diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 2cbd2baae..dca5544de 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -225,6 +225,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 15f12bbc0..4ef5d59f1 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -2562,13 +2562,13 @@ inline void gcode_M17() {
    */
   inline void gcode_M28() {
     char* codepos = strchr_pointer + 4;
-    char* starpos = strchr(strchr_pointer + 4, '*');
+    char* starpos = strchr(codepos, '*');
     if (starpos) {
       char* npos = strchr(cmdbuffer[bufindr], 'N');
       strchr_pointer = strchr(npos, ' ') + 1;
       *(starpos) = '\0';
     }
-    card.openFile(strchr_pointer + 4, false);
+    card.openFile(codepos, false);
   }
 
   /**
diff --git a/Marlin/SdBaseFile.h b/Marlin/SdBaseFile.h
index b0e77ecb4..dea299a64 100644
--- a/Marlin/SdBaseFile.h
+++ b/Marlin/SdBaseFile.h
@@ -171,9 +171,9 @@ static inline uint8_t FAT_SECOND(uint16_t fatTime) {
   return 2*(fatTime & 0X1F);
 }
 /** Default date for file timestamps is 1 Jan 2000 */
-uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | BIT(5) | 1;
+uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | (1 << 5) | 1;
 /** Default time for file timestamp is 1 am */
-uint16_t const FAT_DEFAULT_TIME = BIT(11);
+uint16_t const FAT_DEFAULT_TIME = (1 << 11);
 //------------------------------------------------------------------------------
 /**
  * \class SdBaseFile
diff --git a/Marlin/cardreader.cpp b/Marlin/cardreader.cpp
index a51d77bf0..125caab01 100644
--- a/Marlin/cardreader.cpp
+++ b/Marlin/cardreader.cpp
@@ -504,7 +504,6 @@ void CardReader::printingHasFinished() {
     startFileprint();
   }
   else {
-    quickStop();
     file.close();
     sdprinting = false;
     if (SD_FINISHED_STEPPERRELEASE) {
diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h
index 89bfe5c18..57ec74f9b 100644
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@@ -234,6 +234,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
diff --git a/Marlin/dogm_lcd_implementation.h b/Marlin/dogm_lcd_implementation.h
index 0088106b2..4abf67aa0 100644
--- a/Marlin/dogm_lcd_implementation.h
+++ b/Marlin/dogm_lcd_implementation.h
@@ -74,12 +74,9 @@
   #endif
 #endif // SIMULATE_ROMFONT
 
-#define FONT_STATUSMENU_NAME FONT_MENU_NAME
-
-#define FONT_STATUSMENU 1
+#define FONT_MENU 1
 #define FONT_SPECIAL 2
 #define FONT_MENU_EDIT 3
-#define FONT_MENU 4
 
 // DOGM parameters (size in pixels)
 #define DOG_CHAR_WIDTH         6
@@ -137,7 +134,6 @@ char currentfont = 0;
 
 static void lcd_setFont(char font_nr) {
   switch(font_nr) {
-    case FONT_STATUSMENU : {u8g.setFont(FONT_STATUSMENU_NAME); currentfont = FONT_STATUSMENU;}; break;
     case FONT_MENU       : {u8g.setFont(FONT_MENU_NAME); currentfont = FONT_MENU;}; break;
     case FONT_SPECIAL    : {u8g.setFont(FONT_SPECIAL_NAME); currentfont = FONT_SPECIAL;}; break;
     case FONT_MENU_EDIT  : {u8g.setFont(FONT_MENU_EDIT_NAME); currentfont = FONT_MENU_EDIT;}; break;
@@ -218,7 +214,7 @@ static void lcd_implementation_init()
       u8g.drawStr(txt1X, u8g.getHeight() - DOG_CHAR_HEIGHT*3/2, STRING_SPLASH_LINE1);
       u8g.drawStr(txt2X, u8g.getHeight() - DOG_CHAR_HEIGHT*1/2, STRING_SPLASH_LINE2);
     #endif
-	} while(u8g.nextPage());
+	} while (u8g.nextPage());
 }
 
 static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
@@ -227,7 +223,7 @@ static void _draw_heater_status(int x, int heater) {
   bool isBed = heater < 0;
   int y = 17 + (isBed ? 1 : 0);
 
-  lcd_setFont(FONT_STATUSMENU);
+  lcd_setFont(FONT_MENU);
   u8g.setPrintPos(x,7);
   lcd_print(itostr3(int((heater >= 0 ? degTargetHotend(heater) : degTargetBed()) + 0.5)));
   lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
@@ -252,7 +248,8 @@ static void lcd_implementation_status_screen() {
 
   // Symbols menu graphics, animated fan
   u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT, (blink % 2) && fanSpeed ? status_screen0_bmp : status_screen1_bmp);
- 
+  lcd_setFont(FONT_MENU);
+
   #ifdef SDSUPPORT
     // SD Card Symbol
     u8g.drawBox(42,42,8,7);
@@ -264,14 +261,12 @@ static void lcd_implementation_status_screen() {
     u8g.drawFrame(54,49,73,4);
 
     // SD Card Progress bar and clock
-    lcd_setFont(FONT_STATUSMENU);
- 
     if (IS_SD_PRINTING) {
       // Progress bar solid part
       u8g.drawBox(55, 50, (unsigned int)(71.f * card.percentDone() / 100.f), 2);
     }
 
-    u8g.setPrintPos(80,47);
+    u8g.setPrintPos(80,48);
     if (starttime != 0) {
       uint16_t time = (millis() - starttime) / 60000;
       lcd_print(itostr2(time/60));
@@ -290,11 +285,11 @@ static void lcd_implementation_status_screen() {
   if (EXTRUDERS < 4) _draw_heater_status(81, -1);
  
   // Fan
-  lcd_setFont(FONT_STATUSMENU);
   u8g.setPrintPos(104,27);
   #if defined(FAN_PIN) && FAN_PIN > -1
     int per = ((fanSpeed + 1) * 100) / 256;
     if (per) {
+
       lcd_print(itostr3(per));
       lcd_print('%');
     }
@@ -305,50 +300,38 @@ static void lcd_implementation_status_screen() {
     }
 
   // X, Y, Z-Coordinates
-  lcd_setFont(FONT_STATUSMENU);
-  u8g.drawBox(0,29,128,10);
+  #define XYZ_BASELINE 38
+  u8g.drawBox(0,30,128,9);
   u8g.setColorIndex(0); // white on black
-  u8g.setPrintPos(2,37);
+  u8g.setPrintPos(2,XYZ_BASELINE);
   lcd_print('X');
-  u8g.drawPixel(8,33);
-  u8g.drawPixel(8,35);
-  u8g.setPrintPos(10,37);
+  u8g.drawPixel(8,XYZ_BASELINE - 5);
+  u8g.drawPixel(8,XYZ_BASELINE - 3);
+  u8g.setPrintPos(10,XYZ_BASELINE);
   lcd_print(ftostr31ns(current_position[X_AXIS]));
-  u8g.setPrintPos(43,37);
+  u8g.setPrintPos(43,XYZ_BASELINE);
   lcd_print('Y');
-  u8g.drawPixel(49,33);
-  u8g.drawPixel(49,35);
-  u8g.setPrintPos(51,37);
+  u8g.drawPixel(49,XYZ_BASELINE - 5);
+  u8g.drawPixel(49,XYZ_BASELINE - 3);
+  u8g.setPrintPos(51,XYZ_BASELINE);
   lcd_print(ftostr31ns(current_position[Y_AXIS]));
-  u8g.setPrintPos(83,37);
+  u8g.setPrintPos(83,XYZ_BASELINE);
   lcd_print('Z');
-  u8g.drawPixel(89,33);
-  u8g.drawPixel(89,35);
-  u8g.setPrintPos(91,37);
+  u8g.drawPixel(89,XYZ_BASELINE - 5);
+  u8g.drawPixel(89,XYZ_BASELINE - 3);
+  u8g.setPrintPos(91,XYZ_BASELINE);
   lcd_print(ftostr31(current_position[Z_AXIS]));
   u8g.setColorIndex(1); // black on white
  
   // Feedrate
-  lcd_setFont(FONT_MENU);
   u8g.setPrintPos(3,49);
   lcd_print(LCD_STR_FEEDRATE[0]);
-  lcd_setFont(FONT_STATUSMENU);
-  u8g.setPrintPos(12,48);
+  u8g.setPrintPos(12,49);
   lcd_print(itostr3(feedmultiply));
   lcd_print('%');
 
   // Status line
-/* The new fonts are small enough
-  #ifndef MAPPER_C2C3
-    lcd_setFont(FONT_MENU);
-  #else
-    lcd_setFont(FONT_STATUSMENU);
-  #endif
-*/
-  lcd_setFont(FONT_MENU);
-
-  u8g.setPrintPos(0,61);
-
+  u8g.setPrintPos(0,63);
   #ifndef FILAMENT_LCD_DISPLAY
     lcd_print(lcd_status_message);
   #else
@@ -365,10 +348,10 @@ static void lcd_implementation_status_screen() {
   #endif
 }
 
-static void lcd_implementation_mark_as_selected(uint8_t row, char pr_char) {
-  if ((pr_char == '>') || (pr_char == LCD_STR_UPLEVEL[0] )) {
+static void lcd_implementation_mark_as_selected(uint8_t row, bool isSelected) {
+  if (isSelected) {
     u8g.setColorIndex(1);  // black on white
-    u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
+    u8g.drawBox(0, row * DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
     u8g.setColorIndex(0);  // following text must be white on black
   }
   else {
@@ -377,96 +360,78 @@ static void lcd_implementation_mark_as_selected(uint8_t row, char pr_char) {
   u8g.setPrintPos(START_ROW * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
 }
 
-static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) {
+static void lcd_implementation_drawmenu_generic(bool isSelected, uint8_t row, const char* pstr, char pre_char, char post_char) {
   char c;
   uint8_t n = LCD_WIDTH - 2;
 
-  lcd_implementation_mark_as_selected(row, pre_char);
+  lcd_implementation_mark_as_selected(row, isSelected);
 
-  while((c = pgm_read_byte(pstr))) {
+  while (c = pgm_read_byte(pstr)) {
     n -= lcd_print(c);
     pstr++;
   }
-  while(n--) lcd_print(' ');
+  while (n--) lcd_print(' ');
   lcd_print(post_char);
   lcd_print(' ');
 }
 
-static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) {
+static void _drawmenu_setting_edit_generic(bool isSelected, uint8_t row, const char* pstr, const char* data, bool pgm) {
   char c;
   uint8_t n = LCD_WIDTH - 2 - (pgm ? lcd_strlen_P(data) : (lcd_strlen((char*)data)));
 
-  lcd_implementation_mark_as_selected(row, pre_char);
+  lcd_implementation_mark_as_selected(row, isSelected);
 
-  while( (c = pgm_read_byte(pstr))) {
+  while (c = pgm_read_byte(pstr)) {
     n -= lcd_print(c);
     pstr++;
   }
   lcd_print(':');
-  while(n--) lcd_print(' ');
+  while (n--) lcd_print(' ');
   if (pgm) { lcd_printPGM(data); } else { lcd_print((char *)data); }
 }
 
-#define lcd_implementation_drawmenu_setting_edit_generic(row, pstr, pre_char, data) _drawmenu_setting_edit_generic(row, pstr, pre_char, data, false)
-#define lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, pre_char, data) _drawmenu_setting_edit_generic(row, pstr, pre_char, data, true)
-
-#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float43_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float43(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
-#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
+#define lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, false)
+#define lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, true)
+
+#define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
 
 //Add version for callback functions
-#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float43_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float43(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
-#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
+#define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, itostr3(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr3(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr32(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr43(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr52(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr51(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, ftostr5(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
 
 void lcd_implementation_drawedit(const char* pstr, char* value) {
   uint8_t rows = 1;
-  uint8_t lcd_width = LCD_WIDTH;
-  uint8_t char_width = DOG_CHAR_WIDTH;
+  uint8_t lcd_width = LCD_WIDTH, char_width = DOG_CHAR_WIDTH;
+  uint8_t vallen = lcd_strlen(value);
 
   #ifdef USE_BIG_EDIT_FONT
     if (lcd_strlen_P(pstr) <= LCD_WIDTH_EDIT - 1) {
       lcd_setFont(FONT_MENU_EDIT);
       lcd_width = LCD_WIDTH_EDIT + 1;
       char_width = DOG_CHAR_WIDTH_EDIT;
-      if (lcd_strlen_P(pstr) >= LCD_WIDTH_EDIT - lcd_strlen(value)) rows = 2;
+      if (lcd_strlen_P(pstr) >= LCD_WIDTH_EDIT - vallen) rows = 2;
     }
     else {
       lcd_setFont(FONT_MENU);
     }
   #endif
 
-  if (lcd_strlen_P(pstr) > LCD_WIDTH - 2 - lcd_strlen(value)) rows = 2;
+  if (lcd_strlen_P(pstr) > LCD_WIDTH - 2 - vallen) rows = 2;
 
   const float kHalfChar = DOG_CHAR_HEIGHT_EDIT / 2;
   float rowHeight = u8g.getHeight() / (rows + 1); // 1/(rows+1) = 1/2 or 1/3
@@ -474,42 +439,36 @@ void lcd_implementation_drawedit(const char* pstr, char* value) {
   u8g.setPrintPos(0, rowHeight + kHalfChar);
   lcd_printPGM(pstr);
   lcd_print(':');
-  u8g.setPrintPos((lcd_width-1-lcd_strlen(value)) * char_width, rows * rowHeight + kHalfChar);
+  u8g.setPrintPos((lcd_width - 1 - vallen) * char_width, rows * rowHeight + kHalfChar);
   lcd_print(value);
 }
 
-static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, char * const longFilename, bool isDir, bool isSelected) {
+static void _drawmenu_sd(bool isSelected, uint8_t row, const char* pstr, const char* filename, char * const longFilename, bool isDir) {
   char c;
   uint8_t n = LCD_WIDTH - 1;
 
-  if (longFilename[0] != '\0') {
+  if (longFilename[0]) {
     filename = longFilename;
     longFilename[n] = '\0';
   }
 
-  lcd_implementation_mark_as_selected(row, ((isSelected) ? '>' : ' '));
+  lcd_implementation_mark_as_selected(row, isSelected);
 
   if (isDir) lcd_print(LCD_STR_FOLDER[0]);
-  while((c = *filename) != '\0') {
+  while (c = *filename) {
     n -= lcd_print(c);
     filename++;
   }
-  while(n--) lcd_print(' ');
+  while (n--) lcd_print(' ');
 }
 
-#define lcd_implementation_drawmenu_sdfile_selected(row, pstr, filename, longFilename) _drawmenu_sd(row, pstr, filename, longFilename, false, true)
-#define lcd_implementation_drawmenu_sdfile(row, pstr, filename, longFilename) _drawmenu_sd(row, pstr, filename, longFilename, false, false)
-#define lcd_implementation_drawmenu_sddirectory_selected(row, pstr, filename, longFilename) _drawmenu_sd(row, pstr, filename, longFilename, true, true)
-#define lcd_implementation_drawmenu_sddirectory(row, pstr, filename, longFilename) _drawmenu_sd(row, pstr, filename, longFilename, true, false)
-
-#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
-#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
-#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
-#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
-#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
-#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
-#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
-#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
+#define lcd_implementation_drawmenu_sdfile(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, false)
+#define lcd_implementation_drawmenu_sddirectory(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, true)
+
+#define lcd_implementation_drawmenu_back(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
+#define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
+#define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
+#define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
 
 static void lcd_implementation_quick_feedback() {
   #if BEEPER > -1
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 12a82f589..17da67953 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -215,6 +215,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 // Felix Foil Heater
    #define DEFAULT_bedKp 103.37
diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h
index 9b1f10263..9766961a5 100644
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@@ -215,6 +215,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 // Felix Foil Heater
    #define DEFAULT_bedKp 103.37
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 3ec047bb7..324554612 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -231,6 +231,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 1bd2d6325..b1c63eb4f 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -230,6 +230,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index f59283266..6c12c2f19 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -254,6 +254,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index afe8ad85a..8d348ba9b 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -230,6 +230,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 49b5e2175..2aee422e3 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -258,6 +258,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index cd22676f7..b15f2b9c0 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -259,6 +259,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 187f71b09..cb61ca10f 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -228,6 +228,8 @@ Here are some standard links for getting your machine calibrated:
 // to increase the heat up rate. However, if changed, user must be aware of the safety concerns
 // of drawing too much current from the power supply.
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 3b3f2e58b..bf4e27960 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -230,6 +230,8 @@ Here are some standard links for getting your machine calibrated:
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
+//#define PID_BED_DEBUG // Sends debug data to the serial port.
+
 #ifdef PIDTEMPBED
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp
index e9c58e9f4..1c79ea3b4 100644
--- a/Marlin/stepper.cpp
+++ b/Marlin/stepper.cpp
@@ -46,6 +46,7 @@ block_t *current_block;  // A pointer to the block currently being traced
 
 // Variables used by The Stepper Driver Interrupt
 static unsigned char out_bits;        // The next stepping-bits to be output
+static unsigned int cleaning_buffer_counter;  
 
 // Counter variables for the bresenham line tracer
 static long counter_x, counter_y, counter_z, counter_e;
@@ -346,6 +347,17 @@ FORCE_INLINE void trapezoid_generator_reset() {
 // "The Stepper Driver Interrupt" - This timer interrupt is the workhorse.
 // It pops blocks from the block_buffer and executes them by pulsing the stepper pins appropriately.
 ISR(TIMER1_COMPA_vect) {
+
+  if(cleaning_buffer_counter)
+  {
+    current_block = NULL;
+    plan_discard_current_block();
+    if ((cleaning_buffer_counter == 1) && (SD_FINISHED_STEPPERRELEASE)) enquecommands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
+    cleaning_buffer_counter--;
+    OCR1A = 200;
+    return;
+  }
+  
   // If there is no current block, attempt to pop one from the buffer
   if (!current_block) {
     // Anything in the buffer?
@@ -972,6 +984,7 @@ void finishAndDisableSteppers() {
 }
 
 void quickStop() {
+  cleaning_buffer_counter = 5000;
   DISABLE_STEPPER_DRIVER_INTERRUPT();
   while (blocks_queued()) plan_discard_current_block();
   current_block = NULL;
diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp
index ed5593057..506474206 100644
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@@ -636,6 +636,21 @@ float get_pid_output(int e) {
       pid_output = constrain(target_temperature_bed, 0, MAX_BED_POWER);
     #endif // PID_OPENLOOP
 
+    #ifdef PID_BED_DEBUG
+      SERIAL_ECHO_START;
+      SERIAL_ECHO(" PID_BED_DEBUG ");
+      SERIAL_ECHO(": Input ");
+      SERIAL_ECHO(current_temperature_bed);
+      SERIAL_ECHO(" Output ");
+      SERIAL_ECHO(pid_output);
+      SERIAL_ECHO(" pTerm ");
+      SERIAL_ECHO(pTerm_bed);
+      SERIAL_ECHO(" iTerm ");
+      SERIAL_ECHO(iTerm_bed);
+      SERIAL_ECHO(" dTerm ");
+      SERIAL_ECHOLN(dTerm_bed);
+    #endif //PID_BED_DEBUG
+
     return pid_output;
   }
 #endif
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 720896b82..c61c03f64 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -118,64 +118,84 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
 
 
 /* Helper macros for menus */
+
+/**
+ * START_MENU generates the init code for a menu function
+ */
 #define START_MENU() do { \
-	encoderRateMultiplierEnabled = false; \
-    if (encoderPosition > 0x8000) encoderPosition = 0; \
-    if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM < currentMenuViewOffset) currentMenuViewOffset = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM;\
-    uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \
-    bool wasClicked = LCD_CLICKED;\
-    for(uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \
-        _menuItemNr = 0;
+  encoderRateMultiplierEnabled = false; \
+  if (encoderPosition > 0x8000) encoderPosition = 0; \
+  uint8_t encoderLine = encoderPosition / ENCODER_STEPS_PER_MENU_ITEM; \
+  if (encoderLine < currentMenuViewOffset) currentMenuViewOffset = encoderLine; \
+  uint8_t _lineNr = currentMenuViewOffset, _menuItemNr; \
+  bool wasClicked = LCD_CLICKED, itemSelected; \
+  if (wasClicked) lcd_quick_feedback(); \
+  for (uint8_t _drawLineNr = 0; _drawLineNr < LCD_HEIGHT; _drawLineNr++, _lineNr++) { \
+    _menuItemNr = 0;
+
+/**
+ * MENU_ITEM generates draw & handler code for a menu item, potentially calling:
+ *
+ *   lcd_implementation_drawmenu_[type](sel, row, label, arg3...)
+ *   menu_action_[type](arg3...)
+ *
+ * Examples:
+ *   MENU_ITEM(back, MSG_WATCH, lcd_status_screen)
+ *     lcd_implementation_drawmenu_back(sel, row, PSTR(MSG_WATCH), lcd_status_screen)
+ *     menu_action_back(lcd_status_screen)
+ *
+ *   MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause)
+ *     lcd_implementation_drawmenu_function(sel, row, PSTR(MSG_PAUSE_PRINT), lcd_sdcard_pause)
+ *     menu_action_function(lcd_sdcard_pause)
+ *
+ *   MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999)
+ *   MENU_ITEM(setting_edit_int3, MSG_SPEED, PSTR(MSG_SPEED), &feedmultiply, 10, 999)
+ *     lcd_implementation_drawmenu_setting_edit_int3(sel, row, PSTR(MSG_SPEED), PSTR(MSG_SPEED), &feedmultiply, 10, 999)
+ *     menu_action_setting_edit_int3(PSTR(MSG_SPEED), &feedmultiply, 10, 999)
+ *
+ */
 #define MENU_ITEM(type, label, args...) do { \
-    if (_menuItemNr == _lineNr) { \
-        if (lcdDrawUpdate) { \
-            const char* _label_pstr = PSTR(label); \
-            if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
-                lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \
-            }else{\
-                lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \
-            }\
-        }\
-        if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) {\
-            lcd_quick_feedback(); \
-            menu_action_ ## type ( args ); \
-            return;\
-        }\
-    }\
-    _menuItemNr++;\
+  if (_menuItemNr == _lineNr) { \
+    itemSelected = encoderLine == _menuItemNr; \
+    if (lcdDrawUpdate) \
+      lcd_implementation_drawmenu_ ## type(itemSelected, _drawLineNr, PSTR(label), ## args); \
+    if (wasClicked && itemSelected) { \
+      menu_action_ ## type(args); \
+      return; \
+    } \
+  } \
+  _menuItemNr++; \
 } while(0)
+
 #ifdef ENCODER_RATE_MULTIPLIER
+  /**
+   * MENU_MULTIPLIER_ITEM generates drawing and handling code for a multiplier menu item
+   */
   #define MENU_MULTIPLIER_ITEM(type, label, args...) do { \
     if (_menuItemNr == _lineNr) { \
-      if (lcdDrawUpdate) { \
-        const char* _label_pstr = PSTR(label); \
-        if ((encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
-          lcd_implementation_drawmenu_ ## type ## _selected (_drawLineNr, _label_pstr , ## args ); \
-        } \
-        else { \
-          lcd_implementation_drawmenu_ ## type (_drawLineNr, _label_pstr , ## args ); \
-        } \
-      } \
-      if (wasClicked && (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM) == _menuItemNr) { \
-        lcd_quick_feedback(); \
+      itemSelected = encoderLine == _menuItemNr; \
+      if (lcdDrawUpdate) \
+        lcd_implementation_drawmenu_ ## type(itemSelected, _drawLineNr, PSTR(label), ## args); \
+      if (wasClicked && itemSelected) { \
         encoderRateMultiplierEnabled = true; \
         lastEncoderMovementMillis = 0; \
-        menu_action_ ## type ( args ); \
+        menu_action_ ## type(args); \
         return; \
       } \
     } \
     _menuItemNr++; \
   } while(0)
 #endif //ENCODER_RATE_MULTIPLIER
+
 #define MENU_ITEM_DUMMY() do { _menuItemNr++; } while(0)
-#define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
-#define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
+#define MENU_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## args)
+#define MENU_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## args)
 #ifdef ENCODER_RATE_MULTIPLIER
-  #define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
-  #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
+  #define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_ ## type, label, PSTR(label), ## args)
+  #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## args)
 #else //!ENCODER_RATE_MULTIPLIER
-  #define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label) , ## args )
-  #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label) , ## args )
+  #define MENU_MULTIPLIER_ITEM_EDIT(type, label, args...) MENU_ITEM(setting_edit_ ## type, label, PSTR(label), ## args)
+  #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(type, label, args...) MENU_ITEM(setting_edit_callback_ ## type, label, PSTR(label), ## args)
 #endif //!ENCODER_RATE_MULTIPLIER
 #define END_MENU() \
     if (encoderPosition / ENCODER_STEPS_PER_MENU_ITEM >= _menuItemNr) encoderPosition = _menuItemNr * ENCODER_STEPS_PER_MENU_ITEM - 1; \
@@ -349,16 +369,11 @@ static void lcd_sdcard_pause() { card.pauseSDPrint(); }
 static void lcd_sdcard_resume() { card.startFileprint(); }
 
 static void lcd_sdcard_stop() {
+  quickStop();
   card.sdprinting = false;
   card.closefile();
-  quickStop();
-  if (SD_FINISHED_STEPPERRELEASE) {
-    enquecommands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
-  }
   autotempShutdown();
-
   cancel_heatup = true;
-
   lcd_setstatus(MSG_PRINT_ABORTED);
 }
 
@@ -463,9 +478,9 @@ static void lcd_tune_menu() {
   #if TEMP_SENSOR_BED != 0
     MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
   #endif
-    MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
-    MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
-    MENU_ITEM_EDIT(int3, MSG_FLOW MSG_F0, &extruder_multiply[0], 10, 999);
+  MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
+  MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
+  MENU_ITEM_EDIT(int3, MSG_FLOW MSG_F0, &extruder_multiply[0], 10, 999);
   #if TEMP_SENSOR_1 != 0
     MENU_ITEM_EDIT(int3, MSG_FLOW MSG_F1, &extruder_multiply[1], 10, 999);
   #endif
diff --git a/Marlin/ultralcd_implementation_hitachi_HD44780.h b/Marlin/ultralcd_implementation_hitachi_HD44780.h
index 8ac0fac59..fe06a95f1 100644
--- a/Marlin/ultralcd_implementation_hitachi_HD44780.h
+++ b/Marlin/ultralcd_implementation_hitachi_HD44780.h
@@ -413,9 +413,8 @@ char lcd_printPGM(const char* str) {
 }
 
 char lcd_print(char* str) {
-  char c;
+  char c, n = 0;;
   unsigned char i = 0;
-  char n = 0;
   while((c = str[i++])) {
       n += charset_mapper(c);
   }
@@ -623,200 +622,104 @@ static void lcd_implementation_status_screen()
   lcd_print(lcd_status_message);
 }
 
-static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
-{
-    char c;
-    //Use all characters in narrow LCDs
-  #if LCD_WIDTH < 20
-      uint8_t n = LCD_WIDTH - 1 - 1;
-    #else
-      uint8_t n = LCD_WIDTH - 1 - 2;
-  #endif
-    lcd.setCursor(0, row);
-    lcd.print(pre_char);
-    while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
-    {
-        n -= lcd_print(c);
-        pstr++;
-    }
-    while(n--) {
-      lcd.print(' ');
-    }
-    lcd.print(post_char);
-    lcd.print(' ');
-}
-static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
-{
-    char c;
-    //Use all characters in narrow LCDs
-  #if LCD_WIDTH < 20
-      uint8_t n = LCD_WIDTH - 1 - 1 - lcd_strlen(data);
-    #else
-      uint8_t n = LCD_WIDTH - 1 - 2 - lcd_strlen(data);
-  #endif
-    lcd.setCursor(0, row);
-    lcd.print(pre_char);
-    while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) ) {
-      n -= lcd_print(c);
-      pstr++;
-    }
-    lcd.print(':');
-    while(n--)
-      lcd.print(' ');
-    lcd_print(data);
-}
-static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
-{
-    char c;
-    //Use all characters in narrow LCDs
-  #if LCD_WIDTH < 20
-      uint8_t n = LCD_WIDTH - 1 - 1 - lcd_strlen_P(data);
-    #else
-      uint8_t n = LCD_WIDTH - 1 - 2 - lcd_strlen_P(data);
-  #endif
-    lcd.setCursor(0, row);
-    lcd.print(pre_char);
-    while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) ) {
-      n -= lcd_print(c);
-      pstr++;
-    }
-    lcd.print(':');
-    while(n--)
-      lcd.print(' ');
-    lcd_printPGM(data);
+static void lcd_implementation_drawmenu_generic(bool sel, uint8_t row, const char* pstr, char pre_char, char post_char) {
+  char c;
+  uint8_t n = LCD_WIDTH - 1 - (LCD_WIDTH < 20 ? 1 : 2);
+  lcd.setCursor(0, row);
+  lcd.print(sel ? pre_char : ' ');
+  while ((c = pgm_read_byte(pstr)) && n > 0) {
+    n -= lcd_print(c);
+    pstr++;
+  }
+  while(n--) lcd.print(' ');
+  lcd.print(post_char);
+  lcd.print(' ');
 }
-#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float43_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float43(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
-#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
 
-//Add version for callback functions
-#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float43_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float43(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
-#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
-
-
-void lcd_implementation_drawedit(const char* pstr, char* value)
-{
-    lcd.setCursor(1, 1);
-    lcd_printPGM(pstr);
-    lcd.print(':');
-   #if LCD_WIDTH < 20
-      lcd.setCursor(LCD_WIDTH - lcd_strlen(value), 1);
-    #else
-      lcd.setCursor(LCD_WIDTH -1 - lcd_strlen(value), 1);
-   #endif
-    lcd_print(value);
-}
-static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
-{
-    char c;
-    uint8_t n = LCD_WIDTH - 1;
-    lcd.setCursor(0, row);
-    lcd.print('>');
-    if (longFilename[0] != '\0')
-    {
-        filename = longFilename;
-        longFilename[LCD_WIDTH-1] = '\0';
-    }
-    while( ((c = *filename) != '\0') && (n>0) )
-    {
-        n -= lcd_print(c);
-        filename++;
-    }
-    while(n--)
-        lcd.print(' ');
-}
-static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
-{
-    char c;
-    uint8_t n = LCD_WIDTH - 1;
-    lcd.setCursor(0, row);
-    lcd.print(' ');
-    if (longFilename[0] != '\0')
-    {
-        filename = longFilename;
-        longFilename[LCD_WIDTH-1] = '\0';
-    }
-    while( ((c = *filename) != '\0') && (n>0) )
-    {
-        n -= lcd_print(c);
-        filename++;
-    }
-    while(n--)
-        lcd.print(' ');
-}
-static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename) {
+static void lcd_implementation_drawmenu_setting_edit_generic(bool sel, uint8_t row, const char* pstr, char pre_char, char* data) {
   char c;
-  uint8_t n = LCD_WIDTH - 2;
+  uint8_t n = LCD_WIDTH - 1 - (LCD_WIDTH < 20 ? 1 : 2) - lcd_strlen(data);
   lcd.setCursor(0, row);
-  lcd.print('>');
-  lcd.print(LCD_STR_FOLDER[0]);
-  if (longFilename[0] != '\0') {
-    filename = longFilename;
-    longFilename[LCD_WIDTH-2] = '\0';
+  lcd.print(sel ? pre_char : ' ');
+  while ((c = pgm_read_byte(pstr)) && n > 0) {
+    n -= lcd_print(c);
+    pstr++;
   }
-  while( ((c = *filename) != '\0') && (n>0) ) {
+  lcd.print(':');
+  while (n--) lcd.print(' ');
+  lcd_print(data);
+}
+static void lcd_implementation_drawmenu_setting_edit_generic_P(bool sel, uint8_t row, const char* pstr, char pre_char, const char* data) {
+  char c;
+  uint8_t n = LCD_WIDTH - 1 - (LCD_WIDTH < 20 ? 1 : 2) - lcd_strlen_P(data);
+  lcd.setCursor(0, row);
+  lcd.print(sel ? pre_char : ' ');
+  while ((c = pgm_read_byte(pstr)) && n > 0) {
     n -= lcd_print(c);
-    filename++;
+    pstr++;
   }
-  while(n--)
-    lcd.print(' ');
+  lcd.print(':');
+  while (n--) lcd.print(' ');
+  lcd_printPGM(data);
+}
+
+#define lcd_implementation_drawmenu_setting_edit_int3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', itostr3(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float3(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr3(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float32(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr32(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float43(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr43(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float52(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr52(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float51(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr51(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_long5(sel, row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
+
+//Add version for callback functions
+#define lcd_implementation_drawmenu_setting_edit_callback_int3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', itostr3(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float3(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr3(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float32(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr32(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float43(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr43(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float52(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr52(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float51(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr51(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_long5(sel, row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', ftostr5(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
+
+void lcd_implementation_drawedit(const char* pstr, char* value) {
+  lcd.setCursor(1, 1);
+  lcd_printPGM(pstr);
+  lcd.print(':');
+  lcd.setCursor(LCD_WIDTH - (LCD_WIDTH < 20 ? 0 : 1) - lcd_strlen(value), 1);
+  lcd_print(value);
 }
-static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename) {
+
+static void lcd_implementation_drawmenu_sd(bool sel, uint8_t row, const char* pstr, const char* filename, char* longFilename, uint8_t concat) {
   char c;
-  uint8_t n = LCD_WIDTH - 2;
+  uint8_t n = LCD_WIDTH - concat;
   lcd.setCursor(0, row);
-  lcd.print(' ');
-  lcd.print(LCD_STR_FOLDER[0]);
-  if (longFilename[0] != '\0') {
+  lcd.print(sel ? '>' : ' ');
+  if (longFilename[0]) {
     filename = longFilename;
-    longFilename[LCD_WIDTH-2] = '\0';
+    longFilename[n] = '\0';
   }
-  while( ((c = *filename) != '\0') && (n>0) ) {
+  while ((c = *filename) && n > 0) {
     n -= lcd_print(c);
     filename++;
   }
-  while(n--)
-    lcd.print(' ');
+  while (n--) lcd.print(' ');
+}
+
+static void lcd_implementation_drawmenu_sdfile(bool sel, uint8_t row, const char* pstr, const char* filename, char* longFilename) {
+  lcd_implementation_drawmenu_sd(sel, row, pstr, filename, longFilename, 1);
 }
-#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
-#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
-#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
-#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
-#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
-#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
-#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
-#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
+
+static void lcd_implementation_drawmenu_sddirectory(bool sel, uint8_t row, const char* pstr, const char* filename, char* longFilename) {
+  lcd_implementation_drawmenu_sd(sel, row, pstr, filename, longFilename, 2);
+}
+
+#define lcd_implementation_drawmenu_back(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
+#define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
+#define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
+#define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
 
 static void lcd_implementation_quick_feedback()
 {