRID_ROWS 7 +#endif + +BaseNumericAdjustmentScreen::widgets_t::widgets_t(draw_mode_t what) : _what(what) { + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)); + } + + if (what & FOREGROUND) { + CommandProcessor cmd; + cmd.font(font_medium) + .colors(action_btn) + #ifdef TOUCH_UI_PORTRAIT + .tag(1).button( BTN_POS(1,10), BTN_SIZE(13,1), F("Back")) + #else + .tag(1).button( BTN_POS(15,7), BTN_SIZE(4,1), F("Back")) + #endif + .colors(normal_btn); + } + + _line = 1; + _units = PSTR(""); +} + +BaseNumericAdjustmentScreen::widgets_t &BaseNumericAdjustmentScreen::widgets_t::precision(uint8_t decimals, precision_default_t initial) { + _decimals = decimals; + if (screen_data.BaseNumericAdjustmentScreen.increment == 0) { + screen_data.BaseNumericAdjustmentScreen.increment = 243 + (initial - DEFAULT_LOWEST) - _decimals; + } + return *this; +} + +void BaseNumericAdjustmentScreen::widgets_t::heading(const char *label) { + CommandProcessor cmd; + cmd.font(font_medium).cmd(COLOR_RGB(bg_text_enabled)); + if (_what & BACKGROUND) { + #ifdef TOUCH_UI_PORTRAIT + cmd.tag(0).fgcolor(bg_color).button( BTN_POS(1, _line), BTN_SIZE(12,1), progmem_str(label), OPT_FLAT); + #else + cmd.tag(0).fgcolor(bg_color).button( BTN_POS(5, _line), BTN_SIZE(8,1), progmem_str(label), OPT_FLAT); + #endif + } + + _line++; +} + +#ifdef TOUCH_UI_PORTRAIT + #ifdef TOUCH_UI_800x480 + #undef EDGE_R + #define EDGE_R 20 + #else + #undef EDGE_R + #define EDGE_R 10 + #endif +#endif + +void BaseNumericAdjustmentScreen::widgets_t::_draw_increment_btn(uint8_t, const uint8_t tag) { + CommandProcessor cmd; + const char *label = PSTR("?"); + uint8_t pos; + uint8_t & increment = screen_data.BaseNumericAdjustmentScreen.increment; + + if (increment == 0) { + increment = tag; // Set the default value to be the first. + } + + switch (tag) { + case 240: label = PSTR( ".001"); pos = _decimals - 3; break; + case 241: label = PSTR( ".01" ); pos = _decimals - 2; break; + case 242: label = PSTR( "0.1" ); pos = _decimals - 1; break; + case 243: label = PSTR( "1" ); pos = _decimals + 0; break; + case 244: label = PSTR( "10" ); pos = _decimals + 1; break; + default: label = PSTR("100" ); pos = _decimals + 2; break; + } + + cmd.tag(tag) + .colors(increment == tag ? action_btn : normal_btn) + #ifdef TOUCH_UI_PORTRAIT + .font(font_small); + #else + .font(font_medium); + #endif + switch (pos) { + #ifdef TOUCH_UI_PORTRAIT + case 0: cmd.button( BTN_POS(5,_line), BTN_SIZE(2,1), progmem_str(label)); break; + case 1: cmd.button( BTN_POS(7,_line), BTN_SIZE(2,1), progmem_str(label)); break; + case 2: cmd.button( BTN_POS(9,_line), BTN_SIZE(2,1), progmem_str(label)); break; + #else + case 0: cmd.button( BTN_POS(15,2), BTN_SIZE(4,1), progmem_str(label)); break; + case 1: cmd.button( BTN_POS(15,3), BTN_SIZE(4,1), progmem_str(label)); break; + case 2: cmd.button( BTN_POS(15,4), BTN_SIZE(4,1), progmem_str(label)); break; + #endif + } + cmd.colors(normal_btn); +} + + +void BaseNumericAdjustmentScreen::widgets_t::increments() { + if (_what & BACKGROUND) { + CommandProcessor cmd; + cmd.fgcolor(bg_color) + .tag(0) + #ifdef TOUCH_UI_PORTRAIT + .font(font_small).button( BTN_POS(1, _line), BTN_SIZE(4,1), F("Increment:"), OPT_FLAT); + #else + .font(font_medium).button( BTN_POS(15,1), BTN_SIZE(4,1), F("Increment:"), OPT_FLAT); + #endif + } + + if (_what & FOREGROUND) { + _draw_increment_btn(_line+1, 245 - _decimals); + _draw_increment_btn(_line+1, 244 - _decimals); + _draw_increment_btn(_line+1, 243 - _decimals); + } + + #ifdef TOUCH_UI_PORTRAIT + _line++; + #endif +} + +void BaseNumericAdjustmentScreen::widgets_t::adjuster_sram_val(uint8_t tag, const char *label, const char *value, bool is_enabled) { + CommandProcessor cmd; + + if (_what & BACKGROUND) { + cmd.enabled(1) + .font(font_small) + .fgcolor(_color) .tag(0).button( BTN_POS(5,_line), BTN_SIZE(5,1), F(""), OPT_FLAT) + .cmd(COLOR_RGB(bg_text_enabled)) + .fgcolor(bg_color) .tag(0).button( BTN_POS(1,_line), BTN_SIZE(4,1), (progmem_str) label, OPT_FLAT); + } + + if (_what & FOREGROUND) { + cmd.colors(normal_btn) + .font(font_medium) + .tag(is_enabled ? tag : 0).enabled(is_enabled).button( BTN_POS(10,_line), BTN_SIZE(2,1), F("-")) + .tag(is_enabled ? tag+1 : 0).enabled(is_enabled).button( BTN_POS(12,_line), BTN_SIZE(2,1), F("+")) + .tag(0).font(font_small) .text ( BTN_POS(5,_line), BTN_SIZE(5,1), is_enabled ? value : "-"); + } + + _line++; +} + +void BaseNumericAdjustmentScreen::widgets_t::adjuster(uint8_t tag, const char *label, const char *value, bool is_enabled) { + if (_what & BACKGROUND) { + adjuster_sram_val(tag, label, nullptr); + } + + if (_what & FOREGROUND) { + char b[strlen_P(value)+1]; + strcpy_P(b,value); + adjuster_sram_val(tag, label, b, is_enabled); + } +} + +void BaseNumericAdjustmentScreen::widgets_t::adjuster(uint8_t tag, const char *label, float value, bool is_enabled) { + if (_what & BACKGROUND) { + adjuster_sram_val(tag, label, nullptr); + } + + if (_what & FOREGROUND) { + char b[32]; + dtostrf(value, 5, _decimals, b); + strcat_P(b, PSTR(" ")); + strcat_P(b, (const char*) _units); + adjuster_sram_val(tag, label, b, is_enabled); + } +} + +void BaseNumericAdjustmentScreen::widgets_t::button(uint8_t tag, const char *label, bool is_enabled) { + if (_what & FOREGROUND) { + CommandProcessor cmd; + cmd.colors(normal_btn) + .tag(is_enabled ? tag : 0) + .enabled(is_enabled) + #ifdef TOUCH_UI_PORTRAIT + .font(font_small) + #else + .font(font_medium) + #endif + .button(BTN_POS(5,_line), BTN_SIZE(9,1), progmem_str(label)); + } + + _line++; +} + +void BaseNumericAdjustmentScreen::widgets_t::text_field(uint8_t tag, const char *label, const char *value, bool is_enabled) { + CommandProcessor cmd; + + if (_what & BACKGROUND) { + cmd.enabled(1) + .font(font_small) + .cmd(COLOR_RGB(bg_text_enabled)) + .fgcolor(_color).tag(0).button( BTN_POS(5,_line), BTN_SIZE(9,1), F(""), OPT_FLAT) + .fgcolor(bg_color) .tag(0).button( BTN_POS(1,_line), BTN_SIZE(4,1), (progmem_str) label, OPT_FLAT); + } + + if (_what & FOREGROUND) { + cmd.colors(normal_btn) + .font(font_medium) + .tag(tag).font(font_small).text ( BTN_POS(5,_line), BTN_SIZE(9,1), is_enabled ? value : "-"); + } + + _line++; +} + +void BaseNumericAdjustmentScreen::widgets_t::two_buttons(uint8_t tag1, const char *label1, uint8_t tag2, const char *label2, bool is_enabled) { + if (_what & FOREGROUND) { + CommandProcessor cmd; + cmd.enabled(is_enabled) + #ifdef TOUCH_UI_PORTRAIT + .font(font_small) + #else + .font(font_medium) + #endif + .tag(is_enabled ? tag1: 0).button(BTN_POS(5,_line), BTN_SIZE(4.5,1), progmem_str(label1)) + .tag(is_enabled ? tag2: 0).button(BTN_POS(9.5,_line), BTN_SIZE(4.5,1), progmem_str(label2)); + } + + _line++; +} + +void BaseNumericAdjustmentScreen::widgets_t::toggle(uint8_t tag, const char *label, const char *text, bool value, bool is_enabled) { + if (_what & BACKGROUND) { + CommandProcessor cmd; + cmd.fgcolor(bg_color) + .tag(0) + .font(font_small) + #ifdef TOUCH_UI_PORTRAIT + .button( BTN_POS(1, _line), BTN_SIZE( 8,1), progmem_str(label), OPT_FLAT); + #else + .button( BTN_POS(1, _line), BTN_SIZE(10,1), progmem_str(label), OPT_FLAT); + #endif + } + + if (_what & FOREGROUND) { + CommandProcessor cmd; + cmd.tag(is_enabled ? tag : 0) + .enabled(is_enabled) + .font(font_small) + .colors(ui_toggle) + #ifdef TOUCH_UI_PORTRAIT + .toggle(BTN_POS( 9,_line), BTN_SIZE(5,1), progmem_str(text), value); + #else + .toggle(BTN_POS(10,_line), BTN_SIZE(4,1), progmem_str(text), value); + #endif + } + + _line++; +} + +void BaseNumericAdjustmentScreen::widgets_t::home_buttons(uint8_t tag) { + if (_what & BACKGROUND) { + CommandProcessor cmd; + cmd.fgcolor(bg_color) + .tag(0) + .font(font_small) + .button( BTN_POS(1, _line), BTN_SIZE(4,1), F("Home:"), OPT_FLAT); + } + + if (_what & FOREGROUND) { + CommandProcessor cmd; + cmd + #ifdef TOUCH_UI_PORTRAIT + .font(font_small) + #else + .font(font_medium) + #endif + .tag(tag+0).button(BTN_POS(5,_line), BTN_SIZE(2,1), F("X")) + .tag(tag+1).button(BTN_POS(7,_line), BTN_SIZE(2,1), F("Y")) + .tag(tag+2).button(BTN_POS(9,_line), BTN_SIZE(2,1), F("Z")) + .tag(tag+3).button(BTN_POS(11,_line), BTN_SIZE(3,1), F("All")); + } + + _line++; +} + +void BaseNumericAdjustmentScreen::onEntry() { + screen_data.BaseNumericAdjustmentScreen.increment = 0; // This will force the increment to be picked while drawing. + BaseScreen::onEntry(); +} + +bool BaseNumericAdjustmentScreen::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_PREVIOUS(); return true; + case 240 ... 245: screen_data.BaseNumericAdjustmentScreen.increment = tag; break; + default: return current_screen.onTouchHeld(tag); + } + return true; +} + +float BaseNumericAdjustmentScreen::getIncrement() { + switch (screen_data.BaseNumericAdjustmentScreen.increment) { + case 240: return 0.001; + case 241: return 0.01; + case 242: return 0.1; + case 243: return 1.0; + case 244: return 10.0; + case 245: return 100.0; + default: return 0.0; + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_screen.cpp new file mode 100644 index 000000000..3dc356c53 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_screen.cpp @@ -0,0 +1,83 @@ +/******************* + * base_screen.cpp * + *******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; + +void BaseScreen::onEntry() { + CommandProcessor cmd; + cmd.set_button_style_callback(buttonStyleCallback); + UIScreen::onEntry(); +} + +bool BaseScreen::buttonStyleCallback(CommandProcessor &cmd, uint8_t tag, uint8_t &style, uint16_t &options, bool post) { + if (post) { + cmd.colors(normal_btn); + return false; + } + + #ifdef LCD_TIMEOUT_TO_STATUS + if (EventLoop::get_pressed_tag() != 0) { + reset_menu_timeout(); + } + #endif + + if (tag != 0 && EventLoop::get_pressed_tag() == tag) { + options = OPT_FLAT; + } + + if (style & cmd.STYLE_DISABLED) { + cmd.tag(0); + style &= ~cmd.STYLE_DISABLED; + cmd.colors(disabled_btn); + return true; // Call me again to reset the colors + } + return false; +} + +void BaseScreen::onIdle() { + #ifdef LCD_TIMEOUT_TO_STATUS + const uint32_t elapsed = millis() - last_interaction; + if (elapsed > uint32_t(LCD_TIMEOUT_TO_STATUS)) { + reset_menu_timeout(); + GOTO_SCREEN(StatusScreen); + } + #endif +} + +void BaseScreen::reset_menu_timeout() { + #ifdef LCD_TIMEOUT_TO_STATUS + last_interaction = millis(); + #endif +} + +#ifdef LCD_TIMEOUT_TO_STATUS + uint32_t BaseScreen::last_interaction; +#endif + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_advanced_settings.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_advanced_settings.cpp new file mode 100644 index 000000000..1fddbd654 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_advanced_settings.cpp @@ -0,0 +1,137 @@ +/***************************** + * bio_advanced_settings.cpp * + *****************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; + +void AdvancedSettingsMenu::onRedraw(draw_mode_t what) { + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color)) + .cmd(CLEAR(true,true,true)); + } + + if (what & FOREGROUND) { + CommandProcessor cmd; + cmd.colors(normal_btn) + .font(Theme::font_medium) + #define GRID_ROWS 9 + #define GRID_COLS 2 + + .tag(2) .button( BTN_POS(1,1), BTN_SIZE(1,1), F("Display")) + #if HAS_TRINAMIC + .enabled(1) + #else + .enabled(0) + #endif + .tag(3) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("Motor mA")) + #if HAS_TRINAMIC + .enabled(1) + #else + .enabled(0) + #endif + .tag(4) .button( BTN_POS(1,3), BTN_SIZE(1,1), F("Bump Sense")) + .tag(5) .button( BTN_POS(1,4), BTN_SIZE(1,1), F("Endstops")) + #if HOTENDS > 1 + .enabled(1) + #else + .enabled(0) + #endif + .tag(6) .button( BTN_POS(1,5), BTN_SIZE(1,1), F("Nozzle Offset")) + + + .tag(7) .button( BTN_POS(2,1), BTN_SIZE(1,1), F("Steps/mm")) + .tag(8) .button( BTN_POS(2,2), BTN_SIZE(1,1), F("Velocity ")) + .tag(9) .button( BTN_POS(2,3), BTN_SIZE(1,1), F("Acceleration")) + #if ENABLED(JUNCTION_DEVIATION) + .tag(10) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Junc Dev")) + #else + .tag(10) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Jerk")) + #endif + #if ENABLED(BACKLASH_GCODE) + .enabled(1) + #else + .enabled(0) + #endif + .tag(11) .button( BTN_POS(2,5), BTN_SIZE(1,1), F("Backlash")) + #if ENABLED(LIN_ADVANCE) + .enabled(1) + #else + .enabled(0) + #endif + .tag(12) .button( BTN_POS(1,6), BTN_SIZE(2,1), F("Linear Advance")) + .tag(13) .button( BTN_POS(1,7), BTN_SIZE(2,1), F("Interface Settings")) + .tag(14) .button( BTN_POS(1,8), BTN_SIZE(2,1), F("Restore Factory Defaults")) + .colors(action_btn) + .tag(1). button( BTN_POS(1,9), BTN_SIZE(2,1), F("Back")); + #undef GRID_COLS + #undef GRID_ROWS + } +} + +bool AdvancedSettingsMenu::onTouchEnd(uint8_t tag) { + using namespace ExtUI; + + switch (tag) { + case 1: SaveSettingsDialogBox::promptToSaveSettings(); break; + case 2: GOTO_SCREEN(DisplayTuningScreen); break; + #if HAS_TRINAMIC + case 3: GOTO_SCREEN(StepperCurrentScreen); break; + case 4: GOTO_SCREEN(StepperBumpSensitivityScreen); break; + #endif + case 5: GOTO_SCREEN(EndstopStatesScreen); break; + #if HOTENDS > 1 + case 6: GOTO_SCREEN(NozzleOffsetScreen); break; + #endif + + case 7: GOTO_SCREEN(StepsScreen); break; + case 8: GOTO_SCREEN(MaxVelocityScreen); break; + case 9: GOTO_SCREEN(DefaultAccelerationScreen); break; + case 10: + #if ENABLED(JUNCTION_DEVIATION) + GOTO_SCREEN(JunctionDeviationScreen); + #else + GOTO_SCREEN(JerkScreen); + #endif + break; + #if ENABLED(BACKLASH_GCODE) + case 11: GOTO_SCREEN(BacklashCompensationScreen); break; + #endif + #if ENABLED(LIN_ADVANCE) + case 12: GOTO_SCREEN(LinearAdvanceScreen); break; + #endif + case 13: GOTO_SCREEN(InterfaceSettingsScreen); break; + case 14: GOTO_SCREEN(RestoreFailsafeDialogBox); break; + + default: + return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_e.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_e.cpp new file mode 100644 index 000000000..c106db242 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_e.cpp @@ -0,0 +1,56 @@ +/**************************** + * bio_confirm_home_xyz.cpp * + ****************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" + +using namespace FTDI; + +void BioConfirmHomeE::onRedraw(draw_mode_t) { + drawMessage(F("About to re-home plunger and auto-level. Remove syringe prior to proceeding.\n\nContinue?")); + drawYesNoButtons(1); +} + +bool BioConfirmHomeE::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: + SpinnerDialogBox::enqueueAndWait_P(F( + "G112\n" /* Home extruder */ + LULZBOT_AXIS_LEVELING_COMMANDS /* Level X axis */ + "G0 X115 Z50 F6000\n" /* Goto loading position */ + "M400\n" /* Wait for moves to finish */ + "M18 X Y" /* Unlock motors */ + )); + current_screen.forget(); + break; + case 2: + GOTO_SCREEN(StatusScreen); + break; + default: + return DialogBoxBaseClass::onTouchEnd(tag); + } + return true; +} +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_xyz.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_xyz.cpp new file mode 100644 index 000000000..dbd04fc35 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_xyz.cpp @@ -0,0 +1,53 @@ +/**************************** + * bio_confirm_home_xyz.cpp * + ****************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" + +using namespace FTDI; + +void BioConfirmHomeXYZ::onRedraw(draw_mode_t) { + drawMessage(F("About to home to loading position.\nEnsure the top and the bed of the printer are clear.\n\nContinue?")); + drawYesNoButtons(1); +} + +bool BioConfirmHomeXYZ::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: + SpinnerDialogBox::enqueueAndWait_P(F( + "G28 X Y Z\n" /* Home all axis */ + "G0 X115 Z50 F6000" /* Move to park position */ + )); + current_screen.forget(); + break; + case 2: + GOTO_SCREEN(StatusScreen); + break; + default: + return DialogBoxBaseClass::onTouchEnd(tag); + } + return true; +} +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_main_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_main_menu.cpp new file mode 100644 index 000000000..0a42bc580 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_main_menu.cpp @@ -0,0 +1,79 @@ +/********************* + * bio_main_menu.cpp * + *********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; + +void MainMenu::onRedraw(draw_mode_t what) { + #define GRID_ROWS 8 + #define GRID_COLS 2 + + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color)) + .cmd(CLEAR(true,true,true)); + } + + if (what & FOREGROUND) { + CommandProcessor cmd; + cmd.cmd(COLOR_RGB(bg_text_enabled)) + .font(font_large).text( BTN_POS(1,1), BTN_SIZE(2,1), F("Main Menu")) + .colors(normal_btn) + .font(font_medium) + .tag(2).button( BTN_POS(1,2), BTN_SIZE(2,1), F("Load Syringe")) + .tag(3).button( BTN_POS(1,3), BTN_SIZE(2,1), F("Unlock XY Axis")) + .tag(4).button( BTN_POS(1,4), BTN_SIZE(2,1), F("Bed Temperature")) + .tag(5).button( BTN_POS(1,5), BTN_SIZE(2,1), F("Interface Settings")) + .tag(6).button( BTN_POS(1,6), BTN_SIZE(2,1), F("Advanced Settings")) + .tag(7).button( BTN_POS(1,7), BTN_SIZE(2,1), F("About Printer")) + .colors(action_btn) + .tag(1).button( BTN_POS(1,8), BTN_SIZE(2,1), F("Back")); + } + + #undef GRID_COLS + #undef GRID_ROWS +} + +bool MainMenu::onTouchEnd(uint8_t tag) { + using namespace ExtUI; + + switch (tag) { + case 1: SaveSettingsDialogBox::promptToSaveSettings(); break; + case 2: GOTO_SCREEN(BioConfirmHomeXYZ); break; + case 3: StatusScreen::unlockMotors(); break; + case 4: GOTO_SCREEN(TemperatureScreen); break; + case 5: GOTO_SCREEN(InterfaceSettingsScreen); break; + case 6: GOTO_SCREEN(AdvancedSettingsMenu); break; + case 7: GOTO_SCREEN(AboutScreen); break; + default: + return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printer_ui.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printer_ui.h new file mode 100644 index 000000000..6ff6c8a46 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printer_ui.h @@ -0,0 +1,75 @@ + +/**************************************************************************** + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +/** + * This file was auto-generated using "svg2cpp.pl" + * + * The encoding consists of x,y pairs with the min and max scaled to + * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the + * start of a new closed path. + */ + +#pragma once + +constexpr float x_min = 0.000000; + +constexpr float x_max = 272.000000; + +constexpr float y_min = 0.000000; + +constexpr float y_max = 480.000000; + +const PROGMEM uint16_t z_neg[] = {0xC9B1, 0x96B3, 0xD990, 0x96B3, 0xD990, 0xA8D0, 0xE17F, 0xA8D0, 0xD1A0, 0xB1DF, 0xC1C2, 0xA8D0, 0xC9B1, 0xA8D0, 0xC9B1, 0x96B3}; + +const PROGMEM uint16_t z_pos[] = {0xC9B1, 0x8DA4, 0xD990, 0x8DA4, 0xD990, 0x7B86, 0xE17F, 0x7B86, 0xD1A0, 0x7277, 0xC1C2, 0x7B86, 0xC9B1, 0x7B86, 0xC9B1, 0x8DA4}; + +const PROGMEM uint16_t y_neg[] = {0x5037, 0x9979, 0x6264, 0x9979, 0x5529, 0xA92A, 0x5E3F, 0xA92A, 0x4575, 0xB103, 0x39E6, 0xA92A, 0x42FC, 0xA92A, 0x5037, 0x9979}; + +const PROGMEM uint16_t y_pos[] = {0x5D72, 0x89C7, 0x6F9F, 0x89C7, 0x7CDA, 0x7A15, 0x85F0, 0x7A15, 0x7A61, 0x723D, 0x6197, 0x7A15, 0x6AAD, 0x7A15, 0x5D72, 0x89C7}; + +const PROGMEM uint16_t x_neg[] = {0x513D, 0x8DB3, 0x4AA0, 0x958C, 0x2647, 0x958C, 0x22F8, 0x9979, 0x1769, 0x91A0, 0x3033, 0x89C7, 0x2CE4, 0x8DB3, 0x513D, 0x8DB3}; + +const PROGMEM uint16_t x_pos[] = {0x7566, 0x8DB3, 0x6EC9, 0x958C, 0x9322, 0x958C, 0x8FD4, 0x9979, 0xA89E, 0x91A0, 0x9D0E, 0x89C7, 0x99C0, 0x8DB3, 0x7566, 0x8DB3}; + +const PROGMEM uint16_t syringe_fluid[] = {0x7D1D, 0x4A0F, 0x87FC, 0x4C0E, 0x8CF4, 0x4C0E, 0x9801, 0x4A0F, 0x9801, 0x1AA2, 0x7D1D, 0x1AA2, 0x7D1D, 0x4A0F}; + +const PROGMEM uint16_t syringe[] = {0x83C2, 0x42AA, 0x83C2, 0x43FF, 0x8D2C, 0x43FF, 0x8D2C, 0x42AA, 0xFFFF, 0x83C2, 0x3D54, 0x83C2, 0x3EAA, 0x8D2C, 0x3EAA, 0x8D2C, 0x3D54, 0xFFFF, 0x83C2, 0x37FF, 0x83C2, 0x3954, 0x8D2C, 0x3954, 0x8D2C, 0x37FF, 0xFFFF, 0x83C2, 0x32AA, 0x83C2, 0x33FF, 0x8D2C, 0x33FF, 0x8D2C, 0x32AA, 0xFFFF, 0x83C2, 0x2D54, 0x83C2, 0x2EAA, 0x8D2C, 0x2EAA, 0x8D2C, 0x2D54, 0xFFFF, 0x83C2, 0x27FF, 0x83C2, 0x2955, 0x8D2C, 0x2955, 0x8D2C, 0x27FF, 0xFFFF, 0x83C2, 0x22AA, 0x83C2, 0x23FF, 0x8D2C, 0x23FF, 0x8D2C, 0x22AA, 0xFFFF, 0x7AC7, 0x0F4B, 0x7AC7, 0x134A, 0x855B, 0x134A, 0x855B, 0x1949, 0x7AC7, 0x1949, 0x7AC7, 0x4B40, 0x855B, 0x4D40, 0x855B, 0x533F, 0x88E2, 0x533F, 0x88E2, 0x653C, 0x8C69, 0x673C, 0x8C69, 0x533F, 0x8FF0, 0x533F, 0x8FF0, 0x4D40, 0x9A85, 0x4B40, 0x9A85, 0x1949, 0x8FF0, 0x1949, 0x8FF0, 0x134A, 0x9A85, 0x134A, 0x9A85, 0x0F4B, 0xFFFF, 0x88E2, 0x134A, 0x8C69, 0x134A, 0x8C69, 0x1949, 0x88E2, 0x1949, 0x88E2, 0x134A, 0xFFFF, 0x7E4D, 0x1B49, 0x96FE, 0x1B49, 0x96FE, 0x4941, 0x8C69, 0x4B40, 0x88E2, 0x4B40, 0x7E4D, 0x4941, 0x7E4D, 0x1B49}; + +const PROGMEM uint16_t syringe_outline[] = {0x7AC7, 0x0F4B, 0x7AC7, 0x134A, 0x855B, 0x134A, 0x855B, 0x1949, 0x7AC7, 0x1949, 0x7AC7, 0x4B40, 0x855B, 0x4D40, 0x855B, 0x533F, 0x88E2, 0x533F, 0x88E2, 0x653C, 0x8C69, 0x673C, 0x8C69, 0x533F, 0x8FF0, 0x533F, 0x8FF0, 0x4D40, 0x9A85, 0x4B40, 0x9A85, 0x1949, 0x8FF0, 0x1949, 0x8FF0, 0x134A, 0x9A85, 0x134A, 0x9A85, 0x0F4B, 0x7AC7, 0x0F4B}; + +const PROGMEM uint16_t padlock[] = {0x645A, 0x8017, 0x5F9E, 0x80A1, 0x5BBA, 0x821B, 0x5911, 0x844A, 0x580A, 0x86F7, 0x580A, 0x8931, 0x5970, 0x8A98, 0x5C49, 0x8A98, 0x5DB0, 0x8931, 0x5DB0, 0x8703, 0x5E3C, 0x858E, 0x5FAA, 0x845F, 0x61C5, 0x8394, 0x645A, 0x834A, 0x66F0, 0x8394, 0x690C, 0x845F, 0x6A7A, 0x858D, 0x6B07, 0x8703, 0x6B07, 0x8F23, 0x57C8, 0x8F23, 0x551E, 0x8FC3, 0x5404, 0x9145, 0x5404, 0x9C8F, 0x551E, 0x9E11, 0x57C8, 0x9EB1, 0x70EE, 0x9EB1, 0x7398, 0x9E11, 0x74B2, 0x9C8F, 0x74B2, 0x9145, 0x7398, 0x8FC3, 0x70EE, 0x8F23, 0x70AC, 0x86FA, 0x6FA5, 0x844A, 0x6CFD, 0x821B, 0x6917, 0x80A1}; + +const PROGMEM uint16_t home_z[] = {0xD6C9, 0x80CC, 0xBB53, 0x905B, 0xC231, 0x905B, 0xC231, 0x9FEB, 0xCFEC, 0x9FEB, 0xCFEC, 0x9823, 0xDDA7, 0x9823, 0xDDA7, 0x9FEB, 0xEB62, 0x9FEB, 0xEB62, 0x905B, 0xF240, 0x905B, 0xE7A3, 0x8A58, 0xE7A3, 0x82CD, 0xE0C6, 0x82CD, 0xE0C6, 0x8674}; + +const PROGMEM uint16_t home_e[] = {0xB94F, 0x25AA, 0x9DD8, 0x353A, 0xA4B6, 0x353A, 0xA4B6, 0x44C9, 0xB271, 0x44C9, 0xB271, 0x3D02, 0xC02C, 0x3D02, 0xC02C, 0x44C9, 0xCDE7, 0x44C9, 0xCDE7, 0x353A, 0xD4C5, 0x353A, 0xCA28, 0x2F36, 0xCA28, 0x27AB, 0xC34B, 0x27AB, 0xC34B, 0x2B53}; + +const PROGMEM uint16_t bed_icon[] = {0x1764, 0x2C4C, 0x6135, 0x2C4C, 0x6135, 0x40A8, 0x1764, 0x40A8}; + +const PROGMEM uint16_t actual_temp[] = {0x1764, 0x466F, 0x6135, 0x466F, 0x6135, 0x5ACB, 0x1764, 0x5ACB}; + +const PROGMEM uint16_t target_temp[] = {0x1764, 0x1228, 0x6135, 0x1228, 0x6135, 0x2684, 0x1764, 0x2684}; + +const PROGMEM uint16_t fine_label[] = {0x1AA7, 0xC6D2, 0x9387, 0xC6D2, 0x9387, 0xD316, 0x1AA7, 0xD316}; + +const PROGMEM uint16_t fine_toggle[] = {0x9C10, 0xC6D2, 0xE4A3, 0xC6D2, 0xE4A3, 0xD316, 0x9C10, 0xD316}; + +const PROGMEM uint16_t usb_btn[] = {0x0B68, 0xE880, 0x7B1A, 0xE880, 0x7B1A, 0xF94B, 0x0B68, 0xF94B, 0x0B68, 0xE880}; + +const PROGMEM uint16_t menu_btn[] = {0x84E3, 0xE880, 0xF495, 0xE880, 0xF495, 0xF94B, 0x84E3, 0xF94B, 0x84E3, 0xE880}; + +const PROGMEM uint16_t e_pos[] = {0xC9B1, 0x3B2D, 0xD990, 0x3B2D, 0xD990, 0x4D4B, 0xE17F, 0x4D4B, 0xD1A0, 0x565A, 0xC1C2, 0x4D4B, 0xC9B1, 0x4D4B, 0xC9B1, 0x3B2D}; + +const PROGMEM uint16_t e_neg[] = {0xC9B1, 0x321E, 0xD990, 0x321E, 0xD990, 0x2000, 0xE17F, 0x2000, 0xD1A0, 0x16F1, 0xC1C2, 0x2000, 0xC9B1, 0x2000, 0xC9B1, 0x321E}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printing_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printing_dialog_box.cpp new file mode 100644 index 000000000..e77f04784 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printing_dialog_box.cpp @@ -0,0 +1,155 @@ +/******************************* + * bio_printing_dialog_box.cpp * + *******************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" + +#include "../ftdi_eve_lib/extras/circular_progress.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +#define GRID_COLS 2 +#define GRID_ROWS 9 + +void BioPrintingDialogBox::draw_status_message(draw_mode_t what, const char* message) { + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(COLOR_RGB(bg_text_enabled)); + draw_text_box(cmd, BTN_POS(1,2), BTN_SIZE(2,2), message, OPT_CENTER, font_large); + } +} + +void BioPrintingDialogBox::draw_progress(draw_mode_t what) { + if (what & FOREGROUND) { + CommandProcessor cmd; + cmd.font(font_large) + .text(BTN_POS(1,1), BTN_SIZE(2,2), isPrinting() ? F("Printing...") : F("Finished.")) + .tag(1) + .font(font_xlarge); + + draw_circular_progress(cmd, BTN_POS(1,4), BTN_SIZE(2,3), getProgress_percent(), theme_dark, theme_darkest); + } +} + +void BioPrintingDialogBox::draw_time_remaining(draw_mode_t what) { + if (what & FOREGROUND) { + const uint32_t elapsed = getProgress_seconds_elapsed(); + const uint8_t hrs = elapsed/3600; + const uint8_t min = (elapsed/60)%60; + + char time_str[10]; + sprintf_P(time_str, PSTR("%02dh %02dm"), hrs, min); + + CommandProcessor cmd; + cmd.font(font_large) + .text(BTN_POS(1,7), BTN_SIZE(2,2), time_str); + } +} + +void BioPrintingDialogBox::draw_interaction_buttons(draw_mode_t what) { + if (what & FOREGROUND) { + CommandProcessor cmd; + cmd.colors(normal_btn) + .font(font_medium) + .colors(isPrinting() ? action_btn : normal_btn) + .tag(2).button(BTN_POS(1,9), BTN_SIZE(1,1), F("Menu")) + #if ENABLED(SDSUPPORT) + .enabled(isPrinting() ? isPrintingFromMedia() : 1) + #else + .enabled(isPrinting() ? 0 : 1) + #endif + .tag(3) + .colors(isPrinting() ? normal_btn : action_btn) + .button( BTN_POS(2,9), BTN_SIZE(1,1), isPrinting() ? F("Cancel") : F("Back")); + } +} + +void BioPrintingDialogBox::onRedraw(draw_mode_t what) { + if (what & FOREGROUND) { + draw_progress(FOREGROUND); + draw_time_remaining(FOREGROUND); + draw_interaction_buttons(FOREGROUND); + } +} + +bool BioPrintingDialogBox::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_SCREEN(FeedratePercentScreen); break; + case 2: GOTO_SCREEN(TuneMenu); break; + case 3: + if (isPrinting()) { + GOTO_SCREEN(ConfirmAbortPrintDialogBox); + } else { + GOTO_SCREEN(StatusScreen); + } + break; + default: return false; + } + return true; +} + +void BioPrintingDialogBox::setStatusMessage(progmem_str message) { + char buff[strlen_P((const char * const)message)+1]; + strcpy_P(buff, (const char * const) message); + setStatusMessage(buff); +} + +void BioPrintingDialogBox::setStatusMessage(const char* message) { + CommandProcessor cmd; + cmd.cmd(CMD_DLSTART) + .cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)); + + draw_status_message(BACKGROUND, message); + draw_progress(BACKGROUND); + draw_time_remaining(BACKGROUND); + draw_interaction_buttons(BACKGROUND); + storeBackground(); + + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("New status message: ", message); + #endif + + if (AT_SCREEN(BioPrintingDialogBox)) { + current_screen.onRefresh(); + } +} + +void BioPrintingDialogBox::onIdle() { + if (refresh_timer.elapsed(STATUS_UPDATE_INTERVAL)) { + onRefresh(); + refresh_timer.start(); + } + BaseScreen::onIdle(); +} + +void BioPrintingDialogBox::show() { + GOTO_SCREEN(BioPrintingDialogBox); +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_status_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_status_screen.cpp new file mode 100644 index 000000000..7e119a5e1 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_status_screen.cpp @@ -0,0 +1,349 @@ +/************************* + * bio_status_screen.cpp * + *************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" + +#include "../ftdi_eve_lib/extras/poly_ui.h" +#include "bio_printer_ui.h" + +#define E_TRAVEL_LIMIT 60 + +#define GRID_COLS 2 +#define GRID_ROWS 9 + +#define POLY(A) PolyUI::poly_reader_t(A, sizeof(A)/sizeof(A[0])) + +#if ENABLED(SDSUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP) + #include "../../../../sd/cardreader.h" +#endif + +const uint8_t shadow_depth = 5; + +using namespace FTDI; +using namespace Theme; +using namespace ExtUI; + +float StatusScreen::increment; +bool StatusScreen::jog_xy; +bool StatusScreen::fine_motion; + +void StatusScreen::unlockMotors() { + injectCommands_P(PSTR("M84 XY")); + jog_xy = false; +} + +void StatusScreen::draw_temperature(draw_mode_t what) { + CommandProcessor cmd; + PolyUI ui(cmd, what); + + int16_t x, y, h, v; + + cmd.tag(15); + + if (what & BACKGROUND) { + cmd.cmd(COLOR_RGB(bg_color)); + + // Draw touch surfaces + ui.bounds(POLY(target_temp), x, y, h, v); + cmd.rectangle(x, y, h, v); + ui.bounds(POLY(actual_temp), x, y, h, v); + cmd.rectangle(x, y, h, v); + ui.bounds(POLY(bed_icon), x, y, h, v); + cmd.rectangle(x, y, h, v); + + // Draw bed icon + cmd.cmd(BITMAP_SOURCE(Bed_Heat_Icon_Info)) + .cmd(BITMAP_LAYOUT(Bed_Heat_Icon_Info)) + .cmd(BITMAP_SIZE (Bed_Heat_Icon_Info)) + .cmd(COLOR_RGB(shadow_rgb)) + .icon (x + 2, y + 2, h, v, Bed_Heat_Icon_Info, icon_scale * 2) + .cmd(COLOR_RGB(bg_text_enabled)) + .icon (x, y, h, v, Bed_Heat_Icon_Info, icon_scale * 2); + } + + if (what & FOREGROUND) { + char bed_str[15]; + + cmd.font(font_xlarge) + .cmd(COLOR_RGB(bg_text_enabled)); + + if (!isHeaterIdle(BED) && getTargetTemp_celsius(BED) > 0) { + sprintf_P(bed_str, PSTR("%-3d C"), ROUND(getTargetTemp_celsius(BED))); + ui.bounds(POLY(target_temp), x, y, h, v); + cmd.text(x, y, h, v, bed_str); + } + + sprintf_P(bed_str, PSTR("%-3d C"), ROUND(getActualTemp_celsius(BED))); + ui.bounds(POLY(actual_temp), x, y, h, v); + cmd.text(x, y, h, v, bed_str); + } +} + +void StatusScreen::draw_syringe(draw_mode_t what) { + int16_t x, y, h, v; + const float fill_level = 1.0 - min(1.0, max(0.0, getAxisPosition_mm(E0) / E_TRAVEL_LIMIT)); + const bool e_homed = isAxisPositionKnown(E0); + + CommandProcessor cmd; + PolyUI ui(cmd, what); + + if (what & BACKGROUND) { + // Paint the shadow for the syringe + ui.color(shadow_rgb); + ui.shadow(POLY(syringe_outline), shadow_depth); + } + + if (what & FOREGROUND && e_homed) { + // Paint the syringe icon + ui.color(syringe_rgb); + ui.fill(POLY(syringe_outline)); + + ui.color(fill_rgb); + ui.bounds(POLY(syringe_fluid), x, y, h, v); + cmd.cmd(SAVE_CONTEXT()); + cmd.cmd(SCISSOR_XY(x,y + v * (1.0 - fill_level))); + cmd.cmd(SCISSOR_SIZE(h, v * fill_level)); + ui.fill(POLY(syringe_fluid), false); + cmd.cmd(RESTORE_CONTEXT()); + + ui.color(stroke_rgb); + ui.fill(POLY(syringe)); + } +} + +void StatusScreen::draw_arrows(draw_mode_t what) { + const bool e_homed = isAxisPositionKnown(E0); + const bool z_homed = isAxisPositionKnown(Z); + + CommandProcessor cmd; + PolyUI ui(cmd, what); + + ui.button_fill (fill_rgb); + ui.button_stroke(stroke_rgb, 28); + ui.button_shadow(shadow_rgb, shadow_depth); + + if ((what & BACKGROUND) || jog_xy) { + ui.button(1, POLY(x_neg)); + ui.button(2, POLY(x_pos)); + ui.button(3, POLY(y_neg)); + ui.button(4, POLY(y_pos)); + } + + if ((what & BACKGROUND) || z_homed) { + ui.button(5, POLY(z_neg)); + ui.button(6, POLY(z_pos)); + } + + if ((what & BACKGROUND) || e_homed) { + ui.button(7, POLY(e_neg)); + ui.button(8, POLY(e_pos)); + } +} + +void StatusScreen::draw_fine_motion(draw_mode_t what) { + int16_t x, y, h, v; + CommandProcessor cmd; + PolyUI ui(cmd, what); + + cmd.font(font_medium) + .tag(16); + + if (what & BACKGROUND) { + + ui.bounds(POLY(fine_label), x, y, h, v); + cmd.cmd(COLOR_RGB(bg_text_enabled)) + .text(x, y, h, v, F("Fine motion:")); + } + + if (what & FOREGROUND) { + ui.bounds(POLY(fine_toggle), x, y, h, v); + cmd.colors(ui_toggle) + .toggle(x, y, h, v, F("no\xFFyes"), fine_motion); + } +} + +void StatusScreen::draw_overlay_icons(draw_mode_t what) { + const bool e_homed = isAxisPositionKnown(E0); + const bool z_homed = isAxisPositionKnown(Z); + + CommandProcessor cmd; + PolyUI ui(cmd, what); + + if (what & FOREGROUND) { + ui.button_fill (fill_rgb); + ui.button_stroke(stroke_rgb, 28); + ui.button_shadow(shadow_rgb, shadow_depth); + + if (!jog_xy) { + ui.button(12, POLY(padlock)); + } + + if (!e_homed) { + ui.button(13, POLY(home_e)); + } + + if (!z_homed) { + ui.button(14, POLY(home_z)); + } + } +} + +void StatusScreen::draw_buttons(draw_mode_t) { + const bool has_media = isMediaInserted() && !isPrintingFromMedia(); + + CommandProcessor cmd; + + cmd.font(font_medium) + .colors(normal_btn) + #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP) + .enabled(!Sd2Card::ready() || has_media) + #else + .enabled(has_media) + #endif + .colors(has_media ? action_btn : normal_btn) + .tag(9).button(BTN_POS(1,9), BTN_SIZE(1,1), + isPrintingFromMedia() ? + F("Printing") : + #if ENABLED(USB_FLASH_DRIVE_SUPPORT) + #ifdef LULZBOT_MANUAL_USB_STARTUP + (Sd2Card::ready() ? F("USB Drive") : F("Enable USB")) + #else + F("USB Drive") + #endif + #else + F("SD Card") + #endif + ); + + cmd.colors(!has_media ? action_btn : normal_btn).tag(10).button(BTN_POS(2,9), BTN_SIZE(1,1), F("Menu")); +} + +void StatusScreen::onStartup() { + // Load the bitmaps for the status screen + constexpr uint32_t base = ftdi_memory_map::RAM_G; + CLCD::mem_write_pgm(base + Bed_Heat_Icon_Info.RAMG_offset, Bed_Heat_Icon, sizeof(Bed_Heat_Icon)); +} + +void StatusScreen::onRedraw(draw_mode_t what) { + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)); + cmd.cmd(CLEAR(true,true,true)); + } + + draw_syringe(what); + draw_temperature(what); + draw_arrows(what); + draw_overlay_icons(what); + draw_buttons(what); + draw_fine_motion(what); +} + +bool StatusScreen::onTouchStart(uint8_t) { + increment = fine_motion ? 0.25 : 1; + return true; +} + +bool StatusScreen::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: + case 2: + case 3: + case 4: + case 12: + if (!jog_xy) { + jog_xy = true; + injectCommands_P(PSTR("M17")); + } + break; + case 9: + #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP) + if (!Sd2Card::ready()) { + StatusScreen::setStatusMessage(F("Insert USB drive...")); + Sd2Card::usbStartup(); + } else { + GOTO_SCREEN(FilesScreen); + } + #else + GOTO_SCREEN(FilesScreen); + #endif + break; + case 10: GOTO_SCREEN(MainMenu); break; + case 13: SpinnerDialogBox::enqueueAndWait_P(F("G112")); break; + case 14: SpinnerDialogBox::enqueueAndWait_P(F("G28 Z")); break; + case 15: GOTO_SCREEN(TemperatureScreen); break; + case 16: fine_motion = !fine_motion; break; + default: return false; + } + // If a passcode is enabled, the LockScreen will prevent the + // user from proceeding. + LockScreen::check_passcode(); + return true; +} + +bool StatusScreen::onTouchHeld(uint8_t tag) { + if (tag >= 1 && tag <= 4 && !jog_xy) return false; + if (ExtUI::isMoving()) return false; // Don't allow moves to accumulate + #define UI_INCREMENT_AXIS(axis) MoveAxisScreen::setManualFeedrate(axis, increment); UI_INCREMENT(AxisPosition_mm, axis); + #define UI_DECREMENT_AXIS(axis) MoveAxisScreen::setManualFeedrate(axis, increment); UI_DECREMENT(AxisPosition_mm, axis); + switch (tag) { + case 1: UI_DECREMENT_AXIS(X); break; + case 2: UI_INCREMENT_AXIS(X); break; + case 4: UI_DECREMENT_AXIS(Y); break; // NOTE: Y directions inverted because bed rather than needle moves + case 3: UI_INCREMENT_AXIS(Y); break; + case 5: UI_DECREMENT_AXIS(Z); break; + case 6: UI_INCREMENT_AXIS(Z); break; + case 7: UI_DECREMENT_AXIS(E0); break; + case 8: UI_INCREMENT_AXIS(E0); break; + default: return false; + } + #undef UI_DECREMENT_AXIS + #undef UI_INCREMENT_AXIS + if (increment < 10 && !fine_motion) + increment += 0.5; + current_screen.onRefresh(); + return false; +} + +void StatusScreen::setStatusMessage(progmem_str pstr) { + BioPrintingDialogBox::setStatusMessage(pstr); +} + +void StatusScreen::setStatusMessage(const char * const str) { + BioPrintingDialogBox::setStatusMessage(str); +} + +void StatusScreen::onIdle() { + if (isPrintingFromMedia()) + BioPrintingDialogBox::show(); + + if (refresh_timer.elapsed(STATUS_UPDATE_INTERVAL)) { + onRefresh(); + refresh_timer.start(); + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_tune_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_tune_menu.cpp new file mode 100644 index 000000000..09aedbd33 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_tune_menu.cpp @@ -0,0 +1,87 @@ +/********************* + * bio_tune_menu.cpp * + *********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; +using namespace ExtUI; + +void TuneMenu::onRedraw(draw_mode_t what) { + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .font(font_medium); + } + + #define GRID_ROWS 8 + #define GRID_COLS 2 + + if (what & FOREGROUND) { + CommandProcessor cmd; + cmd.cmd(COLOR_RGB(bg_text_enabled)) + .font(font_large).text ( BTN_POS(1,1), BTN_SIZE(2,1), F("Print Menu")) + .colors(normal_btn) + .font(font_medium) + .enabled(!isPrinting()).tag(2).button( BTN_POS(1,2), BTN_SIZE(2,1), isPrinting() ? F("Printing...") : F("Print Again")) + .enabled( isPrinting()).tag(3).button( BTN_POS(1,3), BTN_SIZE(2,1), F("Print Speed")) + .tag(4).button( BTN_POS(1,4), BTN_SIZE(2,1), F("Bed Temperature")) + #if ENABLED(BABYSTEPPING) + .enabled(true) + #else + .enabled(false) + #endif + .tag(5).button( BTN_POS(1,5), BTN_SIZE(2,1), F("Nudge Nozzle")) + .enabled(!isPrinting()).tag(6).button( BTN_POS(1,6), BTN_SIZE(2,1), F("Load Syringe")) + .enabled(!isPrinting()).tag(7).button( BTN_POS(1,7), BTN_SIZE(2,1), F("Unlock XY Axis")) + .colors(action_btn) .tag(1).button( BTN_POS(1,8), BTN_SIZE(2,1), F("Back")); + } + #undef GRID_COLS + #undef GRID_ROWS +} + +bool TuneMenu::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_PREVIOUS(); break; + case 2: { + FileList files; + printFile(files.shortFilename()); + GOTO_PREVIOUS(); + break; + } + case 3: GOTO_SCREEN(FeedratePercentScreen); break; + case 4: GOTO_SCREEN(TemperatureScreen); break; + case 5: GOTO_SCREEN(NudgeNozzleScreen); break; + case 6: GOTO_SCREEN(BioConfirmHomeXYZ); break; + case 7: StatusScreen::unlockMotors(); break; + default: + return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/boot_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/boot_screen.cpp new file mode 100644 index 000000000..b2f65848d --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/boot_screen.cpp @@ -0,0 +1,113 @@ +/******************* + * boot_screen.cpp * + *******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +#include "../ftdi_eve_lib/extras/poly_ui.h" +#include "../archim2-flash/flash_storage.h" + +#ifdef TOUCH_UI_PORTRAIT + #include "../theme/bootscreen_logo_portrait.h" +#else + #include "../theme/bootscreen_logo_landscape.h" +#endif + +using namespace FTDI; + +void BootScreen::onRedraw(draw_mode_t) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(0x000000)); + cmd.cmd(CLEAR(true,true,true)); + + CLCD::turn_on_backlight(); + SoundPlayer::set_volume(255); +} + +void BootScreen::onIdle() { + if (CLCD::is_touching()) { + // If the user is touching the screen at startup, then + // assume the user wants to re-calibrate the screen. + // This gives the user the ability to recover a + // miscalibration that has been stored to EEPROM. + + // Also reset display parameters to defaults, just + // in case the display is borked. + InterfaceSettingsScreen::failSafeSettings(); + + GOTO_SCREEN(TouchCalibrationScreen); + current_screen.forget(); + PUSH_SCREEN(StatusScreen); + } else { + if (!UIFlashStorage::is_valid()) { + SpinnerDialogBox::show(F("Please wait...")); + UIFlashStorage::format_flash(); + SpinnerDialogBox::hide(); + } + + if (UIData::animations_enabled()) { + // If there is a startup video in the flash SPI, play + // that, otherwise show a static splash screen. + if (!MediaPlayerScreen::playBootMedia()) + showSplashScreen(); + } + #ifdef LULZBOT_USE_BIOPRINTER_UI + GOTO_SCREEN(BioConfirmHomeXYZ); + current_screen.forget(); + PUSH_SCREEN(StatusScreen); + PUSH_SCREEN(BioConfirmHomeE); + #else + GOTO_SCREEN(StatusScreen); + #endif + } +} + +void BootScreen::showSplashScreen() { + CommandProcessor cmd; + cmd.cmd(CMD_DLSTART); + cmd.cmd(CLEAR_COLOR_RGB(0xDEEA5C)); + cmd.cmd(CLEAR(true,true,true)); + + #define POLY(A) PolyUI::poly_reader_t(A, sizeof(A)/sizeof(A[0])) + + PolyUI ui(cmd); + + cmd.cmd(COLOR_RGB(0xC1D82F)); + ui.fill(POLY(logo_green)); + cmd.cmd(COLOR_RGB(0x000000)); + ui.fill(POLY(logo_black)); + ui.fill(POLY(logo_type)); + ui.fill(POLY(logo_mark)); + cmd.cmd(COLOR_RGB(0xFFFFFF)); + ui.fill(POLY(logo_white)); + + cmd.cmd(DL::DL_DISPLAY); + cmd.cmd(CMD_SWAP); + cmd.execute(); + + ExtUI::delay_ms(2500); +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/change_filament_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/change_filament_screen.cpp new file mode 100644 index 000000000..8945aeb43 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/change_filament_screen.cpp @@ -0,0 +1,323 @@ +/****************************** + * change_filament_screen.cpp * + ******************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" +#include "screen_data.h" + +using namespace ExtUI; +using namespace FTDI; +using namespace Theme; + +#define COOL_TEMP 40 +#define LOW_TEMP 180 +#define MED_TEMP 200 +#define HIGH_TEMP 220 + +/****************** COLOR SCALE ***********************/ + +uint32_t getWarmColor(uint16_t temp, uint16_t cool, uint16_t low, uint16_t med, uint16_t high) { + rgb_t R0, R1, mix; + + float t; + if (temp < cool) { + R0 = cool_rgb; + R1 = low_rgb; + t = 0; + } + else if (temp < low) { + R0 = cool_rgb; + R1 = low_rgb; + t = (float(temp)-cool)/(low-cool); + } + else if (temp < med) { + R0 = low_rgb; + R1 = med_rgb; + t = (float(temp)-low)/(med-low); + } + else if (temp < high) { + R0 = med_rgb; + R1 = high_rgb; + t = (float(temp)-med)/(high-med); + } + else if (temp >= high) { + R0 = med_rgb; + R1 = high_rgb; + t = 1; + } + rgb_t::lerp(t, R0, R1, mix); + return mix; +} + +void ChangeFilamentScreen::drawTempGradient(uint16_t x, uint16_t y, uint16_t w, uint16_t h) { + CommandProcessor cmd; + cmd.cmd(SCISSOR_XY (x, y)) + .cmd(SCISSOR_SIZE (w, h/2)) + .gradient (x, y, high_rgb, x, y+h/2, med_rgb) + .cmd(SCISSOR_XY (x, y+h/2)) + .cmd(SCISSOR_SIZE (w, h/2)) + .gradient (x, y+h/2, med_rgb, x, y+h, low_rgb) + .cmd(SCISSOR_XY ()) + .cmd(SCISSOR_SIZE ()); +} + +void ChangeFilamentScreen::onEntry() { + screen_data.ChangeFilamentScreen.e_tag = ExtUI::getActiveTool() + 10; + screen_data.ChangeFilamentScreen.t_tag = 0; + screen_data.ChangeFilamentScreen.repeat_tag = 0; + screen_data.ChangeFilamentScreen.saved_extruder = getActiveTool(); +} + +void ChangeFilamentScreen::onExit() { + setActiveTool(screen_data.ChangeFilamentScreen.saved_extruder, true); +} + +void ChangeFilamentScreen::onRedraw(draw_mode_t what) { + CommandProcessor cmd; + + #ifdef TOUCH_UI_PORTRAIT + #define GRID_COLS 2 + #define GRID_ROWS 11 + #else + #define GRID_COLS 4 + #define GRID_ROWS 6 + #endif + + if (what & BACKGROUND) { + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .tag(0) + #ifdef TOUCH_UI_PORTRAIT + .font(font_large) + #else + .font(font_medium) + #endif + .text(BTN_POS(1,1), BTN_SIZE(2,1), F("Extruder Selection:")) + #ifdef TOUCH_UI_PORTRAIT + .text(BTN_POS(1,7), BTN_SIZE(1,1), F("Current Temp:")) + #else + .text(BTN_POS(3,1), BTN_SIZE(2,1), F("Current Temp:")) + .font(font_small) + #endif + .text(BTN_POS(1,3), BTN_SIZE(2,1), F("Removal Temp:")); + drawTempGradient(BTN_POS(1,4), BTN_SIZE(1,3)); + } + + if (what & FOREGROUND) { + char e_str[15]; + + const char *idle = PSTR("%-3d C / idle"); + const char *not_idle = PSTR("%-3d / %-3d C"); + + sprintf_P( + e_str, + isHeaterIdle(getExtruder()) ? idle : not_idle, + ROUND(getActualTemp_celsius(getExtruder())), + ROUND(getTargetTemp_celsius(getExtruder())) + ); + + const rgb_t tcol = getWarmColor(getActualTemp_celsius(getExtruder()), COOL_TEMP, LOW_TEMP, MED_TEMP, HIGH_TEMP); + cmd.cmd(COLOR_RGB(tcol)) + .tag(15) + #ifdef TOUCH_UI_PORTRAIT + .rectangle(BTN_POS(2,7), BTN_SIZE(1,1)) + #else + .rectangle(BTN_POS(3,2), BTN_SIZE(2,1)) + #endif + .cmd(COLOR_RGB(tcol.luminance() > 128 ? 0x000000 : 0xFFFFFF)) + .font(font_medium) + #ifdef TOUCH_UI_PORTRAIT + .text(BTN_POS(2,7), BTN_SIZE(1,1), e_str) + #else + .text(BTN_POS(3,2), BTN_SIZE(2,1), e_str) + #endif + .colors(normal_btn); + + const bool t_ok = getActualTemp_celsius(getExtruder()) > getSoftenTemp() - 10; + + if (screen_data.ChangeFilamentScreen.t_tag && !t_ok) { + cmd.text(BTN_POS(1,6), BTN_SIZE(1,1), F("Heating...")); + } else if (getActualTemp_celsius(getExtruder()) > 100) { + cmd.cmd(COLOR_RGB(0xFF0000)) + .text(BTN_POS(1,4), BTN_SIZE(1,1), F("Caution:")) + .colors(normal_btn) + .text(BTN_POS(1,6), BTN_SIZE(1,1), F("Hot!")); + } + + #define TOG_STYLE(A) colors(A ? action_btn : normal_btn) + + const bool tog2 = screen_data.ChangeFilamentScreen.t_tag == 2; + const bool tog3 = screen_data.ChangeFilamentScreen.t_tag == 3; + const bool tog4 = screen_data.ChangeFilamentScreen.t_tag == 4; + const bool tog10 = screen_data.ChangeFilamentScreen.e_tag == 10; + #if HOTENDS > 1 + const bool tog11 = screen_data.ChangeFilamentScreen.e_tag == 11; + #endif + + #ifdef TOUCH_UI_PORTRAIT + cmd.font(font_large) + #else + cmd.font(font_medium) + #endif + .TOG_STYLE(tog10) + .tag(10) .button (BTN_POS(1,2), BTN_SIZE(1,1), F("1")) + #if HOTENDS < 2 + .enabled(false) + #else + .TOG_STYLE(tog11) + #endif + .tag(11) .button (BTN_POS(2,2), BTN_SIZE(1,1), F("2")); + + if (!t_ok) reset_menu_timeout(); + + const bool tog7 = screen_data.ChangeFilamentScreen.repeat_tag == 7; + const bool tog8 = screen_data.ChangeFilamentScreen.repeat_tag == 8; + + #ifdef TOUCH_UI_PORTRAIT + cmd.font(font_large) + #else + cmd.font(font_small) + #endif + .tag(2) .TOG_STYLE(tog2) .button (BTN_POS(2,6), BTN_SIZE(1,1), F( STRINGIFY(LOW_TEMP) "C (PLA)")) + .tag(3) .TOG_STYLE(tog3) .button (BTN_POS(2,5), BTN_SIZE(1,1), F( STRINGIFY(MED_TEMP) "C (ABS)")) + .tag(4) .TOG_STYLE(tog4) .button (BTN_POS(2,4), BTN_SIZE(1,1), F( STRINGIFY(HIGH_TEMP) "C (High)")) + .colors(normal_btn) + + // Add tags to color gradient + .cmd(COLOR_MASK(0,0,0,0)) + .tag(2) .rectangle(BTN_POS(1,6), BTN_SIZE(1,1)) + .tag(3) .rectangle(BTN_POS(1,5), BTN_SIZE(1,1)) + .tag(4) .rectangle(BTN_POS(1,4), BTN_SIZE(1,1)) + .cmd(COLOR_MASK(1,1,1,1)) + + .cmd(COLOR_RGB(t_ok ? bg_text_enabled : bg_text_disabled)) + #ifdef TOUCH_UI_PORTRAIT + .font(font_large) + .tag(0) .text (BTN_POS(1,8), BTN_SIZE(1,1), F("Unload")) + .text (BTN_POS(2,8), BTN_SIZE(1,1), F("Load/Extrude")) + .tag(5) .enabled(t_ok).button (BTN_POS(1,9), BTN_SIZE(1,1), F("Momentary")) + .tag(6) .enabled(t_ok).button (BTN_POS(2,9), BTN_SIZE(1,1), F("Momentary")) + .tag(7).TOG_STYLE(tog7).enabled(t_ok).button (BTN_POS(1,10), BTN_SIZE(1,1), F("Continuous")) + .tag(8).TOG_STYLE(tog8).enabled(t_ok).button (BTN_POS(2,10), BTN_SIZE(1,1), F("Continuous")) + .tag(1).colors(action_btn) .button (BTN_POS(1,11), BTN_SIZE(2,1), F("Back")); + #else + .font(font_small) + .tag(0) .text (BTN_POS(3,3), BTN_SIZE(1,1), F("Unload")) + .text (BTN_POS(4,3), BTN_SIZE(1,1), F("Load/Extrude")) + .tag(5) .enabled(t_ok).button (BTN_POS(3,4), BTN_SIZE(1,1), F("Momentary")) + .tag(6) .enabled(t_ok).button (BTN_POS(4,4), BTN_SIZE(1,1), F("Momentary")) + .tag(7).TOG_STYLE(tog7).enabled(t_ok).button (BTN_POS(3,5), BTN_SIZE(1,1), F("Continuous")) + .tag(8).TOG_STYLE(tog8).enabled(t_ok).button (BTN_POS(4,5), BTN_SIZE(1,1), F("Continuous")) + .font(font_medium) + .tag(1).colors(action_btn) .button (BTN_POS(3,6), BTN_SIZE(2,1), F("Back")); + #endif + } + #undef GRID_COLS + #undef GRID_ROWS +} + +uint8_t ChangeFilamentScreen::getSoftenTemp() { + switch (screen_data.ChangeFilamentScreen.t_tag) { + case 2: return LOW_TEMP; + case 3: return MED_TEMP; + case 4: return HIGH_TEMP; + default: return EXTRUDE_MINTEMP; + } +} + +ExtUI::extruder_t ChangeFilamentScreen::getExtruder() { + switch (screen_data.ChangeFilamentScreen.e_tag) { + case 13: return ExtUI::E3; + case 12: return ExtUI::E2; + case 11: return ExtUI::E1; + default: return ExtUI::E0; + } +} + +bool ChangeFilamentScreen::onTouchStart(uint8_t tag) { + // Make the Momentary and Continuous buttons slightly more responsive + switch (tag) { + case 5: case 6: case 7: case 8: + return ChangeFilamentScreen::onTouchHeld(tag); + default: + return false; + } +} + +bool ChangeFilamentScreen::onTouchEnd(uint8_t tag) { + using namespace ExtUI; + switch (tag) { + case 1: GOTO_PREVIOUS(); break; + case 2: + case 3: + case 4: + // Change temperature + screen_data.ChangeFilamentScreen.t_tag = tag; + setTargetTemp_celsius(getSoftenTemp(), getExtruder()); + break; + case 7: + screen_data.ChangeFilamentScreen.repeat_tag = (screen_data.ChangeFilamentScreen.repeat_tag == 7) ? 0 : 7; + break; + case 8: + screen_data.ChangeFilamentScreen.repeat_tag = (screen_data.ChangeFilamentScreen.repeat_tag == 8) ? 0 : 8; + break; + case 10: + case 11: + // Change extruder + screen_data.ChangeFilamentScreen.e_tag = tag; + screen_data.ChangeFilamentScreen.t_tag = 0; + screen_data.ChangeFilamentScreen.repeat_tag = 0; + setActiveTool(getExtruder(), true); + break; + case 15: GOTO_SCREEN(TemperatureScreen); break; + } + return true; +} + +bool ChangeFilamentScreen::onTouchHeld(uint8_t tag) { + if (ExtUI::isMoving()) return false; // Don't allow moves to accumulate + constexpr float increment = 1; + #define UI_INCREMENT_AXIS(axis) MoveAxisScreen::setManualFeedrate(axis, increment); UI_INCREMENT(AxisPosition_mm, axis); + #define UI_DECREMENT_AXIS(axis) MoveAxisScreen::setManualFeedrate(axis, increment); UI_DECREMENT(AxisPosition_mm, axis); + switch (tag) { + case 5: case 7: UI_DECREMENT_AXIS(getExtruder()); break; + case 6: case 8: UI_INCREMENT_AXIS(getExtruder()); break; + default: return false; + } + #undef UI_DECREMENT_AXIS + #undef UI_INCREMENT_AXIS + return false; +} + +void ChangeFilamentScreen::onIdle() { + if (screen_data.ChangeFilamentScreen.repeat_tag) onTouchHeld(screen_data.ChangeFilamentScreen.repeat_tag); + if (refresh_timer.elapsed(STATUS_UPDATE_INTERVAL)) { + onRefresh(); + refresh_timer.start(); + } + BaseScreen::onIdle(); +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_abort_print_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_abort_print_dialog_box.cpp new file mode 100644 index 000000000..77d4fcfac --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_abort_print_dialog_box.cpp @@ -0,0 +1,47 @@ +/************************************** + * confirm_abort_print_dialog_box.cpp * + **************************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace ExtUI; + +void ConfirmAbortPrintDialogBox::onRedraw(draw_mode_t) { + drawMessage(F("Are you sure you want to cancel the print?")); + drawYesNoButtons(); +} + +bool ConfirmAbortPrintDialogBox::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: + GOTO_PREVIOUS(); + stopPrint(); + return true; + default: + return DialogBoxBaseClass::onTouchEnd(tag); + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_auto_calibration_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_auto_calibration_dialog_box.cpp new file mode 100644 index 000000000..f367918f5 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_auto_calibration_dialog_box.cpp @@ -0,0 +1,48 @@ +/******************************************* + * confirm_auto_calibration_dialog_box.cpp * + *******************************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(CALIBRATION_GCODE) + +#include "screens.h" + +using namespace ExtUI; +using namespace Theme; + +void ConfirmAutoCalibrationDialogBox::onRedraw(draw_mode_t) { + drawMessage(F("For best results, unload the filament and clean the hotend prior to starting calibration. Continue?")); + drawYesNoButtons(); +} + +bool ConfirmAutoCalibrationDialogBox::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: + GOTO_SCREEN(StatusScreen); + injectCommands_P(PSTR(LULZBOT_CALIBRATION_COMMANDS)); + return true; + default: + return DialogBoxBaseClass::onTouchEnd(tag); + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_erase_flash_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_erase_flash_dialog_box.cpp new file mode 100644 index 000000000..2da592fe3 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_erase_flash_dialog_box.cpp @@ -0,0 +1,54 @@ +/************************************** + * confirm_erase_flash_dialog_box.cpp * + **************************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS) + +#include "screens.h" + +#include "../archim2-flash/flash_storage.h" + +using namespace FTDI; + +void ConfirmEraseFlashDialogBox::onRedraw(draw_mode_t) { + drawMessage(F("Are you sure? SPI flash will be erased.")); + drawYesNoButtons(); +} + +bool ConfirmEraseFlashDialogBox::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: + SpinnerDialogBox::show(F("Erasing...")); + UIFlashStorage::format_flash(); + SpinnerDialogBox::hide(); + AlertDialogBox::show(F("SPI flash erased")); + // Remove ConfirmEraseFlashDialogBox from the stack + // so the alert box doesn't return to me. + current_screen.forget(); + return true; + default: + return DialogBoxBaseClass::onTouchEnd(tag); + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_user_request_alert_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_user_request_alert_box.cpp new file mode 100644 index 000000000..82f92de21 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_user_request_alert_box.cpp @@ -0,0 +1,58 @@ +/************************************** + * confirm_user_request_alert_box.cpp * + **************************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" +#include "screen_data.h" + +using namespace FTDI; + +void ConfirmUserRequestAlertBox::onRedraw(draw_mode_t mode) { + AlertDialogBox::onRedraw(mode); // Required for the GOTO_SCREEN function to work +} + +bool ConfirmUserRequestAlertBox::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: + ExtUI::setUserConfirmed(); + GOTO_PREVIOUS(); + return true; + case 2: GOTO_PREVIOUS(); return true; + default: return false; + } +} + +void ConfirmUserRequestAlertBox::show(const char* msg) { + drawMessage(msg); + storeBackground(); + screen_data.AlertDialogBox.isError = false; + GOTO_SCREEN(ConfirmUserRequestAlertBox); +} + +void ConfirmUserRequestAlertBox::hide() { + if (AT_SCREEN(ConfirmUserRequestAlertBox)) + GOTO_PREVIOUS(); +} +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/default_acceleration_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/default_acceleration_screen.cpp new file mode 100644 index 000000000..1e1cb8457 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/default_acceleration_screen.cpp @@ -0,0 +1,63 @@ +/*********************************** + * default_acceleration_screen.cpp * + ***********************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void DefaultAccelerationScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(0); + w.units(PSTR("mm/s^2")); + w.heading( PSTR("Default Acceleration")); + w.color(other); + w.adjuster( 2, PSTR("Printing:"), getPrintingAcceleration_mm_s2() ); + w.adjuster( 4, PSTR("Travel:"), getTravelAcceleration_mm_s2() ); + w.adjuster( 6, PSTR("Retraction:"), getRetractAcceleration_mm_s2() ); + w.increments(); + w.button( 8, PSTR("Set Axis Maximum")); +} + +bool DefaultAccelerationScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(PrintingAcceleration_mm_s2); break; + case 3: UI_INCREMENT(PrintingAcceleration_mm_s2); break; + case 4: UI_DECREMENT(TravelAcceleration_mm_s2); break; + case 5: UI_INCREMENT(TravelAcceleration_mm_s2); break; + case 6: UI_DECREMENT(RetractAcceleration_mm_s2); break; + case 7: UI_INCREMENT(RetractAcceleration_mm_s2); break; + case 8: GOTO_SCREEN(MaxAccelerationScreen); break; + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/developer_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/developer_menu.cpp new file mode 100644 index 000000000..9bec9bf55 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/developer_menu.cpp @@ -0,0 +1,150 @@ +/********************** + * developer_menu.cpp * + **********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS) + +#include "screens.h" + +#include "../archim2-flash/flash_storage.h" + +using namespace FTDI; +using namespace Theme; + +void DeveloperMenu::onRedraw(draw_mode_t what) { + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .font(font_medium) + .tag(0); + + #ifdef SPI_FLASH_SS + constexpr bool has_flash = true; + #else + constexpr bool has_flash = false; + #endif + + #if ENABLED(SDSUPPORT) + constexpr bool has_media = true; + #else + constexpr bool has_media = false; + #endif + + cmd.cmd(COLOR_RGB(bg_text_enabled)); + #ifdef TOUCH_UI_PORTRAIT + #define GRID_ROWS 10 + #define GRID_COLS 1 + cmd.font(font_large) .text ( BTN_POS(1,1), BTN_SIZE(1,1), F("Developer Menu")) + .colors(normal_btn) + .tag(2).font(font_medium) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("Show All Widgets")) + .tag(3) .button( BTN_POS(1,3), BTN_SIZE(1,1), F("Stress Test")) + .tag(4) .button( BTN_POS(1,4), BTN_SIZE(1,1), F("Show Touch Registers")) + .tag(5) .button( BTN_POS(1,5), BTN_SIZE(1,1), F("Play Song")) + .tag(6).enabled(has_media).button( BTN_POS(1,6), BTN_SIZE(1,1), F("Play Video from Media")) + .tag(7).enabled(has_flash).button( BTN_POS(1,7), BTN_SIZE(1,1), F("Play Video from SPI Flash")) + .tag(8).enabled(has_flash).button( BTN_POS(1,8), BTN_SIZE(1,1), F("Load Video to SPI Flash")) + .tag(9).enabled(has_flash).button( BTN_POS(1,9), BTN_SIZE(1,1), F("Erase SPI Flash")) + + .tag(1).colors(action_btn) + .button( BTN_POS(1,10), BTN_SIZE(1,1), F("Back")); + #else + #define GRID_ROWS 6 + #define GRID_COLS 2 + cmd.font(font_medium) .text ( BTN_POS(1,1), BTN_SIZE(2,1), F("Developer Menu")) + .colors(normal_btn) + .tag(2).font(font_small) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("Show All Widgets")) + .tag(3) .button( BTN_POS(1,3), BTN_SIZE(1,1), F("Show Touch Registers")) + .tag(9) .button( BTN_POS(1,4), BTN_SIZE(1,1), F("Show Pin States")) + .tag(4) .button( BTN_POS(1,5), BTN_SIZE(1,1), F("Play Song")) + .tag(5).enabled(has_media).button( BTN_POS(2,2), BTN_SIZE(1,1), F("Play Video from Media")) + .tag(6).enabled(has_flash).button( BTN_POS(2,3), BTN_SIZE(1,1), F("Play Video from SPI Flash")) + .tag(7).enabled(has_flash).button( BTN_POS(2,4), BTN_SIZE(1,1), F("Load Video to SPI Flash")) + .tag(8).enabled(has_flash).button( BTN_POS(2,5), BTN_SIZE(1,1), F("Erase SPI Flash")) + .tag(1).colors(action_btn) + .button( BTN_POS(1,6), BTN_SIZE(2,1), F("Back")); + #endif + } +} + +bool DeveloperMenu::onTouchEnd(uint8_t tag) { + using namespace Theme; + switch (tag) { + case 1: GOTO_PREVIOUS(); break; + case 2: GOTO_SCREEN(WidgetsScreen); break; + case 3: + PUSH_SCREEN(StressTestScreen); + AlertDialogBox::show(F("Please do not run this test unattended as it may cause your printer to malfunction.")); + current_screen.forget(); + break; + case 4: GOTO_SCREEN(TouchRegistersScreen); break; + case 5: sound.play(js_bach_joy, PLAY_ASYNCHRONOUS); break; + #if ENABLED(SDSUPPORT) + case 6: + if (!MediaPlayerScreen::playCardMedia()) + AlertDialogBox::showError(F("Cannot open STARTUP.AVI")); + break; + #endif + #ifdef SPI_FLASH_SS + case 7: + if (!MediaPlayerScreen::playBootMedia()) + AlertDialogBox::showError(F("No boot media available")); + break; + case 8: + { + SpinnerDialogBox::show(F("Saving...")); + UIFlashStorage::error_t res = UIFlashStorage::write_media_file(F("STARTUP.AVI")); + SpinnerDialogBox::hide(); + reset_menu_timeout(); + switch (res) { + case UIFlashStorage::SUCCESS: + AlertDialogBox::show(F("File copied!")); + break; + + case UIFlashStorage::READ_ERROR: + AlertDialogBox::showError(F("Failed to read file")); + break; + + case UIFlashStorage::VERIFY_ERROR: + AlertDialogBox::showError(F("Failed to verify file")); + break; + + case UIFlashStorage::FILE_NOT_FOUND: + AlertDialogBox::showError(F("Cannot open STARTUP.AVI")); + break; + + case UIFlashStorage::WOULD_OVERWRITE: + AlertDialogBox::showError(F("Cannot overwrite existing media.")); + break; + } + break; + } + case 9: GOTO_SCREEN(ConfirmEraseFlashDialogBox); break; + #endif + case 10: GOTO_SCREEN(EndstopStatesScreen); break; + default: return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/dialog_box_base_class.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/dialog_box_base_class.cpp new file mode 100644 index 000000000..6178a71e9 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/dialog_box_base_class.cpp @@ -0,0 +1,83 @@ +/***************************** + * dialog_box_base_class.cpp * + *****************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; + +#define GRID_COLS 2 +#define GRID_ROWS 8 + +template +void DialogBoxBaseClass::drawMessage(const T message, int16_t font) { + CommandProcessor cmd; + cmd.cmd(CMD_DLSTART) + .cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .cmd(COLOR_RGB(bg_text_enabled)) + .tag(0); + draw_text_box(cmd, BTN_POS(1,1), BTN_SIZE(2,3), message, OPT_CENTER, font ? font : font_large); + cmd.colors(normal_btn); +} + +template void DialogBoxBaseClass::drawMessage(const char *, int16_t font); +template void DialogBoxBaseClass::drawMessage(const progmem_str, int16_t font); + +void DialogBoxBaseClass::drawYesNoButtons(uint8_t default_btn) { + CommandProcessor cmd; + cmd.font(font_medium) + .colors(default_btn == 1 ? action_btn : normal_btn).tag(1).button( BTN_POS(1,8), BTN_SIZE(1,1), F("Yes")) + .colors(default_btn == 2 ? action_btn : normal_btn).tag(2).button( BTN_POS(2,8), BTN_SIZE(1,1), F("No")); +} + +void DialogBoxBaseClass::drawOkayButton() { + CommandProcessor cmd; + cmd.font(font_medium) + .tag(1).button( BTN_POS(1,8), BTN_SIZE(2,1), F("Okay")); +} + +void DialogBoxBaseClass::drawButton(const progmem_str label) { + CommandProcessor cmd; + cmd.font(font_medium) + .tag(1).button( BTN_POS(1,8), BTN_SIZE(2,1), label); +} + +void DialogBoxBaseClass::drawSpinner() { + CommandProcessor cmd; + cmd.cmd(COLOR_RGB(bg_text_enabled)) + .spinner(BTN_POS(1,4), BTN_SIZE(2,3)).execute(); +} + +bool DialogBoxBaseClass::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_PREVIOUS(); return true; + case 2: GOTO_PREVIOUS(); return true; + default: return false; + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/display_tuning_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/display_tuning_screen.cpp new file mode 100644 index 000000000..7af436a5c --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/display_tuning_screen.cpp @@ -0,0 +1,61 @@ +/***************************** + * display_tuning_screen.cpp * + *****************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; + +void DisplayTuningScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(0, BaseNumericAdjustmentScreen::DEFAULT_LOWEST); + w.units(PSTR("")); + w.heading( PSTR("Display Tuning")); + w.color(other); + w.adjuster( 2, PSTR("H Offset:"), CLCD::mem_read_16(CLCD::REG::HOFFSET) ); + w.adjuster( 4, PSTR("V Offset:"), CLCD::mem_read_16(CLCD::REG::VOFFSET) ); + w.increments(); + w.heading( PSTR("Touch Screen")); + w.button(6, PSTR("Calibrate")); +} + +bool DisplayTuningScreen::onTouchHeld(uint8_t tag) { + #define REG_INCREMENT(a,i) CLCD::mem_write_16(CLCD::REG::a, CLCD::mem_read_16(CLCD::REG::a) + i) + const float increment = getIncrement(); + switch (tag) { + case 2: REG_INCREMENT(HOFFSET, -increment); break; + case 3: REG_INCREMENT(HOFFSET, increment); break; + case 4: REG_INCREMENT(VOFFSET, -increment); break; + case 5: REG_INCREMENT(VOFFSET, increment); break; + case 6: GOTO_SCREEN(TouchCalibrationScreen); break; + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/endstop_state_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/endstop_state_screen.cpp new file mode 100644 index 000000000..f1e13d3a9 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/endstop_state_screen.cpp @@ -0,0 +1,149 @@ +/**************************** + * endstop_state_screen.cpp * + ****************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; +using namespace ExtUI; + +void EndstopStatesScreen::onEntry() { + BaseScreen::onEntry(); +} + +void EndstopStatesScreen::onExit() { + BaseScreen::onExit(); +} + +void EndstopStatesScreen::onRedraw(draw_mode_t) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(COLOR_RGB(bg_text_enabled)) + .cmd(CLEAR(true,true,true)) + .tag(0); + + #define GRID_ROWS 7 + #define GRID_COLS 6 + + #define PIN_BTN(X,Y,PIN,LABEL) button(BTN_POS(X,Y), BTN_SIZE(2,1), F(LABEL)) + #define PIN_ENABLED(LABEL,PIN,INV,X,Y) cmd.enabled(1).colors(READ(PIN##_PIN) != INV ? action_btn : normal_btn).PIN_BTN(X,Y,PIN,LABEL); + #define PIN_DISABLED(LABEL,PIN,INV,X,Y) cmd.enabled(0).PIN_BTN(X,Y,PIN,LABEL); + + #ifdef TOUCH_UI_PORTRAIT + cmd.font(font_large) + #else + cmd.font(font_medium) + #endif + .text(BTN_POS(1,1), BTN_SIZE(6,1), F("Endstop States:")) + .font(font_tiny); + #if PIN_EXISTS(X_MAX) + PIN_ENABLED ("X Max", X_MAX,X_MAX_ENDSTOP_INVERTING,1,2) + #else + PIN_DISABLED("X Max",X_MAX,X_MAX_ENDSTOP_INVERTING,1,2) + #endif + #if PIN_EXISTS(Y_MAX) + PIN_ENABLED ("Y Max",Y_MAX,Y_MAX_ENDSTOP_INVERTING,3,2) + #else + PIN_DISABLED("Y Max",Y_MAX,Y_MAX_ENDSTOP_INVERTING,3,2) + #endif + #if PIN_EXISTS(Z_MAX) + PIN_ENABLED ("Z Max",Z_MAX,Z_MAX_ENDSTOP_INVERTING,5,2) + #else + PIN_DISABLED("Z Max",Z_MAX,Z_MAX_ENDSTOP_INVERTING,5,2) + #endif + #if PIN_EXISTS(X_MIN) + PIN_ENABLED ("X Min",X_MIN,X_MIN_ENDSTOP_INVERTING,1,3) + #else + PIN_DISABLED("X Min",X_MIN,X_MIN_ENDSTOP_INVERTING,1,3) + #endif + #if PIN_EXISTS(Y_MIN) + PIN_ENABLED ("Y Min",Y_MIN,Y_MIN_ENDSTOP_INVERTING,3,3) + #else + PIN_DISABLED("Y Min",Y_MIN,Y_MIN_ENDSTOP_INVERTING,3,3) + #endif + #if PIN_EXISTS(Z_MIN) + PIN_ENABLED ("Z Min",Z_MIN,Z_MIN_ENDSTOP_INVERTING,5,3) + #else + PIN_DISABLED("Z Min",Z_MIN,Z_MIN_ENDSTOP_INVERTING,5,3) + #endif + #if ENABLED(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FIL_RUNOUT) + PIN_ENABLED ("Runout 1",FIL_RUNOUT, FIL_RUNOUT_INVERTING,1,4) + #else + PIN_DISABLED("Runout 1",FIL_RUNOUT, FIL_RUNOUT_INVERTING,1,4) + #endif + #if ENABLED(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FIL_RUNOUT2) + PIN_ENABLED ("Runout 2",FIL_RUNOUT2,FIL_RUNOUT_INVERTING,3,4) + #else + PIN_DISABLED("Runout 2",FIL_RUNOUT2,FIL_RUNOUT_INVERTING,3,4) + #endif + #if PIN_EXISTS(Z_MIN_PROBE) + PIN_ENABLED ("Z Probe",Z_MIN_PROBE,Z_MIN_PROBE_ENDSTOP_INVERTING,5,4) + #else + PIN_DISABLED("Z Probe",Z_MIN_PROBE,Z_MIN_PROBE_ENDSTOP_INVERTING,5,4) + #endif + + #if HAS_SOFTWARE_ENDSTOPS + #undef EDGE_R + #define EDGE_R 30 + cmd.font(font_small) + .text (BTN_POS(1,5), BTN_SIZE(3,1), F("Soft Limits:"), OPT_RIGHTX | OPT_CENTERY) + .colors(ui_toggle) + .tag(2).toggle(BTN_POS(4,5), BTN_SIZE(3,1), F("off\xFFon"), getSoftEndstopState()); + #undef EDGE_R + #define EDGE_R 0 + #endif + + cmd.font(font_medium) + .colors(action_btn) + .tag(1).button( BTN_POS(1,7), BTN_SIZE(6,1), F("Back")); + #undef GRID_COLS + #undef GRID_ROWS +} + +bool EndstopStatesScreen::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_PREVIOUS(); break; + #if HAS_SOFTWARE_ENDSTOPS + case 2: setSoftEndstopState(!getSoftEndstopState()); + #endif + default: + return false; + } + return true; +} + +void EndstopStatesScreen::onIdle() { + constexpr uint32_t DIAGNOSTICS_UPDATE_INTERVAL = 100; + + if (refresh_timer.elapsed(DIAGNOSTICS_UPDATE_INTERVAL)) { + onRefresh(); + refresh_timer.start(); + reset_menu_timeout(); + } + BaseScreen::onIdle(); +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/feedrate_percent_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/feedrate_percent_screen.cpp new file mode 100644 index 000000000..e9f527ef9 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/feedrate_percent_screen.cpp @@ -0,0 +1,52 @@ +/******************************* + * feedrate_percent_screen.cpp * + *******************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; + +void FeedratePercentScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(0).units(PSTR("%")); + + w.heading(PSTR("Print Speed")); + w.adjuster(4, PSTR("Speed"), getFeedrate_percent()); + w.increments(); +} + +bool FeedratePercentScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 4: UI_DECREMENT(Feedrate_percent); break; + case 5: UI_INCREMENT(Feedrate_percent); break; + default: + return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_menu.cpp new file mode 100644 index 000000000..55280859a --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_menu.cpp @@ -0,0 +1,101 @@ +/********************* + * filament_menu.cpp * + *********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ANY(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void FilamentMenu::onRedraw(draw_mode_t what) { + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color)) + .cmd(CLEAR(true,true,true)); + } + + if (what & FOREGROUND) { + CommandProcessor cmd; + cmd.font(font_large) + #ifdef TOUCH_UI_PORTRAIT + #define GRID_ROWS 9 + #define GRID_COLS 2 + .text ( BTN_POS(1,1), BTN_SIZE(2,1), F("Filament Options:")) + .font(font_medium).colors(normal_btn) + #if ENABLED(FILAMENT_RUNOUT_SENSOR) + .enabled(1) + #else + .enabled(0) + #endif + .tag(2).button( BTN_POS(1,2), BTN_SIZE(2,1), F("Runout Sensor")) + #if ENABLED(LIN_ADVANCE) + .enabled(1) + #else + .enabled(0) + #endif + .tag(3).button( BTN_POS(1,3), BTN_SIZE(2,1), F("Linear Advance")) + .colors(action_btn) + .tag(1) .button( BTN_POS(1,9), BTN_SIZE(2,1), F("Back")); + #undef GRID_COLS + #undef GRID_ROWS + #else + #define GRID_ROWS 6 + #define GRID_COLS 3 + .text ( BTN_POS(1,1), BTN_SIZE(3,1), F("Filament Options:")) + .font(font_medium).colors(normal_btn) + #if ENABLED(FILAMENT_RUNOUT_SENSOR) + .enabled(1) + #else + .enabled(0) + #endif + .tag(2).button( BTN_POS(1,2), BTN_SIZE(3,1), F("Filament Runout")) + #if ENABLED(LIN_ADVANCE) + .enabled(1) + #else + .enabled(0) + #endif + .tag(3).button( BTN_POS(1,3), BTN_SIZE(3,1), F("Linear Advance")) + .colors(action_btn) + .tag(1) .button( BTN_POS(1,6), BTN_SIZE(3,1), F("Back")); + #endif + } +} + +bool FilamentMenu::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_PREVIOUS(); break; + #if ENABLED(FILAMENT_RUNOUT_SENSOR) + case 2: GOTO_SCREEN(FilamentRunoutScreen); break; + #endif + #if ENABLED(LIN_ADVANCE) + case 3: GOTO_SCREEN(LinearAdvanceScreen); break; + #endif + default: return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_runout_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_runout_screen.cpp new file mode 100644 index 000000000..570f83835 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_runout_screen.cpp @@ -0,0 +1,65 @@ +/****************************** + * filament_runout_screen.cpp * + ******************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(FILAMENT_RUNOUT_SENSOR) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void FilamentRunoutScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.heading( PSTR("Runout Detection:")); + w.toggle( 2, PSTR("Filament Sensor:"), PSTR("off\xFFon"), getFilamentRunoutEnabled()); + + #ifdef FILAMENT_RUNOUT_DISTANCE_MM + w.heading(PSTR("Detection Threshold:")); + w.units(PSTR("mm")); + w.precision(0); + w.color(e_axis); + w.adjuster( 10, PSTR("Distance:"), getFilamentRunoutDistance_mm(), getFilamentRunoutEnabled()); + w.increments(); + #endif +} + +bool FilamentRunoutScreen::onTouchHeld(uint8_t tag) { + using namespace ExtUI; + const float increment = getIncrement(); + switch (tag) { + case 2: setFilamentRunoutEnabled(!getFilamentRunoutEnabled()); break; + #ifdef FILAMENT_RUNOUT_DISTANCE_MM + case 10: UI_DECREMENT(FilamentRunoutDistance_mm); break; + case 11: UI_INCREMENT(FilamentRunoutDistance_mm); break; + #endif + default: + return false; + } + + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/files_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/files_screen.cpp new file mode 100644 index 000000000..e8aaf36ff --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/files_screen.cpp @@ -0,0 +1,264 @@ +/******************** + * files_screen.cpp * + ********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" +#include "screen_data.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void FilesScreen::onEntry() { + screen_data.FilesScreen.cur_page = 0; + screen_data.FilesScreen.selected_tag = 0xFF; + #if ENABLED(SCROLL_LONG_FILENAMES) && (FTDI_API_LEVEL >= 810) + CLCD::mem_write_32(CLCD::REG::MACRO_0,DL::NOP); + #endif + gotoPage(0); + BaseScreen::onEntry(); +} + +const char *FilesScreen::getSelectedShortFilename() { + FileList files; + files.seek(getFileForTag(screen_data.FilesScreen.selected_tag), true); + return files.shortFilename(); +} + +const char *FilesScreen::getSelectedLongFilename() { + FileList files; + files.seek(getFileForTag(screen_data.FilesScreen.selected_tag), true); + return files.longFilename(); +} + +void FilesScreen::drawSelectedFile() { + FileList files; + files.seek(getFileForTag(screen_data.FilesScreen.selected_tag), true); + screen_data.FilesScreen.flags.is_dir = files.isDir(); + drawFileButton( + files.filename(), + screen_data.FilesScreen.selected_tag, + screen_data.FilesScreen.flags.is_dir, + true + ); +} + +uint16_t FilesScreen::getFileForTag(uint8_t tag) { + return screen_data.FilesScreen.cur_page * files_per_page + tag - 2; +} + +#ifdef TOUCH_UI_PORTRAIT + #define GRID_COLS 6 + #define GRID_ROWS (files_per_page + header_h + footer_h) +#else + #define GRID_COLS 6 + #define GRID_ROWS (files_per_page + header_h + footer_h) +#endif + +void FilesScreen::drawFileButton(const char* filename, uint8_t tag, bool is_dir, bool is_highlighted) { + const uint8_t line = getLineForTag(tag)+1; + CommandProcessor cmd; + cmd.tag(tag); + cmd.cmd(COLOR_RGB(is_highlighted ? fg_action : bg_color)); + cmd.font(font_medium) + .rectangle( 0, BTN_Y(header_h+line), display_width, BTN_H(1)); + cmd.cmd(COLOR_RGB(is_highlighted ? normal_btn.rgb : bg_text_enabled)); + #if ENABLED(SCROLL_LONG_FILENAMES) + if (is_highlighted) { + cmd.cmd(SAVE_CONTEXT()); + cmd.cmd(MACRO(0)); + } + #endif + cmd.text (BTN_POS(1,header_h+line), BTN_SIZE(6,1), filename, OPT_CENTERY); + if (is_dir) { + cmd.text(BTN_POS(1,header_h+line), BTN_SIZE(6,1), F("> "), OPT_CENTERY | OPT_RIGHTX); + } + #if ENABLED(SCROLL_LONG_FILENAMES) + if (is_highlighted) { + cmd.cmd(RESTORE_CONTEXT()); + } + #endif +} + +void FilesScreen::drawFileList() { + FileList files; + screen_data.FilesScreen.num_page = max(1,(ceil)(float(files.count()) / files_per_page)); + screen_data.FilesScreen.cur_page = min(screen_data.FilesScreen.cur_page, screen_data.FilesScreen.num_page-1); + screen_data.FilesScreen.flags.is_root = files.isAtRootDir(); + + #undef MARGIN_T + #undef MARGIN_B + #define MARGIN_T 0 + #define MARGIN_B 0 + uint16_t fileIndex = screen_data.FilesScreen.cur_page * files_per_page; + for(uint8_t i = 0; i < files_per_page; i++, fileIndex++) { + if (files.seek(fileIndex)) { + drawFileButton(files.filename(), getTagForLine(i), files.isDir(), false); + } else { + break; + } + } +} + +void FilesScreen::drawHeader() { + const bool prev_enabled = screen_data.FilesScreen.cur_page > 0; + const bool next_enabled = screen_data.FilesScreen.cur_page < (screen_data.FilesScreen.num_page - 1); + + #undef MARGIN_T + #undef MARGIN_B + #define MARGIN_T 0 + #define MARGIN_B 2 + + char str[16]; + sprintf_P(str, PSTR("Page %d of %d"), + screen_data.FilesScreen.cur_page + 1, screen_data.FilesScreen.num_page); + + + CommandProcessor cmd; + cmd.colors(normal_btn) + .font(font_small) + .tag(0).button( BTN_POS(2,1), BTN_SIZE(4,header_h), str, OPT_CENTER | OPT_FLAT) + .font(font_medium) + .colors(action_btn) + .tag(241).enabled(prev_enabled).button( BTN_POS(1,1), BTN_SIZE(1,header_h), F("<")) + .tag(242).enabled(next_enabled).button( BTN_POS(6,1), BTN_SIZE(1,header_h), F(">")); +} + +void FilesScreen::drawFooter() { + #undef MARGIN_T + #undef MARGIN_B + #ifdef TOUCH_UI_PORTRAIT + #define MARGIN_T 15 + #define MARGIN_B 5 + #else + #define MARGIN_T 5 + #define MARGIN_B 5 + #endif + const bool has_selection = screen_data.FilesScreen.selected_tag != 0xFF; + const uint8_t back_tag = screen_data.FilesScreen.flags.is_root ? 240 : 245; + const uint8_t y = GRID_ROWS - footer_h + 1; + const uint8_t h = footer_h; + + CommandProcessor cmd; + cmd.colors(normal_btn) + .font(font_medium) + .colors(has_selection ? normal_btn : action_btn) + .tag(back_tag).button( BTN_POS(4,y), BTN_SIZE(3,h), F("Back")) + .enabled(has_selection) + .colors(has_selection ? action_btn : normal_btn); + if (screen_data.FilesScreen.flags.is_dir) { + cmd.tag(244).button( BTN_POS(1, y), BTN_SIZE(3,h), F("Open")); + } else { + cmd.tag(243).button( BTN_POS(1, y), BTN_SIZE(3,h), F("Print")); + } +} + +void FilesScreen::onRedraw(draw_mode_t what) { + if (what & FOREGROUND) { + drawHeader(); + drawSelectedFile(); + drawFooter(); + } +} + +void FilesScreen::gotoPage(uint8_t page) { + screen_data.FilesScreen.selected_tag = 0xFF; + screen_data.FilesScreen.cur_page = page; + CommandProcessor cmd; + cmd.cmd(CMD_DLSTART) + .cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .colors(normal_btn); + drawFileList(); + storeBackground(); +} + +bool FilesScreen::onTouchEnd(uint8_t tag) { + switch (tag) { + case 240: GOTO_PREVIOUS(); return true; + case 241: + if (screen_data.FilesScreen.cur_page > 0) { + gotoPage(screen_data.FilesScreen.cur_page-1); + } + break; + case 242: + if (screen_data.FilesScreen.cur_page < (screen_data.FilesScreen.num_page-1)) { + gotoPage(screen_data.FilesScreen.cur_page+1); + } + break; + case 243: + printFile(getSelectedShortFilename()); + StatusScreen::setStatusMessage(F("Print Starting")); + GOTO_SCREEN(StatusScreen); + return true; + case 244: + { + FileList files; + files.changeDir(getSelectedShortFilename()); + gotoPage(0); + } + break; + case 245: + { + FileList files; + files.upDir(); + gotoPage(0); + } + break; + default: + if (tag < 240) { + screen_data.FilesScreen.selected_tag = tag; + #if ENABLED(SCROLL_LONG_FILENAMES) && (FTDI_API_LEVEL >= 810) + if (FTDI::ftdi_chip >= 810) { + const char *longFilename = getSelectedLongFilename(); + if (longFilename[0]) { + CLCD::FontMetrics fm(font_medium); + uint16_t text_width = fm.get_text_width(longFilename); + screen_data.FilesScreen.scroll_pos = 0; + if (text_width > display_width) + screen_data.FilesScreen.scroll_max = text_width - display_width + MARGIN_L + MARGIN_R; + else + screen_data.FilesScreen.scroll_max = 0; + } + } + #endif + } + break; + } + return true; +} + +void FilesScreen::onIdle() { + #if ENABLED(SCROLL_LONG_FILENAMES) && (FTDI_API_LEVEL >= 810) + if (FTDI::ftdi_chip >= 810) { + CLCD::mem_write_32(CLCD::REG::MACRO_0, + VERTEX_TRANSLATE_X(-int32_t(screen_data.FilesScreen.scroll_pos))); + if (screen_data.FilesScreen.scroll_pos < screen_data.FilesScreen.scroll_max * 16) + screen_data.FilesScreen.scroll_pos++; + } + #endif +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_settings_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_settings_screen.cpp new file mode 100644 index 000000000..265d0e103 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_settings_screen.cpp @@ -0,0 +1,285 @@ +/********************************* + * interface_settings_screen.cpp * + *********************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" +#include "screen_data.h" + +#include "../archim2-flash/flash_storage.h" + +#include "../../../../../module/configuration_store.h" + +#if ENABLED(LULZBOT_PRINTCOUNTER) + #include "../../../../../module/printcounter.h" +#endif + +bool restoreEEPROM(); + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +constexpr bool PERSISTENT_STORE_SUCCESS = false; // persistentStore uses true for error + +void InterfaceSettingsScreen::onStartup() { +} + +void InterfaceSettingsScreen::onEntry() { + screen_data.InterfaceSettingsScreen.brightness = CLCD::get_brightness(); + screen_data.InterfaceSettingsScreen.volume = SoundPlayer::get_volume(); + BaseScreen::onEntry(); +} + +void InterfaceSettingsScreen::onRedraw(draw_mode_t what) { + CommandProcessor cmd; + + if (what & BACKGROUND) { + + #define GRID_COLS 4 + #ifdef TOUCH_UI_PORTRAIT + #define GRID_ROWS 7 + #else + #define GRID_ROWS 6 + #endif + + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .cmd(COLOR_RGB(bg_text_enabled)) + .tag(0) + .font(font_medium) + .text(BTN_POS(1,1), BTN_SIZE(4,1), F("Interface Settings")) + #undef EDGE_R + #define EDGE_R 30 + .font(font_small) + .tag(0) + .text(BTN_POS(1,2), BTN_SIZE(2,1), F("LCD brightness:"), OPT_RIGHTX | OPT_CENTERY) + .text(BTN_POS(1,3), BTN_SIZE(2,1), F("Sound volume:"), OPT_RIGHTX | OPT_CENTERY) + .text(BTN_POS(1,4), BTN_SIZE(2,1), F("Screen lock:"), OPT_RIGHTX | OPT_CENTERY); + cmd.text(BTN_POS(1,5), BTN_SIZE(2,1), F("Boot screen:"), OPT_RIGHTX | OPT_CENTERY); + #undef EDGE_R + } + + if (what & FOREGROUND) { + #ifdef TOUCH_UI_PORTRAIT + constexpr uint8_t w = 2; + #else + constexpr uint8_t w = 1; + #endif + + cmd.font(font_medium) + #define EDGE_R 30 + .colors(ui_slider) + .tag(2).slider(BTN_POS(3,2), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.brightness, 128) + .tag(3).slider(BTN_POS(3,3), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.volume, 0xFF) + .colors(ui_toggle) + .tag(4).toggle(BTN_POS(3,4), BTN_SIZE(w,1), F("off\xFFon"), LockScreen::is_enabled()) + .tag(5).toggle(BTN_POS(3,5), BTN_SIZE(w,1), F("off\xFFon"), UIData::animations_enabled()) + #undef EDGE_R + #define EDGE_R 0 + #ifdef TOUCH_UI_PORTRAIT + .colors(normal_btn) + .tag(6).button (BTN_POS(1,6), BTN_SIZE(4,1), F("Customize Sounds")) + .colors(action_btn) + .tag(1).button (BTN_POS(1,7), BTN_SIZE(4,1), F("Back")); + #else + .tag(6).button (BTN_POS(1,6), BTN_SIZE(2,1), F("Customize Sounds")) + .colors(action_btn) + .tag(1).button (BTN_POS(3,6), BTN_SIZE(2,1), F("Back")); + #endif + } +} + +bool InterfaceSettingsScreen::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_PREVIOUS(); return true; + case 4: + if (!LockScreen::is_enabled()) + LockScreen::enable(); + else + LockScreen::disable(); + break; + case 5: UIData::enable_animations(!UIData::animations_enabled());; break; + case 6: GOTO_SCREEN(InterfaceSoundsScreen); return true; + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +bool InterfaceSettingsScreen::onTouchStart(uint8_t tag) { + #undef EDGE_R + #define EDGE_R 30 + CommandProcessor cmd; + switch (tag) { + case 2: cmd.track_linear(BTN_POS(3,3), BTN_SIZE(2,1), 2).execute(); break; + case 3: cmd.track_linear(BTN_POS(3,4), BTN_SIZE(2,1), 3).execute(); break; + default: break; + } + #undef EDGE_R + #define EDGE_R 0 + #undef GRID_COLS + #undef GRID_ROWS + return true; +} + +void InterfaceSettingsScreen::onIdle() { + if (refresh_timer.elapsed(TOUCH_UPDATE_INTERVAL)) { + refresh_timer.start(); + + uint16_t value; + CommandProcessor cmd; + switch (cmd.track_tag(value)) { + case 2: + screen_data.InterfaceSettingsScreen.brightness = float(value) * 128 / 0xFFFF; + CLCD::set_brightness(screen_data.InterfaceSettingsScreen.brightness); + SaveSettingsDialogBox::settingsChanged(); + break; + case 3: + screen_data.InterfaceSettingsScreen.volume = value >> 8; + SoundPlayer::set_volume(screen_data.InterfaceSettingsScreen.volume); + SaveSettingsDialogBox::settingsChanged(); + break; + default: + return; + } + onRefresh(); + } + BaseScreen::onIdle(); +} + +void InterfaceSettingsScreen::failSafeSettings() { + // Reset settings that may make the printer interface + // unusable. + CLCD::mem_write_32(CLCD::REG::ROTATE, 0); + CLCD::default_touch_transform(); + CLCD::default_display_orientation(); + CLCD::set_brightness(255); + UIData::reset_persistent_data(); + CLCD::mem_write_16(CLCD::REG::HOFFSET, FTDI::Hoffset); + CLCD::mem_write_16(CLCD::REG::VOFFSET, FTDI::Voffset); +} + +void InterfaceSettingsScreen::defaultSettings() { + LockScreen::passcode = 0; + SoundPlayer::set_volume(255); + CLCD::set_brightness(255); + UIData::reset_persistent_data(); + InterfaceSoundsScreen::defaultSettings(); + CLCD::mem_write_16(CLCD::REG::HOFFSET, FTDI::Hoffset); + CLCD::mem_write_16(CLCD::REG::VOFFSET, FTDI::Voffset); +} + +void InterfaceSettingsScreen::saveSettings(char *buff) { + static_assert( + ExtUI::eeprom_data_size >= sizeof(persistent_data_t), + "Insufficient space in EEPROM for UI parameters" + ); + + SERIAL_ECHOLNPGM("Writing setting to EEPROM"); + + persistent_data_t eeprom; + + eeprom.passcode = LockScreen::passcode; + eeprom.sound_volume = SoundPlayer::get_volume(); + eeprom.display_brightness = CLCD::get_brightness(); + eeprom.bit_flags = UIData::get_persistent_data(); + eeprom.touch_transform_a = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_A); + eeprom.touch_transform_b = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_B); + eeprom.touch_transform_c = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_C); + eeprom.touch_transform_d = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_D); + eeprom.touch_transform_e = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_E); + eeprom.touch_transform_f = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_F); + eeprom.display_h_offset_adj = CLCD::mem_read_16(CLCD::REG::HOFFSET) - FTDI::Hoffset; + eeprom.display_v_offset_adj = CLCD::mem_read_16(CLCD::REG::VOFFSET) - FTDI::Voffset; + for(uint8_t i = 0; i < InterfaceSoundsScreen::NUM_EVENTS; i++) + eeprom.event_sounds[i] = InterfaceSoundsScreen::event_sounds[i]; + + memcpy(buff, &eeprom, sizeof(eeprom)); +} + +void InterfaceSettingsScreen::loadSettings(const char *buff) { + static_assert( + ExtUI::eeprom_data_size >= sizeof(persistent_data_t), + "Insufficient space in EEPROM for UI parameters" + ); + + persistent_data_t eeprom; + memcpy(&eeprom, buff, sizeof(eeprom)); + + SERIAL_ECHOLNPGM("Loading setting from EEPROM"); + + LockScreen::passcode = eeprom.passcode; + SoundPlayer::set_volume(eeprom.sound_volume); + UIData::set_persistent_data(eeprom.bit_flags); + CLCD::set_brightness(eeprom.display_brightness); + CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_A, eeprom.touch_transform_a); + CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_B, eeprom.touch_transform_b); + CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_C, eeprom.touch_transform_c); + CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_D, eeprom.touch_transform_d); + CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_E, eeprom.touch_transform_e); + CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_F, eeprom.touch_transform_f); + CLCD::mem_write_16(CLCD::REG::HOFFSET, eeprom.display_h_offset_adj + FTDI::Hoffset); + CLCD::mem_write_16(CLCD::REG::VOFFSET, eeprom.display_v_offset_adj + FTDI::Voffset); + for(uint8_t i = 0; i < InterfaceSoundsScreen::NUM_EVENTS; i++) + InterfaceSoundsScreen::event_sounds[i] = eeprom.event_sounds[i]; + + #if ENABLED(DEVELOPER_SCREENS) + StressTestScreen::startupCheck(); + #endif +} + +#ifdef LULZBOT_EEPROM_BACKUP_SIZE + #include "../../../../../HAL/shared/persistent_store_api.h" + + bool restoreEEPROM() { + uint8_t data[LULZBOT_EEPROM_BACKUP_SIZE]; + + bool success = UIFlashStorage::read_config_data(data, LULZBOT_EEPROM_BACKUP_SIZE); + + if (success) + success = persistentStore.write_data(0, data, LULZBOT_EEPROM_BACKUP_SIZE) == PERSISTENT_STORE_SUCCESS; + + if (success) + StatusScreen::setStatusMessage(F("Settings restored from backup")); + else + StatusScreen::setStatusMessage(F("Settings restored to default")); + + return success; + } + + bool InterfaceSettingsScreen::backupEEPROM() { + uint8_t data[LULZBOT_EEPROM_BACKUP_SIZE]; + + if (persistentStore.read_data(0, data, LULZBOT_EEPROM_BACKUP_SIZE) != PERSISTENT_STORE_SUCCESS) + return false; + + UIFlashStorage::write_config_data(data, LULZBOT_EEPROM_BACKUP_SIZE); + + return true; + } +#endif + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_sounds_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_sounds_screen.cpp new file mode 100644 index 000000000..a1a05d080 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_sounds_screen.cpp @@ -0,0 +1,160 @@ +/******************************* + * interface_sounds_screen.cpp * + *******************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" +#include "screen_data.h" + +using namespace FTDI; +using namespace Theme; +using namespace ExtUI; + +uint8_t InterfaceSoundsScreen::event_sounds[]; + +const char* InterfaceSoundsScreen::getSoundSelection(event_t event) { + return SoundList::name(event_sounds[event]); +} + +void InterfaceSoundsScreen::toggleSoundSelection(event_t event) { + event_sounds[event] = (event_sounds[event]+1) % SoundList::n; + playEventSound(event); +} + +void InterfaceSoundsScreen::setSoundSelection(event_t event, const SoundPlayer::sound_t* sound) { + for(uint8_t i = 0; i < SoundList::n; i++) + if (SoundList::data(i) == sound) + event_sounds[event] = i; +} + +void InterfaceSoundsScreen::playEventSound(event_t event, play_mode_t mode) { + sound.play(SoundList::data(event_sounds[event]), mode); +} + +void InterfaceSoundsScreen::defaultSettings() { + setSoundSelection(PRINTING_STARTED, twinkle); + setSoundSelection(PRINTING_FINISHED, fanfare); + setSoundSelection(PRINTING_FAILED, sad_trombone); +} + +void InterfaceSoundsScreen::onRedraw(draw_mode_t what) { + CommandProcessor cmd; + + if (what & BACKGROUND) { + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .cmd(COLOR_RGB(bg_text_enabled)) + .tag(0) + + #define GRID_COLS 4 + #define GRID_ROWS 9 + + .font(font_medium) + .text(BTN_POS(1,1), BTN_SIZE(4,1), F("Interface Sounds")) + #undef EDGE_R + #define EDGE_R 30 + .font(font_small) + .tag(0).text (BTN_POS(1,2), BTN_SIZE(2,1), F("Sound volume:"), OPT_RIGHTX | OPT_CENTERY) + .text (BTN_POS(1,3), BTN_SIZE(2,1), F("Click sounds:"), OPT_RIGHTX | OPT_CENTERY) + .text (BTN_POS(1,5), BTN_SIZE(2,1), F("Print starting:"), OPT_RIGHTX | OPT_CENTERY) + .text (BTN_POS(1,6), BTN_SIZE(2,1), F("Print finished:"), OPT_RIGHTX | OPT_CENTERY) + .text (BTN_POS(1,7), BTN_SIZE(2,1), F("Print error:"), OPT_RIGHTX | OPT_CENTERY); + #undef EDGE_R + } + + if (what & FOREGROUND) { + #ifdef TOUCH_UI_PORTRAIT + constexpr uint8_t w = 2; + #else + constexpr uint8_t w = 1; + #endif + + cmd.font(font_medium) + .colors(ui_slider) + #define EDGE_R 30 + .tag(2).slider (BTN_POS(3,2), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.volume, 0xFF) + .colors(ui_toggle) + .tag(3).toggle (BTN_POS(3,3), BTN_SIZE(w,1), F("off\xFFon"), UIData::touch_sounds_enabled()) + #undef EDGE_R + .colors(normal_btn) + #define EDGE_R 0 + .tag(4).button (BTN_POS(3,5), BTN_SIZE(2,1), getSoundSelection(PRINTING_STARTED)) + .tag(5).button (BTN_POS(3,6), BTN_SIZE(2,1), getSoundSelection(PRINTING_FINISHED)) + .tag(6).button (BTN_POS(3,7), BTN_SIZE(2,1), getSoundSelection(PRINTING_FAILED)) + .colors(action_btn) + .tag(1).button (BTN_POS(1,9), BTN_SIZE(4,1), F("Back")); + } +} + +void InterfaceSoundsScreen::onEntry() { + screen_data.InterfaceSettingsScreen.volume = SoundPlayer::get_volume(); + BaseScreen::onEntry(); +} + +bool InterfaceSoundsScreen::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_PREVIOUS(); return true; + case 3: UIData::enable_touch_sounds(!UIData::touch_sounds_enabled()); break; + case 4: toggleSoundSelection(PRINTING_STARTED); break; + case 5: toggleSoundSelection(PRINTING_FINISHED); break; + case 6: toggleSoundSelection(PRINTING_FAILED); break; + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +bool InterfaceSoundsScreen::onTouchStart(uint8_t tag) { + CommandProcessor cmd; + #undef EDGE_R + #define EDGE_R 30 + switch (tag) { + case 2: cmd.track_linear(BTN_POS(3,2), BTN_SIZE(2,1), 2).execute(); break; + default: break; + } + return true; +} + +void InterfaceSoundsScreen::onIdle() { + if (refresh_timer.elapsed(TOUCH_UPDATE_INTERVAL)) { + refresh_timer.start(); + + uint16_t value; + CommandProcessor cmd; + switch (cmd.track_tag(value)) { + case 2: + screen_data.InterfaceSettingsScreen.volume = value >> 8; + SoundPlayer::set_volume(screen_data.InterfaceSettingsScreen.volume); + SaveSettingsDialogBox::settingsChanged(); + break; + default: + return; + } + onRefresh(); + } + BaseScreen::onIdle(); +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/jerk_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/jerk_screen.cpp new file mode 100644 index 000000000..7ffb4c5dd --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/jerk_screen.cpp @@ -0,0 +1,65 @@ +/******************* + * jerk_screen.cpp * + *******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && DISABLED(JUNCTION_DEVIATION) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void JerkScreen::onRedraw(draw_mode_t what) { + + widgets_t w(what); + w.precision(1); + w.units(PSTR("mm/s")); + w.heading( PSTR("Maximum Jerk")); + w.color(x_axis) .adjuster( 2, PSTR("X:"), getAxisMaxJerk_mm_s(X) ); + w.color(y_axis) .adjuster( 4, PSTR("Y:"), getAxisMaxJerk_mm_s(Y) ); + w.color(z_axis) .adjuster( 6, PSTR("Z:"), getAxisMaxJerk_mm_s(Z) ); + w.color(e_axis) .adjuster( 8, PSTR("E:"), getAxisMaxJerk_mm_s(E0) ); + w.increments(); +} + +bool JerkScreen::onTouchHeld(uint8_t tag) { + using namespace ExtUI; + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(AxisMaxJerk_mm_s, X); break; + case 3: UI_INCREMENT(AxisMaxJerk_mm_s, X); break; + case 4: UI_DECREMENT(AxisMaxJerk_mm_s, Y); break; + case 5: UI_INCREMENT(AxisMaxJerk_mm_s, Y); break; + case 6: UI_DECREMENT(AxisMaxJerk_mm_s, Z); break; + case 7: UI_INCREMENT(AxisMaxJerk_mm_s, Z); break; + case 8: UI_DECREMENT(AxisMaxJerk_mm_s, E0); break; + case 9: UI_INCREMENT(AxisMaxJerk_mm_s, E0); break; + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/junction_deviation_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/junction_deviation_screen.cpp new file mode 100644 index 000000000..806055ded --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/junction_deviation_screen.cpp @@ -0,0 +1,54 @@ +/******************* + * boot_screen.cpp * + *******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(JUNCTION_DEVIATION) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void JunctionDeviationScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(2); + w.units(PSTR("mm")); + w.heading( PSTR("Junction Deviation")); + w.color(other) .adjuster( 2, PSTR(""), getJunctionDeviation_mm() ); + w.increments(); +} + +bool JunctionDeviationScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(JunctionDeviation_mm); break; + case 3: UI_INCREMENT(JunctionDeviation_mm); break; + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/kill_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/kill_screen.cpp new file mode 100644 index 000000000..84cbd583c --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/kill_screen.cpp @@ -0,0 +1,62 @@ +/******************* + * kill_screen.cpp * + *******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; + +// The kill screen is an oddball that happens after Marlin has killed the events +// loop. So we only have a show() method rather than onRedraw(). The KillScreen +// should not be used as a model for other UI screens as it is an exception. + +void KillScreen::show(progmem_str message) { + CommandProcessor cmd; + + cmd.cmd(CMD_DLSTART) + .cmd(CLEAR_COLOR_RGB(Theme::bg_color)) + .cmd(CLEAR(true,true,true)) + .tag(0); + + #define GRID_COLS 4 + #define GRID_ROWS 8 + + cmd.font(Theme::font_large) + .cmd(COLOR_RGB(Theme::bg_text_enabled)) + .text(BTN_POS(1,2), BTN_SIZE(4,1), message) + .text(BTN_POS(1,3), BTN_SIZE(4,1), F("PRINTER HALTED")) + .text(BTN_POS(1,6), BTN_SIZE(4,1), F("Please reset")); + + #undef GRID_COLS + #undef GRID_ROWS + + cmd.cmd(DL::DL_DISPLAY) + .cmd(CMD_SWAP) + .execute(); + + InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_FAILED, PLAY_SYNCHRONOUS); +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/linear_advance_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/linear_advance_screen.cpp new file mode 100644 index 000000000..499b9db59 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/linear_advance_screen.cpp @@ -0,0 +1,77 @@ +/***************************** + * linear_advance_screen.cpp * + *****************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(LIN_ADVANCE) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void LinearAdvanceScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(2, DEFAULT_LOWEST).color(e_axis); + w.heading( PSTR("Linear Advance:")); + #if EXTRUDERS == 1 + w.adjuster( 2, PSTR("K:"), getLinearAdvance_mm_mm_s(E0) ); + #else + w.adjuster( 2, PSTR("K E1:"), getLinearAdvance_mm_mm_s(E0) ); + w.adjuster( 4, PSTR("K E2:"), getLinearAdvance_mm_mm_s(E1) ); + #if EXTRUDERS > 2 + w.adjuster( 6, PSTR("K E3:"), getLinearAdvance_mm_mm_s(E2) ); + #if EXTRUDERS > 3 + w.adjuster( 8, PSTR("K E4:"), getLinearAdvance_mm_mm_s(E3) ); + #endif + #endif + #endif + w.increments(); +} + +bool LinearAdvanceScreen::onTouchHeld(uint8_t tag) { + using namespace ExtUI; + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(LinearAdvance_mm_mm_s, E0); break; + case 3: UI_INCREMENT(LinearAdvance_mm_mm_s, E0); break; + #if EXTRUDERS > 1 + case 4: UI_DECREMENT(LinearAdvance_mm_mm_s, E1); break; + case 5: UI_INCREMENT(LinearAdvance_mm_mm_s, E1); break; + #if EXTRUDERS > 2 + case 6: UI_DECREMENT(LinearAdvance_mm_mm_s, E2); break; + case 7: UI_INCREMENT(LinearAdvance_mm_mm_s, E2); break; + #if EXTRUDERS > 3 + case 8: UI_DECREMENT(LinearAdvance_mm_mm_s, E3); break; + case 9: UI_INCREMENT(LinearAdvance_mm_mm_s, E3); break; + #endif + #endif + #endif + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/lock_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/lock_screen.cpp new file mode 100644 index 000000000..99b78933a --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/lock_screen.cpp @@ -0,0 +1,214 @@ +/******************* + * lock_screen.cpp * + *******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" +#include "screen_data.h" + +using namespace FTDI; +using namespace Theme; + +uint16_t LockScreen::passcode = 0; + +void LockScreen::onEntry() { + const uint8_t siz = sizeof(screen_data.LockScreen.passcode); + memset(screen_data.LockScreen.passcode, '_', siz-1); + screen_data.LockScreen.passcode[siz-1] = '\0'; + BaseScreen::onEntry(); +} + +void LockScreen::onRedraw(draw_mode_t what) { + CommandProcessor cmd; + + if (what & BACKGROUND) { + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .tag(0); + } + + if (what & FOREGROUND) { + #ifdef TOUCH_UI_PORTRAIT + #define GRID_COLS 1 + #define GRID_ROWS 10 + #else + #define GRID_COLS 1 + #define GRID_ROWS 7 + #endif + + #undef MARGIN_T + #undef MARGIN_B + #define MARGIN_T 3 + #define MARGIN_B 3 + + progmem_str message; + switch (message_style()) { + case 'w': + message = F("Wrong passcode!"); + break; + case 'g': + message = F("Passcode accepted!"); + break; + default: + if (passcode == 0) { + message = F("Select Passcode:"); + } else { + message = F("Enter Passcode:"); + } + } + message_style() = '\0'; // Terminate the string. + + #ifdef TOUCH_UI_PORTRAIT + constexpr uint8_t l = 6; + #else + constexpr uint8_t l = 3; + #endif + + const uint8_t pressed = EventLoop::get_pressed_tag(); + + cmd.font(font_large) + .cmd(COLOR_RGB(bg_text_enabled)) + #ifdef TOUCH_UI_PORTRAIT + .text(BTN_POS(1,2), BTN_SIZE(1,1), message) + .font(font_xlarge) + .text(BTN_POS(1,4), BTN_SIZE(1,1), screen_data.LockScreen.passcode) + #else + .text(BTN_POS(1,1), BTN_SIZE(1,1), message) + .font(font_xlarge) + .text(BTN_POS(1,2), BTN_SIZE(1,1), screen_data.LockScreen.passcode) + #endif + .font(font_large) + .colors(normal_btn) + #ifdef TOUCH_UI_PASSCODE + .keys(BTN_POS(1,l+1), BTN_SIZE(1,1), F("123"), pressed) + .keys(BTN_POS(1,l+2), BTN_SIZE(1,1), F("456"), pressed) + .keys(BTN_POS(1,l+3), BTN_SIZE(1,1), F("789"), pressed) + .keys(BTN_POS(1,l+4), BTN_SIZE(1,1), F("0.<"), pressed); + #else + .keys(BTN_POS(1,l+1), BTN_SIZE(1,1), F("1234567890"), pressed) + .keys(BTN_POS(1,l+2), BTN_SIZE(1,1), F("qwertyuiop"), pressed) + .keys(BTN_POS(1,l+3), BTN_SIZE(1,1), F("asdfghjkl "), pressed) + .keys(BTN_POS(1,l+4), BTN_SIZE(1,1), F("zxcvbnm!?<"), pressed); + #endif + + #undef MARGIN_T + #undef MARGIN_B + #define MARGIN_T MARGIN_DEFAULT + #define MARGIN_B MARGIN_DEFAULT + + #undef GRID_COLS + #undef GRID_ROWS + } +} + +char &LockScreen::message_style() { + // We use the last byte of the passcode string as a flag to indicate, + // which message to show. + constexpr uint8_t last_char = sizeof(screen_data.LockScreen.passcode)-1; + return screen_data.LockScreen.passcode[last_char]; +} + +void LockScreen::onPasscodeEntered() { + if (passcode == 0) { + // We are defining a passcode + message_style() = 0; + onRefresh(); + sound.play(twinkle, PLAY_SYNCHRONOUS); + passcode = compute_checksum(); + GOTO_PREVIOUS(); + } else { + // We are verifying a passcode + if (passcode == compute_checksum()) { + message_style() = 'g'; + onRefresh(); + sound.play(twinkle, PLAY_SYNCHRONOUS); + GOTO_PREVIOUS(); + } else { + message_style() = 'w'; + onRefresh(); + sound.play(sad_trombone, PLAY_SYNCHRONOUS); + current_screen.forget(); // Discard the screen the user was trying to go to. + GOTO_PREVIOUS(); + } + } +} + +bool LockScreen::onTouchEnd(uint8_t tag) { + char *c = strchr(screen_data.LockScreen.passcode,'_'); + if (c) { + if (tag == '<') { + if (c != screen_data.LockScreen.passcode) { + // Backspace deletes previous entered characters. + *--c = '_'; + } + } else { + // Append character to passcode + *c++ = tag; + if (*c == '\0') { + // If at last character, then process the code. + onPasscodeEntered(); + } + } + } + return true; +} + +uint16_t LockScreen::compute_checksum() { + uint16_t checksum = 0; + const char* c = screen_data.LockScreen.passcode; + while (*c) { + checksum = (checksum << 2) ^ *c++; + } + if (checksum == 0) checksum = 0xFFFF; // Prevent a zero checksum + return checksum; +} + +// This function should be called *after* calling GOTO_SCREEN +// to move to new screen. If a passcode is enabled, it will +// immediately jump to the keypad screen, pushing the previous +// screen onto the stack. If the code is entered correctly, +// the stack will be popped, allowing the user to proceed to +// the new screen. Otherwise it will be popped twice, taking +// the user back to where they were before. +void LockScreen::check_passcode() { + if (passcode == 0) return; + message_style() = 0; + GOTO_SCREEN(LockScreen); +} + +bool LockScreen::is_enabled() { + return passcode != 0; +} + +void LockScreen::disable() { + passcode = 0; +} + +void LockScreen::enable() { + message_style() = 0; + passcode = 0; + GOTO_SCREEN(LockScreen); +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/main_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/main_menu.cpp new file mode 100644 index 000000000..9c6a3f4c2 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/main_menu.cpp @@ -0,0 +1,123 @@ +/***************** + * main_menu.cpp * + *****************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && !defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; + +void MainMenu::onRedraw(draw_mode_t what) { + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color)) + .cmd(CLEAR(true,true,true)); + } + + if (what & FOREGROUND) { + CommandProcessor cmd; + cmd.colors(normal_btn) + .font(Theme::font_medium) + #ifdef TOUCH_UI_PORTRAIT + #define GRID_ROWS 8 + #define GRID_COLS 2 + .tag(2).button( BTN_POS(1,1), BTN_SIZE(1,1), F("Auto Home")) + #ifdef NOZZLE_CLEAN_FEATURE + .enabled(1) + #else + .enabled(0) + #endif + .tag(3).button( BTN_POS(2,1), BTN_SIZE(1,1), F("Clean Nozzle")) + .tag(4).button( BTN_POS(1,2), BTN_SIZE(1,1), F("Move Axis")) + .tag(5).button( BTN_POS(2,2), BTN_SIZE(1,1), F("Motors Off")) + .tag(6).button( BTN_POS(1,3), BTN_SIZE(2,1), F("Temperature")) + .tag(7).button( BTN_POS(1,4), BTN_SIZE(2,1), F("Change Filament")) + .tag(8).button( BTN_POS(1,5), BTN_SIZE(2,1), F("Advanced Settings")) + #ifdef PRINTCOUNTER + .enabled(1) + #else + .enabled(0) + #endif + .tag(9).button( BTN_POS(1,7), BTN_SIZE(2,1), F("Printer Statistics")) + .tag(10).button( BTN_POS(1,6), BTN_SIZE(2,1), F("About Printer")) + .colors(action_btn) + .tag(1).button( BTN_POS(1,8), BTN_SIZE(2,1), F("Back")); + #undef GRID_COLS + #undef GRID_ROWS + #else + #define GRID_ROWS 5 + #define GRID_COLS 2 + .tag(2).button( BTN_POS(1,1), BTN_SIZE(1,1), F("Auto Home")) + #if ENABLED(NOZZLE_CLEAN_FEATURE) + .enabled(1) + #else + .enabled(0) + #endif + .tag(3).button( BTN_POS(2,1), BTN_SIZE(1,1), F("Clean Nozzle")) + .tag(4).button( BTN_POS(1,2), BTN_SIZE(1,1), F("Move Axis")) + .tag(5).button( BTN_POS(2,2), BTN_SIZE(1,1), F("Motors Off")) + .tag(6).button( BTN_POS(1,3), BTN_SIZE(1,1), F("Temperature")) + .tag(7).button( BTN_POS(2,3), BTN_SIZE(1,1), F("Change Filament")) + .tag(8).button( BTN_POS(1,4), BTN_SIZE(1,1), F("Advanced Settings")) + #ifdef PRINTCOUNTER + .enabled(1) + #else + .enabled(0) + #endif + .tag(9).button( BTN_POS(2,4), BTN_SIZE(1,1), F("Printer Statistics")) + .tag(10).button( BTN_POS(1,5), BTN_SIZE(1,1), F("About Printer")) + .colors(action_btn) + .tag(1).button( BTN_POS(2,5), BTN_SIZE(1,1), F("Back")); + #undef GRID_COLS + #undef GRID_ROWS + #endif + } +} + +bool MainMenu::onTouchEnd(uint8_t tag) { + using namespace ExtUI; + + switch (tag) { + case 1: GOTO_PREVIOUS(); break; + case 2: SpinnerDialogBox::enqueueAndWait_P(F("G28")); break; + #if ENABLED(NOZZLE_CLEAN_FEATURE) + case 3: injectCommands_P(PSTR("G12")); GOTO_SCREEN(StatusScreen); break; + #endif + case 4: GOTO_SCREEN(MoveAxisScreen); break; + case 5: injectCommands_P(PSTR("M84")); break; + case 6: GOTO_SCREEN(TemperatureScreen); break; + case 7: GOTO_SCREEN(ChangeFilamentScreen); break; + case 8: GOTO_SCREEN(AdvancedSettingsMenu); break; +#if ENABLED(PRINTCOUNTER) + case 9: GOTO_SCREEN(StatisticsScreen); break; +#endif + case 10: GOTO_SCREEN(AboutScreen); break; + default: + return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_acceleration_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_acceleration_screen.cpp new file mode 100644 index 000000000..ccc58b5a3 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_acceleration_screen.cpp @@ -0,0 +1,85 @@ +/******************************* + * max_acceleration_screen.cpp * + *******************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void MaxAccelerationScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(0); + w.units(PSTR("mm/s^2")); + w.heading( PSTR("Maximum Acceleration")); + w.color(x_axis) .adjuster( 2, PSTR("X:"), getAxisMaxAcceleration_mm_s2(X) ); + w.color(y_axis) .adjuster( 4, PSTR("Y:"), getAxisMaxAcceleration_mm_s2(Y) ); + w.color(z_axis) .adjuster( 6, PSTR("Z:"), getAxisMaxAcceleration_mm_s2(Z) ); + #if EXTRUDERS == 1 || DISABLED(DISTINCT_E_FACTORS) + w.color(e_axis).adjuster( 8, PSTR("E:"), getAxisMaxAcceleration_mm_s2(E0) ); + #elif EXTRUDERS > 1 + w.color(e_axis).adjuster( 8, PSTR("E1:"), getAxisMaxAcceleration_mm_s2(E0) ); + w.color(e_axis).adjuster(10, PSTR("E2:"), getAxisMaxAcceleration_mm_s2(E1) ); + #if EXTRUDERS > 2 + w.color(e_axis).adjuster(12, PSTR("E3:"), getAxisMaxAcceleration_mm_s2(E2) ); + #endif + #if EXTRUDERS > 3 + w.color(e_axis).adjuster(14, PSTR("E4:"), getAxisMaxAcceleration_mm_s2(E3) ); + #endif + #endif + w.increments(); +} + +bool MaxAccelerationScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(AxisMaxAcceleration_mm_s2, X ); break; + case 3: UI_INCREMENT(AxisMaxAcceleration_mm_s2, X ); break; + case 4: UI_DECREMENT(AxisMaxAcceleration_mm_s2, Y ); break; + case 5: UI_INCREMENT(AxisMaxAcceleration_mm_s2, Y ); break; + case 6: UI_DECREMENT(AxisMaxAcceleration_mm_s2, Z ); break; + case 7: UI_INCREMENT(AxisMaxAcceleration_mm_s2, Z ); break; + case 8: UI_DECREMENT(AxisMaxAcceleration_mm_s2, E0); break; + case 9: UI_INCREMENT(AxisMaxAcceleration_mm_s2, E0); break; + #if EXTRUDERS > 1 && ENABLED(DISTINCT_E_FACTORS) + case 10: UI_DECREMENT(AxisMaxAcceleration_mm_s2, E1); break; + case 11: UI_INCREMENT(AxisMaxAcceleration_mm_s2, E1); break; + #endif + #if EXTRUDERS > 2 && ENABLED(DISTINCT_E_FACTORS) + case 12: UI_DECREMENT(AxisMaxAcceleration_mm_s2, E2); break; + case 13: UI_INCREMENT(AxisMaxAcceleration_mm_s2, E2); break; + #endif + #if EXTRUDERS > 3 && ENABLED(DISTINCT_E_FACTORS) + case 14: UI_DECREMENT(AxisMaxAcceleration_mm_s2, E3); break; + case 15: UI_INCREMENT(AxisMaxAcceleration_mm_s2, E3); break; + #endif + default: + return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_velocity_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_velocity_screen.cpp new file mode 100644 index 000000000..e147bfe4e --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_velocity_screen.cpp @@ -0,0 +1,87 @@ +/*************************** + * max_velocity_screen.cpp * + ***************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void MaxVelocityScreen::onRedraw(draw_mode_t what) { + using namespace ExtUI; + widgets_t w(what); + w.precision(0); + w.units(PSTR("mm/s")); + w.heading( PSTR("Maximum Velocity")); + w.color(x_axis) .adjuster( 2, PSTR("X:"), getAxisMaxFeedrate_mm_s(X) ); + w.color(y_axis) .adjuster( 4, PSTR("Y:"), getAxisMaxFeedrate_mm_s(Y) ); + w.color(z_axis) .adjuster( 6, PSTR("Z:"), getAxisMaxFeedrate_mm_s(Z) ); + #if EXTRUDERS == 1 || DISABLED(DISTINCT_E_FACTORS) + w.color(e_axis) .adjuster( 8, PSTR("E:"), getAxisMaxFeedrate_mm_s(E0) ); + #elif EXTRUDERS > 1 + w.color(e_axis) .adjuster( 8, PSTR("E1:"), getAxisMaxFeedrate_mm_s(E0) ); + w.color(e_axis) .adjuster( 10, PSTR("E2:"), getAxisMaxFeedrate_mm_s(E1) ); + #if EXTRUDERS > 2 + w.color(e_axis).adjuster( 12, PSTR("E3:"), getAxisMaxFeedrate_mm_s(E2) ); + #endif + #if EXTRUDERS > 3 + w.color(e_axis).adjuster( 14, PSTR("E4:"), getAxisMaxFeedrate_mm_s(E3) ); + #endif + #endif + w.increments(); +} + +bool MaxVelocityScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(AxisMaxFeedrate_mm_s, X); break; + case 3: UI_INCREMENT(AxisMaxFeedrate_mm_s, X); break; + case 4: UI_DECREMENT(AxisMaxFeedrate_mm_s, Y); break; + case 5: UI_INCREMENT(AxisMaxFeedrate_mm_s, Y); break; + case 6: UI_DECREMENT(AxisMaxFeedrate_mm_s, Z); break; + case 7: UI_INCREMENT(AxisMaxFeedrate_mm_s, Z); break; + case 8: UI_DECREMENT(AxisMaxFeedrate_mm_s, E0); break; + case 9: UI_INCREMENT(AxisMaxFeedrate_mm_s, E0); break; + #if EXTRUDERS > 1 && ENABLED(DISTINCT_E_FACTORS) + case 10: UI_DECREMENT(AxisMaxFeedrate_mm_s, E1); break; + case 11: UI_INCREMENT(AxisMaxFeedrate_mm_s, E1); break; + #endif + #if EXTRUDERS > 2 && ENABLED(DISTINCT_E_FACTORS) + case 12: UI_DECREMENT(AxisMaxFeedrate_mm_s, E2); break; + case 13: UI_INCREMENT(AxisMaxFeedrate_mm_s, E2); break; + #endif + #if EXTRUDERS > 3 && ENABLED(DISTINCT_E_FACTORS) + case 14: UI_DECREMENT(AxisMaxFeedrate_mm_s, E3); break; + case 15: UI_INCREMENT(AxisMaxFeedrate_mm_s, E3); break; + #endif + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/media_player_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/media_player_screen.cpp new file mode 100644 index 000000000..5db38bec0 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/media_player_screen.cpp @@ -0,0 +1,169 @@ +/*************************** + * media_player_screen.cpp * + ***************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +/** + * The MediaPlayerScreen allows an AVI to be played. + * + * It requires a special AVI file. The following video + * and audio codecs must be used: + * + * -vcodec mjpeg -pix_fmt yuvj420p + * -acodec adpcm_ima_wav + * + * To generate a 2 second static screen from a png file: + * + * ffmpeg -i startup.png -vcodec mjpeg -pix_fmt yuvj420p -r 1 video.avi + * sox -n -r 44100 -b 8 -c 2 -L silence.wav trim 0.0 2.000 + * ffmpeg -i silence.wav -acodec adpcm_ima_wav silence.avi + * ffmpeg -i video.avi -i silence.wav -c copy -map 0:v:0 -map 1:a:0 startup.avi + */ + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +#include "../archim2-flash/flash_storage.h" +#include "../archim2-flash/media_file_reader.h" + +using namespace FTDI; + +void MediaPlayerScreen::onEntry() { + BaseScreen::onEntry(); + CLCD::turn_on_backlight(); + SoundPlayer::set_volume(255); +} + +void MediaPlayerScreen::onRedraw(draw_mode_t) { +} + +bool MediaPlayerScreen::playCardMedia() { + #if ENABLED(SDSUPPORT) + char fname[15]; + strcpy_P(fname, PSTR("STARTUP.AVI")); + + MediaFileReader reader; + if (!reader.open(fname)) + return false; + + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Starting to play STARTUP.AVI"); + playStream(&reader, MediaFileReader::read); + reader.close(); + #endif + return true; +} + +// Attempt to play media from the onboard SPI flash chip +bool MediaPlayerScreen::playBootMedia() { + UIFlashStorage::BootMediaReader reader; + if (!reader.isAvailable()) return false; + + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Starting to play boot video"); + playStream(&reader, UIFlashStorage::BootMediaReader::read); + return true; +} + +void MediaPlayerScreen::playStream(void *obj, media_streamer_func_t *data_stream) { + #if FTDI_API_LEVEL >= 810 + if (FTDI::ftdi_chip >= 810) { + // Set up the media FIFO on the end of RAMG, as the top of RAMG + // will be used as the framebuffer. + + uint8_t buf[512]; + const uint32_t block_size = 512; + const uint32_t fifo_size = block_size * 2; + const uint32_t fifo_start = CLCD::MAP::RAM_G + CLCD::MAP::RAM_G_SIZE - fifo_size; + + CommandProcessor cmd; + cmd.cmd(CMD_DLSTART) + .cmd(CLEAR_COLOR_RGB(0x000000)) + .cmd(CLEAR(true,true,true)) + .cmd(DL::DL_DISPLAY) + .cmd(CMD_SWAP) + .execute() + .cmd(CMD_DLSTART) + .mediafifo(fifo_start, fifo_size) + .playvideo(OPT_FULLSCREEN | OPT_MEDIAFIFO | OPT_NOTEAR | OPT_SOUND) + .cmd(DL::DL_DISPLAY) + .cmd(CMD_SWAP) + .execute(); + + uint32_t writePtr = 0; + int16_t nBytes; + + uint32_t t = millis(); + uint8_t timeouts; + + spiInit(SPI_HALF_SPEED); // Boost SPI speed for video playback + + do { + // Write block n + nBytes = (*data_stream)(obj, buf, block_size); + if (nBytes == -1) break; + + if (millis() - t > 10) { + ExtUI::yield(); + t = millis(); + } + + CLCD::mem_write_bulk (fifo_start + writePtr, buf, nBytes); + + // Wait for FTDI810 to finish playing block n-1 + timeouts = 20; + do { + if (millis() - t > 10) { + ExtUI::yield(); + t = millis(); + timeouts--; + if (timeouts == 0) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Timeout playing video"); + cmd.reset(); + goto exit; + } + } + } while (CLCD::mem_read_32(CLCD::REG::MEDIAFIFO_READ) != writePtr); + + // Start playing block n + writePtr = (writePtr + nBytes) % fifo_size; + CLCD::mem_write_32(CLCD::REG::MEDIAFIFO_WRITE, writePtr); + } while (nBytes == block_size); + + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Done playing video"); + + exit: + spiInit(SPI_SPEED); // Restore default speed + + // Since playing media overwrites RAMG, we need to reinitialize + // everything that is stored in RAMG. + cmd.cmd(CMD_DLSTART).execute(); + DLCache::init(); + StatusScreen::onStartup(); + } + #endif // FTDI_API_LEVEL >= 810 +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/move_axis_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/move_axis_screen.cpp new file mode 100644 index 000000000..60229907b --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/move_axis_screen.cpp @@ -0,0 +1,132 @@ +/************************ + * move_axis_screen.cpp * + ************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" +#include "screen_data.h" + +using namespace FTDI; +using namespace ExtUI; + +void MoveAxisScreen::onEntry() { + // Since Marlin keeps only one absolute position for all the extruders, + // we have to keep track of the relative motion of individual extruders + // ourselves. The relative distances are reset to zero whenever this + // screen is entered. + + for(uint8_t i = 0; i < ExtUI::extruderCount; i++) { + screen_data.MoveAxisScreen.e_rel[i] = 0; + } + BaseNumericAdjustmentScreen::onEntry(); +} + +void MoveAxisScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(1); + w.units(PSTR("mm")); + w.heading( PSTR("Move Axis")); + w.home_buttons(20); + w.color(Theme::x_axis ) .adjuster( 2, PSTR("X:"), getAxisPosition_mm(X), canMove(X)); + w.color(Theme::y_axis ) .adjuster( 4, PSTR("Y:"), getAxisPosition_mm(Y), canMove(Y)); + w.color(Theme::z_axis ) .adjuster( 6, PSTR("Z:"), getAxisPosition_mm(Z), canMove(Z)); + + #if EXTRUDERS == 1 + w.color(Theme::e_axis) .adjuster( 8, PSTR("E:"), screen_data.MoveAxisScreen.e_rel[0], canMove(E0)); + #elif EXTRUDERS > 1 + w.color(Theme::e_axis) .adjuster( 8, PSTR("E1:"), screen_data.MoveAxisScreen.e_rel[0], canMove(E0)); + w.color(Theme::e_axis) .adjuster( 10, PSTR("E2:"), screen_data.MoveAxisScreen.e_rel[1], canMove(E1)); + #if EXTRUDERS > 2 + w.color(Theme::e_axis) .adjuster( 12, PSTR("E3:"), screen_data.MoveAxisScreen.e_rel[2], canMove(E2)); + #endif + #if EXTRUDERS > 3 + w.color(Theme::e_axis) .adjuster( 14, PSTR("E4:"), screen_data.MoveAxisScreen.e_rel[3], canMove(E3)); + #endif + #endif + w.increments(); +} + +bool MoveAxisScreen::onTouchHeld(uint8_t tag) { + #define UI_INCREMENT_AXIS(axis) setManualFeedrate(axis, increment); UI_INCREMENT(AxisPosition_mm, axis); + #define UI_DECREMENT_AXIS(axis) setManualFeedrate(axis, increment); UI_DECREMENT(AxisPosition_mm, axis); + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT_AXIS(X); break; + case 3: UI_INCREMENT_AXIS(X); break; + case 4: UI_DECREMENT_AXIS(Y); break; + case 5: UI_INCREMENT_AXIS(Y); break; + case 6: UI_DECREMENT_AXIS(Z); break; + case 7: UI_INCREMENT_AXIS(Z); break; + // For extruders, also update relative distances. + case 8: UI_DECREMENT_AXIS(E0); screen_data.MoveAxisScreen.e_rel[0] -= increment; break; + case 9: UI_INCREMENT_AXIS(E0); screen_data.MoveAxisScreen.e_rel[0] += increment; break; + #if EXTRUDERS > 1 + case 10: UI_DECREMENT_AXIS(E1); screen_data.MoveAxisScreen.e_rel[1] -= increment; break; + case 11: UI_INCREMENT_AXIS(E1); screen_data.MoveAxisScreen.e_rel[1] += increment; break; + #endif + #if EXTRUDERS > 2 + case 12: UI_DECREMENT_AXIS(E2); screen_data.MoveAxisScreen.e_rel[2] -= increment; break; + case 13: UI_INCREMENT_AXIS(E2); screen_data.MoveAxisScreen.e_rel[2] += increment; break; + #endif + #if EXTRUDERS > 3 + case 14: UI_DECREMENT_AXIS(E3); screen_data.MoveAxisScreen.e_rel[3] -= increment; break; + case 15: UI_INCREMENT_AXIS(E3); screen_data.MoveAxisScreen.e_rel[3] += increment; break; + #endif + case 20: injectCommands_P(PSTR("G28 X")); break; + case 21: injectCommands_P(PSTR("G28 Y")); break; + case 22: injectCommands_P(PSTR("G28 Z")); break; + case 23: injectCommands_P(PSTR("G28")); break; + default: + return false; + } + #undef UI_DECREMENT_AXIS + #undef UI_INCREMENT_AXIS + return true; +} + +float MoveAxisScreen::getManualFeedrate(uint8_t axis, float increment_mm) { + // Compute feedrate so that the tool lags the adjuster when it is + // being held down, this allows enough margin for the planner to + // connect segments and even out the motion. + constexpr float max_manual_feedrate[XYZE] = MAX_MANUAL_FEEDRATE; + return min(max_manual_feedrate[axis]/60, abs(increment_mm * TOUCH_REPEATS_PER_SECOND * 0.80)); +} + +void MoveAxisScreen::setManualFeedrate(ExtUI::axis_t axis, float increment_mm) { + ExtUI::setFeedrate_mm_s(getManualFeedrate(X_AXIS + (axis - ExtUI::X), increment_mm)); +} + +void MoveAxisScreen::setManualFeedrate(ExtUI::extruder_t, float increment_mm) { + ExtUI::setFeedrate_mm_s(getManualFeedrate(E_AXIS, increment_mm)); +} + +void MoveAxisScreen::onIdle() { + if (refresh_timer.elapsed(STATUS_UPDATE_INTERVAL)) { + onRefresh(); + refresh_timer.start(); + } + BaseScreen::onIdle(); +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nozzle_offsets_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nozzle_offsets_screen.cpp new file mode 100644 index 000000000..558c1acfc --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nozzle_offsets_screen.cpp @@ -0,0 +1,73 @@ +/***************************** + * nozzle_offsets_screen.cpp * + *****************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && HOTENDS > 1 + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; + +void NozzleOffsetScreen::onEntry() { + // Since we don't allow the user to edit the offsets for E0, + // make sure they are all zero. + normalizeNozzleOffset(X); + normalizeNozzleOffset(Y); + normalizeNozzleOffset(Z); +} + +void NozzleOffsetScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(2).units(PSTR("mm")); + + w.heading( PSTR("Nozzle Offset")); + w.color(Theme::x_axis).adjuster(2, PSTR("X:"), ExtUI::getNozzleOffset_mm(X, E1)); + w.color(Theme::y_axis).adjuster(4, PSTR("Y:"), ExtUI::getNozzleOffset_mm(Y, E1)); + w.color(Theme::z_axis).adjuster(6, PSTR("Z:"), ExtUI::getNozzleOffset_mm(Z, E1)); + #if ENABLED(CALIBRATION_GCODE) + w.button(8, PSTR("Measure automatically"), !isPrinting()); + #endif + w.increments(); +} + +bool NozzleOffsetScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(NozzleOffset_mm, X, E1); break; + case 3: UI_INCREMENT(NozzleOffset_mm, X, E1); break; + case 4: UI_DECREMENT(NozzleOffset_mm, Y, E1); break; + case 5: UI_INCREMENT(NozzleOffset_mm, Y, E1); break; + case 6: UI_DECREMENT(NozzleOffset_mm, Z, E1); break; + case 7: UI_INCREMENT(NozzleOffset_mm, Z, E1); break; + #if ENABLED(CALIBRATION_GCODE) + case 8: GOTO_SCREEN(ConfirmAutoCalibrationDialogBox); return true; + #endif + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp new file mode 100644 index 000000000..99badde0b --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp @@ -0,0 +1,128 @@ +/******************** + * nudge_nozzle.cpp * + ********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(BABYSTEPPING) + +#include "screens.h" +#include "screen_data.h" + +using namespace FTDI; +using namespace Theme; +using namespace ExtUI; + +void NudgeNozzleScreen::onEntry() { + screen_data.NudgeNozzleScreen.show_offsets = false; + #if EXTRUDERS > 1 + screen_data.NudgeNozzleScreen.link_nozzles = true; + #endif + LOOP_XYZ(i) { + screen_data.NudgeNozzleScreen.rel[i] = 0; + } + BaseNumericAdjustmentScreen::onEntry(); +} + +void NudgeNozzleScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(2, BaseNumericAdjustmentScreen::DEFAULT_MIDRANGE).units(PSTR("mm")); + + w.heading( PSTR("Nudge Nozzle")); + #if ENABLED(BABYSTEP_XY) + w.color(x_axis).adjuster(2, PSTR("X:"), screen_data.NudgeNozzleScreen.rel[0] / getAxisSteps_per_mm(X)); + w.color(y_axis).adjuster(4, PSTR("Y:"), screen_data.NudgeNozzleScreen.rel[1] / getAxisSteps_per_mm(Y)); + #endif + w.color(z_axis).adjuster(6, PSTR("Z:"), screen_data.NudgeNozzleScreen.rel[2] / getAxisSteps_per_mm(Z)); + w.increments(); + #if EXTRUDERS > 1 + w.toggle (8, PSTR("Adjust Both Nozzles:"), PSTR("no\xFFyes"), screen_data.NudgeNozzleScreen.link_nozzles, PSTR("Yes\nNo")); + #endif + + #if EXTRUDERS > 1 || HAS_BED_PROBE + w.toggle (9, PSTR("Show Offsets:"), PSTR("no\xFFyes"), screen_data.NudgeNozzleScreen.show_offsets, PSTR("Yes\nNo")); + + if (screen_data.NudgeNozzleScreen.show_offsets) { + char str[19], num1[7]; + + w.draw_mode(BOTH); + w.color(other); + + #if HAS_BED_PROBE + dtostrf(getZOffset_mm(), 4, 2, num1); + sprintf_P(str, PSTR("%s mm"), num1); + w.text_field (0, PSTR("Z Offset"), str); + #endif + + #if EXTRUDERS > 1 + char num2[7], num3[7]; + dtostrf(getNozzleOffset_mm(X, E1), 4, 2, num1); + dtostrf(getNozzleOffset_mm(Y, E1), 4, 2, num2); + dtostrf(getNozzleOffset_mm(Z, E1), 4, 2, num3); + sprintf_P(str, PSTR("%s; %s; %s mm"), num1, num2, num3); + w.text_field (0, PSTR("Noz. Offset"), str); + #endif + } + #endif +} + +bool NudgeNozzleScreen::onTouchHeld(uint8_t tag) { + const float inc = getIncrement(); + #if EXTRUDERS > 1 + const bool link = screen_data.NudgeNozzleScreen.link_nozzles; + #else + constexpr bool link = true; + #endif + int16_t steps; + switch (tag) { + case 2: steps = mmToWholeSteps(inc, X); smartAdjustAxis_steps(-steps, X, link); screen_data.NudgeNozzleScreen.rel[0] -= steps; break; + case 3: steps = mmToWholeSteps(inc, X); smartAdjustAxis_steps( steps, X, link); screen_data.NudgeNozzleScreen.rel[0] += steps; break; + case 4: steps = mmToWholeSteps(inc, Y); smartAdjustAxis_steps(-steps, Y, link); screen_data.NudgeNozzleScreen.rel[1] -= steps; break; + case 5: steps = mmToWholeSteps(inc, Y); smartAdjustAxis_steps( steps, Y, link); screen_data.NudgeNozzleScreen.rel[1] += steps; break; + case 6: steps = mmToWholeSteps(inc, Z); smartAdjustAxis_steps(-steps, Z, link); screen_data.NudgeNozzleScreen.rel[2] -= steps; break; + case 7: steps = mmToWholeSteps(inc, Z); smartAdjustAxis_steps( steps, Z, link); screen_data.NudgeNozzleScreen.rel[2] += steps; break; + #if EXTRUDERS > 1 + case 8: screen_data.NudgeNozzleScreen.link_nozzles = !link; break; + #endif + case 9: screen_data.NudgeNozzleScreen.show_offsets = !screen_data.NudgeNozzleScreen.show_offsets; break; + default: + return false; + } + #if EXTRUDERS > 1 || HAS_BED_PROBE + SaveSettingsDialogBox::settingsChanged(); + #endif + return true; +} + +bool NudgeNozzleScreen::onTouchEnd(uint8_t tag) { + if (tag == 1) { + SaveSettingsDialogBox::promptToSaveSettings(); + return true; + } else { + return BaseNumericAdjustmentScreen::onTouchEnd(tag); + } +} + +void NudgeNozzleScreen::onIdle() { + reset_menu_timeout(); +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/restore_failsafe_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/restore_failsafe_dialog_box.cpp new file mode 100644 index 000000000..a93727cd8 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/restore_failsafe_dialog_box.cpp @@ -0,0 +1,51 @@ +/*********************************** + * restore_failsafe_dialog_box.cpp * + ***********************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace ExtUI; + +void RestoreFailsafeDialogBox::onRedraw(draw_mode_t) { + drawMessage(F("Are you sure? Customizations will be lost.")); + drawYesNoButtons(); +} + +bool RestoreFailsafeDialogBox::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: + ExtUI::injectCommands_P(PSTR("M502\nM117 Factory settings restored.")); + AlertDialogBox::show(F("Factory settings restored.")); + // Remove RestoreFailsafeDialogBox from the stack + // so the alert box doesn't return to it. + current_screen.forget(); + SaveSettingsDialogBox::settingsChanged(); + return true; + default: + return DialogBoxBaseClass::onTouchEnd(tag); + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/save_settings_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/save_settings_dialog_box.cpp new file mode 100644 index 000000000..8a58af119 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/save_settings_dialog_box.cpp @@ -0,0 +1,65 @@ +/******************************** + * save_settings_dialog_box.cpp * + ********************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace ExtUI; + +bool SaveSettingsDialogBox::needs_save = false; + +void SaveSettingsDialogBox::onRedraw(draw_mode_t) { + drawMessage(F("Do you wish to save these settings as defaults?")); + drawYesNoButtons(); +} + +bool SaveSettingsDialogBox::onTouchEnd(uint8_t tag) { + needs_save = false; + switch (tag) { + case 1: + injectCommands_P(PSTR("M500")); + AlertDialogBox::show(F("Settings saved!")); + // Remove SaveSettingsDialogBox from the stack + // so the alert box doesn't return to me. + current_screen.forget(); + return true; + default: + return DialogBoxBaseClass::onTouchEnd(tag); + } +} + +void SaveSettingsDialogBox::promptToSaveSettings() { + if (needs_save) { + // Remove current screen from the stack + // so SaveSettingsDialogBox doesn't return here. + GOTO_SCREEN(SaveSettingsDialogBox); + current_screen.forget(); + } else { + // No save needed. + GOTO_PREVIOUS(); + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screen_data.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screen_data.h new file mode 100644 index 000000000..ed50a8bc3 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screen_data.h @@ -0,0 +1,77 @@ +/***************** + * screen_data.h * + *****************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#include "../ftdi_eve_lib/ftdi_eve_lib.h" + +// To save RAM, store state information related to a particular screen +// in a union. The values should be initialized in the onEntry method. + +struct base_numeric_adjustment_t {uint8_t increment;}; + +union screen_data_t { + struct base_numeric_adjustment_t BaseNumericAdjustmentScreen; + struct {uint8_t volume; uint8_t brightness;} InterfaceSettingsScreen; + struct {char passcode[5];} LockScreen; + struct {bool isError;} AlertDialogBox; + struct {bool auto_hide;} SpinnerDialogBox; + struct { + uint8_t e_tag, t_tag, repeat_tag; + ExtUI::extruder_t saved_extruder; + } ChangeFilamentScreen; + struct { + struct { + uint8_t is_dir : 1; + uint8_t is_root : 1; + } flags; + uint8_t selected_tag; + uint8_t num_page; + uint8_t cur_page; + #if ENABLED(SCROLL_LONG_FILENAMES) && (FTDI_API_LEVEL >= 810) + uint16_t scroll_pos; + uint16_t scroll_max; + #endif + } FilesScreen; + struct { + struct base_numeric_adjustment_t placeholder; + float e_rel[ExtUI::extruderCount]; + } MoveAxisScreen; +#if ENABLED(DEVELOPER_SCREENS) + struct { + uint32_t next_watchdog_trigger; + const char* message; + } StressTestScreen; +#endif +#if ENABLED(BABYSTEPPING) + struct { + struct base_numeric_adjustment_t placeholder; + int16_t rel[XYZ]; + #if EXTRUDERS > 1 + bool link_nozzles; + #endif + bool show_offsets; + } NudgeNozzleScreen; +#endif +}; + +extern screen_data_t screen_data; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.cpp new file mode 100644 index 000000000..fa53a0130 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.cpp @@ -0,0 +1,113 @@ +/*************** + * screens.cpp * + ***************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) +#include "screens.h" +#include "screen_data.h" + +tiny_timer_t refresh_timer; +screen_data_t screen_data; + +SCREEN_TABLE { + DECL_SCREEN(BootScreen), + DECL_SCREEN(TouchCalibrationScreen), + DECL_SCREEN(StatusScreen), + DECL_SCREEN(MainMenu), + DECL_SCREEN(TuneMenu), + DECL_SCREEN(AdvancedSettingsMenu), + DECL_SCREEN(AlertDialogBox), + DECL_SCREEN(ConfirmUserRequestAlertBox), + DECL_SCREEN(RestoreFailsafeDialogBox), + DECL_SCREEN(SaveSettingsDialogBox), + DECL_SCREEN(ConfirmAbortPrintDialogBox), +#if ENABLED(CALIBRATION_GCODE) + DECL_SCREEN(ConfirmAutoCalibrationDialogBox), +#endif + DECL_SCREEN(SpinnerDialogBox), + DECL_SCREEN(AboutScreen), +#if ENABLED(PRINTCOUNTER) + DECL_SCREEN(StatisticsScreen), +#endif +#if ENABLED(BABYSTEPPING) + DECL_SCREEN(NudgeNozzleScreen), +#endif + DECL_SCREEN(MoveAxisScreen), + DECL_SCREEN(StepsScreen), +#if HAS_TRINAMIC + DECL_SCREEN(StepperCurrentScreen), + DECL_SCREEN(StepperBumpSensitivityScreen), +#endif +#if HAS_BED_PROBE + DECL_SCREEN(ZOffsetScreen), +#endif +#if HOTENDS > 1 + DECL_SCREEN(NozzleOffsetScreen), +#endif +#if ENABLED(BACKLASH_GCODE) + DECL_SCREEN(BacklashCompensationScreen), +#endif + DECL_SCREEN(FeedratePercentScreen), + DECL_SCREEN(MaxVelocityScreen), + DECL_SCREEN(MaxAccelerationScreen), + DECL_SCREEN(DefaultAccelerationScreen), +#if ENABLED(JUNCTION_DEVIATION) + DECL_SCREEN(JunctionDeviationScreen), +#else + DECL_SCREEN(JerkScreen), +#endif +#if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR) + DECL_SCREEN(FilamentMenu), +#endif +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + DECL_SCREEN(FilamentRunoutScreen), +#endif +#if ENABLED(LIN_ADVANCE) + DECL_SCREEN(LinearAdvanceScreen), +#endif + DECL_SCREEN(TemperatureScreen), + DECL_SCREEN(ChangeFilamentScreen), + DECL_SCREEN(InterfaceSettingsScreen), + DECL_SCREEN(InterfaceSoundsScreen), + DECL_SCREEN(LockScreen), + DECL_SCREEN(FilesScreen), + DECL_SCREEN(EndstopStatesScreen), +#ifdef LULZBOT_USE_BIOPRINTER_UI + DECL_SCREEN(BioPrintingDialogBox), + DECL_SCREEN(BioConfirmHomeXYZ), + DECL_SCREEN(BioConfirmHomeE), +#endif +#if ENABLED(DEVELOPER_SCREENS) + DECL_SCREEN(DeveloperMenu), + DECL_SCREEN(ConfirmEraseFlashDialogBox), + DECL_SCREEN(WidgetsScreen), + DECL_SCREEN(TouchRegistersScreen), + DECL_SCREEN(StressTestScreen), +#endif + DECL_SCREEN(MediaPlayerScreen), + DECL_SCREEN(DisplayTuningScreen) +}; + +SCREEN_TABLE_POST + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h new file mode 100644 index 000000000..d8c48de9e --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h @@ -0,0 +1,712 @@ +/************* + * screens.h * + *************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#include "../ftdi_eve_lib/ftdi_eve_lib.h" +#include "../theme/theme.h" + +#define ROUND(val) uint16_t((val)+0.5) + +extern tiny_timer_t refresh_timer; + +/********************************* DL CACHE SLOTS ******************************/ + +// In order to reduce SPI traffic, we cache display lists (DL) in RAMG. This +// is done using the CLCD::DLCache class, which takes a unique ID for each +// cache location. These IDs are defined here: + +enum { + STATUS_SCREEN_CACHE, + MENU_SCREEN_CACHE, + TUNE_SCREEN_CACHE, + ADJUST_OFFSETS_SCREEN_CACHE, + ALERT_BOX_CACHE, + SPINNER_CACHE, + ADVANCED_SETTINGS_SCREEN_CACHE, + MOVE_AXIS_SCREEN_CACHE, + TEMPERATURE_SCREEN_CACHE, + STEPS_SCREEN_CACHE, + STEPPER_CURRENT_SCREEN_CACHE, + STEPPER_BUMP_SENSITIVITY_SCREEN_CACHE, + ZOFFSET_SCREEN_CACHE, + NOZZLE_OFFSET_SCREEN_CACHE, + BACKLASH_COMPENSATION_SCREEN_CACHE, + MAX_FEEDRATE_SCREEN_CACHE, + MAX_VELOCITY_SCREEN_CACHE, + MAX_ACCELERATION_SCREEN_CACHE, + DEFAULT_ACCELERATION_SCREEN_CACHE, +#if ENABLED(JUNCTION_DEVIATION) + JUNC_DEV_SCREEN_CACHE, +#else + JERK_SCREEN_CACHE, +#endif +#if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR) + FILAMENT_MENU_CACHE, +#endif +#if ENABLED(LIN_ADVANCE) + LINEAR_ADVANCE_SCREEN_CACHE, +#endif +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + FILAMENT_RUNOUT_SCREEN_CACHE, +#endif +#ifdef LULZBOT_USE_BIOPRINTER_UI + PRINTING_SCREEN_CACHE, +#endif + CHANGE_FILAMENT_SCREEN_CACHE, + INTERFACE_SETTINGS_SCREEN_CACHE, + INTERFACE_SOUNDS_SCREEN_CACHE, + LOCK_SCREEN_CACHE, + FILES_SCREEN_CACHE, + DISPLAY_TIMINGS_SCREEN_CACHE +}; + +// To save MCU RAM, the status message is "baked" in to the status screen +// cache, so we reserve a large chunk of memory for the DL cache + +#define STATUS_SCREEN_DL_SIZE 2048 +#define ALERT_BOX_DL_SIZE 3072 +#define SPINNER_DL_SIZE 3072 +#define FILE_SCREEN_DL_SIZE 3072 +#define PRINTING_SCREEN_DL_SIZE 2048 + +/************************* MENU SCREEN DECLARATIONS *************************/ + +class BaseScreen : public UIScreen { + protected: + #ifdef LCD_TIMEOUT_TO_STATUS + static uint32_t last_interaction; + #endif + + public: + static bool buttonStyleCallback(CommandProcessor &, uint8_t, uint8_t &, uint16_t &, bool); + + static void reset_menu_timeout(); + + static void onEntry(); + static void onIdle(); +}; + +class BootScreen : public BaseScreen, public UncachedScreen { + private: + static void showSplashScreen(); + public: + static void onRedraw(draw_mode_t); + static void onIdle(); +}; + +class AboutScreen : public BaseScreen, public UncachedScreen { + public: + static void onEntry(); + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); +}; + +#if ENABLED(PRINTCOUNTER) + class StatisticsScreen : public BaseScreen, public UncachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + }; +#endif + +class KillScreen { + // The KillScreen is behaves differently than the + // others, so we do not bother extending UIScreen. + public: + static void show(progmem_str msg); +}; + +class DialogBoxBaseClass : public BaseScreen { + protected: + template static void drawMessage(const T, int16_t font = 0); + static void drawYesNoButtons(uint8_t default_btn = 0); + static void drawOkayButton(); + static void drawSpinner(); + static void drawButton(const progmem_str); + + static void onRedraw(draw_mode_t) {}; + public: + static bool onTouchEnd(uint8_t tag); +}; + +class AlertDialogBox : public DialogBoxBaseClass, public CachedScreen { + public: + static void onEntry(); + static void onRedraw(draw_mode_t); + template static void show(T); + template static void showError(T); + static void hide(); +}; + +class RestoreFailsafeDialogBox : public DialogBoxBaseClass, public UncachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); +}; + +class SaveSettingsDialogBox : public DialogBoxBaseClass, public UncachedScreen { + private: + static bool needs_save; + + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + + static void promptToSaveSettings(); + static void settingsChanged() {needs_save = true;} +}; + +class ConfirmAbortPrintDialogBox : public DialogBoxBaseClass, public UncachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); +}; + +#if ENABLED(CALIBRATION_GCODE) +class ConfirmAutoCalibrationDialogBox : public DialogBoxBaseClass, public UncachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); +}; +#endif + +class ConfirmUserRequestAlertBox : public AlertDialogBox { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t); + static void hide(); + static void show(const char*); +}; + +class SpinnerDialogBox : public DialogBoxBaseClass, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static void onIdle(); + + static void show(const progmem_str); + static void hide(); + static void enqueueAndWait_P(const progmem_str commands); + static void enqueueAndWait_P(const progmem_str message, const progmem_str commands); +}; + +#if !defined(LULZBOT_USE_BIOPRINTER_UI) +class StatusScreen : public BaseScreen, public CachedScreen { + private: + static void draw_axis_position(draw_mode_t); + static void draw_temperature(draw_mode_t); + static void draw_progress(draw_mode_t); + static void draw_interaction_buttons(draw_mode_t); + static void draw_status_message(draw_mode_t, const char * const); + + public: + static void setStatusMessage(const char *); + static void setStatusMessage(progmem_str); + static void onRedraw(draw_mode_t); + static void onStartup(); + static void onEntry(); + static void onIdle(); + static bool onTouchEnd(uint8_t tag); +}; +#else + class StatusScreen : public BaseScreen, public CachedScreen { + private: + static float increment; + static bool jog_xy; + static bool fine_motion; + + static void draw_temperature(draw_mode_t what); + static void draw_syringe(draw_mode_t what); + static void draw_arrows(draw_mode_t what); + static void draw_overlay_icons(draw_mode_t what); + static void draw_fine_motion(draw_mode_t what); + static void draw_buttons(draw_mode_t what); + public: + static void unlockMotors(); + + static void setStatusMessage(const char *); + static void setStatusMessage(progmem_str); + + static void onStartup(); + static void onRedraw(draw_mode_t); + + static bool onTouchStart(uint8_t tag); + static bool onTouchHeld(uint8_t tag); + static bool onTouchEnd(uint8_t tag); + static void onIdle(); + + }; + + class BioPrintingDialogBox : public BaseScreen, public CachedScreen { + private: + static void draw_status_message(draw_mode_t, const char * const); + static void draw_progress(draw_mode_t); + static void draw_time_remaining(draw_mode_t); + static void draw_interaction_buttons(draw_mode_t); + public: + static void onRedraw(draw_mode_t); + + static void show(); + + static void setStatusMessage(const char *); + static void setStatusMessage(progmem_str); + + static void onIdle(); + static bool onTouchEnd(uint8_t tag); + }; + + class BioConfirmHomeXYZ : public DialogBoxBaseClass, public UncachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + }; + + class BioConfirmHomeE : public DialogBoxBaseClass, public UncachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + }; +#endif + +class MainMenu : public BaseScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); +}; + +class TuneMenu : public BaseScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); +}; + +class TouchCalibrationScreen : public BaseScreen, public UncachedScreen { + public: + static void onRefresh(); + static void onEntry(); + static void onRedraw(draw_mode_t); + static void onIdle(); +}; + +class TouchRegistersScreen : public BaseScreen, public UncachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); +}; + +class AdvancedSettingsMenu : public BaseScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); +}; + +class ChangeFilamentScreen : public BaseScreen, public CachedScreen { + private: + static uint8_t getSoftenTemp(); + static ExtUI::extruder_t getExtruder(); + static void drawTempGradient(uint16_t x, uint16_t y, uint16_t w, uint16_t h); + static uint32_t getTempColor(uint32_t temp); + public: + static void onEntry(); + static void onExit(); + static void onRedraw(draw_mode_t); + static bool onTouchStart(uint8_t tag); + static bool onTouchEnd(uint8_t tag); + static bool onTouchHeld(uint8_t tag); + static void onIdle(); +}; + +class BaseNumericAdjustmentScreen : public BaseScreen { + public: + enum precision_default_t { + DEFAULT_LOWEST, + DEFAULT_MIDRANGE, + DEFAULT_HIGHEST + }; + + protected: + class widgets_t { + private: + draw_mode_t _what; + uint8_t _line; + uint32_t _color; + uint8_t _decimals; + const char *_units; + + protected: + void _draw_increment_btn(uint8_t line, const uint8_t tag); + + public: + widgets_t(draw_mode_t); + + widgets_t &color(uint32_t color) {_color = color; return *this;} + widgets_t &units(const char *units) {_units = units; return *this;} + widgets_t &draw_mode(draw_mode_t what) {_what = what; return *this;} + widgets_t &precision(uint8_t decimals, precision_default_t = DEFAULT_HIGHEST); + + void heading (const char *label); + void adjuster_sram_val (uint8_t tag, const char *label, const char *value, bool is_enabled = true); + void adjuster (uint8_t tag, const char *label, const char *value, bool is_enabled = true); + void adjuster (uint8_t tag, const char *label, float value=0, bool is_enabled = true); + void button (uint8_t tag, const char *label, bool is_enabled = true); + void text_field (uint8_t tag, const char *label, const char *value, bool is_enabled = true); + void two_buttons (uint8_t tag1, const char *label1, + uint8_t tag2, const char *label2, bool is_enabled = true); + void toggle (uint8_t tag, const char *label, const char *text, bool value, bool is_enabled = true); + void home_buttons (uint8_t tag); + void increments (); + }; + + static float getIncrement(); + + public: + static void onEntry(); + static bool onTouchEnd(uint8_t tag); +}; + +class MoveAxisScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + private: + static float getManualFeedrate(uint8_t axis, float increment_mm); + public: + static void setManualFeedrate(ExtUI::axis_t, float increment_mm); + static void setManualFeedrate(ExtUI::extruder_t, float increment_mm); + + static void onEntry(); + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); + static void onIdle(); +}; + +class StepsScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); +}; + +#if HAS_TRINAMIC + class StepperCurrentScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); + }; + + class StepperBumpSensitivityScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); + }; +#endif + +#if HAS_BED_PROBE + class ZOffsetScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); + }; +#endif + +#if HOTENDS > 1 + class NozzleOffsetScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onEntry(); + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); + }; +#endif + +#if ENABLED(BABYSTEPPING) + class NudgeNozzleScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onEntry(); + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + static bool onTouchHeld(uint8_t tag); + static void onIdle(); + }; +#endif + +#if ENABLED(BACKLASH_GCODE) + class BacklashCompensationScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); + }; +#endif + +class FeedratePercentScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); +}; + +class MaxVelocityScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); +}; + +class MaxAccelerationScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); +}; + +class DefaultAccelerationScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); +}; + +#if ENABLED(JUNCTION_DEVIATION) + class JunctionDeviationScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); + }; +#else + class JerkScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); + }; +#endif + +#if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR) + class FilamentMenu : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + }; +#endif + +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + class FilamentRunoutScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); + }; +#endif + +#if ENABLED(LIN_ADVANCE) + class LinearAdvanceScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); + }; +#endif + +class TemperatureScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); +}; + +class InterfaceSoundsScreen : public BaseScreen, public CachedScreen { + public: + enum event_t { + PRINTING_STARTED = 0, + PRINTING_FINISHED = 1, + PRINTING_FAILED = 2, + + NUM_EVENTS + }; + + private: + friend class InterfaceSettingsScreen; + + static uint8_t event_sounds[NUM_EVENTS]; + + static const char* getSoundSelection(event_t); + static void toggleSoundSelection(event_t); + static void setSoundSelection(event_t, const FTDI::SoundPlayer::sound_t*); + + public: + static void playEventSound(event_t, FTDI::play_mode_t = FTDI::PLAY_ASYNCHRONOUS); + + static void defaultSettings(); + + static void onEntry(); + static void onRedraw(draw_mode_t); + static bool onTouchStart(uint8_t tag); + static bool onTouchEnd(uint8_t tag); + static void onIdle(); +}; + +class InterfaceSettingsScreen : public BaseScreen, public CachedScreen { + private: + struct persistent_data_t { + uint32_t touch_transform_a; + uint32_t touch_transform_b; + uint32_t touch_transform_c; + uint32_t touch_transform_d; + uint32_t touch_transform_e; + uint32_t touch_transform_f; + uint16_t passcode; + uint8_t display_brightness; + int8_t display_h_offset_adj; + int8_t display_v_offset_adj; + uint8_t sound_volume; + uint8_t bit_flags; + uint8_t event_sounds[InterfaceSoundsScreen::NUM_EVENTS]; + }; + + public: + #ifdef LULZBOT_EEPROM_BACKUP_SIZE + static bool backupEEPROM(); + #endif + + static void saveSettings(char *); + static void loadSettings(const char *); + static void defaultSettings(); + static void failSafeSettings(); + + static void onStartup(); + static void onEntry(); + static void onRedraw(draw_mode_t); + static bool onTouchStart(uint8_t tag); + static bool onTouchEnd(uint8_t tag); + static void onIdle(); +}; + +class LockScreen : public BaseScreen, public CachedScreen { + private: + friend InterfaceSettingsScreen; + + static uint16_t passcode; + + static char & message_style(); + static uint16_t compute_checksum(); + static void onPasscodeEntered(); + public: + static bool is_enabled(); + static void check_passcode(); + static void enable(); + static void disable(); + + static void set_hash(uint16_t pass) {passcode = pass;}; + static uint16_t get_hash() {return passcode;}; + + static void onEntry(); + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); +}; + +class FilesScreen : public BaseScreen, public CachedScreen { + private: + #ifdef TOUCH_UI_PORTRAIT + static constexpr uint8_t header_h = 2; + static constexpr uint8_t footer_h = 2; + static constexpr uint8_t files_per_page = 11; + #else + static constexpr uint8_t header_h = 1; + static constexpr uint8_t footer_h = 1; + static constexpr uint8_t files_per_page = 6; + #endif + + static uint8_t getTagForLine(uint8_t line) {return line + 2;} + static uint8_t getLineForTag(uint8_t tag) {return tag - 2;} + static uint16_t getFileForTag(uint8_t tag); + + static const char *getSelectedShortFilename(); + static const char *getSelectedLongFilename(); + + static void drawFileButton(const char* filename, uint8_t tag, bool is_dir, bool is_highlighted); + static void drawFileList(); + static void drawHeader(); + static void drawFooter(); + static void drawSelectedFile(); + + static void gotoPage(uint8_t); + public: + static void onEntry(); + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + static void onIdle(); +}; + +class EndstopStatesScreen : public BaseScreen, public UncachedScreen { + public: + static void onEntry(); + static void onExit(); + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + static void onIdle(); +}; + +class DisplayTuningScreen : public BaseNumericAdjustmentScreen, public CachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchHeld(uint8_t tag); +}; + +#if ENABLED(DEVELOPER_SCREENS) + class DeveloperMenu : public BaseScreen, public UncachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + }; + + class ConfirmEraseFlashDialogBox : public DialogBoxBaseClass, public UncachedScreen { + public: + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + }; + + class WidgetsScreen : public BaseScreen, public UncachedScreen { + public: + static void onEntry(); + static void onRedraw(draw_mode_t); + static bool onTouchStart(uint8_t tag); + static void onIdle(); + }; + + class StressTestScreen : public BaseScreen, public UncachedScreen { + private: + static void drawDots(uint16_t x, uint16_t y, uint16_t h, uint16_t v); + static bool watchDogTestNow(); + static void recursiveLockup(); + static void iterativeLockup(); + static void runTestOnBootup(bool enable); + + public: + static void startupCheck(); + + static void onEntry(); + static void onRedraw(draw_mode_t); + static bool onTouchEnd(uint8_t tag); + static void onIdle(); + }; +#endif + +class MediaPlayerScreen : public BaseScreen, public UncachedScreen { + private: + typedef int16_t media_streamer_func_t(void *obj, void *buff, size_t bytes); + + public: + static bool playCardMedia(); + static bool playBootMedia(); + + static void onEntry(); + static void onRedraw(draw_mode_t); + + static void playStream(void *obj, media_streamer_func_t*); +}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/spinner_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/spinner_dialog_box.cpp new file mode 100644 index 000000000..971bd5e5b --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/spinner_dialog_box.cpp @@ -0,0 +1,67 @@ +/************************** + * spinner_dialog_box.cpp * + **************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" +#include "screen_data.h" + +using namespace FTDI; +using namespace ExtUI; + +void SpinnerDialogBox::onRedraw(draw_mode_t) { +} + +void SpinnerDialogBox::show(const progmem_str message) { + drawMessage(message); + drawSpinner(); + storeBackground(); + screen_data.SpinnerDialogBox.auto_hide = false; +} + +void SpinnerDialogBox::hide() { + CommandProcessor cmd; + cmd.stop().execute(); +} + +void SpinnerDialogBox::enqueueAndWait_P(const progmem_str commands) { + enqueueAndWait_P(F("Please wait..."), commands); +} + +void SpinnerDialogBox::enqueueAndWait_P(const progmem_str message, const progmem_str commands) { + show(message); + GOTO_SCREEN(SpinnerDialogBox); + ExtUI::injectCommands_P((const char*)commands); + screen_data.SpinnerDialogBox.auto_hide = true; +} + +void SpinnerDialogBox::onIdle() { + if (screen_data.SpinnerDialogBox.auto_hide && !commandsInQueue()) { + screen_data.SpinnerDialogBox.auto_hide = false; + hide(); + GOTO_PREVIOUS(); + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/statistics_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/statistics_screen.cpp new file mode 100644 index 000000000..efc1cc38f --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/statistics_screen.cpp @@ -0,0 +1,77 @@ +/************************* + * statistics_screen.cpp * + *************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(PRINTCOUNTER) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +#define GRID_COLS 4 +#define GRID_ROWS 7 + +void StatisticsScreen::onRedraw(draw_mode_t what) { + CommandProcessor cmd; + + if (what & BACKGROUND) { + char buffer[21]; + + cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color)) + .cmd(CLEAR(true,true,true)) + .tag(0) + + .font(Theme::font_medium) + .text(BTN_POS(1,1), BTN_SIZE(4,1), F("Printer Statistics")) + .font(Theme::font_small) + .tag(0) + .text(BTN_POS(1,2), BTN_SIZE(2,1), F("Total Prints:"), OPT_RIGHTX | OPT_CENTERY) + .text(BTN_POS(1,3), BTN_SIZE(2,1), F("Finished Prints:"), OPT_RIGHTX | OPT_CENTERY) + .text(BTN_POS(1,4), BTN_SIZE(2,1), F("Total Print Time:"), OPT_RIGHTX | OPT_CENTERY) + .text(BTN_POS(1,5), BTN_SIZE(2,1), F("Longest Print:"), OPT_RIGHTX | OPT_CENTERY) + .text(BTN_POS(1,6), BTN_SIZE(2,1), F("Filament Used:"), OPT_RIGHTX | OPT_CENTERY); + // Don't chain the following, it causes strange issues with evaluation ordering! + cmd.text(BTN_POS(3,2), BTN_SIZE(2,1), getTotalPrints_str(buffer)); + cmd.text(BTN_POS(3,3), BTN_SIZE(2,1), getFinishedPrints_str(buffer)); + cmd.text(BTN_POS(3,4), BTN_SIZE(2,1), getTotalPrintTime_str(buffer)); + cmd.text(BTN_POS(3,5), BTN_SIZE(2,1), getLongestPrint_str(buffer)); + cmd.text(BTN_POS(3,6), BTN_SIZE(2,1), getFilamentUsed_str(buffer)); + } + + if (what & FOREGROUND) { + cmd.font(Theme::font_medium) + .colors(action_btn) + .tag(1).button(BTN_POS(1,7), BTN_SIZE(4,1), F("Back")); + } +} + +bool StatisticsScreen::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_PREVIOUS(); return true; + default: return false; + } +} + +#endif // LULZBOT_TOUCH_UI && PRINTCOUNTER diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/status_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/status_screen.cpp new file mode 100644 index 000000000..420ac2b43 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/status_screen.cpp @@ -0,0 +1,446 @@ +/********************* + * status_screen.cpp * + *********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && !defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" +#include "screen_data.h" + +#include "../archim2-flash/flash_storage.h" + +#if ENABLED(SDSUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP) + #include "../../../../../sd/cardreader.h" +#endif + +using namespace FTDI; +using namespace Theme; + +#ifdef TOUCH_UI_PORTRAIT + #define GRID_ROWS 8 +#else + #define GRID_ROWS 8 +#endif + +void StatusScreen::draw_axis_position(draw_mode_t what) { + CommandProcessor cmd; + + #define GRID_COLS 3 + + if (what & BACKGROUND) { + cmd.tag(6) + #ifdef TOUCH_UI_PORTRAIT + .fgcolor(Theme::axis_label) + .font(Theme::font_large) + .button( BTN_POS(1,5), BTN_SIZE(2,1), F(""), OPT_FLAT) + .button( BTN_POS(1,6), BTN_SIZE(2,1), F(""), OPT_FLAT) + .button( BTN_POS(1,7), BTN_SIZE(2,1), F(""), OPT_FLAT) + + .font(Theme::font_small) + .text ( BTN_POS(1,5), BTN_SIZE(1,1), F("X")) + .text ( BTN_POS(1,6), BTN_SIZE(1,1), F("Y")) + .text ( BTN_POS(1,7), BTN_SIZE(1,1), F("Z")) + + .font(Theme::font_medium) + .fgcolor(Theme::x_axis) .button( BTN_POS(2,5), BTN_SIZE(2,1), F(""), OPT_FLAT) + .fgcolor(Theme::y_axis) .button( BTN_POS(2,6), BTN_SIZE(2,1), F(""), OPT_FLAT) + .fgcolor(Theme::z_axis) .button( BTN_POS(2,7), BTN_SIZE(2,1), F(""), OPT_FLAT); + #else + .fgcolor(Theme::axis_label) + .font(Theme::font_large) + .button( BTN_POS(1,5), BTN_SIZE(1,2), F(""), OPT_FLAT) + .button( BTN_POS(2,5), BTN_SIZE(1,2), F(""), OPT_FLAT) + .button( BTN_POS(3,5), BTN_SIZE(1,2), F(""), OPT_FLAT) + + .font(Theme::font_small) + .text ( BTN_POS(1,5), BTN_SIZE(1,1), F("X")) + .text ( BTN_POS(2,5), BTN_SIZE(1,1), F("Y")) + .text ( BTN_POS(3,5), BTN_SIZE(1,1), F("Z")) + .font(Theme::font_medium) + + .fgcolor(Theme::x_axis) .button( BTN_POS(1,6), BTN_SIZE(1,1), F(""), OPT_FLAT) + .fgcolor(Theme::y_axis) .button( BTN_POS(2,6), BTN_SIZE(1,1), F(""), OPT_FLAT) + .fgcolor(Theme::z_axis) .button( BTN_POS(3,6), BTN_SIZE(1,1), F(""), OPT_FLAT); + #endif + } + + if (what & FOREGROUND) { + using namespace ExtUI; + char x_str[15]; + char y_str[15]; + char z_str[15]; + + if (isAxisPositionKnown(X)) { + dtostrf(getAxisPosition_mm(X), 5, 1, x_str); + strcat_P(x_str, PSTR(" mm")); + } else { + strcpy_P(x_str, PSTR("?")); + } + + if (isAxisPositionKnown(Y)) { + dtostrf(getAxisPosition_mm(Y), 5, 1, y_str); + strcat_P(y_str, PSTR(" mm")); + } else { + strcpy_P(y_str, PSTR("?")); + } + + if (isAxisPositionKnown(Z)) { + dtostrf(getAxisPosition_mm(Z), 5, 1, z_str); + strcat_P(z_str, PSTR(" mm")); + } else { + strcpy_P(z_str, PSTR("?")); + } + + cmd.tag(6).font(Theme::font_medium) + #ifdef TOUCH_UI_PORTRAIT + .text ( BTN_POS(2,5), BTN_SIZE(2,1), x_str) + .text ( BTN_POS(2,6), BTN_SIZE(2,1), y_str) + .text ( BTN_POS(2,7), BTN_SIZE(2,1), z_str); + #else + .text ( BTN_POS(1,6), BTN_SIZE(1,1), x_str) + .text ( BTN_POS(2,6), BTN_SIZE(1,1), y_str) + .text ( BTN_POS(3,6), BTN_SIZE(1,1), z_str); + #endif + } + + #undef GRID_COLS +} + +#ifdef TOUCH_UI_PORTRAIT + #define GRID_COLS 8 +#else + #define GRID_COLS 12 +#endif + +void StatusScreen::draw_temperature(draw_mode_t what) { + using namespace Theme; + + CommandProcessor cmd; + + if (what & BACKGROUND) { + cmd.font(Theme::font_small) + #ifdef TOUCH_UI_PORTRAIT + .tag(5) + .fgcolor(temp) .button( BTN_POS(1,1), BTN_SIZE(4,2), F(""), OPT_FLAT) + .button( BTN_POS(1,1), BTN_SIZE(8,1), F(""), OPT_FLAT) + .fgcolor(fan_speed) .button( BTN_POS(5,2), BTN_SIZE(4,1), F(""), OPT_FLAT) + .tag(0) + .fgcolor(progress) .button( BTN_POS(1,3), BTN_SIZE(4,1), F(""), OPT_FLAT) + .button( BTN_POS(5,3), BTN_SIZE(4,1), F(""), OPT_FLAT); + #else + .tag(5) + .fgcolor(temp) .button( BTN_POS(1,1), BTN_SIZE(4,2), F(""), OPT_FLAT) + .button( BTN_POS(1,1), BTN_SIZE(8,1), F(""), OPT_FLAT) + .fgcolor(fan_speed) .button( BTN_POS(5,2), BTN_SIZE(4,1), F(""), OPT_FLAT) + .tag(0) + .fgcolor(progress) .button( BTN_POS(9,1), BTN_SIZE(4,1), F(""), OPT_FLAT) + .button( BTN_POS(9,2), BTN_SIZE(4,1), F(""), OPT_FLAT); + #endif + + // Draw Extruder Bitmap on Extruder Temperature Button + + cmd.tag(5) + .cmd(BITMAP_SOURCE(Extruder_Icon_Info)) + .cmd(BITMAP_LAYOUT(Extruder_Icon_Info)) + .cmd(BITMAP_SIZE (Extruder_Icon_Info)) + .icon (BTN_POS(1,1), BTN_SIZE(1,1), Extruder_Icon_Info, icon_scale) + .icon (BTN_POS(5,1), BTN_SIZE(1,1), Extruder_Icon_Info, icon_scale); + + // Draw Bed Heat Bitmap on Bed Heat Button + cmd.cmd(BITMAP_SOURCE(Bed_Heat_Icon_Info)) + .cmd(BITMAP_LAYOUT(Bed_Heat_Icon_Info)) + .cmd(BITMAP_SIZE (Bed_Heat_Icon_Info)) + .icon (BTN_POS(1,2), BTN_SIZE(1,1), Bed_Heat_Icon_Info, icon_scale); + + // Draw Fan Percent Bitmap on Bed Heat Button + + cmd.cmd(BITMAP_SOURCE(Fan_Icon_Info)) + .cmd(BITMAP_LAYOUT(Fan_Icon_Info)) + .cmd(BITMAP_SIZE (Fan_Icon_Info)) + .icon (BTN_POS(5,2), BTN_SIZE(1,1), Fan_Icon_Info, icon_scale); + } + + if (what & FOREGROUND) { + using namespace ExtUI; + char e0_str[15]; + char e1_str[15]; + char bed_str[15]; + char fan_str[15]; + + sprintf_P( + fan_str, + PSTR("%-3d %%"), + int8_t(getActualFan_percent(FAN0)) + ); + + const char *idle = PSTR("%-3d C / idle"); + const char *not_idle = PSTR("%-3d / %-3d C"); + + sprintf_P( + bed_str, + isHeaterIdle(BED) ? idle : not_idle, + ROUND(getActualTemp_celsius(BED)), + ROUND(getTargetTemp_celsius(BED)) + ); + + sprintf_P( + e0_str, + isHeaterIdle(H0) ? idle : not_idle, + ROUND(getActualTemp_celsius(H0)), + ROUND(getTargetTemp_celsius(H0)) + ); + + #if EXTRUDERS == 2 + sprintf_P( + e1_str, + isHeaterIdle(H1) ? idle : not_idle, + ROUND(getActualTemp_celsius(H1)), + ROUND(getTargetTemp_celsius(H1)) + ); + #else + strcpy_P( + e1_str, + PSTR("-") + ); + #endif + + cmd.tag(5) + .font(font_medium) + .text(BTN_POS(2,1), BTN_SIZE(3,1), e0_str) + .text(BTN_POS(6,1), BTN_SIZE(3,1), e1_str) + .text(BTN_POS(2,2), BTN_SIZE(3,1), bed_str) + .text(BTN_POS(6,2), BTN_SIZE(3,1), fan_str); + } +} + +void StatusScreen::draw_progress(draw_mode_t what) { + using namespace ExtUI; + using namespace Theme; + + CommandProcessor cmd; + + if (what & BACKGROUND) { + cmd.tag(0).font(font_medium) + #ifdef TOUCH_UI_PORTRAIT + .fgcolor(progress) .button(BTN_POS(1,3), BTN_SIZE(4,1), F(""), OPT_FLAT) + .button(BTN_POS(5,3), BTN_SIZE(4,1), F(""), OPT_FLAT); + #else + .fgcolor(progress) .button(BTN_POS(9,1), BTN_SIZE(4,1), F(""), OPT_FLAT) + .button(BTN_POS(9,2), BTN_SIZE(4,1), F(""), OPT_FLAT); + #endif + } + + if (what & FOREGROUND) { + const uint32_t elapsed = getProgress_seconds_elapsed(); + const uint8_t hrs = elapsed/3600; + const uint8_t min = (elapsed/60)%60; + + char time_str[10]; + char progress_str[10]; + + sprintf_P(time_str, PSTR(" %02d : %02d"), hrs, min); + sprintf_P(progress_str, PSTR("%-3d %%"), getProgress_percent() ); + + cmd.font(font_medium) + #ifdef TOUCH_UI_PORTRAIT + .tag(0).text(BTN_POS(1,3), BTN_SIZE(4,1), time_str) + .text(BTN_POS(5,3), BTN_SIZE(4,1), progress_str); + #else + .tag(0).text(BTN_POS(9,1), BTN_SIZE(4,1), time_str) + .text(BTN_POS(9,2), BTN_SIZE(4,1), progress_str); + #endif + } +} + +#undef GRID_COLS + + +void StatusScreen::draw_interaction_buttons(draw_mode_t what) { + #define GRID_COLS 4 + if (what & FOREGROUND) { + using namespace ExtUI; + + const bool has_media = isMediaInserted() && !isPrintingFromMedia(); + + CommandProcessor cmd; + cmd.colors(normal_btn) + .font(Theme::font_medium) + #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP) + .enabled(!Sd2Card::ready() || has_media) + #else + .enabled(has_media) + #endif + .colors(has_media ? action_btn : normal_btn) + #ifdef TOUCH_UI_PORTRAIT + .tag(3).button( BTN_POS(1,8), BTN_SIZE(2,1), + #else + .tag(3).button( BTN_POS(1,7), BTN_SIZE(2,2), + #endif + isPrintingFromMedia() ? F("Printing") : + #if ENABLED(USB_FLASH_DRIVE_SUPPORT) + #ifdef LULZBOT_MANUAL_USB_STARTUP + (Sd2Card::ready() ? F("USB Drive") : F("Enable USB")) + #else + F("USB Drive") + #endif + ) + #else + F("SD Card")) + #endif + .colors(!has_media ? action_btn : normal_btn) + #ifdef TOUCH_UI_PORTRAIT + .tag(4).button( BTN_POS(3,8), BTN_SIZE(2,1), F("MENU")); + #else + .tag(4).button( BTN_POS(3,7), BTN_SIZE(2,2), F("MENU")); + #endif + } + #undef GRID_COLS +} + +void StatusScreen::draw_status_message(draw_mode_t what, const char* message) { + #define GRID_COLS 1 + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.fgcolor(Theme::status_msg) + .tag(0) + #ifdef TOUCH_UI_PORTRAIT + .button( BTN_POS(1,4), BTN_SIZE(1,1), F(""), OPT_FLAT); + #else + .button( BTN_POS(1,3), BTN_SIZE(1,2), F(""), OPT_FLAT); + #endif + + draw_text_box(cmd, + #ifdef TOUCH_UI_PORTRAIT + BTN_POS(1,4), BTN_SIZE(1,1), + #else + BTN_POS(1,3), BTN_SIZE(1,2), + #endif + message, OPT_CENTER, font_large); + } + #undef GRID_COLS +} + +void StatusScreen::setStatusMessage(progmem_str message) { + char buff[strlen_P((const char * const)message)+1]; + strcpy_P(buff, (const char * const) message); + setStatusMessage((const char *) buff); +} + +void StatusScreen::setStatusMessage(const char* message) { + CommandProcessor cmd; + cmd.cmd(CMD_DLSTART) + .cmd(CLEAR_COLOR_RGB(Theme::bg_color)) + .cmd(CLEAR(true,true,true)); + + draw_temperature(BACKGROUND); + draw_progress(BACKGROUND); + draw_axis_position(BACKGROUND); + draw_status_message(BACKGROUND, message); + draw_interaction_buttons(BACKGROUND); + storeBackground(); + + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("New status message: ", message); + #endif + + if (AT_SCREEN(StatusScreen)) { + current_screen.onRefresh(); + } +} + +void StatusScreen::onStartup() { + // Load the bitmaps for the status screen + + using namespace Theme; + constexpr uint32_t base = ftdi_memory_map::RAM_G; + CLCD::mem_write_pgm(base + TD_Icon_Info.RAMG_offset, TD_Icon, sizeof(TD_Icon)); + CLCD::mem_write_pgm(base + Extruder_Icon_Info.RAMG_offset, Extruder_Icon, sizeof(Extruder_Icon)); + CLCD::mem_write_pgm(base + Bed_Heat_Icon_Info.RAMG_offset, Bed_Heat_Icon, sizeof(Bed_Heat_Icon)); + CLCD::mem_write_pgm(base + Fan_Icon_Info.RAMG_offset, Fan_Icon, sizeof(Fan_Icon)); + + setStatusMessage(F(WELCOME_MSG)); + + UIFlashStorage::initialize(); +} + +void StatusScreen::onRedraw(draw_mode_t what) { + if (what & FOREGROUND) { + draw_temperature(FOREGROUND); + draw_progress(FOREGROUND); + draw_axis_position(FOREGROUND); + draw_interaction_buttons(FOREGROUND); + } +} + +void StatusScreen::onEntry() { + onRefresh(); +} + +void StatusScreen::onIdle() { + if (refresh_timer.elapsed(STATUS_UPDATE_INTERVAL)) { + onRefresh(); + refresh_timer.start(); + } + BaseScreen::onIdle(); +} + +bool StatusScreen::onTouchEnd(uint8_t tag) { + using namespace ExtUI; + + switch (tag) { + case 3: + #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP) + if (!Sd2Card::ready()) { + StatusScreen::setStatusMessage(F("Insert USB drive...")); + Sd2Card::usbStartup(); + } else { + GOTO_SCREEN(FilesScreen); + } + #else + GOTO_SCREEN(FilesScreen); + #endif + break; + case 4: + if (isPrinting()) { + GOTO_SCREEN(TuneMenu); + } else { + GOTO_SCREEN(MainMenu); + } + break; + case 5: GOTO_SCREEN(TemperatureScreen); break; + case 6: + if (!isPrinting()) { + GOTO_SCREEN(MoveAxisScreen); + } + break; + default: + return true; + } + // If a passcode is enabled, the LockScreen will prevent the + // user from proceeding. + LockScreen::check_passcode(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_bump_sensitivity_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_bump_sensitivity_screen.cpp new file mode 100644 index 000000000..651bfa8d5 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_bump_sensitivity_screen.cpp @@ -0,0 +1,77 @@ +/************************************** + * stepper_bump_sensiivity_screen.cpp * + **************************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && HAS_TRINAMIC + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void StepperBumpSensitivityScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(0, BaseNumericAdjustmentScreen::DEFAULT_LOWEST); + w.heading( PSTR("TMC Bump Sensitivity")); + w.color(x_axis) .adjuster( 2, PSTR("X:"), getTMCBumpSensitivity(X), + #if X_SENSORLESS && AXIS_HAS_STALLGUARD(X) + true + #else + false + #endif + ); + w.color(y_axis) .adjuster( 4, PSTR("Y:"), getTMCBumpSensitivity(Y), + #if Y_SENSORLESS && AXIS_HAS_STALLGUARD(Y) + true + #else + false + #endif + ); + w.color(z_axis) .adjuster( 6, PSTR("Z:"), getTMCBumpSensitivity(Z), + #if Z_SENSORLESS && AXIS_HAS_STALLGUARD(Z) + true + #else + false + #endif + ); + w.increments(); +} + +bool StepperBumpSensitivityScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(TMCBumpSensitivity, X ); break; + case 3: UI_INCREMENT(TMCBumpSensitivity, X ); break; + case 4: UI_DECREMENT(TMCBumpSensitivity, Y ); break; + case 5: UI_INCREMENT(TMCBumpSensitivity, Y ); break; + case 6: UI_DECREMENT(TMCBumpSensitivity, Z ); break; + case 7: UI_INCREMENT(TMCBumpSensitivity, Z ); break; + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI && HAS_TRINAMIC diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_current_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_current_screen.cpp new file mode 100644 index 000000000..edeed6825 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_current_screen.cpp @@ -0,0 +1,86 @@ +/****************************** + * stepper_current_screen.cpp * + ******************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && HAS_TRINAMIC + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void StepperCurrentScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(0); + w.units(PSTR("mA")); + w.heading( PSTR("Stepper Current")); + w.color(x_axis) .adjuster( 2, PSTR("X:"), getAxisCurrent_mA(X) ); + w.color(y_axis) .adjuster( 4, PSTR("Y:"), getAxisCurrent_mA(Y) ); + w.color(z_axis) .adjuster( 6, PSTR("Z:"), getAxisCurrent_mA(Z) ); + #if EXTRUDERS == 1 + w.color(e_axis).adjuster( 8, PSTR("E:"), getAxisCurrent_mA(E0) ); + #elif EXTRUDERS > 1 + w.color(e_axis).adjuster( 8, PSTR("E1:"), getAxisCurrent_mA(E0) ); + w.color(e_axis).adjuster(10, PSTR("E2:"), getAxisCurrent_mA(E1) ); + #if EXTRUDERS > 2 + w.color(e_axis).adjuster(12, PSTR("E3:"), getAxisCurrent_mA(E2) ); + #endif + #if EXTRUDERS > 3 + w.color(e_axis).adjuster(14, PSTR("E4:"), getAxisCurrent_mA(E3) ); + #endif + #endif + w.increments(); +} + +bool StepperCurrentScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(AxisCurrent_mA, X ); break; + case 3: UI_INCREMENT(AxisCurrent_mA, X ); break; + case 4: UI_DECREMENT(AxisCurrent_mA, Y ); break; + case 5: UI_INCREMENT(AxisCurrent_mA, Y ); break; + case 6: UI_DECREMENT(AxisCurrent_mA, Z ); break; + case 7: UI_INCREMENT(AxisCurrent_mA, Z ); break; + case 8: UI_DECREMENT(AxisCurrent_mA, E0); break; + case 9: UI_INCREMENT(AxisCurrent_mA, E0); break; + #if EXTRUDERS > 1 + case 10: UI_DECREMENT(AxisCurrent_mA, E1); break; + case 11: UI_INCREMENT(AxisCurrent_mA, E1); break; + #endif + #if EXTRUDERS > 2 + case 12: UI_DECREMENT(AxisCurrent_mA, E2); break; + case 13: UI_INCREMENT(AxisCurrent_mA, E2); break; + #endif + #if EXTRUDERS > 3 + case 14: UI_DECREMENT(AxisCurrent_mA, E3); break; + case 15: UI_INCREMENT(AxisCurrent_mA, E3); break; + #endif + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/steps_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/steps_screen.cpp new file mode 100644 index 000000000..f368b3b42 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/steps_screen.cpp @@ -0,0 +1,86 @@ +/******************** + * steps_screen.cpp * + ********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void StepsScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(0); + w.units(PSTR("st/mm")); + w.heading( PSTR("Steps/mm")); + w.color(x_axis) .adjuster( 2, PSTR("X:"), getAxisSteps_per_mm(X) ); + w.color(y_axis) .adjuster( 4, PSTR("Y:"), getAxisSteps_per_mm(Y) ); + w.color(z_axis) .adjuster( 6, PSTR("Z:"), getAxisSteps_per_mm(Z) ); + #if EXTRUDERS == 1 || DISABLED(DISTINCT_E_FACTORS) + w.color(e_axis) .adjuster( 8, PSTR("E:"), getAxisSteps_per_mm(E0) ); + #elif EXTRUDERS > 1 + w.color(e_axis) .adjuster( 8, PSTR("E1:"), getAxisSteps_per_mm(E0) ); + w.color(e_axis) .adjuster(10, PSTR("E2:"), getAxisSteps_per_mm(E1) ); + #if EXTRUDERS > 2 + w.color(e_axis) .adjuster(12, PSTR("E3:"), getAxisSteps_per_mm(E2) ); + #endif + #if EXTRUDERS > 3 + w.color(e_axis) .adjuster(14, PSTR("E4:"), getAxisSteps_per_mm(E3) ); + #endif + #endif + w.increments(); +} + +bool StepsScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 2: UI_DECREMENT(AxisSteps_per_mm, X); break; + case 3: UI_INCREMENT(AxisSteps_per_mm, X); break; + case 4: UI_DECREMENT(AxisSteps_per_mm, Y); break; + case 5: UI_INCREMENT(AxisSteps_per_mm, Y); break; + case 6: UI_DECREMENT(AxisSteps_per_mm, Z); break; + case 7: UI_INCREMENT(AxisSteps_per_mm, Z); break; + case 8: UI_DECREMENT(AxisSteps_per_mm, E0); break; + case 9: UI_INCREMENT(AxisSteps_per_mm, E0); break; + #if EXTRUDERS > 1 + case 10: UI_DECREMENT(AxisSteps_per_mm, E1); break; + case 11: UI_INCREMENT(AxisSteps_per_mm, E1); break; + #endif + #if EXTRUDERS > 2 + case 12: UI_DECREMENT(AxisSteps_per_mm, E2); break; + case 13: UI_INCREMENT(AxisSteps_per_mm, E2); break; + #endif + #if EXTRUDERS > 3 + case 14: UI_DECREMENT(AxisSteps_per_mm, E3); break; + case 15: UI_INCREMENT(AxisSteps_per_mm, E3); break; + #endif + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stress_test_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stress_test_screen.cpp new file mode 100644 index 000000000..5ef833147 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stress_test_screen.cpp @@ -0,0 +1,151 @@ +/************************** + * stress_test_screen.cpp * + **************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS) + +#include "screens.h" +#include "screen_data.h" + +#define STRESS_TEST_CHANGE_INTERVAL 6000 + +#define GRID_COLS 4 +#define GRID_ROWS 9 + +using namespace FTDI; +using namespace Theme; +using namespace ExtUI; + +void StressTestScreen::drawDots(uint16_t x, uint16_t y, uint16_t w, uint16_t h) { + CommandProcessor cmd; + for(uint8_t i = 0; i < 100; i++) { + cmd.cmd(BEGIN(POINTS)) + .cmd(POINT_SIZE(20*16)) + .cmd(COLOR_RGB(random(0xFFFFFF))) + .cmd(VERTEX2F((x + random(w)) * 16,(y + random(h)) * 16)); + } +} + +bool StressTestScreen::watchDogTestNow() { + return screen_data.StressTestScreen.next_watchdog_trigger && + ELAPSED(millis(), screen_data.StressTestScreen.next_watchdog_trigger); +} + +void StressTestScreen::onRedraw(draw_mode_t) { + using namespace ExtUI; + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .cmd(COLOR_RGB(bg_text_enabled)) + .font(font_medium) + .text(BTN_POS(1,1), BTN_SIZE(4,1), progmem_str(screen_data.StressTestScreen.message)); + + drawDots(BTN_POS(1,3), BTN_SIZE(4,4)); + + cmd.font(font_medium).enabled(!watchDogTestNow()).colors(action_btn).tag(1).button(BTN_POS(2,8), BTN_SIZE(2,1), F("Exit")); +} + +bool StressTestScreen::onTouchEnd(uint8_t tag) { + CommandProcessor cmd; + switch (tag) { + case 1: + runTestOnBootup(false); + GOTO_SCREEN(StatusScreen); + break; + default: + return false; + } + return true; +} + +void StressTestScreen::runTestOnBootup(bool enable) { + // Use a magic value in passcode to indicate + // whether or not we need to re-run the test + // at startup. + LockScreen::set_hash(enable ? 0xDEAD : 0); + injectCommands_P(PSTR("M500")); +} + +void StressTestScreen::startupCheck() { + if (LockScreen::get_hash() == 0xDEAD) { + GOTO_SCREEN(StressTestScreen); + } +} + +void StressTestScreen::onEntry() { + screen_data.StressTestScreen.next_watchdog_trigger = millis() + 10000 + random(40000); + screen_data.StressTestScreen.message = PSTR("Test 1: Stress testing..."); + + // Turn off heaters. + setTargetTemp_celsius(0, E0); + setTargetTemp_celsius(0, E1); + setTargetTemp_celsius(0, BED); + + runTestOnBootup(true); +} + +void StressTestScreen::recursiveLockup() { + screen_data.StressTestScreen.message = PSTR("Test 2: Printer will restart."); + current_screen.onRefresh(); + recursiveLockup(); +} + +void StressTestScreen::iterativeLockup() { + screen_data.StressTestScreen.message = PSTR("Test 3: Printer will restart."); + for(;;) current_screen.onRefresh(); +} + +void StressTestScreen::onIdle() { + current_screen.onRefresh(); + reset_menu_timeout(); + + if (!commandsInQueue()) { + if (!isPositionKnown()) { + injectCommands_P(PSTR("G28")); + } else { + injectCommands_P(PSTR( + "G0 X100 Y100 Z100 F6000\n" + "T0\nG4 S1" + #if EXTRUDERS > 1 + "\nT1\nG4 S1" + #endif + "\nG0 X150 Y150 Z150" + )); + } + } + + if (refresh_timer.elapsed(STRESS_TEST_CHANGE_INTERVAL)) { + setTargetFan_percent(random(100),FAN0); + } + + if (watchDogTestNow()) { + if (random(2) % 2) + iterativeLockup(); + else + recursiveLockup(); + } + + BaseScreen::onIdle(); +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/temperature_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/temperature_screen.cpp new file mode 100644 index 000000000..126562d01 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/temperature_screen.cpp @@ -0,0 +1,111 @@ +/******************* + * boot_screen.cpp * + *******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; +using namespace ExtUI; + +void TemperatureScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(0).color(temp).units(PSTR("C")); + w.heading( PSTR("Temperature:")); + w.button(30, PSTR("Cooldown (All Off)")); + #ifndef LULZBOT_DISABLE_TOOLHEAD_HEATER + #if HOTENDS == 1 + w.adjuster( 2, PSTR("Hot End:"), getTargetTemp_celsius(E0)); + #else + w.adjuster( 2, PSTR("Hot End 1:"), getTargetTemp_celsius(E0)); + w.adjuster( 4, PSTR("Hot End 2:"), getTargetTemp_celsius(E1)); + #if HOTENDS > 2 + w.adjuster( 6, PSTR("Hot End 3:"), getTargetTemp_celsius(E2)); + #endif + #if HOTENDS > 3 + w.adjuster( 8, PSTR("Hot End 4:"), getTargetTemp_celsius(E3)); + #endif + #endif + #endif + #if HAS_HEATED_BED + w.adjuster( 20, PSTR("Bed:"), getTargetTemp_celsius(BED)); + #endif + #if FAN_COUNT > 0 + w.color(fan_speed).units(PSTR("%")); + w.adjuster( 10, PSTR("Fan Speed:"), getTargetFan_percent(FAN0)); + #endif + w.increments(); +} + +bool TemperatureScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 20: UI_DECREMENT(TargetTemp_celsius, BED); break; + case 21: UI_INCREMENT(TargetTemp_celsius, BED); break; + #ifndef LULZBOT_DISABLE_TOOLHEAD_HEATER + case 2: UI_DECREMENT(TargetTemp_celsius, E0); break; + case 3: UI_INCREMENT(TargetTemp_celsius, E0); break; + #endif + #if HOTENDS > 1 + case 4: UI_DECREMENT(TargetTemp_celsius, E1); break; + case 5: UI_INCREMENT(TargetTemp_celsius, E1); break; + #endif + #if HOTENDS > 2 + case 6: UI_DECREMENT(TargetTemp_celsius, E2); break; + case 7: UI_INCREMENT(TargetTemp_celsius, E2); break; + #endif + #if HOTENDS > 3 + case 8: UI_DECREMENT(TargetTemp_celsius, E3); break; + case 9: UI_INCREMENT(TargetTemp_celsius, E3); break; + #endif + #if FAN_COUNT > 0 + case 10: UI_DECREMENT(TargetFan_percent, FAN0); break; + case 11: UI_INCREMENT(TargetFan_percent, FAN0); break; + #endif + case 30: + setTargetTemp_celsius(0,E0); + #if HOTENDS > 1 + setTargetTemp_celsius(0,E1); + #if HOTENDS > 2 + setTargetTemp_celsius(0,E2); + #if HOTENDS > 3 + setTargetTemp_celsius(0,E4); + #endif + #endif + #endif + #if HAS_HEATED_BED + setTargetTemp_celsius(0,BED); + #endif + #if FAN_COUNT > 0 + setTargetFan_percent(0,FAN0); + #endif + break; + default: + return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_calibration_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_calibration_screen.cpp new file mode 100644 index 000000000..0adf2885b --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_calibration_screen.cpp @@ -0,0 +1,116 @@ +/******************************** + * touch_calibration_screen.cpp * + ********************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; + +#define GRID_COLS 4 +#define GRID_ROWS 16 + +void TouchCalibrationScreen::onEntry() { + CommandProcessor cmd; + + BaseScreen::onEntry(); + + if (CLCD::is_touching()) { + // Ask the user to release the touch before starting, + // as otherwise the first calibration point could + // be misinterpreted. + cmd.cmd(CMD_DLSTART) + .cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .cmd(COLOR_RGB(bg_text_enabled)) + #ifdef TOUCH_UI_PORTRAIT + .font(font_large) + .text ( BTN_POS(1,8), BTN_SIZE(4,1), F("Release to begin")) + .text ( BTN_POS(1,9), BTN_SIZE(4,1), F("screen calibration")) + #else + .font( + #ifdef TOUCH_UI_800x480 + font_large + #else + font_medium + #endif + ) + .text ( BTN_POS(1,1), BTN_SIZE(4,16), F("Release to calibrate")) + #endif + .cmd(DL::DL_DISPLAY) + .cmd(CMD_SWAP) + .execute(); + + while (CLCD::is_touching()) { + #ifdef UI_FRAMEWORK_DEBUG + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Waiting for touch release"); + #endif + } + } + + // Force a refresh + cmd.cmd(CMD_DLSTART); + onRedraw(FOREGROUND); + cmd.cmd(DL::DL_DISPLAY); + cmd.execute(); +} + +void TouchCalibrationScreen::onRefresh() { + // Don't do the regular refresh, as this would + // cause the calibration be restarted on every + // touch. +} + +void TouchCalibrationScreen::onRedraw(draw_mode_t) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .cmd(COLOR_RGB(bg_text_enabled)) + + #ifdef TOUCH_UI_PORTRAIT + .font(font_large) + .text ( BTN_POS(1,8), BTN_SIZE(4,1), F("Touch the dots")) + .text ( BTN_POS(1,9), BTN_SIZE(4,1), F("to calibrate")) + #else + .font( + #ifdef TOUCH_UI_800x480 + font_large + #else + font_medium + #endif + ) + .text ( BTN_POS(1,1), BTN_SIZE(4,16), F("Touch the dots to calibrate")) + #endif + .cmd(CMD_CALIBRATE); +} + +void TouchCalibrationScreen::onIdle() { + if (!CLCD::is_touching() && !CommandProcessor::is_processing()) { + GOTO_PREVIOUS(); + } +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_registers_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_registers_screen.cpp new file mode 100644 index 000000000..4cb63077d --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_registers_screen.cpp @@ -0,0 +1,86 @@ +/****************************** + * touch_registers_screen.cpp * + ******************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; + +void TouchRegistersScreen::onRedraw(draw_mode_t) { + const uint32_t T_Transform_A = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_A); + const uint32_t T_Transform_B = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_B); + const uint32_t T_Transform_C = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_C); + const uint32_t T_Transform_D = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_D); + const uint32_t T_Transform_E = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_E); + const uint32_t T_Transform_F = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_F); + char b[20]; + + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .tag(0); + + #define GRID_ROWS 7 + #define GRID_COLS 2 + cmd.tag(0) + .font(font_xsmall) + .fgcolor(transformA) .button( BTN_POS(1,1), BTN_SIZE(1,1), F("TOUCH_XFORM_A")) + .fgcolor(transformB) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("TOUCH_XFORM_B")) + .fgcolor(transformC) .button( BTN_POS(1,3), BTN_SIZE(1,1), F("TOUCH_XFORM_C")) + .fgcolor(transformD) .button( BTN_POS(1,4), BTN_SIZE(1,1), F("TOUCH_XFORM_D")) + .fgcolor(transformE) .button( BTN_POS(1,5), BTN_SIZE(1,1), F("TOUCH_XFORM_E")) + .fgcolor(transformF) .button( BTN_POS(1,6), BTN_SIZE(1,1), F("TOUCH_XFORM_F")) + + .fgcolor(transformVal).button( BTN_POS(2,1), BTN_SIZE(1,1), F(""), OPT_FLAT) + .fgcolor(transformVal).button( BTN_POS(2,2), BTN_SIZE(1,1), F(""), OPT_FLAT) + .fgcolor(transformVal).button( BTN_POS(2,3), BTN_SIZE(1,1), F(""), OPT_FLAT) + .fgcolor(transformVal).button( BTN_POS(2,4), BTN_SIZE(1,1), F(""), OPT_FLAT) + .fgcolor(transformVal).button( BTN_POS(2,5), BTN_SIZE(1,1), F(""), OPT_FLAT) + .fgcolor(transformVal).button( BTN_POS(2,6), BTN_SIZE(1,1), F(""), OPT_FLAT); + + sprintf_P(b, PSTR("0x%08lX"), T_Transform_A); cmd.text( BTN_POS(2,1), BTN_SIZE(1,1), b); + sprintf_P(b, PSTR("0x%08lX"), T_Transform_B); cmd.text( BTN_POS(2,2), BTN_SIZE(1,1), b); + sprintf_P(b, PSTR("0x%08lX"), T_Transform_C); cmd.text( BTN_POS(2,3), BTN_SIZE(1,1), b); + sprintf_P(b, PSTR("0x%08lX"), T_Transform_D); cmd.text( BTN_POS(2,4), BTN_SIZE(1,1), b); + sprintf_P(b, PSTR("0x%08lX"), T_Transform_E); cmd.text( BTN_POS(2,5), BTN_SIZE(1,1), b); + sprintf_P(b, PSTR("0x%08lX"), T_Transform_F); cmd.text( BTN_POS(2,6), BTN_SIZE(1,1), b); + + cmd.colors(action_btn).font(font_medium) + .tag(1).button( BTN_POS(2,7), BTN_SIZE(1,1), F("Back")); + #undef GRID_COLS + #undef GRID_ROWS + } + + bool TouchRegistersScreen::onTouchEnd(uint8_t tag) { + switch (tag) { + case 1: GOTO_PREVIOUS(); break; + default: + return false; + } + return true; + } + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/tune_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/tune_menu.cpp new file mode 100644 index 000000000..37b60ed88 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/tune_menu.cpp @@ -0,0 +1,167 @@ +/******************* + * tune_menu.cpp * + *******************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && !defined(LULZBOT_USE_BIOPRINTER_UI) + +#include "screens.h" + +using namespace FTDI; +using namespace Theme; + +void TuneMenu::onRedraw(draw_mode_t what) { + if (what & BACKGROUND) { + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .font(font_medium); + } + + #ifdef TOUCH_UI_PORTRAIT + #define GRID_ROWS 8 + #define GRID_COLS 2 + #else + #define GRID_ROWS 4 + #define GRID_COLS 2 + #endif + + if (what & FOREGROUND) { + using namespace ExtUI; + + CommandProcessor cmd; + cmd.colors(normal_btn) + .font(font_medium) + #ifdef TOUCH_UI_PORTRAIT + .tag(2).enabled(1) .button( BTN_POS(1,1), BTN_SIZE(2,1), F("Temperature")) + .tag(3).enabled(!isPrinting()).button( BTN_POS(1,2), BTN_SIZE(2,1), F("Change Filament")) + #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR) + .enabled(1) + #else + .enabled(0) + #endif + .tag(9).button( BTN_POS(1,3), BTN_SIZE(2,1), F("Filament Options")) + #if ENABLED(BABYSTEPPING) + .tag(4).enabled(1) .button( BTN_POS(1,4), BTN_SIZE(2,1), F("Nudge Nozzle")) + #else + #if HAS_BED_PROBE + .enabled(1) + #else + .enabled(0) + #endif + .tag(4) .button( BTN_POS(1,4), BTN_SIZE(2,1), F("Adjust Z-Offset")) + #endif + .tag(5).enabled(1) .button( BTN_POS(1,5), BTN_SIZE(2,1), F("Print Speed")) + .tag(isPrintingFromMediaPaused() ? 7 : 6) + #if ENABLED(SDSUPPORT) + .enabled(isPrintingFromMedia()) + #else + .enabled(0) + #endif + .button( BTN_POS(1,6), BTN_SIZE(2,1), isPrintingFromMediaPaused() ? F("Resume Print") : F("Pause Print")) + #if ENABLED(SDSUPPORT) + .enabled(isPrintingFromMedia()) + #else + .enabled(0) + #endif + .tag(8) .button( BTN_POS(1,7), BTN_SIZE(2,1), F("Cancel Print")) + .tag(1).colors(action_btn) + .button( BTN_POS(1,8), BTN_SIZE(2,1), F("Back")); + #else // TOUCH_UI_PORTRAIT + .tag(2).enabled(1) .button( BTN_POS(1,1), BTN_SIZE(1,1), F("Temperature")) + .tag(3).enabled(!isPrinting()).button( BTN_POS(1,2), BTN_SIZE(1,1), F("Change Filament")) + #if ENABLED(BABYSTEPPING) + .enabled(1) + #else + .enabled(0) + #endif + #if ENABLED(BABYSTEPPING) + .tag(4) .button( BTN_POS(2,1), BTN_SIZE(1,1), F("Nudge Nozzle")) + #else + #if HAS_BED_PROBE + .enabled(1) + #else + .enabled(0) + #endif + .tag(4) .button( BTN_POS(1,4), BTN_SIZE(2,1), F("Adjust Z-Offset")) + #endif + .tag(5).enabled(1) .button( BTN_POS(2,2), BTN_SIZE(1,1), F("Print Speed")) + .tag(isPrintingFromMediaPaused() ? 7 : 6) + #if ENABLED(SDSUPPORT) + .enabled(isPrintingFromMedia()) + #else + .enabled(0) + #endif + .button( BTN_POS(1,3), BTN_SIZE(1,1), isPrintingFromMediaPaused() ? F("Resume Print") : F("Pause Print")) + #if ENABLED(SDSUPPORT) + .enabled(isPrintingFromMedia()) + #else + .enabled(0) + #endif + .tag(8). button( BTN_POS(2,3), BTN_SIZE(1,1), F("Cancel Print")) + #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR) + .enabled(1) + #else + .enabled(0) + #endif + .tag(9).button( BTN_POS(1,4), BTN_SIZE(1,1), F("Filament Options")) + .tag(1).colors(action_btn) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Back")); + #endif + } + #undef GRID_COLS + #undef GRID_ROWS +} + +bool TuneMenu::onTouchEnd(uint8_t tag) { + using namespace Theme; + using namespace ExtUI; + switch (tag) { + case 1: GOTO_PREVIOUS(); break; + case 2: GOTO_SCREEN(TemperatureScreen); break; + case 3: GOTO_SCREEN(ChangeFilamentScreen); break; + case 4: + #if ENABLED(BABYSTEPPING) + GOTO_SCREEN(NudgeNozzleScreen); + #else + #if HAS_BED_PROBE + GOTO_SCREEN(ZOffsetScreen); + #endif + #endif + break; + case 5: GOTO_SCREEN(FeedratePercentScreen); break; + case 6: sound.play(twinkle, PLAY_ASYNCHRONOUS); ExtUI::pausePrint(); GOTO_SCREEN(StatusScreen); break; + case 7: sound.play(twinkle, PLAY_ASYNCHRONOUS); ExtUI::resumePrint(); GOTO_SCREEN(StatusScreen); break; + case 8: + GOTO_SCREEN(ConfirmAbortPrintDialogBox); + current_screen.forget(); + PUSH_SCREEN(StatusScreen); + break; + #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR) + case 9: GOTO_SCREEN(FilamentMenu); break; + #endif + default: + return false; + } + return true; +} + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/widget_demo_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/widget_demo_screen.cpp new file mode 100644 index 000000000..a3988ed53 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/widget_demo_screen.cpp @@ -0,0 +1,158 @@ +/************************** + * widget_demo_screen.cpp * + **************************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS) + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +uint16_t slider_val; +bool show_grid; + +void WidgetsScreen::onEntry() { + BaseScreen::onEntry(); + CLCD::turn_on_backlight(); + SoundPlayer::set_volume(255); +} + +void WidgetsScreen::onRedraw(draw_mode_t) { + using namespace ExtUI; + CommandProcessor cmd; + cmd.cmd(CLEAR_COLOR_RGB(bg_color)) + .cmd(CLEAR(true,true,true)) + .cmd(COLOR_RGB(bg_text_enabled)) + .tag(0); + + const uint16_t hrs = (slider_val*12/0xFFFFU); + const uint16_t m = (slider_val*12*60/0xFFFFU)%60; + const uint16_t s = (slider_val*12*60*60/0xFFFFU)%60; + + #ifdef TOUCH_UI_PORTRAIT + #define GRID_COLS 3 + #define GRID_ROWS 8 + cmd.font(font_large) + .cmd(COLOR_RGB(bg_text_enabled)) + .text (BTN_POS(1,1), BTN_SIZE(3,1), F("Sample Widgets")) + .tag(0).text (BTN_POS(2,6), BTN_SIZE(1,1), F("Show grid:")) + .colors(ui_toggle) + .tag(2).dial (BTN_POS(1,2), BTN_SIZE(1,2), slider_val) + .tag(0).clock (BTN_POS(1,4), BTN_SIZE(1,2), hrs, m, s, 0) + .gauge (BTN_POS(1,6), BTN_SIZE(1,2), 5, 4, slider_val, 0xFFFFU) + .font(font_medium) + .colors(ui_slider) + .tag(4).slider (BTN_POS(2,3), BTN_SIZE(2,1), slider_val, 0xFFFFU) + .tag(5).progress (BTN_POS(2,4), BTN_SIZE(2,1), slider_val, 0xFFFFU) + .tag(6).scrollbar (BTN_POS(2,5), BTN_SIZE(2,1), slider_val, 1000, 0xFFFFU) + .font(font_small) + .colors(ui_toggle) + .tag(7).toggle (BTN_POS(3,6), BTN_SIZE(1,1), F("no\xFFyes"), show_grid) + .colors(normal_btn) + .font(font_medium) + .tag(1) + .button (BTN_POS(2, 8), BTN_SIZE(1,1), F("1")) + .button (BTN_POS(3, 8), BTN_SIZE(1,1), F("2")) + .colors(action_btn) + .button (BTN_POS(1, 8), BTN_SIZE(1,1), F("Back")); + #else + #define GRID_COLS 4 + #define GRID_ROWS 8 + + cmd.font(font_large) + .text (BTN_POS(1,1), BTN_SIZE(4,1), F("Sample Widgets")) + .tag(0).text (BTN_POS(3,6), BTN_SIZE(1,1), F("Show grid:")) + .colors(ui_toggle) + .tag(2).dial (BTN_POS(1,2), BTN_SIZE(1,3), slider_val) + .tag(3).dial (BTN_POS(1,5), BTN_SIZE(1,3), slider_val) + .tag(0).clock (BTN_POS(2,2), BTN_SIZE(1,3), hrs, m, s, 0) + .gauge (BTN_POS(2,5), BTN_SIZE(1,3), 5, 4, slider_val, 0xFFFFU) + .font(font_medium) + .colors(ui_slider) + .tag(4).slider (BTN_POS(3,3), BTN_SIZE(2,1), slider_val, 0xFFFFU) + .tag(5).progress (BTN_POS(3,4), BTN_SIZE(2,1), slider_val, 0xFFFFU) + .tag(6).scrollbar (BTN_POS(3,5), BTN_SIZE(2,1), slider_val, 1000, 0xFFFFU) + .font(font_small) + .colors(ui_toggle) + .tag(7).toggle (BTN_POS(4,6), BTN_SIZE(1,1), F("no\xFFyes"), show_grid) + .colors(normal_btn) + .font(font_medium) + .tag(1).button (BTN_POS(3, 8), BTN_SIZE(1,1), F("1")) + .button (BTN_POS(4, 8), BTN_SIZE(1,1), F("2")) + .colors(action_btn) + .button (BTN_POS(1, 8), BTN_SIZE(2,1), F("Back")); + #endif + + cmd.cmd(COLOR_RGB(bg_text_enabled)); + if (show_grid) DRAW_LAYOUT_GRID +} + +bool WidgetsScreen::onTouchStart(uint8_t tag) { + CommandProcessor cmd; + switch (tag) { + case 1: GOTO_PREVIOUS(); break; + #ifdef TOUCH_UI_PORTRAIT + case 2: cmd.track_circular (BTN_POS(1,2), BTN_SIZE(1,2), 2).execute(); break; + case 4: cmd.track_linear (BTN_POS(2,3), BTN_SIZE(2,1), 4).execute(); break; + case 5: cmd.track_linear (BTN_POS(2,4), BTN_SIZE(2,1), 5).execute(); break; + case 6: cmd.track_linear (BTN_POS(2,5), BTN_SIZE(2,1), 6).execute(); break; + #else + case 2: cmd.track_circular (BTN_POS(1,2), BTN_SIZE(1,3), 2).execute(); break; + case 3: cmd.track_circular (BTN_POS(1,5), BTN_SIZE(1,3), 3).execute(); break; + case 4: cmd.track_linear (BTN_POS(3,3), BTN_SIZE(2,1), 4).execute(); break; + case 5: cmd.track_linear (BTN_POS(3,4), BTN_SIZE(2,1), 5).execute(); break; + case 6: cmd.track_linear (BTN_POS(3,5), BTN_SIZE(2,1), 6).execute(); break; + #endif + case 7: show_grid = !show_grid; break; + default: + return false; + } + + return true; +} + +void WidgetsScreen::onIdle() { + if (refresh_timer.elapsed(TOUCH_UPDATE_INTERVAL)) { + refresh_timer.start(); + + uint16_t value; + CommandProcessor cmd; + switch (cmd.track_tag(value)) { + case 1: + case 2: + case 3: + case 4: + case 5: + case 6: + slider_val = value; break; + default: + return; + } + onRefresh(); + } + BaseScreen::onIdle(); +} + +#endif // LULZBOT_TOUCH_UI && DEVELOPER_SCREENS diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/z_offset_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/z_offset_screen.cpp new file mode 100644 index 000000000..5b26bb539 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/z_offset_screen.cpp @@ -0,0 +1,54 @@ +/*********************** + * z_offset_screen.cpp * + ***********************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../config.h" + +#if ENABLED(LULZBOT_TOUCH_UI) && HAS_BED_PROBE + +#include "screens.h" + +using namespace FTDI; +using namespace ExtUI; +using namespace Theme; + +void ZOffsetScreen::onRedraw(draw_mode_t what) { + widgets_t w(what); + w.precision(2, BaseNumericAdjustmentScreen::DEFAULT_MIDRANGE).units(PSTR("mm")); + + w.heading( PSTR("Z Offset")); + w.color(z_axis).adjuster(4, PSTR("Z Offset:"), getZOffset_mm()); + w.increments(); +} + +bool ZOffsetScreen::onTouchHeld(uint8_t tag) { + const float increment = getIncrement(); + switch (tag) { + case 4: UI_DECREMENT(ZOffset_mm); break; + case 5: UI_INCREMENT(ZOffset_mm); break; + default: + return false; + } + SaveSettingsDialogBox::settingsChanged(); + return true; +} + +#endif // LULZBOT_TOUCH_UI && HAS_BED_PROBE diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bitmaps.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bitmaps.h new file mode 100644 index 000000000..da6188ab9 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bitmaps.h @@ -0,0 +1,181 @@ +/************* + * bitmaps.h * + *************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +namespace Theme { + using namespace FTDI; + + constexpr PROGMEM bitmap_info_t Extruder_Icon_Info = { + .format = L1, + .linestride = 3, + .filter = BILINEAR, + .wrapx = BORDER, + .wrapy = BORDER, + .RAMG_offset = 8000, + .width = 24, + .height = 23, + }; + + constexpr PROGMEM unsigned char Extruder_Icon[] = { + 0x3F, 0xFF, 0xFC, + 0x7F, 0xFF, 0xFE, + 0xC0, 0x00, 0x03, + 0xC0, 0x00, 0x03, + 0xC0, 0x00, 0x03, + 0xC0, 0x00, 0x03, + 0x7F, 0xFF, 0xFE, + 0x3F, 0xFF, 0xFC, + 0x3F, 0xFF, 0xFC, + 0x7F, 0xFF, 0xFE, + 0xC0, 0x00, 0x03, + 0xC0, 0x00, 0x03, + 0xC0, 0x00, 0x03, + 0xC0, 0x00, 0x03, + 0x7F, 0xFF, 0xFE, + 0x7F, 0xFF, 0xFE, + 0x07, 0xFF, 0xE0, + 0x03, 0xFF, 0xC0, + 0x01, 0x81, 0x80, + 0x00, 0xC3, 0x00, + 0x00, 0x66, 0x00, + 0x00, 0x3C, 0x00, + 0x00, 0x3C, 0x00 + }; + + constexpr PROGMEM bitmap_info_t Bed_Heat_Icon_Info = { + .format = L1, + .linestride = 4, + .filter = BILINEAR, + .wrapx = BORDER, + .wrapy = BORDER, + .RAMG_offset = 8100, + .width = 32, + .height = 23, + }; + + constexpr PROGMEM unsigned char Bed_Heat_Icon[] = { + 0x01, 0x81, 0x81, 0x80, + 0x01, 0x81, 0x81, 0x80, + 0x00, 0xC0, 0xC0, 0xC0, + 0x00, 0xC0, 0xC0, 0xC0, + 0x00, 0x60, 0x60, 0x60, + 0x00, 0x60, 0x60, 0x60, + 0x00, 0xC0, 0xC0, 0xC0, + 0x00, 0xC0, 0xC0, 0xC0, + 0x01, 0x81, 0x81, 0x80, + 0x01, 0x81, 0x81, 0x80, + 0x03, 0x03, 0x03, 0x00, + 0x03, 0x03, 0x03, 0x00, + 0x06, 0x06, 0x06, 0x00, + 0x06, 0x06, 0x06, 0x00, + 0x03, 0x03, 0x03, 0x00, + 0x03, 0x03, 0x03, 0x00, + 0x01, 0x81, 0x81, 0x80, + 0x01, 0x81, 0x81, 0x80, + 0x00, 0x00, 0x00, 0x00, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xC0, 0x00, 0x00, 0x03, + 0xFF, 0xFF, 0xFF, 0xFF + }; + + constexpr PROGMEM bitmap_info_t Fan_Icon_Info = { + .format = L1, + .linestride = 4, + .filter = BILINEAR, + .wrapx = BORDER, + .wrapy = BORDER, + .RAMG_offset = 8300, + .width = 32, + .height = 32, + }; + + constexpr PROGMEM unsigned char Fan_Icon[] = { + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xF8, 0x00, 0x00, 0x1F, + 0xF0, 0x03, 0xF8, 0x0F, + 0xE0, 0x07, 0xF0, 0x07, + 0xC0, 0x0F, 0xE0, 0x03, + 0xC0, 0x1F, 0xE0, 0x03, + 0xC0, 0x1F, 0xE0, 0x03, + 0xC0, 0x0F, 0xE0, 0x03, + 0xC0, 0x07, 0xE0, 0x03, + 0xC0, 0x03, 0xC0, 0x03, + 0xD0, 0x00, 0x00, 0xC3, + 0xD8, 0x03, 0xC1, 0xE3, + 0xDF, 0xC7, 0xE3, 0xF3, + 0xDF, 0xEF, 0xF7, 0xFB, + 0xDF, 0xEF, 0xF7, 0xFB, + 0xDF, 0xEF, 0xF7, 0xFB, + 0xDF, 0xEF, 0xF7, 0xFB, + 0xCF, 0xC7, 0xE3, 0xFB, + 0xC7, 0x83, 0xC0, 0x1B, + 0xC3, 0x00, 0x00, 0x0B, + 0xC0, 0x03, 0xC0, 0x03, + 0xC0, 0x07, 0xE0, 0x03, + 0xC0, 0x07, 0xF0, 0x03, + 0xC0, 0x07, 0xF8, 0x03, + 0xC0, 0x07, 0xF8, 0x03, + 0xC0, 0x07, 0xF0, 0x03, + 0xE0, 0x0F, 0xE0, 0x07, + 0xF0, 0x1F, 0xC0, 0x0F, + 0xF8, 0x00, 0x00, 0x1F, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF + }; + + constexpr PROGMEM bitmap_info_t TD_Icon_Info = { + .format = L1, + .linestride = 7, + .filter = BILINEAR, + .wrapx = BORDER, + .wrapy = BORDER, + .RAMG_offset = 9000, + .width = 50, + .height = 20, + }; + + constexpr PROGMEM unsigned char TD_Icon[] = { + 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, // Thumb Drive Widget + 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x03, 0x80, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x03, 0x80, + 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, + 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xFC, 0x00 + }; +}; // namespace Theme diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_landscape.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_landscape.h new file mode 100644 index 000000000..8593c14e8 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_landscape.h @@ -0,0 +1,43 @@ + +/**************************************************************************** + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +/** + * This file was auto-generated using "svg2cpp.pl" + * + * The encoding consists of x,y pairs with the min and max scaled to + * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the + * start of a new closed path. + */ + +#pragma once + +constexpr float x_min = 0.000000; + +constexpr float x_max = 480.000000; + +constexpr float y_min = 0.000000; + +constexpr float y_max = 272.000000; + +const PROGMEM uint16_t logo_green[] = {0x7E30, 0x2358, 0x4C02, 0xBCAA, 0xB05C, 0xBCAA}; + +const PROGMEM uint16_t logo_mark[] = {0xB1F2, 0xD5EE, 0xB146, 0xD62A, 0xB0B5, 0xD6D9, 0xB052, 0xD7DC, 0xB030, 0xD90B, 0xB052, 0xDA38, 0xB0B5, 0xDB3A, 0xB146, 0xDBE9, 0xB1F2, 0xDC22, 0xB29E, 0xDBE9, 0xB330, 0xDB3A, 0xB392, 0xDA3A, 0xB3B4, 0xD90B, 0xB392, 0xD7D9, 0xB330, 0xD6D9, 0xB29E, 0xD62A, 0xFFFF, 0xB1F2, 0xD56F, 0xB2B9, 0xD5B3, 0xB362, 0xD67F, 0xB3D4, 0xD7A9, 0xB3FB, 0xD90B, 0xB3D4, 0xDA68, 0xB362, 0xDB91, 0xB2B9, 0xDC5E, 0xB1F2, 0xDCA2, 0xB12B, 0xDC5E, 0xB082, 0xDB91, 0xB00E, 0xDA68, 0xAFE9, 0xD90B, 0xB00E, 0xD7A9, 0xB082, 0xD67F, 0xB12B, 0xD5B3, 0xFFFF, 0xB1DF, 0xD770, 0xB188, 0xD770, 0xB188, 0xD8C7, 0xB1DF, 0xD8C7, 0xB24A, 0xD8A2, 0xB269, 0xD81D, 0xB24A, 0xD798, 0xFFFF, 0xB1E3, 0xD6F0, 0xB29C, 0xD73A, 0xB2D9, 0xD81A, 0xB2B4, 0xD8CD, 0xB24C, 0xD925, 0xB274, 0xD960, 0xB2AD, 0xD9EB, 0xB30D, 0xDAFE, 0xB294, 0xDAFE, 0xB23A, 0xD9FC, 0xB1F7, 0xD966, 0xB1B6, 0xD944, 0xB188, 0xD944, 0xB188, 0xDAFE, 0xB11C, 0xDAFE, 0xB11C, 0xD6F0}; + +const PROGMEM uint16_t logo_type[] = {0xB05D, 0xC9B7, 0xB042, 0xCA2D, 0xAFFF, 0xCA5F, 0xAD38, 0xCA5F, 0xACF5, 0xCA8B, 0xACD9, 0xCAFE, 0xACD9, 0xDBFC, 0xACC0, 0xDC74, 0xAC7F, 0xDCA5, 0xA9C8, 0xDCA5, 0xA984, 0xDC74, 0xA969, 0xDBFC, 0xA969, 0xCAFE, 0xA950, 0xCA8B, 0xA90F, 0xCA60, 0xA649, 0xCA60, 0xA605, 0xCA2E, 0xA5EA, 0xC9B8, 0xA5EA, 0xC52A, 0xA649, 0xC482, 0xAFFF, 0xC482, 0xB042, 0xC4B3, 0xB05D, 0xC52A, 0xFFFF, 0x99EB, 0xD6D1, 0x9E82, 0xD6D1, 0x9E82, 0xCA60, 0x99EB, 0xCA60, 0xFFFF, 0xA1D0, 0xC7F5, 0xA1EB, 0xC88B, 0xA1F8, 0xC92A, 0xA1F8, 0xD7FD, 0xA1EB, 0xD89C, 0xA1D0, 0xD933, 0xA004, 0xDC5E, 0x9FAC, 0xDC93, 0x9F50, 0xDCA5, 0x991E, 0xDCA5, 0x98C4, 0xDC93, 0x986F, 0xDC5E, 0x96A3, 0xD933, 0x9685, 0xD89C, 0x967B, 0xD7FD, 0x967B, 0xC92A, 0x9685, 0xC88B, 0x96A3, 0xC7F5, 0x986F, 0xC4C9, 0x98C4, 0xC498, 0x991E, 0xC482, 0x9F50, 0xC482, 0x9FAC, 0xC498, 0xA004, 0xC4C9, 0xFFFF, 0x8928, 0xD75F, 0x8E6A, 0xD75F, 0x8E6A, 0xD2AE, 0x8928, 0xD2AE, 0x8928, 0xD75F, 0xFFFF, 0x8928, 0xCE0F, 0x8E6A, 0xCE0F, 0x8E6A, 0xC9C0, 0x8928, 0xC9C0, 0xFFFF, 0x9162, 0xC7F5, 0x917D, 0xC88F, 0x918A, 0xC932, 0x918A, 0xCD06, 0x9178, 0xCDA1, 0x914D, 0xCE2A, 0x9077, 0xD00F, 0x9060, 0xD094, 0x907C, 0xD10F, 0x9149, 0xD2C9, 0x9176, 0xD352, 0x918A, 0xD3EC, 0x918A, 0xD7FD, 0x917D, 0xD89C, 0x9162, 0xD933, 0x8F96, 0xDC5E, 0x8F3E, 0xDC93, 0x8EE2, 0xDCA5, 0x866C, 0xDCA5, 0x860D, 0xDBFC, 0x860D, 0xC52A, 0x8628, 0xC4B3, 0x866C, 0xC482, 0x8EE2, 0xC482, 0x8F3E, 0xC498, 0x8F96, 0xC4C9, 0xFFFF, 0x80FE, 0xC983, 0x80E9, 0xCA19, 0x80BD, 0xCA9D, 0x7A63, 0xD73B, 0x809F, 0xD73B, 0x80E2, 0xD76C, 0x80FE, 0xD7E3, 0x80FE, 0xDBFC, 0x80E2, 0xDC74, 0x809F, 0xDCA5, 0x76E9, 0xDCA5, 0x768A, 0xDBFC, 0x768A, 0xD7AD, 0x769B, 0xD713, 0x76C6, 0xD68B, 0x7D42, 0xC9EC, 0x7707, 0xC9EC, 0x76C4, 0xC9BB, 0x76A8, 0xC945, 0x76A8, 0xC52A, 0x76C4, 0xC4B3, 0x7707, 0xC482, 0x809F, 0xC482, 0x80E2, 0xC4B3, 0x80FE, 0xC52A, 0xFFFF, 0x725C, 0xD6C8, 0x729D, 0xD6F9, 0x72B6, 0xD770, 0x72B6, 0xDBFC, 0x729D, 0xDC74, 0x725C, 0xDCA5, 0x69EB, 0xDCA5, 0x698C, 0xDBFC, 0x698C, 0xC52A, 0x69EB, 0xC482, 0x6C9D, 0xC482, 0x6CFD, 0xC52A, 0x6CFD, 0xD62A, 0x6D18, 0xD69C, 0x6D5B, 0xD6C8, 0xFFFF, 0x6466, 0xC4B3, 0x6482, 0xC52A, 0x6482, 0xD818, 0x647D, 0xD818, 0x6473, 0xD8AE, 0x645A, 0xD933, 0x628E, 0xDC5E, 0x6236, 0xDC93, 0x61D9, 0xDCA5, 0x5BA8, 0xDCA5, 0x5B4E, 0xDC93, 0x5AF9, 0xDC5E, 0x592D, 0xD933, 0x590F, 0xD89C, 0x5905, 0xD7FD, 0x5905, 0xC52A, 0x5921, 0xC4B3, 0x5964, 0xC482, 0x5C16, 0xC482, 0x5C5A, 0xC4B3, 0x5C76, 0xC52A, 0x5C76, 0xD62A, 0x5C91, 0xD6A0, 0x5CD4, 0xD6D1, 0x60B3, 0xD6D1, 0x60F4, 0xD6A0, 0x610D, 0xD62A, 0x610D, 0xC52A, 0x6128, 0xC4B3, 0x616C, 0xC482, 0x6423, 0xC482, 0xFFFF, 0x54D2, 0xD6C8, 0x5513, 0xD6F9, 0x552C, 0xD770, 0x552C, 0xDBFD, 0x5513, 0xDC74, 0x54D2, 0xDCA5, 0x4C62, 0xDCA5, 0x4C02, 0xDBFD, 0x4C02, 0xC52A, 0x4C62, 0xC482, 0x4F14, 0xC482, 0x4F73, 0xC52A, 0x4F73, 0xD62A, 0x4F8E, 0xD69C, 0x4FD2, 0xD6C8}; + +const PROGMEM uint16_t logo_black[] = {0x7E30, 0x37DF, 0x842F, 0x4A34, 0x7830, 0x4A34, 0xFFFF, 0x7E30, 0x336E, 0x7602, 0x4C6C, 0x865E, 0x4C6C, 0x7E30, 0x336E, 0xFFFF, 0x5C26, 0xA020, 0x6225, 0xB275, 0x5626, 0xB275, 0xFFFF, 0x5C26, 0x9BAF, 0x53F8, 0xB4AE, 0x6453, 0xB4AE, 0xFFFF, 0xA02A, 0xA020, 0xA629, 0xB275, 0x9A2A, 0xB275, 0xFFFF, 0xA02A, 0x9BAF, 0x97FC, 0xB4AE, 0xA857, 0xB4AE, 0xFFFF, 0x7E2E, 0x5CEA, 0x7DB3, 0x5D3D, 0x7D3E, 0x5EF3, 0x7C7D, 0x613A, 0x7B56, 0x6244, 0x7A14, 0x61C8, 0x7903, 0x5FEC, 0x7850, 0x5E78, 0x77CE, 0x5E60, 0x7764, 0x5EE8, 0x7734, 0x60C6, 0x76D0, 0x6353, 0x75DA, 0x64DA, 0x7490, 0x64F7, 0x733F, 0x639E, 0x7258, 0x6281, 0x71D6, 0x62A5, 0x7184, 0x6359, 0x71A0, 0x6545, 0x71A3, 0x67F2, 0x70EF, 0x69DB, 0x6FB4, 0x6A8D, 0x6E36, 0x69CC, 0x6D27, 0x6913, 0x6CAF, 0x6970, 0x6C7A, 0x6A43, 0x6CE3, 0x6C21, 0x6D50, 0x6EC4, 0x6CEB, 0x70EF, 0x6BD5, 0x722C, 0x6A51, 0x7225, 0x693A, 0x71F5, 0x68D4, 0x7286, 0x68C0, 0x736A, 0x6961, 0x7502, 0x6A24, 0x7756, 0x6A13, 0x799D, 0x6936, 0x7B4C, 0x67C3, 0x7BFC, 0x66B4, 0x7C51, 0x6667, 0x7D0B, 0x6674, 0x7DF1, 0x6747, 0x7F2D, 0x6855, 0x810F, 0x689A, 0x8349, 0x6803, 0x8550, 0x66B9, 0x86A5, 0x65C0, 0x8773, 0x6592, 0x884B, 0x65C0, 0x8922, 0x66B9, 0x89F3, 0x6803, 0x8B47, 0x689A, 0x8D4F, 0x6854, 0x8F89, 0x6745, 0x916A, 0x6673, 0x92A5, 0x6665, 0x938B, 0x66B2, 0x9446, 0x67C1, 0x949C, 0x6933, 0x954B, 0x6A11, 0x96FC, 0x6A21, 0x9943, 0x695E, 0x9B96, 0x68BC, 0x9D2E, 0x68D0, 0x9E13, 0x6936, 0x9EA3, 0x6A4E, 0x9E74, 0x6BD1, 0x9E6D, 0x6CE7, 0x9FAA, 0x6D4C, 0xA1D6, 0x6CDE, 0xA479, 0x6C75, 0xA657, 0x6CAA, 0xA72A, 0x6D21, 0xA788, 0x6E31, 0xA6CF, 0x6FAF, 0xA60E, 0x70EA, 0xA6C1, 0x719D, 0xA8AC, 0x7199, 0xAB57, 0x717D, 0xAD44, 0x71D0, 0xADF8, 0x7251, 0xAE1C, 0x7339, 0xACFF, 0x748A, 0xABA7, 0x75D4, 0xABC5, 0x76C9, 0xAD4D, 0x772D, 0xAFDA, 0x775D, 0xB1B9, 0x77C7, 0xB240, 0x7848, 0xB228, 0x78FC, 0xB0B5, 0x7A0D, 0xAED8, 0x7B50, 0xAE5F, 0x7C76, 0xAF69, 0x7D37, 0xB1B0, 0x7DAC, 0xB366, 0x7E26, 0xB3BA, 0x7EA0, 0xB367, 0x7F16, 0xB1B0, 0x7FD7, 0xAF69, 0x80FE, 0xAE60, 0x8240, 0xAEDB, 0x8351, 0xB0B8, 0x8404, 0xB22B, 0x8486, 0xB244, 0x84F0, 0xB1BD, 0x8521, 0xAFDE, 0x8584, 0xAD51, 0x867A, 0xABC9, 0x87C4, 0xABAD, 0x8915, 0xAD05, 0x89FD, 0xAE22, 0x8A7D, 0xADFF, 0x8AD0, 0xAD4C, 0x8AB5, 0xAB5E, 0x8AB1, 0xA8B2, 0x8B65, 0xA6C8, 0x8CA0, 0xA616, 0x8E1E, 0xA6D9, 0x8F2D, 0xA792, 0x8FA5, 0xA733, 0x8FDA, 0xA661, 0x8F71, 0xA481, 0x8F04, 0xA1DF, 0x8F69, 0x9FB4, 0x907F, 0x9E78, 0x9203, 0x9E7E, 0x931A, 0x9EB0, 0x9380, 0x9E1E, 0x9394, 0x9D3A, 0x92F3, 0x9BA1, 0x9230, 0x994E, 0x9241, 0x9707, 0x931F, 0x9557, 0x9491, 0x94A7, 0x95A0, 0x9452, 0x95ED, 0x9398, 0x95DF, 0x92B3, 0x950D, 0x9176, 0x93FF, 0x8F94, 0x93BA, 0x8D5A, 0x9451, 0x8B53, 0x959B, 0x89FF, 0x9693, 0x8930, 0x96C3, 0x8859, 0x9693, 0x8781, 0x959B, 0x86B2, 0x9451, 0x855C, 0x93BA, 0x8355, 0x9400, 0x811B, 0x950F, 0x7F3A, 0x95E1, 0x7DFF, 0x95EF, 0x7D19, 0x95A2, 0x7C5E, 0x9493, 0x7C09, 0x9321, 0x7B58, 0x9243, 0x79A7, 0x9233, 0x7760, 0x92F6, 0x750D, 0x9397, 0x7375, 0x9383, 0x7291, 0x931E, 0x7200, 0x9207, 0x7230, 0x9083, 0x7236, 0x8F6D, 0x70F9, 0x8F08, 0x6ECE, 0x8F76, 0x6C2C, 0x8FDF, 0x6A4D, 0x8FAA, 0x697A, 0x8F33, 0x691C, 0x8E23, 0x69D5, 0x8CA5, 0x6A96, 0x8B6A, 0x69E3, 0x8AB7, 0x67F9, 0x8ABB, 0x654C, 0x8AD6, 0x635F, 0x8A84, 0x62AB, 0x8A03, 0x6287, 0x891C, 0x63A5, 0x87CA, 0x64FC, 0x8680, 0x64DF, 0x858B, 0x6358, 0x8527, 0x60CA, 0x84F7, 0x5EEB, 0x848E, 0x5E62, 0x840B, 0x5E7B, 0x8358, 0x5FEE, 0x8247, 0x61CB, 0x8104, 0x6246, 0x7FDE, 0x613B, 0x7F1E, 0x5EF4, 0x7EA8, 0x5D3E, 0x7E2E, 0x5CEA, 0x7E2E, 0x5CEA, 0xFFFF, 0x7E2F, 0x627C, 0x7F09, 0x631B, 0x7F64, 0x649C, 0x7F09, 0x661D, 0x7E2F, 0x66BC, 0x7D55, 0x661D, 0x7CFB, 0x649C, 0x7D55, 0x631B, 0x7E2F, 0x627C, 0x7E2F, 0x627C, 0xFFFF, 0x7E2A, 0x689C, 0x81B4, 0x6938, 0x850D, 0x6B02, 0x8823, 0x6DEA, 0x8AE0, 0x71E3, 0x8D2D, 0x76DC, 0x8ED1, 0x7C60, 0x8FCE, 0x8242, 0x9022, 0x8852, 0x8FCD, 0x8E62, 0x8ED1, 0x9443, 0x8D2C, 0x99C7, 0x8ADF, 0x9EC0, 0x8822, 0xA2BA, 0x850D, 0xA5A2, 0x81B3, 0xA76C, 0x7E2A, 0xA807, 0x7AA0, 0xA76C, 0x7747, 0xA5A2, 0x7431, 0xA2BA, 0x7174, 0x9EC0, 0x6F34, 0x99EB, 0x6D8E, 0x947A, 0x6C8B, 0x8E91, 0x6C32, 0x8852, 0x6C8A, 0x8214, 0x6D8D, 0x7C2B, 0x6F33, 0x76BA, 0x7174, 0x71E4, 0x7431, 0x6DEA, 0x7747, 0x6B02, 0x7AA0, 0x6938, 0x7E2A, 0x689C, 0x7E2A, 0x689C, 0xFFFF, 0x7E2A, 0x69AA, 0x7AD3, 0x6A3B, 0x779F, 0x6BE9, 0x748F, 0x6EC1, 0x71E0, 0x72A3, 0x6FA7, 0x7771, 0x6E11, 0x7CC6, 0x6D1D, 0x8276, 0x6CCB, 0x8852, 0x6D1D, 0x8E2F, 0x6E11, 0x93DE, 0x6FA7, 0x9933, 0x71E0, 0x9E02, 0x748F, 0xA1E3, 0x779F, 0xA4BC, 0x7AD3, 0xA669, 0x7E2A, 0xA6F9, 0x7E2A, 0xA6F9, 0x8180, 0xA669, 0x84B5, 0xA4BC, 0x87C4, 0xA1E3, 0x8A73, 0x9E01, 0x8CA7, 0x9944, 0x8E44, 0x93DE, 0x8F37, 0x8E36, 0x8F89, 0x8852, 0x8F37, 0x826E, 0x8E44, 0x7CC6, 0x8CA7, 0x7760, 0x8A74, 0x72A3, 0x87C4, 0x6EC1, 0x84B5, 0x6BE9, 0x8180, 0x6A3B, 0x7E2A, 0x69AA, 0x7E2A, 0x69AA, 0xFFFF, 0x7E71, 0x6BAF, 0x7E6A, 0x6F39, 0x7DE7, 0x6F3A, 0x7DDE, 0x6BB1, 0x7E71, 0x6BAF, 0x7E71, 0x6BAF, 0xFFFF, 0x802D, 0x6BE7, 0x80C0, 0x6C0B, 0x806E, 0x6F89, 0x7FEE, 0x6F69, 0xFFFF, 0x7C22, 0x6BE9, 0x7C62, 0x6F6C, 0x7BE2, 0x6F8C, 0x7B90, 0x6C0E, 0x7C22, 0x6BE9, 0x7C22, 0x6BE9, 0xFFFF, 0x8272, 0x6CB0, 0x8300, 0x6CFA, 0x8268, 0x705B, 0x81EC, 0x701B, 0xFFFF, 0x79DD, 0x6CB4, 0x7A65, 0x701E, 0x79E8, 0x705E, 0x794F, 0x6CFE, 0x79DD, 0x6CB4, 0x79DD, 0x6CB4, 0xFFFF, 0x6FDC, 0x6CEB, 0x70B6, 0x6D8C, 0x7110, 0x6F0D, 0x70B6, 0x708E, 0x6FDC, 0x712D, 0x6F02, 0x708E, 0x6EA8, 0x6F0C, 0x6F02, 0x6D8A, 0x6FDC, 0x6CEB, 0x6FDC, 0x6CEB, 0xFFFF, 0x8C82, 0x6CEF, 0x8D5C, 0x6D8E, 0x8DB6, 0x6F0F, 0x8D5C, 0x7091, 0x8C82, 0x7131, 0x8BA8, 0x7091, 0x8B4E, 0x6F10, 0x8BA8, 0x6D90, 0x8C82, 0x6CEF, 0x8C82, 0x6CEF, 0xFFFF, 0x84A1, 0x6E0A, 0x8528, 0x6E76, 0x844B, 0x71A8, 0x83D5, 0x7149, 0x84A1, 0x6E0A, 0xFFFF, 0x77AF, 0x6E0F, 0x787A, 0x714F, 0x7804, 0x71AD, 0x7727, 0x6E7B, 0x77AF, 0x6E0F, 0x77AF, 0x6E0F, 0xFFFF, 0x86AF, 0x6FEE, 0x872B, 0x707A, 0x860F, 0x736D, 0x85A1, 0x72F1, 0x86AF, 0x6FEE, 0xFFFF, 0x75A0, 0x6FF3, 0x76AE, 0x72F6, 0x7640, 0x7372, 0x7523, 0x7081, 0x75A0, 0x6FF3, 0x75A0, 0x6FF3, 0xFFFF, 0x7E2A, 0x7132, 0x8330, 0x72F1, 0x876F, 0x77F6, 0x8A47, 0x7F75, 0x8B45, 0x8852, 0x8A47, 0x912F, 0x876F, 0x98AF, 0x8330, 0x9DB3, 0x7E2A, 0x9F72, 0x7924, 0x9DB3, 0x74E5, 0x98AF, 0x720D, 0x912F, 0x710F, 0x8852, 0x720C, 0x7F75, 0x74E5, 0x77F7, 0x7924, 0x72F1, 0x7E2A, 0x7132, 0x7E2A, 0x7132, 0xFFFF, 0x7E2A, 0x7240, 0x795F, 0x73EB, 0x7551, 0x78B5, 0x729A, 0x7FDD, 0x71A8, 0x8852, 0x729A, 0x90C8, 0x7551, 0x97EF, 0x795F, 0x9CB9, 0x7E2A, 0x9E64, 0x82F5, 0x9CBA, 0x8703, 0x97EF, 0x89BA, 0x90C8, 0x8AAC, 0x8852, 0x89BA, 0x7FDD, 0x8703, 0x78B5, 0x82F5, 0x73EB, 0x7E2A, 0x7240, 0x7E2A, 0x7240, 0xFFFF, 0x8892, 0x7253, 0x88FF, 0x72FC, 0x87A9, 0x759E, 0x874B, 0x750F, 0x87EB, 0x73AD, 0xFFFF, 0x73BF, 0x7258, 0x7509, 0x750F, 0x74A6, 0x75A5, 0x734F, 0x7305, 0x73BF, 0x7258, 0x73BF, 0x7258, 0xFFFF, 0x8A3B, 0x7525, 0x8A9C, 0x75EC, 0x8912, 0x7831, 0x88BE, 0x7784, 0xFFFF, 0x7215, 0x752F, 0x7393, 0x778C, 0x7340, 0x7836, 0x7337, 0x7847, 0x72A7, 0x775B, 0x71B4, 0x75F5, 0x71B6, 0x75F0, 0x7215, 0x752F, 0x7215, 0x752F, 0xFFFF, 0x8BA7, 0x785E, 0x8BF8, 0x793B, 0x8A43, 0x7B17, 0x89FC, 0x7A56, 0xFFFF, 0x70AA, 0x7867, 0x7254, 0x7A5F, 0x720E, 0x7B20, 0x7059, 0x7943, 0x70AA, 0x7867, 0x70AA, 0x7867, 0xFFFF, 0x8CCD, 0x7BEB, 0x8D0A, 0x7CDA, 0x8B34, 0x7E44, 0x8AFE, 0x7D72, 0x8CCD, 0x7BEB, 0xFFFF, 0x6F84, 0x7BF4, 0x7154, 0x7D7B, 0x711D, 0x7E4C, 0x6F47, 0x7CE3, 0x6F84, 0x7BF4, 0x6F84, 0x7BF4, 0xFFFF, 0x8DA6, 0x7FB9, 0x8DD0, 0x80B5, 0x8BE0, 0x81A3, 0x8BBC, 0x80C8, 0xFFFF, 0x6EAB, 0x7FC2, 0x7096, 0x80D0, 0x7071, 0x81AB, 0x6E82, 0x80BD, 0x6EAB, 0x7FC2, 0x6EAB, 0x7FC2, 0xFFFF, 0x8E2E, 0x83B2, 0x8E44, 0x84B6, 0x8C46, 0x8528, 0x8C33, 0x8445, 0xFFFF, 0x6E24, 0x83BC, 0x701F, 0x844B, 0x700D, 0x852D, 0x6E0F, 0x84BF, 0x6E24, 0x83BC, 0x6E24, 0x83BC, 0xFFFF, 0x69ED, 0x862F, 0x6AC7, 0x86CE, 0x6B22, 0x884F, 0x6AC7, 0x89D0, 0x69ED, 0x8A6F, 0x69EC, 0x8A6F, 0x6913, 0x89CF, 0x68B9, 0x884E, 0x6913, 0x86CE, 0x69ED, 0x862F, 0x69ED, 0x862F, 0xFFFF, 0x926F, 0x8634, 0x9349, 0x86D2, 0x93A3, 0x8852, 0x93A3, 0x8855, 0x9349, 0x89D5, 0x926F, 0x8A75, 0x9195, 0x89D6, 0x913A, 0x8855, 0x9194, 0x86D4, 0x926F, 0x8634, 0x926F, 0x8634, 0xFFFF, 0x8E64, 0x87C3, 0x8E64, 0x88CA, 0x8C63, 0x88BB, 0x8C63, 0x87D7, 0xFFFF, 0x6DF1, 0x87CB, 0x6FF2, 0x87DC, 0x6FF2, 0x88C2, 0x6DF1, 0x88D2, 0x6DF1, 0x87CB, 0x6DF1, 0x87CB, 0xFFFF, 0x8C48, 0x8B69, 0x8E45, 0x8BD8, 0x8E31, 0x8CD9, 0x8C36, 0x8C4D, 0x8C48, 0x8B69, 0x8C48, 0x8B69, 0xFFFF, 0x700D, 0x8B6F, 0x7020, 0x8C52, 0x6E25, 0x8CE3, 0x6E10, 0x8BDF, 0xFFFF, 0x8BE4, 0x8EEC, 0x8DD4, 0x8FDA, 0x8DAA, 0x90D4, 0x8BC1, 0x8FC9, 0x8BE4, 0x8EEC, 0x8BE4, 0x8EEC, 0xFFFF, 0x7072, 0x8EF4, 0x7096, 0x8FCF, 0x6EAC, 0x90DD, 0x6E82, 0x8FE1, 0xFFFF, 0x8B39, 0x924D, 0x8D10, 0x93B4, 0x8CD3, 0x94A3, 0x8B04, 0x931C, 0x8B39, 0x924D, 0x8B39, 0x924D, 0xFFFF, 0x711E, 0x9255, 0x7154, 0x9326, 0x6F84, 0x94AB, 0x6F47, 0x93BC, 0xFFFF, 0x8A49, 0x9578, 0x8BFE, 0x9754, 0x8BAE, 0x9830, 0x8A03, 0x9639, 0x8A49, 0x9578, 0x8A49, 0x9578, 0xFFFF, 0x720E, 0x9582, 0x7254, 0x9643, 0x70A9, 0x983A, 0x7059, 0x975C, 0x720E, 0x9582, 0xFFFF, 0x733E, 0x986A, 0x7393, 0x9916, 0x7215, 0x9B75, 0x71B4, 0x9AAF, 0xFFFF, 0x8914, 0x986E, 0x8AA6, 0x9AA3, 0x8AA2, 0x9AAB, 0x8A44, 0x9B6B, 0x88C5, 0x990F, 0x8914, 0x986E, 0x8914, 0x986E, 0xFFFF, 0x87B2, 0x9AF6, 0x890A, 0x9D97, 0x889B, 0x9E43, 0x8750, 0x9B8E, 0x87B2, 0x9AF6, 0x87B2, 0x9AF6, 0xFFFF, 0x74A6, 0x9AFD, 0x7509, 0x9B94, 0x7514, 0x9BA4, 0x73C9, 0x9E57, 0x73C2, 0x9E4F, 0x7350, 0x9D9F, 0xFFFF, 0x8619, 0x9D2B, 0x8737, 0xA01B, 0x86B9, 0xA0A9, 0x85AB, 0x9DA7, 0x8619, 0x9D2B, 0x8619, 0x9D2B, 0xFFFF, 0x764A, 0x9D3C, 0x76B8, 0x9DB7, 0x75AB, 0xA0BC, 0x752F, 0xA02F, 0xFFFF, 0x8456, 0x9EF1, 0x8533, 0xA222, 0x84AC, 0xA28F, 0x83DF, 0x9F50, 0x8456, 0x9EF1, 0x8456, 0x9EF1, 0xFFFF, 0x780E, 0x9F00, 0x7885, 0x9F5E, 0x77B9, 0xA29E, 0x7732, 0xA233, 0xFFFF, 0x6FD5, 0x9F77, 0x70AF, 0xA018, 0x70B4, 0xA021, 0x70B9, 0xA02A, 0x7114, 0xA1AA, 0x70BA, 0xA32C, 0x6FDF, 0xA3CB, 0x6F05, 0xA32D, 0x6F02, 0xA326, 0x6EFA, 0xA319, 0x6EFB, 0xA319, 0x6EA0, 0xA197, 0x6EFB, 0xA016, 0x6FD5, 0x9F77, 0x6FD5, 0x9F77, 0xFFFF, 0x8C85, 0x9F7B, 0x8D5F, 0xA01B, 0x8DBA, 0xA19C, 0x8D60, 0xA31D, 0x8C85, 0xA3BC, 0x8BAC, 0xA31D, 0x8B51, 0xA19C, 0x8BAB, 0xA01B, 0x8C85, 0x9F7B, 0x8C85, 0x9F7B, 0xFFFF, 0x8272, 0xA041, 0x830C, 0xA3A2, 0x827E, 0xA3EB, 0x81F5, 0xA082, 0x8272, 0xA041, 0x8272, 0xA041, 0xFFFF, 0x79F2, 0xA04C, 0x7A6F, 0xA08B, 0x79E9, 0xA3F6, 0x795A, 0xA3AE, 0xFFFF, 0x8079, 0xA115, 0x80CB, 0xA493, 0x8039, 0xA4B8, 0x7FF7, 0xA136, 0x8079, 0xA115, 0x8079, 0xA115, 0xFFFF, 0x7BEC, 0xA11B, 0x7C6C, 0xA13A, 0x7C2E, 0xA4BE, 0x7B9C, 0xA499, 0x7BEC, 0xA11B, 0xFFFF, 0x7E73, 0xA169, 0x7E7E, 0xA4F2, 0x7DEA, 0xA4F3, 0x7DF1, 0xA169, 0x7E73, 0xA169, 0x7E73, 0xA169, 0xFFFF, 0x7E34, 0xA9F6, 0x7F0E, 0xAA93, 0x7F69, 0xAC14, 0x7F0F, 0xAD96, 0x7E35, 0xAE37, 0x7D5A, 0xAD98, 0x7CFF, 0xAC16, 0x7D59, 0xAA95, 0x7E34, 0xA9F6, 0x7E34, 0xA9F6, 0xFFFF, 0x7E30, 0x2358, 0x4C02, 0xBCAA, 0xB05C, 0xBCAA, 0xFFFF, 0x7E30, 0x2C0E, 0x8A08, 0x503F, 0x7258, 0x503F, 0xFFFF, 0x70E4, 0x54AE, 0x8B7C, 0x54AE, 0x9EBD, 0x8F88, 0x916B, 0xB83A, 0x6ACF, 0xB83A, 0x5D90, 0x8FBE, 0x70E4, 0x54AE, 0xFFFF, 0xA02A, 0x93E3, 0xAC0F, 0xB83A, 0x9446, 0xB83A, 0xFFFF, 0x5C23, 0x941A, 0x67F5, 0xB83A, 0x5050, 0xB83A, 0x5C23, 0x941A}; + +const PROGMEM uint16_t logo_white[] = {0x7E72, 0x6BAF, 0x7E6A, 0x6F39, 0x7DE7, 0x6F3A, 0x7DDE, 0x6BB1, 0x7E72, 0x6BAF, 0xFFFF, 0x802D, 0x6BE7, 0x80C0, 0x6C0B, 0x806E, 0x6F8A, 0x7FEE, 0x6F69, 0xFFFF, 0x7C22, 0x6BE9, 0x7C62, 0x6F6C, 0x7BE2, 0x6F8C, 0x7B90, 0x6C0E, 0x7C22, 0x6BE9, 0x7C22, 0x6BE9, 0xFFFF, 0x8272, 0x6CB0, 0x8300, 0x6CFA, 0x8268, 0x705B, 0x81EC, 0x701B, 0xFFFF, 0x79DD, 0x6CB4, 0x7A65, 0x701E, 0x79E8, 0x705E, 0x794F, 0x6CFE, 0x79DD, 0x6CB4, 0x79DD, 0x6CB4, 0xFFFF, 0x84A1, 0x6E0A, 0x8528, 0x6E76, 0x844B, 0x71A8, 0x83D6, 0x7149, 0xFFFF, 0x77AF, 0x6E0F, 0x787A, 0x714F, 0x7804, 0x71AD, 0x7727, 0x6E7B, 0x77AF, 0x6E0F, 0x77AF, 0x6E0F, 0xFFFF, 0x86AF, 0x6FEE, 0x872C, 0x707A, 0x860F, 0x736D, 0x85A1, 0x72F1, 0xFFFF, 0x75A0, 0x6FF3, 0x76AE, 0x72F6, 0x7641, 0x7372, 0x7523, 0x7081, 0x75A0, 0x6FF3, 0x75A0, 0x6FF3, 0xFFFF, 0x8892, 0x7253, 0x88FF, 0x72FC, 0x87A9, 0x759E, 0x874B, 0x750F, 0xFFFF, 0x73BF, 0x7258, 0x7509, 0x750F, 0x74A6, 0x75A5, 0x734F, 0x7305, 0x73BF, 0x7258, 0x73BF, 0x7258, 0xFFFF, 0x8A3B, 0x7525, 0x8A9C, 0x75EC, 0x8912, 0x7831, 0x88BE, 0x7784, 0xFFFF, 0x7215, 0x752F, 0x7393, 0x778C, 0x7340, 0x7836, 0x71B4, 0x75F5, 0x7215, 0x752F, 0xFFFF, 0x8BA7, 0x785E, 0x8BF8, 0x793B, 0x8A43, 0x7B17, 0x89FC, 0x7A56, 0xFFFF, 0x70AA, 0x7867, 0x7254, 0x7A5F, 0x720E, 0x7B20, 0x7059, 0x7943, 0x70AA, 0x7867, 0x70AA, 0x7867, 0xFFFF, 0x8CCD, 0x7BEB, 0x8D0A, 0x7CDA, 0x8B34, 0x7E44, 0x8AFE, 0x7D72, 0xFFFF, 0x6F84, 0x7BF4, 0x7154, 0x7D7B, 0x711D, 0x7E4C, 0x6F47, 0x7CE3, 0x6F84, 0x7BF4, 0x6F84, 0x7BF4, 0xFFFF, 0x8DA6, 0x7FB9, 0x8DD0, 0x80B5, 0x8BE0, 0x81A3, 0x8BBC, 0x80C8, 0xFFFF, 0x6EAB, 0x7FC3, 0x7096, 0x80D0, 0x7071, 0x81AB, 0x6E82, 0x80BD, 0x6EAB, 0x7FC3, 0x6EAB, 0x7FC3, 0xFFFF, 0x8E2E, 0x83B2, 0x8E44, 0x84B6, 0x8C46, 0x8528, 0x8C33, 0x8445, 0xFFFF, 0x6E24, 0x83BC, 0x701F, 0x844B, 0x700D, 0x852D, 0x6E0F, 0x84BF, 0x6E24, 0x83BC, 0x6E24, 0x83BC, 0xFFFF, 0x8E64, 0x87C3, 0x8E64, 0x88CA, 0x8C63, 0x88BB, 0x8C63, 0x87D7, 0xFFFF, 0x6DF1, 0x87CB, 0x6FF2, 0x87DC, 0x6FF2, 0x88C2, 0x6DF1, 0x88D3, 0x6DF1, 0x87CB, 0xFFFF, 0x8C48, 0x8B69, 0x8E45, 0x8BD8, 0x8E31, 0x8CD9, 0x8C36, 0x8C4D, 0x8C48, 0x8B69, 0x8C48, 0x8B69, 0xFFFF, 0x700D, 0x8B70, 0x7020, 0x8C52, 0x6E25, 0x8CE3, 0x6E10, 0x8BE0, 0xFFFF, 0x8BE4, 0x8EEC, 0x8DD4, 0x8FDA, 0x8DAA, 0x90D4, 0x8BC0, 0x8FC9, 0x8BE4, 0x8EEC, 0xFFFF, 0x7072, 0x8EF4, 0x7096, 0x8FD0, 0x6EAC, 0x90DD, 0x6E82, 0x8FE1, 0xFFFF, 0x8B39, 0x924D, 0x8D10, 0x93B4, 0x8CD3, 0x94A3, 0x8B04, 0x931D, 0x8B39, 0x924D, 0x8B39, 0x924D, 0xFFFF, 0x711E, 0x9255, 0x7154, 0x9326, 0x6F84, 0x94AB, 0x6F47, 0x93BC, 0xFFFF, 0x8A49, 0x9579, 0x8BFE, 0x9754, 0x8BAE, 0x9830, 0x8A03, 0x9639, 0x8A49, 0x9579, 0x8A49, 0x9579, 0xFFFF, 0x720E, 0x9582, 0x7254, 0x9644, 0x70A9, 0x983A, 0x7059, 0x975C, 0xFFFF, 0x733D, 0x986A, 0x7393, 0x9916, 0x7215, 0x9B75, 0x71B4, 0x9AAF, 0xFFFF, 0x8914, 0x986E, 0x8AA6, 0x9AA3, 0x8A44, 0x9B6B, 0x88C5, 0x990F, 0x8914, 0x986E, 0xFFFF, 0x87B2, 0x9AF6, 0x890A, 0x9D97, 0x889B, 0x9E43, 0x8750, 0x9B8E, 0x87B2, 0x9AF6, 0x87B2, 0x9AF6, 0xFFFF, 0x74A6, 0x9AFD, 0x7509, 0x9B94, 0x73C9, 0x9E57, 0x7350, 0x9DA0, 0xFFFF, 0x8619, 0x9D2B, 0x8737, 0xA01B, 0x86B9, 0xA0A9, 0x85AB, 0x9DA7, 0x8619, 0x9D2B, 0x8619, 0x9D2B, 0xFFFF, 0x764A, 0x9D3C, 0x76B8, 0x9DB7, 0x75AB, 0xA0BC, 0x752E, 0xA02F, 0xFFFF, 0x8455, 0x9EF1, 0x8533, 0xA222, 0x84AC, 0xA28F, 0x83DF, 0x9F50, 0x8455, 0x9EF1, 0x8455, 0x9EF1, 0xFFFF, 0x780E, 0x9F00, 0x7885, 0x9F5E, 0x77B9, 0xA29E, 0x7732, 0xA233, 0xFFFF, 0x8272, 0xA041, 0x830C, 0xA3A2, 0x827D, 0xA3EC, 0x81F5, 0xA082, 0x8272, 0xA041, 0x8272, 0xA041, 0xFFFF, 0x79F2, 0xA04D, 0x7A6E, 0xA08C, 0x79E9, 0xA3F6, 0x795A, 0xA3AE, 0xFFFF, 0x8079, 0xA115, 0x80CB, 0xA493, 0x8039, 0xA4B9, 0x7FF7, 0xA136, 0x8079, 0xA115, 0x8079, 0xA115, 0xFFFF, 0x7BEC, 0xA11B, 0x7C6C, 0xA13A, 0x7C2E, 0xA4BE, 0x7B9C, 0xA499, 0xFFFF, 0x7E73, 0xA169, 0x7E7E, 0xA4F2, 0x7DE9, 0xA4F3, 0x7DF1, 0xA169, 0x7E73, 0xA169, 0xFFFF, 0x7F6C, 0x7644, 0x801D, 0x768B, 0x8069, 0x76D5, 0x80AE, 0x7739, 0x8102, 0x785D, 0x80E7, 0x799A, 0x807D, 0x7A8F, 0x7FD8, 0x7B0A, 0x7FC8, 0x7AFB, 0x7FA3, 0x7ABE, 0x7FCB, 0x7A6B, 0x7FE9, 0x7A54, 0x803C, 0x7A0A, 0x8084, 0x7950, 0x8090, 0x787F, 0x8057, 0x77D1, 0x8021, 0x778E, 0x7FE8, 0x775E, 0x7F71, 0x773A, 0x7F02, 0x777C, 0x7ECF, 0x77C4, 0x7EAC, 0x780F, 0x7E89, 0x7880, 0x7E77, 0x78DA, 0x7E6F, 0x79A6, 0x7E7D, 0x79F6, 0x7E9C, 0x7A3A, 0x7F0C, 0x7AD3, 0x8002, 0x7C03, 0x8084, 0x7CC0, 0x80B8, 0x7D14, 0x80F6, 0x7D99, 0x8135, 0x7EE9, 0x812D, 0x8036, 0x8103, 0x8165, 0x80C6, 0x8280, 0x8087, 0x8371, 0x806C, 0x8452, 0x810C, 0x8410, 0x8154, 0x839E, 0x8206, 0x823F, 0x827D, 0x80B4, 0x8297, 0x8003, 0x82CD, 0x7E19, 0x82F5, 0x7CEB, 0x8303, 0x7CA0, 0x8342, 0x7BB3, 0x8375, 0x7B3F, 0x83B2, 0x7ADA, 0x843E, 0x7A4C, 0x84A1, 0x7A11, 0x84DA, 0x79F7, 0x8528, 0x7A0D, 0x8575, 0x7A3B, 0x8597, 0x7A59, 0x861A, 0x7B08, 0x8672, 0x7C1B, 0x8684, 0x7CB2, 0x8686, 0x7D50, 0x8636, 0x7E77, 0x8597, 0x7F10, 0x84E7, 0x7F24, 0x8442, 0x7EA8, 0x843C, 0x7E82, 0x8439, 0x7E27, 0x847D, 0x7E2E, 0x8498, 0x7E44, 0x84F4, 0x7E8C, 0x8582, 0x7E7E, 0x85FA, 0x7E0C, 0x8630, 0x7D40, 0x862E, 0x7CC4, 0x861C, 0x7C48, 0x85D5, 0x7B74, 0x8562, 0x7AE7, 0x851B, 0x7ABD, 0x84E1, 0x7AAF, 0x848E, 0x7AE2, 0x8456, 0x7B13, 0x83F8, 0x7B7B, 0x83CC, 0x7BCD, 0x83A8, 0x7C2E, 0x837D, 0x7CFD, 0x8365, 0x7EF1, 0x8367, 0x8074, 0x8361, 0x810D, 0x8303, 0x8341, 0x8266, 0x8533, 0x81A6, 0x8702, 0x81A4, 0x8710, 0x824F, 0x8671, 0x82F2, 0x8603, 0x83B0, 0x85C4, 0x8493, 0x860B, 0x84F8, 0x8689, 0x853B, 0x8727, 0x8575, 0x87EB, 0x85F2, 0x8982, 0x8655, 0x8ABA, 0x86A4, 0x8B6E, 0x86D5, 0x8BAE, 0x8702, 0x8BCD, 0x8779, 0x8BD7, 0x87BB, 0x8BBA, 0x8806, 0x8B7C, 0x8834, 0x8B3C, 0x8853, 0x8B04, 0x8887, 0x8A44, 0x8881, 0x8962, 0x8869, 0x88EC, 0x884A, 0x888D, 0x87EB, 0x8810, 0x876F, 0x880F, 0x86FC, 0x887C, 0x86BC, 0x892D, 0x86AF, 0x8955, 0x866E, 0x8955, 0x8665, 0x88F9, 0x86C0, 0x8806, 0x8756, 0x8771, 0x8806, 0x876F, 0x8899, 0x8824, 0x88C9, 0x88AB, 0x88E7, 0x8932, 0x88F5, 0x8A64, 0x88B1, 0x8B88, 0x8873, 0x8C00, 0x882B, 0x8C5B, 0x87DD, 0x8C9D, 0x8790, 0x8CC5, 0x86E1, 0x8CCB, 0x86A0, 0x8CA8, 0x8679, 0x8C86, 0x863A, 0x8C3E, 0x85C5, 0x8B6D, 0x853C, 0x8A3D, 0x847D, 0x8882, 0x8456, 0x8835, 0x8420, 0x8808, 0x83DF, 0x8820, 0x831F, 0x88EC, 0x825B, 0x8A2B, 0x8258, 0x8A47, 0x8323, 0x8BA0, 0x8399, 0x8CA6, 0x83F8, 0x8DF6, 0x8405, 0x8F9A, 0x83DE, 0x905F, 0x83A4, 0x9120, 0x833B, 0x929B, 0x82F3, 0x945E, 0x82FC, 0x9529, 0x8319, 0x9587, 0x8336, 0x95C0, 0x841E, 0x968C, 0x844B, 0x9688, 0x8482, 0x966F, 0x84E3, 0x9607, 0x852B, 0x955E, 0x8543, 0x94FA, 0x854B, 0x9497, 0x852F, 0x93EA, 0x84D7, 0x9378, 0x8463, 0x9357, 0x83F5, 0x9378, 0x83AE, 0x9352, 0x83BB, 0x92D5, 0x83EB, 0x92BA, 0x8461, 0x928C, 0x8501, 0x92C4, 0x8587, 0x937A, 0x85B9, 0x949F, 0x85AC, 0x9536, 0x8586, 0x95D3, 0x8538, 0x96A1, 0x84B0, 0x9749, 0x845E, 0x9778, 0x8401, 0x9786, 0x83A7, 0x975E, 0x835F, 0x9730, 0x82CB, 0x96A2, 0x8285, 0x962B, 0x825B, 0x95B6, 0x824F, 0x9579, 0x822A, 0x945A, 0x8233, 0x932B, 0x828E, 0x8FF7, 0x8201, 0x8E1D, 0x81D6, 0x8E1B, 0x80A8, 0x8E1A, 0x7D88, 0x9136, 0x7D81, 0x9352, 0x7E13, 0x9482, 0x7EE8, 0x960C, 0x7F4A, 0x970B, 0x7F69, 0x97B4, 0x7F6C, 0x983B, 0x7F63, 0x9881, 0x7F26, 0x9992, 0x7EEE, 0x9A13, 0x7EA6, 0x9A86, 0x7E66, 0x9ACC, 0x7E14, 0x9B05, 0x7D61, 0x9B0D, 0x7CC3, 0x9A88, 0x7C84, 0x9A22, 0x7C50, 0x99AA, 0x7C25, 0x987B, 0x7C63, 0x9759, 0x7CE5, 0x9694, 0x7D8C, 0x9653, 0x7DB0, 0x966C, 0x7DB1, 0x96DF, 0x7D0E, 0x971E, 0x7CAB, 0x97B5, 0x7C81, 0x9884, 0x7CA2, 0x9950, 0x7CCE, 0x99AC, 0x7D03, 0x99F6, 0x7D77, 0x9A4B, 0x7DF2, 0x9A35, 0x7E2F, 0x9A00, 0x7E59, 0x99C6, 0x7E64, 0x99B4, 0x7E97, 0x9944, 0x7EAE, 0x98F9, 0x7ECA, 0x9840, 0x7EC4, 0x97E8, 0x7EAF, 0x9796, 0x7E5B, 0x96EA, 0x7D73, 0x9597, 0x7C95, 0x9462, 0x7C76, 0x9426, 0x7C3D, 0x9397, 0x7C18, 0x92D4, 0x7C1D, 0x9165, 0x7C9A, 0x8F14, 0x7CE9, 0x8E19, 0x7CDA, 0x8E1F, 0x7A83, 0x8FB1, 0x7A47, 0x8FC2, 0x7960, 0x8FD1, 0x78E6, 0x8FA5, 0x787F, 0x8F77, 0x77CC, 0x8F40, 0x7777, 0x8F3D, 0x772A, 0x8F54, 0x768D, 0x8FBB, 0x7670, 0x8FDD, 0x7609, 0x9086, 0x75EE, 0x90E1, 0x75DF, 0x916F, 0x75DF, 0x91A2, 0x75FF, 0x9292, 0x767C, 0x933F, 0x7721, 0x9375, 0x77A0, 0x92F1, 0x779C, 0x90BF, 0x779F, 0x907F, 0x77A1, 0x9055, 0x77DC, 0x904C, 0x77ED, 0x9087, 0x783B, 0x91C9, 0x7809, 0x9369, 0x77B0, 0x9410, 0x7737, 0x9468, 0x7645, 0x9438, 0x7579, 0x933A, 0x753D, 0x9268, 0x752C, 0x9188, 0x7538, 0x90AB, 0x7557, 0x9012, 0x756A, 0x8FD4, 0x7617, 0x8E93, 0x7664, 0x8E4F, 0x76E5, 0x8DE6, 0x7760, 0x8DAC, 0x77DC, 0x8D9E, 0x78BE, 0x8DC4, 0x795C, 0x8DF1, 0x7988, 0x8DF0, 0x7A69, 0x8DA0, 0x7AB9, 0x8D58, 0x7B46, 0x8C9F, 0x7BB3, 0x8BD0, 0x7BB7, 0x8B31, 0x7AD6, 0x8B59, 0x7983, 0x8B9A, 0x791B, 0x8BAC, 0x7895, 0x8B9D, 0x780B, 0x8B35, 0x77A4, 0x8A6A, 0x7784, 0x89EC, 0x773F, 0x8886, 0x7724, 0x880F, 0x76DB, 0x86FD, 0x7673, 0x8607, 0x75E1, 0x859E, 0x7538, 0x85D5, 0x7502, 0x8614, 0x74DB, 0x8661, 0x74C1, 0x869C, 0x74A2, 0x87BB, 0x74B8, 0x885D, 0x74C3, 0x888C, 0x74DF, 0x88D2, 0x7574, 0x8936, 0x761A, 0x88D3, 0x7672, 0x87D7, 0x767D, 0x87BC, 0x76AE, 0x8795, 0x76CA, 0x87F9, 0x76A5, 0x88B8, 0x7656, 0x895A, 0x7578, 0x89EF, 0x74FD, 0x89D4, 0x748E, 0x895C, 0x7462, 0x88FE, 0x7441, 0x8876, 0x7427, 0x87D9, 0x744C, 0x862A, 0x7494, 0x8576, 0x74D8, 0x8513, 0x74FC, 0x84EE, 0x75E8, 0x848A, 0x76DA, 0x851A, 0x777B, 0x865A, 0x77EA, 0x87BE, 0x7847, 0x8903, 0x7873, 0x8975, 0x78A2, 0x89B1, 0x78D7, 0x89D9, 0x791D, 0x89F0, 0x79C7, 0x89AB, 0x7A2B, 0x8938, 0x7AA0, 0x8868, 0x7A67, 0x83FA, 0x79D6, 0x82A1, 0x795A, 0x80F5, 0x7937, 0x7FF7, 0x793A, 0x7EE4, 0x7950, 0x7E54, 0x7970, 0x7DD1, 0x798F, 0x7D44, 0x79B3, 0x7BEA, 0x79AD, 0x7B69, 0x7992, 0x7B0C, 0x7983, 0x7AE4, 0x7886, 0x79EC, 0x77A1, 0x7ACF, 0x7787, 0x7B52, 0x777B, 0x7BDB, 0x77B1, 0x7C9E, 0x7846, 0x7CE9, 0x78E3, 0x7CA0, 0x7917, 0x7CB1, 0x791B, 0x7D17, 0x78B7, 0x7D82, 0x784C, 0x7DB0, 0x776A, 0x7D66, 0x770C, 0x7CC6, 0x76E4, 0x7BEA, 0x76EB, 0x7B15, 0x7702, 0x7A7F, 0x7710, 0x7A4B, 0x77A2, 0x790A, 0x7891, 0x789F, 0x7973, 0x790B, 0x7A2C, 0x7A0F, 0x7A54, 0x7A76, 0x7A78, 0x7AEE, 0x7A8E, 0x7BF9, 0x7A65, 0x7DC1, 0x7A4A, 0x7EDC, 0x7A4B, 0x7F1B, 0x7A7F, 0x800B, 0x7AFA, 0x80FD, 0x7B72, 0x81A2, 0x7D4E, 0x80DA, 0x7F2C, 0x824D, 0x7FB6, 0x8175, 0x800C, 0x809F, 0x8045, 0x7FD2, 0x8056, 0x7F0C, 0x8037, 0x7E65, 0x8008, 0x7E02, 0x7F7E, 0x7D1D, 0x7E90, 0x7BCF, 0x7E13, 0x7B0A, 0x7DDC, 0x7A70, 0x7DC6, 0x79DB, 0x7DC9, 0x797D, 0x7DDB, 0x787C, 0x7E01, 0x77E5, 0x7E25, 0x7782, 0x7E5D, 0x7711, 0x7E85, 0x76D8, 0x7EBA, 0x7698, 0x7F6C, 0x7643}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_portrait.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_portrait.h new file mode 100644 index 000000000..ef8608207 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_portrait.h @@ -0,0 +1,43 @@ + +/**************************************************************************** + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +/** + * This file was auto-generated using "svg2cpp.pl" + * + * The encoding consists of x,y pairs with the min and max scaled to + * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the + * start of a new closed path. + */ + +#pragma once + +constexpr float x_min = 0.000000; + +constexpr float x_max = 272.000000; + +constexpr float y_min = 0.000000; + +constexpr float y_max = 480.000000; + +const PROGMEM uint16_t logo_green[] = {0x8048, 0x46D9, 0x27BC, 0x9DBA, 0xD8D3, 0x9DBA}; + +const PROGMEM uint16_t logo_mark[] = {0xDB9F, 0xAC0C, 0xDA6F, 0xAC2D, 0xD970, 0xAC91, 0xD8C0, 0xAD23, 0xD885, 0xADCF, 0xD8C0, 0xAE7A, 0xD970, 0xAF0C, 0xDA6F, 0xAF6F, 0xDB9F, 0xAF8F, 0xDCCE, 0xAF6F, 0xDDD0, 0xAF0C, 0xDE7D, 0xAE7B, 0xDEB9, 0xADCF, 0xDE7D, 0xAD22, 0xDDD0, 0xAC91, 0xDCCE, 0xAC2D, 0xFFFF, 0xDB9F, 0xABC3, 0xDCFE, 0xABEA, 0xDE28, 0xAC5E, 0xDEF1, 0xAD06, 0xDF36, 0xADCF, 0xDEF1, 0xAE95, 0xDE28, 0xAF3E, 0xDCFE, 0xAFB1, 0xDB9F, 0xAFD8, 0xDA3F, 0xAFB1, 0xD916, 0xAF3E, 0xD849, 0xAE95, 0xD808, 0xADCF, 0xD849, 0xAD06, 0xD916, 0xAC5E, 0xDA3F, 0xABEA, 0xFFFF, 0xDB7D, 0xACE6, 0xDAE4, 0xACE6, 0xDAE4, 0xADA9, 0xDB7D, 0xADA9, 0xDC3B, 0xAD94, 0xDC71, 0xAD48, 0xDC3B, 0xACFD, 0xFFFF, 0xDB85, 0xAC9E, 0xDCCB, 0xACC8, 0xDD37, 0xAD47, 0xDCF6, 0xADAC, 0xDC3E, 0xADDE, 0xDC85, 0xADFF, 0xDCE8, 0xAE4E, 0xDD92, 0xAEEA, 0xDCBD, 0xAEEA, 0xDC1E, 0xAE58, 0xDBA7, 0xAE03, 0xDB36, 0xADEF, 0xDAE4, 0xADEF, 0xDAE4, 0xAEEA, 0xDA26, 0xAEEA, 0xDA26, 0xAC9E}; + +const PROGMEM uint16_t logo_type[] = {0xD8D5, 0xA520, 0xD8A5, 0xA563, 0xD82E, 0xA57F, 0xD348, 0xA57F, 0xD2D1, 0xA598, 0xD2A0, 0xA5D9, 0xD2A0, 0xAF7A, 0xD274, 0xAFBE, 0xD202, 0xAFDA, 0xCD37, 0xAFDA, 0xCCBF, 0xAFBE, 0xCC8F, 0xAF7A, 0xCC8F, 0xA5D9, 0xCC63, 0xA598, 0xCBF1, 0xA57F, 0xC70B, 0xA57F, 0xC694, 0xA563, 0xC664, 0xA520, 0xC664, 0xA28C, 0xC70B, 0xA22C, 0xD82E, 0xA22C, 0xD8A5, 0xA248, 0xD8D5, 0xA28C, 0xFFFF, 0xB138, 0xAC8C, 0xB952, 0xAC8C, 0xB952, 0xA57F, 0xB138, 0xA57F, 0xFFFF, 0xBF27, 0xA421, 0xBF57, 0xA476, 0xBF6D, 0xA4D0, 0xBF6D, 0xAD36, 0xBF57, 0xAD90, 0xBF27, 0xADE6, 0xBBFA, 0xAFB2, 0xBB60, 0xAFCF, 0xBABD, 0xAFDA, 0xAFCE, 0xAFDA, 0xAF30, 0xAFCF, 0xAE9A, 0xAFB2, 0xAB6E, 0xADE6, 0xAB39, 0xAD90, 0xAB28, 0xAD36, 0xAB28, 0xA4D0, 0xAB39, 0xA476, 0xAB6E, 0xA421, 0xAE9A, 0xA255, 0xAF30, 0xA239, 0xAFCE, 0xA22C, 0xBABD, 0xA22C, 0xBB60, 0xA239, 0xBBFA, 0xA255, 0xFFFF, 0x93A4, 0xACDC, 0x9CEA, 0xACDC, 0x9CEA, 0xAA34, 0x93A4, 0xAA34, 0x93A4, 0xACDC, 0xFFFF, 0x93A4, 0xA796, 0x9CEA, 0xA796, 0x9CEA, 0xA525, 0x93A4, 0xA525, 0xFFFF, 0xA227, 0xA421, 0xA258, 0xA478, 0xA26E, 0xA4D5, 0xA26E, 0xA700, 0xA24F, 0xA757, 0xA204, 0xA7A5, 0xA089, 0xA8B8, 0xA061, 0xA903, 0xA092, 0xA949, 0xA1FC, 0xAA43, 0xA24B, 0xAA91, 0xA26E, 0xAAE8, 0xA26E, 0xAD36, 0xA258, 0xAD90, 0xA227, 0xADE6, 0x9EFC, 0xAFB2, 0x9E61, 0xAFCF, 0x9DBE, 0xAFDA, 0x8ED0, 0xAFDA, 0x8E28, 0xAF7A, 0x8E28, 0xA28C, 0x8E59, 0xA248, 0x8ED0, 0xA22C, 0x9DBE, 0xA22C, 0x9E61, 0xA239, 0x9EFC, 0xA255, 0xFFFF, 0x853C, 0xA502, 0x8517, 0xA557, 0x84C9, 0xA5A2, 0x7994, 0xACC8, 0x8494, 0xACC8, 0x850A, 0xACE4, 0x853C, 0xAD27, 0x853C, 0xAF7A, 0x850A, 0xAFBE, 0x8494, 0xAFDA, 0x7371, 0xAFDA, 0x72C9, 0xAF7A, 0x72C9, 0xAD09, 0x72E8, 0xACB2, 0x7333, 0xAC64, 0x7EA5, 0xA53E, 0x73A6, 0xA53E, 0x732F, 0xA522, 0x72FE, 0xA4DF, 0x72FE, 0xA28C, 0x732F, 0xA248, 0x73A6, 0xA22C, 0x8494, 0xA22C, 0x850A, 0xA248, 0x853C, 0xA28C, 0xFFFF, 0x6B68, 0xAC87, 0x6BDB, 0xACA3, 0x6C07, 0xACE6, 0x6C07, 0xAF7A, 0x6BDB, 0xAFBE, 0x6B68, 0xAFDA, 0x5C84, 0xAFDA, 0x5BDC, 0xAF7A, 0x5BDC, 0xA28C, 0x5C84, 0xA22C, 0x6146, 0xA22C, 0x61EE, 0xA28C, 0x61EE, 0xAC2D, 0x621E, 0xAC6E, 0x6295, 0xAC87, 0xFFFF, 0x52C6, 0xA248, 0x52F7, 0xA28C, 0x52F7, 0xAD45, 0x52EE, 0xAD45, 0x52DC, 0xAD9B, 0x52B1, 0xADE6, 0x4F85, 0xAFB2, 0x4EEA, 0xAFCF, 0x4E47, 0xAFDA, 0x4359, 0xAFDA, 0x42BA, 0xAFCF, 0x4224, 0xAFB2, 0x3EF8, 0xADE6, 0x3EC3, 0xAD90, 0x3EB2, 0xAD36, 0x3EB2, 0xA28C, 0x3EE2, 0xA248, 0x3F5A, 0xA22C, 0x441B, 0xA22C, 0x4493, 0xA248, 0x44C3, 0xA28C, 0x44C3, 0xAC2D, 0x44F4, 0xAC71, 0x456B, 0xAC8C, 0x4C3E, 0xAC8C, 0x4CB1, 0xAC71, 0x4CDD, 0xAC2D, 0x4CDD, 0xA28C, 0x4D0D, 0xA248, 0x4D85, 0xA22C, 0x524F, 0xA22C, 0xFFFF, 0x3748, 0xAC87, 0x37BB, 0xACA3, 0x37E7, 0xACE6, 0x37E7, 0xAF7A, 0x37BB, 0xAFBE, 0x3748, 0xAFDA, 0x2864, 0xAFDA, 0x27BC, 0xAF7A, 0x27BC, 0xA28C, 0x2864, 0xA22C, 0x2D26, 0xA22C, 0x2DCD, 0xA28C, 0x2DCD, 0xAC2D, 0x2DFE, 0xAC6E, 0x2E75, 0xAC87}; + +const PROGMEM uint16_t logo_black[] = {0x8048, 0x527A, 0x8ADE, 0x5CDE, 0x75B2, 0x5CDE, 0xFFFF, 0x8048, 0x4FF6, 0x71D9, 0x5E20, 0x8EB8, 0x5E20, 0x8048, 0x4FF6, 0xFFFF, 0x4436, 0x8D8E, 0x4ECC, 0x97F2, 0x39A0, 0x97F2, 0xFFFF, 0x4436, 0x8B0A, 0x35C8, 0x9934, 0x52A5, 0x9934, 0xFFFF, 0xBC3D, 0x8D8E, 0xC6D4, 0x97F2, 0xB1A7, 0x97F2, 0xFFFF, 0xBC3D, 0x8B0A, 0xADCE, 0x9934, 0xCAAC, 0x9934, 0xFFFF, 0x8045, 0x6778, 0x7F6D, 0x67A7, 0x7E9D, 0x689F, 0x7D49, 0x69EA, 0x7B41, 0x6A81, 0x7908, 0x6A3A, 0x7726, 0x692C, 0x75EA, 0x685A, 0x7505, 0x684C, 0x744A, 0x6899, 0x73F5, 0x69A8, 0x7345, 0x6B1A, 0x7193, 0x6BF8, 0x6F4D, 0x6C08, 0x6CFA, 0x6B45, 0x6B61, 0x6AA3, 0x6A7D, 0x6AB7, 0x69EB, 0x6B1D, 0x6A1D, 0x6C34, 0x6A22, 0x6DB8, 0x68E5, 0x6ECD, 0x66B9, 0x6F33, 0x6417, 0x6EC5, 0x6239, 0x6E5C, 0x6165, 0x6E91, 0x6108, 0x6F09, 0x61C1, 0x7018, 0x6282, 0x7196, 0x61CF, 0x72D1, 0x5FE5, 0x7384, 0x5D38, 0x7380, 0x5B4B, 0x7365, 0x5A97, 0x73B7, 0x5A74, 0x7438, 0x5B90, 0x7520, 0x5CE8, 0x7671, 0x5CCB, 0x77BB, 0x5B43, 0x78B0, 0x58B6, 0x7914, 0x56D7, 0x7944, 0x564F, 0x79AD, 0x5667, 0x7A2F, 0x57DA, 0x7AE3, 0x59B7, 0x7BF3, 0x5A31, 0x7D37, 0x5927, 0x7E5D, 0x56E0, 0x7F1E, 0x5529, 0x7F93, 0x54D7, 0x800D, 0x5529, 0x8087, 0x56E0, 0x80FD, 0x5926, 0x81BE, 0x5A30, 0x82E5, 0x59B5, 0x8428, 0x57D8, 0x8538, 0x5664, 0x85EB, 0x564C, 0x866D, 0x56D4, 0x86D7, 0x58B2, 0x8708, 0x5B3F, 0x876B, 0x5CC6, 0x8860, 0x5CE3, 0x89AA, 0x5B8B, 0x8AFC, 0x5A6D, 0x8BE3, 0x5A91, 0x8C65, 0x5B44, 0x8CB7, 0x5D32, 0x8C9C, 0x5FDE, 0x8C98, 0x61C7, 0x8D4B, 0x627A, 0x8E87, 0x61B9, 0x9005, 0x60FF, 0x9114, 0x615C, 0x918B, 0x622F, 0x91C0, 0x640E, 0x9158, 0x66B0, 0x90EA, 0x68DC, 0x9150, 0x6A18, 0x9266, 0x6A12, 0x93E9, 0x69E0, 0x9501, 0x6A72, 0x9567, 0x6B56, 0x957B, 0x6CEE, 0x94D9, 0x6F43, 0x9417, 0x7188, 0x9428, 0x7339, 0x9506, 0x73E9, 0x9678, 0x743E, 0x9787, 0x74F8, 0x97D4, 0x75DD, 0x97C6, 0x771A, 0x96F4, 0x78FB, 0x95E6, 0x7B35, 0x95A1, 0x7D3D, 0x9637, 0x7E91, 0x9782, 0x7F60, 0x987A, 0x8038, 0x98AA, 0x810F, 0x987B, 0x81DF, 0x9782, 0x8333, 0x9638, 0x853B, 0x95A1, 0x8775, 0x95E7, 0x8956, 0x96F5, 0x8A92, 0x97C8, 0x8B78, 0x97D6, 0x8C32, 0x9789, 0x8C88, 0x967A, 0x8D37, 0x9508, 0x8EE9, 0x942A, 0x912F, 0x941A, 0x9383, 0x94DD, 0x951B, 0x957F, 0x95FF, 0x956B, 0x9690, 0x9505, 0x9660, 0x93ED, 0x9659, 0x926A, 0x9797, 0x9154, 0x99C3, 0x90EF, 0x9C65, 0x915D, 0x9E43, 0x91C6, 0x9F17, 0x9191, 0x9F74, 0x9119, 0x9EBB, 0x900A, 0x9DFA, 0x8E8C, 0x9EAE, 0x8D51, 0xA098, 0x8C9E, 0xA345, 0x8CA2, 0xA531, 0x8CBE, 0xA5E5, 0x8C6B, 0xA609, 0x8BEA, 0xA4EC, 0x8B02, 0xA394, 0x89B1, 0xA3B2, 0x8867, 0xA53A, 0x8772, 0xA7C6, 0x870E, 0xA9A5, 0x86DE, 0xAA2D, 0x8675, 0xAA14, 0x85F2, 0xA8A2, 0x853F, 0xA6C5, 0x842E, 0xA64B, 0x82EB, 0xA755, 0x81C5, 0xA99C, 0x8104, 0xAB52, 0x808F, 0xABA6, 0x8015, 0xAB52, 0x7F9B, 0xA99C, 0x7F25, 0xA755, 0x7E64, 0xA64C, 0x7D3E, 0xA6C7, 0x7BFA, 0xA8A5, 0x7AEA, 0xAA18, 0x7A37, 0xAA31, 0x79B5, 0xA9A9, 0x794B, 0xA7CA, 0x791B, 0xA53C, 0x78B7, 0xA3B6, 0x77C1, 0xA39A, 0x7677, 0xA4F1, 0x7526, 0xA60E, 0x743F, 0xA5EB, 0x73BD, 0xA538, 0x736B, 0xA34B, 0x7387, 0xA09E, 0x738A, 0x9EB4, 0x72D6, 0x9E02, 0x719B, 0x9EC4, 0x701D, 0x9F7E, 0x6F0E, 0x9F20, 0x6E96, 0x9E4E, 0x6E61, 0x9C6E, 0x6ECA, 0x99CB, 0x6F37, 0x97A0, 0x6ED2, 0x9664, 0x6DBC, 0x966B, 0x6C38, 0x969B, 0x6B21, 0x960B, 0x6ABB, 0x9526, 0x6AA6, 0x938E, 0x6B48, 0x913B, 0x6C0B, 0x8EF4, 0x6BFA, 0x8D43, 0x6B1D, 0x8C94, 0x69AA, 0x8C3F, 0x689B, 0x8B85, 0x684D, 0x8A9E, 0x685C, 0x8962, 0x692E, 0x8781, 0x6A3C, 0x8546, 0x6A82, 0x833F, 0x69EA, 0x81EC, 0x68A0, 0x811C, 0x67A8, 0x8045, 0x6778, 0x8045, 0x6778, 0xFFFF, 0x8047, 0x6AA0, 0x81C8, 0x6AFA, 0x8268, 0x6BD5, 0x81C8, 0x6CAF, 0x8047, 0x6D09, 0x7EC6, 0x6CAF, 0x7E27, 0x6BD5, 0x7EC6, 0x6AFA, 0x8047, 0x6AA0, 0x8047, 0x6AA0, 0xFFFF, 0x803E, 0x6E19, 0x867C, 0x6E71, 0x8C65, 0x6F75, 0x91D7, 0x711B, 0x96AD, 0x735B, 0x9ABC, 0x762C, 0x9DA2, 0x794C, 0x9F5F, 0x7CA2, 0x9FF3, 0x8011, 0x9F5E, 0x8380, 0x9DA1, 0x86D5, 0x9ABA, 0x89F6, 0x96AB, 0x8CC7, 0x91D6, 0x8F08, 0x8C65, 0x90AD, 0x867C, 0x91B1, 0x803D, 0x9209, 0x7A00, 0x91B1, 0x7416, 0x90AD, 0x6EA6, 0x8F08, 0x69D0, 0x8CC7, 0x65D6, 0x8A0A, 0x62EE, 0x86F4, 0x6125, 0x839B, 0x6089, 0x8011, 0x6124, 0x7C88, 0x62ED, 0x792E, 0x65D6, 0x7619, 0x69CF, 0x735B, 0x6EA5, 0x711B, 0x7416, 0x6F75, 0x7A00, 0x6E71, 0x803E, 0x6E19, 0x803E, 0x6E19, 0xFFFF, 0x803E, 0x6EB2, 0x7A5A, 0x6F04, 0x74B2, 0x6FF8, 0x6F4B, 0x7194, 0x6A8F, 0x73C7, 0x66A2, 0x7681, 0x63D5, 0x7986, 0x6226, 0x7CBF, 0x6197, 0x8011, 0x6226, 0x8363, 0x63D5, 0x869C, 0x66A2, 0x89A2, 0x6A8F, 0x8C5B, 0x6F4B, 0x8E8E, 0x74B2, 0x902B, 0x7A5A, 0x911E, 0x803D, 0x9170, 0x803E, 0x9170, 0x8621, 0x911E, 0x8BCA, 0x902B, 0x9130, 0x8E8E, 0x95ED, 0x8C5B, 0x99CF, 0x89AB, 0x9CA7, 0x869C, 0x9E55, 0x8367, 0x9EE5, 0x8011, 0x9E55, 0x7CBB, 0x9CA7, 0x7986, 0x99CF, 0x7677, 0x95ED, 0x73C7, 0x9130, 0x7194, 0x8BCA, 0x6FF8, 0x8621, 0x6F04, 0x803E, 0x6EB2, 0x803E, 0x6EB2, 0xFFFF, 0x80BC, 0x6FD7, 0x80AF, 0x71D8, 0x7FC8, 0x71D9, 0x7FB7, 0x6FD8, 0x80BC, 0x6FD7, 0x80BC, 0x6FD7, 0xFFFF, 0x83CB, 0x6FF6, 0x84CD, 0x700B, 0x843E, 0x7206, 0x835B, 0x71F4, 0xFFFF, 0x7CA9, 0x6FF8, 0x7D1A, 0x71F5, 0x7C37, 0x7207, 0x7BA7, 0x700D, 0x7CA9, 0x6FF8, 0x7CA9, 0x6FF8, 0xFFFF, 0x87CD, 0x7068, 0x88C7, 0x7092, 0x87BA, 0x727C, 0x86DF, 0x7258, 0xFFFF, 0x78A8, 0x706B, 0x7997, 0x725A, 0x78BA, 0x727E, 0x77AD, 0x7095, 0x78A8, 0x706B, 0x78A8, 0x706B, 0xFFFF, 0x6700, 0x708A, 0x6880, 0x70E5, 0x6920, 0x71BF, 0x6880, 0x7299, 0x66FF, 0x72F4, 0x657F, 0x7299, 0x64E0, 0x71BF, 0x657F, 0x70E4, 0x6700, 0x708A, 0x6700, 0x708A, 0xFFFF, 0x998D, 0x708C, 0x9B0E, 0x70E6, 0x9BAE, 0x71C0, 0x9B0E, 0x729B, 0x998D, 0x72F6, 0x980D, 0x729B, 0x976E, 0x71C1, 0x980D, 0x70E7, 0x998D, 0x708C, 0x998D, 0x708C, 0xFFFF, 0x8BA7, 0x712C, 0x8C95, 0x716A, 0x8B10, 0x7339, 0x8A3F, 0x7303, 0x8BA7, 0x712C, 0xFFFF, 0x74CE, 0x712F, 0x7635, 0x7307, 0x7564, 0x733C, 0x73DE, 0x716D, 0x74CE, 0x712F, 0x74CE, 0x712F, 0xFFFF, 0x8F47, 0x723F, 0x9023, 0x728E, 0x8E2D, 0x743A, 0x8D6B, 0x73F4, 0x8F47, 0x723F, 0xFFFF, 0x712D, 0x7242, 0x7308, 0x73F7, 0x7248, 0x743D, 0x7050, 0x7292, 0x712D, 0x7242, 0x712D, 0x7242, 0xFFFF, 0x803E, 0x72F6, 0x891B, 0x73F4, 0x909A, 0x76CC, 0x959F, 0x7B0B, 0x975E, 0x8011, 0x959F, 0x8517, 0x909A, 0x8957, 0x891B, 0x8C2E, 0x803E, 0x8D2B, 0x7761, 0x8C2E, 0x6FE2, 0x8957, 0x6ADD, 0x8517, 0x691E, 0x8011, 0x6ADD, 0x7B0B, 0x6FE2, 0x76CC, 0x7761, 0x73F4, 0x803E, 0x72F6, 0x803E, 0x72F6, 0xFFFF, 0x803E, 0x738F, 0x77C8, 0x7481, 0x70A0, 0x7738, 0x6BD7, 0x7B46, 0x6A2C, 0x8011, 0x6BD7, 0x84DC, 0x70A1, 0x88EA, 0x77C9, 0x8BA1, 0x803E, 0x8C93, 0x88B4, 0x8BA1, 0x8FDB, 0x88EA, 0x94A5, 0x84DD, 0x9650, 0x8011, 0x94A5, 0x7B46, 0x8FDB, 0x7738, 0x88B4, 0x7481, 0x803E, 0x738F, 0x803E, 0x738F, 0xFFFF, 0x929B, 0x739A, 0x935C, 0x73FA, 0x9100, 0x7578, 0x905A, 0x7527, 0x9175, 0x745E, 0xFFFF, 0x6DDC, 0x739D, 0x7022, 0x7527, 0x6F74, 0x757C, 0x6D16, 0x73FF, 0x6DDC, 0x739D, 0x6DDC, 0x739D, 0xFFFF, 0x9589, 0x7533, 0x9634, 0x75A4, 0x937E, 0x76ED, 0x92E8, 0x768B, 0xFFFF, 0x6AEB, 0x7539, 0x6D8D, 0x7690, 0x6CFB, 0x76F0, 0x6CEC, 0x76FA, 0x6BED, 0x7674, 0x6A40, 0x75A9, 0x6A45, 0x75A7, 0x6AEB, 0x7539, 0x6AEB, 0x7539, 0xFFFF, 0x980B, 0x7707, 0x989A, 0x7784, 0x9597, 0x7892, 0x951A, 0x7825, 0xFFFF, 0x686A, 0x770C, 0x6B5B, 0x782A, 0x6ADF, 0x7897, 0x67DD, 0x7788, 0x686A, 0x770C, 0x686A, 0x770C, 0xFFFF, 0x9A12, 0x790A, 0x9A7E, 0x7991, 0x9740, 0x7A5E, 0x96E1, 0x79E8, 0x9A12, 0x790A, 0xFFFF, 0x6664, 0x790F, 0x6996, 0x79ED, 0x6937, 0x7A63, 0x65F9, 0x7996, 0x6664, 0x790F, 0x6664, 0x790F, 0xFFFF, 0x9B91, 0x7B32, 0x9BDB, 0x7BC1, 0x9870, 0x7C48, 0x9831, 0x7BCB, 0xFFFF, 0x64E6, 0x7B37, 0x6847, 0x7BD0, 0x6807, 0x7C4C, 0x649D, 0x7BC5, 0x64E6, 0x7B37, 0x64E6, 0x7B37, 0xFFFF, 0x9C82, 0x7D72, 0x9CA7, 0x7E06, 0x9925, 0x7E46, 0x9903, 0x7DC5, 0xFFFF, 0x63F7, 0x7D78, 0x6776, 0x7DC9, 0x6756, 0x7E49, 0x63D3, 0x7E0A, 0x63F7, 0x7D78, 0x63F7, 0x7D78, 0xFFFF, 0x5C87, 0x7EDB, 0x5E08, 0x7F35, 0x5EA8, 0x800F, 0x5E08, 0x80E9, 0x5C87, 0x8144, 0x5C85, 0x8144, 0x5B06, 0x80E9, 0x5A67, 0x800F, 0x5B06, 0x7F35, 0x5C87, 0x7EDB, 0x5C87, 0x7EDB, 0xFFFF, 0xA402, 0x7EDE, 0xA583, 0x7F38, 0xA623, 0x8011, 0xA623, 0x8013, 0xA583, 0x80EC, 0xA402, 0x8147, 0xA281, 0x80ED, 0xA1E2, 0x8013, 0xA281, 0x7F38, 0xA402, 0x7EDE, 0xA402, 0x7EDE, 0xFFFF, 0x9CE0, 0x7FC0, 0x9CE0, 0x8055, 0x9957, 0x804D, 0x9957, 0x7FCB, 0xFFFF, 0x639D, 0x7FC5, 0x6726, 0x7FCE, 0x6726, 0x8051, 0x639D, 0x805A, 0x639D, 0x7FC5, 0x639D, 0x7FC5, 0xFFFF, 0x9927, 0x81D1, 0x9CAA, 0x8210, 0x9C87, 0x82A2, 0x9907, 0x8252, 0x9927, 0x81D1, 0x9927, 0x81D1, 0xFFFF, 0x6757, 0x81D5, 0x6777, 0x8255, 0x63F9, 0x82A7, 0x63D4, 0x8214, 0xFFFF, 0x9877, 0x83CF, 0x9BE2, 0x8455, 0x9B99, 0x84E3, 0x9838, 0x844C, 0x9877, 0x83CF, 0x9877, 0x83CF, 0xFFFF, 0x6808, 0x83D3, 0x6848, 0x8450, 0x64E7, 0x84E8, 0x649E, 0x845A, 0xFFFF, 0x9749, 0x85B9, 0x9A88, 0x8684, 0x9A1D, 0x870C, 0x96EB, 0x862E, 0x9749, 0x85B9, 0x9749, 0x85B9, 0xFFFF, 0x6938, 0x85BD, 0x6997, 0x8634, 0x6665, 0x8710, 0x65F9, 0x8689, 0xFFFF, 0x95A2, 0x8785, 0x98A5, 0x8892, 0x9818, 0x890F, 0x9527, 0x87F2, 0x95A2, 0x8785, 0x95A2, 0x8785, 0xFFFF, 0x6ADF, 0x878A, 0x6B5B, 0x87F8, 0x686A, 0x8914, 0x67DC, 0x8897, 0x6ADF, 0x878A, 0xFFFF, 0x6CF7, 0x892F, 0x6D8D, 0x8991, 0x6AEB, 0x8AE9, 0x6A40, 0x8A79, 0xFFFF, 0x9380, 0x8932, 0x9645, 0x8A72, 0x963E, 0x8A77, 0x9599, 0x8AE3, 0x92F5, 0x898D, 0x9380, 0x8932, 0x9380, 0x8932, 0xFFFF, 0x9110, 0x8AA1, 0x936F, 0x8C1F, 0x92AA, 0x8C80, 0x9064, 0x8AF7, 0x9110, 0x8AA1, 0x9110, 0x8AA1, 0xFFFF, 0x6F73, 0x8AA5, 0x7021, 0x8AFB, 0x7035, 0x8B04, 0x6DED, 0x8C8B, 0x6DE1, 0x8C87, 0x6D17, 0x8C23, 0xFFFF, 0x8E3E, 0x8BE1, 0x9037, 0x8D8B, 0x8F59, 0x8DDC, 0x8D7C, 0x8C27, 0x8E3E, 0x8BE1, 0x8E3E, 0x8BE1, 0xFFFF, 0x7259, 0x8BEB, 0x731B, 0x8C31, 0x7140, 0x8DE7, 0x7064, 0x8D97, 0xFFFF, 0x8B21, 0x8CE3, 0x8CA9, 0x8EB2, 0x8BBA, 0x8EEF, 0x8A51, 0x8D18, 0x8B21, 0x8CE3, 0x8B21, 0x8CE3, 0xFFFF, 0x7576, 0x8CEB, 0x7648, 0x8D20, 0x74E0, 0x8EF8, 0x73F2, 0x8EBB, 0xFFFF, 0x66F3, 0x8D2F, 0x6874, 0x8D8A, 0x687D, 0x8D8F, 0x6886, 0x8D94, 0x6926, 0x8E6E, 0x6887, 0x8F48, 0x6705, 0x8FA2, 0x6584, 0x8F49, 0x657F, 0x8F45, 0x6570, 0x8F3E, 0x6573, 0x8F3E, 0x64D3, 0x8E63, 0x6573, 0x8D89, 0x66F3, 0x8D2F, 0x66F3, 0x8D2F, 0xFFFF, 0x9993, 0x8D31, 0x9B13, 0x8D8C, 0x9BB4, 0x8E66, 0x9B16, 0x8F40, 0x9993, 0x8F9A, 0x9814, 0x8F40, 0x9774, 0x8E66, 0x9812, 0x8D8C, 0x9993, 0x8D31, 0x9993, 0x8D31, 0xFFFF, 0x87CD, 0x8DA1, 0x88DC, 0x8F8B, 0x87E0, 0x8FB5, 0x86F0, 0x8DC6, 0x87CD, 0x8DA1, 0x87CD, 0x8DA1, 0xFFFF, 0x78CD, 0x8DA8, 0x79A8, 0x8DCB, 0x78BC, 0x8FBB, 0x77C1, 0x8F92, 0xFFFF, 0x8450, 0x8E19, 0x84E2, 0x9014, 0x83E0, 0x9029, 0x836C, 0x8E2C, 0x8450, 0x8E19, 0x8450, 0x8E19, 0xFFFF, 0x7C48, 0x8E1C, 0x7D2B, 0x8E2E, 0x7CBD, 0x902C, 0x7BBB, 0x9017, 0x7C48, 0x8E1C, 0xFFFF, 0x80BF, 0x8E49, 0x80D2, 0x904A, 0x7FCC, 0x904A, 0x7FD9, 0x8E49, 0x80BF, 0x8E49, 0x80BF, 0x8E49, 0xFFFF, 0x804F, 0x9321, 0x81D0, 0x937A, 0x8271, 0x9455, 0x81D1, 0x952F, 0x8051, 0x958A, 0x7ECF, 0x9530, 0x7E2F, 0x9456, 0x7ECE, 0x937B, 0x804F, 0x9321, 0x804F, 0x9321, 0xFFFF, 0x8048, 0x46D9, 0x27BC, 0x9DBA, 0xD8D3, 0x9DBA, 0xFFFF, 0x8048, 0x4BC9, 0x952E, 0x604A, 0x6B62, 0x604A, 0xFFFF, 0x68D2, 0x62CE, 0x97BF, 0x62CE, 0xB9BA, 0x8427, 0xA239, 0x9B36, 0x5E16, 0x9B36, 0x46B6, 0x8446, 0x68D2, 0x62CE, 0xFFFF, 0xBC3E, 0x869F, 0xD13B, 0x9B36, 0xA742, 0x9B36, 0xFFFF, 0x4431, 0x86BE, 0x590E, 0x9B36, 0x2F54, 0x9B36, 0x4431, 0x86BE}; + +const PROGMEM uint16_t logo_white[] = {0x80BC, 0x6FD7, 0x80AF, 0x71D8, 0x7FC8, 0x71D9, 0x7FB7, 0x6FD8, 0x80BC, 0x6FD7, 0xFFFF, 0x83CB, 0x6FF6, 0x84CD, 0x700B, 0x843E, 0x7206, 0x835B, 0x71F4, 0xFFFF, 0x7CA9, 0x6FF8, 0x7D1A, 0x71F5, 0x7C37, 0x7207, 0x7BA7, 0x700D, 0x7CA9, 0x6FF8, 0x7CA9, 0x6FF8, 0xFFFF, 0x87CD, 0x7068, 0x88C7, 0x7092, 0x87BA, 0x727C, 0x86DF, 0x7258, 0xFFFF, 0x78A8, 0x706B, 0x7997, 0x725A, 0x78BA, 0x727E, 0x77AD, 0x7095, 0x78A8, 0x706B, 0x78A8, 0x706B, 0xFFFF, 0x8BA7, 0x712C, 0x8C95, 0x716A, 0x8B10, 0x7339, 0x8A3F, 0x7303, 0xFFFF, 0x74CE, 0x712F, 0x7635, 0x7307, 0x7564, 0x733C, 0x73DE, 0x716D, 0x74CE, 0x712F, 0x74CE, 0x712F, 0xFFFF, 0x8F47, 0x723F, 0x9023, 0x728E, 0x8E2D, 0x743A, 0x8D6B, 0x73F4, 0xFFFF, 0x712D, 0x7242, 0x7309, 0x73F7, 0x7248, 0x743D, 0x7050, 0x7292, 0x712D, 0x7242, 0x712D, 0x7242, 0xFFFF, 0x929B, 0x739A, 0x935C, 0x73FA, 0x9100, 0x7578, 0x905A, 0x7527, 0xFFFF, 0x6DDC, 0x739D, 0x7022, 0x7527, 0x6F74, 0x757C, 0x6D16, 0x73FF, 0x6DDC, 0x739D, 0x6DDC, 0x739D, 0xFFFF, 0x9589, 0x7533, 0x9634, 0x75A4, 0x937E, 0x76ED, 0x92E8, 0x768B, 0xFFFF, 0x6AEB, 0x7539, 0x6D8D, 0x7690, 0x6CFB, 0x76F0, 0x6A40, 0x75A9, 0x6AEB, 0x7539, 0xFFFF, 0x980B, 0x7707, 0x989A, 0x7784, 0x9597, 0x7892, 0x951A, 0x7825, 0xFFFF, 0x686A, 0x770C, 0x6B5B, 0x782A, 0x6ADF, 0x7897, 0x67DD, 0x7788, 0x686A, 0x770C, 0x686A, 0x770C, 0xFFFF, 0x9A12, 0x790A, 0x9A7E, 0x7991, 0x9740, 0x7A5E, 0x96E1, 0x79E8, 0xFFFF, 0x6664, 0x790F, 0x6996, 0x79ED, 0x6937, 0x7A63, 0x65F9, 0x7996, 0x6664, 0x790F, 0x6664, 0x790F, 0xFFFF, 0x9B91, 0x7B32, 0x9BDB, 0x7BC1, 0x9870, 0x7C48, 0x9831, 0x7BCC, 0xFFFF, 0x64E6, 0x7B37, 0x6847, 0x7BD0, 0x6807, 0x7C4C, 0x649D, 0x7BC5, 0x64E6, 0x7B37, 0x64E6, 0x7B37, 0xFFFF, 0x9C82, 0x7D72, 0x9CA7, 0x7E06, 0x9925, 0x7E46, 0x9903, 0x7DC5, 0xFFFF, 0x63F7, 0x7D78, 0x6776, 0x7DC9, 0x6756, 0x7E49, 0x63D3, 0x7E0A, 0x63F7, 0x7D78, 0x63F7, 0x7D78, 0xFFFF, 0x9CE0, 0x7FC0, 0x9CE0, 0x8055, 0x9957, 0x804D, 0x9957, 0x7FCB, 0xFFFF, 0x639D, 0x7FC5, 0x6726, 0x7FCE, 0x6726, 0x8051, 0x639D, 0x805A, 0x639D, 0x7FC5, 0xFFFF, 0x9927, 0x81D1, 0x9CAA, 0x8210, 0x9C87, 0x82A2, 0x9907, 0x8252, 0x9927, 0x81D1, 0x9927, 0x81D1, 0xFFFF, 0x6757, 0x81D5, 0x6777, 0x8256, 0x63F9, 0x82A7, 0x63D4, 0x8214, 0xFFFF, 0x9877, 0x83CF, 0x9BE2, 0x8455, 0x9B99, 0x84E3, 0x9838, 0x844C, 0x9877, 0x83CF, 0xFFFF, 0x6808, 0x83D3, 0x6848, 0x8450, 0x64E7, 0x84E8, 0x649E, 0x845A, 0xFFFF, 0x9749, 0x85B9, 0x9A88, 0x8684, 0x9A1D, 0x870C, 0x96EB, 0x862E, 0x9749, 0x85B9, 0x9749, 0x85B9, 0xFFFF, 0x6938, 0x85BD, 0x6997, 0x8634, 0x6665, 0x8710, 0x65F9, 0x8689, 0xFFFF, 0x95A2, 0x8785, 0x98A5, 0x8892, 0x9818, 0x890F, 0x9527, 0x87F2, 0x95A2, 0x8785, 0x95A2, 0x8785, 0xFFFF, 0x6ADF, 0x878A, 0x6B5B, 0x87F8, 0x686A, 0x8915, 0x67DC, 0x8897, 0xFFFF, 0x6CF7, 0x8930, 0x6D8D, 0x8991, 0x6AEB, 0x8AE9, 0x6A40, 0x8A79, 0xFFFF, 0x9380, 0x8932, 0x9645, 0x8A72, 0x9599, 0x8AE3, 0x92F5, 0x898D, 0x9380, 0x8932, 0xFFFF, 0x9110, 0x8AA1, 0x936F, 0x8C1F, 0x92AA, 0x8C80, 0x9064, 0x8AF7, 0x9110, 0x8AA1, 0x9110, 0x8AA1, 0xFFFF, 0x6F73, 0x8AA5, 0x7021, 0x8AFB, 0x6DED, 0x8C8C, 0x6D17, 0x8C23, 0xFFFF, 0x8E3E, 0x8BE1, 0x9037, 0x8D8B, 0x8F59, 0x8DDC, 0x8D7C, 0x8C27, 0x8E3E, 0x8BE1, 0x8E3E, 0x8BE1, 0xFFFF, 0x7259, 0x8BEB, 0x731B, 0x8C31, 0x7140, 0x8DE7, 0x7064, 0x8D97, 0xFFFF, 0x8B21, 0x8CE3, 0x8CA9, 0x8EB2, 0x8BBA, 0x8EEF, 0x8A51, 0x8D18, 0x8B21, 0x8CE3, 0x8B21, 0x8CE3, 0xFFFF, 0x7576, 0x8CEB, 0x7648, 0x8D20, 0x74E0, 0x8EF8, 0x73F2, 0x8EBB, 0xFFFF, 0x87CD, 0x8DA1, 0x88DC, 0x8F8B, 0x87E0, 0x8FB5, 0x86F0, 0x8DC6, 0x87CD, 0x8DA1, 0x87CD, 0x8DA1, 0xFFFF, 0x78CC, 0x8DA8, 0x79A8, 0x8DCB, 0x78BC, 0x8FBB, 0x77C0, 0x8F92, 0xFFFF, 0x8450, 0x8E19, 0x84E2, 0x9014, 0x83E0, 0x9029, 0x836C, 0x8E2C, 0x8450, 0x8E19, 0x8450, 0x8E19, 0xFFFF, 0x7C48, 0x8E1C, 0x7D2B, 0x8E2E, 0x7CBD, 0x902C, 0x7BBB, 0x9017, 0xFFFF, 0x80BE, 0x8E49, 0x80D1, 0x904A, 0x7FCC, 0x904A, 0x7FD9, 0x8E49, 0x80BE, 0x8E49, 0xFFFF, 0x8276, 0x75D6, 0x83AF, 0x75FE, 0x8436, 0x7628, 0x84AE, 0x7661, 0x8542, 0x7706, 0x8512, 0x77BA, 0x8457, 0x7845, 0x8335, 0x788B, 0x8318, 0x7882, 0x82D8, 0x7860, 0x831E, 0x7830, 0x8353, 0x7823, 0x83E6, 0x77F9, 0x8464, 0x7790, 0x847A, 0x771A, 0x8415, 0x76B7, 0x83B6, 0x7691, 0x8351, 0x7676, 0x827F, 0x7662, 0x81BB, 0x7687, 0x8161, 0x76AF, 0x8123, 0x76DA, 0x80E5, 0x771A, 0x80C5, 0x774D, 0x80B8, 0x77C1, 0x80D1, 0x77EE, 0x8107, 0x7814, 0x81CC, 0x786B, 0x837F, 0x7918, 0x8464, 0x7983, 0x84C0, 0x79B2, 0x852D, 0x79FD, 0x859D, 0x7ABC, 0x858E, 0x7B79, 0x8545, 0x7C25, 0x84D9, 0x7CC5, 0x8469, 0x7D4D, 0x843B, 0x7DCD, 0x8555, 0x7DA8, 0x85D3, 0x7D67, 0x870D, 0x7CA0, 0x87E0, 0x7BC0, 0x880D, 0x7B5B, 0x886D, 0x7A46, 0x88B3, 0x799B, 0x88CC, 0x7970, 0x893A, 0x78EA, 0x8995, 0x78A8, 0x8A01, 0x786F, 0x8AF8, 0x781F, 0x8BA6, 0x77FD, 0x8C0C, 0x77EF, 0x8C96, 0x77FB, 0x8D1D, 0x7815, 0x8D59, 0x7826, 0x8E40, 0x7889, 0x8EDB, 0x7925, 0x8EFC, 0x797B, 0x8EFF, 0x79D4, 0x8E71, 0x7A7B, 0x8D58, 0x7AD2, 0x8C23, 0x7ADE, 0x8AFF, 0x7A97, 0x8AF5, 0x7A81, 0x8AEF, 0x7A4E, 0x8B68, 0x7A52, 0x8B96, 0x7A5F, 0x8C39, 0x7A87, 0x8D33, 0x7A7F, 0x8E07, 0x7A3F, 0x8E66, 0x79CB, 0x8E63, 0x7985, 0x8E43, 0x793F, 0x8DC6, 0x78C6, 0x8CFA, 0x7876, 0x8C7E, 0x785F, 0x8C18, 0x7857, 0x8B84, 0x7874, 0x8B22, 0x788F, 0x8A7D, 0x78CA, 0x8A2E, 0x78F9, 0x89F0, 0x7930, 0x89A3, 0x79A5, 0x8979, 0x7AC0, 0x897C, 0x7B9C, 0x8972, 0x7BF2, 0x88CC, 0x7D32, 0x87B7, 0x7E4C, 0x8665, 0x7F52, 0x8660, 0x7F5A, 0x878F, 0x7F01, 0x88AE, 0x7EC2, 0x89FD, 0x7E9E, 0x8B8D, 0x7EC6, 0x8C40, 0x7F0E, 0x8CB6, 0x7F68, 0x8D1D, 0x7FD7, 0x8DFA, 0x80BD, 0x8EA8, 0x816E, 0x8F34, 0x81D4, 0x8F8A, 0x81F9, 0x8FDA, 0x820A, 0x90AB, 0x820F, 0x9120, 0x81FF, 0x91A5, 0x81DC, 0x91F4, 0x81B8, 0x922C, 0x8198, 0x9288, 0x812B, 0x927D, 0x80AB, 0x9252, 0x8068, 0x921C, 0x8033, 0x9174, 0x7FEB, 0x9099, 0x7FEB, 0x8FCF, 0x8029, 0x8F5D, 0x808D, 0x8F47, 0x80A4, 0x8ED4, 0x80A4, 0x8EC5, 0x8070, 0x8F65, 0x7FE6, 0x906D, 0x7F92, 0x91A4, 0x7F90, 0x92A8, 0x7FF7, 0x92FC, 0x8043, 0x9331, 0x8090, 0x9349, 0x813D, 0x92D1, 0x81E3, 0x9264, 0x8227, 0x91E5, 0x825B, 0x915D, 0x8280, 0x90D3, 0x8296, 0x8FA0, 0x829A, 0x8F2C, 0x8286, 0x8EE7, 0x8273, 0x8E78, 0x824A, 0x8DA9, 0x81D4, 0x8CB9, 0x8127, 0x8B68, 0x802C, 0x8B22, 0x8001, 0x8AC3, 0x7FE7, 0x8A50, 0x7FF4, 0x88FD, 0x8068, 0x87A4, 0x811D, 0x879E, 0x812D, 0x8904, 0x81F1, 0x89D4, 0x8285, 0x8A7C, 0x8343, 0x8A94, 0x8431, 0x8A4E, 0x84A1, 0x89E8, 0x850E, 0x892F, 0x85E5, 0x88B0, 0x86E5, 0x88C0, 0x8757, 0x88F2, 0x878D, 0x8927, 0x87AD, 0x8ABF, 0x8821, 0x8B0E, 0x881E, 0x8B70, 0x8811, 0x8C1B, 0x87D6, 0x8C9B, 0x8776, 0x8CC4, 0x873D, 0x8CD3, 0x8705, 0x8CA2, 0x86A3, 0x8C06, 0x8662, 0x8B39, 0x864F, 0x8A77, 0x8662, 0x89F9, 0x864D, 0x8A10, 0x8606, 0x8A66, 0x85F7, 0x8B35, 0x85DC, 0x8C50, 0x85FD, 0x8D3C, 0x8663, 0x8D94, 0x870A, 0x8D7D, 0x875F, 0x8D3A, 0x87B8, 0x8CB1, 0x882D, 0x8BC1, 0x888C, 0x8B30, 0x88A7, 0x8A8D, 0x88AE, 0x89EE, 0x8898, 0x896E, 0x887E, 0x8869, 0x882D, 0x87EE, 0x87EA, 0x87A4, 0x87A8, 0x878E, 0x8785, 0x874D, 0x86E3, 0x875D, 0x8637, 0x87FD, 0x8466, 0x8705, 0x835A, 0x86B8, 0x8359, 0x84A4, 0x8358, 0x7F20, 0x851B, 0x7F13, 0x864D, 0x8016, 0x86F9, 0x818E, 0x87D8, 0x823B, 0x8869, 0x8272, 0x88C9, 0x8276, 0x8915, 0x8266, 0x893D, 0x81FB, 0x89D8, 0x8197, 0x8A21, 0x8119, 0x8A62, 0x80A7, 0x8A8A, 0x8016, 0x8AAA, 0x7EDC, 0x8AAE, 0x7DC5, 0x8A63, 0x7D55, 0x8A29, 0x7CFA, 0x89E5, 0x7CAD, 0x8939, 0x7D1B, 0x8895, 0x7E00, 0x8825, 0x7F27, 0x8800, 0x7F66, 0x880F, 0x7F69, 0x8850, 0x7E49, 0x8873, 0x7D9A, 0x88C9, 0x7D4F, 0x893E, 0x7D8B, 0x89B2, 0x7DD8, 0x89E6, 0x7E36, 0x8A10, 0x7F02, 0x8A40, 0x7FDB, 0x8A34, 0x8046, 0x8A16, 0x8091, 0x89F5, 0x80A5, 0x89EB, 0x80FE, 0x89AB, 0x8126, 0x8981, 0x8159, 0x8918, 0x814F, 0x88E6, 0x8128, 0x88B8, 0x8094, 0x8856, 0x7EFC, 0x8796, 0x7D74, 0x86E7, 0x7D3D, 0x86C5, 0x7CD8, 0x8674, 0x7C98, 0x8605, 0x7CA0, 0x8536, 0x7D7C, 0x83E6, 0x7E07, 0x8357, 0x7DED, 0x835B, 0x79CC, 0x843E, 0x7962, 0x8448, 0x77CB, 0x8450, 0x76F3, 0x8438, 0x763E, 0x841E, 0x7502, 0x83FE, 0x746C, 0x83FD, 0x73E4, 0x840A, 0x72CE, 0x8444, 0x729B, 0x8457, 0x71E6, 0x84B7, 0x71B5, 0x84EB, 0x719B, 0x853B, 0x719B, 0x8558, 0x71D4, 0x85E0, 0x72B0, 0x8642, 0x73D4, 0x8661, 0x74B3, 0x8616, 0x74AD, 0x84D7, 0x74B2, 0x84B3, 0x74B5, 0x849B, 0x751E, 0x8496, 0x753B, 0x84B8, 0x75C5, 0x856E, 0x756D, 0x865A, 0x74D0, 0x86B8, 0x73FA, 0x86EA, 0x7250, 0x86CF, 0x70E7, 0x863F, 0x707E, 0x85C8, 0x705F, 0x8549, 0x7075, 0x84CC, 0x70AC, 0x8475, 0x70CD, 0x8452, 0x71FF, 0x839C, 0x7287, 0x8376, 0x736A, 0x833A, 0x7443, 0x8319, 0x751E, 0x8311, 0x76AC, 0x8327, 0x77C4, 0x8341, 0x7810, 0x8340, 0x799F, 0x8313, 0x7A2A, 0x82EA, 0x7B24, 0x8281, 0x7BE4, 0x820C, 0x7BEC, 0x81B1, 0x7A5E, 0x81C8, 0x7809, 0x81ED, 0x7751, 0x81F8, 0x7664, 0x81EF, 0x7571, 0x81B4, 0x74BB, 0x8141, 0x7483, 0x80F9, 0x7408, 0x802F, 0x73D9, 0x7FEB, 0x7359, 0x7F50, 0x72A0, 0x7EC4, 0x719E, 0x7E89, 0x7074, 0x7EA8, 0x7015, 0x7ECC, 0x6FD0, 0x7EF8, 0x6FA3, 0x7F19, 0x6F6B, 0x7FBB, 0x6F93, 0x8017, 0x6FA7, 0x8032, 0x6FD7, 0x805A, 0x70DF, 0x8092, 0x7205, 0x805A, 0x729E, 0x7FCB, 0x72B3, 0x7FBC, 0x7309, 0x7FA6, 0x733B, 0x7FDE, 0x72F9, 0x804B, 0x726D, 0x80A7, 0x70E6, 0x80FB, 0x700D, 0x80EC, 0x6F48, 0x80A8, 0x6EFC, 0x8073, 0x6EC1, 0x8026, 0x6E93, 0x7FCC, 0x6ED4, 0x7ED8, 0x6F54, 0x7E72, 0x6FCB, 0x7E3A, 0x700B, 0x7E25, 0x71AB, 0x7DED, 0x7356, 0x7E3E, 0x7472, 0x7EF4, 0x7536, 0x7FBD, 0x75DA, 0x8075, 0x7628, 0x80B6, 0x767B, 0x80D8, 0x76D9, 0x80EF, 0x7755, 0x80FC, 0x7881, 0x80D5, 0x7931, 0x8093, 0x7A00, 0x801E, 0x799B, 0x7D9B, 0x789A, 0x7CD8, 0x77C0, 0x7BE5, 0x7783, 0x7B55, 0x7787, 0x7AB9, 0x77AE, 0x7A67, 0x77E6, 0x7A1D, 0x781E, 0x79CD, 0x785E, 0x7909, 0x7853, 0x78C0, 0x7823, 0x788B, 0x7808, 0x7875, 0x7649, 0x77E8, 0x74B6, 0x7869, 0x7488, 0x78B3, 0x7472, 0x7901, 0x74D2, 0x796F, 0x75D8, 0x799A, 0x76EE, 0x7971, 0x774A, 0x797A, 0x7751, 0x79B4, 0x76A0, 0x79F0, 0x75E4, 0x7A0A, 0x7454, 0x79E1, 0x73AF, 0x7986, 0x7369, 0x7909, 0x7374, 0x7891, 0x739D, 0x783C, 0x73B6, 0x781E, 0x74B7, 0x7768, 0x765D, 0x772C, 0x77ED, 0x7769, 0x7932, 0x77FC, 0x7979, 0x7836, 0x79B8, 0x787B, 0x79DF, 0x7912, 0x7998, 0x7A14, 0x7967, 0x7AB4, 0x796A, 0x7AD8, 0x79C5, 0x7B60, 0x7A9D, 0x7BE9, 0x7B72, 0x7C47, 0x7EBA, 0x7BD6, 0x8206, 0x7CA8, 0x82FA, 0x7C2E, 0x8391, 0x7BB4, 0x83F6, 0x7B40, 0x8413, 0x7AD0, 0x83DD, 0x7A71, 0x838A, 0x7A39, 0x8296, 0x79B7, 0x80F3, 0x78FA, 0x8016, 0x788A, 0x7FB4, 0x7833, 0x7F8D, 0x77DF, 0x7F92, 0x77A9, 0x7FB3, 0x7718, 0x7FF6, 0x76C2, 0x8036, 0x768A, 0x8097, 0x764A, 0x80DF, 0x762A, 0x813C, 0x7605, 0x8275, 0x75D5}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/colors.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/colors.h new file mode 100644 index 000000000..1dae8de4b --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/colors.h @@ -0,0 +1,117 @@ +/************ + * colors.h * + ************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +namespace Theme { + + #define COLOR_CORRECTION(rgb) ( \ + (uint32_t((((rgb) & 0xFF0000) >> 16) * 1.00) << 16) | \ + (uint32_t((((rgb) & 0x00FF00) >> 8) * 1.00) << 8) | \ + (uint32_t((((rgb) & 0x0000FF) >> 0) * .75) << 0)) + + #define COLOR_BLEND(a,b,f) COLOR_CORRECTION( \ + (uint32_t((((a) & 0xFF0000) >> 16) * f + (((b) & 0xFF0000) >> 16) * (1-f)) << 16) | \ + (uint32_t((((a) & 0x00FF00) >> 8) * f + (((b) & 0x00FF00) >> 8) * (1-f)) << 8) | \ + (uint32_t((((a) & 0x0000FF) >> 0) * f + (((b) & 0x0000FF) >> 0) * (1-f)) << 0)) + + constexpr uint32_t lulzbot_bg = 0xDEEA5C; + constexpr uint32_t lulzbot_fg = 0xC1D82F; + + constexpr uint32_t lulzbot_green = COLOR_BLEND(0xC1DB2F,0x788814,0.33); + + #ifndef LULZBOT_USE_BIOPRINTER_UI + constexpr uint32_t theme_darkest = COLOR_CORRECTION(0x444444); + constexpr uint32_t theme_dark = COLOR_CORRECTION(0x777777); + + constexpr uint32_t bg_color = theme_darkest; + constexpr uint32_t bg_text_disabled = theme_dark; + constexpr uint32_t bg_text_enabled = 0xFFFFFF; + constexpr uint32_t bg_normal = theme_darkest; + + constexpr uint32_t fg_normal = theme_dark; + constexpr uint32_t fg_action = lulzbot_green; + constexpr uint32_t fg_disabled = bg_color; + #else + constexpr uint32_t theme_darkest = 0x545923; + constexpr uint32_t theme_dark = lulzbot_bg; + + constexpr uint32_t bg_color = 0xFFFFFF; + constexpr uint32_t bg_text_disabled = 0x333333; + constexpr uint32_t bg_text_enabled = theme_darkest; + constexpr uint32_t bg_normal = theme_dark; + + constexpr uint32_t fg_normal = theme_darkest; + constexpr uint32_t fg_action = theme_dark; + constexpr uint32_t fg_disabled = 0xEFEFEF; + + constexpr uint32_t shadow_rgb = 0xE0E0E0; + constexpr uint32_t fill_rgb = lulzbot_fg; + constexpr uint32_t stroke_rgb = theme_darkest; + constexpr uint32_t syringe_rgb = 0xF1F6C0; + #endif + + constexpr uint32_t x_axis = COLOR_CORRECTION(0xFF0000); + constexpr uint32_t y_axis = COLOR_CORRECTION(0x00BB00); + constexpr uint32_t z_axis = COLOR_CORRECTION(0x0000FF); + #ifndef LULZBOT_USE_BIOPRINTER_UI + constexpr uint32_t e_axis = COLOR_CORRECTION(0x777777); + constexpr uint32_t feedrate = COLOR_CORRECTION(0x777777); + constexpr uint32_t other = COLOR_CORRECTION(0x777777); + #else + constexpr uint32_t e_axis = 0x000000; + constexpr uint32_t feedrate = 0x000000; + constexpr uint32_t other = 0x000000; + #endif + + // Status screen + constexpr uint32_t progress = theme_dark; + constexpr uint32_t status_msg = theme_dark; + constexpr uint32_t fan_speed = COLOR_CORRECTION(0x3771CB); + constexpr uint32_t temp = COLOR_CORRECTION(0x892ca0); + constexpr uint32_t axis_label = theme_dark; + + constexpr uint32_t disabled_icon = 0x101010; + + // Calibration Registers Screen + constexpr uint32_t transformA = 0x3010D0; + constexpr uint32_t transformB = 0x4010D0; + constexpr uint32_t transformC = 0x5010D0; + constexpr uint32_t transformD = 0x6010D0; + constexpr uint32_t transformE = 0x7010D0; + constexpr uint32_t transformF = 0x8010D0; + constexpr uint32_t transformVal = 0x104010; + + constexpr btn_colors disabled_btn = {.bg = bg_color, .grad = fg_disabled, .fg = fg_disabled, .rgb = fg_disabled }; + constexpr btn_colors normal_btn = {.bg = fg_action, .grad = 0xFFFFFF, .fg = fg_normal, .rgb = 0xFFFFFF }; + constexpr btn_colors action_btn = {.bg = bg_color, .grad = 0xFFFFFF, .fg = fg_action, .rgb = 0xFFFFFF }; + constexpr btn_colors red_btn = {.bg = 0xFF5555, .grad = 0xFFFFFF, .fg = 0xFF0000, .rgb = 0xFFFFFF }; + constexpr btn_colors ui_slider = {.bg = theme_darkest, .grad = 0xFFFFFF, .fg = theme_dark, .rgb = lulzbot_green }; + constexpr btn_colors ui_toggle = {.bg = theme_darkest, .grad = 0xFFFFFF, .fg = theme_dark, .rgb = 0xFFFFFF }; + + // Temperature color scale + + const rgb_t cool_rgb ( 0, 0, 0); + const rgb_t low_rgb (128, 0, 0); + const rgb_t med_rgb (255, 128, 0); + const rgb_t high_rgb (255, 255, 128); +}; diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/fonts.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/fonts.h new file mode 100644 index 000000000..3e5a985cc --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/fonts.h @@ -0,0 +1,80 @@ +/*********** + * fonts.h * + ***********/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +namespace Theme { + #ifdef TOUCH_UI_800x480 + #ifdef TOUCH_UI_PORTRAIT + constexpr int16_t font_tiny = 26; + constexpr int16_t font_xsmall = 28; + constexpr int16_t font_small = 29; + constexpr int16_t font_medium = 30; + constexpr int16_t font_large = 30; + constexpr int16_t font_xlarge = 31; + #else + constexpr int16_t font_tiny = 27; + constexpr int16_t font_xsmall = 29; + constexpr int16_t font_small = 30; + constexpr int16_t font_medium = 30; + constexpr int16_t font_large = 31; + constexpr int16_t font_xlarge = 31; + #endif + constexpr float icon_scale = 1.0; + #elif defined(TOUCH_UI_480x272) + #ifdef TOUCH_UI_PORTRAIT + constexpr int16_t font_tiny = 26; + constexpr int16_t font_xsmall = 26; + constexpr int16_t font_small = 26; + constexpr int16_t font_medium = 27; + constexpr int16_t font_large = 28; + constexpr int16_t font_xlarge = 29; + constexpr float icon_scale = 0.7; + #else + constexpr int16_t font_tiny = 26; + constexpr int16_t font_xsmall = 26; + constexpr int16_t font_small = 27; + constexpr int16_t font_medium = 28; + constexpr int16_t font_large = 30; + constexpr int16_t font_xlarge = 31; + constexpr float icon_scale = 0.6; + #endif + #elif defined(TOUCH_UI_320x240) + #ifdef TOUCH_UI_PORTRAIT + constexpr int16_t font_tiny = 26; + constexpr int16_t font_xsmall = 26; + constexpr int16_t font_small = 26; + constexpr int16_t font_medium = 27; + constexpr int16_t font_large = 27; + constexpr int16_t font_xlarge = 28; + constexpr float icon_scale = 0.6; + #else + constexpr int16_t font_tiny = 26; + constexpr int16_t font_xsmall = 26; + constexpr int16_t font_small = 26; + constexpr int16_t font_medium = 27; + constexpr int16_t font_large = 29; + constexpr int16_t font_xlarge = 30; + constexpr float icon_scale = 0.5; + #endif + #endif +} diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.cpp new file mode 100644 index 000000000..163f7160c --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.cpp @@ -0,0 +1,410 @@ +/************** + * sounds.cpp * + **************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#include "../compat.h" + +#if ENABLED(LULZBOT_TOUCH_UI) + +#include "../ftdi_eve_lib/ftdi_eve_lib.h" + +#include "sounds.h" + +namespace Theme { + using namespace FTDI; + + const PROGMEM SoundPlayer::sound_t chimes[] = { + {CHIMES, NOTE_G3, 5}, + {CHIMES, NOTE_E4, 5}, + {CHIMES, NOTE_C4, 5}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t sad_trombone[] = { + {TRUMPET, NOTE_A3S, 10}, + {TRUMPET, NOTE_A3 , 10}, + {TRUMPET, NOTE_G3S, 10}, + {TRUMPET, NOTE_G3, 20}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t twinkle[] = { + {GLOCKENSPIEL, NOTE_C4, 1}, + {GLOCKENSPIEL, NOTE_E4, 1}, + {GLOCKENSPIEL, NOTE_G4, 16}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t fanfare[] = { + {TRUMPET, NOTE_A3, 4}, + {SILENCE, REST, 1}, + {TRUMPET, NOTE_A3, 2}, + {SILENCE, REST, 1}, + {TRUMPET, NOTE_A3, 2}, + {SILENCE, REST, 1}, + {TRUMPET, NOTE_E4, 10}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t media_inserted[] = { + {MUSIC_BOX, NOTE_C4, 2}, + {MUSIC_BOX, NOTE_E4, 2}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t media_removed[] = { + {MUSIC_BOX, NOTE_E4, 2}, + {MUSIC_BOX, NOTE_C4, 2}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t js_bach_toccata[] = { + {ORGAN, NOTE_A4, 2}, + {ORGAN, NOTE_G4, 2}, + {ORGAN, NOTE_A4, 35}, + {SILENCE, REST, 12}, + {ORGAN, NOTE_G4, 4}, + {ORGAN, NOTE_F4, 4}, + {ORGAN, NOTE_E4, 4}, + {ORGAN, NOTE_D4, 4}, + {ORGAN, NOTE_C4S, 16}, + {ORGAN, NOTE_D4, 32}, + {SILENCE, REST, 42}, + + {ORGAN, NOTE_A3, 2}, + {ORGAN, NOTE_G3, 2}, + {ORGAN, NOTE_A3, 35}, + {SILENCE, REST, 9}, + {ORGAN, NOTE_E3, 8}, + {ORGAN, NOTE_F3, 8}, + {ORGAN, NOTE_C3S, 16}, + {ORGAN, NOTE_D3, 27}, + {SILENCE, REST, 42}, + + {ORGAN, NOTE_A2, 2}, + {ORGAN, NOTE_G2, 2}, + {ORGAN, NOTE_A2, 35}, + {SILENCE, REST, 12}, + {ORGAN, NOTE_G2, 4}, + {ORGAN, NOTE_F2, 4}, + {ORGAN, NOTE_E2, 4}, + {ORGAN, NOTE_D2, 4}, + {ORGAN, NOTE_C2S, 16}, + {ORGAN, NOTE_D2, 32}, + {SILENCE, REST, 52}, + + //{ORGAN, NOTE_D1, 28}, + {ORGAN, NOTE_C3S, 9}, + {ORGAN, NOTE_E3, 9}, + {ORGAN, NOTE_G3, 9}, + {ORGAN, NOTE_A3S, 9}, + {ORGAN, NOTE_C4S, 9}, + {ORGAN, NOTE_E4, 9}, + {ORGAN, NOTE_D4, 20}, + {SILENCE, REST, 30}, + + {ORGAN, NOTE_C4S, 4}, + {ORGAN, NOTE_D4, 2}, + {ORGAN, NOTE_E4, 2}, + + {ORGAN, NOTE_C4S, 2}, + {ORGAN, NOTE_D4, 2}, + {ORGAN, NOTE_E4, 2}, + + {ORGAN, NOTE_C4S, 2}, + {ORGAN, NOTE_D4, 2}, + {ORGAN, NOTE_E4, 2}, + + {ORGAN, NOTE_C4S, 2}, + {ORGAN, NOTE_D4, 4}, + {ORGAN, NOTE_E4, 4}, + {ORGAN, NOTE_F4, 2}, + {ORGAN, NOTE_G4, 2}, + + {ORGAN, NOTE_E4, 2}, + {ORGAN, NOTE_F4, 2}, + {ORGAN, NOTE_G4, 2}, + + {ORGAN, NOTE_E4, 2}, + {ORGAN, NOTE_F4, 2}, + {ORGAN, NOTE_G4, 2}, + + {ORGAN, NOTE_E4, 2}, + {ORGAN, NOTE_F4, 4}, + {ORGAN, NOTE_G4, 4}, + {ORGAN, NOTE_A4, 2}, + {ORGAN, NOTE_A4S, 2}, + + {ORGAN, NOTE_G4, 2}, + {ORGAN, NOTE_A4, 2}, + {ORGAN, NOTE_A4S, 2}, + + {ORGAN, NOTE_G4, 2}, + {ORGAN, NOTE_A4, 2}, + {ORGAN, NOTE_A4S, 2}, + + {ORGAN, NOTE_G4, 2}, + {ORGAN, NOTE_A4, 4}, + {SILENCE, REST, 36}, + + + {ORGAN, NOTE_C5S, 4}, + {ORGAN, NOTE_D5, 2}, + {ORGAN, NOTE_E5, 2}, + + {ORGAN, NOTE_C5S, 2}, + {ORGAN, NOTE_D5, 2}, + {ORGAN, NOTE_E5, 2}, + + {ORGAN, NOTE_C5S, 2}, + {ORGAN, NOTE_D5, 2}, + {ORGAN, NOTE_E5, 2}, + + {ORGAN, NOTE_C5S, 2}, + {ORGAN, NOTE_D5, 4}, + {ORGAN, NOTE_E5, 4}, + {ORGAN, NOTE_F5, 2}, + {ORGAN, NOTE_G5, 2}, + + {ORGAN, NOTE_E5, 2}, + {ORGAN, NOTE_F5, 2}, + {ORGAN, NOTE_G5, 2}, + + {ORGAN, NOTE_E5, 2}, + {ORGAN, NOTE_F5, 2}, + {ORGAN, NOTE_G5, 2}, + + {ORGAN, NOTE_E5, 2}, + {ORGAN, NOTE_F5, 4}, + {ORGAN, NOTE_G5, 4}, + {ORGAN, NOTE_A5, 2}, + {ORGAN, NOTE_A5S, 2}, + + {ORGAN, NOTE_G5, 2}, + {ORGAN, NOTE_A5, 2}, + {ORGAN, NOTE_A5S, 2}, + + {ORGAN, NOTE_G5, 2}, + {ORGAN, NOTE_A5, 2}, + {ORGAN, NOTE_A5S, 2}, + + {ORGAN, NOTE_G5, 2}, + {ORGAN, NOTE_A5, 4}, + {SILENCE, REST, 32}, + + {ORGAN, NOTE_A5, 4}, + {ORGAN, NOTE_G5, 2}, + {ORGAN, NOTE_A5S, 2}, + + {ORGAN, NOTE_E5, 2}, + {ORGAN, NOTE_G5, 2}, + {ORGAN, NOTE_A5S, 2}, + + {ORGAN, NOTE_E5, 2}, + {ORGAN, NOTE_F5, 2}, + {ORGAN, NOTE_A5, 2}, + + {ORGAN, NOTE_D5, 2}, + {ORGAN, NOTE_F5, 2}, + {ORGAN, NOTE_G5, 2}, + + {ORGAN, NOTE_D5, 2}, + {ORGAN, NOTE_E5, 2}, + {ORGAN, NOTE_A5, 2}, + + {ORGAN, NOTE_C5, 2}, + {ORGAN, NOTE_E5, 2}, + {ORGAN, NOTE_A5, 2}, + + {ORGAN, NOTE_C5, 2}, + {ORGAN, NOTE_D5, 2}, + {ORGAN, NOTE_F5, 2}, + + {ORGAN, NOTE_A4S, 2}, + {ORGAN, NOTE_D5, 2}, + {ORGAN, NOTE_E5, 2}, + + {ORGAN, NOTE_A4S, 2}, + {ORGAN, NOTE_C5, 2}, + {ORGAN, NOTE_E5, 2}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t js_bach_joy[] = { + {PIANO, NOTE_G3, 4}, + {PIANO, NOTE_A3, 4}, + {PIANO, NOTE_B3, 4}, + {PIANO, NOTE_D4, 3}, + {SILENCE, REST, 1}, + + {PIANO, NOTE_C4, 3}, + {SILENCE, REST, 1}, + {PIANO, NOTE_C4, 4}, + {PIANO, NOTE_E4, 3}, + {SILENCE, REST, 1}, + {PIANO, NOTE_D4, 2}, + {SILENCE, REST, 2}, + + {PIANO, NOTE_D4, 4}, + {PIANO, NOTE_G4 , 3}, + {SILENCE, REST, 1}, + {PIANO, NOTE_F4S, 4}, + {PIANO, NOTE_G4, 4}, + + {PIANO, NOTE_D4, 2}, + {SILENCE, REST, 2}, + {PIANO, NOTE_B3, 3}, + {SILENCE, REST, 1}, + {PIANO, NOTE_G3, 4}, + {PIANO, NOTE_A3, 2}, + {SILENCE, REST, 2}, + + {PIANO, NOTE_B3, 2}, + {SILENCE, REST, 2}, + {PIANO, NOTE_C4, 4}, + {PIANO, NOTE_D4, 2}, + {SILENCE, REST, 2}, + {PIANO, NOTE_E4, 2}, + {SILENCE, REST, 2}, + + {PIANO, NOTE_D4, 4}, + {PIANO, NOTE_C4, 2}, + {SILENCE, REST, 2}, + {PIANO, NOTE_B3, 2}, + {SILENCE, REST, 2}, + {PIANO, NOTE_A3, 4}, + + {PIANO, NOTE_B3, 2}, + {SILENCE, REST, 2}, + {PIANO, NOTE_G3, 2}, + {SILENCE, REST, 2}, + {PIANO, NOTE_G3, 8}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t big_band[] = { + {XYLOPHONE, NOTE_F4, 3}, + {XYLOPHONE, NOTE_G4, 3}, + {XYLOPHONE, NOTE_F4, 3}, + {XYLOPHONE, NOTE_D4, 3}, + {XYLOPHONE, NOTE_A3S, 3}, + {SILENCE, REST, 3}, + + {TRUMPET, NOTE_F4, 3}, + {TRUMPET, NOTE_G4, 3}, + {TRUMPET, NOTE_F4, 3}, + {TRUMPET, NOTE_D4, 3}, + {TRUMPET, NOTE_A3S, 3}, + {SILENCE, REST, 3}, + + {TUBA, NOTE_A2S, 6}, + {TUBA, NOTE_A2S, 6}, + {TUBA, NOTE_A2S, 4}, + {TUBA, NOTE_A2S, 6}, + {TUBA, NOTE_A2S, 6}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t beats[] = { + {SILENCE, REST, 8}, + {NOTCH, NOTE_C4, 8}, + {KICKDRUM, NOTE_C4, 8}, + {HIHAT, NOTE_C4, 8}, + {COWBELL, NOTE_C4, 8}, + {SILENCE, REST, 8}, + {NOTCH, NOTE_C4, 8}, + {KICKDRUM, NOTE_C4, 8}, + {HIHAT, NOTE_C4, 8}, + {COWBELL, NOTE_C4, 8}, + {SILENCE, REST, 8}, + {NOTCH, NOTE_C4, 8}, + {KICKDRUM, NOTE_C4, 8}, + {HIHAT, NOTE_C4, 8}, + {COWBELL, NOTE_C4, 8}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t beeping[] = { + {BEEPING, NOTE_C4, 64}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t alarm[] = { + {ALARM, NOTE_C4, 64}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t warble[] = { + {WARBLE, NOTE_C4, 64}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t carousel[] = { + {CAROUSEL, NOTE_C4, 64}, + {SILENCE, END_SONG, 0} + }; + + const PROGMEM SoundPlayer::sound_t all_instruments[] = { + {HARP}, + {XYLOPHONE}, + {TUBA}, + {GLOCKENSPIEL}, + {ORGAN}, + {TRUMPET}, + {PIANO}, + {CHIMES}, + {MUSIC_BOX}, + {BELL}, + {CLICK}, + {SWITCH}, + {COWBELL}, + {NOTCH}, + {HIHAT}, + {KICKDRUM}, + {SWITCH}, + {POP}, + {CLACK}, + {CHACK}, + {SILENCE, END_SONG, 0} + }; +}; // namespace Theme + +#define N_ELEMENTS(a) (sizeof(a)/sizeof(a[0])) + +const SoundList::list_t SoundList::list[] = { + {"Silence", FTDI::silence}, + {"Twinkle", Theme::twinkle}, + {"Chimes", Theme::chimes}, + {"Fanfare", Theme::fanfare}, + {"Sad Trombone", Theme::sad_trombone}, + {"Big Band", Theme::big_band}, + {"Beeping", Theme::beeping}, + {"Alarm", Theme::alarm}, + {"Warble", Theme::warble}, + {"Carousel", Theme::carousel}, + {"Beats", Theme::beats}, + {"Bach Joy", Theme::js_bach_joy}, + {"Bach Toccata", Theme::js_bach_toccata} +}; + +const uint8_t SoundList::n = N_ELEMENTS(SoundList::list); + +#endif // LULZBOT_TOUCH_UI diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.h new file mode 100644 index 000000000..c728d0012 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.h @@ -0,0 +1,43 @@ +/************ + * sounds.h * + ************/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +namespace Theme { + using namespace FTDI; + + extern const PROGMEM SoundPlayer::sound_t chimes[]; + extern const PROGMEM SoundPlayer::sound_t sad_trombone[]; + extern const PROGMEM SoundPlayer::sound_t twinkle[]; + extern const PROGMEM SoundPlayer::sound_t fanfare[]; + extern const PROGMEM SoundPlayer::sound_t media_inserted[]; + extern const PROGMEM SoundPlayer::sound_t media_removed[]; + extern const PROGMEM SoundPlayer::sound_t js_bach_toccata[]; + extern const PROGMEM SoundPlayer::sound_t js_bach_joy[]; + extern const PROGMEM SoundPlayer::sound_t big_band[]; + extern const PROGMEM SoundPlayer::sound_t beats[]; + extern const PROGMEM SoundPlayer::sound_t beeping[]; + extern const PROGMEM SoundPlayer::sound_t alarm[]; + extern const PROGMEM SoundPlayer::sound_t warble[]; + extern const PROGMEM SoundPlayer::sound_t carousel[]; + extern const PROGMEM SoundPlayer::sound_t all_instruments[]; +}; // namespace Theme diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/theme.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/theme.h new file mode 100644 index 000000000..6a73a0716 --- /dev/null +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/theme.h @@ -0,0 +1,28 @@ +/*********** + * theme.h * + ***********/ + +/**************************************************************************** + * Written By Mark Pelletier 2017 - Aleph Objects, Inc. * + * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, either version 3 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * To view a copy of the GNU General Public License, go to the following * + * location: . * + ****************************************************************************/ + +#pragma once + +#include "bitmaps.h" +#include "colors.h" +#include "fonts.h" +#include "sounds.h" diff --git a/Marlin/src/lcd/extensible_ui/ui_api.cpp b/Marlin/src/lcd/extensible_ui/ui_api.cpp index 014c8da5e..cd6d36a80 100644 --- a/Marlin/src/lcd/extensible_ui/ui_api.cpp +++ b/Marlin/src/lcd/extensible_ui/ui_api.cpp @@ -60,7 +60,7 @@ #include "../../libs/numtostr.h" #endif -#if DO_SWITCH_EXTRUDER || EITHER(SWITCHING_NOZZLE, PARKING_EXTRUDER) +#if EXTRUDERS > 1 #include "../../module/tool_change.h" #endif @@ -267,8 +267,12 @@ namespace ExtUI { return flags.manual_motion ? destination[axis] : current_position[axis]; } - float getAxisPosition_mm(const extruder_t) { - return flags.manual_motion ? destination[E_AXIS] : current_position[E_AXIS]; + float getAxisPosition_mm(const extruder_t extruder) { + const extruder_t old_tool = getActiveTool(); + setActiveTool(extruder, true); + const float pos = flags.manual_motion ? destination[E_AXIS] : current_position[E_AXIS]; + setActiveTool(old_tool, true); + return pos; } void setAxisPosition_mm(const float position, const axis_t axis) { @@ -315,6 +319,9 @@ namespace ExtUI { } #endif + constexpr float max_manual_feedrate[XYZE] = MANUAL_FEEDRATE; + setFeedrate_mm_s(max_manual_feedrate[axis]); + if (!flags.manual_motion) set_destination_from_current(); destination[axis] = clamp(position, min, max); flags.manual_motion = true; @@ -323,6 +330,8 @@ namespace ExtUI { void setAxisPosition_mm(const float position, const extruder_t extruder) { setActiveTool(extruder, true); + constexpr float max_manual_feedrate[XYZE] = MANUAL_FEEDRATE; + setFeedrate_mm_s(max_manual_feedrate[E_AXIS]); if (!flags.manual_motion) set_destination_from_current(); destination[E_AXIS] = position; flags.manual_motion = true; @@ -363,9 +372,7 @@ namespace ExtUI { void setActiveTool(const extruder_t extruder, bool no_move) { #if EXTRUDERS > 1 const uint8_t e = extruder - E0; - #if DO_SWITCH_EXTRUDER || EITHER(SWITCHING_NOZZLE, PARKING_EXTRUDER) - if (e != active_extruder) tool_change(e, no_move); - #endif + if (e != active_extruder) tool_change(e, no_move); active_extruder = e; #else UNUSED(extruder); @@ -792,7 +799,7 @@ namespace ExtUI { char* getTotalPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().totalPrints)); return buffer; } char* getFinishedPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().finishedPrints)); return buffer; } char* getTotalPrintTime_str(char buffer[21]) { duration_t(print_job_timer.getStats().printTime).toString(buffer); return buffer; } - char* getLongestPrint_str(char buffer[21]) { duration_t(print_job_timer.getStats().printTime).toString(buffer); return buffer; } + char* getLongestPrint_str(char buffer[21]) { duration_t(print_job_timer.getStats().longestPrint).toString(buffer); return buffer; } char* getFilamentUsed_str(char buffer[21]) { printStatistics stats = print_job_timer.getStats(); sprintf_P(buffer, PSTR("%ld.%im"), long(stats.filamentUsed / 1000), int16_t(stats.filamentUsed / 100) % 10); diff --git a/Marlin/src/lcd/extensible_ui/ui_api.h b/Marlin/src/lcd/extensible_ui/ui_api.h index 5cae33a28..8d2a98d17 100644 --- a/Marlin/src/lcd/extensible_ui/ui_api.h +++ b/Marlin/src/lcd/extensible_ui/ui_api.h @@ -66,6 +66,7 @@ namespace ExtUI { bool isMoving(); bool isAxisPositionKnown(const axis_t); + bool isAxisPositionKnown(const extruder_t); bool isPositionKnown(); // Axis position guaranteed, steppers active since homing bool isMachineHomed(); // Axis position most likely correct, steppers may have deactivated bool canMove(const axis_t); diff --git a/Marlin/src/lcd/extui_malyan_lcd.cpp b/Marlin/src/lcd/extui_malyan_lcd.cpp index 979e15959..d6fb84ac7 100644 --- a/Marlin/src/lcd/extui_malyan_lcd.cpp +++ b/Marlin/src/lcd/extui_malyan_lcd.cpp @@ -45,6 +45,8 @@ #if ENABLED(MALYAN_LCD) +#define DEBUG_MALYAN_LCD + #include "extensible_ui/ui_api.h" #include "ultralcd.h" @@ -62,6 +64,9 @@ #define LONG_FILENAME_LENGTH 0 #endif +#define DEBUG_OUT ENABLED(DEBUG_MALYAN_LCD) +#include "../core/debug_out.h" + // On the Malyan M200, this will be Serial1. On a RAMPS board, // it might not be. #define LCD_SERIAL Serial1 @@ -119,13 +124,13 @@ void process_lcd_c_command(const char* command) { LIMIT(feedrate_percentage, 10, 999); break; - case 'T': thermalManager.setTargetHotend(atoi(command + 1), 0); break; + case 'T': ExtUI::setTargetTemp_celsius(atoi(command + 1), ExtUI::extruder_t::E0); break; #if HAS_HEATED_BED - case 'P': thermalManager.setTargetBed(atoi(command + 1)); break; + case 'P': ExtUI::setTargetTemp_celsius(atoi(command + 1), ExtUI::heater_t::BED); break; #endif - default: SERIAL_ECHOLNPAIR("UNKNOWN C COMMAND", command); + default: DEBUG_ECHOLNPAIR("UNKNOWN C COMMAND ", command); } } @@ -163,9 +168,7 @@ void process_lcd_eb_command(const char* command) { write_to_lcd(message_buffer); } break; - default: - SERIAL_ECHOLNPAIR("UNKNOWN E/B COMMAND", command); - return; + default: DEBUG_ECHOLNPAIR("UNKNOWN E/B COMMAND ", command); } } @@ -180,32 +183,18 @@ void process_lcd_eb_command(const char* command) { * X, Y, Z, A (extruder) */ void process_lcd_j_command(const char* command) { - static bool steppers_enabled = false; - char axis = command[0]; - - switch (axis) { - case 'E': - // enable or disable steppers - // switch to relative - queue.enqueue_now_P(PSTR("G91")); - queue.enqueue_now_P(steppers_enabled ? PSTR("M18") : PSTR("M17")); - steppers_enabled = !steppers_enabled; - break; - case 'A': - axis = 'E'; - // fallthru - case 'Y': - case 'Z': - case 'X': { - // G0 - // The M200 class UI seems to send movement in .1mm values. - char cmd[20], pos[6]; - sprintf_P(cmd, PSTR("G1 %c%s"), axis, dtostrf(atof(command + 1) / 10.0, -5, 3, pos)); - queue.enqueue_one_now(cmd); - } break; - default: - SERIAL_ECHOLNPAIR("UNKNOWN J COMMAND", command); - return; + auto move_axis = [command](const auto axis) { + const float dist = atof(command + 1) / 10.0; + ExtUI::setAxisPosition_mm(ExtUI::getAxisPosition_mm(axis) + dist, axis); + } + + switch (command[0]) { + case 'E': break; + case 'A': move_axis(ExtUI::extruder_t::E0); break; + case 'Y': move_axis(ExtUI::axis_t::Y); break; + case 'Z': move_axis(ExtUI::axis_t::Z); break; + case 'X': move_axis(ExtUI::axis_t::X); break; + default: DEBUG_ECHOLNPAIR("UNKNOWN J COMMAND ", command); } } @@ -234,29 +223,20 @@ void process_lcd_j_command(const char* command) { void process_lcd_p_command(const char* command) { switch (command[0]) { + case 'P': + ExtUI::pausePrint(); + write_to_lcd_P(PSTR("{SYS:PAUSED}")); + break; + case 'R': + ExtUI::resumePrint(); + write_to_lcd_P(PSTR("{SYS:RESUMED}")); + break; case 'X': - #if ENABLED(SDSUPPORT) - // cancel print write_to_lcd_P(PSTR("{SYS:CANCELING}")); - last_printing_status = false; - card.stopSDPrint( - #if SD_RESORT - true - #endif - ); - queue.clear(); - quickstop_stepper(); - print_job_timer.stop(); - thermalManager.disable_all_heaters(); - thermalManager.zero_fan_speeds(); - wait_for_heatup = false; + ExtUI::stopPrint(); write_to_lcd_P(PSTR("{SYS:STARTED}")); - #endif - break; - case 'H': - // Home all axis - queue.enqueue_now_P(PSTR("G28")); - break; + break; + case 'H': queue.enqueue_now_P(PSTR("G28")); break; // Home all axes default: { #if ENABLED(SDSUPPORT) // Print file 000 - a three digit number indicating which @@ -338,9 +318,7 @@ void process_lcd_s_command(const char* command) { #endif } break; - default: - SERIAL_ECHOLNPAIR("UNKNOWN S COMMAND", command); - return; + default: DEBUG_ECHOLNPAIR("UNKNOWN S COMMAND ", command); } } @@ -354,34 +332,22 @@ void process_lcd_command(const char* command) { current++; // skip the leading {. The trailing one is already gone. byte command_code = *current++; - if (*current != ':') { - SERIAL_ECHOLNPAIR("UNKNOWN COMMAND FORMAT", command); - return; - } - - current++; // skip the : - - switch (command_code) { - case 'S': - process_lcd_s_command(current); - break; - case 'J': - process_lcd_j_command(current); - break; - case 'P': - process_lcd_p_command(current); - break; - case 'C': - process_lcd_c_command(current); - break; - case 'B': - case 'E': - process_lcd_eb_command(current); - break; - default: - SERIAL_ECHOLNPAIR("UNKNOWN COMMAND", command); - return; + if (*current == ':') { + + current++; // skip the : + + switch (command_code) { + case 'S': process_lcd_s_command(current); break; + case 'J': process_lcd_j_command(current); break; + case 'P': process_lcd_p_command(current); break; + case 'C': process_lcd_c_command(current); break; + case 'B': + case 'E': process_lcd_eb_command(current); break; + default: DEBUG_ECHOLNPAIR("UNKNOWN COMMAND ", command); + } } + else + DEBUG_ECHOLNPAIR("UNKNOWN COMMAND FORMAT ", command); } /** @@ -405,8 +371,7 @@ namespace ExtUI { /** * The Malyan LCD actually runs as a separate MCU on Serial 1. * This code's job is to siphon the weird curly-brace commands from - * it and translate into gcode, which then gets injected into - * the command queue where possible. + * it and translate into ExtUI operations where possible. */ inbound_count = 0; LCD_SERIAL.begin(500000); @@ -455,13 +420,13 @@ namespace ExtUI { // If there was a print in progress, we need to emit the final // print status as {TQ:100}. Reset last percent done so a new print will // issue a percent of 0. - const uint8_t percent_done = IS_SD_PRINTING() ? card.percentDone() : last_printing_status ? 100 : 0; + const uint8_t percent_done = (ExtUI::isPrinting() || ExtUI::isPrintingFromMediaPaused()) ? ExtUI::getProgress_percent() : last_printing_status ? 100 : 0; if (percent_done != last_percent_done) { char message_buffer[16]; sprintf_P(message_buffer, PSTR("{TQ:%03i}"), percent_done); write_to_lcd(message_buffer); last_percent_done = percent_done; - last_printing_status = IS_SD_PRINTING(); + last_printing_status = ExtUI::isPrinting(); } #endif } diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h index 3ae5d967c..2fd13d67e 100644 --- a/Marlin/src/lcd/language/language_an.h +++ b/Marlin/src/lcd/language/language_an.h @@ -33,8 +33,8 @@ #define NOT_EXTENDED_ISO10646_1_5X7 #define WELCOME_MSG MACHINE_NAME _UxGT(" parada.") -#define MSG_SD_INSERTED _UxGT("Tarcheta mesa") -#define MSG_SD_REMOVED _UxGT("Tarcheta sacada") +#define MSG_MEDIA_INSERTED _UxGT("Tarcheta mesa") +#define MSG_MEDIA_REMOVED _UxGT("Tarcheta sacada") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Menu prencipal") #define MSG_AUTOSTART _UxGT("Inicio automatico") @@ -146,8 +146,8 @@ #define MSG_PAUSE_PRINT _UxGT("Pausar impresion") #define MSG_RESUME_PRINT _UxGT("Contin. impresion") #define MSG_STOP_PRINT _UxGT("Detener Impresion") -#define MSG_CARD_MENU _UxGT("Menu de SD") -#define MSG_NO_CARD _UxGT("No i hai tarcheta") +#define MSG_MEDIA_MENU _UxGT("Menu de SD") +#define MSG_NO_MEDIA _UxGT("No i hai tarcheta") #define MSG_DWELL _UxGT("Reposo...") #define MSG_USERWAIT _UxGT("Aguardand ordines") #define MSG_PRINT_ABORTED _UxGT("Impres. cancelada") @@ -163,8 +163,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet F") #define MSG_AUTORETRACT _UxGT("Retraccion auto.") #define MSG_FILAMENTCHANGE _UxGT("Cambear filamento") -#define MSG_INIT_SDCARD _UxGT("Encetan. tarcheta") -#define MSG_CHANGE_SDCARD _UxGT("Cambiar tarcheta") +#define MSG_INIT_MEDIA _UxGT("Encetan. tarcheta") +#define MSG_CHANGE_MEDIA _UxGT("Cambiar tarcheta") #define MSG_ZPROBE_OUT _UxGT("Sonda Z fuera") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Auto-Test") #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h index 90afab43f..3e95058ba 100644 --- a/Marlin/src/lcd/language/language_bg.h +++ b/Marlin/src/lcd/language/language_bg.h @@ -32,8 +32,8 @@ #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" Готов.") -#define MSG_SD_INSERTED _UxGT("Картата е поставена") -#define MSG_SD_REMOVED _UxGT("Картата е извадена") +#define MSG_MEDIA_INSERTED _UxGT("Картата е поставена") +#define MSG_MEDIA_REMOVED _UxGT("Картата е извадена") #define MSG_MAIN _UxGT("Меню") #define MSG_AUTOSTART _UxGT("Автостарт") #define MSG_DISABLE_STEPPERS _UxGT("Изкл. двигатели") @@ -114,8 +114,8 @@ #define MSG_PAUSE_PRINT _UxGT("Пауза") #define MSG_RESUME_PRINT _UxGT("Възобнови печата") #define MSG_STOP_PRINT _UxGT("Спри печата") -#define MSG_CARD_MENU _UxGT("Меню карта") -#define MSG_NO_CARD _UxGT("Няма карта") +#define MSG_MEDIA_MENU _UxGT("Меню карта") +#define MSG_NO_MEDIA _UxGT("Няма карта") #define MSG_DWELL _UxGT("Почивка...") #define MSG_USERWAIT _UxGT("Изчакване") #define MSG_PRINT_ABORTED _UxGT("Печатът е прекъснат") @@ -131,8 +131,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Възврат V") #define MSG_AUTORETRACT _UxGT("Автоoткат") #define MSG_FILAMENTCHANGE _UxGT("Смяна нишка") -#define MSG_INIT_SDCARD _UxGT("Иниц. SD-Карта") -#define MSG_CHANGE_SDCARD _UxGT("Смяна SD-Карта") +#define MSG_INIT_MEDIA _UxGT("Иниц. SD-Карта") +#define MSG_CHANGE_MEDIA _UxGT("Смяна SD-Карта") #define MSG_ZPROBE_OUT _UxGT("Z-сондата е извадена") #define MSG_ZPROBE_ZOFFSET _UxGT("Z Отстояние") #define MSG_BABYSTEP_X _UxGT("Министъпка X") @@ -144,3 +144,4 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Калибровка Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Калибровка Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калибровка Център") +#define MSG_EXPECTED_PRINTER _UxGT("Неправилен принтер") diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h index 808566f58..3a81909cb 100644 --- a/Marlin/src/lcd/language/language_ca.h +++ b/Marlin/src/lcd/language/language_ca.h @@ -32,8 +32,8 @@ #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" preparada.") -#define MSG_SD_INSERTED _UxGT("Targeta detectada.") -#define MSG_SD_REMOVED _UxGT("Targeta extreta.") +#define MSG_MEDIA_INSERTED _UxGT("Targeta detectada.") +#define MSG_MEDIA_REMOVED _UxGT("Targeta extreta.") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") #define MSG_MAIN _UxGT("Menú principal") #define MSG_AUTOSTART _UxGT("Inici automatic") @@ -149,8 +149,8 @@ #define MSG_PAUSE_PRINT _UxGT("Pausa impressio") #define MSG_RESUME_PRINT _UxGT("Repren impressio") #define MSG_STOP_PRINT _UxGT("Atura impressio.") -#define MSG_CARD_MENU _UxGT("Imprimeix de SD") -#define MSG_NO_CARD _UxGT("No hi ha targeta") +#define MSG_MEDIA_MENU _UxGT("Imprimeix de SD") +#define MSG_NO_MEDIA _UxGT("No hi ha targeta") #define MSG_DWELL _UxGT("En repos...") #define MSG_USERWAIT _UxGT("Esperant usuari..") #define MSG_PRINT_ABORTED _UxGT("Imp. cancelada") @@ -166,8 +166,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet V") #define MSG_AUTORETRACT _UxGT("Auto retraccio") #define MSG_FILAMENTCHANGE _UxGT("Canvia filament") -#define MSG_INIT_SDCARD _UxGT("Inicialitza SD") -#define MSG_CHANGE_SDCARD _UxGT("Canvia SD") +#define MSG_INIT_MEDIA _UxGT("Inicialitza SD") +#define MSG_CHANGE_MEDIA _UxGT("Canvia SD") #define MSG_ZPROBE_OUT _UxGT("Sonda Z fora") #define MSG_BLTOUCH_RESET _UxGT("Reinicia BLTouch") #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST @@ -231,6 +231,8 @@ #define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Repren impressió") +#define MSG_EXPECTED_PRINTER _UxGT("Impressora incorrecta") + // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h index aead58bac..4aec9f9a1 100644 --- a/Marlin/src/lcd/language/language_cz.h +++ b/Marlin/src/lcd/language/language_cz.h @@ -42,8 +42,8 @@ #define MSG_YES _UxGT("ANO") #define MSG_NO _UxGT("NE") #define MSG_BACK _UxGT("Zpět") -#define MSG_SD_INSERTED _UxGT("Karta vložena") -#define MSG_SD_REMOVED _UxGT("Karta vyjmuta") +#define MSG_MEDIA_INSERTED _UxGT("Karta vložena") +#define MSG_MEDIA_REMOVED _UxGT("Karta vyjmuta") #define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znaku #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Endstopy") #define MSG_MAIN _UxGT("Hlavní nabídka") @@ -278,7 +278,7 @@ #define MSG_LOAD_EEPROM _UxGT("Načíst nastavení") #define MSG_RESTORE_FAILSAFE _UxGT("Obnovit výchozí") #define MSG_INIT_EEPROM _UxGT("Inic. EEPROM") -#define MSG_SD_UPDATE _UxGT("Aktualizace z SD") +#define MSG_MEDIA_UPDATE _UxGT("Aktualizace z SD") #define MSG_RESET_PRINTER _UxGT("Reset tiskárny") #define MSG_REFRESH _UxGT("Obnovit") #define MSG_WATCH _UxGT("Info obrazovka") @@ -291,8 +291,8 @@ #define MSG_RESUME_PRINT _UxGT("Obnovit tisk") #define MSG_STOP_PRINT _UxGT("Zastavit tisk") #define MSG_OUTAGE_RECOVERY _UxGT("Obnova výpadku") -#define MSG_CARD_MENU _UxGT("Tisknout z SD") -#define MSG_NO_CARD _UxGT("Žádná SD karta") +#define MSG_MEDIA_MENU _UxGT("Tisknout z SD") +#define MSG_NO_MEDIA _UxGT("Žádná SD karta") #define MSG_DWELL _UxGT("Uspáno...") #define MSG_USERWAIT _UxGT("Čekání na uživ...") #define MSG_PRINT_PAUSED _UxGT("Tisk pozastaven") @@ -321,8 +321,8 @@ #define MSG_FILAMENTUNLOAD _UxGT("Vysunout filament") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Vysunout vše") -#define MSG_INIT_SDCARD _UxGT("Načíst SD kartu") -#define MSG_CHANGE_SDCARD _UxGT("Vyměnit SD kartu") +#define MSG_INIT_MEDIA _UxGT("Načíst SD kartu") +#define MSG_CHANGE_MEDIA _UxGT("Vyměnit SD kartu") #define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl") #define MSG_SKEW_FACTOR _UxGT("Faktor zkosení") #define MSG_BLTOUCH _UxGT("BLTouch") @@ -495,6 +495,8 @@ #define MSG_SNAKE _UxGT("Sn4k3") #define MSG_MAZE _UxGT("Bludiště") +#define MSG_EXPECTED_PRINTER _UxGT("Nesprávná tiskárna") + #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Stikněte tlačítko") diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h index b65e5621d..6ecc4c6ea 100644 --- a/Marlin/src/lcd/language/language_da.h +++ b/Marlin/src/lcd/language/language_da.h @@ -33,8 +33,8 @@ #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" er klar") -#define MSG_SD_INSERTED _UxGT("Kort isat") -#define MSG_SD_REMOVED _UxGT("Kort fjernet") +#define MSG_MEDIA_INSERTED _UxGT("Kort isat") +#define MSG_MEDIA_REMOVED _UxGT("Kort fjernet") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Menu") #define MSG_AUTOSTART _UxGT("Autostart") @@ -146,8 +146,8 @@ #define MSG_PAUSE_PRINT _UxGT("Pause printet") #define MSG_RESUME_PRINT _UxGT("Forsæt printet") #define MSG_STOP_PRINT _UxGT("Stop printet") -#define MSG_CARD_MENU _UxGT("Print fra SD") -#define MSG_NO_CARD _UxGT("Intet SD kort") +#define MSG_MEDIA_MENU _UxGT("Print fra SD") +#define MSG_NO_MEDIA _UxGT("Intet SD kort") #define MSG_DWELL _UxGT("Dvale...") #define MSG_USERWAIT _UxGT("Venter på bruger...") #define MSG_PRINT_ABORTED _UxGT("Print annulleret") @@ -163,8 +163,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Skift filament") -#define MSG_INIT_SDCARD _UxGT("Init. SD card") -#define MSG_CHANGE_SDCARD _UxGT("Skift SD kort") +#define MSG_INIT_MEDIA _UxGT("Init. SD card") +#define MSG_CHANGE_MEDIA _UxGT("Skift SD kort") #define MSG_ZPROBE_OUT _UxGT("Probe udenfor plade") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Selv-Test") #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") @@ -229,6 +229,8 @@ #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Forsæt print") +#define MSG_EXPECTED_PRINTER _UxGT("Forkert printer") + #if LCD_HEIGHT >= 4 #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Vent på start") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("af filament") diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h index 6122383f5..b18e4c159 100644 --- a/Marlin/src/lcd/language/language_de.h +++ b/Marlin/src/lcd/language/language_de.h @@ -37,9 +37,9 @@ #define MSG_YES _UxGT("JA") #define MSG_NO _UxGT("NEIN") #define MSG_BACK _UxGT("Zurück") -#define MSG_SD_INSERTED _UxGT("SD-Karte erkannt") -#define MSG_SD_REMOVED _UxGT("SD-Karte entfernt") -#define MSG_SD_RELEASED _UxGT("SD-Karte freigeg.") +#define MSG_MEDIA_INSERTED _UxGT("SD-Karte erkannt") +#define MSG_MEDIA_REMOVED _UxGT("SD-Karte entfernt") +#define MSG_MEDIA_RELEASED _UxGT("SD-Karte freigeg.") #define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Software-Endstopp") #define MSG_MAIN _UxGT("Hauptmenü") @@ -276,7 +276,7 @@ #define MSG_LOAD_EEPROM _UxGT("Konfig. laden") #define MSG_RESTORE_FAILSAFE _UxGT("Standardwerte laden") #define MSG_INIT_EEPROM _UxGT("Werkseinstellungen") -#define MSG_SD_UPDATE _UxGT("SD-Firmware-Update") +#define MSG_MEDIA_UPDATE _UxGT("SD-Firmware-Update") #define MSG_RESET_PRINTER _UxGT("Drucker neustarten") #define MSG_REFRESH _UxGT("Aktualisieren") #define MSG_WATCH _UxGT("Info") @@ -294,8 +294,8 @@ #define MSG_RESUME_PRINT _UxGT("SD-Druck fortsetzen") #define MSG_STOP_PRINT _UxGT("SD-Druck abbrechen") #define MSG_OUTAGE_RECOVERY _UxGT("Wiederh. n. Stroma.") -#define MSG_CARD_MENU _UxGT("Druck v. SD-Karte") -#define MSG_NO_CARD _UxGT("Keine SD-Karte") +#define MSG_MEDIA_MENU _UxGT("Druck v. SD-Karte") +#define MSG_NO_MEDIA _UxGT("Keine SD-Karte") #define MSG_DWELL _UxGT("Warten...") #define MSG_USERWAIT _UxGT("Klick zum Fortsetzen") #define MSG_PRINT_PAUSED _UxGT("Druck pausiert...") @@ -323,9 +323,9 @@ #define MSG_FILAMENTLOAD _UxGT("Filament laden") #define MSG_FILAMENTUNLOAD _UxGT("Filament entladen") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Alles entladen") -#define MSG_INIT_SDCARD _UxGT("SD-Karte initial.") // Manually initialize the SD-card via user interface -#define MSG_CHANGE_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21" -#define MSG_RELEASE_SDCARD _UxGT("SD-Karte freigeben") // if Marlin gets confused - M22 +#define MSG_INIT_MEDIA _UxGT("SD-Karte initial.") // Manually initialize the SD-card via user interface +#define MSG_CHANGE_MEDIA _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21" +#define MSG_RELEASE_MEDIA _UxGT("SD-Karte freigeben") // if Marlin gets confused - M22 #define MSG_ZPROBE_OUT _UxGT("Z-Sonde außerhalb") #define MSG_SKEW_FACTOR _UxGT("Korrekturfaktor") #define MSG_BLTOUCH _UxGT("BLTouch") @@ -409,6 +409,8 @@ #define MSG_CASE_LIGHT _UxGT("Beleuchtung") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Helligkeit") +#define MSG_EXPECTED_PRINTER _UxGT("Falscher Drucker") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplette Drucke") diff --git a/Marlin/src/lcd/language/language_el-gr.h b/Marlin/src/lcd/language/language_el-gr.h index ea66d3ff0..5f7a1d2d3 100644 --- a/Marlin/src/lcd/language/language_el-gr.h +++ b/Marlin/src/lcd/language/language_el-gr.h @@ -33,8 +33,8 @@ #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" έτοιμο.") -#define MSG_SD_INSERTED _UxGT("Εισαγωγή κάρτας") -#define MSG_SD_REMOVED _UxGT("Αφαίρεση κάρτας") +#define MSG_MEDIA_INSERTED _UxGT("Εισαγωγή κάρτας") +#define MSG_MEDIA_REMOVED _UxGT("Αφαίρεση κάρτας") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Βασική Οθόνη") #define MSG_AUTOSTART _UxGT("Αυτόματη εκκίνηση") @@ -144,8 +144,8 @@ #define MSG_PAUSE_PRINT _UxGT("Παύση εκτύπωσης") #define MSG_RESUME_PRINT _UxGT("Συνέχιση εκτύπωσης") #define MSG_STOP_PRINT _UxGT("Διακοπή εκτύπωσης") -#define MSG_CARD_MENU _UxGT("Εκτύπωση από SD") -#define MSG_NO_CARD _UxGT("Δεν βρέθηκε SD") +#define MSG_MEDIA_MENU _UxGT("Εκτύπωση από SD") +#define MSG_NO_MEDIA _UxGT("Δεν βρέθηκε SD") #define MSG_DWELL _UxGT("Αναστολή λειτουργίας…") #define MSG_USERWAIT _UxGT("Αναμονή για χρήστη…") #define MSG_PRINT_ABORTED _UxGT("Διακόπτεται η εκτύπωση") @@ -161,8 +161,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_AUTORETRACT _UxGT("Αυτόματη ανάσυρση") #define MSG_FILAMENTCHANGE _UxGT("Αλλαγή νήματος") -#define MSG_INIT_SDCARD _UxGT("Προετοιμασία κάρτας SD") -#define MSG_CHANGE_SDCARD _UxGT("Αλλαγή κάρτας SD") +#define MSG_INIT_MEDIA _UxGT("Προετοιμασία κάρτας SD") +#define MSG_CHANGE_MEDIA _UxGT("Αλλαγή κάρτας SD") #define MSG_ZPROBE_OUT _UxGT("Διερεύνηση Z εκτός κλίνης") #define MSG_YX_UNHOMED _UxGT("Επαναφορά Χ/Υ πριν από Ζ") #define MSG_XYZ_UNHOMED _UxGT("Επαναφορά ΧΥΖ πρώτα") @@ -185,3 +185,5 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Βαθμονόμηση Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Βαθμονόμηση Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Βαθμονόμηση κέντρου") + +#define MSG_EXPECTED_PRINTER _UxGT("Εσφαλμένος εκτυπωτής") diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h index 2425309f7..37eb4fbe7 100644 --- a/Marlin/src/lcd/language/language_el.h +++ b/Marlin/src/lcd/language/language_el.h @@ -33,8 +33,8 @@ #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" έτοιμο.") -#define MSG_SD_INSERTED _UxGT("Εισαγωγή κάρτας") -#define MSG_SD_REMOVED _UxGT("Αφαίρεση κάρτας") +#define MSG_MEDIA_INSERTED _UxGT("Εισαγωγή κάρτας") +#define MSG_MEDIA_REMOVED _UxGT("Αφαίρεση κάρτας") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Βασική Οθόνη") #define MSG_AUTOSTART _UxGT("Αυτόματη εκκίνηση") @@ -144,8 +144,8 @@ #define MSG_PAUSE_PRINT _UxGT("Παύση εκτύπωσης") #define MSG_RESUME_PRINT _UxGT("Συνέχιση εκτύπωσης") #define MSG_STOP_PRINT _UxGT("Διακοπή εκτύπωσης") -#define MSG_CARD_MENU _UxGT("Εκτύπωση από SD") -#define MSG_NO_CARD _UxGT("Δεν βρέθηκε SD") +#define MSG_MEDIA_MENU _UxGT("Εκτύπωση από SD") +#define MSG_NO_MEDIA _UxGT("Δεν βρέθηκε SD") #define MSG_DWELL _UxGT("Αναστολή λειτουργίας") #define MSG_USERWAIT _UxGT("Αναμονή για χρήστη") #define MSG_PRINT_ABORTED _UxGT("Διακόπτεται η εκτύπωση") //SHORTEN @@ -161,8 +161,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_AUTORETRACT _UxGT("Αυτόματη ανάσυρση") #define MSG_FILAMENTCHANGE _UxGT("Αλλαγή νήματος") -#define MSG_INIT_SDCARD _UxGT("Προετοιμασία κάρτας SD") //SHORTEN -#define MSG_CHANGE_SDCARD _UxGT("Αλλαγή κάρτας SD") +#define MSG_INIT_MEDIA _UxGT("Προετοιμασία κάρτας SD") //SHORTEN +#define MSG_CHANGE_MEDIA _UxGT("Αλλαγή κάρτας SD") #define MSG_ZPROBE_OUT _UxGT("Διερεύνηση Z εκτός Επ.Εκτύπωσης") //SHORTEN #define MSG_YX_UNHOMED _UxGT("Επαναφορά Χ/Υ πριν από Ζ") //SHORTEN #define MSG_XYZ_UNHOMED _UxGT("Επαναφορά ΧΥΖ πρώτα") @@ -186,3 +186,5 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Βαθμονόμηση Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Βαθμονόμηση Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Βαθμονόμηση κέντρου") + +#define MSG_EXPECTED_PRINTER _UxGT("Εσφαλμένος εκτυπωτής") diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 0d1cd4f8d..fc9b9c33d 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -61,14 +61,14 @@ #ifndef MSG_BACK #define MSG_BACK _UxGT("Back") #endif -#ifndef MSG_SD_INSERTED - #define MSG_SD_INSERTED _UxGT("Card Inserted") +#ifndef MSG_MEDIA_INSERTED + #define MSG_MEDIA_INSERTED _UxGT("Media Inserted") #endif -#ifndef MSG_SD_REMOVED - #define MSG_SD_REMOVED _UxGT("Card Removed") +#ifndef MSG_MEDIA_REMOVED + #define MSG_MEDIA_REMOVED _UxGT("Media Removed") #endif -#ifndef MSG_SD_RELEASED - #define MSG_SD_RELEASED _UxGT("Card Released") +#ifndef MSG_MEDIA_RELEASED + #define MSG_MEDIA_RELEASED _UxGT("Media Released") #endif #ifndef MSG_LCD_ENDSTOPS #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters @@ -765,8 +765,8 @@ #ifndef MSG_INIT_EEPROM #define MSG_INIT_EEPROM _UxGT("Initialize EEPROM") #endif -#ifndef MSG_SD_UPDATE - #define MSG_SD_UPDATE _UxGT("SD Update") +#ifndef MSG_MEDIA_UPDATE + #define MSG_MEDIA_UPDATE _UxGT("Media Update") #endif #ifndef MSG_RESET_PRINTER #define MSG_RESET_PRINTER _UxGT("Reset Printer") @@ -819,11 +819,11 @@ #ifndef MSG_OUTAGE_RECOVERY #define MSG_OUTAGE_RECOVERY _UxGT("Outage Recovery") #endif -#ifndef MSG_CARD_MENU - #define MSG_CARD_MENU _UxGT("Print from SD") +#ifndef MSG_MEDIA_MENU + #define MSG_MEDIA_MENU _UxGT("Print from Media") #endif -#ifndef MSG_NO_CARD - #define MSG_NO_CARD _UxGT("No SD Card") +#ifndef MSG_NO_MEDIA + #define MSG_NO_MEDIA _UxGT("No Media") #endif #ifndef MSG_DWELL #define MSG_DWELL _UxGT("Sleep...") @@ -909,14 +909,14 @@ #ifndef MSG_FILAMENTUNLOAD_ALL #define MSG_FILAMENTUNLOAD_ALL _UxGT("Unload All") #endif -#ifndef MSG_INIT_SDCARD - #define MSG_INIT_SDCARD _UxGT("Init. SD Card") +#ifndef MSG_INIT_MEDIA + #define MSG_INIT_MEDIA _UxGT("Init. Media") #endif -#ifndef MSG_CHANGE_SDCARD - #define MSG_CHANGE_SDCARD _UxGT("Change SD Card") +#ifndef MSG_CHANGE_MEDIA + #define MSG_CHANGE_MEDIA _UxGT("Change Media") #endif -#ifndef MSG_RELEASE_SDCARD - #define MSG_RELEASE_SDCARD _UxGT("Release SD Card") +#ifndef MSG_RELEASE_MEDIA + #define MSG_RELEASE_MEDIA _UxGT("Release Media") #endif #ifndef MSG_ZPROBE_OUT #define MSG_ZPROBE_OUT _UxGT("Z Probe Past Bed") @@ -1164,6 +1164,11 @@ #ifndef MSG_CASE_LIGHT_BRIGHTNESS #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Light Brightness") #endif + +#ifndef MSG_EXPECTED_PRINTER + #define MSG_EXPECTED_PRINTER _UxGT("INCORRECT PRINTER") +#endif + #if LCD_WIDTH >= 20 #ifndef MSG_INFO_PRINT_COUNT #define MSG_INFO_PRINT_COUNT _UxGT("Print Count") diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h index 2d4f1ac2b..be4c1e320 100644 --- a/Marlin/src/lcd/language/language_es.h +++ b/Marlin/src/lcd/language/language_es.h @@ -34,8 +34,8 @@ #define WELCOME_MSG MACHINE_NAME _UxGT(" lista.") #define MSG_BACK _UxGT("Atrás") -#define MSG_SD_INSERTED _UxGT("Tarjeta colocada") -#define MSG_SD_REMOVED _UxGT("Tarjeta retirada") +#define MSG_MEDIA_INSERTED _UxGT("Tarjeta colocada") +#define MSG_MEDIA_REMOVED _UxGT("Tarjeta retirada") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Menú principal") #define MSG_AUTOSTART _UxGT("Inicio automático") @@ -143,8 +143,8 @@ #define MSG_PAUSE_PRINT _UxGT("Pausar impresión") #define MSG_RESUME_PRINT _UxGT("Reanudar impresión") #define MSG_STOP_PRINT _UxGT("Detener impresión") -#define MSG_CARD_MENU _UxGT("Menú de SD") -#define MSG_NO_CARD _UxGT("No hay tarjeta SD") +#define MSG_MEDIA_MENU _UxGT("Menú de SD") +#define MSG_NO_MEDIA _UxGT("No hay tarjeta SD") #define MSG_DWELL _UxGT("Reposo...") #define MSG_USERWAIT _UxGT("Esperando órdenes") #define MSG_PRINT_ABORTED _UxGT("Impresión cancelada") @@ -160,8 +160,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet V") #define MSG_AUTORETRACT _UxGT("Retracción Auto.") #define MSG_FILAMENTCHANGE _UxGT("Cambiar filamento") -#define MSG_INIT_SDCARD _UxGT("Iniciando tarjeta") -#define MSG_CHANGE_SDCARD _UxGT("Cambiar tarjeta") +#define MSG_INIT_MEDIA _UxGT("Iniciando tarjeta") +#define MSG_CHANGE_MEDIA _UxGT("Cambiar tarjeta") #define MSG_ZPROBE_OUT _UxGT("Sonda Z fuera") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Auto-Prueba") #define MSG_BLTOUCH_RESET _UxGT("Reiniciar BLTouch") @@ -204,6 +204,8 @@ #define MSG_INFO_PROTOCOL _UxGT("Protocolo") #define MSG_CASE_LIGHT _UxGT("Luz cabina") +#define MSG_EXPECTED_PRINTER _UxGT("Impresora incorrecta") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresión") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas") diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h index 3d487450e..12767d536 100644 --- a/Marlin/src/lcd/language/language_eu.h +++ b/Marlin/src/lcd/language/language_eu.h @@ -34,8 +34,8 @@ #define WELCOME_MSG MACHINE_NAME _UxGT(" prest.") #define MSG_BACK _UxGT("Atzera") -#define MSG_SD_INSERTED _UxGT("Txartela sartuta") -#define MSG_SD_REMOVED _UxGT("Txartela kenduta") +#define MSG_MEDIA_INSERTED _UxGT("Txartela sartuta") +#define MSG_MEDIA_REMOVED _UxGT("Txartela kenduta") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Menu nagusia") #define MSG_AUTOSTART _UxGT("Auto hasiera") @@ -246,8 +246,8 @@ #define MSG_PAUSE_PRINT _UxGT("Pausatu inprimak.") #define MSG_RESUME_PRINT _UxGT("Jarraitu inprima.") #define MSG_STOP_PRINT _UxGT("Gelditu inprima.") -#define MSG_CARD_MENU _UxGT("SD-tik inprimatu") -#define MSG_NO_CARD _UxGT("Ez dago SD-rik") +#define MSG_MEDIA_MENU _UxGT("SD-tik inprimatu") +#define MSG_NO_MEDIA _UxGT("Ez dago SD-rik") #define MSG_DWELL _UxGT("Lo egin...") #define MSG_USERWAIT _UxGT("Aginduak zain...") #define MSG_PRINT_PAUSED _UxGT("Inprim. geldi.") @@ -268,8 +268,8 @@ #define MSG_FILAMENTLOAD _UxGT("Harizpia kargatu") #define MSG_FILAMENTUNLOAD _UxGT("Harizpia deskargatu") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Erabat deskargatu") -#define MSG_INIT_SDCARD _UxGT("Hasieratu SD-a") -#define MSG_CHANGE_SDCARD _UxGT("Aldatu txartela") +#define MSG_INIT_MEDIA _UxGT("Hasieratu SD-a") +#define MSG_CHANGE_MEDIA _UxGT("Aldatu txartela") #define MSG_ZPROBE_OUT _UxGT("Z zunda kanpora") #define MSG_SKEW_FACTOR _UxGT("Okertze faktorea") #define MSG_BLTOUCH _UxGT("BLTouch") @@ -354,6 +354,9 @@ #define MSG_ERR_HOMING_FAILED _UxGT("Hasi. huts egin du") #define MSG_ERR_PROBING_FAILED _UxGT("Neurketak huts egin du") #define MSG_M600_TOO_COLD _UxGT("M600: hotzegi") + +#define MSG_EXPECTED_PRINTER _UxGT("Inprimagailu okerra") + // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h index 185cc8ac1..4d02e0ac3 100644 --- a/Marlin/src/lcd/language/language_fi.h +++ b/Marlin/src/lcd/language/language_fi.h @@ -33,8 +33,8 @@ #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" valmis.") -#define MSG_SD_INSERTED _UxGT("Kortti asetettu") -#define MSG_SD_REMOVED _UxGT("Kortti poistettu") +#define MSG_MEDIA_INSERTED _UxGT("Kortti asetettu") +#define MSG_MEDIA_REMOVED _UxGT("Kortti poistettu") #define MSG_MAIN _UxGT("Palaa") #define MSG_AUTOSTART _UxGT("Automaatti") #define MSG_DISABLE_STEPPERS _UxGT("Vapauta moottorit") @@ -136,8 +136,8 @@ #define MSG_PAUSE_PRINT _UxGT("Keskeytä tulostus") #define MSG_RESUME_PRINT _UxGT("Jatka tulostusta") #define MSG_STOP_PRINT _UxGT("Pysäytä tulostus") -#define MSG_CARD_MENU _UxGT("Korttivalikko") -#define MSG_NO_CARD _UxGT("Ei korttia") +#define MSG_MEDIA_MENU _UxGT("Korttivalikko") +#define MSG_NO_MEDIA _UxGT("Ei korttia") #define MSG_DWELL _UxGT("Nukkumassa...") #define MSG_USERWAIT _UxGT("Odotet. valintaa") #define MSG_PRINT_ABORTED _UxGT("Print aborted") @@ -153,8 +153,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_AUTORETRACT _UxGT("AutoVeto.") #define MSG_FILAMENTCHANGE _UxGT("Change filament") -#define MSG_INIT_SDCARD _UxGT("Init. SD-Card") -#define MSG_CHANGE_SDCARD _UxGT("Change SD-Card") +#define MSG_INIT_MEDIA _UxGT("Init. SD-Card") +#define MSG_CHANGE_MEDIA _UxGT("Change SD-Card") #define MSG_ZPROBE_OUT _UxGT("Z probe out. bed") #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("first") @@ -168,3 +168,5 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibroi Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibroi Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibroi Center") + +#define MSG_EXPECTED_PRINTER _UxGT("Väärä tulostin") diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 947ea5ac2..908b2e459 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -36,9 +36,9 @@ #define MSG_YES _UxGT("Oui") #define MSG_NO _UxGT("Non") #define MSG_BACK _UxGT("Retour") -#define MSG_SD_INSERTED _UxGT("Carte insérée") -#define MSG_SD_REMOVED _UxGT("Carte retirée") -#define MSG_SD_RELEASED _UxGT("Carte libérée") +#define MSG_MEDIA_INSERTED _UxGT("Carte insérée") +#define MSG_MEDIA_REMOVED _UxGT("Carte retirée") +#define MSG_MEDIA_RELEASED _UxGT("Carte libérée") #define MSG_LCD_ENDSTOPS _UxGT("Butées") #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Butées SW") #define MSG_MAIN _UxGT("Menu principal") @@ -273,7 +273,7 @@ #define MSG_LOAD_EEPROM _UxGT("Charger config.") #define MSG_RESTORE_FAILSAFE _UxGT("Restaurer défauts") #define MSG_INIT_EEPROM _UxGT("Initialiser EEPROM") -#define MSG_SD_UPDATE _UxGT("MaJ Firmware SD") +#define MSG_MEDIA_UPDATE _UxGT("MaJ Firmware SD") #define MSG_RESET_PRINTER _UxGT("RaZ imprimante") #define MSG_REFRESH _UxGT("Actualiser") #define MSG_WATCH _UxGT("Surveiller") @@ -291,8 +291,8 @@ #define MSG_RESUME_PRINT _UxGT("Reprendre impr.") #define MSG_STOP_PRINT _UxGT("Arrêter impr.") #define MSG_OUTAGE_RECOVERY _UxGT("Récupér. coupure") -#define MSG_CARD_MENU _UxGT("Impression SD") -#define MSG_NO_CARD _UxGT("Pas de carte") +#define MSG_MEDIA_MENU _UxGT("Impression SD") +#define MSG_NO_MEDIA _UxGT("Pas de carte") #define MSG_DWELL _UxGT("Repos...") #define MSG_USERWAIT _UxGT("Attente utilis.") #define MSG_PRINT_PAUSED _UxGT("Impr. en pause") @@ -321,9 +321,9 @@ #define MSG_FILAMENTLOAD _UxGT("Charger filament") #define MSG_FILAMENTUNLOAD _UxGT("Retrait filament") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Décharger tout") -#define MSG_INIT_SDCARD _UxGT("Init. la carte SD") -#define MSG_CHANGE_SDCARD _UxGT("Actualiser carte SD") -#define MSG_RELEASE_SDCARD _UxGT("Retirer carte SD") +#define MSG_INIT_MEDIA _UxGT("Init. la carte SD") +#define MSG_CHANGE_MEDIA _UxGT("Actualiser carte SD") +#define MSG_RELEASE_MEDIA _UxGT("Retirer carte SD") #define MSG_ZPROBE_OUT _UxGT("Sonde Z hors lit") #define MSG_SKEW_FACTOR _UxGT("Facteur écart") #define MSG_BLTOUCH _UxGT("BLTouch") @@ -409,6 +409,8 @@ #define MSG_CASE_LIGHT _UxGT("Lumière caisson") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosité") +#define MSG_EXPECTED_PRINTER _UxGT("Imprimante incorrecte") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminées") diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h index 701275a1e..d3a87296b 100644 --- a/Marlin/src/lcd/language/language_gl.h +++ b/Marlin/src/lcd/language/language_gl.h @@ -33,8 +33,8 @@ #define NOT_EXTENDED_ISO10646_1_5X7 #define WELCOME_MSG MACHINE_NAME _UxGT(" lista.") -#define MSG_SD_INSERTED _UxGT("Tarxeta inserida") -#define MSG_SD_REMOVED _UxGT("Tarxeta retirada") +#define MSG_MEDIA_INSERTED _UxGT("Tarxeta inserida") +#define MSG_MEDIA_REMOVED _UxGT("Tarxeta retirada") #define MSG_LCD_ENDSTOPS _UxGT("FinCarro") #define MSG_MAIN _UxGT("Menu principal") #define MSG_AUTOSTART _UxGT("Autoarranque") @@ -145,8 +145,8 @@ #define MSG_PAUSE_PRINT _UxGT("Pausar impres.") #define MSG_RESUME_PRINT _UxGT("Seguir impres.") #define MSG_STOP_PRINT _UxGT("Deter impres.") -#define MSG_CARD_MENU _UxGT("Tarxeta SD") -#define MSG_NO_CARD _UxGT("Sen tarxeta SD") +#define MSG_MEDIA_MENU _UxGT("Tarxeta SD") +#define MSG_NO_MEDIA _UxGT("Sen tarxeta SD") #define MSG_DWELL _UxGT("En repouso...") #define MSG_USERWAIT _UxGT("A espera...") #define MSG_PRINT_ABORTED _UxGT("Impre. cancelada") @@ -162,8 +162,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Recuperacion V") #define MSG_AUTORETRACT _UxGT("Retraccion auto.") #define MSG_FILAMENTCHANGE _UxGT("Cambiar filamen.") -#define MSG_INIT_SDCARD _UxGT("Iniciando SD") -#define MSG_CHANGE_SDCARD _UxGT("Cambiar SD") +#define MSG_INIT_MEDIA _UxGT("Iniciando SD") +#define MSG_CHANGE_MEDIA _UxGT("Cambiar SD") #define MSG_ZPROBE_OUT _UxGT("Sonda-Z sen cama") #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_BLTOUCH_SELFTEST _UxGT("Comprobar BLTouch") @@ -225,6 +225,8 @@ #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Segue traballo") +#define MSG_EXPECTED_PRINTER _UxGT("Impresora incorrecta") + #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Agarde para") diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h index 2662e2a27..f60e91654 100644 --- a/Marlin/src/lcd/language/language_hr.h +++ b/Marlin/src/lcd/language/language_hr.h @@ -33,8 +33,8 @@ #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" spreman.") -#define MSG_SD_INSERTED _UxGT("SD kartica umetnuta") -#define MSG_SD_REMOVED _UxGT("SD kartica uklonjena") +#define MSG_MEDIA_INSERTED _UxGT("SD kartica umetnuta") +#define MSG_MEDIA_REMOVED _UxGT("SD kartica uklonjena") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Main") #define MSG_AUTOSTART _UxGT("Auto pokretanje") @@ -145,8 +145,8 @@ #define MSG_PAUSE_PRINT _UxGT("Pauziraj print") #define MSG_RESUME_PRINT _UxGT("Nastavi print") #define MSG_STOP_PRINT _UxGT("Zaustavi print") -#define MSG_CARD_MENU _UxGT("Printaj s SD kartice") -#define MSG_NO_CARD _UxGT("Nema SD kartice") +#define MSG_MEDIA_MENU _UxGT("Printaj s SD kartice") +#define MSG_NO_MEDIA _UxGT("Nema SD kartice") #define MSG_DWELL _UxGT("Sleep...") #define MSG_USERWAIT _UxGT("Čekaj korisnika...") #define MSG_PRINT_ABORTED _UxGT("Print otkazan") @@ -162,8 +162,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Promijeni filament") -#define MSG_INIT_SDCARD _UxGT("Init. SD karticu") -#define MSG_CHANGE_SDCARD _UxGT("Promijeni SD karticu") +#define MSG_INIT_MEDIA _UxGT("Init. SD karticu") +#define MSG_CHANGE_MEDIA _UxGT("Promijeni SD karticu") #define MSG_ZPROBE_OUT _UxGT("Z probe out. bed") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") @@ -204,6 +204,8 @@ #define MSG_INFO_PROTOCOL _UxGT("Protokol") #define MSG_CASE_LIGHT _UxGT("Osvjetljenje") +#define MSG_EXPECTED_PRINTER _UxGT("Neispravan pisač") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Broj printova") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Završeni") diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h index 4cc8f0d98..38a80d3c6 100644 --- a/Marlin/src/lcd/language/language_it.h +++ b/Marlin/src/lcd/language/language_it.h @@ -35,9 +35,9 @@ #define MSG_YES _UxGT("SI") #define MSG_NO _UxGT("NO") #define MSG_BACK _UxGT("Indietro") -#define MSG_SD_INSERTED _UxGT("SD Card inserita") -#define MSG_SD_REMOVED _UxGT("SD Card rimossa") -#define MSG_SD_RELEASED _UxGT("SD Card rilasciata") +#define MSG_MEDIA_INSERTED _UxGT("SD Card inserita") +#define MSG_MEDIA_REMOVED _UxGT("SD Card rimossa") +#define MSG_MEDIA_RELEASED _UxGT("SD Card rilasciata") #define MSG_LCD_ENDSTOPS _UxGT("Finecor.") // Max 8 caratteri #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Finecorsa Soft") #define MSG_MAIN _UxGT("Menu principale") @@ -274,7 +274,7 @@ #define MSG_LOAD_EEPROM _UxGT("Carica impostazioni") #define MSG_RESTORE_FAILSAFE _UxGT("Ripristina imp.") #define MSG_INIT_EEPROM _UxGT("Inizializza EEPROM") -#define MSG_SD_UPDATE _UxGT("Aggiorna SD") +#define MSG_MEDIA_UPDATE _UxGT("Aggiorna SD") #define MSG_RESET_PRINTER _UxGT("Resetta stampante") #define MSG_REFRESH _UxGT("Aggiorna") #define MSG_WATCH _UxGT("Schermata info") @@ -292,8 +292,8 @@ #define MSG_RESUME_PRINT _UxGT("Riprendi stampa") #define MSG_STOP_PRINT _UxGT("Arresta stampa") #define MSG_OUTAGE_RECOVERY _UxGT("Ripresa da PowerLoss") -#define MSG_CARD_MENU _UxGT("Stampa da SD") -#define MSG_NO_CARD _UxGT("SD non presente") +#define MSG_MEDIA_MENU _UxGT("Stampa da SD") +#define MSG_NO_MEDIA _UxGT("SD non presente") #define MSG_DWELL _UxGT("Sospensione...") #define MSG_USERWAIT _UxGT("Premi tasto..") #define MSG_PRINT_PAUSED _UxGT("Stampa sospesa") @@ -322,9 +322,9 @@ #define MSG_FILAMENTLOAD _UxGT("Carica filamento") #define MSG_FILAMENTUNLOAD _UxGT("Rimuovi filamento") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Rimuovi tutto") -#define MSG_INIT_SDCARD _UxGT("Iniz. SD card") -#define MSG_CHANGE_SDCARD _UxGT("Cambia SD card") -#define MSG_RELEASE_SDCARD _UxGT("Rilascia SD card") +#define MSG_INIT_MEDIA _UxGT("Iniz. SD card") +#define MSG_CHANGE_MEDIA _UxGT("Cambia SD card") +#define MSG_RELEASE_MEDIA _UxGT("Rilascia SD card") #define MSG_ZPROBE_OUT _UxGT("Z probe fuori piatto") #define MSG_SKEW_FACTOR _UxGT("Fattore distorsione") #define MSG_BLTOUCH _UxGT("BLTouch") @@ -494,6 +494,8 @@ #define MSG_SNAKE _UxGT("Sn4k3") #define MSG_MAZE _UxGT("Maze") +#define MSG_EXPECTED_PRINTER _UxGT("Stampante errata") + // // Le schermate di Cambio Filamento possono visualizzare fino a 3 linee su un display a 4 righe // ...o fino a 2 linee su un display a 3 righe. diff --git a/Marlin/src/lcd/language/language_jp-kana.h b/Marlin/src/lcd/language/language_jp-kana.h index e1a6b2060..4792bb1dd 100644 --- a/Marlin/src/lcd/language/language_jp-kana.h +++ b/Marlin/src/lcd/language/language_jp-kana.h @@ -38,8 +38,8 @@ // 片仮名表示定義 #define WELCOME_MSG MACHINE_NAME _UxGT(" ready.") -#define MSG_SD_INSERTED _UxGT("カードガソウニュウサレマシタ") // "Card inserted" -#define MSG_SD_REMOVED _UxGT("カードガアリマセン") // "Card removed" +#define MSG_MEDIA_INSERTED _UxGT("カードガソウニュウサレマシタ") // "Card inserted" +#define MSG_MEDIA_REMOVED _UxGT("カードガアリマセン") // "Card removed" #define MSG_LCD_ENDSTOPS _UxGT("エンドストップ") // "Endstops" // Max length 8 characters #define MSG_MAIN _UxGT("メイン") // "Main" #define MSG_AUTOSTART _UxGT("ジドウカイシ") // "Autostart" @@ -139,8 +139,8 @@ #define MSG_PAUSE_PRINT _UxGT("イチジテイシ") // "Pause print" #define MSG_RESUME_PRINT _UxGT("プリントサイカイ") // "Resume print" #define MSG_STOP_PRINT _UxGT("プリントテイシ") // "Stop print" -#define MSG_CARD_MENU _UxGT("SDカードカラプリント") // "Print from SD" -#define MSG_NO_CARD _UxGT("SDカードガアリマセン") // "No SD card" +#define MSG_MEDIA_MENU _UxGT("SDカードカラプリント") // "Print from SD" +#define MSG_NO_MEDIA _UxGT("SDカードガアリマセン") // "No SD card" #define MSG_DWELL _UxGT("キュウシ") // "Sleep..." #define MSG_USERWAIT _UxGT("シバラクオマチクダサイ") // "Wait for user..." #define MSG_PRINT_ABORTED _UxGT("プリントガチュウシサレマシタ") // "Print aborted" @@ -156,8 +156,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("ホショウソクド mm/s") // "UnRet V" #define MSG_AUTORETRACT _UxGT("ジドウヒキコミ") // "AutoRetr." #define MSG_FILAMENTCHANGE _UxGT("フィラメントコウカン") // "Change filament" -#define MSG_INIT_SDCARD _UxGT("SDカードサイヨミコミ") // "Init. SD card" -#define MSG_CHANGE_SDCARD _UxGT("SDカードコウカン") // "Change SD card" +#define MSG_INIT_MEDIA _UxGT("SDカードサイヨミコミ") // "Init. SD card" +#define MSG_CHANGE_MEDIA _UxGT("SDカードコウカン") // "Change SD card" #define MSG_ZPROBE_OUT _UxGT("Zプローブ ベッドガイ") // "Z probe out. bed" #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch ジコシンダン") // "BLTouch Self-Test" #define MSG_BLTOUCH_RESET _UxGT("BLTouch リセット") // "Reset BLTouch" @@ -219,3 +219,5 @@ #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("シバラクオマチクダサイ") // "filament load" #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("プリントヲサイカイシマス") // "Wait for print" #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("シバラクオマチクダサイ") // "to resume" + +#define MSG_EXPECTED_PRINTER _UxGT("間違ったプリンター") // "Wrong printer" diff --git a/Marlin/src/lcd/language/language_ko_KR.h b/Marlin/src/lcd/language/language_ko_KR.h index bf614ad8b..8d24736e6 100644 --- a/Marlin/src/lcd/language/language_ko_KR.h +++ b/Marlin/src/lcd/language/language_ko_KR.h @@ -33,8 +33,8 @@ #define WELCOME_MSG MACHINE_NAME _UxGT(" 준비.") #define MSG_BACK _UxGT("뒤로") -#define MSG_SD_INSERTED _UxGT("카드 삽입됨") -#define MSG_SD_REMOVED _UxGT("카드 제거됨") +#define MSG_MEDIA_INSERTED _UxGT("카드 삽입됨") +#define MSG_MEDIA_REMOVED _UxGT("카드 제거됨") #define MSG_LCD_ENDSTOPS _UxGT("엔드스탑") #define MSG_LCD_SOFT_ENDSTOPS _UxGT("소프트 엔드스탑") #define MSG_MAIN _UxGT("뒤로") @@ -259,8 +259,8 @@ #define MSG_RESUME_PRINT _UxGT("재시작") #define MSG_STOP_PRINT _UxGT("출력중지") //#define MSG_OUTAGE_RECOVERY _UxGT("Outage Recovery") -#define MSG_CARD_MENU _UxGT("SD 카드출력") -#define MSG_NO_CARD _UxGT("SD 카드없음") +#define MSG_MEDIA_MENU _UxGT("SD 카드출력") +#define MSG_NO_MEDIA _UxGT("SD 카드없음") #define MSG_DWELL _UxGT("슬립모드...") //#define MSG_USERWAIT _UxGT("Click to resume...") #define MSG_PRINT_PAUSED _UxGT("일시 정지됨") @@ -282,8 +282,8 @@ //#define MSG_FILAMENTLOAD _UxGT("Load filament") //#define MSG_FILAMENTUNLOAD _UxGT("Unload filament") //#define MSG_FILAMENTUNLOAD_ALL _UxGT("Unload All") -//#define MSG_INIT_SDCARD _UxGT("Init. SD card") -//#define MSG_CHANGE_SDCARD _UxGT("Change SD card") +//#define MSG_INIT_MEDIA _UxGT("Init. SD card") +//#define MSG_CHANGE_MEDIA _UxGT("Change SD card") //#define MSG_ZPROBE_OUT _UxGT("Z Probe past bed") //#define MSG_SKEW_FACTOR _UxGT("Skew Factor") //#define MSG_BLTOUCH _UxGT("BLTouch") @@ -346,6 +346,9 @@ //#define MSG_INFO_PROTOCOL _UxGT("Protocol") //#define MSG_CASE_LIGHT _UxGT("Case light") //#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Light Brightness") + +#define MSG_EXPECTED_PRINTER _UxGT("잘못된 프린터") + #if LCD_WIDTH >= 20 //#define MSG_INFO_PRINT_COUNT _UxGT("Print Count") //#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed") diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h index fbf7c7898..5e95c3554 100644 --- a/Marlin/src/lcd/language/language_nl.h +++ b/Marlin/src/lcd/language/language_nl.h @@ -34,8 +34,8 @@ #define WELCOME_MSG MACHINE_NAME _UxGT(" gereed.") #define MSG_BACK _UxGT("Terug") -#define MSG_SD_INSERTED _UxGT("Kaart ingestoken") -#define MSG_SD_REMOVED _UxGT("Kaart verwijderd") +#define MSG_MEDIA_INSERTED _UxGT("Kaart ingestoken") +#define MSG_MEDIA_REMOVED _UxGT("Kaart verwijderd") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Hoofdmenu") #define MSG_AUTOSTART _UxGT("Autostart") @@ -154,8 +154,8 @@ #define MSG_PAUSE_PRINT _UxGT("Print pauzeren") #define MSG_RESUME_PRINT _UxGT("Print hervatten") #define MSG_STOP_PRINT _UxGT("Print stoppen") -#define MSG_CARD_MENU _UxGT("Print van SD") -#define MSG_NO_CARD _UxGT("Geen SD kaart") +#define MSG_MEDIA_MENU _UxGT("Print van SD") +#define MSG_NO_MEDIA _UxGT("Geen SD kaart") #define MSG_DWELL _UxGT("Slapen...") #define MSG_USERWAIT _UxGT("Wachten...") #define MSG_PRINT_ABORTED _UxGT("Print afgebroken") @@ -171,8 +171,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet F") #define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Verv. Filament") -#define MSG_INIT_SDCARD _UxGT("Init. SD kaart") -#define MSG_CHANGE_SDCARD _UxGT("Verv. SD Kaart") +#define MSG_INIT_MEDIA _UxGT("Init. SD kaart") +#define MSG_CHANGE_MEDIA _UxGT("Verv. SD Kaart") #define MSG_ZPROBE_OUT _UxGT("Z probe uit. bed") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Zelf-Test") #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") @@ -216,6 +216,8 @@ #define MSG_INFO_PROTOCOL _UxGT("Protocol") #define MSG_CASE_LIGHT _UxGT("Case licht") +#define MSG_EXPECTED_PRINTER _UxGT("Onjuiste printer") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Printed Aantal") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Totaal Voltooid") diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h index 92ad95908..575f313df 100644 --- a/Marlin/src/lcd/language/language_pl.h +++ b/Marlin/src/lcd/language/language_pl.h @@ -30,8 +30,8 @@ #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.") -#define MSG_SD_INSERTED _UxGT("Karta włożona") -#define MSG_SD_REMOVED _UxGT("Karta usunięta") +#define MSG_MEDIA_INSERTED _UxGT("Karta włożona") +#define MSG_MEDIA_REMOVED _UxGT("Karta usunięta") #define MSG_LCD_ENDSTOPS _UxGT("Kranców.") // Max length 8 characters #define MSG_MAIN _UxGT("Menu główne") #define MSG_AUTOSTART _UxGT("Autostart") @@ -144,8 +144,8 @@ #define MSG_PAUSE_PRINT _UxGT("Pauza") #define MSG_RESUME_PRINT _UxGT("Wznowienie") #define MSG_STOP_PRINT _UxGT("Stop") -#define MSG_CARD_MENU _UxGT("Karta SD") -#define MSG_NO_CARD _UxGT("Brak karty") +#define MSG_MEDIA_MENU _UxGT("Karta SD") +#define MSG_NO_MEDIA _UxGT("Brak karty") #define MSG_DWELL _UxGT("Uśpij...") #define MSG_USERWAIT _UxGT("Oczekiwanie...") #define MSG_PRINT_ABORTED _UxGT("Druk przerwany") @@ -161,8 +161,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V") #define MSG_AUTORETRACT _UxGT("Auto. wycofanie") #define MSG_FILAMENTCHANGE _UxGT("Zmień filament") -#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD") -#define MSG_CHANGE_SDCARD _UxGT("Zmiana karty SD") +#define MSG_INIT_MEDIA _UxGT("Inicjal. karty SD") +#define MSG_CHANGE_MEDIA _UxGT("Zmiana karty SD") #define MSG_ZPROBE_OUT _UxGT("Sonda Z za stołem") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") @@ -204,6 +204,8 @@ #define MSG_INFO_PROTOCOL _UxGT("Protokół") #define MSG_CASE_LIGHT _UxGT("Oświetlenie") +#define MSG_EXPECTED_PRINTER _UxGT("Niepoprawna drukarka") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono") diff --git a/Marlin/src/lcd/language/language_pt-br.h b/Marlin/src/lcd/language/language_pt-br.h index c07fa199d..9b9745787 100644 --- a/Marlin/src/lcd/language/language_pt-br.h +++ b/Marlin/src/lcd/language/language_pt-br.h @@ -38,8 +38,8 @@ #define WELCOME_MSG MACHINE_NAME _UxGT(" pronto.") #define MSG_BACK _UxGT("Voltar") -#define MSG_SD_INSERTED _UxGT("Cartão inserido") -#define MSG_SD_REMOVED _UxGT("Cartão removido") +#define MSG_MEDIA_INSERTED _UxGT("Cartão inserido") +#define MSG_MEDIA_REMOVED _UxGT("Cartão removido") #define MSG_LCD_ENDSTOPS _UxGT("Fins de curso") #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Fins curso") #define MSG_MAIN _UxGT("Menu principal") @@ -150,7 +150,7 @@ #define MSG_UBL_INVALIDATE_ALL _UxGT("Invalidar tudo") #define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalidar próximo") #define MSG_UBL_FINE_TUNE_ALL _UxGT("Ajuste Fino de Todos") -#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Ajuar Mais Próximo") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Ajustar Mais Próximo") #define MSG_UBL_STORAGE_MESH_MENU _UxGT("Armazenamento Malha") #define MSG_UBL_STORAGE_SLOT _UxGT("Slot de Memória") #define MSG_UBL_LOAD_MESH _UxGT("Ler Malha") @@ -261,7 +261,7 @@ #define MSG_LOAD_EEPROM _UxGT("Ler Configuração") #define MSG_RESTORE_FAILSAFE _UxGT("Restauro seguro") #define MSG_INIT_EEPROM _UxGT("Iniciar EEPROM") -#define MSG_SD_UPDATE _UxGT("Atualiz. SD") +#define MSG_MEDIA_UPDATE _UxGT("Atualiz. SD") #define MSG_RESET_PRINTER _UxGT("Resetar Impressora") #define MSG_REFRESH _UxGT("Atualização") #define MSG_WATCH _UxGT("Informações") @@ -271,8 +271,8 @@ #define MSG_RESUME_PRINT _UxGT("Resumir impressão") #define MSG_STOP_PRINT _UxGT("Parar impressão") #define MSG_OUTAGE_RECOVERY _UxGT("Recuperar Impressão") -#define MSG_CARD_MENU _UxGT("Imprimir do SD") -#define MSG_NO_CARD _UxGT("Sem cartão SD") +#define MSG_MEDIA_MENU _UxGT("Imprimir do SD") +#define MSG_NO_MEDIA _UxGT("Sem cartão SD") #define MSG_DWELL _UxGT("Dormindo...") #define MSG_USERWAIT _UxGT("Clique para retomar") #define MSG_PRINT_PAUSED _UxGT("Impressão Pausada") @@ -299,8 +299,8 @@ #define MSG_FILAMENTLOAD _UxGT("Carregar Filamento") #define MSG_FILAMENTUNLOAD _UxGT("Descarreg. Filamento") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Descarregar Todos") -#define MSG_INIT_SDCARD _UxGT("Iniciar SD") -#define MSG_CHANGE_SDCARD _UxGT("Trocar SD") +#define MSG_INIT_MEDIA _UxGT("Iniciar SD") +#define MSG_CHANGE_MEDIA _UxGT("Trocar SD") #define MSG_ZPROBE_OUT _UxGT("Sonda fora da mesa") #define MSG_SKEW_FACTOR _UxGT("Fator de Cisalho") #define MSG_BLTOUCH _UxGT("BLTouch") @@ -366,6 +366,8 @@ #define MSG_CASE_LIGHT _UxGT("Luz da Impressora") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Intensidade Brilho") +#define MSG_EXPECTED_PRINTER _UxGT("Impressora Incorreta") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Total de Impressões") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Realizadas") diff --git a/Marlin/src/lcd/language/language_pt.h b/Marlin/src/lcd/language/language_pt.h index c6a8367d9..50d9d60c7 100644 --- a/Marlin/src/lcd/language/language_pt.h +++ b/Marlin/src/lcd/language/language_pt.h @@ -34,8 +34,8 @@ #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" pronta.") -#define MSG_SD_INSERTED _UxGT("Cartão inserido") -#define MSG_SD_REMOVED _UxGT("Cartão removido") +#define MSG_MEDIA_INSERTED _UxGT("Cartão inserido") +#define MSG_MEDIA_REMOVED _UxGT("Cartão removido") #define MSG_MAIN _UxGT("Menu principal") #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Desactivar motores") @@ -142,8 +142,8 @@ #define MSG_PAUSE_PRINT _UxGT("Pausar impressão") #define MSG_RESUME_PRINT _UxGT("Retomar impressão") #define MSG_STOP_PRINT _UxGT("Parar impressão") -#define MSG_CARD_MENU _UxGT("Imprimir do SD") -#define MSG_NO_CARD _UxGT("Sem cartão SD") +#define MSG_MEDIA_MENU _UxGT("Imprimir do SD") +#define MSG_NO_MEDIA _UxGT("Sem cartão SD") #define MSG_DWELL _UxGT("Em espera...") #define MSG_USERWAIT _UxGT("Á espera de ordem") #define MSG_PRINT_ABORTED _UxGT("Impressão cancelada") @@ -159,8 +159,8 @@ #define MSG_CONTROL_RETRACT_RECOVERF _UxGT(" DesRet V") #define MSG_AUTORETRACT _UxGT(" AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Trocar filamento") -#define MSG_INIT_SDCARD _UxGT("Inici. cartão SD") -#define MSG_CHANGE_SDCARD _UxGT("Trocar cartão SD") +#define MSG_INIT_MEDIA _UxGT("Inici. cartão SD") +#define MSG_CHANGE_MEDIA _UxGT("Trocar cartão SD") #define MSG_ZPROBE_OUT _UxGT("Sensor fora/base") #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("first") @@ -185,3 +185,5 @@ #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro") #define MSG_LCD_ENDSTOPS _UxGT("Fim de curso") + +#define MSG_EXPECTED_PRINTER _UxGT("Impressora Incorreta") diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h index 9ede1518a..37e19c787 100644 --- a/Marlin/src/lcd/language/language_ru.h +++ b/Marlin/src/lcd/language/language_ru.h @@ -34,9 +34,9 @@ #define WELCOME_MSG MACHINE_NAME _UxGT(" готов.") #define MSG_BACK _UxGT("Назад") -#define MSG_SD_INSERTED _UxGT("Карта вставлена") -#define MSG_SD_REMOVED _UxGT("Карта извлечена") -#define MSG_SD_RELEASED _UxGT("SD карта не активна") +#define MSG_MEDIA_INSERTED _UxGT("Карта вставлена") +#define MSG_MEDIA_REMOVED _UxGT("Карта извлечена") +#define MSG_MEDIA_RELEASED _UxGT("SD карта не активна") #define MSG_LCD_ENDSTOPS _UxGT("Эндстопы") // Max length 8 characters #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Прогр. эндстопы") #define MSG_MAIN _UxGT("Меню") @@ -86,7 +86,7 @@ #define MSG_M48_TEST _UxGT("Проверка датчика Z") #define MSG_M48_DEVIATION _UxGT("Отклонение") -#define MSG_M48_POINT _UxGT("Точка") +#define MSG_M48_POINT _UxGT("Измерение") // TODO: IDEX Menu #define MSG_OFFSETS_MENU _UxGT("Размещение сопел") @@ -255,15 +255,26 @@ #define MSG_LOAD_EEPROM _UxGT("Загрузить настройки") #define MSG_RESTORE_FAILSAFE _UxGT("Вернуть настройки") #define MSG_INIT_EEPROM _UxGT("Инициализация EEPROM") +#define MSG_MEDIA_UPDATE _UxGT("Обновление прошивки") +#define MSG_RESET_PRINTER _UxGT("Сброс принтера") #define MSG_REFRESH _UxGT("Обновить") #define MSG_WATCH _UxGT("Информационный экран") #define MSG_PREPARE _UxGT("Подготовить") #define MSG_TUNE _UxGT("Настроить") +#define MSG_START_PRINT _UxGT("Начало печати") +#define MSG_BUTTON_NEXT _UxGT("Дальше") +#define MSG_BUTTON_INIT _UxGT("Инициализация") +#define MSG_BUTTON_STOP _UxGT("Остановить") +#define MSG_BUTTON_PRINT _UxGT("Печать") +#define MSG_BUTTON_RESET _UxGT("Сброс") +#define MSG_BUTTON_CANCEL _UxGT("Отмена") +#define MSG_BUTTON_DONE _UxGT("Готово") #define MSG_PAUSE_PRINT _UxGT("Пауза печати") #define MSG_RESUME_PRINT _UxGT("Продолжить печать") #define MSG_STOP_PRINT _UxGT("Остановить печать") -#define MSG_CARD_MENU _UxGT("Печать с SD карты") -#define MSG_NO_CARD _UxGT("Нет SD карты") +#define MSG_OUTAGE_RECOVERY _UxGT("Восстановение сбоя") +#define MSG_MEDIA_MENU _UxGT("Печать с SD карты") +#define MSG_NO_MEDIA _UxGT("Нет SD карты") #define MSG_DWELL _UxGT("Сон...") #define MSG_USERWAIT _UxGT("Продолжить...") #define MSG_PRINT_PAUSED _UxGT("Печать на паузе") @@ -292,9 +303,9 @@ #define MSG_FILAMENTLOAD _UxGT("Загрузка филамента") #define MSG_FILAMENTUNLOAD _UxGT("Выгрузка филамента") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Выгрузить всё") -#define MSG_INIT_SDCARD _UxGT("Активировать SD") -#define MSG_CHANGE_SDCARD _UxGT("Сменить SD карту") -#define MSG_RELEASE_SDCARD _UxGT("Деактивировать SD") +#define MSG_INIT_MEDIA _UxGT("Активировать SD") +#define MSG_CHANGE_MEDIA _UxGT("Сменить SD карту") +#define MSG_RELEASE_MEDIA _UxGT("Деактивировать SD") #define MSG_ZPROBE_OUT _UxGT("Z датчик вне стола") #define MSG_SKEW_FACTOR _UxGT("Фактор наклона") #define MSG_BLTOUCH _UxGT("BLTouch") @@ -313,7 +324,7 @@ #define MSG_BABYSTEP_Z _UxGT("Микрошаг Z") #define MSG_ENDSTOP_ABORT _UxGT("Сработал концевик") #define MSG_HEATING_FAILED_LCD _UxGT("Разогрев не удался") -#define MSG_HEATING_FAILED_LCD_BED _UxGT("Разогр. стола не уд.") +#define MSG_HEATING_FAILED_LCD_BED _UxGT("Неудача нагрева стола") #define MSG_ERR_REDUNDANT_TEMP _UxGT("Ошибка: Избыточная Т") #define MSG_THERMAL_RUNAWAY _UxGT("УБЕГАНИЕ ТЕПЛА") #define MSG_THERMAL_RUNAWAY_BED _UxGT("УБЕГАНИЕ ТЕПЛА СТОЛА") @@ -361,6 +372,9 @@ #define MSG_INFO_PROTOCOL _UxGT("Протокол") #define MSG_CASE_LIGHT _UxGT("Подсветка корпуса") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Яркость подсветки") + +#define MSG_EXPECTED_PRINTER _UxGT("Неверный принтер") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Счётчик печати") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Закончено") diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index 58a89de87..e92d741f4 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -43,9 +43,9 @@ #define MSG_YES _UxGT("ÁNO") #define MSG_NO _UxGT("NIE") #define MSG_BACK _UxGT("Naspäť") -#define MSG_SD_INSERTED _UxGT("Karta vložená") -#define MSG_SD_REMOVED _UxGT("Karta vybraná") -#define MSG_SD_RELEASED _UxGT("Karta odpojená") +#define MSG_MEDIA_INSERTED _UxGT("Karta vložená") +#define MSG_MEDIA_REMOVED _UxGT("Karta vybraná") +#define MSG_MEDIA_RELEASED _UxGT("Karta odpojená") #define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znakov #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft. endstopy") #define MSG_MAIN _UxGT("Hlavná ponuka") @@ -281,7 +281,7 @@ #define MSG_LOAD_EEPROM _UxGT("Načítať nastavenie") #define MSG_RESTORE_FAILSAFE _UxGT("Obnoviť nastavenie") #define MSG_INIT_EEPROM _UxGT("Inicializ. EEPROM") -#define MSG_SD_UPDATE _UxGT("Aktualizovať z SD") +#define MSG_MEDIA_UPDATE _UxGT("Aktualizovať z SD") #define MSG_RESET_PRINTER _UxGT("Reštart. tlačiar.") #define MSG_REFRESH _UxGT("Obnoviť") #define MSG_WATCH _UxGT("Info. obrazovka") @@ -299,8 +299,8 @@ #define MSG_RESUME_PRINT _UxGT("Obnoviť tlač") #define MSG_STOP_PRINT _UxGT("Zastaviť tlač") #define MSG_OUTAGE_RECOVERY _UxGT("Obnova po výp. nap.") -#define MSG_CARD_MENU _UxGT("Tlačiť z SD") -#define MSG_NO_CARD _UxGT("Žiadna SD karta") +#define MSG_MEDIA_MENU _UxGT("Tlačiť z SD") +#define MSG_NO_MEDIA _UxGT("Žiadna SD karta") #define MSG_DWELL _UxGT("Spím...") #define MSG_USERWAIT _UxGT("Pokrač. kliknutím...") #define MSG_PRINT_PAUSED _UxGT("Tlač pozastavená") @@ -329,9 +329,9 @@ #define MSG_FILAMENTUNLOAD _UxGT("Vysunúť filament") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Vysunúť všetko") -#define MSG_INIT_SDCARD _UxGT("Načítať SD kartu") -#define MSG_CHANGE_SDCARD _UxGT("Vymeniť SD kartu") -#define MSG_RELEASE_SDCARD _UxGT("Odpojiť SD kartu") +#define MSG_INIT_MEDIA _UxGT("Načítať SD kartu") +#define MSG_CHANGE_MEDIA _UxGT("Vymeniť SD kartu") +#define MSG_RELEASE_MEDIA _UxGT("Odpojiť SD kartu") #define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl.") #define MSG_SKEW_FACTOR _UxGT("Faktor skosenia") #define MSG_BLTOUCH _UxGT("BLTouch") @@ -415,6 +415,8 @@ #define MSG_CASE_LIGHT _UxGT("Osvetlenie") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Jas svetla") +#define MSG_EXPECTED_PRINTER _UxGT("Nesprávna tlačiareň") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Počet tlačí") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Dokončené") diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h index 551991b99..de4875900 100644 --- a/Marlin/src/lcd/language/language_tr.h +++ b/Marlin/src/lcd/language/language_tr.h @@ -1,4 +1,4 @@ -/** + /** * Marlin 3D Printer Firmware * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -39,8 +39,8 @@ #define WELCOME_MSG MACHINE_NAME _UxGT(" hazır.") #define MSG_BACK _UxGT("Geri") -#define MSG_SD_INSERTED _UxGT("SD K. Yerleştirildi.") -#define MSG_SD_REMOVED _UxGT("SD Kart Çıkarıldı.") +#define MSG_MEDIA_INSERTED _UxGT("SD K. Yerleştirildi.") +#define MSG_MEDIA_REMOVED _UxGT("SD Kart Çıkarıldı.") #define MSG_LCD_ENDSTOPS _UxGT("Enstops") // Max length 8 characters #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Yazılımsal Endstops") #define MSG_MAIN _UxGT("Ana") @@ -260,7 +260,7 @@ #define MSG_LOAD_EEPROM _UxGT("Hafızadan Yükle") #define MSG_RESTORE_FAILSAFE _UxGT("Fabrika Ayarları") #define MSG_INIT_EEPROM _UxGT("EEPROM'u başlat") -#define MSG_SD_UPDATE _UxGT("SD Güncellemesi") +#define MSG_MEDIA_UPDATE _UxGT("SD Güncellemesi") #define MSG_RESET_PRINTER _UxGT("Yazıcıyı Resetle") #define MSG_REFRESH _UxGT("Yenile") #define MSG_WATCH _UxGT("Bilgi Ekranı") @@ -270,8 +270,8 @@ #define MSG_RESUME_PRINT _UxGT("Sürdür") #define MSG_STOP_PRINT _UxGT("Durdur") #define MSG_OUTAGE_RECOVERY _UxGT("Kesinti Kurtarma") -#define MSG_CARD_MENU _UxGT("SD Karttan Yazdır") -#define MSG_NO_CARD _UxGT("SD Kart Yok!") +#define MSG_MEDIA_MENU _UxGT("SD Karttan Yazdır") +#define MSG_NO_MEDIA _UxGT("SD Kart Yok!") #define MSG_DWELL _UxGT("Uyku...") #define MSG_USERWAIT _UxGT("Operatör bekleniyor.") #define MSG_PRINT_PAUSED _UxGT("Baskı Duraklatıldı") @@ -298,8 +298,8 @@ #define MSG_FILAMENTLOAD _UxGT("Filaman Yükle") #define MSG_FILAMENTUNLOAD _UxGT("Filaman Çıkart") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Tümünü Çıkart") -#define MSG_INIT_SDCARD _UxGT("SD Kart Başlatılıyor") -#define MSG_CHANGE_SDCARD _UxGT("SD Kart Değiştir") +#define MSG_INIT_MEDIA _UxGT("SD Kart Başlatılıyor") +#define MSG_CHANGE_MEDIA _UxGT("SD Kart Değiştir") #define MSG_ZPROBE_OUT _UxGT("Z Prob Açık. Tabla") #define MSG_SKEW_FACTOR _UxGT("Çarpıklık Faktörü") #define MSG_BLTOUCH _UxGT("BLTouch") @@ -362,6 +362,9 @@ #define MSG_INFO_PROTOCOL _UxGT("Protokol") #define MSG_CASE_LIGHT _UxGT("Aydınlatmayı Aç") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Aydınlatma Parlaklğı") + +#define MSG_EXPECTED_PRINTER _UxGT("Yanlış Yazıcı") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Baskı Sayısı") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Tamamlanan") diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h index 763a2f559..7e866668c 100644 --- a/Marlin/src/lcd/language/language_uk.h +++ b/Marlin/src/lcd/language/language_uk.h @@ -33,8 +33,8 @@ #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" готовий.") -#define MSG_SD_INSERTED _UxGT("Картка вставлена") -#define MSG_SD_REMOVED _UxGT("Картка видалена") +#define MSG_MEDIA_INSERTED _UxGT("Картка вставлена") +#define MSG_MEDIA_REMOVED _UxGT("Картка видалена") #define MSG_LCD_ENDSTOPS _UxGT("Кінцевик") // Max length 8 characters #define MSG_MAIN _UxGT("Меню") #define MSG_AUTOSTART _UxGT("Автостарт") @@ -145,8 +145,8 @@ #define MSG_PAUSE_PRINT _UxGT("Призупинити друк") #define MSG_RESUME_PRINT _UxGT("Відновити друк") #define MSG_STOP_PRINT _UxGT("Скасувати друк") -#define MSG_CARD_MENU _UxGT("Друкувати з SD") -#define MSG_NO_CARD _UxGT("Відсутня SD карт.") +#define MSG_MEDIA_MENU _UxGT("Друкувати з SD") +#define MSG_NO_MEDIA _UxGT("Відсутня SD карт.") #define MSG_DWELL _UxGT("Сплячка...") #define MSG_USERWAIT _UxGT("Очікування дій...") #define MSG_PRINT_ABORTED _UxGT("Друк скасовано") @@ -154,8 +154,8 @@ #define MSG_KILLED _UxGT("ПЕРЕРВАНО. ") #define MSG_STOPPED _UxGT("ЗУПИНЕНО. ") #define MSG_FILAMENTCHANGE _UxGT("Зміна волокна") -#define MSG_INIT_SDCARD _UxGT("Старт SD картки") -#define MSG_CHANGE_SDCARD _UxGT("Заміна SD карти") +#define MSG_INIT_MEDIA _UxGT("Старт SD картки") +#define MSG_CHANGE_MEDIA _UxGT("Заміна SD карти") #define MSG_ZPROBE_OUT _UxGT("Z дет. не в межах") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Само-Тест") #define MSG_BLTOUCH_RESET _UxGT("Скинути BLTouch") @@ -192,6 +192,8 @@ #define MSG_INFO_PROTOCOL _UxGT("Протокол") #define MSG_CASE_LIGHT _UxGT("Підсвітка") +#define MSG_EXPECTED_PRINTER _UxGT("Неправильний принтер") + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("К-сть друків") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Завершено") diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index 19ef30056..bad55c974 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -33,8 +33,8 @@ #define WELCOME_MSG MACHINE_NAME _UxGT("已就绪.") //" ready." #define MSG_BACK _UxGT("返回") // ”Back“ -#define MSG_SD_INSERTED _UxGT("存储卡已插入") //"Card inserted" -#define MSG_SD_REMOVED _UxGT("存储卡被拔出") //"Card removed" +#define MSG_MEDIA_INSERTED _UxGT("存储卡已插入") //"Card inserted" +#define MSG_MEDIA_REMOVED _UxGT("存储卡被拔出") //"Card removed" #define MSG_LCD_ENDSTOPS _UxGT("挡块") //"Endstops" // Max length 8 characters #define MSG_MAIN _UxGT("主菜单") //"Main" #define MSG_AUTOSTART _UxGT("自动开始") //"Autostart" @@ -243,8 +243,8 @@ #define MSG_PAUSE_PRINT _UxGT("暂停打印") //"Pause print" #define MSG_RESUME_PRINT _UxGT("恢复打印") //"Resume print" #define MSG_STOP_PRINT _UxGT("停止打印") //"Stop print" -#define MSG_CARD_MENU _UxGT("从存储卡上打印") //"Print from SD" -#define MSG_NO_CARD _UxGT("无存储卡") //"No SD card" +#define MSG_MEDIA_MENU _UxGT("从存储卡上打印") //"Print from SD" +#define MSG_NO_MEDIA _UxGT("无存储卡") //"No SD card" #define MSG_DWELL _UxGT("休眠中 ...") //"Sleep..." #define MSG_USERWAIT _UxGT("点击继续 ...") //"Click to resume..." #define MSG_PRINT_PAUSED _UxGT("暫停打印") // "Print paused" @@ -265,8 +265,8 @@ #define MSG_FILAMENTLOAD _UxGT("装载丝料") // "Load filament" #define MSG_FILAMENTUNLOAD _UxGT("卸载丝料") // "Unload filament" #define MSG_FILAMENTUNLOAD_ALL _UxGT("卸载全部") // "Unload All" -#define MSG_INIT_SDCARD _UxGT("初始化存储卡") //"Init. SD card" -#define MSG_CHANGE_SDCARD _UxGT("更换存储卡") //"Change SD card" +#define MSG_INIT_MEDIA _UxGT("初始化存储卡") //"Init. SD card" +#define MSG_CHANGE_MEDIA _UxGT("更换存储卡") //"Change SD card" #define MSG_ZPROBE_OUT _UxGT("Z探针在热床之外") //"Z probe out. bed" Z probe is not within the physical limits #define MSG_SKEW_FACTOR _UxGT("偏斜因数") // "Skew Factor" #define MSG_BLTOUCH _UxGT("BLTouch") // "BLTouch" @@ -323,6 +323,8 @@ #define MSG_CASE_LIGHT _UxGT("外壳灯") // "Case light" #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("灯亮度") // "Light BRIGHTNESS" +#define MSG_EXPECTED_PRINTER _UxGT("打印机不正确") // "The printer is incorrect" + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("打印计数") //"Print Count" #define MSG_INFO_COMPLETED_PRINTS _UxGT("完成了") //"Completed" diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h index ed1e40cee..e9e871ac2 100644 --- a/Marlin/src/lcd/language/language_zh_TW.h +++ b/Marlin/src/lcd/language/language_zh_TW.h @@ -33,8 +33,8 @@ #define WELCOME_MSG MACHINE_NAME _UxGT("已就緒.") //" ready." #define MSG_BACK _UxGT("返回") // ”Back“ -#define MSG_SD_INSERTED _UxGT("記憶卡已插入") //"Card inserted" -#define MSG_SD_REMOVED _UxGT("記憶卡被拔出") //"Card removed" +#define MSG_MEDIA_INSERTED _UxGT("記憶卡已插入") //"Card inserted" +#define MSG_MEDIA_REMOVED _UxGT("記憶卡被拔出") //"Card removed" #define MSG_LCD_ENDSTOPS _UxGT("擋塊") //"Endstops" // Max length 8 characters #define MSG_MAIN _UxGT("主選單") //"Main" #define MSG_AUTOSTART _UxGT("自動開始") //"Autostart" @@ -243,8 +243,8 @@ #define MSG_PAUSE_PRINT _UxGT("暫停列印") //"Pause print" #define MSG_RESUME_PRINT _UxGT("恢復列印") //"Resume print" #define MSG_STOP_PRINT _UxGT("停止列印") //"Stop print" -#define MSG_CARD_MENU _UxGT("從記憶卡上列印") //"Print from SD" -#define MSG_NO_CARD _UxGT("無記憶卡") //"No SD card" +#define MSG_MEDIA_MENU _UxGT("從記憶卡上列印") //"Print from SD" +#define MSG_NO_MEDIA _UxGT("無記憶卡") //"No SD card" #define MSG_DWELL _UxGT("休眠 ...") //"Sleep..." #define MSG_USERWAIT _UxGT("點擊繼續 ...") //"Click to resume..." #define MSG_PRINT_PAUSED _UxGT("列印已暫停") // "Print paused" @@ -265,8 +265,8 @@ #define MSG_FILAMENTLOAD _UxGT("裝載絲料") // "Load filament" #define MSG_FILAMENTUNLOAD _UxGT("卸載絲料") // "Unload filament" #define MSG_FILAMENTUNLOAD_ALL _UxGT("卸載全部") // "Unload All" -#define MSG_INIT_SDCARD _UxGT("初始化記憶卡") //"Init. SD card" -#define MSG_CHANGE_SDCARD _UxGT("更換記憶卡") //"Change SD card" +#define MSG_INIT_MEDIA _UxGT("初始化記憶卡") //"Init. SD card" +#define MSG_CHANGE_MEDIA _UxGT("更換記憶卡") //"Change SD card" #define MSG_ZPROBE_OUT _UxGT("Z探針在熱床之外") //"Z probe out. bed" Z probe is not within the physical limits #define MSG_SKEW_FACTOR _UxGT("偏斜因數") // "Skew Factor" #define MSG_BLTOUCH _UxGT("BLTouch") // "BLTouch" @@ -323,6 +323,8 @@ #define MSG_CASE_LIGHT _UxGT("外殼燈") // "Case light" #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("燈亮度") // "Light BRIGHTNESS" +#define MSG_EXPECTED_PRINTER _UxGT("打印機不正確") // "The printer is incorrect" + #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("列印計數") //"Print Count" #define MSG_INFO_COMPLETED_PRINTS _UxGT("已完成") //"Completed" diff --git a/Marlin/src/lcd/lcdprint.h b/Marlin/src/lcd/lcdprint.h index 59cd54685..9e9d6418d 100644 --- a/Marlin/src/lcd/lcdprint.h +++ b/Marlin/src/lcd/lcdprint.h @@ -14,8 +14,10 @@ #if HAS_GRAPHICAL_LCD #include "dogm/u8g_fontutf8.h" + typedef u8g_uint_t lcd_uint_t; #else #define _UxGT(a) a + typedef uint8_t lcd_uint_t; #endif #define START_OF_UTF8_CHAR(C) (((C) & 0xC0u) != 0x80u) @@ -36,6 +38,11 @@ int lcd_put_wchar_max(wchar_t c, pixel_len_t max_length); */ int lcd_put_u8str_max(const char * utf8_str, pixel_len_t max_length); +/** + * Set the print baseline position + */ +void lcd_moveto(const lcd_uint_t col, const lcd_uint_t row); + /** * @brief Draw a ROM UTF-8 string * @@ -47,13 +54,19 @@ int lcd_put_u8str_max(const char * utf8_str, pixel_len_t max_length); * Draw a ROM UTF-8 string */ int lcd_put_u8str_max_P(PGM_P utf8_str_P, pixel_len_t max_length); - -void lcd_moveto(const uint8_t col, const uint8_t row); +inline int lcd_put_u8str_max_P(const lcd_uint_t col, const lcd_uint_t row, PGM_P utf8_str_P, pixel_len_t max_length) { + lcd_moveto(col, row); + return lcd_put_u8str_max_P(utf8_str_P, max_length); +} void lcd_put_int(const int i); +inline void lcd_put_int(const lcd_uint_t col, const lcd_uint_t row, const int i) { lcd_moveto(col, row); lcd_put_int(i); } inline int lcd_put_u8str_P(PGM_P str) { return lcd_put_u8str_max_P(str, PIXEL_LEN_NOLIMIT); } +inline int lcd_put_u8str_P(const lcd_uint_t col, const lcd_uint_t row, PGM_P str) { lcd_moveto(col, row); return lcd_put_u8str_P(str); } inline int lcd_put_u8str(const char* str) { return lcd_put_u8str_max(str, PIXEL_LEN_NOLIMIT); } +inline int lcd_put_u8str(const lcd_uint_t col, const lcd_uint_t row, PGM_P str) { lcd_moveto(col, row); return lcd_put_u8str(str); } inline int lcd_put_wchar(const wchar_t c) { return lcd_put_wchar_max(c, PIXEL_LEN_NOLIMIT); } +inline int lcd_put_wchar(const lcd_uint_t col, const lcd_uint_t row, const wchar_t c) { lcd_moveto(col, row); return lcd_put_wchar(c); } diff --git a/Marlin/src/lcd/menu/game/brickout.cpp b/Marlin/src/lcd/menu/game/brickout.cpp index b13649ca9..921a6f6e3 100644 --- a/Marlin/src/lcd/menu/game/brickout.cpp +++ b/Marlin/src/lcd/menu/game/brickout.cpp @@ -180,8 +180,7 @@ void BrickoutGame::game_screen() { // Score Digits //const uint8_t sx = (LCD_PIXEL_WIDTH - (score >= 10 ? score >= 100 ? score >= 1000 ? 4 : 3 : 2 : 1) * MENU_FONT_WIDTH) / 2; constexpr uint8_t sx = 0; - lcd_moveto(sx, MENU_FONT_ASCENT - 1); - lcd_put_int(score); + lcd_put_int(sx, MENU_FONT_ASCENT - 1, score); // Balls Left lcd_moveto(LCD_PIXEL_WIDTH - MENU_FONT_WIDTH * 3, MENU_FONT_ASCENT - 1); diff --git a/Marlin/src/lcd/menu/game/game.cpp b/Marlin/src/lcd/menu/game/game.cpp index 1f1982615..6f8d24769 100644 --- a/Marlin/src/lcd/menu/game/game.cpp +++ b/Marlin/src/lcd/menu/game/game.cpp @@ -48,10 +48,7 @@ void MarlinGame::draw_game_over() { u8g.setColorIndex(0); u8g.drawBox(lx - 1, ly - gohigh - 1, gowide + 2, gohigh + 2); u8g.setColorIndex(1); - if (ui.get_blink()) { - lcd_moveto(lx, ly); - lcd_put_u8str_P(PSTR("GAME OVER")); - } + if (ui.get_blink()) lcd_put_u8str_P(lx, ly, PSTR("GAME OVER")); } } diff --git a/Marlin/src/lcd/menu/game/invaders.cpp b/Marlin/src/lcd/menu/game/invaders.cpp index c183867ea..4517c5f43 100644 --- a/Marlin/src/lcd/menu/game/invaders.cpp +++ b/Marlin/src/lcd/menu/game/invaders.cpp @@ -416,8 +416,7 @@ void InvadersGame::game_screen() { // Draw Score //const uint8_t sx = (LCD_PIXEL_WIDTH - (score >= 10 ? score >= 100 ? score >= 1000 ? 4 : 3 : 2 : 1) * MENU_FONT_WIDTH) / 2; constexpr uint8_t sx = 0; - lcd_moveto(sx, MENU_FONT_ASCENT - 1); - lcd_put_int(score); + lcd_put_int(sx, MENU_FONT_ASCENT - 1, score); // Draw lives if (idat.cannons_left) diff --git a/Marlin/src/lcd/menu/game/maze.cpp b/Marlin/src/lcd/menu/game/maze.cpp index bb07ce0d6..13784f0d7 100644 --- a/Marlin/src/lcd/menu/game/maze.cpp +++ b/Marlin/src/lcd/menu/game/maze.cpp @@ -80,10 +80,7 @@ void MazeGame::game_screen() { u8g.setColorIndex(1); // Draw Score - if (PAGE_UNDER(HEADER_H)) { - lcd_moveto(0, HEADER_H - 1); - lcd_put_int(score); - } + if (PAGE_UNDER(HEADER_H)) lcd_put_int(0, HEADER_H - 1, score); // Draw the maze // for (uint8_t n = 0; n < head_ind; ++n) { diff --git a/Marlin/src/lcd/menu/game/snake.cpp b/Marlin/src/lcd/menu/game/snake.cpp index f12a8b395..713c2ddd7 100644 --- a/Marlin/src/lcd/menu/game/snake.cpp +++ b/Marlin/src/lcd/menu/game/snake.cpp @@ -231,10 +231,7 @@ void SnakeGame::game_screen() { u8g.setColorIndex(1); // Draw Score - if (PAGE_UNDER(HEADER_H)) { - lcd_moveto(0, HEADER_H - 1); - lcd_put_int(score); - } + if (PAGE_UNDER(HEADER_H)) lcd_put_int(0, HEADER_H - 1, score); // DRAW THE PLAYFIELD BORDER u8g.drawFrame(BOARD_L - 2, BOARD_T - 2, BOARD_R - BOARD_L + 4, BOARD_B - BOARD_T + 4); diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp index 9bea6c135..34e01b09c 100644 --- a/Marlin/src/lcd/menu/menu.cpp +++ b/Marlin/src/lcd/menu/menu.cpp @@ -88,10 +88,21 @@ void MarlinUI::save_previous_screen() { screen_history[screen_history_depth++] = { currentScreen, encoderPosition, encoderTopLine, screen_items }; } -void MarlinUI::goto_previous_screen() { +void MarlinUI::goto_previous_screen( + #if ENABLED(TURBO_BACK_MENU_ITEM) + const bool is_back/*=false*/ + #endif +) { + #if DISABLED(TURBO_BACK_MENU_ITEM) + constexpr bool is_back = false; + #endif if (screen_history_depth > 0) { menuPosition &sh = screen_history[--screen_history_depth]; - goto_screen(sh.menu_function, sh.encoder_position, sh.top_line, sh.items); + goto_screen(sh.menu_function, + is_back ? 0 : sh.encoder_position, + is_back ? 0 : sh.top_line, + sh.items + ); } else return_to_status(); diff --git a/Marlin/src/lcd/menu/menu.h b/Marlin/src/lcd/menu/menu.h index b1b2bba16..da1b9a7a7 100644 --- a/Marlin/src/lcd/menu/menu.h +++ b/Marlin/src/lcd/menu/menu.h @@ -46,7 +46,7 @@ bool printer_busy(); static inline char* strfunc(const float value) { return STRFUNC((TYPE) value); } \ }; -DECLARE_MENU_EDIT_TYPE(uint8_t, percent, ui8tostr4pct, 1 ); // 100% right-justified +DECLARE_MENU_EDIT_TYPE(uint8_t, percent, ui8tostr4pct, 100.0/255); // 100% right-justified DECLARE_MENU_EDIT_TYPE(int16_t, int3, i16tostr3, 1 ); // 123, -12 right-justified DECLARE_MENU_EDIT_TYPE(int16_t, int4, i16tostr4sign, 1 ); // 1234, -123 right-justified DECLARE_MENU_EDIT_TYPE(int8_t, int8, i8tostr3, 1 ); // 123, -12 right-justified @@ -144,7 +144,13 @@ DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(long5_25); // 12345 right-justif class MenuItem_back { public: - static inline void action() { ui.goto_previous_screen(); } + static inline void action() { + ui.goto_previous_screen( + #if ENABLED(TURBO_BACK_MENU_ITEM) + true + #endif + ); + } }; class MenuItem_submenu { @@ -351,7 +357,7 @@ void menu_main(); void menu_move(); #if ENABLED(SDSUPPORT) - void menu_sdcard(); + void menu_media(); #endif // First Fan Speed title in "Tune" and "Control>Temperature" menus diff --git a/Marlin/src/lcd/menu/menu_advanced.cpp b/Marlin/src/lcd/menu/menu_advanced.cpp index 2dc66cee4..a6bfea688 100644 --- a/Marlin/src/lcd/menu/menu_advanced.cpp +++ b/Marlin/src/lcd/menu/menu_advanced.cpp @@ -699,7 +699,7 @@ void menu_advanced_settings() { #if ENABLED(SD_FIRMWARE_UPDATE) bool sd_update_state = settings.sd_update_status(); - MENU_ITEM_EDIT_CALLBACK(bool, MSG_SD_UPDATE, &sd_update_state, []{ + MENU_ITEM_EDIT_CALLBACK(bool, MSG_MEDIA_UPDATE, &sd_update_state, []{ // // Toggle the SD Firmware Update state in EEPROM // diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp index 29ab1a171..0bc3963f2 100644 --- a/Marlin/src/lcd/menu/menu_configuration.cpp +++ b/Marlin/src/lcd/menu/menu_configuration.cpp @@ -76,8 +76,7 @@ static void lcd_factory_settings() { LIMIT(bar_percent, 0, 100); ui.encoderPosition = 0; draw_menu_item_static(0, PSTR(MSG_PROGRESS_BAR_TEST), true, true); - lcd_moveto((LCD_WIDTH) / 2 - 2, LCD_HEIGHT - 2); - lcd_put_int(bar_percent); lcd_put_wchar('%'); + lcd_put_int((LCD_WIDTH) / 2 - 2, LCD_HEIGHT - 2, bar_percent); lcd_put_wchar('%'); lcd_moveto(0, LCD_HEIGHT - 1); ui.draw_progress_bar(bar_percent); } @@ -148,9 +147,9 @@ static void lcd_factory_settings() { #if ENABLED(DUAL_X_CARRIAGE) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_X_OFFSET, &hotend_offset[X_AXIS][1], float(X2_HOME_POS - 25), float(X2_HOME_POS + 25), _recalc_offsets); #else - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52sign, MSG_X_OFFSET, &hotend_offset[X_AXIS][1], -10.0, 10.0, _recalc_offsets); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52sign, MSG_X_OFFSET, &hotend_offset[X_AXIS][1], -99.0, 99.0, _recalc_offsets); #endif - MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52sign, MSG_Y_OFFSET, &hotend_offset[Y_AXIS][1], -10.0, 10.0, _recalc_offsets); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52sign, MSG_Y_OFFSET, &hotend_offset[Y_AXIS][1], -99.0, 99.0, _recalc_offsets); MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52sign, MSG_Z_OFFSET, &hotend_offset[Z_AXIS][1], Z_PROBE_LOW_POINT, 10.0, _recalc_offsets); #if ENABLED(EEPROM_SETTINGS) MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); diff --git a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp index a4770d0f8..3925bfbbb 100644 --- a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp +++ b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp @@ -36,6 +36,10 @@ #include "../../feature/bedlevel/bedlevel.h" #endif +#if ENABLED(EXTENSIBLE_UI) + #include "../../lcd/extensible_ui/ui_api.h" +#endif + void _man_probe_pt(const float &rx, const float &ry) { do_blocking_move_to(rx, ry, Z_CLEARANCE_BETWEEN_PROBES); ui.synchronize(); @@ -55,6 +59,9 @@ void _man_probe_pt(const float &rx, const float &ry) { #if ENABLED(HOST_PROMPT_SUPPORT) host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Delta Calibration in progress"), PSTR("Continue")); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::onStatusChanged(PSTR("Delta Calibration in progress")); + #endif while (wait_for_user) idle(); ui.goto_previous_screen_no_defer(); return current_position[Z_AXIS]; diff --git a/Marlin/src/lcd/menu/menu_game.cpp b/Marlin/src/lcd/menu/menu_game.cpp index f5eb60a87..36b7f1831 100644 --- a/Marlin/src/lcd/menu/menu_game.cpp +++ b/Marlin/src/lcd/menu/menu_game.cpp @@ -46,4 +46,3 @@ void menu_game() { } #endif // HAS_GAME_MENU - diff --git a/Marlin/src/lcd/menu/menu_info.cpp b/Marlin/src/lcd/menu/menu_info.cpp index 08edaea43..cf10f6951 100644 --- a/Marlin/src/lcd/menu/menu_info.cpp +++ b/Marlin/src/lcd/menu/menu_info.cpp @@ -165,7 +165,7 @@ void menu_info_thermistors() { void menu_info_board() { if (ui.use_click()) return ui.goto_previous_screen(); START_SCREEN(); - STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController + STATIC_ITEM(BOARD_INFO_NAME, true, true); // MyPrinterController STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000 STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION, true); // Protocol: 1.0 STATIC_ITEM(MSG_INFO_PSU ": " PSU_NAME, true); @@ -240,6 +240,7 @@ void menu_info() { #if ENABLED(GAMES_EASTER_EGG) MENU_ITEM_DUMMY(); MENU_ITEM_DUMMY(); + MENU_ITEM_DUMMY(); #endif MENU_ITEM(submenu, MSG_GAMES, ( #if HAS_GAME_MENU diff --git a/Marlin/src/lcd/menu/menu_main.cpp b/Marlin/src/lcd/menu/menu_main.cpp index 8b0a40b6b..1ccbfd38b 100644 --- a/Marlin/src/lcd/menu/menu_main.cpp +++ b/Marlin/src/lcd/menu/menu_main.cpp @@ -126,22 +126,22 @@ void menu_main() { if (card_detected) { if (!card_open) { - MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard); + MENU_ITEM(submenu, MSG_MEDIA_MENU, menu_media); MENU_ITEM(gcode, #if PIN_EXISTS(SD_DETECT) - MSG_CHANGE_SDCARD, PSTR("M21") + MSG_CHANGE_MEDIA, PSTR("M21") #else - MSG_RELEASE_SDCARD, PSTR("M22") + MSG_RELEASE_MEDIA, PSTR("M22") #endif ); } } else { #if PIN_EXISTS(SD_DETECT) - MENU_ITEM(function, MSG_NO_CARD, nullptr); + MENU_ITEM(function, MSG_NO_MEDIA, nullptr); #else - MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); - MENU_ITEM(function, MSG_SD_RELEASED, nullptr); + MENU_ITEM(gcode, MSG_INIT_MEDIA, PSTR("M21")); + MENU_ITEM(function, MSG_MEDIA_RELEASED, nullptr); #endif } #endif // !HAS_ENCODER_WHEEL && SDSUPPORT @@ -219,20 +219,20 @@ void menu_main() { if (!card_open) { MENU_ITEM(gcode, #if PIN_EXISTS(SD_DETECT) - MSG_CHANGE_SDCARD, PSTR("M21") + MSG_CHANGE_MEDIA, PSTR("M21") #else - MSG_RELEASE_SDCARD, PSTR("M22") + MSG_RELEASE_MEDIA, PSTR("M22") #endif ); - MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard); + MENU_ITEM(submenu, MSG_MEDIA_MENU, menu_media); } } else { #if PIN_EXISTS(SD_DETECT) - MENU_ITEM(function, MSG_NO_CARD, nullptr); + MENU_ITEM(function, MSG_NO_MEDIA, nullptr); #else - MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); - MENU_ITEM(function, MSG_SD_RELEASED, nullptr); + MENU_ITEM(gcode, MSG_INIT_MEDIA, PSTR("M21")); + MENU_ITEM(function, MSG_MEDIA_RELEASED, nullptr); #endif } #endif // HAS_ENCODER_WHEEL && SDSUPPORT diff --git a/Marlin/src/lcd/menu/menu_sdcard.cpp b/Marlin/src/lcd/menu/menu_media.cpp similarity index 95% rename from Marlin/src/lcd/menu/menu_sdcard.cpp rename to Marlin/src/lcd/menu/menu_media.cpp index 894d9288a..037f98531 100644 --- a/Marlin/src/lcd/menu/menu_sdcard.cpp +++ b/Marlin/src/lcd/menu/menu_media.cpp @@ -62,7 +62,7 @@ void lcd_sd_updir() { // ui.drawing_screen = screen_changed = true; //#endif - goto_screen(menu_sdcard, sd_encoder_position, sd_top_line, sd_items); + goto_screen(menu_media, sd_encoder_position, sd_top_line, sd_items); sd_encoder_position = 0xFFFF; defer_status_screen(); @@ -122,7 +122,7 @@ class MenuItem_sdfolder { } }; -void menu_sdcard() { +void menu_media() { ui.encoder_direction_menus(); const uint16_t fileCnt = card.get_num_Files(); @@ -149,9 +149,9 @@ void menu_sdcard() { card.getfilename_sorted(nr); if (card.flag.filenameIsDir) - MENU_ITEM(sdfolder, MSG_CARD_MENU, card); + MENU_ITEM(sdfolder, MSG_MEDIA_MENU, card); else - MENU_ITEM(sdfile, MSG_CARD_MENU, card); + MENU_ITEM(sdfile, MSG_MEDIA_MENU, card); } else { MENU_ITEM_DUMMY(); diff --git a/Marlin/src/lcd/menu/menu_ubl.cpp b/Marlin/src/lcd/menu/menu_ubl.cpp index b3bb94cb1..85e42a8b8 100644 --- a/Marlin/src/lcd/menu/menu_ubl.cpp +++ b/Marlin/src/lcd/menu/menu_ubl.cpp @@ -37,10 +37,9 @@ static int16_t ubl_storage_slot = 0, custom_hotend_temp = 190, side_points = 3, ubl_fillin_amount = 5, - ubl_height_amount = 1, - n_edit_pts = 1, - x_plot = 0, - y_plot = 0; + ubl_height_amount = 1; + +static uint8_t n_edit_pts = 1, x_plot = 0, y_plot = 0; #if HAS_HEATED_BED static int16_t custom_bed_temp = 50; @@ -423,7 +422,7 @@ void _lcd_ubl_map_lcd_edit_cmd() { char ubl_lcd_gcode[50], str[10], str2[10]; dtostrf(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot]), 0, 2, str); dtostrf(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot]), 0, 2, str2); - snprintf_P(ubl_lcd_gcode, sizeof(ubl_lcd_gcode), PSTR("G29 P4 X%s Y%s R%i"), str, str2, n_edit_pts); + snprintf_P(ubl_lcd_gcode, sizeof(ubl_lcd_gcode), PSTR("G29 P4 X%s Y%s R%i"), str, str2, int(n_edit_pts)); lcd_enqueue_one_now(ubl_lcd_gcode); } diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index a54bb9b36..f201c1b2a 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -64,6 +64,19 @@ uint8_t MarlinUI::progress_bar_percent; // = 0 #endif +#if HAS_BUZZER + #include "../libs/buzzer.h" + void MarlinUI::buzz(const long duration, const uint16_t freq) { + #if ENABLED(LCD_USE_I2C_BUZZER) + lcd.buzz(duration, freq); + #elif ENABLED(PCA9632_BUZZER) + pca9632_buzz(const long duration, const uint16_t freq) { + #elif USE_BEEPER + buzzer.tone(duration, freq); + #endif + } +#endif + #if HAS_SPI_LCD #if HAS_GRAPHICAL_LCD @@ -89,10 +102,6 @@ #include "../feature/bedlevel/bedlevel.h" #endif -#if HAS_BUZZER - #include "../libs/buzzer.h" -#endif - #if HAS_TRINAMIC #include "../feature/tmc_util.h" #endif @@ -205,13 +214,13 @@ millis_t next_button_update_ms; #endif - void _wrap_string(uint8_t &x, uint8_t &y, const char * const string, read_byte_cb_t cb_read_byte, bool wordwrap/*=false*/) { - SETCURSOR(x, y); + void _wrap_string(uint8_t &col, uint8_t &row, const char * const string, read_byte_cb_t cb_read_byte, bool wordwrap/*=false*/) { + SETCURSOR(col, row); if (!string) return; - auto _newline = [&x, &y]() { - x = 0; y++; // move x to string len (plus space) - SETCURSOR(0, y); // simulate carriage return + auto _newline = [&col, &row]() { + col = 0; row++; // Move col to string len (plus space) + SETCURSOR(0, row); // Simulate carriage return }; uint8_t *p = (uint8_t*)string; @@ -227,9 +236,9 @@ millis_t next_button_update_ms; if (eol || ch == ' ' || ch == '-' || ch == '+' || ch == '.') { if (!c && ch == ' ') { if (wrd) wrd++; continue; } // collapse extra spaces // Past the right and the word is not too long? - if (x + c > LCD_WIDTH && x >= (LCD_WIDTH) / 4) _newline(); // should it wrap? + if (col + c > LCD_WIDTH && col >= (LCD_WIDTH) / 4) _newline(); // should it wrap? c += !eol; // +1 so the space will be printed - x += c; // advance x to new position + col += c; // advance col to new position while (c) { // character countdown --c; // count down to zero wrd = get_utf8_value_cb(wrd, cb_read_byte, &ch); // get characters again @@ -246,25 +255,25 @@ millis_t next_button_update_ms; p = get_utf8_value_cb(p, cb_read_byte, &ch); if (!ch) break; lcd_put_wchar(ch); - x++; - if (x >= LCD_WIDTH) _newline(); + col++; + if (col >= LCD_WIDTH) _newline(); } } } void MarlinUI::draw_select_screen_prompt(PGM_P const pref, const char * const string/*=nullptr*/, PGM_P const suff/*=nullptr*/) { const uint8_t plen = utf8_strlen_P(pref), slen = suff ? utf8_strlen_P(suff) : 0; - uint8_t x = 0, y = 0; + uint8_t row = 0, col = 0; if (!string && plen + slen <= LCD_WIDTH) { - x = (LCD_WIDTH - plen - slen) / 2; - y = LCD_HEIGHT > 3 ? 1 : 0; + row = (LCD_WIDTH - plen - slen) / 2; + col = LCD_HEIGHT > 3 ? 1 : 0; } - wrap_string_P(x, y, pref, true); + wrap_string_P(row, col, pref, true); if (string) { - if (x) { x = 0; y++; } // Move to the start of the next line - wrap_string(x, y, string); + if (row) { row = 0; col++; } // Move to the start of the next line + wrap_string(row, col, string); } - if (suff) wrap_string_P(x, y, suff); + if (suff) wrap_string_P(row, col, suff); } #endif // HAS_LCD_MENU @@ -568,7 +577,7 @@ void MarlinUI::status_screen() { const millis_t ms = millis(); #endif if (ELAPSED(ms, next_beep)) { - BUZZ(FEEDRATE_CHANGE_BEEP_DURATION, FEEDRATE_CHANGE_BEEP_FREQUENCY); + buzz(FEEDRATE_CHANGE_BEEP_DURATION, FEEDRATE_CHANGE_BEEP_FREQUENCY); next_beep = ms + 500UL; } #endif @@ -611,13 +620,12 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) { #if HAS_BUZZER // Buzz and wait. Is the delay needed for buttons to settle? buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ); - #endif - - #if HAS_LCD_MENU - #if ENABLED(LCD_USE_I2C_BUZZER) - delay(10); - #elif PIN_EXISTS(BEEPER) - for (int8_t i = 5; i--;) { buzzer.tick(); delay(2); } + #if HAS_LCD_MENU + #if USE_BEEPER + for (int8_t i = 5; i--;) { buzzer.tick(); delay(2); } + #else + delay(10); + #endif #endif #endif } @@ -729,16 +737,6 @@ void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) { LCDViewAction MarlinUI::lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; -bool MarlinUI::detected() { - return - #if EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008) && defined(DETECT_DEVICE) - lcd.LcdDetected() == 1 - #else - true - #endif - ; -} - void MarlinUI::update() { static uint16_t max_display_update_time = 0; @@ -764,42 +762,41 @@ void MarlinUI::update() { // If the action button is pressed... static bool wait_for_unclick; // = 0 - if (touch_buttons) { - if (buttons & EN_C) { - if (!wait_for_unclick) { // If not waiting for a debounce release: + #if ENABLED(TOUCH_BUTTONS) + if (touch_buttons) { + if (!wait_for_unclick && (buttons & EN_C)) { // If not waiting for a debounce release: wait_for_unclick = true; // - Set debounce flag to ignore continous clicks lcd_clicked = !wait_for_user && !no_reentry; // - Keep the click if not waiting for a user-click wait_for_user = false; // - Any click clears wait for user quick_feedback(); // - Always make a click sound } - } - else if (buttons & (EN_A | EN_B)) { // Ignore the encoder if clicked, to prevent "slippage" - const millis_t ms = millis(); - if (ELAPSED(ms, next_button_update_ms)) { - next_button_update_ms = ms + 50; - encoderDiff = (ENCODER_STEPS_PER_MENU_ITEM) * (ENCODER_PULSES_PER_STEP); - if (buttons & EN_A) encoderDiff *= -1; - if (!wait_for_unclick) { - next_button_update_ms += 250; - #if HAS_BUZZER - buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ); - #endif - wait_for_unclick = true; // - Set debounce flag to ignore continous clicks + else if (buttons & (EN_A | EN_B)) { // Ignore the encoder if clicked, to prevent "slippage" + const millis_t ms = millis(); + if (ELAPSED(ms, next_button_update_ms)) { + next_button_update_ms = ms + 50; + encoderDiff = (ENCODER_STEPS_PER_MENU_ITEM) * (ENCODER_PULSES_PER_STEP); + if (buttons & EN_A) encoderDiff *= -1; + if (!wait_for_unclick) { + next_button_update_ms += 250; + #if HAS_BUZZER + buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ); + #endif + wait_for_unclick = true; // - Set debounce flag to ignore continous clicks + } } } } - } - else { - // - // Integrated LCD click handling via button_pressed() - // - if (!external_control && button_pressed()) { - if (!wait_for_unclick) { // If not waiting for a debounce release: - wait_for_unclick = true; // - Set debounce flag to ignore continous clicks - lcd_clicked = !wait_for_user && !no_reentry; // - Keep the click if not waiting for a user-click - wait_for_user = false; // - Any click clears wait for user - quick_feedback(); // - Always make a click sound - } + else + #endif //TOUCH_BUTTONS + // + // Integrated LCD click handling via button_pressed() + // + if (!external_control && button_pressed()) { + if (!wait_for_unclick) { // If not waiting for a debounce release: + wait_for_unclick = true; // - Set debounce flag to ignore continous clicks + lcd_clicked = !wait_for_user && !no_reentry; // - Keep the click if not waiting for a user-click + wait_for_user = false; // - Any click clears wait for user + quick_feedback(); // - Always make a click sound } } else wait_for_unclick = false; @@ -829,13 +826,13 @@ void MarlinUI::update() { if (old_sd_status == 2) card.beginautostart(); // Initial boot else - set_status_P(PSTR(MSG_SD_INSERTED)); + set_status_P(PSTR(MSG_MEDIA_INSERTED)); } #if PIN_EXISTS(SD_DETECT) else { card.release(); if (old_sd_status != 2) { - set_status_P(PSTR(MSG_SD_REMOVED)); + set_status_P(PSTR(MSG_MEDIA_REMOVED)); #if HAS_LCD_MENU return_to_status(); #endif @@ -968,7 +965,7 @@ void MarlinUI::update() { #if HAS_LCD_MENU && ENABLED(SCROLL_LONG_FILENAMES) // If scrolling of long file names is enabled and we are in the sd card menu, // cause a refresh to occur until all the text has scrolled into view. - if (currentScreen == menu_sdcard && !lcd_status_update_delay--) { + if (currentScreen == menu_media && !lcd_status_update_delay--) { lcd_status_update_delay = 4; if (++filename_scroll_pos > filename_scroll_max) { filename_scroll_pos = 0; @@ -1296,23 +1293,6 @@ void MarlinUI::update() { #endif // HAS_ENCODER_WHEEL } - #if HAS_SLOW_BUTTONS - - uint8_t MarlinUI::read_slow_buttons() { - #if ENABLED(LCD_I2C_TYPE_MCP23017) - // Reading these buttons this is likely to be too slow to call inside interrupt context - // so they are called during normal lcd_update - uint8_t slow_bits = lcd.readButtons() << B_I2C_BTN_OFFSET; - #if ENABLED(LCD_I2C_VIKI) - if ((slow_bits & (B_MI | B_RI)) && PENDING(millis(), next_button_update_ms)) // LCD clicked - slow_bits &= ~(B_MI | B_RI); // Disable LCD clicked buttons if screen is updated - #endif // LCD_I2C_VIKI - return slow_bits; - #endif // LCD_I2C_TYPE_MCP23017 - } - - #endif - #endif // HAS_ENCODER_ACTION #endif // HAS_SPI_LCD diff --git a/Marlin/src/lcd/ultralcd.h b/Marlin/src/lcd/ultralcd.h index 60a111d1c..565ff2f79 100644 --- a/Marlin/src/lcd/ultralcd.h +++ b/Marlin/src/lcd/ultralcd.h @@ -76,11 +76,11 @@ #define LCDWRITE(c) lcd_put_wchar(c) #endif - #include "fontutils.h" + #include "lcdprint.h" - void _wrap_string(uint8_t &x, uint8_t &y, const char * const string, read_byte_cb_t cb_read_byte, const bool wordwrap=false); - inline void wrap_string_P(uint8_t &x, uint8_t &y, PGM_P const pstr, const bool wordwrap=false) { _wrap_string(x, y, pstr, read_byte_rom, wordwrap); } - inline void wrap_string(uint8_t &x, uint8_t &y, const char * const string, const bool wordwrap=false) { _wrap_string(x, y, string, read_byte_ram, wordwrap); } + void _wrap_string(uint8_t &col, uint8_t &row, const char * const string, read_byte_cb_t cb_read_byte, const bool wordwrap=false); + inline void wrap_string_P(uint8_t &col, uint8_t &row, PGM_P const pstr, const bool wordwrap=false) { _wrap_string(col, row, pstr, read_byte_rom, wordwrap); } + inline void wrap_string(uint8_t &col, uint8_t &row, const char * const string, const bool wordwrap=false) { _wrap_string(col, row, string, read_byte_ram, wordwrap); } #if ENABLED(SDSUPPORT) #include "../sd/cardreader.h" @@ -259,15 +259,11 @@ public: } #if HAS_BUZZER - static inline void buzz(const long duration, const uint16_t freq) { - #if ENABLED(LCD_USE_I2C_BUZZER) - lcd.buzz(duration, freq); - #elif PIN_EXISTS(BEEPER) - buzzer.tone(duration, freq); - #elif ENABLED(PCA9632_BUZZER) - pca9632_buzz(duration, freq); - #endif - } + static void buzz(const long duration, const uint16_t freq); + #endif + + #if ENABLED(LCD_HAS_STATUS_INDICATORS) + static void update_indicators(); #endif // LCD implementations @@ -451,7 +447,12 @@ public: static screenFunc_t currentScreen; static void goto_screen(const screenFunc_t screen, const uint16_t encoder=0, const uint8_t top=0, const uint8_t items=0); static void save_previous_screen(); - static void goto_previous_screen(); + static void goto_previous_screen( + #if ENABLED(TURBO_BACK_MENU_ITEM) + const bool is_back=false + #endif + ); + static void return_to_status(); static inline bool on_status_screen() { return currentScreen == status_screen; } static inline void run_current_screen() { (*currentScreen)(); } @@ -486,7 +487,7 @@ public: #endif #if ENABLED(AUTO_BED_LEVELING_UBL) - static void ubl_plot(const uint8_t x, const uint8_t inverted_y); + static void ubl_plot(const uint8_t x_plot, const uint8_t y_plot); #endif static void draw_select_screen_prompt(PGM_P const pref, const char * const string=nullptr, PGM_P const suff=nullptr); diff --git a/Marlin/src/libs/L6470/L6470_Marlin.h b/Marlin/src/libs/L6470/L6470_Marlin.h index 92745b6e3..3311574a1 100644 --- a/Marlin/src/libs/L6470/L6470_Marlin.h +++ b/Marlin/src/libs/L6470/L6470_Marlin.h @@ -32,8 +32,6 @@ #define L6470_ERROR_MASK (STATUS_UVLO | STATUS_TH_WRN | STATUS_TH_SD | STATUS_OCD | STATUS_STEP_LOSS_A | STATUS_STEP_LOSS_B) #define dSPIN_STEP_CLOCK_FWD dSPIN_STEP_CLOCK #define dSPIN_STEP_CLOCK_REV dSPIN_STEP_CLOCK+1 -#define HAS_L6470_EXTRUDER ( AXIS_DRIVER_TYPE_E0(L6470) || AXIS_DRIVER_TYPE_E1(L6470) || AXIS_DRIVER_TYPE_E2(L6470) \ - || AXIS_DRIVER_TYPE_E3(L6470) || AXIS_DRIVER_TYPE_E4(L6470) || AXIS_DRIVER_TYPE_E5(L6470) ) class L6470_Marlin { public: diff --git a/Marlin/src/libs/buzzer.cpp b/Marlin/src/libs/buzzer.cpp index aa20127fa..549c76008 100644 --- a/Marlin/src/libs/buzzer.cpp +++ b/Marlin/src/libs/buzzer.cpp @@ -22,7 +22,7 @@ #include "../inc/MarlinConfig.h" -#if DISABLED(LCD_USE_I2C_BUZZER) && PIN_EXISTS(BEEPER) +#if USE_BEEPER #include "buzzer.h" #include "../module/temperature.h" @@ -78,4 +78,4 @@ void Buzzer::tick() { else if (ELAPSED(now, state.endtime)) reset(); } -#endif // !LCD_USE_I2C_BUZZER && BEEPER +#endif // USE_BEEPER diff --git a/Marlin/src/libs/buzzer.h b/Marlin/src/libs/buzzer.h index 1908b6aea..026b9330f 100644 --- a/Marlin/src/libs/buzzer.h +++ b/Marlin/src/libs/buzzer.h @@ -23,16 +23,7 @@ #include "../inc/MarlinConfig.h" -#if ENABLED(LCD_USE_I2C_BUZZER) - - #define BUZZ(d,f) ui.buzz(d,f) - -#elif ENABLED(PCA9632_BUZZER) - - #include "../feature/leds/pca9632.h" - #define BUZZ(d, f) pca9632_buzz(d,f) - -#elif PIN_EXISTS(BEEPER) +#if USE_BEEPER #include "circularqueue.h" @@ -120,10 +111,18 @@ // Provide a buzzer instance extern Buzzer buzzer; + + // Buzz directly via the BEEPER pin tone queue #define BUZZ(d,f) buzzer.tone(d, f) -#else // No buzz capability +#elif HAS_BUZZER + + // Buzz indirectly via the MarlinUI instance + #define BUZZ(d,f) ui.buzz(d,f) + +#else + // No buzz capability #define BUZZ(d,f) NOOP #endif diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index da3a52035..15c092269 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -447,36 +447,19 @@ void MarlinSettings::postprocess() { #if ENABLED(EEPROM_SETTINGS) - #define WORD_PADDED_EEPROM ENABLED(__STM32F1__, FLASH_EEPROM_EMULATION) - - #if WORD_PADDED_EEPROM && ENABLED(DEBUG_EEPROM_READWRITE) - #define UPDATE_TEST_INDEX(VAR) (test_index += sizeof(VAR)) - #else - #define UPDATE_TEST_INDEX(VAR) NOOP - #endif - #if WORD_PADDED_EEPROM - #define EEPROM_SKIP(VAR) do{ eeprom_index += sizeof(VAR) + (sizeof(VAR) & 1); UPDATE_TEST_INDEX(sizeof(VAR)); }while(0) - #else - #define EEPROM_SKIP(VAR) (eeprom_index += sizeof(VAR)) - #endif - #define EEPROM_START() if (!persistentStore.access_start()) { SERIAL_ECHO_MSG("No EEPROM."); return false; } \ int eeprom_index = EEPROM_OFFSET #define EEPROM_FINISH() persistentStore.access_finish() - #define EEPROM_WRITE(VAR) do{ persistentStore.write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc); UPDATE_TEST_INDEX(VAR); }while(0) - #define EEPROM_READ(VAR) do{ persistentStore.read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc, !validating); UPDATE_TEST_INDEX(VAR); }while(0) - #define EEPROM_READ_ALWAYS(VAR) do{ persistentStore.read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc); UPDATE_TEST_INDEX(VAR); }while(0) + #define EEPROM_SKIP(VAR) (eeprom_index += sizeof(VAR)) + #define EEPROM_WRITE(VAR) do{ persistentStore.write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc); }while(0) + #define EEPROM_READ(VAR) do{ persistentStore.read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc, !validating); }while(0) + #define EEPROM_READ_ALWAYS(VAR) do{ persistentStore.read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc); }while(0) #define EEPROM_ASSERT(TST,ERR) do{ if (!(TST)) { SERIAL_ERROR_MSG(ERR); eeprom_error = true; } }while(0) #if ENABLED(DEBUG_EEPROM_READWRITE) - #if WORD_PADDED_EEPROM - int test_index; - #else - #define test_index eeprom_index - #endif #define _FIELD_TEST(FIELD) \ EEPROM_ASSERT( \ - eeprom_error || test_index == offsetof(SettingsData, FIELD) + EEPROM_OFFSET, \ + eeprom_error || eeprom_index == offsetof(SettingsData, FIELD) + EEPROM_OFFSET, \ "Field " STRINGIFY(FIELD) " mismatch." \ ) #else @@ -845,8 +828,10 @@ void MarlinSettings::postprocess() { const int16_t lcd_contrast = #if HAS_LCD_CONTRAST ui.contrast + #elif defined(DEFAULT_LCD_CONTRAST) + DEFAULT_LCD_CONTRAST #else - 32 + 127 #endif ; EEPROM_WRITE(lcd_contrast); @@ -2815,12 +2800,6 @@ void MarlinSettings::reset() { } #endif - #if HAS_FILAMENT_SENSOR - CONFIG_ECHO_HEADING("Filament Runout Sensor:"); - CONFIG_ECHO_START(); - SERIAL_ECHOLNPAIR(" M412 S", int(runout.enabled)); - #endif - /** * Bed Leveling */ diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp index 85d9362ef..a31f1c08e 100644 --- a/Marlin/src/module/motion.cpp +++ b/Marlin/src/module/motion.cpp @@ -1663,7 +1663,7 @@ void homeaxis(const AxisEnum axis) { ]; if (backoff_mm) { current_position[axis] -= ABS(backoff_mm) * axis_home_dir; - line_to_current_position(); + line_to_current_position(Z_PROBE_SPEED_FAST); } #endif diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index b8bc07069..56695f3a9 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -2037,6 +2037,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); block_buffer_runtime_us += segment_time_us; + block->segment_time_us = segment_time_us; if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); #endif diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index 9df482057..38884cffa 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -155,7 +155,9 @@ typedef struct block_t { uint8_t valve_pressure, e_to_p_pressure; #endif - uint32_t segment_time_us; + #if HAS_SPI_LCD + uint32_t segment_time_us; + #endif } block_t; diff --git a/Marlin/src/module/printcounter.cpp b/Marlin/src/module/printcounter.cpp index 25e8a767a..ba308142e 100644 --- a/Marlin/src/module/printcounter.cpp +++ b/Marlin/src/module/printcounter.cpp @@ -157,6 +157,8 @@ void PrintCounter::loadStats() { #endif #if HAS_BUZZER && SERVICE_WARNING_BUZZES > 0 if (doBuzz) for (int i = 0; i < SERVICE_WARNING_BUZZES; i++) BUZZ(200, 404); + #else + UNUSED(doBuzz); #endif #endif // HAS_SERVICE_INTERVALS } diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index 91b699aa0..4f63cdd45 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -79,6 +79,10 @@ float zprobe_zoffset; // Initialized by settings.load() #include "stepper_indirection.h" #endif +#if ENABLED(EXTENSIBLE_UI) + #include "../lcd/extensible_ui/ui_api.h" +#endif + #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE) #include "../core/debug_out.h" @@ -114,6 +118,7 @@ float zprobe_zoffset; // Initialized by settings.load() #endif #if ENABLED(TOUCH_MI_MANUAL_DEPLOY) + const screenFunc_t prev_screen = ui.currentScreen; LCD_MESSAGEPGM(MSG_MANUAL_DEPLOY_TOUCHMI); ui.return_to_status(); @@ -126,10 +131,11 @@ float zprobe_zoffset; // Initialized by settings.load() while (wait_for_user) idle(); ui.reset_status(); ui.goto_screen(prev_screen); - #else - #ifdef TOUCH_MI_DEPLOY_XPOS - do_blocking_move_to_x(TOUCH_MI_DEPLOY_XPOS); - #endif + + #elif defined(TOUCH_MI_DEPLOY_XPOS) + + do_blocking_move_to_x(TOUCH_MI_DEPLOY_XPOS); + #endif } @@ -371,6 +377,9 @@ FORCE_INLINE void probe_specific_action(const bool deploy) { #if ENABLED(HOST_PROMPT_SUPPORT) host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Stow Probe"), PSTR("Continue")); #endif + #if ENABLED(EXTENSIBLE_UI) + ExtUI::onStatusChanged(PSTR("Stow Probe")); + #endif while (wait_for_user) idle(); ui.reset_status(); diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp index 3d2c34e6d..862c60877 100644 --- a/Marlin/src/module/stepper.cpp +++ b/Marlin/src/module/stepper.cpp @@ -2316,7 +2316,7 @@ void Stepper::report_positions() { #define EXTRA_CYCLES_BABYSTEP (STEP_PULSE_CYCLES - (CYCLES_EATEN_BABYSTEP)) #define _ENABLE(AXIS) enable_## AXIS() - #define _READ_DIR(AXIS) AXIS ##_DIR_READ + #define _READ_DIR(AXIS) AXIS ##_DIR_READ() #define _INVERT_DIR(AXIS) INVERT_## AXIS ##_DIR #define _APPLY_DIR(AXIS, INVERT) AXIS ##_APPLY_DIR(INVERT, true) @@ -2404,9 +2404,9 @@ void Stepper::report_positions() { enable_Y(); enable_Z(); - const uint8_t old_x_dir_pin = X_DIR_READ, - old_y_dir_pin = Y_DIR_READ, - old_z_dir_pin = Z_DIR_READ; + const uint8_t old_x_dir_pin = X_DIR_READ(), + old_y_dir_pin = Y_DIR_READ(), + old_z_dir_pin = Z_DIR_READ(); X_DIR_WRITE(INVERT_X_DIR ^ z_direction); Y_DIR_WRITE(INVERT_Y_DIR ^ z_direction); diff --git a/Marlin/src/module/stepper_indirection.h b/Marlin/src/module/stepper_indirection.h index b0688a9a0..4651b707c 100644 --- a/Marlin/src/module/stepper_indirection.h +++ b/Marlin/src/module/stepper_indirection.h @@ -90,10 +90,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperX; #define X_ENABLE_INIT NOOP #define X_ENABLE_WRITE(STATE) NOOP - #define X_ENABLE_READ (stepperX.getStatus() & STATUS_HIZ) + #define X_ENABLE_READ() (stepperX.getStatus() & STATUS_HIZ) #define X_DIR_INIT NOOP #define X_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,X) - #define X_DIR_READ (stepperX.getStatus() & STATUS_DIR) + #define X_DIR_READ() (stepperX.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(X) extern TMC_CLASS(X, X) stepperX; @@ -102,23 +102,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperX; #define X_ENABLE_INIT NOOP #define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE) - #define X_ENABLE_READ stepperX.isEnabled() + #define X_ENABLE_READ() stepperX.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(X) #define X_ENABLE_INIT NOOP #define X_ENABLE_WRITE(STATE) stepperX.toff((STATE)==X_ENABLE_ON ? chopper_timing.toff : 0) - #define X_ENABLE_READ stepperX.isEnabled() + #define X_ENABLE_READ() stepperX.isEnabled() #else #define X_ENABLE_INIT SET_OUTPUT(X_ENABLE_PIN) #define X_ENABLE_WRITE(STATE) WRITE(X_ENABLE_PIN,STATE) - #define X_ENABLE_READ READ(X_ENABLE_PIN) + #define X_ENABLE_READ() READ(X_ENABLE_PIN) #endif #define X_DIR_INIT SET_OUTPUT(X_DIR_PIN) #define X_DIR_WRITE(STATE) WRITE(X_DIR_PIN,STATE) - #define X_DIR_READ READ(X_DIR_PIN) + #define X_DIR_READ() READ(X_DIR_PIN) #endif #define X_STEP_INIT SET_OUTPUT(X_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(X) - #define X_STEP_WRITE(STATE) do { if(STATE) TOGGLE(X_STEP_PIN); } while(0) + #define X_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(X_STEP_PIN); }while(0) #else #define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE) #endif @@ -129,10 +129,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperY; #define Y_ENABLE_INIT NOOP #define Y_ENABLE_WRITE(STATE) NOOP - #define Y_ENABLE_READ (stepperY.getStatus() & STATUS_HIZ) + #define Y_ENABLE_READ() (stepperY.getStatus() & STATUS_HIZ) #define Y_DIR_INIT NOOP #define Y_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,Y) - #define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR) + #define Y_DIR_READ() (stepperY.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(Y) extern TMC_CLASS(Y, Y) stepperY; @@ -141,23 +141,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperY; #define Y_ENABLE_INIT NOOP #define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE) - #define Y_ENABLE_READ stepperY.isEnabled() + #define Y_ENABLE_READ() stepperY.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y) #define Y_ENABLE_INIT NOOP #define Y_ENABLE_WRITE(STATE) stepperY.toff((STATE)==Y_ENABLE_ON ? chopper_timing.toff : 0) - #define Y_ENABLE_READ stepperY.isEnabled() + #define Y_ENABLE_READ() stepperY.isEnabled() #else #define Y_ENABLE_INIT SET_OUTPUT(Y_ENABLE_PIN) #define Y_ENABLE_WRITE(STATE) WRITE(Y_ENABLE_PIN,STATE) - #define Y_ENABLE_READ READ(Y_ENABLE_PIN) + #define Y_ENABLE_READ() READ(Y_ENABLE_PIN) #endif #define Y_DIR_INIT SET_OUTPUT(Y_DIR_PIN) #define Y_DIR_WRITE(STATE) WRITE(Y_DIR_PIN,STATE) - #define Y_DIR_READ READ(Y_DIR_PIN) + #define Y_DIR_READ() READ(Y_DIR_PIN) #endif #define Y_STEP_INIT SET_OUTPUT(Y_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(Y) - #define Y_STEP_WRITE(STATE) do { if (STATE) TOGGLE(Y_STEP_PIN); } while(0) + #define Y_STEP_WRITE(STATE) do{ if (STATE) TOGGLE(Y_STEP_PIN); }while(0) #else #define Y_STEP_WRITE(STATE) WRITE(Y_STEP_PIN,STATE) #endif @@ -168,10 +168,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperZ; #define Z_ENABLE_INIT NOOP #define Z_ENABLE_WRITE(STATE) NOOP - #define Z_ENABLE_READ (stepperZ.getStatus() & STATUS_HIZ) + #define Z_ENABLE_READ() (stepperZ.getStatus() & STATUS_HIZ) #define Z_DIR_INIT NOOP #define Z_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,Z) - #define Z_DIR_READ (stepperZ.getStatus() & STATUS_DIR) + #define Z_DIR_READ() (stepperZ.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(Z) extern TMC_CLASS(Z, Z) stepperZ; @@ -180,23 +180,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperZ; #define Z_ENABLE_INIT NOOP #define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE) - #define Z_ENABLE_READ stepperZ.isEnabled() + #define Z_ENABLE_READ() stepperZ.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z) #define Z_ENABLE_INIT NOOP #define Z_ENABLE_WRITE(STATE) stepperZ.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0) - #define Z_ENABLE_READ stepperZ.isEnabled() + #define Z_ENABLE_READ() stepperZ.isEnabled() #else #define Z_ENABLE_INIT SET_OUTPUT(Z_ENABLE_PIN) #define Z_ENABLE_WRITE(STATE) WRITE(Z_ENABLE_PIN,STATE) - #define Z_ENABLE_READ READ(Z_ENABLE_PIN) + #define Z_ENABLE_READ() READ(Z_ENABLE_PIN) #endif #define Z_DIR_INIT SET_OUTPUT(Z_DIR_PIN) #define Z_DIR_WRITE(STATE) WRITE(Z_DIR_PIN,STATE) - #define Z_DIR_READ READ(Z_DIR_PIN) + #define Z_DIR_READ() READ(Z_DIR_PIN) #endif #define Z_STEP_INIT SET_OUTPUT(Z_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(Z) - #define Z_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z_STEP_PIN); } while(0) + #define Z_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Z_STEP_PIN); }while(0) #else #define Z_STEP_WRITE(STATE) WRITE(Z_STEP_PIN,STATE) #endif @@ -208,10 +208,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperX2; #define X2_ENABLE_INIT NOOP #define X2_ENABLE_WRITE(STATE) NOOP - #define X2_ENABLE_READ (stepperX2.getStatus() & STATUS_HIZ) + #define X2_ENABLE_READ() (stepperX2.getStatus() & STATUS_HIZ) #define X2_DIR_INIT NOOP #define X2_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,X2) - #define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR) + #define X2_DIR_READ() (stepperX2.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(X2) extern TMC_CLASS(X2, X) stepperX2; @@ -220,23 +220,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperX2; #define X2_ENABLE_INIT NOOP #define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE) - #define X2_ENABLE_READ stepperX2.isEnabled() + #define X2_ENABLE_READ() stepperX2.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(X2) #define X2_ENABLE_INIT NOOP #define X2_ENABLE_WRITE(STATE) stepperX2.toff((STATE)==X_ENABLE_ON ? chopper_timing.toff : 0) - #define X2_ENABLE_READ stepperX2.isEnabled() + #define X2_ENABLE_READ() stepperX2.isEnabled() #else #define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN) #define X2_ENABLE_WRITE(STATE) WRITE(X2_ENABLE_PIN,STATE) - #define X2_ENABLE_READ READ(X2_ENABLE_PIN) + #define X2_ENABLE_READ() READ(X2_ENABLE_PIN) #endif #define X2_DIR_INIT SET_OUTPUT(X2_DIR_PIN) #define X2_DIR_WRITE(STATE) WRITE(X2_DIR_PIN,STATE) - #define X2_DIR_READ READ(X2_DIR_PIN) + #define X2_DIR_READ() READ(X2_DIR_PIN) #endif #define X2_STEP_INIT SET_OUTPUT(X2_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(X2) - #define X2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(X2_STEP_PIN); } while(0) + #define X2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(X2_STEP_PIN); }while(0) #else #define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE) #endif @@ -250,10 +250,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperY2; #define Y2_ENABLE_INIT NOOP #define Y2_ENABLE_WRITE(STATE) NOOP - #define Y2_ENABLE_READ (stepperY2.getStatus() & STATUS_HIZ) + #define Y2_ENABLE_READ() (stepperY2.getStatus() & STATUS_HIZ) #define Y2_DIR_INIT NOOP #define Y2_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,Y2) - #define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR) + #define Y2_DIR_READ() (stepperY2.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(Y2) extern TMC_CLASS(Y2, Y) stepperY2; @@ -262,23 +262,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperY2; #define Y2_ENABLE_INIT NOOP #define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE) - #define Y2_ENABLE_READ stepperY2.isEnabled() + #define Y2_ENABLE_READ() stepperY2.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y2) #define Y2_ENABLE_INIT NOOP #define Y2_ENABLE_WRITE(STATE) stepperY2.toff((STATE)==Y_ENABLE_ON ? chopper_timing.toff : 0) - #define Y2_ENABLE_READ stepperY2.isEnabled() + #define Y2_ENABLE_READ() stepperY2.isEnabled() #else #define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN) #define Y2_ENABLE_WRITE(STATE) WRITE(Y2_ENABLE_PIN,STATE) - #define Y2_ENABLE_READ READ(Y2_ENABLE_PIN) + #define Y2_ENABLE_READ() READ(Y2_ENABLE_PIN) #endif #define Y2_DIR_INIT SET_OUTPUT(Y2_DIR_PIN) #define Y2_DIR_WRITE(STATE) WRITE(Y2_DIR_PIN,STATE) - #define Y2_DIR_READ READ(Y2_DIR_PIN) + #define Y2_DIR_READ() READ(Y2_DIR_PIN) #endif #define Y2_STEP_INIT SET_OUTPUT(Y2_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(Y2) - #define Y2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Y2_STEP_PIN); } while(0) + #define Y2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Y2_STEP_PIN); }while(0) #else #define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE) #endif @@ -294,10 +294,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperZ2; #define Z2_ENABLE_INIT NOOP #define Z2_ENABLE_WRITE(STATE) NOOP - #define Z2_ENABLE_READ (stepperZ2.getStatus() & STATUS_HIZ) + #define Z2_ENABLE_READ() (stepperZ2.getStatus() & STATUS_HIZ) #define Z2_DIR_INIT NOOP #define Z2_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,Z2) - #define Z2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR) + #define Z2_DIR_READ() (stepperZ2.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(Z2) extern TMC_CLASS(Z2, Z) stepperZ2; @@ -306,23 +306,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperZ2; #define Z2_ENABLE_INIT NOOP #define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE) - #define Z2_ENABLE_READ stepperZ2.isEnabled() + #define Z2_ENABLE_READ() stepperZ2.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z2) #define Z2_ENABLE_INIT NOOP #define Z2_ENABLE_WRITE(STATE) stepperZ2.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0) - #define Z2_ENABLE_READ stepperZ2.isEnabled() + #define Z2_ENABLE_READ() stepperZ2.isEnabled() #else #define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN) #define Z2_ENABLE_WRITE(STATE) WRITE(Z2_ENABLE_PIN,STATE) - #define Z2_ENABLE_READ READ(Z2_ENABLE_PIN) + #define Z2_ENABLE_READ() READ(Z2_ENABLE_PIN) #endif #define Z2_DIR_INIT SET_OUTPUT(Z2_DIR_PIN) #define Z2_DIR_WRITE(STATE) WRITE(Z2_DIR_PIN,STATE) - #define Z2_DIR_READ READ(Z2_DIR_PIN) + #define Z2_DIR_READ() READ(Z2_DIR_PIN) #endif #define Z2_STEP_INIT SET_OUTPUT(Z2_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(Z2) - #define Z2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z2_STEP_PIN); } while(0) + #define Z2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Z2_STEP_PIN); }while(0) #else #define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE) #endif @@ -338,10 +338,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperZ3; #define Z3_ENABLE_INIT NOOP #define Z3_ENABLE_WRITE(STATE) NOOP - #define Z3_ENABLE_READ (stepperZ3.getStatus() & STATUS_HIZ) + #define Z3_ENABLE_READ() (stepperZ3.getStatus() & STATUS_HIZ) #define Z3_DIR_INIT NOOP #define Z3_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,Z3) - #define Z3_DIR_READ (stepperZ3.getStatus() & STATUS_DIR) + #define Z3_DIR_READ() (stepperZ3.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(Z3) extern TMC_CLASS(Z3, Z) stepperZ3; @@ -350,23 +350,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperZ3; #define Z3_ENABLE_INIT NOOP #define Z3_ENABLE_WRITE(STATE) stepperZ3.setEnabled(STATE) - #define Z3_ENABLE_READ stepperZ3.isEnabled() + #define Z3_ENABLE_READ() stepperZ3.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z3) #define Z3_ENABLE_INIT NOOP #define Z3_ENABLE_WRITE(STATE) stepperZ3.toff((STATE)==Z_ENABLE_ON ? chopper_timing.toff : 0) - #define Z3_ENABLE_READ stepperZ3.isEnabled() + #define Z3_ENABLE_READ() stepperZ3.isEnabled() #else #define Z3_ENABLE_INIT SET_OUTPUT(Z3_ENABLE_PIN) #define Z3_ENABLE_WRITE(STATE) WRITE(Z3_ENABLE_PIN,STATE) - #define Z3_ENABLE_READ READ(Z3_ENABLE_PIN) + #define Z3_ENABLE_READ() READ(Z3_ENABLE_PIN) #endif #define Z3_DIR_INIT SET_OUTPUT(Z3_DIR_PIN) #define Z3_DIR_WRITE(STATE) WRITE(Z3_DIR_PIN,STATE) - #define Z3_DIR_READ READ(Z3_DIR_PIN) + #define Z3_DIR_READ() READ(Z3_DIR_PIN) #endif #define Z3_STEP_INIT SET_OUTPUT(Z3_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(Z3) - #define Z3_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z3_STEP_PIN); } while(0) + #define Z3_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Z3_STEP_PIN); }while(0) #else #define Z3_STEP_WRITE(STATE) WRITE(Z3_STEP_PIN,STATE) #endif @@ -381,10 +381,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperE0; #define E0_ENABLE_INIT NOOP #define E0_ENABLE_WRITE(STATE) NOOP - #define E0_ENABLE_READ (stepperE0.getStatus() & STATUS_HIZ) + #define E0_ENABLE_READ() (stepperE0.getStatus() & STATUS_HIZ) #define E0_DIR_INIT NOOP #define E0_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E0) - #define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR) + #define E0_DIR_READ() (stepperE0.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(E0) extern TMC_CLASS_E(0) stepperE0; @@ -393,23 +393,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperE0; #define E0_ENABLE_INIT NOOP #define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE) - #define E0_ENABLE_READ stepperE0.isEnabled() + #define E0_ENABLE_READ() stepperE0.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E0) #define E0_ENABLE_INIT NOOP #define E0_ENABLE_WRITE(STATE) stepperE0.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) - #define E0_ENABLE_READ stepperE0.isEnabled() + #define E0_ENABLE_READ() stepperE0.isEnabled() #else #define E0_ENABLE_INIT SET_OUTPUT(E0_ENABLE_PIN) #define E0_ENABLE_WRITE(STATE) WRITE(E0_ENABLE_PIN,STATE) - #define E0_ENABLE_READ READ(E0_ENABLE_PIN) + #define E0_ENABLE_READ() READ(E0_ENABLE_PIN) #endif #define E0_DIR_INIT SET_OUTPUT(E0_DIR_PIN) #define E0_DIR_WRITE(STATE) WRITE(E0_DIR_PIN,STATE) - #define E0_DIR_READ READ(E0_DIR_PIN) + #define E0_DIR_READ() READ(E0_DIR_PIN) #endif #define E0_STEP_INIT SET_OUTPUT(E0_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(E0) - #define E0_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E0_STEP_PIN); } while(0) + #define E0_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E0_STEP_PIN); }while(0) #else #define E0_STEP_WRITE(STATE) WRITE(E0_STEP_PIN,STATE) #endif @@ -420,10 +420,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperE1; #define E1_ENABLE_INIT NOOP #define E1_ENABLE_WRITE(STATE) NOOP - #define E1_ENABLE_READ (stepperE1.getStatus() & STATUS_HIZ) + #define E1_ENABLE_READ() (stepperE1.getStatus() & STATUS_HIZ) #define E1_DIR_INIT NOOP #define E1_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E1) - #define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR) + #define E1_DIR_READ() (stepperE1.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(E1) extern TMC_CLASS_E(1) stepperE1; @@ -432,23 +432,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperE1; #define E1_ENABLE_INIT NOOP #define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE) - #define E1_ENABLE_READ stepperE1.isEnabled() + #define E1_ENABLE_READ() stepperE1.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E1) #define E1_ENABLE_INIT NOOP #define E1_ENABLE_WRITE(STATE) stepperE1.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) - #define E1_ENABLE_READ stepperE1.isEnabled() + #define E1_ENABLE_READ() stepperE1.isEnabled() #else #define E1_ENABLE_INIT SET_OUTPUT(E1_ENABLE_PIN) #define E1_ENABLE_WRITE(STATE) WRITE(E1_ENABLE_PIN,STATE) - #define E1_ENABLE_READ READ(E1_ENABLE_PIN) + #define E1_ENABLE_READ() READ(E1_ENABLE_PIN) #endif #define E1_DIR_INIT SET_OUTPUT(E1_DIR_PIN) #define E1_DIR_WRITE(STATE) WRITE(E1_DIR_PIN,STATE) - #define E1_DIR_READ READ(E1_DIR_PIN) + #define E1_DIR_READ() READ(E1_DIR_PIN) #endif #define E1_STEP_INIT SET_OUTPUT(E1_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(E1) - #define E1_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E1_STEP_PIN); } while(0) + #define E1_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E1_STEP_PIN); }while(0) #else #define E1_STEP_WRITE(STATE) WRITE(E1_STEP_PIN,STATE) #endif @@ -459,10 +459,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperE2; #define E2_ENABLE_INIT NOOP #define E2_ENABLE_WRITE(STATE) NOOP - #define E2_ENABLE_READ (stepperE2.getStatus() & STATUS_HIZ) + #define E2_ENABLE_READ() (stepperE2.getStatus() & STATUS_HIZ) #define E2_DIR_INIT NOOP #define E2_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E2) - #define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR) + #define E2_DIR_READ() (stepperE2.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(E2) extern TMC_CLASS_E(2) stepperE2; @@ -471,23 +471,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperE2; #define E2_ENABLE_INIT NOOP #define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE) - #define E2_ENABLE_READ stepperE2.isEnabled() + #define E2_ENABLE_READ() stepperE2.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E2) #define E2_ENABLE_INIT NOOP #define E2_ENABLE_WRITE(STATE) stepperE2.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) - #define E2_ENABLE_READ stepperE2.isEnabled() + #define E2_ENABLE_READ() stepperE2.isEnabled() #else #define E2_ENABLE_INIT SET_OUTPUT(E2_ENABLE_PIN) #define E2_ENABLE_WRITE(STATE) WRITE(E2_ENABLE_PIN,STATE) - #define E2_ENABLE_READ READ(E2_ENABLE_PIN) + #define E2_ENABLE_READ() READ(E2_ENABLE_PIN) #endif #define E2_DIR_INIT SET_OUTPUT(E2_DIR_PIN) #define E2_DIR_WRITE(STATE) WRITE(E2_DIR_PIN,STATE) - #define E2_DIR_READ READ(E2_DIR_PIN) + #define E2_DIR_READ() READ(E2_DIR_PIN) #endif #define E2_STEP_INIT SET_OUTPUT(E2_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(E2) - #define E2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E2_STEP_PIN); } while(0) + #define E2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E2_STEP_PIN); }while(0) #else #define E2_STEP_WRITE(STATE) WRITE(E2_STEP_PIN,STATE) #endif @@ -498,10 +498,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperE3; #define E3_ENABLE_INIT NOOP #define E3_ENABLE_WRITE(STATE) NOOP - #define E3_ENABLE_READ (stepperE3.getStatus() & STATUS_HIZ) + #define E3_ENABLE_READ() (stepperE3.getStatus() & STATUS_HIZ) #define E3_DIR_INIT NOOP #define E3_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E3) - #define E3_DIR_READ (stepperE3.getStatus() & STATUS_DIR) + #define E3_DIR_READ() (stepperE3.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(E3) extern TMC_CLASS_E(3) stepperE3; @@ -510,23 +510,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperE3; #define E3_ENABLE_INIT NOOP #define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE) - #define E3_ENABLE_READ stepperE3.isEnabled() + #define E3_ENABLE_READ() stepperE3.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E3) #define E3_ENABLE_INIT NOOP #define E3_ENABLE_WRITE(STATE) stepperE3.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) - #define E3_ENABLE_READ stepperE3.isEnabled() + #define E3_ENABLE_READ() stepperE3.isEnabled() #else #define E3_ENABLE_INIT SET_OUTPUT(E3_ENABLE_PIN) #define E3_ENABLE_WRITE(STATE) WRITE(E3_ENABLE_PIN,STATE) - #define E3_ENABLE_READ READ(E3_ENABLE_PIN) + #define E3_ENABLE_READ() READ(E3_ENABLE_PIN) #endif #define E3_DIR_INIT SET_OUTPUT(E3_DIR_PIN) #define E3_DIR_WRITE(STATE) WRITE(E3_DIR_PIN,STATE) - #define E3_DIR_READ READ(E3_DIR_PIN) + #define E3_DIR_READ() READ(E3_DIR_PIN) #endif #define E3_STEP_INIT SET_OUTPUT(E3_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(E3) - #define E3_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E3_STEP_PIN); } while(0) + #define E3_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E3_STEP_PIN); }while(0) #else #define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE) #endif @@ -537,10 +537,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperE4; #define E4_ENABLE_INIT NOOP #define E4_ENABLE_WRITE(STATE) NOOP - #define E4_ENABLE_READ (stepperE4.getStatus() & STATUS_HIZ) + #define E4_ENABLE_READ() (stepperE4.getStatus() & STATUS_HIZ) #define E4_DIR_INIT NOOP #define E4_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E4) - #define E4_DIR_READ (stepperE4.getStatus() & STATUS_DIR) + #define E4_DIR_READ() (stepperE4.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(E4) extern TMC_CLASS_E(4) stepperE4; @@ -549,23 +549,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperE4; #define E4_ENABLE_INIT NOOP #define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE) - #define E4_ENABLE_READ stepperE4.isEnabled() + #define E4_ENABLE_READ() stepperE4.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E4) #define E4_ENABLE_INIT NOOP #define E4_ENABLE_WRITE(STATE) stepperE4.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) - #define E4_ENABLE_READ stepperE4.isEnabled() + #define E4_ENABLE_READ() stepperE4.isEnabled() #else #define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN) #define E4_ENABLE_WRITE(STATE) WRITE(E4_ENABLE_PIN,STATE) - #define E4_ENABLE_READ READ(E4_ENABLE_PIN) + #define E4_ENABLE_READ() READ(E4_ENABLE_PIN) #endif #define E4_DIR_INIT SET_OUTPUT(E4_DIR_PIN) #define E4_DIR_WRITE(STATE) WRITE(E4_DIR_PIN,STATE) - #define E4_DIR_READ READ(E4_DIR_PIN) + #define E4_DIR_READ() READ(E4_DIR_PIN) #endif #define E4_STEP_INIT SET_OUTPUT(E4_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(E4) - #define E4_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E4_STEP_PIN); } while(0) + #define E4_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E4_STEP_PIN); }while(0) #else #define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE) #endif @@ -576,10 +576,10 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern L6470 stepperE5; #define E5_ENABLE_INIT NOOP #define E5_ENABLE_WRITE(STATE) NOOP - #define E5_ENABLE_READ (stepperE5.getStatus() & STATUS_HIZ) + #define E5_ENABLE_READ() (stepperE5.getStatus() & STATUS_HIZ) #define E5_DIR_INIT NOOP #define E5_DIR_WRITE(STATE) L6470_WRITE_DIR_COMMAND(STATE,E5) - #define E5_DIR_READ (stepperE5.getStatus() & STATUS_DIR) + #define E5_DIR_READ() (stepperE5.getStatus() & STATUS_DIR) #else #if AXIS_IS_TMC(E5) extern TMC_CLASS_E(5) stepperE5; @@ -588,23 +588,23 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset extern TMC26XStepper stepperE5; #define E5_ENABLE_INIT NOOP #define E5_ENABLE_WRITE(STATE) stepperE5.setEnabled(STATE) - #define E5_ENABLE_READ stepperE5.isEnabled() + #define E5_ENABLE_READ() stepperE5.isEnabled() #elif ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E5) #define E5_ENABLE_INIT NOOP #define E5_ENABLE_WRITE(STATE) stepperE5.toff((STATE)==E_ENABLE_ON ? chopper_timing.toff : 0) - #define E5_ENABLE_READ stepperE5.isEnabled() + #define E5_ENABLE_READ() stepperE5.isEnabled() #else #define E5_ENABLE_INIT SET_OUTPUT(E5_ENABLE_PIN) #define E5_ENABLE_WRITE(STATE) WRITE(E5_ENABLE_PIN,STATE) - #define E5_ENABLE_READ READ(E5_ENABLE_PIN) + #define E5_ENABLE_READ() READ(E5_ENABLE_PIN) #endif #define E5_DIR_INIT SET_OUTPUT(E5_DIR_PIN) #define E5_DIR_WRITE(STATE) WRITE(E5_DIR_PIN,STATE) - #define E5_DIR_READ READ(E5_DIR_PIN) + #define E5_DIR_READ() READ(E5_DIR_PIN) #endif #define E5_STEP_INIT SET_OUTPUT(E5_STEP_PIN) #if AXIS_HAS_SQUARE_WAVE(E5) - #define E5_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E5_STEP_PIN); } while(0) + #define E5_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E5_STEP_PIN); }while(0) #else #define E5_STEP_WRITE(STATE) WRITE(E5_STEP_PIN,STATE) #endif @@ -701,7 +701,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); } else _REV_E_DIR(E); }while(0) #endif #else - #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); } while(0) + #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); }while(0) #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); } else _NORM_E_DIR(E); }while(0) #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); } else _REV_E_DIR(E); }while(0) #endif diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 1dd774d1b..04492987b 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -68,7 +68,7 @@ #include "tool_change.h" #endif -#if HAS_BUZZER && PIN_EXISTS(BEEPER) +#if USE_BEEPER #include "../libs/buzzer.h" #endif @@ -654,13 +654,6 @@ int16_t Temperature::getHeaterPower(const heater_ind_t heater_id) { #define AUTO_5_IS_2 (E5_AUTO_FAN_PIN == E2_AUTO_FAN_PIN) #define AUTO_5_IS_3 (E5_AUTO_FAN_PIN == E3_AUTO_FAN_PIN) #define AUTO_5_IS_4 (E5_AUTO_FAN_PIN == E4_AUTO_FAN_PIN) - #define AUTO_CHAMBER_IS_0 (CHAMBER_AUTO_FAN_PIN == E0_AUTO_FAN_PIN) - #define AUTO_CHAMBER_IS_1 (CHAMBER_AUTO_FAN_PIN == E1_AUTO_FAN_PIN) - #define AUTO_CHAMBER_IS_2 (CHAMBER_AUTO_FAN_PIN == E2_AUTO_FAN_PIN) - #define AUTO_CHAMBER_IS_3 (CHAMBER_AUTO_FAN_PIN == E3_AUTO_FAN_PIN) - #define AUTO_CHAMBER_IS_4 (CHAMBER_AUTO_FAN_PIN == E4_AUTO_FAN_PIN) - #define AUTO_CHAMBER_IS_5 (CHAMBER_AUTO_FAN_PIN == E5_AUTO_FAN_PIN) - #define AUTO_CHAMBER_IS_E (AUTO_CHAMBER_IS_0 || AUTO_CHAMBER_IS_1 || AUTO_CHAMBER_IS_2 || AUTO_CHAMBER_IS_3 || AUTO_CHAMBER_IS_4 || AUTO_CHAMBER_IS_5) #define CHAMBER_FAN_INDEX HOTENDS void Temperature::checkExtruderAutoFans() { @@ -709,7 +702,7 @@ int16_t Temperature::getHeaterPower(const heater_ind_t heater_id) { if (TEST(fanDone, realFan)) continue; const bool fan_on = TEST(fanState, realFan); switch (f) { - #if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_E + #if ENABLED(AUTO_POWER_CHAMBER_FAN) case CHAMBER_FAN_INDEX: chamberfan_speed = fan_on ? CHAMBER_AUTO_FAN_SPEED : 0; break; @@ -756,7 +749,7 @@ int16_t Temperature::getHeaterPower(const heater_ind_t heater_id) { inline void loud_kill(PGM_P const lcd_msg) { Running = false; - #if HAS_BUZZER && PIN_EXISTS(BEEPER) + #if USE_BEEPER for (uint8_t i = 20; i--;) { WRITE(BEEPER_PIN, HIGH); delay(25); WRITE(BEEPER_PIN, LOW); delay(80); diff --git a/Marlin/src/module/thermistor/thermistor_331.h b/Marlin/src/module/thermistor/thermistor_331.h new file mode 100644 index 000000000..8f98d0752 --- /dev/null +++ b/Marlin/src/module/thermistor/thermistor_331.h @@ -0,0 +1,92 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define OVM(V) OV((V)*(0.327/0.5)) + +// R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor +const short temptable_331[][2] PROGMEM = { + { OVM( 23), 300 }, + { OVM( 25), 295 }, + { OVM( 27), 290 }, + { OVM( 28), 285 }, + { OVM( 31), 280 }, + { OVM( 33), 275 }, + { OVM( 35), 270 }, + { OVM( 38), 265 }, + { OVM( 41), 260 }, + { OVM( 44), 255 }, + { OVM( 48), 250 }, + { OVM( 52), 245 }, + { OVM( 56), 240 }, + { OVM( 61), 235 }, + { OVM( 66), 230 }, + { OVM( 71), 225 }, + { OVM( 78), 220 }, + { OVM( 84), 215 }, + { OVM( 92), 210 }, + { OVM( 100), 205 }, + { OVM( 109), 200 }, + { OVM( 120), 195 }, + { OVM( 131), 190 }, + { OVM( 143), 185 }, + { OVM( 156), 180 }, + { OVM( 171), 175 }, + { OVM( 187), 170 }, + { OVM( 205), 165 }, + { OVM( 224), 160 }, + { OVM( 245), 155 }, + { OVM( 268), 150 }, + { OVM( 293), 145 }, + { OVM( 320), 140 }, + { OVM( 348), 135 }, + { OVM( 379), 130 }, + { OVM( 411), 125 }, + { OVM( 445), 120 }, + { OVM( 480), 115 }, + { OVM( 516), 110 }, + { OVM( 553), 105 }, + { OVM( 591), 100 }, + { OVM( 628), 95 }, + { OVM( 665), 90 }, + { OVM( 702), 85 }, + { OVM( 737), 80 }, + { OVM( 770), 75 }, + { OVM( 801), 70 }, + { OVM( 830), 65 }, + { OVM( 857), 60 }, + { OVM( 881), 55 }, + { OVM( 903), 50 }, + { OVM( 922), 45 }, + { OVM( 939), 40 }, + { OVM( 954), 35 }, + { OVM( 966), 30 }, + { OVM( 977), 25 }, + { OVM( 985), 20 }, + { OVM( 993), 15 }, + { OVM( 999), 10 }, + { OVM(1004), 5 }, + { OVM(1008), 0 }, + { OVM(1012), -5 }, + { OVM(1016), -10 }, + { OVM(1020), -15 } +}; diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h index f91c2be94..f42f647e8 100644 --- a/Marlin/src/module/thermistor/thermistors.h +++ b/Marlin/src/module/thermistor/thermistors.h @@ -131,6 +131,9 @@ #if ANY_THERMISTOR_IS(201) // Pt100 with LMV324 Overlord #include "thermistor_201.h" #endif +#if ANY_THERMISTOR_IS(331) // Like table 1, but with 3V3 as input voltage + #include "thermistor_331.h" +#endif #if ANY_THERMISTOR_IS(666) // beta25 = UNK, R25 = 200K, Pull-up = 10 kOhm, "Unidentified 200K NTC thermistor (Einstart S)" #include "thermistor_666.h" #endif diff --git a/Marlin/src/pins/esp32/pins_ESP32.h b/Marlin/src/pins/esp32/pins_ESP32.h index 35e8e1ee0..0831746f0 100644 --- a/Marlin/src/pins/esp32/pins_ESP32.h +++ b/Marlin/src/pins/esp32/pins_ESP32.h @@ -29,7 +29,7 @@ "Oops! Select an ESP32 board in 'Tools > Board.'" #endif -#define BOARD_NAME "Espressif ESP32" +#define BOARD_INFO_NAME "Espressif ESP32" // // I2S (steppers & other output-only pins) diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index a726b3842..48cdb1dd6 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -45,8 +45,8 @@ * 7 | 11 */ -#ifndef BOARD_NAME - #define BOARD_NAME "RAMPS 1.4" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RAMPS 1.4" #endif #define E2END 0xFFF // 4KB @@ -437,7 +437,7 @@ #endif #if DISABLED(NEWPANEL) - // Buttons are attached to a shift register + // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 //#define SHIFT_LD 42 diff --git a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h index dddec6b0c..98c0ece3a 100644 --- a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h +++ b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h @@ -29,7 +29,7 @@ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #endif -#define BOARD_NAME "AZSMZ MINI" +#define BOARD_INFO_NAME "AZSMZ MINI" // // Servos diff --git a/Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.1.h b/Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.1.h index d4ead0f4f..36e7b028b 100644 --- a/Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.1.h +++ b/Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.1.h @@ -25,7 +25,7 @@ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #endif -#define BOARD_NAME "BIGTREE SKR 1.1" +#define BOARD_INFO_NAME "BIGTREE SKR 1.1" // // Limit Switches diff --git a/Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.3.h b/Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.3.h index f84eafdf8..6c86056e3 100644 --- a/Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.3.h +++ b/Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.3.h @@ -25,7 +25,7 @@ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #endif -#define BOARD_NAME "BIGTREE SKR 1.3" +#define BOARD_INFO_NAME "BIGTREE SKR 1.3" // Ignore temp readings during development. //#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h index 426a20653..c05904584 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h @@ -34,8 +34,8 @@ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #endif -#ifndef BOARD_NAME - #define BOARD_NAME "BIQU Thunder B300 V1.0" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "BIQU Thunder B300 V1.0" #endif // diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h index 8095d86ab..873d43786 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h @@ -34,7 +34,7 @@ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #endif -#define BOARD_NAME "BIQU BQ111-A4" +#define BOARD_INFO_NAME "BIQU BQ111-A4" // // Limit Switches diff --git a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h index e2a3d6dc1..20385bab4 100644 --- a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h +++ b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h @@ -25,7 +25,7 @@ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #endif -#define BOARD_NAME "GMARSH X6 REV1" +#define BOARD_INFO_NAME "GMARSH X6 REV1" // Ignore temp readings during develpment. //#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h index b3d307d3b..a23101ea6 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h @@ -29,11 +29,11 @@ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #endif -#ifndef BOARD_NAME - #define BOARD_NAME "MKS SBASE" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS SBASE" #endif #ifndef BOARD_WEBSITE_URL - #define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SBASE" + #define BOARD_WEBSITE_URL "github.com/makerbase-mks/MKS-SBASE" #endif #define LED_PIN P1_18 // Used as a status indicator @@ -42,7 +42,7 @@ #define LED4_PIN P1_21 // -// Servo pin +// Servos // #define SERVO0_PIN P1_23 // J8-3 (low jitter) #define SERVO1_PIN P2_12 // J8-4 diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h index 3207309c5..4eead57e7 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -29,11 +29,11 @@ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #endif -#define BOARD_NAME "MKS SGen-L" -#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SGEN_L" +#define BOARD_INFO_NAME "MKS SGen-L" +#define BOARD_WEBSITE_URL "github.com/makerbase-mks/MKS-SGEN_L" // -// Servo pin +// Servos // #define SERVO0_PIN P1_23 // SERVO P1.23 #define SERVO1_PIN P2_00 // SERVO P2.0 diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index 802fc9fe7..8e4bfeb8b 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -40,7 +40,7 @@ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #endif -#define BOARD_NAME "Re-ARM RAMPS 1.4" +#define BOARD_INFO_NAME "Re-ARM RAMPS 1.4" // // Servos @@ -128,17 +128,33 @@ // P2_08 E1-Step // P2_13 E1-Dir - #define X_SERIAL_TX_PIN P2_13 - #define X_SERIAL_RX_PIN P2_13 + #ifndef X_SERIAL_TX_PIN + #define X_SERIAL_TX_PIN P0_01 + #endif + #ifndef X_SERIAL_RX_PIN + #define X_SERIAL_RX_PIN P0_01 + #endif - #define Y_SERIAL_TX_PIN P0_00 - #define Y_SERIAL_RX_PIN P0_00 + #ifndef Y_SERIAL_TX_PIN + #define Y_SERIAL_TX_PIN P0_00 + #endif + #ifndef Y_SERIAL_RX_PIN + #define Y_SERIAL_RX_PIN P0_00 + #endif - #define Z_SERIAL_TX_PIN P0_01 - #define Z_SERIAL_RX_PIN P0_01 + #ifndef Z_SERIAL_TX_PIN + #define Z_SERIAL_TX_PIN P2_13 + #endif + #ifndef Z_SERIAL_RX_PIN + #define Z_SERIAL_RX_PIN P2_13 + #endif - #define E0_SERIAL_TX_PIN P2_08 - #define E0_SERIAL_RX_PIN P2_08 + #ifndef E0_SERIAL_TX_PIN + #define E0_SERIAL_TX_PIN P2_08 + #endif + #ifndef E0_SESIAL_RX_PIN + #define E0_SERIAL_RX_PIN P2_08 + #endif #endif diff --git a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h index 3baa441d9..72e1b8141 100644 --- a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h +++ b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h @@ -29,13 +29,17 @@ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." #endif -#define BOARD_NAME "Selena Compact" -#define BOARD_WEBSITE_URL "https://github.com/Ales2-k/Selena" +#define BOARD_INFO_NAME "Selena Compact" +#define BOARD_WEBSITE_URL "github.com/Ales2-k/Selena" // -// Limit Switches +// Servos // +#define SERVO0_PIN P1_23 +// +// Limit Switches +// #define X_MIN_PIN P1_28 #define X_MAX_PIN P1_25 #define Y_MIN_PIN P2_11 @@ -108,8 +112,3 @@ #define SD_DETECT_PIN -1 #endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// Servo -// -#define SERVO0_PIN P1_23 diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h index fed88b465..57a9686a2 100755 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h @@ -29,19 +29,23 @@ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." #endif -#define BOARD_NAME "Azteeg X5 GT" -#define BOARD_WEBSITE_URL "https://tinyurl.com/yx8tdqa3" +#define BOARD_INFO_NAME "Azteeg X5 GT" +#define BOARD_WEBSITE_URL "tinyurl.com/yx8tdqa3" // -// Set CPU +// Custom CPU Speed 120MHz // #undef F_CPU #define F_CPU 120000000 // -// Limit Switches +// Servos // +#define SERVO0_PIN P1_23 +// +// Limit Switches +// #define X_MIN_PIN P1_24 #define X_MAX_PIN P1_27 #define Y_MIN_PIN P1_25 @@ -128,8 +132,3 @@ #define STAT_LED_RED_PIN P1_19 #define STAT_LED_BLUE_PIN P1_20 #endif - -// -// Servo -// -#define SERVO0_PIN P1_23 diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h index a68548075..b576ed1a3 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h @@ -29,10 +29,10 @@ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." #endif -#ifndef BOARD_NAME - #define BOARD_NAME "Azteeg X5 MINI" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Azteeg X5 MINI" #endif -#define BOARD_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm" +#define BOARD_WEBSITE_URL "tiny.cc/x5_mini" // // LED diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h index 6cbdb335f..6b42cee53 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h @@ -29,7 +29,7 @@ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." #endif -#define BOARD_NAME "Azteeg X5 MINI WIFI" +#define BOARD_INFO_NAME "Azteeg X5 MINI WIFI" // // DIGIPOT slave addresses diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h index 29ad150b2..2422d198c 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h @@ -29,7 +29,7 @@ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." #endif -#define BOARD_NAME "Cohesion3D Mini" +#define BOARD_INFO_NAME "Cohesion3D Mini" // // Servos diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h index 5adec936a..7f29e8dec 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h @@ -29,7 +29,7 @@ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." #endif -#define BOARD_NAME "Cohesion3D ReMix" +#define BOARD_INFO_NAME "Cohesion3D ReMix" // // Servos diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h index bf6359f09..7edb80eca 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h @@ -29,8 +29,8 @@ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." #endif -#define BOARD_NAME "MKS SGen" -#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SGEN" +#define BOARD_INFO_NAME "MKS SGen" +#define BOARD_WEBSITE_URL "github.com/makerbase-mks/MKS-SGEN" #include "../lpc1768/pins_MKS_SBASE.h" diff --git a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h index ace87a8ca..8ddf9a9ee 100644 --- a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h @@ -29,9 +29,12 @@ #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." #endif -#define BOARD_NAME "Smoothieboard" -#define BOARD_WEBSITE_URL "http://smoothieware.org/smoothieboard" +#define BOARD_INFO_NAME "Smoothieboard" +#define BOARD_WEBSITE_URL "smoothieware.org/smoothieboard" +// +// Custom CPU Speed 120MHz +// #undef F_CPU #define F_CPU 120000000 diff --git a/Marlin/src/pins/lpc1768/pins_TH3D_EZBOARD.h b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h old mode 100755 new mode 100644 similarity index 95% rename from Marlin/src/pins/lpc1768/pins_TH3D_EZBOARD.h rename to Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h index 509fdd3ae..c49bf7148 --- a/Marlin/src/pins/lpc1768/pins_TH3D_EZBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h @@ -25,12 +25,12 @@ * TH3D EZBoard pin assignments */ -#ifndef TARGET_LPC1768 - #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#ifndef LPC1769 + #error "Oops! Make sure you have the LPC1769 environment selected in your IDE." #endif -#define BOARD_NAME "TH3D EZBoard" -#define BOARD_WEBSITE_URL "https://www.th3dstudio.com/product/ezboard-lite/" +#define BOARD_INFO_NAME "TH3D EZBoard" +#define BOARD_WEBSITE_URL "th3dstudio.com" // // Servos diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONIC.h b/Marlin/src/pins/mega/pins_CHEAPTRONIC.h index 36cfb3143..e49207a42 100644 --- a/Marlin/src/pins/mega/pins_CHEAPTRONIC.h +++ b/Marlin/src/pins/mega/pins_CHEAPTRONIC.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Cheaptronic v1.0" +#define BOARD_INFO_NAME "Cheaptronic v1.0" // // Limit Switches // diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h index a409f0335..f2df6e1ec 100644 --- a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h +++ b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h @@ -31,7 +31,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Cheaptronic v2.0" +#define BOARD_INFO_NAME "Cheaptronic v2.0" // // Limit Switches diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h index 91bafb9e0..681ce65e3 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h @@ -6,7 +6,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "CN Controls V11" +#define BOARD_INFO_NAME "CN Controls V11" // // Limit Switches diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h index a7fcb1816..585c048e4 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h @@ -6,7 +6,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "CN Controls V12" +#define BOARD_INFO_NAME "CN Controls V12" // // Limit Switches diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h new file mode 100644 index 000000000..6d7325996 --- /dev/null +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h @@ -0,0 +1,86 @@ +/** + * CNControls V15 for HMS434 pin assignments + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" +#endif + +#define BOARD_INFO_NAME "CN Controls V15" + +// +// Servos +// +#define SERVO0_PIN 6 + +// +// Limit Switches +// +#define X_STOP_PIN 34 +#define Y_STOP_PIN 39 +#define Z_STOP_PIN 62 + +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 49 +#endif + +// +// Steppers +// +#define X_STEP_PIN 14 +#define X_DIR_PIN 25 +#define X_ENABLE_PIN 26 + +#define Y_STEP_PIN 11 +#define Y_DIR_PIN 12 +#define Y_ENABLE_PIN 15 + +#define Z_STEP_PIN 24 +#define Z_DIR_PIN 27 +#define Z_ENABLE_PIN 28 + +#define E0_STEP_PIN 64 +#define E0_DIR_PIN 65 +#define E0_ENABLE_PIN 63 + +// +// Temperature Sensors +// Analog Inputs +// +#define TEMP_0_PIN 2 // Analog Input +#define TEMP_BED_PIN 4 // Analog Input +#define TEMP_CHAMBER_PIN 5 // Analog Input + +// +// Heaters +// +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 32 +#define HEATER_CHAMBER_PIN 33 + +// +// Fans +// +#define FAN0_PIN 8 +#define ORIG_E0_AUTO_FAN_PIN 30 +#define ORIG_E1_AUTO_FAN_PIN 30 +#define ORIG_E2_AUTO_FAN_PIN 30 +#define ORIG_E3_AUTO_FAN_PIN 30 +//#define ORIG_CHAMBER_AUTO_FAN_PIN 10 + +// +// Misc. Functions +// +#define SDSS 53 +#define SD_DETECT_PIN 40 + +// Common I/O + +#define FIL_RUNOUT_PIN 9 +//#define FIL_RUNOUT_PIN 29 // encoder sensor +//#define PWM_1_PIN 12 +//#define PWM_2_PIN 13 +//#define SPARE_IO 17 +#define BEEPER_PIN 13 +#define STAT_LED_BLUE_PIN -1 +#define STAT_LED_RED_PIN 10 // 31 diff --git a/Marlin/src/pins/mega/pins_EINSTART-S.h b/Marlin/src/pins/mega/pins_EINSTART-S.h index 78e2fe2c0..fae1d2e94 100755 --- a/Marlin/src/pins/mega/pins_EINSTART-S.h +++ b/Marlin/src/pins/mega/pins_EINSTART-S.h @@ -30,7 +30,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Einstart-S" +#define BOARD_INFO_NAME "Einstart-S" // // Limit Switches diff --git a/Marlin/src/pins/mega/pins_ELEFU_3.h b/Marlin/src/pins/mega/pins_ELEFU_3.h index ae87e8ce7..5b43acab1 100644 --- a/Marlin/src/pins/mega/pins_ELEFU_3.h +++ b/Marlin/src/pins/mega/pins_ELEFU_3.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Elefu Ra v3" +#define BOARD_INFO_NAME "Elefu Ra v3" // // Limit Switches diff --git a/Marlin/src/pins/mega/pins_GT2560_REV_A.h b/Marlin/src/pins/mega/pins_GT2560_REV_A.h index 3bc68cfd4..16bd5688d 100644 --- a/Marlin/src/pins/mega/pins_GT2560_REV_A.h +++ b/Marlin/src/pins/mega/pins_GT2560_REV_A.h @@ -31,8 +31,8 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#ifndef BOARD_NAME - #define BOARD_NAME "GT2560 Rev.A" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "GT2560 Rev.A" #endif #define DEFAULT_MACHINE_NAME "Prusa i3 Pro B" diff --git a/Marlin/src/pins/mega/pins_GT2560_REV_A_PLUS.h b/Marlin/src/pins/mega/pins_GT2560_REV_A_PLUS.h index 8becf9bcf..c5c894810 100644 --- a/Marlin/src/pins/mega/pins_GT2560_REV_A_PLUS.h +++ b/Marlin/src/pins/mega/pins_GT2560_REV_A_PLUS.h @@ -25,7 +25,7 @@ * Geeetech GT2560 Revision A+ board pin assignments */ -#define BOARD_NAME "GT2560 Rev.A+" +#define BOARD_INFO_NAME "GT2560 Rev.A+" #include "pins_GT2560_REV_A.h" diff --git a/Marlin/src/pins/mega/pins_GT2560_V3.h b/Marlin/src/pins/mega/pins_GT2560_V3.h index 10db766da..d84ce5e6b 100644 --- a/Marlin/src/pins/mega/pins_GT2560_V3.h +++ b/Marlin/src/pins/mega/pins_GT2560_V3.h @@ -29,8 +29,8 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#ifndef BOARD_NAME - #define BOARD_NAME "GT2560 V3.0" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "GT2560 V3.0" #endif // diff --git a/Marlin/src/pins/mega/pins_GT2560_V3_MC2.h b/Marlin/src/pins/mega/pins_GT2560_V3_MC2.h index 7abee9cd6..afdcad343 100644 --- a/Marlin/src/pins/mega/pins_GT2560_V3_MC2.h +++ b/Marlin/src/pins/mega/pins_GT2560_V3_MC2.h @@ -25,7 +25,7 @@ * GT2560 V3.0 pin assignment (for Mecreator 2) *****************************************************************/ -#define BOARD_NAME "GT2560 V3.0 (MC2)" +#define BOARD_INFO_NAME "GT2560 V3.0 (MC2)" #define X_MIN_PIN 22 #define X_MAX_PIN 24 diff --git a/Marlin/src/pins/mega/pins_LEAPFROG.h b/Marlin/src/pins/mega/pins_LEAPFROG.h index 8d4f31a70..56eec5e97 100644 --- a/Marlin/src/pins/mega/pins_LEAPFROG.h +++ b/Marlin/src/pins/mega/pins_LEAPFROG.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Leapfrog" +#define BOARD_INFO_NAME "Leapfrog" // // Limit Switches diff --git a/Marlin/src/pins/mega/pins_MEGACONTROLLER.h b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h index 07fd91f73..473e79b27 100644 --- a/Marlin/src/pins/mega/pins_MEGACONTROLLER.h +++ b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h @@ -31,7 +31,7 @@ #error "Mega Controller supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "Mega Controller" +#define BOARD_INFO_NAME "Mega Controller" // // Servos diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS.h b/Marlin/src/pins/mega/pins_MEGATRONICS.h index c0b009392..643375786 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Megatronics" +#define BOARD_INFO_NAME "Megatronics" // // Limit Switches // diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h index 90ddc5cc0..4cd599960 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Megatronics v2.0" +#define BOARD_INFO_NAME "Megatronics v2.0" // // Limit Switches // @@ -115,32 +115,38 @@ #define PS_ON_PIN 12 #define CASE_LIGHT_PIN 2 -// -// LCD / Controller -// -#define BEEPER_PIN 64 - -#define LCD_PINS_RS 14 -#define LCD_PINS_ENABLE 15 -#define LCD_PINS_D4 30 -#define LCD_PINS_D5 31 -#define LCD_PINS_D6 32 -#define LCD_PINS_D7 33 - -// Buttons are directly attached using keypad -#define BTN_EN1 61 -#define BTN_EN2 59 -#define BTN_ENC 43 - -// Buttons that are attached using shift register of reprapworld keypad v1.1 -#define SHIFT_CLK 63 -#define SHIFT_LD 42 -#define SHIFT_OUT 17 -#define SHIFT_EN 17 - // // M3/M4/M5 - Spindle/Laser Control // #define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM #define SPINDLE_LASER_ENA_PIN 16 // Pullup! #define SPINDLE_DIR_PIN 11 + +// +// LCD / Controller +// +#define BEEPER_PIN 64 + +#if HAS_SPI_LCD + + #define LCD_PINS_RS 14 + #define LCD_PINS_ENABLE 15 + #define LCD_PINS_D4 30 + #define LCD_PINS_D5 31 + #define LCD_PINS_D6 32 + #define LCD_PINS_D7 33 + + #if ENABLED(NEWPANEL) + // Buttons are directly attached using keypad + #define BTN_EN1 61 + #define BTN_EN2 59 + #define BTN_ENC 43 + #else + // Buttons attached to shift register of reprapworld keypad v1.1 + #define SHIFT_CLK 63 + #define SHIFT_LD 42 + #define SHIFT_OUT 17 + #define SHIFT_EN 17 + #endif + +#endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_3.h b/Marlin/src/pins/mega/pins_MEGATRONICS_3.h index 77edc79e1..7a6465471 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_3.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_3.h @@ -30,11 +30,11 @@ #endif #if MB(MEGATRONICS_32) - #define BOARD_NAME "Megatronics v3.2" + #define BOARD_INFO_NAME "Megatronics v3.2" #elif MB(MEGATRONICS_31) - #define BOARD_NAME "Megatronics v3.1" + #define BOARD_INFO_NAME "Megatronics v3.1" #else - #define BOARD_NAME "Megatronics v3.0" + #define BOARD_INFO_NAME "Megatronics v3.0" #endif // diff --git a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h index 4b93add4c..703d5caae 100644 --- a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h +++ b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h @@ -41,7 +41,7 @@ #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Mightyboard" +#define BOARD_INFO_NAME "Mightyboard" #define DEFAULT_MACHINE_NAME "MB Replicator" // diff --git a/Marlin/src/pins/mega/pins_MINITRONICS.h b/Marlin/src/pins/mega/pins_MINITRONICS.h index ad1b737e0..16fad0067 100644 --- a/Marlin/src/pins/mega/pins_MINITRONICS.h +++ b/Marlin/src/pins/mega/pins_MINITRONICS.h @@ -38,7 +38,7 @@ #error "Minitronics supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "Minitronics v1.0/1.1" +#define BOARD_INFO_NAME "Minitronics v1.0/1.1" // // Limit Switches // diff --git a/Marlin/src/pins/mega/pins_OVERLORD.h b/Marlin/src/pins/mega/pins_OVERLORD.h index 8a9e3f5bd..b6043c018 100644 --- a/Marlin/src/pins/mega/pins_OVERLORD.h +++ b/Marlin/src/pins/mega/pins_OVERLORD.h @@ -31,8 +31,8 @@ #error "Overlord Controller supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "OVERLORD" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "OVERLORD" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME // // Limit Switches diff --git a/Marlin/src/pins/mega/pins_SILVER_GATE.h b/Marlin/src/pins/mega/pins_SILVER_GATE.h index 2d1bb12a9..2ea2b09f5 100644 --- a/Marlin/src/pins/mega/pins_SILVER_GATE.h +++ b/Marlin/src/pins/mega/pins_SILVER_GATE.h @@ -25,7 +25,7 @@ #error "Oops! Select 'Silvergate' in 'Tools > Board.'" #endif -#define BOARD_NAME "Silver Gate" +#define BOARD_INFO_NAME "Silver Gate" #define X_STEP_PIN 43 #define X_DIR_PIN 44 diff --git a/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h b/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h index 86f295b62..1cceef8da 100644 --- a/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h +++ b/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Wanhao i3 Mini 0ne+" +#define BOARD_INFO_NAME "Wanhao i3 Mini 0ne+" #define DEFAULT_MACHINE_NAME "i3 Mini" #define BOARD_WEBSITE_URL "https://tinyurl.com/yyxw7se7" @@ -92,20 +92,20 @@ #define KILL_PIN 64 // -// LCD / Controller +// LCD / Controller (Integrated MINIPANEL) // - -#if HAS_SPI_LCD +#if ENABLED(MINIPANEL) #define DOGLCD_A0 40 #define DOGLCD_CS 41 #define LCD_BACKLIGHT_PIN 65 // Backlight LED on A11/D65 #define LCD_RESET_PIN 27 - #define LCD_CONTRAST 255 + #define BTN_EN1 2 + #define BTN_EN2 3 + #define BTN_ENC 5 - #if ENABLED(NEWPANEL) - #define BTN_EN1 2 - #define BTN_EN2 3 - #define BTN_ENC 5 - #endif + // This display has adjustable contrast + #define LCD_CONTRAST_MIN 0 + #define LCD_CONTRAST_MAX 255 + #define LCD_CONTRAST_INIT LCD_CONTRAST_MAX #endif diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 73439cf26..9f4b6d553 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -202,6 +202,8 @@ #include "mega/pins_CNCONTROLS_11.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 #elif MB(CNCONTROLS_12) #include "mega/pins_CNCONTROLS_12.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(CNCONTROLS_15) + #include "mega/pins_CNCONTROLS_15.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 #elif MB(MIGHTYBOARD_REVE) #include "mega/pins_MIGHTYBOARD_REVE.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 #elif MB(CHEAPTRONIC) @@ -351,8 +353,6 @@ #include "lpc1768/pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768 #elif MB(BIGTREE_SKR_V1_3) #include "lpc1768/pins_BIGTREE_SKR_V1.3.h" // LPC1768 env:LPC1768 -#elif MB(TH3D_EZBOARD) - #include "lpc1768/pins_TH3D_EZBOARD.h" // LPC1768 env:LPC1768 #elif MB(GMARSH_X6_REV1) #include "lpc1768/pins_GMARSH_X6_REV1.h" // LPC1768 env:LPC1768 @@ -374,6 +374,8 @@ #include "lpc1769/pins_COHESION3D_MINI.h" // LPC1769 env:LPC1769 #elif MB(SMOOTHIEBOARD) #include "lpc1769/pins_SMOOTHIEBOARD.h" // LPC1769 env:LPC1769 +#elif MB(TH3D_EZBOARD) + #include "lpc1769/pins_TH3D_EZBOARD.h" // LPC1769 env:LPC1769 // // Due (ATSAM) boards @@ -504,6 +506,8 @@ #include "stm32/pins_STEVAL.h" // STM32F4 env:STM32F4 #elif MB(BIGTREE_SKR_PRO_V1_1) #include "stm32/pins_BIGTREE_SKR_PRO_V1.1.h" // STM32F4 env:BIGTREE_SKR_PRO +#elif MB(BIGTREE_BTT002_V1_0) + #include "stm32/pins_BIGTREE_BTT002_V1.0.h" // STM32F4 env:BIGTREE_BTT002 // // ARM Cortex M7 @@ -940,7 +944,7 @@ #define LCD_PINS_D4 -1 #endif -#if HAS_CHARACTER_LCD +#if HAS_CHARACTER_LCD || TOUCH_UI_ULTIPANEL #ifndef LCD_PINS_D5 #define LCD_PINS_D5 -1 #endif diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h index 56a597ffc..d667032c9 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'" #endif -#define BOARD_NAME "Einsy Rambo" +#define BOARD_INFO_NAME "Einsy Rambo" // // TMC2130 Configuration_adv defaults for EinsyRambo @@ -149,11 +149,11 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL #define KILL_PIN 32 - #if ENABLED(NEWPANEL) + #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL #if ENABLED(CR10_STOCKDISPLAY) #define LCD_PINS_RS 85 @@ -176,5 +176,5 @@ #define BEEPER_PIN 84 // AUX-4 #define SD_DETECT_PIN 15 - #endif // NEWPANEL + #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h index 675f5e3de..cd42f4840 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'" #endif -#define BOARD_NAME "Einsy Retro" +#define BOARD_INFO_NAME "Einsy Retro" // // TMC2130 Configuration_adv defaults for EinsyRetro @@ -163,11 +163,11 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL #define KILL_PIN 32 - #if ENABLED(NEWPANEL) + #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL #if ENABLED(CR10_STOCKDISPLAY) #define LCD_PINS_RS 85 @@ -188,7 +188,8 @@ #define BTN_ENC 9 // AUX-2 #define BEEPER_PIN 84 // AUX-4 + #define SD_DETECT_PIN 15 - #endif // NEWPANEL + #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/rambo/pins_MINIRAMBO.h b/Marlin/src/pins/rambo/pins_MINIRAMBO.h index da4f77f7d..51c5fab89 100644 --- a/Marlin/src/pins/rambo/pins_MINIRAMBO.h +++ b/Marlin/src/pins/rambo/pins_MINIRAMBO.h @@ -30,9 +30,9 @@ #endif #if MB(MINIRAMBO_10A) - #define BOARD_NAME "Mini RAMBo 1.0a" + #define BOARD_INFO_NAME "Mini RAMBo 1.0a" #else - #define BOARD_NAME "Mini RAMBo" + #define BOARD_INFO_NAME "Mini RAMBo" #endif // @@ -141,13 +141,13 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL #if !MB(MINIRAMBO_10A) #define KILL_PIN 32 #endif - #if ENABLED(NEWPANEL) + #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL #if MB(MINIRAMBO_10A) @@ -187,6 +187,6 @@ #endif // !MINIRAMBO_10A - #endif // NEWPANEL + #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h index 10a6a1b5b..1094e0687 100644 --- a/Marlin/src/pins/rambo/pins_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_RAMBO.h @@ -45,7 +45,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Rambo" +#define BOARD_INFO_NAME "Rambo" // // Servos @@ -169,11 +169,11 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL #define KILL_PIN 80 - #if ENABLED(NEWPANEL) + #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL #define LCD_PINS_RS 70 #define LCD_PINS_ENABLE 71 @@ -219,7 +219,7 @@ // No Beeper added #define BEEPER_PIN 33 - // buttons are attached to a shift register + // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 //#define SHIFT_LD 42 diff --git a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h index c9affcba6..e8c9b2ebc 100644 --- a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h +++ b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Scoovo X9H" +#define BOARD_INFO_NAME "Scoovo X9H" // // Servos diff --git a/Marlin/src/pins/ramps/pins_3DRAG.h b/Marlin/src/pins/ramps/pins_3DRAG.h index eae958da6..e6c3bdc2e 100644 --- a/Marlin/src/pins/ramps/pins_3DRAG.h +++ b/Marlin/src/pins/ramps/pins_3DRAG.h @@ -25,12 +25,12 @@ * 3DRAG (and K8200 / K8400) Arduino Mega with RAMPS v1.4 pin assignments */ -#ifndef BOARD_NAME - #define BOARD_NAME "3Drag" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "3Drag" #endif #ifndef DEFAULT_MACHINE_NAME - #define DEFAULT_MACHINE_NAME BOARD_NAME + #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #endif #ifndef DEFAULT_SOURCE_CODE_URL diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h index 06686a016..692d4f8a6 100644 --- a/Marlin/src/pins/ramps/pins_AZTEEG_X3.h +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h @@ -34,7 +34,7 @@ #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) #define CASE_LIGHT_PIN 6 // Define before RAMPS pins include #endif -#define BOARD_NAME "Azteeg X3" +#define BOARD_INFO_NAME "Azteeg X3" // // Servos diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h index 195f742ad..62014217f 100644 --- a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h @@ -31,7 +31,7 @@ #error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "Azteeg X3 Pro" +#define BOARD_INFO_NAME "Azteeg X3 Pro" // // RAMPS pins overrides diff --git a/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h b/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h index 74a69fb8c..4cadf481f 100644 --- a/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h +++ b/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h @@ -29,7 +29,7 @@ #error "2PrintBeta Due supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "2PrintBeta Due" +#define BOARD_INFO_NAME "2PrintBeta Due" // // M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/ramps/pins_BIQU_KFB_2.h b/Marlin/src/pins/ramps/pins_BIQU_KFB_2.h index 2c370efdf..7f27df6eb 100644 --- a/Marlin/src/pins/ramps/pins_BIQU_KFB_2.h +++ b/Marlin/src/pins/ramps/pins_BIQU_KFB_2.h @@ -29,7 +29,7 @@ #error "KFB 2.0 supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "KFB 2.0" +#define BOARD_INFO_NAME "KFB 2.0" // // Heaters / Fans diff --git a/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h b/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h index 5a49c0a3b..14013d874 100644 --- a/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h +++ b/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "ZUM Mega 3D" +#define BOARD_INFO_NAME "ZUM Mega 3D" // // Heaters / Fans diff --git a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h index 290637eb7..0ffc70aa7 100644 --- a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h +++ b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Duplicator i3 Plus" +#define BOARD_INFO_NAME "Duplicator i3 Plus" // // Limit Switches diff --git a/Marlin/src/pins/ramps/pins_FELIX2.h b/Marlin/src/pins/ramps/pins_FELIX2.h index 5a1f65058..c2c2b4bbf 100644 --- a/Marlin/src/pins/ramps/pins_FELIX2.h +++ b/Marlin/src/pins/ramps/pins_FELIX2.h @@ -29,7 +29,7 @@ #error "Felix 2.0+ supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "Felix 2.0+" +#define BOARD_INFO_NAME "Felix 2.0+" // // Heaters / Fans diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h index 292e713af..e7a2a5da0 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h @@ -31,8 +31,8 @@ #error "Formbot supports up to 3 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "Formbot Raptor" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "Formbot Raptor" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME // // Servos diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h index b5c69a06d..1c2424ccf 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h @@ -25,8 +25,8 @@ * Formbot Raptor 2 pin assignments */ -#define BOARD_NAME "Formbot Raptor2" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "Formbot Raptor2" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #define FAN_PIN 6 diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h index 325076b21..665462c01 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h @@ -31,8 +31,8 @@ #error "Formbot supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "Formbot" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "Formbot" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME // // Servos diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h index 111a10d64..a96585eb6 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h @@ -31,8 +31,8 @@ #error "Formbot supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "Formbot" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "Formbot" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME // // Servos diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h index 678b9c30a..1168948d9 100644 --- a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h +++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h @@ -33,7 +33,7 @@ //#error "SD_DETECT_INVERTED must be disabled for the FYSETC_F6_13 board." #endif -#define BOARD_NAME "FYSETC F6 1.3" +#define BOARD_INFO_NAME "FYSETC F6 1.3" #define RESET_PIN 30 #define SPI_FLASH_CS 83 diff --git a/Marlin/src/pins/ramps/pins_K8200.h b/Marlin/src/pins/ramps/pins_K8200.h index c134585da..41cc4dfbf 100644 --- a/Marlin/src/pins/ramps/pins_K8200.h +++ b/Marlin/src/pins/ramps/pins_K8200.h @@ -26,7 +26,7 @@ * Identical to 3DRAG */ -#define BOARD_NAME "Velleman K8200" +#define BOARD_INFO_NAME "Velleman K8200" #define DEFAULT_MACHINE_NAME "K8200" #define DEFAULT_SOURCE_CODE_URL "https://github.com/CONSULitAS/Marlin-K8200" diff --git a/Marlin/src/pins/ramps/pins_K8400.h b/Marlin/src/pins/ramps/pins_K8400.h index 908b6e61e..a47d21c91 100644 --- a/Marlin/src/pins/ramps/pins_K8400.h +++ b/Marlin/src/pins/ramps/pins_K8400.h @@ -32,7 +32,7 @@ * - Second heater has moved pin */ -#define BOARD_NAME "K8400" +#define BOARD_INFO_NAME "K8400" #define DEFAULT_MACHINE_NAME "Vertex" #include "pins_3DRAG.h" diff --git a/Marlin/src/pins/ramps/pins_K8800.h b/Marlin/src/pins/ramps/pins_K8800.h index 22b5081db..bfc61d018 100644 --- a/Marlin/src/pins/ramps/pins_K8800.h +++ b/Marlin/src/pins/ramps/pins_K8800.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "K8800" +#define BOARD_INFO_NAME "K8800" #define DEFAULT_MACHINE_NAME "Vertex Delta" //#define LCD_SCREEN_ROT_180 diff --git a/Marlin/src/pins/ramps/pins_MAKEBOARD_MINI.h b/Marlin/src/pins/ramps/pins_MAKEBOARD_MINI.h index 03f6ca039..66dddbef4 100644 --- a/Marlin/src/pins/ramps/pins_MAKEBOARD_MINI.h +++ b/Marlin/src/pins/ramps/pins_MAKEBOARD_MINI.h @@ -21,7 +21,7 @@ */ #pragma once -#define BOARD_NAME "MAKEboard Mini" +#define BOARD_INFO_NAME "MAKEboard Mini" // // Only 3 Limit Switch plugs on Micromake C1 diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE.h b/Marlin/src/pins/ramps/pins_MKS_BASE.h index 9ec23c1a8..75c7eb284 100644 --- a/Marlin/src/pins/ramps/pins_MKS_BASE.h +++ b/Marlin/src/pins/ramps/pins_MKS_BASE.h @@ -31,7 +31,7 @@ #error "MKS BASE 1.0 supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "MKS BASE 1.0" +#define BOARD_INFO_NAME "MKS BASE 1.0" // // Heaters / Fans diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_14.h b/Marlin/src/pins/ramps/pins_MKS_BASE_14.h index 7681f6cd9..700e2a410 100644 --- a/Marlin/src/pins/ramps/pins_MKS_BASE_14.h +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_14.h @@ -29,7 +29,7 @@ #error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "MKS BASE 1.4" +#define BOARD_INFO_NAME "MKS BASE 1.4" // // Heaters / Fans diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_13.h b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h index 705d358e0..9596214cb 100644 --- a/Marlin/src/pins/ramps/pins_MKS_GEN_13.h +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h @@ -34,7 +34,7 @@ #error "MKS GEN 1.3/1.4 supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "MKS GEN >= v1.3" +#define BOARD_INFO_NAME "MKS GEN >= v1.3" // // Heaters / Fans diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_L.h b/Marlin/src/pins/ramps/pins_MKS_GEN_L.h index 7b6ea178c..88973baa1 100644 --- a/Marlin/src/pins/ramps/pins_MKS_GEN_L.h +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_L.h @@ -29,7 +29,7 @@ #error "MKS GEN L supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "MKS GEN L" +#define BOARD_INFO_NAME "MKS GEN L" // // Heaters / Fans diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index 5e6b5fa11..1ed9e32d2 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -57,8 +57,8 @@ #endif #endif -#ifndef BOARD_NAME - #define BOARD_NAME "RAMPS 1.4" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RAMPS 1.4" #endif // @@ -477,7 +477,7 @@ #endif #if DISABLED(NEWPANEL) - // Buttons are attached to a shift register + // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 //#define SHIFT_LD 42 diff --git a/Marlin/src/pins/ramps/pins_RAMPS_13.h b/Marlin/src/pins/ramps/pins_RAMPS_13.h index 70bfd51d5..508064e66 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_13.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_13.h @@ -34,8 +34,8 @@ * */ -#ifndef BOARD_NAME - #define BOARD_NAME "RAMPS 1.3" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RAMPS 1.3" #endif #define IS_RAMPS_13 diff --git a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h index 2e5471a5b..9be7bdef3 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h @@ -25,7 +25,7 @@ #error "Creality3D RAMPS supports only 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "Creality3D RAMPS" +#define BOARD_INFO_NAME "Creality3D RAMPS" // // Heaters / Fans @@ -35,6 +35,11 @@ #define MOSFET_D_PIN 7 #define FIL_RUNOUT_PIN 2 +#if NUM_RUNOUT_SENSORS > 1 + #define FIL_RUNOUT2_PIN 15 // Creality CR-X can use dual runout sensors +#endif + +#define SD_DETECT_PIN 49 // Always define onboard SD detect #include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h b/Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h index cacdb8381..43937e213 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h @@ -25,7 +25,7 @@ #error "Dagoma3D F5 RAMPS supports only 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "Dagoma3D F5 RAMPS" +#define BOARD_INFO_NAME "Dagoma3D F5 RAMPS" #define X_STOP_PIN 2 #define Y_STOP_PIN 3 diff --git a/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h b/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h index 3a452f986..0eb3035c1 100755 --- a/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h @@ -25,7 +25,7 @@ #error "Ender-4 supports only 1 hotend / E-stepper. Comment out this line to continue." #endif -#define BOARD_NAME "Ender-4" +#define BOARD_INFO_NAME "Ender-4" #include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_RAMPS_OLD.h b/Marlin/src/pins/ramps/pins_RAMPS_OLD.h index 13a2d9dee..a55348fec 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_OLD.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_OLD.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "RAMPS <1.2" +#define BOARD_INFO_NAME "RAMPS <1.2" // Uncomment the following line for RAMPS v1.0 //#define RAMPS_V_1_0 diff --git a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h index 77b5ee6f5..02193a5a0 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h @@ -42,7 +42,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "RAMPS 1.4 Plus" +#define BOARD_INFO_NAME "RAMPS 1.4 Plus" #define RAMPS_D8_PIN 10 #define RAMPS_D10_PIN 8 diff --git a/Marlin/src/pins/ramps/pins_RIGIDBOARD.h b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h index f4b38d630..c69843c62 100644 --- a/Marlin/src/pins/ramps/pins_RIGIDBOARD.h +++ b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h @@ -25,8 +25,8 @@ * RIGIDBOARD Arduino Mega with RAMPS v1.4 pin assignments */ -#ifndef BOARD_NAME - #define BOARD_NAME "RigidBoard" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RigidBoard" #endif // diff --git a/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h b/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h index b9ccd45f1..01ccb5927 100644 --- a/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h +++ b/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h @@ -25,7 +25,7 @@ * RIGIDBOARD V2 Arduino Mega with RAMPS v1.4 pin assignments */ -#define BOARD_NAME "RigidBoard V2" +#define BOARD_INFO_NAME "RigidBoard V2" #include "pins_RIGIDBOARD.h" diff --git a/Marlin/src/pins/ramps/pins_RL200.h b/Marlin/src/pins/ramps/pins_RL200.h index 381b882e9..1202638d1 100644 --- a/Marlin/src/pins/ramps/pins_RL200.h +++ b/Marlin/src/pins/ramps/pins_RL200.h @@ -26,7 +26,7 @@ * extruder motors due to dual Z motors. Pinout therefore based on pins_RUMBA.h. */ -#define BOARD_NAME "RL200" +#define BOARD_INFO_NAME "RL200" #define DEFAULT_MACHINE_NAME "Rapide Lite 200" #if HOTENDS > 2 || E_STEPPERS > 2 diff --git a/Marlin/src/pins/ramps/pins_RUMBA.h b/Marlin/src/pins/ramps/pins_RUMBA.h index 0f8ea6ee9..2f934b3a4 100644 --- a/Marlin/src/pins/ramps/pins_RUMBA.h +++ b/Marlin/src/pins/ramps/pins_RUMBA.h @@ -31,11 +31,11 @@ #error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue." #endif -#ifndef BOARD_NAME - #define BOARD_NAME "Rumba" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Rumba" #endif #ifndef DEFAULT_MACHINE_NAME - #define DEFAULT_MACHINE_NAME BOARD_NAME + #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #endif // diff --git a/Marlin/src/pins/ramps/pins_RUMBA_RAISE3D.h b/Marlin/src/pins/ramps/pins_RUMBA_RAISE3D.h index d04695e29..0cc4ebb3b 100644 --- a/Marlin/src/pins/ramps/pins_RUMBA_RAISE3D.h +++ b/Marlin/src/pins/ramps/pins_RUMBA_RAISE3D.h @@ -21,7 +21,7 @@ */ #pragma once -#define BOARD_NAME "Raise3D Rumba" +#define BOARD_INFO_NAME "Raise3D Rumba" #define DEFAULT_MACHINE_NAME "Raise3D N Series" // Raise3D uses thermocouples on the standard input pins diff --git a/Marlin/src/pins/ramps/pins_SAINSMART_2IN1.h b/Marlin/src/pins/ramps/pins_SAINSMART_2IN1.h index a3d24017d..27c746ad2 100644 --- a/Marlin/src/pins/ramps/pins_SAINSMART_2IN1.h +++ b/Marlin/src/pins/ramps/pins_SAINSMART_2IN1.h @@ -29,7 +29,7 @@ #error "Sainsmart 2-in-1 supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "Sainsmart" +#define BOARD_INFO_NAME "Sainsmart" // // Heaters / Fans diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_13.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_13.h index 77e0bdf04..fd0b67c88 100644 --- a/Marlin/src/pins/ramps/pins_TRIGORILLA_13.h +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_13.h @@ -25,7 +25,7 @@ * Arduino Mega with RAMPS v1.3 for Anycubic */ -#define BOARD_NAME "Anycubic RAMPS 1.3" +#define BOARD_INFO_NAME "Anycubic RAMPS 1.3" #define IS_RAMPS_EFB #define RAMPS_D9_PIN 44 diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h index c5c3ac0ac..031ab8e16 100644 --- a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h @@ -25,7 +25,7 @@ * Arduino Mega with RAMPS v1.4 for Anycubic */ -#define BOARD_NAME "Anycubic RAMPS 1.4" +#define BOARD_INFO_NAME "Anycubic RAMPS 1.4" // // Servos diff --git a/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h b/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h index a1202213e..48b510d8c 100644 --- a/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h +++ b/Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h @@ -31,7 +31,7 @@ #error "TRONXY-V3-1.0 supports only 2 hotends/E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "TRONXY-V3-1.0" +#define BOARD_INFO_NAME "TRONXY-V3-1.0" // // Servos diff --git a/Marlin/src/pins/ramps/pins_TT_OSCAR.h b/Marlin/src/pins/ramps/pins_TT_OSCAR.h index edc326fe9..1c40729a8 100644 --- a/Marlin/src/pins/ramps/pins_TT_OSCAR.h +++ b/Marlin/src/pins/ramps/pins_TT_OSCAR.h @@ -28,8 +28,8 @@ #error "TTOSCAR supports up to 5 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "TT OSCAR" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "TT OSCAR" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME // // Servos @@ -337,7 +337,7 @@ #endif #if DISABLED(NEWPANEL) - // Buttons are attached to a shift register + // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 //#define SHIFT_LD 42 @@ -436,7 +436,7 @@ #define DOGLCD_CS 25 // GLCD features - //#define LCD_CONTRAST 190 + //#define LCD_CONTRAST_INIT 190 // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 @@ -463,7 +463,7 @@ #define DOGLCD_CS 66 // GLCD features - //#define LCD_CONTRAST 190 + //#define LCD_CONTRAST_INIT 190 // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 diff --git a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h index da1eecbdb..c182aa96f 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h @@ -37,7 +37,7 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Ultimaker 2.x" +#define BOARD_INFO_NAME "Ultimaker 2.x" #define DEFAULT_MACHINE_NAME "Ultimaker" #define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin" diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER.h b/Marlin/src/pins/ramps/pins_ULTIMAKER.h index f6239ae16..b2594aceb 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER.h @@ -37,8 +37,8 @@ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "Ultimaker" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "Ultimaker" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin" // @@ -129,7 +129,7 @@ #define LCD_PINS_D6 5 #define LCD_PINS_D7 6 - // buttons are directly attached + // Buttons directly attached #define BTN_EN1 40 #define BTN_EN2 42 #define BTN_ENC 19 @@ -138,7 +138,7 @@ #else // !NEWPANEL - Old style panel with shift register - // buttons are attached to a shift register + // Buttons attached to a shift register #define SHIFT_CLK 38 #define SHIFT_LD 42 #define SHIFT_OUT 40 diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h index 6a25b509e..dd9aaf129 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h @@ -36,7 +36,7 @@ * the revisions provided inconsistent information. * * As best I can determine: - * 1.5.3 boards should use the pins_ULTIMAKER.h file which means the BOARD_NAME + * 1.5.3 boards should use the pins_ULTIMAKER.h file which means the BOARD_INFO_NAME * define in this file should say 1.5.3 rather than 1.5.4 * This file is meant for 1.1 - 1.3 boards. * The endstops for the 1.0 boards use different definitions than on the 1.1 - 1.3 @@ -65,13 +65,13 @@ #endif #ifdef BOARD_REV_1_1_TO_1_3 - #define BOARD_NAME "Ultimaker 1.1-1.3" + #define BOARD_INFO_NAME "Ultimaker 1.1-1.3" #elif defined(BOARD_REV_1_0) - #define BOARD_NAME "Ultimaker 1.0" + #define BOARD_INFO_NAME "Ultimaker 1.0" #elif defined(BOARD_REV_1_5) - #define BOARD_NAME "Ultimaker 1.5" + #define BOARD_INFO_NAME "Ultimaker 1.5" #else - #define BOARD_NAME "Ultimaker 1.5.4+" + #define BOARD_INFO_NAME "Ultimaker 1.5.4+" #endif #define DEFAULT_MACHINE_NAME "Ultimaker" #define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin" @@ -187,7 +187,7 @@ #define LCD_PINS_D6 5 #define LCD_PINS_D7 6 - // buttons are directly attached + // Buttons directly attached #define BTN_EN1 40 #define BTN_EN2 42 #define BTN_ENC 19 @@ -196,7 +196,7 @@ #else // !NEWPANEL - Old style panel with shift register - // buttons are attached to a shift register + // Buttons attached to a shift register #define SHIFT_CLK 38 #define SHIFT_LD 42 #define SHIFT_OUT 40 diff --git a/Marlin/src/pins/ramps/pins_VORON.h b/Marlin/src/pins/ramps/pins_VORON.h index 13c93e187..43c331716 100644 --- a/Marlin/src/pins/ramps/pins_VORON.h +++ b/Marlin/src/pins/ramps/pins_VORON.h @@ -26,7 +26,7 @@ * See https://github.com/mzbotreprap/VORON/blob/master/Firmware/Marlin/pins_RAMPS_VORON.h */ -#define BOARD_NAME "VORON Design v2" +#define BOARD_INFO_NAME "VORON Design v2" #define RAMPS_D8_PIN 11 diff --git a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h index de1899e7f..aa8081857 100644 --- a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h +++ b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h @@ -31,7 +31,7 @@ #error "Z-Bolt X Series board supports up to 4 hotends / E-steppers." #endif -#define BOARD_NAME "Z-Bolt X Series" +#define BOARD_INFO_NAME "Z-Bolt X Series" // // Servos diff --git a/Marlin/src/pins/sam/pins_ADSK.h b/Marlin/src/pins/sam/pins_ADSK.h index e18a14ded..c502f0767 100644 --- a/Marlin/src/pins/sam/pins_ADSK.h +++ b/Marlin/src/pins/sam/pins_ADSK.h @@ -25,7 +25,7 @@ * Arduino DUE Shield Kit (ADSK) pin assignments */ -#define BOARD_NAME "ADSK" +#define BOARD_INFO_NAME "ADSK" #if !defined(__SAM3X8E__) && !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) #error "Oops! Select 'Arduino Due or Mega' in 'Tools > Board.'" diff --git a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h index 538f4b4f5..75dd00464 100644 --- a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h +++ b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h @@ -30,7 +30,7 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#define BOARD_NAME "Alligator Board R2" +#define BOARD_INFO_NAME "Alligator Board R2" // // Servos diff --git a/Marlin/src/pins/sam/pins_ARCHIM1.h b/Marlin/src/pins/sam/pins_ARCHIM1.h index 73f78ba1e..990c8fc1f 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM1.h +++ b/Marlin/src/pins/sam/pins_ARCHIM1.h @@ -41,7 +41,7 @@ #error "Oops! Select 'Archim' in 'Tools > Board.'" #endif -#define BOARD_NAME "Archim 1.0" +#define BOARD_INFO_NAME "Archim 1.0" // // Items marked * have been altered from Archim v1.0 diff --git a/Marlin/src/pins/sam/pins_ARCHIM2.h b/Marlin/src/pins/sam/pins_ARCHIM2.h index 95200adb3..f3052ddcf 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM2.h +++ b/Marlin/src/pins/sam/pins_ARCHIM2.h @@ -43,7 +43,7 @@ #error "Archim2 requires Software SPI. Enable TMC_USE_SW_SPI in Configuration_adv.h." #endif -#define BOARD_NAME "Archim 2.0" +#define BOARD_INFO_NAME "Archim 2.0" // // Items marked * have been altered from Archim v1.0 @@ -231,7 +231,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL #define BEEPER_PIN 23 // D24 PA15_CTS1 #define LCD_PINS_RS 17 // D17 PA12_RXD1 #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 @@ -242,10 +242,10 @@ #define SD_DETECT_PIN 2 // D2 PB25_TIOA0 - #if ENABLED(NEWPANEL) + #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL // Buttons on AUX-2 #define BTN_EN1 60 // D60 PA3_TIOB1 #define BTN_EN2 13 // D13 PB27_TIOB0 #define BTN_ENC 16 // D16 PA13_TXD1 // the click - #endif // NEWPANEL + #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/sam/pins_DUE3DOM.h b/Marlin/src/pins/sam/pins_DUE3DOM.h index 2eb79c9dc..731e31def 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#define BOARD_NAME "DUE3DOM" +#define BOARD_INFO_NAME "DUE3DOM" // // Servos diff --git a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h index 3783b7612..ed9781388 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#define BOARD_NAME "DUE3DOM MINI" +#define BOARD_INFO_NAME "DUE3DOM MINI" // // Servos diff --git a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h index b23c1af08..4df3bc7f1 100644 --- a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h +++ b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h @@ -29,8 +29,8 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#ifndef BOARD_NAME - #define BOARD_NAME "PRINTRBOARD_G2" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "PRINTRBOARD_G2" #endif // diff --git a/Marlin/src/pins/sam/pins_RADDS.h b/Marlin/src/pins/sam/pins_RADDS.h index 52c638826..85db7492e 100644 --- a/Marlin/src/pins/sam/pins_RADDS.h +++ b/Marlin/src/pins/sam/pins_RADDS.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#define BOARD_NAME "RADDS" +#define BOARD_INFO_NAME "RADDS" // // Servos diff --git a/Marlin/src/pins/sam/pins_RAMPS4DUE.h b/Marlin/src/pins/sam/pins_RAMPS4DUE.h index c36ed150e..36c0717bc 100644 --- a/Marlin/src/pins/sam/pins_RAMPS4DUE.h +++ b/Marlin/src/pins/sam/pins_RAMPS4DUE.h @@ -43,7 +43,7 @@ #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "RAMPS4DUE" +#define BOARD_INFO_NAME "RAMPS4DUE" #define IS_RAMPS4DUE // diff --git a/Marlin/src/pins/sam/pins_RAMPS_DUO.h b/Marlin/src/pins/sam/pins_RAMPS_DUO.h index bfee7c753..4f9053b8c 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_DUO.h +++ b/Marlin/src/pins/sam/pins_RAMPS_DUO.h @@ -47,7 +47,7 @@ #error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #endif -#define BOARD_NAME "RAMPS Duo" +#define BOARD_INFO_NAME "RAMPS Duo" #define IS_RAMPS_DUO #include "pins_RAMPS.h" diff --git a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h index c0e3584c3..5add612cc 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h +++ b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h @@ -32,8 +32,8 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#ifndef BOARD_NAME - #define BOARD_NAME "RAMPS-FD v1" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "RAMPS-FD v1" #endif #define INVERTED_HEATER_PINS diff --git a/Marlin/src/pins/sam/pins_RAMPS_FD_V2.h b/Marlin/src/pins/sam/pins_RAMPS_FD_V2.h index d4f25af16..22fdafd68 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_FD_V2.h +++ b/Marlin/src/pins/sam/pins_RAMPS_FD_V2.h @@ -28,7 +28,7 @@ * Use 1k thermistor tables */ -#define BOARD_NAME "RAMPS-FD v2" +#define BOARD_INFO_NAME "RAMPS-FD v2" #ifndef E0_CS_PIN #define E0_CS_PIN 69 // moved from A13 to A15 on v2.2, if not earlier diff --git a/Marlin/src/pins/sam/pins_RAMPS_SMART.h b/Marlin/src/pins/sam/pins_RAMPS_SMART.h index 0ba411480..f1f593991 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_SMART.h +++ b/Marlin/src/pins/sam/pins_RAMPS_SMART.h @@ -64,7 +64,7 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#define BOARD_NAME "RAMPS-SMART" +#define BOARD_INFO_NAME "RAMPS-SMART" #define IS_RAMPS_SMART #include "pins_RAMPS.h" diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h index 85dc9eaea..b457c7852 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h @@ -36,7 +36,7 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#define BOARD_NAME "RuRAMPS4Due v1.1" +#define BOARD_INFO_NAME "RuRAMPS4Due v1.1" // // Servos diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h index 1c22f8f5a..6931654a7 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h @@ -36,7 +36,7 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#define BOARD_NAME "RuRAMPS4Due v1.3" +#define BOARD_INFO_NAME "RuRAMPS4Due v1.3" // // Servos diff --git a/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h index b77469b0d..94fb7cddc 100644 --- a/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h +++ b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h @@ -29,7 +29,7 @@ #error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #endif -#define BOARD_NAME "Ultratronics v1.0" +#define BOARD_INFO_NAME "Ultratronics v1.0" // // Servos diff --git a/Marlin/src/pins/samd/pins_AGCM4_RURAMPS4D_13.h b/Marlin/src/pins/samd/pins_AGCM4_RURAMPS4D_13.h index 570c59894..dfd8113a0 100644 --- a/Marlin/src/pins/samd/pins_AGCM4_RURAMPS4D_13.h +++ b/Marlin/src/pins/samd/pins_AGCM4_RURAMPS4D_13.h @@ -26,7 +26,7 @@ #error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'" #endif -#define BOARD_NAME "RuRAMPS4AGCM4 v1.3" +#define BOARD_INFO_NAME "RuRAMPS4AGCM4 v1.3" // // Servos @@ -170,67 +170,69 @@ // #if HAS_SPI_LCD - #if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER) + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #error "Pin compatibility check needed!" - #define BEEPER_PIN 54 - #define LCD_PINS_D4 48 - #define LCD_PINS_D7 53 - #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI - #define LCD_PINS_RS 55 + #define BEEPER_PIN 54 + #define LCD_PINS_D4 48 + #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI + #define LCD_PINS_RS 55 #define LCD_PINS_ENABLE 56 - #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #elif EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 54 - #define LCD_PINS_D4 48 - #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI - #define LCD_PINS_RS 55 + #error "Pin compatibility check needed!" + #define BEEPER_PIN 54 + #define LCD_PINS_D4 48 + #define LCD_PINS_D5 -1 // 50 can't be used, it's MISO + #define LCD_PINS_D6 -1 // 52 can't be used, it's SCK + #define LCD_PINS_D7 53 + #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI + #define LCD_PINS_RS 55 #define LCD_PINS_ENABLE 56 #elif HAS_SSD1306_OLED_I2C #error "Pin compatibility check needed!" - #define BEEPER_PIN 54 - #define LCD_SDSS 10 - #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI + #define BEEPER_PIN 54 + #define LCD_SDSS 10 + #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI #elif ENABLED(FYSETC_MINI_12864) - #error "Pin compatibility check needed!" - #define BEEPER_PIN 54 - #define DOGLCD_CS 56 - #define DOGLCD_A0 55 + #define BEEPER_PIN 54 + #define DOGLCD_CS 56 + #define DOGLCD_A0 55 - //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) - #error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK." + #error "Pin compatibility check needed!" #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN 50 // D5 + #define RGB_LED_R_PIN 50 // 50 can't be used, it's MISO #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN 52 // D6 + #define RGB_LED_G_PIN 52 // 52 can't be used, it's SCK #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN 53 // D7 + #define RGB_LED_B_PIN 53 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK." - #define NEOPIXEL_PIN 50 // D5 + #error "Pin compatibility check needed!" + #define NEOPIXEL_PIN 50 // 50 can't be used, it's MISO #endif #elif ENABLED(MKS_MINI_12864) - #error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK." + + #error "Pin compatibility check needed!" #define ORIG_BEEPER_PIN 75 - #define DOGLCD_A0 52 - #define DOGLCD_CS 50 + #define DOGLCD_A0 52 // 52 can't be used, it's SCK + #define DOGLCD_CS 50 // 50 can't be used, it's MISO - #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI + #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI #endif diff --git a/Marlin/src/pins/sanguino/pins_ANET_10.h b/Marlin/src/pins/sanguino/pins_ANET_10.h index b10a7cfa0..81c479c85 100644 --- a/Marlin/src/pins/sanguino/pins_ANET_10.h +++ b/Marlin/src/pins/sanguino/pins_ANET_10.h @@ -93,7 +93,7 @@ #error "Oops! Select 'Sanguino' in 'Tools > Board' and 'ATmega1284P' in 'Tools > Processor.' (For PlatformIO, use 'melzi' or 'melzi_optiboot.')" #endif -#define BOARD_NAME "Anet 1.0" +#define BOARD_INFO_NAME "Anet 1.0" // // Limit Switches diff --git a/Marlin/src/pins/sanguino/pins_AZTEEG_X1.h b/Marlin/src/pins/sanguino/pins_AZTEEG_X1.h index 8c10bc8fb..4140dc4b9 100644 --- a/Marlin/src/pins/sanguino/pins_AZTEEG_X1.h +++ b/Marlin/src/pins/sanguino/pins_AZTEEG_X1.h @@ -25,6 +25,6 @@ * Azteeg X1 pin assignments */ -#define BOARD_NAME "Azteeg X1" +#define BOARD_INFO_NAME "Azteeg X1" #include "pins_SANGUINOLOLU_12.h" diff --git a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h index e48b340e1..3059f6c89 100644 --- a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h +++ b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h @@ -54,7 +54,7 @@ #error "Oops! Select 'Sanguino' in 'Tools > Board.'" #endif -#define BOARD_NAME "Gen3 Monolithic" +#define BOARD_INFO_NAME "Gen3 Monolithic" #define DEBUG_PIN 0 // diff --git a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h index 9b5f42caa..e370a888f 100644 --- a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h +++ b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h @@ -55,7 +55,7 @@ #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'" #endif -#define BOARD_NAME "Gen3+" +#define BOARD_INFO_NAME "Gen3+" // // Limit Switches diff --git a/Marlin/src/pins/sanguino/pins_GEN6.h b/Marlin/src/pins/sanguino/pins_GEN6.h index 2857f6f77..294b4df2f 100644 --- a/Marlin/src/pins/sanguino/pins_GEN6.h +++ b/Marlin/src/pins/sanguino/pins_GEN6.h @@ -56,8 +56,8 @@ #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'" #endif -#ifndef BOARD_NAME - #define BOARD_NAME "Gen6" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Gen6" #endif // diff --git a/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h b/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h index 359f4e64a..fc4d8b6e1 100644 --- a/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h +++ b/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h @@ -51,6 +51,6 @@ */ -#define BOARD_NAME "Gen6 Deluxe" +#define BOARD_INFO_NAME "Gen6 Deluxe" #include "pins_GEN6.h" diff --git a/Marlin/src/pins/sanguino/pins_GEN7_12.h b/Marlin/src/pins/sanguino/pins_GEN7_12.h index cd1b5b599..53e4e04df 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_12.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_12.h @@ -56,8 +56,8 @@ #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'" #endif -#ifndef BOARD_NAME - #define BOARD_NAME "Gen7 v1.1 / 1.2" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Gen7 v1.1 / 1.2" #endif #ifndef GEN7_VERSION diff --git a/Marlin/src/pins/sanguino/pins_GEN7_13.h b/Marlin/src/pins/sanguino/pins_GEN7_13.h index d38025524..7f66ac1a9 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_13.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_13.h @@ -50,7 +50,7 @@ * */ -#define BOARD_NAME "Gen7 v1.3" +#define BOARD_INFO_NAME "Gen7 v1.3" #define GEN7_VERSION 13 // v1.3 #include "pins_GEN7_12.h" diff --git a/Marlin/src/pins/sanguino/pins_GEN7_14.h b/Marlin/src/pins/sanguino/pins_GEN7_14.h index 064ffd81e..df18f6e78 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_14.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_14.h @@ -56,7 +56,7 @@ #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'" #endif -#define BOARD_NAME "Gen7 v1.4" +#define BOARD_INFO_NAME "Gen7 v1.4" #define GEN7_VERSION 14 // v1.4 diff --git a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h index d3e2b35a6..8605f0d46 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h @@ -59,7 +59,7 @@ #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'" #endif -#define BOARD_NAME "Gen7 Custom" +#define BOARD_INFO_NAME "Gen7 Custom" // // Limit Switches diff --git a/Marlin/src/pins/sanguino/pins_MELZI.h b/Marlin/src/pins/sanguino/pins_MELZI.h index e4dcc4277..1ccf5ac06 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI.h +++ b/Marlin/src/pins/sanguino/pins_MELZI.h @@ -25,8 +25,8 @@ * Melzi pin assignments */ -#ifndef BOARD_NAME - #define BOARD_NAME "Melzi" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Melzi" #endif #define IS_MELZI diff --git a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h index 2d08dbc55..3052daba9 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h @@ -31,7 +31,7 @@ * See http://www.instructables.com/id/Burn-Arduino-Bootloader-with-Arduino-MEGA/ */ -#define BOARD_NAME "Melzi (Creality)" +#define BOARD_INFO_NAME "Melzi (Creality)" #include "pins_MELZI.h" diff --git a/Marlin/src/pins/sanguino/pins_MELZI_MAKR3D.h b/Marlin/src/pins/sanguino/pins_MELZI_MAKR3D.h index a9124245c..ef1f1332c 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_MAKR3D.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_MAKR3D.h @@ -25,5 +25,5 @@ * Melzi with ATmega1284 (MaKr3d version) pin assignments */ -#define BOARD_NAME "Melzi (ATmega1284)" +#define BOARD_INFO_NAME "Melzi (ATmega1284)" #include "pins_MELZI.h" diff --git a/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h b/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h index 99671d671..eab994081 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h @@ -25,7 +25,7 @@ * Melzi (Malyan M150) pin assignments */ -#define BOARD_NAME "Melzi (Malyan)" +#define BOARD_INFO_NAME "Melzi (Malyan)" #include "pins_MELZI.h" #undef LCD_SDSS diff --git a/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h b/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h index bb8e2e324..b49f94998 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h @@ -25,7 +25,7 @@ * Melzi pin assignments */ -#define BOARD_NAME "Melzi (Tronxy)" +#define BOARD_INFO_NAME "Melzi (Tronxy)" #include "pins_MELZI.h" #undef Z_ENABLE_PIN diff --git a/Marlin/src/pins/sanguino/pins_OMCA.h b/Marlin/src/pins/sanguino/pins_OMCA.h index b4b23b790..8c5048357 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA.h +++ b/Marlin/src/pins/sanguino/pins_OMCA.h @@ -81,7 +81,7 @@ #error "Oops! Select 'Sanguino' in 'Tools > Board' and 'ATmega644' or 'ATmega644P' in 'Tools > Processor.'" #endif -#define BOARD_NAME "Final OMCA" +#define BOARD_INFO_NAME "Final OMCA" // // Limit Switches diff --git a/Marlin/src/pins/sanguino/pins_OMCA_A.h b/Marlin/src/pins/sanguino/pins_OMCA_A.h index 63eb36262..94a186241 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA_A.h +++ b/Marlin/src/pins/sanguino/pins_OMCA_A.h @@ -80,7 +80,7 @@ #error "Oops! Select 'Sanguino' in 'Tools > Board' and ATmega644 in 'Tools > Processor.'" #endif -#define BOARD_NAME "Alpha OMCA" +#define BOARD_INFO_NAME "Alpha OMCA" // // Limit Switches diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h index 978a21d2e..0b119a422 100644 --- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h +++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h @@ -56,8 +56,8 @@ #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'" #endif -#ifndef BOARD_NAME - #define BOARD_NAME "Sanguinololu <1.2" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Sanguinololu <1.2" #endif // diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_12.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_12.h index 3ef9e1c95..f4b05e4f6 100644 --- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_12.h +++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_12.h @@ -34,8 +34,8 @@ * STB_11 */ -#ifndef BOARD_NAME - #define BOARD_NAME "Sanguinololu 1.2" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Sanguinololu 1.2" #endif #define SANGUINOLOLU_V_1_2 diff --git a/Marlin/src/pins/sanguino/pins_SETHI.h b/Marlin/src/pins/sanguino/pins_SETHI.h index 23b985fba..79c3209b4 100644 --- a/Marlin/src/pins/sanguino/pins_SETHI.h +++ b/Marlin/src/pins/sanguino/pins_SETHI.h @@ -54,7 +54,7 @@ #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644', 'ATmega644P', or 'ATmega1284P' in 'Tools > Processor.'" #endif -#define BOARD_NAME "Sethi 3D_1" +#define BOARD_INFO_NAME "Sethi 3D_1" #ifndef GEN7_VERSION #define GEN7_VERSION 12 // v1.x diff --git a/Marlin/src/pins/sanguino/pins_STB_11.h b/Marlin/src/pins/sanguino/pins_STB_11.h index 511b938c4..9a7985346 100644 --- a/Marlin/src/pins/sanguino/pins_STB_11.h +++ b/Marlin/src/pins/sanguino/pins_STB_11.h @@ -25,6 +25,6 @@ * STB V1.1 pin assignments */ -#define BOARD_NAME "STB V1.1" +#define BOARD_INFO_NAME "STB V1.1" #include "pins_SANGUINOLOLU_12.h" diff --git a/Marlin/src/pins/stm32/pins_ARMED.h b/Marlin/src/pins/stm32/pins_ARMED.h index ea1c11f39..495654a82 100644 --- a/Marlin/src/pins/stm32/pins_ARMED.h +++ b/Marlin/src/pins/stm32/pins_ARMED.h @@ -31,9 +31,9 @@ #define ARMED_V1_1 #endif -#undef BOARD_NAME // Defined on the command line by Arduino Core STM32 -#define BOARD_NAME "Arm'ed" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#undef BOARD_INFO_NAME // Defined on the command line by Arduino Core STM32 +#define BOARD_INFO_NAME "Arm'ed" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #define I2C_EEPROM diff --git a/Marlin/src/pins/stm32/pins_BEAST.h b/Marlin/src/pins/stm32/pins_BEAST.h index 44204f0c9..7b1f61d91 100644 --- a/Marlin/src/pins/stm32/pins_BEAST.h +++ b/Marlin/src/pins/stm32/pins_BEAST.h @@ -29,7 +29,7 @@ * 21017 Victor Perez Marlin for stm32f1 test */ -#define BOARD_NAME "Beast STM32" +#define BOARD_INFO_NAME "Beast STM32" #define DEFAULT_MACHINE_NAME "STM32F103RET6" // Enable I2C_EEPROM for testing @@ -142,7 +142,7 @@ #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) #define BEEPER_PIN 33 - // Buttons are attached to a shift register + // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 //#define SHIFT_LD 42 @@ -254,7 +254,7 @@ // Beeper on AUX-4 #define BEEPER_PIN 33 - // buttons are directly attached to AUX-2 + // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) #define BTN_EN1 64 #define BTN_EN2 59 diff --git a/Marlin/src/pins/stm32/pins_BIGTREE_BTT002_V1.0.h b/Marlin/src/pins/stm32/pins_BIGTREE_BTT002_V1.0.h new file mode 100644 index 000000000..a66a2b8a2 --- /dev/null +++ b/Marlin/src/pins/stm32/pins_BIGTREE_BTT002_V1.0.h @@ -0,0 +1,254 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#ifndef TARGET_STM32F4 + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#elif HOTENDS > 3 || E_STEPPERS > 3 + #error "BIGTREE SKR Pro V1.1 supports up to 3 hotends / E-steppers." +#endif + +#define BOARD_INFO_NAME "BIGTREE Btt002 1.0" + +#define SRAM_EEPROM_EMULATION + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +// +// Servos +// +#define SERVO0_PIN PC3 + +// +// Limit Switches +// +#define X_MIN_PIN PD3 +#define X_MAX_PIN PD3 +#define Y_MIN_PIN PD2 +#define Y_MAX_PIN PD2 +#define Z_MIN_PIN PD1 +#define Z_MAX_PIN PD1 + +// +// Z Probe must be this pins ## +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN PD1 +#endif + +// +// Steppers +// +#define X_STEP_PIN PA9 +#define X_DIR_PIN PA10 +#define X_ENABLE_PIN PA8 +#ifndef X_CS_PIN + #define X_CS_PIN PE2 +#endif + +#define Y_STEP_PIN PC8 +#define Y_DIR_PIN PC9 +#define Y_ENABLE_PIN PC7 + #ifndef Y_CS_PIN + #define Y_CS_PIN PE3 +#endif + +#define Z_STEP_PIN PD15 +#define Z_DIR_PIN PC6 +#define Z_ENABLE_PIN PD14 +#ifndef Z_CS_PIN + #define Z_CS_PIN PE4 +#endif + +#define E0_STEP_PIN PD12 +#define E0_DIR_PIN PD13 +#define E0_ENABLE_PIN PD11 +#ifndef E0_CS_PIN + #define E0_CS_PIN PD7 +#endif + +/* +//SKR_PRO_V1.1 +#define E1_STEP_PIN PD15 +#define E1_DIR_PIN PE7 +#define E1_ENABLE_PIN PA3 +#ifndef E1_CS_PIN + #define E1_CS_PIN PG15 +#endif + +#define E2_STEP_PIN PD13 +#define E2_DIR_PIN PG9 +#define E2_ENABLE_PIN PF0 +#ifndef E2_CS_PIN + #define E2_CS_PIN PG12 +#endif +*/ +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI PB15 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO PB14 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK PB13 + #endif +#endif + +#if HAS_TMC220x + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + // + // Software serial ## + // + #define X_SERIAL_TX_PIN PE2 + #define X_SERIAL_RX_PIN PE2 + + #define Y_SERIAL_TX_PIN PE3 + #define Y_SERIAL_RX_PIN PE3 + + #define Z_SERIAL_TX_PIN PE4 + #define Z_SERIAL_RX_PIN PE4 + + #define E0_SERIAL_TX_PIN PD7 + #define E0_SERIAL_RX_PIN PD7 + + //#define E1_SERIAL_TX_PIN PD1 + //#define E1_SERIAL_RX_PIN PD1 + + //#define E2_SERIAL_TX_PIN PD6 + //#define E2_SERIAL_RX_PIN PD6 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA2 // T1 <-> E0 +#define TEMP_1_PIN PA0 // T2 <-> E1 +//#define TEMP_2_PIN PC2 // T3 <-> E2 SKR_PRO +#define TEMP_BED_PIN PA1 // T0 <-> Bed + +// +// Heaters / Fans +// +#define HEATER_0_PIN PE6 // Heater0 +//#define HEATER_1_PIN PD14 // Heater1 +//#define HEATER_2_PIN PB0 // Heater1 +#define HEATER_BED_PIN PE5 // Hotbed +#define FAN_PIN PB9 // Fan0 +#define FAN1_PIN PB8 // Fan1 +//#define FAN2_PIN PE6 // Fan2 + +// HAL SPI pins group +#define SCK_PIN PA5 // SPI SCLK +#define MYSSEL PA4 // SPI SSEL +#define MISO_PIN PA6 // SPI MISO +#define MOSI_PIN PA7 // SPI MOSI + +// +// Misc. Functions +// +#define SDSS PA4 + +/** + * -------------------------------------SKR_MK3----------------------------------------------- + * _____ _____ | + * PA3 | · · | GND 5V | · · | GND | + * NRESET | · · | PC4(SD_DET) (LCD_D7) PE13 | · · | PE12 (LCD_D6) | + * (MOSI)PA7 | · · | PB0(BTN_EN2) (LCD_D5) PE11 | · · | PE10 (LCD_D4) | + * (SD_SS)PA4 | · · | PC5(BTN_EN1) (LCD_RS) PE8 | · · | PE9 (LCD_EN) | + * (SCK)PA5 | · · | PA6(MISO) (BTN_ENC) PB1 | · · | PE7 (BEEPER) | + * ￣￣ ￣￣ | + * EXP2 EXP1 | + * --------------------------------------------------------------------------------------------- + */ +// +// LCDs and Controllers +// +#if HAS_SPI_LCD + #define BEEPER_PIN PE7 + #define BTN_ENC PB1 + + #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS PE12 + + #define BTN_EN1 PE9 + #define BTN_EN2 PE10 + + #define LCD_PINS_ENABLE PE13 + #define LCD_PINS_D4 PE11 + + #else + + #define LCD_PINS_RS PE8 + + #define BTN_EN1 PC5 + #define BTN_EN2 PB0 + #define SD_DETECT_PIN PC4 + + #define LCD_SDSS PA4 + + #define LCD_PINS_ENABLE PE9 + #define LCD_PINS_D4 PE10 + + #if ENABLED(ULTIPANEL) + #define LCD_PINS_D5 PE11 + #define LCD_PINS_D6 PE12 + #define LCD_PINS_D7 PE13 + #endif + + #endif + + // Alter timing for graphical display + #if HAS_GRAPHICAL_LCD + #ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(600) + #endif + #endif + +#endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/stm32/pins_BIGTREE_SKR_E3_DIP.h b/Marlin/src/pins/stm32/pins_BIGTREE_SKR_E3_DIP.h index dc2cd1ce6..0c5d88354 100644 --- a/Marlin/src/pins/stm32/pins_BIGTREE_SKR_E3_DIP.h +++ b/Marlin/src/pins/stm32/pins_BIGTREE_SKR_E3_DIP.h @@ -25,7 +25,7 @@ #error "Oops! Select an STM32F1 board in 'Tools > Board.'" #endif -#define BOARD_NAME "BIGTREE SKR E3 DIP V1.0" +#define BOARD_INFO_NAME "BIGTREE SKR E3 DIP V1.0" // Release PB3/PB4 (TMC_SW Pins) from JTAG pins #define DISABLE_JTAG diff --git a/Marlin/src/pins/stm32/pins_BIGTREE_SKR_MINI_E3.h b/Marlin/src/pins/stm32/pins_BIGTREE_SKR_MINI_E3.h index 57331e65f..56dc84118 100644 --- a/Marlin/src/pins/stm32/pins_BIGTREE_SKR_MINI_E3.h +++ b/Marlin/src/pins/stm32/pins_BIGTREE_SKR_MINI_E3.h @@ -25,7 +25,7 @@ #error "Oops! Select an STM32F1 board in 'Tools > Board.'" #endif -#define BOARD_NAME "BIGTREE SKR Mini E3" +#define BOARD_INFO_NAME "BIGTREE SKR Mini E3" // Release PB3/PB4 (E0 STP/DIR) from JTAG pins #define DISABLE_JTAG diff --git a/Marlin/src/pins/stm32/pins_BIGTREE_SKR_MINI_V1_1.h b/Marlin/src/pins/stm32/pins_BIGTREE_SKR_MINI_V1_1.h index cabfc254f..3d7f8d98d 100644 --- a/Marlin/src/pins/stm32/pins_BIGTREE_SKR_MINI_V1_1.h +++ b/Marlin/src/pins/stm32/pins_BIGTREE_SKR_MINI_V1_1.h @@ -25,7 +25,7 @@ #error "Oops! Select an STM32F1 board in 'Tools > Board.'" #endif -#define BOARD_NAME "BIGTREE SKR Mini 1.1" +#define BOARD_INFO_NAME "BIGTREE SKR Mini 1.1" //#define DISABLE_DEBUG #define DISABLE_JTAG @@ -191,3 +191,8 @@ #ifndef ST7920_DELAY_3 #define ST7920_DELAY_3 DELAY_NS(125) #endif + +#define FLASH_EEPROM_EMULATION +#define EEPROM_PAGE_SIZE (0x800) // 2KB +#define EEPROM_START_ADDRESS (0x8000000 + (256 * 1024) - 2 * EEPROM_PAGE_SIZE) +#define E2END (EEPROM_PAGE_SIZE - 1) diff --git a/Marlin/src/pins/stm32/pins_BIGTREE_SKR_PRO_V1.1.h b/Marlin/src/pins/stm32/pins_BIGTREE_SKR_PRO_V1.1.h index 840bbb8ee..89e7fe73e 100644 --- a/Marlin/src/pins/stm32/pins_BIGTREE_SKR_PRO_V1.1.h +++ b/Marlin/src/pins/stm32/pins_BIGTREE_SKR_PRO_V1.1.h @@ -27,7 +27,7 @@ #error "BIGTREE SKR Pro V1.1 supports up to 3 hotends / E-steppers." #endif -#define BOARD_NAME "BIGTREE SKR Pro 1.1" +#define BOARD_INFO_NAME "BIGTREE SKR Pro 1.1" // redefined? // Use one of these or SDCard-based Emulation will be used //#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation diff --git a/Marlin/src/pins/stm32/pins_BLACK_STM32F407VE.h b/Marlin/src/pins/stm32/pins_BLACK_STM32F407VE.h index 3edc77460..0e405608d 100644 --- a/Marlin/src/pins/stm32/pins_BLACK_STM32F407VE.h +++ b/Marlin/src/pins/stm32/pins_BLACK_STM32F407VE.h @@ -33,8 +33,8 @@ #error "Black STM32F4VET6 supports up to 2 hotends / E-steppers." #endif -#ifndef BOARD_NAME - #define BOARD_NAME "Black STM32F4VET6" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Black STM32F4VET6" #endif #define DEFAULT_MACHINE_NAME "STM32F407VET6" diff --git a/Marlin/src/pins/stm32/pins_CHITU3D.h b/Marlin/src/pins/stm32/pins_CHITU3D.h index 7a42dc9e4..48b57b350 100644 --- a/Marlin/src/pins/stm32/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32/pins_CHITU3D.h @@ -29,7 +29,7 @@ * 2017 Victor Perez Marlin for stm32f1 test */ -#define BOARD_NAME "Chitu3D" +#define BOARD_INFO_NAME "Chitu3D" #define DEFAULT_MACHINE_NAME "STM32F103RET6" // Enable I2C_EEPROM for testing @@ -141,12 +141,12 @@ #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) #define BEEPER_PIN 33 - // Buttons are attached to a shift register + // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 #endif #endif @@ -252,7 +252,7 @@ // Beeper on AUX-4 #define BEEPER_PIN 33 - // buttons are directly attached to AUX-2 + // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) #define BTN_EN1 64 #define BTN_EN2 59 diff --git a/Marlin/src/pins/stm32/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32/pins_FYSETC_AIO_II.h index ed44f9471..5d30aaec3 100644 --- a/Marlin/src/pins/stm32/pins_FYSETC_AIO_II.h +++ b/Marlin/src/pins/stm32/pins_FYSETC_AIO_II.h @@ -25,8 +25,8 @@ #error "Oops! Select an STM32F1 board in 'Tools > Board.'" #endif -#define BOARD_NAME "FYSETC AIO II" -#define BOARD_WEBSITE_URL "https://fysetc.com" +#define BOARD_INFO_NAME "FYSETC AIO II" +#define BOARD_WEBSITE_URL "fysetc.com" #define DISABLE_JTAG @@ -137,7 +137,7 @@ #define DOGLCD_CS PB7 #endif - //#define LCD_CONTRAST 190 + //#define LCD_CONTRAST_INIT 190 //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 diff --git a/Marlin/src/pins/stm32/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32/pins_FYSETC_CHEETAH.h index e3aac9e84..8fee5d23b 100644 --- a/Marlin/src/pins/stm32/pins_FYSETC_CHEETAH.h +++ b/Marlin/src/pins/stm32/pins_FYSETC_CHEETAH.h @@ -27,14 +27,20 @@ #define DEFAULT_MACHINE_NAME "3D Printer" -#define BOARD_NAME "FYSETC Cheetah" -#define BOARD_WEBSITE_URL "https://fysetc.com" +#define BOARD_INFO_NAME "FYSETC Cheetah" +#define BOARD_WEBSITE_URL "fysetc.com" // Ignore temp readings during development. //#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 #define DISABLE_JTAG +#define FLASH_EEPROM_EMULATION +#define EEPROM_PAGE_SIZE uint16(0x800) // 2KB +#define EEPROM_START_ADDRESS uint32(0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE) +#undef E2END +#define E2END (EEPROM_PAGE_SIZE - 1) // 2KB + // // Servos // @@ -134,7 +140,7 @@ #define RGB_LED_B_PIN PB6 #endif - //#define LCD_CONTRAST 190 + //#define LCD_CONTRAST_INIT 190 #if ENABLED(NEWPANEL) #define BTN_EN1 PC11 diff --git a/Marlin/src/pins/stm32/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32/pins_GTM32_PRO_VB.h index c2f5cbc5e..95a90e753 100644 --- a/Marlin/src/pins/stm32/pins_GTM32_PRO_VB.h +++ b/Marlin/src/pins/stm32/pins_GTM32_PRO_VB.h @@ -30,7 +30,7 @@ #error "Oops! Select an STM32F1 board in 'Tools > Board.'" #endif -#define BOARD_NAME "GTM32 Pro VB" +#define BOARD_INFO_NAME "GTM32 Pro VB" #define DEFAULT_MACHINE_NAME "STM32F103VET6" //#define DISABLE_DEBUG diff --git a/Marlin/src/pins/stm32/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32/pins_JGAURORA_A5S_A1.h index e9a86e27c..51c1e8f79 100644 --- a/Marlin/src/pins/stm32/pins_JGAURORA_A5S_A1.h +++ b/Marlin/src/pins/stm32/pins_JGAURORA_A5S_A1.h @@ -33,7 +33,7 @@ #elif HOTENDS > 1 || E_STEPPERS > 1 #error "JGAurora 32-bit board only supports 1 hotend / E-stepper. Comment out this line to continue." #endif -#define BOARD_NAME "JGAurora A5S A1 board" +#define BOARD_INFO_NAME "JGAurora A5S A1 board" #define STM32_XL_DENSITY // #define MCU_STM32F103ZE // not yet required diff --git a/Marlin/src/pins/stm32/pins_LONGER3D_LK.h b/Marlin/src/pins/stm32/pins_LONGER3D_LK.h index 9c9806cb2..5862449e8 100644 --- a/Marlin/src/pins/stm32/pins_LONGER3D_LK.h +++ b/Marlin/src/pins/stm32/pins_LONGER3D_LK.h @@ -28,7 +28,7 @@ #error "Longer3D board only supports 1 hotend / E-stepper. Comment out this line to continue." #endif -#define BOARD_NAME "Longer3D" +#define BOARD_INFO_NAME "Longer3D" #define ALFAWISE_UX0 // Common to all Longer3D STM32F1 boards (used for Open drain mosfets) //#define DISABLE_DEBUG // We still want to debug with STLINK... @@ -94,12 +94,16 @@ #define LED_PIN PC2 // pin 17 // -// PWM +// PWM for a servo probe +// Other servo devices are not supported on this board! // -#define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V) -#define SERVO0_PWM_OD // Comment this if using PE5 +#if HAS_Z_SERVO_PROBE + #define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V) + #define SERVO0_PWM_OD // Comment this if using PE5 -//#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0) + //#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0) + //#undef Z_MAX_PIN // Uncomment if using ZMAX connector (PE5) +#endif /** * Note: Alfawise screens use various TFT controllers. Supported screens @@ -139,16 +143,27 @@ #endif // -// SPI1 (EEPROM W25Q64 + DAC OUT) +// Persistent Storage +// If no option is selected below the SD Card will be used // +//#define SPI_EEPROM +#define FLASH_EEPROM_EMULATION + #undef E2END -#define E2END 0x7FF // EEPROM end address (reserve 2kB on sd/sram, real spi one is 8MB/64Mbits) -/* -#define SPI_EEPROM 1 // If commented this will create a file on the SD card as a replacement -#define SPI_CHAN_EEPROM1 1 -#define SPI_EEPROM1_CS PC5 // pin 34 - -//#define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30 -//#define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31 -//#define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32 -*/ +#if ENABLED(SPI_EEPROM) + // SPI1 EEPROM Winbond W25Q64 (8MB/64Mbits) + #define SPI_CHAN_EEPROM1 1 + #define SPI_EEPROM1_CS PC5 // pin 34 + #define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30 + #define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31 + #define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32 + #define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet) + #define E2END ((16 * EEPROM_PAGE_SIZE)-1) // Limit to 64KB for now... +#elif ENABLED(FLASH_EEPROM_EMULATION) + // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) + #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) + #define E2END (EEPROM_PAGE_SIZE - 1) +#else + #define E2END (0x7FFU) // On SD, Limit to 2KB, require this amount of RAM +#endif diff --git a/Marlin/src/pins/stm32/pins_MALYAN_M200.h b/Marlin/src/pins/stm32/pins_MALYAN_M200.h index 0d15441ad..646cb0b37 100644 --- a/Marlin/src/pins/stm32/pins_MALYAN_M200.h +++ b/Marlin/src/pins/stm32/pins_MALYAN_M200.h @@ -29,7 +29,7 @@ #error "Oops! You must be compiling for STM32." #endif -#define BOARD_NAME "Malyan M200" +#define BOARD_INFO_NAME "Malyan M200" // Enable EEPROM Emulation for this board // This setting should probably be in configuration.h diff --git a/Marlin/src/pins/stm32/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32/pins_MKS_ROBIN.h index 1cd120091..7623f3fe2 100644 --- a/Marlin/src/pins/stm32/pins_MKS_ROBIN.h +++ b/Marlin/src/pins/stm32/pins_MKS_ROBIN.h @@ -31,7 +31,7 @@ #error "MKS Robin supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "MKS Robin" +#define BOARD_INFO_NAME "MKS Robin" // // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role diff --git a/Marlin/src/pins/stm32/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32/pins_MKS_ROBIN_LITE.h index 9a6901d17..d8870f9bf 100644 --- a/Marlin/src/pins/stm32/pins_MKS_ROBIN_LITE.h +++ b/Marlin/src/pins/stm32/pins_MKS_ROBIN_LITE.h @@ -29,10 +29,10 @@ #error "MKS Robin Lite supports up to 1 hotends / E-steppers. Comment out this line to continue." #endif -#ifndef BOARD_NAME - #define BOARD_NAME "MKS Robin Lite" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "MKS Robin Lite" #endif -#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks" +#define BOARD_WEBSITE_URL "github.com/makerbase-mks" //#define DISABLE_DEBUG #define DISABLE_JTAG diff --git a/Marlin/src/pins/stm32/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32/pins_MKS_ROBIN_MINI.h index 131ee4b02..7be36b61f 100755 --- a/Marlin/src/pins/stm32/pins_MKS_ROBIN_MINI.h +++ b/Marlin/src/pins/stm32/pins_MKS_ROBIN_MINI.h @@ -31,7 +31,7 @@ #error "MKS Robin mini supports up to 1 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "MKS Robin mini" +#define BOARD_INFO_NAME "MKS Robin mini" // // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role diff --git a/Marlin/src/pins/stm32/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32/pins_MKS_ROBIN_NANO.h index eb5d8a736..dab92328b 100755 --- a/Marlin/src/pins/stm32/pins_MKS_ROBIN_NANO.h +++ b/Marlin/src/pins/stm32/pins_MKS_ROBIN_NANO.h @@ -31,7 +31,7 @@ #error "MKS Robin nano supports up to 2 hotends / E-steppers. Comment out this line to continue." #endif -#define BOARD_NAME "MKS Robin nano" +#define BOARD_INFO_NAME "MKS Robin nano" // // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role diff --git a/Marlin/src/pins/stm32/pins_MORPHEUS.h b/Marlin/src/pins/stm32/pins_MORPHEUS.h index fe9c9dce3..fd4da1ab7 100644 --- a/Marlin/src/pins/stm32/pins_MORPHEUS.h +++ b/Marlin/src/pins/stm32/pins_MORPHEUS.h @@ -34,7 +34,7 @@ #error "Oops! Select an STM32F1 board in 'Tools > Board.'" #endif -#define BOARD_NAME "Bluepill based board" +#define BOARD_INFO_NAME "Bluepill based board" // // Limit Switches diff --git a/Marlin/src/pins/stm32/pins_REMRAM_V1.h b/Marlin/src/pins/stm32/pins_REMRAM_V1.h index 6e72bdc2e..aa9d6ea17 100644 --- a/Marlin/src/pins/stm32/pins_REMRAM_V1.h +++ b/Marlin/src/pins/stm32/pins_REMRAM_V1.h @@ -25,7 +25,7 @@ #error "Oops! Select an STM32F7 board in 'Tools > Board.'" #endif -#define BOARD_NAME "RemRam v1" +#define BOARD_INFO_NAME "RemRam v1" #define DEFAULT_MACHINE_NAME "RemRam" #define SRAM_EEPROM_EMULATION // Emulate the EEPROM using Backup SRAM diff --git a/Marlin/src/pins/stm32/pins_RUMBA32.h b/Marlin/src/pins/stm32/pins_RUMBA32.h index 5ac70744f..26b4540c2 100644 --- a/Marlin/src/pins/stm32/pins_RUMBA32.h +++ b/Marlin/src/pins/stm32/pins_RUMBA32.h @@ -28,8 +28,8 @@ #endif #define RUMBA32_V1_0 -#define BOARD_NAME "RUMBA32" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "RUMBA32" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME //#define I2C_EEPROM #define E2END 0xFFF // 4KB diff --git a/Marlin/src/pins/stm32/pins_STM32F1R.h b/Marlin/src/pins/stm32/pins_STM32F1R.h index 7b3e91047..ccafcad1f 100644 --- a/Marlin/src/pins/stm32/pins_STM32F1R.h +++ b/Marlin/src/pins/stm32/pins_STM32F1R.h @@ -29,7 +29,7 @@ * 21017 Victor Perez Marlin for stm32f1 test */ -#define BOARD_NAME "Misc. STM32F1R" +#define BOARD_INFO_NAME "Misc. STM32F1R" #define DEFAULT_MACHINE_NAME "STM32F103RET6" // Ignore temp readings during development. @@ -119,7 +119,7 @@ #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) #define BEEPER_PIN 33 - // Buttons are attached to a shift register + // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 //#define SHIFT_LD 42 @@ -230,7 +230,7 @@ // Beeper on AUX-4 #define BEEPER_PIN 33 - // buttons are directly attached to AUX-2 + // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) #define BTN_EN1 64 #define BTN_EN2 59 diff --git a/Marlin/src/pins/stm32/pins_STM32F4.h b/Marlin/src/pins/stm32/pins_STM32F4.h index 23c5b3c11..43875ac3b 100644 --- a/Marlin/src/pins/stm32/pins_STM32F4.h +++ b/Marlin/src/pins/stm32/pins_STM32F4.h @@ -27,7 +27,7 @@ #error "STM32F4 supports up to 2 hotends / E-steppers." #endif -#define BOARD_NAME "Misc. STM32F4" +#define BOARD_INFO_NAME "Misc. STM32F4" #define DEFAULT_MACHINE_NAME "STM32F407VET6" //#define I2C_EEPROM diff --git a/Marlin/src/pins/stm32/pins_STM3R_MINI.h b/Marlin/src/pins/stm32/pins_STM3R_MINI.h index 5ababb36b..9192ae453 100644 --- a/Marlin/src/pins/stm32/pins_STM3R_MINI.h +++ b/Marlin/src/pins/stm32/pins_STM3R_MINI.h @@ -29,8 +29,8 @@ * 21017 Victor Perez Marlin for stm32f1 test */ -#define BOARD_NAME "STM3R Mini" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "STM3R Mini" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME // Enable I2C_EEPROM for testing #define I2C_EEPROM @@ -134,7 +134,7 @@ #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) #define BEEPER_PIN 33 - // Buttons are attached to a shift register + // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 //#define SHIFT_LD 42 @@ -254,7 +254,7 @@ // Beeper on AUX-4 #define BEEPER_PIN 33 - // buttons are directly attached to AUX-2 + // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) #define BTN_EN1 64 #define BTN_EN2 59 diff --git a/Marlin/src/pins/stm32/pins_THE_BORG.h b/Marlin/src/pins/stm32/pins_THE_BORG.h index 8069076e5..1f8569e4e 100644 --- a/Marlin/src/pins/stm32/pins_THE_BORG.h +++ b/Marlin/src/pins/stm32/pins_THE_BORG.h @@ -27,8 +27,8 @@ #error "The-Borg supports up to 3 hotends / E-steppers." #endif -#define BOARD_NAME "The-Borge" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "The-Borge" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #define E2END 0xFFF // EEPROM end address diff --git a/Marlin/src/pins/teensy2/pins_5DPRINT.h b/Marlin/src/pins/teensy2/pins_5DPRINT.h index 27e26e242..80c697527 100755 --- a/Marlin/src/pins/teensy2/pins_5DPRINT.h +++ b/Marlin/src/pins/teensy2/pins_5DPRINT.h @@ -73,7 +73,7 @@ #endif #define DEFAULT_MACHINE_NAME "Makibox" -#define BOARD_NAME "5DPrint D8" +#define BOARD_INFO_NAME "5DPrint D8" // // Servos diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h index c254aa89f..3c38ad0b0 100644 --- a/Marlin/src/pins/teensy2/pins_BRAINWAVE.h +++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h @@ -72,7 +72,7 @@ #error "Oops! Select 'AT90USB646_TEENSYPP' in 'Tools > Board.'" #endif -#define BOARD_NAME "Brainwave" +#define BOARD_INFO_NAME "Brainwave" // // Limit Switches diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h index 920d02f15..cd4dd3369 100644 --- a/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h +++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h @@ -79,7 +79,7 @@ #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" #endif -#define BOARD_NAME "Brainwave Pro" +#define BOARD_INFO_NAME "Brainwave Pro" // // Limit Switches diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h index eef617fe8..6f6ba5b8c 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h @@ -66,7 +66,7 @@ #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" #endif -#define BOARD_NAME "Printrboard" +#define BOARD_INFO_NAME "Printrboard" // Disable JTAG pins so they can be used for the Extrudrboard #define DISABLE_JTAG diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h index 096283e4c..90c31132a 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h @@ -71,7 +71,7 @@ #error "USBCON should be defined by the platform for this board." #endif -#define BOARD_NAME "Printrboard Rev.F" +#define BOARD_INFO_NAME "Printrboard Rev.F" // Disable JTAG pins so EXP1 pins work correctly // (Its pins are used for the Extrudrboard and filament sensor, for example). diff --git a/Marlin/src/pins/teensy2/pins_SAV_MKI.h b/Marlin/src/pins/teensy2/pins_SAV_MKI.h index 17928cd13..1ae186ab5 100644 --- a/Marlin/src/pins/teensy2/pins_SAV_MKI.h +++ b/Marlin/src/pins/teensy2/pins_SAV_MKI.h @@ -66,8 +66,8 @@ #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" #endif -#define BOARD_NAME "SAV MkI" -#define DEFAULT_MACHINE_NAME BOARD_NAME +#define BOARD_INFO_NAME "SAV MkI" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #define DEFAULT_SOURCE_CODE_URL "https://tinyurl.com/onru38b" // diff --git a/Marlin/src/pins/teensy2/pins_TEENSY2.h b/Marlin/src/pins/teensy2/pins_TEENSY2.h index 572cb0707..a91a01912 100644 --- a/Marlin/src/pins/teensy2/pins_TEENSY2.h +++ b/Marlin/src/pins/teensy2/pins_TEENSY2.h @@ -111,7 +111,7 @@ #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" #endif -#define BOARD_NAME "Teensy++2.0" +#define BOARD_INFO_NAME "Teensy++2.0" // // Limit Switches diff --git a/Marlin/src/pins/teensy2/pins_TEENSYLU.h b/Marlin/src/pins/teensy2/pins_TEENSYLU.h index c61e751c8..5fde57180 100755 --- a/Marlin/src/pins/teensy2/pins_TEENSYLU.h +++ b/Marlin/src/pins/teensy2/pins_TEENSYLU.h @@ -77,7 +77,7 @@ #error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'" #endif -#define BOARD_NAME "Teensylu" +#define BOARD_INFO_NAME "Teensylu" // // Limit Switch definitions that match the SCHEMATIC diff --git a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h index 7eb57bc08..a68b9e31c 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h @@ -31,8 +31,8 @@ #error "Oops! Select 'Teensy 3.1' or 'Teensy 3.2' in 'Tools > Board.'" #endif -#ifndef BOARD_NAME - #define BOARD_NAME "Teensy3.2" +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Teensy3.2" #endif #define AT90USB 1286 // Disable MarlinSerial etc. diff --git a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h index 922eeb9fa..b0f0e4d47 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h @@ -32,9 +32,9 @@ #endif #if IS_TEENSY35 - #define BOARD_NAME "Teensy3.5" + #define BOARD_INFO_NAME "Teensy3.5" #elif IS_TEENSY36 - #define BOARD_NAME "Teensy3.6" + #define BOARD_INFO_NAME "Teensy3.6" #endif #define AT90USB 1286 // Disable MarlinSerial etc. diff --git a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json new file mode 100644 index 000000000..95de3a6bc --- /dev/null +++ b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json @@ -0,0 +1,65 @@ +{ + "build": { + "core": "stm32", + "cpu": "cortex-m4", + "extra_flags": "-DSTM32F407xx", + "f_cpu": "168000000L", + "hwids": [ + [ + "0x1EAF", + "0x0003" + ], + [ + "0x0483", + "0x3748" + ] + ], + "ldscript": "stm32f407xg.ld", + "mcu": "stm32f407vet6", + "variant": "BIGTREE_GENERIC_STM32F407_5X" + }, + "debug": { + "jlink_device": "STM32F407VE", + "openocd_target": "stm32f4x", + "svd_path": "STM32F40x.svd", + "tools": { + "stlink": { + "server": { + "arguments": [ + "-f", + "scripts/interface/stlink.cfg", + "-c", + "transport select hla_swd", + "-f", + "scripts/target/stm32f4x.cfg", + "-c", + "reset_config none" + ], + "executable": "bin/openocd", + "package": "tool-openocd" + } + } + } + }, + "frameworks": [ + "arduino", + "stm32cube" + ], + "name": "STM32F407VE (64k RAM. 512k Flash)", + "upload": { + "disable_flushing": false, + "maximum_ram_size": 65536, + "maximum_size": 524288, + "protocol": "stlink", + "protocols": [ + "stlink", + "dfu", + "jlink" + ], + "require_upload_port": true, + "use_1200bps_touch": false, + "wait_for_upload_port": false + }, + "url": "http://www.st.com/en/microcontrollers/stm32f407zg.html", + "vendor": "Generic" +} diff --git a/buildroot/share/PlatformIO/scripts/alfawise_Ux0.py b/buildroot/share/PlatformIO/scripts/alfawise_Ux0.py index 055f95cc7..e2716a76b 100644 --- a/buildroot/share/PlatformIO/scripts/alfawise_Ux0.py +++ b/buildroot/share/PlatformIO/scripts/alfawise_Ux0.py @@ -7,7 +7,7 @@ for define in env['CPPDEFINES']: env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08010000")) env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/alfawise_Ux0.ld") -# Encrypt ${PROGNAME}.bin and save it as 'project.bin' +# Rename ${PROGNAME}.bin and save it as 'project.bin' (No encryption on the Longer3D) def encrypt(source, target, env): import os @@ -23,4 +23,5 @@ def encrypt(source, target, env): finally: firmware.close() marlin_alfa.close() -env.AddPostAction('"$BUILD_DIR/${PROGNAME}.bin"', encrypt); + +env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); diff --git a/buildroot/share/PlatformIO/scripts/fysetc_STM32F1.py b/buildroot/share/PlatformIO/scripts/fysetc_STM32F1.py index c34b92145..845e582f7 100644 --- a/buildroot/share/PlatformIO/scripts/fysetc_STM32F1.py +++ b/buildroot/share/PlatformIO/scripts/fysetc_STM32F1.py @@ -12,7 +12,7 @@ env.AddPostAction( join("$BUILD_DIR","${PROGNAME}.elf"), env.VerboseAction(" ".join([ "$OBJCOPY", "-O ihex", "$TARGET", # TARGET=.pio/build/fysetc_STM32F1/firmware.elf - "'" + join("$BUILD_DIR","${PROGNAME}.hex") + "'", # Note: $BUILD_DIR is a full path + "\"" + join("$BUILD_DIR","${PROGNAME}.hex") + "\"", # Note: $BUILD_DIR is a full path ]), "Building $TARGET")) # please keep $SOURCE variable, it will be replaced with a path to firmware @@ -27,11 +27,11 @@ env.AddPostAction( UPLOAD_TOOL="stm32flash" platform = env.PioPlatform() if platform.get_package_dir("tool-stm32duino") != None: - UPLOAD_TOOL=expandvars("'" + join(platform.get_package_dir("tool-stm32duino"),"stm32flash","stm32flash") + "'") + UPLOAD_TOOL=expandvars("\"" + join(platform.get_package_dir("tool-stm32duino"),"stm32flash","stm32flash") + "\"") env.Replace( UPLOADER=UPLOAD_TOOL, - UPLOADCMD=expandvars(UPLOAD_TOOL + " -v -i rts,-dtr,dtr $UPLOAD_PORT -R -w '" + join("$BUILD_DIR","${PROGNAME}.hex") + "'") + UPLOADCMD=expandvars(UPLOAD_TOOL + " -v -i rts,-dtr,dtr $UPLOAD_PORT -R -w \"" + join("$BUILD_DIR","${PROGNAME}.hex")+"\"") ) # Python callback diff --git a/buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py b/buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py index 25c1d9692..89e7b3bc1 100644 --- a/buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py +++ b/buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py @@ -39,5 +39,5 @@ def addboot(source,target,env): os.rename(target[0].path, firmware_without_bootloader_dir) #os.rename(target[0].dir.path+'/firmware_with_bootloader.bin', target[0].dir.path+'/firmware.bin') -env.AddPostAction('"$BUILD_DIR/${PROGNAME}.bin"', addboot); +env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", addboot); diff --git a/buildroot/share/PlatformIO/scripts/mks_robin.py b/buildroot/share/PlatformIO/scripts/mks_robin.py index fec6c0ea9..742f4cd17 100644 --- a/buildroot/share/PlatformIO/scripts/mks_robin.py +++ b/buildroot/share/PlatformIO/scripts/mks_robin.py @@ -27,4 +27,4 @@ def encrypt(source, target, env): finally: firmware.close() robin.close() -env.AddPostAction('"$BUILD_DIR/${PROGNAME}.bin"', encrypt); +env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); diff --git a/buildroot/share/PlatformIO/scripts/mks_robin_lite.py b/buildroot/share/PlatformIO/scripts/mks_robin_lite.py index 4d28d3ff0..c11bbb37f 100644 --- a/buildroot/share/PlatformIO/scripts/mks_robin_lite.py +++ b/buildroot/share/PlatformIO/scripts/mks_robin_lite.py @@ -27,4 +27,4 @@ def encrypt(source, target, env): finally: firmware.close() robin.close() -env.AddPostAction('"$BUILD_DIR/${PROGNAME}.bin"', encrypt); +env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); diff --git a/buildroot/share/PlatformIO/scripts/mks_robin_mini.py b/buildroot/share/PlatformIO/scripts/mks_robin_mini.py index 5247eaf17..2b3ba6f90 100755 --- a/buildroot/share/PlatformIO/scripts/mks_robin_mini.py +++ b/buildroot/share/PlatformIO/scripts/mks_robin_mini.py @@ -27,4 +27,4 @@ def encrypt(source, target, env): finally: firmware.close() robin.close() -env.AddPostAction('"$BUILD_DIR/${PROGNAME}.bin"', encrypt); +env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); diff --git a/buildroot/share/PlatformIO/scripts/mks_robin_nano.py b/buildroot/share/PlatformIO/scripts/mks_robin_nano.py index feb9b2e4e..eb8bca9b5 100755 --- a/buildroot/share/PlatformIO/scripts/mks_robin_nano.py +++ b/buildroot/share/PlatformIO/scripts/mks_robin_nano.py @@ -27,4 +27,4 @@ def encrypt(source, target, env): finally: firmware.close() robin.close() -env.AddPostAction('"$BUILD_DIR/${PROGNAME}.bin"', encrypt); +env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp index d21f5d7dd..167fea510 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp +++ b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.cpp @@ -44,98 +44,100 @@ const PinName digitalPin[] = { PC_15, //D2 - OSC32_OUT PH_0, //D3 - OSC_IN PH_1, //D4 - OSC_OUT - PC_0, //D5 - 1: 2:ADC123_IN10 - PC_1, //D6 - 1: 2:ADC123_IN11 - PC_2, //D7 - 1:SPI2_MISO 2:ADC123_IN12 - PC_3, //D8 - 1:SPI2_MOSI 2:ADC123_IN13 - PA_0, //D9 - 1:UART4_TX / TIM5_CH1 2:ADC123_IN0 - PA_1, //D10 - 1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1 - PA_2, //D11 - 1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2 - PA_3, //D12 - 1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3 - PA_4, //D13 - NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1 - PA_5, //D14 - NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2 - PA_6, //D15 - 1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6 - PA_7, //D16 - 1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7 - PC_4, //D17 - 1: 2:ADC12_IN14 - PC_5, //D18 - 1: 2:ADC12_IN15 - PB_0, //D19 - 1:TIM3_CH3 2:ADC12_IN8 - PB_1, //D20 - 1:TIM3_CH4 2:ADC12_IN9 - PB_2, //D21 - BOOT1 - PB_10, //D22 - 1:SPI2_SCK / I2C2_SCL / USART3_TX / TIM2_CH3 - PB_11, //D23 - 1:I2C2_SDA / USART3_RX / TIM2_CH4 - PB_12, //D24 - 1:SPI2_NSS / OTG_HS_ID - PB_13, //D25 - 1:SPI2_SCK 2:OTG_HS_VBUS - PB_14, //D26 - 1:SPI2_MISO / TIM12_CH1 / OTG_HS_DM - PB_15, //D27 - SPI2_MOSI / TIM12_CH2 / OTG_HS_DP - PC_6, //D28 - 1:TIM8_CH1 / SDIO_D6 / USART6_TX / TIM3_CH1 - PC_7, //D29 - 1:TIM8_CH2 / SDIO_D7 / USART6_RX / TIM3_CH2 - PC_8, //D30 - 1:TIM8_CH3 / SDIO_D0 / TIM3_CH3 - PC_9, //D31 - 1:TIM8_CH4 / SDIO_D1 / TIM3_CH4 - PA_8, //D32 - 1:TIM1_CH1 / I2C3_SCL / OTG_FS_SOF - PA_9, //D33 - 1:USART1_TX / TIM1_CH2 2:OTG_FS_VBUS - PA_10, //34 - 1:USART1_RX / TIM1_CH3 / OTG_FS_ID - PA_11, //D35 - 1:TIM1_CH4 / OTG_FS_DM - PA_12, //D36 - 1:OTG_FS_DP - PA_13, //D37 - 0:JTMS-SWDIO - PA_14, //D38 - 0:JTCK-SWCLK - PA_15, //D39 - 0:JTDI 1:SPI3_NSS / SPI1_NSS - PC_10, //D40 - 1:UART4_TX / SPI3_SCK / SDIO_D2 / USART3_TX - PC_11, //D41 - 1:UART4_RX / SPI3_MISO / SDIO_D3 / USART3_RX - PC_12, //D42 - 1:UART5_TX / SPI3_MOSI / SDIO_CK - PD_2, //D43 - 1:UART5_RX / SDIO_CMD - PB_3, //D44 - 0:JTDO 1:SPI3_SCK / TIM2_CH2 / SPI1_SCK - PB_4, //D45 - 0:NJTRST 1:SPI3_MISO / TIM3_CH1 / SPI1_MISO - PB_5, //D45 - 1:TIM3_CH2 / SPI1_MOSI / SPI3_MOSI - PB_6, //D47 - 1:I2C1_SCL / TIM4_CH1 / USART1_TX - PB_7, //D48 - 1:I2C1_SDA / TIM4_CH2 / USART1_RX - PB_8, //D49 - 1:I2C1_SCL / TIM4_CH3 / SDIO_D4 / TIM10_CH1 - PB_9, //D50 - 1:I2C1_SDA / TIM4_CH4 / SDIO_D5 / TIM11_CH1 / SPI2_NSS + PB_2, //D5 - BOOT1 + PB_10, //D6 - 1:SPI2_SCK / I2C2_SCL / USART3_TX / TIM2_CH3 + PB_11, //D7 - 1:I2C2_SDA / USART3_RX / TIM2_CH4 + PB_12, //D8 - 1:SPI2_NSS / OTG_HS_ID + PB_13, //D9 - 1:SPI2_SCK 2:OTG_HS_VBUS + PB_14, //D10 - 1:SPI2_MISO / TIM12_CH1 / OTG_HS_DM + PB_15, //D11 - SPI2_MOSI / TIM12_CH2 / OTG_HS_DP + PC_6, //D12 - 1:TIM8_CH1 / SDIO_D6 / USART6_TX / TIM3_CH1 + PC_7, //D13 - 1:TIM8_CH2 / SDIO_D7 / USART6_RX / TIM3_CH2 + PC_8, //D14 - 1:TIM8_CH3 / SDIO_D0 / TIM3_CH3 + PC_9, //D15 - 1:TIM8_CH4 / SDIO_D1 / TIM3_CH4 + PA_8, //D16 - 1:TIM1_CH1 / I2C3_SCL / OTG_FS_SOF + PA_9, //D17 - 1:USART1_TX / TIM1_CH2 2:OTG_FS_VBUS + PA_10, //D18 - 1:USART1_RX / TIM1_CH3 / OTG_FS_ID + PA_11, //D19 - 1:TIM1_CH4 / OTG_FS_DM + PA_12, //D20 - 1:OTG_FS_DP + PA_13, //D21 - 0:JTMS-SWDIO + PA_14, //D22 - 0:JTCK-SWCLK + PA_15, //D23 - 0:JTDI 1:SPI3_NSS / SPI1_NSS + PC_10, //D24 - 1:UART4_TX / SPI3_SCK / SDIO_D2 / USART3_TX + PC_11, //D25 - 1:UART4_RX / SPI3_MISO / SDIO_D3 / USART3_RX + PC_12, //D26 - 1:UART5_TX / SPI3_MOSI / SDIO_CK + PD_2, //D27 - 1:UART5_RX / SDIO_CMD + PB_3, //D28 - 0:JTDO 1:SPI3_SCK / TIM2_CH2 / SPI1_SCK + PB_4, //D29 - 0:NJTRST 1:SPI3_MISO / TIM3_CH1 / SPI1_MISO + PB_5, //D30 - 1:TIM3_CH2 / SPI1_MOSI / SPI3_MOSI + PB_6, //D31 - 1:I2C1_SCL / TIM4_CH1 / USART1_TX + PB_7, //D32 - 1:I2C1_SDA / TIM4_CH2 / USART1_RX + PB_8, //D33 - 1:I2C1_SCL / TIM4_CH3 / SDIO_D4 / TIM10_CH1 + PB_9, //D34 - 1:I2C1_SDA / TIM4_CH4 / SDIO_D5 / TIM11_CH1 / SPI2_NSS + PA_0, //D35/A0 - 1:UART4_TX / TIM5_CH1 2:ADC123_IN0 + PA_1, //D36/A1 - 1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1 + PA_2, //D37/A2 - 1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2 + PA_3, //D38/A3 - 1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3 + PA_4, //D39/A4 - NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1 + PA_5, //D40/A5 - NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2 + PA_6, //D41/A6 - 1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6 + PA_7, //D42/A7 - 1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7 + PB_0, //D43/A8 - 1:TIM3_CH3 2:ADC12_IN8 + PB_1, //D44/A9 - 1:TIM3_CH4 2:ADC12_IN9 + PC_0, //D45/A10 - 1: 2:ADC123_IN10 + PC_1, //D46/A11 - 1: 2:ADC123_IN11 + PC_2, //D47/A12 - 1:SPI2_MISO 2:ADC123_IN12 + PC_3, //D48/A13 - 1:SPI2_MOSI 2:ADC123_IN13 + PC_4, //D49/A14 - 1: 2:ADC12_IN14 + PC_5, //D50/A15 - 1: 2:ADC12_IN15 + #if STM32F4X_PIN_NUM >= 144 + PF_3, //D51/A16 - 1:FSMC_A3 2:ADC3_IN9 + PF_4, //D52/A17 - 1:FSMC_A4 2:ADC3_IN14 + PF_5, //D53/A18 - 1:FSMC_A5 2:ADC3_IN15 + PF_6, //D54/A19 - 1:TIM10_CH1 2:ADC3_IN4 + PF_7, //D55/A20 - 1:TIM11_CH1 2:ADC3_IN5 + PF_8, //D56/A21 - 1:TIM13_CH1 2:ADC3_IN6 + PF_9, //D57/A22 - 1;TIM14_CH1 2:ADC3_IN7 + PF_10, //D58/A23 - 2:ADC3_IN8 + #endif #endif #if STM32F4X_PIN_NUM >= 100 //100 pins mcu, 82 gpio - PE_2, //D51 - 1:FSMC_A23 - PE_3, //D52 - 1:FSMC_A19 - PE_4, //D53 - 1:FSMC_A20 - PE_5, //D54 - 1:FSMC_A21 - PE_6, //D55 - 1:FSMC_A22 - PE_7, //D56 - 1:FSMC_D4 - PE_8, //D57 - 1:FSMC_D5 - PE_9, //D58 - 1:FSMC_D6 / TIM1_CH1 - PE_10, //D59 - 1:FSMC_D7 - PE_11, //D60 - 1:FSMC_D8 / TIM1_CH2 - PE_12, //D61 - 1:FSMC_D9 - PE_13, //D62 - 1:FSMC_D10 / TIM1_CH3 - PE_14, //D63 - 1:FSMC_D11 / TIM1_CH4 - PE_15, //D64 - 1:FSMC_D12 - PD_8, //D65 - 1:FSMC_D13 / USART3_TX - PD_9, //D66 - 1:FSMC_D14 / USART3_RX - PD_10, //D67 - 1:FSMC_D15 - PD_11, //D68 - 1:FSMC_A16 - PD_12, //D69 - 1:FSMC_A17 / TIM4_CH1 - PD_13, //D70 - 1:FSMC_A18 / TIM4_CH2 - PD_14, //D71 - 1:FSMC_D0 / TIM4_CH3 - PD_15, //D72 - 1:FSMC_D1 / TIM4_CH4 - PD_0, //D73 - 1:FSMC_D2 - PD_1, //D74 - 1:FSMC_D3 - PD_3, //D75 - 1:FSMC_CLK - PD_4, //D76 - 1:FSMC_NOE - PD_5, //D77 - 1:USART2_TX - PD_6, //D78 - 1:USART2_RX - PD_7, //D79 - PE_0, //D80 - PE_1, //D81 + PE_2, //D59 - 1:FSMC_A23 + PE_3, //D60 - 1:FSMC_A19 + PE_4, //D61 - 1:FSMC_A20 + PE_5, //D62 - 1:FSMC_A21 + PE_6, //D63 - 1:FSMC_A22 + PE_7, //D64 - 1:FSMC_D4 + PE_8, //D65 - 1:FSMC_D5 + PE_9, //D66 - 1:FSMC_D6 / TIM1_CH1 + PE_10, //D67 - 1:FSMC_D7 + PE_11, //D68 - 1:FSMC_D8 / TIM1_CH2 + PE_12, //D69 - 1:FSMC_D9 + PE_13, //D70 - 1:FSMC_D10 / TIM1_CH3 + PE_14, //D71 - 1:FSMC_D11 / TIM1_CH4 + PE_15, //D72 - 1:FSMC_D12 + PD_8, //D73 - 1:FSMC_D13 / USART3_TX + PD_9, //D74 - 1:FSMC_D14 / USART3_RX + PD_10, //D75 - 1:FSMC_D15 + PD_11, //D76 - 1:FSMC_A16 + PD_12, //D77 - 1:FSMC_A17 / TIM4_CH1 + PD_13, //D78 - 1:FSMC_A18 / TIM4_CH2 + PD_14, //D79 - 1:FSMC_D0 / TIM4_CH3 + PD_15, //D80 - 1:FSMC_D1 / TIM4_CH4 + PD_0, //D81 - 1:FSMC_D2 + PD_1, //D82 - 1:FSMC_D3 + PD_3, //D83 - 1:FSMC_CLK + PD_4, //D84 - 1:FSMC_NOE + PD_5, //D85 - 1:USART2_TX + PD_6, //D86 - 1:USART2_RX + PD_7, //D87 + PE_0, //D88 + PE_1, //D89 #endif #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio - PF_0, //D82 - 1:FSMC_A0 / I2C2_SDA - PF_1, //D83 - 1:FSMC_A1 / I2C2_SCL - PF_2, //D84 - 1:FSMC_A2 - PF_3, //D85 - 1:FSMC_A3 2:ADC3_IN9 - PF_4, //D86 - 1:FSMC_A4 2:ADC3_IN14 - PF_5, //D87 - 1:FSMC_A5 2:ADC3_IN15 - PF_6, //D88 - 1:TIM10_CH1 2:ADC3_IN4 - PF_7, //D89 - 1:TIM11_CH1 2:ADC3_IN5 - PF_8, //D90 - 1:TIM13_CH1 2:ADC3_IN6 - PF_9, //D91 - 1;TIM14_CH1 2:ADC3_IN7 - PF_10, //D92 - 2:ADC3_IN8 + PF_0, //D90 - 1:FSMC_A0 / I2C2_SDA + PF_1, //D91 - 1:FSMC_A1 / I2C2_SCL + PF_2, //D92 - 1:FSMC_A2 PF_11, //D93 PF_12, //D94 - 1:FSMC_A6 PF_13, //D95 - 1:FSMC_A7 @@ -186,34 +188,6 @@ const PinName digitalPin[] = { PI_6, //D138 - 1:TIM8_CH2 PI_7, //D139 - 1:TIM8_CH3 #endif -#if STM32F4X_PIN_NUM >= 64 //64 pins mcu, 51 gpio, 16 ADC - PA_0, //D140/A0 = D9 - 1:UART4_TX / TIM5_CH1 2:ADC123_IN0 - PA_1, //D141/A1 = D10 - 1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1 - PA_2, //D142/A2 = D11 - 1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2 - PA_3, //D143/A3 = D12 - 1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3 - PA_4, //D144/A4 = D13 - NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1 - PA_5, //D145/A5 = D14 - NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2 - PA_6, //D146/A6 = D15 - 1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6 - PA_7, //D147/A7 = D16 - 1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7 - PB_0, //D148/A8 = D19 - 1:TIM3_CH3 2:ADC12_IN8 - PB_1, //D149/A9 = D20 - 1:TIM3_CH4 2:ADC12_IN9 - PC_0, //D150/A10 = D5 - 1: 2:ADC123_IN10 - PC_1, //D151/A11 = D6 - 1: 2:ADC123_IN11 - PC_2, //D152/A12 = D7 - 1:SPI2_MISO 2:ADC123_IN12 - PC_3, //D153/A13 = D8 - 1:SPI2_MOSI 2:ADC123_IN13 - PC_4, //D154/A14 = D17 - 1: 2:ADC12_IN14 - PC_5, //D155/A15 = D18 - 1: 2:ADC12_IN15 -#endif -#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio, 24 ADC - PF_3, //D156/A16 = D85 - 1:FSMC_A3 2:ADC3_IN9 - PF_4, //D157/A17 = D86 - 1:FSMC_A4 2:ADC3_IN14 - PF_5, //D158/A18 = D87 - 1:FSMC_A5 2:ADC3_IN15 - PF_6, //D159/A19 = D88 - 1:TIM10_CH1 2:ADC3_IN4 - PF_7, //D160/A20 = D89 - 1:TIM11_CH1 2:ADC3_IN5 - PF_8, //D161/A21 = D90 - 1:TIM13_CH1 2:ADC3_IN6 - PF_9, //D162/A22 = D91 - 1;TIM14_CH1 2:ADC3_IN7 - PF_10, //D163/A23 = D92 - 2:ADC3_IN8 -#endif }; #ifdef __cplusplus diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h index f6b9f7e4a..44155d9b0 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h +++ b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/variant.h @@ -65,159 +65,161 @@ extern const PinName digitalPin[]; #if STM32F4X_PIN_NUM >= 64 //64 pins mcu, 51 gpio #define PC13 0 - #define PC14 1 //OSC32_IN - #define PC15 2 //OSC32_OUT - #define PH0 3 //OSC_IN - #define PH1 4 //OSC_OUT - #define PC0 5 //1: 2:ADC123_IN10 - #define PC1 6 //1: 2:ADC123_IN11 - #define PC2 7 //1:SPI2_MISO 2:ADC123_IN12 - #define PC3 8 //1:SPI2_MOSI 2:ADC123_IN13 - #define PA0 9 //1:UART4_TX / TIM5_CH1 2:ADC123_IN0 - #define PA1 10 //1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1 - #define PA2 11 //1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2 - #define PA3 12 //1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3 - #define PA4 13 //NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1 - #define PA5 14 //NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2 - #define PA6 15 //1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6 - #define PA7 16 //1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7 - #define PC4 17 //1: 2:ADC12_IN14 - #define PC5 18 //1: 2:ADC12_IN15 - #define PB0 19 //1:TIM3_CH3 2:ADC12_IN8 - #define PB1 20 //1:TIM3_CH4 2:ADC12_IN9 - #define PB2 21 //BOOT1 - #define PB10 22 //1:SPI2_SCK / I2C2_SCL / USART3_TX / TIM2_CH3 - #define PB11 23 //1:I2C2_SDA / USART3_RX / TIM2_CH4 - #define PB12 24 //1:SPI2_NSS / OTG_HS_ID - #define PB13 25 //1:SPI2_SCK 2:OTG_HS_VBUS - #define PB14 26 //1:SPI2_MISO / TIM12_CH1 / OTG_HS_DM - #define PB15 27 //SPI2_MOSI / TIM12_CH2 / OTG_HS_DP - #define PC6 28 //1:TIM8_CH1 / SDIO_D6 / USART6_TX / TIM3_CH1 - #define PC7 29 //1:TIM8_CH2 / SDIO_D7 / USART6_RX / TIM3_CH2 - #define PC8 30 //1:TIM8_CH3 / SDIO_D0 / TIM3_CH3 - #define PC9 31 //1:TIM8_CH4 / SDIO_D1 / TIM3_CH4 - #define PA8 32 //1:TIM1_CH1 / I2C3_SCL / OTG_FS_SOF - #define PA9 33 //1:USART1_TX / TIM1_CH2 2:OTG_FS_VBUS - #define PA10 34 //1:USART1_RX / TIM1_CH3 / OTG_FS_ID - #define PA11 35 //1:TIM1_CH4 / OTG_FS_DM - #define PA12 36 //1:OTG_FS_DP - #define PA13 37 //0:JTMS-SWDIO - #define PA14 38 //0:JTCK-SWCLK - #define PA15 39 //0:JTDI 1:SPI3_NSS / SPI1_NSS - #define PC10 40 //1:UART4_TX / SPI3_SCK / SDIO_D2 / USART3_TX - #define PC11 41 //1:UART4_RX / SPI3_MISO / SDIO_D3 / USART3_RX - #define PC12 42 //1:UART5_TX / SPI3_MOSI / SDIO_CK - #define PD2 43 //1:UART5_RX / SDIO_CMD - #define PB3 44 //0:JTDO 1:SPI3_SCK / TIM2_CH2 / SPI1_SCK - #define PB4 45 //0:NJTRST 1:SPI3_MISO / TIM3_CH1 / SPI1_MISO - #define PB5 46 //1:TIM3_CH2 / SPI1_MOSI / SPI3_MOSI - #define PB6 47 //1:I2C1_SCL / TIM4_CH1 / USART1_TX - #define PB7 48 //1:I2C1_SDA / TIM4_CH2 / USART1_RX - #define PB8 49 //1:I2C1_SCL / TIM4_CH3 / SDIO_D4 / TIM10_CH1 - #define PB9 50 //1:I2C1_SDA / TIM4_CH4 / SDIO_D5 / TIM11_CH1 / SPI2_NSS + #define PC14 1 //OSC32_IN + #define PC15 2 //OSC32_OUT + #define PH0 3 //OSC_IN + #define PH1 4 //OSC_OUT + #define PB2 5 //BOOT1 + #define PB10 6 //1:SPI2_SCK / I2C2_SCL / USART3_TX / TIM2_CH3 + #define PB11 7 //1:I2C2_SDA / USART3_RX / TIM2_CH4 + #define PB12 8 //1:SPI2_NSS / OTG_HS_ID + #define PB13 9 //1:SPI2_SCK 2:OTG_HS_VBUS + #define PB14 10 //1:SPI2_MISO / TIM12_CH1 / OTG_HS_DM + #define PB15 11 //SPI2_MOSI / TIM12_CH2 / OTG_HS_DP + #define PC6 12 //1:TIM8_CH1 / SDIO_D6 / USART6_TX / TIM3_CH1 + #define PC7 13 //1:TIM8_CH2 / SDIO_D7 / USART6_RX / TIM3_CH2 + #define PC8 14 //1:TIM8_CH3 / SDIO_D0 / TIM3_CH3 + #define PC9 15 //1:TIM8_CH4 / SDIO_D1 / TIM3_CH4 + #define PA8 16 //1:TIM1_CH1 / I2C3_SCL / OTG_FS_SOF + #define PA9 17 //1:USART1_TX / TIM1_CH2 2:OTG_FS_VBUS + #define PA10 18 //1:USART1_RX / TIM1_CH3 / OTG_FS_ID + #define PA11 19 //1:TIM1_CH4 / OTG_FS_DM + #define PA12 20 //1:OTG_FS_DP + #define PA13 21 //0:JTMS-SWDIO + #define PA14 22 //0:JTCK-SWCLK + #define PA15 23 //0:JTDI 1:SPI3_NSS / SPI1_NSS + #define PC10 24 //1:UART4_TX / SPI3_SCK / SDIO_D2 / USART3_TX + #define PC11 25 //1:UART4_RX / SPI3_MISO / SDIO_D3 / USART3_RX + #define PC12 26 //1:UART5_TX / SPI3_MOSI / SDIO_CK + #define PD2 27 //1:UART5_RX / SDIO_CMD + #define PB3 28 //0:JTDO 1:SPI3_SCK / TIM2_CH2 / SPI1_SCK + #define PB4 29 //0:NJTRST 1:SPI3_MISO / TIM3_CH1 / SPI1_MISO + #define PB5 30 //1:TIM3_CH2 / SPI1_MOSI / SPI3_MOSI + #define PB6 31 //1:I2C1_SCL / TIM4_CH1 / USART1_TX + #define PB7 32 //1:I2C1_SDA / TIM4_CH2 / USART1_RX + #define PB8 33 //1:I2C1_SCL / TIM4_CH3 / SDIO_D4 / TIM10_CH1 + #define PB9 34 //1:I2C1_SDA / TIM4_CH4 / SDIO_D5 / TIM11_CH1 / SPI2_NSS + #define PA0 35 //1:UART4_TX / TIM5_CH1 2:ADC123_IN0 + #define PA1 36 //1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1 + #define PA2 37 //1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2 + #define PA3 38 //1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3 + #define PA4 39 //NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1 + #define PA5 40 //NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2 + #define PA6 41 //1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6 + #define PA7 42 //1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7 + #define PB0 43 //1:TIM3_CH3 2:ADC12_IN8 + #define PB1 44 //1:TIM3_CH4 2:ADC12_IN9 + #define PC0 45 //1: 2:ADC123_IN10 + #define PC1 46 //1: 2:ADC123_IN11 + #define PC2 47 //1:SPI2_MISO 2:ADC123_IN12 + #define PC3 48 //1:SPI2_MOSI 2:ADC123_IN13 + #define PC4 49 //1: 2:ADC12_IN14 + #define PC5 50 //1: 2:ADC12_IN15 + #if STM32F4X_PIN_NUM >= 144 + #define PF3 51 //1:FSMC_A3 2:ADC3_IN9 + #define PF4 52 //1:FSMC_A4 2:ADC3_IN14 + #define PF5 53 //1:FSMC_A5 2:ADC3_IN15 + #define PF6 54 //1:TIM10_CH1 2:ADC3_IN4 + #define PF7 55 //1:TIM11_CH1 2:ADC3_IN5 + #define PF8 56 //1:TIM13_CH1 2:ADC3_IN6 + #define PF9 57 //1;TIM14_CH1 2:ADC3_IN7 + #define PF10 58 //2:ADC3_IN8 + #endif #endif #if STM32F4X_PIN_NUM >= 100 //100 pins mcu, 82 gpio - #define PE2 51 //1:FSMC_A23 - #define PE3 52 //1:FSMC_A19 - #define PE4 53 //1:FSMC_A20 - #define PE5 54 //1:FSMC_A21 - #define PE6 55 //1:FSMC_A22 - #define PE7 56 //1:FSMC_D4 - #define PE8 57 //1:FSMC_D5 - #define PE9 58 //1:FSMC_D6 / TIM1_CH1 - #define PE10 59 //1:FSMC_D7 - #define PE11 60 //1:FSMC_D8 / TIM1_CH2 - #define PE12 61 //1:FSMC_D9 - #define PE13 62 //1:FSMC_D10 / TIM1_CH3 - #define PE14 63 //1:FSMC_D11 / TIM1_CH4 - #define PE15 64 //1:FSMC_D12 - #define PD8 65 //1:FSMC_D13 / USART3_TX - #define PD9 66 //1:FSMC_D14 / USART3_RX - #define PD10 67 //1:FSMC_D15 - #define PD11 68 //1:FSMC_A16 - #define PD12 69 //1:FSMC_A17 / TIM4_CH1 - #define PD13 70 //1:FSMC_A18 / TIM4_CH2 - #define PD14 71 //1:FSMC_D0 / TIM4_CH3 - #define PD15 72 //1:FSMC_D1 / TIM4_CH4 - #define PD0 73 //1:FSMC_D2 - #define PD1 74 //1:FSMC_D3 - #define PD3 75 //1:FSMC_CLK - #define PD4 76 //1:FSMC_NOE - #define PD5 77 //1:USART2_TX - #define PD6 78 //1:USART2_RX - #define PD7 79 - #define PE0 80 - #define PE1 81 + #define PE2 (35+STM32F4X_ADC_NUM) //1:FSMC_A23 + #define PE3 (36+STM32F4X_ADC_NUM) //1:FSMC_A19 + #define PE4 (37+STM32F4X_ADC_NUM) //1:FSMC_A20 + #define PE5 (38+STM32F4X_ADC_NUM) //1:FSMC_A21 + #define PE6 (39+STM32F4X_ADC_NUM) //1:FSMC_A22 + #define PE7 (40+STM32F4X_ADC_NUM) //1:FSMC_D4 + #define PE8 (41+STM32F4X_ADC_NUM) //1:FSMC_D5 + #define PE9 (42+STM32F4X_ADC_NUM) //1:FSMC_D6 / TIM1_CH1 + #define PE10 (43+STM32F4X_ADC_NUM) //1:FSMC_D7 + #define PE11 (44+STM32F4X_ADC_NUM) //1:FSMC_D8 / TIM1_CH2 + #define PE12 (45+STM32F4X_ADC_NUM) //1:FSMC_D9 + #define PE13 (46+STM32F4X_ADC_NUM) //1:FSMC_D10 / TIM1_CH3 + #define PE14 (47+STM32F4X_ADC_NUM) //1:FSMC_D11 / TIM1_CH4 + #define PE15 (48+STM32F4X_ADC_NUM) //1:FSMC_D12 + #define PD8 (49+STM32F4X_ADC_NUM) //1:FSMC_D13 / USART3_TX + #define PD9 (50+STM32F4X_ADC_NUM) //1:FSMC_D14 / USART3_RX + #define PD10 (51+STM32F4X_ADC_NUM) //1:FSMC_D15 + #define PD11 (52+STM32F4X_ADC_NUM) //1:FSMC_A16 + #define PD12 (53+STM32F4X_ADC_NUM) //1:FSMC_A17 / TIM4_CH1 + #define PD13 (54+STM32F4X_ADC_NUM) //1:FSMC_A18 / TIM4_CH2 + #define PD14 (55+STM32F4X_ADC_NUM) //1:FSMC_D0 / TIM4_CH3 + #define PD15 (56+STM32F4X_ADC_NUM) //1:FSMC_D1 / TIM4_CH4 + #define PD0 (57+STM32F4X_ADC_NUM) //1:FSMC_D2 + #define PD1 (58+STM32F4X_ADC_NUM) //1:FSMC_D3 + #define PD3 (59+STM32F4X_ADC_NUM) //1:FSMC_CLK + #define PD4 (60+STM32F4X_ADC_NUM) //1:FSMC_NOE + #define PD5 (61+STM32F4X_ADC_NUM) //1:USART2_TX + #define PD6 (62+STM32F4X_ADC_NUM) //1:USART2_RX + #define PD7 (63+STM32F4X_ADC_NUM) + #define PE0 (64+STM32F4X_ADC_NUM) + #define PE1 (65+STM32F4X_ADC_NUM) #endif #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio - #define PF0 82 //1:FSMC_A0 / I2C2_SDA - #define PF1 83 //1:FSMC_A1 / I2C2_SCL - #define PF2 84 //1:FSMC_A2 - #define PF3 85 //1:FSMC_A3 2:ADC3_IN9 - #define PF4 86 //1:FSMC_A4 2:ADC3_IN14 - #define PF5 87 //1:FSMC_A5 2:ADC3_IN15 - #define PF6 88 //1:TIM10_CH1 2:ADC3_IN4 - #define PF7 89 //1:TIM11_CH1 2:ADC3_IN5 - #define PF8 90 //1:TIM13_CH1 2:ADC3_IN6 - #define PF9 91 //1;TIM14_CH1 2:ADC3_IN7 - #define PF10 92 //2:ADC3_IN8 - #define PF11 93 - #define PF12 94 //1:FSMC_A6 - #define PF13 95 //1:FSMC_A7 - #define PF14 96 //1:FSMC_A8 - #define PF15 97 //1:FSMC_A9 - #define PG0 98 //1:FSMC_A10 - #define PG1 99 //1:FSMC_A11 - #define PG2 100 //1:FSMC_A12 - #define PG3 101 //1:FSMC_A13 - #define PG4 102 //1:FSMC_A14 - #define PG5 103 //1:FSMC_A15 - #define PG6 104 - #define PG7 105 - #define PG8 106 - #define PG9 107 //1:USART6_RX - #define PG10 108 //1:FSMC_NE3 - #define PG11 109 - #define PG12 110 //1:FSMC_NE4 - #define PG13 111 //1:FSMC_A24 - #define PG14 112 //1:FSMC_A25 / USART6_TX - #define PG15 113 + #define PF0 (66+STM32F4X_ADC_NUM) //1:FSMC_A0 / I2C2_SDA + #define PF1 (67+STM32F4X_ADC_NUM) //1:FSMC_A1 / I2C2_SCL + #define PF2 (68+STM32F4X_ADC_NUM) //1:FSMC_A2 + #define PF11 (69+STM32F4X_ADC_NUM) + #define PF12 (70+STM32F4X_ADC_NUM) //1:FSMC_A6 + #define PF13 (71+STM32F4X_ADC_NUM) //1:FSMC_A7 + #define PF14 (72+STM32F4X_ADC_NUM) //1:FSMC_A8 + #define PF15 (73+STM32F4X_ADC_NUM) //1:FSMC_A9 + #define PG0 (74+STM32F4X_ADC_NUM) //1:FSMC_A10 + #define PG1 (75+STM32F4X_ADC_NUM) //1:FSMC_A11 + #define PG2 (76+STM32F4X_ADC_NUM) //1:FSMC_A12 + #define PG3 (77+STM32F4X_ADC_NUM) //1:FSMC_A13 + #define PG4 (78+STM32F4X_ADC_NUM) //1:FSMC_A14 + #define PG5 (79+STM32F4X_ADC_NUM) //1:FSMC_A15 + #define PG6 (80+STM32F4X_ADC_NUM) + #define PG7 (81+STM32F4X_ADC_NUM) + #define PG8 (82+STM32F4X_ADC_NUM) + #define PG9 (83+STM32F4X_ADC_NUM) //1:USART6_RX + #define PG10 (84+STM32F4X_ADC_NUM) //1:FSMC_NE3 + #define PG11 (85+STM32F4X_ADC_NUM) + #define PG12 (86+STM32F4X_ADC_NUM) //1:FSMC_NE4 + #define PG13 (87+STM32F4X_ADC_NUM) //1:FSMC_A24 + #define PG14 (88+STM32F4X_ADC_NUM) //1:FSMC_A25 / USART6_TX + #define PG15 (89+STM32F4X_ADC_NUM) #endif #if STM32F4X_PIN_NUM >= 176 //176 pins mcu, 140 gpio - #define PI8 114 - #define PI9 115 - #define PI10 116 - #define PI11 117 - #define PH2 118 - #define PH3 119 - #define PH4 120 //1:I2C2_SCL - #define PH5 121 //1:I2C2_SDA - #define PH6 122 //1:TIM12_CH1 - #define PH7 123 //1:I2C3_SCL - #define PH8 124 //1:I2C3_SDA - #define PH9 125 //1:TIM12_CH2 - #define PH10 126 //1:TIM5_CH1 - #define PH11 127 //1:TIM5_CH2 - #define PH12 128 //1:TIM5_CH3 - #define PH13 129 - #define PH14 130 - #define PH15 131 - #define PI0 132 //1:TIM5_CH4 / SPI2_NSS - #define PI1 133 //1:SPI2_SCK - #define PI2 134 //1:TIM8_CH4 /SPI2_MISO - #define PI3 135 //1:SPI2_MOS - #define PI4 136 - #define PI5 137 //1:TIM8_CH1 - #define PI6 138 //1:TIM8_CH2 - #define PI7 139 //1:TIM8_CH3 + #define PI8 (90+STM32F4X_ADC_NUM) + #define PI9 (91+STM32F4X_ADC_NUM) + #define PI10 (92+STM32F4X_ADC_NUM) + #define PI11 (93+STM32F4X_ADC_NUM) + #define PH2 (94+STM32F4X_ADC_NUM) + #define PH3 (95+STM32F4X_ADC_NUM) + #define PH4 (96+STM32F4X_ADC_NUM) //1:I2C2_SCL + #define PH5 (97+STM32F4X_ADC_NUM) //1:I2C2_SDA + #define PH6 (98+STM32F4X_ADC_NUM) //1:TIM12_CH1 + #define PH7 (99+STM32F4X_ADC_NUM) //1:I2C3_SCL + #define PH8 (100+STM32F4X_ADC_NUM) //1:I2C3_SDA + #define PH9 (101+STM32F4X_ADC_NUM) //1:TIM12_CH2 + #define PH10 (102+STM32F4X_ADC_NUM) //1:TIM5_CH1 + #define PH11 (103+STM32F4X_ADC_NUM) //1:TIM5_CH2 + #define PH12 (104+STM32F4X_ADC_NUM) //1:TIM5_CH3 + #define PH13 (105+STM32F4X_ADC_NUM) + #define PH14 (106+STM32F4X_ADC_NUM) + #define PH15 (107+STM32F4X_ADC_NUM) + #define PI0 (108+STM32F4X_ADC_NUM) //1:TIM5_CH4 / SPI2_NSS + #define PI1 (109+STM32F4X_ADC_NUM) //1:SPI2_SCK + #define PI2 (110+STM32F4X_ADC_NUM) //1:TIM8_CH4 /SPI2_MISO + #define PI3 (111+STM32F4X_ADC_NUM) //1:SPI2_MOS + #define PI4 (112+STM32F4X_ADC_NUM) + #define PI5 (113+STM32F4X_ADC_NUM) //1:TIM8_CH1 + #define PI6 (114+STM32F4X_ADC_NUM) //1:TIM8_CH2 + #define PI7 (115+STM32F4X_ADC_NUM) //1:TIM8_CH3 #endif // This must be a literal -#define NUM_DIGITAL_PINS (STM32F4X_GPIO_NUM + STM32F4X_ADC_NUM) +#define NUM_DIGITAL_PINS (STM32F4X_GPIO_NUM) // This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS #define NUM_ANALOG_INPUTS (STM32F4X_ADC_NUM) -#define NUM_ANALOG_FIRST (STM32F4X_GPIO_NUM) +#define NUM_ANALOG_FIRST 35 // Below ADC, DAC and PWM definitions already done in the core // Could be redefined here if needed diff --git a/buildroot/share/tests/megaatmega2560-tests b/buildroot/share/tests/megaatmega2560-tests index 62d0f8711..3aaa0ba4e 100755 --- a/buildroot/share/tests/megaatmega2560-tests +++ b/buildroot/share/tests/megaatmega2560-tests @@ -54,7 +54,7 @@ opt_set TEMP_SENSOR_3 20 opt_set TEMP_SENSOR_4 1000 opt_set TEMP_SENSOR_BED 1 opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \ - REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING \ + REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LIGHTWEIGHT_UI STATUS_MESSAGE_SCROLLING BOOT_MARLIN_LOGO_SMALL BOOT_MARLIN_LOGO_ANIMATED \ SDSUPPORT SDCARD_SORT_ALPHA USB_FLASH_DRIVE_SUPPORT SCROLL_LONG_FILENAMES \ EEPROM_SETTINGS EEPROM_CHITCHAT GCODE_MACROS CUSTOM_USER_MENUS \ MULTI_NOZZLE_DUPLICATION JUNCTION_DEVIATION LIN_ADVANCE QUICK_HOME \ diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 2744d43b1..7a1111fde 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 23ce49121..b009eb612 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 72a38c751..af619a56a 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2064,6 +2065,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 1a7047a28..6cda88c3d 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 9 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + #define CONTROLLER_FAN_PIN 9 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/ADIMLab/Granty/Configuration.h b/config/examples/ADIMLab/Granty/Configuration.h index c76a58a5d..e839273df 100644 --- a/config/examples/ADIMLab/Granty/Configuration.h +++ b/config/examples/ADIMLab/Granty/Configuration.h @@ -135,7 +135,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "ADIMLab Granty V2" +#define CUSTOM_MACHINE_NAME "ADIMLab Granty V2" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like http://www.uuidgenerator.net/version4 diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index 3a78a9164..1b7b43c83 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 7 #define TEMP_SENSOR_1 0 @@ -2053,6 +2054,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index a2d8e4281..a2db93116 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -279,9 +279,10 @@ */ #define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 130 // 255 == full speed + #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 130 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index d3b878a80..f0c135129 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -409,6 +409,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -452,7 +453,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -1379,8 +1380,8 @@ #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CORNERS_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points + #define LEVEL_CENTER_TOO // Move to the center after the last corner #endif /** @@ -1418,7 +1419,7 @@ #endif // Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) +#define HOMING_FEEDRATE_XY (40*60) #define HOMING_FEEDRATE_Z (7*60) // Validate that endstops are triggered on homing moves @@ -2123,6 +2124,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. @@ -2151,10 +2158,10 @@ #if ENABLED(TS_V11) // Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen - #define XPT2046_X_CALIBRATION 11605 - #define XPT2046_Y_CALIBRATION 9091 - #define XPT2046_X_OFFSET -24 - #define XPT2046_Y_OFFSET -17 + #define XPT2046_X_CALIBRATION 11605 + #define XPT2046_Y_CALIBRATION 9091 + #define XPT2046_X_OFFSET -24 + #define XPT2046_Y_OFFSET -17 #endif #if ENABLED(TS_V12) diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 7f80aad84..e6fd2a1ff 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -517,7 +518,7 @@ #define X_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5 #define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially //#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing @@ -650,16 +651,17 @@ #if EITHER(ULTIPANEL, EXTENSIBLE_UI) #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #if ENABLED(ULTIPANEL) #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -849,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -878,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -929,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1146,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1156,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2302,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2363,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index cc5fc2de9..c1312b403 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 896150c28..dfe21131f 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 20 #define TEMP_SENSOR_1 20 @@ -2044,6 +2045,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 342685413..3b8cccb45 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 5043f6826..cc07912b3 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2035,6 +2036,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 8015e3e9b..d84a68a5b 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 10710ca9d..f393c886d 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2035,6 +2036,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 8015e3e9b..d84a68a5b 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 7f3103b4d..a201a8543 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 11 #define TEMP_SENSOR_1 0 @@ -2186,6 +2187,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index a1bb61573..a3e274c86 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index ecd11e1b5..f67c3797c 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -360,6 +360,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -403,7 +404,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2048,6 +2049,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 0a5057f7c..03c6203d4 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 1a4688407..8d64b038d 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -360,6 +360,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -403,7 +404,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2044,6 +2045,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 36d2594ba..2ad71387c 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h index 9a41b9476..e92c834ac 100644 --- a/config/examples/Anet/E16/Configuration.h +++ b/config/examples/Anet/E16/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2045,6 +2046,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index f6cb50b3b..3ef6f157a 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1133,7 +1142,8 @@ //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/AnimationExample/_Bootscreen.h b/config/examples/AnimationExample/_Bootscreen.h index 2c1d31e44..69fdca6f7 100644 --- a/config/examples/AnimationExample/_Bootscreen.h +++ b/config/examples/AnimationExample/_Bootscreen.h @@ -25,7 +25,7 @@ * Animated boot screen example */ -#define ANIMATED_BOOTSCREEN +#define CUSTOM_BOOTSCREEN_ANIMATED #define CUSTOM_BOOTSCREEN_FRAME_TIME 100 // (ms) #define CUSTOM_BOOTSCREEN_BMPWIDTH 128 @@ -90,7 +90,7 @@ const unsigned char custom_start_bmp[] PROGMEM = { B00000000,B00000000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 }; -#if ENABLED(ANIMATED_BOOTSCREEN) +#if ENABLED(CUSTOM_BOOTSCREEN_ANIMATED) const unsigned char custom_start_bmp1[] PROGMEM = { B11111001,B11111111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 2617490f2..f72d0ab33 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2043,6 +2044,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index b54cd4ea4..8c347fa50 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -279,9 +279,10 @@ */ #define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 7 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + #define CONTROLLER_FAN_PIN 7 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 4a9514320..27556db66 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2034,6 +2035,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 4eb3b4eb0..b1c278a3b 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -283,9 +283,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -661,10 +662,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -854,11 +855,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -883,23 +908,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -934,6 +942,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1138,6 +1147,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1147,6 +1157,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2246,6 +2303,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2300,6 +2364,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 13b6bfd10..66c4d55ff 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 1 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 4eea9611d..ea7b87e5c 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 92e12f48e..04b8913ad 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 942030381..ee10b070d 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 5 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 72e36ed36..737d8b5b7 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index e4088ad11..06aad8503 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2021,6 +2022,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 58edc2bbc..55725ab96 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 5deedb2cd..806efae75 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -367,6 +367,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -410,7 +411,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 70 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 686bdbbeb..04a00c5a7 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -858,11 +859,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -887,23 +912,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -938,6 +946,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1142,6 +1151,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1151,6 +1161,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2250,6 +2307,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2304,6 +2368,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 32a53cec7..55544b04a 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2021,6 +2022,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 58edc2bbc..55725ab96 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 05142d8ab..f4d8e167a 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -360,6 +360,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -403,7 +404,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 -1 @@ -2032,6 +2033,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 4b2a9d40c..bc13c8e35 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h index caaf96e13..e538cdd41 100644 --- a/config/examples/Creality/CR-10/Configuration.h +++ b/config/examples/Creality/CR-10/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2043,6 +2044,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 0fb6d1411..3007004a3 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2245,6 +2302,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2299,6 +2363,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h index b3f8f667b..f4cbe652a 100644 --- a/config/examples/Creality/CR-10S/Configuration.h +++ b/config/examples/Creality/CR-10S/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2034,6 +2035,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index 477e442b9..516e967b4 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h index 5ae4f2cb1..833988af1 100644 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ b/config/examples/Creality/CR-10_5S/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2036,6 +2037,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index 7f7a85389..bafd0a00f 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h index e90f053d2..e32a3fef9 100644 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ b/config/examples/Creality/CR-10mini/Configuration.h @@ -368,6 +368,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -411,7 +412,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2052,6 +2053,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h index 181ebba9e..6ad33a18e 100644 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index ef0a822fa..8e8c0f775 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2036,6 +2037,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 98a7ed32b..7bbe10b5b 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index b2bda3c25..66dbf6fbc 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2036,6 +2037,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 483d04a24..63ad1b00c 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index d7279c3c2..216389034 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2043,6 +2044,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index d9d2f7cb6..6ddbd6351 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 10d2b959d..cc6031700 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2037,6 +2038,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index c234b9af7..7d4da6d28 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h index 24ada1036..6be4c819e 100644 --- a/config/examples/Creality/Ender-3/Configuration.h +++ b/config/examples/Creality/Ender-3/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2037,6 +2038,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h index 5ad49e333..a40dfbb22 100644 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index bf52448c1..854bafa62 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2043,6 +2044,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index bdbc64034..9b9a4dce4 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h index 7290d3c3c..60fc34fc5 100644 --- a/config/examples/Creality/Ender-5/Configuration.h +++ b/config/examples/Creality/Ender-5/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2036,6 +2037,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h index 145f40251..c8a5ba5e9 100644 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 086e254d8..3c84a4b43 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 18 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 259681dd5..9889528af 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h index ebfaea4b8..80df69ca4 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2038,6 +2039,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h index 0261fe867..b21f90225 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 3c34ac169..310d278a8 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 666 #define TEMP_SENSOR_1 0 @@ -2043,6 +2044,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index e47e83932..6f3a97e28 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 039af73bf..dd26faa4c 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2038,6 +2039,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 2e27154ad..b21a0b451 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + #define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h index 2d53de4a5..4b868cfdd 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h @@ -360,6 +360,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -403,7 +404,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2039,6 +2040,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h index 35d110145..ab6e4c9b3 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h index 60dd4a069..83031dacf 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2038,6 +2039,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h index d6d26f976..fd78ee0bb 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -656,10 +657,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -849,11 +850,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -878,23 +903,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -929,6 +937,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1133,6 +1142,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1142,6 +1152,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2241,6 +2298,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2295,6 +2359,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h index 4508637ec..cd14d80ec 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h @@ -355,6 +355,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -2021,6 +2022,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h index b840108dc..7c2aa5754 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -656,10 +657,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -849,11 +850,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -878,23 +903,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -929,6 +937,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1133,6 +1142,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1142,6 +1152,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2241,6 +2298,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2295,6 +2359,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h index 32cbd2f0a..99523eb51 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2038,6 +2039,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h index b840108dc..7c2aa5754 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -656,10 +657,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -849,11 +850,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -878,23 +903,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -929,6 +937,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1133,6 +1142,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1142,6 +1152,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2241,6 +2298,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2295,6 +2359,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index da991ed98..5d5c92243 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -361,6 +361,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -404,7 +405,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2035,6 +2036,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 7db5db859..93e544e32 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h index 40c9a2fb9..758746880 100644 --- a/config/examples/Felix/Configuration.h +++ b/config/examples/Felix/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2015,6 +2016,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h index 950fd138f..92016008b 100644 --- a/config/examples/Felix/Configuration_adv.h +++ b/config/examples/Felix/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 410c53373..75a8565ed 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 1 @@ -2015,6 +2016,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 180ba94ba..2eab8f96a 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 -2 #define TEMP_SENSOR_1 -2 @@ -2024,6 +2025,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index d1c1ccb0d..161382a49 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -849,11 +850,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + #define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 255 // User defined GREEN value + #define LED_USER_PRESET_BLUE 255 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -878,23 +903,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 255 // User defined GREEN value - #define LED_USER_PRESET_BLUE 255 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -929,6 +937,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1133,6 +1142,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1142,6 +1152,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2241,6 +2298,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2295,6 +2359,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 6db461428..75c5a2e9a 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2039,6 +2040,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 51e3a1d3e..16df7bea4 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index c12737412..a2634819a 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -400,6 +400,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -443,7 +444,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2138,6 +2139,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 344b023e3..5d48682fd 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index ff82069ab..a4b533455 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -368,6 +368,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -411,7 +412,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 1 @@ -2067,6 +2068,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index ac41ec45d..8fe80b66d 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -661,10 +662,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -854,11 +855,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -883,23 +908,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -934,6 +942,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1138,6 +1147,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1147,6 +1157,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2246,6 +2303,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2300,6 +2364,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index ca14491ba..49d1a5387 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -363,6 +363,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -406,7 +407,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 1 @@ -2061,6 +2062,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index d7ea6ed9f..01657311a 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -661,10 +662,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -854,11 +855,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -883,23 +908,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -934,6 +942,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1138,6 +1147,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1147,6 +1157,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2246,6 +2303,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2300,6 +2364,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 7e0fb6b8b..aa121eb0d 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2018,6 +2019,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 135bece86..89483172a 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index 6dec6f844..f5ad6e8c7 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2018,6 +2019,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index feced7eb1..c049c7e24 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) #define POWER_LOSS_PIN 69 // Pin to detect power loss #define POWER_LOSS_STATE LOW // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames #define STATUS_HEAT_PERCENT // Show heating in a progress bar #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 702017db7..5e9d6b174 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2020,6 +2021,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 93a2c3847..31797fd37 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) #define POWER_LOSS_PIN 69 // Pin to detect power loss #define POWER_LOSS_STATE LOW // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames #define STATUS_HEAT_PERCENT // Show heating in a progress bar #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index b79a7b231..de79058f3 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2048,6 +2049,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 7c5102b70..172d5f58f 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index c89d38099..bde857d36 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2040,6 +2041,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 723b821a5..ceea59e85 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2241,6 +2298,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2295,6 +2359,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 287178a53..1c9847f8a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2054,6 +2055,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 62c8da63d..db70d1cb0 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2053,6 +2054,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 1b905488f..aa4908d79 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 1 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 135bece86..89483172a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 924bb67f9..ae0e7cda6 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 135bece86..89483172a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h new file mode 100644 index 000000000..c4a91c123 --- /dev/null +++ b/config/examples/HMS434/Configuration.h @@ -0,0 +1,2199 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#define CONFIGURATION_H_VERSION 020000 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// config/examples/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// config/examples/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Scheepers, MaukCC)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * Select a secondary serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port -1 is the USB emulated serial port, if available. + * + * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] + */ +//#define SERIAL_PORT_2 -1 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// Choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_CNCONTROLS_15 +#endif + +// Name displayed in the LCD "Ready" message and Info menu +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 +#define MACHINE_UUID "75083866-86ea-42b2-b475-7b3a7855e716" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5, 6] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs + //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs +#endif + +/** + * Prusa Multi-Material Unit v2 + * + * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. + * Requires EXTRUDERS = 5 + * + * For additional configuration see Configuration_adv.h + */ +//#define PRUSA_MMU2 + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism using movements and no solenoid + * + * project : https://www.thingiverse.com/thing:3080893 + * movements : https://youtu.be/0xCEiG9VS3k + * https://youtu.be/Bqbcs0CU2FE + */ +//#define MAGNETIC_PARKING_EXTRUDER + +#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) + + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder + //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 + + #if ENABLED(PARKING_EXTRUDER) + + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. + //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 + + #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) + + #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point + #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple + #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point + #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling + + #endif + +#endif + +/** + * Switching Toolhead + * + * Support for swappable and dockable toolheads, such as + * the E3D Tool Changer. Toolheads are locked with a servo. + */ +//#define SWITCHING_TOOLHEAD + +/** + * Magnetic Switching Toolhead + * + * Support swappable and dockable toolheads with a magnetic + * docking mechanism using movement and no servo. + */ +//#define MAGNETIC_SWITCHING_TOOLHEAD + +/** + * Electromagnetic Switching Toolhead + * + * Parking for CoreXY / HBot kinematics. + * Toolheads are parked at one edge and held with an electromagnet. + * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 + */ +//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD + +#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) + #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock + #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis + #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis + #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders + #if ENABLED(SWITCHING_TOOLHEAD) + #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector + #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock + #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) + #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis + #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) + //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock + #if ENABLED(PRIME_BEFORE_REMOVE) + #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length + #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length + #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate + #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate + #endif + #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) + #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching + #endif +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands + //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #if ENABLED(GRADIENT_MIX) + //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #endif +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle +//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle +//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle + +// @section machine + +/** + * Power Supply Control + * + * Enable and connect the power supply to the PS_ON_PIN. + * Specify whether the power supply is active HIGH or active LOW. + */ +//#define PSU_CONTROL +//#define PSU_NAME "Power Supply" + +#if ENABLED(PSU_CONTROL) + #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2) + + //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80 + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define AUTO_POWER_CHAMBER_FAN + //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature + //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature + #define POWER_TIMEOUT 30 + #endif +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 + * 20 : Pt100 with circuit in the Ultimainboard V2.x + * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 67 : 450C thermistor from SliceEngineering + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * 1000 : Custom - Specify parameters in Configuration_adv.h + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + */ +#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_5 0 +#define TEMP_SENSOR_BED 331 +#define TEMP_SENSOR_CHAMBER 331 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target + +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target + +// Below this temperature the heater will be switched off +// because it probably indicates a broken thermistor wire. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define HEATER_5_MINTEMP 5 +#define BED_MINTEMP 5 + +// Above this temperature the heater will be switched off. +// This can protect components from overheating, but NOT from shorts and failures. +// (Use MINTEMP for thermistor short/failure protection.) +#define HEATER_0_MAXTEMP 410 +#define HEATER_1_MAXTEMP 410 +#define HEATER_2_MAXTEMP 410 +#define HEATER_3_MAXTEMP 410 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX 170 // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + #define DEFAULT_Kp 11.3 + #define DEFAULT_Ki 0.61 + #define DEFAULT_Kd 52.77 + +#endif // PIDTEMP + +//=========================================================================== +//====================== PID > Bed Temperature Control ====================== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + //#define MIN_BED_POWER 0 + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 18 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed +#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Enable pulldown for all endstops to prevent a floating state +//#define ENDSTOPPULLDOWNS +#if DISABLED(ENDSTOPPULLDOWNS) + // Disable ENDSTOPPULLDOWNS to set pulldowns individually + //#define ENDSTOPPULLDOWN_XMAX + //#define ENDSTOPPULLDOWN_YMAX + //#define ENDSTOPPULLDOWN_ZMAX + //#define ENDSTOPPULLDOWN_XMIN + //#define ENDSTOPPULLDOWN_YMIN + //#define ENDSTOPPULLDOWN_ZMIN + //#define ENDSTOPPULLDOWN_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, + * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE + * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define Z3_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 +//#define E5_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Threshold + * + * Enable if your probe or endstops falsely trigger due to noise. + * + * - Higher values may affect repeatability or accuracy of some bed probes. + * - To fix noise install a 100nF ceramic capacitor inline with the switch. + * - This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, which already have the 100nF capacitor. + * + * :[2,3,4,5,6,7] + */ +//#define ENDSTOP_NOISE_THRESHOLD 2 + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 53.45, 71.19, 160, 169.05 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 1000, 1000, 40, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Junction Deviation + * + * Use Junction Deviation instead of traditional Jerk Limiting + * + * See: + * https://reprap.org/forum/read.php?1,739819 + * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html + */ +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_PIN + * + * Define this pin if the probe is not connected to Z_MIN_PIN. + * If not defined the default pin for the selected MOTHERBOARD + * will be used. Most of the time the default is what you want. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + */ +//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH + +/** + * Touch-MI Probe by hotends.fr + * + * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. + * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is + * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. + * + * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, + * and a minimum Z_HOMING_HEIGHT of 10. + */ +//#define TOUCH_MI_PROBE +#if ENABLED(TOUCH_MI_PROBE) + #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts + //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed + //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) +#endif + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. +//#define RACK_AND_PINION_PROBE +#if ENABLED(RACK_AND_PINION_PROBE) + #define Z_PROBE_DEPLOY_X X_MIN_POS + #define Z_PROBE_RETRACT_X X_MAX_POS +#endif + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -21 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 22 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.54 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 20 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 12000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST 900 + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW 100 + +/** + * Multiple Probing + * + * You may get improved results by probing 2 or more times. + * With EXTRA_PROBING the more atypical reading(s) will be disregarded. + * + * A total of 2 does fast/slow probes with a weighted average. + * A total of 3 or more adds more slow probes, taking the average. + */ +#define MULTIPLE_PROBING 2 +//#define EXTRA_PROBING 1 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 1 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// Before deploy/stow pause for user confirmation +//#define PAUSE_BEFORE_DEPLOY_STOW +#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) + //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false + +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false +#define INVERT_E5_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 450 +#define Y_BED_SIZE 325 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -72 +#define Y_MIN_POS -84 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 400 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. + + // Set one or more commands to execute on filament runout. + // (After 'M412 H' Marlin will ask the host to handle the process.) + #define FILAMENT_RUNOUT_SCRIPT "M600" + + // After a runout is detected, continue printing this length of filament + // before executing the runout script. Useful for a sensor at the end of + // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. + //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + + #ifdef FILAMENT_RUNOUT_DISTANCE_MM + // Enable this option to use an encoder disc that toggles the runout pin + // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM + // large enough to avoid false positives.) + //#define FILAMENT_MOTION_SENSOR + #endif +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. + #endif + +#endif + +#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 5 + #define GRID_MAX_POINTS_Y 3 + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE)) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE)) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment + //#define MESH_EDIT_MENU // Add a menu to edit mesh points +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners + #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (6000) +#define HOMING_FEEDRATE_Z (900) + +// Validate that endstops are triggered on homing moves +#define VALIDATE_HOMING_ENDSTOPS + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +/** + * EEPROM + * + * Persistent storage to preserve configurable settings across reboots. + * + * M500 - Store settings to EEPROM. + * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) + * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) + */ +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +#if ENABLED(EEPROM_SETTINGS) + //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. +#endif + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_LABEL "PLA" +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z_raise } + #define NOZZLE_PARK_POINT { 225, -50, 5 } + #define NOZZLE_PARK_XY_FEEDRATE 150 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 15 // (mm/s) Z axis feedrate (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 4 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 2 + + // Specify positions as { X, Y, Z } . Leave Z blank to not change the Z position + #define NOZZLE_CLEAN_START_POINT { -37, -67, } + #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 8 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Move the nozzle to the initial position after cleaning + #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + #define NOZZLE_CLEAN_NO_Z +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cz, da, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * jp-kana, ko_KR, nl, pl, pt, pt-br, ru, sk, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp-kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * Info Screen Style (0:Classic, 1:Prusa) + * + * :[0:'Classic', 1:'Prusa'] + */ +#define LCD_INFO_SCREEN_STYLE 0 + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// This option reverses the encoder direction for Select Screen. +// +// If CLOCKWISE normally moves LEFT this makes it go RIGHT. +// If CLOCKWISE normally moves RIGHT this makes it go LEFT. +// +//#define REVERSE_SELECT_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// Original RADDS LCD Display+Encoder+SDCardReader +// http://doku.radds.org/dokumentation/lcd-display/ +// +//#define RADDS_DISPLAY + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +// +// 3-wire SR LCD with strobe using 74HC4094 +// https://github.com/mikeshub/SailfishLCD +// Uses the code directly from Sailfish +// +//#define FF_INTERFACEBOARD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// MKS MINI12864 with graphic controller and SD support +// https://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// FYSETC variant of the MINI12864 graphic controller with SD support +// https://wiki.fysetc.com/Mini12864_Panel/ +// +//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default +//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) +//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight +//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 +// A clone of the RepRapDiscount full graphics display but with +// different pins/wiring (see pins_ANET_10.h). +// +//#define ANET_FULL_GRAPHICS_LCD + +// +// AZSMZ 12864 LCD with SD +// https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html +// +//#define AZSMZ_12864 + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================== OLED Displays ============================== +//============================================================================= + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + #define U8GLIB_SSD1306 + //#define U8GLIB_SH1106 +#endif + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Einstart S OLED SSD1306 +// +//#define U8GLIB_SH1106_EINSTART + +// +// Overlord OLED display/controller with i2c buzzer and LEDs +// +//#define OVERLORD_OLED + +//============================================================================= +//========================== Extensible UI Displays =========================== +//============================================================================= + +// +// DGUS Touch Display with DWIN OS +// +//#define DGUS_LCD + +// +// Touch-screen LCD for Malyan M200 printers +// +//#define MALYAN_LCD + +// +// Third-party or vendor-customized controller interfaces. +// Sources should be installed in 'src/lcd/extensible_ui'. +// +//#define EXTENSIBLE_UI + +//============================================================================= +//=============================== Graphical TFTs ============================== +//============================================================================= + +// +// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, A1, etc.) +// +//#define FSMC_GRAPHICAL_TFT + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 +// +//#define TOUCH_BUTTONS +#if ENABLED(TOUCH_BUTTONS) + #define XPT2046_X_CALIBRATION 12316 + #define XPT2046_Y_CALIBRATION -8981 + #define XPT2046_X_OFFSET -43 + #define XPT2046_Y_OFFSET 257 +#endif + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +// :[0,1,2,3,4,5,6,7] +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +#define TEMP_STAT_LEDS + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +// Support for PCA9533 PWM LED driver +// https://github.com/mikeshub/SailfishRGB_LED +//#define PCA9533 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if EITHER(RGB_LED, RGBW_LED) + //#define RGB_LED_R_PIN 34 + //#define RGB_LED_G_PIN 43 + //#define RGB_LED_B_PIN 35 + //#define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + + // Use a single Neopixel LED for static (background) lighting + //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use + //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h new file mode 100644 index 000000000..ac27d2457 --- /dev/null +++ b/config/examples/HMS434/Configuration_adv.h @@ -0,0 +1,2565 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#define CONFIGURATION_ADV_H_VERSION 020000 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Custom Thermistor 1000 parameters +// +#if TEMP_SENSOR_0 == 1000 + #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define HOTEND0_BETA 3950 // Beta value +#endif + +#if TEMP_SENSOR_1 == 1000 + #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define HOTEND1_BETA 3950 // Beta value +#endif + +#if TEMP_SENSOR_2 == 1000 + #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define HOTEND2_BETA 3950 // Beta value +#endif + +#if TEMP_SENSOR_3 == 1000 + #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define HOTEND3_BETA 3950 // Beta value +#endif + +#if TEMP_SENSOR_4 == 1000 + #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define HOTEND4_BETA 3950 // Beta value +#endif + +#if TEMP_SENSOR_5 == 1000 + #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define HOTEND5_BETA 3950 // Beta value +#endif + +#if TEMP_SENSOR_BED == 1000 + #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define BED_BETA 3950 // Beta value +#endif + +#if TEMP_SENSOR_CHAMBER == 1000 + #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define CHAMBER_BETA 3950 // Beta value +#endif + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +/** + * Heated Chamber settings + */ +#if TEMP_SENSOR_CHAMBER + #define CHAMBER_MINTEMP 18 + #define CHAMBER_MAXTEMP 75 + #define TEMP_CHAMBER_HYSTERESIS 2 // (°C) Temperature proximity considered "close enough" to the target + //#define CHAMBER_LIMIT_SWITCHING + //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin + //#define HEATER_CHAMBER_INVERTING false +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) + //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 + #endif + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the heated chamber. + */ +#if ENABLED(THERMAL_PROTECTION_CHAMBER) + #define THERMAL_PROTECTION_CHAMBER_PERIOD 900 // Seconds + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + + /** + * Heated chamber watch settings (M141/M191). + */ + #define WATCH_CHAMBER_TEMP_PERIOD 900 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // Add an experimental additional term to the heater power, proportional to the extrusion speed. + // A well-chosen Kc value should add just enough power to melt the increased material volume. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) + #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 2.0 // compensate for 3V3 ref voltage +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +/** + * FAST PWM FAN Settings + * + * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) + * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a + * frequency as close as possible to the desired frequency. + * + * FAST_PWM_FAN_FREQUENCY [undefined by default] + * Set this to your desired frequency. + * If left undefined this defaults to F = F_CPU/(2*255*1) + * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers + * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required + * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. + * + * USE_OCR2A_AS_TOP [undefined by default] + * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: + * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] + * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] + * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of + * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) + * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. + */ +#if ENABLED(FAST_PWM_FAN) + //#define FAST_PWM_FAN_FREQUENCY 31400 + //#define USE_OCR2A_AS_TOP +#endif + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ + +#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 +#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed +#define CHAMBER_AUTO_FAN_TEMPERATURE 28 +#define CHAMBER_AUTO_FAN_SPEED 255 + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +// Employ an external closed loop controller. Override pins here if needed. +//#define EXTERNAL_CLOSED_LOOP_CONTROLLER +#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) + //#define CLOSED_LOOP_ENABLE_PIN -1 + //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 +#endif + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_TRIPLE_STEPPER_DRIVERS +#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) + //#define Z_TRIPLE_ENDSTOPS + #if ENABLED(Z_TRIPLE_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z3_USE_ENDSTOP _YMAX_ + #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 + #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + * + * The following Dual X Carriage modes can be selected with M605 S: + * + * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel + * results as long as it supports dual X-carriages. (M605 S0) + * + * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so + * that additional slicer support is not required. (M605 S1) + * + * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with + * the first X-carriage and extruder, to print 2 copies of the same object at the same time. + * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and + * follow with M605 S2 to initiate duplicated movement. + * + * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates + * the movement of the first except the second extruder is reversed in the X axis. + * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and + * follow with M605 S3 to initiate mirrored movement. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS + #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage + #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage + #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially +//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing + +// When G28 is called, this option will make Y home before X +#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +#if ENABLED(BLTOUCH) + /** + * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES + * Do not activate settings that the probe might not understand. Clones might misunderstand + * advanced commands. + * + * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then + * check the wiring of the BROWN, RED and ORANGE wires. + * + * Note: If the trigger signal of your probe is not being recognized, it has been very often + * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" + * like they would be with a real switch. So please check the wiring first. + * + * Settings for all BLTouch and clone probes: + */ + + // Safety: The probe needs time to recognize the command. + // Minimum command delay (ms). Enable and increase if needed. + //#define BLTOUCH_DELAY 500 + + /** + * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: + */ + + // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful + // in special cases, like noisy or filtered input configurations. + //#define BLTOUCH_FORCE_SW_MODE + + /** + * Settings for BLTouch Smart 3.0 and 3.1 + * Summary: + * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes + * - High-Speed mode + * - Disable LCD voltage options + */ + + /** + * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! + * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. + * If disabled, OD mode is the hard-coded default on 3.0 + * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * differs, a mode set eeprom write will be completed at initialization. + * Use the option below to force an eeprom write to a V3.1 probe regardless. + */ + //#define BLTOUCH_SET_5V_MODE + + /** + * Safety: Activate if connecting a probe with an unknown voltage mode. + * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 + * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) + * To preserve the life of the probe, use this once then turn it off and re-flash. + */ + //#define BLTOUCH_FORCE_MODE_SET + + /** + * Use "HIGH SPEED" mode for probing. + * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. + * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function + * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. + */ + //#define BLTOUCH_HS_MODE + + // Safety: Enable voltage mode settings in the LCD menu. + //#define BLTOUCH_LCD_VOLTAGE_MENU + +#endif // BLTOUCH + +/** + * Z Steppers Auto-Alignment + * Add the G34 command to align multiple Z steppers using a bed probe. + */ +//#define Z_STEPPER_AUTO_ALIGN +#if ENABLED(Z_STEPPER_AUTO_ALIGN) + // Define probe X and Y positions for Z1, Z2 [, Z3] + #define Z_STEPPER_ALIGN_X { 10, 150, 290 } + #define Z_STEPPER_ALIGN_Y { 290, 10, 290 } + // Set number of iterations to align + #define Z_STEPPER_ALIGN_ITERATIONS 3 + // Enable to restore leveling setup after operation + #define RESTORE_LEVELING_AFTER_G34 + + // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm + #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle + + // Use the amplification factor to de-/increase correction step. + // In case the stepper (spindle) position is further out than the test point + // Use a value > 1. NOTE: This may cause instability + #define Z_STEPPER_ALIGN_AMP 1.0 + // Stop criterion. If the accuracy is better than this stop iterating early + #define Z_STEPPER_ALIGN_ACC 0.02 +#endif + +// @section machine + +#define AXIS_RELATIVE_MODES { false, false, false, false } + +// Add a Duplicate option for well-separated conjoined nozzles +//#define MULTI_NOZZLE_DUPLICATION + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if EITHER(ULTIPANEL, EXTENSIBLE_UI) + #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) + #if ENABLED(ULTIPANEL) + #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" + #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen + #endif +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) + +// +// Backlash Compensation +// Adds extra movement to axes on direction-changes to account for backlash. +// +//#define BACKLASH_COMPENSATION +#if ENABLED(BACKLASH_COMPENSATION) + // Define values for backlash distance and correction. + // If BACKLASH_GCODE is enabled these values are the defaults. + #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) + #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction + + // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments + // to reduce print artifacts. (Enabling this is costly in memory and computation!) + //#define BACKLASH_SMOOTHING_MM 3 // (mm) + + // Add runtime configuration and tuning of backlash values (M425) + //#define BACKLASH_GCODE + + #if ENABLED(BACKLASH_GCODE) + // Measure the Z backlash when probing (G29) and set with "M425 Z" + #define MEASURE_BACKLASH_WHEN_PROBING + + #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) + // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT + // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION + // increments while checking for the contact to be broken. + #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) + #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) + #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) + #endif + #endif +#endif + +/** + * Automatic backlash, position and hotend offset calibration + * + * Enable G425 to run automatic calibration using an electrically- + * conductive cube, bolt, or washer mounted on the bed. + * + * G425 uses the probe to touch the top and sides of the calibration object + * on the bed and measures and/or correct positional offsets, axis backlash + * and hotend offsets. + * + * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within + * ±5mm of true values for G425 to succeed. + */ +//#define CALIBRATION_GCODE +#if ENABLED(CALIBRATION_GCODE) + + #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm + + #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m + #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m + #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m + + // The following parameters refer to the conical section of the nozzle tip. + #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm + #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm + + // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). + //#define CALIBRATION_REPORTING + + // The true location and dimension the cube/bolt/washer on the bed. + #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm + #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm + + // Comment out any sides which are unreachable by the probe. For best + // auto-calibration results, all sides must be reachable. + #define CALIBRATION_MEASURE_RIGHT + #define CALIBRATION_MEASURE_FRONT + #define CALIBRATION_MEASURE_LEFT + #define CALIBRATION_MEASURE_BACK + + // Probing at the exact top center only works if the center is flat. If + // probing on a screwhead or hollow washer, probe near the edges. + //#define CALIBRATION_MEASURE_AT_TOP_EDGES + + // Define pin which is read during calibration + #ifndef CALIBRATION_PIN + #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop + #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin + //#define CALIBRATION_PIN_PULLDOWN + #define CALIBRATION_PIN_PULLUP + #endif +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +/** + * Custom Microstepping + * Override as-needed for your setup. Up to 3 MS pins are supported. + */ +//#define MICROSTEP1 LOW,LOW,LOW +//#define MICROSTEP2 HIGH,LOW,LOW +//#define MICROSTEP4 LOW,HIGH,LOW +//#define MICROSTEP8 HIGH,HIGH,LOW +//#define MICROSTEP16 LOW,LOW,HIGH +//#define MICROSTEP32 HIGH,LOW,HIGH + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 + * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +// @section lcd + +// Change values more rapidly when the encoder is rotated faster +#define ENCODER_RATE_MULTIPLIER +#if ENABLED(ENCODER_RATE_MULTIPLIER) + #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed +#endif + +// Play a beep when the feedrate is changed from the Status Screen +//#define BEEP_ON_FEEDRATE_CHANGE +#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) + #define FEEDRATE_CHANGE_BEEP_DURATION 10 + #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 +#endif + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU +#if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages +#endif + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing + + //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files + + #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume + //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. + + // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, + // especially with "vase mode" printing. Set too high and vases cannot be continued. + #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + // Leave the heaters on after Stop Print (not recommended!) + //#define SD_ABORT_NO_COOLDOWN + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define SD_ABORT_ON_ENDSTOP_HIT + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + + /** + * Support for USB thumb drives using an Arduino USB Host Shield or + * equivalent MAX3421E breakout board. The USB thumb drive will appear + * to Marlin as an SD card. + * + * The MAX3421E must be assigned the same pins as the SD card reader, with + * the following pin mapping: + * + * SCLK, MOSI, MISO --> SCLK, MOSI, MISO + * INT --> SD_DETECT_PIN + * SS --> SDSS + */ + //#define USB_FLASH_DRIVE_SUPPORT + #if ENABLED(USB_FLASH_DRIVE_SUPPORT) + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + #endif + + /** + * When using a bootloader that supports SD-Firmware-Flashing, + * add a menu item to activate SD-FW-Update on the next reboot. + * + * Requires ATMEGA2560 (Arduino Mega) + * + * Tested with this bootloader: + * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 + */ + //#define SD_FIRMWARE_UPDATE + #if ENABLED(SD_FIRMWARE_UPDATE) + #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF + #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 + #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF + #endif + + // Add an optimized binary file transfer mode, initiated with 'M28 B1' + //#define BINARY_FILE_TRANSFER + + #if HAS_SDCARD_CONNECTION + /** + * Set this option to one of the following (or the board's defaults apply): + * + * LCD - Use the SD drive in the external LCD controller. + * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). + * + * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] + */ + //#define SDCARD_CONNECTION LCD + #endif + +#endif // SDSUPPORT + +/** + * By default an onboard SD card reader may be shared as a USB mass- + * storage device. This option hides the SD card from the host PC. + */ +//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if HAS_GRAPHICAL_LCD + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + #if ENABLED(U8GLIB_ST7920) + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + + /** + * Status (Info) Screen customizations + * These options may affect code size and screen render time. + * Custom status screens can forcibly override these settings. + */ + //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones + //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) + #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) + #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating + #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating + #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating + //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap + //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap + //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames + //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + + // Frivolous Game Options + //#define MARLIN_BRICKOUT + //#define MARLIN_INVADERS + //#define MARLIN_SNAKE + //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu + +#endif // HAS_GRAPHICAL_LCD + +// @section safety + +/** + * The watchdog hardware timer will do a reset and disable all outputs + * if the firmware gets too overloaded to read the temperature sensors. + * + * If you find that watchdog reboot causes your AVR board to hang forever, + * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. + * NOTE: This method is less reliable as it can only catch hangups while + * interrupts are enabled. + */ +#define USE_WATCHDOG +#if ENABLED(USE_WATCHDOG) + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_WITHOUT_HOMING + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 16 // Babysteps are very small. Increase for faster motion. + + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. + #if ENABLED(MOVE_Z_WHEN_IDLE) + #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #endif + #endif + + //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + + //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #endif +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.02 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +/** + * Repeatedly attempt G29 leveling until it succeeds. + * Stop after G29_MAX_RETRIES attempts. + */ +//#define G29_RETRY_AND_RECOVER +#if ENABLED(G29_RETRY_AND_RECOVER) + #define G29_MAX_RETRIES 3 + #define G29_HALT_ON_FAILURE + /** + * Specify the GCODE commands that will be executed when leveling succeeds, + * between attempts, and after the maximum number of retries have been tried. + */ + #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." + #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" + #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" + +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle + #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +/** + * G38 Probe Target + * + * This option adds G38.2 and G38.3 (probe towards target) + * and optionally G38.4 and G38.5 (probe away from target). + * Set MULTIPLE_PROBING for G38 to probe more than once. + */ +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target + #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 400 : Minimum for A5984 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 0 : Minimum 500ns for LV8729, adjusted in stepper.h + * 1 : Minimum for A4988 and A5984 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 200000 : Maximum for LV8729 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 8 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 8 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 32 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + #define SERIAL_XON_XOFF +#endif + +// Add M575 G-code to change the baud rate +//#define BAUD_RATE_GCODE + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +#define ADVANCED_OK + +// Printrun may have trouble receiving long strings all at once. +// This option inserts short delays between lines of serial output. +#define SERIAL_OVERRUN_PROTECTION + +// @section extras + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT +#if ENABLED(FWRETRACT) + #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM + #if ENABLED(FWRETRACT_AUTORETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #endif + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZRAISE 0 // Default retract Z-raise (mm) + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) + #if ENABLED(MIXING_EXTRUDER) + //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously + #endif +#endif + +/** + * Universal tool change settings. + * Applies to all types of extruders except where explicitly noted. + */ +#if EXTRUDERS > 1 + // Z raise distance for tool-change, as needed for some extruders + #define TOOLCHANGE_ZRAISE 2 // (mm) + //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change + + // Retract and prime filament on tool-change + //#define TOOLCHANGE_FILAMENT_SWAP + #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) + #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) + #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) + #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) + #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) + #endif + + /** + * Position to park head during tool change. + * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER + */ + //#define TOOLCHANGE_PARK + #if ENABLED(TOOLCHANGE_PARK) + #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } + #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) + #endif +#endif + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 30 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. + //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #if AXIS_DRIVER_TYPE_X(TMC26X) + #define X_MAX_CURRENT 1000 // (mA) + #define X_SENSE_RESISTOR 91 // (mOhms) + #define X_MICROSTEPS 16 // Number of microsteps + #endif + + #if AXIS_DRIVER_TYPE_X2(TMC26X) + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_Y(TMC26X) + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_Y2(TMC26X) + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_Z(TMC26X) + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_Z2(TMC26X) + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_Z3(TMC26X) + #define Z3_MAX_CURRENT 1000 + #define Z3_SENSE_RESISTOR 91 + #define Z3_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_E0(TMC26X) + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_E1(TMC26X) + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_E2(TMC26X) + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_E3(TMC26X) + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_E4(TMC26X) + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_E5(TMC26X) + #define E5_MAX_CURRENT 1000 + #define E5_SENSE_RESISTOR 91 + #define E5_MICROSTEPS 16 + #endif + +#endif // TMC26X + +// @section tmc_smart + +/** + * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode + * connect your SPI pins to the hardware SPI interface on your board and define + * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 + * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN + * to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without + * a resistor. + * The drivers can also be used with hardware serial. + * + * TMCStepper library is required to use TMC stepper drivers. + * https://github.com/teemuatlut/TMCStepper + */ +#if HAS_TRINAMIC + + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #if AXIS_IS_TMC(X) + #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_MICROSTEPS 16 // 0..256 + #define X_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(X2) + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + #define X2_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(Y) + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + #define Y_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(Y2) + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + #define Y2_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(Z) + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + #define Z_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(Z2) + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + #define Z2_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(Z3) + #define Z3_CURRENT 800 + #define Z3_MICROSTEPS 16 + #define Z3_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(E0) + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + #define E0_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(E1) + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + #define E1_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(E2) + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + #define E2_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(E3) + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + #define E3_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(E4) + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + #define E4_RSENSE 0.11 + #endif + + #if AXIS_IS_TMC(E5) + #define E5_CURRENT 800 + #define E5_MICROSTEPS 16 + #define E5_RSENSE 0.11 + #endif + + /** + * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. + * The default pins can be found in your board's pins file. + */ + //#define X_CS_PIN -1 + //#define Y_CS_PIN -1 + //#define Z_CS_PIN -1 + //#define X2_CS_PIN -1 + //#define Y2_CS_PIN -1 + //#define Z2_CS_PIN -1 + //#define Z3_CS_PIN -1 + //#define E0_CS_PIN -1 + //#define E1_CS_PIN -1 + //#define E2_CS_PIN -1 + //#define E3_CS_PIN -1 + //#define E4_CS_PIN -1 + //#define E5_CS_PIN -1 + + /** + * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. + * Set the address using jumpers on pins MS1 and MS2. + * Address | MS1 | MS2 + * 0 | LOW | LOW + * 1 | HIGH | LOW + * 2 | LOW | HIGH + * 3 | HIGH | HIGH + * + * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers + * on the same serial port, either here or in your board's pins file. + */ + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 0 + #define Z_SLAVE_ADDRESS 0 + #define X2_SLAVE_ADDRESS 0 + #define Y2_SLAVE_ADDRESS 0 + #define Z2_SLAVE_ADDRESS 0 + #define Z3_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 0 + #define E1_SLAVE_ADDRESS 0 + #define E2_SLAVE_ADDRESS 0 + #define E3_SLAVE_ADDRESS 0 + #define E4_SLAVE_ADDRESS 0 + #define E5_SLAVE_ADDRESS 0 + + /** + * Software enable + * + * Use for drivers that do not use a dedicated enable pin, but rather handle the same + * function through a communication line such as SPI or UART. + */ + //#define SOFTWARE_DRIVER_ENABLE + + /** + * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP_XY + #define STEALTHCHOP_Z + #define STEALTHCHOP_E + + /** + * Optimize spreadCycle chopper parameters by using predefined parameter sets + * or with the help of an example included in the library. + * Provided parameter sets are + * CHOPPER_DEFAULT_12V + * CHOPPER_DEFAULT_19V + * CHOPPER_DEFAULT_24V + * CHOPPER_DEFAULT_36V + * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) + * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 + * + * Define you own with + * { , , hysteresis_start[1..8] } + */ + #define CHOPPER_TIMING CHOPPER_DEFAULT_12V + + /** + * Monitor Trinamic drivers for error conditions, + * like overtemperature and short to ground. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define Z3_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + #define E5_HYBRID_THRESHOLD 30 + + /** + * Use StallGuard2 to home / probe X, Y, Z. + * + * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only + * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_STALL_SENSITIVITY is used to tune the trigger sensitivity. + * Use M914 X Y Z to live-adjust the sensitivity. + * Higher: LESS sensitive. (Too high => failure to trigger) + * Lower: MORE sensitive. (Too low => false positives) + * + * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. + * + * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** + * Poll the driver through SPI to determine load when homing. + * Removes the need for a wire from DIAG1 to an endstop pin. + * + * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when + * homing and adds a guard period for endstop triggering. + */ + //#define SENSORLESS_HOMING // StallGuard capable drivers only + + /** + * Use StallGuard2 to probe the bed with the nozzle. + * + * CAUTION: This could cause damage to machines that use a lead screw or threaded rod + * to move the Z axis. Take extreme care when attempting to enable this feature. + */ + //#define SENSORLESS_PROBING // StallGuard capable drivers only + + #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) + // TMC2209: 0...255. TMC2130: -64...63 + #define X_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 8 + //#define Z_STALL_SENSITIVITY 8 + //#define SPI_ENDSTOPS // TMC2130 only + //#define IMPROVE_HOMING_RELIABILITY + #endif + + /** + * Beta feature! + * Create a 50/50 square wave step pulse optimal for stepper drivers. + */ + //#define SQUARE_WAVE_STEPPING + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMCStepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // HAS_TRINAMIC + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * Arduino-L6470 library (0.7.0 or higher) is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + * + * Requires the following to be defined in your pins_YOUR_BOARD file + * L6470_CHAIN_SCK_PIN + * L6470_CHAIN_MISO_PIN + * L6470_CHAIN_MOSI_PIN + * L6470_CHAIN_SS_PIN + * L6470_RESET_CHAIN_PIN (optional) + */ +#if HAS_DRIVER(L6470) + + //#define L6470_CHITCHAT // Display additional status info + + #if AXIS_DRIVER_TYPE_X(L6470) + #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) + #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current (VALID: 375 x (1 - 16) - 6A max - rounds down) + #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) + #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper + #define X_CHAIN_POS 0 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI + #endif + + #if AXIS_DRIVER_TYPE_X2(L6470) + #define X2_MICROSTEPS 128 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + #define X2_MAX_VOLTAGE 127 + #define X2_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_Y(L6470) + #define Y_MICROSTEPS 128 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + #define Y_MAX_VOLTAGE 127 + #define Y_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_Y2(L6470) + #define Y2_MICROSTEPS 128 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + #define Y2_MAX_VOLTAGE 127 + #define Y2_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_Z(L6470) + #define Z_MICROSTEPS 128 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + #define Z_MAX_VOLTAGE 127 + #define Z_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_Z2(L6470) + #define Z2_MICROSTEPS 128 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + #define Z2_MAX_VOLTAGE 127 + #define Z2_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_Z3(L6470) + #define Z3_MICROSTEPS 128 + #define Z3_OVERCURRENT 2000 + #define Z3_STALLCURRENT 1500 + #define Z3_MAX_VOLTAGE 127 + #define Z3_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_E0(L6470) + #define E0_MICROSTEPS 128 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + #define E0_MAX_VOLTAGE 127 + #define E0_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_E1(L6470) + #define E1_MICROSTEPS 128 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + #define E1_MAX_VOLTAGE 127 + #define E1_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_E2(L6470) + #define E2_MICROSTEPS 128 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + #define E2_MAX_VOLTAGE 127 + #define E2_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_E3(L6470) + #define E3_MICROSTEPS 128 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + #define E3_MAX_VOLTAGE 127 + #define E3_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_E4(L6470) + #define E4_MICROSTEPS 128 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + #define E4_MAX_VOLTAGE 127 + #define E4_CHAIN_POS 0 + #endif + + #if AXIS_DRIVER_TYPE_E5(L6470) + #define E5_MICROSTEPS 128 + #define E5_OVERCURRENT 2000 + #define E5_STALLCURRENT 1500 + #define E5_MAX_VOLTAGE 127 + #define E5_CHAIN_POS 0 + #endif + + /** + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ + //#define MONITOR_L6470_DRIVER_STATUS + + #if ENABLED(MONITOR_L6470_DRIVER_STATUS) + #define KVAL_HOLD_STEP_DOWN 1 + //#define L6470_STOP_ON_ERROR + #endif + +#endif // L6470 + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Photo G-code + * Add the M240 G-code to take a photo. + * The photo can be triggered by a digital pin or a physical movement. + */ +//#define PHOTO_GCODE +#if ENABLED(PHOTO_GCODE) + // A position to move to (and raise Z) before taking the photo + //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) + //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) + //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) + + // Canon RC-1 or homebrew digital camera trigger + // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ + //#define PHOTOGRAPH_PIN 23 + + // Canon Hack Development Kit + // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + //#define CHDK_PIN 4 + + // Optional second move with delay to trigger the camera shutter + //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) + + // Duration to hold the switch or keep CHDK_PIN high + //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) +#endif + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_FEATURE +//#define LASER_FEATURE +#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) + #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH + #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop + + #if ENABLED(SPINDLE_FEATURE) + //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction + #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction + #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + #else + #define SPEED_POWER_SLOPE 0.3922 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 10 + #define SPEED_POWER_MAX 100 // 0-100% + #endif +#endif + +/** + * Coolant Control + * + * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. + * + * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. + */ +//#define COOLANT_CONTROL +#if ENABLED(COOLANT_CONTROL) + #define COOLANT_MIST // Enable if mist coolant is present + #define COOLANT_FLOOD // Enable if flood coolant is present + #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed + #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * CNC G-code options + * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. + * Note that G0 feedrates should be used with care for 3D printing (if used at all). + * High feedrates may cause ringing and harm print quality. + */ +//#define PAREN_COMMENTS // Support for parentheses-delimited comments +//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. + +// Enable and set a (default) feedrate for all G0 moves +//#define G0_FEEDRATE 3000 // (mm/m) +#ifdef G0_FEEDRATE + //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode +#endif + +/** + * G-code Macros + * + * Add G-codes M810-M819 to define and run G-code macros. + * Macros are not saved to EEPROM. + */ +//#define GCODE_MACROS +#if ENABLED(GCODE_MACROS) + #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used + #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro +#endif + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + //#define CUSTOM_USER_MENU_TITLE "Custom Commands" + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Host Action Commands + * + * Define host streamer action commands in compliance with the standard. + * + * See https://reprap.org/wiki/G-code#Action_commands + * Common commands ........ poweroff, pause, paused, resume, resumed, cancel + * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed + * + * Some features add reason codes to extend these commands. + * + * Host Prompt Support enables Marlin to use the host for user prompts so + * filament runout and other processes can be managed from the host side. + */ +//#define HOST_ACTION_COMMANDS +#if ENABLED(HOST_ACTION_COMMANDS) + //#define HOST_PROMPT_SUPPORT +#endif + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reliabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behavior. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order + //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side + + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behavior is limited to Z axis only. +#endif + +/** + * WiFi Support (Espressif ESP32 WiFi) + */ +//#define WIFISUPPORT +#if ENABLED(WIFISUPPORT) + #define WIFI_SSID "Wifi SSID" + #define WIFI_PWD "Wifi Password" + //#define WEBSUPPORT // Start a webserver with auto-discovery + //#define OTASUPPORT // Support over-the-air firmware updates +#endif + +/** + * Prusa Multi-Material Unit v2 + * Enable in Configuration.h + */ +#if ENABLED(PRUSA_MMU2) + + // Serial port used for communication with MMU2. + // For AVR enable the UART port used for the MMU. (e.g., internalSerial) + // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) + #define INTERNAL_SERIAL_PORT 2 + #define MMU2_SERIAL internalSerial + + // Use hardware reset for MMU if a pin is defined for it + //#define MMU2_RST_PIN 23 + + // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) + //#define MMU2_MODE_12V + + // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout + #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" + + // Add an LCD menu for MMU2 + //#define MMU2_MENUS + #if ENABLED(MMU2_MENUS) + // Settings for filament load / unload from the LCD menu. + // This is for Prusa MK3-style extruders. Customize for your hardware. + #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 + #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ + { 7.2, 562 }, \ + { 14.4, 871 }, \ + { 36.0, 1393 }, \ + { 14.4, 871 }, \ + { 50.0, 198 } + + #define MMU2_RAMMING_SEQUENCE \ + { 1.0, 1000 }, \ + { 1.0, 1500 }, \ + { 2.0, 2000 }, \ + { 1.5, 3000 }, \ + { 2.5, 4000 }, \ + { -15.0, 5000 }, \ + { -14.0, 1200 }, \ + { -6.0, 600 }, \ + { 10.0, 700 }, \ + { -10.0, 400 }, \ + { -50.0, 2000 } + + #endif + + //#define MMU2_DEBUG // Write debug info to serial output + +#endif // PRUSA_MMU2 + +/** + * Advanced Print Counter settings + */ +#if ENABLED(PRINTCOUNTER) + #define SERVICE_WARNING_BUZZES 3 + // Activate up to 3 service interval watchdogs + #define SERVICE_NAME_1 "Lubricate axis" + #define SERVICE_INTERVAL_1 100 // print hours + #define SERVICE_NAME_2 "Change X an Y belt" + #define SERVICE_INTERVAL_2 300 // print hours + #define SERVICE_NAME_3 "Change Z belt" + #define SERVICE_INTERVAL_3 1000 // print hours +#endif + +// @section develop + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +#define PINS_DEBUGGING + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index d60bdece1..ac7242120 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2037,6 +2038,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 870a7a1c0..bcedda43f 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ //#define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 43436a4e4..16577c8bc 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -81,7 +81,7 @@ #define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes. #define SHOW_BOOTSCREEN #define STRING_SPLASH_LINE1 "JG-A1 v2.0 (29-7-19)" // will be shown during bootup in line 1 -#define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2 +#define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2 /** * *** VENDORS PLEASE READ *** @@ -364,6 +364,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -407,7 +408,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2041,6 +2042,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 558c7dbc8..943e9c3a7 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -284,9 +284,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -662,10 +663,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -855,11 +856,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -884,23 +909,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -935,6 +943,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1139,6 +1148,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1148,6 +1158,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2247,6 +2304,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2301,6 +2365,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 0fbcf2ec0..c6a91a056 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -364,6 +364,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -407,7 +408,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 15 // manual calibration of thermistor in JGAurora A5 hotend #define TEMP_SENSOR_1 0 @@ -2045,6 +2046,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index d1a29c977..81a716012 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 898d333ca..23d8d4749 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -81,7 +81,7 @@ #define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes. #define SHOW_BOOTSCREEN #define STRING_SPLASH_LINE1 "JG-A5S v2.0 (29-7-19)" // will be shown during bootup in line 1 -#define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2 +#define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2 /** * *** VENDORS PLEASE READ *** @@ -364,6 +364,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -407,7 +408,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2041,6 +2042,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 558c7dbc8..943e9c3a7 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -284,9 +284,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -662,10 +663,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -855,11 +856,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -884,23 +909,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -935,6 +943,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1139,6 +1148,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1148,6 +1158,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2247,6 +2304,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2301,6 +2365,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 4700d5878..e9fef1871 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -379,6 +379,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -422,7 +423,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2053,6 +2054,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index b2a62ba97..06c86f51e 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 890b8d4c7..c537d13bd 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -364,6 +364,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -407,7 +408,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2061,6 +2062,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index e88b18043..512869bae 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 39fbccdaf..4fb2a3691 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 11 #define TEMP_SENSOR_1 0 @@ -2030,7 +2031,13 @@ // // Touch-screen LCD for Malyan M200 printers // -//#define MALYAN_LCD +#define MALYAN_LCD + +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI // // Third-party or vendor-customized controller interfaces. @@ -2051,15 +2058,6 @@ //============================ Other Controllers ============================ //============================================================================= -// -// CONTROLLER TYPE: Standalone / Serial -// - -// -// LCD for Malyan M200 printers. -// -#define MALYAN_LCD - // // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 // diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index e2b77c9b2..7a114194e 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Malyan/M200/README.md b/config/examples/Malyan/M200/README.md new file mode 100644 index 000000000..84490786e --- /dev/null +++ b/config/examples/Malyan/M200/README.md @@ -0,0 +1,33 @@ +### Malyan M200 Build Instructions + +Malyan M200 series firmware currently builds using the Arduino IDE. These instructions should +guide you through the configuration and compilation. + +1. Install the Arduino IDE from your favorite source (arduino.cc, windows store, app store) +2. Launch the IDE to add the ST boards manager: + - Open the **Preferences** dialog. + - Add this link in the "*Additional Boards Managers URLs*" field: + https://github.com/stm32duino/BoardManagerFiles/raw/master/STM32/package_stm_index.json + - Select "**Show verbose ouptut during: compilation**." +3. Select **Tools** > **Board** > **Boards Manager**. +4. Type "Malyan" into the Search field. +5. The only board listed will be "**STM32 Cores by STMicroelectronics**." Any version from 1.6.0 up is fine. Choose install. This will download many tools and packages, be patient. +6. Open the **Tools** > **Board** submenu, scroll all the way down, and select **3D Printer Boards**. +7. From the **Tools** menu, select a board part number: + - If you own a M200 V1 or early run (black V2), choose **Malyan M200 V1**. + - If you own a M200 V2 later run (white/black) or V3 (Pro), choose **Malyan M200 V2** (The V2 and V3 both share an STM32F070 MCU). Note that the V3 pinout is not complete (autolevel doesn't work as of this writing). +8. From the **Tools** menu, choose **USB Support** > **CDC No Generic Serial**. +9. Download the latest Marlin source (from the [bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x) branch) and unzip it. +10. Look in the `Marlin` subdirectory for the `Configuration.h` and `Configuration_adv.h` files. Replace these files with the configurations in the `config\examples\Malyan\M200` folder. +11. If you have an early-run V2, the steps-per-mm are roughly half. Consult the [mpminipro.com wiki](https://mpminipro.com/) for the steps that apply to your unit. Modify `Configuration.h`. +12. Inverting Axis. There's no pattern to axes will need to be inverted. The only way to know is to test your particular printer. If you *do* know, go ahead and invert the correct axes. +13. Open the `Marlin/Marlin.ino` file in Arduino IDE. +14. From the **Sketch** menu, select **File** > **Export Compiled Binary**. +15. When compilation is done you've built the firmware. The next stage is to flash it to the board. To do this look for a line like this: `"path/to/bin/arm-none-eabi-objcopy" -O binary "/path/to/Marlin.ino.elf" "/path/to/Marlin.ino.bin"` + The file `Marlin.ino.bin` is your firmware binary. M200 (v1-3) and M300 printers require flashing via SD card. Use the SD card that came with the printer if possible. The bootloader is very picky about SD cards. Copy `Marlin.ino.bin` to your SD card under three names: `firmware.bin`, `update.bin`, and `fcupdate.flg`. +16. Insert the SD card into your printer. Make sure the X and Y axes are centered in the middle of the bed. (When X and Y endstops are closed this signals a UI upgrade to the bootloader.) +17. Power-cycle the printer. The first flash may take longer. Don't be surprised if the .99 version number doesn't show up until after the UI has launched the default screen. +18. Remove the SD card and delete the `fcupdate.flg` file from the card to prevent an accidental re-flash. +19. Test the endstops and homing directions, run M303 PID autotune, and verify all features are working correctly. + +Welcome to Marlin 2.x... diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 44fc963c8..7b8b886fc 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2037,6 +2038,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 9a2867bc3..02178a99d 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2037,6 +2038,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index addbfce9e..fad464ffd 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index b8d3e6028..233874164 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -360,6 +360,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -403,7 +404,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 1 @@ -2035,6 +2036,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index d132396cb..7ae20a650 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index e9c7159e5..dd5e3a92a 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 203eb26e1..23fc1fe5a 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -851,11 +852,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -880,23 +905,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -931,6 +939,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1135,6 +1144,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1144,6 +1154,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2243,6 +2300,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2297,6 +2361,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index d6085cf86..f9951a0df 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -360,6 +360,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -403,7 +404,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2041,6 +2042,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index c54e61394..6a8fa23db 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 6aa146c16..564aeb7ce 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 62a91b1b5..4b091a358 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2082,6 +2083,12 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 1d84a5766..0900fa81a 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 413bf07ff..797387934 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -362,6 +362,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -405,7 +406,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 641797b46..29beb2803 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -279,9 +279,10 @@ */ #define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 4 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + #define CONTROLLER_FAN_PIN 4 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h index cbd0e8930..a7a02c0f8 100644 --- a/config/examples/SCARA/Configuration.h +++ b/config/examples/SCARA/Configuration.h @@ -386,6 +386,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -429,7 +430,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2042,6 +2043,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h index 2f4b9bdbf..a52009420 100644 --- a/config/examples/SCARA/Configuration_adv.h +++ b/config/examples/SCARA/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full //#define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 017a763e1..0903dae3f 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 1 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 892f9653e..1d3b8b42a 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h index 1ea7b3636..8827cc542 100644 --- a/config/examples/STM32/STM32F10/Configuration.h +++ b/config/examples/STM32/STM32F10/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #warning temp_sensor set to 998/999 (fake) #define TEMP_SENSOR_0 999 @@ -2035,6 +2036,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index b5171a41a..dfa52035c 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h index 8a09ecc75..abda3c7f1 100644 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ b/config/examples/STM32/stm32f103ret6/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #warning temp_sensor set to 998/999 (fake) #define TEMP_SENSOR_0 999 @@ -2035,6 +2036,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index bd7d65d97..2782705ee 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2064,6 +2065,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 3be52a3d7..aff0f69c4 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index af248d4d0..f41e67e95 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2038,6 +2039,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 8088e6170..eb5261e51 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -656,10 +657,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -849,11 +850,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -878,23 +903,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -929,6 +937,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1133,6 +1142,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1142,6 +1152,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2241,6 +2298,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2295,6 +2359,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index d8e320226..9c8b56ba0 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2031,6 +2032,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index ba2838391..62650eeee 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -653,10 +654,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -846,11 +847,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -875,23 +900,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -926,6 +934,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1130,6 +1139,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1139,6 +1149,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2238,6 +2295,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2292,6 +2356,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 1b6648a8f..c6f0ac9df 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2038,6 +2039,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 46dce6366..db6cec45c 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -656,10 +657,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -849,11 +850,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -878,23 +903,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -929,6 +937,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1133,6 +1142,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1142,6 +1152,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2241,6 +2298,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2295,6 +2359,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 73088c938..7b3400c76 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2038,6 +2039,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 46dce6366..db6cec45c 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -656,10 +657,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -849,11 +850,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -878,23 +903,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -929,6 +937,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1133,6 +1142,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1142,6 +1152,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2241,6 +2298,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2295,6 +2359,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 72e55c5f6..64a6401dc 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index e4c6ffe2c..3518468a1 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 74d71e45f..8760e16c6 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -381,6 +381,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -424,7 +425,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2089,6 +2090,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index ccf77020e..f7b23bf06 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 40f36f0b0..be6edb032 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 11 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 3bc50c851..3237a3727 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 6 #define TEMP_SENSOR_1 0 @@ -2037,6 +2038,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index f301ee472..c8f31e0ec 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index ac5465eed..e507b9754 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -361,6 +361,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -404,7 +405,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2054,6 +2055,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 931703001..bed7da7c9 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 9727dae89..dfb7f0ce2 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 113327327..6d2071e3b 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2044,6 +2045,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 0e1493bf6..34654579b 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 19b8079f5..218f05364 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index babab7bd4..5e088041a 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 7c06591c9..0fefd7fc8 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 072932261..9b379f5e8 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 5 @@ -2042,6 +2043,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 72e79adc7..81db57b4e 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index a67195e5e..54adde7b6 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -379,6 +379,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -422,7 +423,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2031,6 +2032,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 1c9ebd39c..1aa123208 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -292,9 +292,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -670,10 +671,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -863,11 +864,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -892,23 +917,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -943,6 +951,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1147,6 +1156,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1156,6 +1166,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2255,6 +2312,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2309,6 +2373,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h index 2671f81e1..f14fd6d37 100644 --- a/config/examples/Velleman/K8400/Configuration.h +++ b/config/examples/Velleman/K8400/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h index 104c6c0bd..a8d998f0e 100644 --- a/config/examples/Velleman/K8400/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Configuration_adv.h @@ -279,9 +279,10 @@ */ #define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index ee191b328..cb02c225b 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 5 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index b4fffdcfd..2cb98a24a 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -378,6 +378,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -421,7 +422,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 0 @@ -2052,6 +2053,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 417819c9e..bb0d1f961 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) #define POWER_LOSS_PIN 65 // Pin to detect power loss #define POWER_LOSS_STATE LOW // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 7de297840..60533157f 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 20 #define TEMP_SENSOR_1 0 @@ -2046,6 +2047,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index dadd39b81..6c22876ce 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index f32ae7ae9..198b35814 100755 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -90,7 +90,7 @@ */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 13 #define TEMP_SENSOR_1 0 @@ -1895,7 +1896,7 @@ // MakerLab Mini Panel with graphic // controller and SD support - http://reprap.org/wiki/Mini_panel // -//#define MINIPANEL +#define MINIPANEL // // MaKr3d Makr-Panel with graphic controller and SD support. @@ -1936,7 +1937,7 @@ // MKS MINI12864 with graphic controller and SD support // https://reprap.org/wiki/MKS_MINI_12864 // -#define MKS_MINI_12864 +//#define MKS_MINI_12864 // // FYSETC variant of the MINI12864 graphic controller with SD support @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index ecd538e7c..fe8cc7bd0 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/Wanhao/Duplicator i3 Mini/_Bootscreen.h b/config/examples/Wanhao/Duplicator i3 Mini/_Bootscreen.h new file mode 100755 index 000000000..b647f4633 --- /dev/null +++ b/config/examples/Wanhao/Duplicator i3 Mini/_Bootscreen.h @@ -0,0 +1,53 @@ +/** + * Made with Marlin Bitmap Converter + * http://marlinfw.org/tools/u8glib/converter.html + */ +#define CUSTOM_BOOTSCREEN_BMPWIDTH 80 +#define CUSTOM_BOOTSCREEN_Y 3 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00110111,B00000000,B01111111,B10111100,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B10111111,B10000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B01111111,B11000000,B00000000, + B00000000,B00000000,B00000000,B00011111,B11101111,B11111111,B11111111,B01111111,B11111111,B00000000, + B00000000,B00000000,B00000000,B00111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11100000, + B00000000,B00000000,B00000000,B11111111,B11101111,B11111111,B11111111,B11111111,B11100000,B00110000, + B00000000,B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B00000000, + B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B00000000, + B00000000,B00000000,B00110111,B11111111,B11111111,B11111111,B11111111,B01111111,B11110000,B00000000, + B00000000,B00010111,B11110111,B11111111,B11101111,B11111111,B11111111,B01111111,B11110000,B00000000, + B00000000,B00011111,B11110111,B11111111,B11101111,B11111111,B11111111,B01111111,B11110000,B00000000, + B00000000,B00001111,B11110111,B11111111,B11111111,B11111111,B11111111,B10111111,B11111000,B00000000, + B00000000,B00001111,B11110111,B11111111,B11110111,B11111111,B11111111,B10111111,B11111000,B00000000, + B00000000,B00001111,B11111111,B11111111,B11110111,B11111111,B11111111,B10111111,B11111100,B00000000, + B00000000,B00001111,B11111011,B11111111,B11110111,B11111111,B11111111,B10111111,B11111100,B00000000, + B00000000,B00001111,B11111011,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000000, + B00000000,B10001111,B11111101,B11111111,B11111011,B11111111,B11111111,B11011111,B11111000,B00000000, + B00000000,B11111111,B11111100,B11111111,B11111011,B11111111,B11111111,B10111111,B11110110,B00000000, + B00000100,B01111111,B11111110,B11111111,B11111011,B11111111,B11111111,B00011111,B11101111,B00000000, + B00000110,B01111111,B11111111,B00100101,B11111011,B11111111,B11111100,B11101111,B11011111,B10000000, + B00000111,B11111111,B11111111,B00111110,B01110000,B11111111,B11110000,B11110011,B11011111,B11000000, + B00000011,B11111111,B11111100,B00111111,B10000000,B00001111,B10000000,B01111101,B10111111,B11000000, + B00000001,B11111111,B11111000,B00011111,B11011000,B00000000,B00000000,B11111111,B10111111,B10000000, + B00000001,B11111111,B11100000,B00001111,B11011111,B00000000,B00000001,B11111111,B00011111,B10000000, + B00000000,B01111111,B11000000,B00001111,B11111111,B10000000,B00000011,B11111110,B00011111,B00000000, + B00000000,B00111111,B10000000,B00001111,B10111111,B10000000,B00000011,B11111000,B00111111,B00000000, + B00000000,B00111111,B00000000,B00001111,B10011111,B11000000,B00000111,B11000000,B00111110,B00000000, + B00000000,B00011100,B00000000,B00011111,B00000000,B11000000,B00001111,B11000000,B01111110,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000011,B10001100,B01110000,B11100000,B11100000,B11001100,B00011100,B00011000,B00000111,B11000000, + B00000011,B10011100,B01110000,B11110000,B11110001,B11001110,B00011100,B00111100,B00001111,B11100000, + B00000011,B10011100,B01110001,B11110000,B11110001,B11001110,B00011100,B00111100,B00011111,B11110000, + B00000011,B10011100,B01110001,B11110000,B11111001,B11001110,B00011100,B01111110,B00111100,B01111000, + B00000011,B10011100,B01110001,B11111000,B11111101,B11001111,B11111100,B01111110,B00111000,B00111000, + B00000001,B10011110,B11100011,B10111000,B11111111,B11001111,B11111100,B01100111,B00111000,B00011000, + B00000001,B11011110,B11100011,B10111000,B11101111,B11001111,B11111100,B11100111,B00111000,B00111000, + B00000001,B11111111,B11000011,B11111100,B11100111,B11001110,B00011100,B11111111,B00111100,B00111000, + B00000000,B11110111,B11000111,B11111100,B11100011,B11001110,B00011100,B11111111,B10011111,B11110000, + B00000000,B11110011,B10000111,B00011110,B11100011,B11001110,B00011101,B11100011,B10001111,B11110000, + B00000000,B01110011,B10000111,B00001110,B11100001,B11001110,B00011101,B11000011,B11000111,B11000000 +}; diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index e484c1ef4..c7ce14d12 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2033,6 +2034,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 9bc449848..3dc1a75c3 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -91,7 +91,7 @@ #define STRING_CONFIG_H_AUTHOR "@brandstaetter, @grbd" // Who made the changes. #define SHOW_BOOTSCREEN #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 -#define STRING_SPLASH_LINE2 "Welcome to ANYCUBIC" // will be shown during bootup in line 2 +#define STRING_SPLASH_LINE2 "Welcome to ANYCUBIC" // will be shown during bootup in line 2 /** * *** VENDORS PLEASE READ *** @@ -374,6 +374,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -417,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2221,6 +2222,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 8f9858972..e187a4ba0 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index a60faac0d..f5fd8dda1 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 201 #define TEMP_SENSOR_1 201 @@ -2157,6 +2158,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index e64b904a8..c6e1e8f84 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + #define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 35 // User defined RED value + #define LED_USER_PRESET_GREEN 35 // User defined GREEN value + #define LED_USER_PRESET_BLUE 35 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 35 // User defined RED value - #define LED_USER_PRESET_GREEN 35 // User defined GREEN value - #define LED_USER_PRESET_BLUE 35 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss (optional) #define POWER_LOSS_STATE LOW // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2234,6 +2291,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2288,6 +2352,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 6dc8940ba..bb6c68036 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 201 #define TEMP_SENSOR_1 201 @@ -2168,6 +2169,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index e64b904a8..c6e1e8f84 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + #define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 35 // User defined RED value + #define LED_USER_PRESET_GREEN 35 // User defined GREEN value + #define LED_USER_PRESET_BLUE 35 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 35 // User defined RED value - #define LED_USER_PRESET_GREEN 35 // User defined GREEN value - #define LED_USER_PRESET_BLUE 35 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss (optional) #define POWER_LOSS_STATE LOW // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2234,6 +2291,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2288,6 +2352,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 393ec7b1f..96cc4c452 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2161,6 +2162,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index e1c7134d0..5c90165a1 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 39797c465..b08507c15 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2160,6 +2161,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index e1c7134d0..5c90165a1 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 746e02338..ef5de2be2 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2160,6 +2161,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index b00f6217f..14a8094d0 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 2bf4f81e1..6454511aa 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2149,6 +2150,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index e26cee71d..ca8134237 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 34cee53e2..23fc86697 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -364,6 +364,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -407,7 +408,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2163,6 +2164,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 06ff5067b..62fb01c21 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 0 @@ -2148,6 +2149,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 99552b8a4..9b38f3a0a 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index a4a887c77..47008a5af 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2152,6 +2153,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 941c89267..6305d2ac6 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 66866b36f..36bc0f974 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 0 @@ -2148,6 +2149,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index b00f6217f..14a8094d0 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index b4728dd71..1ba1c3c05 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 7 #define TEMP_SENSOR_1 0 @@ -2150,6 +2151,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index b00f6217f..14a8094d0 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index f766c39d3..0e60a8489 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -363,6 +363,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -406,7 +407,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2151,6 +2152,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 7038595fa..77bc7bfa2 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2151,6 +2152,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 2edf395d5..404101748 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -658,10 +659,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full // (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) @@ -852,11 +853,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -881,23 +906,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -932,6 +940,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1136,6 +1145,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1145,6 +1155,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2244,6 +2301,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2298,6 +2362,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 36c57a0aa..2f7791fcd 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -364,6 +364,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -407,7 +408,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2047,6 +2048,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index a6533618b..433f2bb6a 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index af94e2998..8d92ca60e 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -2036,6 +2037,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 814d507ba..a49fe6d74 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 3f31f05b0..9475b3bae 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -2028,6 +2029,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index dc4ba6943..cf59aa596 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -279,9 +279,10 @@ */ #define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 23 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + #define CONTROLLER_FAN_PIN 23 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -850,11 +851,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + //#define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -879,23 +904,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -930,6 +938,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1134,6 +1143,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1143,6 +1153,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2242,6 +2299,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2296,6 +2360,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h index e0fdb86b0..b37191722 100644 --- a/config/examples/wt150/Configuration.h +++ b/config/examples/wt150/Configuration.h @@ -359,6 +359,7 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 331 : (3.3V scaled thermistor 1 table) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -402,7 +403,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } + * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" } */ #define TEMP_SENSOR_0 -2 #define TEMP_SENSOR_1 0 @@ -2038,6 +2039,12 @@ // //#define MALYAN_LCD +// +// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays +// See Configuration_adv.h for all configuration options. +// +//#define LULZBOT_TOUCH_UI + // // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extensible_ui'. diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h index 870fac3b2..d94bcc0bc 100644 --- a/config/examples/wt150/Configuration_adv.h +++ b/config/examples/wt150/Configuration_adv.h @@ -279,9 +279,10 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed + //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled #endif // When first starting the main fan, run it at full speed for the @@ -657,10 +658,10 @@ #endif #endif -// @section extras +// @section motion -// minimum time in microseconds that a movement needs to take if the buffer is emptied. -#define DEFAULT_MINSEGMENTTIME 20000 +// Minimum time that a segment needs to take if the buffer is emptied +#define DEFAULT_MINSEGMENTTIME 20000 // (ms) // If defined the movements slow down when the look ahead buffer is only half full #define SLOWDOWN @@ -851,11 +852,35 @@ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #endif -// Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU -#if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages -#endif +#if HAS_LCD_MENU + + // Include a page of printer information in the LCD Main Menu + #define LCD_INFO_MENU + #if ENABLED(LCD_INFO_MENU) + //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages + #endif + + // BACK menu items keep the highlight at the top + //#define TURBO_BACK_MENU_ITEM + + /** + * LED Control Menu + * Add LED Control to the LCD menu + */ + //#define LED_CONTROL_MENU + #if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif + #endif + +#endif // HAS_LCD_MENU // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -880,23 +905,6 @@ #endif #endif -/** - * LED Control Menu - * Enable this feature to add LED Control to the LCD menu - */ -//#define LED_CONTROL_MENU -#if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif -#endif // LED_CONTROL_MENU - #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work @@ -931,6 +939,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) //#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1135,6 +1144,7 @@ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) + //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options //#define MARLIN_BRICKOUT @@ -1144,6 +1154,53 @@ #endif // HAS_GRAPHICAL_LCD +// +// Lulzbot Touch UI +// +#if ENABLED(LULZBOT_TOUCH_UI) + // Display board used + //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) + //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) + //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) + //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) + //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI + + // Correct the resolution if not using the stock TFT panel. + //#define TOUCH_UI_320x240 + //#define TOUCH_UI_480x272 + //#define TOUCH_UI_800x480 + + // Mappings for boards with a standard RepRapDiscount Display connector + //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping + //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping + //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping + //#define OTHER_PIN_LAYOUT // Define pins manually below + #if ENABLED(OTHER_PIN_LAYOUT) + // The pins for CS and MOD_RESET (PD) must be chosen. + #define CLCD_MOD_RESET 9 + #define CLCD_SPI_CS 10 + + // If using software SPI, specify pins for SCLK, MOSI, MISO + //#define CLCD_USE_SOFT_SPI + #if ENABLED(CLCD_USE_SOFT_SPI) + #define CLCD_SOFT_SPI_MOSI 11 + #define CLCD_SOFT_SPI_MISO 12 + #define CLCD_SOFT_SPI_SCLK 13 + #endif + #endif + + // Display Orientation. An inverted (i.e. upside-down) display + // is supported on the FT800. The FT810 and beyond also support + // portrait and mirrored orientations. + //#define TOUCH_UI_INVERTED + //#define TOUCH_UI_PORTRAIT + //#define TOUCH_UI_MIRRORED + + // Use a numeric passcode for "Screen lock" keypad. + // (recommended for smaller displays) + //#define TOUCH_UI_PASSCODE +#endif + // @section safety /** @@ -2243,6 +2300,13 @@ */ #define EXTENDED_CAPABILITIES_REPORT +/** + * Expected Printer Check + * Add the M16 G-code to compare a string to the MACHINE_NAME. + * M16 with a non-matching string causes the printer to halt. + */ +//#define EXPECTED_PRINTER_CHECK + /** * Disable all Volumetric extrusion options */ @@ -2297,6 +2361,13 @@ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode #endif +/** + * Startup commands + * + * Execute certain G-code commands immediately after power-on. + */ +//#define STARTUP_COMMANDS "M17 Z" + /** * G-code Macros * diff --git a/platformio.ini b/platformio.ini index d62388726..f3da5f9f6 100644 --- a/platformio.ini +++ b/platformio.ini @@ -32,7 +32,6 @@ lib_deps = Adafruit NeoPixel@1.1.3 LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip SailfishRGB_LED=https://github.com/mikeshub/SailfishRGB_LED/archive/master.zip SlowSoftI2CMaster=https://github.com/mikeshub/SlowSoftI2CMaster/archive/master.zip @@ -57,6 +56,7 @@ board = megaatmega2560 build_flags = ${common.build_flags} board_build.f_cpu = 16000000L lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -70,6 +70,7 @@ board = megaatmega1280 build_flags = ${common.build_flags} board_build.f_cpu = 16000000L lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -86,6 +87,7 @@ framework = arduino board = at90usb1286 build_flags = ${common.build_flags} lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + extra_scripts = pre:buildroot/share/atom/create_custom_upload_command_CDC.py monitor_speed = 250000 @@ -102,6 +104,7 @@ framework = arduino board = at90usb1286 build_flags = ${common.build_flags} lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + extra_scripts = pre:buildroot/share/atom/create_custom_upload_command_DFU.py monitor_speed = 250000 @@ -118,7 +121,6 @@ framework = arduino board = due build_flags = ${common.build_flags} lib_deps = ${common.lib_deps} -lib_ignore = TMC26XStepper src_filter = ${common.default_src_filter} + monitor_speed = 250000 [env:DUE_USB] @@ -127,7 +129,6 @@ framework = arduino board = dueUSB build_flags = ${common.build_flags} lib_deps = ${common.lib_deps} -lib_ignore = TMC26XStepper src_filter = ${common.default_src_filter} + monitor_speed = 250000 [env:DUE_debug] @@ -139,7 +140,6 @@ build_flags = ${common.build_flags} -funwind-tables -mpoke-function-name lib_deps = ${common.lib_deps} -lib_ignore = TMC26XStepper src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -195,7 +195,7 @@ board = sanguino_atmega1284p build_flags = ${common.build_flags} -fmerge-all-constants upload_speed = 57600 lib_deps = ${common.lib_deps} -lib_ignore = TMCStepper, TMC26XStepper +lib_ignore = TMCStepper src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -209,7 +209,7 @@ board = sanguino_atmega1284p build_flags = ${common.build_flags} upload_speed = 115200 lib_deps = ${common.lib_deps} -lib_ignore = TMCStepper, TMC26XStepper +lib_ignore = TMCStepper src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -223,6 +223,7 @@ board = reprap_rambo build_flags = ${common.build_flags} board_build.f_cpu = 16000000L lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -235,6 +236,7 @@ framework = arduino board = sanguino_atmega644p build_flags = ${common.build_flags} lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -247,6 +249,7 @@ framework = arduino board = sanguino_atmega1284p build_flags = ${common.build_flags} lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -262,14 +265,7 @@ build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py -DDEBUG_LEVEL=0 build_unflags = -std=gnu++11 lib_deps = ${common.lib_deps} -lib_ignore = U8glib-HAL - TMC26XStepper - libf3c - lib066 - Adafruit NeoPixel_ID28 - Adafruit NeoPixel - libf3e -#lib_ldf_mode = chain +lib_ignore = U8glib-HAL, Adafruit NeoPixel, SPI src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -277,52 +273,44 @@ monitor_speed = 250000 # fysetc_STM32F1 # [env:fysetc_STM32F1] -platform = ststm32 -framework = arduino -board = genericSTM32F103RC -extra_scripts = buildroot/share/PlatformIO/scripts/fysetc_STM32F1.py -build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py +platform = ststm32 +framework = arduino +board = genericSTM32F103RC +#board_build.core = maple +platform_packages = tool-stm32duino +extra_scripts = buildroot/share/PlatformIO/scripts/fysetc_STM32F1.py +build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py ${common.build_flags} -std=gnu++14 -DDEBUG_LEVEL=0 -DHAVE_SW_SERIAL -build_unflags = -std=gnu++11 -lib_deps = ${common.lib_deps} +build_unflags = -std=gnu++11 +lib_deps = ${common.lib_deps} SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip -lib_ignore = TMC26XStepper - libf3c - lib066 - Adafruit NeoPixel_ID28 - Adafruit NeoPixel - libf3e -lib_ldf_mode = chain -src_filter = ${common.default_src_filter} + -monitor_speed = 250000 -debug_tool = stlink -upload_protocol = serial +lib_ignore = Adafruit NeoPixel, SPI +lib_ldf_mode = chain +src_filter = ${common.default_src_filter} + +monitor_speed = 250000 +debug_tool = stlink +upload_protocol = serial # # BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3) # [env:BIGTREE_SKR_MINI] -platform = ststm32 -framework = arduino -board = genericSTM32F103RC -extra_scripts = buildroot/share/PlatformIO/scripts/STM32F1_SKR_MINI.py -build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py +platform = ststm32 +framework = arduino +board = genericSTM32F103RC +platform_packages = tool-stm32duino +extra_scripts = buildroot/share/PlatformIO/scripts/STM32F1_SKR_MINI.py +build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py ${common.build_flags} -std=gnu++14 -DDEBUG_LEVEL=0 -build_unflags = -std=gnu++11 -lib_deps = ${common.lib_deps} -lib_ignore = TMC26XStepper - libf3c - lib066 - Adafruit NeoPixel_ID28 - Adafruit NeoPixel - libf3e -#lib_ldf_mode = chain -src_filter = ${common.default_src_filter} + -monitor_speed = 115200 -upload_protocol = stlink -debug_tool = stlink +build_unflags = -std=gnu++11 +lib_deps = ${common.lib_deps} +lib_ignore = Adafruit NeoPixel, SPI +src_filter = ${common.default_src_filter} + +monitor_speed = 115200 +upload_protocol = stlink +debug_tool = stlink # # STM32F4 with STM32GENERIC @@ -331,10 +319,10 @@ debug_tool = stlink platform = ststm32 framework = arduino board = disco_f407vg -build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB +build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F4 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB lib_deps = ${common.lib_deps} -lib_ignore = Adafruit NeoPixel, TMC26XStepper, TMCStepper -src_filter = ${common.default_src_filter} + - + +lib_ignore = Adafruit NeoPixel, TMCStepper +src_filter = ${common.default_src_filter} + - monitor_speed = 250000 # @@ -343,11 +331,11 @@ monitor_speed = 250000 [env:STM32F7] platform = ststm32 framework = arduino -board = disco_f765vg -build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB +board = remram_v1 +build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F7 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB lib_deps = ${common.lib_deps} -lib_ignore = Adafruit NeoPixel, TMC26XStepper, TMCStepper -src_filter = ${common.default_src_filter} + - + +lib_ignore = Adafruit NeoPixel, TMCStepper +src_filter = ${common.default_src_filter} + - monitor_speed = 250000 # @@ -359,12 +347,12 @@ framework = arduino board = armed_v1 build_flags = ${common.build_flags} -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11 lib_deps = ${common.lib_deps} -lib_ignore = Adafruit NeoPixel, TMC26XStepper +lib_ignore = Adafruit NeoPixel src_filter = ${common.default_src_filter} + monitor_speed = 250000 # -# Alfawise U20 (STM32F103VET6) +# Longer 3D board in Alfawise U20 (STM32F103VET6) # [env:alfawise_U20] platform = ststm32 @@ -378,12 +366,7 @@ build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py build_unflags = -std=gnu++11 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 src_filter = ${common.default_src_filter} + lib_deps = ${common.lib_deps} -lib_ignore = TMC26XStepper - libf3c - lib066 - Adafruit NeoPixel_ID28 - Adafruit NeoPixel - libf3e +lib_ignore = Adafruit NeoPixel, SPI # # MKS Robin (STM32F103ZET6) @@ -398,13 +381,7 @@ build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py build_unflags = -std=gnu++11 src_filter = ${common.default_src_filter} + lib_deps = ${common.lib_deps} -lib_ignore = TMC26XStepper - libf3c - lib066 - Adafruit NeoPixel_ID28 - Adafruit NeoPixel - libf3e - U8glib-HAL +lib_ignore = Adafruit NeoPixel, SPI # # MKS ROBIN LITE/LITE2 (STM32F103RCT6) @@ -419,12 +396,7 @@ build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py build_unflags = -std=gnu++11 src_filter = ${common.default_src_filter} + lib_deps = ${common.lib_deps} -lib_ignore = TMC26XStepper - libf3c - lib066 - Adafruit NeoPixel_ID28 - Adafruit NeoPixel - libf3e +lib_ignore = Adafruit NeoPixel, SPI # # MKS Robin Mini (STM32F103VET6) @@ -439,12 +411,7 @@ build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py build_unflags = -std=gnu++11 src_filter = ${common.default_src_filter} + lib_deps = ${common.lib_deps} -lib_ignore = TMC26XStepper - libf3c - lib066 - Adafruit NeoPixel_ID28 - Adafruit NeoPixel - libf3e +lib_ignore = Adafruit NeoPixel, SPI # # MKS Robin Nano (STM32F103VET6) @@ -459,12 +426,7 @@ build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py build_unflags = -std=gnu++11 src_filter = ${common.default_src_filter} + lib_deps = ${common.lib_deps} -lib_ignore = TMC26XStepper - libf3c - lib066 - Adafruit NeoPixel_ID28 - Adafruit NeoPixel - libf3e +lib_ignore = Adafruit NeoPixel, SPI # # JGAurora A5S A1 (STM32F103ZET6) @@ -479,12 +441,7 @@ build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py build_unflags = -std=gnu++11 src_filter = ${common.default_src_filter} + lib_deps = ${common.lib_deps} -lib_ignore = TMC26XStepper - libf3c - lib066 - Adafruit NeoPixel_ID28 - Adafruit NeoPixel - libf3e +lib_ignore = Adafruit NeoPixel, SPI monitor_speed = 250000 # @@ -498,14 +455,14 @@ framework = arduino board = blackSTM32F407VET6 extra_scripts = pre:buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py build_flags = ${common.build_flags} - -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\" + -DSTM32F4 -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\" lib_deps = ${common.lib_deps} -lib_ignore = Adafruit NeoPixel, TMC26XStepper, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster +lib_ignore = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster src_filter = ${common.default_src_filter} + monitor_speed = 250000 # -# BIGTREE_SKR_PRO (STM32F407ZGT6 ARM Cortex-M4) +# Bigtreetech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) # [env:BIGTREE_SKR_PRO] platform = ststm32@5.4.3 @@ -516,7 +473,27 @@ build_flags = ${common.build_flags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407ZG\" -DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 -DHAVE_HWSERIAL6 lib_deps = ${common.lib_deps} -lib_ignore = Adafruit NeoPixel, TMC26XStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster +lib_ignore = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster +src_filter = ${common.default_src_filter} + +monitor_speed = 250000 + +# +# BIGTREE_SKR_BTT002 (STM32F407VET6 ARM Cortex-M4) +# +[env:BIGTREE_BTT002] +platform = ststm32@5.4.3 +framework = arduino +board = BigTree_Btt002 +extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +build_flags = ${common.build_flags} + -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407VE\" + -DTARGET_STM32F4 -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000 + -DHAVE_HWSERIAL2 + -DHAVE_HWSERIAL3 + -DPIN_SERIAL2_RX=PD_6 + -DPIN_SERIAL2_TX=PD_5 +lib_deps = ${common.lib_deps} +lib_ignore = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -529,6 +506,7 @@ framework = arduino board = teensy31 build_flags = ${common.build_flags} lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip lib_ignore = Adafruit NeoPixel src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -542,6 +520,7 @@ framework = arduino board = teensy35 build_flags = ${common.build_flags} lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip lib_ignore = Adafruit NeoPixel src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -557,16 +536,7 @@ build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py -DMCU_ST -DDEBUG_LEVEL=0 src_filter = ${common.default_src_filter} + #- -lib_ignore = Adafruit NeoPixel - U8glib - LiquidCrystal_I2C - LiquidCrystal - NewliquidCrystal - LiquidTWI2 - TMC26XStepper - TMCStepper - Servo(STM32F1) - U8glib-HAL +lib_ignore = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, U8glib-HAL, SPI # # Espressif ESP32 @@ -581,13 +551,7 @@ upload_port = /dev/ttyUSB0 lib_deps = AsyncTCP=https://github.com/me-no-dev/AsyncTCP/archive/master.zip ESPAsyncWebServer=https://github.com/me-no-dev/ESPAsyncWebServer/archive/master.zip -lib_ignore = TMC26XStepper - LiquidCrystal_I2C - LiquidCrystal - NewliquidCrystal - LiquidTWI2 - SailfishLCD - SailfishRGB_LED +lib_ignore = LiquidCrystal, LiquidTWI2, SailfishLCD, SailfishRGB_LED src_filter = ${common.default_src_filter} + # @@ -600,6 +564,7 @@ board = fysetc_f6_13 build_flags = ${common.build_flags} board_build.f_cpu = 16000000L lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + monitor_speed = 250000 @@ -627,6 +592,6 @@ framework = arduino build_flags = ${common.build_flags} -std=gnu++17 build_unflags = -std=gnu++11 lib_deps = ${common.lib_deps} -lib_ignore = U8glib-HAL, TMC26XStepper +lib_ignore = U8glib-HAL src_filter = ${common.default_src_filter} + debug_tool = jlink