From 082f6a27dece8d1883751d3f2af1c2b0f0b6802c Mon Sep 17 00:00:00 2001 From: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Sat, 12 Jan 2019 01:41:48 -0500 Subject: [PATCH] ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) --- Marlin/Configuration_adv.h | 2 + Marlin/src/Marlin.cpp | 15 +-- Marlin/src/Marlin.h | 18 --- Marlin/src/config/default/Configuration_adv.h | 2 + .../AlephObjects/TAZ4/Configuration_adv.h | 2 + .../examples/Anet/A2/Configuration_adv.h | 2 + .../examples/Anet/A2plus/Configuration_adv.h | 2 + .../examples/Anet/A6/Configuration_adv.h | 2 + .../examples/Anet/A8/Configuration_adv.h | 2 + .../config/examples/ArmEd/Configuration_adv.h | 2 + .../BIBO/TouchX/cyclops/Configuration_adv.h | 2 + .../BIBO/TouchX/default/Configuration_adv.h | 2 + .../examples/BQ/Hephestos/Configuration_adv.h | 2 + .../BQ/Hephestos_2/Configuration_adv.h | 2 + .../examples/BQ/WITBOX/Configuration_adv.h | 2 + .../examples/Cartesio/Configuration_adv.h | 2 + .../Creality/CR-10/Configuration_adv.h | 2 + .../Creality/CR-10S/Configuration_adv.h | 2 + .../Creality/CR-10mini/Configuration_adv.h | 2 + .../Creality/CR-8/Configuration_adv.h | 2 + .../Creality/Ender-2/Configuration_adv.h | 2 + .../Creality/Ender-3/Configuration_adv.h | 2 + .../Creality/Ender-4/Configuration_adv.h | 2 + .../examples/Einstart-S/Configuration_adv.h | 2 + .../config/examples/Felix/Configuration_adv.h | 2 + .../FolgerTech/i3-2020/Configuration_adv.h | 2 + .../Formbot/Raptor/Configuration_adv.h | 2 + .../Formbot/T_Rex_2+/Configuration_adv.h | 2 + .../Formbot/T_Rex_3/Configuration_adv.h | 2 + .../Geeetech/MeCreator2/Configuration_adv.h | 2 + .../Prusa i3 Pro C/Configuration_adv.h | 2 + .../Prusa i3 Pro W/Configuration_adv.h | 2 + .../Infitary/i3-M508/Configuration_adv.h | 2 + .../examples/JGAurora/A5/Configuration_adv.h | 2 + .../examples/MakerParts/Configuration_adv.h | 2 + .../examples/Malyan/M150/Configuration_adv.h | 2 + .../examples/Malyan/M200/Configuration_adv.h | 2 + .../Micromake/C1/enhanced/Configuration_adv.h | 2 + .../examples/Mks/Robin/Configuration_adv.h | 2 + .../examples/Mks/Sbase/Configuration_adv.h | 2 + .../examples/RigidBot/Configuration_adv.h | 2 + .../config/examples/SCARA/Configuration_adv.h | 2 + .../examples/Sanguinololu/Configuration_adv.h | 2 + .../examples/TheBorg/Configuration_adv.h | 2 + .../examples/TinyBoy2/Configuration_adv.h | 2 + .../examples/Tronxy/X3A/Configuration_adv.h | 2 + .../UltiMachine/Archim1/Configuration_adv.h | 2 + .../UltiMachine/Archim2/Configuration_adv.h | 2 + .../examples/VORONDesign/Configuration_adv.h | 2 + .../config/examples/VORONDesign/_Bootscreen.h | 2 +- .../Velleman/K8200/Configuration_adv.h | 2 + .../Velleman/K8400/Configuration_adv.h | 2 + .../Wanhao/Duplicator 6/Configuration_adv.h | 2 + .../delta/Anycubic/Kossel/Configuration_adv.h | 2 + .../FLSUN/auto_calibrate/Configuration_adv.h | 2 + .../delta/FLSUN/kossel/Configuration_adv.h | 2 + .../FLSUN/kossel_mini/Configuration_adv.h | 2 + .../Geeetech/Rostock 301/Configuration_adv.h | 2 + .../delta/MKS/SBASE/Configuration_adv.h | 2 + .../Tevo Little Monster/Configuration_adv.h | 2 + .../delta/generic/Configuration_adv.h | 2 + .../delta/kossel_mini/Configuration_adv.h | 2 + .../delta/kossel_xl/Configuration_adv.h | 2 + .../gCreate/gMax1.5+/Configuration_adv.h | 2 + .../examples/makibox/Configuration_adv.h | 2 + .../tvrrug/Round2/Configuration_adv.h | 2 + .../config/examples/wt150/Configuration_adv.h | 2 + Marlin/src/feature/power.cpp | 2 +- Marlin/src/feature/power_loss_recovery.cpp | 2 +- Marlin/src/gcode/control/M42.cpp | 10 +- Marlin/src/gcode/control/M80_M81.cpp | 6 +- Marlin/src/gcode/temperature/M106_M107.cpp | 52 ++------ Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp | 18 +-- Marlin/src/lcd/dogm/status_screen_DOGM.cpp | 19 ++- .../lcd/dogm/status_screen_lite_ST7920.cpp | 15 ++- Marlin/src/lcd/extensible_ui/ui_api.cpp | 12 +- Marlin/src/lcd/extensible_ui/ui_api.h | 5 +- Marlin/src/lcd/malyanlcd.cpp | 2 +- Marlin/src/lcd/menu/menu_main.cpp | 2 +- Marlin/src/lcd/menu/menu_temperature.cpp | 22 ++-- Marlin/src/lcd/menu/menu_tune.cpp | 16 +-- Marlin/src/module/planner.cpp | 8 +- Marlin/src/module/probe.cpp | 20 +-- Marlin/src/module/probe.h | 4 - Marlin/src/module/temperature.cpp | 117 +++++++++++++++++- Marlin/src/module/temperature.h | 65 ++++++++++ Marlin/src/module/tool_change.cpp | 4 +- buildroot/share/tests/LPC1768_tests | 2 +- 88 files changed, 405 insertions(+), 161 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 6d47a3b71..25ec655a4 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp index 4792f2438..72e59c3e4 100644 --- a/Marlin/src/Marlin.cpp +++ b/Marlin/src/Marlin.cpp @@ -164,17 +164,6 @@ bool Running = true; TempUnit input_temp_units = TEMPUNIT_C; #endif -#if FAN_COUNT > 0 - uint8_t fan_speed[FAN_COUNT] = { 0 }; - #if ENABLED(EXTRA_FAN_SPEED) - uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT]; - #endif - #if ENABLED(PROBING_FANS_OFF) - bool fans_paused; // = false; - uint8_t paused_fan_speed[FAN_COUNT] = { 0 }; - #endif -#endif - // For M109 and M190, this flag may be cleared (by M108) to exit the wait loop volatile bool wait_for_heatup = true; @@ -655,7 +644,7 @@ void stop() { print_job_timer.stop(); #if ENABLED(PROBING_FANS_OFF) - if (fans_paused) fans_pause(false); // put things back the way they were + if (thermalManager.fans_paused) thermalManager.set_fans_paused(false); // put things back the way they were #endif if (IsRunning()) { @@ -976,7 +965,7 @@ void loop() { quickstop_stepper(); print_job_timer.stop(); thermalManager.disable_all_heaters(); - zero_fan_speeds(); + thermalManager.zero_fan_speeds(); wait_for_heatup = false; #if ENABLED(POWER_LOSS_RECOVERY) card.removeJobRecoveryFile(); diff --git a/Marlin/src/Marlin.h b/Marlin/src/Marlin.h index 1ccac95e5..9b66460c6 100644 --- a/Marlin/src/Marlin.h +++ b/Marlin/src/Marlin.h @@ -81,24 +81,6 @@ extern volatile bool wait_for_heatup; // Inactivity shutdown timer extern millis_t max_inactive_time, stepper_inactive_time; -#if FAN_COUNT > 0 - extern uint8_t fan_speed[FAN_COUNT]; - #if ENABLED(EXTRA_FAN_SPEED) - extern uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT]; - #endif - #if ENABLED(PROBING_FANS_OFF) - extern bool fans_paused; - extern uint8_t paused_fan_speed[FAN_COUNT]; - #endif - #define FANS_LOOP(I) LOOP_L_N(I, FAN_COUNT) -#endif - -inline void zero_fan_speeds() { - #if FAN_COUNT > 0 - FANS_LOOP(i) fan_speed[i] = 0; - #endif -} - #if ENABLED(USE_CONTROLLER_FAN) extern uint8_t controllerfan_speed; #endif diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index 6d47a3b71..25ec655a4 100755 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 78517285e..a505ca9b0 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h index 65c7085cb..5efa35f32 100644 --- a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h index 65c7085cb..5efa35f32 100644 --- a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index c35759bfc..52291cde1 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 99a22b0aa..50413ec6f 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/ArmEd/Configuration_adv.h b/Marlin/src/config/examples/ArmEd/Configuration_adv.h index bc634b2b0..f6eb65317 100644 --- a/Marlin/src/config/examples/ArmEd/Configuration_adv.h +++ b/Marlin/src/config/examples/ArmEd/Configuration_adv.h @@ -81,6 +81,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index d64b0bf6d..3ca6432c7 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 45 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h index d0990b4a9..04012fcdf 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index b3bbbc261..4088fb510 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index 26602d8f4..ddf0e28a6 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index b3bbbc261..4088fb510 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index 6386dbe24..0be82a99d 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 2a95e6d06..42c098888 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index f9f056385..c3599eb70 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h index bd2366c3f..0b2df5ace 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h index 5ce2d6588..ab94bb372 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h index 6b869936c..6d8ad819d 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h index c7244e7b1..9f4783d3e 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h index 4c6bfb9f4..15e753870 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h index 326b365e6..8e723b5c0 100644 --- a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h +++ b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index ded7b602e..1aa306536 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 9256e45f8..ec6eb7bc2 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h index 47cf2f9af..7f9d63071 100644 --- a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 210 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 3c6358d66..306d4c9cc 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 7f9cac028..3e771dfdc 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 7ae209c2f..e34e37853 100644 --- a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 5a16712c9..d66c99e7d 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 5a16712c9..d66c99e7d 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index 842106676..43918b0e0 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index 3cceb01ea..7c0222bb5 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index ea2cea1a2..85beaa8fb 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index 209978a40..6ab3697cb 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index 28ad8c8bc..ca7c5ca7c 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index cea080ffa..0ff5f76a2 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h index 10f6d5819..01207d3ab 100644 --- a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index 3492ff525..393edceb4 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 50 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index be28001a3..de062d7e3 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index 2eba90b99..dcca0eadc 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index eae71de53..4c1e4ea17 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index 3e62ac095..b5ec4b6b8 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 50 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index 5243eb78b..7a54b52c5 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h index 05dc42128..cb59d0144 100644 --- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h index 09ffd0d6f..a8ebcd0ce 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index 6bd5580f9..110798895 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h index 79a1f1545..2613067a0 100644 --- a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h +++ b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/VORONDesign/_Bootscreen.h b/Marlin/src/config/examples/VORONDesign/_Bootscreen.h index bce4b0d4c..13e777f03 100644 --- a/Marlin/src/config/examples/VORONDesign/_Bootscreen.h +++ b/Marlin/src/config/examples/VORONDesign/_Bootscreen.h @@ -77,5 +77,5 @@ const unsigned char custom_start_bmp[] PROGMEM = { B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 }; diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index 3a3063990..ab4865d4c 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -87,6 +87,8 @@ #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index 665eb5255..5cbde84ec 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 5682109d8..b94637a1b 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 5cb5add8b..7633d4e26 100644 --- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 051df3dd3..c9926bcb6 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 051df3dd3..c9926bcb6 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index eae4151cd..d36ea2ec4 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index f2c7f9aa7..7fd887b45 100644 --- a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h index c537f9ca0..4d2031422 100644 --- a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 50 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 70070b11c..4a6179d2a 100644 --- a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index eae4151cd..d36ea2ec4 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index eae4151cd..d36ea2ec4 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 3504f662f..ef13bc321 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 301ffacd5..5c45b876e 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 50 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 3 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index 69b84b257..e1b192b1c 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index ff6dd2f42..d4cb2606c 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index 57e3e714f..52b99e692 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -77,6 +77,8 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + /** * Whenever an M104, M109, or M303 increases the target temperature, the * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature diff --git a/Marlin/src/feature/power.cpp b/Marlin/src/feature/power.cpp index 892166ba1..537413581 100644 --- a/Marlin/src/feature/power.cpp +++ b/Marlin/src/feature/power.cpp @@ -39,7 +39,7 @@ millis_t Power::lastPowerOn; bool Power::is_power_needed() { #if ENABLED(AUTO_POWER_FANS) - FANS_LOOP(i) if (fan_speed[i]) return true; + FANS_LOOP(i) if (thermalManager.fan_speed[i]) return true; #endif #if ENABLED(AUTO_POWER_E_FANS) diff --git a/Marlin/src/feature/power_loss_recovery.cpp b/Marlin/src/feature/power_loss_recovery.cpp index 6de329051..a53829ef0 100644 --- a/Marlin/src/feature/power_loss_recovery.cpp +++ b/Marlin/src/feature/power_loss_recovery.cpp @@ -162,7 +162,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const bool save_queue/*= #endif #if FAN_COUNT - COPY(info.fan_speed, fan_speed); + COPY(info.fan_speed, thermalManager.fan_speed); #endif #if HAS_LEVELING diff --git a/Marlin/src/gcode/control/M42.cpp b/Marlin/src/gcode/control/M42.cpp index 2a7323a86..efd6b0ef0 100644 --- a/Marlin/src/gcode/control/M42.cpp +++ b/Marlin/src/gcode/control/M42.cpp @@ -24,6 +24,10 @@ #include "../../Marlin.h" // for pin_is_protected #include "../../inc/MarlinConfig.h" +#if FAN_COUNT > 0 + #include "../../module/temperature.h" +#endif + /** * M42: Change pin status via GCode * @@ -52,13 +56,13 @@ void GcodeSuite::M42() { #if FAN_COUNT > 0 switch (pin) { #if HAS_FAN0 - case FAN_PIN: fan_speed[0] = pin_status; break; + case FAN_PIN: thermalManager.fan_speed[0] = pin_status; break; #endif #if HAS_FAN1 - case FAN1_PIN: fan_speed[1] = pin_status; break; + case FAN1_PIN: thermalManager.fan_speed[1] = pin_status; break; #endif #if HAS_FAN2 - case FAN2_PIN: fan_speed[2] = pin_status; break; + case FAN2_PIN: thermalManager.fan_speed[2] = pin_status; break; #endif } #endif diff --git a/Marlin/src/gcode/control/M80_M81.cpp b/Marlin/src/gcode/control/M80_M81.cpp index 3dbf15a79..b4a7b81d8 100644 --- a/Marlin/src/gcode/control/M80_M81.cpp +++ b/Marlin/src/gcode/control/M80_M81.cpp @@ -100,10 +100,10 @@ void GcodeSuite::M81() { planner.finish_and_disable(); #if FAN_COUNT > 0 - zero_fan_speeds(); + thermalManager.zero_fan_speeds(); #if ENABLED(PROBING_FANS_OFF) - fans_paused = false; - ZERO(paused_fan_speed); + thermalManager.fans_paused = false; + ZERO(thermalManager.paused_fan_speed); #endif #endif diff --git a/Marlin/src/gcode/temperature/M106_M107.cpp b/Marlin/src/gcode/temperature/M106_M107.cpp index 5fcf465e7..8b9daa779 100644 --- a/Marlin/src/gcode/temperature/M106_M107.cpp +++ b/Marlin/src/gcode/temperature/M106_M107.cpp @@ -25,13 +25,9 @@ #if FAN_COUNT > 0 #include "../gcode.h" -#include "../../Marlin.h" // for fan_speed - #include "../../module/motion.h" +#include "../../module/temperature.h" -#if ENABLED(SINGLENOZZLE) - #include "../../module/tool_change.h" -#endif /** * M106: Set Fan Speed @@ -50,39 +46,16 @@ void GcodeSuite::M106() { const uint8_t p = parser.byteval('P', MIN(active_extruder, FAN_COUNT - 1)); if (p < MIN(EXTRUDERS, FAN_COUNT)) { - uint16_t s = parser.ushortval('S', 255); - NOMORE(s, 255U); - - uint8_t np = p; - - #if ENABLED(SINGLENOZZLE) - if (p != active_extruder) { - if (p < EXTRUDERS) singlenozzle_fan_speed[p] = s; - return; - } - np = 0; // Always use fan index 0 with SINGLENOZZLE - #endif #if ENABLED(EXTRA_FAN_SPEED) const int16_t t = parser.intval('T'); - if (t > 0) { - switch (t) { - case 1: - fan_speed[np] = old_fan_speed[np]; - break; - case 2: - old_fan_speed[np] = fan_speed[np]; - fan_speed[np] = new_fan_speed[np]; - break; - default: - new_fan_speed[np] = MIN(t, 255U); - break; - } - return; - } - #endif // EXTRA_FAN_SPEED + if (t > 0) return thermalManager.set_temp_fan_speed(p, t); + #endif + + uint16_t s = parser.ushortval('S', 255); + NOMORE(s, 255U); - fan_speed[np] = s; + thermalManager.set_fan_speed(p, s); } } @@ -90,16 +63,7 @@ void GcodeSuite::M106() { * M107: Fan Off */ void GcodeSuite::M107() { - const uint16_t p = parser.byteval('P', active_extruder); - - #if ENABLED(SINGLENOZZLE) - if (p != active_extruder) { - if (p < EXTRUDERS) singlenozzle_fan_speed[p] = 0; - return; - } - #endif - - if (p < MIN(EXTRUDERS, FAN_COUNT)) fan_speed[p] = 0; + thermalManager.set_fan_speed(parser.byteval('P', active_extruder), 0); } #endif // FAN_COUNT > 0 diff --git a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp index c309500b1..e9f552f88 100644 --- a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp +++ b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp @@ -866,11 +866,15 @@ void MarlinUI::draw_status_screen() { _draw_print_progress(); #else char c; - int per; + uint16_t per; #if HAS_FAN0 - if (blink) { - c = 'F'; - per = ((int(fan_speed[0]) + 1) * 100) / 256; + if (blink || thermalManager.fan_speed_scaler[0] < 128) { + uint16_t spd = thermalManager.fan_speed[0]; + if (blink) c = 'F'; + #if ENABLED(ADAPTIVE_FAN_SLOWING) + else { c = '*'; spd = (spd * thermalManager.fan_speed_scaler[0]) >> 7; } + #endif + per = thermalManager.fanPercent(spd); } else #endif @@ -1049,13 +1053,13 @@ void MarlinUI::draw_status_screen() { #if FAN_COUNT > 0 if (0 #if HAS_FAN0 - || fan_speed[0] + || thermalManager.fan_speed[0] #endif #if HAS_FAN1 - || fan_speed[1] + || thermalManager.fan_speed[1] #endif #if HAS_FAN2 - || fan_speed[2] + || thermalManager.fan_speed[2] #endif ) leds |= LED_C; #endif // FAN_COUNT > 0 diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp index 4f044c0b2..b265e6d6c 100644 --- a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp @@ -291,7 +291,7 @@ void MarlinUI::draw_status_screen() { static uint8_t fan_frame; if (old_blink != blink) { old_blink = blink; - if (!fan_speed[0] || ++fan_frame >= STATUS_FAN_FRAMES) fan_frame = 0; + if (!thermalManager.fan_speed[0] || ++fan_frame >= STATUS_FAN_FRAMES) fan_frame = 0; } #endif if (PAGE_CONTAINS(STATUS_FAN_Y, STATUS_FAN_Y + STATUS_FAN_HEIGHT - 1)) @@ -305,7 +305,7 @@ void MarlinUI::draw_status_screen() { fan_frame == 3 ? status_fan3_bmp : #endif #elif STATUS_FAN_FRAMES > 1 - blink && fan_speed[0] ? status_fan1_bmp : + blink && thermalManager.fan_speed[0] ? status_fan1_bmp : #endif status_fan0_bmp ); @@ -328,11 +328,18 @@ void MarlinUI::draw_status_screen() { // Fan, if a bitmap was provided #if DO_DRAW_FAN if (PAGE_CONTAINS(STATUS_FAN_TEXT_Y - INFO_FONT_ASCENT, STATUS_FAN_TEXT_Y - 1)) { - const int per = ((int(fan_speed[0]) + 1) * 100) / 256; - if (per) { + char c = '%'; + uint16_t spd = thermalManager.fan_speed[0]; + if (spd) { + #if ENABLED(ADAPTIVE_FAN_SLOWING) + if (!blink && thermalManager.fan_speed_scaler[0] < 128) { + spd = (spd * thermalManager.fan_speed_scaler[0]) >> 7; + c = '*'; + } + #endif lcd_moveto(STATUS_FAN_TEXT_X, STATUS_FAN_TEXT_Y); - lcd_put_u8str(itostr3(per)); - lcd_put_wchar('%'); + lcd_put_u8str(itostr3(thermalManager.fanPercent(spd))); + lcd_put_wchar(c); } } #endif diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp index 126ef00b5..af7cc433e 100644 --- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp +++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp @@ -707,7 +707,7 @@ bool ST7920_Lite_Status_Screen::indicators_changed() { // them only during blinks we gain a bit of stability. const bool blink = ui.get_blink(); const uint16_t feedrate_perc = feedrate_percentage; - const uint8_t fs = (((uint16_t)fan_speed[0] + 1) * 100) / 256; + const uint16_t fs = (thermalManager.fan_speed[0] * uint16_t(thermalManager.fan_speed_scaler[0])) >> 7; const int16_t extruder_1_target = thermalManager.degTargetHotend(0); #if HOTENDS > 1 const int16_t extruder_2_target = thermalManager.degTargetHotend(1); @@ -734,7 +734,6 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) { const bool blink = ui.get_blink(); const duration_t elapsed = print_job_timer.duration(); const uint16_t feedrate_perc = feedrate_percentage; - const uint8_t fs = (((uint16_t)fan_speed[0] + 1) * 100) / 256; const int16_t extruder_1_temp = thermalManager.degHotend(0), extruder_1_target = thermalManager.degTargetHotend(0); #if HOTENDS > 1 @@ -753,12 +752,20 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) { #if HAS_HEATED_BED draw_bed_temp(bed_temp, bed_target, forceUpdate); #endif - draw_fan_speed(fs); + + uint16_t spd = thermalManager.fan_speed[0]; + + #if ENABLED(ADAPTIVE_FAN_SLOWING) + if (!blink && thermalManager.fan_speed_scaler[0] < 128) + spd = (spd * thermalManager.fan_speed_scaler[0]) >> 7; + #endif + + draw_fan_speed(thermalManager.fanPercent(spd)); draw_print_time(elapsed); draw_feedrate_percentage(feedrate_perc); // Update the fan and bed animations - if (fs) draw_fan_icon(blink); + if (spd) draw_fan_icon(blink); #if HAS_HEATED_BED draw_heat_icon(bed_target > 0 && blink, bed_target > 0); #endif diff --git a/Marlin/src/lcd/extensible_ui/ui_api.cpp b/Marlin/src/lcd/extensible_ui/ui_api.cpp index 75f9464a0..f5a130126 100644 --- a/Marlin/src/lcd/extensible_ui/ui_api.cpp +++ b/Marlin/src/lcd/extensible_ui/ui_api.cpp @@ -180,7 +180,13 @@ namespace ExtUI { return thermalManager.degTargetHotend(extruder - E0); } - float getFan_percent(const fan_t fan) { return ((float(fan_speed[fan - FAN0]) + 1) * 100) / 256; } + float getTargetFan_percent(const fan_t fan) { + return thermalManager.fanPercent(thermalManager.fan_speed[fan - FAN0]); + } + + float getActualFan_percent(const fan_t fan) { + return thermalManager.fanPercent((thermalManager.fan_speed[fan - FAN0] * uint16_t(thermalManager.fan_speed_scaler[fan - FAN0])) >> 7); + } float getAxisPosition_mm(const axis_t axis) { return flags.manual_motion ? destination[axis] : current_position[axis]; @@ -560,9 +566,9 @@ namespace ExtUI { thermalManager.setTargetHotend(clamp(value, 0, heater_maxtemp[e] - 15), e); } - void setFan_percent(float value, const fan_t fan) { + void setTargetFan_percent(const float value, const fan_t fan) { if (fan < FAN_COUNT) - fan_speed[fan - FAN0] = clamp(round(value * 255 / 100), 0, 255); + thermalManager.set_fan_speed(fan - FAN0, map(value, 0, 100, 0, 255)); } void setFeedrate_percent(const float value) { diff --git a/Marlin/src/lcd/extensible_ui/ui_api.h b/Marlin/src/lcd/extensible_ui/ui_api.h index 1a86680a1..9a61ef75b 100644 --- a/Marlin/src/lcd/extensible_ui/ui_api.h +++ b/Marlin/src/lcd/extensible_ui/ui_api.h @@ -72,7 +72,8 @@ namespace ExtUI { float getActualTemp_celsius(const extruder_t); float getTargetTemp_celsius(const heater_t); float getTargetTemp_celsius(const extruder_t); - float getFan_percent(const fan_t); + float getTargetFan_percent(const fan_t); + float getActualFan_percent(const fan_t); float getAxisPosition_mm(const axis_t); float getAxisPosition_mm(const extruder_t); float getAxisSteps_per_mm(const axis_t); @@ -100,7 +101,7 @@ namespace ExtUI { void setTargetTemp_celsius(const float, const heater_t); void setTargetTemp_celsius(const float, const extruder_t); - void setFan_percent(const float, const fan_t); + void setTargetFan_percent(const float, const fan_t); void setAxisPosition_mm(const float, const axis_t); void setAxisPosition_mm(const float, const extruder_t); void setAxisSteps_per_mm(const float, const axis_t); diff --git a/Marlin/src/lcd/malyanlcd.cpp b/Marlin/src/lcd/malyanlcd.cpp index a88fa62ca..ece494651 100644 --- a/Marlin/src/lcd/malyanlcd.cpp +++ b/Marlin/src/lcd/malyanlcd.cpp @@ -255,7 +255,7 @@ void process_lcd_p_command(const char* command) { quickstop_stepper(); print_job_timer.stop(); thermalManager.disable_all_heaters(); - zero_fan_speeds(); + thermalManager.zero_fan_speeds(); wait_for_heatup = false; write_to_lcd_P(PSTR("{SYS:STARTED}")); #endif diff --git a/Marlin/src/lcd/menu/menu_main.cpp b/Marlin/src/lcd/menu/menu_main.cpp index 30dd6c333..4e419d84a 100644 --- a/Marlin/src/lcd/menu/menu_main.cpp +++ b/Marlin/src/lcd/menu/menu_main.cpp @@ -54,7 +54,7 @@ void lcd_pause() { void lcd_resume() { #if ENABLED(SDSUPPORT) if (card.isPaused()) enqueue_and_echo_commands_P(PSTR("M24")); - #elif ENABLED(ACTION_ON_RESUME) + #elif defined(ACTION_ON_RESUME) SERIAL_ECHOLNPGM("//action:" ACTION_ON_RESUME); #endif } diff --git a/Marlin/src/lcd/menu/menu_temperature.cpp b/Marlin/src/lcd/menu/menu_temperature.cpp index e0d559025..571e1e257 100644 --- a/Marlin/src/lcd/menu/menu_temperature.cpp +++ b/Marlin/src/lcd/menu/menu_temperature.cpp @@ -52,9 +52,9 @@ void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb #endif #if FAN_COUNT > 0 #if FAN_COUNT > 1 - fan_speed[active_extruder < FAN_COUNT ? active_extruder : 0] = fan; + thermalManager.set_fan_speed(active_extruder < FAN_COUNT ? active_extruder : 0, fan); #else - fan_speed[0] = fan; + thermalManager.set_fan_speed(0, fan); #endif #else UNUSED(fan); @@ -292,7 +292,7 @@ void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb } void lcd_cooldown() { - zero_fan_speeds(); + thermalManager.zero_fan_speeds(); thermalManager.disable_all_heaters(); ui.return_to_status(); } @@ -339,21 +339,21 @@ void menu_temperature() { // #if FAN_COUNT > 0 #if HAS_FAN0 - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fan_speed[0], 0, 255); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.lcd_tmpfan_speed[0], 0, 255, thermalManager.lcd_setFanSpeed0); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fan_speed[0], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.new_fan_speed[0], 3, 255); #endif #endif - #if HAS_FAN1 - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 2", &fan_speed[1], 0, 255); + #if HAS_FAN1 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 1) + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED " 2", &thermalManager.lcd_tmpfan_speed[1], 0, 255, thermalManager.lcd_setFanSpeed1); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &new_fan_speed[1], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &thermalManager.new_fan_speed[1], 3, 255); #endif #endif - #if HAS_FAN2 - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 3", &fan_speed[2], 0, 255); + #if HAS_FAN2 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 2) + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED " 3", &thermalManager.lcd_tmpfan_speed[2], 0, 255, thermalManager.lcd_setFanSpeed2); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &new_fan_speed[2], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &thermalManager.new_fan_speed[2], 3, 255); #endif #endif #endif // FAN_COUNT > 0 diff --git a/Marlin/src/lcd/menu/menu_tune.cpp b/Marlin/src/lcd/menu/menu_tune.cpp index b3e41fa5d..4eb05b55f 100644 --- a/Marlin/src/lcd/menu/menu_tune.cpp +++ b/Marlin/src/lcd/menu/menu_tune.cpp @@ -141,21 +141,21 @@ void menu_tune() { // #if FAN_COUNT > 0 #if HAS_FAN0 - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fan_speed[0], 0, 255); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.lcd_tmpfan_speed[0], 0, 255, thermalManager.lcd_setFanSpeed0); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fan_speed[0], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &thermalManager.new_fan_speed[0], 3, 255); #endif #endif - #if HAS_FAN1 - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 2", &fan_speed[1], 0, 255); + #if HAS_FAN1 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 1) + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED " 2", &thermalManager.lcd_tmpfan_speed[1], 0, 255, thermalManager.lcd_setFanSpeed1); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &new_fan_speed[1], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &thermalManager.new_fan_speed[1], 3, 255); #endif #endif - #if HAS_FAN2 - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 3", &fan_speed[2], 0, 255); + #if HAS_FAN2 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 2) + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int8, MSG_FAN_SPEED " 3", &thermalManager.lcd_tmpfan_speed[2], 0, 255, thermalManager.lcd_setFanSpeed2); #if ENABLED(EXTRA_FAN_SPEED) - MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &new_fan_speed[2], 3, 255); + MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &thermalManager.new_fan_speed[2], 3, 255); #endif #endif #endif // FAN_COUNT > 0 diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index 523cfcaf9..056817c8d 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -1178,10 +1178,9 @@ void Planner::check_axes_activity() { #endif if (has_blocks_queued()) { - #if FAN_COUNT > 0 FANS_LOOP(i) - tail_fan_speed[i] = block_buffer[block_buffer_tail].fan_speed[i]; + tail_fan_speed[i] = (block_buffer[block_buffer_tail].fan_speed[i] * uint16_t(thermalManager.fan_speed_scaler[i])) >> 7; #endif block_t* block; @@ -1203,7 +1202,8 @@ void Planner::check_axes_activity() { } else { #if FAN_COUNT > 0 - FANS_LOOP(i) tail_fan_speed[i] = fan_speed[i]; + FANS_LOOP(i) + tail_fan_speed[i] = (thermalManager.fan_speed[i] * uint16_t(thermalManager.fan_speed_scaler[i])) >> 7; #endif #if ENABLED(BARICUDA) @@ -1903,7 +1903,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, #endif #if FAN_COUNT > 0 - FANS_LOOP(i) block->fan_speed[i] = fan_speed[i]; + FANS_LOOP(i) block->fan_speed[i] = thermalManager.fan_speed[i]; #endif #if ENABLED(BARICUDA) diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index 76be57144..9247aedf4 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -268,31 +268,13 @@ float zprobe_zoffset; // Initialized by settings.load() #endif // Z_PROBE_ALLEN_KEY -#if ENABLED(PROBING_FANS_OFF) - - void fans_pause(const bool p) { - if (p != fans_paused) { - fans_paused = p; - if (p) - for (uint8_t x = 0; x < FAN_COUNT; x++) { - paused_fan_speed[x] = fan_speed[x]; - fan_speed[x] = 0; - } - else - for (uint8_t x = 0; x < FAN_COUNT; x++) - fan_speed[x] = paused_fan_speed[x]; - } - } - -#endif // PROBING_FANS_OFF - #if QUIET_PROBING void probing_pause(const bool p) { #if ENABLED(PROBING_HEATERS_OFF) thermalManager.pause(p); #endif #if ENABLED(PROBING_FANS_OFF) - fans_pause(p); + thermalManager.set_fans_paused(p); #endif #if ENABLED(PROBING_STEPPERS_OFF) disable_e_steppers(); diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h index 830911a6b..138974bda 100644 --- a/Marlin/src/module/probe.h +++ b/Marlin/src/module/probe.h @@ -58,10 +58,6 @@ void probing_pause(const bool p); #endif -#if ENABLED(PROBING_FANS_OFF) - void fans_pause(const bool p); -#endif - #if ENABLED(BLTOUCH) void bltouch_command(int angle); bool set_bltouch_deployed(const bool deploy); diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 915bb5a85..e08b2332b 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -55,6 +55,10 @@ #include "../feature/leds/printer_event_leds.h" #endif +#if ENABLED(SINGLENOZZLE) + #include "tool_change.h" +#endif + #if HOTEND_USES_THERMISTOR #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) static void* heater_ttbl_map[2] = { (void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE }; @@ -92,14 +96,99 @@ Temperature thermalManager; // public: -float Temperature::current_temperature[HOTENDS] = { 0.0 }; -int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 }, - Temperature::target_temperature[HOTENDS] = { 0 }; +float Temperature::current_temperature[HOTENDS]; // = { 0.0 }; +int16_t Temperature::current_temperature_raw[HOTENDS], // = { 0 } + Temperature::target_temperature[HOTENDS]; // = { 0 } #if ENABLED(AUTO_POWER_E_FANS) - uint8_t Temperature::autofan_speed[HOTENDS] = { 0 }; + uint8_t Temperature::autofan_speed[HOTENDS]; // = { 0 } #endif +#if FAN_COUNT > 0 + + uint8_t Temperature::fan_speed[FAN_COUNT]; // = { 0 } + + #if ENABLED(EXTRA_FAN_SPEED) + uint8_t Temperature::old_fan_speed[FAN_COUNT], Temperature::new_fan_speed[FAN_COUNT]; + + void Temperature::set_temp_fan_speed(const uint8_t fan, const int16_t tmp_temp) { + switch (tmp_temp) { + case 1: + set_fan_speed(fan, old_fan_speed[fan]); + break; + case 2: + old_fan_speed[fan] = fan_speed[fan]; + set_fan_speed(fan, new_fan_speed[fan]); + break; + default: + new_fan_speed[fan] = MIN(tmp_temp, 255U); + break; + } + } + + #endif + + #if ENABLED(PROBING_FANS_OFF) + bool Temperature::fans_paused; // = false; + uint8_t Temperature::paused_fan_speed[FAN_COUNT]; // = { 0 } + #endif + + #if ENABLED(ADAPTIVE_FAN_SLOWING) + uint8_t Temperature::fan_speed_scaler[FAN_COUNT] = ARRAY_N(FAN_COUNT, 128, 128, 128, 128, 128, 128); + #endif + + #if HAS_LCD_MENU + + uint8_t Temperature::lcd_tmpfan_speed[ + #if ENABLED(SINGLENOZZLE) + MAX(EXTRUDERS, FAN_COUNT) + #else + FAN_COUNT + #endif + ]; // = { 0 } + + #endif + + void Temperature::set_fan_speed(uint8_t target, uint16_t speed) { + + NOMORE(speed, 255U); + + #if ENABLED(SINGLENOZZLE) + if (target != active_extruder) { + if (target < EXTRUDERS) singlenozzle_fan_speed[target] = speed; + return; + } + target = 0; // Always use fan index 0 with SINGLENOZZLE + #endif + + if (target >= FAN_COUNT) return; + + fan_speed[target] = speed; + #if ENABLED(ULTRA_LCD) + lcd_tmpfan_speed[target] = speed; + #endif + } + + #if ENABLED(PROBING_FANS_OFF) + + void Temperature::set_fans_paused(const bool p) { + if (p != fans_paused) { + fans_paused = p; + if (p) + for (uint8_t x = 0; x < FAN_COUNT; x++) { + paused_fan_speed[x] = fan_speed[x]; + fan_speed[x] = 0; + } + else + for (uint8_t x = 0; x < FAN_COUNT; x++) + fan_speed[x] = paused_fan_speed[x]; + } + } + + #endif // PROBING_FANS_OFF + +#endif // FAN_COUNT > 0 + #if HAS_HEATED_BED float Temperature::current_temperature_bed = 0.0; int16_t Temperature::current_temperature_bed_raw = 0, @@ -1529,18 +1618,38 @@ void Temperature::init() { switch (*state) { // Inactive state waits for a target temperature to be set case TRInactive: break; + // When first heating, wait for the temperature to be reached then go to Stable state case TRFirstHeating: if (current < tr_target_temperature[heater_index]) break; *state = TRStable; + // While the temperature is stable watch for a bad temperature case TRStable: + + #if ENABLED(ADAPTIVE_FAN_SLOWING) && FAN_COUNT > 0 + if (heater_id >= 0) { + const int fan_index = MIN(heater_id, FAN_COUNT - 1); + if (fan_speed[fan_index] == 0 || current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.25f)) + fan_speed_scaler[fan_index] = 128; + else if (current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.3335f)) + fan_speed_scaler[fan_index] = 96; + else if (current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.5f)) + fan_speed_scaler[fan_index] = 64; + else if (current >= tr_target_temperature[heater_id] - (hysteresis_degc * 0.8f)) + fan_speed_scaler[fan_index] = 32; + else + fan_speed_scaler[fan_index] = 0; + } + #endif + if (current >= tr_target_temperature[heater_index] - hysteresis_degc) { *timer = millis() + period_seconds * 1000UL; break; } else if (PENDING(millis(), *timer)) break; *state = TRRunaway; + case TRRunaway: _temp_error(heater_id, PSTR(MSG_T_THERMAL_RUNAWAY), TEMP_ERR_PSTR(MSG_THERMAL_RUNAWAY, heater_id)); } diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 31f8f2eb3..8468f059b 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -320,6 +320,71 @@ class Temperature { static float analog_to_celsiusChamber(const int raw); #endif + #if FAN_COUNT > 0 + + static uint8_t fan_speed[FAN_COUNT]; + #define FANS_LOOP(I) LOOP_L_N(I, FAN_COUNT) + + static void set_fan_speed(const uint8_t target, const uint16_t speed); + + #if ENABLED(PROBING_FANS_OFF) + static bool fans_paused; + static uint8_t paused_fan_speed[FAN_COUNT]; + #endif + + static constexpr inline uint8_t fanPercent(const uint8_t speed) { return (int(speed) * 100 + 127) / 255; } + + #if ENABLED(ADAPTIVE_FAN_SLOWING) + static uint8_t fan_speed_scaler[FAN_COUNT]; + #else + static constexpr uint8_t fan_speed_scaler[FAN_COUNT] = ARRAY_N(FAN_COUNT, 128, 128, 128, 128, 128, 128); + #endif + + static inline uint8_t lcd_fanSpeedActual(const uint8_t target) { + return (fan_speed[target] * uint16_t(fan_speed_scaler[target])) >> 7; + } + + #if ENABLED(EXTRA_FAN_SPEED) + static uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT]; + static void set_temp_fan_speed(const uint8_t fan, const int16_t tmp_temp); + #endif + + #if HAS_LCD_MENU + + static uint8_t lcd_tmpfan_speed[ + #if ENABLED(SINGLENOZZLE) + MAX(EXTRUDERS, FAN_COUNT) + #else + FAN_COUNT + #endif + ]; + + static inline void lcd_setFanSpeed(const uint8_t target) { set_fan_speed(target, lcd_tmpfan_speed[target]); } + + #if HAS_FAN0 + FORCE_INLINE static void lcd_setFanSpeed0() { lcd_setFanSpeed(0); } + #endif + #if HAS_FAN1 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 1) + FORCE_INLINE static void lcd_setFanSpeed1() { lcd_setFanSpeed(1); } + #endif + #if HAS_FAN2 || (ENABLED(SINGLENOZZLE) && EXTRUDERS > 2) + FORCE_INLINE static void lcd_setFanSpeed2() { lcd_setFanSpeed(2); } + #endif + + #endif // HAS_LCD_MENU + + #if ENABLED(PROBING_FANS_OFF) + void set_fans_paused(const bool p); + #endif + + #endif // FAN_COUNT > 0 + + static inline void zero_fan_speeds() { + #if FAN_COUNT > 0 + FANS_LOOP(i) fan_speed[i] = 0; + #endif + } + /** * Called from the Temperature ISR */ diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp index 2125736cf..65fcabd5a 100644 --- a/Marlin/src/module/tool_change.cpp +++ b/Marlin/src/module/tool_change.cpp @@ -674,8 +674,8 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n #if ENABLED(SINGLENOZZLE) #if FAN_COUNT > 0 - singlenozzle_fan_speed[active_extruder] = fan_speed[0]; - fan_speed[0] = singlenozzle_fan_speed[tmp_extruder]; + singlenozzle_fan_speed[active_extruder] = thermalManager.fan_speed[0]; + thermalManager.fan_speed[0] = singlenozzle_fan_speed[tmp_extruder]; #endif singlenozzle_temp[active_extruder] = thermalManager.target_temperature[0]; diff --git a/buildroot/share/tests/LPC1768_tests b/buildroot/share/tests/LPC1768_tests index 371619b04..f79cefa00 100755 --- a/buildroot/share/tests/LPC1768_tests +++ b/buildroot/share/tests/LPC1768_tests @@ -36,7 +36,7 @@ opt_set EXTRUDERS 2 opt_set TEMP_SENSOR_0 1 opt_set TEMP_SENSOR_1 5 opt_set TEMP_SENSOR_BED 1 -opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \ +opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_SLOWING \ FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY \ FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \